Koehring Hydraulic Excavator 6644 Parts Manual Pdf

KOE 6644 hydraulic excavator

Serial No. _ _ __

I~I ...,

~

Litho In USA

KOEHRING CRANES &

. EXCAVATORS

12261-119

USING THIS PARTS BOOK This Parts Manual has been designed for optimum ease of reading and is the key to Customer-Distributor-Factory communication.

Genuine replacement parts along with interchangeable product improvements as they become available will keep your machine in a reliable and productive condition.

The following instructions describe the features of the manual and how to use it effectively.

Use this manual also as a supplement to the Operator's Manual and Maintenance Manual when performing service procedures on the machine.

IMP 0

R TAN T

This manual lists serviceable parts for EVERY machine built of this model designation. Serial numbers are used to identify parts when a product improvement is made or an alternate component is used. KNOW THE SERIAL NUMBER OF YOUR MACHINE before searching for replacement parts.

The PARTS GROUP INDEX shows the functional arrangement of associated parts for the machine. A group number identifies the same group of parts regardless of model (Group [][] is always the hydraulic system). The groups which apply to the machine are listed in numerical order. A letter suffix to a group number I 25A I is used for variable or optional parts groups.

PAGE NUMBERS are in numerical sequence within each parts group. The first number is the group number and the second number is the numerical sequence number. Letter suffixes are used to maintain continuity to the manual as revisions are incorporated (1.1, 1.2, 1.2A, 1.2B, 1.3, etc.).

A NUMERICAL PARTS LIST at the front of the manual shows all part numbers in numerical sequence keyed to the pages where they can be found. Also, a part number can be cross referenced to verify whether the part is a valid serviceable part or if there is a current replacement part.

EXPLODED VIEW ILLUSTRATIONS show the relationship of assembled parts. The illustrations are keyed to an accompanying parts list on the same page or on the facing page and are positioned for ease in reading the manual.

-

INSTRUCTIONS FOR ORDERING PARTS -

When ordering parts, contact your nearest Koehring Crane and Excavator Group distributor and give the following information to assure prompt service:

o

MACHINE IDENTIFICATION:

o

I~IKOEHRING ......

CRANES &

State the model and serial number.... located on a metal plate in the Operator's Cab.

-

EXCAVATORS 11111.1." NO.

MODIL NO.

o

'--__..JIIL---__-" 0

PART IDENTIFICATION: State the part number, description and quantity required. Do not use the item number. Avoid using the words "Pairs" or "Sets."

REF.

PART NO.

707 6594

DESCRIPTION

QTY.

Gear . . . . . . . • • . . . . . 1

SHIPPING INSTRUCTIONS: State the invoicing address. Unless otherwise specified, invoices will be mailed to the shipping point.

INVOICE TO:

State the correct shipping address and the means of shipment ... parcel post, air mail, air freight, UPS, bus, etc.

Mid State Equipment Milwaukee, WI

SHIP TO:

Ace Construction Co. Madison, WI

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

-

LOCATING INDIVIDUAL PARTS -

1.

Turn to the PARTS GROUP INDEX and find the general area of the part in question (Example: Seat would be found in "Operator's Cab & Machine Housings" Group 27).

2.

Refer to the parts group and check to see if a subsequent letter-<iesignated group is used.

Check the title block on the pages to determine the application of the group to your particular machine.

ENGINE ASSEMBLY Detroit Diesel

14

ENGINE ASSEMBLY Cummins Diesel

14A

3.

Major assemblies are shown at the beginning of each group with page references to component parts breakdowns on the pages which follow. Briefly skim through the group to familiarize yourself with the information included in it. Locate the illustration and parts list which pertain to the assembly or part you desire. Compare the serial number of your machine to those which may appear on the page to be sure you are ordering the correct part.

4.

Item numbers on the illustration correspond to those in the parts list. Parts not shown with an item number are the same as identical or symmetrical parts with an item number.

Parts keyed with an asterisk (*) or other symbol (**, -,0,0,) are included in a repair kit.

If no part number is shown, these parts cannot be ordered separately.

5.

Quantities are shown as required per component or assembly unless otherwise noted.

6.

If an assembly is listed without any serviceable parts, it must be ordered complete.

Serviceable parts of components are listed under the component part or on a subsequent page as indicated.

7.

All hardware shown without the size listed after the noun name is specially made for the particular application and must not be substituted with standard hardware.

PARTS GROUPS

DESCRIPTION

GROUP NO.

a m

Crawler & Carbody ....................

Turntable, Fuel Tank ..................

II! . ............................. .II Engine

Counterweight .......................

Power Take.Off ......................

m

Em Pump Drive Case ..................... Ell Hydraulic System ..................... Em

Swing System ........................

Air System ..........................

m

II Operator's Controls, Piping & Linkage ... Em Guards, Rails, Steps, Mirrors, Catwalks .. Em Nameplates Decals ................. Em Operator's Cab & Machinery Housing ....

&

Heating & Air Conditioning .............

m

Em H9rn, Wiper, Floodlights, Accessories ... EIl Tools, Paint, Powerluber & Accessories .. Em Electrical System .....................

Hoe Attachment ...................... logger Attachment ...................

m m

NOTE. Block numbers correspond to group block numbers on parts pages.

PRIOR SERIAL #21106

QUANTITIES LISTED ARE FOR BOTH CRAWLER ASSEMBLIES. RIGHT HAND CRAWLER FRAME PARTS ILLUSTRATED.

PART NO.

REF. I

2 3 4 5 6 7 8 9

10

"J~(1\j

11U"\ KOEHRING ~ CRANES&

EXCAVATORS

----_._----

OGIH

Page 1.2 Page 1.2 Page 1.2 Page 1.7 Page 1.8 Page 1.9 {U359E9030 U359E9031 r 310V3375 1. 332V2600 310v4145 LU334v3401 310V3362 340V3331

..r -[

OESCR I PTI ON Idler Tumbler Assembly ......

Spring, Recoi I ..............

Cyl inder, Adjusting .....•...

Roller, Lower ...............

Roller, Carr ier ............• Track Assembly .........•....

Frame, RH Crawler (Shown) ...

Frame, LH Crawler ...........

Capscrew, 3/4c x 4 Gr 5 .....

Lockwasher, 3/4 .............

Capscrew, Gr 8 ..............

Washer, Hardened .......•....

Capscrew, 3/4c x 5-1/2 Gr 5.

Locknut, 3/4c Gr 5 ..........

_Q:r~..:.

2 2 2 18 6 2 I I

72 72 24 24 12 12

'!:"'. PI\P.TS, SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED CRAWLER ASSEMBLY PAGE 1.1

,

ITEM 8 INSPECT SEAL WHENEVER GREASE " VALVE HAS BEEN LOOSENED. REPLACE IF NECESSARY. ,. "

I'

liTEM 7 TORQUE GREASE VALVE TO 100 FT. t ..

LBS. DRY, UNCOATED

...

". ...

!

';

~

'~

"

COMPLETE IDLER GROUPS ARE INTERCHANGEABLE. " BEFORE ORDERING INTERNAL PARTS CHECK IDLER WHEEL OR SLIDE BLOCKS FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW.

REF

2 3 4 4A

PART NO. Petti·West ITm or ITs)

0901V3488

090lV3495

(U35908995·1)

(U35908995-2) (l00mm Cyl.)

(U35908ge5-3) (125mm Cyl.)

U422V0080

U901V3490

U901V3490

901V2094 901V3079 901V2096

901V2004 901V2006 901V2008

901V1395 901V1459 901V1408

U901V3487

U901V3246

U901V3491 901V3858 901V1411

901V1395 901V1459 901V1408 901V1406 29089 U901V3491 901V3858 901V1411 901V4102

U901V2792

U901V3492

U422V0098

901V2798 901V2799 901V2783 901V2784 310V3239

901V1294 901V1277 901V1297 901V2795

901V1278 901V1277 901V1276 901V3754

316V3145 340V3127

316V3145 340V3127

-[ 901V4101

6

U901V2234

11

PART NO. Intertrack (I) Begin Ser. 121035 U901V3489

U422VOl37

58

7 8 9 10

PART NO. intertrack (I) PrlorSer. 121035

{

5 5A

PART NO. Berco

901V2235 901V2111 901V2110 901V2108 {310V3239

DESCRIPTION

Idler & Recoil Group .......................... 1 (Incl. Items 1 thru 10)

Wheel w/Slide Bars ........................... 1 (Incl. Items 2,3 & 4) Bushing ............................................. 2 Seal Group ........................................ 2 O·Ring ............................................... 2 Shaft .................................................. 1 Pin, Roll ............................................. 1 Spring Group ..................................... 1 Bolt ....................................................4 Lockwasher ....................................... 4 Yoke .................................................. 1 Adjusting Cylinder Group .................. 1 (Incl. Items 7,8,9 & 10) Valve, grease .................................... 1 Seal ................................................... 1 Seal ................................................... 1 Seal, Wiper ....................................... 1 Capscrew, M16 x 65 Gr 8 ................. 8 Capscrew. S/8C x 4 Gr 8 ................... 8 Nut, S/8C Gr 8 ................................... 8

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

i 0 LER ® DISCONTINUED

TUM

BLERA S S EM B LY

PARTI REFER TO NUMERICAL PARTS LIST FOR REPLACEMENT PARTIS)

QTY.

3

ITEMS 3,9,11,15 & 19 COAT THREADS WITH LOCTITE No. 242, SCREWLOCK. ITEM 5 COAT MATING SURFACES LIGHTLY WITH OIL. KEEP OUTSIDE SURFACE OF SEALS AB· SOLUTELY FREE OF OIL OR GREASE. ITEM 12 TORQUE CAPSCREWS (15) to 25 IN. LBS. MEASURE GAP BETWEEN BEARING CARRIER (7) AND RETAINER CAP (13). INSTALL SHIMS EQUAL TO GAP. TORQUE CAPSCREWS TO 160 FT. LBS.

9 QUANTITIES FOR BOTH TRACTION DRIVES LISTED. RIGHT HAND DRIVE PARTS ILLUSTRATED.

15 REF.

PART NO.

2 3

U335F1527 Spec.Ord. 334V3002 310V3721

4 5 6 7 8 9

359A7413 461V1518 361A3381 361C3375 334V2664 316v3315

10 11

361A3377 316V3335

1"1

DESCRIPTION Case Ass'y Track Drive ..

(For Parts, See Pg. 1.4) Washer, Hardened ......

Capscrew .............

(1" x 3 1/2" . GR.5) Spacer ................

Seal ..................

Spacer ................

Carrier, Bearing ....... .

Washer, Hardened ......

Capscrew .............

(3/4" NC x 2 1/4"· GR.5) Retainer ...............

Capscrew .............

(3/4" NC x 23/4" . GR.8)

OTY. 2 16 16 2 4 2 2 40 16 2 12

REF.

PART NO.

406V4007 1 2 { 406V4006 406V4005 36183384 13 14 334V2402 310V3175 15 16 17 18 19

35907444 361A3382 371V3300 310V3394

20 21

360V0417 U404V3321

DESCRIPTION Shim (.005") ............

Shim (.007") ............

Shim (.020") ............

Retainer, Cap ..........

Washer, Hardened ......

Capscrew .............

(5/8" NC x 2 1/4" . GR.5) Sprocket, Drive .........

Ring, Blocker ..........

Washer (Cupped) .......

Capscrew .............

(3/4" NC x 2"· GR.5) Plug (3/4") .............

Bearing ...............

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

KOEHRING

~ CRANES&

EXCAVATORS

TRACTION DRIVE SPROCKET & TRANSMISSION

PAGE 1.3

OTY. 6 6 4 2 12 12 2 2 2 4 2 2

J~ II BI~ 1=111 Ch'i

=Z

Q

6 PLACES

I ~

NOTES

.~

//'~

~,>

3 PLACES

2

//

Y' en

"'" ~ .,.,

47

11

29

/

/

Z

ITEMS 8,

35 /

34

~J

ITEM 11

30

ITEM 45

//r}i~'

ITEM 17

~

~,

<

s:

(JJ

0

s::

0

m

r;;::

(JJ (JJ

c:::

s:

'"m

?l

0

en

HOUSING (SEE NOTES)

m

Z

:l:I

i> r-

0

3 PLACES

;;::

J:o

c:::

(JJ

m '" :l:I

s:

m

J:o

z

J:o

0 0

(JJ (JJ

m

en

'"':;;;:l:I

-<

-I

(5 ;;::

, 36

18 I

37

~~ ~.~:; •

,

-

m

'"

c.

~..

00

g,

I\)

APPLY LOCTITE NO. 515, PLASTIC GASKET TO MATING SURFACE BETWEEN HOUSING & COVER. 11, 18 &22 COAT THREADS OF FASTENERS WITH LOCTITE NO. 242, SCREW LOCK. TORQUE TO 100 FT. LBS. MIN, 225 FT. LBS. MAX, TO ALIGN FLATS WITH LOCKPLATE (10). PER ES 100.1 ASSEMBLE BEAR CARRIER APPLYING LOCTITE NO. 89, SEALANT, BETWEEN CARRIER & HOUSING. COAT ADAPTER SPLINES WITH N EVER-SEEZ, ANTI·CORROSION COMPOUND.

'. @ {jj

m

J:o

34

-.

/~/y~

i" "f""\ I \ ~ -I

-t ::D

i

,,,;c,"

iI;'

•

"

4U

/

/ . . ;!};Cl!J r~ ~"'. • .

4 1 . . '.

42 43

44

16

"

0

fJ

4/,.. 0","" "A" / " . , ' " ' ' "'"

I

co,,, (SEE NOTES)

11

~ !;B 1111111

~

~1

a"':': 1D=a

ASSEMBLE BELLEVILLE SPRINGS AS SHOWN.

il~

il

Q 2c :%l C

m

::!

z

C'l .."

::-

-t ::D

l> Z

:%l

-I

.V> V>

.."

rn

~

"T'I

-<

en 3: en en

m ,.... z

0

?"

Z

::!

0 l>

en

m

l>

en en ~

-<

5 c c

c:

INSTALL BEARINGS ON PINON AS ILLUSTRATED.

5

co m

V>

m

::,.... z

REF.

PART NO.

s:

co

U335F1527(CF) Spec.Ord.

:%l '"

::z 0

310V2846

c

..,m V>

:%l

:;; -I

2 3

360v0417 316V3104

4

310V3190

5 6

364A2892 310V3185

7 8 9 10 11 12

353V5202 403V2601 359A5994 359A5787 359C8681 316v3130

C Z C

"T'I .."

:::%l

-I

:%l

m

~

~ Irl~l~ m 0'; C

Ul'" g-~

~ I')

£.

I')

DESCRIPTION

OTY.

REF.

PART NO.

2

15 16 17 18

359C4108 U404V4014 359C7418 310V2846

2 2

19 20

6

21

1 6

22

2

23

1 1 1 4

24

DESCRIPTION

OTY.

REF.

PART NO.

30 31 32 33 34 35 36

404V3111 359C4105 359B4196 359C4104 403V2980 359C6527 316V2745

DESCRIPTION

OTY.

c:

13 14

361A1464 316V3344

Case Ass'y, Transmission (Includes All Parts listed Below) Capscrew .............

(1/2"NC x 1" . GR.5) Plug, Pipe (3/4") ........

Capscrew .............

(5/8" NC x 3 114" . GR.5) Capscrew .............

(5/8" NC x 7" . GR.5) Spacer ................

Capscrew .............

(5/8" NC x 1 112" . GR.5) Pin, Dowel .............

Bearing, Ball .......... 1 Ring, Retainer ..........

Retainer ...............

Shaft .................

Capscrew .............

(5/8" x 1" . GR. 5) Cover .................

Capscrew .............

(3/4" x 1" - GR. 5)

{ {

{

1 4

25 26 27 28 29

Gear, 3rd Reduction .....

Bearing Assembly ......

Carrier, Bearing ........

Capscrew, Soc. Hd ......

(1/2" NC x 1" . GR.5) 359B7521 Carrier, Bearing ........

460V0416 O·Ring ................

406V4013 Shim (.020) .............

406V4012 Shim (.007) .............

406V4011 Shim (.005) .............

316V2728 Caps crew .............

(1/2" NC x 1 112" - GR.5) 332V2200 Washer, Lock (1/2" STD.) .

359B4111 Retainer ...............

406V2815 Shim (.020) .............

406V2805 Shim (.007) .............

406V2814 Shim (.005) .............

310V3185 Capscrew .............

(5/8" NC x 1 112" • GR.5) 404V3022 Bearing ...............

359C4107 Pinion, 3rd Reduction ...

359C4106 Gear, 2nd Reduction ....

404V3922 Bearing ...............

1 1 1 6 1 1 1 3 3 4 4 1 1 3 3 3

361C1859 359A4102 460V0406 359C6263 460V0405 359C6264 365B1538 43 359B6262 44 - - [ 365C0020 372V1311 359C7216 4 U353V1624 4 a - [ 362V4401 460V0885 420V3887 47 37 38 39 40 41 - [ 42

s-.-[

2 Bearing ~ ..............

1 Pinion, 2nd Reduction ...

1 Spacer ................

Gear, 1st Reduction .... '.:__ .. ~.

2 Bearing ...............

1 Pinion, Motor ..........

8 Capscrew, Soc. Hd ......

(1/2" NC x 6" • STL.) 1 Cover .................

2 Spring ................

1 O-Ring ................

1 Piston ................

1 O-Ring ................

1 Cylinder ...............

2 Gasket (1 each) .........

1 Plate, Thrust ...........

6 Plate .................

5 Disk, Friction ..........

1 Adapter ...............

1 Pin ...................

1 Plug, Pipe (Inc. O-Ring) ., 1 Ring,"O" ..............

1 Breather ..............

3

REF.

-

PART NO.

U2.88C2656-099

DESCRIPTION

Motor, Traction .....•.......

(For Parts See Pg. 1.6, Sheet 1 of 2) 1Gasket... .... .. .. .. .. . . . •. ..

355A2.381 Bo 1 t, Lac k. • • • • • • • • • • • • . . • • • 300V22.78 _ U334v2.664 Washer, Hardened ............

Valve, Counterbalance •......

IA U288c2704 (For Parts See Pg. 1.6, Sheet 2 of 2) Capscrew..... .. .. .. .. . .. . ..• 316V2.306 (3/8"NC x 3/4" Gr. 5) Lockwasher (3/8")...........

333V2003 u359C7908 (cF) Cover, Motor(Excavator) .... .

U359D8631 (cF) Cover, Motor ............... .

(Logger & Kane Loader) I' 359A7913-001 tF) Guard, RH(Shown) ........•...

4 1.359A7913-002f;F) Gua rd, LH...................

Capscrew.. . ... .. . . . .. . . . . ...

316V2305 (3/8"NC x 1-1/2" Gr. 5) 5 Lockwasher (3/8")...........

333V2003 Nut, LockO/8"NC Gr. A).....

340V2323

rli

I

2

2 8

8 2

8

8

1 1

4 4 4

WHEN ORDERING PARTS, SPECIFY MODEl NUMBER, SERIAL NUMBER AND DESCRIPTIDN OF PART REQUIRED

KOEHRING

~.CRANES&

EXCAVATORS

TRACTION MOTORS & COVERS PAGE 1.5

PRIOR SERIAL #21106

4

2 Required Per Machine Quantities Listed Are For One Motor Assembly

REF.

PART NO.

DESCRIPTION-_ ..

-------_.-

U288C2656-099 9014089

I 2

3 4

901 901 460 460 460

3602 4024 0330 0352 0079

Motor, Tract ion ..•...•. ..•• Kit, Viton{Repl.901 3601) .• (Includes All Items Marked With an Asterisk *) Ring, Retainer .....••...... *Sea 1, Viton{Repl.901 3603). *O-Ring .....•............... *O-Ring ..•.......•...•...... *O-Ring {Tube Fitting) ..... .

(Included In Kit,Not Shown)

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

KOEHRING

CRANES &

EXCAVATORS

TRACTION MOTOR ASSEMBLY PAGE

1.6 Sheet 1 of 2

3

4

22

2 Requ i rea-Per-Mach i ne Quantities Listed Are Fa 1One Valve Assembl .

11

RELIEF VALVE ASSEMBLY

/

--,

\

to 100-105 Ft. Lbs.

Install

~ck-Up Ring

W/Radius Or ientat-ed As ~2 .. lllustrat",g.

18

19

REF.

PART NO.

901 3620 I 2 3 4 5 6 7 ~

901 901 901 460 1160 901 901 901

DESCRIPTION --_._-

----------

U288C2704 901 3619

3621 3622 3623 0208 0120 3624 3625 3626

17

16

QTY.

15

14

13

12

REF.

PART NO.

DESCRIPTION

QTY.

9 10 II 12 13 14 15 16 17 18 19 20 21 22 23

901 3627 901 3634 901 3628 460 6003 901 3629 901 3630 901 3631 901 3670 460 0812 901 3632 901 3633 90lV3851 90lV3861 90lV3862 90lV3863 1218-284

Ba II, Steel ............ *O-Ring .................

Valve, Re lief .......... "*0- Ring ................. "*Ring, Back-Up ..........

Spring, Pressure ....... '*Sea I, Step wiD-Ring .... ·*O-Ring ................. "*O-Ring .................

Spring, Pressure ....... o*Nut, Seal Lock .........

Sc rew ..•............... *PI ug ............. '" ., .

Screw, Sock Hd Metric ..

Screw, Sock Hd Metric .. *O-Ring (Tube Fitt i ng) ..

(I nc I uded in Kit But Not Illustrated)

I I 2 I

-~--------.

Valve, Counterbalance ..

Ki t, Sea I ..............

I (Includes All Parts Ma rked Wi th An Asterisk "J Ki t, Rei i ef Va I ve ......

(Includes All Pa rt 5 Marked Wi th A Dot ") Ring, Retainer ......... ;.!:Sea 1, Ring .............

2 Spring, Pressure .......

2 2 "O-Ring ................. *O-Ring .................

2 Plug wiD-Ring ..........

2 Screw, Socket Hd .......

4 *0- Ring .................

I I

I I I I I I 2 2 8 2

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

lU"I KOEHRING ~ CRANES&

EXCAVATORS

COUNTERBALANCE VALVE ASSEMBLY PAGE

1.6 Sheet 2 of 2

11

\0

COMPLETE ROLLER ASSEMBLIES ARE INTERCHANGEABLE. BEFORE ORDERING INTERNAL PARTS CHECK ROLLER FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW.

2

I

4

REF.

PART NO.

{ 2 3 4 5 6 7 8 9 10 II 12 13 14

{

OESCR I PTI ON

OS Italtractor Intertractor ITm or ITs

OS Berco U422V0037

U422V0039

U422VOl29

N/S N/S N/S 90lV2010 N/S 90lV2014 N/S

N/S N/S N/S 90lV2049 N/S 90lV2047 N/S N/s

N/S N/S N/S 901V2240 N/S 90lV3307 N/s

N/S N/S 90lV2055 N/S 90lV2053 N/S N/S

N/S N/S 901V2229 N/S 90lV3301 N/S N/S

N/S N/S N/S U90lV2212 N/S 90lV2018 N/S N/S

Roller Assemb I y .•...........

(I nc I. Parts Li s ted Below) Bol t ........................

Lockwasher ..................

PI ug .......... " ............

Sea I ........... " ... , .......

Cover .......................

Sea I ........................

Bol t ...•............ , .......

Plate, Lock .................

Lockwasher ............. , ....

Reta i ner ....................

Bearing Ass I y • . . . . . . . . . . . . . .

Seal Group ..................

Shaft .......................

Sea I, Shaft. ................

Ring, Retainer ..............

Collar Assemb I y ........•....

3 3 I I I 2 I 2 I 2

WHEN ORDERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIRED

IIIWI KOEHRiNG . . . . CRAHES& EXCAVATORS

CARRIER

ROLLER ASSEMBLY PAGE 1.7

4

COMPLETE ROLLER ASSEMBLIES ARE INTERCHANGABLE. BEFORE ORDERING INTERNAL PARTS CHECK ROLLER FOR VENDOR MAKE AND ORDER FROM CORRESPONDING PARTS COLUMN BELOW.

REF.

PART NO.

I

2 3 4 5 6 6A 7 8

{

DESCRIPTION

QTY.

DS Italtractor Intertraetor ITm or ITs

DS Bereo U422V0035

U422V0036

U412V9222

N/S U90lV2095 90lV2032 N/s 90lV2036

N/S 90lV2006 90lV2008 N/S 90lV2004 90lV2003

901VI461 29087 901VI408 N/S 90lVI395 90lVI396

90lV2039

30 I 1462

90lV2029 90lV2028 90lV2030 90lV2033

Ro Iler Assemb I y •••.•••..••••.

(I ne I. Parts Li s ted Below) Collar, End .......... , .......

Seal Group ...................

O-Ring .......................

Shaft. .......................

Bushing ......................

Plug w/Gasket. ...............

Plug .........................

Gasket .......................

Pi n ..........................

Ring, Thrust .................

2 2 2 I 2 I 2 2

WHEN OROERING PARTS. SPECIFY MODEL NUMBER. SERIAL NUMBER AND DESCRIPTION OF PART REOlllRED

1"-1 KOEHRING ~~::~RS

LOWER

ROLLER ASSEMBLY

• _ _ _ _ ._._ _ _ _ _ _....l ......... _ _ _ . _ _ _ _ _ _ _ • _ _ _ _ _ . _ _ _ .. _ . __ .. _.

®

DISCONTINU

NUMERIClll PARTS LIST FOR REPLACEMENT PART(S)

PAGE 1.8

PRIOR SERIAL #21149

4

IMPORTANT

WHEN ORDERING TRACK ASSEMBLIES OR PARTS. IDENTIFY THE FOLLOWING BEFORE ORDERING: 1

CHECK VENDOR MAKE. THIS IS INDICATED ON THE CHAIN LINKS BY: I BERCO

,Tm ,Ts USE CORRESPONDING PARTS COLUMN FOR ORDERING. 2.

IF ORDERING LINK PARTS, CHECK PIN FOR INDENTATION

MASTER LINK PIN MARKED WITH AN INDENTATION ON BOTH SIDES

ON ENDS. THIS INDICATES THAT THE ITEMS ARE PART OF THE MASTER LINK 3

IF ORDERING SHOES. CHECK SHOE LENGTH (24", 30", 36")

2

AND TYPE ITRIPLE GROUSER, SINGLE GROUSER, FLA TI

REFER TO SERVICE MANUAL FOR CORRECT TORQUING PROCEDURE

COMPLETE TRACK GROUPS ARE INTERCHANEABLE. INTERNAL PARTS MUST BE IDENTIFIED.

REF.

PART NO.

DESCRIPTION QTY, OS OS OS Italtractor Ita ltractor Intertractor (Sealed) U422VOO40 u422VOO19 U422V0145 U422VOO41 Track Ass' y, 36", .... " ....

(Inc!. Items 1 thru 9) 901V2113 901V1586 901V1586 901V2088 Shoe06" Triple Grouser).,. 50 U422VOl14 U422VOl16 U422V0144 u422VOl15 Track Ass' y, 30".,., ...... .

(Inc!. Items I thru 9) 901V2566 901V2958 901V2566 901V2956 ShoeOO" Triple Grouser) ... 50 U422VOO90 U422VOO92 U422V0143 U422VOO91 Track Ass' y, 24" .......... . ( I nc I. I terns I t h ru 9) 90lV2959 901V2567 901V2567 90lV2086 Shoe(24" Triple Grouser) ... 50 ITEMS BELOW INCLUDED IN ALL ABOVE TRACK ASSEMBLIES 901V2115 90lVl870 901VI870 901 v2084 Bo 1t (3/4"). ................ 200 90lV3011 Bol tOO" only) ............ 200 901V2114 90lV2142 901V2142 901 v2085 Nut. ....................... 200 U901V2128 U90lV2580 U901V2130 Chain, Link (50 Links) ..... 1 (Incl. Items 4 thru 9) TRACK LI NK PARTS 901V2125 90lV2134 901V2134 Link, Track (RH) ........... 49 901V2077 90lV2124 901V2135 90lV2135 90lV2078 Link, Track (LH) ........... 49 90lV2120 90lV2138 90lV2138 901V2081 Bushing, Track ............. 49 901V2121 901V2140 901V2140 901 V2080 Pin, Track ................. 49 901V2116 901V2145 Seal, Washer (Cupped) ...... 196 MASTER LINK PARTS 901V2123 901V2136 901V2134 Link, Master (RH) ........ ,.

901 V2077 901V2122 901V2137 901V2135 901V2078 Link, Master (LH) ........ ,. 1 901V2118 901V2139 901V2139 Bushing, Mster ......... , ... 1 901V2079 901V2119 901V2143 901V3752 901V2083 Pin, Master................ 1 901V2116 901V2145 Seal, Washer (Cupped) .. ,... 4 901V2117 901V2144 Spacer (Collar)............ 2 901V2082 901V3753 OS Berco

2 3

4 5 6 7 8 4

5 6 7 8 9

WHEN OROERING PARTS, SPECIFY MOOEL NUMBER, SERIAL NUMBER ANO DESCRIPTION OF PART REOUIREO

1"I KOEHRiNG . . . CRANES& . EXCAVATORS

~ ®

DI';!'ONTINUFO PAIH' RHFR

TRACK ASSEMBLY

--_._-------_._-_ .. _ . _ - - ERICAl PARTS LIST FO.R REP! ACEMENT PART(S)

----.---------t

PAGE 1.9

SERIAL #21149 THRU #211"

~

3

I

IMPORTANt WHEI\j ORDERING TEACK ASSEMBLIES OR PARTS, IDENTIFY THE FOLLOWING BEFORE ORDERING: CHECK VENDOA MAKE THIS IS INDICATED ON THE CHAIN LINKS BY' BERCO

,Tm USE CORRESPONDING PARTS COLUMN FOR ORDERING IF ORDERING LINK PARTS, CHECK PIN FOR INDENTATION ON ENDS THlt, INDICATES THAT THE ITEMS ARE PARi OF THE MASTER LINK

MASTER LINK PIN MARKED WITH AN INDENTATION ON BOTH SIDE5

IF ORDERING SHOES. CHECK SHOE LENGTH AND TYPE iTR!PlE GROUSER, SINGLE GROUSER, FLAT)

REFER TO SERVICE MANUAL FOR CORRECT TORQUING PROCEDURE

COMPLETE TRACK GClOUPS ARE INTERCHANEAB~E, INTERNAL PARTS MUST BE IDENTIFIEO,

REF.

PART NO. DS Berco

DS I taltractor

U422VOl64

U422VOl65

90lV2113

90lVI586

2 3

90lV2115 90lV2114 U90lV2128

90lVI870 90lV2142

4 5 6 7 8

90lV2125 90lV2124 90lV2120 90lV2121 901 V21 16

DESCRIPTION

QTY.

Track Ass'y, 35· 5" ••....•.••.

(I nc I. Items I thru 9) Shoe (35.5" Triple Grouser) .. 52 Bol t, 3/4" .•.......••....•... 208 Nut •..•.•..•.........•....•.. 208 I Chain, Link (52 1 inks) .......

(I nc I. Items 4 thru 9)

TRACK LI NK PARTS 90lV2134 90lV2135 90lV2138 90lV2140

Link, Track (RH) .......•...•. 51 Li nk, Track (LH) ...........•. 51 Bushing, Track .......•...•..• 51 Pin, Track ...•...•..•.....•.. 51 Sea I, Washer (Cupped) ........ 204

HASTER LINK PARTS 4 5 6 7 8 9

90lV2123 90lV2122 90 I V2118 90lV2119 90lV2116 90lV2117

90lV2134 90lV2135 90lV2139 90lV3752 90lV3753

Li nk, Ma 5 te r (RH) ............

Li nk, Master (LH) ............

Bushing, Master ...•..........

Pin, Master ..................

Sea I, Washer (Cupped) ........

Spacer (Collar) ..............

I 4 2

WHf.N OROERING PARTS, SPECIFY MODEl NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REOUIHED

IIIWI KODIRiNG ~ CRAHES&

EXCAVATORS

®

OISl'ONTINUU) PoUlt' RfHH

TRACK ASSEMBLY PAGE \IME fllCAL PARTS LIST FOR REPLACEMENT PART IS)

1.9A

BEGIN SERIAL #211 _

MPORTANT WHEN ORDERING TRACK ASSEMBLIES OR PARTS. IDENTIFY THE FOLLOWING BEFORE ORDERING: 1

CHECK VENDOR MAKE. THIS IS INDICATED ON THE CHAIN LINKS BY: BERCO

,T

I USE CORRESPONDING PARTS COLUMN FOR ORDERING 2.

IF ORDERING LINk PARTS, CHECK PIN FOR INDENTATION ON ENDS THIS INDICATES THAT THE ITEMS ARE PART OF THE MASTER LINK.

3

,a: ORDERING SHOES, CHECK SHOE LENGTH

MASTER LINK PIN MARKED WITH AN INDENTATION ON BOTH SIDES

AND TYPE ITRIPLE GROUSER. SINGLE GROUSER. FLATt

REt=ER TO SERVICE MANUAL FOR CORRECT TORQUING PROCEDURE

COMPLETE TRACK GROUPS ARE INTERCHANEABLE. INTERNAL PARTS MUST BE IDENTIFIED.

REF. Berco U422V0158

2

3

4 5 6 7

4

5 6

7 8

1"'1

PART NO. Italtractor Intertractor u422V0159

DESCRIPTION

QTY.

U422V0160

Track Ass'y, 29.5" STD ......

(I ncl. Items I thru 8) Shoe (29.5" Double Grouser). 52 U422V0161 U422VOl62 U422VOl63 Track Ass'y, 29.5" STD ......

(I nc I. Items I thru 8) Shoe (29.5" Triple Grouser). 52 U422V0155 U422V0156 U422VOl57 Track Ass'y, 29.5" ES .......

(I nc l. Items I thru 8) Shoe (29.5" Triple Grouser). 52 901V3978 U422VOl52 U422VOl53 U422VOl54 Track Ass'y, 35.4" ES .......

(I nc l. Items I thru 8) Shoe 05.4" Triple Grouser}. 52 90lV3979 I TEMS BELOW I NCLUDED I N ALL ABO)lLT~~c;.'-U\_?SE~BLJ ES Bolt, 7/8" .................. 208 901V3980 Nut ......................... 208 90lV3981 Chain, Link (52 Links) ...... I 90lV3982 (Incl. Items 4 thru 8) TRACK LINK PARTS Link, Track (RH} ............ 51 901V3984 Link, Track (LH} ............ 51 901V3983 90lV2081 Bushing, Track .............. 51 90lV2080 Pin, Track .................. 51 MASTER LINK PARTS Link, Master (RH} .......... .

90lV3984 Link, Master (LH} .......... .

90lV3983 Bushing, Master ............ .

90lV2079 Pin, Master ................ .

90iv2083 901V2082 Spacer, Collar .............. 2

WHEN OROERING PARTS, SPECIFY MODEL NUMBER, SERIAL NUMBER AND DESCRIPTION OF PART REQUIRED

KOEHRiNG EXCAVATORS

~ CRANES&

TRACK ASSEMBLY PAGE

1 _9B

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL

• Thank you very much for reading the preview of the manual.

• You can download the complete manual from: www.heydownloads.com by clicking the link below

• Please note: If there is no response to CLICKING the link, please download this PDF first and then click on it.

CLICK HERE TO

DOWNLOAD THE COMPLETE MANUAL