Hydraulic Shear
1 PAR. 2
CS Series
General Information
1
2.0
2/3
GENERAL INFORMATION DESCRIPTION Safety instructions
2. SAFETY RULES The attachment has been constructed in conformity with the safety standards listed below: UNI EN ISO 12100
Machine safety - Fundamental Concepts, General design principles, Risk assessment and risk reduction.
UNI EN ISO 13857
Safe Distances from Machinery - Safe distances for preventing the upper limbs from reaching dangerous areas.
UNI EN 349:1993+A1:2008
Safe Distances from Machinery - Minimum distances to avoid crushing parts of the human body.
UNI EN 474-1:2006+A3:2013 NOTE 2.1
Machine Safety - General Requirements
UNI EN 474-5:2006+A3:2013
Machine Safety - General Requirements - Requirements for hydraulic excavators
ATTENTION! The standards in this manual may not protect from specific situations that may arise during different stages of work. .
1
GENERAL INFORMATION
PAR.
Preparations the customer is responsible for
3 PREPARATIONS THE CUSTOMER IS RESPONSIBLE FOR Except where contractually agreed otherwise, the customer is normally responsible for: Preparing the environment / work area and work equipment in accordance with specific safety and required by the applicable laws in the country to use the equipment; Check in accordance with specific safety and required by the applicable laws in the country to use the equipment correctly matched to the machine;
Power hydraulic equipment, in accordance with the regulations in the country of use and the specifications in this manual;
ATTENTION! It is a customer / end user responsibility to integrate the instructions contained in this user manual and system maintenance / assembly and provide any additional information to the operator.
9/47
Translated by the original
GENERAL INFORMATION
3
DESCRIPTION
