Rosemount Model 1195/ProPlate/Mass ProPlate
Failure to follow these installation guidelines could result in death or serious injury: •
Receiving and Inspection
Make sure only qualified personnel perform the installation.
ProPlate/Mass ProPlate flowmeters are available in different models and with different options, so it is important to inspect and know which model you have before beginning installation. Upon receipt of the shipment, check the packing list against the material received and the purchase order. All items are tagged with a model number, serial number, and customer tag number. Report any damage to the carrier.
ProPlate/ Mass ProPlate Configurations
The ProPlate/Mass ProPlate is available in a variety of mounting configurations and has two methods of electronic mounting: integral mount (or, direct mount) and remote mount. An integrally-mounted ProPlate/Mass ProPlate may be shipped with the electronics already bolted directly to the sensor.
Figure 2-4. ProPlate Mounting Configuration Examples: A (Integral Mount) and B (Remote Mount).
A
B
The ProPlate/Mass ProPlate may be purchased as a flow calibrated unit for enhanced accuracy and turndown, or as a non-flow calibrated unit. The flow calibrated units are identified by the model callout. NOTE Replacing the electronics may affect performance.
Structural Limitations
Exceeding the ProPlate structural limitations may cause the sensor to fail.
Structural limitations can be found in Table 10-1 on page 10-2.
2-6