JLG 100HX 110HX 100HX+10 Illustrated Parts Manual 3120801 – PDF DOWNLOAD

Illustrated Parts Manual

Models 100HX 110HX 100HX+10 3120801 July 29, 2011

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

REVISION LOG January 1991 - Original Issue Of Manual February 1997 - Revised (New Format) September 1997 - Change 1 October 29, 1999 - Revised (Manual edited to 0010375 Revision 41) March 1, 2000 - Revised (Manual edited to 0010375 Revision 41) October 1, 2000 - Revised (Manual edited to 0010375 Revision 42) February 12, 2004 - Revised January 2, 2008 - Revised July 29, 2011 - Revised

3120801

A

REVISION LOG

B

3120801

TABLE OF CONTENTS FIGURE NO. TITLE PAGE NO. SECTION 1 - FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8

STEERING AND AXLE/WHEEL DRIVE INSTALLATIONS . . . . . . . . . . . . . . . . . . . . . . . .1-2 DRIVE HUB ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6 DRIVE BRAKE ASSEMBLY - AUSCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10 DRIVE BRAKE ASSEMBLY - MICO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12 DRIVE MOTOR ASSEMBLY - VICKERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16 DRIVE MOTOR ASSEMBLY - SAUER-DANFOSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-20 VALVES AND SWITCHES INSTALLATIONS (FRAME MOUNTED). . . . . . . . . . . . . . . . .1-22 TOW PACKAGE INSTALLATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-26

SECTION 2 - TURNTABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27

TURNTABLE, BOOM AND CUTOUT SWITCH INSTALLATIONS (4620044 TURNTABLE MACHINES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 TURNTABLE, BOOM AND CUTOUT SWITCH INSTALLATIONS (4620078 TURNTABLE MACHINES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 CONTROL VALVES AND TILT INDICATOR INSTALLATIONS . . . . . . . . . . . . . . . . . . . .2-10 CONTROL VALVES ASSEMBLY (VICKERS) (PRIOR TO OCTOBER 1994) . . . . . . . . . .2-14 CONTROL VALVES ASSEMBLY (VICKERS) (OCTOBER 1994 TO PRESENT) . . . . . . .2-18 CONTROL VALVE ASSEMBLY - BANG-BANG WITH DUMP SECTION (PRIOR TO JUNE 1995) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22 CONTROL VALVE ASSEMBLY - BANG-BANG WITH DUMP SECTION (JUNE 1995 TO PRESENT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26 ACCESSORY VALVE ASSEMBLY (MILLER) (MACHINES BUILT THROUGH 1989) . . .2-30 ACCESSORY VALVE ASSEMBLY (MACHINES BUILT 1990 TO PRESENT) . . . . . . . . .2-32 CONTROL VALVE ASSEMBLY - 1 SECTION BANG-BANG (100HX+10/110HXER MACHINES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-34 SWING DRIVE, BEARING AND LOCK INSTALLATIONS. . . . . . . . . . . . . . . . . . . . . . . . .2-36 SWING MOTOR ASSEMBLY - NICHOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-38 SWING BRAKE ASSEMBLY (PRIOR TO APRIL 1992). . . . . . . . . . . . . . . . . . . . . . . . . . .2-40 SWING BRAKE ASSEMBLY (APRIL 1992 to PRESENT). . . . . . . . . . . . . . . . . . . . . . . . .2-44 SWING HUB ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-48 ROTARY COUPLING AND COLLECTOR RING ASSEMBLY AND INSTALLATION . . . .2-50 DEUTZ ENGINE INSTALLATION WITHOUT NOISE REDUCTION (BUILT PRIOR TO OCTOBER 1992) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54 DEUTZ ENGINE INSTALLATION WITH NOISE REDUCTION (BUILT OCTOBER 1992 TO PRESENT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-60 ADECO THROTTLE COMPONENTS INSTALLATION - DEUTZ ENGINE MACHINES . .2-68 GENERATOR INSTALLATIONS - DEUTZ ENGINE MACHINES . . . . . . . . . . . . . . . . . . .2-70 PUMP COUPLING INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-72 MAIN PUMP ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-74 TANKS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-76 GROUND CONTROLS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-80 LOAD MANAGEMENT INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-86 HOODS AND ALARM INSTALLATION (MACHINES WITH 4620044 TURNTABLE) . . . .2-88 HOODS AND ALARM INSTALLATION (MACHINES WITH 4620078 TURNTABLE) . . . .2-92

SECTION 3 - BOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1 3-1 3-1 3-2

3120801

BOOM ASSEMBLY COMPONENTS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 BOOM ASSEMBLY COMPONENTS INSTALLATION (SHEET 2 OF 2). . . . . . . . . . . . . .3-3 CHAIN ADJUSTER ASSEMBLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14

i

TABLE OF CONTENTS

FIGURE NO. 3-3 3-4 3-5 3-6 3-7

TITLE

PAGE NO.

EXTEND-A-REACH INSTALLATIONS (PRIOR TO MAY 1992) (100HX+10 & 110HXER ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 EXTEND-A-REACH INSTALLATIONS (MAY 1992 TO PRESENT) (100HX+10 & 110HXER ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 BOOM LENGTH INDICATOR AND LIMIT SWITCHES INSTALLATION . . . . . . . . . . . . . 3-24 BROKEN CHAIN LIMIT SWITCH INSTALLATION (GERMAN/AUSTRIAN SPECS BUILT PRIOR TO S/N 28224) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 BOOM WIPERS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30

SECTION 4 - PLATFORMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8

PLATFORM COMPONENTS INSTALLATION - 100HX/110HX . . . . . . . . . . . . . . . . . . . . 4-2 PLATFORM COMPONENTS INSTALLATION - 100HX+10/110HXER (PRIOR TO MAY 1992) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 PLATFORM COMPONENTS INSTALLATION - 100HX+10/110HXER (MAY 1992 TO PRESENT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 ROTATOR MOTOR ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 CONSOLE BOX ASSEMBLY (PRIOR TO SEPTEMBER 1991) . . . . . . . . . . . . . . . . . . . . 4-16 CONSOLE BOX ASSEMBLY (SEPTEMBER 1991 TO PRESENT) . . . . . . . . . . . . . . . . . 4-20 CONTROLLER ASSEMBLIES - OEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 OPTIONAL COMMON PLATFORM MOUNTED COMPONENTS . . . . . . . . . . . . . . . . . . 4-28

SECTION 5 - CYLINDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8 5-9 5-10 5-11 5-12 5-13 5-14

AXLE EXTENSION CYLINDER ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 AXLE LIFT CYLINDER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 LEVEL CYLINDER ASSEMBLY (100HX & 110HX BUILT PRIOR TO MAY 1992) . . . . . . 5-6 LEVEL CYLINDER ASSEMBLY (100HX & 110HX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 LEVEL CYLINDER ASSEMBLY (100HX+10 & 110HXER BUILT PRIOR TO MAY 1992) 5-10 LEVEL CYLINDER ASSEMBLY (100HX+10 & 110HXER) . . . . . . . . . . . . . . . . . . . . . . . 5-12 LIFT CYLINDER ASSEMBLY - BOOM (PRIOR TO MAY 1992) . . . . . . . . . . . . . . . . . . . . 5-14 LIFT CYLINDER ASSEMBLY - BOOM (MAY 1992 TO PRESENT) . . . . . . . . . . . . . . . . . 5-16 LIFT CYLINDER ASSEMBLY - BOOM (GERMAN TUV STYLE). . . . . . . . . . . . . . . . . . . . 5-18 LIFT CYLINDER ASSEMBLY - EXTEND-A-REACH (100HX+10 & 110HXER ONLY) . . . 5-20 MASTER CYLINDER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22 STEER CYLINDER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24 TELESCOPE CYLINDER ASSEMBLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26 CYLINDER BELLOWS INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30

SECTION 6 - HYDRAULICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 6-1 6-2 6-3 6-4 6-5 6-6 6-7 6-8 6-9 6-10 6-11

ii

HYDRAULIC DIAGRAM LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 HYDRAULIC DIAGRAM - AXLE EXTENSION & STEER (WITHOUT TOW PACKAGE & WITH DUAL FRAME JACKS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 HYDRAULIC DIAGRAM - BRAKE WITH PRESSURE REDUCING VALVE (USED WITH AUSCO DRIVE BRAKES). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 HYDRAULIC DIAGRAM - DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 HYDRAULIC DIAGRAM - EXTEND-A-REACH (100HX+10 AND 110HXER) . . . . . . . . . . 6-12 HYDRAULIC DIAGRAM - LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14 HYDRAULIC DIAGRAM - LIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16 HYDRAULIC DIAGRAM - PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18 HYDRAULIC DIAGRAM - ROTATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22 HYDRAULIC DIAGRAM - SEQUENCE LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24 HYDRAULIC DIAGRAM - SWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26

3120801

TABLE OF CONTENTS FIGURE NO. 6-12

TITLE

PAGE NO.

HYDRAULIC DIAGRAM - TELESCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-28

SECTION 7 - ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1 7-1 7-2 7-3

ELECTRICAL DIAGRAM LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2 WIRING SCHEMATIC - PLATFORM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8 WIRING SCHEMATIC - STANDARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10

SECTION 8 - DECALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1 8-1 8-2

DECALS INSTALLATION - BROWN DECALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2 DECALS INSTALLATION - BLACK DECALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-8

SECTION 9 - RECOMMENDED SERVICE PARTS STOCK . . . . . . . . . . . . . . . . . . . . . . . . .9-1 SECTION 10 - SPECIAL OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1

3120801

iii

TABLE OF CONTENTS

FIGURE NO.

iv

TITLE

PAGE NO.

3120801

SECTION 1 FRAME

S E C T I O N

TABLE OF CONTENTS FIGURE

1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8

3120801

DESCRIPTION

STEERING AND AXLE/WHEEL INSTALLATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 DRIVE HUB ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 BRAKE ASSEMBLY - AUSCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 BRAKE ASSEMBLY - MICO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 DRIVE MOTOR ASSEMBLY - VICKERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16 DRIVE MOTOR ASSEMBLY - SAUER-DANFOSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20 VALVES AND SWITCHES INSTALLATIONS (FRAME MOUNTED) . . . . . . . . . . . . . . . . . . . . . . 1-21 TOW PACKAGE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28

1 F R A M E

1-1

S E C T I O N

SECTION 1 FRAME FIGURE 1-1. STEERING AND AXLE/WHEEL DRIVE INSTALLATIONS

1 F R A M E

1-2

3120801

SECTION 1 FRAME FIGURE 1-1. STEERING AND AXLE/WHEEL DRIVE INSTALLATIONS FIG & ITEM #

PART NUMBER

1281982 0239122

STEERING INSTALLATION Standard Standard (Machines with Tow Bar Package) (S/N 47309 to Present)

Ref. Ref.

F 5

Ref.

1

1681934

2 2A 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

4843050 3420620 3421553 4740314 3960243 3300007 0630078 2780159 1120347 0721003 4761000 4740347 3323803 3324203 0440190 0440191 3451012 3421524 3312602 4740111 2160002 0642644 0560605 3323002 0641507 4761500 3532561 4130206 4130370 0960821 3421330 3422635 See Note

33

3120801

REV.

Ref.

1

30 31 32

QTY.

FRAME WELDMENT

0259555

28A 29

DESCRIPTION

2360280

3420158 4712600 4130205 0960821 0100011

Steer Cylinder Assembly (See Section 5 for Breakdown) Tie-Rod Assembly Pin, Quick Release Kingpin Washer, Thrust Seal, Hub Nut, Wheel Stud, Wheel Hub Assembly (Includes Item 7) Cap, Hub Bolt #10-24NC x 3/8” Lockwasher #10 Washer, Hardened Nut, Slotted 1 3/4”-12NF Nut, Slotted 2"-12NF Cup, Bearing Cone, Bearing Pin, Cotter 5/16” x 3" Pin, Steer Cylinder Nut, Jam 1"- 8NC Washer, Thrust Fitting, Grease Bolt 1"-8NCx 5 1/2” Block Nut, Jam 1 1/4” - 12 NF Bolt 5/16”-18NC x 7/8” Lockwasher 5/16” Plate, Retainer Spindle (Left Side) Options: Standard Standard (Machines With Tow Bar Package) Bushing, Bronze Pin, Clevis (Prior to S/N 33256) Pin, Clevis (S/N 33256 to Present) 3421330 Pin (Prior to S/N 33256) (Note Recommend using 3422635 in place of original 3421330) Hairpin Flatwasher 1" Spindle (Right Side) Bushing, Bronze Loctite #242 (Not Shown)

S E C T I O N 1

1 1 1 2 2 2 24 24 2 2 8 8 2 2 2 4 4 4 1 2 5 3 2 2 2 2 2 1 1

F R A M E

2 1 1

1 1 1 2 A/R

1-3

S E C T I O N

SECTION 1 FRAME FIGURE 1-1. STEERING AND AXLE/WHEEL DRIVE INSTALLATIONS (CONTINUED) FIG & ITEM #

PART NUMBER

34 35 36 37

3760170 1260017 2160001 2160003

Ring, Quick Release Chain Fitting, Grease - 90° Fitting, Grease - 45°

0239089

AXLES INSTALLATION

1 F R A M E

1-4

101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121

4843031 4843030 3972218 3312202 0361632 4070576 4070577 0642008 4712000 3311505 4300032 4761400 4843032 3760106 1260017 3421546 3421565 3760170 3340527 0560674 0560673

122

1681964

123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142

3760140 3421549 0560675 0641406 4751400 0100011 0361631 4070574 4070575 3421548 3532592 0641403 3532590 3532591 3300151 4843028 4843023 0641505 4761500 4070670

DESCRIPTION

Inner Axle Weldment (Front Right Side) Inner Axle Weldment (Front Left Side) Setscrew 3/4”-10NC x 2 1/4” Nut, Jam 3/4”-10NC Bar Shim 1/32” Shim 1/16” Bolt 5/8”-11NC x 1" Flatwasher 5/8” Locknut 5/16”-18NC Stud (Welded on Part) Lockwasher 1/4” Bushing Weldment D-Ring Chain #3 Pin, Axle Lock Snap-Pin Ring, Quick Release Wear Pad Block, Axle Shim Block, Axle Shim Axle Extension Cylinder Assembly Options (See Section 5 for Breakdown) Ring, Retaining Pin, Attaching (Front Axle Cylinder) Block, Axle Shim Bolt 1/4”-20NC x 3/4” Flatwasher 1/4” Loctite #242 (Not Shown) Bar, Wear Shim 1/16” Shim 1/32” Pin, Attaching (Rear Axle Cylinder) Plate, Cover Bolt 1/4”-20NC x 5/8” Plate, Cover Plate, Cover Nut, Acorn Inner Axle Weldment (Rear Right Side) Inner Axle Weldment (Rear Left Side) Bolt 5/16”-18NC x 5/8” Lockwasher 5/16” Shim 1/8”

QTY.

REV.

2 8in/20cm 2 1 Ref.

9

1 1 16 16 2 2 2 8 8 12 4 8 4 4 64in/1.6m 4 4 4 4 8 2 2 8 2 2 8 12 A/R 2 2 2 2 1 4 2 2 4 1 1 16 16 A/R

3120801

SECTION 1 FRAME FIGURE 1-1. STEERING AND AXLE/WHEEL DRIVE INSTALLATIONS (CONTINUED) FIG & ITEM #

PART NUMBER

143 144

4070672 4070674 0239152

201 202

2780155 0920072 0920084 0920110 0920119

203 Use 1001096405 1001096405 204 205 206 207 208 209 210

4300092 4751800 4761800 3311801 0642216 4762200 3300007

DESCRIPTION Shim 1/32” Shim 1/16” WHEEL DRIVE INSTALLATION Hub Assembly (See Figure 1-2 for Breakdown) Brake Assembly Options: Prior to March 1992 (See Figure 1-3 for Breakdown) March 1992 to S/N 33476 (See Figure 1-4 for Breakdown) S/N 33476 to Present (See Figure 1-4 for Breakdown) Optional Replacement (Note: Can be used as suitable replacement. Requires P/N 4300097 5-1/8” long Stud) (was p/n 0920117) Note: Repair Kit p/n 7018612 & Mounting Face Gasket p/n 7000731 are only Service Parts available for Brake p/ns 0920119 & 0920117.

Motor Assembly Options: Original Equipment (was p/n 3160132 - See Figure 1-5 for Breakdown) Service Replacement Kit (See Figure 1-6 for Breakdown) Stud 1/2”-13NC x 5 1/2” Flatwasher 1/2” Lockwasher 1/2” Nut 1/2”-13NC Bolt 3/4”-10NC x 2" Lockwasher 3/4” Narrow Lugnut 3/4”-16NF TIRE AND WHEEL INSTALLATIONS Note: Assemblies may require ballast/foam filling to manufacturer’s specifications prior to installing on a machine. Refer to Operation & Safety or Service & Maintenance Manuals. Purchase individual tire and/ or rim only if able to foam fill tire & wheel assembly, otherwise, purchase complete assembly.

301

0239344 0253929 0259456 0259442

3120801

Tire and Wheel Assembly - 15 x 22.5 Foam-Filled (Prior to April 1993) Tire and Wheel Assembly - 385/65R22.5 Foam-Filled (April 1993 to S/N 44997) Tire and Wheel Assembly - 385/65R22.5 Foam-Filled L.H. (S/N 44997 to Present) Tire and Wheel Assembly - 385/65R22.5 Foam-Filled R.H. (S/N 44997 to Present)

QTY.

REV.

A/R A/R Ref.

3/B

2 2

S E C T I O N 1 F R A M E

2

4 4 4 4 24 24 24 Ref.

A/R A/R 2 2

1-5

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL