CAT Bucyrus CM345-N Continuous Miner Operation Manual BI016542 – PDF DOWNLOAD

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

This manual is intended to provide GENERAL product information for the CM345N Continuous Miner. The illustrations, descriptions and procedures contained in this publication apply only to THIS machine. Caterpillar reserves the right to revise models and designs without prior notice.

This Continuous Miner was manufactured under the guidelines, procedures and requirements of the Mines Regulations (Province of Saskatchewan), The Occupational Health and Safety Regulations (Province of Saskatchewan), CSA CAN3-M421-00 (Use of Electricity in Mines), Canadian Electrical Code (CEC) C22.1-06, The Canadian Electrical Code (Saskatchewan Amendments) Regulations 2002, and other applicable regulatory agency standards.

At the completion of the manufacturing process, this unit was issued the appropriate approval numbers and nameplates indicating it met the technical requirements of these regulatory agencies. Any change to the design or structure of this unit, without the consent of Caterpillar and these regulatory agencies, or any repair or replacement of parts contrary to Caterpillar’s instructions, may invalidate these approvals and render this unit unsafe to operate.

Strict compliance with all laws, regulations and practices regarding the safe operation and maintenance of underground mining equipment and strict adherence to the instructions in this manual is necessary for the personal safety of those working on or around this unit.

While this manual attempts to anticipate the most important operations and maintenance needs for this unit, unforeseen circumstances may arise that have not been addressed in this manual. If any concerns or questions arise, please contact your service representative immediately.

This work contains information protected under trade secret and other intellectual property laws, and is protected under the U. S. Copyright Act of 1976, as amended. This work is provided under license and the license is non-transferable. Distribution and access is limited only to authorized personnel. Disclosure, reproduction, distribution or unauthorized use may be a violation of federal and state laws and may subject the unauthorized user to criminal liability.

Table of contents

1. About this manual

2. Your safety

3. Storage and transport

5. Operation

6. Technical data

About this manual

This chapter provides important information making it easier for you to use this manual. It contains information on the structure of the manual and the symbols and characters used.

Before starting to work

Take care to ensure that the operating manual available to you is applicable for the type of equipment or machine used.

This operating manual is intended for:

CM345 N Continuous Miner Serial Numbers: 372035

372862

372864 451130

and is only permitted to be used for equipment of this type.

The operating manual must be accessible at all times to all persons working on or with the machine. It should, if possible, always be available at the place of operation.

Send for a new operation manual immediately if the present manual is no longer complete or has become illegible.

Who is this operating manual intended for?

This operating manual is intended for those persons who work with or on the machine. Every person working on the face or in the intersection between face and entry or in the entry must read this operating manual.

This includes persons who:

■operate the machine

■are in charge of transport

■perform assembly/disassembly work

■find/fix faults

■perform daily routine work at the face or in the entry

■perform maintenance work

■perform repair work

supervisory personnel who:

■initiate and/or supervise the activities just indicated.

service safety

What is the purpose of this operating manual?

This operating manual is intended to help you work efficiently and safely with our product. It contains important information on all the activities related to the machine.

Read this operating manual completely and at ease. Pay special attention to the safety instructions. Try to memorize the appearance and the meaning of the safety and instruction symbols.

If any details are not clearly understood, please contact our service department. Our service address is given in the chapter titled “For your information”.

Read the chapter “For your safety” with special attention. The chapter contains important information indicating possible hazards. Observe the information given and follow the procedural instructions.

Characters and symbols used

The following characters and symbols are used for safety instructions and important information in the operating manual.

Try to memorize the symbols and their meanings.

DANGER!

Points in the text marked with this symbol draw your attention to immediately impending danger. Possible consequences are: very serious injury or even death.

WARNING!

These points contain information on dangerous situations. Possible consequences are: very serious injury or even death.

CAUTION!

This symbol draws attention to dangerous situations. Possible consequences are: light to moderately serious injuries and machine damage.

NOTICE!

Points in the text marked with this symbol draw attention to harmful situations. Possible consequences are: damage to the machine or damage in the immediate vicinity.

IMPORTANT!

Points in the text marked with this symbol contain useful tips and information intended to facilitate work for you. They do not warn about harmful or dangerous situations.

alterations

Your safety

This chapter provides vital information for your safety. Pay special attention to this chapter. The safety instructions and rules of procedure will help you to avoid hazardous situations and to perform the necessary work as safely as possible.

This machine has been manufactured in accordance with state of the art and generally recognized safety standards and regulations. You and others can, nevertheless, be exposed to dangerous situations e.g. as a result of environmental influences, machine damage or operator errors.

Do not make any alterations or modifications which could impair the safe operation and maintainability of the machine. All modifications and changes must be approved and all appropriate regulatory agencies.

Use only original spare parts. Note that the use of parts from other manufacturers will void the warranty.

In addition to this operating manual be sure to also observe the respective legal provisions and regulations in your country.

Observe the safety and accident prevention regulations

■of the mine,

■of the mine’s inspectors, and

■of the mining supervisory authorities.

further operating manuals

Read the operating manuals of the components required for operation, e.g. of gearboxes, electric motors, etc., carefully and thoroughly. Clarify any questions before starting work.

training

Personnel Operation

The machine may only be operated by qualified, trained personnel. The machine is only allowed to be operated by qualified personnel who can provide proof of having been trained on this unit.

Reading of the operation manual, especially the chapter on safety, shall constitute a part of this training.

You must have adequate knowledge of the ■mechanics, ■hydraulics, and ■control engineering

and must be able to prove this knowledge.

Installation and repair

As a fundamental rule, installation and repair work may only be carried out by personnel who have been adequately trained for these particular requirements.

Installation and repair work on:

■safety components (pressure relief valves, extinguishers, etc.)

■the electrics (motors, controllers, etc.)

■the hydraulics (controls, cylinders, etc.) may only be carried out by service engineers or by specially qualified personnel of the mine.

Safety instructions

Operating conditions

Intended use

The Continuous Miner has been designed and manufactured for specific uses. Intended uses include:

■extraction of coal, phosphate, potash, salt, trona, and other medium hardness minerals

■loading the materials listed above onto a haulage system or shuttle car, or dumping it onto the ground for loading at a later time

■operation on grades of less than 18 degrees

Unauthorized use

Applications not expressly listed as intended uses are unauthorized uses and are not allowed to be performed with the machine.

■the transport of persons

■stone development or extraction

Caterpillar accepts no liability for any damage resulting from any such unauthorized use.

general

noise emissions

Safety instructions

Governing agencies

The following applicable standards and regulations, herein referred to as “governing regulations” shall be observed in conjunction with operating, performing maintenance, troubleshooting, etc. the continuous miner:

■The Mines Regulations (Province of Saskatchewan)

■The Occupational Health and Safety Regulations (Province of Saskatchewan)

■CSA CAN3-M421-00, Use of Electricity in Mines

■Canadian Electrical Code (CEC) C22.1-06

■The Canadian Electrical Code (Saskatchewan Amendments) Regulations, 2002

General rules

Always work with full concentration and familiarize yourself with your working environment.

Always wear your personal protective equipment. This also includes ear protectors as the noise emitted by other equipment in the area may at times exceed 85 db(A).

Inform your colleagues of

■your exact location, ■the work you are performing, and ■the time that you will probably require.

safety equipment

symbol plates

emergency stop

lock-out and tag

Start the machine only when it is in a good and safe operating condition and all protective devices, e.g. emergency stop devices, machine stop buttons, cover plates, etc. are correctly installed.

Observe the symbol plates on the machine.

Press the emergency stop button immediately in the event of fault or irregularities in operation. Report any irregularities to your superior so that necessary measures can be taken immediately.

Disconnect, lockout, and tag the power system, following all applicable rules and regulations, while performing maintenance, inspection, or repair work.

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.