Installation

F-code Section C-code

PS S3.1 3500 Drive Wheel

Version no T-code

001

4.2. Installation

1.Press drive tire (2) onto wheel hub (2). This is usually done while pressing off old tire. Press hub to center of tire.

2.Install drive tire and hub on axle. The drive tire retaining nut should be torqued to 250 ft-lb [339

N•m]. Failure to use a new nut could result in damage to the wheel and/or transmission.

2 1

3

Torque to 250 ft-lb [339 N•m]

NOTE! Replace axle nut with new nut each time drive axle is removed. Failure to replace with new nut could result in damage to drive wheel and/ or transmission.