Minimum height dump over-ride

from CAT Roof Support BMA Shield PMC-R Operating Manual - PDF DOWNLOAD

Random TCC

If the Motion Monitoring Global protection is switched ON (MotionMonitor glb = 2) and a shield reaches the MinHei.Dump limit the dump valve will be de-energized. A facewide message will have occurred ‘‘MinHei.Dump #ShieldNo’. Both neighbours of the lowered shield will show ‘MinHeight_Oride (ENTER)’ in the default display.

Pressing will override the dump command and energizes the dump valve again. The facewide messages changes from ‘MinHei.Dump #ShieldNo’ to ‘MinHei.Oride #ShieldNo.’.

It will now be possible to set the shield that is below the defined dump limit.

Minimum height dump over-ride

Next Article

Random TCC

More articles from this publication:

Random TCC

Stagger TCC

Initiate in–shield auto TCC

Initiate an adjacent forepole group

Push to Target Sequence (V20 Onwards

MM MinCmpAng

Motion monitoring maximum travel error reset

RCP Broken Chain Warning

Positive set automatic

This article is from:

CAT Roof Support BMA Shield PMC-R Operating Manual - PDF DOWNLOAD