BI017744
OPERATING INSTRUCTIONS RH 340 Operation Positioning of the machines
Emergency travel
The auxiliary machine is driven close to the RH 340 from behind (Fig. 2-98:).
Start up the engine of the auxiliary machine. The brakes of the RH 340 are released by travel pressure.
Loosen the high-pressure lines (1, 2, 3 and 4, Fig. 2-99), the control line (5), the leakage oil line (6) and close the open ends of the hoses. Connect the hoses from the auxiliary machine to the ports of the "travel hydraulics" of the excavator. High-pressure hoses (1 and 2) - circuit 1 on auxiliary machine High-pressure hoses (3 and 4) - circuit 2 on auxiliary machine Control line (5) – control system on auxiliary machine Leakage oil line (6) – leakage oil system on auxiliary machine
Initiate the travelling movements carefully with the control levers. Adjust the direction and travelling speed of both tracks accordingly. Shift the control lever to the final position. Make sure the auxiliary machine is able to "follow" The RH 340 can be steered as usual by releasing the one or the other control lever briefly. Drive the excavator out of the hazard zone only.
Do not allow pressure in control line to rise above 30 bars as this will shift the track gears into their “fast” ranges.
Fig. 2-99 :
BA RH340(3 720 350.01)-EN
2-77
