Ground Engaging Tools – Bulldozer End Bits Bulldozer End Bits General Duty End Bits ● ● ● ●
Provides a thicker wear area than the cutting edge. Made from DH-2 steel in the D3 through D6 sizes. Made from DH-3 steel in the D7 through D11 sizes. For use in most dozing applications.
Utility End Bits ●
● ●
Provides good corner protection in high impact, high abrasion materials. Made from through-hardened DH-2 steel. For use in applications where face wear is a problem.
Extended Wear Life End Bits ●
● ● ● ●
Provides an excellent cutting edge to end bit wear ratio in abrasive conditions. Provides a maximum depth of cut relative to the cutting edge. Provides a thicker wear area than the cutting edge. Made from DH-2 steel in the D4 through D6 sizes. Made from DH-3 steel in the D7 through D11 sizes.
Finish Dozing End Bits ● ● ● ●
Provides a depth of cut equal to the cutting edge. Protects the blade corner in low impact, low abrasion materials. Made from through-hardened DH-2 steel. For use in finish and semi-finish dozing.
65
