DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Information
Main
InsydelH20 Setup Utility Security Boot
Item Specific Help
Boot priority order : 1. IDE0 : TOSHIBA MK2555GSX 2. IDE1 : 3. Network Boot : Atheros Boot Agent 4. USB HDD : 5. USB CDROM : 6. USB FDD :
F1 Help Es c Exit
3.
Select Item Select Menu
Rev. 3.5 Exit
Use < > or < > to select a device, then press <F6> to move it up the list, or <F5> to move it down the list. Press <Esc> to escape the menu
F5/F6 Enter
C h a n g e Va l u e s Select Su b - M e n u
F9 F10
Setup Default Save and Exit
Execute the FLASH.BAT batch file to update BIOS.
The flash process begins as shown.
4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue. 5.
32
Flash is complete when the message Flash programming complete displays.
Chapter 2
