BEFORE YOU OPERATE

OPERATING INSTRUCTIONS

BEFORE STARTING THE ENGINE

1.Do a daily walk around, visual inspection of the machine. Check for such items as hoses rubbing against other components, oil leaks, debris or trash buildup, loose bolts, damaged, or missing parts that would effect the normal and safe operation of the machine.

Make any necessary corrections before operating the machine. 2.See the Maintenance Chart in this manual and do the items in the 10

Hour section. 3.Check that the machine fuel tank is filled with clean fuel that has the specification given in this manual.

WARNING: DO NOT operate the machine while under the influence of alcohol or drugs.

CM112

RUN - IN PROCEDURE

It is important that the run-in instructions for a new engine be followed. Proper run-in will increase engine power and service life. If the engine is not run-in properly, the piston rings and cylinder bore can be damaged. During the first 100 hours of operation, operate the machine as follows: 1.Do not run the engine at idle speed for long periods of time. 2.Operate the machine with normal loads as much as possible. 3.Monitor the engine instruments frequently during operation.

Reduce throttle and/or load if the coolant temperature exceeds safe operating limits. TRIM THIS EDGE

97

TRIM THIS EDGE

Bur 6-36651na

RIGHT PAGE (First)