1 minute read
Stability
POSITION OF CENTER OF GRAVITY
In transportation conditions
STABILITY
Note: the centre of gravity depends upon the position of the equipment. For inches device by 25.4
MACHINE W/ BLADE & RIPPER X Z
W/ blade and ripper on the ground 1285 mm 835 mm 50.59 in 32.87 in W/ blade on ground and ripper 1320 mm 880 mm at max. height 51.96 in 34.64 in W/ blade at max. height and ripper1270 mm 930 mm on ground 50 in 36.61 in W/blade at max. height and ripper 1310 mm 980 mm at max. height 51.57 in 38.58 in
Z
MACHINE W/ BLADE ONLY X Z
Blade on the ground 1575 mm 780 mm 62 in 30.70 in
Z X
X
X Z
MACHINE W/OUT BLADE 1230 mm 910 mm AND W/OUT RIPPER 48.42 in 35.82 in
WARNING The machine, as delivered by the plant, is not intended for any other application and, in particular, should not be considered for use as a mean for hooking, lifting or moving suspended loads. Any different usage, therefore, MUST BE AVOIDED, unless the machine has been originally provided, by the manufacturer, with special equipment and particular instructions for specific applications. Z
X
1850-2M0008
1850-2M0009
1850-2M0010
