Governor

TURBOCHARGERS

6. Fasten a hoist to turbocharger (7) and remove the bolts that hold it to exhaust manifold (8). Pull turbocharger (7) and the coupling from the exhaust elbow and remove these as a unit from the engine. The weight of the 3508 Turbocharger is 45 kg (100 lb.) and the 3512 Turbocharger is 20 kg (45 lb.).

7. Remove coupling (9) from the turbocharger turbine housing.

8. Do Steps 1 through 7 for the other turbocharger.

Install Turbochargers 1052-12

1. Install coupling (I) in the turbocharger turbine housing.

2. Fasten a hoist to turbocharger (2) and put it and the gasket in position. Put 5P3931 Anti- seize Compound on the threads of the nuts and bolts that hold the turbocharger to the exhaust manifold. Install the bolts and nuts and tighten the nuts to a torque of 54 + 5 N.m (40 + 4 lb. ft.).

313

TURBOCHARGERS

3. Install the O-ring seals on both ends of pipe (3) and put clean engine oil on the seals. Install flange (4) on the pipe and install pipe (3) on the engine.

4. Make sure the gasket is in position and connect oil supply line (5) to the turbocharger.

5. Install the O-ring seal on drain tube (6) and put clean engine oil on it. Install elbow (7) on the drain tube.

6. Install the gaskets, elbow (7) and turbocharger oil drain tube (6) on the engine.

7. Fasten a hoist to air cleaner housing (8) and put it in position on the turbocharger compressor housing. Install the bolts that hold housing (8) to bracket (10) and tighten clamp (9).

8. Install the support assembly between the air cleaner housings.

9. Do Steps I through 8 for the other turbocharger.