POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
ETL Listed to UL 844 (option EX) & UL 1598
ETL Listed to UL 1598A Marine Vessels, IP66 & IP67**
ETL Listed to CSA C22.2 No. 250.0:2008 Canada
ETL Listed to CSA C22.2 No. 137:2018 (option EX)
ETL Listed Class I, Division 2, Groups A, B, C, D, T5 (option EX)
ETL Listed Class I, Zone 2, Groups IIA & IIB+H, IIC, T5 (option EX)
Registered ISO 9001:2015
ICAO Annex 14, Volume II, Heliports, 5.3.9
American Bureau of Shipping (ABS) Type Approved Product
The PSF 5306x is a well controlled very low height LED surface mounted helipad and helideck floodlight The fixture’s beam is narrow vertically and cutoff by the visor. The horizontal beam is effective over more than 120 degrees wide The purpose of the PSF is to provide light "washing" the landing surface that provides improved conspicuity and depth perception to the pilot. There is a cable loop that exits the rear of the floodlight It may be installed as a 2 inch height light directly on the surface or trunnion mounted from greater elevation. Standard with visor, adjustable L brackets and black anodized finish.
Point Type Options
PSF 53063 6 AC only: 96 305V, 50/60 Hz & High Intensity
PSF-53062-3 DC only: 10.8 26.4V & Medium Intensity
V: Visor, 6 inch projection (required)
T: Trunnion Mount
SF: Slipfitter, Stainless Steel*
2P: Frangible Coupling, EMT* Detail H54
WW: Walkway Light, Reduced Intensity
BOL:Portable Battery Powered DC
SOL: Portable Solar Powered DC***
PSF 53062 PSF 53063
Intensity: 2,052 lumens 4,725 lumens Peak: 6,977 candelas 14,175 candelas Power: 21.3 W (DC) 32.2 W 34.1 VA (AC)
Horizontal Beam % of Peak at +/ 30 deg: 70%
Horizontal Beam % of Peak at +/ 45 deg: 35%
Horizontal Beam % of Peak at +/ 60 deg: 10%
LED rated average life: 100,000 hours
Rated color temperature: 6,500 Kelvin Temperature Range: 40 to +55 deg C Frequency: 50/60 Hz
Ingress Rating: IP66 & IP67 ** Weight: 8.0 lbs (3.6 kg)
L brackets will adjust overall height to between 2.0 & 2.6 inches. The beam angle may be adjusted vertically between +15 degrees & 15 degrees.
All external hardware is grade 316 (A4) stainless steel.
Metal castings are copper free (< 0.2%) heat treated aluminum.
PLS: Base & Baseplate Detail H58 with option T
PLS: Base & Baseplate Detail H74 without T
JBS: Junction Box, Surface* Detail H59
JBP: Junction Box, Parapet*
JB: External Junction Box Details H70 & H71
JBX: External Junction Box Class I, Div 2
EX: Class I, Division 2 (Zone 2) PSF 53063 only
RF: Wireless switching by handheld device^
PSF 53063 6 HIGH INTENSITY ^ For PSF BOL battery light only * Requires option T ** PSF 53063 is IP67; both are IP66 *** PSF 53062 3 with wireless ON OFF operation
53063 6 T PLS per Detail H58
1
HL208 September, 2022
PSF
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
PSF 53063 6 BRIGHTNESS CONTROL WITH 3 STEPS
PSF 53063 is compatible with Point Lighting brightness control technology. Brightness control requires the use of a PHC 66002 lighting system controller with option BC. The brightness is adjustable in three steps which are configurable on site This floodlight brightness control is separate from perimeter light option VB 3 step brightness control.
PSF 5306x Standard with adjustable “L” brackets for floor mounting. The floodlight may be tilted a maximum of 15 degrees up or down.
PSF 53063 6 T HIGH INTENSITY WITH TRUNNION 4 holes Top View Front View 1.96” 21.5” 25.5”
24 0”
PSF 53062 3 BOL Battery Powered Portable Surface Floodlight
Two (2) hours total run time 7,000 candelas Rechargeable AGM battery Optional wireless operation ( RF) Carrying handle May be staked or weighted in place Made in USA
2
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE WITH CARRYING CASE
PSF C093 PORTABLE WIRELESS SURFACE FLOODLIGHT SET
PSF C093 includes battery, mounting plate, AC charging cable, wireless antenna, handheld wireless operator and strong permanent carrying and storage case with wheels.
Sold as a set of two (2) floodlights PSF 53062 3 C093 RF with carrying case and the above accessories. The wireless device operates at 918 MHz. The estimated runtime on full charge is over nine (9) hours.
PSF 53062 3 C093 RF
Battery Powered Portable Surface Floodlight
PSF C093
Set of two (2) floodlights with all required accessories & wheeled carrying case
3
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE OR FIXED SOLAR POWERED
PSF 53062 3 SOL C094A V FOR
WIRELESS SWITCHING
This solar powered LED surface floodlight is a full brightness 4,800 candelas flood with wireless ON OFF operation to a maximum run time of two (2) hours per night based on 20 deg C ambient Run time is reduced in cold weather.
May be screwed in place. Includes visor ( V).
Optional foot plate ( FP) for staking or weighting with sandbags or blocks.
Adjustable tilt angle.
Onboard wireless signal receiver & antenna for ON OFF operation
Wireless activation with handheld device PL11572 TRANS ( C 094A) or key fob included with C094.
Note: PL11572 TRANS must be ordered separately one per site for any C094A system.
Tested and certified to ingress protection IP66.
PSF 53062 3 SOL C094A V
Solar Powered Surface Floodlight For Wireless Operation
PSF 53062 3 SOL C086 V FOR ALL NIGHT OPERATION
This version has a low profile, larger array and battery that allows the floodlight to operate all night automatically without manual switching at any site with an insolation value of 2.0 kWh/m2/day or higher.
PSF 53062 3 SOL C086 V
Solar Powered Surface Floodlight
Operates All Night Automatically
4
5 POINT SURFACE FLOODLIGHT PSF LED HELIPORT LOW PROFILE FLOODLIGHT EXTERNAL JUNCTION BOXES Option JBX Class I, Division 2 External Junction Box for use with PSF 53063 6 EX see drawing 803358 Option JB Safe Area External Junction Box for use with PSF 53063 6 & PSF 53062 see drawing 803357 Typical Mounting PSF External Junction Box Standard with two 1 inch NPT feed thru hubs
POINT SURFACE FLOODLIGHT
PSF LED HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
Note: These details are compiled in the pdf file 0MOUNTINGS and are available in CAD upon request.
6
POINT HELIPORT LIGHTS PHL LED v5
Compliances: ETL Listed per UL50 & UL1598 at 40 deg C to +50 deg C
ETL Listed to CSA C22.2 No. 137 M1981
FAA AC 150/5390 2B Heliport Design Guide
ICAO Annex 14, Volume II Registered ISO 9001:2015 Transport Canada TP14371, AGA 7.17
The PHL elevated LED lights mark the perimeter (FATO) of a heliport. The FAA recommended perimeter color is green. The ICAO recommended color is green (C array) when the FATO and TLOF are the same or white (H array) when there is a separate green TLOF inner perimeter. The purpose of the PHL’s LED floodlight is to provide light "washing" the pad surface to provide better depth perception to the pilot than simply having perimeter lights. It improves conspicuity to the pilot but does not provide uniform, illumination of the pad surface. The floodlight is engineered to be well controlled and reduce glare to the pilot. The overall height is compatible with standard height PEL's to be used together on the same perimeter. The LED floodlight should be separately circuited for control independent of the colored LED perimeter light.
See file 0MOUNTINGS for mounting details
Point Type Voltage Array Color Floodlight Mounting & Options
PHL 57005 1: 120v C: Heliport G: Green 53063
VB: Variable Brightness* 2: 220v H: ICAO Y: Yellow
PLB/PLS: Base & Gasket 6: 277v FATO W: White LSM: Low Surface Mount R: Red DH:Drain Hole in Base B: Blue MT: Marine Treatment Green NC: NVG Compatibility**
Marine Treatment in yellow is standard for protection in marine, high salt content air and other corrosive environments. Intertek ETL SEMKO Control Number: 3030033
OMBINATION PERIMETER & FLOODLIGHT PHL-57005-1C-G-53063 SHOWN WITH PL40301 BASEPLATE
* Dimming option VB does NOT apply to the floodlight which should on be a separate circuit. Use PHC 66002 with option BC for floodlight. Note: Array C brightness exceeds ICAO Annex 14 The PHL v5 C array does not exceed 2.5 watts & 5.8 VA at 120 220V in green. For ICAO FATO in white, use array H. The PHL floodlight is 32.2 watts & 34.1 VA at 120 220V ** For use with visible (non IR) array; adds IR LEDs. FLOODLIGHT DATA Intensity: 4,725 lumens Peak: 14,175 candelas LED rated average life: 100,000 hours Temperature Range: 40 to +50 deg C Frequency: 50/60 Hz Ingress Rating: IP66 & IP67
HL145 January, 2021
C
PHL Top View
Side View PHL Front View Side View
Replacement Parts & Tools
Instruction Sheet: ISPHL57005
LED Life (hours): 100,000 Height: 16.2 (411) Width: 21.5 (546)
Base Diameter: 8.0 (203)
PLB Depth: 10.0 (254) PLS Depth: 4.0 (102)
Weight: 4.0 lbs 1.8 kg Volume: 0.5 sq.ft .014 m.sq.
Note:
PSF 53063 6 T Floodlight PL10038 Pipe Extension PL10040 Breakable Coupling PL40301 Baseplate PL10049 4 6 Gasket, Baseplate
Mail: P.O. Box 686, Simsbury, CT 06070 Plant: 61 65 W Dudley Town Rd, Bloomfield, CT Tel 01 860.243.0600 USA Fax 01 860.243.0665 email: Info@PointLighting.com website: www.PointLighting.com
The PEL optical subassembly is permanently sealed. In the event of failure, the fixture must be returned to the factory for evaluation and repair.
PHL
v5 C
POINT HELIPORT LIGHTS
LED
OMBINATION PERIMETER & FLOODLIGHT
P O I N T L I G H T I N G C O R P O R A T I O N
Compliances:
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
ETL Listed to UL 844 (option EX) & UL 1598
ETL Listed to UL 1598A Marine Vessels, IP66 & IP67**
ETL Listed to CSA C22.2 No. 250.0:2008 Canada
ETL Listed to CSA C22.2 No. 137:2018 (option EX)
ETL Listed Class I, Division 2, Groups A, B, C, D, T5 (option EX)
ETL Listed Class I, Zone 2, Groups IIA & IIB+H, IIC, T5 (option EX)
Registered ISO 9001:2015
ICAO Annex 14, Volume II, Heliports, 5.3.9
American Bureau of Shipping (ABS) Type Approved Product
The PSF 5306x is a well controlled very low height LED surface mounted helipad and helideck floodlight The fixture’s beam is narrow vertically and cutoff by the visor. The horizontal beam is effective over more than 120 degrees wide The purpose of the PSF is to provide light "washing" the landing surface that provides improved conspicuity and depth perception to the pilot. There is a cable loop that exits the rear of the floodlight It may be installed as a 2 inch height light directly on the surface or trunnion mounted from greater elevation. Standard with visor, adjustable L brackets and black anodized finish.
Point Type Options
PSF 53063 6 AC only: 96 305V, 50/60 Hz & High Intensity
PSF-53062-3 DC only: 10.8 26.4V & Medium Intensity
V: Visor, 6 inch projection (required)
T: Trunnion Mount
SF: Slipfitter, Stainless Steel*
2P: Frangible Coupling, EMT* Detail H54
WW: Walkway Light, Reduced Intensity
BOL:Portable Battery Powered DC
SOL: Portable Solar Powered DC***
PSF 53062 PSF 53063
Intensity: 2,052 lumens 4,725 lumens Peak: 6,977 candelas 14,175 candelas Power: 21.3 W (DC) 32.2 W 34.1 VA (AC)
Horizontal Beam % of Peak at +/ 30 deg: 70%
Horizontal Beam % of Peak at +/ 45 deg: 35%
Horizontal Beam % of Peak at +/ 60 deg: 10%
LED rated average life: 100,000 hours
Rated color temperature: 6,500 Kelvin Temperature Range: 40 to +55 deg C Frequency: 50/60 Hz
Ingress Rating: IP66 & IP67 ** Weight: 8.0 lbs (3.6 kg)
L brackets will adjust overall height to between 2.0 & 2.6 inches. The beam angle may be adjusted vertically between +15 degrees & 15 degrees.
All external hardware is grade 316 (A4) stainless steel.
Metal castings are copper free (< 0.2%) heat treated aluminum.
PLS: Base & Baseplate Detail H58 with option T
PLS: Base & Baseplate Detail H74 without T
JBS: Junction Box, Surface* Detail H59
JBP: Junction Box, Parapet*
JB: External Junction Box Details H70 & H71
JBX: External Junction Box Class I, Div 2
EX: Class I, Division 2 (Zone 2) PSF 53063 only
RF: Wireless switching by handheld device^
PSF 53063 6 HIGH INTENSITY ^ For PSF BOL battery light only * Requires option T ** PSF 53063 is IP67; both are IP66 *** PSF 53062 3 with wireless ON OFF operation
53063 6 T PLS per Detail H58
1
HL208 September, 2022
PSF
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
PSF 53063 6 BRIGHTNESS CONTROL WITH 3 STEPS
PSF 53063 is compatible with Point Lighting brightness control technology. Brightness control requires the use of a PHC 66002 lighting system controller with option BC. The brightness is adjustable in three steps which are configurable on site This floodlight brightness control is separate from perimeter light option VB 3 step brightness control.
PSF 5306x Standard with adjustable “L” brackets for floor mounting. The floodlight may be tilted a maximum of 15 degrees up or down.
PSF 53063 6 T HIGH INTENSITY WITH TRUNNION 4 holes Top View Front View 1.96” 21.5” 25.5”
24 0”
PSF 53062 3 BOL Battery Powered Portable Surface Floodlight
Two (2) hours total run time 7,000 candelas Rechargeable AGM battery Optional wireless operation ( RF) Carrying handle May be staked or weighted in place Made in USA
2
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE WITH CARRYING CASE
PSF C093 PORTABLE WIRELESS SURFACE FLOODLIGHT SET
PSF C093 includes battery, mounting plate, AC charging cable, wireless antenna, handheld wireless operator and strong permanent carrying and storage case with wheels.
Sold as a set of two (2) floodlights PSF 53062 3 C093 RF with carrying case and the above accessories. The wireless device operates at 918 MHz. The estimated runtime on full charge is over nine (9) hours.
PSF 53062 3 C093 RF
Battery Powered Portable Surface Floodlight
PSF C093
Set of two (2) floodlights with all required accessories & wheeled carrying case
3
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE OR FIXED SOLAR POWERED
PSF 53062 3 SOL C094A V FOR
WIRELESS SWITCHING
This solar powered LED surface floodlight is a full brightness 4,800 candelas flood with wireless ON OFF operation to a maximum run time of two (2) hours per night based on 20 deg C ambient Run time is reduced in cold weather.
May be screwed in place. Includes visor ( V).
Optional foot plate ( FP) for staking or weighting with sandbags or blocks.
Adjustable tilt angle.
Onboard wireless signal receiver & antenna for ON OFF operation
Wireless activation with handheld device PL11572 TRANS ( C 094A) or key fob included with C094.
Note: PL11572 TRANS must be ordered separately one per site for any C094A system.
Tested and certified to ingress protection IP66.
PSF 53062 3 SOL C094A V
Solar Powered Surface Floodlight For Wireless Operation
PSF 53062 3 SOL C086 V FOR ALL NIGHT OPERATION
This version has a low profile, larger array and battery that allows the floodlight to operate all night automatically without manual switching at any site with an insolation value of 2.0 kWh/m2/day or higher.
PSF 53062 3 SOL C086 V
Solar Powered Surface Floodlight
Operates All Night Automatically
4
5 POINT SURFACE FLOODLIGHT PSF LED HELIPORT LOW PROFILE FLOODLIGHT EXTERNAL JUNCTION BOXES Option JBX Class I, Division 2 External Junction Box for use with PSF 53063 6 EX see drawing 803358 Option JB Safe Area External Junction Box for use with PSF 53063 6 & PSF 53062 see drawing 803357 Typical Mounting PSF External Junction Box Standard with two 1 inch NPT feed thru hubs
POINT SURFACE FLOODLIGHT
PSF LED HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
Note: These details are compiled in the pdf file 0MOUNTINGS and are available in CAD upon request.
6
Compliances:
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
ETL Listed to UL 844 (option EX) & UL 1598
ETL Listed to UL 1598A Marine Vessels, IP66 & IP67**
ETL Listed to CSA C22.2 No. 250.0:2008 Canada
ETL Listed to CSA C22.2 No. 137:2018 (option EX)
ETL Listed Class I, Division 2, Groups A, B, C, D, T5 (option EX)
ETL Listed Class I, Zone 2, Groups IIA & IIB+H, IIC, T5 (option EX)
Registered ISO 9001:2015
ICAO Annex 14, Volume II, Heliports, 5.3.9
American Bureau of Shipping (ABS) Type Approved Product
The PSF 5306x is a well controlled very low height LED surface mounted helipad and helideck floodlight The fixture’s beam is narrow vertically and cutoff by the visor. The horizontal beam is effective over more than 120 degrees wide The purpose of the PSF is to provide light "washing" the landing surface that provides improved conspicuity and depth perception to the pilot. There is a cable loop that exits the rear of the floodlight It may be installed as a 2 inch height light directly on the surface or trunnion mounted from greater elevation. Standard with visor, adjustable L brackets and black anodized finish.
Point Type Options
PSF 53063 6 AC only: 96 305V, 50/60 Hz & High Intensity
PSF-53062-3 DC only: 10.8 26.4V & Medium Intensity
V: Visor, 6 inch projection (required)
T: Trunnion Mount
SF: Slipfitter, Stainless Steel*
2P: Frangible Coupling, EMT* Detail H54
WW: Walkway Light, Reduced Intensity
BOL:Portable Battery Powered DC
SOL: Portable Solar Powered DC***
PSF 53062 PSF 53063
Intensity: 2,052 lumens 4,725 lumens Peak: 6,977 candelas 14,175 candelas Power: 21.3 W (DC) 32.2 W 34.1 VA (AC)
Horizontal Beam % of Peak at +/ 30 deg: 70%
Horizontal Beam % of Peak at +/ 45 deg: 35%
Horizontal Beam % of Peak at +/ 60 deg: 10%
LED rated average life: 100,000 hours
Rated color temperature: 6,500 Kelvin Temperature Range: 40 to +55 deg C Frequency: 50/60 Hz
Ingress Rating: IP66 & IP67 ** Weight: 8.0 lbs (3.6 kg)
L brackets will adjust overall height to between 2.0 & 2.6 inches. The beam angle may be adjusted vertically between +15 degrees & 15 degrees.
All external hardware is grade 316 (A4) stainless steel.
Metal castings are copper free (< 0.2%) heat treated aluminum.
PLS: Base & Baseplate Detail H58 with option T
PLS: Base & Baseplate Detail H74 without T
JBS: Junction Box, Surface* Detail H59
JBP: Junction Box, Parapet*
JB: External Junction Box Details H70 & H71
JBX: External Junction Box Class I, Div 2
EX: Class I, Division 2 (Zone 2) PSF 53063 only
RF: Wireless switching by handheld device^
PSF 53063 6 HIGH INTENSITY ^ For PSF BOL battery light only * Requires option T ** PSF 53063 is IP67; both are IP66 *** PSF 53062 3 with wireless ON OFF operation
53063 6 T PLS per Detail H58
1
HL208 September, 2022
PSF
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
PSF 53063 6 BRIGHTNESS CONTROL WITH 3 STEPS
PSF 53063 is compatible with Point Lighting brightness control technology. Brightness control requires the use of a PHC 66002 lighting system controller with option BC. The brightness is adjustable in three steps which are configurable on site This floodlight brightness control is separate from perimeter light option VB 3 step brightness control.
PSF 5306x Standard with adjustable “L” brackets for floor mounting. The floodlight may be tilted a maximum of 15 degrees up or down.
PSF 53063 6 T HIGH INTENSITY WITH TRUNNION 4 holes Top View Front View 1.96” 21.5” 25.5”
24 0”
PSF 53062 3 BOL Battery Powered Portable Surface Floodlight
Two (2) hours total run time 7,000 candelas Rechargeable AGM battery Optional wireless operation ( RF) Carrying handle May be staked or weighted in place Made in USA
2
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE WITH CARRYING CASE
PSF C093 PORTABLE WIRELESS SURFACE FLOODLIGHT SET
PSF C093 includes battery, mounting plate, AC charging cable, wireless antenna, handheld wireless operator and strong permanent carrying and storage case with wheels.
Sold as a set of two (2) floodlights PSF 53062 3 C093 RF with carrying case and the above accessories. The wireless device operates at 918 MHz. The estimated runtime on full charge is over nine (9) hours.
PSF 53062 3 C093 RF
Battery Powered Portable Surface Floodlight
PSF C093
Set of two (2) floodlights with all required accessories & wheeled carrying case
3
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE OR FIXED SOLAR POWERED
PSF 53062 3 SOL C094A V FOR
WIRELESS SWITCHING
This solar powered LED surface floodlight is a full brightness 4,800 candelas flood with wireless ON OFF operation to a maximum run time of two (2) hours per night based on 20 deg C ambient Run time is reduced in cold weather.
May be screwed in place. Includes visor ( V).
Optional foot plate ( FP) for staking or weighting with sandbags or blocks.
Adjustable tilt angle.
Onboard wireless signal receiver & antenna for ON OFF operation
Wireless activation with handheld device PL11572 TRANS ( C 094A) or key fob included with C094.
Note: PL11572 TRANS must be ordered separately one per site for any C094A system.
Tested and certified to ingress protection IP66.
PSF 53062 3 SOL C094A V
Solar Powered Surface Floodlight For Wireless Operation
PSF 53062 3 SOL C086 V FOR ALL NIGHT OPERATION
This version has a low profile, larger array and battery that allows the floodlight to operate all night automatically without manual switching at any site with an insolation value of 2.0 kWh/m2/day or higher.
PSF 53062 3 SOL C086 V
Solar Powered Surface Floodlight
Operates All Night Automatically
4
5 POINT SURFACE FLOODLIGHT PSF LED HELIPORT LOW PROFILE FLOODLIGHT EXTERNAL JUNCTION BOXES Option JBX Class I, Division 2 External Junction Box for use with PSF 53063 6 EX see drawing 803358 Option JB Safe Area External Junction Box for use with PSF 53063 6 & PSF 53062 see drawing 803357 Typical Mounting PSF External Junction Box Standard with two 1 inch NPT feed thru hubs
POINT SURFACE FLOODLIGHT
PSF LED HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
Note: These details are compiled in the pdf file 0MOUNTINGS and are available in CAD upon request.
6
Compliances:
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
ETL Listed to UL 844 (option EX) & UL 1598
ETL Listed to UL 1598A Marine Vessels, IP66 & IP67**
ETL Listed to CSA C22.2 No. 250.0:2008 Canada
ETL Listed to CSA C22.2 No. 137:2018 (option EX)
ETL Listed Class I, Division 2, Groups A, B, C, D, T5 (option EX)
ETL Listed Class I, Zone 2, Groups IIA & IIB+H, IIC, T5 (option EX)
Registered ISO 9001:2015
ICAO Annex 14, Volume II, Heliports, 5.3.9
American Bureau of Shipping (ABS) Type Approved Product
The PSF 5306x is a well controlled very low height LED surface mounted helipad and helideck floodlight The fixture’s beam is narrow vertically and cutoff by the visor. The horizontal beam is effective over more than 120 degrees wide The purpose of the PSF is to provide light "washing" the landing surface that provides improved conspicuity and depth perception to the pilot. There is a cable loop that exits the rear of the floodlight It may be installed as a 2 inch height light directly on the surface or trunnion mounted from greater elevation. Standard with visor, adjustable L brackets and black anodized finish.
Point Type Options
PSF 53063 6 AC only: 96 305V, 50/60 Hz & High Intensity
PSF-53062-3 DC only: 10.8 26.4V & Medium Intensity
V: Visor, 6 inch projection (required)
T: Trunnion Mount
SF: Slipfitter, Stainless Steel*
2P: Frangible Coupling, EMT* Detail H54
WW: Walkway Light, Reduced Intensity
BOL:Portable Battery Powered DC
SOL: Portable Solar Powered DC***
PSF 53062 PSF 53063
Intensity: 2,052 lumens 4,725 lumens Peak: 6,977 candelas 14,175 candelas Power: 21.3 W (DC) 32.2 W 34.1 VA (AC)
Horizontal Beam % of Peak at +/ 30 deg: 70%
Horizontal Beam % of Peak at +/ 45 deg: 35%
Horizontal Beam % of Peak at +/ 60 deg: 10%
LED rated average life: 100,000 hours
Rated color temperature: 6,500 Kelvin Temperature Range: 40 to +55 deg C Frequency: 50/60 Hz
Ingress Rating: IP66 & IP67 ** Weight: 8.0 lbs (3.6 kg)
L brackets will adjust overall height to between 2.0 & 2.6 inches. The beam angle may be adjusted vertically between +15 degrees & 15 degrees.
All external hardware is grade 316 (A4) stainless steel.
Metal castings are copper free (< 0.2%) heat treated aluminum.
PLS: Base & Baseplate Detail H58 with option T
PLS: Base & Baseplate Detail H74 without T
JBS: Junction Box, Surface* Detail H59
JBP: Junction Box, Parapet*
JB: External Junction Box Details H70 & H71
JBX: External Junction Box Class I, Div 2
EX: Class I, Division 2 (Zone 2) PSF 53063 only
RF: Wireless switching by handheld device^
PSF 53063 6 HIGH INTENSITY ^ For PSF BOL battery light only * Requires option T ** PSF 53063 is IP67; both are IP66 *** PSF 53062 3 with wireless ON OFF operation
53063 6 T PLS per Detail H58
1
HL208 September, 2022
PSF
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
PSF 53063 6 BRIGHTNESS CONTROL WITH 3 STEPS
PSF 53063 is compatible with Point Lighting brightness control technology. Brightness control requires the use of a PHC 66002 lighting system controller with option BC. The brightness is adjustable in three steps which are configurable on site This floodlight brightness control is separate from perimeter light option VB 3 step brightness control.
PSF 5306x Standard with adjustable “L” brackets for floor mounting. The floodlight may be tilted a maximum of 15 degrees up or down.
PSF 53063 6 T HIGH INTENSITY WITH TRUNNION 4 holes Top View Front View 1.96” 21.5” 25.5”
24 0”
PSF 53062 3 BOL Battery Powered Portable Surface Floodlight
Two (2) hours total run time 7,000 candelas Rechargeable AGM battery Optional wireless operation ( RF) Carrying handle May be staked or weighted in place Made in USA
2
POINT SURFACE FLOODLIGHT PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE WITH CARRYING CASE
PSF C093 PORTABLE WIRELESS SURFACE FLOODLIGHT SET
PSF C093 includes battery, mounting plate, AC charging cable, wireless antenna, handheld wireless operator and strong permanent carrying and storage case with wheels.
Sold as a set of two (2) floodlights PSF 53062 3 C093 RF with carrying case and the above accessories. The wireless device operates at 918 MHz. The estimated runtime on full charge is over nine (9) hours.
PSF 53062 3 C093 RF
Battery Powered Portable Surface Floodlight
PSF C093
Set of two (2) floodlights with all required accessories & wheeled carrying case
3
POINT SURFACE FLOODLIGHT
PSF LED
HELIPORT LOW PROFILE FLOODLIGHT PORTABLE OR FIXED SOLAR POWERED
PSF 53062 3 SOL C094A V FOR
WIRELESS SWITCHING
This solar powered LED surface floodlight is a full brightness 4,800 candelas flood with wireless ON OFF operation to a maximum run time of two (2) hours per night based on 20 deg C ambient Run time is reduced in cold weather.
May be screwed in place. Includes visor ( V).
Optional foot plate ( FP) for staking or weighting with sandbags or blocks.
Adjustable tilt angle.
Onboard wireless signal receiver & antenna for ON OFF operation
Wireless activation with handheld device PL11572 TRANS ( C 094A) or key fob included with C094.
Note: PL11572 TRANS must be ordered separately one per site for any C094A system.
Tested and certified to ingress protection IP66.
PSF 53062 3 SOL C094A V
Solar Powered Surface Floodlight For Wireless Operation
PSF 53062 3 SOL C086 V FOR ALL NIGHT OPERATION
This version has a low profile, larger array and battery that allows the floodlight to operate all night automatically without manual switching at any site with an insolation value of 2.0 kWh/m2/day or higher.
PSF 53062 3 SOL C086 V
Solar Powered Surface Floodlight
Operates All Night Automatically
4
5 POINT SURFACE FLOODLIGHT PSF LED HELIPORT LOW PROFILE FLOODLIGHT EXTERNAL JUNCTION BOXES Option JBX Class I, Division 2 External Junction Box for use with PSF 53063 6 EX see drawing 803358 Option JB Safe Area External Junction Box for use with PSF 53063 6 & PSF 53062 see drawing 803357 Typical Mounting PSF External Junction Box Standard with two 1 inch NPT feed thru hubs
POINT SURFACE FLOODLIGHT
PSF LED HELIPORT LOW PROFILE FLOODLIGHT SAFE AREA & HAZARDOUS AREA
Note: These details are compiled in the pdf file 0MOUNTINGS and are available in CAD upon request.
6
Compliances:
PSF-AX
MARINE HELIDECK FLOODLIGHT ATEX ZONES 1 & 2 IECEX
IECEx Listed Ex d IIB T6 Gb Ta 55 to +55 deg C IP66
ATEX Listed II 2 G Ex d IIB T6 Gb Ta 55 to +55 deg C IP66
Registered ISO 9001:2015 ICAO Annex 14, Volume II UK CAA CAP 437, Chapter 3, paragraph 3.5
American Bureau of Shipping (ABS) Type Approved Product ABS Green Passport per MEPC179 (59) International Maritime Organization (IMO) MODU Code 2001, para 13.5
The PSF 53017 AX is a zones 1 & 2 medium intensity LED surface mounted helipad and helideck floodlight intended to "wash" the pad with light. The purpose of the PSF AX is to provide cones of light "washing" the surface that provides improved conspicuity and depth perception to the pilot.
Point Type Voltage AX Rear Entries (2)
PSF 53017
1: 120 volts AX: ATEX & (blank): ¾ inch NPT
2: 220 240 volts IECEx 10: 1 inch NPT
4: 12 24 volts DC Zone 1 M20: Metric Zone 2 M25: Metric
Marine Treatment of the cover and black anodizing of the body are included: Thefixtureshallbetreatedformarineconditionsby cleaning per US Department of Defense TTC490 method III, pretreated with chromefree aluminum conversion coating per US MILC5541 type II, epoxy powder base coat primer and glossypolyesterpowdercoatfinishincolorRAL6003(FEDSTD 595 color #14097) dark green. Powder coating per US DepartmentofDefenseMILPRF24712AtypeVIandovencured.
Listed: Baseefa14ATEX0274
IECEx BAS 14.0130
Peak (per beam): 4,000 candelas
Total output per fixture: 8,000 candelas
LED rated average life: 100,000 hours
T number: T6 (85 deg C)
T ambient: +55 deg C
Operating: 55 deg C to +55 deg C
Frequency: 50/60 Hz
Ingress Rating: IP66
All external hardware is grade 316 (A4) stainless steel. Metal castings are copper free (< 0.2%) heat treated aluminum.
Note: Cover hardware tool PL10839 PSFAX is required for all new installations.
SNP: Safety Net Plate^
^ Includes SS mounting hardware for PSF only.
PSF 53017 2 AX HL203 February, 2022
POINT SURFACE
FLOODLIGHT
POINT SURFACE FLOODLIGHT PSF-AX MARINE HELIDECK FLOODLIGHT ATEX ZONES 1 & 2 IECEX TYPICAL INSTALLATION PHOTOMETRY PLOTS FOR A 22 D VALUE OCTAGONAL HELIDECK Photometry software generated plots the average across the surface of the octagon
Plot A: Sixteen (16) PSF Surface Floodlights produces 31 lux average Plot B: Eight (8) PSF Surface Floodlights produces 11.76 lux average PLOT A PLOT B
P
SURFACE
LOODLIGHT
Replacement Parts
1 Lamp
watts
2 Lamp
watts
3 Lamp
watts
3 Lamp
watts
1 Socket &
1 DC Socket &
25 ** Cover
14 SS**
PSFAX*
Kit
Instruction Sheet: IS53017 AX Weight: 48 lbs 22 kg Dimensions: 12.0 D 15.5 W 6.6 H (305)
Bolt Pattern: Four
holes for
16 screws Arranged on flanges spaced 4.5 x 16.5 inches Important Notes: * Required for new installations ** No substitute by certification Quantity 20 per fixture P O I N T L I G H T I N G C O R P O R A T I O N
CT
OINT
F
PSF-AX MARINE HELIDECK FLOODLIGHT ATEX ZONES 1 & 2 IECEX The two (2) flood lamps are positioned with the beam centerlines 30 degrees apart.
PL11003
LED 120v, 12.5
PL11003
LED 230v, 9.5
PL11056
LED 12/24v DC, 9
PL11006
LED 12/24v DC, 9
PL10737
Bracket AC Assembly (2) PL10737
Bracket DC Assembly (2) PL 11107
Bolts 316SS (20) PL10235
Washer Flat 316SS (20) PL10839
Torque Wrench
PSF 53017 AX Rear View PSF 53017 AX Top View
(394) (167)
(4)
3/8
Mail: P.O. Box 686, Simsbury,
06070 Plant: 61 65 W. Dudley Town Rd, Bloomfield, CT Tel 01 860.243.0600 USA Fax 01 860.243.0665 email: Info@PointLighting.com website: www.PointLighting.com
FLOODLIGHT POLE ASSEMBLY
POINT HELIPORT FLOODLIGHT PHF LED HELIPORT
Heliport Area Floodlight Assembly with Pole
The PHF 53001 is a medium intensity AC powered pole mounted floodlight assembly that aids in the general illumination of the helipad landing area enhancing the pilot's visual depth perception. Each of the two LED floodlights has an angle adjustment. The pole is round tapered satin finish aluminum with hand hole, internal vibration damper and mast arm with fixture brackets.
The overall height is less than 10 ft (3 meters) and the anchor bolts are included. The floodlights are black anodized finished and a visor option is available Includes a POL red LED FAA L 810 single obstruction light.
Point Type Voltage Options
Overall Height: 9.25 ft
PHF 53001 1: 96 250v AC V: Visors (2) Anchor Bolts Included 6: 277v AC DB: Double POL Obstruction Light Included Vibration Damper Included Mast Arm Width: 5.75 ft
Per each LED floodlight:
Intensity: 4,725 lumens Peak: 14,175 candelas Power: 32.2 watts
Max Bolt Circle: 8.25 inches
Min Bolt Circle: 6.5 inches Base Square: 8.75 inches
Intensity: 14,175 candelas per floodlight 4,725 lumens per floodlight
Power (per floodlight): 32.2 watts 34.1 VA
Total Power: 66.4 watts 70 2 VA
LED rated average life: 100,000 hours
Temperature Range: 40 to +55 deg C
Frequency: 50/60 Hz
Ingress Rating: IP66 & IP67
PHF 53001 1
HL210 September, 2020
POLE BASE INSTALLATION DETAIL
POINT HELIDECK SEARCHLIGHT
HSL LED HELIDECK WORK AREA ILLUMINATION
Compliances: ETL Listed to UL 50E, UL 844 & UL 1598
ETL Listed to UL 1598A Marine Vessels, IP66 ETL Listed to CSA C22.2 No. 137 M1981 & No. 250.0 08 Canada
Registered ISO 9001:2015
ICAO Annex 14, Volume II
The PSF 53062 is a well controlled and directed LED helideck surface searchlight. The light’s beam is manually adjustable to illuminate a specific work area on the helideck surface and surrounding areas The purpose of the PSF is to direct additional light so tasks may be performed efficiently.
Point Type Voltage Version
PSF 53062 1: AC: 96 264V, 50/60 Hz HSL: Helideck Searchlight 3: DC: 10.8 26.4V
PSF 53062 1 HSL
Intensity: 3,076 lumens Peak: 10,458 candelas
AC Power: 37.2W 37.8VA DC Power: 21.3W
LED rated average life: 100,000 hours
Temperature Range: 40 to +50 deg C Frequency: 50/60 Hz Ingress Rating: IP66 Weight: 8.0 lbs (3.6 kg)
The installed overall height may be adjusted between 1 ft & 5 ft by changing the length of the 2 inch EMT pipe used
The vertical beam angle may be adjusted between +30 degrees & 60 degrees by loosening two thumb screws.
The horizontal rotation of the beam may be adjusted within a 150 degrees range by loosening the thumb screws on the stainless steel slipfitter.
All external hardware is grade 316 (A4) stainless steel.
Metal castings are copper free (< 0.2%) heat treated aluminum.
HL 2.2 5 August, 2018