Noise

1

GENERAL INFORMATION

PAR. DESCRIPTION

2 Safety instructions

2. SAFETY RULES

The attachment has been constructed in conformity with the safety standards listed below:

UNI EN ISO 12100

UNI EN ISO 13857

UNI EN 349:1993+A1:2008

UNI EN 474-1:2006+A3:2013 NOTE 2.1

UNI EN 474-5:2006+A3:2013

Machine safety - Fundamental Concepts, General design principles, Risk assessment and risk reduction.

Safe Distances from Machinery - Safe distances for preventing the upper limbs from reaching dangerous areas.

Safe Distances from Machinery - Minimum distances to avoid crushing parts of the human body.

Machine Safety - General Requirements

Machine Safety - General Requirements - Requirements for hydraulic excavators

ATTENTION! The standards in this manual may not protect from specific situations that may arise during different stages of work.

.

1

GENERAL INFORMATION

PAR. DESCRIPTION

3 Preparations the customer is responsible for

3 PREPARATIONS THE CUSTOMER IS RESPONSIBLE FOR

Except where contractually agreed otherwise, the customer is normally responsible for:

 Preparing the environment / work area and work equipment in accordance with specific safety and required by the applicable laws in the country to use the equipment;

 Check in accordance with specific safety and required by the applicable laws in the country to use the equipment correctly matched to the machine;

 Power hydraulic equipment, in accordance with the regulations in the country of use and the specifications in this manual;

ATTENTION! It is a customer / end user responsibility to integrate the instructions contained in this user manual and system maintenance / assembly and provide any additional information to the operator.