Lubricants, fluids and capacities ..................................5

Maintenance

Lubricants and fluid capacities

Table 1: Lubricants and fluid capacities Location

Hydraulic oil tank Crawler Idler roller GH Assembly CLA Primary GH Assembly CLA POT Tram Drive Assembly Drum Drive Assembly, high speed (back) Drum Drive Assembly, low speed (front) Motor Lube Hoses

Specification

Spec. 100-1 Spec. 100-3 Spec. 100-15 Spec. 100-15 Spec. 100-15 Spec. 100-15

Spec. 100-15

Spec. 100-14

Approximate capacity Notes

75 gals. (284 L) 1 gal (3.79 L) 1 gal (3.79 L) 2.5 gal (9.46 L) 3 gal (11.36 L) 0.5 gallon (1.89 L)

5 gal (18.93 L)

variable 1

Notes: 1. All motor lube hoses are to be filled with high temperature synthetic lithium complex grease (Spec. 100-14) before assembling them to the electric motor to ensure that there are no air gaps between the grease nipple and the point where the grease enters the motor.

IMPORTANT! As lubrication technology evolves, manufacturers continue to reformulate their products to obtain improved characteristics regarding wear, water dispersion, water absorption, environmental impact and a variety of other performance criteria. When an approved lubricant on this list has been superseded by a new formulation, it is recommended that the new formulation be tested to ensure compliance with the appropriate specification. At a minimum, a statement of conformance from the lubricant supplier should be obtained.

Reference Permissible Media in Chapter 6 for approved lubricants and specifications.