Air Handling Units DB

AIR-HANDING UNITS Products

OUTSIDE HUMIDITY

35°C 45°C

90% 40%

22º C

Inside

PROVIDED BY HEINEN & HOPMAN

1

Air handling units - HEINEN & HOPMAN 2020 ©

Heating

Ventilation

Air Conditioning

Air handling units - HEINEN & HOPMAN 2020 ©

Refrigeration

1

COMPANY INTRODUCTION Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to ensure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way.

In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.

OPERATING GLOBALLY Global networking is crucial in every line of business and the shipping industry is certainly no exception. Being able to offer the highest quality of service and products to our clients at all times and in all places is of enormous importance to us. This is why Heinen & Hopman aims to keep expanding our network and know-how and ensure we are exactly where our clients need us to be.

Europe 22 Offices

1200 Employees

4

Factories

11

Countries

Americas 11 Offices

1

220 Employees

Air handling units - HEINEN & HOPMAN 2020 ©

3

Countries

3

Factories

Asia 10 Offices

380 Employees

7

Factories

7

Countries

Air handling units - HEINEN & HOPMAN 2020 ©

1

APPLICATION Air handling units DB are used for the offshore and marine industry. The air handling units are specially designed to be compact and allow for fitting in the often limited space of ships, yachts and offshore modules. The fans are made of high-quality materials to withstand the extreme sea climate conditions.

The air handling unit is made of the most sturdy materials to withstand extreme cold or hot and humid air conditions, the salt sea air and the extreme environments.

Standards

The units comply with the following guidelines: Machinery Directive 2006/42/EC Low Voltage Directive 2006/95/EC ATEX 94/9 / EC (ATEX 95) EMC Directive 2004/108/EC Pressure Equipment 97/23/EC The units conform to the following casing-properties (according to EN 1886): Mech.

• Casing strength: D1 • Casing air leakage: L1 • Filter bypass leakage: F9 • Therm. transmittance: T2 • Thermal bridging factor: TB2 Certification

•

2

ISO 9001

Air handling units units--HEINEN HEINEN&&HOPMAN HOPMAN2020 2020© ©

Air handling units - HEINEN & HOPMAN 2020 ©

2

3

Air handling units units--HEINEN HEINEN&&HOPMAN HOPMAN2020 2020© ©

Air handling units - HEINEN & HOPMAN 2020 ©

3

4

Air handling units - HEINEN & HOPMAN 2020 ©

Air handling units - HEINEN & HOPMAN 2020 ©

4

MATERIAL Casing The casing is built out of a aluminium framework (optional: galvanized steel or welded stainless steel AISI316L) holding double walled panels and, if required, provided with inspection doors. The thickness of the framework is at least 2mm, depending on size and application. The double walled panels are made of galvanized steel (optional: stainless steel AISI316) and insulated with 40mm thermal and acoustic insulation, Rock- wool type 223 cross section, other insulation are possible on request. Sheet thicknesses are available from 1mm up to 2mm. Air handling units outdoors are provided with pitched roof plates and 50mm overhanging eaves.

Doors The inspection doors are fitted with polished AISI316 stainless steel locks and hinges which are mounted on the outside of the panels to avoid thermal bridges. Doors that close overpressure sections are provided with a safeguard to prevent dangerous situations. Not self- adhesive EPDM rubbers are used to prevent air leakage.

Grounding All components are provided with 16mm2 earth-bonding.

Electric heater The electrical heaters meet the requirements of Lloyds and Veritas. The terminal box is made of galvanized steel and also the casing, the elements are made of inox steel. The connections are sealed to avoid moisture between the jacket and the elements. Because of vibrations, the elements are supported at the ends. The electrical heaters are provided with a maximal temperature protection. The heater complies with protection degree: IP44. The electrical heaters are also available in EX-type, entire heater is fully made of stainless steel AISI316 and complies with classification: Ex ed IIC T3 (optional: zone I and zone II) and protection degree: IP65.

Cooling coil The cooling coil is selected according to the project specific air conditions and refrigerant type. Direct expansion, seawater and chilled water are common applied refrigerants.

The coil can be produced in Cu/Al, Cu/Cu, CuSn/CuSn, stainless steel/ aluminum or titanium in the case of seawater. An anti-corrosive Poly/Al coating can be applied after manufacturing. If the face- velocity of the coil is higher than 2.5 m/s a Polypropylene mist eliminator is installed. Optionally the mist eliminator is carried out in stainless steel AISI304 or AISI316. The cooling coil is provided with a stainless steel AISI316 frame and positioned above a stainless steel AISI316L drip tray provided with a 1” condensate drain.

Heating coil These can be supplied in the same design as the coolers except the heating coils are suitable for steam, hot water or another heating medium.

Base frame To support the units during transport and on-site, the air handling units are mounted on a rigid base frame. The base frame is made of hot dipped galvanized mild steel beams or bended 4 mm stainless steel AISI316L U-profiles which are welded by certified welders. The main welds can be exposed to non-destructive testing (NDT) to check on imperfections. Hoisting lugs are standard equipped with a RAL1028 yellow coating. The frames are provided with diagonal positioned earth bosses.

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com 5

Air handling units - HEINEN & HOPMAN 2020 ©

Air handling units - HEINEN & HOPMAN 2020 ©

5

Filters The unit is standard fitted with EU-4 pleated filters that will be mounted in galvanized steel filter frames. The filters are grounded through a detachable clip on the filter frame. An inspection door is provided on the inlet side of the filter, so maintenance and inspection takes place on the dirty side. Optionally, the unit can be equipped with ATEX, HEPA filter or coalescer.

Weather louvers If the unit takes in fresh air, the unit will be equipped with a weather louver. The inlet section can be performed with a mist eliminator and/or coalescer behind the louver and the intake damper to avoid water infiltration during extreme weather conditions.

Dampers Contra rotating dampers, the casing, valves, shafts, levers and connecting rods are made of stainless steel AISI316. The rate of leakage is ≤ 0.032 m3/s/m2 at a pressure difference of 1000 Pascal (tested with a damper with dimensions of 1200x1500 mm.) The valves can be operated manually or by means of an electric servo motor or pneumatic actuator.

Air flanges The air flanges are carried out in 4mm to 6mm galvanized steel (optinal: stainless steel), depending on the size and application, and foreseen with a specific-hole pattern.

Fans Fans are generally direct driven plug-in type. The impeller consists of coated steel and the base frame is made of stainless steel AISI316. Optionally, stainless steel AISI316 backward curved double inlet centrifugal fans are used. The fan and motor are assembled on a common frame and isolated from the casing by vibration dampers and flexible connections. Fans for Zone 1 or Zone 2 are fitted with brass inlet cones and other measures to reduce the chance of sparks. Access to the fan sections is provided with perforated CE grids for safety.

Note: Plug-in type fan till max. 600Pa static pressure and centrifugal fan for higher pressure.

Motors ATEX units are standard equipped with 3 phase low voltage 50 Hz and 60 Hz cast iron motors with offshore coating. The motors can be supplied in Zone 1 and Zone 2 version.

Controls/Wiring The electric wiring consists of flame retardant PVC halogen-free cables both unarmed and armored. For the wiring of the various electrical components from the inside to the outside are standard brass CMP A2 cable glands for unarmored cables installed. In case of armored cables there will be standard E1FX TRI-STAR cable glands used. Optionally, the wiring can be performed on stainless steel AISI316 ship-ladder cable trays.

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com 6

Air handling units - HEINEN & HOPMAN 2020 ©

Air handling units - HEINEN & HOPMAN 2020 ©

6

AIR HANDLING UNIT SELECTION

Maximum air quantity for a standard AC unit

1

Unit Size

2

3

4

5

6

7

8

Height of the unit excl. bedfranme

H

780

780

1280

1530

1530

1530

2100

2600

Width of unit*

W

780

1280

1530

1530

1700

2100

2600

2600

Length of mixing section

Lm

1000

1000

1200

1400

1550

1700

1900

2100

Lf

250

300

400

500

700

800

900

1200

Length of fan section

* The width of the unit can increase in extreme outside conditions

Dimensions of various parts of a standard AC unit

Mixing section

7

Air handling units - HEINEN & HOPMAN 2020 ©

Fan section

Air handling units - HEINEN & HOPMAN 2020 ©

7

SECTION SELECTION

The length of the air-handling unit depends on the selected options. The sections that are listed here below included the mixing section and the fan section determine the overall length of the air handling unit.

Length in mm Symbol

Function

1

2

3

4

5

6

7

8

Filter section: EU-4 class filter. Other filters (G3-F9 filters), HEPA filters and carbon filters are available on request.

450

450

450

450

450

450

450

450

Heating coil: Steam, hot water, thermal oil or electric.

200

200

200

200

200

200

200

200

Cooling coil: Chilled water or direct expansion (including droplet separator) *Based on Tin 5oC - Tout 11oC with cooling capacity of 50kJ/kg.

660

660

660

660

660

660

660

660

Steam humidifier

500

500

500

500

500

500

500

500

Droplet separator

150

150

150

150

150

150

150

150

480

550

Silencer: The length depended on needed sound reduction value.

Rotating enthalpy exchanger

Possible length: 500 - 750 - 1000 - 1250 - 1500

400

400

400

400

480

480

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com 8

Air handling units - HEINEN & HOPMAN 2020 ©

Air handling units - HEINEN & HOPMAN 2020 ©

8

Austria T: +43 1720 1309 E: info@drewsmarine.com Brazil T: +55 213 587 4241/4244 E: info@br.heinenhopman.com Canada T:+1 450 659 6571 E: info@bronswerkgroup.com Denmark T: +45 5164 1614 E: admin@teknotherm.no France - La Ciotat T: +33 4 4204 8685 E: info@heinenhopmanfrance.com France - Antibes T: +33 4 8902 4562 E: info@heinenhopmanfrance.com Germany T:+49 4073 1680 E: info@drewsmarine.com Germany T:+49 471 9869 300 E: info@moehringms.com

India T: +91 336 499 1293 E: info@heinenhopmanindia.com Italy T: +39 187 187 8500 E: info@it.heinenhopman.com The Netherlands (HQ) T: +31 33 299 2500 E: info@heinenhopman.com The Netherlands - Rotterdam T: +31 18 020 9210 E: binnenvaart@heinenhopman.nl Norway T: +47 6919 0900 E: admin@teknotherm.no Peoples Republic of China T: +86 213 253 2896 E: info@cn.heinenhopman.com Peoples Republic of China T: +86 510 8528 1763 E: admin@teknotherm.no Poland T: +48 914 331 800 E: admin@teknotherm.no

Heinen & Hopman encourages a more sustainable world. By providing eco-friendly solutions and services we offer our clients the option of reducing energy consumption and thus CO2 emissions.

Romania T: +40 236 448 222 E: office@ro.heinenhopman.com Russia T: +7 812 449 3535 E: info@heinenhopman.ru Singapore T: +65 6897 7879 E: info@sg.heinenhopman.com South Korea T: +82 704 901 0000 E: info@kr.heinenhopman.com Spain T: +34 932 259 668 E: info@es.heinenhopman.com Sweden T: +46 3121 7500 E: admin@teknotherm.no Turkey T: +90 216 493 8118 E: info@tr.heinenhopman.com UAE - Abu Dhabi T:+971 2550 4147 E: info@caspuae.com

UAE - Dubai T: +971 4263 5453 E: info@caspuae.com USA - Seattle, Washington T: +1 206 632 7883 E: sales.uk@teknotherm.com USA - Fort Lauderdale, Florida T: +1 954 463 0110 E: info@arwmaritime.com USA - Houma, Louisiana T: +1 985 876 7982 E: leblanc@leblancandassociates.com

you require more information “ Do about our products or do you

“

require advice? I am keen to help you further!

Eric Stoffelsen

-

Sales Manager sales@heinenhopman.com

OUTSIDE HUMIDITY

35°C 45°C

90% 40%

22º C

Inside

PROVIDED BY HEINEN & HOPMAN

www.heinenhopman.com 9

Air handling units - HEINEN & HOPMAN 2020 ©

Heating

Ventilation

Air Conditioning

Air handling units - HEINEN & HOPMAN 2020 ©

Refrigeration

9