3 302 418 en 10.09.2015 Operating manual Part 1 – Driving 3 302 418 en 10.09.2015
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
Important note
Any type of duplication or excerpt from thisdocument, even in electronic form, is not subject to the revision service of Manitowoc Crane Group Germany GmbH
The passing on or duplication of this document as well as the utilisation and disclosure of its contents is prohibited unless expressly permitted. Infringement will incur liability for compensation. All rights pertaining to registration of patent or utility model are reserved. The original language of this document is German.
10.09.2015 3 302 418 enOperating manual GMK5250L
© Copyright reserved by Manitowoc Crane Group Germany GmbH Industriegelände West D-26389 Wilhelmshaven, Germany Tel.: [+49] (0) 44 21 294-0 Fax: [+49] (0) 44 21 294-301
Telescoping emergency programme
Additional checks
When the Telescoping emergency programme is switched on the swingaway lattice is not automatically slewed. Telescoping is always enabled irrespective of the position of the swing-away lattice.
GThere is a risk of accidents due to the swing-away lattice falling. Before telescoping, always look on the emergency programme to ensure that the swing-away lattice is turned outwards. This way you will prevent telescoping parts from colliding with the swingaway lattice, brackets from coming off and the swing-away lattice from falling down.
• (A) – Before telescoping, use the emergency programme to check whether the swingaway lattice is turned outwards so that the telescoping parts (1) can move past the swing-away lattice.
• (B) – If the swing-away lattice is turned towards the main boom, you must turn the swing-away lattice outwards using emergency operation.
A description of how to slew using emergency operation is contained in the Lattice extension operating manual; à Lattice extension operating manual, ID number 3 302 450 or 3 302 451.
HIf the crane needs to be driven with the swing-away lattice folded down after telescoping in the emergency programme, you must turn the swing-away lattice towards the main boom using the emergency programme.
Additional page GMK 5250L3 302 483 en1 01.03.2016
Blank page
01.03.2016 23 302 483 en Additional page GMK 5250L
This operating manual is divided into two parts:
Part 1 – Driving
Part 2 – Crane operation
Content overview of part 1:
1Overview
2Basic safety instructions
3Operating elements for driving
4Starting/turning off the engine for driving
5Driving
6Driving modes and rigging for on-road driving
7Malfunctions in driving mode
8Index
You will find chapters9 to16 in part 2 – Crane operation.
Operating manual GMK5250L3 302 418 en 10.09.2015
Blank page
3 302 418 enOperating manual GMK5250L 10.09.2015
Operating manual GMK5250L3 302 418 en 10.09.2015 1 1Overview 1.1Accidents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -1 1.2Branch offices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -3 1.2.1Manitowoc Crane Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -3 1.2.2Dealer list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -3 1.3Warranty specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -3 1.4Terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -4 1.5Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -7 1.5.1Maximum lifting capacity (DIN/ISO/EN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -7 1.5.2Dimensions and weights of the truck crane, axle loads . . . . . . . . . . . . . . . . . . . 1 -8 1.5.3Dimensions and weights of removable parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -10 1.5.4Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -14 1.5.5Superstructure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -18 1.6Documentation supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -21 1.6.1Questions on documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -22 1.7Notes on the operating manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -23 1.7.1What do the symbols used mean? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -23 1.7.2How is the operating manual structured? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -25 1.7.3How do I find the information I need? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -27 1.7.4What information is available for operations planning? . . . . . . . . . . . . . . . . . . 1 -30 1.8Conversion table for US measuring units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -31 1.9Training – Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -33 1.10Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -34 1.11EC Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -36
3 302 418 enOperating manual GMK5250L 10.09.2015
Overview 1.1 Accidents
In the case of an accident, contact the relevant branch office of Manitowoc Crane Care in the country in which you are working and specify your crane type and serial number.
Adhere to the requirements regarding the obligation to report accidents prevalent in the country in which you are working and inform the supervisory authorities responsible for that particular type of accident (e.g. material damage, injuries to persons).
Overview 1.1 Accidents Operating manual GMK5250L3 302 418 en1 - 1 10.09.2015
1
Overview 1.1 Accidents 1 - 23 302 418 enOperating manual GMK5250L 10.09.2015
Blank page
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
1.2 Branch offices
1.2.1 Manitowoc Crane Care
If you need help or support with the operation on your truck crane, you can contact our branches at the following addresses Manitowoc Crane Care:
http://www.manitowoccranes.com
1.2.2 Dealer list
Visit the following address for a global list of dealers:
http://www.manitowoccranes.com
1.3 Warranty specifications
Please see the separately enclosed warranty certificate for information.
Overview 1.2 Branch offices Operating manual GMK5250L3 302 418 en1 - 3 10.09.2015
1.4 Terms used
Overview 1.4 Terms used 1 - 43 302 418 enOperating manual GMK5250L 10.09.2015
Overview 1.4 Terms used Operating manual GMK5250L3 302 418 en1 - 5 10.09.2015 (A) – Carrier 1 Cab 2 Boom rests 3 Counterweight platform 4 Axle lines 5 Outrigger beams 6 Supporting cylinders 7 Outrigger pads (B) – Superstructure 8 Slewing gear 9 Crane cab 10 Main boom with telescoping mechanism 11 Telescopic sections 12 Hook block 13 Derricking cylinder, derricking gear 14 Telescoping cylinder 15 Turntable 16 Main hoist 17 Counterweight 18 Auxiliary hoist1) 1) Additional equipment
Blank page
Overview 1.4 Terms used 1 - 63 302 418 enOperating manual GMK5250L 10.09.2015
1.5 Technical data
Permissible temperature range:–25°C to +40°C
Crane designation:Truck crane to ISO 4306, parts 1 and 2
Crane classification:Crane class A1 as per ISO 4301, part 2
The crane is designed in accordance with crane class A1 (as defined in ISO standard 4301 - 2). This relates to the engineering design (specification of quality) and is not a guarantee as per § 443 BGB (German Federal Law).
1.5.1 Maximum lifting capacity (DIN/ISO/EN)
Max. load bearing capacity: 180 t1)
250 t2) 0° to the rear
Max. load moment
–Within the 360° slewing range:698.5 tm (63.5 t x 11 m)
1) With additional equipment
2) With special equipment (no currently available)
Overview 1.5 Technical data Operating manual GMK5250L3 302 418 en1 - 7 10.09.2015
GROVE crane GMK5250L
1.5.2 Dimensions and weights of the truck crane, axle loads
All dimensions in the illustration are in mm.
Overview 1.5 Technical data 1 - 83 302 418 enOperating manual GMK5250L 10.09.2015
Dimensions All dimensions relate to on-road mode; à Driving modes, p.6-1.
Length without auxiliary hoist:15.29 m
A Height:
–385/95 R25
–445/95 R25
–525/80 R25
Max. level change
B Width:
–385/95 R25
–445/95 R25
–525/80 R25
Angle of negotiable banks:
Front:
Rear:
At on-road level: 3.94 m 3.99 m 3.99 m –130/+170 mm
2.97 m 2.97 m 3.07 m
At on-road level (385/95 R25) approx. 16° approx. 8°
Weight and axle loads
For equipment with the specified axle loads in on-road mode; à Driving modes, p.6-1.
Dimensions and weights of the parts which have to be transported on separate vehicles during on-road driving; à p.1-10.
Total weight:Depending on driving mode 60 t
Axle loads:depending on driving mode, 12 t
Overview 1.5 Technical data Operating manual GMK5250L3 302 418 en1 - 9 10.09.2015
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
