Gilmore
Pressure Regulator, Compensator
Compensated spring chamber protects against harsh subsea conditions. This Gilmore GEN2 Pressure Regulator with spring chamber Compensator has the same identical flow port footprint as the legacy regulators. This thoroughly redesigned product offering provides and improvement in cycle life and performance. Significant engineering enhancements: • Guided hydraulic damping technology • Enhanced bolted plunger guide • Improved set point resolution
INFO@gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR, COMPENSATED -041221-001-01
Gilmore Pressure Regulator, Compensator
GEN2 Pressure Regulator, Compensator Protected mounting bracket Fill port
Fully enclosed spring chamber
CRA springs Guided wear band
Tungsten Carbide shear seals
Auxilliary port
Benefits Qualified above API 16D requirements 10,000 cycles at full flow rates and pressures Extended adjustable regulated pressure rangeavailable from 2,000 psi to 4,500 psi with Compensator Guided hydraulic damping technology Improved deadband performance Enhanced bolted plunger guide Upgraded dynamic plunger T-Seal Threaded seal carrier alignment SAE code 62 connections Fully enclosed spring chamber
• Outlet and Inlet • Multiple ranges from 2,000 psi to 4,500 psi regulated pressure • Other options available
DRILLING | PRODUCTION | INDUSTRIAL INFO@gilmore.com INFO@Gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR, COMPENSATED -041221-001-01
CRA Material Construction • Refined Tungsten Carbide seal trim • Nitronic 60 Plunger and Seal Carrier • T316 Spring Housing *Patented