2007 Honda Element EX 2007-08 GENERAL INFORMATION Specifications - Element
2007-08 GENERAL INFORMATION Specifications - Element
STANDARDS AND SERVICE LIMITS ENGINE ELECTRICAL ENGINE ELECTRICAL SPECIFICATION Item Measurement Qualification Rated voltage Ignition coil Firing order Type Spark plug Gap
Standard or New 12V 1-3-4-2 NGK:IZFR6K11 1.0-1.1 mm (0.0390.043 in.) 8 ± 2° BTDC 8 ± 2° BTDC Auto-tensioner
Ignition timing Drive belt
At idle Check the red M/T (in neutral) mark A/T (in N or P position) Tension At 13.5 V and normal engine Output 105A temperature Coil (rotor) resistance At 68°F (20°C) 2.5 ohms
Alternator
Slip ring O.D.
--
14.0 mm (0.55 in.) 1.5 mm (0.06 10.5 mm (0.41 in.) in.) 3.2 N (0.33 kgf, 0.7 lbf) 1.6 kW 0.40-0.50 mm (0.016- 0.15 mm 0.020 in.) (0.006 in.) 0.02 mm (0.001 in.) 0.05 mm max. (0.002 in.) 28.0-28.1 mm (1.102- 27.5 mm 1.106 in.) (1.083 in.) 11.1-11.5 mm (0.44- 4.3 mm (0.17 0.45 in.) in.) 14.4 mm (0.57 in.)
Brush length Brush spring tension Output Commutator mica depth Starter
Service Limit
Commutator runout Commutator O.D. Brush length
ENGINE ASSEMBLY ENGINE ASSEMBLY SPECIFICATION Item Measurement
Qualification
Pressure Check with the starter cranking the Minimum Compression engine Maximum
Standard or New 930 kPa (9.5 kgf/cm2 , 135 psi) 200 kPa (2.0 kgf/cm2 , 28
Microsoft Saturday, August 22, 2009 8:50:17 8:50:13 AM
Page 1
© 2005 Mitchell Repair Information Company, LLC.