Arc
Why Superior Glove
Protection workers want to wear
Workers shouldn’t have to choose between comfort and safety. We innovate to fit the protection they need into comfortable safety gloves and other PPE they’ll want to wear.
North American innovation
We research, design, and test our products at our Canadian headquarters to ensure safety, effectiveness, and quality.
Injury reduction resources
We offer free educational resources and training services to help companies develop safety programs that eliminate and reduce injuries.
What you need to know about arc flash protection
We design arc flash protection that maximizes comfort and range of motion without compromising safety against flash fire and high voltage flashover. We also offer complementary PPE including sleeves, shirts, pants, coveralls, base layers, and head gear.
Arc flash ratings explained
Arc flash protection levels on our products are represented by the following icons, along with the corresponding minimum calorie rating:
ENDURA®
378GKGVB | XS - 3XL
Multi-hazard protection with liquid and water resistance for heavy machine operation and maintenance
Our Endura® 378GKGVB goatskin gloves provide multi-hazard protection for heavy machine operation and maintenance, where resistance to liquids is a must. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 33 cal / cm², offer ANSI 5 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance. Treated to resist water and liquids, they feature impact protection against knocks and bumps and padded palms for comfort when material handling.
WARNING: Known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65warnings.ca.gov
https://www.superiorglove.com/products/endura-378gkg4p
https://www.superiorglove.com/products/endura-378gobkvb
https://www.superiorglove.com/products/endura-378gobkl
https://www.superiorglove.com/products/endura-378gkge
https://www.superiorglove.com/products/endura-378gktfg
ENDURA®
378GKG4P | S - 3XL
Multi-hazard FR protection with flexible maximum impact-resistant bumpers for hand movement plus cut and liquid protection
ENDURA®
378GOBKVB | S - 3XL
Arc flash-rated multi-hazard protection with unpadded palms for a wider range of movement plus liquid resistance
ENDURA®
378GOBKL | XS - 3XL
Arc flash-rated for non-energized work plus cut protection and liquid resistance
ENDURA®
378GKGE | S - 3XL
Economic choice for arc flash protection with cut resistance
ENDURA®
378GKTFG | XS - 3XL
Durable arc flash-rated gloves with high cut protection for longer wear life
https://www.superiorglove.com/products/endura-378gobtkl
https://www.superiorglove.com/products/endura-399gkgl5
https://www.superiorglove.com/products/endura-399gkgl5l
ENDURA®
378GOBTKL | S - 3XL
Cold-rated arc flash protection with cut resistance and liquid resistance
ENDURA®
399GKGL5 | S - 3XL
All-round fabrication and MIG welding gloves with arc flash protection
ENDURA®
399GKGL5L | XS - M
Slim-fit gloves for MIG welding and all-round fabrication with arc flash protection
Quick glove recommendations
This onsite program provides quick PPE selection and teamwide glove trials
Expert onsite glove recommendations
Completed in as little as 1-2 visits
Free teamwide samples for glove trial
Visit superiorglove.com/GSA to get started
String Knit
https://www.superiorglove.com/products/dexterity-s18kgdne
https://www.superiorglove.com/products/dexterity-s13frne
https://www.superiorglove.com/products/dexterity-skg-pxne/
DEXTERITY®
S18KGDNE | 5 - 11
Arc flash protection with touchscreen compatibility plus additional wrist cut protection to guard against sharp edges
DEXTERITY®
S13FRNE | 5 - 11
Arc flash-rated cut protection for better dexterity plus neoprene palm coating for grip
DEXTERITY®
SKG/PXNE | 6 - 11
Arc flash-rated cold protection for dexterous flash fire resistance plus cut and heat protection
Safety Sleeves & Apparel
https://www.superiorglove.com/products/contender-pxn-kg18
https://www.superiorglove.com/products/supera-fr240st
https://www.superiorglove.com/products/supera-fr180st
https://www.superiorglove.com/products/supera-fr310pth
CONTENDER™
PXN/KG18 | S/M - L/XL
Arc flash and cut-resistant sleeves for workers exposed to fire and arc flash hazards 18”, tapered cut
SUPERA™
FR240ST | S - 5XL
FR vented shirt with stretch that protects against flash fire and arc flash
SUPERA™ FR180ST | S - 5XL
Inherent FR vented shirt that protects against flash fire and arc flash
SUPERA™ FR310PTH / FR310PT
Heavy-duty FR pants with flash fire and arc flash protection
Available hemmed [FR310PTH] and unhemmed [FR310PT]
Regular | (28, 30, 32, 34, 36, 38, 40, 42, 44, 46) x 32
Tall | (34, 36, 38, 40, 42, 44, 46) x 36
https://www.superiorglove.com/products/supera-fr240pt
https://www.superiorglove.com/products/supera-fr180pt
https://www.superiorglove.com/products/supera-fr240co
https://www.superiorglove.com/products/supera-fr180co
SUPERA™ FR240PT
FR breathable pants with stretch that protects against flash fire and arc flash
Regular | (28, 30, 32, 34, 36, 38, 40, 42, 44, 46) x 32
Tall | (34, 36, 38, 40, 42, 44, 46) x 36
SUPERA™ FR180PT
Ultra lightweight FR pants with inherent flash fire and arc flash protection
Regular | (28, 30, 32, 34, 36, 38, 40, 42, 44, 46) x 32
Tall | (34, 36, 38, 40, 42, 44, 46) x 36
SUPERA™ FR240CO / FR240CON
Hi-viz vented FR coveralls with stretch that protects against flash fire and arc flash
Available with reflective tape [FR240CO] and without [FR240CON]
Regular | (36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60) x 30
Tall | (36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60) x 32
SUPERA™ FR180CO
Ultra lightweight FR coveralls with inherent dual flash fire and arc flash protection
Regular | (36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60) x 30
Tall | (36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60) x 32
https://www.superiorglove.com/products/supera-tskvfr
https://www.superiorglove.com/products/supera-ljkvfr
https://www.superiorglove.com/products/supera-fr-bakvfr/
SUPERA™ TSKVFR | S - 3XL
Inherent FR underlayer shirt with flash fire and arc flash protection
SUPERA™ LJKVFR | S - 3XL
Inherent FR long johns with flash fire and arc flash protection
SUPERA™ BAKVFR | ONE SIZE
Non-irritating fire-resistant balaclava for protection against fire hazards
https://www.superiorglove.com/products/supera-fr-wckvfr/
https://www.superiorglove.com/products/supera-fr-bnkvfr/
https://www.superiorglove.com/products/supera-fr-nwkvfr/
https://www.superiorglove.com/products/supera-dckvfr/
https://www.superiorglove.com/products/supera-h26lpg
SUPERA™ WCKVFR | ONE SIZE
Non-irritating fire-resistant watch cap for protection against fire hazards
SUPERA™ BNKVFR | ONE SIZE
Fire-resistant watch cap that is ultra soft for use with hard hats and headwear
SUPERA™ NWKVFR | ONE SIZE
Non-irritating fire-resistant neck warmer for protection against fire hazards
SUPERA™ DCKVFR | ONE SIZE
Fire-resistant neck gaiter with bib that is ultra soft and non-irritating for all day comfort
SUPERA™ H26LPG | S - 3XL
Inherently FR henley shirt with flash fire and arc flash protection
Sizing Guides
Shirts / Jackets
Measure the widest part of the chest - approximately 1-3 inches (3-10cm) below the armpits. Allow for 2 finger width space between chest and measuring tape for a more comfortable fit.
Use this measurement to select the corresponding garment size. If measurement is between sizes, select the larger size.
S 34-36 inches / 80-90 cm
M 38-40 inches / 91-101 cm
L 42-44 inches / 102-112 cm
XL 46-48 inches / 113-125 cm
Pants
Measure the area around the waist. Allow for 2 finger width space between waist and measuring tape for a more comfortable fit.
Use this measurement to select the corresponding garment size. If measurement is between sizes, select the larger size.
S 30-32 inches / 71-78 cm
M 34-36 inches / 81-91 cm
L 38 inches / 91-100 cm
XL 40 inches / 91-100 cm
Inseam Lengths
Regular: 32 inches / 81 cm | Tall: 36 inches / 92 cm
Coveralls
Measure the widest part of the chest - approximately 1-3 inches (3-10cm) below the armpits. Allow for 2 finger width space between chest and measuring tape for a more comfortable fit.
Use this measurement to select the corresponding garment size. If measurement is between sizes, select the larger size.
S 38 inches / 96-100 cm
M 40-42 inches / 100-110 cm
L 44-46 inches / 110-120 cm
XL 48-50 inches / 120-130 cm
Inseam Lengths
inches /
cm 3XL 56-58 inches / 141-151 cm 4XL 60-62 inches / 151-161 cm
Regular: 30 inches / 76 cm | Tall: 32 inches / 81 cm
Gloves
A proper fit is extremely important. An uncomfortable fit causes hand fatigue and ultimately could lead to a potential workplace hazard. Measure the width of your hand 1 inch below the base of your first finger and across your knuckles.
5 / 2XS 2.75 inches / 68 mm
6 / XS 3 inches / 76 mm
7 / S 3.25 inches / 84 mm
8 / M 3.75 inches / 94 mm
9 / L 4 inches / 105 mm
Sleeves
To find the best fit, measure the circumference of your bicep and choose the corresponding sleeve size according to the chart below.
2XS 9.75 inches / 250 mm
XS 10.25 inches / 260 mm
S 10.5 inches / 270 mm
Sleeves are available in multiple lengths.
For a more natural fit, some sleeves come in a tapered version which provide better comfort. Tapered sleeves are designed to fit the contours of your arm and won’t lose shape due to stretching (Tapered) (Tubular)
Quick Fit Tips
A good fit is important for comfort and protection. Our measurements offer a starting point, but personal preference is key.
Clothing should fit comfortably without excessive bunching when moving. It shouldn’t be too loose or too tight as that can affect the safety performance.
ANSI & ASTM Standards
Cut Resistance
Nuisance Cut Hazards
200 – 499 grams to cut Paper cuts, parts assembly
Low Cut Hazards
500 – 1,499 grams to cut General purpose, shipping & handling, masonry
Impact Resistance
Moderate Cut Hazards
1,500 – 2,199 grams to cut
Low-gauge metal handling, assembly, installation (drywalling, electrical maintenance, HVAC)
High Cut Hazards
2,200 – 3,999 grams to cut
Mid-gauge metal handling, stamped metal handling, recycling & sorting, blade sharpening & handling, well drilling, oil refinery maintenance, glass handling
Heat Resistance
Extreme Cut Hazards
4,000 – 6,000+ grams to cut
High-gauge metal & stamped parts handling, stainless steel manufacturing, butchering, blade maintenance & sharpening (pneumatic blades), industrial pipe fitting, steel cable handling, food processing & butchering, glass pane handling, bottling
Each level is the maximum temperature where workers have up to 15 seconds before they receive second-degree burns
Puncture Resistance - Hypodermic
ASTM F2878
Hypodermic puncture protection
Puncture Resistance - Probe
EN 388:2016
Probe puncture protection
2N of Puncture
4N of Puncture
6N of Puncture
8N of Puncture
Needles, fine wood splinters, tiny pieces of glass, barbs on wires, thin gauge wire, construction staples
Abrasion Resistance
10N of Puncture
10N of Puncture
20N of Puncture
60N of Puncture
Nails, thick cables, wood splinters, and wires
of Puncture
About Recommendations
These recommendations are of a general nature and are not specific to everyone’s needs. Always ensure your selected gloves comply with the mandated safety standard recommended for your application.
Cleaning Instructions
Acrylic Wash in cold water (85°F / 30°C) | Tumble dry low heat | Safe to bleach
Chemical Rinse in water and mild detergent | Reverse to dry inner liner
Cotton Wash in cold water (85°F / 30°C) | Tumble dry low heat | Safe to bleach
Leather Dry-clean | Do not bleach
MetaActiv™ Wash in hot water (170°F / 75°C) | Tumble dry high heat | Do not bleach
Nylon
Wash in warm water (105°F / 40°C) | Tumble dry low heat | Safe to bleach
ParaActiv™ Wash in hot water (170°F / 75°C) | Tumble dry high heat | Do not bleach
Polyester Wash in warm water (105°F / 40°C) | Tumble dry low heat | Safe to bleach
TenActiv™ Wash in cold water (85°F / 30°C) | Tumble dry low heat | Safe to bleach
Wool
Mixed materials
Palm coated
Wash in warm water (105°F / 40°C) | Tumble dry low heat | Safe to bleach
For safety gloves with mixed materials, give preference and accommodate for the following:
Do not use high heat with thermoplastic materials like HPPE, nylon, and polyester
Do not use bleach or high heat on gloves with hypodermic puncture protection
Dry clean gloves with leather
Disregard palm coating | Follow the cleaning instructions for other materials the glove contains