Operators Manual
BI620141
QXR 920 10233
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
BI620141
1218 Redonda St., Box 13, Grp 524, RR5
Winnipeg, Manitoba Canada, R2C 2Z2
Phone: (204) 694-5505
Main Fax: (204) 633-0665
www.cubex.net
Copyright
Cubex Ltd.
BI620141
© 2008 Printed in Canda
BI620141
I TABLE OF CONTENTS Section 1 Introduction..........................................................1 1.1 Drill Description................................................................................1 1.2 Manual Objectives.............................................................................1 1.3 Drill Orientation...............................................................................2 Section 2 Description of Equipment.........................................3 2.1 Major Components and Sub-assemblies....................................................3 2.2 Electrical Controls............................................................................26 2.3 Manual Hydraulic Controls..................................................................31 2.4 Display Screens................................................................................35 Section 3 Start-Up and Tramming...........................................55 3.1 Operating Procedures for Start-Up........................................................55 3.2 Start-Up........................................................................................58 3.3 Tramming......................................................................................60 3.4 Set Up..........................................................................................63 Section 4 Drilling...............................................................69 4.1 Drilling Procedures...........................................................................69 4.2 Delivery Systems..............................................................................83 4.3 Drilling..........................................................................................85 Section 5 Maintenance........................................................91 5.1 Daily Maintenance Procedures..............................................................91 5.2 Lubrication....................................................................................94 5.3 Safety Procedures............................................................................98 Section 6 Troubleshooting...................................................109 6.1 Troubleshooting the Tram Drive.........................................................109 6.2 Troubleshooting the Hydraulic System..................................................110 6.3 Troubleshooting the Water Injection Pump............................................112 6.4 Troubleshooting the Air Driven Oil Injection Pump...................................113 6.5 Troubleshooting the Air Driven Grease Injection......................................113 BI620141
6.6 Troubleshooting the Air Delivery System...............................................114 6.7 Troubleshooting the Hammer.............................................................116 6.8 Troubleshooting the Drill Bit..............................................................117 6.9 Troubleshooting Depth Laser.............................................................119 Cubex Terra DGS Operation Manual........................................121 Section 1 Introduction.......................................................125 1.1 Features......................................................................................125 Section 2 Software Removal and Installation.............................126 2.1 Removal / Installation Procedure:.......................................................126 2.2 Sensor Installation..........................................................................133 Section 3 Operation...........................................................143 3.1 ZERO-OFFSET Calibration Procedure....................................................150 3.2 Local and Absolute Heading Measurements............................................153 II BI620141
Section 1 Introduction
1.1 Drill Description
The Cubex Megamatic QXR series of drills are designed to deliver maximum drilling efficiency and flexibility using a Down-the-hole Hammer. The standard QXR is a QXR 920 with a 900 cfm/500 psi (25.7m3/min 34.5 bar) compressor, a mast with carousel capable of handling 20 ft. (6 m) drill pipe and a Caterpillar engine. The QXR series of drills also offers up to 1350 cfm/500 psi (38.6 m3/34.5 bar) air capacity.
The QXR is designed to drill up to 8” (203 mm) diameter holes to a depth of 140 feet (42.7 m) without adding drill pipe to the carousel.
1.2 Manual Objectives
This manual covers a description and the operation of the Cubex QXR drill and can be used as a training aid for Cubex’s Operator Training Course.
The Objective of this manual is to familiarize operators with the following:
• Major components and sub-assemblies of drill
• Layout of controls and what they operate
• Drilling
• Maintenance
• Operator Safety
• Troubleshooting
1
BI620141
1.3 Drill Orientation
The operator's right hand side is the drill's right hand side with the operator standing at the tram step facing forward (Fig 1.1).
2
BI620141
Fig 1.1 Orientation
• Thank you very much for reading the preview of the manual.
• You can download the complete manual from: www.heydownloads.com by clicking the link below
• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
CLICK HERE TO DOWNLOAD THE COMPLETE MANUAL
