17. Select Flow Units. 18. Select Finished. Figure 6-26. Flow Setup Complete Screen.
19. This screen provides you three options. • File saves the flow information to a configuration file, which can be sent by selecting Transmitter, Send Config... as explained on page 4-39. (recommended). • Connect switches to the Connect screen so that the flow configuration can be sent to a transmitter. • Return switches to the EA. NOTE File is recommended because it provides you with an electronic record of your flow configuration.
NOTE If you selected custom fluid, or made density or viscosity changes to an AIChE fluid, be sure to save your information to a configuration file so that you can modify the flow configuration information at a later date. Although you can read a flow configuration from a transmitter, it is NOT possible to retrieve custom density, custom viscosity, or custom primary element information. Therefore, be sure to save custom fluid configurations to a unique file. Setup Units This screen sets the units for the five process variables: Differential Pressure, Absolute Pressure, Gage Pressure, Process Temperature, and the Flow units.
6-31