Figure OI-56
TRANSPORTING THE BOBCAT LOADER Figure OI-55
The rear of the trailer must be blocked or supported [Figure OI-55] when loading or unloading the loader to prevent the front end of the trailer from raising up. Use the following procedure to fasten the Bobcat loader to the transport vehicle to prevent the loader from moving during sudden stops or when going up and down slopes. Fully lower any bucket or att achment. Stop the engine. Engage the parking brake.
Fasten chains at the front using the slot s in the axle gussets [Figure OI-56]. Counterweight is removed to show clarity. DO NOT operate with counterweight removed. Figure OI-57
Fasten the rear of the loader as shown with a loop of chain through the tie down provided [Figure OI-57].
48 of 108
OI-26
Operation and Maintenance Manual
Dealer Copy -- Not for Resale
A loader with an empty bucket or no att achment must be loaded backward onto the transport vehicle [Figure OI55].
