CAT Rotary Track Drills HPR1H Martillo Hidraulico Manual de Servicio – PDF DOWNLOAD

BI619439

© Bucyrus All Rights Reserved

BUCYRUS R

Technical Manual

BI619439

TABLE OF CONTENTS

Page No. .....1 Warning Tag ...

Oil Recommendations.. . ...... ... . ...............................1 .........1 Service Procedure and Recommendations ..3 Model ldentification and lnformation Clutch Adjustment . ........11 Clutch Ratings . ....12 ...1 З Pump Mounting Positions Code .........................15 Model Numbers Code .

DisassemЫy and AssemЫy lnstructions for Models .......................22 28000, 59000, and 61 ООО Series.

Parts Ordering lnstruction . .......25,26 . ......... 26 DisassemЫy and AssemЫy for Model 56000 .

BI619439

BI619439

NOTE: This Service Manual contains data referred to Ьу Warning Tag on New or Repaired Transmissions. ,. . _.._..._

The above tag is attached to each new and (ог) repaired unit when it is shipped. lt is for your protection and should not Ье removed until the unit has been properly serviced under the instructions of this manual.

LUBRICATION RECOMMENDATIONS

LUBRICANT ТУРЕ: Any Oil which meets ЕР Gear Lubricant Spec MIL-L-2105C OR API Classification GL-5 LUBRICANT GRADE: Weather Temperature Below -10 ° F (-23 °С) Use 75W Above -10 ° F and up to 100 ° F (37.8 °С) Use B0W-90 Above 100 ° F (37.8 °С} Use 85W-140

FUNK

COFFEYVILLE, KANSAS

SERVICE PROCEDURE PUMP DRIVES

AII applications subject to Funk Engineering Ар· proval.

SERVICE:

The type of service and the operating conditions will determine the maintenance interval. However it is recommended that the oil level Ье checked weekly, at the same time checking for oil leaks.

Because the lubricant system is the heart of the unit, it is especially important that the oil Ье kept clean.

BI619439

SERVICE PROCEDURE AND RECOM М Е NDATIONS: 1.

2.

3.

4.

5.

6.

7.

8.

9.

1О.

11.

Check unit for operational warning tags.

Stop engine before checking or adding oil.

Clean around oil fill before checking or adding oil. lt is recommended that lubricating oil Ье changed after the first 500 hours of service.

Thereafter, and under normal operating conditions, it is recommended that the oil Ье changed after every six months of operation. The oil in the unit should Ье changed whenever the oil level shows traces of dirt or effects of high temperature, evidenced Ьу discoloration or strong odor.

Drain oil while the unit is still warm, examining for contamination or metal particles.

Clean all magnetic drain plugs before replacing.

Always use clean oil in clean containers.

Do not overfill. This will result in overheating and possiЫe malfunction of the unit. Filling instructions, next page.

Fill with MIL-L-2105С or API-GL-5.

Maximum operating oil temperature 225 ° F (107 .2 °С).

LUBRICANT GRADE: Weather Temperature Below -1О ° F (-23 °С) Use 75 W Above -10 ° F and up to 100 ° F (37.8 °С) Use 80W-90 Above 100 ° F (37 .8 °С) Use 85W-140

2

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439

BI619439