OPERATING INSTRUCTIONS BEFORE STARTING THE ENGINE 1. Do a daily walk around, visual inspection of the machine. Check for such items as hoses rubbing against other components, oil leaks, debris or trash buildup, loose bolts, damaged, or missing parts that would effect the normal and safe operation of the machine. Make any necessary corrections before operating the machine.
3. Check that the machine fuel tank is filled with clean fuel that has the specification given in this manual.
WARNING: DO NOT operate the machine while under the influence of alcohol or drugs. CM112
RUN - IN PROCEDURE It is impor tant that the run-in i n s t r u c t i o n s fo r a n ew e n g i n e b e followed. Proper run-in will increase engine power and service life. If the engine is not run-in properly, the piston rings and cylinder bore can be damaged.
2. Operate the machine with normal loads as much as possible. 3. Monitor the engine instruments frequently during operation. Reduce throttle and/or load if the coolant temperature exceeds safe operating limits.
During the first 100 hours of operation, operate the machine as follows: 1. Do not run the engine at idle speed for long periods of time.
97
TRIM THIS EDGE Bur 6-36651na RIGHT PAGE (First)
TRIM THIS EDGE
!
2. See the Maintenance Chart in this manual and do the items in the 10 Hour section.
