Clutch shaft removal

4:1 Fit suitable lifting equipment to the rear casing of the transmission.

4:3 Remove the 4 plastic plugs and cap screws, and remove the Dual modulating valve.

4:5 Remove the Clamp Bolt and retaining clamp and remove the Speed sensor from the transmission. 4:2 Invert the transmission on a suitable bench. For safety and convenience the bench should have hole in it to accommodate the input shaft and reaction shaft.

4:4 Remove the 4 O Ring seals from the Dual modulating valve.

4:6 Remove the Cap screw and clamp from each of the clutch solenoid valve assemblies

4:7 Prise out the Solenoid valve assemblies from the Transmission Casing 4:8 Remove the Relief valve cartridge

4:9 Remove the Main Pressure regulator valve cartridge

4:11 Lift the Pump housing away from the pump. 4:10 Remove the 4 capscrews that secure the Pump housing to the Main transmission casing.

4:12 Remove the 4 Bolts that secure the pump to the Main transmission casing