Aficio Mpc2051 Aficio Mpc2551 Service Manual Parts List

D104/D106 SERVICE MANUAL 006369MIU MAINFRAME

D104/D106 SERVICE MANUAL (MAINFRAME)

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

D104/D106 SERVICE MANUAL (MAINFRAME)

006369MIU

It is the reader's responsibility when discussing the information contained within this document to maintain a level of confidentiality that is in the best interest of Ricoh Americas Corporation and its member companies.

NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FASHION AND DISTRIBUTED WITHOUT THE PRIOR PERMISSION OF RICOH AMERICAS CORPORATION. All product names, domain names or product illustrations, including desktop images, used in this document are trademarks, registered trademarks or the property of their respective companies.

They are used throughout this book in an informational or editorial fashion only and for the benefit of such companies. No such use, or the use of any trade name, or web site is intended to convey endorsement or other affiliation with Ricoh products.

Š 2011 RICOH Americas Corporation. All rights reserved.

WARNING The Service Manual contains information regarding service techniques, procedures, processes and spare parts of office equipment distributed by Ricoh Americas Corporation.

Users of this manual should be either service trained or certified by successfully completing a Ricoh Technical Training Program.

Untrained and uncertified users utilizing information contained in this service manual to repair or modify Ricoh equipment risk personal injury, damage to property or loss of warranty protection.

Ricoh Americas Corporation

LEGEND PRODUCT CODE D104

GESTETNER MP C2051

D106

MP C2551

COMPANY LANIER RICOH LD 620C Aficio MP C2051

SAVIN C9120

LD 625C

C9125

Aficio MP C2551

DOCUMENTATION HISTORY REV. NO. *

DATE 02/2011

COMMENTS Original Printing

D104/D016 TABLE OF CONTENTS

PRODUCT INFORMATION 1. PRODUCT INFORMATION .......................................................... 1-1 1.1 SPECIFICATIONS ......................................................................................1-1 1.2 MACHINE CONFIGURATION ....................................................................1-2 1.2.1 MACHINE D104/D106 .......................................................................1-2 OTHER: ................................................................................................1-4 1.3 OVERVIEW ................................................................................................1-6 1.3.1 MECHANICAL COMPONENT LAYOUT ............................................1-6 1.3.2 PAPER PATH ....................................................................................1-8 With options ..........................................................................................1-8 Without options .....................................................................................1-9 1.3.3 DRIVE LAYOUT ..............................................................................1-10 1.4 GUIDANCE FOR THOSE WHO ARE FAMILIAR WITH PREDECESSOR PRODUCTS....................................................................................................1-11

INSTALLATION 2. INSTALLATION ............................................................................ 2-1 2.1 INSTALLATION REQUIREMENTS ............................................................2-1 2.1.1 ENVIRONMENT ................................................................................2-1 2.1.2 MACHINE LEVEL ..............................................................................2-2 2.1.3 MACHINE SPACE REQUIREMENTS ...............................................2-2 2.1.4 POWER REQUIREMENTS ...............................................................2-2 2.2 OPTIONAL UNIT COMBINATIONS ............................................................2-3 2.2.1 MACHINE OPTIONS .........................................................................2-3 2.2.2 CONTROLLER OPTIONS .................................................................2-4 2.3 COPIER INSTALLATION............................................................................2-5 2.3.1 POWER SOCKETS FOR PERIPHERALS ........................................2-5 2.3.2 INSTALLATION FLOW CHART.........................................................2-6 2.3.3 ACCESSORY CHECK .......................................................................2-7 2.3.4 INSTALLATION PROCEDURE .........................................................2-9 SM

i

D104/D016

Tapes and Retainers ...........................................................................2-10 Developer and Toner Bottles ..............................................................2-12 Paper Trays ........................................................................................2-16 Emblem and Decals ............................................................................2-17 Initialize the Developer ........................................................................2-18 Settings Relevant to the Service Contract...........................................2-19 Settings for @Remote Service ............................................................2-20 2.3.5 MOVING THE MACHINE ................................................................2-23 2.3.6 TRANSPORTING THE MACHINE...................................................2-24 Main Frame .........................................................................................2-24 2.4 PAPER FEED UNIT (D331) ......................................................................2-25 2.4.1 ACCESSORY CHECK .....................................................................2-25 2.4.2 INSTALLATION PROCEDURE .......................................................2-26 2.5 PAPER FEED UNIT (D425) ......................................................................2-28 2.5.1 COMPONENT CHECK ....................................................................2-28 2.5.2 INSTALLATION PROCEDURE .......................................................2-29 2.6 CASTER TABLE (D488) ...........................................................................2-32 2.6.1 COMPONENT CHECK ....................................................................2-32 2.6.2 INSTALLATION PROCEDURE .......................................................2-33 2.7 ARDF (D366) ............................................................................................2-35 2.7.1 COMPONENT CHECK ....................................................................2-35 2.7.2 INSTALLATION PROCEDURE .......................................................2-36 2.8 PLATEN COVER INSTALLATION (G329)................................................2-39 2.9 SIDE TRAY (D427) ...................................................................................2-40 2.9.1 COMPONENT CHECK ....................................................................2-40 2.9.2 INSTALLATION PROCEDURE .......................................................2-41 2.10 1-BIN TRAY UNIT (D426) ...................................................................2-43 2.10.1 COMPONENT CHECK ................................................................2-43 2.10.2 INSTALLATION PROCEDURE ...................................................2-44 2.11 SHIFT TRAY UNIT (D428) ..................................................................2-46 2.11.1 COMPONENT CHECK ................................................................2-46 2.11.2 INSTALLATION PROCEDURE ...................................................2-47 2.12 INTERNAL FINISHER (D429) .............................................................2-49 2.12.1 COMPONENT CHECK ................................................................2-49 2.12.2 INSTALLATION PROCEDURE ...................................................2-50 Preparing before Installing the Internal Finisher ..................................2-50 Internal Finisher Installation ................................................................2-52 2.13 PUNCH UNIT (D390) ..........................................................................2-55 D104/D016

ii

SM

2.13.1 COMPONENT CHECK ................................................................2-55 2.13.2 INSTALLATION PROCEDURE ...................................................2-56 Removing the Internal Finisher ...........................................................2-56 Preparing the Punch Unit before Installing the Internal Finisher .........2-59 Installing the Punch and Inverter Unit .................................................2-61 Preparing the Internal Finisher ............................................................2-63 Installing the Internal Finisher .............................................................2-64 2.14 ENVELOPE FEEDER EF3010 (D559) ................................................2-67 2.14.1 COMPONENT CHECK ................................................................2-67 2.14.2 INSTALLATION PROCEDURE ...................................................2-68 2.15 CARD READER BRACKET TYPE C5501 (D547) ..............................2-69 2.15.1 COMPONENT CHECK ................................................................2-69 2.15.2 INSTALLATION PROCEDURE ...................................................2-70 2.16 USB2.0/SD SLOT TYPE G (D556) .....................................................2-71 2.16.1 ACCESSORY CHECK.................................................................2-71 2.16.2 INSTALLATION PROCEDURE ...................................................2-71 2.16.3 TESTING THE SD CARD/USB SLOT .........................................2-75 2.17 MECHANICAL COUNTER (NA ONLY) ...............................................2-76 2.17.1 INSTALLATION PROCEDURE ...................................................2-76 2.18 KEY COUNTER BRACKET ................................................................2-78 2.18.1 INSTALLATION PROCEDURE ...................................................2-78 2.19 KEY COUNTER INTERFACE UNIT....................................................2-80 2.19.1 INSTALLATION PROCEDURE ...................................................2-80 2.20 ANTI-CONDENSATION HEATER ......................................................2-82 2.20.1 INSTALLATION PROCEDURE ...................................................2-82 2.21 TRAY HEATER ...................................................................................2-85 2.21.1 INSTALLATION PROCEDURE ...................................................2-85 Mainframe ...........................................................................................2-85 Tray Heater for D425 (Option) ............................................................2-85 Tray Heater for D331 (Option) ............................................................2-89 2.22 CONTROLLER OPTIONS ..................................................................2-93 2.22.1 OVERVIEW .................................................................................2-93 I/F Card Slots ......................................................................................2-93 SD Card Slots .....................................................................................2-93 USB Slots ............................................................................................2-93 2.22.2 SD CARD APPLI MOVE ..............................................................2-94 Overview .............................................................................................2-94 Move Exec ..........................................................................................2-95 SM

iii

D104/D016

Undo Exec ..........................................................................................2-95 2.22.3 POSTSCRIPT 3 ...........................................................................2-97 2.22.4 FILE FORMAT CONVERTER .....................................................2-99 2.22.5 IEEE1284 ..................................................................................2-100 2.22.6 IEEE 802.11 A/G, G (WIRELESS LAN) .....................................2-101 Installation Procedure .......................................................................2-101 UP Mode Settings for Wireless LAN .................................................2-102 SP Mode and UP Mode Settings for IEEE 802.11 a/g, g Wireless LAN2-104 2.22.7 BLUETOOTH.............................................................................2-105 2.22.8 PICTBRIDGE .............................................................................2-106 2.22.9 BROWSER UNIT TYPE E .........................................................2-107 Installation Procedure .......................................................................2-107 2.22.10 GIGABIT ETHERNET ..............................................................2-109 2.22.11 CHECK ALL CONNECTIONS .................................................2-111

PREVENTIVE MAINTENANCE 3. PREVENTIVE MAINTENANCE .................................................... 3-1 3.1 MAINTENANCE TABLES ...........................................................................3-1 3.2 PM PARTS SETTINGS...............................................................................3-2 3.2.1 BEFORE REMOVING THE OLD PM PARTS ....................................3-2 3.2.2 AFTER INSTALLING THE NEW PM PARTS ....................................3-3 3.2.3 PREPARATION BEFORE OPERATION CHECK ..............................3-4 3.2.4 OPERATION CHECK ........................................................................3-4

REPLACEMENT AND ADJUSTMENT 4. REPLACEMENT AND ADJUSTMENT......................................... 4-1 4.1 BEFOREHAND ...........................................................................................4-1 4.2 SPECIAL TOOLS .......................................................................................4-2 4.3 IMAGE ADJUSTMENT ...............................................................................4-3 4.3.1 SCANNING ........................................................................................4-3 Scanner sub-scan magnification ...........................................................4-3 Scanner leading edge and side-to-side registration ..............................4-4 4.3.2 ARDF .................................................................................................4-5 ARDF side-to-side, leading edge registration and trailing edge ............4-5 ARDF sub-scan magnification ...............................................................4-6 4.3.3 REGISTRATION ................................................................................4-6 Image Area ...........................................................................................4-6 D104/D016

iv

SM

Leading Edge ........................................................................................4-6 Side to Side ...........................................................................................4-6 Adjustment Standard.............................................................................4-6 Paper Registration Standard .................................................................4-7 Adjustment Procedure...........................................................................4-7 4.3.4 ERASE MARGIN ADJUSTMENT ......................................................4-8 4.3.5 COLOR REGISTRATION ..................................................................4-9 Line Position Adjustment.......................................................................4-9 4.3.6 PRINTER GAMMA CORRECTION .................................................4-10 Copy Mode ..........................................................................................4-10 Printer Mode .......................................................................................4-14 4.4 EXTERIOR COVERS ...............................................................................4-15 4.4.1 PCDU TONER COLLECTION BOTTLE ..........................................4-15 4.4.2 FRONT DOOR.................................................................................4-16 4.4.3 ITB CLEANING UNIT COVER .........................................................4-17 4.4.4 LEFT COVER ..................................................................................4-18 4.4.5 REAR COVER .................................................................................4-18 4.4.6 REAR LOWER COVER ...................................................................4-19 4.4.7 DUST FILTER..................................................................................4-19 4.4.8 RIGHT REAR COVER .....................................................................4-20 4.4.9 OPERATION PANEL .......................................................................4-20 4.4.10 TOUCH PANEL POSITION ADJUSTMENT ................................4-21 4.4.11 INNER RIGHT COVER................................................................4-22 4.4.12 INNER COVER ............................................................................4-22 4.4.13 FRONT RIGHT COVER ..............................................................4-23 4.4.14 RIGHT UPPER COVER ..............................................................4-23 4.4.15 LEFT FRAME AND LEFT FRAME REAR COVER ......................4-24 4.4.16 PAPER EXIT COVER ..................................................................4-24 4.4.17 INVERTER TRAY ........................................................................4-25 4.4.18 INNER TRAY ...............................................................................4-25 4.4.19 INNER REAR COVER .................................................................4-26 4.5 SCANNER UNIT .......................................................................................4-27 4.5.1 EXPOSURE GLASS ........................................................................4-27 4.5.2 ORIGINAL LENGTH SENSORS......................................................4-29 4.5.3 EXPOSURE LAMP ..........................................................................4-30 Reassembling .....................................................................................4-32 4.5.4 SCANNER MOTOR .........................................................................4-33 4.5.5 SENSOR BOARD UNIT (SBU) ........................................................4-34 SM

v

D104/D016

When reassembling ............................................................................4-34 4.5.6 EXPOSURE LAMP STABILIZER.....................................................4-35 4.5.7 SCANNER HP SENSOR .................................................................4-36 4.5.8 PLATEN COVER SENSOR .............................................................4-37 4.5.9 FRONT SCANNER WIRE ...............................................................4-37 Reinstalling the Front Scanner Wire....................................................4-39 4.5.10 REAR SCANNER WIRE ..............................................................4-42 Reinstalling the Rear Scanner Wire ....................................................4-42 4.6 LASER OPTICS ........................................................................................4-44 4.6.1 CAUTION DECAL LOCATION ........................................................4-44 4.6.2 LASER UNIT ...................................................................................4-44 Preparing a new laser unit ..................................................................4-44 Before removing the old laser unit.......................................................4-45 Recovery procedure for no replacement preparation of laser unit ......4-46 Removing the laser unit ......................................................................4-47 After installing a new laser unit ...........................................................4-48 4.6.3 POLYGON MIRROR MOTOR .........................................................4-50 4.7 IMAGE CREATION ...................................................................................4-51 4.7.1 PCDU (PHOTO CONDUCTOR AND DEVELOPMENT UNIT) ........4-51 When installing a new PCDU ..............................................................4-51 4.7.2 DRUM UNIT AND DEVELOPMENT UNIT .......................................4-52 New unit detection for the development unit .......................................4-54 4.7.3 TONER HOPPER UNIT ...................................................................4-55 Toner hopper unit: K, C, M ..................................................................4-55 Toner hopper unit: Y ...........................................................................4-56 When installing a new toner hopper unit .............................................4-57 4.7.4 TONER SUPPLY MOTOR ...............................................................4-58 4.7.5 TONER COLLECTION MOTOR ......................................................4-60 4.7.6 PCDU TONER COLLECTION BOTTLE FULL SENSOR ................4-63 4.7.7 PCDU TONER COLLECTION BOTTLE SET SWITCH ...................4-63 4.7.8 RFID BOARD...................................................................................4-63 4.8 IMAGE TRANSFER ..................................................................................4-65 4.8.1 ITB CLEANING UNIT ......................................................................4-65 When installing the ITB cleaning unit ..................................................4-65 4.8.2 ITB TONER COLLECTION BOTTLE FULL SENSOR .....................4-66 4.8.3 ITB (IMAGE TRANSFER BELT) UNIT.............................................4-66 4.8.4 ITB UNIT MOTOR ...........................................................................4-68 4.8.5 IMAGE TRANSFER BELT ...............................................................4-69 D104/D016

vi

SM

When reinstalling a new image transfer belt .......................................4-72 4.8.6 ITB CONTACT MOTOR ..................................................................4-73 4.8.7 ITB CONTACT SENSOR .................................................................4-75 4.9 PAPER TRANSFER .................................................................................4-76 4.9.1 PTR (PAPER TRANSFER ROLLER) UNIT .....................................4-76 4.9.2 PAPER TRANSFER UNIT FULL-OPEN ..........................................4-78 4.9.3 ID SENSOR BOARD .......................................................................4-78 Cleaning for ID sensors.......................................................................4-79 After installing a new ID sensor unit/board ..........................................4-80 4.9.4 PTR CONTACT MOTOR .................................................................4-80 4.9.5 PTR CONTACT SENSOR ...............................................................4-82 4.9.6 TEMPERATURE AND HUMIDITY SENSOR ...................................4-82 4.10 DRIVE UNIT ........................................................................................4-83 4.10.1 GEAR UNIT .................................................................................4-84 Adjustment after reinstalling the gear unit ...........................................4-85 4.10.2 REGISTRATION MOTOR ...........................................................4-86 4.10.3 PAPER FEED MOTOR: T1 .........................................................4-87 4.10.4 PAPER FEED MOTOR: T2 .........................................................4-88 4.10.5 DRUM MOTOR: CMY..................................................................4-88 4.10.6 DEVELOPMENT MOTOR: CMY .................................................4-89 4.10.7 DRUM/DEVELOPMENT MOTOR: K ...........................................4-89 4.10.8 DEVELOPMENT CLUTCH: K......................................................4-90 4.10.9 FUSING/PAPER EXIT MOTOR...................................................4-91 4.11 FUSING ..............................................................................................4-93 4.11.1 FUSING UNIT ..............................................................................4-93 When installing the fusing unit ............................................................4-94 4.11.2 ENTRANCE GUIDE PLATE ........................................................4-94 Cleaning Requirement ........................................................................4-94 4.11.3 STRIPPER PLATE ......................................................................4-95 Cleaning Requirement ........................................................................4-96 4.11.4 EXIT GUIDE PLATE CLEANING PROCEDURE .........................4-97 4.11.5 FUSING GEAR SHAFTS LUBRICATION PROCEDURE ............4-98 4.11.6 HEATING ROLLER FUSING LAMP ............................................4-99 4.11.7 HEATING ROLLER UNIT ..........................................................4-100 When reinstalling the heating roller unit ............................................4-102 4.11.8 PRESSURE ROLLER................................................................4-103 Cleaning Procedure ..........................................................................4-103 Replacement Procedure ...................................................................4-103 SM

vii

D104/D016

When reassembling the pressure roller .............................................4-105 4.11.9 HEATING ROLLER THERMOSTATS .......................................4-105 Side Heating Roller Thermostat ........................................................4-105 Lower Heating Roller Thermostats ....................................................4-106 4.11.10 HEATING ROLLER THERMISTOR .........................................4-106 Cleaning Requirement ......................................................................4-107 4.11.11 PRESSURE ROLLER THERMISTOR .....................................4-107 Pressure Roller Thermistor: Center...................................................4-107 Pressure Roller Thermistor: End .......................................................4-109 Cleaning Requirement ......................................................................4-109 4.11.12 THERMOPILE .........................................................................4-110 When cleaning the lens of the thermopile .........................................4-111 4.11.13 CLEANING UNIT (OPTION) INSTALLATION PROCEDURE ..4-112 4.12 PAPER FEED ...................................................................................4-114 4.12.1 PAPER TRAY ............................................................................4-114 4.12.2 FEED ROLLER ..........................................................................4-114 Tray 1 and Tray 2 ..............................................................................4-114 When reinstalling the feed roller ........................................................4-114 4.12.3 FRICTION PAD .........................................................................4-115 When reinstalling the friction pad ......................................................4-116 4.12.4 PAPER SIZE SWITCH ..............................................................4-116 4.12.5 PAPER END SENSOR ..............................................................4-117 Paper End Sensor: T1.......................................................................4-117 Paper End Sensor: T2.......................................................................4-117 4.12.6 REGISTRATION SENSOR........................................................4-118 Cleaning the registration roller ..........................................................4-119 4.12.7 VERTICAL TRANSPORT SENSOR ..........................................4-120 Vertical Transport Sensor 1 ..............................................................4-120 Vertical Transport Sensor 2 ..............................................................4-121 4.13 PAPER EXIT .....................................................................................4-123 4.13.1 JUNCTION GATE SOLENOID FAN ..........................................4-123 When installing the junction gate solenoid fan ..................................4-123 4.13.2 PAPER EXIT UNIT ....................................................................4-124 4.13.3 FUSING EXIT SENSOR ............................................................4-126 4.13.4 PAPER EXIT SENSOR .............................................................4-127 When installing the paper exit sensor ...............................................4-127 4.13.5 INVERTER SENSOR ................................................................4-128 4.13.6 INVERTER MOTOR ..................................................................4-129 D104/D016

viii

SM

4.13.7 FUSING FRONT FAN................................................................4-130 When installing the fusing front fan ...................................................4-130 4.14 DUPLEX UNIT ..................................................................................4-131 4.14.1 DUPLEX UNIT ...........................................................................4-131 4.14.2 DUPLEX ENTRANCE SENSOR ...............................................4-132 4.14.3 DUPLEX EXIT SENSOR ...........................................................4-134 4.14.4 DUPLEX ENTRANCE MOTOR .................................................4-135 4.14.5 DUPLEX EXIT MOTOR .............................................................4-136 4.14.6 BY-PASS MOTOR .....................................................................4-137 4.14.7 BY-PASS TRAY UNIT ...............................................................4-138 4.14.8 BY-PASS PAPER LENGTH SENSOR ......................................4-139 4.14.9 BY-PASS PAPER SIZE SENSOR .............................................4-140 When reinstalling the by-pass paper size sensor ..............................4-141 4.14.10 BY-PASS PAPER END SENSOR ...........................................4-142 Reinstalling the By-pass Paper End Sensor .....................................4-142 4.14.11 BY-PASS FEED ROLLER .......................................................4-142 4.14.12 BY-PASS TRAY HP SENSOR ................................................4-143 4.15 ELECTRICAL COMPONENTS .........................................................4-144 4.15.1 BOARDS ...................................................................................4-144 4.15.2 CONTROLLER BOX COVER ....................................................4-145 4.15.3 CONTROLLER BOX .................................................................4-146 Opening the controller box ................................................................4-146 4.15.4 BCU ...........................................................................................4-147 When installing the new BCU ............................................................4-147 4.15.5 HDD ...........................................................................................4-148 After installing a new HDD ................................................................4-148 Disposal of HDD Units ......................................................................4-149 4.15.6 IPU BOARD ...............................................................................4-149 4.15.7 CONTROLLER BOX FAN .........................................................4-150 When installing the controller box fan ...............................................4-150 4.15.8 FUSING REAR FAN ..................................................................4-151 When installing the fusing rear fan ....................................................4-152 4.15.9 DRB ...........................................................................................4-152 4.15.10 SDVDB ....................................................................................4-152 4.15.11 4.15.12 4.15.13 4.15.14 SM

PSU .........................................................................................4-153 HVPS: TTS BOARD ................................................................4-154 HVPS: CB BOARD ..................................................................4-154 CONTROLLER BOARD ..........................................................4-155 ix

D104/D016

When installing a new controller board .............................................4-156 HDD Encryption Recovery from a Device Problem ...........................4-157 Restoring the Encryption key ............................................................4-157 Clearing the NVRAM .........................................................................4-158 4.15.15 NVRAM REPLACEMENT PROCEDURE ................................4-159 NVRAM on the BCU..........................................................................4-159 NVRAM on the Controller ..................................................................4-160

SYSTEM MAINTENANCE 5. SYSTEM MAINTENANCE ............................................................ 5-1 5.1 SERVICE PROGRAM MODE .....................................................................5-1 5.1.1 SP TABLES .......................................................................................5-1 5.1.2 TYPES OF SP MODES .....................................................................5-1 SP Mode Button Summary....................................................................5-2 Switching Between SP Mode and Copy Mode for Test Printing ............5-3 Selecting the Program Number .............................................................5-3 Service Mode Lock/Unlock ....................................................................5-4 5.1.3 REMARKS .........................................................................................5-5 Display on the Control Panel Screen ....................................................5-5 Others ...................................................................................................5-6 5.2 MAIN SP TABLES-1 ...................................................................................5-7 5.2.1 SP1-XXX (FEED)...............................................................................5-7 5.3 MAIN SP TABLES-2 .................................................................................5-32 5.3.1 SP2-XXX (DRUM) ...........................................................................5-32 5.4 MAIN SP TABLES-3 .................................................................................5-63 5.4.1 SP3-XXX (PROCESS).....................................................................5-63 5.5 MAIN SP TABLES-4 ...............................................................................5-101 5.5.1 SP4-XXX (SCANNER)...................................................................5-101 5.6 MAIN SP TABLES-5 ...............................................................................5-114 5.6.1 SP5-XXX (MODE) .........................................................................5-114 5.7 MAIN SP TABLES-6 ...............................................................................5-174 5.7.1 SP6-XXX (PERIPHERALS) ...........................................................5-174 5.8 MAIN SP TABLES-7 ...............................................................................5-177 5.8.1 SP7-XXX (DATA LOG) ..................................................................5-177 5.9 MAIN SP TABLES-8 ...............................................................................5-209 5.9.1 INPUT AND OUTPUT CHECK TABLES .......................................5-209 Input Check Table .............................................................................5-209 Output Check Table ..........................................................................5-220 D104/D016

x

SM

5.10 MAIN SP TABLES-9 .........................................................................5-228 5.10.1 PRINTER SERVICE MODE ......................................................5-228 SP1-XXX (Service Mode) ..................................................................5-228 5.10.2 SCANNER SP MODE................................................................5-238 SP1-xxx (System and Others) ...........................................................5-238 SP2-XXX (Scanning-image quality) ..................................................5-239 5.11 FIRMWARE UPDATE .......................................................................5-240 5.11.1 TYPE OF FIRMWARE ...............................................................5-240 5.11.2 BEFORE YOU BEGIN ...............................................................5-242 5.11.3 UPDATING FIRMWARE............................................................5-243 Preparation .......................................................................................5-243 Updating Procedure ..........................................................................5-243 Error Messages .................................................................................5-245 Firmware Update Error......................................................................5-245 Recovery after Power Loss ...............................................................5-246 5.11.4 UPDATING THE LCDC FOR THE OPERATION PANEL ..........5-246 5.11.5 HANDLING FIRMWARE UPDATE ERRORS ............................5-247 Error Message Table.........................................................................5-247 5.11.6 JAVA VM UPDATING PROCEDURE ........................................5-249 5.11.7 APP2ME UPDATING PROCEDURE .........................................5-249 5.11.8 BROWER UNIT UPDATING PROCEDURE ..............................5-251 5.12 INSTALLING ANOTHER LANGUAGE ..............................................5-253 5.13 REBOOT/SYSTEM SETTING RESET ..............................................5-256 5.13.1 SOFTWARE RESET .................................................................5-256 5.13.2 SYSTEM SETTINGS AND COPY SETTING RESET ................5-256 System Setting Reset........................................................................5-256 Copier Setting Reset .........................................................................5-257 5.14 CONTROLLER SELF-DIAGNOSTICS ..............................................5-258 5.14.1 OVERVIEW ...............................................................................5-258 5.15 SD CARD APPLI MOVE ...................................................................5-259 5.15.1 OVERVIEW ...............................................................................5-259 5.15.2 MOVE EXEC .............................................................................5-260 5.15.3 UNDO EXEC .............................................................................5-261 5.16 DOWNLOADING STAMP DATA .......................................................5-262 5.17 NVRAM DATA UPLOAD/DOWNLOAD .............................................5-263 5.17.1 UPLOADING CONTENT OF NVRAM TO AN SD CARD ..........5-263 5.17.2 DOWNLOADING AN SD CARD TO NVRAM ............................5-264 5.18 ADDRESS BOOK UPLOAD/DOWNLOAD ........................................5-265 SM

xi

D104/D016

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL