Liebherr Crawler Crane Process data recording (PDE)Operator’s Manual – PDF DOWNLOAD

Operator's manual

Process data recording (PDE)

en

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

Product ID Commercial name: Type:

PDE PDE CM

Document ID ORIGINAL OPERATOR'S MANUAL Author: Version: Issued:

LWN / Technical Documentation Department V03.01 20170519_134154

Manufacturer Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Straße 1 6710 Nenzing Austria +43 50809 41-0 info.lwn@liebherr.com

copyright © Liebherr-Werk Nenzing GmbH 2017

2

PDE CM / V03.01

Foreword

The name Liebherr doesn't just stand for products and services. It has become a byword for ideas and innovations. For progress which has proved its worth in the marketplace.

We constantly strive to extend and improve our diverse range of products and services. This requires ongoing cooperation and sharing of experience with our customers and business partners throughout the world. We are therefore grateful for any ideas and suggestions for improvements.

Inform Liebherr customer service if the machine is sold or bought by a previous owner.

copyright © Liebherr-Werk Nenzing GmbH 2017

PDE CM / V03.01

3

Foreword

Operator's manual

copyright © Liebherr-Werk Nenzing GmbH 2017

4

PDE CM / V03.01

Notes regarding the documentation

Components of the documentation The PDE is an optional accessory equipment of the machine. This operating manual supplements the operation manual of the machine and is only valid in conjunction with the operating manual of the machine.

Operating manual Information about the safe operation of the PDE.

Current document status The supplied documentation has been exclusively compiled for the PDE. When managing and visualizing the recorded logs, reference is made to the optional PDR software.

To ensure that the documentation is completely up-to-date at all times: – Do not remove individual documents.

– Request missing and/or illegible pages from Liebherr's customer service.

– Immediately file new documents that have been provided for conversion work.

– Replace changed documentation and destroy the current version.

– If the documentation is available in several languages, make sure that all language versions are updated.

Storing the documentation The operating manual must always be kept ready at hand in the cabin.

Structure of the operation manual The operation manual consists of individual, consecutively numbered chapters.

The table of contents provides information about the structure of the individual chapters.

The sequences of the actions described in the sections must be observed at all times.

Display conventions Numerical values and units This machine was designed and built according to the metric system of units.

Numerical values in the imperial system of units are converted and rounded.

copyright © Liebherr-Werk Nenzing GmbH 2017

PDE CM / V03.01

5

Notes regarding the documentation

Operator's manual

Symbols Symbol *

Meaning Optional additional equipment Requirement must be met

Performing an action

Consequence of an action Symbols

Symbols in illustrations Symbol

Meaning

Actions

Imperative sequence of multiple actions in an illustration Random sequence of multiple actions in an illustration

Consequences of actions

Consequences of actions with imperative sequence Consequences of actions with random sequence

Exact enlargement of an area

copyright © Liebherr-Werk Nenzing GmbH 2017

6

PDE CM / V03.01

Operator's manual

Notes regarding the documentation

Symbol

Meaning

Enlargement of an area or a component in the same perspective as in the illustration

Enlargement of an area or a component in a different perspective as in the illustration

Symbols in illustrations

Labeling of the warning notices

Name

Description

1

Warning signs

Warns of possible injuries

2

Signal word

For further information see: Signal words

3

Danger source

Explanation of danger (contexts)

4

Measures

Measures to prevent the danger

5

Consequences of the danger

Consequences in case of non-observance and possibly additional information required for comprehension

Labeling of the warning notices

Signal words DANGER Denotes an immediate dangerous situation which will result in death or serious injury if it is not avoided. u Refers to action to reduce or avoid the danger(s).

copyright © Liebherr-Werk Nenzing GmbH 2017

PDE CM / V03.01

7

Notes regarding the documentation

Operator's manual

WARNING Denotes a dangerous situation which could result in death or serious injury if it is not avoided. u Refers to action to reduce or avoid the danger(s).

CAUTION Denotes a dangerous situation which could result in minor or moderate injury if it is not avoided. u Refers to action to reduce or avoid the danger(s).

NOTICE Denotes a dangerous situation which could result in material damage if it is not avoided. u Refers to action to reduce or avoid the danger(s).

Further designations Note Denotes useful tips and hints. u Refers to the current action and demonstrates how to perform actions in an easier way.

Publisher's imprint Version In the interest of our customers, we reserve the right to make changes in line with technical developments. This documentation therefore corresponds to the technical situation at the time of delivery of the machine, and not to the current state of development at the manufacturer.

Copyright notice Litronic is a registered trademark of Liebherr.

The documentation is protected by copyright. Copying and reproducing the load charts in connection with work planning and operation of the machine is expressively permitted. Other than that, the documentation may not be duplicated, reproduced, microfilmed, translated or converted for storage and processing in computer systems, either wholly or partially, without the written consent of Liebherr. © Copyright by Liebherr All rights reserved.

copyright © Liebherr-Werk Nenzing GmbH 2017

8

PDE CM / V03.01

Technical terms and abbreviations

List of abbreviations Abbreviation

Technical term

PDE

Prozessdatenerfassung

PDR

Process data report

LIPOS

Liebherr-Positionierungs-System

SEP

Spezifischer-Energie-Wert

List of abbreviations

copyright © Liebherr-Werk Nenzing GmbH 2017

PDE CM / V03.01

9

Technical terms and abbreviations

Operator's manual

copyright © Liebherr-Werk Nenzing GmbH 2017

10

PDE CM / V03.01

Contents

1

Product description

17

1.1

Explanation of PDE/PDR terms

17

1.1.1

PDE

17

1.1.2

PDR

17

1.2

Modes matrix

18

1.3

PDE in cabin

19

1.3.1

PDE monitor

20

1.3.2

Memory cards

20

1.4

Data on memory card CF2

21

1.4.1

File organization

21

1.4.2

head.pdex

21

1.4.3

head.txt

21

1.4.4

data.txt

21

1.4.5

report00.txt

21

1.4.6

page00.bmp

21

1.5

Recorded data

23

1.6

Log types

24

2

Safety instructions

27

3

Control and operating elements

31

3.1

PDE monitor

32

3.1.1

Status bar

32

3.1.2

Display section

34

3.1.3

Submenu bar

39

3.1.4

Menu bar

41

3.2

Start screen

43

3.3

Operation screen

44

3.3.1

44

3.4

Input fields

Notes screen

46

copyright © Liebherr-Werk Nenzing GmbH 2017

PDE CM / V03.01

11

Contents

Operator's manual

3.5

Settings screen

47

3.5.1

48

Screen Settings - PDE settings

3.6

Screen PDE visualization continuous flight auger drilling

51

3.7

Screen PDE visualization double rotary drilling

53

3.8

PDE visualization soil mixing screen

55

3.9

PDE visualization screen vibrator

58

3.9.1

58

PDE visualization

3.10 PDE visualization hammer screen

61

3.10.1 Visualization Depth/number of impacts setting

61

3.10.2 Visualization Number of impacts/depth setting

63

3.11 PDE visualization Kelly drilling screen

66

3.12 PDE visualization Hydraulic grab screen

67

3.12.1 Measuring run 3.13 PDE visualization dynamic soil compaction screen

69

3.14 PDE visualization Full displacement drilling

71

3.14.1 Toggling the PDE visualization view

71

3.14.2 PDE visualization screen Full displacement drilling with SEP* and RPM display*

71

3.14.3 PDE visualization Full displacement drilling with drilling progress and RPM display*

74

3.14.4 PDE visualization Full displacement drilling with drilling progress

76

3.15 PDE visualization screen cycle counter

4

68

79

3.15.1 Configuration

79

3.15.2 PDE visualization

81

3.16 Error messages screen

83

Operation

87

4.1

Operating the PDE

87

4.1.1

Setting the sub-mode*

87

4.1.2

Entering data on the operation screen

88

4.1.3

Entering data on the notes screen

90

4.1.4

Entering data on the settings - PDE settings screen

91

4.1.5

Setting the depth trigger point

92

4.1.6

Setting the time trigger point

93

4.1.7

Setting automatic input

94

4.1.8

Setting log generation

95

copyright © Liebherr-Werk Nenzing GmbH 2017

12

PDE CM / V03.01

Operator's manual

Contents

4.1.9

4.2

4.3

4.4

4.5

4.6

4.7

4.8

4.9

Setting print job for the log

95

4.1.10 Setting the log type

96

4.1.11 Switching SI units

96

4.1.12 Select view of PDE visualization

97

4.1.13 Switching to Litronic testing system

100

Preparing the recording

101

4.2.1

Setting the exchangeable equipment to zero position

101

4.2.2

Hiding relative movement of the exchangeable equipment

102

Continuous flight auger drilling

105

4.3.1

105

Visualizing process data

Double rotary drilling

106

4.4.1

106

Visualizing process data

Soil mixing

107

4.5.1

107

Visualizing process data

Vibrator

108

4.6.1

Visualizing process data

108

4.6.2

Visualizing process data in the time diagram

109

4.6.3

Visualizing process data in the time diagram

110

4.6.4

Switching between time diagram and depth/time diagram

110

Hammer

111

4.7.1

Entering mode-dependent data

111

4.7.2

Depth/number of impacts setting

111

4.7.3

Visualizing process data in the Depth/number of impacts setting

114

4.7.4

Number of impacts/depth setting

115

4.7.5

Visualizing process data in the Number of impacts/depth setting

118

Kelly drilling

120

4.8.1

120

Visualizing process data

Hydraulic grab

121

4.9.1

121

Visualizing process data

4.10 Dynamic soil compaction 4.10.1 Visualizing process data 4.11 Full displacement drilling 4.11.1 Full displacement drilling with SEP* 4.12 Cycle counter

122 122 123 123 127

4.12.1 Configuring cycle counter

127

copyright © Liebherr-Werk Nenzing GmbH 2017

PDE CM / V03.01

13

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL