8
1850K
STABILITY POSITION OF CENTER OF GRAVITY In transportation conditions Note: the centre of gravity depends upon the position of the equipment. For inches device by 25.4
MACHINE W/ BLADE & RIPPER
X
Z
1285 mm 835 mm W/ blade and ripper on the ground 50.59 in 32.87 in W/ blade on ground and ripper at max. height
1320 mm 880 mm 51.96 in 34.64 in
W/ blade at max. height and ripper 1270 mm 930 mm on ground 50 in 36.61 in
Z X
W/blade at max. height and ripper 1310 mm 980 mm at max. height 51.57 in 38.58 in
MACHINE W/ BLADE ONLY
X
1850-2M0008
Z
Blade on the ground
1575 mm 780 mm 62 in 30.70 in
Blade at max. height
1565 mm 935 mm 61.61 in 36.81 in Z X 1850-2M0009
X MACHINE W/OUT BLADE AND W/OUT RIPPER
Z
1230 mm 910 mm 48.42 in 35.82 in
Z WARNING
X
The machine, as delivered by the plant, is not intended for any other application and, in particular, should not be considered for use as a mean for hooking, lifting or moving suspended loads. Any different usage, therefore, MUST BE AVOIDED, unless the machine has been originally provided, by the manufacturer, with special equipment and particular instructions for specific applications.
Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
1850-2M0010
