Kia Texton Immobiliser Key Teaching Guide Manual

Texton Immobiliser Key Teaching Guide This guide cover vehicles fitted with Texton and Texton by Shinchang in-key immobiliser systems, including •

Credos

•

Shuma

•

Spectra

•

AL Sportage (Up to 2003MY)

•

GQ Carnival (Up to 2005MY)

•

BC Rio (Up to 2005MY)

KIA MOTORS AUSTRALIA

KIA IMMOBILISER KEY IDENTIFICATION Credos Green Head

Texton by Shinchang

Black Head

Texton

AL Sportage (1998 ~ 2003) Deep Blue Head

Texton Shuma / Carens Black Head (Zylux Immobiliser)

Refer to Service Bulletin 183-61-24

BC Rio (Up to Feb 2002) Black Head (Zylux Immobiliser)

Refer to Service Bulletin 183-61-24

Green Head

Texton by Shinchang Spectra (Feb 2002- on ) Green Head

Texton by Shinchang BC Rio (Feb 2002- 2005) Green Head

Texton by Shinchang

2

GQ Carnival (2000 ~ 2005) Series 1 Deep Blue Head

Series 2 Blue Head

Texton

Texton by Shinchang Series 3 Grey Head

Texton by Shinchang

Note – Always check the VIN and build date and confirm the part number with your Parts Department before ordering any parts.

Note Some Rio, Shuma and Carens vehicles are fitted with locally supplied Zylux Immobilisers. For repair and service information refer to Service Bulletin 183-61-24.

For assistance with Zylux immobiliser systems call Zylux Technical Support (03) 9482 2203 In addition, Pregio, K2700 and K2900 are fitted with an RKE & Immobiliser system supplied by Vision.

For repair and service information refer to Service Bulletin 333-61-50.

For assistance with Vision immobiliser systems call Vision Technical Support 1 800 035 694

3

TEXTON & TEXTON BY SHINCHANG KEY TEACHING PROCEDURES USING HISCAN PRO NOTE - The following procedure details the process when using Hiscan – if using GDS, the process is similar, but the GDS screens and menus will differ.

STEP FUNCTION

SCREEN DISPLAYED

1.

Connect the Hiscan Pro to the vehicle. Use the external power cable to ensure continuous operation of the Hiscan during these procedures

2.

Turn the Hiscan Pro ON.

3.

Press the “Enter” key.

4.

Select “Vehicle Diagnosis”.

5.

Select the vehicle (In this case “Sportage”).

Select the model year.

The model year is the 10th Digit of the VIN T = 1996, V = 1997 7.

W = 1998, X = 1999 Y = 2000, 1 = 2001 2 = 2002, 3 = 2003 4 = 2004, 5 = 2005 6 = 2006 4

Hiscan will remind you of the correct colour of the Hiscan DLC cable you must use.

8.

Select “Immobiliser”.

9.

Select the correct engine type (In this case “2.0 DOHC”).

10.

This screen gives 2 options.

They are: 01. Encoding Immobiliser.

02. VIM & ECM Diagnosis.

Turn the ignition key OFF before continuing.

INKEY TYPE IMMOBILISER 01. ENCODING IMMOBILISER 02. VIM & ECM DIAGNOSIS

SET IG. KEY OFF

To perform key teaching/coding, select 01. ENCODING IMMOBILISER

SELECT ONE OF THE UPPER ITEMS !!

5

To perform “Key Check” (This is for Deep Blue Keys only) Important Note - If new Keys are being entered into a ‘Deep Blue Key’ immobiliser system, the “Key Check” function must be performed with the Hiscan Pro, prior to going into “Normal Coding” or “Key Only Matching” to verify that the Key has been initialised. If the key has not been initialised, “Key Writing” must be performed prior to performing ‘Normal Coding’.

VIM & ECM CHECK

1.

Turn the ignition key ON Select “VIM & ECM Diagnosis”.

Select “Key Check (Encrypt Type)”.

01. VIM CHECK 02. ECM CHECK 03. KEY CHECK (ENCRYPT TYPE)

SET IG. KEY ON

KEY CHECK (ENCRYPT TYPE)

2.

Turn the ignition OFF

01. KEY CHECK 02. KEY WRITING

Select “Key Check”.

SET IG. KEY OFF

3.

KEY CHECK

The Key status is displayed.

(RESULT) In this case, the key is “Initialised”.

If the key is not initialised, proceed to “Key Writing”

KEY STATUS

: GOOD : KEY IS INITIALISED

RECOMMEND - If no start, perform (NORMAL CODING)

6

To perform “Key Writing” (This is for Deep Blue Keys only) Important Note - If new Keys are being entered into a ‘Deep Blue Key’ immobiliser system, the “Key Check” function must be performed with the Hiscan Pro, prior to going into “Normal Coding” or “Key Only Matching” to verify that the Key has been initialised. If the key has not been initialised, “Key Writing” must be performed prior to performing ‘Normal Coding’.

Ensure that “Key Check” has been completed first to check the key status.

VIM & ECM CHECK

1.

Turn the ignition key ON Select “VIM & ECM Diagnosis”.

01. VIM CHECK 02. ECM CHECK 03. KEY CHECK (ENCRYPT TYPE)

SET IG. KEY ON

Select “Key Check (Encrypt Type)”.

KEY CHECK (ENCRYPT TYPE)

2.

Turn the ignition OFF

01. KEY CHECK 02. KEY WRITING

Select “Key Writing”.

SET IG. KEY OFF

KEY CHECK (ENCRYPT TYPE)

3.

Key writing successful.

Key Writing is Successful.

7

ENCODING IMMOBILISER – Texton & Texton by Shinchang To perform Normal Coding •

Normal coding is used to teach the first 2 keys to a virgin/neutralised immobiliser.

•

Always ensure at least 2 keys are available.

Important Note - If new Keys are being entered into a ‘Deep Blue Key’

then it may be necessary to perform “Key Check” and “Key Writing” prior to performing ‘Normal Coding’.

Note – Texton & Texton by Shinchang Immobiliser Coding are similar. Ensure you follow the Hiscan directions when performing any immobiliser encoding operations.

Select “Encoding Immobiliser”.

INKEY TYPE IMMOBILISER 01. ENCODING IMMOBILISER 02. VIM & ECM DIAGNOSIS

SET IG. KEY OFF

Select one of the upper items !!

ENCODING IMMOBILISER

1.

Turn the ignition OFF Select “Normal Coding”.

01. NORMAL CODING 02. NEUTRALISATION 03. CODE CHANGE 04. KEY ONLY MATCHING

SET IG. KEY OFF

Select one of the upper items !!

8

NORMAL CODING

2.

Enter the immobiliser access code.

(This can be obtained from your Kia Technical Assistance).

An incorrect code will not be accepted.

ENTER THE PASSCODE

___

Once the 5th digit has been entered, the next screen will automatically be displayed.

3.

The following message appears..

“Please Wait !!

It takes about 5~8 seconds”.

4.

• The horn will sound.

• Turn the ignition key ON for 2 seconds then turn it OFF.

“Please Wait !!

It takes about 5 ~ 8 seconds”

NORMAL CODING STEP 1. After horn sound, turn IG. Key (ON)

• For Black and Deep Blue keys, depress the rear demister switch.

2. Depress accel pedal or rear Def. SW

• Early Sportage must have the accelerator pedal pressed.

3. Turn first key (ON) and pull it out.

• Vehicles with Green, Blue or Grey keys do not require this.

for 2 seconds and turn it off. and confirm horn sound.

4. Set second key (ON) and check horn.

• The horn will sound.

• Using the 1st key, turn ignition ON for 1 second and remove key.

• Insert 2nd key and turn ignition ON for 1 second and turn it OFF. • The horn will sound.

9

5.

The following message appears..

“Coding OK” (Successful).

For more information, press enter.

6.

The Coding result will be displayed.

CODING OK !!

FOR MORE PRESS (ENT) KEY

CODING RESULT 2 KEYS MATCHED ANTENNA COIL ECM COM. ACCEL/DEF. SW IGNITION SEQ. WAKE UP VIM CONDITION VIM PASSCODE

: : : : : : :

OK OK OK OK OK OK XXXXX

CODING RESULT : GOOD

10

To perform Key Only Matching •

Key only matching is used to add additional keys after the first 2 keys have been coded. All valid keys must available.

•

Keys not coded during ‘Key Only Matching’ will no longer operate.

Select “Encoding Immobiliser”.

1.

Turn the ignition OFF Select “Key Only Matching”.

ENCODING IMMOBILISER 01. NORMAL CODING 02. NEUTRALISATION 03. CODE CHANGE 04. KEY ONLY MATCHING

SET IG. KEY OFF

Select one of the upper items !!

KEY ONLY MATCHING

2.

Enter the total number of keys to be matched, including keys that are already matched.

For example If 2 keys are currently coded and you want to introduce 1 more key, you must enter “3” at this stage.

ENTER THE NUMBER OF KEYS TO MATCH

___EA (1 TO 5 AVAILABLE) BLUE KEY : 1 TO 4

KEY ONLY MATCHING

3.

In this case, 2 keys are being entered.

(Once this is completed, only 2 keys will start the vehicle).

ENTER THE NUMBER OF KEYS TO MATCH

2 EA (1 TO 5 AVAILABLE) BLUE KEY : 1 TO 4

11

KEY ONLY MATCHING

4.

Enter the Immobiliser access code.

ENTER THE PASSCODE

___

KEY ONLY MATCHING

5.

• Verify that the horn sounds.

• Insert 1st key, turn ignition ON for 2 seconds and remove key.

1. CHECK THE HORN SOUNDS

• Insert 2nd key, turn ignition ON for 2 seconds and remove key.

3. REPEAT STEP 2 WITH THE REST OF

2. TURN FIRST KEY ON FOR 2 SEC AND PULL IT OUT. KEYS TO MATCH 4. CONFIRM THE RESULT

• Repeat this process until all the keys are matched.

6.

The coding result will appear.

For more information, press “Enter”.

CODING OK !!

FOR MORE, PRESS (ENT) KEY

KEY ONLY MATCHING RESULT 1. NUMBER OF KEYS TO MATCH :

7.

Key Matching Result information will be displayed.

2

EA

2. NUMBER OF KEYS TO MATCHING : 2 EA 3. KEY MATCHING RESULT : GOOD

12