53:T661,21 Specifications 21.4 Vibrations emitted by the machines Results of inspections: Machine Entire body in m/s² (Threshold value < 0.5) Hand-arm in m/s² (Threshold value < 2.5) VRD trench Backfill Travel on grass VRD trench Backfill Travel on grass SV15 < 0,5 1,1 0,8 < 2,5 < 2,5 < 2,5 SV17 < 0,5 1,0 1,0 < 2,5 < 2,5 < 2,5 SV17EX < 0,5 0,9 0,9 < 2,5 < 2,5 < 2,5 These are mean acceleration values established according to the cycles below. Rounded values Measurements made: • VRD Trench: 5 digging and dumping cycles to the left at 45°. • Backfill: 3 backfill cycles. • Travel on grass: One to and fro trip of about 1 minute with numerous changes in direction. Measured in accordance with the ISO EN 1032 (2003) standard for the entire body and with the NF EN ISO 53491 (2002) and NF EN ISO 5349-2 (2001) standards for the arm system. Note: These values are declared in accordance with the directive 98/37/CE and do not correspond to exposure values for 8 hours of work. To transmit minimum vibrations over the entire body during operation of the machine and avoid harming the operator's health, it is recommended that the following measures be taken: • Adjust the seat according to the operator's height. • Maintain the ground in a good condition. • Use the machine under suitable conditions, by considering the actual ground conditions and the specific effects of vibrations caused by the actual operating mode of the machine. • It is recommended that the operator acquaint himself with and retain the instructions relating to the setting up and use of attachments. 8854:T54a,21 Specifications 21.5 Lifting capacity Lifting capacity for SV15 Machine with canpoy and rubber tracks. Bucket width: 400 mm Bucket weight: 38 kg A : Overhang from the axis of rotation B : Bucket height in meters C : Load point A P B C 000917-00X Longitudinal boom Transverse boom Blade down Unit : (kg) A (m) Max 2,5 m 2,0 m 1,5 m B (m) 2,5 230 *305 - - - - - - 2,0 185 *3