BI620122
Operator’s Manual
Section
15
Dumping Always keep your dump area clean and clear of chunks on the roadway.
STANDARD DUMPING 1. 2. 3. 4. 5. 6. 7. 8.
When approaching to dump a load, release the accelerator pedal and reduce speed (apply brakes). Raise the lift arms to clear any guards or obstructions. In dumping position the lift arms should be fully raised. Push the four-way joystick control lever to the left - the bucket will fully dump. When dumping into a boot, care should be taken to avoid damaging the structure of the boot. Approach the boot with the lift arms raised sufficiently to clear the tailgate. Move in as far as possible without damaging either machine and dump the load. In most cases it will be necessary to roll back the bucket before moving the machine away from the boot. Once clear of the boot lower bucket to the carry position.
Do not carry load with the lift arms in a raised position.
EJECTING 1. 2. 3. 4. 5. 6.
Rev. 0
For limited height application raise the bucket as high as possible. Roll it forward until the bottom of the bucket is level with the ground or tilted slightly downward. Push the two-way hydraulic control lever (lever closest to the operator) forward to eject the load. Return the ejector push plate by pulling the two-way hydraulic control lever once all material is removed from the bucket. Roll back the bucket before moving the machine away from the boot. Once clear of the boot lower bucket to the carry position.
FBL-10 LHD/Utility Serial No. 80042
61
