Technical Manual
© Bucyrus All Rights Reserved
R
BI615893
BUCYRUS
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
BI615893
GDC1 HP ROTARY BLASTHOLE DRILL OPERATOR MANUAL
This manual contains instructions regarding operation and routine care of the Gardner-Denver GDClHP Rotary Blasthole Drill, It is intended to help you understand rig functions, operations, and maintenance. Read and understand this manual before operating or servicing the rig. Keep it handy for reference later. The many variations in equipment for specific drilling programs are not covered in this instruction book. General hole starting procedure is given because this information is basic to most conditions regardless of how the drill is equipped, The "DOWN-HOLE" technical problems encountered in drilling are not covered in this manual. The solutions to these problems are usually learned by careful observation and on-the-job experience, To obtain maximum service life and trouble-free operation, it is important to follow the lubrication and maintenance recommendations.
The information, specifications, and illustrations in this manual are based on the information in effect at the time this manual was printed. Continuing improvement and advancement of product design may cause changes in your machine which may not be included in this manual. Each manual is reviewed and revised, as required, to update and include these changes in later editions. Because of the various options offered in the GDC lHP Rotary Blasthole drill, the operator may find variations in some of the controls with regard to location and/or additional controls for optional components.
NEW OPERATOR MUST READ OPERATOR MANUAL
BI615893
BI615893 1HP ROTARY BLASTHOLE DRILL OPERATOR MANUAL SPECIFICATIONS & FEATURES WARNINGS & PRECAUTIONS CONTROLS Table of Contents Section 1 Section 2 Section 3 Operator Area ................. 1-4 External Controls 5-8 OPERATING INSTRUCTIONS Section 4 Cold Weather Starting ................................................ 1 Engine Pre-start ......................................................................................................................... 1 Notes For Cold Weather Use: .................... 1 Engine Starting 2-3 Tramming .................................................. :............................................................................4-5 Level Machine 6-7 Raise Mast 8-9 Lower Mast ..........................................................................................................................10-11 Hammerdrill 12-13 Collar Hole With Hammerdrill 14-15 Drilling with A Hammerdrlll .................................................................................................16-17 Breakout Bit From Hammerdrill 18-19 Prepare To Drill With Rollerblt .............................................................................................20-21 Collar Hole With Roller Bit 22·23 Drilling With Roller Bit .........................................................................................................24-25 Clearing Plugged Roller Bit .................................................................................................26-27 Retract Drill Bit 28-29 Break Joint With Deck Wrench 30-31 Break Joint With Deck Wrench ...........................................................................................32-33 Break Joint With Breakout Wrench 34-35 Break Joint With Breakout Wrench 36-37 Unload Pipe From Pipe Rack Into Hole (optional) ..............................................................38·39 Unload Pipe From Pipe Rack Into Hole 40-41 Load Pipe From Hole Into Pipe Rack (optional) .: ................................................................42-43 Load Pipe From Hole Into Pipe Rack 44-45
BI615893 LUBRICATION SERVICE SCHEDULE TROUBLESHOOTING INITIAL HYDRAULIC START-UP Section 5 Section 6 Section 7 Purpose ..................................................................................................................................... 1 Start-up Equipment ...........................................................................................................•.......• 1 General Procedure 1 ROUTINE CARE Section 8 FIiters 1 Alternator Belt Adjustment 2 Compressor Oil Filter Service .................................................................................................... 3 Engine & Compressor Air Filters ............................................................................................... 4 PERIODIC MAINTENANCE Section 9
BI615893
BI615893
BI615893
BI615893
BI615893
BI615893
BI615893
BI615893
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
