Transfer Gearbox Reassembly
3:1 Using a suitable tool install the input shaft oil seal.
3:2 Using a suitable tool install the output shaft oil seal to the rear casing. Repeat for the front casing.
3:3 Using a suitable tool install the bearing cups into the front and rear casing. DO NOT install shims at this stage.
3:4 Drive out and discard the shimming plugs from each shaft on the rear casing.
3:5 Reinstall each of the gear shafts into the rear casing. Ensure the threaded holes (arrowed) are uppermost.
3:6 Remove any sealant from the casing halves . Fit the front casing and tighten the bolts equally to the correct torque.
41
