CAT Bucyrus SCH5000 Hydra-Trac Self Contained Hydraulic Track Drill Operator Manual PN 1421434 - PDF

Technical Manual

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

General Information

The Reedrill SCH5000 series Hydra-Trac and HPR2-Cl drill make an ideal drilling package for a wide range of mining and construction applications. The SCH5000 Hydra-Trac is easy to operate, maneuverable, and efficient. A fully self-contained drill carrier, the Hydra-Trac consists of the following main components:

1. D-4 type track assemblies with 15 inch triple-bar grousers.

2. Prime mover - Caterpillar model C-10 ATAAC electronic diesel engine rated at 310 B.H.P.@ 2100 RPM. The C-10 replaces the 3306 DITA turbo charged after-cooled diesel engine, rated at 285 B.H.P. @1800 RPM. The C-10 is more efficient and meets more stringent E.P.A. regulations.

3. Hydraulic system, consisting of three (3) hydraulic pumps driven by the prime mover thru an elastic coupling to the pump drive gearbox.

4. Drill/right-hand tram pump - Rexroth Al 1VLO (late models), Vickers PVD 45 (early models)

Compressor/left-hand tram pump - Rexroth Al 1VLO (late models), Vickers PVD 45 (early models)

Drill rotation pump - Vickers PVE-19

5. 350 C.F.M. compressor driven by a piston hydraulic motor, optional 400 C.F.M available.

6. A 12' chain feed (20' Model SCH5000CL) powered by a hydraulic piston motor, complete with a hydraulic powered, scissors type centralizer, an automatic linear rod changer, rack, and hose reel system.

7. Model HPR2-Cl hydraulic percussion drill complete with nitrogen charge kit.

The SCH5000C / SCH5000CL operator cab is sound suppressive pressurized, with air conditioning. ~ITBncloses controlumsoles for tramming, drilling, and positioning, and is mounted on tneleft s1d'~e-of the carrier. The SCH5000 (non-cab machine) is equipped with a drill console mounted on a hydraulically movable arm for safety and comfortable operation.

Machines equipped with optional dust collector incorporate an additional pump dedicated for operation of the dust collector fan.

The heavy duty 3' extendable telescoping boom is installed on all SCH5000 / 5000C model machines. The boom has large wear pads and all externally mounted cylinders, which combine for long component life and easy access for service areas. The combination of the telescoping boom and the 12' feed system provide accurate and fast set-up for all drilling functions. A massive non-extendable boom is provided on SCH5000CL machines. This boom system combines with a 20' feed system that can satisfy all high production demands.

The heavy duty construction and low center of gravity make this self contained carrier a highly stable drilling platform.

Overlapping track pads and track frame with ± 8% oscillation provide positive ground contact when tramming over rough terrain.

The HPR2-Cl Hydra-Drill is a high performance h draulic rock drill that roduces 3 1 2 inch (8.9 cm) and larger holes in medium to hard rock.

SCH5000 Model machines are equipped with an automatic engine throttle system which provides

ull.engine.power-only-aLdrilling.operation-for-energy_saving.and-economic-operation,~-------

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.