Northeast #24, 2010

Published Nationally

®

Northeast Edition

$3.00

November 24 2010 Vol. XLVIII • No. 24

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.ConstructionEquipmentGuide.com

Inside

Ramps Meet the ‘Grade’at I-80 Brookville

By Jennifer Rupp

CEG CORRESPONDENT

Vital Philly Bridge Opens Ahead of Schedule…8

Pizzagalli Squeezes Into a Tight Spot…14

One of the prominent stops along I-80 in Pennsylvania is Brookville, exit 78.

The town was built in the 1800s, thriving in the lumber industry with the aid of many streams and connections to larger rivers. Lumber mills were built along the watersheds and logs were floated to markets in Pittsburgh.

Lumber and manufacturing still support the town today, but visitors also come to see the Victorian architecture of the Brookville Historic District, the Hazen Flea Market and the Jefferson County Fair.

The Pennsylvania Department of Transportation (PennDOT) and HRI Inc. have been hard at work, rehabilitating the I-80/SR 36 Brookville Interchange to provide longer, smoother exit ramps for Brookville travelers. The project includes new concrete shoulders, ramp realignment and construction of acceleration and deceleration lanes. The contract also covers minor bridge rehabilitation, drainage and the construction of a noise barrier wall — all performed by prime contractor HRI Inc. of State College, Pa. Subcontractor Dixon Electric, based in Claysburg, Pa is installing new traffic signals where the ramps intersect SR 36. see BROOKVILLE page 16

JCB Launches Next Gen Skid Steers, CTLs…24

Table of Contents ........4 Paving Section ......50-63 Motorgraders Section .... ..............................67-71 Parts Section ....104-105 Auction Section 112-128 Business Calendar....114 Advertisers Index ....126

HRI used a Caterpillar D8 dozer and a Caterpillar 330D to excavate the rock slope on the I-80 westbound off ramp.

This material was used to construct the fill benches that the westbound on-ramp and eastbound off-ramps were built on.

Caterpillar Acquires Bucyrus Inc. in $8.6 N.Y. Makes Bid for $3B Billion Transaction Marked for N.J. Tunnel

Caterpillar Inc. and Bucyrus International Inc. have entered into an agreement under which Caterpillar will acquire Bucyrus International in a transaction valued at approximately $8.6 billion (including net debt). The acquisition is based on Caterpillar’s key strategic imperative to expand its leadership in the mining equipment industry, and positions Caterpillar to capitalize on the robust long-term outlook for commodities driven by the trend of rapid growth in emerging markets which are improving infrastructure, rapidly developing urban areas and industrializing their economies.

Under the terms of the transaction, which has been approved by see CATERPILLAR page 18

TRENTON, N.J. (AP) New York is seeking the $3 billion that the federal government had committed to the Hudson River rail tunnel that New Jersey Gov. Chris Christie scrapped.

The Record newspaper reported that U.S. Sen. Kirsten Gillibrand of New York has asked Transportation Secretary Ray LaHood to redirect the money to the Long Island Rail Road’s East Side Access Project and the construction of the Second Avenue subway line.

Transportation officials in New Jersey are examining how to redirect as much as $1 billion in federal highway funding that had been pledged for the tunnel.

LaHood has said New Jersey will be required to repay up to $350 million.

Christie cited cost overruns when he killed the project in October.

Page 2 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.ransome.com 1-877-RANSOME

RENTED 2007 Cat 938G II Stk#: UP20074, S/N: CRD02494, 2307 hours, cab, air, GP bucket, forks, limited slip differential, QC, ride control $135,000

1998 CAT 990, S/N: 4FR00308, Stk #: UP20035, CAT Certified Powertrain Rebuild $CALL

BACKHOE LOADER

CLICK HERE www.ransome.com to view our LARGE fleet of used inventory.

2006 CAT 420EIT, S/N: KMW00157, Stk#: UP20087 CAB, AC, SOLD $72,500 MP BKT, Forks, 24"Rear BKT, Ride Control ........S

CRAWLER LOADER 2006 CAT 953C, S/N: BBX02600, Stk #: UT10083, 3577 hours, cab, air, GP bucket, serviced every 250 hours ..............$$79,000 2006 CAT 953C, S/N: BBX02603, Stk #: 96098, 1,004 hours, cab, air, GP bucket, like new machine, U/C about 90%....$$CALL

EXCAVATOR - CRAWLER 2006 CAT 311C, S/N: CKE01779, Stk#: UP20115, 359 hours, $93,300 CAB, AC, Aux Hyd, Hydraulic thumb. ............................$ 2004 CAT 314CLCR, S/N: PCA00476, Stk#: UP20117, 2815 hours, CAB, AC, Long Stick, Aux Hydraulics, Quick Coupler ......

SOLD $79,300 ............................................................................S 2007 CAT 314CLCR, S/N: PCA01482, Stk#: UP20111, 2955 hours, CAB, AC, 9'10" stick, Combined Function hydraulics ...... ......................................................................................$$93,300 2006 CAT 325CLCR, S/N: BKW00418, Stk#: UP20100, 3602 hours, CAB, AC, 10'6" stick, Quick Coupler, Med Press. Lines ..

RENTED $150,000 . ....................................................................R 2007 CAT 328DLCR, S/N: GTN00133, Stk#: UP20110, 1645 hours, CAB, AC, Quick Coupler, Aux Hydraulics ........................

RENTED $229,000 ......................................................................R 2007 CAT 328DLCR, S/N: GTN00237, Stk#: UP20077, 3008 hours, CAB, AC, Quick Coupler, Long U/C, Aux Hydraulics ........

RENTED $229,000 ......................................................................R 2007 CAT 328DLCR, S/N: GTN00128, Stk#: UP20098, 2760 hours CAB, AC, 10'6" stick, 34" pads ..........................$$229,000 2006 CAT 303.5C CR, S/N: DMY00553, Stk #: UT10044, 698 hours, cab, air, long stick 5'10", blade, rubber pads, hammer lines ................................................................................SOLD 2006 CAT 325CLCR, S/N: BKW00403, Stk#: UT10173, CAB, HP Lines, MP Lines, Quick Coupler, 10'6" stick, Front Window Guard ..........................................................................$$175,000 2003 CAT 345BL, S/N: AGS01717, Stk #92774, 4941 hrs, 100,000#, 11' stick, 36" pads, 60" bkt, pin grabber ....$$165,000

2007 CAT D6RXL VPAT, S/N: HKE00241, Stk#: UP20103, CAB, AC, VPAT, Multi-Shank Ripper, 24" Tracks $249,300

OFF-HIGHWAY TRUCK 2005 CAT 735, S/N: AWR00825, Stk #92704, 3738 hrs, cab, air, liners, 23.5 R 0 25 XADN Tires at about 50 % ......$$269,000 2004 CAT 735, S/N: AWR00715, Stk #92703, 4035 hours, cab, AC, liners ....................................................................$$249,000 2006 CAT 740, S/N: B1P01012, Stk#: UP20075, Tourque Converter, Retarder, 29.5 XAD Tires ............................$$299,000 2006 CAT 740, S/N: B1P01461, Stk#: UX30002, 3675 hrs, RENTED $305,000 Liner, Steel Bed, Tailgate, CAB, AC................R

DOZER - CRAWLER

SCRAPER

2005 CAT D6R XL II, S/N: AAX01075, Stk #: 92811, 4551 hours, AC, SU Blade, New UC, New Injectors, New Equalizer Bar, Ripper Valve ........................................................$$139,000 2007 CAT D6R XL-VPAT, S/N: HKE00241, Stk#: UP20103, 1412 hrs, CAB, AC, Blade PAT, MS Ripper, Sys 1, Wired for Trimble ........................................................................$$229,000 2004 CAT D6RIIXL, S/N: AAX00874, Stk #: UP20086, 2601 Hrs, Cab, A/C, 6SU-Blade, 24” Track, Wired/Plumbed for Trimble GPS ................................................................$$145,000 2006 CAT D6RIIILGP, S/N: WRG00624, Stk#: UP20088, CAB, AC, Additional Ctwt, 6S-LGP Blade, 3395 hours ........$$229,000 2004 CAT D8R II, S/N: 6YZ01580, Stk #: 92739, 4413 hrs, cab, air, 3rd valve, SS ripper ..............................................$$339,000

(2) 1998 CAT 627F, S/N:1DL00490, Stk#92736 & S/N:1DL00477, Stk #92735, 10,000+/- hours, cab, A/C, push RENTED $CALL pull, big tires, good cond ..................................R

WHEEL LOADER 2005 CAT 928GZ, S/N: DJD001847, Stk #: UP20034, 2900 Hrs, Cab, A/C, GP Bkt, 82% Life Remaining on Tires ........................

SOLD $79,300 ............................................................................S 2007 CAT 938G II, Stk#: UP20074, S/N: CRD02494, 2307 hours, RENTED $135,000 cab, air, GP bucket, forks, QC, ride control ..R 2006 CAT 950GII, S/N BAA01037, Stk# UP20079, 6525 hrs, CAB, AC, Ride Ctrl, 3rd Valve, GP Bucket, Auto Shift, CTWT .... ....................................................................................$$135,000 2007 CAT 950H, S/N K5K00929, Stk# UP20078, 3319 hrs, CAB, RENTED $189,000 AC, Forks, GP BKT, Auto Shift, CTWT ..........R

Used Equipment Manager:

Domestic & Intl Sales:

215-245-3729

215-245-2749

Joe Villa

Intl. & Domestic Used Equip. Sales & Purchasing:

Grason Jones 215-245-3711

Asst. UEM

Tom Rosser

Used Equipment Sales & Support:

George Caroulis 215-244-3866

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 3

South Jersey Branch: 201 North Route 73 Winslow Township, NJ 08095

Corporate Headquarters: 2820 Hamilton Blvd South Plainfield, NJ 07080

USED EQUIPMENT FOR SALE Contact: Jim Casendino 800-562-0012 jcasendino@bindermachinery.com

ASPHALT / PAVING / CONCRETE EQUIPMENT

2001 KOMATSU PC400 LC-6, S/N A84212, 1,138 HRS, 36” TRACKS; 11’1” ARM; A/C; JRB SLIDE-LOC; NEW LINK ASSY. HR METER INSTALLED AT 7,160 HRS; TRAMAC V56 HAMMER ..................................................................................................$150,000 2004 KOMATSU PC400 LC-7L, S/N A86203, 3,283 HRS, 36” TRACKS; 11’1” ARM; A/C; JRB SLIDE-LOC; ESCO 60” BUCKET ........................................................$195,000 2005 KOMATSU PC400 LC-7L, S/N A86361, 6,521 HRS, 36” TRACKS; 11’1” ARM W/PIPING; HKX HYD CONTROL UNIT; A/C; ESCO 54” BUCKET ......................$175,000

CRANE - CRAWLER/DRAGLINE

2005 KOMATSU HM300-1, S/N 1312, 2,390 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; BODY HEATER; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM .. ........................................................................................................................$235,000 2005 KOMATSU HM300-1, S/N 1310, 2,610 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; BODY HEATER; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYSTEM .. ........................................................................................................................$235,000 2005 KOMATSU HM300-1, S/N 1208, 2,267 HRS, GOODYEAR 23.5 RL-2 TIRES; A/C; BODY HEATER; RETARDER; LINCOLN AUTO LUBE SYSTEM; TAILGATE ........$235,000 2005 KOMATSU HM300-1, S/N 1177, 2,761 HRS, GOODYEAR 23.5 RL-2 TIRES; A/C; BODY HEATER; RETARDER; LINCOLN AUTO LUBE SYSTEM; TAILGATE ........$235,000 2005 KOMATSU HM300-1, S/N 1174, 3,563 HRS, BRIDGESTONE 23.5 X R25 TIRES; A/C; AUTO-LUBE SYSTEM; BODY HEATER; TAILGATE; QUALCOM SYS ........$205,000 2005 KOMATSU HM350-1, S/N 1081, 2,447 HRS, BRIDGESTONE 26.5 X 25 RADIAL TIRES; BODY HEATER; AUTO LUBE SYSTEM INSTALLED; QUALCOMM SYSTEM. TAILGATE ................................................................................................................$259,700 2005 KOMATSU HM400-1, S/N A10022, 2,808 HRS, MICHELIN 26.5 X 25 RADIAL TIRES; BODY HEATER; A/C; LINCOLN AUTO LUBE SYSTEM; TAILGATE. QUALCOM SYSTEM ..........................................................................................................$275,000 2005 KOMATSU HM400-1, S/N 1230, 2,619 HRS, BRIDGESTONE 29.5 X 25 RADIAL TIRES; A/C; LINCOLN AUTO LUBE SYSTEM; TAILGATE; QUALCOM SYS ......$295,000

2009 VOGELE 5200-2, S/N 07740061, 2 HRS, CUMMINS 240HP TIER 3 DIESEL ENG; CARLSON EZIV-1019 SCREED #12010709; POWER TUNNELS; NIVELTRONIC PLUS SONIC DUAL GRADE/SLOPE; OSC. PUSH ROLLERS; HYD FRONT APRON; AUTO LUBE SYS; HYD SCREED LOCK; TRACK PLOW ........................................................$365,000 1996 WIRTGEN 2100DC, S/N 3.21.259, 327 HRS, 79” DRUM W/ HT3 TOOTH HOLDERS; MERCEDES 600 HP DIESEL ENGINE; DUAL GRADE & SLOPE CONTROLS. COMPLETE REBUILD ..................................................................PRICE REDUCED $275,000 2009 KOBELCO CK1600 II, S/N GN03-02327, 8 HRS, 200’ BOOM, KOBELCO LMI PIPING; FREEFALL WINCHES; 3RD DRUM AUX SHEAVE; 19-TON MC KISSICK BALL HOOK; 75-TON 4 SHEAVE MC KISSICK HOOK BLOCK ................................$1,196,000

CRAWLER DOZERS

2006 KOMATSU WA380-6

2005 KOMATSU D31PX-21A, S/N 50683, 654 HRS, 24" TRACKS; KOMSTAT II; 10'6" BLADE; OPEN ROPS; ROPS HEATER ................................................................$55,000 2006 KOMATSU D31PX-21A, S/N 51070, 481 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$60,000 2006 KOMATSU D31PX-21A, S/N 51021, 309 HRS, 24” TRACKS; KOMSTAT II; 10’6” BLADE; OPEN ROPS; ROPS HEATER ................................................................$55,000 2006 KOMATSU D37EX-21A S/N 5721, 586 HRS, 16" TRACKS; KOMSTAT II; 9' BLADE; OPEN ROPS; ROPS HEATER ..............................................................................$57,500 2006 KOMATSU D39EX-21A, S/N 1941, 815 HRS, KOMSTAT II; 20" TRACKS; 9' BLADE; ENCLOSED CAB WITH A/C....................................................................$75,000 2007 KOMATSU D61EX-15E0, S/N B45024, 702 HRS, TIER 3 ENGINE; KOMTRAX 2+; 24” TRACKS; 6-WAY BLADE; ENCLOSED CAB WITH HEA-DEF-A/C; NEW OEM PAINT JOB ..................................................................................................................$160,000 2005 KOMATSU D61PX-15, S/N B40114, 784 HRS, 34” TRACKS; 6-WAY BLADE; ENCLOSED CAB W/ HEA-DEF-A/C; 100% CERT. REBUILD AT 3,965 HRS ......$130,000 2005 KOMATSU D65PX-15, S/N 67683, 5,126 HRS, 36” AR TRACKS; POWER PITCH & TILT BLADE; ENCLOSED CAB W/ HEA-DEF-A/C; NEW CHAINS AND SPROCKETS @ 4806 HRS ........................................................................................................$135,000

S/N 65029, 2,065 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER #805-164167-1/3 & Q/D 4 CY G/P BUCKET #B10949 ........................................$150,100

CRAWLER EXCAVATORS

2009 KOMATSU WA380-6 S/N A53444, 239 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; NO 3RD VALVE; ADDED CWT; A/C; LSD AXLES; KAC PIN-ON G/P 4.3 CY BUCKET W/BOCE #5155 ......................................$205,000

2009 VOGELE 5200-2 S/N 07740061, 2 HRS, CUMMINS 240HP TIER 3 DIESEL ENG; CARLSON EZIV-1019 SCREED #12010709; POWER TUNNELS; NIVELTRONIC PLUS SONIC DUAL GRADE/SLOPE; OSC. PUSH ROLLERS; HYD FRONT APRON; AUTO LUBE SYS; HYD SCREED LOCK; TRACK PLOW ............$365,000

2008 KOMATSU PC138US LC-8, S/N 23696, 2,132 HRS, TIER 3 ENGINE; KOMTRAX 3; 28” TRIPLE GROUSER TRACK SHOES; 8’2” ARM; 6’8” DOZER BLADE; CHOICE OF BUCKET SIZE ..................................................................................................$115,000 2000 KOMATSU PC228US LC-2, S/N 15317, 10,935 HRS, 32” TRACKS; 9’6” ARM; A/C; PARTIAL ENGINE REBUILD; FRONT END REPINNED & BUSHED; NEW HYD PUMP. CYLINDERS REBUILT; NEW UC; HKX HAMMER KIT W/ AUTO-LUBE ....$95,000 2003 KOMATSU PC228US LC-3, S/N 21657, 7,428 HRS, 32” TRACKS; 9’6” ARM W/PIPING; HYD CONTROL UNIT; ACTIVE MOD A/C; WAIN-ROY RIGID COUPLER. WAIN-ROY 36” BUCKET ....................................................................................$65,000 2007 KOMATSU PC228US LC-3E0, S/N 40209, 4,098 HRS, TIER 3 ENGINE; KOMTRAX 2+; 32” TRACKS; 9’6” ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC; PATTERN CHANGE VALVE; ESCO 30” BUCKET ................................................................$125,000 1999 KOMATSU PC270 LC-6, S/N A83064, 7,475 HRS, 24" TRACKS; 10' HD ARM W/ PIPING; HYD CONTROL UNIT; ESCO 48" DIPPER; SERVICED & PAINTED........$68,500 2005 KOMATSU PC270 LC-7L, S/N A86254, 2,123 HRS, 32” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC; AUTO-LUBE SYSTEM FOR TRAMAC HAMMERS; ESCO 48" BUCKET................................................................................$137,500 2007 KOMATSU PC270 LC-8, S/N A87090, 2,684 HRS, TIER 3 ENGINE; KOMTRAX 3; 32” TRACKS; A/C; PATTERN CHANGE VALVE; YOUNG 60’ LONG FRONT; 60” BUCKET ........................................................................................................................$225,000 2006 KOMATSU PC308US LC-3, S/N 20340, 3,227 HRS, 34” TRACKS; 10’ ARM; HYD CONTROL UNIT; A/C; JRB SLIDE-LOC; ESCO 30” BUCKET ............................$179,200 2006 KOMATSU PC308US LC-3, S/N 20357, 3,062 HRS, 34” TRACKS; 10’ ARM; A/C; JRB SLIDE-LOC; HKX HAMMER KIT; AUTOLUBE SYSTEM; HENSLEY 30” BUCKET ...... ........................................................................................................................$185,000 2000 KOMATSU PC400 LC-6, S/N A84122, 12,038 HRS, 36” TRACKS; 13’2” ARM; A/C; NEW MAIN CONTROL VALVE; ESCO 42” BUCKET ....................................$88,900 2001 KOMATSU PC400 LC-6, S/N A85043, 16 HRS, 36” TRACKS, ACTIVE MODE, A/C, 11’1” ARM, GEITH 36” BUCKET, COMPLETE CERTIFIED REBUILD ................$175,000

OFF-HIGHWAY TRUCKS

2007 KOMATSU SK1020-5N S/N A70456; 149 HRS; TURBO ENGINE; SUPER-FLOW; CAB W/ A/C; CONTROL CHANGE; 12 X 16.5 TIRES; ADD'L CWT.; 74" LONG LIP BUCKET .................. $33,000

SKID STEERS

2007 ASV POSI-TRACK SR70, S/N SSB00558, 447 HRS, 15” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB; A/C; HEATER; HYD QUICK COUPLER; 67” BKT ....$45,000 2007 ASV POSI-TRACK SR70, S/N SSB00557, 239 HRS, 15” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; HYDRAULIC QUICK COUPLER; 67” BUCKET. 8” JRB SNOW PUSHER; ASV BUCKET................................................$48,200 2007 ASV POSI-TRACK SR80, S/N SEB00957, 330 HRS, 20” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; 72” BUCKET..............................................................................................................$47,500 2009 ASV PT30, S/N PTA03860, 77 HRS, 11” RUBBER TRACKS; OPEN ROPS; BACKUP ALARM; UNIVERSAL MOUNT ADAPTER (LOOSE); 48” 0.25CY QDGP BUCKET ...... ..........................................................................................................................$25,000 2009 ASV PT70, S/N PTH00667, 45 HRS, 15” RUBBER TRACKS; ENCLOSED CAB; A/C; HEATER; WIPER KIT: BACK-UP ALARM; HYDRAULIC QUICK COUPLER. 74” BUCKET W/ RUBBER EDGE ..............................................................................$55,000 2009 ASV PT80, S/N PTI01318, 21 HRS, 20” RUBBER TRACKS; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; HYDRAULIC QUICK COUPLER. 72” BUCKET..............................................................................................................$60,000 2009 ASV PT80, S/N PTI01319, 9 HRS, 20” RUBBER TRACKS; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; HYDRAULIC QUICK COUPLER. 72” BUCKET..............................................................................................................$60,000 2008 KOMATSU SK820-5N, S/N A40203, 125 HRS, TURBO ENGINE; STD FLOW; 10.00X16.5 65” STD TIRES REAR LIGHT; ADDED CWT; PATTERN CHANGE VALVE; AUX HYD OVER-RIDE CONTROL; OPEN ROPS W/HEAT; 68” LONG LIP BKT W/BOCE .. ..........................................................................................................................$25,000

ATTACHMENTS FOR SALE Contact: Gerry Yarka 800-562-0012 gyarka@bindermachinery.com

LABOUNTY HDR100QC GRAPPLE ......$27,300

ESCO PC250 36”

JRB KB3926C11 S/N H50175, GP BUCKET, FITS A KOMATSU WA653, QDGP 1.18 CY W/ CUTTING EDGE ......$1,250

S/N A40203, 125 HRS, TURBO ENGINE; STD FLOW; 10.00X16.5 65” STD TIRES REAR LIGHT; ADDED CWT; PATTERN CHANGE VALVE; AUX HYD OVER-RIDE CONTROL; OPEN ROPS W/HEAT; 68” LONG LIP BKT W/BOCE ..............................................................................$25,000

WHEEL LOADERS

2005 KOMATSU WA380-5L, S/N A52668, 5,228 HRS, MICHELIN 23.5XR25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER & S/D BUCKET; QD FORKS, NEW PAINT ......................................................................................................$125,000 2006 KOMATSU WA380-6, S/N A53081, 2,010 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER. JRB Q/D 4 CY G/P BUCKET; NEW OEM PAINT ................................................$182,000 2006 KOMATSU WA380-6, S/N 65029, 2,065 HRS, TIER 3 ENGINE; KOMTRAX 2; MICHELIN 23.5 X R25 XHAT TIRES; 3RD VALVE; ADDED CWT; A/C; JRB COUPLER. Q/D 4 CY G/P BUCKET ....................................................................................$150,100

#RH92942, 1.43 CY ............................$7,800

2008 KOMATSU SK820-5N

www.bindermachinery.com

2007 ASV POSI-TRACK SR80 S/N SEB00957, 330 HRS, 20” RUBBER TRACKS; MP1 PACKAGE; ENCLOSED CAB W/HEATER & A/C; WIPER KIT; BACK UP ALARM; 72” BUCKET ....................$47,500

Page 4 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTHEAST EDITION Circulated Throughout

IN THIS ISSUE 67

SPECIAL SECTION… MOTORGRADERS

Be sure to check out this special section!

Keep up to date with the latest information on motorgraders.

Founder, Publisher & CEO

Edwin M. McKeon Sr.

Vice President Emeritus Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office

FEATURES…

8 14

67

8

18 24 38

14

120 24

102 108 114 118

SOUTH STREET BRIDGE REOPENS ONE MONTH AHEAD OF SCHEDULE

The $67 million reconstruction project began on Dec. 8, 2008, and opened one month ahead of the anticipated 24-month schedule. The new 1,800-ft.

(548.6 m) long bridge and viaduct reopened to traffic during the evening of Nov. 6.

LINK-BELT CRANE HELPS VT.’S PIZZAGALLI INTO A TIGHT SPOT

Some projects require a little bit extra. Extra knowledge, extra skill, extra attention. It’s for that very reason that Pizzagalli Construction Company created its “Special Projects Division.”

TECHNICIANS, FINISHERS ATTEND KING OF PRUSSIA EQUIPMENT SERVICE SEMINAR

On Nov. 6, King of Prussia Equipment hosted a one-day service seminar with MQ-Whiteman, a manufacturing company of concrete construction equipment.

JCB LAUNCHES NEW GENERATION SKID STEERS, COMPACT TRACK LOADERS

These “New Generation” machines are the first to not only be manufactured but also designed and engineered at the company’s North American headquarters in Savannah, Ga.

TRANSPORTATION LEADERS RELEASE STATEMENT ON DEFICIT PROPOSAL

Toll Free Fax Web site Editorial e-mail Advertising e-mail

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Edwin M. McKeon Jr. • New Jersey • Eastern Pennsylvania 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com

For advertising rates: Contact

Lou Reardon • North, Western & Central Pennsylvania • Delaware • Maryland • Northern Virginia 717/829-1259 Toll Free 888/211-5711 Fax 717/540-8184 e-mail lreardon@cegltd.com

Contact

Kent Hogeboom • New York • New England 315/823-7668 Toll Free 800/988-1203 Fax 315/823-4136 e-mail khogeboom@cegltd.com

Contact

Leaders from a diverse coalition of transportation interests applaud the draft proposal released [Nov. 10] by the National Commission on Fiscal Responsibility and Reform co-chairs to increase the gas tax by 15 cents to support vital transportation infrastructure improvements.

Ed Bryden • West Virginia 440/268-9690 Toll Free 800/810-7640 Fax 440/268-9691 e-mail ebryden@cegltd.com

RITCHIE BROS. SELLS MORE THAN 800 LOTS IN PITTSBURGH

Contact

Ritchie Bros. Auctioneers sold more than 800 lots — including 23 crawler tractors and 22 hydraulic excavators — at its Pittsburgh, Pa., auction held Nov. 11.

CONSTRUCTION CROSSWORD CLASSIFIEDS BUSINESS CALENDAR COMING AUCTIONS

EQUIPMENT… 120

• New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

84 CATERPILLAR 259B3 Compact Track Loader 102 TOPCON QS Robotic Total Station Series 124 EARTH & TURF Clamp-on Forks

Contact

Rachel Slavid • New England 508/755-1585 Toll Free 800/225-8448 Fax 508/755-1584 e-mail rslavid@cegltd.com

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2010, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 5

PENN JERSEY MACHINERY CALL FOR DETAILS ON THE FOLLOWING MACHINES!

FOR SALE OR RENT! Volvo COMPACT – Built to Perform. Built to Last.

EQUIP. GROUP

MODEL #

DEALER ID # YEAR

LOCATION SELL PRICE

Comp. Whl Ldr.

L20B

365403

2008

St. Island

$52,900

Comp. Excav.

EC30

301389

2004

Deptford

$29,500

Skidsteer

MC80B

70102

2008

Lionville

$23,600

Skidsteer

MC110B

70048

2008

Lionville

$20,250

Skidsteer

MC90B

303889

2006

Lionville

$19,250

MODEL # DEALER ID # AIR COMPRESSORS P185WIR 370744 XP185WJD 390509 P185WIR 395271 P185WIR 398347 HP375WIR 407338 XP375WIR 370052 XP825WCU 398904 HP1600WCU IQ 377778

SERIAL ID #

YEAR

HRS

LOCATION

PRICE

368714 370055 373425 370056 371032

LOCATION

SELL PRICE

2006 2007 2008 2008 2009 2008 2008 2007

350 185 690 485 315 600 550 1700

Somerville Somerville Somerville Somerville Somerville Somerville Somerville Somerville

$10,900 $10,900 $10,900 $11,500 $33,500 $26,500 $55,900 $110,000

On All Ingersoll Rand Compressors

Ready to Work! For Sale Or Rent!

MODEL #

SERIAL ID #

YEAR

HRS

LOCATION

PRICE

2008 2007 2008 2008 2008

1570 2990 3 358 480

Somerville, NJ Somerville, NJ Somerville, NJ Somerville, NJ Somerville, NJ

$15,750 $23,000 $43,500 $41,500 $68,000

GENERATORS

LIGHT TOWERS Light Tower Light Tower Light Tower Light Tower Light Tower

HOURS

0% for 12 MONTHS

INGERSOLL RAND Generators & Light Towers MODEL #

YEAR

2006 2006 2006 2006 2006

4300 2955 1495 1375 1150

Somerville, NJ Somerville, NJ Somerville, NJ Somerville, NJ Somerville, NJ

$3,700 $5,500 $5,900 $5,900 $6,250

G40 G125 G145 G185 G290

2001 Volvo A40D, 11,800 Hours, s/n 60044 Sell Price $95,000

400077 384097 399745 397684 397687

2005 PF5510, s/n 0184444, 2639 hours, Equipped with: Omni 3E electric screed Topcon grade and slope, Sonic feed $195,000

2006 L220E s/n V4094, 5710 hours, Equipped with: • 82167-Engine Block Heater 120V, 1500W • 80885/80943-Work Lights Front/Rear, Extra • 82108-Automatic Lubrication System, Std. • 80055-134 7.0YD3 P/O STE GP Bucket • 80115-134 3PC. Bolt-On-Edge, STE Buckets $231,500 Deptford

CHECK OUR WEBSITE www.pennjerseymachinery.com OR CALL 908-218-1919 FOR OUR COMPLETE INVENTORY!

PENN JERSEY NEW LOCATION

Staten Island - S I PJM Branch Store 331 Edward Curry Ave • Staten Island, NY 10314 (718) 889-0105 • Fax: (718) 889-0107 Call Salesman Bob Watt at (516) 330-7873 for all your equipment needs.

Lionville Branch 120 Gordon Rd Lionville, PA 19341 (610) 363-9200

Somerville Branch 61 County Line Rd Somerville, NJ 08876 (908) 218-1919

Deptford Branch 1330 Hurfville Rd Deptford, NJ 08096 (856) 227-6400

Page 6 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ELLIOTT & FRANTZ, INC.

2006 Cat D6N LGP, s/n ALY02282, 3907 Hrs $148,500

2003 Cat 815F, s/n BKL00456, 5767 Hrs $169,000

2006 Cat 325CL, s/n BFE02044, 2855 Hrs $162,000

1984 Cat 613B, s/n 38W07685, 1015 Hrs $19,000

2006 Cat M318C MH, s/n H2F00131, 9968 Hrs $135,000

2008 Cat CS-433E, s/n 0ASR00966, 497 Hrs $63,000

10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

1457 Oak Ridge Place Hagerstown, MD 21740 301/733-8100 Fax: 301/739-1835

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

9469 Hawkins Drive Mannassas, VA 20109 703/393-4014 Fax: 703/393-4010

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 7

631/643-2605 www.allislandequipment.com

1970 CELEBRATING OUR 40TH ANNIVERSARY 2010

TELESCOPIC HANDLERS

SKID STEER LOADERS

0% Finance 48 Months on certain m odels

ALL WHEEL STEER LOADERS

TRACK LOADERS Contact Us for Excellent Rental Rates on Our Fleet of Late Model Equipment ®

Page 8 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

South Street Bridge Reopens One Month Ahead of Schedule Mayor Michael A. Nutter joined a ribbon-cutting ceremo- is a safe and comfortable way to cross the Schuylkill.”

“The reconstruction of the bridge is the largest and most ny by Philadelphia, Pa., and federal government officials as well as community leaders Nov. 6 to celebrate a major infra- complex project in the history of the Streets Department,” structure development — the reopening of the vital South said Streets Commissioner Clarena Tolson. “We’re pleased to present this vital link between the communities of West Street Bridge The $67 million reconstruction project began on Dec. 8, Philadelphia and Center City one month ahead of schedule, 2008, and opened one month ahead of the anticipated 24- which will ultimately relieve traffic congestion and travel month schedule. The new 1,800-ft. (548.6 m) long bridge delays in the immediate vicinity.”

The South Street Bridge Coalition, a group consisting of and viaduct reopened to traffic during the evening of Nov. 6.

“We’re thrilled to deliver the new South Street bridge to Philadelphians on budget and ahead of schedule,” said Nutter. “Thanks to a collaborative effort, this crumbling structure that became a growing concern for more than a decade has been transformed into a model of a strong government-community partnership.”

Driscoll Construction, based in Spring House, Pa., the general contractor on the project, was responsible for delivering the completed bridge so quickly to Philadelphia.

More than 30,000 drivers, transit riders, bicyclists and pedestrians are expected to use the bridge each day. The (Copyright city of Philadelphia. Photograph by Kaitlin Privitera.) new bridge will feature dedicated bicycle lanes that will Mayor Michael A. Nutter (fifth from R) and other elected officials and community open the new South Street Bridge, a $67 million project completed early and be 6 ft. 4-in. (1.8 m 10 cm) leaders on-budget. wide. The sidewalks of the new bridge will be 2 ft. (.6 m) wider than the sidewalks on the old bridge. The new bridge also will feature four pedestrian look-out areas beneath the glass towers, which will be lit with LED lighting. In addition, ramp and stairway connections are being constructed so that there will be direct connections to the future extension of the Schuylkill River trail.

New pedestrian entrances will provide access to the University Regional Rail Station and the University of Pennsylvania’s Hollenback Hall.

“We have a beautiful design that will withstand the test of time,” said Deputy Mayor for Transportation and Utilities Rina Cutler.

“We have a truly complete bridge, so whether your trav- Before the South Street Bridge was opened to traffic, the public was invited to walk, el by car, bus, foot or bike, run or bike across the bridge in the hour leading up to its official opening ceremothe new South Street Bridge ny at 3 p.m. on Nov. 6.

elected officials, community leaders, business owners and civic groups, was instrumental in the design and development process. The coalition worked with the city to develop a bicycle, pedestrian and vehicle-friendly design. The architectural firm H2L2 was commissioned to be part of the design team.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Work continues on a pedestrian ramp on the south side of the bridge on the Schuylkill River’s eastern bank.

A plaque commemorating the reconstruction and building history of the South Street Bridge sits on the pedestrian sidewalk on the north side of the bridge.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 9

QUALITY USED EQUIPMENT • VALUE & PERFORMANCE ASSURED

1985 CAT 988B, S/N 50W7075, 52 Hrs, CAT Certified Power Train Rebuild, 11,420 Frame Hrs, 52 Hrs on PT ..........................$295,000

2007 CAT 963C, S/N BBD3113, 1157 Hours, AC, GP, 3V for MP Bkt or Ripper, From Dealer's Rental Fleet........................$159,000

2007 CAT 256C, S/N DWS298, 101 Hours, AC, High Flow, Hydraulic CPL, GP, From Dealer’s Rental Fleet ..................................................................$48,000

Air Compressor 2009 Sullair 1150XH, S/N: 2009012600; 26 Hrs; New Cond., Low Hrs, 900/1150 CFM Towable Air Compressor ............................................$120,000

Lift - Boom 2006 GENIE S40, S/N 10229, 1,351 Hrs, Genie S40 Self Propelled Aerial Work Platform ................................................................................................$33,000 2007 GENIE Z34/22DC, S/N 7327, 5 Hrs, Z34/22N DC Powered Boom Lift with Only 5 Hours of Use..............................................................................$25,500

Backhoe Loader 2007 CAT 416E ST, S/N: SHA3462; 219 Hours; Cab, Heat, E-stick, Flip over forks, GP/24, 90% Tires Remaining......................................................$65,000 Compaction Equipment - Smooth Drum 2010 CAT CB34, S/N: 34500346, 30 Hrs, ROPS, Water Spray System, Beacon, Coco Mats ............................................................................................$52,000 2008 CAT CS56, S/N: FCS196, Stk #:KRCS196, 200 Hrs, Cab/Air......$145,000 Compaction Equipment - Walk/Tow Behind 1999 RAMMAX RW1404, 258 Hours; 33" drum Rammax trench roller- ready to work....................................................................................................$2,500

2007 CAT 953C, S/N BBX3020, 624 Hours, AC, GP Bucket, 2 lever control. From Dealer's Rental Fleet......................................$145,000

Crawler Loader 2007 Cat 953C, S/N: BBX3020; 624 Hours; AC, GP Bucket, 2 lever control.

From Dealer’s Rental Fleet ..................................................................$145,000 2007 Cat 963C, S/N: BBD3113, 1157 Hrs, AC, GP, 3V for MP Bkt or Ripper, From Dealer’s Rental Fleet ..................................................................$159,000 Dozer - Crawler 2008 CAT D3K LGP, S/N: LLL437, 285 Hrs, OROPS, PAT, From Dealer’s Rental Fleet ......................................................................................................$79,000 2008 CAT D4K XL, S/N: MMM239, Stk #: VMMM239, 1137 Hrs, AC, PAT Blade, System One U/C ........................................................................$99,000 2007 CAT D5G XL, S/N: WGB3661; 1,015 Hrs; OROPS, Accugrade ready.

From Dealer's Rental Fleet ....................................................................$77,000 1999 CAT D6R DS XL, S/N: 5LN1935, 5,688 Hrs; Differential Steer, +90% Undercarriage remaining, 6SU blade ....................................................$85,000 2006 CAT D6R DS XL III, GJB333; Stk #: KGJB333; 2,435 Hrs; DS, AC, 6SU, 70% UC System1 ................................................................................$194,000 2000 CAT D6R LGP, S/N: 9PN1546, 8,333 Hrs, AC, DS, 6S Blade, 66% Undercarriage Remaining, One Owner, Good Maintenance ..................$85,000 2007 CAT D6T LGP, S/N: KJL451; Stk #: KKJL451; 2,997 Hrs; AC ....$225,000 Excavator - Crawler 1995 CAT 320, S/N: 9KK597, S/N: C9KK597, 15,576 Hours, No A/C, Heat, 42” Bkt, Customer Consignment, Inspection Available................................$45,000 2004 CAT 321C LCR, S/N: MCF903; 3,439 Hours ..............................$115,000 Excavator - Mini 2004 CATERPILLAR 304CR, S/N: NAD2142; 1,176 Hours, AC, QC, Aux Hyd, Blade, 36” bucket ..................................................................................$33,500

2006 CATERPILLAR M318C, S/N: H2D446; Stk #: KH2D446; 1,234 Hours ............................$195,000

Excavator - Wheel 2006 CATERPILLAR M318C, S/N: H2D446; Stk #: KH2D446; 1,234 Hours ...... ............................................................................................................$195,000 Forklift - Mast 2001 CAT GPL40, 1,591 Hrs; 9,000 lb, propane-powered....................$13,500 Forklift - Telescopic 2004 CAT TH560B, S/N: SLG445; 3,676 Hrs; Customer Consignment, Cab, AC, Stabilizers, Pallet Forks & Bucket, Sold "AS IS"..............................$49,000 2008 CAT TL943, 848 Hrs; 9,000 LB Telehandler, 43' High Reach 4WD Stabilizers..............................................................................................$73,500 2007 Genie GTH644, S/N: 10521, 928 Hrs; 6,000 LB Telescopic Forklift, 44' Reach ....................................................................................................$38,500 2007 Genie GTH844, S/N: 10501, 577 Hrs; 8,000 LB Telescopic Forklift, 44' Reach ....................................................................................................$42,500

2006 CAT 735, S/N BIN503, 2,936 Hours; A/C, From Dealer's Rental Fleet ....................$249,000

Generator Sets 2001 CAT XQ60, 10,505 Hrs, Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel ............................$15,000 2001 CAT XQ105, 5,200 Hrs; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel ............................$17,000 (2) 2000-2002 CAT XQ125, 7,265-9,120 Hrs; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel .............. ......................................................................................................$22,000 Ea. 1999 CAT XQ225, 11,400 Hrs; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel ............................$35,000 2005 CAT XQ400, 3,175 Hrs; Mobile diesel generator, self contained UL142 double wall fuel tank, dual voltage, accessory panel ............................$80,000 Lift - Scissor 2007 GENIE GS2646, S/N 85785, 73 Hrs ..............................................$6,750 2007 GENIE GS5390, S/N 44796..........................................................$47,000 Off-Highway Truck 2006 CAT 735, S/N: B1N503, 2936 Hrs, A/C, From Dealer’s Rental Fleet .......... ............................................................................................................$249,000 2006 CAT 735, S/N: B1N422, 3291 Hrs..............................................$229,000 2006 CAT 775E, S/N: BEC804, Stk #:KBEC804, 8328 Hrs ..................$510,000

2007 CAT D6T LGP, S/N: KJL451; Stk #: KKJL451; 2,997 Hours; AC ..............$225,000

Other Equipment 2007 E3000 Ground Heater, S/N 02195, 2,200 Hrs; ground heater with onan generator ..............................................................................................$45,500 (2) 2006 HX50 Ground Heaters, S/N 295, 368 ..................................$600 Ea. (2) 2006 HX100 Ground Heaters, S/N 370, 466 ............................$975-$1000 Skid Steer 2008 CAT 226B II, S/N MJH12218, 116 Hrs, Cab, Heat, Manual CPL, GP, From Dealer's Rental Fleet..............................................................................$34,000 (2) 2007 CAT 252B, S/N SCP4732, SCP3962, From Dealer's Rental Fleet ........ ..............................................................................................$39,000-$41,000 (3) 2007 CAT 256C, S/N DWS298, DWS381, DWS299, From Dealer's Rental Fleet........................................................................................$39,900-$48,000 2006 CAT 287B, S/N ZSA2982, 2205 Hrs, A/C, Door, Track Good, Bucket ........ ..............................................................................................................$26,000 (2) 2007 CAT 297C, S/N GCP261, GCP300............................$64,000-$69,000 Trencher / Boring Machine / Cable Plow 1996 TESMEC 900SLO, S/N 9173; Stk #: 9173; 2,683 Hrs; Customer Consignment, Contact Earl Harrar 908-561-8005 WXT 508 ..............$175,000 Water Equipment - Truck 2006 CAT 775E, S/N BEC795, Stk #: KBEC795, 8003 Hrs..................$510,000 Wheel Loader 2009 CAT 938H, S/N MJC407; 3,529 Hrs; AC, 3V, Fusion Cpl, GP, New Tires, From Dealer's Rental Fleet ..................................................................$179,000 2009 CAT 938H, S/N MJC109; 1,926 Hrs; AC, RC, 3V, QC, GP, Forks$208,000 2008 CAT 938H, S/N MJC84; 1,844 Hrs; AC, RC, 3V, QC, GP............$204,000 2005 CAT 950G II, S/N AXX1211, Stk #: KAXX1211, 3650 Hrs, AC, GP Bkt ...... ............................................................................................................$139,000 2005 CAT 950G II, S/N AXX1198, Stk #: KAXX1198, 3,646 Hrs, AC, GP............ ............................................................................................................$139,000 (2) 2008-2009 CAT 950H, S/N K5K2515, K5K1729 ..........$205,000-$229,000 2006 CAT 966H, S/N A6D334; Stk #: KA6D334; 4,624 Hrs; AC, GP ..$220,000 1985 CAT 988B, S/N 50W7075, 52 Hrs, CAT Certified Power Train Rebuild, 11,420 Frame Hrs, 52 Hrs on PT ........................................................$295,000

2008 CAT D4K XL, S/N MMM239, 1,137 Hrs, A/C, PAT Blade, System One Undercarriage..... ..........................................................$99,000

Used parts • Quality parts • Attachments Are you looking for a reliable source for quality used components and parts?

Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem.

Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line.

2005 CAT 950G II, S/N AXX1211, Stk #: KAXX1211, 3650 Hrs, AC, GP Bkt............$139,000

Call: 732/885-3005 Fax: 609/443-1146 jmeyer@foleyinc.com

We buy used and salvaged machinery.

Specializing in used Caterpillar® parts.

Place your parts requests on-line at www.outbackparts.com

2008 CAT D3K LGP, S/N LLL437, 285 Hours; OROPS, PAT, From Dealer's Rental Fleet ........ ..........................................................$79,000

www.foleyinc.com Call Art Vida, Used Equipment Manager 800-939-6611 • 732-885-5555 • Fax: 732-457-0551 855 Centennial Avenue, Piscataway, NJ 08855

Page 10 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PLASTERER EQUIPMENT CO., INC. Serving Contractors, Municipalities, and Industry since 1912 Special pricing good through 12/31/10 – cash or approved financing Subject to prior sale – Rental purchase not available

2006 CEC 5X12 Unit# 61696, 627 Hrs, 5x12 Track Screen-It, Track Screening Plant, Grizzly Remote............ ....................................................$$164,125

Special Sale Price ..........$140,000

2005 John Deere 160CLC, Unit# 29300, 3793 Hrs, 600MM Std. Track Shoes, Boom 5.01M 1 Pc., Arm 3.1M, 10’2” Assembly, Ether Starting Aid, Aux Lines Boom Arm ....$$65,000

2000 John Deere 160LC Crawler Excavator, Unit# 25849, 8306 Hrs, 600 MM Triple Semi-G Shoes, Aux. Lines on Boom/Arm................................................................$$34,900

2008 John Deere 313, Unit# 41460, 218 Hrs, No pkg, Tires 10x16.5 Hauler, Hyd Cir Std, 2" Seat Belt w/ shoulder strap, std foot controls, electric quick tach, backup alarm kit, cab enclosure w/ wiper kit, deluxe wire harness, heater w/ defroster kit, rear counterweight, susp. seat kit, horn, PT & Hyd secure expires 8/13/2010 or 2000 Hrs ......REDUCED $16,900

2008 John Deere 313, Unit# 41459, 66 Hrs, Tires 10x16.5 Extra-Wall, Hyd Cir Std, 2” Seat Belt w/o shldr strap, standard foot controls, backup alarm kit, horn, PT&Hyd Secure Expires 9/8/2010 or 2000 hrs........$$16,900

• Deere 30MT and 35MT ADT fleet in stock. Low hour, Models 300D & 350D. • Short term and long term competitive rental rates.

• Rental Purchase Options available and Lease packages through John Deere Credit.

• Call your local Plasterer Salesman.

LEBANON, PA

2550 E. Cumberland St. (717) 273-2616 (800) 225-4001

SELLERSVILLE, PA 3215 State Rd. (215) 258-5700 (800) 523-2209

2002 John Deere 650H, Unit# 27676, 4832 Hrs, Power-Angle-T Blade, Hydrostatic Transmission, Long Track, 105" Blade, ROPS ........................$$34,900 2003 John Deere 755C II Crawler Loader, Unit# 27756, Cab w/Heater Air Cond, Lub Tr 20” 508MM Dbl Grouser, Heavy Duty Rear Bumper, GP Bkt, CRL006, Standard Track, Hyd. Transmission .. ..........$$67,500

Bradco 11MD2 Backhoe Mounting Brackets for a John Deere 1070 Tractor, Used Very Little, Needs Paint ......................$$1,750

BETHLEHEM, PA 400 Stoke Park Rd. (610) 867-4657 (800) 587-9790

LEWISBERRY, PA 640 Lowther Rd. (717) 938-6568 (866) 787-0001

FOR QUALITY NEW AND USED JOHN DEERE EQUIPMENT, BE SURE TO VISIT OUR WEBSITE: www.plasterer.com

For additional information, please contact Leonard Leiphart at (717) 938-6568 OR Jeremy Walborn at (717) 273-2616

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 11

OUTPERFORMS ALL OTHER TRAILERS

ROGERS SPECIALIZED MODULAR

ROGERS 55 TON DROPSIDE

ROGERS 35/40 TON GENTLE RISER Rogers 35/40 Ton Gentle Riser, Loaded with Equipment ..................................................IIN STOCK

Rogers 55 Ton Dropside, Severe Service, Beautifully Built, Premium Specs ....................IIN STOCK

REFURBISHED ROGERS 50/55 TON Ta l b e rt 55 Ton, 4 Axle, 25 ft. Deck, Air Ride, 275/70R 22.5 Tires, Boom Trough Bucket Cutout, New Brakes, New Paint ..................................................$$42,900

Fontaine 50 Ton, 2003, Non-Ground Neck, 3 Axle Air Ride, 255/70R22.5 Tires, New Paint................................................................................................$$33,900

Refurbished Rogers 50/55 Ton, 24' deck, severe service outriggers, 3 axle air ride with air lift, 275/70R tires, reinforced load bearing rear wheel covers .......... ................................................................................................................$$47,500

Rogers 20 Ton XXL Long Deck Tag, 22' Deck, 6' Tail.................................... ......................................................................................................IIN STOCK

Rogers 25 Ton XXL Long Deck Tag, 8˚ Tail, Two Speed Heavy Duty Landing Gear, Tool Box ....................................................................................IIN STOCK

Rogers 55 Ton, Severe Service Specs, 20" Deck Height, Removable 4th Axle, CALL Aluminum Wheels, Strobes, Night Lights, LED Lights ................................C

ROGERS ROGERS 50/55 50/55 TON TON 16˚ Gentle Riser Deck to Rear, Load Bearing Tread Plate Wheel Covers, Air Lift 3rd Axle, Aluminum Disc Wheels, LED Lights ..........................IIN STOCK

STEPHENSON EQUIPMENT, INC. USED TRAILERS

www. st ephen s o n u s e d .c o m

Prospect Park, PA (Phila, PA) 800/220-8055 • 610/534-0700

USED EQUIPMENT

w w w. s te p h e n s o n u s e d . c o m

www.stephensonequipment.com Harrisburg, PA 800-325-6455

Lancaster, PA 877-503-4307

Wilkes-Barre, PA 866-667-6756

Pittsburgh, PA 800-692-7600

Syracuse, NY 800-368-6455

Albany, NY 518-357-2200

Page 12 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai w elcomes

Harter Equipme nt, Inc.

as our ne west New Jersey St ate Deale r!

Custom-designed – Comfort for the working man.

Extra Large Cab with Plenty of Legroom Standard, Fully-Adjustable Air Ride Seat with Heat Ride Control for Reduced Material Spill CD Player with MP3 Input Large, User-Friendly 7” Color Cluster Display Excellent Visibility – 360 Degrees USB Charging Port; 12 V Power Supply Multiple Storage Compartments / Cup Holders

Harter Equipment, Inc.

615 State Route 33 Millstone Twp, NJ 08535 1888-HARTER-1 732-446-7600 • Fax: 732-446-9255 www.harterequipment.com

NDA

Y

A

T

W

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

YU

I

Industry’s Best Total Coverage Warranty:

H

• • • • • • • •

COMFORT

R R A N

www.hyundaiamericas.com

Give them a call to set up a demo today for any of our products!

Harter Equipment has a very knowledgeable staff trained in servicing and selling our excavators and wheel loaders.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 13

Contact Dan 1-978-479-5192 15 Katrina Road • Chelmsford, MA 01824

www.cbused.com

2002 KOMATSU PC78US-6, #7599, 2800 HRS, NICE .. ........................................................................$$33,500

2006 ASV RC100, #7598, CAB, A/C, HIGH FLOW ........ ........................................................................$$29,500

1998 ASV 4520HD, #4520, OPEN, HIGH FLOW............ ..........................................................................$$9,800

2007 POWERSCREEN WARRIOR 1400T, #PW254, ONLY 675 HRS ..............................................$$125,000

2001 JOHN DEERE 120, #7595 ......................$$31,500

2002 TEREX 760, #7591, CAB, HEAT..............$$26,500

2008 VOLVO ECR145CL, #7596, EXCELLENT .............. ........................................................................$$98,000

2009 TAKEUCHI TB153FR, #TK439, 12,000 LBS, 370 HRS ................................................................$$49,000

TAKEUCHI TW65, #TK426, CAB, A/C, 1 YARD .............. ........................................................................$$63,000

KAWASAKI 90Z 5.2 YARD, #KV104, 1850 HRS, WARRANTY ..................................................$$189,500

GEHL 5640E, #GH105, CAB, A/C, PILOT CONTROLS, 98 HRS, WARRANTY ......................................$$34,000

2007 POWERSCREEN POWERTRACK 800, #PW253, 1200 HRS, CLEAN ........................................$$109,500

Page 14 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt Crane Helps Vt.’s Pizzagalli Into a Tight Spot

Chris Palmer (L), Woods CRW, discusses the project with Justin Reed, project manager, special projects division of Pizzagalli Construction.

The Link-Belt TCC750 is set up at the top of the dam.

Some projects require a little bit extra.

Extra knowledge, extra skill, extra attention. It’s for that very reason that Pizzagalli Construction Company created its “Special Projects Division.”

The special projects division of Pizzagalli focuses on niche areas such as power generation, oil and gas production, and other areas that require a high degree of expertise, and enables the company to focus on a wide range of various sized projects, which include areas like waste water treatment plants, semi-conductor plants, hospitals and schools.

In July 2010 Pizzagalli began a project to resurface the exposed 2,000 sq. ft.

(186 sq m) of a dam’s surface for the Green Mountain Power Corp. in Middlesex, Vt. This project involves the repair and resurfacing of the original dam that was built for the power corp.’s hydroelectric plant. The facility was originally constructed in 1928.

The Project The dam, which spans the Winooski River, is approximately 55 ft. (17 m) high; the length of the spillway (dam) is 280 ft. (85 m). It received a facelift with a new surfacing of shot concrete in 1980, but the forces of erosion, freezing and thawing have much of the new surface disintegrating.

Approximately 6 in. (15 cm) of old shot concrete resurfacing must be removed, plus 4 to 6 in. (10 to 15 cm) of the original structure, to make way for the new resurfacing. When completed see DAM page 96

The Link-Belt crane lowers items down to the base of the project.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 15

Albany, NY

(518) 220-9500

NEW YORK Batavia, NY

(585) 344-1931

Syracuse, NY

(315) 437-2611

Page 16 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GET YOUR PARTS AND GET BACK TO WORK Ransome Cat offers a convenient option for ordering earthmoving and industrial engine parts on-line. It’s FREE, and all you need to do is register today at www.ransome.com.

No Traffic. No Phones. No Lines. No Waiting.

- Review part schematics and part numbers through Cat’s Service Information System (SIS-Web) - Check real time parts availability - Review pricing - Examine remanufactured parts options - Select shipping options and delivery location - Save time

It’s as easy as.....Point, Click, Parts. www.ransome.com 1-877-RANSOME

SR Industries $avings of $11,620.00 Excavator 2 Sets of Assembled Track Groups (104 Grouser Pads, 2 Chains), 2 Sprockets, 2 Idlers, 18 Bottom Rollers, 4 Top Rollers,

Call your dealer for a price on a complete undercarriage.

OEM $44,270.00 SR Industries $32,650.00

Then call SR Industries, we match the warranty and a cheaper price with our Undercarriages.

& Hardware

SUPER DISCOUNTS ON ALL Undercarriages, & Rubber Tracks

www.sriparts.com 732-766-2109 art@sriparts.com

Interchange Improvement Project On Schedule to Meet July 2011 Deadline BROOKVILLE from page 1

The guide rail improvements and seeding was subcontracted to Penn Line Service Inc. of Scottdale, Pa. Protection Services Inc., headquartered in Harrisburg, is providing traffic control, and Williams & Willman Line Painting, Fenelton, Pa., is in charge of highway markings.

The $9.1 million project began in October 2009. The breakdown of the contract specifies that $7,820,000 is for the interchange itself, and $1,287,000 will be used for the sound barrier. The barrier, located a half mile east of the interchange, will guard a residential neighborhood from highway noise.

The sound wall will have a textured finish, which was chosen by the adjacent neighborhood.

“The ramps are being reconfigured to bring them up to federal standards for length,” said Dave Schaffer, PennDOT inspector-in-charge. HRI is removing 85,000 cu. yds. (71,071 cu m) of earth for the new ramps, the majority of which will be reused on the project.

The ramps require 6,600 cu. yds.

(5,518 cu m) of concrete and 11,700 tons (10,614 t) of asphalt. Crews are running one shift that lasts anywhere from eight to 15 hours a day.

HRI has been using mostly Caterpillar equipment on the job site, including two 330 trackhoes, a 325 excavator, a 950 rubber-tired loader, a D8 dozer and dual drum rollers. In addition, crews have employed a Case 580 4WD backhoe, a Dresser TD15 dozer, a Gradall, two Walden brooms, and a rented two-gang EZ concrete drill from Sander Power Equipment in Allentown, Pa., for drilling holes and placing dowels for the new roadway.

“The project is going well,” said Rick Knopick, project general superintendent of HRI. “The amount of traffic surprised me for such a small town, but we’ve worked around it.”

Knopick also mentioned that during excavation, HRI ran into some large rocks that took extra time, along with coal removal, which must meet EPA guidelines.

“Our designers knew in advance that there was coal on site,” said Schaffer.

“We had a plan in place to undercut three feet below the subgrade and remove the coal. It was then stockpiled and sold to a local coal company.”

The temporary on- and off-ramps were in place by November 2009, providing semis with smooth access to the busy TA and Flying J truckstops.

Prior to reconstruction, the I-80 on- and off-ramps at the Brookville exit were too short to meet current federal standards.

Valier Coal Company hauled the coal to its yard in Valier, Pa. The PennDOT/HRI team had a slight change of plans at the beginning of the project when it incorporated the relocation of a water and sewer line that was not in the original plan.

“We were still in the planning stage when the I-80 project was about to begin,” said Terry O’Neal, water and wastewater commissioner of Brookville Borough. “We were seeking out a new engineer who could get the lines moved in time, but instead HRI integrated the relocation into their plan and the borough reimbursed them for our portion.”

Moving the lines took approximately a month, but HRI was able to work on other tasks simultaneously so it did not set the project behind.

Except for some overnight lane restrictions during the fall of 2009 to put in temporary shoulders, both east and westbound will be open to traffic for the duration of the project. Lane shifts have moved traffic away from the work zone activities and the speed limit has been reduced to 45 mph.

“Right now, the lanes have been narrowed to 11 feet, both eastbound and westbound,” stated Schaffer. “In the spring of 2011, we’ll have to reduce it to one lane to complete the tie-in of the ramps to I-80.”

With everything on schedule, the project is expected to be complete by July 2011.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 17

Pine Bush Equipment Co, Inc. 97 Route 302 Pine Bush, NY 12566 Phone: (845) 744-2006 Call Jack (ext 232)

Holmes, NY Branch

East PBE, Inc.

Phone: (845) 744-2006 Call Jack (ext 232)

Phone: (860) 665-7470 Call Lisa (ext 232)

24 Sybil Court Holmes, NY 12531

283 Pane Road Newington, CT

www.pbeinc.com • view our entire inventory online! • www.eastpbe.com

1989 BOBCAT 743, STK # S04287C, S/N 501948791, 3627 HOURS, CALL EAST PBE! ................................................................................................$$9,900

1993 KOMATSU WA600-1, STK # W04691C, S/N A10367, 16,000 HOURS, RUNS WELL, SHEET METAL RUST, SOME LEAKS, TIRES 90%, CALL EAST PBE!....................................................................................................$$42,000

2007 YANMAR VI035-5, STK # E04286C, S/N 5151B, 211 HOURS, MINI EXCAVATOR, CALL EAST PBE! ............................................................$$28,500

2007 KOMATSU PC300LC-7 EO, STK # E02856R, S/N A89104, 2465 HOURS, 21’3” BOOM, 10’5” ARM, 28” TRIPLE GROUSER, NO BKT, CALL PINE BUSH! .. ..............................................................................................................$$175,000

2004 KOMATSU PC200LC-7, STK# E04517, S/N A86936, 2637 HOURS, 18'8" BOOM, 9'7" ARM, MULTI PATTERN CONTROL VALVE, THUMB, QUICK DISCONNECT COUPLER, CALL PINE BUSH! ........................................$$85,500

2007 KOMATSU PC160LC-7EO, STK# E02951, S/N K45064, 16’11” BOOM, 8’7” ARM, 24” GROUSER, TRK FRAME U/C, P/C VALVE, 36” BKT. W/TEETH, CALL PINE BUSH! ......................................$$85,500

EXCAVATORS 2001 CASE CX130, STK# E04289X, S/N DAC0713158, 6700 HOURS, EXCAVATOR 15'2" BOOM, 10' ARM, SHOE, 2 BAR STEEL 24", CALL PINE BUSH! ....................................................................................................$$32,500 2004 CASE CX160, STK# E04290X, S/N DAC161826, 3250 HOURS, EXCAVATOR WITH 16'11" BOOM, 8'10" ARM, SHOE, 3 BAR STEEL 24", CALL PINE BUSH! ............................................................................................$$56,200 2005 CASE CX160, STK# E04291X, S/N DAC162035, 2468 HOURS, EXCAVATOR WITH 16'11" BOOM, 8'10" ARM, SHOE, 3 BAR STEEL 24", CALL PINE BUSH! ............................................................................................$$52,000 1989 CAT EL240LC, STK# E03096X, S/N 4JF00406, EXTRA 36" ROCK BUCKET, CALL PINE BUSH! ..................................................................$$24,500 1996 CAT 312B, STK# E04616, S/N 9HR00434, CALL PINE BUSH! ....$$32,000 HITACHI EX160LC-5, STK# E04002, S/N 13KP002216, 8400 HOURS, EXCAVATOR W/CAB & STEEL TRACKS, CALL PINE BUSH! ................$$24,900 2002 KOMATSU PC120-6, STK# E04519, S/N 65601, 2903 HOURS, 15'1" BOOM, THUMB, BLADE, CALL PINE BUSH!..........................................$$42,000 1997 KOMATSU PC160LC-7E, STK# E02951, S/N K45064, 900 HRS, 16’11” BOOM, 24” GROUSER, TRACE FRAME U/C, PATTERN CHANGE VALVE, 36” BUCKET W/TEETH, CALL PINE BUSH! ..................................................$$85,500 2004 KOMATSU PC160LC-7, STK# E04518, S/N K40241, 4096 HOURS, 16'11" BOOM, 8'7" ARM, PATTERN CHANGE VALVE, THUMB, 36" BUCKET, CALL PINE BUSH! ..................................................................................$$66,500 2001 KOMATSU PC200LC-6, STK# E04585X, S/N A85311, 3503 HOURS, CALL PINE BUSH! ..................................................................................$$65,000 2004 KOMATSU PC200LC-7, STK# E04517, S/N A86936, 2637 HOURS, 18'8" BOOM, 9'7" ARM, MULTI PATTERN CONTROL VALVE, THUMB, QUICK DISCONNECT COUPLER, CALL PINE BUSH! ........................................$$85,500

1996 KOMATSU PC300LC-6LC, STK# E04586X, S/N A80425, 7234 HRS, CALL PINE BUSH! ..................................................................................$$72,000 2007 KOMATSU PC300LC-7, STK# E01326C, S/N A86681, A/C, 2333 HRS, 33" PADS, 42" ESCO BUCKET, H.D. FRAME GUARD W/CATWALK, CALL EAST PBE! ....................................................................................RREDUCED $144,000 YANMAR B50, STK# E04347, S/N 00356, MINI EXCAVATOR W/STEEL TRACKS, CALL PINE BUSH! ..................................................................$$14,500 MINI EXCAVATORS 2007 KUBOTA KX080, STK# E03884, S/N 11142, 451 HOURS, STEEL TRACK EXCAVATOR, CAB, A/C, DOZER BLADE, CALL PINE BUSH! ................$$69,900 2008 KUBOTA KX161-3, STK # E04727, S/N 70220, CAB, AIR CONDITIONING, RUBBER TRACKS, ANGLE DOZER BLADE, QUICK COUPLER, THUMB, 24" & 36" BUCKETS, CALL PINE BUSH! ................................$$36,500 2007 KUBOTA KX161-3R4AS, STK # E04728, S/N 32591, 1740 HOURS, CAB, A/C, RUBBER TRACKS, ANGLE DOZER BLADE, QUICK COUPLER, HYD. THUMB, 12", 24" & 36" BUCKETS, CALL PINE BUSH! ..........................$$32,500 LOADER BACKHOES 1994 CASE 590, STK # B04737X, S/N JJG0207835, 4 WD, CAB, EXTENDAHOE, FRONT AUX. HYD., 24" BUCKET, CALL PINE BUSH! ....$$23,500 2001 CATERPILLAR 430D, STK# B04520, S/N JBNK01106, 2816 HOURS, CALL PINE BUSH! ..................................................................................$$36,000 DEERE 410D, STK# B04623, S/N 378605, BACKHOE LOADER, STANDARD HOE, OPEN ROPS, 2WD, CALL PINE BUSH! ..........................................$$8,500 2007 KUBOTA B26, STK# B03235, S/N # 50324, 347 HOURS, LOADER BACKHOE W/HYD. THUMB, 3RD AUX. HYDRAULICS, 18” AND 66” BUCKETS, FRONT AND REAR WORKLIGHTS, FLIP PADS, CALL PINE BUSH! ......$$25,900 PAVER 2006 MAULDIN 1550C PAVER, STK# P04107C, S/N 701-F550TJH842-01701, 1137 HOURS, CALL EAST PBE! ............................................................$$39,000

CRAWLER DOZERS AGGREGATE EQUIPMENT 2003 CASE 850K, STK# D03536, S/N JJG0296716, NARROW GAUGE DOZER, 2004 FINTEC 540, STK# C04307, S/N 2004540218, 2800 HRS, SCREENING 104” BLADE, CAB W/HEAT, A/C, CAB REAR SCREEN, CALL PINE BUSH!.......... PLANT, 3 PRODUCTS WITH GRIZZLY, CALL PINE BUSH! ....................$$69,000 ..............................................................................................RREDUCED $49,000 SCREEN USA TROM 406, STK# C04629X, TROMMEL, CALL PINE BUSH! ......

1987 CAT D6H, STK# D04592X, 2831 HOURS, CALL PINE BUSH! ....$$39,000 ................................................................................................................$$14,000 OFF-HIGHWAY TRUCK 2006 KOMATSU D37EX-21A, STK# D04631X, S/N 5775, 970 HOURS, CAB, AIR CONDITIONING, RADIO, VERY CLEAN, CALL PINE BUSH! ..........$$50,000 1996 MOXY MT30X, STK# H04588X, S/N 353574, CALL PINE BUSH!$39,000 2007 KOMATSU D51EX-22, STK# D04696, S/N B10159, 10’ ANGLE BLADE, 2002 MOXY MT31, STK# H02673X, 3400 HRS, HAUL TRUCK WITH TAIL ROOT RAKE, 20” GROUSER, CAB, A/C, HEAT, CALL PINE BUSH! ....$$105,000 GATE, CALL PINE BUSH! ......................................................................$$99,000 SKID STEERS KOMATSU D85E-17, STK# D04590X, S/N 26682, 5298 HRS CALL PINE BUSH! ....................................................................................................$$45,000 2004 CASE 60XT, STK# S04122, S/N JAF369165, 1332 HOURS, SKID STEER, CAB, HI FLOW, CALL PINE BUSH! ........................................................$$15,000 ROLLERS 1999 CASE 1845C, STK# S04128, S/N JAF0040954, 3320 HOURS, CALL 2007 BOMAG BW177D-40, STK# R2423C, 3 HOURS, 66” DRUM, ROPSFOPS CALL EAST PBE! ........................................................................ $75,000 PINE BUSH! ..............................................................................................$$9,500 2005 KOMATSU SK714-5, STK # S04375C, 774 HOURS, MAN. QUICK 2004 HYPAC C830C ROLLER, STK# R1939C, S/N 531030, 1165 HRS, 66" DRUM, CAB W/HEAT, CALL EAST PBE! ................................................$$42,000 COUPLER, 61" BKT. W/BOE, PATTERN CHANGE VALVE, REAR C/W, NEW TIRES, CALL EAST PBE! ........................................................................$$12,900 WHEEL LOADERS 2004 KOMATSU SK820-5, STK# S03442X, S/N TF50093, SKIDSTEER WITH 1984 FORD A64, STK# W04409, S/N RSO2938, ARTICULATED WHEEL LOADER, CAB BUCKET W/BOLT ON EDGE, CALL PINE BUSH! ............$$12,500 CAB, HEAT, PALLET FORKS, STEEL TRACKS, CALL EAST PBE! ..........$$21,000 2001 KOMATSU WA380-3, STK# W02389CX, 9200 HRS, CAB, THIRD VALVE, 2009 NEW HOLLAND C175, STK# S03968C, S/N N8M487921, 116 HRS, FACTORY AUTO LUBE, NEW TIRES, 4.25 YD BKT, WELL MAINTAINED CALL FULL CAB W/AIR CONDITIONER, 12” RUBBER TRACKS, UNIVERSALE EAST PBE! ..............................................................................................$$80,300 HYDRAULIC COUPLER, 74” GP BKT W/BOLT-ON-EDGE, HI-FLOW, AUXILIARY 2005 KOMATSU WA380-5, STK# W04115C, S/N A52658, 6000 HOURS, A/C, WORK LIGHTS, CALL EAST PBE! ..........................................................$$34,500 TELESCOPIC BOOM LIFT ECSS, 4.3 CU. YD. BUCKET, CALL EAST PBE! ......................................$$88,000 2001 KOMATSU WA450-3MC, STK# W02330X, 10913 HRS, SOLID TIRES, 5 1999 GROVE AMZ50XT, STK# J04288X, S/N M48623, ALL WHEEL DRIVE, YD GP BUCKET, CALL PINE BUSH! ......................................................$$78,900 COMBINATION PROPANE-GASOLINE, CALL PINE BUSH! ....................$$12,000 TRACTOR 1993 KOMATSU WA600-1, STK # W04691C, S/N A10367, 16,000 HOURS, JOHN DEERE MODEL 80 TRACTOR, STK# E04224, S/N# X010160, CALL RUNS WELL, SHEET METAL RUST, SOME LEAKS, TIRES 90%, CALL EAST PBE! ........................................................................................................$$42,000 PINE BUSH! ............................................................................................$$24,500

*PRICES SUBJECT TO CHANGE AT ANY TIME *NOT RESPONSIBLE FOR MISPRINTS

Page 18 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cat Calls Move ‘Strong Statement’About Mining’s Future CATERPILLAR from page 1

the boards of directors of both companies, Bucyrus shareholders will receive $92 per share, $7.6 billion in aggregate consisting of all cash. The transaction represents an implied premium of 32 percent to Bucyrus’ share price as of Nov. 12, 2010. Caterpillar will fund the acquisition through a combination of cash from the balance sheet, debt and up to $2 billion in equity.

The transaction is expected to close in mid-2011.

Caterpillar intends to locate its mining business headquarters in South Milwaukee, Wisconsin, where Bucyrus headquarters is currently located, and maintain the Bucyrus brand for the principal Bucyrus legacy products.

“For several years, mining customers have been asking us to expand our range of products and services to better serve their

increasingly complex requirements,” said Caterpillar Chairman and CEO Doug Oberhelman.

“This announcement says to those customers, we heard you loud and clear. It is a strong statement about our belief in the bright future of the mining industry. Our strategy calls for disciplined investment in attractive industries that value our product and service delivery model,” Oberhelman said.

“Our performance through the global economic turmoil of 20082009 allowed us to emerge with a strong balance sheet and the ability to make strategic investments in companies like Bucyrus. This, and other recent acquisitions, will position Caterpillar for industry leadership and will be positive for our stockholders, customers and employees.”

Tim Sullivan, Bucyrus president and CEO, said, “This is an outstanding and financially com-

pelling transaction for our shareholders. More fundamentally, it is a testament to the tremendous value our talented team of employees has created over the past several years and to the strength of our brand in the global mining machinery marketplace. I am confident that we have found an excellent partner in Caterpillar. Caterpillar is a first-rate global company and it shares our commitment to providing innovative products and exceptional service to customers, creating a collaborative and safe work environment for employees and minimizing the impact on the environment.

“We are very pleased that Caterpillar has committed to locate its mining business headquarters in Milwaukee and we are confident that the combined global platform will be extremely well positioned to capitalize on the substantial growth opportunities in this market

in the years ahead.”

The closing of the transaction is subject to regulatory approvals, customary closing conditions and approval by Bucyrus stockholders.

At that time, Caterpillar Group President Steve Wunning will have executive office accountability for Bucyrus, along with his current responsibilities for the company’s mining business.

“Even today at mine sites around the world, our customers are using Bucyrus shovels to load Caterpillar mining trucks,” Wunning said. “This combination, as well as the significant expansion in products and facility capacity already announced, gives us the opportunity to expand the range of surface and underground mining products and solutions offered to customers by Caterpillar and its dealer network.”

A driving motivation for the transaction is Caterpillar’s estimate

Technicians, Finishers Attend King of Prussia Equipment Service Seminar On Nov. 6, King of Prussia Equipment hosted a one-day service seminar with MQ-Whiteman, a manufacturing company of concrete construction equipment.

Tommy Tucker, senior field service manager, conducted the seminar, which concentrated on Whiteman ride-on power trowels and walkbehind trowels. King of Prussia had both a hydro-static 8 ft. ride-on trowel and 4 ft. walk behind Whiteman trowels available for hands-on servicing.

The service school began at 8 a.m. for the 15 participants consisting of mechanics and finishers from 8 companies based out of Pennsylvania and New Jersey. The school ended at 3:30 p.m. with a question and answer period.

Coffee and donuts as well as lunch was provided by King of Prussia Equipment. MQ-Whiteman provided notepads, pens and door prizes for each participant.

Students were educated on the proper maintenance and servicing.

Primary topics were lubrication, necessary greasing and fuel issues, especially with the new fuel tier levels.

King of Prussia Equipment Corp. of King of Prussia, Pa. has been a concrete equipment distributor in the tri-state area since 1980 and are one of the few “specialty concrete” dealers of MQ-Whiteman in the Pennsylvania, New Jersey, Delaware markets. Other major manufacturers represented are: Schwing America, Husqvarna-Soff-cut, Conforms, Benner-Nawman, Wyco, BartellMorrison, Camlever, Minnich Manufacturing and Vibco.

King of Prussia Equipment provides annual service seminars for its customers in conjunction with the manufacturers they represent. King of Prussia Equipment also sells parts, does service/repairs and rentals of the above-mentioned manufacturers.

MQ- Whiteman Inc. of Boise,

of more than $400 million in annual synergies beginning in 2015 derived from the combined financial strength and complementary product offerings of the combined mining equipment businesses.

Synergies driven by the acquisition include: • Market leading sales and support capabilities of Caterpillar dealers and a broad, one-stop shop for global mining customers • Caterpillar Remanufacturing products and services for Bucyrus equipment • Caterpillar engines and components to enhance performance and lower owning and operating costs for Bucyrus equipment • Additional scale and cost efficiencies in areas such as purchasing and engineering • Deployment of manufacturing best practices through the Caterpillar Production System

Idaho, is a manufacturer of concrete and masonry equipment with Multiquip headquartered in Carson, Calif., which distributes a full array of construction equipment throughout the United Stated and worldwide, including such brands as Mikassa, Rammax, Stow and Saunders Saws.

The companies represented at the King of Prussia Equipment/MQWhiteman Seminar included: • Forcine Concrete, Malvern, Pa. • GMAC Construction, Franklinville, N.J. • Schlouch Inc. Blandon, Pa. • R & W Concrete, Lansdale, Pa. • B. Pietrini & Sons, King of Prussia, Pa. • Brightline Construction, Philadelphia, Pa. • King of Prussia Equip., King of Prussia, Pa. • Anthony Biddle Contractors, Ambler, Pa. For more information, call 610/265-1036.

V i s i t C E G ’s We b S i t e a t w w w . c o n s t r u c t i o n e q u i p m e n t g u i d e . c o m

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 19

Voorhees, NJ 800-232-6535 Allentown, PA 800-383-8894 Scranton, PA 800-569-1400 Elkton, MD 800-544-7127

Delmar va, DE 866-486-1400 Baltimore, MD 888-601-7500 Albany, NY 800-854-5307

Walpole , MA 800-854-5310 Springfield, MA 800-854-5306 Por tland, ME 800-325-4253

Concord, NC 800-438-2250 Columbia, SC 800-915-9900 Jacksonville , FL 800-828-3055

New OX Dump Body Distributor for the Northeast Market.

This Month's Specials **Unique Opportunity**

New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys In Stock

New Trail King 55 Ton Lowboy, 24'x102" Tri-Axle Air Ride, Tapered Front 6 Ft. Hyd. Deck Ramp to Access Rear Deck.

NEW East Closed Top Aluminum Refuse W/F's, 50' x 96" x 100", Spring Suspension Leak Proof Floors, Compactor Compatible, 113 Cu. Yds

New East Hardox Steel Dumps 34' x 96" x 66" SUPER HEAVY DUTY - Demolition Trailer, Air Ride, Barn Door.

LIGHT WEIGHT 9,300 LBS.

New Manac 87 Cu. Yd. Hardox 450 Steel Dumps, 40'x102"x100" single point susp., barn door, 11R245 tires

New Trail King 60 Ton Double Drop Extendable, 53' x 102", Extends up to 51', Air Suspension Flip Box and Flip Axle Included

New Talbert tags, 21' deck, 6' beaver tail

New East walking floors, 48' long x 102" x 13', spring suspension; Keith walking floor installed. Also available, used aluminum refuse trailer.

Special Buy - Special Pricing - In Stock

Used Late Model, Double Drops, In Stock, Hydraulic and Mechanical Necks, Flip Axles Included.

Call For More Information

New Fontaine Revolution Drop Decks 48' x 102” Air Speed Suspension, Stronger than Steel Side Rails, 52,000 lbs. in 4 feet

90 25 New Fontaine 48'x102" combo flats, spring sliding tandems, chain ties, sliding winches, LED lights.

New Etnyre 35 Ton & 55 Ton Paver Special Low Boys, Air Ride Suspension, Tandem & Triaxle

NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!

New Talbert & Trail King 35 Ton Lowboys 22" Deck Height, Air Ride Suspension

Excellent We Rent Lowbeds Financing We Rent Walking Floors Available

Visit Our Inventory at

www.haletrailer.com

New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available

New Landoll 440 & Trail King TK70SA, 50'x102", Air Ride Suspension, 20K Winch, Wireless Remote, PSI System & Dock Levelers Optional

We Rent Lowboys, Blade Trailers, Etc.

Page 20 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2009 Link-Belt 218HSL, 180’ Boom, (2) 15’ Tube Jib Exts, 15T Swvl Hkball, 80T 4-Shv Hkblk, A&B Upper & Side Front Ctwts, 5’ Tip Ext., stk5383...... ......................................................................$POR

2008 Link-Belt 298HSL, 270’ Boom, 90’ Jib, A/C, Mitsubishi 365HP, 20T Swvl Hkball, 40T 1-Shv Hkblk, 165T 5-Shv Hkblk with HD Bearings, stk4975 ........................................................$POR

2008 Link-Belt HTC8660-II, 25T 3-Shv QR Hkblk, Heat & A/C Lwr, 15,100 lb. Ctwt Removal, Aux Lifting Sheave, 8.5T Swvl Hkball, 28.5’-51’ Offset Fly, stk4931 ..................................................$POR

2008 National 14127A, 30’ Boom Ext., Hour Meter, O/R Controls Box, Sterling LT9513 410HP, stk4885 ........................................$POR $289,500

1984 Grove RT740, 40 Ton, 104’ Power Pinned Boom, 32’ Jib, 8.5T Swvl Ball, Anti-Two Block, Cummins V555, stk6057 ..........................$65,000

2007 National 13110H, 110’ Boom, 44’ Jib, 22’ SD Flatbed, Ctwt, SFO, Sterling LT9513, Air Shift PTO, 22’ Torsion Box, Rear Removable Boom Rack, stk4287 ........................................$209,500

2008 Terex RT230-1, 26-43’ Offset Jib, 7T Overhaul Ball, 30T 4-Shv Hkblk, Subheater Assy Kit, 5/8 x 450 Cable Assy, stk4581 ..............$POR

2000 Link-Belt HTC8640HL, ONE OWNER, 105’+51’, Aux Sheave, 8.5T Ball, 25T 3-Shv Block, Cummins 330HP, stk6111 ......................$179,500

2008 Link-Belt RTC8065II, 8.5T Swvl Hkball, Aux Lifting Sheave, Diesel Heat & A/C Upper, RCL Light Bar, Winch Roller-2 Drum, Rear Steer Indicator, Pump Disconnect, 2 Winches w/2-Spd, 35-58’ Offset Fly, 40T 4-Shv Q/R Hkblk, stk4747 .. ......................Reduced Price $369,500 $389,500

2008 Link-Belt RTC8050II, 40T 4-Shv Q/R Hkblk, Aux Lift Sheave, 8.5T Swvl Hkball, 28.5-51’ Offset Fly, 2 Winches w/2-Spd, stk4822 ..........$299,900

1998 Terex RO BT4485, 85'+40', 7-Ton Swivel Ball, 21’ Wood Bed w/Rub Rails, Front Stabilizer, Kruger Load System, Ford LT8501, Cummins 275HP, stk6000 Reduced Price $59,500 $69,500

2007 Tadano TM1052, Non-CDL Chassis, 52’ Boom, Radio Remote, New 2004 Sterling Acterra, 3-Pos O/R Charts, 60’ Tip Height, Continuous Rotation, Out & Down O/R, Stk4249 ........$79,900

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 21

Lease machines these for for approx 12-18 Mo. . monthly re HALF the ntal rate!

Used Equipment Showcase

! ARTICULATED LOADERS

BOBCAT 2400, 1984, Stk# 511218A1, 0 HRS........................................................................................$4,250 JOHN DEERE 444J, 2008, Stk# 650811, 319 HRS ..........................................................................$114,000 JOHN DEERE 524K, 2009, Stk# 656044, 678 HRS ..........................................................................$115,000 JOHN DEERE 544J, 2007, Stk# 613360, 1478 HRS ........................................................................$102,000 JOHN DEERE 544J, 2007, Stk# 623853, 1778 HRS ..........................................................................$99,000 JOHN DEERE 624J, 2008, Stk# 638304, 1988 HRS ........................................................................$120,000 JOHN DEERE 644J, 2006, Stk# 576214, 4199 HRS ........................................................................$119,000 JOHN DEERE 644J, 2006, Stk# 591669, 1713 HRS ........................................................................$140,000 JOHN DEERE 644J, 2007, Stk# 613369, 2733 HRS ........................................................................$129,000 JOHN DEERE 644J, 2007, Stk# 634172, 1179 HRS ........................................................................$169,000 JOHN DEERE 744J, 2004, Stk# 593622A1, 6764 HRS ....................................................................$115,000 JOHN DEERE 744J, 2007, Stk# 631888, 1428 HRS ........................................................................$265,000 JOHN DEERE 824J, 2003, Stk# 586898A1, 9014 HRS ......................................................................$83,000

! BACKHOE LOADERS

JOHN DEERE 110T, 2006, Stk# 38876, 624 HRS................................................................................$30,000 JOHN DEERE 310G, 2007, Stk# 604846, 930 HRS ............................................................................$56,000 JOHN DEERE 310J, 2008, Stk# 638256, 4 HRS..................................................................................$69,500 JOHN DEERE 310J, 2009, Stk# 672168, 512 HRS..............................................................................$69,000 JOHN DEERE 310SE, 1998, Stk# 842437A1, 6703 HRS ....................................................................$26,000 JOHN DEERE 310SG, 2002, Stk# 907024A1, 3646 HRS....................................................................$36,000 JOHN DEERE 310SG, 2005, Stk# 949558A1, 452 HRS......................................................................$39,500 JOHN DEERE 310SJ, 2007, Stk# 622925, 1322 HRS ........................................................................$60,000 JOHN DEERE 310SJ, 2007, Stk# 623582, 1125 HRS ........................................................................$59,000 JOHN DEERE 310SJ, 2008, Stk# 650276, 986 HRS ..........................................................................$65,000 JOHN DEERE 310SJ, 2008, Stk# 660246, 1065 HRS ........................................................................$69,000 JOHN DEERE 310SJ, 2009, Stk# 672169, 801 HRS ..........................................................................$79,000 JOHN DEERE 310SJ, 2008, Stk# 157704, 1859 HRS ........................................................................$62,000 JOHN DEERE 410J, 2008, Stk# 160005, 1186 HRS ..........................................................................$65,000 JOHN DEERE 410J, 2009, Stk# 172515A1, 2 HRS ............................................................................$69,900 JOHN DEERE 410J TMC, 2007, Stk# 614483, 778 HRS ....................................................................$79,900 NEW HOLLAND LB90B, 2004, Stk# 050629A1, 2462 HRS ..............................................................$28,500

! COMPACT TRACK LOADERS

JOHN DEERE CT322, 2007, Stk# 069741, 541 HRS ..........................................................................$27,500 JOHN DEERE CT322, 2007, Stk# 050033, 475 HRS ..........................................................................$32,500 JOHN DEERE CT322, 2008, Stk# 076876, 306 HRS ..........................................................................$45,000 JOHN DEERE CT332, 2008, Stk# 077444, 909 HRS ..........................................................................$29,000

! COMPACTORS

BOMAG 120AD, 2008, Stk# 6650A, 448 HRS......................................................................................$27,000 BOMAG 120AD, 2008, Stk# 7113A, 613 HRS......................................................................................$25,000 BOMAG 138, 2008, Stk# 7113D, 296 HRS ..........................................................................................$44,500 BOMAG 145D-3, 2005, Stk# 6658C, 884 HRS ....................................................................................$32,000 BOMAG 145D-3, 2007, Stk# 7091D, 272 HRS ....................................................................................$49,000 BOMAG 145D-3, 2007, Stk# 7091E, 384 HRS ....................................................................................$45,000 BOMAG 177, 2007, Stk# 7091F, 455 HRS............................................................................................$65,000 BOMAG 177D-3, 2003, Stk# 061499A2, 1052 HRS............................................................................$36,000 BOMAG 211D-40, 2008, Stk# 7133J, 408 HRS ..................................................................................$75,000 BOMAG 213D, 2007, Stk# 7091L, 1166 HRS......................................................................................$82,000 BOMAG 213D, 2007, Stk# 7091M, 837 HRS ......................................................................................$91,000 BOMAG 213D-4, 2007, Stk# 7133A, 248 HRS ....................................................................................$90,000 BOMAG 213D-4, 2007, Stk# 7133B, 368 HRS ....................................................................................$99,000 BOMAG 266AD4, 2008, Stk# 6650D, 331 HRS ................................................................................$113,000 BOMAG 278D, 2007, Stk# 6616, 543 HRS ........................................................................................$116,000 INGERSOLL RAND DD-90HF, 2004, Stk# 176986A1, 1694 HRS ......................................................$39,000 INGERSOLL RAND DD-90HF, 2004, Stk# 178129A1, 1250 HRS ......................................................$39,000

! CRAWLER DOZERS

JOHN DEERE 1050C, 2005, Stk# 538908, 2697 HRS ......................................................................$196,000 JOHN DEERE 450J, 2006, Stk# 568199, 1438 HRS ..........................................................................$43,500 JOHN DEERE 550J, 2008, Stk# 659312, 624 HRS..............................................................................$85,000 JOHN DEERE 650J, 2007, Stk# 620598, 1074 HRS ..........................................................................$82,500 JOHN DEERE 650J, 2007, Stk# 634089, 358 HRS..............................................................................$85,000 JOHN DEERE 650J, 2007, Stk# 634090, 519 HRS..............................................................................$83,500 JOHN DEERE 650J, 2007, Stk# 148203, 1150 HRS ..........................................................................$77,000 JOHN DEERE 750C, 2004, Stk# 529966, 2526 HRS ........................................................................$122,000 JOHN DEERE 750J, 2006, Stk# 574572, 3171 HRS ..........................................................................$99,000 JOHN DEERE 850C, 2004, Stk# 509304, 3648 HRS ........................................................................$145,000 JOHN DEERE 850C, 2005, Stk# 528588, 2361 HRS ........................................................................$105,000 JOHN DEERE 850J, 2006, Stk# 554083, 2704 HRS ........................................................................$145,000 JOHN DEERE 850J, 2006, Stk# 564176, 2531 HRS ........................................................................$170,000 JOHN DEERE 850J, 2006, Stk# 570672, 2391 HRS ........................................................................$170,000 JOHN DEERE 850J, 2006, Stk# 571178, 2400 HRS ........................................................................$145,000 CAT D6H, 1995, Stk# G06137A1, 8319 HRS ......................................................................................$47,000

NEW LOCATIONS NOW OPEN IN...

Featured Featured Equipment Equipment

! HYDRAULIC EXCAVATORS

JOHN DEERE 120C, 2007, Stk# 631620, 811 HRS ............................................................................$85,000 JOHN DEERE 120C, 2008, Stk# 642087, 561 HRS ............................................................................$87,000 HITACHI 135-2, 2008, Stk# 640819, 578 HRS ..................................................................................$104,000 JOHN DEERE 135-C, 2007, Stk# 616561, 1012 HRS..........................................................................$85,000 JOHN DEERE 135-C, 2007, Stk# 629884, 954 HRS............................................................................$99,000 JOHN DEERE 135-D, 2009, Stk# 302153A1, 165 HRS ....................................................................$109,000 JOHN DEERE 160CLC, 2006, Stk# 576210, 1383 HRS ......................................................................$92,500 JOHN DEERE 160CLC, 2007, Stk# 607393, 1545 HRS ......................................................................$90,000 JOHN DEERE 160CLC, 2007, Stk# 610554, 1766 HRS ......................................................................$90,000 JOHN DEERE 200CLC, 2006, Stk# 567879, 2040 HRS ......................................................................$89,000 JOHN DEERE 200DLC, 2007, Stk# 631873, 1468 HRS....................................................................$119,000 JOHN DEERE 225C, 2005, Stk# 538818, 2292 HRS ..........................................................................$99,000 JOHN DEERE 225C, 2007, Stk# 615925, 1225 HRS ........................................................................$105,000 JOHN DEERE 240DLC, 2006, Stk# 574224, 1743 HRS....................................................................$135,000 JOHN DEERE 240DLC, 2006, Stk# 575941, 2119 HRS....................................................................$125,000 JOHN DEERE 240DLC, 2006, Stk# 576208, 2685 HRS....................................................................$105,000 JOHN DEERE 270CLC, 2004, Stk# 522918, 2954 HRS ....................................................................$105,000 JOHN DEERE 270DLC, 2007, Stk# 618360, 1760 HRS....................................................................$130,000 JOHN DEERE 330LC, 1999, Stk# NE080367, 5667 HRS....................................................................$62,500 JOHN DEERE 350DLC, 2007, Stk# 618588, 2920 HRS....................................................................$149,000 JOHN DEERE 350DLC, 2007, Stk# 633611, 2428 HRS....................................................................$214,500 JOHN DEERE 370C, 2005, Stk# 548540, 4411 HRS ..........................................................................$99,000 JOHN DEERE 370C, 2006, Stk# 570002, 3309 HRS ........................................................................$129,000 JOHN DEERE 450CLC, 2005, Stk# 538887, 4408 HRS ....................................................................$199,000 JOHN DEERE 450DLC, 2007, Stk# 609731, 2785 HRS....................................................................$229,000 JOHN DEERE 450DLC, 2008, Stk# 655654, 1920 HRS....................................................................$290,000 JOHN DEERE 600CLC, 2005, Stk# 551962, 3152 HRS ....................................................................$300,000 JOHN DEERE 650DLC, 2006, Stk# 590998, 2325 HRS....................................................................$455,000 JOHN DEERE 80C, 2005, Stk# 541734, 2829 HRS ............................................................................$39,000 JOHN DEERE 80C, 2006, Stk# 581984, 1394 HRS ............................................................................$46,000 JOHN DEERE 80C, 2006, Stk# 011660, 568 HRS ..............................................................................$52,500

2005 Asphalt Zipper AZ-360HD – JD 4.5L Engine, Trailer, Extra Drum, S/N 00133, Stk# 000133A1 $40,000

! HYDRAULIC HAMMERS

INDECO HAMMERS 12000#, 2003, Stk# 002084, 0 HRS..................................................................$75,500 INDECO HAMMERS 1500#, 2007, Stk# 6640A, 80 HRS....................................................................$19,500 INDECO HAMMERS 2000#, 2002, Stk# 0001841, 1 HRS..................................................................$21,500 INDECO HAMMERS 2000#, 2004, Stk# 0002098, 51 HRS................................................................$15,500 INDECO HAMMERS 5000#, 2005, Stk# 00003743, 7 HRS................................................................$40,500 INDECO HAMMERS 8000#, 2005, Stk# 6702F, 2 HRS ......................................................................$54,500 INDECO HAMMERS IHC130, 2005, Stk# 6702G, 15 HRS..................................................................$10,500

! MINI EXCAVATORS

JOHN DEERE 27D, 2009, Stk# 109220, 54 HRS ................................................................................$28,500 JOHN DEERE 27D, 2009, Stk# 116790, 294 HRS ..............................................................................$26,500 BOBCAT 331, 1999, Stk# 917888A1, 0 HRS........................................................................................$11,900 JOHN DEERE 50D, 2007, Stk# 068726, 210 HRS ..............................................................................$45,000 JOHN DEERE 50D, 2007, Stk# 072127, 791 HRS ..............................................................................$39,000 JOHN DEERE 50D, 2007, Stk# NE245854, 314 HRS ..........................................................................$49,500 JOHN DEERE 60D, 2008, Stk# 097281, 568 HRS ..............................................................................$52,500

2008 John Deere 85D Excavator – Cab w/AC, Rubber Pads, 6’11” Arm, 24” Bkt, PT&H, 947 Hrs, S/N 016058, Stk# 016058E1 $69,500

! OFF-HIGHWAY TRUCKS

JOHN DEERE 250D, 2006, Stk# 548648, 2634 HRS ........................................................................$160,000 JOHN DEERE 250D, 2006, Stk# 548649, 2526 HRS ........................................................................$175,000 JOHN DEERE 300D, 2006, Stk# 548659, 3760 HRS ........................................................................$140,000 JOHN DEERE 300D, 2006, Stk# 559818, 3440 HRS ........................................................................$145,000 JOHN DEERE 350D, 2004, Stk# 508712, 5061 HRS ..........................................................................$99,000 JOHN DEERE 350D, 2005, Stk# 538797, 4413 HRS ........................................................................$185,000 JOHN DEERE 350D, 2006, Stk# 559821, 3189 HRS ........................................................................$175,000 JOHN DEERE 350D, 2006, Stk# 559822, 2664 HRS ........................................................................$210,000 JOHN DEERE 400D, 2003, Stk# 492376, 6428 HRS ........................................................................$100,000 JOHN DEERE 400D, 2005, Stk# 538799, 5126 HRS ........................................................................$155,000 JOHN DEERE 400D, 2005, Stk# 538800, 4023 HRS ........................................................................$195,000 JOHN DEERE 400D, 2006, Stk# 559827, 2345 HRS ........................................................................$300,000 JOHN DEERE 400D, 2006, Stk# 559828, 2516 HRS ........................................................................$315,000 HYDREMA 912C, 2006, Stk# 6598C, 1718 HRS ................................................................................$77,500

! SKID STEERS

JOHN DEERE 270, 2004, Stk# 934514A1, 765 HRS ..........................................................................$19,500 JOHN DEERE 315, 2008, Stk# 093401, 183 HRS................................................................................$20,000 JOHN DEERE 332, 2007, Stk# 066751, 793 HRS................................................................................$30,500 JOHN DEERE 332, 2005, Stk# 0792560, 315 HRS ............................................................................$31,500 JOHN DEERE 332, 2008, Stk# 161837A1, 127 HRS ..........................................................................$33,000 JOHN DEERE 332, 2008, Stk# 173199A1, 331 HRS ..........................................................................$31,500 NEW HOLLAND L190, 2007, Stk# 436470A1, 336 HRS ....................................................................$25,500 NEW HOLLAND LS170, 2000, Stk# 167497A1, 843 HRS..................................................................$14,000

! TRAILERS

MISC. CAM716, 2008, Stk# 023252A1, 0 HRS ....................................................................................$4,500 MISC. M20825TA, 2010, Stk# 014340, 0 HRS....................................................................................$18,500

Middletown, DE • Frederick, MD • White Plains, MD Delmar, MD • South Baltimore, MD

Keith Price

Eric Paterno

Anthony Falzarano

Mike Hatter

Fairfield, NJ 07004 1275 Bloomfield Ave PH 973-227-2221 or 800-321-8080 FX 973-575-5553 WEB www.jesco.us

Lumberton, NJ 08048 1790 Route 38 PH 609-267-2020 or 888-217-0600 FX 609-261-8559 WEB www.jesco.us

S. Plainfield, NJ 07080 118 St Nicholas Ave PH 908-753-8080 or 800-241-7070 FX 908-753-7853 WEB www.jesco.us

Beacon, NY 12508 495 Fishkill Avenue PH 845-831-1800 or 800-724-0725 FX 908-821-1671 WEB www.jesco.us

2007 John Deere 410J TMC Backhoe Loader – Quick Coupler, Cab, A/C,, AM/FM/CD, 778 Hrs, Stk# 614483, S/N# 149664 Asking $79,000

Page 22 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

SOLD 1998 New Holland 555E, Cold Start, Cab With Heat, 4277 Hours, Well Kept Machine ......................$24,995

2006 New Holland LB90, SN: 4612, 551 Hours, Pilot Controls, 1000lb Hammer, Full Cab ................$59,995

845/278-7766 Fax: 845/278-4431 E-mail: equip@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT SKID STEERS 2010 NEW HOLLAND L180, SN:2030, 41 HOURS, DELUXE CAB, 2 SPEED, LIKE NEW MACHINE, 96” MULCH & SNOW BUCKET ..........................................................................................$33,395 2006 NEW HOLLAND L185, SN: 5839, CAB WITH HEAT/AC, 312 HOURS, 78” LOW PROFILE BUCKET ..............................................................................................................................$29,995 2007 NEW HOLLAND L175, SN:3424, 158 HOURS, CAB W/HEAT, NEW TIRES ................$32,995 2008 NEW HOLLAND L175, SN: 4511, CAB WITH HEAT, HI FLOW, 171 HOURS ..............$33,995 WHEEL LOADERS 2008 NEW HOLLAND W130, FULL CAB, 343 HOURS, LIKE NEW MACHINE, CLEAN ......$96,995 2009 NEW HOLLAND W110, FULL CAB, 150 HOURS, 2.25CU YD. BUCKET, LIKE NEW MACHINE ..........................................................................................................................................$89,995 2006 NEW HOLLAND LW170B, 1134 HOURS, JRB COUPLER, JRB 3.0YD BUCKET ........$89,995 EXCAVATORS CAT 312, 6108 HOURS ......................................................................................................$29,995 1988 CAT E110 EXCAVATOR, CAB, THUMB, 3173 HOURS................................................$22,995 HITACHI EX60URG EXCAVATOR, LEVELING BLADE, 2-PIECE BOOM, CAB 5493 HRS......$14,995 2006 KOBELCO 80CS, 3148 HOURS, RUBBER TRACKS, THUMB CAB WITH HEAT/AC ....$44,995 2007 KOBELCO 115SR EXCAVATOR, HELAC SWINGER, 1152 HOURS, MINT COND ......$84,995 2007 KUBOTA KX080 EXCAVATOR, 500 HOURS, COUPLER, THUMB ..............................$69,995 2004 NEW HOLLAND EH160, CAB WITH HEAT, MANUAL THUMB....................................$79,995 2008 VOLVO EC210 EXCAVATOR, 677 HOURS, LIKE NEW MACHINE, LEMAC HYDRAULIC THUMB, QUICK COUPLER, 42: BUCKET, FULL CAB........................................................ $115,000 DOZERS 2005 NEW HOLLAND DC85 DOZER, 9’ BLADE, CAB WITH A/C, 358 HOURS ..................$65,995 TRACTORS 2001 NEW HOLLAND TC33DA, 200 HOURS, 7308 QUICK ATTACH LOADER, WOODS MD160 REAR MOWER ....................................................................................................................$12,000 1999 NEW HOLLAND TS110, FULL CAB, MODEL 7511 LOADER, 1674 HOURS ..............$41,995

2004 New Holland LW170B, 3199 Hours, JRB Coupler ......$84,995

TLB’S 2002 KUBOTA L35, 1201 HOURS, 8’ WOODS LR108 RAKE, OPEN ROPS ........................$12,995 2003 KUBOTA L35, 807 HOURS, REMOVABLE TOOTH BAR, OPEN ROPS........................$19,995 2006 NEW HOLLAND LB90, SN:4612, 551 HOURS, PILOT CONTROLS, 1000LB HAMMER, FULL CAB ....................................................................................................................................$59,995 2006 NEW HOLLAND B110, TOOL CARRIER, PILOT CONTROLS, FULL CAB, QUICK COUPLER .... ..........................................................................................................................................$69,995 1998 NEW HOLLAND 555E, COLD START, CAB W/ HEAT, 4277 HRS, WELL KEPT MACHINE ........ ................................................................................................................................SOLD $24,995 CHIPPER/STUMP GRINDERS 1990 BANDIT 100 CHIPPER, GAS ENGINE, 1865 HOURS ..................................................$9,995 2008 BANDIT 200XP CHIPPER, 818 HOURS, 115 HP DEERE ENGINE, WINCH ................$24,995 2005 BANDIT 254XP CHIPPER, 1190 HRS, AUTO FEED, QUAD FEED, WINCH, YOKE LIFT ............ ..........................................................................................................................................$24,995 2009 BANDIT 2900T STUMP GRINDER, GREEN TEETH, 206 HRS, WIRELESS REMOTE $43,995 1997 CARLTON 2300-4 STUMP GRINDER, WITH 1997 PARKER TRAILER, 23 HP ENGINE, 1100 HOURS ................................................................................................................................$7,995 2000 RAYCO STUMP GRINDER, SELF PROPELLED, DUAL WHEELS, 1067 HOURS........ $17,995 MISCELLANEOUS 2009 CUB CADET GT2544 LAWN TRACTOR, 54 HOURS, 44” MOWER, 2 SET OF TIRES, PLOW, LOADER, CHAINS ................................................................................................................$4,500 2007 BOBCAT MT55 MINI CRAWLER LOADER, WALK BEHIND, QT BUCKET AND QT TRENCHER, 81 HOURS ..........................................................................................................................$17,995 2007 CAM SCOUT TRAILER, FORK POCKETS, POST HOLE DIGGER BRACKET, ATTACHMENT SHELF, ELECTRIC BRAKES ..................................................................................................$2,500 2002 WOODS MODEL 1130 POST HOLE DIGGER ..................................................................$750 2008 WOODS BB600W ROTARY CUTTER, 60” CUT, LESS THAN 50 HOURS USAGE ........ $2,995

2007 New Holland L175, SN: 3424, 158 Hours, Cab With Heat, New Tires....................................$32,995

2000 New Holland 555E, 4WD, Cab with Heat and A/C, 3700 Hrs ........ ..........................................$23,500

1996 Bradco 11HD, Backhoe for Skid Steers ............................$5,000

See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE AT WWW.WTRACTOR.COM

For all your

Concrete Equipment

IN

IN

S TOCK

S TOCK

Complete Concrete Pumping Systems

needs - call

K ING OF P RUSSIA E QUIPMENT C ORP. 111 East Church Road King of Prussia, PA 19406

610/265-1036

Sales • Service • Rentals • Parts

Textile Reinforced Hose

Wire Reinforced Hose

High Pressure Boom Hose

Couplings

Safety Sling

2", 3", 4" and 5" Placing Pipe, Prime Time II

Shotcrete Nozzles

Placing Elbows

Boom Elbows

Also Reducers Hose Placing Disc

V isit Us at Our Web Page: www.kingofprussiaequipment.com for Our Pr oduct Line

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees

WHEEL LOADERS

OFF ROAD HAULERS

SPECIALS

TRUCKS & TRAILERS

Komatsu WA180-1, 1996, EROPS, Quick Coupler, Komatsu CD60R-1 Crawler Dump Truck, 1997, 360° Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500 (2) 48' Box Vans w/Liftgates, Good Condition . . . . ..

Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500 rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000 (12) IR L6-4MH Light Plants, 1992-1995, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Komatsu WA250-3PT, 1999, EROPS w/AC, JRB cou- Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL pler, bucket, forks 20.5x25, good cond. . . . .$63,500 Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500 IAmerican Augers 16" Boring Machine, 10 HP gas, CRUSHING & CONVEYING Komatsu WA500-1, 1992, EROPS, w/ A/C, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500 high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000 Power Screen, Mark II, 1987, Port. Screening Plant, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently BACKHOES Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . ..

Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000 off work), work ready . . . . . . . . . . . . . . . . . . . .$127,500 Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GP New Holland LS170 Skid Steer, 2004, 300 hrs . . . .. Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000 Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000 working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000 Case 580L Rubber Tire Loader Backhoe, 1997, side & rear conveyors, T/A carrier . . . . . . . . . . .CALL John Deere 624G, 1996, EROPS, quick coupler, GP Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500 bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000 A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000 Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24" DRILLS Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500 COMPACTORS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000 Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 IR DD22, 1993, 39" double steel, vibratory, Deutz dsl, Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx MOTOR SCRAPERS water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500 7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good John Henry Drill Mtd on Cat 320L, 1994, 24' drill, IR SD100D Pro-Pac Vibratory Compactor, 1999, condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL carousel, dust collector . . . . . . . . . . . . . . . .$162,500 Hydrostatic trans 84" smooth drum, drum drive . . . .. Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, Cat 621E, 1989, Scraper, OROPS, 33.25x29, very . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 P/S trans, working everyday on jobsites . . . . . .$87,500 nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL CRANES IR SD105DX, 2002, 84" drum drive, OROPS, very Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 P/S trans, 26 cy, working everyday on jobsites $89,000 HYDRAULIC EXCAVATORS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom IR SD105DX, 2002, 84" drum, OROPS, clean . . . . .. Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .. pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000 Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 secIR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Hitachi UH181, 1985, Equipped w/hammer . . . . . . ..

IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, tion boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 CRAWLER TRACTORS Gradall-Hopto 300, 1968, G.M. diesel UP, on Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane, IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS .

Cat D4H Series II, 1990, OROPS, 6 way blades, 18" rubber, operational . . . . . . . . . . . . . .$10,500/OFFER duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000 Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500 nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000 U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500 MISCELLANEOUS Cat 825B, 1975, cab, S-blade, 50% front, 20% rear Cat D6H LGP Series II, 1993, EROPS, diff steer, Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM, tires, good runner, can go to work . . . . . . . . .$52,500 drawbar, 30" pads, fresh undercarriage . . . .$89,000 JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000 (2) Balderson Broom Attachment for Cat IT Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%, Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . Kobelco SK200LC Extra Long Reach, 1993, 32" front 60%, good condition . . . . . . . . . . . . . . . . .CALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000 TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500 Machines, 8' wide, good condition . . . . . .$4,000 ea.

Galion S4-6B, Deutz dsl, hydrostatic, 42” drums, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . .. Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long transport wheels, water spray . . . . . . . . . . . . .$4,800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 ATTACHMENTS Hypac C747B, 2001, articulated, vibratory, 47” drums, Komatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . .. Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" BUCKETS water spray, Deutz 2 cyl, 5500#, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500 Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 PC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, Hypac C850B, 1999, ROPS w/cab, 84” smooth drum, Over 100 Excavator, Loader, Specialized & 27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000 LANDSCAPING drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500 Grapple Buckets in Stock (5) Komatsu PC128UU, 1996, offset boom, Multiquip MR8G Walk Behind Vibratory Case 480 Broom Tractor, frt mounted 6' sweepster rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALL -Call For Your Needs Compactor, 1997, Briggs & Stratton 8 HP gas engine broom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000 Komatsu PC750 LC-6, 1999, 454 hp, 27” boom, FORKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine, 11’10” stick, 44’ DGB, aux plumbing, bucket choice, Rammax Walk Behind Rollers, over 25 in stock, 55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500 (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, 24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000 lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB cou- excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 (8) Sheepsfoot, 48" and 60", double drum & single hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500 pler, 31.5” TBG, ctwt removal, choice of bkt .$77,500 (5) Cat 936/926/950 pallet forks, for a Balderson quick drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd Komatsu PC400 LC-6LK, 11’1” stick, 35.5” TBG, ctwt coupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea (2) Champion Superpac A421 . . . . . . . . . .$11,500 lift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500 removal, choice of bkts, working everyday . .$97,500 Others Available Call Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB CRAWLER LOADERS Prices Are Negotiable - At Your Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . .. angle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500 coupler, plumbed, 8’6” width, nice, work ready CALL Inspection Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 AIR COMPRESSORS All Equipment is Owned & Operated By stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbCat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL ing very good condition . . . . . . . . . . . . . . . .$205,000 ALEX E. PARIS CONTRACTING CO., INC.

Page 24 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JCB Launches New Generation Skid Steers, Compact Track Loaders

JCB hosted North American dealers and both U.S. and tracked machines, both radial and vertical lift, ranging from international press Nov. 5 at the launch of its new line of skid 1,300 to 3,500 lbs. (589 to 1,587 kg). steer loaders and compact track loaders. The company The new generation machines benefit from a number of invested 40 million dollars into these products, which are new features, including: “representative of one year of thinking and two years in the • A tilting cab with increased service access making,” according to the • Multi-function joymanufacturer. sticks These “New • A hydraulic quick JCB put on a theatrical presentation to showcase its Generation” machines are hitch New Generation machines. the first to not only be • Isolated cab that is manufactured but also sealed and pressurized designed and engineered with reduced noise levels at the company’s North • Heated air-suspension American headquarters in seat with adjustable armSavannah, Ga., which is rests “the skid steer capital of • O-ring face seals for the world,” according to all hydraulic connections Larry Ashley, sales sup• A new range of more port manager. than 30 types of JCB John Patterson, deputy attachments. chairman of JCB, said, Best-In-Class “North America generates Visibility 60 percent of the worldThe new vertical lift wide demand for skid machines showcase JCB’s steers and compact track “PowerBoom” design, JCB’s sales support manager of North America, Larry loaders, so developing and Ashley (R), points out the increased cab space on the producing the new gener- JCB representatives were on hand to answer questions in which uses a single arm, the factory lobby. new generation of machines rather than the convenation of machines in Savannah makes perfect sense and has enabled us not only tional two arm skid steer design. The JCB models do not to meet the unique needs of the North American market but require a torque tube across the back of the machine providalso develop a machine range that will have universal ing operators with an unobstructed rear view and better all around visibility for increased job site safety and driver conappeal.”

JCB has introduced a range of seven new skid steers — fidence.

To further enhance visibility JCB has eliminated the mesh four wheeled and three tracked — in a range that will eventually grow to 18 models. All seven machines are vertical lift, screen on the cab machines and replaced it with laminated which allows for increased capacity and more reach at max- glass. imum lift height. The models now available — the 260, 280, Best-In-Class Serviceability 300 and 330 wheeled skid steers and 260T, 300T, 320T comWith O-ring face seal hydraulic fittings and a simplified pact track loaders — are large platform machines with rated operating capacities (ROC) of 2,600 lbs. (1,179 kg) and design resulting in 38 percent fewer parts, JCB’s new machines are even easier to service, according to the manuabove.

With the introduction of the New Generation machines, facturer.

JCB will be able to offer a complete range of wheeled and Larry Ashley (L) presents the overall machine. see JCB page 28

Larry Ashley presents the new tilting cab design, which allows easier access to the machine’s power train and hydraulic components.

JCB’s Larry Ashley (L) sales support manager of North America, and John Patterson, deputy chairman JCB Group and chairman/CEO JCB Inc., fielded questions from the international press representatives on the newest series of JCB machines.

A new machine just off the assembly line.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 25

We are excited to announce the addition of Doppstadt to our line of quality equipment manufacturers. The new Doppstadt line adds to the versatility of our existing lines and will provide our construction, demolition, recycling and municipal customers with top quality high speed grinders, slow speed shredders and trommel screens.

To learn more about Doppstadt equipment go to www.traceyroad.com and click on the Doppstadtus logo.

Enter Ad Code 1K10 to receive a FREE gift!

2005 Komatsu WA200-5

Eastern PA’s New Pro-Tech Dealer

2350 Schoenersville Rd. • Allentown, PA 18109 Office: 610-264-3090 Fax: 610-264-7384 piechotas@hotmail.com

3725 hours, Cab w/AC & Heat, GP Bucket, Ride Control, Add’l Counterweight $79,500

We Also Sell Bulk & Bagged Rock Salt Call For All Your Snow Removal & Deicing Needs

Always open during snow storms.

Page 26 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com

When You Buy Equipment From Cleveland Brothers,

You’re Buying More Than Just Iron! $47,000

$92,000 2005 CAT D3G, 1865 Hrs, S/N: BYR00862, ID# UT11641N

2005 CAT 420D, 3985 Hrs, S/N: FDP25515, ID# UP11337BN 2006 CAT 930G, 6181 Hrs, S/N TWR01899, ID# UT11610N

$37,000 $10,000

$94,000

$26,000

$45,000

SOLD $20,000 1996 JOHN DEERE 710D, 7515 Hrs, S/N: 820361, ID# UT11582

$86,000

2008 CAT CS54, 2528 Hrs, S/N: OC5R00101, ID# UP10849N

$89,000

1995 BOBCAT 853, 4232 Hrs, S/N: 512818553, ID# UT11633

1996 CAT 950F, 6015 Hrs, S/N: 08TK02579, ID# UP10692N

1999 CAT 953C, 12087 Hrs, S/N: 02ZN02224, ID# UP8358N

2000 CAT 953C, 9438 Hrs, S/N: 02ZN03513, ID# UT11502N

$52,000

$95,000

$71,000

$148,000

2002 CAT D6M XL, 10,175 Hrs, S/N: 03WN03167, ID# UT10834N

2002 CAT D6M XL, 12,653 Hrs, S/N: 03WN03160, ID# UT11221N

2004 CAT D6R LGP, 8695 Hrs, S/N: 0ADE00464, ID# UT9784BN

2004 CAT D4G XL, 5820 Hrs, S/N: 0HYD00565, ID# UP10570N

$270,000

$65,000

$61,900 1989 CAT D9N, 34,792 Hrs, S/N: 01JD01620, ID# UT10737N

1997 CAT D9R, 22,246 Hrs, S/N: 08BL00998, ID# UP10838N

JOE GONCALVES

(717) 561-3312 Harrisburg, PA jgoncalves@clevelandbrothers.com

$17,400

1999 CAT IT28G, 7939 Hrs, S/N: 08CR02025, I/D# UT10462N

TOM JAMIESON

(717) 561-3305 Harrisburg, PA tjamieson@clevelandbrothers.com

1999 CAT IT28G, 14,299 Hrs, S/N: 08CR02202, ID# UT10124N

2002 GEHL SL7800, 1862 Hrs, S/N: 901580, ID# UT11636

DUANE PHILLIPS

(412) 877-3549 Pittsburgh, PA dphillips@clevelandbrothers.com

For More Information, Call Our Used Equipment Department:

Find Our Complete Inventory

In Canada Call (877) 890-4900 (717) 635-7409

www.clevelandbrothers.com

(888) 262-3079

with detailed descriptions & photos on:

www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com

• www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com •

• www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com • www.clevelandbrothers.com •

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 27

Page 28 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The New Generation machines feature a range of more than 30 types of JCB attachments

U.S. Dealers, Media Get Up Close Look at New JCB Line JCB from page 24

A new tilting cab design gives technicians improved access to the machine’s power train and hydraulic components. The new models also feature a rear service door for easy access to the engine and daily checkpoints, a top-opening hood for radiator access and a hinged radiator for improved engine access.

Outstanding Operator Comfort The new generation machines have a larger entry door and a 17 percent larger cab than previous models. JCB also has introduced multifunction joystick controls and an optional heated air-suspension seat with adjustable armrests. Redesigned control panels have been relocated from the lower console to the panels at the top of the cab to be within the operator’s line of sight.

Other available creature comforts include cup holders, MP3 player compartment with charging outlet and auxiliary plug, optional stereo package and an electronic throttle.

Operators also will enjoy a quieter cab with noise levels at a very low 76dBa, an 85

percent improvement.

ductive machine that was based upon the same engineering principles as a telescopic handler, which also operates with a single boom. What seemed uncommon to others, JCB saw as common sense, and took the intelligent design of telescopic handlers and applied it to skid steer loaders. Our New Generation skid steers and track loaders embody this same spirit of innovation while taking performance, productivity and safety to an even higher level.”

For more information, visit www.JCBVision.com.

Versatility and Performance Switching to any of the machine’s 30 attachment families is a snap due to a standard universal mechanical hitch or an optional hydraulic quick hitch. Parallel lift and 2-speeds make it easy to maneuver around the job site and complete more tasks in less time, and with the introduction of an optional Smooth Ride System (SRS) transporting materials over rough terrain has been made easier, according to the manufacturer.

Safety As in previous models, the New Generation skid steers and compact track loaders feature a left side entry door that allows the operator to enter and exit the machine clear of the attachment and loader arm.

Value Owning a JCB skid steer or tracked loader costs less due to increased productivity and serviceability. Overall fuel consumption has been reduced 15 percent equating to an esti-

Jesse Hartranft (L) JCB skid steer specialist and Mark Coberly, JCB North American service manager, are prepared with all the answers.

New models of JCB skid steer loaders and compact track loaders are now being built exclusively in the Savannah, Ga., manufacturing plant for the worldwide market.

mated annual savings of more than $3,000 versus competitive machines (based on an off-road diesel price of $2.90).

“JCB has never shied away from innovation,” Patterson said. “Back in 1993, we introduced the industry’s first single-arm, or ‘monoboom’ skid steer, a safer, more pro-

Welders are hard at work in the JCB factory.

About JCB JCB has 19 plants on four continents: 11 in the UK, three in India and others in the United States, China, Germany and Brazil and employs around more than 7,000 people worldwide.

JCB is privately owned by the Bamford family and the Chairman, Sir Anthony Bamford, is the son of the company’s late founder, Joseph Cyril Bamford.

The company manufactures more than see JCB page 112

During factory tours, JCB’s Richard Mills presents the installation process of the JCB Dieselmax engines for the new generation of JCB skid steer and track loader machines.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 29

SAVE TIME SAVE LABOR SAVE OIL SAVE MONEY The FlangeLock Tool allows for the simple sealing of open SAE Code 61, 62 & 62KAT-Style hydraulic flanges without tools. Constructed out of lightweight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness.

• No Tools Required • No Expensive Hardware Needed • No more Rags stuffed into hoses • No more messy Plastic Caps • One hand Installation • The Ultimate Contamination Control Tool • Quick Installation & Ease of Usage • Eliminate Hydraulic Oil Spills & Clean up • Industry Acclaimed • 100% Made in USA • Safe for Personnel & Environment For more information contact Mike Pearl

914.980.8890

email: mike@flangelock.com www.flangelock.com

Bowie 1,500 Gal. Hydroseeder

2001 Cat 320CL Hydraulic Excavator

John Deere Dsl, Mtd. on 2004 Kaufman 10 Ton Tandem Trailer....$14,000

Auxiliary Hydraulics,Quick Coupler, Approx. 7,200 Hrs ................$65,000

2002 Cat 322CL Hydraulic Excavator

1999 Manitex M38100S 38 Ton Hydraulic Crane

9’8” Stick, 32” Tracks, Aux Hyd, Quick Coupler, Approx. 7300 Hrs $68,500

100' + 30', B&B, man basket, mtd. on M812 6x6 ..........................$95,000

(2) 2003 Cat M318C Wheeled Excavators

2001 Manitowoc 2892C 28 Ton Tr. Mtd. Crane

aux. hyd., VA boom, A/C ........................................................$65,000 EA.

92’ boom + 44’ jib mtd. on 2001 Ford Sterling LT7500, Cat dsl, 9-spd. trans., front stabilizer ....................................................................$77,500

1991 Cat D350D 35 Ton Articulated Dump Truck

1995 Cat D300D 30 Ton 6x6 Articulated End Dump

26.5x25 tires, County owned., approx. 16,000 hrs ........................$38,500

23x25 tires, approx. 8,500 hrs ......................................................$36,000

TO VIEW OUR ENTIRE INVENTORY VISIT www.equipmentmartofny.com

203/335-0100 Fax: 203/335-7996

Answering Machine 24 Hours E-mail us at equipmart@aol.com

EQUIPMENT WANTED

Page 30 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

We are a full service authorized Eager Beaver Dealer.

YOUR FULL SERVICE VIBROTECH SCREEN DEALER FOR NJ & DEL. John Deere 310SG

2004 John Deere 210LE

1995 Cat D6HXL Series II

Diesel, OROPS, 4x4, 84" Gannon Grader Box w/ Scarifiers, 86" GP Front Bucket ..................................$20,900

Diesel, Heat, A/C, Forks, 4x4, Air Ride Seat, Front Aux. Hyd, 2 Lever Control, Quick Coupler ......................$48,500

Diesel, OROPS, 24" size steel tracks, std blade with tilt ..................$54,900

2003 John Deere 650HLGP

2000 Komatsu WA320-3MC

2006 Takeuchi TW60

Diesel, OROPS, 6-Way Blade, New U/C, 10’6” Front Bucket........$36,900

Diesel, EROPS, 4x4, forks, ACS hydrau coupler ......................$52,900

Diesel, OROPS, Hydro Quick Coupler .. ................................................$32,500

2000 John Deere 624H

2004 Terex TH636C

2003 Bobcat

Diesel, EROPS, Heat, A/C, 4x4, Single Lever Controls ..............Call for Price

Diesel, 4 Cyl, Turbo, OROPS, 4x4, 36’ Height, 4’ Pallets, 6000 Lb Mach Cab ..............................................$18,900

Diesel, EROPS, 4x4, Hydro Drive, Quick Coupler, Heat, A/C ....$22,500

DELIVERY

Various New Excavators, Grapples and Thumbs

FINANCING

2731 TOWN LINE RD Alden, New York, 14004 (716)684-7784 or (716)684-7475

1979 Terex Loader $19,500

1970 Trojan Loader $12,500

1989 Trojan 3500Z $14,500

1981 Ditch Witch Asphalt Cutter $9,500

1983 Pettibone $17,500

2002 JLG Fork $26,500

1994 Sellick Forklift $14,500

1993 Vermeer 1250 $10,500

1992 Cat E70B Excavator $19,500

1997 Case 9020B Excavator $32,500

1981 Cat D5B $21,500

1988 Ingersoll Rand Milling Machine, $12,500

MIKE ZYNDORF LLC 609-625-8660 609-641-3342 (EVENINGS) FAX 609-625-8664

6481 Harding Hwy (Rt 40) Mays Landing, NJ 08330 Please Visit us www.mzequipment.com for our complete inventory

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 31

John Deere 555G Loader • 6’4” Track to Track Width • 90 Horse Power Engine • 21,058lb Operating Weight • 20,250 Static Tipping Load • Great Condition

1-877-725-3875

al i c e p S ar e Y e th f o d En avings!

S

NOW WITH 10 CONVENIENT LOCATIONS! 6

Towanda

220 15 Muncy

80 Centre Hall

99

522 81

11

78 78

Allentown

22 76 76

WORTHINGTON

95

Harrisburg

Mechanicsburg

Hatboro

81

ALUMINUM TRAILERS

Shippensburg

88

www.BestLineInc.com

THE HARDEST WORKING, MOST STT RELIABLE RELIABLE HEAVY HEAV EQUIPMENT ON THE PLANET REoNr T BUY

Authorized Dealer Best Line Equipment • Allentown, PA

USED SKID-STEERS Bobcat 873 #T123, 3500 hours, open cab ...............................................................$8900 2001 CAT 262 #T110, 3200 hours, open cab ............................................................$8900 2004 Bobcat 463 Stk#T996, Open Cab, Standard Controls, 250 hrs................. $10,900 2005 CAT 236 #T925, 1500 hours, Cab w/heat .................................................... $17,900 2007 Bobcat S300 Stk# 5594, Cab w/AC, Standard Controls, 1700 hrs ...........$23,900 2006 Bobcat S220 Stk#T390, Cab w/AC, SJC, 480 hours...................................$24,900 2007 Bobcat S220 Stk#T734, Cab w/AC, 2 Spd. SJC, 900 hrs ...........................$27,900

TRACK LOADERS & DOZERS 2004 CAT 277B # T283 4100 hours cab w/ac ....................................................... $17,900 2003 Bobcat T190 #T458 2200 hours cab w/ac .................................................. $17,900 2007 Bobcat T180 Stk# 2348, Open Cab, ACS, 900 hrs .......................................$26,900

2007 Bobcat T190 Stk# 7942, Open Cab, ACS, 750 hours ..................................$28,900 Case 440CTL Stk# D640, Cab w/AC, 900 hrs ........................................................$29,900 2008 Bobcat T320 Stk# 0025, 92 HP, Cab heat & AC, 839 hours .......................$35,900 2003 CAT 277 #T447 4000 hours open cab .......................................................coming in

TRACTORS/UTV’S 1993 MF 1210 #T909, 1100 HOURS, 4X4, 60” MID MOWER ...................................$5,500 2006 JOHN DEERE TRAIL GATOR, 400 HOURS, 4X4, ...............................................$5,900 2002 KUBOTA B7300 #T388, 850 HOURS, 4X4, 60” MOWER .................................$6,900 2005 KUBOTA RTV900, 1300 HOURS, 4X4, CAMO W/SOFT CAB ...........................$6,900 2009 KUBOTA RTV500, 20 HOURS , 4X4, LIKE NEW ............................................... $7,900 1992 CASE-IH 1140, 2100 HOURS , 4X4, LOADER TURF TIRES HYDRO .................$9,900 2003 JOHN DEERE 4410 #T562, 500 HOURS, 4X4, MID PTO ................................$13,900

1988 JOHN DEERE 1050 #D908, 2100 HOURS, 4X4, LOADER/BACKHOE .......... $13,900 2007 JOHN DEERE 2320 #T733, 210 HOURS, 4X4, LOADER AND 54” MOWER ..$14,500 2009 KUBOTA L3240DT #T657, 15 HOURS, 4X4, R4 TIRES LIKE NEW ................$15,900

EXCAVATORS 2003 BOBCAT 325 STK# T333, OPEN CANOPY, 2300HRS .................................... $10,900 2005 BOBCAT 331 STK# 5159, 7215 LBS., 122” DIG DEPTH, 1132 HOURS......... $20,900 BOBCAT 329 STK# 1214, OPEN CAB, RUBBER TRACK, 750 HRS ......................... $21,900 2006 GEHL 353 STK# 1713, OPEN CANOPY, 700HRS ............................................ $24,900 IR ZX125 STK# 0525, 2100 HRS ................................................................................$49,900

VIEW OUR FULL INVENTORY ONLINE 24/7

Authorized Bobcat Dealers : Muncy • Centre Hall • Shippensburg • Allentown • Mechanicsburg • Harrisburg • Hatboro • Towanda

www.bestlinebobcat.com • www.bestlineinc.com Authorized Dealer

1-877-725-3875

Pictures may not represent actual units. See Best Line Equipment for details.

Page 32 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact: Walt Kay Tel: 540/309-1709 Fax: 540/389-6507 Email: walter.kay@RSCrental.com

RSC Equipment Rental BOOM LIFTS

2004 JLG E300AJP-NAR, ART BOOM LIFT-30-34'-2WD DC, S/N 0300079224, UNIT #517940 ........................................$18,449 1999 GENIE Z45/25-DF-4WD, ART BOOM LIFT-45-49'-4WD, S/N Z452511283, UNIT#289324 ..................................$18,451 2005 JLG E400AN-NAR, ART BOOM LIFT-40-44'-2WD DC, S/N 0300081644, UNIT #541391 ........................................$22,471 2002 TEREX TB85-D-4WD, STR BOOM LIFT-85-89'-4WD, S/N 2660012, UNIT #7602108 ............................................$28,319 2000 JLG 660SJ-DF, STR BOOM LIFT-65-69'-4WD, S/N 0300053825, UNIT #350053 .......................................$25,445 2002 GENIE S85-DF-4WD, STR BOOM LIFT-85-89'-4WD, S/N S853354, UNIT #439174 ..............................................$39,132

AIR COMPRESSORS

2006 ATLAS COPCO XAS97JD, AIR COMPRESSOR-DSL-80185 CFM, S/N USA015223, UNIT#612085......................$6,599 2005 ATLAS COPCO XAS186, AIR COMPRESSOR-DSL-250375 CFM, S/N USA013977, UNIT#589291....................$10,809

C O M PA C T I O N

2005 MULTIQUIP MRH800GS, ROLLER-SMOOTH-DD-1500# 26”, S/N N4034, UNIT #588093......................................$5,002 2005 WACKER RT820, W/B ROLLER-PADFOOT-3000#, S/N 5599982, UNIT #585071 ................................................$6,655 2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000#, S/N 5549433, UNIT #548636..................................................$7,391 2005 IR SD45D-COMBO, R/O ROLLER-VIB-SD 5T 54”, S/N 183045, UNIT #564018 ................................................$26,192

540/309-1709

SCISSORS

2004 GENIE GS1930, SCISSOR LIFT-15-19' DC, S/N GS300464946, UNIT #506376........................................$3,864 2005 JLG 2032E2, SCISSOR LIFT-20' DC-30-34", S/N 0200138716, UNIT #580396 ..........................................$4,307 2005 GENIE GS2032, SCISSOR LIFT-20' DC-30-34", S/N GS320576098, UNIT #581686 ................................$4,884 2004 SKYJACK SJIII-3226, SCISSOR LIFT-26' DC-30-32", S/N 272214, UNIT #515905 ..................................................$4,998 2005 GENIE GS2646, SCISSOR LIFT-25-26' DC-46-68", S/N GS460563998, UNIT #564334........................................$6,006 2005 SKYJACK SJIII-4632, SCISSOR LIFT-30-34' DC-46-69", S/N 711485, UNIT #541377............................................$9,216

FORKLIFTS

2005 DAEWOO G25E, IND FORKLIFT-5000 LB, S/N GA00539, UNIT #563670 ..............................................................$10,476 2004 DAEWOO D35S, IND FORKLIFT-8000-9000 LB, S/N FZ00026, UNIT #513074 ..............................................$16,544 2004 GEHL RS5, RCH FORKLIFT-6000 LB 20-34', S/N RS5JV1211568, UNIT #539392....................................$19,820 2006 TEREX TX55-19, RCH FORKLIFT-FXD-5000 LB 18-24', S/N TX551913584, UNIT #613578 ...............................$25,025 2004 GEHL RS6, RCH FORKLIFT-6000 LB 35-39',S/N RS6JV0813119, UNIT #528082....................................$23,227 2004 LULL 644E-42, RCH FORKLIFT-6000 LB 40-45', S/N 0160003168, UNIT #484162 ........................................$27,390 2004 GRADALL 534D9-45, RCH FORKLIFT-9000 LB 35-45', S/N 0160003937, UNIT #499455 ........................................$30,827 2005 GEHL DL8L-42-CAB-HTR, RCH FORKLIFT-8000 LB 3545', S/N 8L42JW0135516, UNIT# 541583 ..................$36.010 2004 SKYTRAK 10054, RCH FORKLIFT-10000 LB 40-55, S/N 0160004344, UNIT #508084 ........................................$39,816

2005 BOBCAT S220, SKIDSTEER LOADER-1851-2200 LB, S/N 526215460, UNIT #590851 ........ .................................... $15,711

2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000, S/N 5593138, UNIT #581593............ $7,391 ........................................$

2003 DEERE 200CLC, EXCAVATOR-42-48.9K LB-TRACK, S/N FF200CX504633, UNIT #480043 $42,820 ....................................$

2004 DEERE 550H-LT CRAWLER DOZER, 75-84HP-STD TRACK, S/N T0550HX937358, UNIT $32,301 #512419........................$

2004 JLG G9-43A, RCH FORKLIFT-9000 LB 35-45', S/N 0160003850, UNIT #505796 ...... $30,275 ......................................$

2005 IHI 35N MINI EXCAVATOR, 10-10.9' DEPTH, S/N WM000642, UNIT #545200 ...... $18,888 ....................................$ ©2009 RSC Equipment Rental Inc.

518/456-1445 Fax: 518/456-8600 www.contractorssales.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 33

USED TRUCK & EQUIPMENT SALES 1361 Conshohocken Rd., Plymouth Meeting, PA 19462

(610) 277-0100

HYDRAULIC EXCAVATOR

BUCKET TRUCK

Made in the USA

REDU CED!

1999 Chev 3500, Insulated Boom, 1999 CASE 9010B, Aux. Hyd, 2985 Hrs ........................................$47,500 31,580 Miles ..............................$17,900

DUMP TRUCK

BOOM TRUCK

2001 Sterling, 3126 Cat-8 Speed, 64,000 GVW ..........................$39,500

2000 Volvo WG64 National w/100 Boom, 45,860 Miles..............$59,500

PREMIUM QUALITY USED EQUIPMENT New Terex TX760B T/L/B, Cab, 4WD, Extend-a-hoe $54,500 • 0% 48 Financing NEW Doosan DX140 Excavator, 36” Bkt..................................................$$79,900 NEW Doosan DX180 Excavator, 42” Bkt ..................................................$$99,900 2008 JD PR84B (Harley) Power Rake, 7’ Width, Power Angle, Skid Steer Mount, (Like New) ....................................................................................$$4,995 2006 Doosan Solar 140LC-V 9’10” Arm, Blade - 36” Bkt, 2500 Hrs ......$$52,900 2006 Doosan Solar 140LC-V 9’10” Arm - 36” Bkt, 1350 Hrs..................$$49,900 2006 Daewoo Solar 225LC, V Excavator, Rental Return, 48” Bkt, Hyd. Thumb, 49,000 lbs, 765 Hrs ................................................................................$$89,900 2005 Daewoo Solar 75 17,000 Lbs, 1000 Hrs, New Tracks, Blade/Thumb .......... ................................................................................................................$$39,900 2004 Terex TX760B T/L/B, Cab, 4WD, Extend-a-hoe, 2800 Hrs ..............$$20,900 2003 Komatsu D41E-6 Advance Boss, 1285 Hrs, OROPS, Pat Blade, Like New! ................................................................................................................$$48,900 2003 Alamo (McConnell) PA93M, 3pt. Hitch Boom Mower, 15’ Reach, 48” Brush Head, Mid Cut Dipperstick, Excellent Condition ............................$$13,900 2002 Dresser TD9HLGP 24” Pads, 3000 Hrs ..........................................$$28,900 1991 Case IH 595 Tractor/Loader, 2WD, ROPS/Canopy ............................$$8,500 1991 Ford 445 Tractor/Loader, Cab, 4200 Hrs ..........................................$$4,295 1971 Case 970 Ag Tractor, 2WD, Cab, 90 PTO HP, New Rubber, Low Hrs, Clean Unit ..............................................................................................................$$6,500 1971 Bush Hog Heavy Duty 15’ Batwing Mower, Good Condition ............$$3,500 Daewoo Mega 200V Loader, 2 1/2 Cu. Yd. Bkt, 25,000 Lbs, 137 HP, 17.5-25 Radials, Rental Return, 955 Hrs ..............................................................$$69,900 7’ Sweepster Dual Motor, Drive Broom, Mtg. Kit for JD 5400/5410/5420 Series Buy This One For $5,995 Tractor, Like New, Replacement Cost: $9,000 ..............B COMPACT CORNER 2006 Terex HR37 Mini Excavator, 1050 Hrs, Enclosed Cab, Zero Tak Swing, 24” Quick Hitch Bucket ..................................................................................$$24,900 2005 JD 4520 Tractor/Loader, Power Reverse Trans. Turf Tires, 1500 Hrs .......... ................................................................................................................$$18,900 2003 JD 1435 Front Mower, 72” Deck, 4WD, Cab ....................................$$3,995 1991 Jacobsen D4220 Front Mower, 72” Deck, 2 Stage Snowblower ......$$1,995 1985 JD 1050 2WD, Turf Tires ..................................................................$$3,995

DOOSAN • Loaders/Excavators TEREX • Loader/Backhoes Available For SALE/LEASE/RENT OR RENTAL PURCHASE NEW 2010 DOOSAN EXCAVATORS - DX 140/DX 180

SALES • SERVICE • PARTS • RENTALS Rt. 9, Livingston, NY (10 Mi. S. of Hudson) (518) 537-6221 Fax: (518) 537-5276

31 North Broadway Red Hook, NY (845) 758-8888 Fax: (845) 758-8887

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

SEAL SAVER PROTECTIVE CYLINDER COVER Stop the never ending cycle of cylinder repairs and avoid costly equipment downtime with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER protects seals and cylinder rods from premature failure extending the life of your equipment by preventing the ingression of contaminants into the hydraulic system. This unique preventative maintenance tool attaches easily and securely to the rod and cylinder head—usually in fifteen minutes or less—with no disassembly of the cylinder required.

The SEAL SAVER* WILL: Eliminate rod scoring

• Extend the life of cylinder seals • Protect cylinders from the elements • Prevent pitting due to chemical washes • Reduce particle contamination of hydraulic systems • Minimize dings and dents associated with falling debris *Patented

SEAL SAVER has proven effective in Recycling, Construction, Mining, Rock Quarries, Waste Management, Refineries and Wood Products industries.

Exclusively manufactured by:

Fluid Control Services, Inc.

1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

Page 34 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE MODEL 1070

LARGEST SPECIALIZED FLEET IN NORTH AMERICA

RENTING NATIONWIDE

>1-2(9786-)7 '31

EXCAVATORS 16,000 LB - 180,000 LB

2080

2100

3100

3120

2’ x 7’

2’6” x 8’

2’6” x10’

3’ x 10’

3’ x 12’

MODEL 3140

4120

4140

4160

4180

4200

4’ x 12’

4’ x 14’

4’ x 16’

4’ x 18’

4’ x 20’

SIZE

SIZE

3’ x 14’

FRONT

SERIES 4000

FREE JOB SI CONSU TE LTATIO N

D ETA I L

B A CK Adjustable rubber cutting edge.

Easy tie down plates.

3/8” side plates.

Offered in scoop in, quick attach.

Hardened skid plates.

SERIES 1000 Model 1070

On our *4140, *4160, *4180, *4200 models an additional bottom brace, 2 x 3 1/4 sq tubing was added for additional strength for those extra heavy jobs.

SERIES 3000 Model 3120 FRONT

SERIES 2000 Model 2080 F R ONT

2nd and 3rd Member Mounted ROTATING SHEARS HIGH REACH and HD-XTENDED REACH DEMO UNITS ULTRA LONG REACH FRONTS

LaBounty

FRONT

,SWXIV 6SEH 7IRIGE *EPPW 2=

4LSRI *E\ 4 L

*

[[[ WIRIGEMVSR[SVOW GSQ WEPIW$WIRIGEMVSR[SVOW GSQ

HAMMERS - 3,000 LB - 13,500 LB UNIVERSAL PROCESSORS CONCRETE PULVERIZERS GRAPPLES AND BUCKETS TRANSPORTATION AVAILABLE

DRIVE YOURSELF TO THE EDGE WITH REESE WETLAND CROSSING MATS

www.newmillenniumrentals.com

1-877-667-1998

We’re in the business of eliminating obstacles.

DEMOLITION RECONSTRUCTION ENVIRONMENTAL RECYCLING

RENT WHAT YOU NEED. BUY WHAT YOU WANT. Rent the right attachment for the job!

New Your Attachment Rental Specialist Millennium Rental s, Inc.

AUTHORIZED DISTRIBUTOR

Member: The Brotherhood of Operating Engineers Member: National Assoc. of Demolition Contractors Peter E. Menner, President

• Installations • Rentals • Sales • Reduce access road construction costs by up to 75% • Build to the water’s edge

K.W. Reese, Inc. • Box 298 Mercersburg, PA 17236 (717) 328-5211 • Fax: (717) 328-9541 www.kwreese.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 35

Steel Jaws (2nd/3rd Member) Concrete Pulverizer (Mechanical/Manual) Grapples Clamshell Buckets (w/Rotation) Tampers (Allied) NEW ADDIT IONS C at 308 with Magnets Rubber Trac ks L o n g Reach Exca Auger Drives vator with A t t a c h ments Universal Processors Concrete Crusher Cutter Hammers 2,000ftlbs -12,000ftlbs Long Reach Excavators (w/Attachments) Miscellaneous Rental Equipment (Track Loaders, Trucks, Motor Graders, Rollers)

Page 36 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

-./ 012234 567#8'#9:6;<=;>65 ?@A-B/? C?@A/ D.B4.@ 2-@@3?44

+H\ 'HDOHUV ,W·V 7LPH WR 5HJLVWHU

5RRPV DUH ÀOOLQJ XS ² ERRN \RXU ORGJLQJ DQG WUDYHO ZKLOH UDWHV DUH ORZHVW QRZ $(' URRP UDWH H[WHQGHG WLOO 'HF 5RRP UDWH DIWHU 'HF

!!!"#$%&'(()*"+,(

CALL: 603-623-3669

0DLQVWDJH (YHQW )ULGD\ -DQ 0LNH 0DUNV KRVWV DQRWKHU $(' H[FOXVLYH SDQHO GLDORJXH

7KH )XWXUH RI 'LVWULEXWLRQ IHDWXULQJ 0RQW\ %R\G

3UHVLGHQW DQG &(2 :KD\QH 6XSSO\ &R DQG :DONHU 0DFKLQHU\ &R

3DWULFN )LVKHU

9LFH 3UHVLGHQW &RQVWUXFWLRQ 'LY 7LWDQ 0DFKLQHU\ ,QF

'DYH *ULIÀWK

3UHVLGHQW DQG &(2 0RGHUQ *URXS /WG

1HLO 0DQQLQJ

3UHVLGHQW DQG &(2 :DMD[ ,QFRPH )XQG

-D\ 3DUDGLV

&KDLUPDQ %UDQGHLV 0DFKLQHU\ 6XSSO\ &R

$VVRFLDWHG (TXLSPHQW 'LVWULEXWRUV _ +XQWHU 'U 6WH _ 2DN %URRN ,OO _ ZZZ DHGVXPPLW FRP

CRANE MATS NORTHEAST, LLC Hudson Falls, NY 518.792.4708 www.cranematsnortheast.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 37

We Proudly Represent the Full Line of Terex Cranes and are Able to Offer You the LARGEST INVENTORY IN THE COUNTRY!!!

New and Used

Call us today for your best pricing!!

Terex APR - New England Territory - NY, MA, RI, CT, ME, VT, NJ, NH

Fully Staffed Parts Department to Service All of Your Requirements.

SALES • SERVICE • PARTS Authorized Terex® Distributor

SYRACUSE, NY 315-458-4101

BOSTON, MA 508-868-7734

NEW JERSEY / NYC 315-663-4043

www.empirecrane.com

sales@empirecrane.com domestic.craneparts@empirecrane.com international.craneparts@empirecrane.com

www.terex-cranes.com

Page 38 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kim Foley Joins Injured Marine Semper Fi Fund Board General Alfred M. Gray Jr., 29th Commandant of the well as members of the Army, Air Force or Marine Corps and chairman of the board of the Injured Coast Guard who serve in support of Marine Marine Semper Fi Fund, recently welcomed Kim Foley to forces. the board of directors of the organization. Foley is chairman They have full-time staff at Bethesda, Walter of the board of Foley Incorporated, the Caterpillar dealership Read, Brooke Medical Center and Balboa. The serving northern New Jersey, Staten Island and Bermuda. fund had its genesis in April 2003, at the Naval Foley served in the United States Marine Corps as an offi- Hospital, Camp Pendleton, Calif. when a regiscer from 1967 to 1971. While in Vietnam, he was a platoon tered nurse and spouse of an active duty Marine commander, and company commander for various units of saw firsthand the challenges faced by wounded the 1st Marine Division. Since 2004, Foley has been visit- Marines and sailors as they returned from ing wounded soldiers at Bethesda Naval Hospital.

Operation Iraqi Freedom. She, along with a ded“Meeting these wonderful young men and women had icated group of military spouses and hospital been an inspiring experience. In every case these young employees, began to organize Welcome Home Marines and sailors are eager to return to their units, and activities at the hospital. By May 2004, the active duty. Most of the wounded I have visited have been under 25 years old and on their 2nd, if not 3rd, deployment,” Foley said.

Foley’s basic officer’s class, which started in June of 1968, initially donated special Marine warm-up suits to patients at the hospital, in memory of their fellow classmates killed in Vietnam. Foley Inc. has since provided more than 3,000 additional suits. In addition, both Foley Inc. and the Foley family foundation sponsor Team Semper Fi, which is a group of wounded Marines who compete in endurance athletic contests.

The Injured Marine Semper Fi Fund (IMSFF) is a 501(c)(3) nonprofit organization set up to provide immediate financial support for injured members of U.S. Armed Forces and their families. They direct urgently needed resources to Marines and sailors, as Team Semper Fi.

Wounded Marines compete in endurance athletic contests as Team Semper Fi.

IMSFF was incorporated in California. Since establishment, the organization has issued more than 23,000 grants totaling more than $43 million to thousands of soldiers and their families.

For more information, visit www.semperfifund.org.

Transportation Leaders Release Caterpillar’s New CEO Adds Statement on Deficit Proposal Board Chairman to Title Leaders from a diverse coalition of transportation interests Nov. 10 released the following statement: “We applaud the draft proposal released [Nov. 10] by the National Commission on Fiscal Responsibility and Reform co-chairs to increase the gas tax by 15 cents to support vital transportation infrastructure improvements. This preliminary recommendation is bold, but necessary, and our organizations urge commission members to support its adoption as part of its report to Congress and the President.

“This proposal recognizes the integral relationship between improving transportation infrastructure, economic health and fiscal responsibility. If enacted, it will help prevent economically devastating cuts in federal infrastructure investment and remove the primary obstacle to passage of a multimodal surface transportation reauthorization bill.

“The issue of transportation investment is directly linked to balancing the federal budget. Without new Highway Trust Fund revenue, policymakers will be forced either to impose highway and transit program cuts that would reduce payrolls and impede economic growth; or add an estimated $34 billion over the next six years to general fund spending. Either outcome undermines efforts to balance the budget.

“It is also important to recognize that a small number of transportation programs are currently funded with general funds, and those programs meet important needs and should be continued.

“We are grateful for the leadership of Sen. Tom Carper [D-Del.] and Sen. George Voinovich [R-Ohio] on this issue and look forward to working with the commission, Congress and President Obama to resolve our federal budget challenges and support vital infrastructure investment.”

V i s i t C E G ’s W e b S i t e a t

w w w. C o n s t r u c t i o n E q u i p m e n t G u i d e . c o m

PEORIA, Ill. (AP) Caterpillar Inc.’s new CEO Doug Oberhelman is now also chairman of the board of the world’s largest maker of mining and construction equipment.

Oberhelman became chairman Nov. 1 following the retirement of Jim Owens.

Oberhelman became chief executive in

July as part of a planned succession before Owens’ retirement. Oberhelman has worked for the Peoria, Ill. - based company since 1975.

Owens, who served as the company’s top executive from 2004 to this year, worked for Caterpillar for more than 38 years.

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today!

Toll Free 800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 39

BRANDON Truck Body Depot We Are Overstocked!!!

Clearance Sale

Financing & Leasing Available

We Install Full Line of Accessories

Truck Body Specialists LLC

$200 OFF All Cash & Carry Truck Bodies!!!

$250 OFF All Truck Body Installations!!!

87 81

Rt. 12 South Canal Street • PO Box 920 • Oxford, NY 13830

CALL: 603-623-3669

1-866-237-9885

www.chenangotruck.com chenangotruck@frontiernet.net

Syracuse

90

Utica

12

Oxford CHENANGO

Ithaca

81

!

Albany 90

Oneonta 88

Binghamton

87 84

87

Page 40 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RANSOME CAT LOCATIONS CAN NOW SERVICE YOUR COMMERCIAL AND TRUCK ENGINES TOO! www.ruddequipment.com Construction Equipment Guide Special Pricing...

Say You Saw it in CEG!

Albert Medcalf Office: (502) 456-4050 Cell: (502) 592-6510

Whitehall Allentown

Now Ser ving You with 13 Locations including Ohio.

Fleetwood

P E N N SY LVA N I A Bensalem N E W West Chester

JERSEY

Hammonton Bear

Euclid R170’s Completely Rebuilt, 2 Available!

Call for Details.

2005 EH1700, s/n 77536, Work Ready.

Call for Details.

DE

1-800-753-4CAT www.ransome.com

1997 JCB 411B, s/n 527497, Clean Machine.

Call for Details.

2008 BL70, s/n 11353 with Less Than 2000 Hrs. Call for Details.

1998 A40, s/n 60198, 12,460 Hrs. Call for Details.

2007 A30D, s/n 74320, with Less Than 3000 Hrs. Call for Details.

MG Rentals Thinking of SNOW? Special SNOW Rates CAT Loaders 938-G 950-G IT938-G Loader Backhoes Skid Steer High Flow Also for Rent:

2002 A40D, s/n 60221, 7935 Hrs. Call for Details.

2001 A40D, s/n 60056, 11,535 Hrs. Call for Details.

Excavators, Dozers, Vibratory Roller, Hammers, Screeners, Art. Truck, 24x36 Track Crusher Call: Phil 413-427-7171 (Cell) Ans. Service: 413-739-9486 Springfield, Massachusetts

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 41

100 + Pieces of Equipment in Stock

Brookside E Q U I P M E N T S A LE S CONSTRUCTION EQUIPMENT & TRUCKS

888-763-4656 978-249-4600 tim@brooksideequipment.com 60 State Rd. , Rt. 2A Phillipston, MA 01331

Call or check out our website: w w w. b ro o k s i d e e q u i p m e n t . c o m

2 0 0 5 B o b c a t 3 2 3 J ; good rubber, blade, swing boom, aux hyd, track & blade extension, Kubota diesel, 353 hours, $11,500 stk# 153 ..........................................................................$

2 0 0 2 C a t 9 2 8 G ; 3 yard, ride control, a/c, jrb coupler, $53,500 9,619 hours, stk# 751 ..................................................$

2 0 0 1 B e n fo rd 6 0 0 0 A P N D u m p e r ; 6 ton capacity, 4x4, $14,500 perkins 4 cyl, good rubber, stk# 083 ........................$

2 0 0 5 Ko m a t s u W B 1 4 0 - 2 ; 4x4, std hoe, pilot controls, $29,900 a/c, 2,957 hours, stk# 718 ..........................................$

1 9 9 6 C a t D 8 R ; cab w/ air, very good u/c, new pads, plumbed for ripper (comes w/ blade, removed for trans$98,500 port) stk# 417................................................................$

1 9 9 4 Ko b e l c o S K 1 2 0 L C ; good u/c, narrow pads, cou$23,500 pler w/ wrist, 27k lbs, 3,713 hours, stk# 180..........$

2 0 0 3 J L G 4 5 0 A J ; 45 foot artic. boom, jib, 4x4, 0 tail, good rubber, dual fuel, Ford eng., 2,919 hours, stk# 549 .... $16,500 ..........................................................................................$

2 0 0 8 Jo h n D e e re C T 3 2 2 ; cab w/ air, hydraulic coupler, $23,500 3,200 lb lift capacity, 2,213 hours, stk# 502 ............$

1 9 9 7 Ko m a t s u P C 4 0 0 L C - 6 L C ; good u/c, wide pads, $38,500 recently rebuilt engine, stk# 462 ..............................$

1 9 9 5 G e n i e S 8 0 ; 80 foot, 4x4, axle extension, Deutz $14,500 diesel, good rubber, stk# 147......................................$

1 9 9 6 H a m m 2 3 2 0 D ; 66" smooth drum, drum drive & $16,500 vib., good rubber, Deutz diesel, stk# 879 ................$

1 9 8 5 Ko m a t s u D 6 5 E - 8 ; very good undercarriage, lever steer, straight blade w/ tilt, 40k lbs, 6,480 hours, stk# 453.. $25,500 ..........................................................................................$

1 9 8 7 C a t G 9 3 6 ; 3 yard, ACS coupler, 17.5-25 rubber, $37,500 4,990 hours, stk# 125 ..................................................$

1 9 7 2 C a t 9 2 0 ; new engine, 48" forks (no bucket), 17.5$19,500 25, good rubber, stk# 571 ..........................................$

1 9 9 0 Jo h n D e e re 6 4 4 E ; 3 yard bucket, 160 hp, 34k lbs, $27,500 stk# 360 ..........................................................................$

2 0 0 5 Jo h n D e e re 6 2 4 J ; 4.5 yard JRB bucket, ride con$69,900 trol, a/c, good rubber, 8,027 hours, stk# 812..........$

1 9 9 0 Tro j a n 2 0 0 0 Z ; 3 yard, Deutz diesel, radial rubber, $17,500 stk# 602 ..........................................................................$

1 9 9 7 Fo rd F - S e r i e s U t i l i t y Tr u c k ; enclosed body, automatic trans., Cummins 5.9, 24,500 lb gvw, good $4,750 rubber, 68k miles, stk# 560............................................$

1 9 8 9 I H S 2 5 0 0 Tr i a x l e D u m p ; 18k f, 20k p, 44k rears, 17 foot steel body, NTC 400 hp, jake, Hendrickson susp., $14,500 hitch w/ air, 232k miles, stk# 924 ..............................$

1 9 9 4 M a c k R D 6 9 0 S 1 0 W h e e l D u m p ; EM7 300 hp, 7 speed, 16k f, 44k rears, 16 foot steel body, double frame, $19,900 a/c, 396k miles, stk# 807..............................................$

The Area’s Largest Selection of USED CONSTRUCTION EQUIPMENT

Page 42 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DOZERS

DEPENDABLE

2006 N.H. D75 Crawler Dozer w/ Wide Track, Cab, 1159 Hrs ........ ............................................................................................$54,875 2006 N.H. D95 Crawler Dozer w/ Wide Track, Cab, 1001 Hrs ........ ............................................................................................$80,875 New Holland Construction Equipment is built tough to handle the most demanding jobsite conditions.

Rugged construction, reliable engines, less downtime and service is a snap.

See us today for a demonstration.

WHEEL LOADERS

2006 N.H. W130 Wheel Loader, 401 Hrs ........................$109,000

EXCAVATORS

2007 Excavator w/ Cab, Blade, Rubber Track, Hyd. Thumb$57,000 2009 N.H. E35B, Cab, Blade, Rubber Track, Hyd. Thumb, 391 Hrs.. ............................................................................................$33,280 2009 N.H. E50B, Cab, Blade, Rubber Track, Hyd. Thumb, 210 Hrs.. ............................................................................................$58,800 2009 N.H. E135B SR Excavator w/ Cab, Dozer Blade, 596 Hrs ...... ..........................................................................................$155,000 2007 N.H. E70SR Excavator w/ Cab, Blade, Steel Track & Hyd. Thumb, 383 Hrs ..................................................................$87,250

SKID STEERS

(2) 2009 N.H. L170 Skidsteer, OROPS, 72” Bucket, Around 600 Your Choice $19,900 Hrs, Still has Warranty....................................Y 2004 N.H. LS160 Skidsteer, Cab w/ Heat, 1875 Hrs..........$13,900 2006 N.H. LT185.B Track Skidsteer, OROPS, 25 Speed, Hyd. Mounting Plate, Aux. Hyd, 631 Hrs ....................................$34,000 2007/2008 N.H. C185 Track Skidsteers, Cab, Heat/AC, Pilot, 84” Bkt, 630 Hrs .................................................. Your Choice $46,250

ATTACHMENTS 2004 Harley 6’ Power Rake, Skidsteer Mount, Like New ....$6,495 2008 Sweepster 84” Angle Broom, Skidsteer Mount, Like New...... ..............................................................................................$2,395 2010 Bradco 6”x4’ Trencher, Skidsteer Mount, Like New ....$3,995 2009 Edge 78" Hi Flow Skidsteer Mount Rotary Cutter ......$4,995 VARIETY OF BUCKETS ......................................STARTING @ $295 2006 FFC 60" Skid Steer Snow blower w/electric swivel, Like New ......................................................................................$3,000

C A P I TA L T R A C T O R I N C .

1135 State Rt. 29, Greenwich, NY 12834 518/692-9611 FAX 518/692-2210 Since 1966 www.capitaltractorinc.com

PROVEN POWER FOR LESS MONEY...

Rental tractors from Hoober

Hoober offers extremely affordable rental and lease purchases on Tractors and Scrapers, backed by excellent Hoober service.

CRANE E RENTALS Serving g the e Greaterr Hudson n Valley,, NY Y area a with

HYDRAULIC C TRUCK K & ALL L TERRAIN N CRANES For more details and quotes call Charlie Hoober or Larry Herr.

800-732-0017 or 717-768-8231

35 5 To o 275 5 Ton n Capacity VERY Y COMPETITIVE OPEN N SHOP P RATES KINGSTON,, NY

845-336-4100

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 43

Rock Solid Performance

C175 Track Loader · 60 HP · Operating Wt. 7,535Lbs · Rated OP Cap. 3,150Lbs

USED EQUIPMENT AT DOWN TO EARTH PRICES

NH LT185.B | $26,900 1250 Hours, 78HP turbo diesel, two speed transmission, cab enclosure with heater/ defroster, suspension seat

KU RTV1100 | $13,900 22 Hp Diesel, 4 Wheel Drive, Enclosed Cab With Heat and Air, Radio, Worksite Tires, Hydro Dump Bed, 440 Hours

Skid Loaders JD 260 2001 year, 69hp Bobcat 642B (A) 6132 hrs NH L250 Only 114 hours,18hp CASE1830 Skid Loader,30hp NH L555 2131hours,1987 yr.

CASE450 4488 hours, 2006 NH L785 3443 hours, 1993 CASE 60XT (A) 1888 hours NH LS120 (A) 75 hours,18hp CASE 70XT 3692 hours,2002 NH LS125 840 hours Ford CL40 2206 hours, gas NH LS160 2240 hours,2003 IH 4130 Onan gas NH LS180 2204 hours, 2001

Hanson $2,995 6ft Snow Blower, mounts to fit older New Holland L550 & L780 series skid loaders, standard flow hydraulic drive

NH LS185.B (2) NH LS190 4441hrs, 82hp NH LX985 5650 hours, 1999 Track Loaders CAT 277B 1050 hours, 2005 NHC185 347 hours, 2007year NH C190 1300 hours, 90hp NH LT185.B (2)

Bandit 200 $9,800 Model 9” Chipper, 2485 hours, Perkins diesel, recent new starter & battery, knives 80%, pintle ring hitch

Industrial TLBs Ford 655A (A) TLB, 4200 hrs NH 675E TLB, 3100 hours Industrial Equipment Bandit 200+ Brush Bandit CASE W14 CAT 944 4WD Wheel Loader Hyster S80 straight mast

Visit us on the web at www.messicks.com to view our huge inventory of used equipment

“a helping hand with ith your o r land”

www.messicks.com

187 Merts Drive

( Rte 283 Rheems Exit)

800-222-3373

Elizabethtown, PA 17022

AP WRITER

CONCORD, N.H. (AP) New Hampshire is getting more than $2 million in federal stimulus funds to study a $300 million highspeed rail corridor project from Boston to Nashua and on to Concord, U.S. Rep. Paul Hodes announced Oct. 25.

Hodes said the rail project is important to New Hampshire’s economy.

“This is the completion of the critical first step in the build-out,” he said. “I think it’s highly unlikely we would not want to move forward.”

Hodes — a Democrat who is running for U.S. Senate — said the funding source points out the difference between him and his opponent in the Nov. 2 election.

Republican Senate candidate Kelly Ayotte opposes stimulus funds.

Ayotte spokesman Jeff Grappone said the United States doesn’t need a “bloated, wasteful stimulus package to examine the feasibility of commuter rail.”

Grappone said Ayotte believes in strengthening the state’s infrastructure but wants to ensure the rail project “doesn’t have to be

1992 CAT 966F

FOAM FILLED TIRES, 10,687 HOURS $72,500

2005 CAT 314C LCR 2,780 HOURS

$58,900

PRICE REDUCED

7481 Lincoln Highway East Abbottstown, PA 17301

N.H. to Get $2M From Feds to Study High-Speed Rail Project

By Norma Love

Used Cat Equipment Surplus Inventory

propped up by taxpayers for decades to come.”

Mike Pillsbury, New Hampshire’s deputy transportation commissioner, said the study will provide answers to necessary questions before moving ahead with the engineering and construction phases of the project.

“It really answers the questions: Is this feasible? Is there enough capacity there? Are there enough riders?” he said.

The project — called the capital corridor — calls for train stations in Concord, Manchester and Nashua, as well as at Manchester-Boston Regional Airport in Manchester.

Pillsbury estimated the study will take 18 months once a consultant is hired. Hiring an engineering firm to conduct the study could take several months, he said. Pillsbury said the study not only should show the benefits of having the high-speed rail connections, it also should show what needs to be done to provide the services.

He was optimistic the study would be the first step to winning future funding to complete the project.

The rail line being studied currently is a freight line.

2004 CAT 345BL (SERIES II)

2002 F550 FORD UTILITY

$165,000 $180,000

$52,500

7,883 HOURS

2004 CAT M315C 6,467 HOURS

$69,500

GREAT DEALS

61,511 MILES

2005 CAT D5GXL 1,638 HOURS

$62,500

Specializing in Heavy Equipment Rentals

Visit us on the web at www.Tomcon.com

914-699-4400

Page 44 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

December 10th, 10am-2pm: Walsh Equipment Inc, 796 Unionville Rd. Prospect PA, 16052 Please join us December 10th and be one of the first to see JCB’s newest generation of skid steer loaders. With all the safety issues confronting companies like yours, JCB has produced a skid steer that will help reduce or eliminate worker compensation claims arising from entering and exiting current competitive machines. JCB’s newest skid steer also offers unparalleled visibility practi-

cally 360 degrees around the machine. In loading and road work, JCB has considered the safety of your operators and those around them and dramatically improved on the old way of doing things. If you are able to share some of your valuable time with us, I am confident we can introduce you to and impressive machine that will help improve your business and employee safety.

Sincerely, Charlie Walsh Walsh Equipment Cell Number: 724-496-4065 charlie.walsh@walshequipmentinc.com

CALL: 603-623-3669

Maine, N.H. Governors Ink Bridge-Funding Study KITTERY, Maine (AP) Two months after a rusted chunk of metal plummeted from the 87-year-old Memorial Bridge spanning the border of Maine and New Hampshire, governors of the two states Oct. 5 set into motion an effort to find money to upgrade it and another aging bridge over the Piscataqua River.

Maine Gov. John Baldacci and New Hampshire Gov. John Lynch signed executive orders that create a task force to come up with as much as $300 million Baldacci said is needed over the next several years to upgrade the bridges, which accommodate a critical commercial and social link between the two states.

New Hampshire has long insisted on replacing the bridges, but Maine kept open an option of removing Memorial Bridge.

For the first time, Baldacci on Oct. 5 gave his support for replacing the Memorial span, even though a study that will advance several options for the bridges

has not yet been completed.

“It’s clear to me that we must replace the Memorial Bridge,” said Baldacci. “I know that the study needs to be completed and public comments considered, but I recognize how important the Memorial Bridge is to Kittery and Portsmouth. The replacement of the bridge has to be part of any plan that I would support.”

Both governors’ executive orders recognize the need to replace the Memorial Bridge and to replace or significantly rehabilitate the Sarah Mildred Long Bridge. Both also recognize the need to maintain the much newer Piscataqua Bridge, which has been carrying Interstate 95 traffic since 1972.

The task force, which includes transportation officials and business representatives from both states, is to issue a report

by Dec. 15.

Few dispute the importance of the bridges.

Memorial Bridge, built in 1923, links the business and social centers of Kittery and Portsmouth in addition to being the only pedestrian and bicycle crossing of the river. The Sarah Long Bridge, built in 1940, includes a rail line serving Portsmouth Naval Shipyard, which employs 4,200 people, as well as heavy truck traffic using commercial service stations in the area. It also serves as a backup route in the event of a closure or detour from the I-95 bridge.

In his order, Baldacci said the bridges “are essential to the movement of people and goods between and through the two states.” They also are the primary travel route between population centers in states to the south and Canada, it said.

The need to address the deterioration of the bridges was highlighted in late July when the captain of a tour boat in the Piscataqua River said a piece of Memorial Bridge plunged into the river. The captain,

Bob Hassold, said the chunk that was 4 ft. in diameter almost hit his boat, which was carrying four people.

The bridges’ condition spawned an activist group, Save Our Bridges, and has become an issue in Maine’s five-way governor’s race. Baldacci, a Democrat, could not seek re-election because of term limits.

Maine officials have been awaiting the completion of a study that will recommend several options for replacing or maintaining the Memorial and Long bridges. After some delays, the report is now due out in November.

Maine and New Hampshire worked together on an unsuccessful bid to obtain federal economic stimulus funds to cover the costs of the bridge projects. The new task force will enable the states to identify joint funding mechanisms and propose legislation in each state that may be necessary to secure funding.

V i s i t C E G ’s We b S i t e a t w w w . c o n s t ru c t i o n e q u i p m e n t g u i d e . c o m

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 45

JOSEPH EQUIPMENT COMPANY

SATURDAYS

WE ARE OPEN ALL DAY

NEW TEREX TXC225LC-1, 47,000 LB, A/C, HEAT, 36” BKT, DAEWOO PWR, 31” PADS, ZERO HRS, US MARKET MACHINE, AVAILABLE TO RENT, GRAPPLES AVAILABLE TOO .. ..........................................$$127,500

BUY • RENT • SELL • TRADE • NEW & USED HEAVY EQUIPMENT, TRUCKS & TRAILERS

300 GAY ST • MANCHESTER, NH 03103 603.641.8608 FAX: 603.666.3716

NEW 2009 TEREX TXC 300 LC-2 EXTRA LONG REACH, 0 HRS, FULL WARRANTY, LONG & LONG, A/C, LOADED, 6 TO CHOOSE FROM WITH 0 HRS TO 1700 HRS, FOR RENT, LEASE OR PURCHASE

BY THE DAY, WEEK OR MONTH, AVAILABLE WITH BKT OR GRAPPLE ................

CALL FOR MORE INFORMATION ............C

293 North - Exit 2 Left onto Brown Ave Right onto Winston St. Left onto Gay St. 300 Gay Street on the Right

2007 KOMATSU PC400 LC-7, 3500 HRS, BKT & GRAPPLE, LONG & LONG, ONE OWNER, EXCELLENT SHAPE ..............................................

CALL FOR MORE INFORMATION ....C

2003 CAT 330CL, LONG & LONG, ONE OWNER, NEW PAINT, EXC. SHAPE, 9000 HRS ............................

CALL FOR MORE INFORMATION ....C

CAT 950B WHEEL LOADER, S/N 2000 CAT 330BL, LONG & LONG, 31R01349, ORIGINAL PAINT, 23.5 X LOW HRS, EXC. SHAPE, ORIG. PAINT 25 TIRES, EROPS..............................

CALL FOR MORE INFORMATION ....C CALL FOR MORE INFORMATION ....C

1987 DRESSER TD25G DOZER, FULL CAB, TRIPLE SHANK RIPPER, NEW KT 600 CUMMINS W/600 HRS ON REBUILT W/PAPERWORK, 60% BOTTOM, RESURFACED BLADE W/AR PLATE, A/C, NEW TRUNION BALLS, WORKING DAILY ........

CALL FOR MORE INFORMATION ............C

NEW TEREX TA27 & TZ30 ROCK TRUCKS, 6X6, CUMMINS PWR, AUTOMATIC, 23.5X25 TIRES, FULLY LOADED CAB, IN STOCK

CHAMPION 540P SUPER PAC SHEEP FOOT COMPACTOR, 1200 HRS, EXC. SHAPE, ORIG. PAINT, 1 OWNER ..........................................

CALL FOR MORE INFORMATION ....C

1997 CAT D6R XL, OPEN ROPS, ORIG. PAINT, 60% BOTTOM, 1 OWNER, EXC. SHAPE........................

CALL FOR MORE INFORMATION ....C

1992 CAT 902 WHEEL LOADER, WITH 4+1 BUCKET, FORKS AND BROOM ..........

CALL FOR MORE INFORMATION ............C

2009 KRUZ 38’X102” DEMO/SCRAP TRAILER, TRI AXLE, 80 YR, 89” SIDES, 1/4” HARDOX 450, HUB PILOTED WHEELS, TIRE CARRIER, AIR RIDE OR SPRING AVAILABLE, ALSO 2010 TERMINATOR 26’ STEEL DUMP TRAILER, HD 1/4” AR400, HI LIFT GATE, SINGLE PT OR AIR RIDE, MICHELINS, LED LIGHTS, WE TAKE CUSTOM ORDERS

2002 CAT 980G LOADER, SCALE, L4 TIRES, RIDE-CONTROL, A/C, 10561 HOURS, CLEAN ....................................

CALL FOR MORE INFORMATION ..........C

BRODERSON CARRY DECK MOBILE CRANE, MODEL 1C80-1B, 450 HRS CALL FOR MORE INFORMATION ....C

BIBEAU 18' STEEL HIGH TENSIL DUMP BODY, MODEL: BFLHD 18', 60"/48", 54" GATE, HYDRAULIC RICHARDS CANVAS, PLYWOOD SINCE NEW, SCUTTLE DOOR. COMPLETE - PISTON, HINGE, BRACKETS, TANK, PUMP, HARDOX AR 450, LIKE NEW CONDITION ..................

CALL FOR MORE INFORMATION. ........C

2011 FONTAINE 55 TON LOWBED, 26’ DROP SIDE RAIL, 14.5” LOAD DECK HEIGHT, AIR RIDE, TRI-AXLE, LIFT ON 3RD AXLE, SET-UP FOR FUTURE 4TH AXLE AND OR STINGER, NON GROUND BEARING, STROBE LIGHT PACKAGE, ALUM WHEELS, 270/70R X 22.5 ............

CALL FOR MORE INFORMATION ............C

2011 FONTAINE MAGNITUDE 55MX, 55 TON EXTENDABLE TRAILER, 30’ TO 50’, MODULAR, DETACHES BOTH ENDS, HYD REMOVABLE, NON GROUND BEARING, 20” DECK HEIGHT, WILL TAKE 10’ DECK EXT FOR A TOTAL OF 60’, 275 RUBBER, TRI AXLE, AIR LIFT ON 3RD, SET UP FOR 4TH, SET UP FOR GOOSENECK EXT. CALL FOR MORE INFORMATION ............C

NEW 2010 FONTAINE SPECIALIZED MAGNITUDE 55L, TRI AXLE, AIR RIDE, SET UP OF 4TH AXLE, NON GROUND BEARING, 25’ DECK, LED LIGHTS, ALUMINUM WHEELS, STROBE LIGHT PACKAGE, LIFT ON 3RD AXLE, 2 PIN POSITION, LOADED, IN STOCK NO WAITING ....

CALL FOR MORE INFORMATION ....C

NEW 2011 FONTAINE SPECIALIZED 60 TON DROPSIDE RAIL TRAILER, 26’ WELL, 14.5” LOADED DECK HEIGHT TRI AXLE, AIR RIDE, LONG GOOSENECK, ALUM WHEELS, 275/70RX22.5 RUBBER, SET UP FOR FUTURE 4TH AXLE, NON GROUND BEARING ..................................

CALL FOR MORE INFORMATION ............C

NEW 2010 DORSEY 60 TON 4 AXLE STEP DECKS, TRI AXLES, AIR RIDE W/PIN ON 4TH AXLE, 48’X102”, 12’ UPPER DECK HEAVY DUTY CONS, CUSTOM BUILT, 275/70X22.5 ALUM WHLS, LIFT ON MIDDLE AXLE, WINCHES, WINCH TRACK, IN STOCK CALL FOR MORE INFORMATION ......C

TRADES WELCOME • www.josephequipment.com • www.josephequipment@aol.com • FINANCING AVA I L A B L E

Page 46 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Shawmut Equipment of Canada Inc. is the new dealer for Tadano Mantis Cranes in the provinces of New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland.

Mantis telescoping crawler cranes are heavy duty machines that offer hydraulically extendable crawlers, compact dimensions and quick set up as there are no outriggers to deploy. The Mantis cranes also offer 360 degree pick and carry capabilities and multiple attachments such as work platforms and augers.

Shawmut Equipment was established in 1957 and is a third generation family owned business with locations in Saint John, New Brunswick, Manchester, Conn. and South Easton, Mass. The Mantis telecrawlers will complement Shawmut’s existing product lines including Grove, Manitowoc, National and Potain cranes.

For more information contact 888/5948444 or visit www.shawmutequipment.com.

Shawmut Named Dealer for Tadano Mantis Cranes Shawmut Equipment of Canada Inc. is the new dealer for Tadano Mantis Cranes in the provinces of New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland.

NJ Transit Owes Federal Government $271M Bill for Scrapped Rail Tunnel

By Beth DeFalco

ASSOCIATED PRESS

TRENTON, N.J., (AP) NJ Transit owes the federal government at least $271 million for the Hudson River rail tunnel that Gov. Chris Christie scrapped last month, a federal official said.

The $8.7 billion project to construct a rail tunnel between New Jersey and New York was 15 years in the making when Christie pulled the plug on Oct. 27, citing potential cost overruns.

The Federal Transit Administration on Nov. 8 sent the railroad the bill for the so-called Access to the Region’s Core project.

“NJT must immediately repay all the Federal financial assistance expended for ARC under the [work

agreement] which is currently estimated to be $271.091 million, plus reasonable interest and penalty charges that will be determined by FTA,” regional administrator Brigid HynesCherin wrote in the letter to James Weinstein, executive director of NJ Transit.

FTA also said it would launch an audit of the project to determine how much federal funds have not yet been spent.

The federal government had committed $3 billion to the project along with another $3 billion from the Port Authority of New York and New Jersey. The state’s share was $2.7 billion plus overruns.

The Federal Transportation Administration had agreed to spend $350 million for the tunnel. In the let-

ter, it said it was “deobligating” the remaining $79 million of that commitment.

NJ Transit officials said Nov. 9 the agency would release a statement later. Officials weren’t saying where the state will get the money to pay the bill. However, $1.25 billion of the $2.7 billion the state had committed to the project from toll increases could soon become available.

At least one state — New York — is already going after the $3 billion that the federal government had committed to the Hudson River rail. U.S. Sen. Kirsten Gillibrand, D-NY, has asked Transportation Secretary Ray LaHood to redirect the money to the Long Island Rail Road’s East Side Access Project and the construction of the Second Avenue subway line.

ZZZ 70$WUXFN FRP V isit CEG’s We b S i t e a t w w w. C o n s t ru c t i o n E q u i p m e n t G u i d e . c o m

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 47

Work to Begin on National Mall Levee in Late November

By Jessica Gresko ASSOCIATED PRESS

WASHINGTON (AP) Construction on a new barrier to protect downtown Washington, D.C., and the National Mall from Potomac River flooding during a massive storm will soon be under way.

Officials said Nov. 15 that the $9.6 million levee project, which has been several years in development, will begin in late November or early December.

Built on the banks of the Potomac River, the District of Columbia has always been under threat of river flooding from a major storm. In a review done after Hurricane Katrina in 2005, however, the U.S. Army Corps of Engineers concluded that the city’s flood-control system — built some 70 years ago — was inadequate to protect the city during a major storm.

An updated map of potential flooding drafted by the Federal Emergency Management Agency said museums such as the National Gallery of Art and federal buildings like the Commerce Department could be under as much as 10 ft. of water if the current flood-control measures failed. That triggered planning for a better system.

Downtown Washington is now protected

by a levee that has been in place since the late 1930s. The earth barrier runs parallel to the Lincoln Memorial’s reflecting pool and

Constitution Avenue onto the Mall. If more serious flooding is projected, the existing plan calls for erecting an 8-ft. earthen

The new levee will replace the sandbag barrier with a combination of permanent stone walls and a 12-ft. tall removable metal wall. A permanent wall will be constructed on both sides of 17th Street. prevents water from creeping north into the city. When officials are concerned about flooding, a sandbag barrier also is placed across 17th Street, completing the barrier.

Without the sandbags, water could get funneled up the street and then flow down

embankment with dirt taken from the Washington Monument grounds.

The new levee will replace the sandbag barrier with a combination of permanent stone walls and a 12-ft. tall removable metal wall. A permanent wall will be constructed

on both sides of 17th Street. The removable part of the barrier — posts and metal panels — will normally be stored but will be set up by the National Park Service to block 17th Street if flooding is expected. The levee is only useful, however, to prevent flooding from the Potomac — not if heavy rains hit the area like those in 2006 that flooded the National Archives and other buildings.

Officials last set up the sandbag barrier in 2003 when Tropical Storm Isabel flooded parts of the Washington area, and severe flooding is not unheard of in the region.

“There were floods up through the 1930s and 1940s that literally extended all the way to Pennsylvania Avenue,” said Julia Koster of the National Capital Planning Commission, which approved the levee’s design.

The bulk of the construction on the new barrier is expected to take place in March.

The project is expected to be finished by summer 2011. D.C. officials originally pledged to build an improved levee system by the end of 2009.

FEMA’s updated flood map of the D.C. area went into effect in September, affecting who has to purchase flood insurance. Once the levee is completed, however, the map could be revised.

Page 48 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rick

Woodson

From the Bleachers

ELLIOTT & FRANTZ, INC. KING OF PRUSSIA, PA 450 E. Church Road, King of Prussia, PA 19406 610/279-5200 HARRISBURG, PA 6680 Allentown Blvd., Harrisburg, PA 17112 717/652-5430 DELMAR, DE Rt. 13, P.O. Box 368 Delmar, DE 19940 302/846-3033 JESSUP, MD 10421 Guilford Road, Jessup, MD 20794 410/792-9134 from Washington D.C. 301/725-7394 HAGERSTOWN, MD 105 Oakridge Place Hagerstown, MD 21740 301/733-8100

Might as well start with the bottom line: The Buffalo Bills are 1-8 but are about to show significant improvement the rest of the season after clobbering the Detroit Lions Nov. 14, 14-12. OK, so clobbering is somewhat of an exaggeration, but at least they finally won a game.

That’s right, I am confident that the best is yet to come for Buffalo. And no, I haven’t lost my mind and I’m not on drugs.

Sure, it’s just a gut feeling, but I’m predicting it won’t turn out to be indigestion. Now don’t get me wrong, no way they’ll run the table and finish 8-8, but that number in the win column will change at least a couple of times, maybe more.

Unlike most skeptics out there, I sense something about this Bills team that has been missing since the turn of the century.

Call it attitude, enthusiasm, drive, heart, hustle or whatever, it doesn’t matter.

Yes, the only word missing there is “talent.” There are talent gaps on both sides of the ball, but still, what matters is that the Bills give it their all. They’re not just going through the motion as if they can’t wait for this season to be over. They are hungry, and, after watching pro football up close and personal for almost 50 years now, my guess is a somewhat nourishing meal is on the front burner of the stove.

Start with Bills head coach Chan Gailey.

The players either love playing for him or they are lying through their facemasks. He gets my approval as well, and it has nothing to do with his deep Southern accent. He has shown that he can get a little creative instead of butting his head – and his team’s head – against a brick wall.

That is, he is obviously willing to use a little trickery, deception to move the ball.

Example: Ryan Fitzpatrick’s shovel pass to Fred Jackson, which caught the Lions by surprise and Jackson turned into a 16-yard touchdown.

As for Jackson – 25 carries for 133 yards – he runs as if he is being chased by a Bengal tiger, or he’s chasing a guy who just stole his car. He’s a player.

Fitzpatrick? I’m tired of hearing over and over that he’s a career backup by all those other “experts” out there. OK, so y’all don’t like his beard, but the guy can play. I’m not saying he’s the second coming of Joe Montana, but he’s no J.P. Losman either. Yeah, he throws an interception now and then, but what quarterback in the NFL doesn’t?

Fitzpatrick has thrown 14 touchdown passes, four fewer than New Orleans QB Drew Brees, three fewer than New England’s Tom Brady and two fewer than Indianapolis’s Peyton Manning. And he has completed 59 percent of his passes. Pretty good for a career backup, wouldn’t you say?

As for the other side of the line of scrimmage, when – if? – recently acquired linebacker Shawne Merriman’s calf injury heals and he can play, the defense should be better.

As we look down the tunnel, none of us can be sure if that really is a light, but I think/hope it is. This part of New York needs the Bills to get much better. There were some 17,000 empty seats at the Nov. 14 game. I think they’re on the right track and it is a light and not a train.

Being an eternal optimist, I’m predicting that the Bills, if they stay relatively injury free, will go no worse than 3-4 in their last seven games, winning Nov. 21 in Cincinnati, at Minnesota Dec. 5, and at home against Cleveland Dec. 12. And no, I’m not betting the farm on it, just crossing my fingers, eyes, arms and legs and hoping.

There are those who think the Bills have lost their collective mind by not rolling over and playing dead so they will finish with the worst record in the NFL and have the first pick in the 2011 draft.

That, though, is not what it’s all about.

Anyway, even if they do finish 4-12, that doesn’t mean their only choice in the draft will be some 150-pound wimp who can barely outrun a turtle.

After reading this, you’re probably convinced that I’ll get calls and/or emails from shysters everywhere offering me the “deals of a lifetime.” That is, like the email I received the other day from some dude somewhere in the Middle East eager to give me $10 million. All I needed to do was tell him/her how to access my bank account.

My response? “I was born at night, but not last night, so go away.”

We’ll see, won’t we?

(Rick Woodson is a regular columnist for the “Rochester Business Journal” in Rochester, N.Y., and is the author of “Words of Woodson”, a collection of sports columns, available at www.authorhouse.com and www.thegolftee.net. Woodson’s e-mail address is rwoodson@rochester.rr.com. )

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 49

FINANCING AVAILABLE

286 Central Ave. South Kearny, New Jersey 07032

800-255-5512

Phone 973-589-4100 Fax 973-589-4811 E-mail: info@tes-inc.net Website: www.tes-inc.net

1997 USTC Taxi King 32 Ton, 74.4' Boom, 45' Jib, S/N 400003434, FOB: New Jersey - POR

2008 Elliott L60R 62' Working Height, 40" x 60" Platform, 14' Steel Bed, 2009 Sterling 240 HP, 29,000 GVW, AC FOB: NJ - POR

2008 Elliott G85R 85’ working height, 16’ steel floor, 5900 lb. winch, 40”x60” platform w/jib, 2009 Sterling, 260HP, 33,000 GVWR - POR

1983 Link-Belt HC258 200-ton, 300' main boom-tubular, S/N 28H31668 FOB: New Jersey - POR

2008 Elliott G50F 55’ working height, hydraulic winch, 40”x60” platform, International 4300, 225HP, 6 speed, 25,999 GVW- POR

ADDITIONAL EQUIPMENT FOR SALE

1998 USTC Taxi King FOB: NJ....................................................................POR 1961 HC-78A FOB: NJ..................................................................................POR NEW Kalmar DCD250-12LB FOB: NJ........................................................POR 1998 Kalmar DCD70-40E5 FOB: NJ............................................................POR 1974 Link-Belt HC 218 FOB: NJ ................................................................POR 2005 Shuttlelift 5560B FOB: NJ ................................................................POR 2004 Shuttlelift 3340B FOB: NJ ..................................................................POR 1999 Link-Belt LS 218H FOB: NJ................................................................POR

Authorized Dealer

TRAILER

Paving

SECTION

Both the PF6160 and PF6170 are powered by a 205-hp (153 kW) Tier III-certified Cummins engine.

Volvo Wheel-Mounted Pavers Built for Productivity, Uptime The Volvo PF6160 and PF6170 wheel-mounted pavers are part of the PF6000-Series highway-class asphalt paver line that utilizes global technology to provide solutions that increase paving performance and provides maximum uptime for the machine.

Both the PF6160 and PF6170 are powered by a 205-hp (153 kW) Tier III-certified Cummins engine. A level-load suspension design uses the two drive wheels and the center of the bogie hydraulic system. This provides consistent and even ground con-

tact for stability. Both the PF6160 and the PF6170 come standard with the two-wheel front-wheel assist; however, the PF6170 can be configured with an optional four-wheel front-wheel assist for all-wheel-drive capability. The torque is adjusted based on the hopper load, optimizing the machine’s traction.

Material Management A number of features on these pavers provide contractors with more options in material flow. The auger system is independent of the

conveyor system with each of the two auger and conveyor drives using sonic sensors for more precise handling of material. The conveyor system has chains that are automatically tensioned for proper performance and less downtime.

The conveyor chain cover cleans itself, providing easier maintenance. Reversible augers and conveyors are optional equipment.

A hopper capacity of 14.38 tons (13.04 t) gives each paver a practical production rate of 820 tons (744 t) per hour. Standard on all PF6000-Series pavers are hopper

locks that keep hopper wings secure during transport.

Operator Controls The PF6160 and PF6170 feature dual control stations, which can pivot at two points for comfort, and each seat may be extended beyond the edge of the machine for improved visibility. An open deck space improves mobility for the operator and increases visibility, and secure handrails provide added safety. The operator panel keeps all controls, gauges and warning lights at the fingertips of

the operator, with the ability for the panel to tilt or swivel to fit the comfort of the operator.

Choice of Screed The Volvo PF6160 and PF6170 can fit the Omni 318, Omni 1000 or Ultimat 200 screeds, allowing the flexibility to build a paver to fit the needs of the application. Both pavers have a screed width of 10 ft. (3 m) and a maximum paving width of 26 ft. (8 m). PF6000Series pavers have a 30-kW generator providing plenty of power to the screeds.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 51

Folcomer Equipment Corp.

P O Box 340 629 S. Philadelphia Blvd.

Aberdeen, MD 21001 800-737-0049 Fax: 410-575-7052 6300 Crain Highway Upper Marlboro, MD 20772 800-227-3580 Fax 301-627-9764 1561 Tilco Drive Frederick, MD 21704 800-951-2550 Fax 301-682-6075 2300 Eskow Avenue Baltimore, MD 21227 800-218-9462 Fax 410-247-7723 12420 Sussex Highway P O Box 338 Greenwood, DE 19950 800-756-9433 Fax 302-349-5785 Tracey Road Equipment 6803 Manlius Center Road PO Box 489 East Syracuse, NY 13057 315-437-1471 1523 Route 11 North Binghamton, NY 13795 607-775-5010 Fax: 607-775-5104 300 Middle Road Rochester, NY 14467 585-334-5120 Fax: 585-334-5127 19598 Cady Road (Exit 44 - Watertown Center - off I-81) Watertown, NY 13606 315-788-0200 Fax: 315-788-3006

WHILE SOME PEOPLE ARE HAVING A PROBLEM GRASPING THE CONCEPT, THEY’RE SURE NOT HAVING ANY DIFFICULTY GRABBING THE RESULTS.

115 Railroad Ave. Ext. PO Box 5306 Albany, NY 12205-0306 518-438-1100 Fax: 518-438-4430

It’s a rubber tire roller that vibrates with enough centrifugal force to equal the output of a 55,000 pound pneumatic. The GW750 handles the toughest HMA mixes with ease, getting balanced high densities from the top through the bottom of the mat. Great on SMA, too! And it provides a sound interlock between new overlays and profiled surfaces. It’s bonus time! www.sakaiamerica.com 1-800-323-0535

Check one out at your Sakai dealer today.

McKean, PA 814/476-7755

Schmidt Equipment, Inc. 80 Southbridge Rd. North Oxford, MA 01537 508/987-8786

10 Republic Rd. North Billerica, MA 01862 978/667-4345

1620 Page Blvd.

Springfield, MA 01104 413/543-5595

88 Camelot Drive Plymouth, MA 02360 508/830-9997

Highway Equipment Company 22035 Perry Highway Zelienople, PA 16063 724/452-7800 Fax: 724/452-7030

2397 Gar Highway (Rt. 6 & 136) North Swansea, MA 02777 508/379-9810

Dubois, PA 814/371-3600

Page 52 • November 24, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

3517 Wayne White Rd., Climax, NC 27233

866-430-7539

jfwequip@aol.com www.jfwequipment.com

2007 Midland SPD-8 Road Widener, dual discharge, hydrostatic drive, John Deere diesel engine, 2-3’ hyd ext

2008 Etnyre Chip Spreader, computerized, 13’ spread hopper, hydrostatic drive, front wheel drive, Cummins 5.9L diesel engine

1998 Ingersoll Rand DD110 Double Drum 78” Vibrator y Roller, Cummins diesel (2004 & 1994 also available)

1997 Etnyre K Chip Spreader, computerized, 12-24’ extendable hopper, hydrostatic drive, Cummins diesel, 4 wheel drive, (2000 year 10-20’ extendable also available)

1998 Blaw Knox PF 3172 Paver, Cummins diesel engine, Omni IIIA screed 1018’

1993 Barber-Greene BG270B Paver, John Deere diesel engine, Cat 10-20B Extend-AMat

New Marathon KERA10 Walk Behind Crack Sealer, 10 gallon material vat, full wrap around oil jacket, manual full sweep agitation, single 50,000 BTU vapor burner, auto temp control, heated 3/4” discharge valve

2005 Etnyre 2000 Gallon Distributor, computer w/1’ cut-offs, propane burners, 12’ spray bar, Ford F750XL super duty w/Cat C7 diesel engine, automatic transmission, air brakes

1990 Mack Midliner w/Renault diesel engine, air brakes, 6 speed transmission, Etnyre FX700 distributor, 1565 gallon, propane heat, 12’ TUC spray bar

Serving Serving the the Asphalt Asphalt Industry Industry for for 25 25 Years Years 1-800-223-1202 I WWW.ASPHALTCARE.COM 2765 Galloway Road • Bensalem, PA 19020 WE SUPPLY PARTS FOR IR/BLAW KNOX, DYNAPAC, MARATHON, MAULDIN, YANMAR, NEAL, CIMLINE, TOWMASTER AND MANY OTHERS

$16,500

1974 CAT D3 DOZER 3154 Hrs, Widetrack, UC and Engine are in Excellent Shape, 4-Way Blade

BULK T OA TACK C CK IN STO

$25,900

2009 MARATHON KERA 145 HP MELTER Demo Unit, 145 oil jacketed kettle, auto temperature control, pump & wand, agitation, many extras!!

$102,000

2010 MAULDIN 1750C SILVER 16 PAVER 237 hours, 8’-16’ screed, continuous ignite propane heat, John Deere 80 hp., poly pads.

$18,500

1995 LEEBOY 8500 PAVER 2750 Hrs, 8’-15’ Screed, Hatz Diesel, Runs Well

$5,000

GALION S4-6A TANDEM ROLLER Excellent condition, 40” front / 42” rear drums, tow package, 4 cylinder gas, runs great.

ADDITIONAL EQUIPMENT MARATHON DIRECT FIRE AND OIL JACKETED KETTLES, Many gallon sizes to choose from, propane or diesel fired, skid mount or trailer units. ..............P.O.R.

2005 DYNAPAC CC122 ROLLER, 1278 Hrs, 47” Drum w/Dual Vibration, Operating Weight 5735 Lbs, Deutz Diesel ..................................................$14,500

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 53

Performance and reliability Dynapac’s asphalt rollers and pavers Dynapac’s CC424HF, CC524HF and CC624HF tandem asphalt rollers are a new generation of articulated tandem rollers powered by a Cummins QSB 4.5 water-cooled turbo-diesel engine with after cooler. The rated power is 125 hp at 2200 rpm for the CC424HF, and 152hp for the CC524HF and for the CC624HF. The new models have operating masses ranging from 11.6 tons to 13.9 tons, the weight split evenly between the front and rear drum modules.

Dynapac’s new F1000 series wheeled or tracked asphalt pavers have been designed especially for the North American market. They have the lowest deck height in the industry and feature 3/4-inch formed hopper wings that deliver asphalt to a high-capacity slat conveyor. A high-performance outboard auger drive and the conveyor design eliminates center line segregation.

Want to know more? Have a closer look at dynapac.com.

ANDERSON EQUIPMENT Bridgeville, PA 412.343.2300 &OHDU¿HOG 3$ 814.765.5311 Clarion, PA 814.226.4100 Somerset, PA 814.443.2867 Cambridge Springs, PA 814.398.8819 Charleston, WV 304.756.2800 Fairmont, WV 304.366.3075 Buffalo, NY 716.877.1992 Dynapac USA 3700 East 68th Avenue Commerce City, CO 80022 USA Phone: 800-732-6762 Fax: 303-288-8828

AUTHORIZED DYNAPAC DEALERS

ANDERSON EQUIPMENT Rochester, NY 585.334.6770 Syracuse, NY 315.463.8673 Albany, NY 518.785.4500 Watertown, NY 315.788.5512 Endicott, NY 607.748.3400 Olean, NY 716.372.8822 Bangor, ME 207.942.0177 Cumberland, ME 207.829.5503 Manchester, NH 603.627.7696

Email: dynausa@dynapac.com Website: www.dynapac.com

ALL ISLAND EQUIPMENT CORP. W. Babylon, NY 631.643.2605 ASPHALT CARE Bensalem, PA 215.639.9800 ESSEX EQUIPMENT Essex Junction, VT 802.878.5316 HARTER EQUIPMENT Millstone Township, NJ 732.446.7600

STAFFORD Ashland, VA 804.798.4500 Roanoke, VA 540.992.4650

STEPHENSON EQUIPMENT Harrisburg, PA 717.564.3434 Lancaster, PA 717.859.1840 Wilkes-Barre, PA 570.654.4612

ATLAS COPCO BALTIMORE STORE 410.485.3366 ATLAS COPCO LUDLOW STORE Ludlow, MA Covering western Massachusetts and Connecticut 413.589.7439 LORUSSO HEAVY EQUIPMENT Walpole, MA 02081 508.660.7600

Part of the Atlas Copco Group

Page 54 • November 24, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Get Lucky …

Get a Talbert!

New Talbert 55 Ton Low Beds, 26’ deck, dropside or level deck, air ride, lift axle, 2 king pin setings and Much More.

800-877-5854 • 802-763-2585 Exit 3 off I-89 • South Royalton, VT 05068

Visit Our Website: www.luckystrailers.com

877-201-9993 • 802-893-6565

28 Jasper Mine Road • Colchester, VT 05446 • Fax: 802-893-6604

Wirtgen W 200 Asphalt Cold Miller Offers Three Engine Speeds The new W 200 asphalt cold The Intelligent Speed milling machine from Wirtgen Control system incorporates an America Inc. is a large but electronic flow divider that compact milling machine that makes the four tracks work in can be equipped with milling harmony when turning a drum assemblies of 59, 79, or radius. Skipping and notching 87 in. (150, 200 or 221 cm) are eliminated, track wear is working width. Three selecminimized, and the machine table engine speeds enable a operates smoother, according broad range of applications, to the manufacturer. such as large-scale surface The units incorporate the course rehabilitation, complete Level Pro, Wirtgen’s existing pavement removal at full automatic leveling system, depth, fine milling, and many which is user-friendly and regothers. It has a milling depth of ulates the pre-set milling depth 0 to 13 in. (0 to 33 cm) and is and actual readout electronicalpowered by a single engine ly. generating 550 hp (410 kW).

Asphalt and concrete milling Its operating weight is 59,934 is one of the most abrasive lbs. (27,185 kg) with half-full environments for any machine, water tank, half-full fuel tank, a Wirten’s large but compact milling machine, shown here with the optional canopy, is available in three but the vacuum cutting system selectable engine sizes.

165-lb. driver, and tools. will remove dust, fines and Like the W 200, the new W smoke from the cutter chamber 210 is a large but compact milling machine, the W 200, it features three selectable they move into a cut, accelerating produc- and extract it out of the conveyor, keeping which can be equipped with milling drum engine speeds to enable a broad range of tion, and their “smart” WIDRIVE technolo- the machine cleaner and prolonging compoassemblies of 59, 79, or 87 in. working applications. Its operating weight is 62,138 gy offers new microprocessor-controlled nent life, according to the manufacturer. enhancements to machine control systems, width. But unlike the W 200, the W 210 lbs. (28,185 kg).

And Wirtgen’s new 3DS flexible applicaThe Parallel-to-Surface (PTS) technolo- tying all main functions to a single source to tion drum speed system will automatically boasts a fuel-saving drive concept utilizing two diesel engines, generating a total 671 hp gy used on the W 200 and W 210S auto- manage fuel costs, tooth costs and other slow drum speeds in deep cuts, saving on (500 kW) with both engines engaged. Like matically keeps the cutter housing level as variables. fuel consumption and tooth wear.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 55

Mauldin’s 1750-C Super Paver is ready for fast and hard action. Unmatched performance and durability set this heavyweight apart from all others.

M413XT

Check the details at www.4aMauldin.com.

MG622

Precision Spray

Discover More Ways Mauldin Can Help You Become a Master of the Mat.

Calder Brothers Corporation 250 E. Warehouse Ct. | Taylors, SC 29687

phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com Asphalt Care Equipment & Supplies 2765 Galloway Road Bensalem, PA 19020 215/639-9800 800/223-1202 Fax: 215/639-9802 www.asphaltcare.com

Edward Ehrbar, Inc. www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Fax: 914/738-6847 Holbrook, NY 631/563-7600 Fax: 631/218-1069 Danbury, CT 203/743-0088 Fax: 203/743-0266

Cleveland Brothers

Harrisburg 717/564-2121 Clarksburg, WV 304/842-2222 Clearfield 814/765-1611 Cranberry Township 724/776-1400 Erie 814/898-3388 Murrysville 717/327-1300 Lancaster 717/859-4905

Lantz Corners 814/778-5250 Mansfield 570/662-7171 Somerset 814/445-7915 State College 814/237-8338 Turbotville 570/538-2551 Wilkes Barre 570/822-8141

Page 56 • November 24, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

PAVING

HEAVY THE WAY HITTERS

Gehl Power Box® Asphalt Pavers deliver a quick paving job, leading to repeat business and referrals.

•

Paving widths from 4 to 13 feet

•

Speeds as high as 130 fpm

• • • •

Paving depths adjustable to 6 inches Direct-drive track system is self-adjusting with a hydraulic cylinder Exhaust and/or propane heated screed

Infinite control over travel speed, matching any paving condition (model 1648)

You get more performance, reliability and productive per square foot with Stone compactors. Stompers®, forward and reversible plates, walk-behind and ride-on asphalt and dirt rollers, manual and remote control trench rollers - all designed to hit hard and travel fast.

They’ll get your job done on time and on budget.

When you need a real compaction performer call in one of the heavy hitters from Stone - a 100% employees owned American company.

All Island Equipment

39 Jersey Street • West Babylon, NY 11704 631/643-2605 631/643-4060 www.allislandequipment.com

Construction & Industrial Equipment Corp.

200 Route 17 South • Lodi, NJ 07644 201/845-6800 www.constructionindustrial.com

gehl.com

NORRIS SALES COMPANY, INC.

1300 East Ridge Pike Plymouth Meeting, PA 19462 610/279-5777 1-800/457-RENT Fax: 610/279-7973 668 Berlin Cross Keys Rd. Sicklerville, NJ 08081 856/740-1400 Fax: 856/740-1940 866/80-TOOLS (86657)

KNICKERBOCKER RUSSEL CO, INC. 4769 Campbells Run Rd. Pittsburgh, PA 412/494-9233 Fax: 412/787-7991

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 57

7YV\K [V IL

LK ^OP[L HUK IS\L

-#+)( & #&$, 25&/90& & + * &() 7&62/148 ,+& ' # & 80' % 4 !"#$ 23&4526 /1:.95=& A16.8B/ 1 < :@ & "./0 72&:99. 41&518/ !745 & ; E ; : & &D 5295 7:3/120& C&:5 ?8.0431 5-& 1 : 7 ? : ; & 2 3.> 827:/ 68.>&/ 9C&:554 & 3 2 & 1 / "./0 825?.952 281&6.8& :35&1.& & & 6/51 <:9@&2G? &>23A/9 I215&>2 1& & / C F&?/ C&.6&> /90&HG- /<2&@82 1 *;:7: 725A..1& 1&*'$&A 5& 9 ; 1482 / 18.4 76J827:/ 2 6 2 @9& ;2&5 81$25: :9@& 2 . < 74 & 54??

2&</ J6822&?/ 7 &*77 / 8 5 .

2 6 9 8 & :.

5& ):@A 2@82@/1 8./0 @82/1& 1& 7 4 5 & 5 :6 6.8& 2/41 &B:1A&/ &1A2&O2 ; & @ @ :1A :9 1:9 K82/ 2-&(.8L @&#N>&B 5 1.&4 -&M9.B:9 12/>

4(+, 05 ;/, <:( &RQWDFW 5RDGWHF IRU VXSSRUW RU PRUH LQIR RQ RXU SURGXFWV

/DV 9HJDV 1HYDGD 0DUFK

R O A D T E C an Astec Industries Company 800 MANUFACTURERS RD • CHATTANOOGA, TN 37405 USA • 423.265.0600 • FAX 423.267.7104 • roadtec.com 0$18)$& 785(56 5' &+$77$122*$ 71 86$ )$ P

Page 58 • November 24, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Tru-Pac 915

CSH Chip Spreader

RA-400 Spray Patcher

Maximizer 3 Asphalt Distributor Features:

· · · · ·

8 to 16 Foot Extendible Spraybar Automatic In-Cab Controls 400 GPM Viking Asphalt Pump Enviro-Flush Clean-Out System Internal Spraybar Valves

MAXIMIZER 3 ASPHALT DISTRIBUTOR

Roadbuilding Solutions

LeeBoy’s Rosco brand roadbuilding solutions are designed and built for the most demanding applications. From asphalt distributors and brooms to pothole patchers and chip spreaders, count on LeeBoy products for value that delivers bottom-line results.

Durability, productivity, ease of operation and value have made LeeBoy an industry leader.

Contact your Rosco Dealer

STEPHENSON EQUIPMENT, INC.

39 Jersey Street 1440 Route 9W 1275 Bloomfield Ave. West Babylon, NY 11704 Marlboro, NY 12542 Fairfield, NJ 07004 631/643-2605 845/236-3000 973/227-2221 631/643-4060 www.hoffmanequip.com 800/321-8080 www.allisland Fax: 973/575-5553 S. Plainfield, NJ 07080 equipment.com 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us

King of Prussia, PA 800/733-3776 www.usmuni.com

1701 Roseneath Rd., Richmond, VA 23230 804/359-4048

Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Lancaster, PA 800/347-6998

Wilkes-Barre, PA 866/667-6756 Syracuse, NY 800/368-6455 Albany, NY 518/357-2200

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Drive Baltimore, MD 21220 410/780-4000 www.valleysupply equipment.com

VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, N.C. 28092 • 704.966.3300 • www.leeboy.com

796 Unionville Rd. Prospect, PA 16052 724/865-9221 walshequipmentinc.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 59

Page 60 • November 24, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Every Solution for Your Paving Needs !"Asphalt Pavers (Sizes range from 10,000 - 33,000 lbs) !"Asphalt Rollers !"Motor Graders !"Pot Hole Patchers

!"Brooms !"Asphalt Distributors !"Concrete Curber !"Conveyor Belt Loaders

64 ,EE"OY )NC s ,INCOLN #OUNTY 0ARKWAY %XT s ,INCOLNTON .# s #ALL s WWW LEEBOY COM

STEPHENSON EQUIPMENT, INC.

JESCO 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553

118 St. Nicholas Ave. S. Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 www.jesco.us

HOFFMAN EQUIPMENT COMPANY

1440 Route 9W Marlboro, NY 12542 845-236-3000 www.hoffmanequip.com

VALLEY SUPPLY & EQUIPMENT CO., INC.

20332 Leitersburg Pike Hagerstown, MD 21742 301/733-7414 1109 Middle River Rd. Baltimore, MD 21220 410/780-4000

US MUNICIPAL SUPPLY INC.

King of Prussia, PA www.usmuni.com 800/733-3776

STEPHENSON EQUIPMENT, INC. Harrisburg, PA 800/325-6455 Fax: 717/564-7580 Lancaster, PA 800/347-6998 Wilkes-Barre, PA 866/667-6756

Syracuse, NY 800/368-6455 Albany, NY 518/357-2200

WALSH EQUIPMENT INC.

796 Unionville Rd. Prospect, PA 16052 724/865-9221 walshequipmentinc.com

ALL ISLAND EQUIPMENT

39 Jersey Street West Babylon, NY 11704 631/643-2605 631/643-4060 www.allisland equipment.com

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 61

WHEN RACING AGAINST TIME – OUR CUSTOMERS RELY ON THE WIRTGEN GROUP

The challenge: bridge rehabilitation in Pittsburgh, PA over the weekend to avoid total gridlock. The solution: fast and cost-effective rehabilitation methods using Wirtgen Group technologies. That’s what Wirtgen Group customers can rely on. www.wirtgenamerica.com

ROAD TECHNOLOGIES

ELLIOTT & FRANTZ, INC 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361 1457 Oak Ridge Place Hagerstown, MD 21740 301/733-8100 Fax: 301/739-1835 38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

MONROE TRACTOR

1001 Lehigh Station Road 9469 Hawkins Drive Henrietta, NY 14467 Mannassas, VA 20109 585/334-3867 703/393-4014 Fax: 585/334-0001 Fax: 703/393-4010 5035 Genesee Street 450 E. Church Road Buffalo, NY 14225 King of Prussia, PA 19406 716/681-7100 610/279-5200 Toll Free: 800/834-9606 7300 Eastman Road N. Syracuse, NY 13212 315/452-0000 Toll Free:800/287-5286

110 Old Ithica Road Elmira, NY 14845 607/739-8741 6936 State Rte. 434 Binghamton, NY 13732 607/754-6570

EDWARD EHRBAR, INC. 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Long Island 601 Coates Ave. Holbrook, NY 11741 631/563-7600 New York City 718/626-3331 42 Kenosia Avenue Danbury, CT 06810 203/743-0088 Fax 203/743-0266

BINDER MACHINERY CO. 2820 Hamilton Blvd.

South Plainfield, NJ 07080 908/561-9000 Fax 908/561-2844 South Jersey Facility – Winslow Twp. 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

THE W.I. CLARK CO. 30 Barnes Industrial Park Rd. Wallingford, CT 06801 203/265-6781 Fax 203/284-1064 15 Station Road Brookfield, CT 06804 203/775-1203 275 Route 32 Plainfield, CT 06374 860/546-4808

WOOD’S CRW CORP OF NH 1401 Hooksett Road Hooksett, NH 03106 603/644-8787 603/644-8747 www.woodscr wnh.com

GROFF TRACTOR & EQUIPMENT, INC. 6779 Carlisle Pike 1010 Pittsburgh Road Mechanicsburg, PA 17050 Valencia, PA 16059 800/33-GROFF 877/33-GROFF 800/33-(47633) 877/33-(47633) 20 Stouffer Lane 963 South Center Avenue Ephrata, PA 17522 New Stanton, PA 15672 888/66-GROFF 888/82-GROFF 888/66-(47633) 888/82-(47633) 210 Rolling Ridge Drive Bellefonte, PA 16823 888/47-GROFF 888/47-(47633)

CENTRAL EQUIPMENT COMPANY 45 Dempsey-Greaves Lane Stillwater, ME 04489 800/479-6193 Fax: 207/827-3774

Page 62 • November 24, 2010 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The Worldwide Leader in Concrete Paving Technology

800-831-2320 ! www.gomaco.com CONCRETE STREETS AND HIGHWAYS ! AIRPORT RUNWAYS ! CURB AND GUTTER ! SIDEWALKS RECREATIONAL TRAILS ! SAFETY BARRIER ! BRIDGE PARAPET ! BRIDGE DECKS ! IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA

CLEVELAND BROTHERS EQUIPMENT COMPANY Murrysville, PA

724/327-1300 Altoona, (Duncansville), PA

814/696-0201

Lantz Corners, (Kane), PA

814/778-5250 Clearfield, PA

814/765-1611

This bracelet was a gift Amber Apodoca received from the center where she helped teens with drug and alcohol problems. She was wearing it when an underage drunk driver took her life.

Friends Don’t Let Friends Drive Drunk.

HOLBROOK OFFICE 601 Coates Ave. Holbrook, NY 11741 631-563-7600 Fax: 631-218-1069 DANBURY OFFICE 42 Kenosia Avenue Danbury, CT 06810 203-743-0088 Fax: 203-743-0266

6018 Drott Drive Syracuse, NY 13057 800-368-6455 1886 Duanesburg Road Duanesburg, NY 12056 518-357-2200

www.acecrushers.com 171 Tolland Turnpike Willington, CT 06279 860-429-2793 Fax: 860-429-0542

70 Platt Road Shelton, CT 06484 203-944-0524

Photo by Michael Mazzeo

www.ehrbar.com YONKERS OFFICE 4 Executive Plaza Yonkers, NY 10701 914-738-5100 Fax: 914-738-6847

STEPHENSON E Q U I P M E N T, I N C .

Erie, PA

814/898-3388 Somerset, PA

814/445-7915

Cranberry Twp., PA

724/776-1400 Clarksburg, WV

304/842-2222

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 24, 2010 • Page 63

Chadwick-BaRoss, Inc. Bangor, ME (207)942-4838 Caribou, ME (207)498-2547 Westbrook, ME (207)854-8411 Concord, NH (603)224-4063 www.chadwickbaross.com

George Associates, Inc.

2340 Montgomery Street Silver Spring, MD 20910 (301)589-9490

Highway Equipment & Supply Co. Harrisburg, PA (717)564-3031 Drums, PA (570)788-1127 Ephrata, PA (717) 859-3132 Lock Haven, PA (570) 769-1070

Penn Jersey Lionville Branch 120 Gordon Rd. Lionville, PA 19341 (610)363-9200

Deptford Branch 1330 Hurfville Rd. Deptford, NJ 08096 (856)227-6400

Somerville Branch 61 County Line Rd. Somerville, NJ 08876 (908)218-1919

Staten Island Branch 331 Edward Curry Ave. Staten Island, NY 10314 (718)889-0105

Tyler Equipment Corporation E. Longmeadow, MA (413)525-6351 Berlin, CT (860)356-0840 www.tylerequipment.com

Vantage Equipment

Latham, NY (518)220-9500 Batavia, NY (585)344-1931 Syracuse, NY (315)437-2611

Page 64 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 65

Authorized Bobcat Dealers

CONNECTICUT

TAKE AN 8-12 HOUR ESCAPE FROM THE ECONOMY...

JUST DON’T TURN ON THE RADIO.

Bobcat of Connecticut, Inc. East Hartford 860-282-2648

Chaffee s "/"#!4

Bobcat of Connecticut, Inc.

Bobcat of Saratoga

www.bobcatct.com

www.bobcatofsaratoga.com

www.bobcatct.com

Stratford 203-380-2300

MARYLAND

A NEW - 3ERIES LOADER FROM "OBCAT 4HEY RE QUIETER more comfortable and more enjoyable to work in. With

Bobcat of Buffalo

www.bobcatofbaltimore.com

Bobcat of Central New York

Jordan Equipment Company

mind off of things, especially when you’re working in

'ANSEVOORT

Lockport s "/"#!4

MAINE

It’s surprising how an 8-12 hour workday takes your

www.bobcatofbuffalo.com

Bobcat of Baltimore, LLC

Middle River s

ARE YOU M-POWERED?

NEW YORK

Bobcat of Buffalo South

Falmouth s www.jordanequipment.com

MASSACHUSETTS Bobcat of Boston

www.bobcatofbuffalo.com

East Syracuse

www.bobcatofcny.com

Bobcat of New York City Maspeth 718-366-7930

www.bobcatzone.com

Springer’s, Inc.

North Reading s

/NEONTA s

www.bobcatboston.com

www.springersinc.com

Pittsfield Lawn & Tractor, Inc.

Robert H. Finke & Sons, Inc.

www.plt.com

www.finkeequipment.com

Bobcat of Worcester

Springer’s, Inc.

Pittsfield 413-443-2623

Selkirk

Shrewsbury

St. Johnsville s

www.bobcatboston.com

www.springersinc.com

Bobcat of Greater Springfield

Bobcat of Watertown

design and optional seat-mounted joysticks – even a

www.bobcatct.com

www.bobcatofwatertown.com

power accessory and input jack for your MP3 player

NEW HAMPSHIRE

Highway Equipment & Supply Co.

a best-in-class pressurized interior, more cab space, larger door, increased seat suspension, cab-forward

on the optional radio – every job is more comfortable and productive. See your dealer to learn how these new compact track loaders can M-Power you to do more.

West Springfield 413-746-4647

Bobcat of New Hampshire

Chichester s www.bobcatnh.com

Bobcat of New Hampshire South Hudson s www.bobcatnh.com

NEW JERSEY

Garden State Bobcat, Inc.

&REEHOLD s 3ALES '/"#!4 2ENTAL '3" "#!4 www.newjerseybobcat.com

Bobcat of North Jersey, East 4OTOWA

THE NEW T630 COMPACT TRACK LOADER

www.njbobcat.com “Bobcat” is a registered trademark of Bobcat Company | #1110044

Watertown

PENNSYLVANIA Drums

www.hwyequip.com

Grumelli’s Farm Service Quarryville 717-786-7318

RHODE ISLAND

J. J. Gregory & Son, Inc.

East Providence s www.gquip.com

Page 64 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 65

Authorized Bobcat Dealers

CONNECTICUT

TAKE AN 8-12 HOUR ESCAPE FROM THE ECONOMY...

JUST DON’T TURN ON THE RADIO.

Bobcat of Connecticut, Inc. East Hartford 860-282-2648

Chaffee s "/"#!4

Bobcat of Connecticut, Inc.

Bobcat of Saratoga

www.bobcatct.com

www.bobcatofsaratoga.com

www.bobcatct.com

Stratford 203-380-2300

MARYLAND

A NEW - 3ERIES LOADER FROM "OBCAT 4HEY RE QUIETER more comfortable and more enjoyable to work in. With

Bobcat of Buffalo

www.bobcatofbaltimore.com

Bobcat of Central New York

Jordan Equipment Company

mind off of things, especially when you’re working in

'ANSEVOORT

Lockport s "/"#!4

MAINE

It’s surprising how an 8-12 hour workday takes your

www.bobcatofbuffalo.com

Bobcat of Baltimore, LLC

Middle River s

ARE YOU M-POWERED?

NEW YORK

Bobcat of Buffalo South

Falmouth s www.jordanequipment.com

MASSACHUSETTS Bobcat of Boston

www.bobcatofbuffalo.com

East Syracuse

www.bobcatofcny.com

Bobcat of New York City Maspeth 718-366-7930

www.bobcatzone.com

Springer’s, Inc.

North Reading s

/NEONTA s

www.bobcatboston.com

www.springersinc.com

Pittsfield Lawn & Tractor, Inc.

Robert H. Finke & Sons, Inc.

www.plt.com

www.finkeequipment.com

Bobcat of Worcester

Springer’s, Inc.

Pittsfield 413-443-2623

Selkirk

Shrewsbury

St. Johnsville s

www.bobcatboston.com

www.springersinc.com

Bobcat of Greater Springfield

Bobcat of Watertown

design and optional seat-mounted joysticks – even a

www.bobcatct.com

www.bobcatofwatertown.com

power accessory and input jack for your MP3 player

NEW HAMPSHIRE

Highway Equipment & Supply Co.

a best-in-class pressurized interior, more cab space, larger door, increased seat suspension, cab-forward

on the optional radio – every job is more comfortable and productive. See your dealer to learn how these new compact track loaders can M-Power you to do more.

West Springfield 413-746-4647

Bobcat of New Hampshire

Chichester s www.bobcatnh.com

Bobcat of New Hampshire South Hudson s www.bobcatnh.com

NEW JERSEY

Garden State Bobcat, Inc.

&REEHOLD s 3ALES '/"#!4 2ENTAL '3" "#!4 www.newjerseybobcat.com

Bobcat of North Jersey, East 4OTOWA

THE NEW T630 COMPACT TRACK LOADER

www.njbobcat.com “Bobcat” is a registered trademark of Bobcat Company | #1110044

Watertown

PENNSYLVANIA Drums

www.hwyequip.com

Grumelli’s Farm Service Quarryville 717-786-7318

RHODE ISLAND

J. J. Gregory & Son, Inc.

East Providence s www.gquip.com

Page 66 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rhode Island Contractor Raises Money in Friend’s Memory Former Tennis Partner Holding Fund-Raising Bash to Help Educate Best Friend’s Daughters

By Jay Adams

CEG CORRESPONDENT

Love-15 When John J. Hosch was a boy, his father introduced him to tennis and the game gripped him, beginning a love affair at 15.

He loved to crush the ball and make that one shot for the winning point. It was through the game that he met his dearest friend, Peter Raposa.

“I first met John nearly 20 years ago on the tennis courts where we took a tennis clinic together,” said Raposa. “We played tennis from that day forward. I have six sisters and I considered John the brother that I never had.”

“His biggest love aside from family, friends and tennis is the love that he had for the ocean,” said Raposa. “He absolutely loved being on the water, kayaking and fishing. He would have his sea kayak strapped to the top of his jeep roof from early spring to late fall. He would be out on the water every opportunity he had.”

Hosch’s life ended by the water he loved.

15-30 On April 5, 2010, after 45 years as a devoted son, husband and father, John J. Hosch died unexpectedly while going for a run on Second Beach in Middletown.

A Difficult Tie Breaker “The day Rebecca called me will be a day I will never forget,” said Raposa of the ties Love-30 For 30 years, Hosch drove a truck – first, he lost. “I lost my father 11 years ago and I for four years while serving in the U.S. Air have never experienced those same type of Force. He drove fuel trucks to aircrafts and emotions since then, until John died. He was fueled them, getting them ready for take off. family to me, a brother I never had. He was Then for his 26 years as a civilian, Hosch truly a wonderful person who loved his family so very much. John would tell me through the years that his two girls would go to college and get their degrees. We had this conversation many times.

John thought, as we all do, that he had many years in front of him to pay for college.

“When John passed, I could not bear the thought of his children not being able to go to college, so I decided to create a trust for Adrianna and Olivia to help pay for their college expenses,” added Raposa. “He just wanted the absolute best for his two girls, to give them On April 5, 2010, after 45 years as a devoted son, hus- the best possible chance for band and father, John J. Hosch died unexpectedly a promising future.” while going for a run on Second Beach in Middletown, The trust became official R.I. this month. Its name: John J. Hosch Memorial Trust. worked for Petro Oil Company, delivering oil fuel to customers.

40-40 Raposa is currently organizing a benefit Love-Love, Match dinner on Nov. 20 from 6 to 11 p.m. at the In 1986, Hosch met a young woman Atlantic Beach Club in Middletown. Money named Rebecca Hastings. They married in raised will go to the education of Adrianna 1989. She was 20, he, 23. and Olivia.

For the next two decades, Hosch would Tickets are $40 each. The goal for the benprove to be a devoted husband and father, efit dinner is to raise a minimum of $15,000. raising two wonderful daughters, Adrianna, “We have had an overwhelming amount now 20, and Olivia, now 17. The Hosch’s of support from the community. So far, we world was centered on their home in Exeter have close to 50 businesses who are sponand the beaches of Middletown and sors or donors for this special event and we Newport, R.I. are just getting started,” said Raposa. “We

Hosch with his two daughters, Olivia (L) and Adrianna in 1994.

The John J. Hosch Memorial was created by Peter Raposa to fulfill Hosch’s longtime dream of sending his daughters Adrianna (L), now 20, and Olivia, now 17, to college. After they have graduated, the trust will continue to generate funds to send young adults in the community to college.

also have one special person, chain saw sculptor Michael Higgins, who will be doing a live performance on the night of the event.

He is donating his time and skill to help John’s children.”

Also on the evening’s schedule, DJ Butch Taylor will be providing the music for dancing, and there will be will be a silent auction and a number of raffles.

There also will be several annual events such as 5k races, a tennis tournament and a

fishing tournament.

“All monies raised will go to the education of his two girls. In addition to these events, I will be donating through my company, By The Sea Construction LLC., a minimum of 20 percent of my net profit on any job where clients say they would like to support the John J. Hosch Memorial Trust,” said Raposa. “My company specializes in all phases of carpentry work.” see HOSCH page 82

Page 68 • November 24, 2010 • www.constructionequipmentguide.com • Motor Graders Section • Construction Equipment Guide

MAKE

MODEL

OPERATING WEIGHT (LBS)

MOLDBOARD LENGTH (FT)

CASE

845DHP 865VHP 885

29,777 32,265 37,980

12 13 14

22 23.5 23.5

17.4 17.4 17.4

27/21 27/21 27/21

NHC NHC NHC

G140 G170 G200

29,918 32,077 37,738

13 13 13

24.5 24.5 24.5

17.5 17.5 17.5

28/21 28/21 28/21

16,800

10 or 12

16.4

15.4

34,830 36,150 38,140 38,690 41,660 43,650 48,720

12 (standard) 12 (standard) 12 (standard) 12 (standard) 12 (standard) 12 (standard) 14 (standard)

25 (standard) 25 (standard) 25 (standard) 25 (standard) 29 (standard) 29 (standard) 31 (standard)

17.5 17.5 17.5 17.5 18 18 17.5

NORAM NorAm

65E

VOLVO Volvo Volvo Volvo Volvo Volvo Volvo Volvo

MODEL

MAKE

Caterpillar Caterpillar Caterpillar Caterpillar Caterpillar Caterpillar

12M 140M2 160M2 14M 16M

32,016 37,911 38,051 47,133 57,452

CHAnMC6P0ICON12,800 Champio Champion Champion Champion Champion Champion Champion

C66 C C70 C C80 C C86 C C110 C C116 C

13,400 13,050 15,000 15,500 23,500 24,000

E EER JOHN67D 33,820 0G Deere Deere Deere Deere Deere Deere

770G 672G 772G 870G 872G

34,730 36,060 36,920 36,120 38,240

KOMAT3SVHU 30,950 P 5Komatsu GD55 655-5 GD u ats Kom

35,351

G930 G940 G946 G960 G970 G976 G990

BLADE LIFT ABOVE GOUND (IN)

MOLDBOARD HEIGHT (IN)

MOLDBOARD LENGTH (FT)

AR PILL31 CATER ,069 120M

MAX. BLADE SHOULDER REACH, NET ENGINE POWER, FRAME ARTICULATION, MIN. TURN SIDE SHIFT, FRAME STRAIGHT, 1ST GEAR (HP) EITHER SIDE (DEG) RADIUS (FT/IN) RIGHT/LEFT (IN) RIGHT/LEFT (FT/IN)

Case Case Case

NEW HOLLAND

OPERATING WEIGHT (LBS)

MOLDBOARD BLADE LIFT HEIGHT (IN) ABOVE GROUND (IN)

12 12 12 12 14 14

12 14

44 44 36 44 44 44 44

16 16 16 16 16 23 23

21 21 19 21 21 24 24

10 10 10 10 10 12 12

26/20 26/20 26/20 37.3/32.3 31/29 43/25.5

16.7 16.7 18.8 17.7 16.4 16.4

24 24 24 27 27 31

12 12 12 14 14 16

24 24 24 24 27 27

MAX. BLADE SIDE SHIFT, RIGHT/LEFT (IN)

26.8 cutting edge) 26.8 19.2 (with 6 in. cutting edge) 26.8 19.2 (with 6 in. cutting edge) 26.8 19.2 (with 6 in. cutting edge) in.

19.2 (with 6 in. cutting edge) 26.8 6 17.7, 19.2 (with 6 in. cutting edge) 26.8 17.7, 19.2 (with

26 26

19 19

32/32 32/32

140 180 205

25 25 25

23.8 23.8 23.9

7/6.4 7/6.4 7/6.4

140 180 205

25 25 25

23.8 23.9 23.9

20/17

39.1/42

110

25

18.8

26.4/26.4 26.4/26.4 26.4/26.4 26.4/26.4 26.4/26.4 26.4/26.4 26.4/26.4

6.7/6.6 6.7/6.6 6.7/6.6 6.7/6.6 6.5/6.4 6.5/6.4 7.4/7.4

155 175 195 195 210 210 225

23 23 23 23 21 21 21

23.8 23.8 23.8 23.8 25.2 25 26.8

SHOULDER REACH, FRAME STRAIGHT, RIGHT/LEFT (FT/IN)

, NET ENGINE POWER ) P H ( R A 1ST GE

3.0/3.0 3.0/3.0 3.0/3.0 3.0/3.0 3.0/3.0 6.3/6.5 6.3/6.5

6.8 6.8 6.8 6.8 7.6 7.6

79 76

E.COM QUIPMENTGUID E N IO T C U R T S N INGS. VISIT WWW.CO RGRADER LIST O T O M E T LE P FOR COM

110 110 110 110 110 120 120

155 165 170 194 180 214

140 180

MIN. TURN RADIUS (FT/IN)

24.5 24.5 25.5 25.5 25.8 29.2

20 20 20 20 20 20

138 158 193 194 259 297

6.3/5.8 6.3/5.8 6.5/6.8 7.5/6.8 7.5/7 8.5/7.5

N, FRAME ARTICULATIO EITHER SIDE (DEG)

17.5 17.5 21 19 19 N/A N/A

24 24 24 24 24 20 20

22 22 22 22 22 22

23 25

23.7 23.7 23.7 23.7 23.7 23.7

22.3 24.3

Construction Equipment Guide • Motor Graders Section • www.constructionequipmentguide.com • November 24, 2010 • Page 69

So many options. One obvious choice.

Offering one-of-a-kind advantages and unequalled options, our G-Series Motor Graders let you decide how the work gets done. Choose from full-featured Grade Pro (GP) models with state-of-the-art fingertip armrest controls. Or opt for conventional leveroperated machines in tandem or six-wheel-drive configurations. Each grader comes equipped with uptime-boosting advantages such as NeverGrease™ pin joints, easy-access filter bank, and simple-to-clean swing-out coolers. That’s only the beginning. To learn more about the features that make the G-Series Motor Graders your best choice, stop in or give us a call.

CONNECTICUT

The W.I. Clark Company Wallingford, CT 06810 203/265-6781 Brookfield, CT 06804 203/775-1203 Plainfield, CT 06374 860/546-4808

DELAWARE

Jesco, Inc. Middletown, DE 302/376-0784

MARYLAND

Jesco, Inc. Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438

MASSACHUSETTS

Schmidt Equipment, Inc. North Oxford, MA 01537 508/987-8786 North Billerica, MA 01862 978/667-4345 Plymouth, MA 02363 508/830-9997 No. Swansea, MA 02777 508/379-9810 Springfield, MA 01104 413/543-5595

NEW JERSEY

Jesco, Inc. 118 St. Nicholas Ave. South Plainfield, NJ 07080 908/753-8080 800/241-7070 Fax: 908/753-7853 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 1790 Route 38 Lumberton, NJ 08048 609/267-2020 888/217-0600 Fax: 609/261-8559

NEW YORK

Five Star Equipment, Inc. Rochester, NY 14624 585/235-3011 Kirkwood, NY 13795 607/775-2006 East Syracuse, NY 13057 315/452-4560 West Falls, NY 14127 716/662-2191 Jesco, Inc. 495 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671

PENNSYLVANIA

Doyle Equipment Co. Cranberry Township, PA 160660840 724/776-3636 Fax: 724/776-2450 Delmont, PA 15626 724/837-4500 Five Star Equipment, Inc. Dunmore, PA 18512 570/346-1701 Stroudsburg, PA 18360 570/424-1652 Waterford, PA 16441 814/796-2663 Williamsport, PA 17701 570/494-4030

Page 70 • November 24, 2010 • www.constructionequipmentguide.com • Motor Graders Section • Construction Equipment Guide

Noram’s 65E Features Big Design in Compact Size

The NorAm 65E compact grader features big grader design including articulated frame, torque proportioning rear axle, wheel lean, and inch control in the body of a compact motor grader.

Noram’s 65E compact motorgrader, which in addition to the Cummins engine, is available with Cat power; both are Tier III emissions compliant. The 65E also features a digital electronic display and diagnostics system to monitor the machine operating systems to ensure optimum performance and ease of maintenance and repair.

The 65E is available with canopy or cab and air conditioning.

The NorAm 65E compact grader features big grader design including articulated frame, torque proportioning rear axle, wheel lean, and inch control in the body of a compact motor grader. Its small turning radius makes it maneuverable and able to work in confined spaces.

The drive train with ZF full powershift

transmission/torque converter (with electronic shift control) delivers power and torque to the tandems.

The big grader design A-frame and 53 in.

(135 cm) gear driven circle configuration provides the strength and stability for the Standard 10 ft. (3 m) or Option 12 ft. (3.6 m) “rollaway” moldboard to perform with pre-

cision and ease of operation. Standard air ride seat and “lo-effort” hydraulic controls contribute to operator comfort and productivity.

The 65E is available with canopy or cab and air conditioning.

For more information, visit www.noram65.com.

Case Motorgrader Line Boosts Performance, Durability The certified Case access to the engine and engines offered in the Case cooling package while proConstruction Equipment viding ground-line mainte800 series motorgrader line nance checks. Both batterdeliver a stronger throttle ies swing out for easy servresponse at every rpm, icing and access, while fluid improved cold-start capabilsight gauges simplify daily ity and reduced noise, inspections. The temperaaccording to the manufacture-controlled reversing turer. fan purges materials from The engines on the 800 coolers, maintaining optiSeries motorgraders are mum operating temperaelectronically controlled tures. and fueled through a highpressure common rail fuelOperator Comfort injection system. This proEnhanced vides responsive engine The steering column is control, increased fuel effiadjustable to allow an even ciency and a cleaner burn. greater ability to match the Increased horsepower operator’s preferences. across the entire Case The engines on the 800 Series motorgraders are electronically controlled and fueled through a high-pressure Low-effort control levers motorgrader line supplies common rail fuel-injection system. are grouped closer together additional power to meet and extended for increased The 865 VHP (variable horse- power allows a range in horse- fully electronically controlled operator control. the most demanding applications.

The 845 DHP (dual horsepower) power), the most popular machine power to match the needs of the Cummins engine, providing All Case motorgraders are maintains the horsepower range in the Case motorgrader lineup, application at hand by delivering increased power while meeting equipped with a front articulation required to meet the demands of incorporates all of the most recent better traction control while max- certification. joint that provides enhanced visiCase motorgraders offers ease bility to the moldboard. fine-grading applications, while enhancements to productivity imizing fuel economy.

The largest Case motorgrader, of maintenance with one-piece also providing an increase of 14 while delivering an increased 205 For more information visit net hp (153 kW). Variable horse- the 885, takes advantage of the hoods that provide complete www.casece.com. percent for tough conditions.

Construction Equipment Guide • Motor Graders Section • www.constructionequipmentguide.com • November 24, 2010 • Page 71

New Holland Motorgraders Perform in Various Applications Ranging from 140 to 205 hp (104 to 153 kW), with standard blade lengths from 12 to 14 ft. (3.6 to 4.3 m), New Holland Construction motorgraders are engineered to perform in every application, from ripping and rough grading to precise and accurate finishing work, according to the manufacturer.

The operator’s cab is mounted behind the articulation point, providing views of both ends of the working blade, and enabling the operator to maneuver and respond quickly.

With heavy-duty, box-section construction, the rugged frames of the G140, G170 and G200 motorgraders are designed to endure rigorous working conditions.

Durable front axles stand up to tough grading jobs and oscillate up to 19 degrees to manage rough terrain. An extra-long wheelbase helps deliver a smooth ride.

Featuring thin corner posts and door frames, and more than 62 sq. ft. of glass area, the cab on New Holland motorgraders provides a view in all directions. An integrated sunshade reduces glare, and standard front and rear windshield wipers/washers ensure a clear view. Interior and exterior mirrors help the operator keep tabs on any activity behind the machine.

New Holland motorgraders range from 140 to 205 hp (104 to 153 kW) with standard blade lengths from 12 to 14 ft. (3.6 to 4.3 m).

Cat 12M Motor Grader

FOR RENT

www.laser-grader.com The Laser-Grader® Model 106-P is a compact motor grader designed for precise fine grading. Laser-Grader® will offer an unusual blend of grading accuracy, versatility and production capacity. If accuracy is a requirement in your line of work, the Laser-Grader® equipped with an automated grade control package has no equal.

• Tolerance to +/- 1/8” accuracy when using processed material • 5 FT inside, 9 FT outside Turning radius • Available in 22.5HP and 29HP Kubota Diesel Engines • Hydrostatic Transmission, 6 Wheel Drive Machine • Regularly used on amateur, scholastic and professional Baseball, Football and Soccer fields, as well as clay, grass and hard surface tennis courts • Single Slope, Dual Slope, Cross Slope and Sonic Tracing Capabilities • Ice Rinks, Building Pads, Sports Field Construction & renovation, Equestrian Arena Construction & Maintenance, Tennis Court Construction, Driveways, Large golf tees, Material Balancing, curb & gutter tracing, sideway grading, aggregate base for synthetic fields Contact us for more information!

19 Appian Way • Smithfield, RI 02917

401.231.8676 • fax 401.231.8679 Gregg@Laser-Grader.com

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients.

Add 1 totalled vehicle.

Never underestimate ‘just a few.’

Buzzed driving is drunk driving.

14’ Moldboard, 14.00 Radials, Topcon 2D/3D Millimeter Ready

Call for Winter Rental Rates

JERRY HOLLERAN

Machinery Services, Inc. Royersford, PA

(610) 733-9511 machsvcs@comcast.net

Page 72 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Honoring Extraordinary Contributions…

ARTBASelects Hall of Fame Inductees One of Florida’s leading association executives, a family of highway and bridge contractors from Virginia and a Wisconsin concrete paving pioneer have been selected for induction into the nation’s highest place of honor in the transportation design and construction industry.

As part of its 25th anniversary in 2010, the American Road & Transportation Builders Association Transportation Development Foundation (ARTBA-TDF) created a “Hall of Fame” to honor individuals or families from the public and private sectors who have made extraordinary contributions to U.S. transportation development during their careers.

A committee of judges that included nine construction industry journalists reviewed the nominees and selected the Hall’s inaugural class: • Bob Burleson, president of the Florida Transportation Builders’Association (FTBA) • Stan and Jack Lanford, of Lanford Brothers Company and Adams Construction, respectively, in Roanoke, Va. • Philip Koehring, founder of the Koehring Machine Company in Milwaukee, Wis. “The transportation design and construction industry is full of visionaries and game changers like the Lanford brothers, Bob Burleson and Philip Koehring who have demonstrated exceptional leadership over their lifetime and played an important role in helping shape development of America’s transportation network,” said ARTBA-TDF Chairman Leo Vecellio, the chairman and chief executive officer of Vecellio Group Inc., headquartered in West Palm Beach, Fla. “The Hall is our way of giving these individuals the recognition they deserve and sharing their stories with the general public and elected officials so they better understand the importance of strong transportation investment.”

Nominees were considered in two categories.

Transportation Design & Construction Industry Leaders (Individuals or Families) This category honors men, women and families who have made significant contributions — beyond just having successful businesses or careers — that have notably helped advance the interests and image of the transportation design, construction and safety industry.

Bob Burleson Florida Department of Transportation Secretary Stephanie Kopelousos calls Bob Burleson a “catalyst for change.”

Burleson has spent 40 years in the transportation construction industry. From 1970 to 1988, he was a top executive with the Wiley N. Jackson Company in Virginia, and played a key role in the company’s growth.

In 1989, he assumed the chief executive post at FTBA when the association was facing serious fiscal challenges. In less than seven years, he returned the association to strong fiscal health and retired the association’s building mortgage — 23 years early. He also managed to boost membership after years of decline.

Consistent with FTBA’s advocacy mission, Burleson has led hard-fought legislative victories on the industry’s behalf.

Under his leadership, the association helped secure in 1990 the largest funding increase for transportation in Florida history.

He championed legislation that doubled fines for motorists in construction zones in 1996. He helped create the “Stop Highway Robbery” campaign to prevent legislative sweeps of the state’s transportation trust fund in 2004. And in 2010, he helped marshal industry opposition and secured a veto by Gov. Charlie Crist that stopped a raid on state transportation funds.

The Lanford Family Through their generous contributions of personal time, leadership and financial support, the Lanford family of Roanoke, Va., has taken the notion of “giving back” to the industry to a new level and provided a benchmark for others to follow.

Brothers Stan and Jack Lanford, after starting Lanford Brothers Company and working together for more than 25 years, were very successful, long-time chief executives at their respective firms, Lanford Brothers Company and Adams Construction.

The fact that both were elected by their industry peers nationally to serve as ARTBA chairman (Jack in 1991 and Stan in 1999), and as president of ARTBA’s state chapter affiliate, known today as the Virginia Transportation Construction Alliance, speaks volumes about the men.

During their careers, both testified before the U.S. Congress on transportation investment and policy issues.

The Lanford Family’s biggest — and most enduring — legacy on the industry, however, is their creation and endowment of the Highway Worker Memorial Scholarship fund in 1999.

This first-of-its-kind program, which has become a national model replicated by other groups, provides posthigh school financial assistance to the children of highway workers killed or permanently disabled on the job. Today, it is supported by contributions from industry firms, state transportation departments and labor unions. Because of the Lanford family’s generosity, nearly 100 scholarships have been given to worthy students from around America and made their educational futures brighter.

Transportation Design & Construction Industry Innovators This category honors the men and women who discovered or created a “game changing” product or process that significantly advanced transportation design, construction and/or safety. It seeks to honor the innovator.

Philip Koehring The growth of the Koehring Machine Company in Milwaukee, Wis., is a story of a farm boy who had a vision to foresee the need for hard roads. It is the story of a struggle to perfect a machine suitable for paving purposes, and then a struggle to finance the venture and market the machine. And it is a story that lifted that farm boy to the very top of his field.

Philip Koehring, his brother William and a third partner, founded the company in 1907. It would eventually grow into one of the largest equipment manufacturers in the world, and later become a part of the Terex Corporation.

Koehring’s “boom and bucket” creation transformed concrete paving from myth to reality in the early 1900s. The innovation streamlined the flow of materials so as the machine was being pulled forward, it mixed concrete and then distributed the final mix to the rear. Prior to this invention, the idea that entire roads could be built with concrete was just a pipe dream.

Koehring added two more advancements to improve the mechanization of concrete paving: self-propelling crawler tracks and engine power in place of steam power. With 15 mixing and paving patents, combined with his equipment manufacturing expertise, Koehring forever transformed the world of concrete.

An official ceremony honoring the 2010 class will be held in fall 2011 at an ARTBA Innovation Conference in the Washington, D.C., area.

PENNSYLVANIA EAGLE POWER & EQUIPMENT CORP. 953 Bethlehem Pike PO Box 425 Montgomeryville, 18936 215/699-5871 Uwchlan 610/458-7054 GROFF TRACTOR & EQUIPMENT INC Mechanicsburg 717/766-7671 Ephrata 717/738-0220 State College 814/353-8400 New Stanton 724/755-0124 Cranberry Township 724/898-1535 Ebensburg 814/472-7300 MEDICO INDUSTRIES, INC. 1500 Highway 315 Wilkes-Barre 18711 800/633-0027 Route 611 at Shafers School House Rd. Stroud Township 18360 570/420-0877 MARYLAND FOLCOMER EQUIPMENT CORP 629 S. Phila. Blvd Box 340 Aberdeen 410/575-6580 Upper Marlboro 301/627-3938 Baltimore 410/247-7454 Frederick 301/682-4441

NEW YORK ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon 11704 631/643-2605 631/643-4060 www.allislandequipment.com TRACEY ROAD EQUIPMENT, INC. 6803 Manlius Center Rd. PO Box 489 East Syracuse, 13057 315/437-1471 800/872-2390 1523 Route 11 North Kirkwood, NY 13795 607/775-5010 800/370-9488 607/775-5104 - fax 300 Middle Road Henrietta, NY 14467 585/334-5120 866/950-6210 585/334-5127 - fax Adams Center 315/788-0200 888/335-0200 315/788-3006 - fax Albany 518/438-1100 800/692-9669 518/438-4430 - fax

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 73

POWERFUL SOLUTIONS

act your full service dealer for more information

DELAWARE FOLCOMER EQUIPMENT CORP. 12420 Sussex Highway Greenwood, 19950 800/756-9433 EAGLE POWER AND EQUIPMENT 2211 DuPont Highway (Rt.13) New Castle, 19720 302/652-3028

VIRGINIA WHITE OAK EQUIPMENT, INC. Ashland 804/798-9281 Fredericksburg 540/373-7755 Chesapeake 757/543-2273 Manassas 703/330-1333

Takeuchi understands the needs of the industry and responds with solutions.

Track loaders feature high sprocket double reduction planetary reduction final drives which provide the most efficient use of power for more traction and digging force.

Wheel loaders feature pushbutton 100% front and rear axle differential lock which provides immediate traction for superior digging and lifting power.

Excavators feature pressure compensating piston pumps which provide smooth multi-function operation with unmatched breakk out force and control.

Driven to provide maximum functionality and performance.

Try a Takeuchi and feel the power ®

The Power of Product and Support www.takeuchi-us.com

Page 74 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cranes & Shovels

Link-Belt 80100 Rough Terrain Crane Scale 1:50 - $180

Link-Belt 3200 All Terrain Crane Scale 1:50 – $200

Bantam C-35 Dragline Scale 1:50 - $70

Terex PPM AC40/2L Truck Crane Scale 1:50 - $190

Grove GMK 4115L Truck Crane Scale 1:50 - $260

Bantam C-35 Crawler Shovel Scale 1:50 - $70

Komatsu PC2000-8 Front Shovel Northwest 25-D Shovel Scale 1:50 - $250 Scale 1:50 - $90 MAIL ORDER FORM Name ____________________________________________________________________________________________________________ Caterpillar 365C L Front Shovel Scale 1:50 - $80

Address __________________________________________________________ City ________________ State ______ Zip __________ Item ______________________________________________________________________________________________________________ Payment – Credit Card or Check Number ______________________________ Exp. Date Order by email at bmckeon@cegltd.com.

Include item and payment information

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

__________ Mail to Address listed below

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200 Ext. 197 • 610-506-5961 Cell Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 75

Page 76 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

“Okay, Jamison, quit showing off and finish the dig.”

“What I love about auctions is s o m e t h i n g u n e xpected always shows up.”

“ Yes lady an old-time c o v e r ed bridge would be nostalgic but I don’t know if one could handle eight lanes of traffic.”

“I know how much you loved your hunting dog and I was fine with you burying him in the y a r d. But, when you s aid you wer e building a monument...”

“This one telescopes out so far it has two GPS’s.”

“ We’ve scaled back on our plans for a fifteen story home of fice and wonder if you’d help us install a doublewide on our lot.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 77

CHESAPEAKE SUPPLY & EQUIPMENT CO. 8366 Washington Blvd.

Savage, MD 20763 410/792-4750 800/483-0885 Fax: 410/792-2854 12915 South Dupont Highway Felton, DE 19943 302/284-1000 Fax: 302/284-2200 www.equipmentbychesapeake.com SMITH TRACTOR & EQUIPMENT INC. 15 Hillcrest Avenue Washington, NJ 07882 908/689-7900 Fax: 908/689-8942

ASPHALT CARE EQUIPMENT & SUPPLIES 2765 Galloway Road Bensalem PA 19020 215/639-9800 1-800/223-1202 Fax: 215/639-9802 www.asphaltcare.com

POWERCO, INC. 370 Route 173 P.O.Box 4995 Clinton, NJ 08809 908/735-2149 800/232-7232 7247 Penn Drive Allentown, PA 18106 800/360-1128 610/395-3775

GEORGE & SWEDE 7155 Big Tree Road Pavilion, NY 14525 800/724-8722 Fax: 585/584-8853 www.georgeandswede.com PITTSFIELD LAWN & TRACTOR 1548 W. Housatonic St. Pittsfield, MA 01201 www.plt.com 413/443-2623 Fax: 413/499-0023

E.W. SLEEPER COMPANY, INC. 391 Loudon Road Concord, NH 03302 603/225-3361 800/358-6007 Fax: 603/225-4918 www.ewsleeper.com

Page 78 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Killpack Heads Up New Global Initiative at Topcon Topcon Positioning Systems (TPS) has formed a new department to develop and cultivate partnerships and agreements between the company and global customers and potential customers.

As part of this move, Jason Killpack has been named director of strategic partnerships for TPS. The announcement was made by Murray Lodge, vice president of construction sales.

“In his new role, Jason will be responsible for providing partners with world-class tools in productivity, training, support and education for their organizations and key employees. Through this new initiative, Topcon will gain valuable insight from our partners into new product development,” Lodge said.

“To compete in the global economy, identifying and working with key partners will increase Topcon’s ability to continue to compete at a high level throughout the world.”

Of his new assignment, Killpack said, “Every position I have held in the precise

positioning business has increased my awareness of how important partnerships are to successful businesses.

“This new initiative will aid both our partners and Topcon in becoming stronger, more knowledgeable businesses.”

Killpack has worked in the precise measurement industry for more than 14 years, having started in the business in 1996 working for NESSCO Supply in Oregon. He joined Sokkia Corporation two years later and managed the local sales operation.

Killpack joined TPS in 2002 as western regional manager for survey products. Over the last several years, Killpack has held the positions of manager, senior manager and director of TPS product marketing. Before his present assignment, he served as director of product management, and was responsible for software and hardware development for TPS. For more information, call 925/245-8300 Jason Killpack has been named director of strategic partnerships for TPS. or visit topconpostioning.com.

The newest inductee for the Rental Hall of Fame is the late Herschel “Hotch” Manning.

He will be formally inducted on Feb. 28 at The Rental Show in Las Vegas.

Manning was chosen for his commitment throughout his life and rental career to exemplary character and dynamic leadership, heartfelt belief in the value of people being the key to success in the rental business and devotion to making the rental industry better.

“Hotch was a devout ambassador for our industry who knew no strangers, fit into every audience and engaged with people in a manner that made every individual better for the experience,” said Hal Roe, American Rental Association (ARA) president from Bradley Rentals, Cleveland, Tenn.

“Hotch was a ‘people person,’ the rental guy everyone knew, liked and respected. He had the insight to realize that this industry takes all kinds of people to make it work,

and he wanted everyone to know there was a place for everyone in this great business.

He was a tireless ambassador on behalf of our industry each day from when he entered the business in 1979 until the day he passed away.”

Manning focused on the image of the industry, raising identity of the appearance, layout and design of a rental business. He led development of a national advertising program for the industry through his leadership role within ARA. Manning heightened awareness of technology and education/training as critical to the success of a rental operation. He was an advocate to advance the understanding and perception of the equipment rental industry. He noted that the most critical business success factor was the staff employed by the business, and it was up to the owner to help each staff member be successful.

‘Hotch’ Manning Chosen for the Rental Hall of Fame Manning served as ARA president from 1995 to 1996, and was actively involved with the association throughout his rental career at the state and national level. His accomplishments on behalf of the association were many, and Manning was serving as an ARA Foundation Rental Executive Advisory Program (REAP) at the time of his death. He also served on the board of ARA Insurance throughout his leadership service.

Manning was involved in the rental industry for more than 18 years. He was a selfmade rental success who built A-1 Rental Centers into a multi-million dollar operation in and around Las Cruces, N.M. Before entering the rental business, Manning served 22 years in the U.S. Air Force. He retired in 1979 with the rank of sergeant-major, the highest non-commissioned rank. He purchased his first rental store in 1979, borrowing against his military life insurance policy.

He was a successful business man, a respected community leader, a pilot and rancher.

“Hotch was an inspiration to many in this industry. He was a true leader who advanced the understanding and recognition of the industry by bringing out the best in people,” Roe said. “His sincerity, passion, the manner in which he conducted his business and his strong belief in volunteerism touched many people who continue to carry on his legacy today in the rental industry.”

ARA created the Rental Hall of Fame in 2000 to foster an appreciation of the historical development of the rental industry and the leaders who have made the industry what it is today. Each year, nominations are accepted to recognize individuals who have made a substantial impact on the industry at the national or international level. The induction ceremony is held during the keynote session at The Rental Show.

V i s i t C E G ’s We b S i t e a t w w w . c o n s t ru c t i o n e q u i p m e n t g u i d e . c o m

Performance

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 79

T h e

N e x t

G e n e r a t i o n

o f

A r t i c u l a t e d

D u m p

T r u c k s

The DOOSAN MOXY MT41, through a combination of the outstanding engine rating and total production capacity per hour, achieves a superior level of productivity with reduced owning and operating (O&O) costs for the contractor.

2 9 0 5 S h a w n e e I n d u s t r i a l Wa y • S u w a n e e , G A 3 0 0 2 4 •

S e e U s O n T h e W e b w w w . d o o s a n m o x y. c o m / d m a l /

Link-Belt Mid-Atlantic

Highway Equipment Company

7096 Carlisle Pike Carlisle, PA 17111 717/558-8505 800/342-3241 Fax: 717/558-8480

Zelienople, PA 16063 724/452-7800 McKean, PA 16426 814/476-7755 Dubois, PA 15801 814/371-3600

Doosan Moxy America

Page 80 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Three Years On, Wacker Neuson Confirms Merger Success The three-year anniversary of the Wacker Neuson merger provided proof of concept, with the group’s strategy of becoming a onestop provider of light and compact equipment emerging a clear success. Taking stock of the last three years, the group reported positive progress, having reached key milestones defined during the merger and firmly placing itself on the road to further growth, according to the company.

Merger Arises From Shared Vision of Growth Three years ago, on Oct. 31, 2007, the company announced that the merger between the former Wacker Construction Equipment AG, Munich, Germany, and the former Neuson Kramer Baumaschinen AG, Linz, Austria was complete. In February 2009 it changed its legal form to a European company and has been trading under the name Wacker Neuson SE ever since.

The two companies behind the merger shared the same strong roots. Both were traditional, family-owned businesses managed with a high degree of flexibility and a strong sense of cost awareness. And both companies were committed to high standards of technology and quality, resulting in respective portfolios of market-leading products.

The merger was inspired by the joint vision of securing further growth through sales synergies. And Wacker Neuson has used its existing global sales and distribution network for light equipment to launch compact equipment in new markets, resulting in a broad light and compact equipment portfolio, flanked by an extensive service offering, according to the company.

Promoting Team Spirit and Cost Synergies The group focuses on actively merging the two corporate cultures and creating a unified corporate identity. Group-wide deployment of SAP software is a key step in this move as it will further integrate business processes.

Since 2007, the group has made significant progress and achieved many key milestones: • High levels of customer acceptance Customers highly rate the group’s ability to provide light and compact equipment along with rentals and service from a single source. In Switzerland, for example, this approach saw Wacker Neuson increase revenue in 2009 by ten percent although the industry as a whole experienced growth of just one percent. The benefits of these synergies also were evident at this year’s Bauma trade fair in Munich, where Wacker Neuson showcased its new product portfolio for the first time. Order intake was 25 percent up on Bauma 2007, when both companies had sep-

Wacker Neuson celebrated the three-year anniversary of the merger between Wacker Construction Equipment AG and Neuson Kramer Baumoschinen AG.

arate stands.

• Launch of compact equipment in further markets Since the merger, the company has used the former Wacker Group’s sales and distribution network to introduce compact equipment from its production facilities in Linz (Austria) and Pfullendorf (Germany) to markets in North and South America, South Africa, the Middle East and several countries in the EU. The most strategic target market here is the United States, where the group’s compact equipment portfolio was previously largely unknown.

The positive mid-term outlook for Wacker Neuson in the United States is a strong sign that the group will be able to build on its strong position in the light equipment sector and also become one of the leading providers of compact equipment here, according to the company.

The group is planning further launches in countries, e.g. Russia, once the economy picks up. The 20-year strategic partnership that Wacker Neuson concluded with Caterpillar in June will generate additional revenue in the compact equipment segment.

The agreement will see Wacker Neuson

designing and producing mini excavators weighing up to three tons for the company.

These machines will then be distributed under the Caterpillar brand via Caterpillar’s global sales network.

• Expansion of product portfolio for the agricultural sector The agricultural market worldwide also offers attractive long-term growth prospects for the group. Increasing reliance on technology and machinery in agricultural holdings is fueling demand for particularly versatile compact equipment. To maximize this opportunity, Wacker Neuson is gradually expanding the Weidemann range (compact equipment for the agricultural industry) to include proven machines from our construction industry portfolio (platform concept).

• Expansion and modernization of production capacity To create capacity for further growth, Wacker Neuson built four production plants over the space of three years. The new facilities were constructed at the Korbach (Weidemann) and Pfullendorf (Kramer Allrad) facilities in Germany as well as at Norton Shores in the US and Manila in the Philippines (both light equipment). A further

new facility is planned for Linz, Austria.

All of the group’s production lines then have extensive capacity and are equipped with cutting-edge technology plus the latest developments in sustainable production.

• Stronger joint position as economy recovers As was the case among all industry peers, Wacker Neuson experienced a dramatic drop in revenue, especially in 2009.

However, the company has already returned to a growth path in 2010 and is leveraging the strengths of the merger to outpace the market.

Further International Expansion Planned for the Future The Wacker Neuson Group is a growthoriented company that is determined to outgrow the market by sticking to its strategic goals. The company intends to gain new market share, open up new markets and reap the benefits of its intelligent platform concepts across the construction and agricultural sectors.

For more information, visit www.wackerneuson.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 81

*

GEORGE & SWEDE SALES & SERVICE INC. Pavilion, NY 14525 800/724-8722

PO 12010 121 Karner Road Albany NY 12212 518/456-1445 Fax: 518/456-8600

Ashland, VA 800-552-3837 Chesapeake, VA 800-342-3248 Carlisle, PA 800-342-3241 www.link-beltmidatlantic.com

LBX Company, Makers of Link-Belt excavators

Page 82 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Peter Raposa Aims to Make $20M Grant to Help Replace Friend’s Dream Come True Maine-New Hampshire Bridge HOSCH from page 66

Raposa has been a contractor for 30 years, four with his own company in Newport, R.I. He has built homes, and excavated sites, put in septic systems and raised other buildings, working with other sub-contractors in the Ocean State, primarily, Jeff Simons Excavating of Somerset, Mass., and Simmons Concrete of New Bedford, Mass.

Simons Excavating is doing the work right now on a building Raposa is putting up in Tiverton, R.I., while Simmons Concrete is laying the foundation. All this, while By The Sea Construction tries to lay a different kind of foundation down.

Deuce “A very important element to the trust is that once Adrianna and Olivia get their degrees, the monies it continues to generate will go back into the community to help other young adults to achieve their dreams of a college education,” said Raposa. “This is a very fitting and appropriate element because John and Rebecca raised their two girls, instilling in them the importance of commu-

PORTSMOUTH, N.H. (AP) A deteriorat- pedestrian and bicycle crossing of the river, nity involvement, volunteering their time to help others and the benefits of hard work. I ing bridge connecting Maine and New in addition to handling vehicle traffic. It was can only hope that my two-year-old son, Hampshire will be getting a multimillion- dedicated in 1923 to World War I veterans. dollar replacement.

From New Hampshire, LaHood was Mason, will follow in their footsteps.”

Top elected officials from the two states joined by Gov. John Lynch, Sen. Jeanne joined U.S. Transportation Secretary Ray Shaheen and Rep. Carol Shea-Porter. From Match Play “I would like to say thank you so very LaHood on Oct. 20 as he formally Maine, he was joined by Gov. John much to the more than 50 businesses and announced a $20 million federal grant to Baldacci, Sens. Susan Collins and Olympia people, that I have personally visited, sup- help pay for the replacement of the aging Snowe, and Rep. Chellie Pingree.

In August, a rusted chunk of metal fell porting this event so far,” said Raposa. “It Memorial Bridge that links Kittery, Maine, was an honor and privilege to do this for my and Portsmouth, N.H. The grant will help from the bridge. In October, the two goverbest friend. I would also like to extend an New Hampshire partner with Maine to nors signed executive orders to create a task invitation to others who are reading this arti- replace the 87-year-old bridge along U.S. 1. force to come up with as much as $300 mil“The Memorial Bridge replacement proj- lion needed over the next several years to cle that would like to donate something to the auction table or to be a sponsor to call ect is vital to the region’s economy, not only upgrade the bridge and another one — the me. It’s not too late to be part of something because it will create jobs, but because it will Sarah Long Bridge — over the Piscataqua also eliminate barriers to freight movement River. so very special.”

The governors also recognized the need For tickets to the dinner, call Raposa at and improve access to the region’s transportation network,” LaHood said at a cere- to maintain the much newer Piscataqua 401/263-3503.

Bridge, which has been carrying Interstate If anyone would like to make a donation, mony near the bridge.

The metal truss lift bridge is the only 95 traffic since 1972. make checks payable to: John J. Hosch Memorial Trust, P.O. Box 122, Newport, R.I., 02840.

Keep Up With All the Industry News Subscribe to (Editor’s note: This article originally Construction Equipment Guide Today! appeared in the New England state supplement.) CEG Toll Free 800/523-2200

Dave

Barry

A Brief Emergency Today we have some urgent breaking news, defined as “news that happened at some point in the past year and we just now found out because we’re way behind in our mail.”

Our first breaking item is an alarming report in the Erie (Pa.) Times-News, which devoted most of its front page, and an entire inside page, to this story. What happened, in brief, was that an 18-year old male got sick and defecated in . . . well, in his briefs. He then changed at a friend’s house, put his soiled clothes in a black garbage bag and threw it away. Now, in normal times, this would not be front-page news, even in Erie.

But of course, we do not live in normal times. The day before the man soiled his undies in Erie, the U.S. Attorney General had issued one of those vague yet unhelpful terrorism warnings that boil down to: “Be afraid! Be very afraid!”

So the nation was on High Random Fear

Alert when the young man disposed of his briefs. Unfortunately, he tossed the garbage bag next to a municipal reservoir and was spotted by a water works employee, who reported the bag to the police, who called out the Bomb Squad and the Hazardous Materials Response Team.

After several tense hours, police apprehended the young man, who told them what was in the garbage bag. This was confirmed by the Bomb Squad, and I think we can all agree that no matter how much those officers get paid, it is not enough. So life in Erie returned to normal for everybody except the young man, who is currently in Guantanamo Bay cell surrounded by irate military dogs.

No, seriously, he faced minor charges, and we’re sure he’s doing just as well as you’d be doing if you were the subject of a front-page newspaper story informing the world that you managed to paralyze your city after doodifying your drawers. But let this story serve

as a reminder to all of us: If we ever have a similar accident, we should NOT dispose of our underwear in a careless manner. Instead, we should —to quote the U.S. Department of Homeland Security director — “mail it to whoever is responsible for the TV show ‘Wife Swap.”’

Our next piece of breaking news is a brief newspaper article from California headlined, “Officials Crack Down on ‘Bathtub’ Cheese.” It begins: “San Diego County health officials warned against buying or eating cheeses made in bathtubs that were being sold door to door.”

It is not clear, from this wording, whether it is the cheese that is being sold door to door, or the bathtubs. To be on the safe side, we urge residents of San Diego County to avoid both bathing AND eating suspicious cheese, lest you wind up becoming ill and producing what gastroenterologists refer to as an “Erie Special.”

In international news, we have a disturbing item from the Daily Yomiuri, and English-language Japanese newspaper, which says “an 83-year-old professor emeritus was arrested after attacking a salesman with a sword after the man offered to ‘fix his sewage pipes.’”

The professor was arrested on suspicion of violating the “Firearms and Swords Control Law.” This story should remind all Americans how lucky we are to live in a nation where we have a constitutional right to keep and bear swords to protect ourselves from those who would repair our sewage pipes. We also have the right to vote for our leaders, which leads us to our final breaking news item: Apparently there was some kind of presidential election recently. Somebody should look into this. © 2010 Tribune Media Services Inc. (This article first appeared Nov. 14, 2004.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 83

www.jcb.com

World’s #1

Designed And Built For You... Whatever Your Job As the number one backhoe loader manufacturer in the world today. JCB has over 60 years experience in producing the best backhoes in the industry. With a reputation built on constant innovation, our design has gone from strength to strength. So it will be no surprise to learn that one out of every three backhoe loaders sold in the world carries the JCB logo. We also offer the world’s largest range of backhoes, so whatever your needs, JCB has a backhoe loader solution to help you get the job done.

Visit a JCB dealer to try the world’s #1 for yourself!

For more information on the full range of JCB construction equipment and to find the dealer nearest you, please visit www.jcb.com

Earthborne, Inc.

35 Easton Road Warrington, PA 18976 (Philadelphia Area) 215/443-0770 Fax: 215/443-0787

Farm-Rite, Inc.

Construction Farm & Turf 122 Old Cohansey Road Shiloh, NJ 08353 800/752-6373 856/451-1368 Fax: 856/453-9480 3853 Middle Country Road Calverton, NY 11933 631/284-3127

Liftech Equipment Co. 6847 Ellicott Drive E. Syracuse, NY 13057 315/463-7333 4381 Walden Avenue Lancaster, NY 14086 716/684-9040 241 Paul Road Rochester, NY 14624 585/328-6380 2820 Curry Road Schenectady, NY 12303 518/356-5932

9 Beldon Rd. Bloomfield, CT 860/243-9723 33B Commerce Ave. S. Burlington, VT 802/864-0308

MH Equipment Co. 126 Lakeview Dr. Charleston, WV 25313 304/776-6900 Fax: 304/776-6966 jcbmhequipment.com

Stephenson Equipment, Inc.

7201 Paxton St. Harrisburg, PA 17111 800/325-6455 135 Lincoln Ave. Prospect Park, PA 19076 800/220-4033 1805 Newport Rd. Ephrata, PA 17522 800/347-6998 137 Armstrong Rd. Pittston, PA 18640

Valley Supply & Equipment Co, Inc 1109 Middle River Rd Baltimore, MD 21220 800/633-5077 Fax: 410-780-4004 20332 Leitersburg Pike Hagerstown, MD 21742 800/336-7414 Fax: 301/797-3126

8192 Euclid Court Manassas Park, VA 20111 800/300-5579 Fax: 703/331-5688

Walsh Equipment Inc.

796 Unionville Rd. Prospect, PA 16052 724/865-9221 walshequipmentinc.com

Page 84 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Vertical-Lift 259B Series 3 Added to Caterpillar CTL Range The new 259B3 is a high-performance, highly maneuverable addition to the Cat compact track loader (CTL) range. By combining its small-frame CTL platform with the Cat C3.4T DIT engine, high breakout forces and strong auxiliary hydraulic performance, Caterpillar designed the 259B3 as a “power dense” machine capable of taking on the toughest jobs in confined spaces, according to the manufacturer.

With features such as an independent, fully suspended steel undercarriage, aggressive steel embedded rubber tracks, powerful hydraulics and refined operator’s station, the 259B3 completes the CTL line by providing a durable, versatile machine that works productively in poor soils and harsh environments.

At 35 percent tipping load, rated operating capacity for the 259B3 is 2,065 lbs. (937 kg), and 2,950 lbs.

(1,338 kg) at 50 percent tipping load, increasing to 3,000 lbs.

(1,360 kg) with the optional counterweight. Vertical-lift loader linkage gives the new CTL 120 in.

(305 cm) of lift height, in combination with enhanced reach, for easy truck loading and precise material placement.

Rated at 71 net hp (53 kW) the 259B3 is powered by the C3.4T DIT engine, which complies with U.S. EPA Tier-IV Interim and E.U. Stage-3A emissions regulations.

This engine delivers ample speed and torque in difficult applications, and combined with the Cat antistall system, the 259B3 can operate at part-throttle, reducing fuel consumption and lowering sound levels, according to the manufacturer.

Durable, Easy-Riding Undercarriage The 259B3 has a standard, independent, fully suspended undercarriage. Designed and manufactured

by Caterpillar, the undercarriage uses four heavy-duty torsion axles (concentric tubular members buffered by an elastomeric material). These axles move independ-

At 35 percent tipping load, rated operating capacity for the 259B3 is 2,065 lbs. (937 kg), and 2,950 lbs. (1,338 kg) at 50 percent tipping load, increasing to 3,000 lbs. (1,360 kg) with the optional counterweight.

ently to isolate the machine chassis from the undercarriage and absorb much of the shock from rough-terrain operation. The customer realizes the benefits of suspension in the form of smooth travel, even at high speed, excellent load retention, increased productivity, as well as extended machine and undercarriage component life.

The undercarriage uses tripleflange cast-iron rollers equipped with Caterpillar’s Duo-Cone seals.

Large, heavy-duty idlers, front and rear, provide a generous radius that minimizes track bending — yielding longer track life — and contributes to a smooth ride. Front idlers incorporate a recoil system similar to that used on larger Cat track-type tractors.

Two heavy-duty, two-speed hydraulic motors power the 259B3’s planetary final drives, which drive single-piece steel sprockets. This powerful drive system combines with aggressive, steel-embedded rubber tracks that provide 59 in. (150 cm) of trackon-ground to keep the 259B3 moving productively in tough digging

or dozing operations and in poor underfoot conditions. The 259B3 can be equipped with either 12.6 in. (32 cm) tracks or 15.7 in. (40 cm) tracks depending on the customer’s requirements, which yield a ground pressure, respectively, of 6.0 psi (41.2 kPa) and 5.0 psi (34.4 kPa). The standard two-speed travel system is a true “no compromise” design. Planetary reduction drive motors provide increased torque for pushing, digging and dozing, while providing the speed for high productivity (up to 8.5 mph [13.6 kmh]).

High-Performance Hydraulics Hydraulic pumps for the 259B3’s implement system (boom and bucket) and auxiliary system (for powering work tools) are driven directly from the engine, eliminating intermediate drive belts to assure maximum efficiency, performance and reliability. The robust auxiliary system supplies oil flow up to 22 gpm (83 lpm) at pressures to 3,335 psi (23 000 kPa) — generating a calculated

hydraulic-horsepower rating of 42.8 (31.9 kW).

The 259B3 is equipped with Cat ToughGuard XT hydraulic hoses, for additional abrasion resistance, and auxiliary lines (with heavyduty, flat-face quick couplers) are attached to the lift arm. A universal work-tool coupler is standard equipment, and an optional hydraulically actuated coupler is available.

A high-efficiency hydraulic-oil cooler, working with a hydraulically driven cooling fan, keeps the 259B3 working efficiently in high ambient temperatures, even with continuous work-tool operation.

The optional variable-speed, ondemand hydraulic fan spins the fan only as fast as required by the machine, which improves fuelefficiency, reduces sound levels and provides faster machine warm-up.

Operator Comfort, Convenience and Safety Designed for optimal comfort, convenience and safety, the 259B3’s spacious operator’s com-

partment features low-effort, pilotcontrol joysticks — the right controlling lift and tilt functions, and the left, direction and speed. The joysticks provide precise proportional control of auxiliaryhydraulic functions, and optional deluxe joysticks expand the 259B3’s capability with control over work-tool electrical functions.

Both joystick choices provide the convenience of one-touch control of continuous or intermittent auxiliary flow.

The standard open ROPS canopy (with top and rear windows) can be fitted with a cab door, side windows, suspension seat, heater and air conditioning. With both hand and foot throttles as standard equipment, the 259B3 can be set for constant-speed operation (trenching or milling, for instance), or speed can be varied (truck loading and load-and-carry).

An anti-stall system is designed to prevent engine stalling, even at part-throttle, by constantly balancing speed and torque demands.

The redesigned dead-engine lower valve further promotes safe operation by providing an easierto-use, more-positive means of lowering the lift arms — allowing safe exit for the operator — if the machine should run out of fuel or the engine stall with the lift arms raised.

Easy to Service The 259B3’s rear door swings open to allow access to both sides of the engine and all routine maintenance points. A tilt-up cooling package permits the radiator and oil cooler to be quickly cleaned, and the tilt-up cab provides access to all major hydraulic components and lines. To further assist the service technician, all electrical wiring is color coded, and a Cat S.O.S.T sampling valve assures regular, accurate monitoring of hydraulic fluid.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 85

Abele Tractor www.abeletractor.com

Albany, NY 12205 518/438-4444 518/438-5751

Admar Supply Company, Inc. Rochester, NY 14623 585/272-9390 Vestal, NY 13850 800/836-2367 607/798-0333 www.admarsupply.com

866/390-2367

Buffalo, NY 14217 Cherr y Va l l e y Tractor 716/873-8000 www.cherr yvalleytractor.com 800/353-2367 Marlton, NJ 08053 856/983-0111

E. Syracuse, NY 13057 315/433-5000 800/293-2367

Eagle Power & Equipment Company www.EaglePE.com

Montgomeryville, PA 18936 215/699-5871 Eagle, PA 19480 610/458-7054 East PBE, Inc. Newington, CT 06111 860/665-7470

Erb & Henr y Equip., Inc. Harter Equipment, Inc New Berlinville, PA 19545 Millstone Twp, NJ 08535 732/446-7600 610/367-2169 1-888-HARTER-1 Farm-Rite Inc. Shiloh, NJ 08353 800/752-6373 856/451-1368 Calverton, NY 11933 631/284-3127

Marshall Machiner y, Inc. Honesdale, PA 18431 570/729-7117

Messick’s

Westchester Tractor Inc.

Abbotstown & Elizabethtown, PA 800/222-3373

Brewster, NY 10509 845/278-7766 845/278-4431

www.messicks.com

Pine Bush Equipment Co, Inc.

www.pbeinc.com

Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

www.wtractor.com

Page 86 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wacker Neuson to Hold Trowel Challenge at 2011 WOC Wacker Neuson’s World of will advance to the finals on Jan. 21 Concrete booth will once again be a at 3:00 p.m. and compete for the show destination for concrete finishgrand prize. All registered World of ers. The third annual Wacker Concrete contractor attendees are Neuson Trowel Challenge competieligible to compete on a first-come, tion will take place during the World first-serve basis. of Concrete, Jan. 18 to 21, 2011, in Las Vegas. The grand prize, a cusRoad to WOC tomized Wacker Neuson CRT 48The 2011 ride-on concrete trowel 35VX ride-on trowel powered by a grand prize has been donated as a special Vanguard BIG BLOCK Vjoint venture between Briggs & twin engine will be awarded to the Stratton Commercial Power and fastest finisher.

Wacker Neuson. Contractors in Held in Wacker Neuson’s outselect U.S. cities can see this special door exhibit, (#O30247, silver lot) edition trowel as it follows a tour the ride-on challenge tests the operroute to World of Concrete. The ator’s entire range of skills as the ride-on trowel will be on display at participant maneuvers around an dealer open houses until it reaches obstacle course that weaves Las Vegas in January. throughout a 2,400 sq. ft. slab. The Wacker Neuson will offer free 2010 winner, Lee Hadenfeldt, H&H exhibits-only admission information Concrete and Construction, to World of Concrete during the Doniphan, Neb., finished with a dealer events. Additionally, one two-run combined winning time of lucky contractor per event will be 68:16. registered as a semifinalist to win a Preliminary trowel challenge free WOC package including airfare competitions will be held at the and hotel stay in Las Vegas during World of Concrete during show Held in Wacker Neuson’s outdoor exhibit, the ride-on challenge tests the operator’s entire range of the show. hours on Jan. 18 to 20, 2011. The skills as the participant maneuvers around an obstacle course that weaves throughout a 2,400 sq.

For more information, visit top 10 times from the preliminaries ft. slab. www.trowelchallenge.com.

Sonic Sampling & Supply Introduces Mobile 1500 Drill Morooka dealer Sonic Sampling & Supply introduced the new mobile Sonic Drill 1500. The platform for the sonic drill is a Morooka 1500VD rubber track carrier.

Sonic Sampling and Morooka have teamed with Mobile Drill International to build the Mobile Sonic Drill 1500. This new platform is designed for mineral exploration, geoheat loop installations, geo-construction, environmental and geotechnical applications.

“I am excited about our relationship with Sonic Sampling. Their use of our Morooka carrier as a platform for innovative sonic drilling solutions introduces Morooka to a new customer base. I know these specialists are going to be extremely pleased with our product,” said Ken Byrd, president, Morooka USA-East.

“By offering a carrier vehicle that not only has all-terrain capability, but equally important has the proven dependability of the Morooka line, we now have a great solution to meet our customer’s needs. Morooka will help our customers gain access to remote sites where sonic technology has yet to drill,” stated Mike Casey, president of Sonic Sampling and Supply.

For more information, visit www.sonicsampling.com, www.morookacarriers.com.

The new Mobile Sonic Drill 1500 is designed for mineral exploration, geo-heat loop installations, geo-construction, environmental and geotechnical applications.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 87

Number One in Value

Lokotrack ST Mobile Screens

With your name and reputation on the line every day, you need to do the job right. That means you need the best equipment – a Lokotrack ST Series mobile screening plant.

Unmatched in value, they provide the ideal solution for jobs that require high production, fine screening and multiple products.

Mobile, easy to operate and cost effective – that’s the value of a Lokotrack mobile screen.

Contact your local Metso distributor today! www.metso.com

TYLER EQUIPMENT

EDWARD EHRBAR, INC.

MILTON CAT

6LQFH

Aggregates, quarry, contractor & recycling customers in Connecticut

Aggregates & quarry customers in New York City and surrounding counties

www.tylerequipment.com

www.ehrbar.com

1980 Berlin Turnpike Berlin, CT 06037 860-356-0840 800-352-4473 860-828-6727 fax

4 Executive Plaza Yonkers, NY 10701

914/738-5100 Long Island: 601 Coates Ave Holbrook, NY

631/563-7600 New York City

718/626-3331

Aggregates, quarry, contractor & recycling customersinMaine,RhodeIsland,Vermont, New Hampshire & Massachusetts; Contractor & recycling customers in New York state, excluding New York City and surrounding counties

www.miltoncat.com 55 Industrial Park Drive Binghamton, NY 13904

607/772-6500 294 Ainsley Drive Syracuse, NY 13210

315/476-9981 500 Commerce Drive Clifton Park, NY 12065

518/877-8000 4610 E. Saile Drive Batavia, NY 14020

585/815-6200

CB CON-AGG

3105 Route 219 Lantz Corners, PA

&%

814/778-5250

&RQ $JJ Aggregates, quarry, contractor and recycling customers in Pennsylvania

www.cbconagg.com 5300 Paxton Street Harrisburg, PA 17111

717/564-2121 Old Town Rd & Rte. 879 Clearfield, PA

814/765-1611 11 Progress Drive Cranberry Twp., PA

724/776-7660 3950 Depot Road Erie, PA

814/898-3388 1500 S. Altamont Blvd.

Frackville, PA

570/874-3560 146 Rose St. Indiana, PA

724/463-8743

US Rt. 6 East Mansfield, PA

570/662-7171 4565 William Penn Hwy. Murrysville, PA

724/327-1300 168 Industrial Park Road Somerset, PA

814/445-7915 2995 Stewart Drive State College, PA

814/237-8338 Rt. 54 & I 180 (Exit 5) Turboville, PA

570/538-2551 Wilkes-Barre Twp. Blvd.

Wilkes-Barre, PA

570/822-8141 4326 Oregon Pike Lancaster, PA

717/859-4905 309 Foothills Lane Mount Pleasant, PA

724/696-4080 590 Suscon Road Pittston, PA

570/883-1044

Page 88 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

value

LOADED WITH

Takeuchi Appoints Vranches National Sales Manager

With TEREX, value takes many forms. Start with high quality equipment designed to improve productivity and return on investment. Add inherent product dependability and the expertise and support capabilities of TEREX and its dedicated dealer organization. Choose from the broadest, most diversified line of equipment in the industry. Then top it off with our customer friendly philosophy and you experience the TEREX value proposition.

John J. Vranches will lead the company’s initiative to establish continued market leadership within the compact construction equipment industry segment.

CONTRACTORS SALES, INC. PO Box 12010 Albany, NY 12212 518-456-1445

©2004 Terex ACP.TRX.TX8503

Takeuchi Manufacturing US has appointed John J. Vranches as national sales manager of its North American sales operations division. Vranches, an industry veteran, will lead the company’s initiative to establish continued market leadership within the compact construction equipment industry segment.

Previously, Vranches was a regional business manager of both the company’s mid-atlantic and northeast division and stems from a strong retail background with both Volvo CE NA and Hitachi Construction Machinery.

“Takeuchi is a multimillion dollar

worldwide company that is poised to reach its potential in North America. Outstanding people, superior product, and corporate investment commitments promise to deliver the kind of value our customers require to sustain profitability during all cycles of our economy. I am looking forward to fully supporting our regional staff and dealer network in this unique time and continued growth in Takeuchi history,” said Vranches.

Vranches replaces Mike Ross, who now serves as Takeuchi’s director of operations.

For more information call 706/693-3600 or visit www.takeuchi-us.com.

Astec Industries Reports Third Quarter Results Revenues for Astec Industries Inc.’s third quarter of 2010, which ended Sept 30, were $177.9 million compared with $166.1 million for the third quarter of 2009 for a 7.1 percent increase. Domestic sales were $98.6 million during the third quarter of 2010 compared to $101.3 million during the third quarter of 2009 for a decrease of 2.6 percent. International sales were $79.3 million during the third quarter of 2010 compared to $64.8 million during the third quarter of 2009 for an increase of 22.4 percent.

The company reported net income attributable to controlling interest of $7.4 million for the third quarter of 2010 compared to net income attributable to controlling interest of $3.3 million for the third quarter of 2009 for an increase of 124.2 percent. Net income attributable to controlling interest for the third quarter of 2010 was $0.32 per diluted share compared to $0.15 per diluted share for the third quarter of 2009 for a 113.3 percent increase.

The company’s backlog at Sept. 30, 2010, was $145.6 million compared to $144.3 million at Sept. 30, 2009 for a 0.9 percent increase.

Commenting on the announcement, J. Don Brock, chairman and chief executive officer, stated, “We saw a marginal improvement in revenue for the third quarter, and a significant improvement in our net income. This increase was attributable to the downsizing we did in 2009, more productive fabricating and machine tools, increased parts sales and improved utilization of capacity. During the quarter, weakness in the domestic markets was offset by increases in international sales and parts sales.

“We expect to see a continued weakness in domestic sales for the next 12 to 24 months. This could change with passage of a new Federal Highway Bill. To sustain and grow our revenue during these uncertain times, we are increasing our sales, service and parts personnel throughout the world. We are also increasing our presence in the mining industries and growing our product offering in the energy business.

“Considering the severity of the continuing economic downturn, we are pleased with our results and feel that we are positioned to take advantage of any opportunities that may occur,” Brock added.

Astec Industries, Inc. is a manufacturer of specialized equipment for building and restoring the world’s infrastructure. Astec’s equipment and manufacturing operations are divided into four primary business groups: aggregate processing and mining equipment; asphalt production equipment; mobile asphalt paving equipment; and underground boring, directional drilling and trenching equipment. The other group contains wood processing equipment manufacturing and Australian distribution for several of the Astec companies as well as corporate.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 89

Page 90 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 91

The Difference is in the D-tails.

You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors.

D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options such as electrohydraulic joysticks, variable boom and bucket speed settings, and more than 100 attachments to let you take on more tasks.

Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to become owner and operator favorites. Ask for a demo today.

www.johndeere.com DOYLE EQUIPMENT CO. 20400 Rte 19 North Cranberry Twp, PA 16066 724/776-3636 Rte 66 South Delmont, PA 15626 724/837-4500

JESCO, INC. 118 St. Nicholas Ave. South Plainfield, NJ 08070 908/753-8080 1790 Route 38 Lumberton, NJ 609/267-2020 1275 Bloomfield Ave. Fairfield, NJ 07004 973/227-2221 800/321-8080 Fax: 973/575-5553 Middletown, DE 302/376-0784

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 White Plains, MD 301/870-1438 495 Fishkill Avenue Beacon, NY 12508 845/831-1800 800/724-0725 Fax: 908/821-1671

LAPIETRA MACHINERY & EQUIPMENT 5320 Third Avenue Brooklyn, NY 11220 800/942-9950

LESLIE EQUIPMENT COMPANY 6248 Webster Road Cowen, WV 26206 304/226-3299 www.lec1.com 136 Clifftop Drive Beaver, WV 25813 304/255-1525

Rt. 33 West Norton, WV 26285 304/636-6421 19 Goff Crossing Drive Cross Lanes, WV 25313 304/204-1811 Fax: 304/204-1811

W.I.CLARK COMPANY 30 Barnes Industrial Park Rd. Wallingford, CT 203/265-6781 www.wiclark.com Brookfield, CT 203/775-1203 Plainfield, CT 860/546-4808

Page 92 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

UPCOMING SPECIAL SECTIONS ISSUE

26

Underground Utility Ad Closing Date Publishing Date

ISSUE

4

Excavators & Attachments Ad Closing Date Publishing Date

ISSUE

6 8 10

March 11, 2011 March 19, 2011

Paving, Compaction, Milling Ad Closing Date Publishing Date

ISSUE

February 11, 2011 February 19, 2011

Skid Steers & Attachments Ad Closing Date Publishing Date

ISSUE

December 13, 2010 December 22, 2010

April 8, 2011 April 16, 2011

Wheel Loaders, Tool Carriers Ad Closing Date Publishing Date

May 2, 2011 May 11, 2011

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 91

Elliott & Frantz 450 E Church Road

A HIGH-YIELD INVESTMENT

King of Prussia, PA 19406 610/279-5200 6680 Allentown Blvd.

Harrisburg, PA 17112 717/652-5430 10421 Guilford Road Jessup, MD 20794

TOOLS FOR EARTHMOVING

410/792-9134

CRAWLER & WHEELED EXCAVATORS

105 Oakridge Place Hagerstown, MD 21740 301/733-8100

Rte 13, PO Box 368 Delmar, DE 19940 302/846-3033 VA: 1-800-220-3015 Increasing has never Increasing your your net net worth worth has never been been easier easier thanks thanks to to TEREX tailswing Designed to TEREXconventional conventionaland andzero zero tailswingexcavators. excavators.

Designed make youyou more money thanthan any other leading brand,brand, our comto make more money any other leading our pact powerhouses set the standard for productivity, versatility compact powerhouses set the standard for productivity, versaand Standard hydraulics offeroffer three connections for tility reliability. and reliability.

Standard hydraulics three connections immediate, dual reacting capabilities. comes for immediate, dual reacting capabilities.AAquick quick coupler coupler comes

standard standard for for fast fast and and easy easy attachment attachment changeovers. changeovers.

Meanwhile, Meanwhile, the the articulating articulating boom boom cylinder cylinder isis enclosed enclosed and and located locatedon onthe theleft leftside sideofofthe themachine machinefor forultimate ultimateprotection protection and longer wear.

The result?

ROI that’s anything but standard. and longer wear. The result? ROI that’s anything but standard.

For products, contact (insert Dealer Formore moreinformation informationononTEREX TEREX products, contact your local Name dealer.here) today at (insert Dealer Phone here).

www.terex.com

Page 94 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.terex.com

Keil Equipment Company, Inc. 2356 Route 9 Hudson, NY 12534 518/537-6221

©2004 Terex ACP.TRX.TX8503

Cat Financial Announces Third-Quarter 2010 Results Cat Financial reported third-quarter revenues of $640 million, a decrease of $36 million, or 5 percent, compared with the third quarter of 2009. Third-quarter profit after tax was $73 million, a $3 million decrease from the third quarter of 2009.

The decrease in revenues was principally due to a $46 million impact from lower earning assets (finance receivables and operating leases at constant interest rates) and a $13 million unfavorable impact from lower interest rates on new and existing finance receivables, partially offset by a $24 million favorable change from returned or repossessed equipment.

Profit before income taxes was $89 million for the third quarter of 2010, compared to $80 million for the third quarter of 2009.

The increase was principally due to a $24 million favorable change from returned or repossessed equipment, an $8 million decrease in the provision for credit losses and a $6 million increase in other miscellaneous revenue items.

These increases in pre-tax profit were partially offset by a $17 million unfavorable impact from lower average earning assets and a $10 million increase in general, operating and administrative expense.

The provision for income taxes in the third quarter reflects an estimated annual effective tax rate of 24 percent, reduced by a benefit of $12 million related to a prior year.

The estimated annual tax rate of 24 percent is up from 20 percent in the third quarter of 2009 and 22 percent in the second quarter of 2010.

New retail financing was $2.5 billion, an increase of $706 million, or 40 percent, from the third quarter of 2009. The increase was primarily related to improvement in North America, Europe and Asia-Pacific operating segments.

At the end of the third quarter of 2010, past dues were 4.88 percent, down from 5.33 percent at the end of the second quarter and 5.54 percent at the end of 2009. At the end of

the third quarter of 2009, past dues were 5.79 percent. The reduction in past dues from year-end is primarily due to the general improvement in global economic conditions.

Bad debt write-offs, net of recoveries, were $78 million for the third quarter of 2010, up $13 million from the third quarter of 2009. The increase in write-offs reflects the lingering effect the economic downturn has had on some of our customers, most notably U.S. and European customers in the housing and general construction industries.

Third-quarter year-to-date 2010 annualized losses were 1.03 percent of the average retail portfolio, compared to 0.90 percent for the same period in 2009 and 1.03 percent for the full-year 2009.

At the end of the third quarter of 2010, Cat Financial’s allowance for credit losses was 1.61 percent of net finance receivables, decreasing from 1.64 percent on Dec. 31, 2009, and 1.62 percent at the end of the third quarter of 2009. At the end of the third quarter of 2010, the allowance for credit losses totaled $367 million, compared with $377 million on Dec. 31, 2009, and $381 million at the end of the third quarter of 2009. The decrease of $14 million in allowance for credit losses year over year reflected an $11 million decrease due to a reduction in the overall net finance receivable portfolio and a $3 million decrease associated with the lower allowance rate.

“Portfolio performance continued to strengthen during the third quarter,” said Kent Adams, Cat Financial president and vice president of Caterpillar Inc. “Pretax profitability increased $9 million as this improvement more than offset the impact of lower average earning assets. Our past dues have decreased to the lowest level since 2008 and our third quarter new retail financing is up 40 percent from last year. As business continues to improve, we’ll maintain our focus on serving our Caterpillar customers and dealers, managing the portfolio and ensuring we have ample liquidity.”

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today!

Toll Free 800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 95

www.shawmutequipment.com

300 S. Randolphville Rd. at Route 287 Piscataway, NJ 08855 800/446-3362 22 Peconic Ave. Medford, NY 631/207-2900

1130 Zerega Ave Bronx, NY 718/822-1179

20 Tolland Turnpike Manchester, CT 06042 800/829-4161

Black Horse Pike Williamstown, NJ 856/875-0036

136 Eastman St. South Easton, MA 02375 877/526-9213

1440 Route 9W Marlboro, NY 12542 845/236-3000

327 King William Rd. Saint John, NB Canada E2M 7C9 888/594-8444

Philadelphia, PA 800/220-4033

Pittsburgh, PA 800/692-7600

Harrisburg, PA 800/325-6455

Syracuse, NY 800/368-6455

Lancaster, PA 877/503-4307

Albany, NY 518/357-2200

Wilkes-Barre, PA 866/667-6756

Page 96 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

‘Special Projects Division’Takes on Multiple Challenges DAM from page 14

the new dam surface, made up of 80 cu. yd.

(61 cu m) of concrete, will be constructed from cast in place concrete reinforced with rebar.

To remove the shot concrete facing that had been applied to the surface of the dam in the 1980’s Pizzagalli is using concrete saws and jackhammers.

“When we were originally studying how to approach this job one of our thoughts was

to use remote controlled mini excavators with hydraulic hammers to break away the shot concrete surface. However, by the time we factored in the costs of stronger scaffolding to support the excavators and the rental cost for renting the highly specialized remotely controlled hydraulic excavators with hammers, from a cost standpoint we were better off using laborers with handheld power saws and jackhammers,” said Justin Reed, project manager.

The only way for workers to get in and out of the dam is this 60 ft. ladder up the side.

The dam over the Winooski River is being rehabbed: the old shot concrete surface has to be removed using concrete saws and jackhammers.

“We have run into a couple of challenges from the start with this job, the first of which was bidding the job itself. The job was bid in March and with the spring runoff and heavy rains there was several feet of water flowing over the dam, obstructing the view of much of what we needed to see to prepare our bid.

We did the best we could with the limited visibility, fortunately for us we hit the mark on what was needed to be done and the project is working out just fine for us.”

“The other challenge was getting the scaffolding generators and other needed materials down to the base of the dam and removing the demolition debris back up to the top as we broke loose the shot concrete surface of the dam,” Reed continued.

The base of the dam, where most of the work is taking place, cannot be accessed by any type of equipment — all materials, tools, etc. have to be lowered from the top of the dam. Adding to the challenge was the fact that the top of the dam was not easily accessible to bring in the type of crane necessary for these types of picks. Any equipment going through the dam had to be transported through a tight residential area, through a road that in places is no wider than 13 ft. (4 m), and had large trees growing in very close to the sides of the road.

“It was obvious that a crane was the tool to use, but finding a crane that could access the job site and give us the amount of reach we needed was the challenge. In most cases you would use a lattice boom crane, but having to transport the crane through a small residential area and then down a winding

overgrown path that only offered 13 feet of clearance was a challenge,” Reed said.

“Our company has a long standing relationship with Woods CRW and their crane experts in Burlington, Vt. They worked closely with us to identify that the specs of the Link-Belt TCC750 could accomplish what we were looking to do. The telescopic boom and the adjustability built into the track system made this crane the obvious choice.

“Transport into the site was relatively easy and setup was a breeze. If we had had to use a lattice boom crane there would have been no place or room to lay the booms down and we would have been looking at about four loads to bring it in versus just two with the Link-Belt TCC750. From the tip of the extended crane to the bottom of the dam is about a 200 foot drop and we are bringing materials in and out all day. The entire setup works flawlessly.”

Link-Belt TCC750 Fits the Bill With an adjustable track width the LinkBelt TCC750 can be contracted to a width that does not exceed 11 ft. 5 in. (3.5 m). The total length of the crane, when ready for transport, is 45 ft. (13.7 m) and 10 ft. 9 in. (3 m 22.9 cm) high. The entire crane can be transported in two loads.

With the configuration at this site the crane has 150 ft. (45.7 m) of boom and was handling 4,000 lbs. (1,814 kg) loads at more than a 100-ft. (30 m) radius. see DAM page 98

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 97

Page 98 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Woods CRW Assists in Finding Right Crane for Tricky Job DAM from page 96

The Link-Belt TCC750 used on this project: • Has 115.6 ft. (35.2 m) of main boom and extends another 35 ft. (10.6 m) with a lattice fly.

• Has all hydraulic pilot operated controls • Because of the telescopic boom, the boom completely retracts to the length of the crane (approximately 45 ft. [13.7 m]) • The width of the crawler tracks can be extended out and retracted back in from 17 ft. (5.1 m) to 11 ft. 5 in. (2.6 to 4.3 m), making the crane transportable into tight spots. Load charts are available for 11 ft. 5 in., 14 ft. 11 in. (4.3 m 2.6 m) and 17 ft. of track width.

Pizzagalli Construction Company Pizzagalli’s corporate headquarters are in South Burlington, Vt.; it also has offices in Portland, Maine, and Garner, N.C. The 100 percent employee-owned company handles as much as $300 million worth of construction projects a year, most occur up and down the east coast, east of the Mississippi River.

For more information, call 802/651-1378 or visit www.pizzagalli.com.

Woods CRW Wood’s CRW Corp. is a customer service driven, heavy construction equipment distributor founded in 1961 in South Burlington, Vt. It is the Link-Belt crane distributor for New England and New York. (Excluding New York City and Long Island).

For more information on the TCC750 Please, call 802/658-1700 or visit www.woodscrw.com.

(Editor’s note: This article originally appeared in the New England state supplement.) CEG

Pizzagalli’s laborers work from scaffolding using concrete saws and jackhammers to remove the concrete skin of the dam.

Truck Maker Volvo Returns to Profit in Third Quarter 2010 ASSOCIATED PRESS WRITER

STOCKHOLM (AP) Swedish truck maker AB Volvo said Oct. 22 it returned to a profit in the third quarter, helped by strong demand in Brazil, India, China and Russia as well as a rebound in its mature markets.

The Goteborg-headquartered group reported a net profit of $421 million in the quarter, in contrast with last year’s loss.

Revenues soared 32 percent.

Volvo said almost half of its total sales came from outside its traditional markets, including Brazil, India, China and Russia, but that both North America and the European truck market were performing well, too.

Volvo CEO Leif Johansson said the launch of a new type of trucks in North America — equipped with engines that meet new tough emission regulations — have been well received by the market there.

“We are continuing to hear many positive comments about the trucks from our customers,” he said.

In Europe, Johansson said the market is recovering at a good pace, particularly in the central and northern parts of the continent.

“The recovery there has been somewhat swifter and stronger than we expected, and we have progressively increased the rate of production in our plants to meet the rise in order intake,” he said.

The Truck unit, which is Volvo’s largest, reported a 36 percent increase in sales for the quarter.

The group also maintained its 2010 forecast for heavy duty trucks, predicting a 2030 percent total growth in the North American market, and 10 percent in the European market.

Sydbank analyst Morten Imsgard said that the report looked “pretty strong” overall, especially the truck order intake.

He said the development in South America and Asia looks very promising for the future, coupled also with the improvements in Europe and North America.

“This is a sign that revenues can grow in the coming quarters,” he said.

Volvo, which has around 90,000 full-time staff, also makes buses, engines and construction equipment. It sold its car division to U.S.-based Ford Motor Co. in 1999, which in turn sold it to China’s Geely Holding Group earlier this year.

he was killed by a drunk driver.

to wear on spring break. She wore them only once Don’tdriver.

Let Friends Drive Drunk. before she was killed by a sdrunk

Friends Don’t Let Friends Drive Drunk.

Photo by Michael Mazzeo

By Lousie Nordstrom

on spring break. She wore them only once

Amanda Geiger bought these sunglasses

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 99

MIDLANTIC MACHINERY INC.

2240 Bethlehem Pike Hatfield, PA 19440 215/822-0145 Harrisburg, PA 717/652-3190 Baltimore, MD 410/247-2100 Delmar, DE 302/846-0224 Odessa, DE 302/449-2850 Downingtown, PA 610/518-5870 Wilkes-Barre, PA 570/824-9891

100%

loaded

(with features that deliver results) When it comes to loading and hauling large amounts of material, speed and capacity mean productivity. But to turn that productivity into profitability, you have to consider maintenance, fuel efficiency and reliability. The Komatsu WA600-6 and HD605-7 fit this equation perfectly.

• Fuel-efficient, Tier-3 engines and optimized hydraulics deliver maximum work per gallon.

• Precise, responsive controls allow for faster cycle times.

• Advanced diagnostic technology simplifies maintenance and service.

When every minute—and every dollar—count toward your bottom line, rely on the rugged dependability of precision-engineered machines that are…

100% Komatsu.

866.513.5778

www.komatsuamerica.com

PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-4311 Somerset, PA 814/443-2867 Cambridge Springs, PA 814/398-8819 NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822 NEW HAMPSHIRE Manchester, NH 603/627-7696 MAINE Cumberland, ME 207/829-6969 Bangor, ME 207/942-0177 VERMONT East Montpelier, VT 802/223-9689 EDWARD EHRBAR, INC

www.ehrbar.com 4 Executive Plaza Yonkers, NY 10701 914/738-5100 Holbrook, NY 631/563-7600 New York City, NY 718/626-3331 42 Kenosia Ave. Danbury, CT 203/743-0088

BINDER MACHINERY CO.

C.N. WOOD CO, INC.

PINE BUSH EQUIPMENT, CO. INC.

EAST PBE, INC.

2820 Hamilton Blvd.

South Plainfield, NJ 07080 908/561-9000 201 North Route 73 Winslow Township, NJ 08095 856/767-5900

Avon, MA 508/584-8484 Woburn, MA 781/935-1919 Whately, MA 413/665-7009 Johnston, RI 401/942-9191

Route 302, P.O. Box 106 Pine Bush, NY 12566 845/744-2006 Holmes, NY 12531 845/878-4004

283 Pane Road Newington, CT 06111 860/665-7470 Fax: 860/665-7478

Page 100 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CNH Third Quarter Financial Results Rise 20 Percent CNH Global N.V. announced financial results for the third quarter ended Sept. 30, 2010. For the quarter, net sales increased 19.6 percent (19.8 percent on a constant currency basis) to $3.5 billion due to solid performances delivered in the Americas and other regions augmented by a stabilization of trading conditions in Europe.

Equipment operations posted an operating profit of $239 million as a result of higher volumes, reduced industrial costs, and favorable product mix.

Net sales were 78 percent agricultural equipment and 22 percent construction equipment for the quarter, as improving construction equipment unit demand continued to bring the group’s revenue distribution back to historical norms.

The geographical distribution of revenue for the period was 44 percent North America, 19 percent Western Europe, 19 percent Latin America, and 18 percent Rest of World.

Equipment operations generated $1.2 billion in cash flow from operating activities over the first three quarters of the year. Year-todate capital expenditures totaled $153 million, a 11 percent increase from the comparable period, primarily in preparation for new product launches and engine emissions compliance upgrade; full year capital expenditures are expected to be in the $300 million range.

CNH’s equipment operations ended the period with a net cash position of $1.8 billion, an increase of $1.9 billion compared to the end of the third quarter in 2009. The 33 percent effective tax rate for the third quarter 2010 is within the group’s long term expectations of 32 percent to 36 percent, as a result of tax incentives and tax return to provision filing differences, which largely offset the impact of not recording a tax benefit on losses in Europe for which conditions for their recognition are not currently satisfied.

Net income before restructuring and exceptional items for the period of $102 million ($83 million inclusive of exceptional items) resulted in the group generating a third quarter EPS of $0.43 ($0.35 inclusive of exceptional items) compared to a loss of $0.09 in the comparable prior year period.

CNH’s equipment operations ended the period with a net cash position of $1.8 billion, an increase of $1.9 billion compared to the end of the third quarter in 2009 2010 Market Outlook CNH anticipates that global agricultural equipment markets will be up 0 to 5 percent for FY 2010. The CNH outlook for the global construction equipment markets is for an increase of 40 percent to 45 percent in 2010.

2010 CNH Outlook In view of the group’s performance through the first three quarters and current forecasts for trading activity in the remainder of the year, CNH anticipates that it will achieve the following financial targets: Net Sales in excess of $14.3 billion, operating profit of $900 million and net industrial cash of $1.3 billion.

Agricultural Equipment Industry and Market Worldwide agricultural industry retail unit sales decreased 1 percent compared to the third quarter of 2009. Global tractor sales fell 1 percent while global combine sales grew 6 percent for the quarter.

North American markets rose 2 percent, with tractor sales up 2 percent and combine sales up 7 percent on continued strong demand from the large cash crop segments.

Sustained commodity prices and the continuation of government support programs drove demand in Latin America where tractor sales rose 21 percent and combine sales were up 16 percent.

The decline in equipment demand moderated in Western European markets which were down 5 percent for the quarter, with tractor sales falling 4 percent and combine sales down 13 percent. Rest of World markets were down 6 percent, with a 6 percent drop in trac-

tor sales and a 7 percent rise in combine sales.

CNH Agricultural Equipment Third Quarter Results Net sales in the agricultural equipment segment increased 12.8 percent for the quarter (13.4 percent on a constant currency basis) on the back of growth in demand in the Americas that more than offset the difficult, but stabilizing, trading conditions in Europe and Rest of World markets.

Operating margin increased to 8.5 percent from 6.5 percent from the comparable period in 2009.

This improved profit performance was largely the result of improved industrial economics, product mix, and favorable geographic distribution of revenues.

Company and dealer inventories ended the period largely in line with estimated market demand and historical norms for the period.

CNH production for the period was slightly below the pace of retail sales due to seasonal plant shutdowns, inventory balancing, and in preparation for new product launches.

CNH continued to invest in its agricultural equipment product portfolio and industrial capacity during the third quarter. The company continued to significantly invest in the launch of Tier IV/Stage IIIA product introductions with dealer and customer training programs completed during the period for the first products in the line-up, 4-wheel drive tractors. Investments in the group’s industrial footprint for both whole goods manufacturing and components supply continued in conjunction with the product plan

announced in April 2010.

Construction Equipment Industry and Market Global construction equipment industry retail unit sales rose 47 percent in the third quarter compared to the prior year, with light equipment up 34 percent and heavy equipment up 59 percent.

North American demand was up 34 percent, with light equipment volumes up 34 percent and heavy equipment rising 33 percent.

Western European markets rose 27 percent as the industry began to rebuild from the prior year’s low levels.

In Latin America, the market was up 85 percent, driven by strong demand from projects in public and private sectors. Industry sales in Rest of World markets rose 54 percent with continued strong demand in the Asia-Pacific region, primarily the heavy equipment segment in China.

CNH Construction Equipment Third Quarter Results CNH’s construction equipment segment net sales grew considerably, 52.4 percent (51.0 percent on a constant currency basis) driven by a robust recovery in demand in all regions compared with the low base in the third quarter 2009.

The segment posted an operating profit for the quarter of $4 million, compared to the $88 million loss in the comparable quarter in 2009, largely as a result of increased volume, reduced industrial costs, and increased capacity utilization.

Finished goods unit inventory levels (company and dealer) for the

segment declined from the comparative quarter. Due to inventory management in the prior period, production exceeded retail volume by 4 percent for the period as the group began to re-stock its dealer network with fresh product and in preparation for new product launches.

New product launches announced in April 2010 in both light and heavy construction equipment remain on track with performance, safety, styling, and emissions compliance features incorporated in the new designs.

The first global launch of the new Tier IV compliant backhoe, produced in three different regions, is on schedule with product deliveries commencing in October.

Financial Services’ net income for the quarter ending Sept. 30, 2010, was $47 million, an increase of $15 million compared to the quarter ending Sept. 30, 2009, as a result of higher loan originations in the agricultural equipment business and improved interest margins which were partially offset by higher provisions for credit losses in the agricultural portfolio. Due to the adoption of new accounting standards on Jan. 1, 2010, Financial Services was required to consolidate $5.7 billion of receivables and related liabilities in its balance sheet. Consequently, onbook receivables are higher compared to September 2009.

The managed asset portfolio decreased $416 million from September 2009 due to lower retail originations in the construction equipment market over the last 24 months. Delinquency indicators showed improvements in all loan portfolios.

Unconsolidated Equipment Operations Subsidiaries Third quarter results for the group’s unconsolidated equipment operations subsidiaries improved to $15 million from a $5 million net loss in the comparable period in the prior year as a result of robust market conditions in Turkey in agricultural equipment and improved relative performance of the Group’s construction equipment joint ventures.

For more information, visit, www.cnh.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 101

Waste not, expect more – Hyundai 9 Series machines are loaded.

Powerful Tier 3 Cummins Engines Advanced Hydraulic Technology Unparalleled Hydraulic Horsepower Heavy-Duty Design Industry-Best Total Coverage Warranty Industry-Leading Fuel Economy Industry-Leading Cycle Times

D E L AW A R E Folcomer Equipment Corp.

Greenwood, DE • 302.349.5760

M A RY L A N D Folcomer Equipment Corp.

Aberdeen, MD • 410.575.6580 Baltimore, MD • 410.247.7454 Upper Marlboro, MD • 301.627.3938 Frederick, MD • 800.951.2550

NDA

Y

A

T

W

3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

YU

I

Industry’s Best Total Coverage Warranty:

H

• • • • • • •

QUALITY

R R A N

MAINE Wallingford Equip. Co., Inc. Auburn, ME • 207.782.4886

NEW YORK George & Swede Sales & Service Pavilion, NY • 585.584.3425

TB Equipment & Rental Bangor, ME • 207.262.0014

A Montano Co., Inc. Saugerties, NY • 845.247.0206

www.hyundaiamericas.com

P E N N S Y LV A N I A Highway Equipment Company Zelienople, PA • 724.452.7800

Page 102 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Topcon Introduces New QS Robotic Total Station Series Topcon Positioning Systems, new generation of robotic total stations, the QS Series (Quick Station) — featuring the X-TRAC 8 prism tracking technology — is designed to “provide unprecedented power and speed to dramatically enhance productivity and save time and money on every job,” said Denny Welch, senior vice president of the TPS survey business unit.

Welch said, “The QS Series can be summed up in four words: Faster. Smarter. Farther. Stronger.

“With the new X-TRAC 8 technology, strong tracking and quick prism re-acquisition in any work site condition is assured. The QS represents around-the-corner design and technology that provides increased performance in even the most obstructed sites. Topcon continues to be an industry leader with long-range power. The QS is built to withstand the most adverse working conditions and the toughest job site locations,” Welch said.

The X-TRAC 8 technology incorporated in both the QS instrument and RC-4 QuickLock rover device “dramatically increases power for prism tracking. Employing entirely new optics, laser system, and further advanced algorithms, XTRAC 8 provides the QS instruments with an unsurpassed ability to keep tracking a moving prism no matter the job site obstacles,” he said.

The new RC-4, a compact QuickLock remote system that integrates an array of advanced technologies that “dramatically increases productivity on all survey projects” is designed for use with the QS, Welch said.

“The RC-4 uses dual lasers, a built-in spread spectrum radio and Topcon’s QuickLock technology to create on-thejob efficiencies from stakeout to topo and from construction layout to as-built surveys.

“These core technologies make the QS not only the most

dependable tool for surveying and stakeout,” he said, “but also has the industry’s most advanced sensor for highly productive, precision machine control systems.”

The RC-4 remote has dual laser emitters, which expand remote control coverage to speed up prism search and lock operations. A built-in spread spectrum radio provides a convenient data link between the QS and the field controller, eliminating the need for an external radio system or integrated controller system, according to the manufacturer.

Topcon has further enhanced the EDM processing engine in the QS that dramatically reduces measurement time for the hard-to-measure objects such as wet road surfaces or

Construction Crosswords Across

1 ____ 133x115 Crusher 2 Strategizes 3 Road cover

2

3

4

5

6 8

10

1 _____ C1130-2 4 Aerial lift brand 8 First name of Star Wars Jedi 10 ____ 710 Motor 13 Grader 11 Tow behind you 12 From the original manufacturer, abbr.

13 _____ MTL 16 18 Compact Track Loader 15 Manufacturing area 16 __ Mans 17 Lots of care and 22 attention, for short 18 Disconnects, in a way 21 A unit of power equal to 1000 watts 28 29 22 Cylindrical metal container 24 John Deere's ____ 34 1010 (goes with 30 across) 39 26 Yep's opposite 28 Silent OK 30 See 24 across 34 Rolls first aero engine 36 Radio band 37 Testing area 39 Ditch Witch's JT1220, for example 40 The Bobcat 2200 is this type of vehicle

Down

Topcon’s new generation of robotic total stations is the QS series (Quick Station).

1

manholes, darkest colored slopes or rocks. The QS system is complete with the addition of Topcon Tools and TopSURV software.

In combination with the 6,500 ft. (2,000 m) super-longrange non-prism capability, the QS provides ultimate power in distance measurements to ensure maximum productivity, according to the manufacturer.

Completely cable-free, the QS comes with one-, threeand five-second accuracy options, and has a full-color, graphical Windows CED interface.

For more information, call 925/245-8300 or visit www.topconpositioning.com.

7 9

11 12 14

15

16

17

19 20 24

23 26

21

25

27 30 35

31 36

32

33

37

38

40 Crossword by Myles Mellor

4 5 6 7

Beside Bumper __ bumper _____ 27500E4 Knuckleboom Allman NLPUFMXZ, for example (2 words) 9 Arts Degree 11 Computer maker 12 Chooses 13 _____ 1550C 14 Narrow projecting piece of land 19 _____ ROBEX 110 20 ____ Steer Loader

21 Knock out, for short 23 St Louis locale 25 Up in the air 27 Apply force to 29 Over, poetically 31 Friend, in French 32 Manning from NY 33 Sewer dweller 35 Guidelines, abbr.

38 Indicates the manufacturer

Read current and recent Construction Equipment Guide issues to find answers to several clues in Construction Crosswords. Look in every even-numbered CEG issue for new crosswords.

see page 118 for solution

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 103

We’ve become attached to your machines.

Sandvik (Rammer) G-Series hydraulic impact hammers

Sandvik (Rammer) E-Series hydraulic impact hammers

AR Series™ hydraulic impact hammers

Ho-Pac ® vibratory compactor/drivers

Pedestal Breaker System™ stationary boom systems

Contractor’s Mechanical Grapple material and waste handling systems

Sandvik (Rammer) S-Series hydraulic impact hammers

Where can you go to get high performance boom-mounted attachments?

And, now Allied adds to that great family background with the Sandvik (Rammer) and AR Series™ hammers.

Allied’s attachments don’t take a back seat to any competitor.

In particular, our Sandvik (Rammer) product features a long-stroke design, all oil operation and ProControl.

All of our high performance boom-mounted attachments are supported by the most respected parts and service organization in North America. Customer satisfaction is job one at Allied. Great products supported by people who know the industry and its customers. To put a high performance Allied attachment on your machine, call 1-800-321-1046 for the name of the Allied Distributor nearest you. We’ve become attached to your machines.

Allied Construction Products, LLC

For over 65 years, we’ve developed many attachments that are legendary in the construction and demolition industries that demand high performance. Names like Ho-Ram, Hy-Ram®, Rammer, Ho-Pac® and Pedestal Breaker System™ are names that equal: UÊSimple, proven design (Our attachments have high resale or trade-in value) U Reliable performance (If you purchased an Allied attachment, you’re probably still using it) U Superior productivity (Compare AEM– formerly CIMA– ratings, our attachments get the job done faster)

E & SW E RG

D

L SA

ES &

953 Bethlehem Pike Montgomeryville, PA 18936 215/699-5871 New Castle, DE 302/652-3028 Uwchlan, PA 610/458-7054

IN C.

*

*

E

GE O

©2009 Allied Construction Products, LLC

E, SERVIC

7155 Big Tree Road Pavilion, NY 14525 585/584-3425 Fax: 515/584-8853 www.georgeandswede.com

121 Karner Road Albany, NY 12205-5501 518/456-1445 Fax: 518/456-8600

Page 104 • November 24, 2010 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

BINDER MACHINERY 2820 Hamilton Blvd.

S. Plainfield, NJ 07080

908/561-9000

201 North Route 73 Winslow Township, NJ 08095

856/767-5900 MIDLANTIC MACHINERY

Route 13 N. Delmar, DE 19940

302/846-0224

CN WOOD CO., INC. 200 Merrimac Street Woburn, MA 01801

781/935-1919 Whately, MA

413/665-7009 Johnston, RI

401/942-9191 Avon, MA

508/584-8484 © 2008 ESCO Corporation.

PUMP REBUILDS

ALL MAKES & MODELS OF MACHINES SAVE UP TO 60%

• Full-Service Hydraulic Repair • Turnkey Hydraulic Systems • Hydraulic System Integration • Professional Field Service • Full Machine Shop • Hard Chrome Plating • Large Seal Inventory

SELL Used Heavy Equipment Parts SAVE ALL MAKES SAVE $$$ & MODELS $$$ We BUY Heavy Equip & Salvage Machinery We

By Sean Yoong

ASSOCIATED PRESS WRITER New Aftermarket Parts

RUTLAND,VT 802-773-5926 Check our inventory of machinery for sale at

WWW.CREANEQUIPMENT.COM

Call Ken or Marc

716/681-8474 Fax: 716/681-8514 4474 Walden Avenue Lancaster, NY 14086 sales@fluidpowerservice.com

ONE YEAR WARRANTY

WANT INFORMATION ABOUT GOVERNMENT JOBS?

CYLINDER REPAIR EXCHANGE

www.fluidpowerservice.com

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

Critics Call Plan to Build $1.6B 100-Story Tower in Malaysia as ‘Extravagant’

Want to know where to get this information?

All kinds of government information are just a click or call away.

1 (800) FED-INFO

KUALA LUMPUR, Malaysia (AP) The Malaysian government faced mounting opposition Oct. 20 to a $1.6 billion, 100-story skyscraper plan, with critics slamming the project as an unnecessary extravagance at a time of belt-tightening and rising prices.

Prime Minister Najib Razak insisted the privately financed building will boost business in Kuala Lumpur, Malaysia’s largest city, but the plan could hamper his ruling coalition’s efforts to regain support from many who believe that public funds are regularly abused to help the government’s allies grow wealthy.

More than 46,000 people had joined a Facebook group opposing the initiative as of late Oct. 20, only five days after Najib first mentioned it while announcing the government’s latest budget.

It is widely perceived to be a government project using taxpayers’ contributions, but Najib said the tower will

be part of a $1.6 billion urban development initiative spearheaded by Permodalan Nasional Berhad, a government-backed fund management firm.

“This project is not a waste” of funds, Najib told a news conference late Oct. 19. “We want a building that will become a symbol of a modern, developed country.”

Najib noted that former Prime Minister Mahathir Mohamad also faced resistance in the 1990s when he pushed for the 88-story Petronas Twin Towers, which were the world’s tallest buildings for several years and are now a source of pride for many Malaysians.

Hamad Kama Piah Che Othman, chief executive of Permodalan Nasional, said the company was well positioned to finance the construction from its own internally generated funds, the national news agency Bernama reported.

Opponents of the planned tower’s construction — scheduled to start next year and be completed in 2015 —said there is already a glut of office space

and that it would aggravate traffic jams.

Criticism has been particularly sharp amid other revelations about high government spending. Parliament was told that the cost of a new palace being constructed for Malaysia’s king was rising to nearly $250 million, while the official travel expenses of Najib and his deputy surged about 60 percent in the past year.

Opposition leaders say such an expenditure is reckless when the government is cutting back on gasoline and sugar price subsidies for the public to rein in its budget deficit.

Complaints about alleged government corruption and financial mismanagement caused many voters to turn against the National Front ruling coalition in 2008 elections.

Najib took office last year and pledged wide-ranging reforms to help the ruling coalition regain a two-thirds parliamentary majority, which it enjoyed for most of its 53 years of uninterrupted rule, in the next elections due in 2013.

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • November 24, 2010 • Page 105

Bulk Material Spreaders Available in Two Models

TurfEx’s bulk material spreaders have the ability to be used in a variety of applications from lawn care to golf course maintenance and also are capable of spreading snow and ice removal products.

TurfEx’s, line of bulk material spreaders are designed to mount on tractors, utility vehicles or pickup trucks and are equipped with an auger for feed and control of bulk material, including fertilizer, compost, pelletized lime, topdressing and other granular products. They have the ability to be used in a variety of applications from lawn care to golf course maintenance and also are capable of spreading snow and ice removal products.

The bulk material spreaders are available in two models: the MS-1875, which features a 9 cu. ft. (.25 cu m) capacity hopper with a 3-point style mount, and the MS-2000, which has an 11 cu. ft. (.3 cu m) capacity hopper and mounts to the bed of pickups and utility vehicles. Both models have adjustable stainless steel spinners and also have variable speed control. Spread width is adjustable up to 30 ft. (9 m).

Because the hoppers are constructed of heavy-duty polyethylene, common corrosion and maintenance concerns associated

with similar steel-built alternatives are eliminated. Though the hopper features thickwalled construction, the unit is up to 40 percent lighter than similar capacity steel-built options, making it easier to install or remove and reducing fuel consumption for the carrying vehicle, according to the manufacturer.

To utilize the receiver hitch without having to remove the entire spreader, the MS2000 is built with a quick-connect spinner assembly. After removing one pin, simply take off the spinner assembly and the vehicle’s hitch is exposed and easily accessible.

Each model is backed by a one-year warranty and comes standard with a top screen, fitted cover and vibrator in the hopper.

In addition to the bulk material spreaders, the new TurfEx line will offer many equipment solutions for the grounds maintenance professional, including tailgate-mounted turf care spreaders, spot sprayers, Groom ‘n’ Sweep broom attachments and turf boxes for equipment and material storage.

For more information, call 800/725-8377.

Page 106 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

The 2011 EZ-Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 25-hp KOHLER Diesel Engine .....$39,500 plus freight Other Screens Available www.ez-screen.com • 866/745-5828

24 EB

CLOSE OUT PRICING Enclosed and Open Utility Trailers. Year End Bargains.

610/534-0700 Rick at Stephenson Equip/Keesler Div. 23-24 KU

“RACKS OF TRACKS!!!!” $1,500,000 Inventory of High Quality Rubber Tracks to fit over 2500 models of construction equipment.

Up to 40% savings from OEM. $95 Next day delivery ...............Call Multi Machine Inc. 888-888-1248 23-24 RS

2011 EZ Screen 550, Works with 1 Yard Loader or 96” Bucket, Excellent 5’x4’ Vibratory Screenbox! Ideal for site cleanups. One man = 50 yards a day+. Talk to the folks that own them. 2 Year warranty. This will be the fastest payback of ANY machine you’ve ever bought. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEW $9,500 plus freight.

Other Screens Available www.ez-screen.com • 866-745-5828 24 EB

1994 John Deere 490E Excavator, Apx. 5000 Hrs, New Chains, Wide Track, 24” Digging Bkt, 42” Digging Bkt, 42” Clean Up Bkt, Good Condition ...... ..................$$30,000 2001 Mustang 2503, 3 cyl. Kubota diesel, like new rubber tracks, 2 spd., 2300 hours, 18” bucket, 6000-7000 $10,500 OBO lbs ..............................................................$ (610) 468-9924 23-24 AP

Excavator, Backhoe & Loader Buckets, New & used, over 200 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

Wayne Walton 413-626-9763 24 RS

23-24 AP

SEE YOUR BARGAIN AD IN COLOR. O N LY $ 5 0 E X T R A FOR TWO INSERTIONS

1986 John Deere 690 Excavator, 2 bucket & mechanical $13,000 thumb, Ready to Work ............................................$

George and Swede 585/584-3425

Did this ad catch your attention?

Color can work for you.

Call Construction Equipment Guide 800/523-2200

2006 Takeuchi TB175C Excavator, very good condition, +/1500 hours, bucket 36” with teeth - 12.2 cu ft capacity, additional 24” bucket, rubber tracks, heat & A/C in cab, AM/FM radio ................................................Asking $35,000

23-24 KH

Contact: Frank @ 203/667-8034

Here' s how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

23-24 RS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 107

Skyjack Appoints EMPLOYMENT OPPORTUNITY Territory Managers Needed Ken Myers as Its New President Linamar Corporation appointed Ken Myers as president of Skyjack.

Myers previously held the group president post for the powertrain division of Linamar’s automotive manufacturing sector. Prior to joining Linamar, Myers, career included Arvin Meritor Inc., of Troy, Mich., a manufacturer of automotive components for the passenger car and trucking industry.

He also has served as general manager of Roof Systems as well as general manager of Worldwide Stopping Systems and director of Worldwide Procurement. Myers replaces Steve Shaughnessey,who became president of Skyjack in January 2010.

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today!

Toll Free 800/523-2200

In business since 1946, Craig Manufacturing Ltd. is a leading North-American manufacturer of heavy equipment attachments. With offices in Hartland, NB and Cambridge, ON Craig has built a reputation for professional, friendly service, superior quality, and dependability.

Territory Manager

(CT/MA/MD/ME/NH/NJ/NY/PA/RI/VT) This position is for highly motivated Sales professionals who are committed to maintaining relationships with existing clients as well as developing relationships with potential new clients. You will be able to work with minimal supervision and be able to keep up in a fast-paced, ever changing environment.

Since this position will require extensive travelling, you must possess a valid Passport and own a reliable, presentable vehicle. Preference will be given to candidates who are centrally located in regards to the sales territory.

How can you help protect

the prairie and the penguin?

Qualifications: 3UHYLRXV VDOHV H[SHULHQFH LQ UHODWHG ILHOG )Dmiliarity with heavy equipment and/or attachments &ustomer Relationship Management software experience 6WUong organizational skills and attention to detail (WKical in business dealings ([FHOOHQW ZULWWHQ DQG YHUEDO FRPPXQLFDWLRQ skills 2XWVWanding customer service skills 7HFKQologically and mechanically inclined If this sounds like you please submit your resume and references to:

Simple. Visit www.earthshare.org and learn how the world’s leading environmental groups are working together under one name. And how easy it is for you to help protect the prairies and the penguins and the planet.

www.earthshare.org

One environment. One simple way to care for it.

®

Craig Manufacturing Ltd. 96 McLean Avenue, +DUWODQG 1% ( 3 . jclark@craigattachments.com &RQILGHQWLDO )D[

Heavy construction equipment distributor seeks motivated and experienced equipment salesperson to make immediate impact in popular urban market in MD & DE. Represent major manufacturers.

Full benefits, 401(k) and aggressive pay program. Reply with resume, references and performance record to: kuluski@cegltd.com or mail to: Construction Equipment Guide 470 Maryland Drive Box 93 Ft. Washington, PA 19034

Vocational Truck Product Support Representative TERRITORIES: The entire Alban geographic territory under contract for the sales and service of the new Caterpillar Vocational Truck, as well as all makes of competitive OnHighway vehicles.

HOURS: 7:30 am-5:30 pm or as dictated by daily activities QUALIFICATIONS NEEDED: 3-5 years experience with On-Highway Trucks. Previous sales experience desired but not required. Must be a strong communicator with excellent oral and written communication skills. Must be able to develop and execute effective action plans and handle customer situations to produce results. Must be well organized, able to prioritize workload and handle several tasks simultaneously to meet deadlines. Forecast and customer relationship management a must. Requires excellent computer skills and the ability to self develop and adapt to changing technology. Must have strong product knowledge of On-Highway Trucks and be capable of effectively negotiating and closing sales. Must be able to network and successfully work with other departments (Finance, Service, Parts, Rental, etc.). Must be capable of working independently and maintain positive thinking. Must be willing to travel and work flexible hours as needed. Must be able to work under pressure.

DUTIES: Responsible for selling and promoting the capabilities of the Alban Vocational and On-Highway Truck Service operations. Establish and maintain new customer contacts and generate service work for all Alban branches for On-Highway Truck Parts and Service sales.

BENEFITS: Health, Dental, Vision & 401(k) Please apply at www.albanhiring.com EEO/AA Alban Cat is a Drug Free Workplace

Page 108 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS Manlifts All Makes & Models Rental, Parts, Service, Training Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS Compressors AIRMAN COMPRESSORS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054 Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

APPRAISALS Appraisal J D Balsarini & Associates Appraisal/Auctions Jim Balsarini 800/637-5614 www.jimbalsarini.com

ASPHALT EQUIPMENT Asphalt Pavers 1992 Allatt SP-50, s/n 62A51, 4’6’’ sidewalk paver, clean and ready to work, good condition ..................................$14,500.

Central Equipment Company 207-827-6193 2005 Leeboy 8500, high deck, ready to go to work, good condition, 1200 hrs ........$29,000.

2006 Leeboy 8500, high deck, ready to go to work, good condition, 3200 hrs ........$35,000.

U.S. Municipal Supply, Inc. 610-292-9450 Leeboy Pavers Various Pavers in stock U.S. Municipal Supply, Inc. 800/733-3776

Leeboy Pavers Variety of Pavers in Stock Ask About Our Financing Specials!!

U.S, Municipal Supply Inc. 610/292-9450

Asphalt Rollers 2004 Cat CB534DXW, 832 hours ..........................$75,000 2005 Cat CS563E, 287 hours ..................................$75,000 2005 Cat CS563E, 1,778 hours ..................................$75,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

ATTACHMENTS Hammers 2003 Cat H160 ..........$55,000 2004 Cat H160 ..........$55,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Shears LaBounty Shears MSD1000R New $84,260 Used $69,900 MSD2000R New $131,600

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.

For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 BORING EQUIPMENT

Trenchless Technology TERRA PIERCING TOOLS, DIRECTIONAL DRILLS Sales, service, rebuilt units.

Bursters, Rammers, Compact Geothermal Drills, Shop Training National Distributor Fagan’s Lehigh Equipment 609/476-3481 800/458-5238 faganslehigh@comcast.net www.terra-trenchless.com

Drilling - Boring JONRENTS.COM Augers, Core Barrels, Pipe, All Foundation Equipment Air Compressors up to 1170 CFM - 800 PSI Gill Beetle Track Drills Turin Rotary Casing Advancement Systems Mantis Crawler Cranes & Chem Grout Equipment

COMPACTION EQUIPMENT Vibratory Compactors NEW & USED ROLLERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

MSD2500R New $170,390 Used $124,000

Misc. Compaction Equip.

MSD3000R New $197,560

2004 CAT 836G, 7159 hours.. ................................$355,000

Bob Harrell 609-685-6169

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Misc Attachments NEW & USED ATTACHMENTS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3208 Eagle PA 610/458-7054

CRANES Crane Inspections

ALL TYPES OF CRANES INSPECTED AND CERTIFIED Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 215-639-2579 Atlantic Crane Inpection Services Visit us at www.atlanticcrane.com

CRAWLER TRACTORS Crawler Tractor 1989 Caterpillar D5H, rebuilt U/C, 9275 hours.........$25,000.

Medico Industries 570/825-7711 2004 Cat D6RXLII, 4551 hours ..............$139,000 2004 Cat D8RII, 3406 hours ..............$369,300 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 1997 John Deere 650G, OROPS, pedal steer, 104’’ blade, 18’’ pads, new paint, very good condition, 8755 hours ........................$27,500.

2001 John Deere 750C, 24’’ pads, newer paint, 128’’ blade, very good condition, 6833 hours ........................$59,500.

JDE Equipment Co. 616/530-2000 2007 John Deere 450J, LGP, ROPS, hydro trans., 124’’ 6way blade, very good condition, 1072 hours ................$57,375.

2005 John Deere 650J, LGP, ROPS, hydro trans., 128’’ screen and sweeps, good condition, 1806 ..............$57,800.

1999 Halla HE220LC, 47,000 lbs., Cummins 5.9 diesel, plumbed for breaker & wrist, 70% U/C, runs well, 4700 hours ..................................$26,900.

Central Equipment Company 207-827-6193 2006 Cat 303.5CCR, 698 hours ..................$39,900 2005 Cat 330CL, 2,366 hours ..............$199,000 2003 Cat 345BL, 4,941 hours ..............$199,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 Long Reach Excavator Front Ends High Reach Demolition Front Ends Excavator Material Handlers Front Ends PLUS Stick Extensions In Stock, 8’-12’-16’ & 20’ Complete Package with Bucket Call Percy Ransome Phone: 856-608-6999 or Cell: 215-350-1165 Fax: 856-608-7999 longreachhighreach@gmail.com www.longreachhighreach.com

Mini Excavators NH Construction Equipment New & Used Parts & Service

For Sale or Rent All Makes and Models Modern Equipment Sales & Rental 800/445-4381 For Sale or Rent All Makes & Models Modern Equipment Sales & Rental 800/227-2525 FOR RENT Caterpillar Generator Sets 15KW to 1750KW Day, Week or Month with trailer, fuel tank, enclosure Alban Engine Power, Inc. Baltimore 301/796-8000 Washingotn DC 621-1424

HYDRAULIC HAMMERS Breakers ALLIED SALES/RENTALS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

LANDSCAPE EQUIPMENT Misc. Landscape Equipment

Modern Equipment Sales & Rental 800-445-4381

Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments!

FORKLIFTS

Rent or Purchase

Industrial Forklifts

Norris Sales Company 610/279-5777

Gradall/Lull Sales, Service, Training

Track Loaders

Industrial Tractor Co. Inc. 843-572-0400

Modern Equipment Sales & Rental 800/445-4381

Backhoe Loaders

EXCAVATORS

GENERATORS

NEW & USED BACKHOE LOADERS

Hydraulic Excavators

Generators & Gen Sets

Specializing in Truck Mounted Cranes

NH Construction Equipment New & Used Parts & Service

Modern Equipment Sales & Rental 800/445-4381

Modern Equipment Sales & Rental 800-445-4381

2007, IR/Doosan G570 Portable Generator, 570 KVA, trailer, good condition.............. ..................................$70,000.

305-949-2581

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 109

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24’’ bucket, very good condition, 71 hours ........................$58,635.

2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24’’ BH bucket, very good condition, 55 hours ........ ..................................$57,200.

2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24’’ BH bucket, excellent condition, 38 hours .......... ..................................$73,700.

2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24’’ BH bucket, excellent condition, 384 hours ..........$57,300.

2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24’’ BH bucket, good condition, 2862 hours ................$39,500.

Industrial Tractor Co. Inc. 843-572-0400

Skid Steer Loaders 2007 JCB 180T, canopy Servo controls, 12’6’’ tracks, 56 HP, 9’6’’ hinge pin height, ROC load 1896 lbs. Demo model.

Pictures available, 10 hours.... ..................................$28,500.

Farm-Rite Inc. 908/625-0697

Wheel Loaders 2006 Cat 904B, 3,456 hours .. ..................................$29,000 2005 928GZ, 2519 hours........ ...................................$87,300 2006 Cat 972H, 3,180 hours .. ................................$229,000 1998 Cat 990 ..........$599,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Track Loaders JCB Midi-CX, s/n 71330945, canopy model w/skid steer coupler, front hydraulics, detached backhoe 10’ dig, 4WD, hydrostatic trans., PTO & 3 pt hitch.

Mint condition. Pictures available, 12 hours ..........$38,500.

Farm-Rite Inc. 908/625-0697 2006 Cat 953C, 1004 hours .. ................................$135,000 Cat 953C, 3577 hours ............ ................................$115,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

MISCELLANEOUS

USED TRAMAC HAMMER PARTS

Service

Quality used Tramac Parts f or 140, 625, BRV32, or 501 hammers

LINE BORING ON-SITE! Construction Equipment Industrial & Heavy Truck Eastern PA and surrounding states.

DOYLESTOWN SERVICES Dave Wallace 215-470-0870 250 Hour Service Specials on Skid Loaders & Telescopic Material Handlers Now in PA & NJ!!!

Call for Details Norris Sales Company 610/279-5777 We Service What We Sell!

Warranty, Maintenance and More!

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors Norris Sales Company 610/279-5777

MOTOR GRADERS Graders Galion 503, s/n 503A-HG05191, older but runs well, 10’ board, rake..................$8,500.

Central Equipment Company 207-827-6193

PARTS Crane Parts TEREX PARTS Modern Equipment Sales & Rental 800/445-4381

Miscellaneous Parts Manitowoc - Grove National Crane - Terex P&H - Lorain Koehring - JCB Doosan - Case Atlas Copco - Genesis Leeboy Hoffman Equipment 1-800-4-HOFFMAN Piscatawy, NJ Williamstown, NJ Medord, NY Bronx, NYC Marlboro, NY

Plasterer Equipment Co. Inc. 800/225-4001 or e-mail lebanon@plasterer.com JOHN DEERE USED PARTS All Makes In Stock!

Nationwide Availability 1-800-344-3205 Industrial Tractor Co., Inc. Jacksonville, FL VISA/MC

RENTALS Rental DAILY-WEEKLY-MONTHLY Long Term Rentals: Loader Backhoes, Wheel Loaders, Crawler Dozers, Excavators, Mini Excavators, Compact Wheel Loaders, Articulated Trucks, Skid Steer Loaders, Trenchers, Cable Plows, Rollers, Hydraulic Hammers, Landscape Attachments & More Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054 Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381 Hydraulic Excavators, Wheel Loaders, Crawler Loaders, Crawler Dozers, Compaction Equipment, Hammers, Motor Graders, Screens & Conveyors, Articulated Haulers, Backhoe Loaders, Elevating Scrapers, Loadalls.

Midlantic Machinery Co. Hatfield PA 215/822-0145 Harrisburg PA 717/652-3190 Wilkes-Barre PA 717/824-9891 Baltimore MD 410/247-2100 Delmar DE 302/846-0224

Construction & Equpment & Supplies for the “Professionals” Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few .....

Norris Sales Company 610/279-5777 Construction & Industrial Equipment Rentals

TRAILERS Low Bed Trailers RENT LOW BEDS 35 & 50 ton Rogers Weekly & Monthly Stephenson Equipment/ Keesler Division 610/534-0700 Located @ I-95 & RT420 Exit 9-B Propsect Park, PA

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

Miscellaneous Trailers

Norris Sales Company 610/279-5777

Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

ROAD MAINTENANCE Sweepers Johnston-Allianz M7 350 High Side Dump Chassis Mount Sweeper!

Call for Demonstration U.S. Municipal Supply, Inc. 800/733-3776 2002 Rosco SweepPro, 8’ w/ poly brush, 85hp Cummins, new condition ............$29,995 U.S. Municipal Supply, Inc. 800/733-3776 1995 Tymco 210, runs well, 32’’ gutter broom, excellent dust control, 98’’ sweep width, good condition, 4600 hours ............ ..................................$19,500.

Central Equipment Company 207-827-6193 NEW Johnston-Allianz MST New High Dump Chassis Mount Sweeper!

NEW & USED TRAILERS

FULL LINE GENERAL Eager Beaver Trailers in stock Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

TRAINING Operator Training NCCCO Crane Operator Training Tower, Rigger and Signal Person.

Trained at our location in PA or NJ or your location.

All trainers NCCCO Certified

U.S. Municipal Supply, Inc. 800/733-3776

Call 215-639-2579 Atlantic Crane Inpection Services Visit us at www.atlanticcrane.com

NEW Rosco RB-48, Enclosed cab. New Units for Sale or Rent.

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Mon-Fri 6:30 am - 5:00 pm Sat 7:00 am - 12:30 pm

U.S. Municipal Supply, Inc. 800/733-3776

Norris Sales Company 610/279-5777

SCRAPERS

www.norrissales.com

Motor Scrapers

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders

Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer Rentals, Sales, Service

Daily - Weekly - Monthly Competitive Rates Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777

1998 Cat 627F, 9,740 hours .. ................................$299,000 1998 Cat 627F, 10,307 hours ................................$299,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

CRANE OPERATIONS TRAINING NCCCO Certification Crane Operator Rigger Signal Person Stephenson Equipment provides training at our locations in Harrisburg, PA and McDonald, PA or we will provide training at your PA company.

Visit www.stephensonequipment.com Click on NCCCO Training or call 1-800-325-6455 x1154

Safety Training Mask Fitting, First Aid & CPR, Forklift Safety, Fall Protection, Confined Space ..........$95.00 Call Dave Norris Sales Company 610/279-5777 OSHA Approved Safety Seminars Fall Protection, Confined Space, Trenching & Shoring, First Aid/CPR, Backhoe Safety, Industrial Forklift $95 Each Call for a schedule Norris Sales Company 610/279-5777

TRENCHER Trenchers NEW & USED TRENCHERS Eagle Power & Equipment Montgomeryville PA 215/699-5871 New Castle DE 302/652-3028 Eagle PA 610/458-7054

TRUCKS Bucket Trucks ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

Misc Trucks 2004 Cat 735, 4,035 hours .... ................................$249,000 2005 Cat 735, 3,738 hours .... ................................$269,000 2006 Cat 740, 3,320 hours .... ................................$305,000 1994 Cat D350D, 20,412 hours ..........................$49,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Page 110 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Subscribe to CEG today...

Get an edge on your competition!

WANT TO CHANGE YOUR ADDRESS?

Construction Equipment Guide Northeast Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people.

Call Toll Free! We now accept Visa, Mastercard & American Express!

One Year $65

SUBSCRIPTIONS: (within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________ STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________ TYPE OF BUSINESS _____________________________________________________________ WANT INFORMATION ABOUT GOVERNMENT JOBS?

Check Enclosed

VISA

MASTERCARD

American Express

CARD NUMBER

Want to know where to get this information?

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

All kinds of government information are just a click or call away.

1 (800) FED-INFO

®

TOLL FREE

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

Classified...2 Insertions...95¢ Per Word

Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

In

Each

Block

CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction Equipment Guide.

CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________ STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________ Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS

CARD NUMBER

EXP. DATE

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910

470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

St. Mary’s • Harford • Garrett • Prince Georges • Frederick • Maryland...

Wicomico • Howard • Halethorpe • Montgomery • Anne Arundel • Baltimore • Queen Annes • Charles • Worcester • Caroline • Kent • Clear Spring • Washington • Talbot • Dorchester • Oxon Hill • District Heights • Allegany St. Mary’s • Harford • Garrett • Prince Georges • Frederick • Wicomico • Howard • Halethorpe • Montgomery • Anne Arundel • Baltimore • Queen Annes • Charles • Worcester • Caroline

‘Old Line State’ Highway Project Bids

Listed below are some bids on projects for the Maryland Department of Transportation (MDOT).

Counties/Districts: Dorchester, Somerset, Wicomico and Worcester Contract No.: XY2275177 Project: Miscellaneous concrete work for ADA compliance at various locations.

Contractors and Bid Amount: • Metro Paving Corporation — $1,042,755 • Image Asphalt Maintenance Inc. — $1,057,846 • J & P Excavating Co. Inc. — $1,123,800 • JJid Inc. — $1,283,507 County/District: Talbot Contract No.: XX1205377 Project: Mill/grind, patch and resurface roadway pavements at various locations.

Contractors and Bid Amount: • George Lynch Inc. — $2,199,633 • David A. Bramble Inc. — $2,334,625 Counties/Districts: Carroll, Frederick, Howard and Montgomery Contract No.: SBTNORTHFY12 Project: Salt brine transport at various locations.

Contractors and Bid Amount: • Bennett Enterprises LLC — $75,654 • Rands Transport Inc. — $96,180 • Harland Shoemaker & Sons Inc. — $97,086 Counties/Districts: Caroline, Cecil, Dorchester, Harford, Kent, Somerset, Talbot, Queen Anne’s, Wicomico and Worcester Contract No.: SBTEASTFY12 Project: Salt brine transport at various locations.

Contractors and Bid Amount: • Bennett Enterprises LLC — $46,824 • David A. Bramble Inc. — $61,860 • Rands Transport Inc. — $69,198 County/District: Dorchester Contract No.: D03786114SBR Project: Landscape maintenance at various locations.

Contractors and Bid Amount: • United Landscaping Inc. — $116,369 • Nicholas Lawn and Landscape Inc. — $129,345 • Lorenz Lawn and Landscape — $137,161 • Tote It Inc. — $192,288 • Chesapeake Turf LLC — $306,589 Counties/Districts: Anne Arundel, Calvert, Charles and St. Mary’s Contract No.: 479D51412SB Project: Installation of thermoplastic pavement markings at various locations.

Contractors and Bid Amount: • Priceless Industries Inc. — $493,150 • Proline Painting Co. — $515,500 • Midlantic Marking Inc. — $590,600 • Image Asphalt Maintenance Inc. — $618,000 • AAnnandale Inc. — $697,000 County/District: Prince George’s Contract No.: 46116M14A12 Project: Snow removal operations: I 95 (NB & SB) from US 50 to MD MD 414 for Marlboro Shop.

Contractors and Bid Amount: • DRC Emergency Services LLC — $821,420 County/District: Southern Anne Arundel Contract No.: 4262A51412 Project: Application of herbicide solutions along roadways at various locations.

Contractors and Bid Amount: • Advantage Lawns LLC — $170,000 • K.D. Faulkner Landscape LLC — $174,920 • H. F. Huber & Sons Inc. — $215,760 • Angel Systems — $337,400 Counties/Districts: Carroll, Frederick and Howard Contract No.: XY2275777 Project: Installation and/or repair of concrete sidewalks, curb, gutter and pedestrian ramps at various locations.

Contractors and Bid Amount: • J & P Excavating Co. Inc. — $1,217,570 • Image Asphalt Maintenance Inc. — $1,442,259

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 111

Attention Contractors!

Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.

TRENCHER • VERMEER T600D COBBLESTONES – LARGE QUANTITIES CAT D4 HI TRACK WITH BLADE | 2 CAT D5K DOZERS | TWO C/A LGP MACHINES WITH 1500 HRS OR LESS. OF CLEAR, USED COBBLESTONES; Contact: JIM WESTERCAMP MODEL WANTED LATE 90’s or EARLY PREFER CONTRACTOR OWNED. WHOLESALE BUYER. Email: jkw@mahaska.org 2000’s, LOW HOURS, AUTO TRAN., PREFER EAST COAST. UNITED STATES. –––––––––––––––––––––––––––––––– Phone: 631-339-1648 EXCELLENT CONDITION. Contact: JASON SPENCE –––––––––––––––––––––––––––––––– WHEEL LOADERS • LOOKING FOR CAT Contact: JIM Phone: 16017500201 KOMATSU D65PX | AIR CAB 5000-6000 920,930,950,966-C WHOLESALE PRICES Phone: 1-330-669-3545 Email: jspence@heavyequipmentms.com HOURS CLEAN WORK READY PLEASE...IF YOU WANT TO SELL YOUR Email: peapod@sssnet.com –––––––––––––––––––––––––––––––– Contact: RICHARD MACHINE NOW CALL DALE...

–––––––––––––––––––––––––––––––– CRAWLER DOZER | CRAWLER DOZER Phone: 603 828-6100 Contact: DALE SCREENING PLANT | SCREENING Email: cmisold@comcast.net Phone: 360-551-9778 PLANT TRACK MOUNTED AGGREGATE WITH RIPPERS IN NORTHERN CALF. SIZE D6 AND SMALLER –––––––––––––––––––––––––––––––– Fax: 360-895-7897 SCREENING PLANT. DESIGNED TO Contact: BILL BOITANO CATERPILLAR D7R WITH RIPPER | CAT SCREEN ROCK, SOILS, SAND AND Email: Phone: (209} 267-5603 D7R WITH RIPPER 70+ U/C 6,000 dale.heavyequipmenthunters@gmail.com GRAVEL AND C&D MATERIALS, PROFax: (209) 267 1523 HOURS OR LESS. EROPS. –––––––––––––––––––––––––––––––– DUCING THREE DIFFERENT SIZES. Email: wmjb3@att.net Contact: RANDALL REECE BACKHOE • NEED 2 JD 310SE WHOLESALE, PREFERABLY IN THE –––––––––––––––––––––––––––––––– Phone: 770-966-9056 SOUTHEAST. CATERPILLAR WHEEL LOADERS 950B, BACKHOES. 4X4 EXT. HOES 1 OROPS 1 Fax: 770-966-9035 CLOSED CAB. MAX PRICE 23,000. NOT Contact: MICK 950E, 966D, 966F | PLEASE DO NOT Email: INTERESTED IN ANYTHING ELSE!!!

Phone: 352-527-0072 HESITATE TO CONTACT US & KINDLY randy@globalequipmentexporters.com Contact: SAM COCHRAN Email: info@fieldco.biz SEND US DETAILS,PHOTOS & YOUR –––––––––––––––––––––––––––––––– Phone: 704-960-9523 –––––––––––––––––––––––––––––––– BEST PRICE. BOBCAT 463 OR 553 | LOOKING FOR Email: samcochran_cochran8@msn.com HYUNDAI | 2HYUNDAI HL760-7A OR 2Contact: NAQIB KHAN UNITS WITH UNDER 1,000 HOURS AND –––––––––––––––––––––––––––––––– HL770-7A, GOOD TIRES, WORK READY Phone: +92-333-3298751 FULL ENLOSURES WITH HEAT. BRING BW900 VIBRATOR ROLLER • NEW Email: naqib_khan73@yahoo.com --WHOLESALE, PREFERABLY IN THE ALL OFFERS ON THIS SIZE MACHINE. Contact: CARL –––––––––––––––––––––––––––––––– SOUTHEAST. PREFER 2003 AND NEWER Phone: 636-399-0408 BACKHOE NO CAB | KOMATSU 4X4 Contact: MICK Contact: WILLIE Email: carlburns_pvg@sbcglobal.net DW140 Phone: 352-527-0072 Phone: 201-786-3354 –––––––––––––––––––––––––––––––– Contact: DARREN BALLARD Email: info@fieldco.biz Fax: 201-444-6377 D8K TRACKS NEW OR OVER 60%, Phone: 903-669-7070 –––––––––––––––––––––––––––––––– Email: williekirch@gmail.com Email: dwballard63@gmail.com ADJUSTERS, AND BOTTOM ROLLERS 16H, 16G MOTOR GRADER | WANT TO –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– Contact: RUSS LOOKING FOR EXVAVATORS | LOOKING BUY CATERPILLAR 16H OR 16G MOTOR EARLY CAT 12H MOTORGRADER • WE Phone: 989-245-7966 GRADER FOR RESALE FOR KOMATSU, HITACHI, CAT EXCAVAARE LOOKING FOR ONE MAYBE TWO Fax: 989-695-2036 Contact: TONY THOMAS TORS. 120--200 SIZE. WE RECYCLE CAT 12H MOTORGRADERS THAT ARE Email: eggex@yahoo.com Phone: 818-956-5231 MACHINES ANY CONDITION. 1996 THROUGH 1999 YEAR MODELS. –––––––––––––––––––––––––––––––– Contact: DALE Fax: 818-956-5239 THEY MUST BE GOOD MACHINES WITH CAT EQUIPMENT: US CONTRACTOR Phone: 360-551-9778 Email: tonythomas@pacificcranes.com ORIGINAL PAINT, EROPS CAB, PREFER- OWNED | I AM LOOKING FOR SEVERAL Fax: 360-895-7897 –––––––––––––––––––––––––––––––– ABLY EQUIPPED WITH A SCARIFIER OR MACHINES RIGHT NOW. THEY MUST BE Email: BOBCAT T190 GOLD PK REAR RIPPER AND ABSOLUTELY NO CONTRACTOR OWNED AND NOT dale.heavyequipmenthunters@gmail.com Contact: KEVIN BREAKS, PATCHES OR WELDS. ADVERTISED ANYWHERE. LOOKING –––––––––––––––––––––––––––––––– Email: kevjfel@yahoo.com Contact: WENDELL CAIN FOR CAT 12H, 140H/M, 14H/M, 16G,H,M CRASH TRUCK WITH ENERGY –––––––––––––––––––––––––––––––– Phone: 770-381-8984 CAT ROLLERS CS563E, CP563ES ABSORTION SYS WITH ARROW BOARD NEED 644H | NEED IMMEDIATELY JOHN Fax: 770-381-6977 LOADERS: CAT 950G/H, 966G/H, Contact: MIKE DEAN Email: wendell@cainandtodd.com DEERE 644H 2000 TO 2002 MODEL 972G/H, 980G/H DOZERS: CAT D8TS Phone: 954-792-8287 –––––––––––––––––––––––––––––––– EROPS A/C, LESS THAN 8,000 HRS, WOULD A/C CABS EXCAVATORS: Fax: 954-792-8374 NEED TO BUY BULLDOZER BULL TD5 TIRES 85+ WITH BUCKET, FORKS A +, PC200LC-6,7, 8, PC300LC-7,8 Email: rockinevac@hotmail.com NEEDS TO BE CLOSE TO GA, PRICE NO FROM USER –––––––––––––––––––––––––––––––– Contact: RESOURCE EQUIPMENT Contact: JEAN MAURICE BOUTIN MORE THAN $40,000. OTHER NEED TO BUY D6D WITH BUDGET Phone: 1-601-750-0201 Phone: 1 450 346 8975 MACHINES EQUIVALENT TO THE 644 UNDER 1,700,000 US I NEED 4 FROM Email: jeanmauriceboutin@bulldozerjm.com Email: sales@resourceequipment.net WILL ALSO WORK. USER –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– Contact: RANDALL REECE Contact: JEAN MAURICE BOUTIN Phone: 770-966-9056 Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com Fax: 770-966-9035 Email: –––––––––––––––––––––––––––––––– randy@globalequipmentexporters.com NEED SERVICE MANUAL FOR A –––––––––––––––––––––––––––––––– HITACHI EX1202 CONCRETE PUMP | WE ARE LOOKING Contact: AARON HAYES FOR USED CONCRETE PUMPS IN Phone: 503-572-4169 SCHWING BRAND FOR DUBAI. Email: buyingoem@gmail.com STATIONARY AND TRUCK MOUNTED –––––––––––––––––––––––––––––––– Contact: BABAK HITACHI EX/ ZX EXCAVATOR | EAST Email: info@jinamachine.com COAST. LESS THAN 6000 HRS CLEAN –––––––––––––––––––––––––––––––– WORK READY KOMATSU CRUSHERS | LOOKING FOR Phone: 603 828-6100 TWO BR550 OR BR580 CRUSHERS. Email: cmisold@comcast.net PREFER CONTRACTOR OWNED. –––––––––––––––––––––––––––––––– LOOKING FOR LOW HR MACHINES NEED BULLDOZER KOMATSU 375A 2 READY TO WORK. MACHINES WILL BE 375A 3 375A 5 ENC RIPPER USER FOR EXPORTSTATES NO HACKER 856/429-9149 856/429-9149 Contact: JASON SPENCE Contact: JEAN MAURICE BOUTIN Phone: 16017500201 Phone: 1 450 346 8975 Fax# 856/429-4267 • Cell# 609/457-2104 Email: jeanmauriceboutin@bulldozerjm.com Email: jspence@heavyequipmentms.com –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

To Consign Equipment to Alex Lyon’s Atlantic City Auction December 18, 2010

www.ecommercics.com/stuharris/

SOMERO POWER RAKE | LOW HOUR LOW BOY TRAILER 35 TON • 35 TON DETACHABLE GOOSE NECK TRAILER POWER RAKE 2.0 WITH PONY MOTOR Contact: TOM NACEY Contact: ERIC CASEY Phone: 651-214-1694 Phone: 614-469-8338 Email: nstarassets@gmail.com Fax: 614-469-0139 –––––––––––––––––––––––––––––––– Email: ericc@imi-smc.com TURBO FOR SK450 LC 1995 –––––––––––––––––––––––––––––––– Contact: BOB COSMOS HITACHI, KOMATSU, CAT 180210 SIZE Phone: 321-228-3766 WHEEL EXCAVATOR • CLEAN WK Email: bobcosmos@peceofmind.com READY MAX 4000 HOURS –––––––––––––––––––––––––––––––– Contact: RICHARD ZX 200 Phone: 603 828-6100 Contact: HAKIM Email: cmisold@comcast.net Phone: 971 48818035 –––––––––––––––––––––––––––––––– Fax: 97148817638 EAGLE 1200CC CRUSHING PLANT • Email: dakhanfz@eim.ae EAGLE 1200CC OR 1000CC CRUSHING –––––––––––––––––––––––––––––––– PLANT INDIVIDUAL OR TAKE OVER COSTRUCTION / MATERIAL HANDLING | PAYMENTS LOOKING FOR LOADERS, EXCAVAContact: JOE TORS, DOZERS, ROLLERS, FORKLIFTS, Phone: 724-944-5569 AND FORESTRY EQUIPMENT. Email: fjs-1@att.net Contact: PAUL MADSEN –––––––––––––––––––––––––––––––– Phone: 407-468-1070 36' CLEAN OUT BUCKET 75UU2 Fax: 407-850-3914 Contact: R. D. LYNCH Email: cflresale@gmail.com Phone: 214 342 1794 –––––––––––––––––––––––––––––––– Fax: 214 342 0992 LOWBOY Email: rdl10550@aol.com Contact: STEVE ALLEN –––––––––––––––––––––––––––––––– Phone: 915-222-6894 SNOW BLOWER LX885 NEW HOLLAND Fax: 972-451-4523 Contact: ART HOOVER Email: spartannmllc@aol.com Phone: 814-382-8184 –––––––––––––––––––––––––––––––– Fax: 814-382-5707 KUBOTA LA463 LOADER | NEED A Email: ahoover@camelotconsolidated.com COMPLETE LOADER FOR A 3400 KUB–––––––––––––––––––––––––––––––– OTA LA-463 NEED TO BUY 2 D8L OPEN ROPS OR Contact: ARNOLD KLEIN CAB WITH RIPPER GOOD UNIT USER Phone: 217-456-8711 ONLY Email: kaj4243@frontier.com Contact: JEAN MAURICE BOUTIN –––––––––––––––––––––––––––––––– Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com NEED TO BUY 3 D10T UNDER 300 HOURS –––––––––––––––––––––––––––––––– Contact: JEAN MAURICE BOUTIN KOMATSU WA3805 | MAX 5000 HOURS Phone: 1-450-346-8975 CLEAN WORK READY Email: jeanmauriceboutin@bulldozerjm.com Contact: RICHARD –––––––––––––––––––––––––––––––– Phone: 603 828-6100 JOHN DEERE 760 OR 760A Email: cmisold@comcast.net Contact: MIKE MILLER –––––––––––––––––––––––––––––––– Phone: 651-983-7978 USED CAT ENGINE Email: allie-cat10@msn.com Contact: JASON GREENE –––––––––––––––––––––––––––––––– Phone: 585-328-6849 OR 585-261-0804 HYUNDAI 7807A WHEEL LOADER | Email: jayru9804@yahoo.com MUST BE A HYUNDAI 780-7A WITH –––––––––––––––––––––––––––––––– LESS THAN 5000 HOURS. CEMENT/LIME POWDER SPREADER | Contact: BEAUFORD MULLINS SEMI TRAILER TYPE CEMENT/LIME Phone: 260 497 0500 SPREADER FOR ROAD WORKS Fax: 260 490 8217 APPROX 20 TONNE CAPACITY Email: beauford@kortebros.com Contact: TIM CAMPBELL –––––––––––––––––––––––––––––––– Phone: 0749823863 BOBCAT T190 WITH JOYSTICK Fax: SAME CONTROLS (SJC) WITH LOW HOURS Email: timjulie@bigpond.net.au Contact: RONALD PEREDO –––––––––––––––––––––––––––––––– Phone: (239) 334-4987 KAWASAKI WHEEL LOADER 80ZA Fax: (239) 334-7965 Contact: HAKIM Email: rperedo@wejohnson-fl.com Phone: 97148818035 –––––––––––––––––––––––––––––––– Fax: 97148817638 2 CRADLE 7082L06630 | HAVE TO BE Email: dakhanfz@eim.ae NEW OEM KOMATSU –––––––––––––––––––––––––––––––– Contact: ROBERTO J PALACIOS HAMM 3410 UNDER 1000 HOURS Phone: 786-287-7056 Contact: DAVID LIGHT Fax: 305-573-7038 Phone: 512-961-2431 Email: david@dclenterpriese.net Email: cargoawaycorp@live.com –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

Page 112 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Auctioneers Announces JCB Launches New Strong Third Quarter Net Earnings Skid Steers, CTLs in Savannah, Ga.

Ritchie Bros. Auctioneers Incorporated announced net earnings for the nine months ended Sept. 30, 2010, of $52.4 million, or $0.49 per diluted share, and adjusted net earnings of $51.6 million, or $0.49 per diluted share. This compares to financial statement net earnings for the first nine months of 2009 of $71.6 million, or $0.68 per diluted share, and adjusted net earnings of $71.0 million, or $0.67 per diluted share. Adjusted net earnings is a non-GAAP financial measure and is defined below.

In the first nine months of 2010, the company conducted 157 industrial auctions in 15 countries throughout North America, Europe, the Middle East, Central America, Asia and Australia.

Quarterly Dividend The company also announced the declaration of a quarterly cash dividend of $0.105 per common share payable on Dec. 10, 2010, to shareholders of record on Nov. 19, 2010.

Gross Auction Proceeds and Auction Revenues For the nine months ended Sept. 30, 2010, gross auction proceeds were $2.5 billion and auction revenues were $269.1 million compared to $2.6 billion and $280.1 million, respectively, in the first nine months of 2009. Gross auction proceeds is a non-GAAP financial measure and is described below. The company’s auction revenue rate (auction revenues as a percentage of gross auction proceeds) was 10.85 percent for the first nine months of 2010, compared to 10.77 percent for the first nine months of 2009, mainly due to the continuing strong performance of the company’s at risk business.

The company achieved gross auction proceeds of $750.9 million and auction revenues of $82.2 million for the third quarter of 2010, both representing 8 percent increases over the third quarter of 2009. The company’s auction revenue rate was 10.95 percent for both the third quarter of 2010 and 2009.

Net Earnings for the Quarter Net earnings and adjusted net earnings for the three months ended Sept. 30, 2010, were $13.5 million, or $0.13 per diluted share, compared to net earnings and adjusted net earnings for the three months ended Sept. 30, 2009, of $12.9 million, or $0.12 per diluted share.

Bidders, Buyers and Sellers The company had approximately 247,000 bidder registrations at its industrial auctions in the first nine months of 2010, of which more than 71,000 were successful buyers, roughly identical to the record numbers achieved in the same period in 2009.

In the first nine months of 2010, Ritchie Bros. sold more than 213,000 lots on behalf of approximately 31,000 consignors compared to close to 209,000 lots for more than 27,000 consignors in the first nine months of 2009.

Average Ritchie Bros. Auction Although the company’s auctions varied in size over the 12 months ended Sept. 30, 2010, the average Ritchie Bros. industrial auction attracted more than 1,500 bidder registra-

tions that competed for over 1,300 lots consigned by 189 consignors. For the 12 months ended Sept. 30, 2009, the average industrial auction attracted over 1,600 bidder registrations that competed for over 1,400 lots consigned by 185 consignors. The average gross auction proceeds per industrial auction for the 12 months ended Sept. 30, 2010, was $14.9 million (12 months ended Sept. 30, 2009 – $16.9 million).

Online Bidding Statistics Ritchie Bros. sold more than $620 million worth of equipment, trucks and other assets to online bidders during the first nine months of 2010, compared to over $600 million in the first nine months of 2009. The company currently has approved users of its online bidding system from over 150 countries.

Online bidders represented approximately 40 percent of the total registered bidders at Ritchie Bros. industrial auctions for the nine months ended Sept. 30, 2010, and they were the buyer or runner up bidder on 39 percent of the lots Larry Ashley conducts the outdoor presentation. offered online at these auctions (first nine months of 2009 – JCB from page 28 35 percent). Ritchie Bros. is the largest seller in the world of 300 different machines including: backhoe loaders; telescopused equipment and trucks to online buyers. ic handlers; tracked and wheeled excavators; wheel loaders; articulated dump trucks; rough terrain fork lifts; mini excaSummary Comments on Quarterly Results Peter Blake, the company’s CEO commented: “While our vators; skid steers loaders; JCB Vibromax compaction year to date performance lags behind our 2009 performance, equipment.

In addition, for agricultural markets, the company proour third quarter auction revenues represented the highest duces a range of telescopic handlers and the unique Fastrac third quarter results in our history and reflected solid gross Tractor.

JCB also manufactures the Teletruk forklift for the auction proceeds growth and a strong auction revenue rate. industrial sector.

Although we are very pleased with our performance in the In 2005, JCB secured one of the largest orders in its histothird quarter of this year, we are still seeing considerable uncertainty in our major marketplaces and we believe the ry when it won a $290 million deal to supply the U.S. used equipment market has not yet returned to a balanced Government with high mobility engineer excavators state. As a result, we continue to believe that we will face (HMEEs). Full-scale production of the HMEE is now under challenging market conditions for the remainder of 2010, way at JCB’s plant in Savannah, Ga. The HMEE fulfills a need from the military for rapid particularly in the U.S.” deployment high mobility products. To further meet these requirements; JCB also has developed a range of other high Strategic Initiatives Ritchie Bros. recently completed an update of its strategic mobility products from the high mobility Fastrac tractor, plan and has identified a number of initiatives that the com- through to the high mobility rough terrain forklift and the high mobility utility vehicle. pany intends to introduce starting in 2011. These initiatives are designed to propel the company’s business forward by delivering enriched services to help its customers easily and confidently exchange equipment. The Company believes the initiatives will accelerate its market share growth and help Ritchie Bros. achieve strong earnings growth in the years ahead.

One of the most significant initiatives that the company intends to launch in 2011 is a bundle of value-added buyer services that it expects will help Ritchie Bros. customers feel more confident and make their experience at its auctions as compelling and easy as possible. The bundle of services is being developed in response to customer feedback and will include a customer finance program and enhanced equipment information. The introduction of these and other new services and features will further ongoing efforts to extend the appeal of the company’s auctions and enhance the com- In addition to the new skid steer and track loader pany’s ability to attract new and existing customers to its machines being exclusively built in the Savannah, Ga., plant, the military HMEE (High Mobility Engineer auctions.

Excavator) still continues to be built in the plant as see RITCHIE page 113

well.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 113

Ritchie Announces New Customer Initiatives for 2011

PLAN AHEAD

ALEX LYON & SON SALES MANAGERS & AUCTIONEERS, INC. Bridgeport, New York

24

RITCHIE from page 112

Ritchie Bros. also intends to revise and simplify its fee structure effective July 1, 2011. The company will eliminate certain fees and expand the scope of its administrative fee charged to buyers to address the cost of providing the new and significantly enhanced buyer services to be offered at the company’s auctions, as well as other high value buyerfocused initiatives launched in recent years.

The company anticipates an increase in both revenues and expenses in 2011 and future years as a result of these initiatives, with an expected positive net benefit to earnings.

“We have invested heavily over the last number of years to provide the highest possible level of service for our customers, and we believe the changes we will make starting in 2011 will further broaden the appeal and enhance the convenience and ease of our auctions. The changes to our fee structure that will take effect in 2011 will allow us to continue to deliver a high level of service to our customers, maintain our track record of innovation and grow our business,” Blake said.

Definitions The company defines adjusted net earnings as financial statement net earnings excluding the after-tax effects of excess property sales and significant foreign exchange gains or losses resulting from financing activities that are not expected to recur, and has provided a reconciliation below.

Adjusted net earnings is a non-GAAP financial measure that does not have a standardized meaning, and is therefore unlikely to be comparable to similar measures presented by other companies.

The Company believes that comparing adjusted net earnings as defined above for different financial periods provides more useful information about the growth or decline of its net earnings for the relevant financial period and identifies the impact of items which the company does not consider to be part of its normal operating results.

Gross auction proceeds represent the total proceeds from all items sold at Ritchie Bros. auctions. The company’s definition of gross auction proceeds may differ from those used by other participants in its industry. Gross auction proceeds is an important measure the company uses in comparing and assessing its operating performance. It is not a measure of the company’s financial performance, liquidity or revenue and is not presented in its consolidated financial statements.

The company believes that auction revenues, which is the most directly comparable measure in its statements of operations, and certain other line items, are best understood by considering their relationship to gross auction proceeds.

Auction revenues represent the revenues earned by Ritchie Bros. in the course of conducting its auctions, and consist primarily of commissions earned on consigned equipment and net profit on the sale of equipment purchased by the company and sold in the same manner as consigned equipment.

For more information, visit www.rbauction.com.

IMPORTANT AUCTIONS

2010

www.lyonauction.com

Auction Calendar Bid Online

Visit www.lyonauction.com for details!

1.

Tuesday, November 30: DALLAS (FT. WORTH), 10.

Saturday, December 18: ATLANTIC CITY, TEXAS: Construction, Support Equipment, Trucks, NEW JERSEY: Rentals - Rentals - Rentals!

Trailers, Attachments & More!

Construction, Support Equipment, Attachments, Aerials, Truck Tractors, Dump Trucks, Trailers.

2.

Friday, December 3: LEXINGTON, KENTUCKY: Secure Creditors Auction of Late Model Cat, Komatsu Construction Equipment, Support Attachments, Trucks & Trailers.

3.

Saturday, December 4: COLUMBUS (DELAWARE), OHIO: Truck Tractors, Van Trailers, Construction, Support Equipment.

4.

11.

Wednesday, December 29: GREENWICH, NEW YORK: Rental Returns of Construction, Support Equipment, Attachments, Tools, Trucks, Equipment & Dump Trailers.

12.

Saturday, January 15: COLUMBUS, OHIO: Construction, Support Equipment, Attachments, Trucks & Trailers.

Sunday, December 5: COLUMBUS (DELAWARE), OHIO: Contractors Tools & Support 13-21.

Saturday, January 30 - Monday, February, Equipment. Over 1,000 Lots Like New From One Rental 7: ***9 DAYS OF SELLING!!*** ORLANDO Company.

(KISSIMMEE), FLORIDA: 18th Annual Rental Returns of Construction Equipment, Aerial, Forklift, 5.

Thursday, December 9: PINE BLUFF, Dump Trucks, Truck Tractors, Trailers, Support & ARKANSAS: Late Model Truck Tractors, Reefer Attachment.

Trailers, Support Equipment.

6.

Friday, December 10: RACINE, WISCONSIN: 22.

DTBA: ALLENTOWN, PENNSYLVANIA: Large Job Completion Auction. Late Model Cat Estate Auction: Complete Liquidation of Automotive Construction, Support Equipment, Late Model up to Dismantling Operation. MAC Car Crusher, Rubber 2008: Kenworth Quad axle Dump Truck & Late Model Tired Loaders, Rollback & Dump Trucks, Vans, Truck Tractors.

Over 100 Cars (40-50 Running), UNBELIEVABLE 7.

Saturday, December 11: TUSCALOOSA, Accumulation of Motors, Transmissions, Shocks, ALABAMA: Complete Liquidation of Late Model Glass & Much More.

Logging, Construction, Support Equipment, Attachments, 23.

DTBA: ROCHESTER, NEW YORK: Late Trucks, Trailers.

Model Dump Trucks, Truck Tractors, Equipment 8.

Wednesday, December 15: KISSIMMEE, Trailers, Construction Equipment, Aerials & Forklifts.

FLORIDA: Rental Returns Construction, Support, Attachments, Trucks & Trailers.

24. DTBA: LEDYARD, CONNECTICUT (FOXWOOD 9.

Thursday, December 16: SAGINAW, MICHIGAN: Large Truck Tractors, Dump Trailers, Support Equipment, (Quantity of Michigan Specials!)

CASINO): Earthmoving Construction Equipment, Aerial Lifts, Forklifts, Support, Dump Trucks, Truck Tractors, Equipment & Dump Trailers.

LYON MEXICO: Now with FOUR permanent sale sites: MONTERREY, TOLUCA, AGUASCALIENTES & GUADALAJARA! Visit http://www.lyonmexico.com/ for more information.

The Complete Auction And Appraisal Service

ALEX LY N & SON SALES MANAGERS & AUCTIONEERS, INC. Bridgeport, NY 315/633-2944, Fax: 315/633-8010 Syracuse, NY (Evenings) 315/637-8912 www.lyonauction.com 18 BRANCH OFFICES:

AKRON, OH (330) 753-3932 • ALBANY, NY (518) 732-2669 • MANASSAS, VA (703) 626-2123 • ATLANTA, GA (770) 537-7386 • BALTIMORE, MD (410) 792-0008 • BRATTLEBORO, VT (802) 722-4727 • CHERRY HILL, NJ (856) 429-9149 • DETROIT, MI (248) 388-0918 • HARRISBURG, PA (717) 273-3737 • LAKELAND, FL (863) 660-0848 • MEMPHIS/NASHVILLE, TN (731) 660-4611 • MOBILE, AL (251) 510-1538 • NEW LONDON, CT (860) 535-8442 • RACINE, WI (262) 886-2778 • TAMPA, FL (813) 777-3273 • WASHINGTON, D.C. (310) 277-9875 • WORCESTER, MA (508) 845-2800

Page 114 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GIGANTIC AUCTION Thurs. Dec. 2nd 8:00AM, Montgomery, AL

Selling Equipment from Numerous Alabama, Florida and Mississippi Counties at Absolute Auction!

(6) 2007 CAT 140H MOTOR GRADERS (COUNTY OWNED) (1 of 2) 2007-2006 CAT 320CL

(2) 2007 DEERE 770D W/RIPPERS (COUNTY OWNED)

CAT 966G

(1 OF 5) CAT 420E 4X4 (COUNTY OWNED)

2006 MORBARK 1300

(1 OF 2) CAT 330CL

DEERE 744J

(1 OF 2) CAT 966D

3475 Ashley Road • Montgomery, AL 36108

Phone: 1-800-447-7085 • Fax: 334-269-6990 GO TO: www.jmwood.com FOR COMPLETE LISTING AND COLOR PICTURES Bryant Wood Wood Alabama License #1137

B C usiness

alendar

*St. Louis Blues Club Seats Available!

It’s time to catch Blues action! Single games sales are available for this year’s St. Louis Blues Hockey games. The AGC of St. Louis purchased 10 premium games (4 tickets per game) for the 2010-2011 Blues season. Seats are located behind the goal and in the middle section. This perfect view of the ice is ideal for watching plays unfold. If you are interested in purchasing a game(s), please contact Donna Pigg at 314-781-2356, ext. 108 or by email at dpigg@agcstl.org.

Mining New Members. Everyone knows word-of-mouth advertising from satisfied customers brings more business to your company. As an IAAP member, you have experienced valuable benefits from membership in this Association and along the way maybe you have talked with others in the industry about joining the IAAP. Your efforts are now being rewarded through a new member recruitment program called “Mining New Members.” For more information, please contact IAAP Outreach Manager Shawn McKinney at (217) 241-1639 or shawn@hansoninfosys.com.

DONATION - HELP Support IAAP’s Political Activities – The IAAP Political Action Committee (PAC) was created in order to provide financial support for our allies in the Illinois General Assembly.

Whether from Chicago or Downstate Illinois, Democrat or Republican, these legislators all have one thing in common – they support bills that help the Illinois aggregates industry and oppose bills that hurt our interests. As the cost of political campaigns continues to rise, we want to ensure that legislators who support this industry can compete and continue to do good work. For that reason, supporting the IAAP PAC is critically important to the future of our industry, your company, and your Association’s political activities. Please consider sending a donation, payable to the IAAP, to: John Henriksen, Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois 62704.

INFORMATION - AGC of St. Louis Governmental Affairs Legislative Update: Legislative Alert – New Illinois Law Could have Significant Effect on Contractors. The AGC of St. Louis has become aware of a new Illinois law passed that could have a dramatic effect on our members who perform work in Illinois. On June 16, Illinois Governor Pat Quinn signed House Bill 6349 into law which enhances the Illinois Workers on Public Works Act. From: AGC of St. Louis Governmental Affairs (mail to: agccom@agcstl.org).

INFORMATION - The Transportation for Illinois Coalition (TFIC) has published and electronic version of it’s most recent white paper, an analysis of the 2009 capital program. To download a copy of this document, go to the TFIC website: http://www.tficillinois.org, click on publications and open the file entitled Capital Funding for Transportation. Questions? Please feel free to contact John Henriksen, Illinois Association of Aggregate Producers, 1115 South 2nd Street, Springfield, IL 62704. Office: (217) 241-1639. Cell: (217) 899-7389. Fax: (217) 241-1641.

AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to the success of the AGC. INFORMATION - MSHA Enforcement Alert from an IAAP Member. An IAAP company has posted a new MSHA citation on the MSHA Enforcement Alerts website at www.mshaenforcementalerts.com maintained in partnership by the IAAP and other Midwest Aggregate Associations. This citation concerned the company because the inspector believed miners were stepping over the motor, but just as in a lot of other cases, this practice was acceptable during previous inspections by this same inspector and also during a CAV that was completed on these screens just 2 1/2 years ago. This motor configuration is present on many screens by different manufacturers. To view further details on this citation you may log on to http://mshaenforcementalerts.com/citations.php?id=144.

December 2, 2010 – Expo. AGC St. Louis “Build St. Louis Expo.” Join us December 2nd!!!

Find everything you need for your next project from concept to completion at this year’s Build St. Louis Expo. For three hours there will be an industry-wide showcase of the newest and sustainable products, best building techniques and information by the specialty contractors, suppliers, and professional service providers. This year’s construction industry expo invites all of AGC of St. Louis members, owners, developers, realtors, architects, contractors, subcontractors, suppliers and professionals. All industry partners are invited to “build relationships.” Hosted in conjunction with these participating organizations: AIA St. Louis and St. Louis Council of Construction Consumers.

Contractors are encouraged to bring project managers, operation personnel, estimating and management staff. Exposition Hours: 5:00 to 8:00 PM. For Booth Information, contact Nancy Valentine at 314-781-2356 ext. 103 or email: avalentine@agcstl.org.

January 12-16, 2011 – Convention. Early Reservations Now Being Accepted for the Riviera Maya this January, 2011. Network with Decision Makers and Build Your Business! ASA Chicago wants you to join us for the Annual Convention in the Riviera Maya on January 12 to 16, 2011.

You’ll stay at the El Dorado Royale, an adults-only destination that provides the ultimate in service in the ultimate setting and is a Conde Nast Traveler Readers’ Top 100 Hotels in the World and a AAA Four Diamond Resort. Contact ASA Chicago, 2200 E. Devon Avenue, Suite 261, Des Plaines, IL 60018 at 847-827-8336 or email info@asachicago.org.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 115

COMPLETE EQUIPMENT LIQUIDATION AUCTION for WHITE OAK CORP. & ATLANTIC PIPE CORP. ONE OF CT’s MOST REVERED BRIDGE & ROAD CONSTRUCTION FIRMS

INVENTORY OF TRUCKS, TRAILERS, FLEET VEHICLES, WHEEL LOADERS, FORKLIFTS, HEAVY EQUIPMENT REPAIR EQUIPMENT & TOOLS

FRIDAY, DECEMBER 3, 9:30 AM • 7 WEST MAIN STREET, PLAINVILLE, CT 06062 PARTIAL LISTING: EXCAVATORS: Case 1085B, Mobile Excavator, Erops, 28” Bkt w/Teeth, 4 Hyd Stabilizers, Wrist-O-Twist- Ext Dip, 17.5-25 Tires, s/n 6293984; RUBBER TIRED LOADERS: 1987 Michigan L070V, Erops, 7’9” Q/C BOCE Bkt, 17.5-25 Tires, Hrs Read: 17,961, s/n 60124AH; 1972 Michigan 55C, Erops, 8’ Q/C BOCE Bkt, 17.5-25 Tires, Hrs Read: 971, s/n 433A166; Michigan L70 Loader, No Bkt, 17.5-25 Tires, Hrs Read: 24,532, s/n L0700V60121AH; RUBBER TIRED PUSHERS & HIGH CAPACITY FORKLIFTS: Michigan 380, Rubber Tired Pusher w/Forklift Mast, 40 Ton Cap, s/n 4RG185; Michigan 380, Rubber Tired Pusher w/Sgl Stage Forklift Mast, 40 Ton Cap, Erops, Rear Counter Weight, 8’ Forks, Detroit Dsl, 33.5-33 Tires, Hrs Read: 7344, s/n 3RG115; Michigan 380, Rubber Tired Pusher w/Sgl Stage Forklift Mast, 40 Ton Cap, Erops, Rear Counter Weight, 8’ Forks, Detroit Dsl, 33.533 Tires, s/n 3801114RG169; Michigan 280TRGM, Rubber Tired Pusher w/Forklift 2 Stage Mast, Erops, Detroit Dsl, 29.5-29 Tires, No Forks, s/n 7MG182; 1966 Michigan 280TGDM, Rubber Tired Pusher, Erops, 14’ Winged Blade, Detroit Dsl, Hrs Read: 5994, s/n 5M0138; Taylor THD250M, 25K Lb Cap Forklift, Erops, 7’ Forks, Dsl, Side Shift, 2 Stage Mast, 10.00-20 Tires, Hrs Read: 2823, s/n ST429238; Cat V180B, 18K Lb Cap Forklift, Erops, Dsl, 2 Stage Mast, 7’ Forks, 285/75R24.5 Tires, Hrs Read: 2005, s/n 68401063; 1973 Cat V160, 16K Lb Cap Forklift, Erops, Cat 3208, 6’ Forks, 2 Stage Mast, 10.00-20 Tires, Hrs Read: 591, s/n 16V227; 1972 Hyster H200ES, 20K Lb Cap Forklift, Erops, Dsl, 6’6” Forks, 11R22.5 Tires, Needs Work, s/n B7P6433S; 1971 Clark CHY250, 22K Lb Cp Forklift, Orops, Dsl, 2 Stage Mast, 8’ Forks, 11R22.5 Tires, Hrs Read: 3850, s/n HY1425D1932156; 1963 Clark CY160BD, 16K Lb Forklift, s/n 2608; Clark CY150BD, 15K Lb Cap Forklift, Orops, Dsl, 2 Stage Mast, 6’ Forks, 11R22.5 Tires, Hrs Read: 7687, s/n 92476; CRANES: 1973 Pettibone 70SC, 35 Ton RT Crane, 3 Sheave Block, 4 Sheave Tip, 3 Section Hyd Boom, 4 Hyd Stabilizers, 18.00-25 Tires, s/n 37-3ES-4482; Pettibone 70SC, 35 Ton RT Crane, Detroit Dsl, 4x4, 3 Sheave Block, 4 Sheave Tip, 3 Section Hyd Boom, 4 Hyd Stabilizers, 18.00-25 Tires, s/n 2711ES4431; 1975 Grove RT58, 14 Ton RT Crane, Orops, Detroit Dsl, 3 Sheave Block, 2 Sheave Tip, 3 Section Hyd Boom, 4 Hyd Stabilizers, 4x4x4, 14.00-24 Tires, Hrs Read: 4014, s/n 33818; TELESCOPIC BOOM LIFTS: 1988 Snorkelift A80RD, 80’ Reach, 500 Lb Cap, Rotating Basket, Extendable Axles, Dsl, Hrs Read: 1292, s/n 882800388; 1980 Grove MZ68, 60’ Reach, 500 Lb Cap, Rotating Basket, Dsl, Hrs Read: 5124, s/n 0806164; 1977 JLG 40F, 40’ Reach, 500 Lb Cap, Gas, Hrs Read: 3108, s/n 734237; Genie Z30/20, Artic, Electric, s/n 3085339; DRILL UNIT: Casa Grande RM21, Rotary Crane Attach, 3 Mtg Brackets, Detroit Dsl, s/n RM2107CC122, Misc Drill Heads & Bits Sold Separately; TRUCK TRACTORS: 1990 Mack R688ST, T/A, Mack E6, 300 HP, 9 Sp, Spring Susp, Alum Headache Rack, Air Slide 5th Wheel, Miles Read: 869,159, Vin #1M1N188Y6LW029970; 1990 Mack R688ST, T/A, Mack E6, 300 HP, 9 Sp, Wetline, Spring Susp, Alum Headache Rack, Air Slide 5th Wheel, Miles Read: 445,986, Vin #1M1N188Y5LW029975; 1990 Mack R688ST, T/A, Mack E6, 300 HP, 9 Sp, Wetline, Spring Susp, Alum Headache Rack, Air Slide 5th Wheel, Hrs Read: 991,099, Vin #1M1N188Y3LW029974; 1990 Mack R688ST, T/A, Mack E6, 300 HP, 9 Sp, Wetline, Spring Susp, Alum Headache Rack, Air Slide 5th Wheel, Hrs Read: 523,685, Vin #1M1N188Y0LW029978; 1985 Mack R686ST, T/A, Mack E6, 300 HP, Wetline, Spring Susp, Engine Brake, Air Slide 5th Wheel, Steel 1/2 Fenders, Miles Read: 23,360, Vin #1M2N179Y7FA095529; 1985 Mack MH633, T/A, Mack Dsl, 9 Sp, Wetline, Spring Susp, Engine Brake, Air Slide 5th Wheel, Steel 1/2 Fenders, Motor Needs Work, Miles Read: 221,215, Vin #1M2AR12Y0FM001553; 1984 Mack R686T, T/A, Mack E6, 275 HP, 6 Sp, Spring Susp, Alum Headache Rack, Air Slide 5th Wheel, Steel 1/2 Fenders, Miles Read: 238,848, Vin #1M1N184Y5EA088966; 1984 Mack R686T, T/A, Mack E6, 275 HP, 5 Sp, Alum Headache Rack, Air Slide 5th Wheel, Steel 1/2 Fenders, Miles Read: 71,640, Vin #1M1N184Y4EA092152; 1974 Mack DM686SX, T/A, Mack Dsl, 5 Sp Lo, Spring Susp, Engine Brake, Dbl Frame, Miles Read: 266,276, Vin #1178; Mack DM686SX, Vin #1182; 1971 Mack R685T, T/A, Mack Dsl, 5 Sp, Spring Susp, Steel Headache Rack, Air Slide 5th Wheel, Vin #R6855T20361; 1971 Mack R795S, Tri-Axle, Mack V8 Dsl, 5 Sp Lo, Wetline, Spring Susp, Winch, Hyd Adj 5th Wheel Plate, Steel 3/4 Fenders, Engine Brake, Miles Read: 99,274, Vin #1433; Mack B61T, S/A, Mack Dsl, 5+2, Hyd Adj 5th Wheel Plate, Miles Read: 103,591, Vin #B61T3017; 1989 White/Autocar ACL64B, Tri-Axle, Cummins 365 HP, 8LL, Wetline, 36” Sleeper, Spring Susp, Engine Brake, Alum Headache Rack, Air Slide 5th Wheel, Needs Work, Miles Read: 33,892, Vin #4VZSCBJF5KU504180; 1979 Int’l 1955, S/A, Int’l Dsl, Auto, Hyd Adj 5th Wheel Plate, Miles Read: 29,936, Vin #DA195JHA18986; 1971 Arrow Denver, S/A Yard Jockey, Cat 3208, Auto, Spring Susp, Hyd Adj 5th Wheel Plate, Hrs Read: 3311; TRI, T/A & S/A DUMPS: 1978 Mack U685T, S/A Dump, Mack Dsl, 5 Sp, Spring Susp, 9’ Steel Body w/24” Sides, 10’ Snow Plow, Miles Read: 189,237, Vin #U685T16018; ROLLOFF TRUCKS & CONTAINERS: 1971 Mack DM685SX, 40 CY T/A Rolloff, Mack Dsl, 5 Sp, Spring Susp, Dbl Frame, Miles Read: 96,721, Vin #DM685SX5853; (7) 21’ Rolloff Containers; FLATBED TRAILERS: 1988 Transcraft ELT42-68 42’-68’ T/A Stretch, Sliding Tandems, Spare Tire Carrier, Spring Susp, Vin #1TTF42203J1030410; 1987 Fontaine TTP34675, 46’x75’ Tri-Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C1H1541377; 1987 Fontaine TTP34675, 46’-75’ Tri-Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C1J1541370; 1986 Transcraft ETL 42-68, 42’-68’ T/A Stretch, Sliding Tandems, Spring Susp, Vin #1TTF42202H1028710; 1986 Transcraft ETL 4268, 42’-68’ T/A Stretch, Sliding Tandems, Spring Susp, Vin #1TTF42208G1027527; 1985 Transcraft ETL 45-74, 45’-74’ T/A Stretch, Sliding Tandems, Spring Susp, Vin #1TTF4520G1027183; 1969 Rogers F5040X, 40’-50’ T/A Stretch, Sliding Tandems, Spring Susp, Vin #F5040XR2566; 1967 Transco 40’-60’ T/A Stretch, Sliding Susp, Spring Susp, Vin #SFLT867665; Fontaine TTP34675, 46’x75’ Tri-Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C6J1541364; Fontaine TTP34675, 46’x75’ TriAxle Stretch, Sliding Susp, Spring & Air Susp, Vin #13N4464C8H1541375; Fontaine TTP34675, 46’x75’ Tri-Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C3J1541371; Fontaine TTP34675, 46’-75’ Quad Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C1J1541367; Fontaine TTP34675, 46’-75’ 4 Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464CXH1541376; FontaineTTP34675, 46’-75’ 4 Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C3J1541368; Fontaine TTP34675, 46’-75’ Tri-Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C1H1541380; Fontaine TTP34675, 46’-75’ Tri-Axle Stretch, Sliding Susp, Spring Susp, Vin #13N4464C3H1541378; T/A Stretch, 40’-60’, Sliding Tandem, Spring Susp; 1989 Fruehauf PB80F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04527KM012202; 1989 Fruehauf PB80F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04525KM012201; 1987 Fruehauf PB80F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04521HM059802; 1987 Fruehauf PB80F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04521HND59801; 1987 Fruehauf PB80F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04526HM050805; 1987 Fruehauf PB80F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04524HM050804; Fruehauf PB08F2545, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1H5P04520HM050802; 1973 Fruehauf PBF240, 40’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #FWR500308; 1973 Fruehauf PBF242, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #FW463312; 1968 Fruehauf PBF240, 40’ T/A Flatbed, Bulk Head, Spring Susp, Vin #FWH802604; 1968 Fruehauf PBF240, 40’ T/A Flatbed, Bulk Head, Spring Susp, Vin #FWH802605; 1958 Fruehauf T/A Flatbed, Vin #FW119157; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155894; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155871; 1986 Monon MF0H445S, 45’ TA Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1NNF04523GM103137; 1985 Monon MF0H445S, 45’ TA Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1NNF04525GM103138; 1985 Monon MF0H445S, 45’ TA Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1NNF04527GM103111; 1985 Monon

MF0H445S, 45’ TA Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1MMF0452GM103132; 1985 Monon MF0H445S, 45’ TA Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1NNF0452XGM103135; Monon MF0H445S, 45’TA Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1NNF04522GM103128; Monon MF01445S, 45’ TA Flatbed, Sliding Tandems, Spring Susp, Vin #1NNF0452XGM103166; 1982 Dorsey 42’ T/A Flatbed, Vin #155862; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155886; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Spring Susp, Vin #155868; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155872; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Vin #155862; 1982 Dorsey 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #156466; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155907; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155841; 1982 Dorsey 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #156452; 1982 Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155883; Dorsey DGTWI276P0, 42’ T/A Flatbed, Bulk Head, Spring Susp, Vin #155865; Dorsey DGTL80, 45’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #1DTP16WZZ0A161528; 1974 Gindy FF2S40, 40’ T/A Flatbed, Bulk Head, Sliding Tandems, Spring Susp, Vin #119975; 1971 Gindy 40’ T/A Flatbed, Spring Susp, Bulkhead, Spare Tire Carrier, Vin #VIN70742; 1972 Brown 43P1HH2, 43’ T/A Flatbed, Bulk Head, Spring Susp, Vin #M723391; 1969 Florig FC2A38, 38’ T/A Flatbed, Bulk Head, Spring Susp, Vin #TEC67010107; 1968 Arrow SPB2240, 40’ T/A Flatbed, Spring Susp, Vin #185588; 1960 Fruehauf PB2336, 34’ T/A Flatbed, Bulk Head, Spring Susp, Vin #FW127362; 34’ T/A Flatbed, Bulk Head, Spring Susp; 34’ T/A Flatbed, Bulk Head, Spring Susp; 1994 Homemade 60K Lb 26’ Tri-Axle Steerable Stinger Type Deck Over, Air Ride & Beam Susp. Vin #CT-36153; 1994 Homemade 60K Lb 21’ Tri-Axle Steerable Stinger Type Deck Over, Air Ride & Beam Susp, Vin #CT-36155; 1994 Homemade 60K Lb 26’ Tri-Axle Steerable Stinger Type Deck Over, Air Ride & Beam Susp, Vin #CT-36152; 1994 Homemade 60K Lb 21’ Tri-Axle Steerable Stinger Type Deck Over, Air Ride & Beam Susp, Vin #CT-36151; 1967 Fruehauf 26’ Tri-Axle Steerable Stinger Type Deck Over, Spring Susp, Vin #1542; (2) Homemade 20 Ton Tri-Axle Steerable Stinger Types, Vin #CT-34493, CT-33492; Transcraft 21’ Tri-Axle Steerable Stinger Type Deck Over, Spring Susp, Vin #TC2758; OTHER EQUIPMENT TRAILERS: 1981 Fruehauf 75K40, 40’x90K Lb Tri-Axle Folding Neck Lowbed Equipment Trailer w/Extendable Deck, Spring Susp, Vin #1H5P04032BN030102; 1984 Talbert TRW60, 60 Ton Tri-Axle Detachable Lowboy Drop Side Trailer, 9’x25’ Deck, Non Ground Bearing, Air Ride, Vin #6140; Talbert TD25RG, T/A Lowbed Beam Trailer, 8’x22’ Deck, Non Ground Bearing, Spring Susp, Vin #718; 1975 Hyster RF50-PL4, Quad Axle Lowbed Stretch Trailer, Fold Down Goose Neck, 8’x20’ Deck, 20’ Beam Ext, Vin #18987; 1972 Hyster RGH40T, Tri-Axle Detachable Lowboy Trailer, 8’x19’ Deck, Non Ground Bearing, 5th Wheel Plate, Air Ride, Vin #16318; 1972 Hyster RGH40T, T/A Detachable Lowbed Trailer, 8’x23’ Deck, Non Ground Bearing, Beam Susp, Vin #16317; 1982 Dorsey 42’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #155861; 1982 Dorsey DGTWI276P0, 42’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #155898; 1982 Dorsey TV105, 42’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #155870; 1982 Dorsey DGTWI276P0, 42’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #156483; 1972 Brown 43P1HH2, 43’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #M723405; 1968 Arrow SPB2240, 40’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #185580; 1968 Arrow SPB40, 40’ T/A Pipe Trailer, Bulk Head, Spring Susp, Vin #185581; 1964 Fruehauf NDF2, End Dump Trailer, 20’ Steel Tub w/40” Sides, Spring Susp, Vin #FWE927301; Talbert Flip Axle, Air Ride; Flip Axle, Air Ride; SERVICE, WATER, FUEL & LUBE TRUCKS: 1982 GMC 15’ S/A Service Van, Dsl, 5 Sp, Elec Lift Gate, Folding Swing Rear Doors, Miles Read: 32,286, Vin #1GDG621F7CV595735; 1982 Chevy 12’ S/A Service Van, Dsl, 4 Sp, PTO w/Hyd Air Compressor, Roll Up Rear Door, Miles Read: 37,018, Vin #1GBJP32MXC3303537; 1984 Mack R686T, S/A Fuel Truck, Mack E6, 275 HP, 5 Sp, 3000 Gal Steel Tank, PTO w/Pump, Hose Reel w/Meter, Miles Read: 95,840, Vin #1M1N184Y9EA088971; 1962 Mack B61, T/A Fuel/Lube Truck, Mack Dsl, 5+2, Spring Susp, 15’ Body, Ingersoll Rand Air Compressor, 9 Product Hose Reels, Miles Read: 104,835, Vin #B613S5337; 1962 Mack B61, Tire Truck, Mack Dsl, 5+2, Day Brook Ottawa Boom, PTO w/Hyd Air Compressor, 16’ Body, 2 Hyd Stabilizers, Vin #B613T5217; 1961 Mack B61, T/A Welders Truck, Mack Dsl, 5+2, Spring Susp, 10’ Body, Miles Read: 213,064, Vin #B613S5201; 1954 Mack B61, S/A Water Truck, Mack Dsl, 5+2, Spring Susp, Steel Tank, PTO w/Pump, Miles Read: 7758, Vin #B71NHB13028; UTILITY, FLATBED & VAN BODY TRUCKS: 1979 Int’l 1954, S/A Flatbed, Int’l Dsl, 5+2, 14’ Dumping Body w/24” Stake Sides, Miles Read: 34,035, Vin #AA195JHA12290; FLEET VEHICLES: 1998 GMC G2500, Van, Gas, Auto, Miles Read: 117,680, Vin #1GTFG25M4W1075123; 1997 Lincoln Continental, 4 Dr, Gas, Auto, Miles Read: 155,205, Vin #1LNLM97V4UY620460; 1997 Mercury Grand Marquis, Gas, Auto, Miles Read: 336,122, Vin #2MELM75W3VX615978; 1997 Ford Taurus, 4 Dr, Vin #1FAP52U1W6116123; 1996 Ford F150, Gas, Auto, Miles Read: 110,099, Vin #2FTEF15NXTCA46474; 1996 Ford F150, Gas, Auto, Alum Tool Box, Miles Read: 129,851, Vin #2FTEF15N5TCA46497; 1996 Ford Taurus GL, 4 Dr, Gas, Auto, Miles Read: 202,400, Vin #1FALP526U4TA232420; 1996 Mercury Sable, Gas, Auto, Miles Read: 142,368, Vin #1MELM50UXTG652104; 1996 Mercury Sable, Gas, Auto, Miles Read: 147,290, Vin #1MELM50U3TA604964; 1996 Mercury Sable, Gas, Auto, Miles Read: 149,104, Vin #1MELM50U4TA647354; 1995 Mercury Grand Marquis, 4 Dr, Gas, Auto, Miles Read: 249,990, Vin #2MELM75W7SX606762; 1994 Ford Crown Vic, Gas, Auto, Miles Read: 368,782, Vin #2FALP74W2SX147852; 1995 Ford Windstar, Gas, Auto, Miles Read: 136,904, Vin #2FMDA5140SBC34052; 1994 Ford F150, Gas, Auto, Miles Read: 170,125, Vin #1FTD15Y4RLA58483; SWEEPERS: 1974 Elgin Pelican UD282, Sweeper, Gutter Broom, Detroit Dsl, Needs Work, Hrs Read: 11,821, s/n 52274; LARGE GENSETS, COMPRESSORS, PUMPS & WELDERS: 1972 Ingersoll Rand XL1200, Skid Mtd Air Compressor, X12 Detroit Dsl, Hrs Read: 922, s/n 70125U72650; 1972 Ingersoll Rand XL1200, Skid Mtd Air Compressor, X12 Detroit Dsl, Hrs Read: 1888, s/n 70128U72650; Ingersoll Rand 125, Tag-Along Compressor, s/n 34881; Ingersoll Rand P100WD, Compressor, s/n 152139; 1994 Miller 600D, 600 Amp Welder, s/n KE609259-CCCV-DC; Miller Mig & Wire Feed Welders; Miller, Airco, Lincoln, Hobart & Westinghouse Welders; 1974 Westinghouse WSH 400, Welder, s/n A4-19; CUSHION TIRE & WAREHOUSE FORKLIFTS: 1980 Cat V60B, 6000 Lb Forklift, Erops, 4’7” Forks, 2 Stage Boom, Dsl, s/n 52J01206; Cat VC60D, 6000 Lb Forklift, Orops, 4’ Forks, 2 Stage Mast, Dsl, s/n 5BC745; Raymond 80CSR40TT, Elec Forklift, Orops, 3 Stage Mast, 42” Forks, Hrs Read: 1594, s/n 080CSR40TT0078S; 1965 Clark CY60, 6000 Lb Forklift, Orops, 3’ Forks, 2 Stage Mast, Propane, Needs Work, s/n CFY6035669; LIGHT TOWERS: Coleman MH4000RDKH, S/A, Portable, 4 Lamps, Dsl, Hrs Read: 2975, s/n RD3203; BUCKETS & ATTACHMENTS: (2) 2010 New Grizzly HT1035 Hyd Thumbs; 2010 New Grizzly MT2650 HD Thumbs; 6.5 Yd Dragline Bkt w/Teeth; 28” Bkt w/Teeth; 60” Clean Out Bkt; 7’10” BOCE Bkt; 4 Sheave Hook Block; Hyd Hammer w/Mole; 4’6” Q/C Forks; 6’3” Q/C Forks; Garbro Concrete Bkt; 2 & 3 Pc Boom Sections, Cutting Bits; SEA & STORAGE CONTAINERS: 20’ Containers; EQUIPMENT & TRUCK PARTS & COMPONENTS: 2 Stage Forklift Mast w/6’ Forks; Hyd Adj 5th Wheel Plates; Pipe Underload Attach; Waldon Q/C Pipe/Caisson Clamp Mdl SA3670J; Misc Tires Mtd On Rims; Cummins Engine; Electric Motors; Conveyor Belts; Conveyor Rollers; Bearings; Misc Motors & Flanges; SNOW HANDLING EQUIPMENT: Viking R1136M 11’ Snow Plow; SUPPORT EQUIPMENT: (2) 2010 New Gentec 3” Water Pumps; 2010 New Gentec (2) PC60 & (2) PC90 Walk Behind Plate Compactors; Tipping Dumpsters; Steel Saw Horses, Work Benches & Tables; Pipe Clamps, Bit Adapters & Collars; Metal Bins; Plastic Product Containers; Elec & Gas Water Pumps; Heaters; Fans; Paint Booth Lights; Welding Rod Dryers; Welding Rods & Wire; Cable Slings & Straps; Misc Machine Parts; Fan Belts; Air Hose; Bolt Bins; Nuts, Bolts & Washers; Chain & Air Cut Off Saws; Welding Carts; Hose, Gauges & Torches; Brackets, Couplers, Grease Guns & Tools; Concrete Vibrators; Air Tools; Grinders; Hose Reels; Pipe Benders; Test Pumps; Job Site Tool Boxes; Jack Stands; Pipe Cutter & Threaders; Pressure Washers; Radial Arm Saws; Table Saws; Paint Stripe Carts; Vise w/Stand; Hose Crimping Machine; Switch Gear; Bench Grinder w/Stand; Horizontal Band Saw; Drill Press; Metal Lathe; Milling Machines; Hyd Presses; Hyd Power Pack; Air Compressors; Drill Bits; Steel Bins; Misc Filters; Cones & Reflector Poles; AND MORE!

MAJOR DEMOLITION & SCRAP HANDLING EQUIPMENT & ATTACHMENT AUCTION for COMPANY WRENCH & OTHER AREA DEALERS FRIDAY, DECEMBER 10, 9:00 AM HOSTED AT COMPANY WRENCH’S FACILITY • 4805 SCOOBY LANE, CARROLL (COLUMBUS AREA), OH 43112 THE MOST ANTICIPATED SEMI ANNUAL AUCTION EVENT IN THE DEMO & SCRAP INDUSTRY

INVENTORY OF NEW & USED DEMOLITION RELATED HEAVY EQUIPMENT & ATTACHMENTS INCL UP TO 50 TON EXCAVATORS, SCRAP HANDLERS, ROTATING SHEARS, PROCESSORS, PULVERIZERS, GRAPPLES, HYDRAULIC HAMMERS, BUCKETS, THUMBS,STICK ASSEMBLIES, ITEMS TOO NUMEROUS TO LIST

QUALITY CONSIGNMENTS OF HEAVY EQUIPMENT & TRUCKS WILL BE ACCEPTED

COMPLETE LIQUIDATION AUCTION of JARLAB ENTERPRISES INC. (Corporation Dissolution) & EXPRESSWAY ENTERPRISES INC. FRIDAY, DECEMBER 17, 10:00 AM • 107 BRIGHTSIDE AVE, CENTRAL ISLIP (Long Island), NY 11722 INVENTORY OF EXCAVATION EQUIPMENT & SUPPLY INVENTORY, ROLLOFF TRUCKS & CONTAINERS, CONSTRUCTION TRUCKS, TRAILERS & FLEET VEHICLES

ONE OWNER AUCTION • NO CONSIGNMENTS

NEW DATE: MAJOR PUBLIC EQUIPMENT AUCTION with equipment from AREA CONTRACTORS & EQUIPMENT DEALERS 275 ROUTE 32, NORTH FRANKLIN, CT 06254 • DATE CHANGE - DTBD, JANUARY 2011 , 9:00 AM DAY 1 - CONSTRUCTION, EARTHMOVING & PAVING EQUIPMENT, TRUCKS & TRAILERS • DAY 2 - CONTRACTOR SUPPORT, AG, LANDSCAPE & MANUFACTURING EQUIPMENT TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days.

ONLINE BIDDING THROUGH EQUIPMENTFACTS.COM AVAILABLE

CALL FOR INFORMATION AND PICTURE BROCHURES. Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100

Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888

275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900 www.petrowskyauctioneers.com

Page 116 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION AUCTION QUINNIPIAC COMMISSION AUCTION

MANAGED BY DAVIS AUCTIONS, INC. SATURDAY, December 4, 2010 9:00 A.M. LOCATION: DAVIS AUCTIONS, INC. 210 CHESHIRE ROAD, RT. 68, PROSPECT, CT

THINK SUNSHINE!!!

Quinnipiac Commission Auction will be conducting our next auction of utility and construction equipment and related supplies on December 4, 2010. This auction will consist of equipment from utility companies; municipalities; contractors; and others. All equipment from utility companies and municipalities are sold in absolute.

Early Consignments from Utility Companies:

(5) 2000-2004 GMC Safari Cargo Vans; (4) 2002 FORD E150 Vans; (2) 2003 & 2001 FORD E250 Vans; 2003 DODGE Caravan; 2002 GMC 2500 Pickup, 4x4; 2001 FORD F350 Crew Cab w/Fisher plow; Several 2000-2003 FORD Rangers, 2wd & 4wd; 2001 CHEV. P30 Step Van, under 40,000 miles; 12+ Utility, Reel, & Material Trailers; Other Items being added daily.

Early Consignments:

CAT 120 Motor Grader; KOMATSU PC150LC-5 Hyd. Excavator w/hyd. thumb; MITSUBISHI 240 Hyd. Excavator; JCB 1110 Track Skid Steer, low hours; 2005 GEHL 5840 Skid Steer; FORD 720 Utility Tractor w/loader, 4x4; FORD 2010 Wheel Tractor w/backhoe, 4x4; FORD 1720 Wheel Tractor w/loader & 3 PtH, 4x4; DIG IT 198 Wheel Tractor w/Loader & Backhoe; JOHN DEERE 550B Crawler Dozer; JOHN DEERE 350B Crawler Loader; JOHN DEERE 510 Wheel Loader Backhoe, 4x4; CLARK Forklift; Skidsteer Attachments; General Purpose Buckets; Grapple Buckets; PROTECH 8’ Snow Pushers; 1996 KENWORTH T800 Tri-Axle Dump, N14 Cummins; 1995 FORD F800 Flatbed w/9 ton hyd. crane, 42” boom; 1997 CHEV. P35 Step Van, w/Saylor Beale air compressor, Ohan commercial 6500 watt generator, & built in workshop; 1993 CHEV. B3500 Step Van w/Ohan 6.0 genset diesel generator & built in workshop; 1997 FORD F800 Dump, diesel; 1986 FORD F800 Dump Truck; FORD F350 Crew Cab; 2002 GEM 4 passenger Electric Car; (2) 2002 CHEV. Ventura Passenger Vans; 1995 JEEP Grand Cherokee, Orvis edition; FORD Crown Victoria; Car Trailers; Utility Trailer; 3 PtH Equipment; Commercial Grade Wood Milling Machine; 12” Planer; Air Compressors; Welders; Generator; Pressure Washers; Trimmers; Water Pumps; Antique Tractor Parts and much much more.

You name it, it looks like it’s coming!! More arriving daily.

This is our early tentative list. Call for updated list mid November. We accept consignments up thru WEDNESDAY prior to sale.

We never know what will be consigned at the last minute – so come to our inspection and find out!

INSPECTION: FRIDAY, December 3, 2010

This is when/where you find out what is really here!!!

TERMS: CASH OR GOOD CHECKS WITH IDENTIFICATION.

9:00 A.M. – 5:00 P.M.

ABSENTEE BIDS ACCEPTED.

Website list frequently updated. If you don’t see what you want here, visit website for updates.

Call for more information: DAVIS AUCTIONS, INC. (203) 758-4087 or 1-800-201-4368 www.davisauctionsinc.com

Auctioneer: Reginald Lussier Lyndonville, VT 05851 NH License# 2413

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 117

SECURED CREDITORS AUCTION LATE MODEL CAT, KOMATSU CONSTRUCTION EQUIPMENT, SUPPORT ATTACHMENTS, TRUCKS & TRAILERS & PAINT BOOTH.

FRIDAY, DECEMBER 3 @ 9:30 AM LEXINGTON, (RICHMOND), KENTUCKY DIRECTIONS: from Lexington: Interstate-75 South exit 95, at top of ramp turn right, go thru stop sign and thru stop light, turn right again. Sale site on first right. Address: 3277 Lexington Road Richmond, KY 404759144 NOTE: Selling in this sale will be late model Cat & Komatsu Earthmoving equipment for a secured creditor.

This equipment is late model, low houred and in excellent condition.

HILITES INCLUDE: BLASTING BOOTH: Global GBB-2520-DT-50S 27ft. x 21ft. x 50ft., PAINT BOOTH: Global CDG060 XWPDT-S 30ft. x 24ft. x 60ft. w/ Exhaust Fan, 10hp Engine, CRAWLER CRANE: Linkbelt LS98A, 2 ARTICULATED HAUL TRUCKS: 1998 Cat 350E, Volvo A30C, 12 HYDRAULIC EXCAVATORS: 2004 Cat 385BL Series II, 2006 Cat 345CL, 2002 Cat 345BL Series II, 2007 Cat 330DL, 2006 Cat 330DL, 2005 Cat 325CL, 2006 Cat 324DL, 2002 Cat 322CL, Cat 320DL, 2006 Cat 315CL, 2006 Cat 304CR, JD 160CLC, SPECIAL CUTTER HEAD MACHINE: 2002 Cat 322CL w/ Shinn S-13-90HT, 6 MOTOR SCRAPERS: Cat 621F, Cat 621F, Cat 621F, Cat 615C-II, Terex TS14B, Terex TS14B, TOOL CARRIERS: 2003 Cat IT28G, 3 RUBBER TIRED LOADERS: Cat 988F, Cat 972G, Cat 966F, 11 CRAWLER TRACTORS: 2005 Cat D8TXL, Cat D8R, Cat D8R, Cat D8N, 2007 Cat D6RXL (winch), Cat D6RXL, 2006-2005 Cat D6NXL, 2006 Cat D5GXL, (2) 2006 Cat D5GLGP, 2001 Cat D4CXLIII, PAVERS: Barber Greene BG240G (completely reconditioned), SOIL COMPACTORS: Cat 825C, 2 VIBRATORY ROLLERS: 2000 Cat CP563D, 2001 Cat CS433C, 2 RUBBER TRACKED SKID STEERS: (2) 2008 Cat 279C, SKID STEERS: 2000 Cat 246, Skid Steer Attachments: Cat Hammer, 8 FORKLIFTS: Cat GC90, Cat DP70K, Cat GC30, Cat DP20K, (2) 2004 Cat CD18K, Taylor Y24WO, Komatsu FD60H, Toyota FDC25, TRENCHERS: 2007 Vermeer RT650, TUB GRINDER: Portec Innovator 20900, HARROWS: 2009 Rome Pull Behind, 2 AIR COMPRESSORS: (2) Atlas Copco GA37FF, GENERATORS: New Whiteman 2500BW, BOOM TRUCK: 1999 Int’l. 4700 (s/a), 2 DUMP TRUCKS: 2002 Sterling (tri.), 1999 GMC C7500 (s/a), 2 TRUCK TRACTORS: 2001 Peterbilt 379 (tri.) - Like New, 575hp Cat, 18 spd., 46R, 105,000 actual miles.), 1998 Int’l. Conventional (s/a), UTILITY TRUCKS: 2004 Peterbilt 379 (t/a), 1990 Int’l. 8100 (s/a), SERVICE TRUCK: 2006 Ford F350 Super Duty (s/a), 2 PICKUPS: 2008 Chevy LT1500LTZ (4x4), Mazda B2200, VANS: 1993 GMC Vandura 2500, 3 DETACHABLE GOOSENECK TRAILERS: 2006 Trailking TK110HDG 55ton (quad.), 2000 Liddell 60 ton (tri.) 4th axle sells separately, 1993 Fontaine TB50 (tri.), VAN TRAILERS: 1991 Trailmobile 48ft. (t/a), 2 UTILITY VEHICLES: 2004 Kawasaki KAF620E5 (4x4), 2004 Kawasaki KAF620E5 (4x4), LARGE QUANTITY OF EQUIPMENT MANUALS: OEM Komatsu Parts & Shop – over 200 Editions, EQUIPMENT PARTS: Crimp On Gates, Hydr. Hose Ends, Pall Filters, Inventory of Various OEM Volvo Machinery parts, FABRICATING EQUIPMENT: Gates GC32XD Hose Crimper, Koa Ming Drill Press, ATTACHMENTS: Excavators: (2) New 2010 New Grizzly HT1035 Thumbs, (3) New 2010 Grizzly MT2650 Thumbs, Skid Steers: Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Frames, 3500-4800-5600 Thumbs, Excalibur Thumbs, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets , SUPPORT EQUIPMENT:Speedaire 10hp Air Compressor, SafetyKleen Parts Washers, Shop Ladders, 2003 Lewis Brothers Sandblaster, New Smartquip Plate Compactors, New Mustang Rammers, New Mustang CV3500 Concrete Vibrator, Submersible Pump, Pintle Hitches, Impact Wrenches, Water Pumps, Air Spray Guns, Chainsaws, Straps, Bottle Jacks, Battery Chargers, Winches, Sockets, Go Karts, Post Hole Diggers, Compressors, Hose Reels, Grinders, Weedeaters, Sandblasters, Grills, Tri-Balls, Generators, Wagons, Tricycles, Trailer Jacks, Welders, Tires, Heaters, Hoists, Lights, Scooters, Scaffolding, Pumps, Fuel Tanks, Concrete Saw, Universal Seats, Impact Wrenches, Chains, Binders, Gentec Water Pumps, Gentec Walk Behind Plate Compactors, (2) 2010 Easy Kleen Magnum 4000.

90% Liquidation AUCTION Late Model Truck Tractors, Reefer Trailers, Support Equipment.

RTT INTERSTATE

THURSDAY, DECEMBER 9 @ 10:00 AM PINE BLUFF, ARKANSAS DIRECTIONS: From Little Rock: I-630E via ramp on left for 1.6 miles. Merge onto I-30 W/ US-167 S/ US-65 S via exit 139B toward Texarkana for 1.5 miles. Take I-440E/ I-530 S/ US-65 S/ US-167 S exit # 138 on the left toward Little Rock/ Nat’l. Airport/ River Port/ Pine Bluff/ El Dorado .2 miles. Merge onto I-530 S/ US-65 S 39.3 miles. Take US-79 S exit 39 toward Camden .3 miles. Turn right onto S Camden Rd./ US-79 .2 miles. Turn slight right onto AR-54W/ Sulphur Springs Rd. 3.1 miles, left onto Farm Lane. Site is on the left. From Tuscaloosa: US-43 N/ US-82 W/ McFarland Blvd/ AL-13N/ AL-6W and continue to follow US-82W (passing through Mississippi, then crossing into Arkansas) 238.6 miles. Stay straight to go onto US-278 W/ US-65 N/ US 65 Hwy N/ AR-144 W and continue to follow US-65N for 78.1 miles. Merge onto I-530 N/ US-65 N/ US-79 S/ Wiley A Branton SR Hwy. toward Little Rock for 6.9 miles. Take the US-79/ US-79 BR exit 39 toward Rison/ Fordyce/ Camden .2 miles. Left onto US-79-BR/ S Camden Rd./ US-79. Continue to follow S Camden Rd./ US-79 .3 miles. Slight right onto AR-54W/ Sulphur Springs Rd. 3.1 miles, left onto Farm Lane. Site is on the left. From Memphis: I40 W (crossing into Arkansas for 126 miles.) Merge onto I-440 W via exit 159 toward Airport/ Jacksonville/ AR-440/ Texarkana 10 miles. Take I-30 W exit on the left toward Hot Springs/ Texarkana .2 miles. Merge onto I-530 S/ US-65 S via exit 138B on left toward Pine Bluff 39.6 miles, take US-79 S exit 39 toward Camden .3 miles. Right on S Camden Rd./ US79 .2 miles, slight right onto AR-54W/ Sulphur Springs Rd. for 3.1 miles, left on Farm Lane. Site on left. Address: 4805 Farm Lane, Pine Bluff, AR 71603.

NOTE: RTT Interstate at this time has decided to scale back it’s operations and sell the following trucks, trailers & support equipment.

HILITES: 10 TRUCK TRACTORS: 2008 Peterbilt 386 (70in. sleeper, 475 Caterpillar diesel engine, 13sp Fuller trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.55 ratio, Diamond Power APU), 2006-2005 Peterbilt 379 (t/a), 2008 Kenworth T600 (studio sleeper, 475 Caterpillar diesel engine, 10sp trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.36 ratio, Diamond Power APU), 2007 Kenworth T600 (86in. studio sleeper, 530 Cummins diesel engine, 13sp Fuller trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.55 ratio, Diamond Power APU), 2007 Kenworth T600 (86in. studio sleeper, 475 Cummins diesel engine, 13sp Fuller trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.55 ratio, Carrier APU), 2006 Kenworth T600 (72in. aero cab sleeper, 475 Caterpillar diesel engine, 10sp Fuller trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.36 ratio, Carrier APU), 2006 Kenworth T600 (72in. aero cab sleeper, 475 Caterpillar diesel engine, 10sp Fuller trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.36 ratio, Carrier APU), 2006 Kenworth T600 (86in. studio sleeper, 475 Caterpillar diesel engine, 10sp Fuller trans, aluminum wheels, 11R24.5 tires, engine brakes, air suspension, 3.36 ratio, Carrier APU), 2006 Kenworth T600 (parts, 475 Caterpillar diesel engine, 10sp Fuller trans, 3.36 ratio), 19 REEFER TRAILERS: 2010 Great Dane 53x102 (Carrier 2100A, California legal, aluminum wheels, 11R24.5 tires), 2010 Great Dane 53x102 (Carrier 2100A, California legal, aluminum wheels, 11R24.5 tires), 2007 Wabash 53x102 ( sliding spread axle, Carrier 2100A, California legal, aluminum wheels, 11R24.5 tires), 2005 Wabash 53x102 (Carrier unit), 2005 Great Dane 53x102 (Carrier unit, aluminum wheels, California legal, 11R24.5 tires), 2005 Great Dane 53x102 (Carrier unit, aluminum wheels, California legal, 11R24.5 tires), 2004 Great Dane 53X102 (Carrier unit, California legal, aluminum wheels), 2004 Utility 53x102 (Carrier unit, thick wall, 11R24.5 tires), 2003 Great Dane 53x102 (Carrier unit, California legal, aluminum wheels, 11R24.5 tires), 2002 Great Dane 53x102 (super seal, Carrier unit, aluminum wheels, 11R24.5 tires), 1998 Trailmobile 53x102 (Carrier unit), 1998 Trailmobile 53x102 (Carrier unit), 2007 Great Dane 48x102 (stainless steel spread axle, Carrier unit, aluminum wheels, California legal, 11R24.5 tires), 2006 Great Dane 48x102 (stainless steel spread axle, Carrier unit, aluminum wheels, California legal, 11R24.5 tires), 2003 Great Dane 48x102 (stainless steel spread axle, Carrier unit, California legal, aluminum wheels, 11R24.5 tires), 2005 Wabash 48x102 (Carrier unit, aluminum wheels, California legal, 11R24.5 tires), 2001 Great Dane 48x102 (Thermo King unit, aluminum wheels, California legal, 11R24.5 tires), 2000 Great Dane 48x102 (Carrier unit, aluminum wheels, California legal, 11R24.5 tires), 1999 Stoughton 48x102 (Carrier unit.), ATTACHMENTS: Skid Steers: Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Frames, 3500-4800-5600 Thumbs, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets, SMALL AMOUNT OF SUPPORT EQUIPMENT & TRUCK AND TRAILER ACCESSORIES. ARKANSAS AUCTIONEER LIC. # 1870 Mark White SALE SITE PHONE: For more info.: contact Mark White @ (205) 454-4646.

KY AUCTIONEER LICENSE #: NP01916 / AUCTIONEER: Jack Lyon.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 118 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com Phone: 315-633-2944 • Dallas, TX Tues., November 30, 2010 For: Construction, Support Equipment, Trucks, Trailers and Attachments • Lexington, KY Fri., December 3, 2010 For: Late Model Cat, Komatsu Construction Equipment, Support Attachments, Trucks and Trailers • Columbus, OH Sat.-Sun., December 4-5, 2010 For: Truck Tractors, Van Trailers, Construction, Support Equipment • Pine Bluff, AR Thurs., December 9, 2010 For: Late Model Truck Tractors, Reefer Trailers, Support Equipment • Racine, WI Fri., December 10, 2010 For: Late Model Cat Construction, Support Equipment and Trucks • Tuscaloosa, AL Sat., December 11, 2010 For: Late Model Logging, Construction, Support Equipment, Attachments, Trucks and Trailers • Kissimmee, FL Wed., December 15, 2010 For: Construction, Support, Attachments, Trucks and Trailers • Saginaw, MI Thurs., December 16, 2010

For: Large Truck Tractors, Dump Trailers, Support Equipment • Atlantic City, NJ Sat., December 18, 2010 For: Construction, Support Equipment, Attachments, Aerials, Trucks Tractors, Dump Trucks and Trailers • Greenwich, NY Wed., December 29, 2010 For: Construction, Support Equipment, Attachments, Tools, Trucks, Equipment and Dump Trailers • Columbus, OH Sat., January 15, 2011 For: Construction, Support Equipment, Attachments, Trucks and Trailers • Orlando, FL Sat. January 30 thru Mon., February 7, 2011 For: 9 DAYS OF SELLING! Construction Equipment, Aerial, Forklift, Dump Trucks, Truck Tractors, Trailers, Support and Attachment • Allentown, PA DATE TBA For: Complete Liquidation of Automotive Dismantling Operation • Little Rock, AK DATE TBA For: Complete Liquidation of Truck Tractors, Van Trailers, Vans, Support Equipment • Ledyard, CT (Foxwood Casino) DATE TBA For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers

Coming Auctions

RITCHIE BROS. AUCTIONEERS www.rbauction.com Phone: 402-421-2631 • Moerdijk, The Netherlands November 25-26, 2010 • Geelong, Australia November 25, 2010 • Truro, NS, CAN November 30, 2010 • Saskatoon, SK, CAN December 1, 2010 • Fort Worth, TX December 1-2, 2010 • Caorso, Italy December 2, 2010 • Montreal, QC, CAN December 2-3, 2010 • Omaha, NE December 3, 2010 • Polotitlan, Mexico December 3, 2010 • Salt Lake City, UT Sherbrooke, QC, CAN December 4, 2010 • Toronto, ONT, CAN December 7, 2010 • Statesville, NC December 7, 2010 • Los Angeles, CA December 7, 2010 • Istanbul, Turkey December 8, 2010

BANKRUPTCY AUCTION UNITED STATES BANKRUPTCY COURT SOUTHERN DISTRICT OF NEW YORK Re: NELSTAD MATERIAL CORP. CASE NO. 09-22918-RDD

TUESDAY, DECEMBER 7 • 11:00 AM

40 HUNTINGTON PLACE, NEW ROCHELLE, NY 10801

TURN-KEY CONCRETE PLANT w/ REMAINDER OF UNDERMARKET LEASE AVAILABLE IN BULK OR INDIVIDUALLY

NY STATE APPROVED PORTEC 12 CUBIC YARD CONCRETE PLANT, EQUIPMENT, VEHICLES, TRADEMARKS, PHONE NUMBER & MORE…

COMPLETE LIST OF ASSETS AVAILABLE ON OUR WEBSITE Alan Nisselson, Esq., Chapter 7 Trustee

DAVID R. MALTZ, AUCTR DCA #762794 • RICHARD B. MALTZ, LIC. R.E. BROKER

516.349.7022

www.MaltzAuctions.com

• Columbus, OH December 8, 2010 • Atlanta, GA December 9, 2010 • Chicago, IL December 9, 2010

• St. Aubin Sur Gaillon, France December 9, 2010 • Olympia, WA December 9, 2010 • Edmonton, AB, CAN December 10, 2010 • Tipton, CA December 10, 2010 • London, ON, CAN December 13, 2010 • Chilliwack, BC, CAN December 13, 2010 • Jackson, MS December 13, 2010 • Dubai, UAE December 13-15, 2010 • Sacramento, CA December 14, 2010 • Minneapolis, MN December 14, 2010 • Northeast, MD December 14, 2010 • Gordo, AL December 15, 2010 • Prince George, AL, CAN December 15, 2010

• Kansas City, MO December 15, 2010 • Denver, CO December 16, 2010 • Nashville, TN December 16, 2010 • St. Louis, MO December 16, 2010 • Tipton, CA February 11, 2011 • Orlando, FL February 15-19, 2011 BAR NONE AUCTION www.barnoneauction.com Phone: 866-372-1700 • Sacramento, CA Sat., December 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., December 17, 2010 For: Commercial Truck and Heavy Equipment Auction BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com Phone: 270-376-2992 • Louisville, KY Thurs., December 9, 2010 For: Construction Equipment, Trucks and Trailers CAT AUCTION SERVICES www.catauctions.com Phone: 866-750-9432 • Twin Cities, MN Wed., December 1, 2010 For: Construction Equipment

DAVIS AUCTIONS www.davisauctionsinc.com Phone: 203-758-4087 • Prospect, CT Sat., December 4, 2010 For: Quinnipiac Commission Auction of Construction Equipment DON SMOCK AUCTION CO., INC. www.dsa-auctions.com Phone: 765-778-9277 • Pendleton, IN Fri., December 10, 2010 For: 18th Annual Snowball Auction – Construction Equipment, Trucks & Trailers FREY & SONS, INC. www.freyandsons.com Phone: 419-455-3739 • Defiance, OH Wed., December 29, 2010 For: Construction Equipment GLOBAL FORCE AUCTION GROUP www.gforceauction.com Phone: 877-631-0650 • Smyrna, DE Sat., December 11, 2010 For: Construction Equipment, Trucks, Trailers and Dump Trucks HUNYADY AUCTION COMPANY www.hunyady.com Phone: 800-233-6898 • Hatfield, PA Wed., December 15, 2010 For: Construction Equipment, Trucks and Trailers

see page 122

crosswords from page 102

C O P M A A L T E C L L S L O O B I E D R A G C H A M P I O N N H N O E M H P L A N T M U S T A N G L E T L C T A H O U N H I T C H E S Y K S K W L B A C K H O E D R U M N O P E L I R I U L O A D E R N O D E A G L E F M L A B U T I L I T Y D R I L L

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 119

MID ATLANTIC CONTRACTORS AUCTION (3) DAY SALE • (2) LOCATIONS Dec 9th, 10th at Frederick Fairgrounds, MD • Dec 11th in Buckeystown, MD After 51 years of Business, Dewey Jordan Inc has decided to close their bridge building division.

Wolfe Industrial Auctions will be selling their equipment absolute.

We will also be selling for various contractors, rental companies, and municipalities.

DAY 1 & 2 – Frederick Fair Grounds, 797 E Patrick St, Frederick, MD

DIRECTIONS: TRAVELING West on I-70 – Take E Patrick St. (Exit 56) to Fairgrounds.

TRAVELING East on I-70 – Take South St. (Exit 55) to Fairgrounds. TRAVELING North on I-270 to I-70 East, continue to South St. Exit 55 to Fairgrounds.

Partial Listings Only Day 1 - Thurs, Dec 9 @ 6PM – Fairgrounds - Guns Absolute liquidation of an impressive local fire arm collection of 30+ fire arms, ammunition, and accessories

FIRE ARM COLLECTION: (2) BROWNING BT99 12 ga trap guns, single barrel, S/N 01175PR199; BROWNING over & under 12 ga trap gun, S/N 69180; BROWNING 20 ga, semi-automatic, S/N 88197; BROWNING 22 Magnum pump riffle, S/N 14968RN176; ITHICA 12 ga trap gun, Grade 4, S/N 404979; MARLIN 25N, 22LR bolt action, S/N 04519858; REMINGTON 31 TC 12ga pump trap gun, S/N 74950; REMINGTON 1100, 12 ga semiautomatic, S/N 154961V; REMINGTON 1100 LW 410 semi-automatic, S/N N101109H; REMINGTON 572, 22 caliber BDL deluxe field master, S/N 1715181; STEVENS 58, 20 ga bolt action; (2) RUGER 10-22 carbine, 22 semi automatic stainless steel barrel Tasco scope; WINCHESTER Centennial 66, 30-30 lever action, gold trimmed, S/N 23637; (2) WINCHESTER 94, 30-30 lever action, S/N 3221418, S/N 3225536; (2) WINCHESTER 12, 12 ga pump, S/N Y2026753, S/N 1870480; WINCHESTER 290, 22 semi-automatic w/scope; WINCHESTER 70, 243 caliber, S/N Y2026753; SMITH & WESSON revolver, 22 caliber; BROWNING 22 snub nose revolver; RUGER RED HAWK, 44 mag revolver, stainless steel; THOMPSON ENCORE, stainless 20 ga, black pwd barrel w/Simmons scope; BEEMAN GS100, 22 caliber compressed air riffle; LIBERTY gun safe, 46 gun safe w/temp cntrl; var misc ammunition; PACIFIC 366 reloader; MFC reloader; 6 full bags of shot; 200 yr old anvil; cleaning kits, scopes, cases & accessories.

ROCK TRUCKS/SCRAPERS/GRADALLS: CAT D350E Series II, art, S/N 2XW00478; CAT D350E Series II, S/N 2XW00480; CAT D350E, art, S/N 2XN00169; VOLVO A20, art, 20 ton; DJB350, art, tailgate; (2) DJB 350; GRADALL 4100 XL, S/N 0415536; GRADALL 4100 XL, S/N 0415201; GRADALL 880E, tracks, S/N 0125283; GRADALL G660C, S/N 01619387; CAT 12G, art, rear scafire, cab, heat, new Cat dsl , S/N 61M12102; TEREX TS14B, S/N 27926.

CRANES: ’82 LINKBELT LS108, 45 ton, 80’ boom, exp tracks, 3 drums, pwr down, frt & rear fair leader, block & ball, Detroit 471, straight drive, 1 owner; ’74 LINKBELT HC108, TC 100’ boom, 3 drum, Detroit 471 dsl, hyd outriggers, ps; LORAIN LRT 275D, 4x4, tube block kick out, 72” boom w/JIB, Cummins dsl, S/N 79766; GROVE RT60S, jib, new engine.

COMPACTION EQUIP: CAT 815B, new pads, leveling bld, S/N 17Z00802; CAT CS563C, S/N 4KN00723; CAT CS 551 dirt roller, S/N 6ZD00165; ’06 CASE SV212 rental fleet, ’06 CASE SV208 rental fleet; IR SD100, 84” drum w/shell kit, S/N 158905; ’05 VIBROMAX 265, dd asphalt roller; WACKER RD 11A, DD asphalt roller, Honda gas eng; MULTI QUIP AR13 G, dd asphalt roller, 624 hrs, S/N 220501; (4) WACKERE RT 820 trench pack rollers, dsl; pull behind compactor.

LIFTS: CAT TH63, 6K lb, 34’, fork rotation S/N SWM01124; SELLICK S88, 8K lb, 42’; GROVE T60 manlift, 4x4, 60’, Deutz dsl, S/N 256994; JLG 120 HX, 120’, 4x4, Deutz dsl.

CRAWLER LOADERS: CAT 963B, orops, new uc, S/N 9BL01451; CAT 963B, cab, gp bkt, S/N 9BL03116; CAT 953B, orops, gp bkt, S/N 5MK09412; CAT 953, erops, gp bkt, S/N 20Z04354; JD 455G, 4-1 bkt, S/N 805676.

SKIDLOADERS: CAT 247, cab, aux hyd; TAKEUCHI TL130, cab, 72” bkt, aux hyd, 900 hrs; TAKEUCHI TL26, new trks & sprockets, 72” bkt, aux hyd; (2) JD CT322, aux hyd; JD 320, aux hyd; JD 250, aux hyd, 72” bkt, rear weights; (2) JD 260, aux hyd, 72” bkt; BOBCAT S220, aux hyd, 72” bkt; BOBCAT T200, aux hyd, 80” bkt, S/N 518917623; BOBCAT 864, cab, heat, a/c, high flow; BOBCAT 864, cab, heat, aux hyd, 80” bkt, 18” tracks; BOBCAT 773H, high flow, cntrl kit, 1321 hrs, S/N 519011356; NH LS180, cab, heat, weights, 72” bkt; CASE 1845C, Cummins dsl, aux hyd, 72” bkt.

ATTACH: CAT 78” grapple bkt; post hole auger; BOBCAT 60” broom; JD BA 84, 84” mtd broom.

CRAWLER DOZERS: CAT D6H Series II, S/N BZF06406; CAT D4 G XL, orops, 6-w bld, hystat trans, S/N CFN00191; ’03 CAT D3G XL, orops, rubber, S/N MHK013319; JD 750 B, 6-w bld, 22” pads, S/N 766150; JD 450H LGP, orops, 6-w bld, S/N X936675; JD 450G, orops, 6-w bld, S/N F767544; KOMATSU D21-6, straight tilt bld, S/N 61939.

TRACTORS/AG EQUIP: JD 2350, qtach 620 loader, 3pt, dual remote pto; CASE 380B, Curtis cab, loader, pto, shuttle shift; IHC 244, 3pt, pto; FARMALL H, drew bar pto; FORD 600, 3pt; JD 14’ disk; ROME 10’ disk; YORK rake, hyd, pwr angle scafire.

HYD EXCAVATORS: CAT 330 BL, hyd qtach bkt, S/N 3YR00331; CAT 325L, thumb, qtach, 42” bkt, S/N BFE00335; ’06 CAT 318 CLN, plumbed, S/N KGPA00404; ’01 CAT 315CL, aux hyd; ’07 CASE CX240, “Demo”, hyd qtach, plumbed, 23.5 hrs w/warranty; ’06 CASE CX240, hyd qtach, plumbed, 840 hrs; HITACHI EX220 C, plumbed, S/N 1585417; HITACHI EX 200LC-2, cab, coupler, 42” bkt; HITACHI EX100-2; JD 160 LC, cab, heat, a/c, aux hyd, thumb, 36” bkt, 10’3” stick, S/N 041432; ’05 CASE CX36 ZTS, cab, heat, a/c, qtach, plumbed, leveling bld, 901 hrs; JD 35C ZTS, orops, qtach, plumbed, leveling bld, 863 hrs, S/N 231707; ’04 CASE CX14 ZTS, aux hyd, exp tracks, selectable cntrls, leveling bld, 964 hrs, S/N DEE0001123; MINI - KOMATSU PC 15R; ATTACH – 42” CF bkt for CAT 345; 60” bkt for CAT 350.

ATV & MOWERS: ’09 KAWASKI Mule, 3100, 4x4, gas, elect dump, 114 hrs; JD Gator, 6x4, dsl, BUSH HOG 25, zero turn mwr, 393 hrs; BOBCAT 2200, dsl, 4x4, pwr dump, 328 hrs.

Day 2 - Fri, Dec 10 @ 8:30AM, Fairgrounds Equip, Trucks & More

LOADER BACKHOES: ’03 CAT 420D, cab, e-hoe, pilot cntrls; CAT 420D, ehoe, cab, a/c, 4x4, qtach, S/N FDP02752; ’04 CASE 590 Super M – II, ehoe, cab, a/c, ps, ride cntrl, 4-1 bkt, plumbed, hyd pressure cntrl, pilot cntrls; ’05 CASE 580 Super M, e-hoe, cab, a/c, 4x4; ’08 KOMATSU WB1465, e-hoe, cab, heat, a/c, ps, r/c cntrl, 600 hrs; ’05 KOMATSU WB140-2 ehoe, cab, heat, a/c, 4x4, 24” bkt, pilot cntrls, S/N A21604; CASE Super E; NH 555E, cab, heat, 4x4, 24” bkt, S/N 31004594; KUBOTA L35, 4x4.

RUBBER TIRE LOADERS: CAT 966D, cab, heat, L-4 rubber, gp bkt; CASE 721D, ACS qtach, forks, bkt, 3rd valve; CASE 621XT, cab, heat, ps, ACS coupler, gp bkt, 3rd valve, 17.5x25 rubber; ’07 KOMATSU WA320-5, cab, heat, a/c, ride cntrl, auto shift, 23.5x25 rubber; KOMATSU WA250-5, cab, heat, a/c, JRB coupler, 3rd valve, gp bkt, 20.5x25 rubber, S/N 70382; KAWASAKI 70 ZV, cab, heat, a/c, 3rd valve, ps, high tip bkt, 20.5x25 rubber; CAT qtach forks w/ top clamp.

301-898-0340 800-443-9580

AIR COMP/GENERATORS/WELDERS: IR P90 air comp; IR 175 air comp, Deutz dsl, 900 hrs, S/N 152679U86953; IR 375, Deutz dsl; LINCOLN arc welder, SAE350; SULLAIR 185 Z, ac, JD dsl; TITTON 525, 5000 watt gen; HOBART welder; LINCOLN 300 elec welder, 220 volt; (2) LINCOLN 200 welder; LINCOLN arc welder, SAE250; LINCOLN Ranger 9 elec welder, 1258 hrs; GARDNER DENVER 750 wagon whl air comp.

DAY 3 - 6727 Manor Woods Rd, Buckeystown, MD

DIRECTIONS: TRAVELING on I-270 – Take 85S (Exit 31B) toward Buckeystown, turn slight right onto 85S. Sale site is on the left.

SMALL MISC: New- EASY KLEEN hot water pressure washer, Magnum gold, 4000 psi, 12V, 15hp gas; EASY KLEEN plate tampers, 6.5 hp eng & water tank; various pallets of racking & shelving; (4) rolls of environment ground cover; (9) bundles of new oak stakes; safety slings; (14) rolls of pod liner; (2) WACKER BS50-2 jumpin jack tampers; FCS 633 GC concrete chainsaw; (4+) DAVID WHITE lazers, transits & site levels; (2) ’06 SPECTRA DG711 pipe lazers; WACKER BS 50-21; WACKER BS 500; torch set on cart; (10) 24” plastic corrugated pipes ROAD TRACTORS: ’00 IHC Eagle, T/A, Cat C15 dsl, 10spd, sleeper; ’97 PETE 379, Tri/A, day cab, 550 Cat dsl, 8LL, wet line 30K mi on rebuilt Cat; ’97 PETE 379, T/A, Cat 3406 dsl, 475hp, 10 spd, wetline, sleeper; ’96 KW W900, T/A, Cat 550 dsl, 8spd, sleeper; ’94 IHC 8100, S/A, Cummins dsl, 9spd, Jake brk; ’75 MACK RD686S, T/A, 9500 frt, 17K rear.

DUMP TRUCKS: ’06 FL FL112, 515hp Detroit dsl, EF 8LL, steerable lift axle, Alum whls, 16’ Ox body, barn door, 20K frt, 46K dbl locking rear; ’05 WESTERN STAR, Tri/A, Cat C15 dsl, 18spd, Road Ranger 18’ steel body, 18K frt, 46K rear, air tarp, walking beam susp; ’99 KW T800, Q/A, Cat C12 dsl, 445hp, alum body; ’96 MACK CH613, Tri/A, 9spd, 16’ steel body, 67K mi; ’99 GMC C6500, 3126 Turbo, Cat dsl, 6spd, 14’ flatbed; ’99 FORD F650 XLT SD, 6spd, 16’ stakebody, 26K gvw, under CDL; ’96 FORD SD, PS dsl, 5spd, 14’ stakebody; ’90 FORD F800, S/A, Ford 240 inline, 10spd; ’89 IHC 4700, crewcab, 18’ stakebody, 350 aux energy absorption crash cushion, 4484 mi.

FLATBEDS: ’07 FORD F550 XL utility, SD dsl, auto, crewcab, 12’ flatbed, toolboxes, ladder racks, 23K mi; ’07 FORD F550 XL utility, SD dsl, 6spd, 12’ bed, toolboxes, 22K mi; ’07 FORD F450, crewcab, dsl, auto, 10’ steel bed, 74K mi; ’04 FORD F450, crewcab, dsl, 6spd, 4x4, 10’ steel bed; ’01 FORD F450, 7.3 dsl, auto, 9’ steel bed; ’00 GMC T8500, T/A, auto, 24’ bed, lift gate, 82K mi; ’97 VOLVO, T/A, auto, 24’ bed, liftgate, 61K mi; ’96 IHC 4900, T/A, DT466, 18’ alum bed.

SPECIALTIES: ’07 FORD F550, dsl, auto, Maintaineer 3216 crane & body, hyd air comp, rear hyd stabilizer, 94K mi; ’06 FORD F550 XL SD, PS dsl, 6spd, 11’ Reading body, 1015 IMT Intimidator crane, 45K mi; ’05 FORD F450, PS, auto, 13hp air comp, Hobart welder, IMT 2020 crane, hose reels, outriggers, 62K mi; ’05 FORD F550 XLT, crewcab, Lariat Western Hauler, 4x4, air ride, 100K mi; ’02 FORD F550, 7.3 dsl, auto, Western Hauler body; ’01 IHC 4900 rollback, S/A, DT466, 8spd, 26’ Danco bed; ’98 FL 60 business class mech trk, 3126 Cat dsl, 5+2 trans, pto, air comp, 5005 auto crane, Miller Bobcat 225 welder, outriggers, Reading body, Alcoa whls, 25500 gvw; ’97 MACK FLT 113 fuel lube trk, T/A, E7 460 Mack, 8spd, 1500 gal fuel tank, 250 waste, 9 product tanks, pumps, hose reel, 240V gen, pto driven pressure washers; ’97 FORD F450 bkt trk, dsl auto, 36’ bkt, gen, air comp;’95 IHC 4700 mech trk, DT466, 6+ trans, Stellar 8000 lb crane, air comp, hyd outriggers; ’90 FORD F800, dsl, 50’ TECO boom, winch, jib; ’87 FORD F700, dsl, 5+2 trans, Elliot 1500 gal tank, pto driven, frt rear and side discharge, 12K mi; ’84 FORD F700, dsl, 5+2, ab, 16’ flatbed dump, Knuckle boom Hiab 950 crane, dual cntl outrigger, S/N 445;’83 FORD F700, dsl 5+2 trans, 16’ flatbed, 16’ scissor lift.

CAB & CHASSIS: ’04 FORD F650, dsl, 6spd, hyd brks, under CDL, 95K mi; ’06 FORD F550, dsl, 6spd, 4x4; ’01 IHC 4900, S/A,DT466 dsl. 6spd.

PICKUPS: ’06 FORD F250, crewcab, gas, auto, 4x4; ’05 FORD F150, extcab, gas, auto, weather guard; ’05 GMC 2500, extcab, gas, auto, 4x4; ’04 FORD F250 XL SD, crewcab, dsl, auto; ’04 DODGE 3500 Larami, crewcab, dually, 4x4, Cummins dsl, auto, loaded, leather, navigation; ’04 CHEVY 2500 HD LS, Duramax dsl, 4x4, extcab, util cap, ladder racks; (2) ’03 CHEVY 3500 HD, ladder racks, toolboxes; ‘02 FORD F250, extcab, gas, auto; ‘ 02 FORD F150, gas, auto, a/c; ’01 GMC 1500, gas, auto, 4x4, a/c; ’00 FORD F350 XLT, extcab, 7.3 dsl, auto, 4x4; ’99 FORD F250 XLT SD, V8 Triton, extcab, long bed; ’99 FORD F250 XL, extcab, dsl, auto, 4x4; ’99 FORD F250, 7.3 dsl, auto, 4x4, 71K mi; ’99 FORD F150, extcab, gas, auto; ’99 FORD F150, extcab; ’94 FORD Ranger XLT, gas, 5spd, 38K mi.

TRAILERS: ’00 FONTAINE TH55 LE, air bag susp, detachable gn, 110K gvw; ’98 CAR MATE encl, barn doors; ’91 DORSEY alum dump trl, T/A, air ride, tarper, coal shute, 42’; ’86 TRAILMOBILE, T/A, 45’ flatbed, 65K gvw; ’78 DORSEY, T/A, 42’ flatbed; ’75 SMITHCO 35 ton detach; 8500 gal tanker, T/A, rear discharge, no title; (2) 20’ job trl; 40’ mobile office; 14’ stakebody, T/A, utility; (2) mobile water tank, 250 gal, Briggs Stratton pwr, 2” centrifugal pump; (24) 20’ storage containers, many varieties.

ROAD CONTROL SIGNAGE/LIGHT PLANTS: (3) solar pwr Telescopic msg bd; (6) PROTECTO flash arrow bd, solar pwr; (25+) alum sign stands; numerous signage, flagging & safety cones; TELESPORT sentinel portable msg bd; (400+) safety rd barrels; solar pwr msg bd; (200) crash barrels, univ module 350; COLEMAN MH4000, Kubota dsl; (2) SITE LITE SL4000, Kubota dsl.

Day 3 - Sat, Dec 11 @ 9AM, Buckeystown, MD CRANE ACCESSORIES: LINKBELT HC 98 truck crane, 60’ boom, bad trans; boom sections – Lima 700 -20’, 108- 10’; 12 rolls of cable, 1/2” to 1’1/4”; lifting basket; crane line, friction collars; sheeting knocker; 30’ beam girder dogs; adj beam girder dogs; safety crash cushion; new sling; (4) concrete bkts; (3) 550 rolls of new non-rotating wire rope; DRH JOHNSON 70 ton working capacity crane block; 12 misc crane blocks & hooks; clam shell bkt; 100+ demo mats; 25+ needle beams.

ENGINE & PARTS: (2) DETROIT 671, dsl eng; DETROIT 671; DETROIT 453 rebuilt; DETROIT 471 rebuilt; several WISCONSIN eng; (4) PETTER dsl eng; (3) new DETROIT mufflers; (5) DETROIT blowers; pallets of rollers for D6D, D9, and D3; Idlers & sprockets; DETROIT parts; 100+ new CAT cutting edges; CAT 3208 dsl eng; new bkt teeth.

SHOP EQUIPMENT: DAKE T58 50 ton press; CRAFTSMAN 1hp drill; TRADESMAN drill press; horizontal grinding whl, HD drill press w/var bits; ’06 GRIZZLY G7209 table saw, 14”, 220 single phase, 5hp, S/N 401643; RIGID tablesaw; ENGLO shop comp; TETAN twin tank air comp; TITAN industrial air comp; KNIGHT 2 ton stationary crane; 6’ & 18’ welding tables; several hyd jacks, jack stands &wheel dollies.

LUMBER: 12 bundles of 4x4; 16 bundles of 100, 4x4 post; 4 bundles of 44, new 4x4 post; 4 bundles of 58 new 3/4” plywood.

LG MISC: drag box; KOHLER air comp; various 2” & 3” water pumps; (7) 40’ heavy I beams; 1000’ heavy rebar; 200’ bridge walk & supports; 800’ drill pipe.

HAMMERS PILE DRIVING: sheet pilling, z sheeting; ALLIED 750 hammer; (10+) hammer bits; ATLAS COPCO 410 hammer SS; breaker bits; ECA hyd pwr unit.

BOX TRUCKS : ’03 IHC 7400, DT466 IHC dsl, 6spd, 26’ box; ’01 IHC 4900, DT466 IHC dsl, 6+1 trans, 26’ box; ’81 FORD 7000, 3208 Cat dsl, 5+2 trans, 16’ box.

LG MISC: ’07 EASY LAWN L90 hydro seeder, 2cyl gas, S/N 1E9JT172XG263111; ’07 FINN T75 hydro seeder, Kohler command pro 25, Honda 120 filling pump; AIRMAS PDS 185S, Izuzu dsl eng; REINCO TM730 straw blower, 4cyl Wisconsin gas, skid mt; Barrier hook; blast matting; 20’ trench box w/cert papers; WALDON sweep master BB, Cummins 239, cubic inch dsl, mobile broom, S/N 22345; 1000’ J Hook concrete barriers; CASE DAVIS 1000 track trencher, 459 hrs, S/N 1155751; LAYMORE 8B, Kubota dsl, 787 hrs, S/N 72928781; SANDER PS65 supermax walk behind concrete saw; portable loading ramp made w/oak, 50K lbs, 102” width, adj height 38”-60”, 25’ length; New Tires – (5) 33.5x33 GENERALS; (3) 27x33 FIRESTONE; (4) 26.5x25 BROADWAY; (1) 18x25 GENERAL, (1) 24x25; (2) 100x24, 15.5x25.

UTILITIES: ’07 FORD F550 XL, crewcab, dsl, 14’ flatbed, util boxes, ladder rack, tow pkg, 53K mi; ’07 FORD F550, dsl, 6spd, 12’ util, ladder racks, toolboxes, 22K mi; ’07 FORD F550 XL, crewcab, dsl, auto, 4x4, 12’ bed, ladder racks; ’06 FORD E350 cut-a-way van; ’05 CHEVY 2500 HD, extcab, V8, auto, 4x4; ’04 FORD F450 XLT, extcab, dsl, auto, 4x4 Lariot welders body, tow pkg; ’04 CHEVY 3500 cut-a-way van, gas, auto, 45K mi; ’03 CHEVY 2500 HD, V8, auto, 4x4; ’01 FORD F350 XL SD, V8, auto, encl; ’93 FORD F350, dsl, auto, 4x4.

SMALL MISC: HYDRO TEK SC30005 steam cleaner, 16hp, Honda, detergent 115V gen, dsl, dual burners; HYDROTEK HX2100 steam cleaner, dsl, 2100 psi; 15+ var size trash pumps; 100+ concrete blankets; ?” all thread; 15+ job boxes; 15+ concrete vibrators; concrete pins; torch leads; PVC pipe 4” conduit; (2) 1000 gal water tanks; underwater burning rods; PVC fittings; 30 roadway steel plates; containment for fuel tanks; (1) 24” plastic corrugated pipe; 50+ Lolly columns; 3 new toolboxes; 4 new side mtd alum toolboxes; DEWALT chop saw; oil pump; 5 propane heaters; 4 portable flood lights.

VEHICLES: ’02 CHEVY Cavalier, 4 cyl gas, 5spd; ’00 PLYMOUTH Neon, gas, auto; ’97 FORD Taurus GL, gas, auto; ’78 LINCOLN Continental Mark V, 2dr.

TRAILERS: (25+) 20’ various types of storage containers; ’74 & ‘73 CLARK flatbed, T/A, 42’; ’75 FONTAINE 75’ stretch pole, T/A, 69K gvw; (7) 40’- 48’ storage trl.

SALE CONDUCTED BY

9801 Hansonville Rd, Frederick MD 21702

TERMS OF SALE: Complete Payment on Sale Day with CASH or CASHIERS CHECK. Company or Personal check accepted only if accompanied by a “Current Bank Letter of Guaranteed Payment.”

Visa & MasterCard accepted - a 5% administrative fee charged on all noncash/non-check purchases.

PRESALE INSPECTION: Thurs, Dec. 9th from 10:00am to 5:00pm.

*BUYERS PREMIUM of 10% will be charged to buyer, on all lots $2,000.00 and under.

UPDATED LISTS AVAILABLE ON OUR WEBSITE: wolfeauctions.com

Page 120 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Sells More Than 800 Lots in Pittsburgh

R

itchie Bros. Auctioneers sold more than 800 lots — including 23 crawler tractors and 22 hydraulic excavators — at its Pittsburgh, Pa., auction held Nov. 11.

Crawler tractors lined up as far as the eyes could see at the Ritchie Bros. Pittsburgh, Pa., auction.

This Cat D9L crawler tractor with ripper was sold at the auction.

Five Cat 773B rock trucks found new owners at the Ritchie Bros. auction.

Two Komatsu D155Ax-6 crawler tractors were sold at the auction.

A packed house awaits the next item up for bid.

These Cat 769C rock trucks were among six that sold Nov. 11.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 121

Online Auction Thursday, December 9 Featuring equipment in MD

2008 CAT CS-433E

2006 CAT 972H Wheel Loader

2005 Case 420

2003 CAT D8RII

2000 Daewoo S200 W5K

1998 Komatsu PC300 LC-6LC

1992 Mack RD688S

CAT D4C Series II

JCB 214 Series 2 4x4

Visit our website to see the complete list of equipment, review the guaranteed inspection reports, and place your bids.

Inspected and Guaranteed

IInspected ands Guaranteed www.ironplanet.com 888-433-5426 Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Page 122 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AUCTION: Sat, Dec 11 at 9am th

After 25 years in the construction business industry Steve Cahall of Ralph Cahall & Son Paving, Inc. has decided to liquidate all assets at absolute auction.

BACKHOES & SKIDLOADERS

Case 580M Turbo backhoe, 4x4, cab, ext. hoe, 2 stick control, s/n JJG0309480; 2004 CAT 257B track ldr, s/n 0257BESLK00628; 2006 Takeuchi TL140 track ldr, s/n 21403013; Takeuchi TL140 track ldr, s/n 21404591

RUBBER TIRED LOADERS

Volvo L150 articulated ldr, cab, gp bkt, 23.5xR25 radial rubber, s/n L150V60029; Case 621C articulated ldr, cab, gp bkt, s/n JEE0122855; Takeuchi TW80 wheel ldr, cab, s/n 105111

DOZERS &GRADERS

Case 850G Long Track Dozer, o/rops, w/sweeps, 6 way blade, s/n JJG0253934; CAT 12 Motor Grader, s/n 9T4960

EXCAVATOR

Case CX290 hyd. exc., a/c, cab, s/n DAC0729107

PAVER & ROLLERS

1996 Blaw-Knox PF3180 paver, rubber tired, Cummins dsl, 10-16 screed, wet slide, s/n 318002-02; 1995 Ingersol Rand DD90, s/n 140594; Ingersol Rand SP54, smooth drum, s/n C1518; 1996 Bomag BW120ADS, s/n 101170511016; 1998 Ramma RW1404 trench roller, s/n 325129

SCRAPERS & TRACTORS

1993 Reynolds 14C pull pan, s/n 25293; 1999 Reynolds 14CS pull pan, s/n 30852; Case IH 9250 articulating tractor, 4WD, 12 forward gears, 3 reverse,

4 remotes, 30.5x32 Timberskid rubber, setup for the scrapers, s/n JDB0029081; 1982 JD 301 Tractor w/ broom, 3pt PTO, s/n 301AD387439T; International 2544 Broom Tractor – parts, s/n 2320463U016286

FORKLIFTS

Towmotor LT56RS 6000lb forklift, s/n M56560520; Clark 6024 Yard Lift, 6000lb, s/n Y60695LA

WELDERS & PUMP

Miller XMT304 welder, s/n KK038444; Miller 135 welder, s/n LB204357; Miller 280 welder, s/n LB093327; Cornell 6” dewatering pump, Detroit dsl, skidmounted

ROAD TRACTOR & DUMPS

1999 379EH Peterbilt, t/a, daycab road tractor, Cummins dsl, 10 spd, 40k rears, air ride suspension, air ride cab, wetline, s/n 1XP5D69X7XN505591; 1998 International 9370 Eagle tri-axle dump, lift 3rd axle, 16’ R&S alum dump body w/electric tarp, N14 Cummins dsl, 8LL trans, Hendrickson susp, s/n 2HTFBAET7WC056616; 1997 Ford LT9000 tri-axle dump, lift 3rd axle, 16’ J&J steel dump body w/ electric tarp, 3406 CAT, 350hp, dsl eng, 8LL trans, Hendrickson susp, s/n 1FDZU90X5VVA06511; 1993 Ford F350 crewcab dump, dsl, auto, s/n 2FTJW35MXPCB05731; 1985 International S1600 crewcab, s/a flatbed dump, dsl eng, 5 spd, s/n 1HTLAHEM9FHA41425

UTILITY & PICK UP TRUCKS

2000 Ford F550 Utility, dsl, auto, s/n 1FDAF56F3YEA41373; 2003 Ford F250, dsl, auto, s/n 1FTNF20F03EA73445; 2002 Ford F250, dsl, auto, s/n 1FTNF20F12EC06454; 2001 Ford F250, dsl, auto,

s/n 1FTNF20F01EB08823; 1999 Ford F250, dsl, auto, s/n 1FTNF20F1XEE14650; 1999 Ford F250, dsl, auto, s/n 1FTNF20F7XEE96187; 1999 Ford F350 crewcab, dsl, auto, s/n 1FTSW30F4XEC42929; 1997 Ford F350 crewcab, dsl, auto, s/n 1FTJW35F6VEC01283; 1996 Ford F250, dsl, auto, s/n 1FTHF25F4TEA26103; 1996 Ford F250, dsl, auto, s/n 1FTHF25F4TEA25453; 1988 Ford Superduty Stakebody – parts, s/n 2FDLF47M4JCB08123

TRAILERS

2000 Rogers Croucher 50 ton, tri-axle, detachable equip trl, air ride susp, lift 3rd, s/n 1RBH50300YAR23711; 1989 Hurst Tagalong trl, s/n 1H9T51636K1057041; 1997 Towmaster 4E22 trl, s/n 4KNTT1216VL162048; 2007 Pequea 80125 trl, s/n 4JA8012527G114239; 1988 Hudson Tagalong trl, s/n 10HHA1404J1000052; (2) 8x28 s/a office trl; 10x36 t/a office trl; 2005 Eager Beaver IDHA-PT, s/n 112HZN3155L069477

AIR COMPRESSORS

Airman PDS 185S tow behind air compressor, Isuzu dsl, s/n 536A10622; Buckeye, shop compressor, s/n 862722; Saylor Beau, s/n 5119M95

GENERATORS

MMD/NAC NGK4300H generator, s/n H0011200; MMD/NAC NGK4300H generator, s/n H0008816

LASERS

Topcon RL-H15A Rotary Laser, s/n UZ0779; Topcon RL-H3C Rotary Laser, s/n 3N3027

SIGHT LEVELS

David White LT6-900, s/n D178651; David White 8926 Site Level, s/n AN175698; David White Transit

Ralph Cahall & Son Paving, Inc. 2935 South Dupont Blvd., Smyrna, DE 19977

LT8-300, s/n A501497; David White Transit LT8-300, s/n A501472; Berger Site Level #300, s/n 300-8917; CST/Berger Sight Level, s/n M125546; Northwest Sight Level NSL500, s/n 036762; Topcon AT-G6, s/n AU8303; David White L6-20, s/n 174812

SNOW EQUIPMENT

(3) Meyers 8’ snow plows; (2) Meyers 10’ snow plows; (2) Avalanche DLA20014 snow boxes

FISHING BOAT

2005 Contender 36ft Fisharound, 10’ beam, Triple 250 Yamaha four strokes, 420 gals fuel, 35 gals fresh water, large fish box, live well, 18’ Top Gun outriggers, Raymarine electronics, 48 mile open array radar, 5kw generator, flat screen tv, closed in head w/ shower, microwave, refrigerator, tackle station, drink & food cooler, am/fm/cd player w/connection for ipod & more, Ready To Fish! This boat to be sold with reserve.

MISCELLANEOUS

5’ 3PT Box Scraper; 6’ 3PT Box Scraper; 8’ 3PT Box Scraper; Chain saw; MS 290 Stihl chain saw; (8) Stihl chop saws, gas eng.; (2) Bomag Jump Tampers; (2) Topcon TPL4G Pipe Lasers; Topcon Pipe Laser; AGL Grade Light 2500 Laser; Wacker Plate Tamper; (2) Bomag Plate Tampers; Hydrotek pressure washer; Water-Ace pump; Wacker 2” trash pump; Multiquip

from page 118

IRAY AUCTIONS www.iraymn.com Phone: 320-968-7230 • Foley, MN Fri., December 3, 2010 • Foley, MN Fri., March 4, 2011 • Sioux Falls, SD Fri., March 25, 2011 • Portage, WI Fri., April 15, 2011 • Lime Springs, IA Fri., May 20, 2011 • Foley, MN Fri., June 3rd • Sioux Falls, SD Fri., June 24, 2011 • Portage, WI Fri., July 15, 2011 • Lime Springs, IA Fri., August 19, 2011 • Foley, MN Fri., September 16, 2011 • Sioux Falls, SD Fri., September 30, 2011 • Portage, WI Fri., October 14, 2011 • Lime Springs, IA Fri., November 18, 2011 • Foley, MN Fri., December 2, 2011

IRON PLANET AUCTIONS www.ironplanet.com Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Thurs., December 2, 2010 For: Construction Equipment • Thurs., December 9, 2010 For: Construction Equipment • Thurs., December 16, 2010 For: Construction Equipment J.M. WOOD AUCTION COMPANY www.jmwood.com Phone: 800-447-7085 • Montgomery, AL Thurs.-Fri., December 2-3, 2010 For: Construction Equipment and Trucks JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com Phone: 800-426-3008 • Kenmore, WA Sat., December 4, 2010 For: Contractors Equipment, Trucks, Vehicles J.M. WOOD AUCTION COMPANY www.jmwood.com Phone: 800-447-7085 • Montgomery, AL Thurs., December 2, 2010 For: Construction Equipment & Trucks

MEEKINS AUCTION COMPANY www.meekinsauction.com Phone: 800-499-6560 • Lumberton, NC Tues., December 28, 2010 For: 16th Annual December Contractors Auction MOTLEY’S AUCTION & REALTY GROUP www.motleys.com Phone: 804-232-3300 • Richmond, VA Fri., December 10, 2010 For: Excavators, Trucks, Trailers and More!

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com Phone: 860-642-4200 • Plainville, CT Fri., December 3, 2010 For: Construction Equipment, Trucks, Trailers, Tools and Fleet Vehicles

Attend LIVE or Bid ONLINE! Simulcast online bidding before & during the live auction at

www.equipmentfacts.com Sample Bank Letter: This letter is to confirm that (Bank Name) will honor checks drawn in an amount of (Amount) from (Account Number) in the name of (Buyer’s Name). Proceeds will be used at the auction to be held on (Date of Auction).

www.gforceauction.com Check our web site for details.

Coming Auctions

KISSIMMEE AUCTION CO. www.kissimmeeauction.com Phone: 800-782-4506 • Spartan, SC Thurs., December 2, 2010 For: Construction and Forestry Equipment, Heavy Trucks and Trailers

Lots more items listed online!

877.631.0650

Terms of Sale: Complete Payment on Sale Day with CASH or CASHIER’S CHECK. Company or personal checks accepted only if accompanied by a current bank letter of guaranteed payment. Visa, MasterCard, Discover, American Express accepted - a 5% administrative fee will be charged on all non-cash/non-check purchases. A 10% buyer’s premium will be charged on each item under $2,000.

FLEMING & COMPANY, LLC www.flemingauction.com Phone: 904-886-9200 ONLINE AUCTION • Tues., December 7, 2010 For: Heavy Equipment Auction

1 ½” pump; (2) Homelute 4” trash pumps; Honda MK 9000 concrete saw; Tap Drill Machine, s/n 08414; Pipe Test Pump; Briggs Test Pump; Berger 200 Transit; 7’ Rake w/3pt hitch; 6’ Rake w/3pt hitch; Lawn Rake w/3pt hitch; Rugar 2 ton engine lift; Red 2 ton jack; Jack hammer; Post hole digger Massey Ferguson; 3 pt hitch post hole digger; Shop fan DBS 4223; Craftsman drill press; Craftsman bench grinder; Wilton 8” vise; Wilton 6” vise; Snap On 50 ton press; Dewalt cut off saw; Wheel lift; OTC engine stand; Safety Kleen parts washer; HD transmission jack; Pneumatic floor jack; 2 wheel hand truck; Napa portable air tank; Battery charger; WAP 10 gallon vacuum; 8’ fiberglass step ladder;

• Carroll, OH Fri., December 10, 2010 For: Inventory of New & Used Demolition Related Heavy Equipment • Long Island, NY Fri., December 17, 2010 For: Excavating Equipment, Trucks, Containers and Trailers

RITCHASON AUCTIONEERS INC. www.ritchason.com Phone: 800-806-3395 • Lebanon, TN Sat., December 18, 2010 RYAN AUCTION SALES www.ryanauctionsales.com Phone: 603-491-6159 • Sat., Nov. 27, 2010 @10:00 am Virtual Equipment & Truck Auction • Tues., Nov. 30, 2010 @10:00 am Virtual Equipment & Truck Auction • Thurs., Dec. 16, 2010 @10:00 am Virtual Equipment & Truck Auction

STEFFES AUCTIONEERS INC. www.steffesauctioneers.com Phone: 701-237-9173 • West Fargo, ND Wed., December 1, 2010 For: AGIRON 56 Construction Auction STOCK AUCTION COMPANY www.stockra.com Phone: 800-937-3558 • Casper, WY Thurs., December 2, 2010 For: John Deere Farm Equipment • TIMED INTERNET ONLY AUCTION Wed., December 8, 2010 www.bigiron.com • Columbus, NE Thurs., December 9, 2010 For: Behlen Mfg. Co. Winter Auction • TIMED INTERNET ONLY AUCTION Wed., December 22, 2010 www.bigiron.com TAMPA MACHINERY AUCTION, INC. www.tmauction.com Phone: 813-986-2485 • Tampa, FL Sat., December 11, 2010 UTILITY AUCTIONS www.utilityauctions.net Phone: 302-530-9103 • Wilmington, DE Fri., December 17, 2010 For: Construction and Utility Equipment

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com Phone: 760-731-7760 • Perris, CA Thurs., December 2, 2010 For: Heavy Construction Equipment

WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com Phone: 800-443-9580 • Frederick, MD Thurs.-Fri., December 9-10, 2010 For: Construction Equipment • Buckeystown, MD Sat., December 11, 2010 For: Construction Equipment

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com Phone: 419-865-3990 • Kissimmee, FL February 7-14, 2011 For: Construction Equipment, Trucks and Trailers

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 123

SPECIAL AUCTION 2 MAJOR JOB COMPLETIONS!

RENTAL RETURNS CONSTRUCTION, SUPPORT, ATTACHMENTS, TRUCKS & TRAILERS.

Cuba Timber & Carroll Custom Logging

NEFF RENTALS RSC

SATURDAY, DECEMBER 11 @ 9:30 AM TUSCALOOSA, ALABAMA

WEDNESDAY, DECEMBER 15 @ 9:30 A.M. KISSIMMEE, (WINTER GARDEN) FLORIDA

LOGGING & LIKE NEW WESTERN STAR TRUCK TRACTORS!

VERY LATE MODEL TRUCK TRACTORS, LOGGING & CONSTRUCTION, SUPPORT EQUIPMENT

DIRECTIONS: From Birmingham Airport: take Interstate 20 & 59 West to exit 68, go 3 miles to 1st traffic light take left (south) on Hwy. 11 & 43. Sale site 3 miles on right. Adjacent to Black Warrior Equipment. Address: 7110 Black Warrior Road, Tuscaloosa, AL 35401.

NOTE: Cuba Timber, having completed several large jobs and having purchased equipment for these jobs have finished & completed them 100% and will sell the equipment and trucks that were used on these jobs and purchased new. Selling same time will be one large, finished in full timber job from Carroll Custom Logging.

JACK’S NOTE: This sale will definitely be the largest and latest model forestry sale of the year, plus the greatest line up of like new day cab truck tractors.

HILITES: 11 LOG SKIDDERS: 2006 JD 848G, (4) 2008 JD 648H, (2) JD 648G-III, 2008 JD 648G, 2003 Timberjack 460D, Cat 535, 5 FELLER BUNCHERS: (3) 2008 JD 843J/ FD 22 Saw head (Like New), 2006 Hydro Ax 670, Timbco 425C (tracked), 5 LOG LOADERS: 2009 Barko 295ML Magnum, (3) 2008 JD 437C/ CSI Delimber (like new!), Cat 539, 2 ROCK JAW CRUSHERS: 2006 Kolberg Pioneer FT2640, Trio 24x36, MULCHING MACHINES: 2006 Gyrotrac GT25 w/ NH700 Grinding Head, ARTICULATED HAUL TRUCKS: Volvo A25, 5 HYDRAULIC EXCAVATORS: 2006 Cat 320CL, 2007 Cat 315CL, 2005 JD 200CLC/ HultdinsGrapple/ Saw, 2008 Terex TXC225LC-2, Volvo EC210CL, 2 RUBBER TIRED EXCAVATOR: Cat 920, Badger 460, 2 MOTOR GRADERS: 2005 JD 672D, 2008 Sany PQ160, 6 CRAWLER TRACTORS: (3) 2008 JD 700LGP (winch), JD 650J, JD 450G, 2 TRACTOR LOADER BACKHOES: Cat 416 (4x4), JD 710D, ASPHALT PAVER: LeeBoy 8500, 2 VIBRATORY ROLLERS: Cat CP5653C, IR SD70F, TRENCH ROLLERS: Dynapac LP8500, 3 TELESCOPIC FORKLIFTS: Cat TH63, 2008 Genie GTH5519, 2008 Genie GTH844, PIGGY BACK FORKLIFTS: Princeton D550, 2 AIR COMPRESSORS: 2003 IR 185CFM, IR 185CFM, DRILLING EQUIPMENT: Ditch Witch JT4020, LANDSCAPE EQUIPMENT: Broyhill 210 Accupro Sprayer, JD Aercore 800, Salsco Greens Roller, 2 LOADER LANDSCAPE TRACTORS: Kubota 105XDC (4x4), Kubota BX2230 (4x4), UTILITY TRACTORS: Kubota 2500 (4x4), 2 AG TRACTORS: 2007 Montana 6848 (4x4), JD 7700, PULL PAN: Dirt Pan, STRAW BLOWER: Finn B70, 2 WOOD CHIPPERS: 2006 Rayco RC20XP, Vermeer BC1400, SWEEPER: Broce RJ350, 17 TRUCK TRACTORS: (12) 2011 Western Star 4900EX (t/a, 505hp, 46 rears, load reading scale system, 2 year warranty, 25,000-50,000 miles, DayCab, Virtually New!), 1998 IH (Day Cab), 2007 Freightliner FL3 (t/a), (2) 2005 Freightliner FLD, 2005 Peterbilt 379 (t/a), 2 DUMP TRUCKS: 2006 Western Star (t/a), 1998 Chevy (s/a),

FLATBED DUMP TRUCKS: 1991 IHC 4900 (s/a), 5 SERVICE TRUCKS: 2008 Kenworth T300 (Maintainer Body/ Crane, s/a), 1999 Ford F450, 1999 Ford F350, 1997 Chevy 2500, 1993 IHC 4700, 2 SERVICE BODIES: Knapheide Service Body, Rugby Service Body, 2 DETACHABLE & EQUIPMENT TRAILERS: 2008 Magnolia (tri., 10ft. width), 2007 Pitts (35T), EQUIPMENT TRAILERS: 2008 Landoll (35T), 2 TAGALONG TRAILERS: 2001 Trailboss P131DTA (t/a), 1994 Interstate 20DTA, Tandem axle Trailer w/ fuel tankair compressor-hose reel, UTILITY TRAILER: LoadTrail (t/a),4 DUMP TRAILERS: 1996-1993 Palmer TA24H (t/a), 1996 Allison 24ft., 1970 Shop Built 28ft. (t/a), 2 VAN TRAILERS: (2) 1970 (t/a) loaded w/ asst. sizes numerous culverts to sell separately, 12 LOG TRAILERS: 2007-(2) 2005 Savannah 4 Bolster (t/a), (10) 2008-2003 Pitts & Blonde 4 Bolster, (2) Shop Built 4 Bolster (t/a), 2 UNUSED GULF STREAM CAVALIER, CONTAINERS: 20ft. Storage, 2 STONE BOXES: (2) Gravel Box, 9 FUEL TANKS: 8000 gal. – 6000 gal. w/ OPW K800 Fuel Management System, 2000 gal. – 500 gal. Skid Mounted, (2) Skid Mounted, (2) Square Fuel Tanks, Tank w/ IR Compressor (t/a), RECREATIONAL/ UTILITY VEHICLES: 2009 Polaris 700 (4x4), 2008 Bad Boy Buggy (4x4), Approximately 95 Club Cars Coming: 2008-(16) 2007 – (7) 2006-(25) 2005 Club Car (electric w/charger), (2) 2009 Club Car XRT950 (4x4, gas w/ dump bed), 2009 Club Car XRT900, 2008 Club Car XRT800, 2005 Club Car CARRYALL, JD HPX Gator, PLUS MUCH MORE WELDERS, LIGHT PLANTS, ATTACHMENTS: Excavators: CP 18in.

Bucket, Quick Attach Forks, Quick Attach Root Grapple Bucket, Hensley bucket to fit Komatsu PC300, Crawler Tractors: Rebuilt D6T Straight Blade, V Blade for Cat D7, Backhoes: Cat 15in. – 20in. Bucket, Tractors: Dragon 6ft. Box Blade, Rome Plow, Hammerback 10ft. Land Leveler, Skid Steers: Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Frames, 3500-4800-5600 Thumbs, Excalibur Thumbs, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets , SUPPORT EQUIPMENT: Hudson Ground Saws, Offset Disk, Finn Straw Blower, Skidder Tire Chains.

For more info.: contact Mark White @ (205) 454-4646.

ALABAMA AUCTIONEER LICENSE: #1394, Jack Lyon, Auctioneer: Mark White AL#1808

DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt. 192E for 1 mile.

Left on Avalon Rd. for 3 miles to sale site on left. From Orlando: I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site. Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787.

NOTE: Selling will be construction, support equipment, trucks & trailers from several large Florida rental fleets including Neff Rentals and RSC. HILITES: 11 CRAWLER TRACTORS: Cat D8R, 2007 Cat D5GLGP, 2006 Cat D5GLGP, Cat D5HLGP, Cat D3CXL-III, 2005 JD 750JLGP, (2) 2004 JD 650H, 2004 JD 450HLGP, Komatsu D155AX-5, 10 HYDRAULIC EXCAVATORS: 2006 Cat 330DL, 2006 Cat 325DL, 2006-2005 Cat 320CL, Komatsu PC450LC-6KJ, Komatsu PC220LC, Kobelco SK300LC, IR ZX125, PULL BEHIND SCRAPER: Michigan 24yd., TOOL CARRIERS: Cat IT18, CRAWLER LOADERS: Cat 953, 6 TRACTOR LOADER BACKHOES: 2005 Cat 420D (4x4), 2006 Case 580 Super M-II (4x4), Case 580M (4x4), JD 710C (4x4), 2004 JCB 214E (4x4), ASPHALT ROLLERS: 2006 IR DD118HF, 3 VIBRATORY ROLLERS: 2006 IR SD116F, IR SD100, 2006 IR SD70F, LANDFILL COMPACTORS: Rex 355B, SKID STEERS: 2006 Cat 242B, 5 TELESCOPIC FORKLIFTS: 2005 JLG 6036 Legacy Series, 2005 Terex TH636C, 2004 Gehl RS8, Lull 844C-42, Traverse 8040, ROUGH TERRAIN FORKLIFTS: Taylor TYEB-160S, 4 FORKLIFTS: 2006 Toyota 7FGCU25, Toyota 7FGCU25, Cat DP40, Nissan 45D, 10 SCISSOR LIFTS: 2004-(6) 2003 Genie GS1930, 2007 Genie Sl1930, 2003 JLG 1923E2, AIR COMPRESSORS: 2003 Sullivan D210Q, 5 GENERATORS: Atlas Copco QAS108, (3) 2004 Magnum MMG35, New Whiteman 2500BW, 2 WELDERS: 2007 Multiquip SGW250SS, Miller 302P, 2 LIGHT PLANTS: 2006 Terex RL4000, 2003 Amida AL4000, UTILITY TRACTORS: David Brown 1200, WOOD CHIPPERS: 2003 Vermeer BC625A, 3 STUMP GRINDERS: (3) 2003 Vermeer SC130, WATER TRUCKS & WATER WAGONS: 1985 Dodge 800 (t/a), DUMP TRUCKS: 2001 Int’l. (s/a), SERVICE TRUCKS: 1999 F550XL Super Duty, 3 DETACHABLE GOOSENECK TRAILERS: (2) 2011 Witzco 50T (tri.), 2011 Witzco 35T (t/a), ATTACHMENTS: Skid Steers: New 2010 Super Cut Asphalt Cutters, Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Frames, 3500-4800-5600 Thumbs, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets, Excavators: New 2010 Grizzly HT1035 Universal Thumbs, New 2010 Grizzly MT2650 Universal Thumbs, SUPPORT EQUIPMENT: New Smartquip Plate Compactors, New Mustang Rammers, New Mustang CV3500 Concrete Vibrator, Submersible Pump, Pintle Hitches, Impact Wrenches, Water Pumps, Air Spray Guns, Chainsaws, Straps, Bottle Jacks, Battery Chargers, Winches, Sockets, Go Karts, Post Hole Diggers, Compressors, Hose Reels, Grinders, Weedeaters, Sandblasters, Grills, Tri-Balls, Generators, Wagons, Tricycles, Trailer Jacks, Welders, Tires, Heaters, Hoists, Lights, Scooters, Scaffolding, Pumps, Fuel Tanks, Concrete Saw, Universal Seats, Impact Wrenches, Chains, Binders.

FLORIDA AUCTIONEER LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091.

SALE SITE PHONE: (407) 239-2700, (770) 537-7386, FAX: (407) 239-0068.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 124 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Public Auction Construction and Utility Equipment

Earth & Turf’s 800 Lb. Capacity Clamp-on Forks Add Versatility

Friday, December 17th

@ 9:00 AM Auction Location: 601 Christiana Ave. Wilmington, DE 19801 Please call (302) 654-1846 or

Marty Piela @ (302) 530-9103 for more information Inspection on December 15th & 16th from 8am²5pm

Visit our website for a list of inventory & pictures

www.utilityauctions.net

Fleet vehicles from Delmarva Power, Con Edison, Orange & Rockland, South Jersey Gas, DE River & Bay Authority, City of Wilmington, New Castle County & others

To consign equipment to this auction please contact Marty Piela @ (302) 530-9103

Financing can be provided by Northern Atlantic Financial, LLC JoAnn Cucciarre: Office 800-710-4361 Cell 610-909-8023.

All financing must be pre-approved prior to the auction

ABSOLUTE AUCTION Complete Liquidation Dagostino Company, Inc. Wed., Dec. 15, 2010 – 9:00AM Hatfield, Pennsylvania (30 Miles North of Philadelphia)

Hydraulic Excavators and Attachments `99 HITACHI EX330 LC-5, s/n 1H1P020839 • `99 HITACHI EX160 LC-5, s/n 13KP001986 • `89 CAT 225B LC, s/n 2ZD01690 • Excavator Attachments: ALLIED 755 Hyd Demolition Hammer (Cat 225 or EX160) • ALLIED 2300 Hyd Plate Compactor (Cat 225 or CX160) • EX330 Buckets: 54”; 24” • EX160 Buckets: 42” • CAT 225 Buckets: 42”; 24” • Various Bucket Side Cutter Bits Tractor Loader Extend-A-Hoes and Attachments `02 CASE 580SM, 4x4 Extend-A-Hoe, s/n JJG0284765 • `99 CASE 590 Super L Series II, 4x4 Extend-A-Hoe, s/n JJG0211911 • `97 CASE 580L Extend-A-Hoe, s/n JJG0234154 • Backhoe Digging Buckets: CAT: 24”; 12” • CASE: 36”; 24”; 12” • Backhoe Attachments: ALLIED 730 Hydraulic Demolition Hammer (Case 590) • ALLIED 8700C Plate Compactor (Case 590) • Bolt-On Thumb Attachment • 12” Asphalt Cutter • Crawler Tractor and Miscellaneous Equipment Attachments `96 JOHN DEERE 450G LT Series IV Crawler Tractor, s/n T0450GH820180 • Misc Equipment Attachments: (2 Sets) ACS 72” Forks (Loader) • 60” Forks (Bar Mount) • (2 Sets) 48” Forks (Clamp On)

Earth & Turf LLC’s 800 lbs. (363 kg) capacity clamp-on forks are designed to give compact loaders additional versatility. The design of the forks makes them easy to install and to remove, according to the manufacturer. No bucket alterations are necessary and they will not damage buckets, if properly installed. The tine length is 32 in. (81 cm) and they weigh 70 lbs. (31.7 kg). For more information, call 888/6932638 or visit www.earthandturf.com.

Call (800) 233-6898 Email sales@hunyady.com For Complete, Descriptive Brochure!

www.hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Skid Steer Loaders and Attachments `02 CASE 70XT, s/n JAF0351149 • `99 CASE 1845C, Hi-Flow, s/n JAF0276351 • Skid Steer Attachments: ALLIED 715 Hydraulic Demolition Hammer • GEHL 16” Cold Planer • PREPARATOR 72” Soil Conditioner • (2) FFC 72” Broom Attachments • (2) GUEST 41”-72” Utility Trench Paver Mobile Broom, Crawler Paver, and Compaction Equipment `06 LAYMOR 8HC Mobile Broom, s/n 31191 • `96 MAULDEN 550E Crawler Paver, s/n 559604-112 • `96 CAT CB224C Tandem Vibratory Roller, s/n 3AL00592 • `01 RAMMAX P-33/24 Trench Compactor, s/n 332528 • `00 RAMMAX P-33/24 Trench Compactor, s/n 330739 • Spare 24” and 33” Padfoot Wheels Dump, Utility, Flatbed, and Pickup Trucks `97 MACK RD688S TriAxle Dump, Mack E7-350, 350HP dsl Bibeau 17’6” heated steel dump body • `98 GMC C6500 S/A Dump • `03 GMC 2500HD Utility Truck • `00 GMC 3500HD Utility Truck • `98 GMC 3500SLE Flatbed Truck • `99 GMC 2500 SLT, 4x4 Extended Cab Pickup • `99 FORD F-250 XLT, 4x4 Pickup Truck • `00 GMC 2500 SL Pickup

Tag-A-Long Trailers `06 EAGER BEAVER 20XPT, 20 Ton T/A • `98 EAGER BEAVER AP10, 5 Ton T/A • `85 INTERSTATE 18BST, 9 Ton Tri-Axle • `03 PREMIER T/A Landscape Trailer Portable Pump, Air Compressors, Straw Blower, and Arrowboards GORMAN RUPP Prime Aire 6x6 Portable Pump • `01 IR 185CFM • `95 IR 175CFM • Skid Mounted Straw Blower • `01 SOLAR TECH AB0715-D Portable Arrowboard • PROTECT-OFLASH Portable Arrowboard Sewer and Water Tools POWERRAM 1425 Trenchless Hydraulic Rod Pusher/Puller • Underground Piercing Tool • MUELLER Pipe Taps • Hydrostatic and Vacuum Test Pumps • Pipe Lasers • CHERNE Inflatable Test Plugs, Pipe Plugs, and Mandrels • Pipe Cutters, Lifters, and Locators • Copper Crimping Tools • valves, Fittings, and Accessories PLUS: Trench Boxes, Hydraulic Shoring, and Road Plate • Concrete Forms • TARGET Concrete Saw • Cutoff Saws • Trash Pumps • Submersible Pumps • Foot and Plate Compactors • Survey Instruments • Fuel Tanks • Traffic Control Signage, Cones, and Barrels • Chains and Rigging • Shop Tools and Equipment.

Doosan Names F&W Equipment Dealer for Western Connecticut F&W Equipment Corporation has been appointed a distributor of Doosan heavy excavators, wheeled excavators and wheel loaders in western Connecticut.

“We are pleased to add Doosan to our product offerings,” said Steve Funk, sales manager of F&W Equipment. “We believe Doosan offers reliable, high-quality equipment at competitive prices along with superior product support.”

Located at 164 Boston Post Road in Orange, Conn., F&W Equipment is a member of the Association of Equipment Distributors and is currently celebrating its 70th year in business.

In addition to Steve Funk, other key personnel include Sue Bendez, service manager, and Jim Funk, rental and parts manager.

For more information, call 203/795-0591 or visit www.fwequip.com.

Visit CEG’s Web Site at www.construction equipmentguide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 125

MAJOR TRUCK RENTALS – RENTALS – RENTALS! TRACTOR & CONSTRUCTION, SUPPORT EQUIPMENT, DUMP TRAILER, ATTACHMENTS, AERIALS, TRUCK TRACTORS, CONSTRUCTION DUMP TRUCKS, TRAILERS EQUIPMENT SATURDAY, DECEMBER 18 @ 9:30 AM ATLANTIC CITY, NEW JERSEY REDUCTION (ATLANTIC CITY RACE TRACK) AUCTION DIRECTIONS: Take Atlantic City Expressway to Exit 14 5600 Thumbs, Stump Buckets, Quick Attach Plates, Snow THURSDAY, DECEMBER 16 @ 10:00 AM SAGINAW, MICHIGAN HILITES: THIS SALE WILL FEATURE: TUB GRINDER: Morbark 950, 30 TRUCK TRACTORS: (10) 2007 PETERBILT MICHIGAN SPECIALS: (6) 2000 – (2) 2002 & (2) 2005 PETERBILT MICHIGAN SPECIALS (TRACTORS), 9 MACK MICHIGAN SPECIALS, 20 SETS OF GRAVEL TRAINS, TRAIL KING 50 TON LOWBOY, CONSTRUCTION & SUPPORT EQUIPMENT, ATTACHMENTS: Skid Steers: New 2010 Super Cut Asphalt Cutters, Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Frames, 3500-4800-5600 Thumbs, Stump Buckets, Quick Attach Plates, Snow & Mulch Buckets. * DUE TO THE RECENT UPSWING IN THE TRANSPORTATION & CONSTRUCTION EQUIPMENT MARKETS WE WILL BE ACCEPTING QUALITY CONSIGNMENTS ON A LIMITED BASIS. WE OFFER FAST PAYOUTS. DONT MISS YOUR CHANCE AT THE YEAR END BUYERS. FOR MORE INFO CONTACT CHARLIE COOK 248-388-0918

(Leipzig Ave) and follow signs to Atlantic City Race Track.

Address: 4501 Leipzig Ave, Mays Landing, NJ 08330.

NOTE: Selling will be year end rental fleet equipment from several national rental fleets both large and small.

HILITES: ARTICULATED HAUL TRUCKS: Komatsu HA270, 4 HYDRAULIC EXCAVATORS: Cat 325CL, Cat 320CL, 2005 Hitachi ZAXIS200, JCB 330LC, 2 RUBBER TIRED LOADERS: Cat 980G, 2001 Cat 930, CRAWLER TRACTORS: (2) Cat D5G, 7 TRACTOR LOADER BACKHOES: Cat 420D, (2) Case 580K (4x4), Case 580E (4x4), 2008 Terex TX760B (4x4), 2005 Terex TX760 (4x4), Ford 655A (4x4), SKID STEERS: 2007 Gehl 4640, 5 SCISSOR LIFTS: (3) 2002 Skyjack 3220, Skyjack 3220, MEC 2034, BOOM LIFTS: 2001 Genie Z30/20N, AIR COMPRESSORS: Schramm 160CFM, 4 GENERATORS: 600kw Rolls Royce Genset, (2) New 2010 Gentec 950W portable, New Whiteman 2500BW, DUMP TRUCKS: 2000 Mack RD688S (tri.), 3 TRUCK TRACTORS: (3) 2005 Peterbilt 379 Lowboy Tractors(t/a), GARBAGE TRUCKS: 1995 Peterbilt (t/a), SERVICE TRUCKS: 1999 Ford F450, UTILITY VEHICLES: 150cc Limited Edition, 4 DETACHABLE GOOSENECK TRAILERS: (2) 2011 Witzco RG50 (tri.), 2011 Witzco RG35 (t/a), Fontaine 35 ton (t/a), BEAM TRAILERS: 1985 Talbert 20ft. (quad.), DROP DECK TRAILERS: 2003 Transcraft DTL2100 (t/a), 2 DUMP TRAILERS: Fruehauf 45ft. (t/a), Parker 26ft. (t/a), TAGALONG TRAILER: Econoline MP1223DE 12 ton (t/a), SEA CONTAINER: 8ft. x 8ft. x 20ft., ATTACHMENTS: Skid Steers: New 2010 Super Cut Asphalt Cutters, Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Root Grapple, Tree Boom, Backhoe, Frames, 3500-4800-

& Mulch Buckets, New 2010 Super Cut Asphalt Cutters, Excavators: New 2010 Grizzly HT1035 Universal Thumbs, New 2010 Grizzly MT2650 Universal Thumbs, Crawlers: 9ft. Root Rake, SURVEY EQUIPMENT: (3) New 2009 Geotop GT4 20X Transit Level, (2) New 2009 Geotop GL5 laser Level, (3) New 2009 Geotop G20E 20X Laser Levels, SUPPORT EQUIPMENT: (2) 11.00R20 Tires, Keyes Entry Set, Multi Use Scaffolding, Wagon heaters, New Smartquip Plate Compactors, New Mustang Rammers, New Mustang CV3500 Concrete Vibrator, Submersible Pump, Pintle Hitches, Impact Wrenches, Water Pumps, Air Spray Guns, Chainsaws, Straps, Bottle Jacks, Battery Chargers, Winches, Sockets, Go Karts, Post Hole Diggers, Compressors, Hose Reels, Grinders, Weedeaters, Sandblasters, Grills, Tri-Balls, Generators, Wagons, Tricycles, Trailer Jacks, Welders, Tires, Heaters, Hoists, Lights, Scooters, Scaffolding, Pumps, Fuel Tanks, Concrete Saw, Universal Seats, Impact Wrenches, Chains, Binders, New 2010 Gentec 3in. Water Pumps, New 2010 Gentec PC90-PC60 Plate Compactors (16) Plastic tool containers, (10) Makita-Dewalt-Milwaukee Sawzall, (10) Impact Wrenches, (10) 9in.-4in. Grinders, (10) 9in. & 4in.

Grinders, (10) 3/8in. Drills & Screw Guns, (6) Sets of Complete Torches-Gauges-Hoses, (6) Band Saws, (8) 1 ton Lug all Cable Winches, (6) 3/4in. Craftsman Socket Sets, (4) 1/2in. Craftsman Socket Sets, (6) Large end Craftsman Wrench Sets, (6) Standard End Craftsman Wrench Sets, (3) Hobart Welder/Generators, (3) IR 5.5hp Air Compressors, (6) 90in. x 12in. Alum. Weatherguard Boxes, (2) 60in.

Weatherguard Cross Boxes, (2) 3ft.x 3ft. x6ft. Gang Boxes, (4) 2ft. x 2ft. x 5ft. Gang Boxes, (60) 2x4 -2x6 – 2x8 – sx12 Nylon Chokers, (48) 5/8 x 3/4 Clevis.

SALE SITE PHONE: (609) 272-9702 or (609) 272-9703, (863) 660-4811.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com

The Complete Auction And Appraisal Service

ALEX LY

N & SON

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 126 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX A E D ....................................................................................36

EQUIPMENT MART OF NEW YORK ................................29

PENN JERSEY MACHINERY ..............................................5

AIM ATTACHMENTS ..........................................................36

ESCO CORP ....................................................................104

PETERSON PACIFIC CORP ..............................................89

ALBAN CAT ......................................................................107

FLUID CONTROL SERVICES ............................................33

PETROWSKY AUCTIONEERS INC

ALBAN TRACTOR CO INC ..................................................6

FLUID POWER ..................................................................104

PLAINVILLE CT 12/03/10 ..........................................115

ALDEN TRUCK LTD ............................................................30

FOLEY INC ............................................................................9

PINE BUSH EQUIPMENT CO ............................................17

ALEX LYON & SON INC

GEHL PAVER ......................................................................56

PLASTERER EQUIPMENT CO INC ..................................10

GLOBAL FORCE AUCTION GROUP

PRO-TECH MANUFACTURING ........................................49

PLAN AHEAD CALENDER ........................................113 LEXINGTON KY 12/03, PINE BLUFF AR 12/09 ........117

SMYRNA DE 12/11/10 ................................................122

RANSOME CAT ......................................................2,16,40,46

TUSCALOOSA AL 12/11, KISSIMMEE FL 12/15 ......123

GOMACO CORP ................................................................62

RITCHIE BROS AUCTIONEERS ......................................128

SAGINAW MI 12/16, ATLANTIC CITY NJ 12/18........125

GROVE WORLDWIDE (CRANE) ......................................95

ROAD BUILDERS MACHINERY ........................................25

ALEX PARIS CONTRACTING CO INC ..............................23

HALE TRAILER BRAKE & WHEEL ....................................19

ROADTEC ............................................................................57

ALL ISLAND EQUIPMENT CORP ........................................7

HARTER EQUIPMENT ........................................................12

ALLIED CONSTRUCTION PRODUCTS ..........................103

HOOBER INC ......................................................................42

ROSCO MFG CO ................................................................58

AMERICAN RENTAL EQUIPMENT ....................................25

HUNYADY AUCTION CO

ARTIC SNOW & ICE CONTROL PRODUCTS ..................97

HATFIELD PA 12/15/10 ..............................................124

ASPHALT CARE EQUIPMENT ..........................................52

HYUNDAI CONSTRUCTION EQUIPMENT ....................101

BAGELA USA ......................................................................62

IRON PLANET

BARGAINS ........................................................................106

ONLINE AUCTION 12/09/10 ......................................121

BEST LINE EQUIPMENT ....................................................31

JCB INC ..............................................................................83

BINDER MACHINERY CO ....................................................3

JERRE MARTIN REPAIR ....................................................47

BOBCAT COMPANY ..........................................................64

JESCO ................................................................................21

BODINE MFG ......................................................................33

JFW EQUIPMENT INC ........................................................52

BROOKSIDE EQUIPMENT SALES INC ............................41

JM WOOD AUCTION

ROYAL TRUCK & EQUIPMENT ........................................46 RSC EQUIPMENT RENTAL ................................................32 RUDD EQUIPMENT CO ....................................................40 S R INDUSTRIES ................................................................16 SAKAI AMERICA INC ........................................................51 SPECIALTY RENTALS & ATTACHMENTS ........................35 STEPHENSON EQUIPMENT ............................................11 STOLTZFUS MFG ..............................................................42 STONE CONSTRUCTION EQUIPMENT INC ....................56 STU HARRIS ......................................................................111 T-QUIP SALES & RENTAL INC ................................36,39,44

CAPITAL TRACTOR INC ....................................................42

MONTGOMERY AL 12/02/10......................................114

CEG SCALE MODELS ........................................................74

JOHN DEERE ......................................................................69

CHADWICK-BAROSS ........................................................13

JOHN DEERE SKID STEER ..............................................91

CHENANGO TRUCK ..........................................................39

JOSEPH EQUIPMENT COMPANY LLC ............................45

CLASSIFIEDS ....................................................................108

K W REESE INC ................................................................34

CLEVELAND BROTHERS EQUIPMENT CO......................26

KEIL EQUIPMENT CO INC ................................................33

CONSTRUCTION EQUIPMENT GUIDE ............................90

KING OF PRUSSIA EQUIPMENT CORP ..........................22

CONTRACTORS SALES CO INC ......................................32

KMP USA LTD ..................................................................105

COSTANZI CRANE & RIGGING CO INC............................42

KOMATSU AMERICA CORP ..............................................99

CRAIG MANUFACTURING LTD ......................................107

KUBOTA ..............................................................................85

CRANE MATS NORTHEAST ..............................................36

LASER-GRADER MFG ......................................................71

CREAN EQUIPMENT ........................................................104

LBX ......................................................................................81

VANTAGE EQUIPMENT ......................................................15

DANELLA USED TRUCKS & EQUIPMENT........................33

LEEBOY ..............................................................................60

VOLVO COMPACTION ......................................................63

DAVID MALTZ AUCTIONS

LUCKY’S TRAILER SALES ................................................54

WALSH EQUIPMENT ..........................................................44

M G EQUIPMENT ................................................................40

WANTED ............................................................................111

MACHINERY SERVICES INC ............................................71

WESTCHESTER TRACTOR INC ......................................22

AUCTION 12/4/10 ......................................................116

MAULDIN PAVING PRODUCTS ........................................55

WIRTGEN AMERICA ..........................................................61

DOOSAN INFRACORE AMERICA ....................................79

MESSICK’S ..........................................................................43

WOLFE INDUSTRIAL AUCTIONS

DYNAPAC ............................................................................53

METSO MINERALS SCREENING ....................................87

AUCTION FREDERICK MD 12/09/10 ........................119

EAGLE POWER & EQUIPMENT CORP ..........................127

MIKE ZYNDORF LLC ..........................................................30

WOODS CRW CORP ..........................................................20

ELLIOTT & FRANTZ INC ................................................6,48

NEW MILLENNIUM RENTALS ..........................................34

YANMAR AMERICA ............................................................77

EMPIRE CRANE CO ..........................................................37

NPK CONSTRUCTION EQUIPMENT INC ........................75

ZANETIS POWER ATTACHMENTS ..................................59

EOP ....................................................................................107

OPDYKE INC ......................................................................30

ZM INDUSTRIES ................................................................34

NEW ROCHELLE NY 12/7 ........................................118 DAVIS AUCTIONS INC

TAKEUCHI ..........................................................................72 TEREX COMPACT ..............................................................93 TEREX LOADER BACKHOES ..........................................94 TEREX TRUCKS ................................................................88 TOMCON INDUSTRIES INC ..............................................43 TRACEY ROAD EQUIPMENT INC ....................................25 TRANSPORT EQUIPMENT SALES ..................................49 TRENCH SHORING SERVICES ........................................39 UTILITY AUCTIONS INC WILMINGTON DE 12/17/10........................................124

The Advertisers Index is printed as a free editorial service to our advertisers and readership.

Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 24, 2010 • Page 127

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Case CX210B with Rubber Tracks

RECENT TRADES

2008 Kubota L39 Loader Backhoe, Stk# 32136........$33,000

1987 Koerhing 6620 Excavator, Stk# 32345, 4449 Hrs ............ ..............................................................................................$19,500

2005 Ingersoll Rand ZX075 Excavator, Stk# 32038................ ..............................................................................................$35,800

2001 Case 580SM Loader Backhoe, Stk# 32202, 5730 Hrs .... ................................................................................................$30,000

2003 Case 60XT Skid Steer, Stk# 32250, 1113 Hrs ....$17,200

2005 Case 621D Wheel Loader, Stk# 32295, 16,633 Hrs ..$65,500

Authorized Dealer for These Quality Lines: Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Sims Cabs & Cab Enclosures • Guest Industries Forks • Airman Portable Air Compressors • Zanetis Planers • Trailking Trailers • FFC Attachments

Frank Beck

S. Montgomery Co.

215/870-4546

Pat DiCicco

Phila Co. & Bucks Co.

215/680-9203

Jim Lutz

Bucks & N. Montgomery Counties

215/870-8567

Tom Scott S. Chester Co., Cecil County, MD, New Castle Co., DE

Richard Verna

Delaware Co. & S. Chester Co.

302/530-9134

610/420-4770

Dean R. Leonetti, Sales Manager • 215/699-5871

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 N E W H O U R S Mon.-Fri. 7AM-5:30PM

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 N E W H O U R S Mon.-Fri. 7AM-5PM

Rodney Bush

Skid Steer/Trencher Specialist Delaware Co., S. Chester Co., New Castle Co. DE, Cecil Co. MD

302/354-1947

Dean J. Leonetti

Skid Steer/Trencher Specialist Philadelphia Co., S. Montgomery Co., Bucks Co. & N. Chester Co.

215/783-1847

55 Senn Drive Eagle, PA 610/458-7054 Fax 610/458-7094 N E W H O U R S Mon.-Fri. 7:30AM-4PM

Page 128 • November 24, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

UNRESERVED PUBLIC AUCTION

Statesville

North Carolina

UNRESERVED PUBLIC AUCTION

North East Maryland

17 — TRUCK TRACTORS

CAT 120H

2005 PETERBILT 379

1 OF 2– 2005 JOHN DEERE 650J LGP

2004 CAT 318C LN

Tuesday, December 7, 2010 8:00 am

Tuesday, December 14, 2010 8:00 am

Auction Site: 2718 Salisbury Highway, Statesville, NC 28677 Fax: 704.873.3394

Auction Site: 3201 West Pulaski Highway, North East, MD Fax: 410.287.4332

Auction Firm License #6980. Motor Vehicle Dealer License #0061711

000.000.0000 704.873.6633

CALL FOR A FREE BROCHURE

For equipment listings and photographs, visit our web site at rbauction.com

000.000.0000 000.

000.0000 410.287.4330

CALL FOR A FREE BROCHURE