OPERATING PROCEDURE (CONT’D)
Digging Into The Ground
Emptying The Bucket
Figure OI-50
Put the lift arms all the way dow n. Push the top of the tilt pedal until the cutting edge of the bucket is on the ground. Drive forward slowly and continue to tilt the bucket down until it enters the ground [Figure OI-50].
Push down on the bottom of the lif t pedal to raise the lif t arms [Figure OI-49]. Push the top of the tilt pedal while raising the lift arms to level the bucket or attachment and help prevent material from falling of f the back of the bucket or attachment.
Figure OI-51
Drive forward slowly until the bucket is over the top of the truck box or bin. Push the top of the tilt pedal until the bucket is empty [Figure OI-49]. If all the material is near the side of the truck or bin, push it to the other side with the bucket.
WARNING Never dump over an obstruction, such as a post, that can enter the operator cab. The machine could tip forward and cause injury or death. W-2057-0694
Push the bottom of the tilt pedal a small amount to increase traction and keep an even digging depth [Figure OI-51]. Continue to drive forward until the bucket is full. When the ground is hard, raise and lower the cutting edge of the bucket with the tilt pedal while driving forward slowly.
45 of 108
OI-23
Operation and Maintenance Manual
Dealer Copy -- Not for Resale
Figure OI-49
