Skyjack SJIII Series 3215 And 3219 MAINTENANCE & PARTS MANUAL 118941AK

SJIII Series

TM

MAINTENANCE & PARTS MANUAL

Printed in Canada

October 2018

The Compacts

118941AK

Models 3215 And 3219

For Service please call ..................................................................... 800 275-9522 Skyjack Inc. Service Center, 3451 Swenson Ave., St. Charles, IL. 60174 .... FAX 630 262-0006 For Parts in North America and Asia please call ..................................... 800 965-4626 Skyjack Inc. Parts Center, 3451 Swenson Ave., St. Charles, IL. 60174 .............. FAX 888 782-4825 For Parts & Service in Europe please call ................................................ 44-1691-676 236 Skyjack Europe Glovers Meadow, Maesbury Road, Oswestry, Shropshire .. FAX 44-169- 676 238

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

Before using or operating this work platform, check to see if it is equipped with any special options or has been modified in any way (refer to Table 2-5. for a list of Skyjack special options). Read all the applicable operating instructions and warnings. If this manual does not contain the required operating instructions for the special option(s), refer to Table 2-5. and order the appropriate sheet(s).

DO NOT OPERATE THIS EQUIPMENT WITHOUT PROPER AUTHORIZATION, TRAINING AND UNDERSTANDING OF THE OPERATION OF BOTH STANDARD AND OPTIONAL EQUIPMENT. DO NOT USE A WORK PLATFORM THAT HAS OPTIONS, ALTERATIONS OR MODIFICATIONS NOT APPROVED BY SKYJACK.

USE THE SERIAL NUMBER OF YOUR MACHINE TO DETERMINE THE CORRECT Operating Manual TO USE

MANUAL PART #

117129AH

118941AH

Release Date

August 2004

January 2006

3015

151981 & Below

Not Used

3215

Not Used

151982 & Above

3219

236285 & Below

236286 & Above

M O D E L S

60167AD

1

Table of Contents Section - Paragraph

Page No.

Section 1 - About Your Aerial Platform Aerial Platform Definition.................................................................................................................... 1 Purpose of Equipment ....................................................................................................................... 1 Use of Equipment .............................................................................................................................. 1 Manuals .............................................................................................................................................. 1 Operator ............................................................................................................................................. 1 Service Policy and Warranty .............................................................................................................. 1 Optional Accessories ......................................................................................................................... 1 Scope of this Manual ......................................................................................................................... 2 Operator Safety Reminders ............................................................................................................... 3 Electrocution Hazard ......................................................................................................................... 3 Safety Precautions ............................................................................................................................. 4

S E

2

C T

3

I

Section 2 - List of Tables Table of Contents ............................................................................................................................... 1 Section 3 - System Component Identification and Schematics - Operation Table of Contents ............................................................................................................................... 1 Section 4 - Troubleshooting Information - Operation Table of Contents ............................................................................................................................... 1

O

4

N

Section 5 - Maintenance and Service - Operation Table of Contents ............................................................................................................................... 1 Section 6 - Parts Lists - Operation Table of Contents ............................................................................................................................... 2

5 I N D E X

SJIII Series

SKYJACK, Page

6

The Safety Alert Symbol identifies important safety messages on aerial platforms, safety signs in manuals or elsewhere. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety message.

Th s Safety Alert Symbol means attent on!

Become alert! Your safety s nvolved.

DANGER DANGER nd cates an mm nently hazardous s tuat on wh ch, f not avo ded, w ll result n death or ser ous njury.

WARNING WARNING nd cates a potent ally hazardous s tuat on wh ch, f not avo ded, could result n death or ser ous njury.

CAUTION CAUTION nd cates a potent onally hazardous s tuat on wh ch, f not avo ded, may result n m nor or moderate njury. It may also be used to alert aga nst unsafe pract ces.

ImpORTANT IMPORTANT nd cates a procedure essent al for safe operat on and wh ch, f not followed, may result n a malfunct on or damage to the aer al platform.

SKYJACK, Page

SJIII Series

Section 1 - About Your Aerial Platform SKYJACK is continuously improving and expanding product features on its equipment, therefore, specifications and

dimensions are subject to change without notice.

Aerial Platform Definition A mobile device that has an adjustable position platform supported from ground level by a structure.

Purpose of Equipment The SKYJACK SJIII series aerial platforms are designed to transport and raise personnel, tools and materials to overhead work areas.

Use of Equipment The aerial platform is a highly maneuverable, mobile work station. Lifting and driving must be on a flat, level, compacted surface.

Manuals Operating The operating manual is considered a fundamental part of the aerial platform. It is a very important way to communicate necessary safety information to users and operators. A complete and legible copy of this manual must be kept in the provided weather-resistant storage compartment on the aerial platform at all times.

Maintenance & Parts The purpose of this is to provide the customer with the servicing and maintenance procedures essential for the promotion of proper machine operation for its intended purpose.

All information in this manual should be read and understood before any attempt is made to service the machine.

The updated copy of the manuals are found on the company’s website: www.skyjack.com.

Operator The operator must read and completely understand both this operating manual and the safety panel label located on the platform and all other warnings in this manual and on the aerial platform. Compare the labels on the aerial platform with the labels found within this manual. If any labels are damaged or missing, replace them immediately.

Service Policy and Warranty SKYJACK warrants each new SJIII Series work platform to be free of defective parts and workmanship for the first 12 months. Any defective part will be replaced or repaired by your local SKYJACK dealer at no charge for parts or labor. Contact the SKYJACK Service Department for warranty statement extensions or exclusions.

Optional Accessories The SKYJACK aerial platform is designed to accept a variety of optional accessories. These are listed under “Standard and Optional Features” in Table 2.1 of the Operating Manual.

Operating instructions for these options (if equipped) are located in Section 2 of the Operating Manual.

For options not listed under “Standard and Optional Features,” contact the SKYJACK Service Department at North America: ( : 800 275-9522 7 : 630 262-0006

Europe:

( : 44 1691-676-235 7 : 44 1691-676-239

Include the model and serial number for each applicable machine.

SJIII Series

SKYJACK, Page

1

Section 1 - About Your Aerial Platform Scope of this Manual a.

This manual applies to the ANSI/SIA, CSA and CE versions of the SJIII series aerial platform models listed on Table 2-1a and Table 2-1b.

- Equipment identified with “ANSI” meets the ANSI SIA-A92.6-1999 standard.

- Equipment identified with “CSA” meets the CSA B354.2-01 standard.

- Equipment identified with “CE” meets the requirements for the European countries, i.e., Machinery Directive 98/37/EC and EMC Directive 89/336/EEC and the corresponding EN standards. b.

CSA (Canada) and CE (Europe) Operators are required to conform to national, territorial/provincial and local health and safety regulations applicable to the operation of this aerial platform.

c.

ANSI/SIA (United States) Operators are required by the current ANSI/SIA A92.6 standards to read and understand their responsibilities in the manual of responsibilities before they use or operate this aerial platform.

SKYJACK, Page

SJIII Series

Section 1 - About Your Aerial Platform

warning Failure to comply with your required responsibilities in the use and operation of the aerial platform could result in death or serious injury!

Operator Safety Reminders A study conducted by St. Paul Travelers showed that most accidents are caused by the failure of the operator to follow simple and fundamental safety rules and precautions.

You, as a careful operator, are the best insurance against an accident. Therefore, proper usage of this aerial platform is mandatory. The following pages of this manual should be read and understood completely before operating the aerial platform.

Common sense dictates the use of protective clothing when working on or near machinery. Use appropriate safety devices to protect your eyes, ears, hands, feet and body.

Any modifications from the original design are strictly forbidden without written permission from SKYJACK.

Electrocution Hazard This aerial platform is not electrically insulated. Maintain a Minimum Safe Approach Distance (MSAD) from energized power lines and parts as listed below. The operator must allow for the platform to sway, rock or sag.

This aerial platform does not provide protection from contact with or proximity to an electrically charged conductor.

DO NOT USE THE AERIAL PLATFORM AS A GROUND FOR WELDING. DO NOT OPERATE THE AERIAL PLATFORM DURING LIGHTNING OR STORMS.

DANGER Avoid Power Lines Minimum Safe Approach Distance ANSI/SIA A92.6-1999 & CSA B354.2-01 Requirements Voltage Range Minimum Safe Approach Distance (Phase to Phase) Feet Meters 0 to 300V Avoid Contact Over 300V to 50KV 10 3.05 Over 50KV to 200KV 15 4.60 Over 200KV to 350KV 20 6.10 Over 350KV to 500KV 25 7.62 Over 500KV to 750KV 35 10.67 Over 750KV to 1000KV 45 13.72

CE Guidance Note “Avoidance of danger from Overhead Lines”

Adhere strictly to the governmental rulings and regulations applicable in your country.

FAILURE TO AVOID THIS HAZARD WILL RESULT IN DEATH OR SERIOUS INJURY! 60023AC

SJIII Series

SKYJACK, Page

Section 1 - About Your Aerial Platform

Safety Precautions Know and understand the safety precautions before going on to next section. warning Failure to heed the following safety precautions could result in tip over, falling, crushing, or other hazards leading to death or serious injury.

• KnOw all national, state or territorial/provincial and local rules which apply to your aerial platform and jobsite.

• TUrn the (emergency) main power disconnect switch off when leaving the aerial platform unattended. Remove the key to prevent unauthorized use of the aerial platform.

• aVOiD entanglement ropes, cords or hoses.

with

• aVOiD falling. Stay within the boundaries of the guardrails.

• DO nOT raise the aerial platform in windy or gusty conditions.

SKYJACK, Page

� �

�

• DO nOT wear loose clothing, dangling neckties, scarves, rings, wristwatches or other jewelry while operating this lift.

��

• wEar all the protective clothing and personal safety devices issued to you or called for by job conditions.

• DO nOT increase the lateral surface area of the platform.

Increasing the area exposed to the wind will decrease aerial platform stability.

• DO nOT drive or elevate the aerial platform if it is not on a firm level surface. Do not drive elevated near depressions or holes of any type, loading docks, debris, drop-offs and surfaces that may affect the stability of the aerial platform.

• if operation in areas with holes or drop-offs is absolutely necessary, elevated driving shall not be allowed. Position the aerial platform horizontally only with the platform fully lowered. After ensuring that all 4 wheels or outriggers (if equipped) have contact with level firm surface, the aerial platform can be elevated. After elevation, the drive function must not be activated.

• Elevated driving must only be done on a firm level surface.

• DO nOT ascend or descend a grade when elevated. When fully lowered, ascending or descending, only grades up to rated maximum listed in Table 2-1 are permissible.

SJIII Series

Section 1 - About Your Aerial Platform

Safety Precautions (Continued) Know and understand the safety precautions before going on to next section.

• DO nOT operate on surfaces not capable of holding the weight of the aerial platform including the rated load, e.g. covers, drains, and trenches.

• DO nOT operate an aerial platform that has ladders, scaffolding or other devices mounted on it to increase its size or work height. It is prohibited.

• DO nOT raise the aerial platform while the aerial platform is on a truck, fork lift or other device or vehicle.

• BE awarE of crushing hazards. Keep all body parts inside platform guardrail.

• DO nOT exert side forces on aerial platform while elevated.

• DO nOT lower the platform unless the area below is clear of personnel and obstructions.

• DO nOT use the aerial platform as a crane. It is prohibited.

• EnSUrE that there are no personnel or obstructions in the path of travel, including blind spots.

• DO nOT sit, stand or climb on the guardrails. It is prohibited.

• BE awarE of blind spots when operating the aerial platform.

• DO nOT climb on scissor arm assembly. It is prohibited.

• STUnT driving and horseplay are prohibited.

• EnSUrE aLL tires are in good condition and lug nuts are properly tightened.

• BE awarE of overhead obstructions or other possible hazards around the aerial platform when driving or lifting.

SJIII Series

• DO nOT alter or disable limit switches or other safety devices.

• DO nOT use the aerial platform without guardrails, locking pins and the entry gate in place.

SKYJACK, Page

Section 1 - About Your Aerial Platform

Safety Precautions (Continued) Know and understand the safety precautions before going on to next section.

• DO nOT exceed the rated capacity of the aerial platform. Do make sure the load is evenly distributed on the platform.

• DO nOT attempt to free a snagged platform with lower controls until personnel are removed from the platform.

• DO nOT position the aerial platform against another object to steady the platform.

warning An operator should not use any aerial platform that: • • • •

• DO nOT place materials on the guardrails or materials that exceed the confines of the guardrails unless approved by Skyjack. warning Entering and exiting the aerial platform should only be done using the three points of contact.

• Use only equipped access openings.

• Enter and exit only when the aerial platform is in the fully retracted position.

•

does not appear to be working properly. has been damaged or appears to have worn or missing parts. has alterations or modifications not approved by the manufacturer. has safety devices which have been altered or disabled. has been tagged or blocked out for non-use or repair.

Failure to avoid these hazards could result in death or serious injury.

Jobsite Inspection • Do not use in hazardous locations.

• Perform a thorough jobsite inspection prior to operating the aerial platform, to identify potential hazards in your work area.

• Be aware of moving equipment in the area. Take appropriate actions to avoid collision.

• Do use three points of contact to enter and exit the platform. Enter and exit the platform from the ground only. Face the aerial platform when entering or exiting the platform.

• Three points of contact means that two hands and one foot or one hand and two feet are in contact with the aerial platform or the ground at all times during entering and exiting.

SKYJACK, Page

SJIII Series

Section 2

List of Tables Table of Contents Table 2.1a Specifications and Features - ANSI/CSA ..................................................................................................2 Table 2.1b Specifications and Features - AS ..............................................................................................................4 Table 2.1c Specifications and Features - CE ..............................................................................................................6 Table 2.2

Owner’s Annual Inspection Record ..........................................................................................................8

Table 2.3a Maximum Platform Capacities (Evenly Distributed) - ANSI/CSA..............................................................9 Table 2.3b Maximum Platform Capacities (Evenly Distributed) - AS .......................................................................10 Table 2.3c Maximum Platform Capacities (Evenly Distributed) - CE .......................................................................11 Table 2.4a Floor Loading Pressure - ANSI/CSA .......................................................................................................12 Table 2.4b Floor Loading Pressure - AS ...................................................................................................................14 Table 2.4c Floor Loading Pressure - CE ...................................................................................................................16 Table 2-5a

General Maintenance and Inspection Schedule - ANSI/CSA..............................................................18

Table 2-5b

General Maintenance and Inspection Schedule - AS .........................................................................19

Table 2-5c

General Maintenance and Inspection Schedule - CE .........................................................................20

Table 2-6a

Operator’s Checklist - ANSI/CSA .........................................................................................................21

Table 2-6b

Operator’s Checklist - AS.....................................................................................................................22

Table 2-6c

Operator’s Checklist - CE.....................................................................................................................23

SJIII Series

SKYJACK, Page

2

Section 2 - List of Tables

Table 2.1a Specifications and Features - ANSI/CSA MODEL Weight *

3215

3219

3220

3226

2400 lb.

2580 lb.

3510 lb.

4135 lb.

1089 kg

1170 kg

1592 kg

1876 kg

32"

32"

0.81 m

0.81 m

70.0”

91.5"

1.78 m

2.32 m

26” x 64”

28” x 84”

0.66 m x 1.63 m

0.71 m x 2.13 m

Width Length Platform Size

Height Stowed Platform Height Platform Elevated Height Working Height Stowed Height Railings Up

34.5”

39"

38"

45"

0.88 m

0.99 m

0.97 m

1.14 m

15'

19’

20’

26’

4.6 m

5.8 m

6.1 m

7.9 m

21’

25’

26’

32’

6.4 m

7.6 m

7.92 m

9.75 m

74”

78.5"

77.5"

84.7"

1.88 m

1.99 m

1.97 m

2.15 m

FULL

Drive Height (All Standards)

Standard Operating Time Lift Time (No Load)

18 sec.

20 sec.

27 sec.

43 sec.

Lower Time (No Load)

32 sec.

39 sec.

41 sec.

52 sec.

Lift Time (Rated Load)

23 sec.

25 sec.

33 sec.

56 sec.

Lower Time (Rated Load)

24 sec.

29 sec.

29 sec.

42 sec.

Chassis High Travel Speed Elevated Drive Speed

2 mph

2.4 mph

3.2 km/h

3.9 km/h

0.65 mph

0.64 mph

0.66 mph

1.05 km/h

1 km/h

1.1 km/h

1.2 mph

1.3 mph

1.9 km/h

2.09 km/h

High Torque Drive Speed

N/A

Gradeability

23%

25%

12 x 4 x 8

16 x 5 x 12

Tires (Solid Rubber)

60156AI-ANSI-1

* Weight with standard 3' (0.9 m) or 4' (1.2 m) extension platform.

Refer to nameplate for aerial platforms with 5' (1.5 m) or 6' (1.8 m) extension platform.

SKYJACK, Page

SJIII Series

Section 2 - List of Tables

Table 2.1a Specifications and Features - ANSI/CSA (Continued) MODEL Weight *

4620

4626

4632

6826

6832

4100 lb.

4700 lb.

5075 lb.

5380 lb.

5680 lb.

1860 kg

2132 kg

2302 kg

2440 kg

Width Length Platform Size

2576 kg

46"

68"

1.17 m

1.73 m

91"

99.5"

2.31 m

2.52 m

42" x 84"

57" x 84"

1.07 m x 2.13 m

1.45 m x 2.13 m

Height Working Platform Elevated

26'

32'

38'

32'

38'

7.92 m

9.75 m

11.6 m

9.75 m

11.6 m

20'

26'

32'

26'

32'

6.1 m

7.9 m

9.8 m

7.9 m

9.8 m

77.25"

84.5"

88"

93.6"

99"

1.96 m

2.15 m

2.24 m

2.38 m

2.51 m

38"

45"

48.5"

50"

55.5"

0.97 m

1.14 m

1.23 m

1.27 m

1.40 m

20'

26'

32'

26'

32'

6.1 m

7.9 m

9.8 m

7.9 m

9.7 m

Lift Time (No Load)

24 sec.

48 sec.

50 sec.

N/A

58 sec.

Lower Time (No Load)

48 sec.

45 sec.

62 sec.

N/A

63 sec.

Lift Time (Rated Load)

32 sec.

54 sec.

59 sec.

65 sec.

60 sec.

Lower Time (Rated Load)

32 sec.

32 sec.

49 sec.

57 sec.

51 sec.

Fixed Railing Platform Lowered Drive Height

Standard Operating Time

Chassis 2 mph

High Travel Speed Elevated Drive Speed

3.2 km/h 0.56 mph

0.46 mph

0.90 km/h

0.74 km/h

1 mph

High Torque Drive Speed

1.6 km/h 25%

Gradeability Tires

16 x 5 x 12

23 x 10.5 x 12

Solid Rubber

Foam Filled1 60156AI-ANSI-2

* 1

Weight with standard 3' (0.9 m) or 4' (1.2 m) extension platform.

Refer to nameplate for machines with 5' (1.5 m) or 6' (1.8 m) extension platform.

Fill hardness: 55 Durometer

SJIII Series

SKYJACK, Page

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL