Initiate a lock on push

WARNING

Mine safety procedures in regards to shield movement MUST be observed.

If a lock on push is initiated in a Shield the DA ram will push the AFC until the ram stroke meets the target ‘BP LockOnP. Ext’ or until the ‘BP LockOnP.tmo’ timer expires.

1. Press

The default display will prompt the operator to activate the lock on push.

2. Press to activate the lock on push.

Press to stop the Lock on push at anytime.

BP LockOnPush OFF ON

r2 c100 s100 SA-Idle

NOTICE

During a lock on push all ram stroke protection is disabled. Use of lock on push can result in damage to the equipment