Issuu

Toebe Takes Lead On $205M Michigan Project

place in a heavily trafficked area that traverses the state capitol in Lansing to the west and Michigan State University in East Lansing to the east.

between Interstates 496 and 69 is taking

“It’s a major commuter route for everybody that goes anywhere north/south,” said Chris

Gemble, Michigan Department of Transportation (MDOT) assistant construction engineer. “If they’re coming down to Jackson or perhaps traveling somewhere in Detroit, they’re probably going to come through the area if they’re up in

see MDOT page 52

By Lucy Perry CEG CORRESPONDENT

In July, the White House announced its action plan for winning the global AI race. Innovation, infrastructure and international diplomacy are named pillars of the administration’s plan to push AI development and deployment.

Near-term goals are set and implementation actions are recommended.

and pre-construction. Under its pillar to accelerate AI innovation, the Trump administration calls for reduced red tape and onerous regulation, among many other changes in policy.

By Lori Tobias CEG CORRESPONDENT

DOT photo

8 OFFICIALS INTRODUCE LARGEST PROGRAM IN ILLINOIS’ STATE HISTORY

Gov. JB Pritzker and IDOT joined state and local leaders, labor and transportation stakeholders to announce the largest multi-year program to build and repair infrastructure in state history: $50.6 billion over six years.

10 STONE PRODUCTS WELCOMES CUSTOMERS TO OPEN HOUSE

Stone Products Inc. welcomed customers, partners and community members to its Customer Appreciation Open House on Sept. 26, offering a day filled with hospitality, networking and exclusive promotions.

14 BOBCAT OF ST. LOUIS HOSTS CUSTOMER APPRECIATION EVENT

Bobcat of St. Louis hosted an open house customer appreciation event at its facility in Valley Park, Mo., on Oct. 9, 2025. The event included a chance to meet the local Bobcat team, equipment displays and new machines and attachments.

16 UTILITY EXPO 2025 DRAWS RECORD CROWD IN KENTUCKY

The Utility Expo shattered attendance records as more than 22,600 utility construction and infrastructure professionals from all 50 states and 59 countries gathered at the Kentucky Exposition Center, Oct. 7-9, 2025.

18 LIPPMANN, MAVERICK ENVIRONMENTAL EXPAND PARTNERSHIP

Lippmann, a manufacturer of crushing, screening and stacking equipment, has expanded its partnership with Maverick Environmental Equipment, providing full dealer coverage into Michigan and Ohio.

24 KENTUCKY AWARDS $7.75M FUNDING FOR LOCAL BRIDGE PROJECTS

Gov. Andy Beshear announced the latest round of funding recipients from the County and City Bridge Improvement Program on Oct. 2, awarding $7.75 million for 17 critical bridge projects across 13 Kentucky counties and three cities.

INDUSTRIAL TRACTOR PARTS TOUTS NEARLY 70 YEARS OF BUSINESS

Founded in December 1956, Industrial Tractor Parts (ITP) can trace its roots to Cesar Mevorah, who emigrated from Bulgaria to the United States in the 1940s. In Europe, he had developed expertise in tractor parts.

THIS ISSUE

MIDWEST EDITION

34 CAT HOLDS REGIONAL FINALS FOR GLOBAL OPERATOR

CHALLENGE

Operators from across the U.S. and Canada gathered Sept. 23 and 25 for the start of the 2025 North American Regional Finals of Caterpillar’s Global Operator Challenge (GOC).

38 NDDOT ACADEMY MARKS 20 YEARS OF EXCELLENCE IN TRAINING

The North Dakota Department of Transportation (NDDOT) celebrated the 20th year of its Fall Transportation Technician Training Academy Oct. 6, 2025, at Camp Grafton located just south of Devils Lake.

46 MARTIN EQUIPMENT OPENS NEW FACILITY IN CEDAR RAPIDS, IOWA

Martin Equipment, a fourth-generation, family-owned John Deere Construction and Forestry dealer, has completed construction on its new facility in Cedar Rapids, Iowa. The expanded location officially opened Oct. 20, 2025.

48 BOBCAT INVESTS $4.8M TO RENOVATE BISMARCK, N.D., FACILITY

Bobcat completed a $4.8 million renovation of its Bismarck, N.D., manufacturing facility, furthering its commitment to invest in employees, operations and communities. The project modernized 22,560 sq. ft. of spaces across the facility.

82 WILKERSON CRANE RENTAL ACQUIRES JENSEN CRANE SERVICES

The purchase enables Wilkerson to expand its manpower, fleet and geographic footprint, providing clients in diversified markets with access to a broader range of equipment and services.

86 AVOID BEING BURIED WITH PRE-SEASON SNOW PREP CHECKLIST

76 NEXT GENERATION CAT D8 DOZER PROVIDES NEXT-LEVEL TECH

78 LIEBHERR EXPANDS DIGITAL INTEGRATION WITH UNICONTROL

DEVELON’S DD130 DOZER OFFERS CHOICE TO CUSTOMERS

Snow removal contractors know winter doesn’t give second chances. When the first storm hits, there’s no time to scramble for parts, tackle maintenance issues or hurry operator training. 74 CEG’S CRAWLER LOADER, DOZERS COMPARISON CHARTS

DEERE EXPANDS LINEUP WITH X-TIER, P-TIER ENHANCEMENTS

Cape Girardeau, MO

STK# KM2022307, 4628 HRS, Bridgeton,

KM2024119,

HRS, Franksville, WI 2020 Komatsu PC170LC-11 $139,500 stk# KM2024104 1404 hours, Slinger, WI

KOMATSU D37PX-23 $94,500 STK# KM2023250, 2204 HRS, Carterville, IL

2017 KOMATSU 931.2 $249,000 STK#VT2023001, 10,292 HRS, Escanaba, MI 2018 HAMM HD+140IVV $70,990 STK# HM18003, 1910 HRS, Carterville, IL

KOMATSU PC210LC-10 $134,500 STK# KM2023319, 3628 HRS, Eau Claire, WI 2020 KOMATSU PC210LC-11 $179,500 STK# KM2022040, 964 HRS, Eau Claire, WI 2022 KOMATSU WA475-10 $389,500 stk# KM2023313 1157 HRS, Columbia, MO

2023 KOMATSU HM400-5 $665,000 STK# DCcons, 1800 HRS, Cape Girardeau, MO

2018 HAMM HD10VO $25,555 STK# HM17083, 302 HRS, Bolingbrook, IL

2019 Komatsu PC170LC-11 $127,500 stk# ARCons 4040 hours, Carterville, IL

2021 VOLVO EC750EL $359,500 STK# VO2024002, 6329 HRS, Escanaba, MI

2021 Takeuchi TL12R2, S/N 412104134 2883 Hours, CAB/AIR/HEAT, TWO SPEED, HIGH FLOW HYDRAUICS, HYDRAULIC COUPLER, 84" GP BUCKET $44,900

2022 Case SV280B, 171 Hours, S/N JAFSV280HMM403668, CAB/AIR/HEAT, HYDRAULIC COUPLER, 72" GP BUCKET, 2 SPEED, RADIO, EXCELLENT CONDITION FULL MACHINE WARRANTY UNTIL 11-22-24 $47,000

Mike Garrard • (630) 492-9115 Bolingbrook, IL Contact us at Used@McCannOnline.com View our complete Used & “Like New” inventory at McCannOnline.com

2022 Case 521G, S/N 253822, 266 Hours, CAB/AIR/HEAT, RIDE CONTROL, THIRD VALVE, LIMITED SLIP DIFF, JRB COUPLER2.5 YARD GP BUCKET, DELUXE CAB .. $129,900

2022 Case 321F, S/N NNHP04331, 241 Hours, CAB/AIR/HEAT, HIGH SPEED TRANSMISSION, SKID STEER STYLE COUPLER, 1.7 cu yd BUCKET, LIMITED SLIP DIFFERENTIAL, THIRD VALVE HYDRAULICS TIRES LIKE NEW, PREMIUM CAB $82,500

2023 Case TV370, S/N 2023 Case TR370B, 176 Hrs, CAB/AIR/HEAT, HYDRAULIC COUPLER, 84" GP BUCKET, DELUXE CAB, PREMIUM DISPLAY PANEL, GOOD TRACKS

$72,500

2019 Case Cx130D, S/N DAC130K7NKS7D1558, 358 Hours, CAB/AIR/HEAT, HYDRAULIC COUPLER, 18" BUCKET, AUX HYDRAULICS

$109,900

2023 Case TR270B, S/N JAFTR270LNM421971, 281 Hours, CAB/AIR/HEAT, E-H CONTROLS, HYDRAULIC COUPLER, 78" GP BUCKET, RIDE CONTROL, SELF LEVEL, HIGH FLOW HYDRAULICS, REARVIEW CAMERA, PREMIUM DISPLAY MODULE, FULL MACHINE WARRANTY UNTIL 1-30-25, JUST SERVICED READY TO GO $54,900

2018 Case CX245DSR, S/N NJS7K1152, 1306 Hours, Cab/Air, Kent Coupler, Aux Hydraulics, No Bucket, Bucket available at additional charge, Rental Fleet Roll Out $193,500

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Sakai R2H-4 - ’19, approx. 900 hrs. 83” triple drum static $85,500 ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls ....................................$35,200

Sakai R2H-4 static roller - ‘23, approx. 120 hrs., #C002897

$108,800

Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd

$P.O.R.

AGGREGATE EQUIPMENT

ASTEC GT205MF, (’18), 3,296 Hrs, 5 x 20 top deck, 5x18 bottom deck, 8 cu. yd. hopper, 5' wide double deck multi-frequency screen w/hydraulic vibrators, #C005896 $229,900

HAUL TRUCKS

LIEBHERR TA230 LITRONIC, (‘23), 361 Hrs, #C005550 $CALL

Sakai SW884ND - ‘19, approx. 2900 hrs., #C002777, Double drum Oscillatory

$148,400 Sakai SW300 - approx. 450 hrs, 39” drum, #C000211

Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd

$P.O.R.

$26,850.

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154

HAZEMAG APPH1515QL, (’93), Primary Impactor Portable Plant, 400HP electric crusher drive, 15 cu. yd. hopper, #C005559 $370,000

LIEBHERR TA230 LITRONIC, (‘23), 367 Hrs, #C005511 $CALL LOADERS AND EXCAVATORS:

Superior DT74J - ’19, approx. 1300 hrs. AC, Side shift, gutter brush, #C001774 $35,400

BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor

$152,800

Roadtec RX-300 - ’18, approx. 600 hrs. 4’ drum

$311,400

$148,900 KPI FT2650 – ’19, approx. 1800 hrs. Tracked jaw crusher

$546,950

Mauldin 1560 paver – ’22, approx. 600hrs. 8-14’, electric

HAZEMAG APS1315, (’10), 7'x20' triple deck screen, #C005792

$362,500

SIMPLICITY 6203, (’96), Dual Portable Screening Plant, 6’ x 16’ Triple Deck Primary Screen, 6’ x 20’ Triple Deck Secondary Screen, #4873

BROOMS

$295,000

SUPERIOR BROOM SM80K, (‘17) 2,250 Hrs, Enclosed Rops, AC, #C006107 $CALL

SUPERIOR BROOM SM80K, (‘17) 2,090 Hrs, Enclosed Rops, AC, #C006106 $CALL

CRANES

GROVE GHC85, (’23), 164 Hrs, #C005208 $CALL

LIEBHERR L550 XPOWER, (’17), 2,722 Hrs, innovative machine concept which combines performance, fuel efficiency, robustness and comfort. Power split driveline, #C003118 $125,747

LIEBHERR R924 LITRONIC, (‘23), 10 Hrs, The R 924 (Tier IV) crawler excavator replaces the predecessor R 924 (Gen 6) model. Its completely updated design is characteristic of the new range of "generation 8" machines, #C005679 $CALL LIEBHERR R934 LITRONIC, (‘23), 485 Hrs, The new R934 weighs approx. 35 tons, completely updated design is characteristic of the new range of "generation 8" machines, #C005399 $CALL

$956,200

GROVE GHC130, (’19), 932 Hrs, 130-ton lift capacity, #C004141

LIEBHERR R936 COMPACT LITRONIC, (‘18), 1,042 Hrs, Convenient and service-friendly, the R 936 Compact makes for safe working. With its tight slewing radius, this machine is especially well suited to urban applications, #C003377$CALL

$679,552

GROVE GRT880, (’22), 807 Hrs, 80-ton lift capacity, #C005002

GROVE GRT880, (’18), 2,476 Hrs, 80-ton lift capacity, #C004982

$447,711

LIEBHERR R956 LITRONIC, (‘22), 1,800 Hrs, 35' boom and 21' stick, #C004867 $CALL SAKAI SV544TB, (‘23), 2 Hrs, #C005470 $CALL

Ill. Presents Largest Infrastructure Program in State History

Gov. JB Pritzker and the Illinois Department of Transportation (IDOT) joined state and local leaders, labor and transportation stakeholders on Oct. 1, 2025, to announce the largest multi-year program to build and repair infrastructure in state history: $50.6 billion over six years, continuing an unprecedented investment in safety, mobility and quality of life made possible by the Governor’s Rebuild Illinois capital program. The new program, spread across all modes of transportation and touching every Illinois county, also includes $400 million to support 223 local projects. These projects, ranging from street and transit upgrades to bike and pedestrian improvements, are based on priorities submitted by counties, cities, townships, transit districts and other local agencies.

“Today, I’m proud to launch the latest roadmap — the largest in the history of the Illinois Department of Transportation,” said Pritzker. “Over the next six years, we’ll

it will also improve quality of life in Illinois — making it easier to walk and bike, catch a bus, deliver goods and get you safely from where you are to where you need to be.”

The Fiscal Year 2026-31 Proposed Highway and Multimodal Improvement Program will invest $32.5 billion in state and local roads and bridges, with $5.5 billion identified for the current fiscal year. A total of $18.1 billion is programmed for other modes, which includes $13.8 billion for transit, $2.9 billion for freight and passenger rail, $1.2 billion for aviation and $200 million for ports and waterways.

On the highways side, the program will build or improve 7,107 lane mi. of roads and 8.4 million sq. ft. of bridge deck on the state system, with $6.8 billion identified for 1,654 lane mi. and more than 1.3 million sq. ft. of bridge deck overseen by local governments.

continue investing across the board to build the best infrastructure system in the nation — and create good jobs for Illinoisans in the process. From Chicago and Rockford to Springfield and Decatur, to Carbondale and Metropolis, every corner of our great state will benefit.”

Continuing an approach started under Gov. Pritzker, IDOT’s new multi-year program is both comprehensive and multimodal, with investments in roads and bridges, aviation, transit, freight and passenger rail, waterways and bicycle and pedestrian accommodations. Projects are across state and local jurisdictions and in all 102 counties. The $50.6 billion eclipses the previous record of $41.4 billion set last year.

“Under Gov. Pritzker, our investments in transportation are doing more than ever to connect people to the meaningful destinations in their lives,” said Illinois Transportation Secretary Gia Biagi. “This new multi-year construction program will not only create jobs and economic opportunity, but

New to this year’s multi-year program is $400 million made available through special legislative appropriation and signed by Gov. Pritzker to help address local transportation needs, with consideration given to disadvantaged or economically distressed communities.

Of the 223 awards, 177 are for roads; 34 for bike and pedestrian improvements; 10 for transit; and two for ports. All projects required a Disadvantaged Business Enterprise goal to uplift small, local minority- and women-owned firms.

To acknowledge and salute the skilled trades that will be delivering the historic program for Illinoisans, Gov. Pritzker announced the new multi-year program at the training center for the Laborers International Union of North America on Chicago’s West Side. Under his administration, labor has been making transformational impacts to infrastructure throughout the state through the bipartisan Rebuild Illinois capital program, which has completed approximately $20.8 billion of improvements statewide on 21,309 lane mi. of highway, 815 bridges and 1,181 additional safety improvements.

Passed in 2019, Gov. Pritzker’s Rebuild Illinois is not only the largest capital program in state history, but also the first one that touches all modes of Illinois transportation: roads and bridges, transit, waterways, freight and passenger rail, aviation and bicycle and pedestrian accommodations.

IDOT graphic IDOT graphic

IDOT graphic

Stone Products Welcomes Customers to Open House

The event was held at the company’s Canton, Ohio, facility at 3105 Varley Ave. SW, and brought together industry professionals to enjoy good food, meet the team and take advantage of one-day-only product deals. Guests were treated to a food truck, coffee truck and Just Ice Cream, creating a festive atmosphere that reinforced the company’s commitment to customer relationships.

In addition to refreshments, attendees participated in giveaways, ensuring everyone left a winner. The open house also provided an opportunity to tour Stone Products’ shop and learn more about the company’s operations, equipment lines and staff expertise. Team members shared insight into the company’s focus on quality, service and long-term partnerships with brands such as Superior Industries, Worldwide, Durex, RD Olson and Hardox.

see STONE page 84

Stone Products’ staff Michelle Patterson and Terri Hershberger greeted attendees with door prizes and giveaways, ensuring every visitor felt appreciated.

(L-R): Steve Cunningham of Hardox Wearparts; Tom Provost of Stone Products; and Joseph Dorma of SSAB, posed with a dredge cutter head on display, showcasing Stone Products’ commitment to serving the aggregate and recycling industries.

(L-R): Mike Blumenauer and Tim Byrd of Stone Products; Marty Suarez, Joe Sedon and Steve Suarez, all of The Shelly Company, gathered inside the shop during a facility tour, standing in front of equipment serviced on-site.

Patrick Jacomet, executive director of the Ohio Aggregates & Industrial Minerals Association, and Levi Simmons, Stone Products team member, joined in the celebration, emphasizing the company’s community and customer ties.

Tyler Grigsby of Durex Products Inc. featured the company’s screening media and product line, answering questions and meeting with visitors throughout the day.

Blumenauer (L) of Stone Products and Jordan Stevenson of Beaver Excavating proved networking and business relationships were strengthened as industry professionals shook hands among the equipment displays.

Stone Products photo

Mark Sterling (L), president and CEO of Beaver Excavating and Stone Products and Matt Sterling, president of Beaver Excavating at the open house. Mark is the second generation of Sterlings to work at the company.

Guests gathered outside Stone Products’ Canton, Ohio, facility to enjoy food, conversation and equipment displays during the company’s Customer Appreciation open house.

Attendees entered raffle drawings for prizes including grills, coolers and Stone Products gear, adding excitement to the day’s events.

Mike

715-752-8112

JD 50G, A/C, Hyd Thumb, 5’7” Long Arm, Blade, Aux, #292872 ......................................$45,000

Kubota KX057-5, A/C, Hyd Thumb, Angle Blade, Aux Hyd, #296470 ........................$76,000

JD 331G, A/C, Hi Flow Aux, 2 Speed, Ride Control, #262952 .. $65,000

JD 310SL, A/C, 4X4, Ext Dipper, Ride Control, #262892 .... $99,000

JD 130G, A/C, Hyd Thumb, Aux, 9’11” Stick, 24” Shoes, #261469 ....................................$119,000

Komatsu PC138LC-11, A/C, Long Arm, CPLR, Rubber Pads, #298908 ......................$165,000

Bobcat T76, A/C, Joysticks, 2 Speed, Ride Control, Radio, Camera, #291427 $57,000

JD 320P, A/C, 4X4, Ext Dipper, Aux, 19.5 Tires, Coupler, #302479 $119,000

JD 135G, A/C, 9’11” Arm, 24” Shoes, Reduced Tail Swing, #249203 ........................$87,000

New Holland E57C, A/C, Hyd Thumb, Cplr, Aux Hyd, Blade, #293430 ........................$64,000

JD 650K, A/C, LGP, 28” Pads, 6 Way 128” Blade, Rev Fan, IGC, #262371 $114,000

CAT 430F2, A/C, Pilots, Ext Dipper, 4X4, Aux, 19.5 Tires, #299832 $95,000

JD 210G, A/C, Hyd Thumb, Coupler, 9’7” Arm, Rev Fan, #261276 ......................$127,500

CAT 306CR, A/C, Hyd Thumb, Coupler, Blade, Long Arm, #262710 ........................$58,000

JD 750K, A/C, LGP, 34” Pads, PAT 156” Blade, Drawbar, #294289 $118,000

JD 544K-II, A/C, Rev Fan, 20.5 Tires, Air Seat, GP Bucket, #262551 $127,000

JD 245G, A/C, Aux Hydraulics, 9’7” Arm, 32” Shoes, Air Seat, #262242 ......................$198,000

JD 325G, A/C, Joysticks, 2 Speed, Aux Hyd, #293433 ......................................$52,000

Komatsu HM400-3, A/C, 40 Ton, Tailgate, Bed Heater, #262951 $165,000

JD 624L, A/C, 3rd Spool, Ride Control, Roll Out BKT, Rev Fan, #292312 $85,000

Hamm 3412P, 2012, 84” vibratory padfoot compactor, EROPS w/ heat & A/C, 1,200HMR $82,500

Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new paint job, very good condition, 9,400 HMR . .$195,000

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready

$127,500

Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, 10.00R15 tires, 3,400 hrs . .

$21,500

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean $49,500

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires

$15,500

(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready From $79,500

Rammax Walk Behind Rollers, over 25 in stock, lever & remote

$4,000 to $10,000

(8) Sheepsfoot, 48" and 60", double drum & single drum, tow type

$4,000 - $6,500

Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday

$145,000

Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000

IR 185’s, JD diesels CALL

Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 HMR, work ready

$162,500

Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 HMR, work ready

$224,500

Komatsu PC220LC-8 Longreach, 2011, Young Boom/Stick 60’ reach, 3,500 HMR

$179,000

Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR

$72,500

Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready

$115,000

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition

$147,500

Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites

$87,500

Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites

$89,000

Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .

$122,500

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent .

.From $5,200

Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt $24,500

(2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition

$4,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Dozer Blade

$25,500 BUCKETS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads

$49,500

Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition

CALL

Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice CALL

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch, 22” Pads, 4,100 HMR

$82,000

Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, 9,900 HMR

Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock

$87,500

-Call For Your Needs FORKS

$142,500

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55 winch, 7,200 HMR

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent $4,000

.$229,500

Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl Single Shank Ripper, 8,400 HMR

Others Available Call Prices Are Negotiable - At Your Inspection

$152,500

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS winch, 28” pads, 7,300 HMR

MID COUNTRY MACHINERY

3410 Henry St SW Bondurant, IA 50035 515-454-8626

3509 Franklin St SW Bondurant, IA 50035 515-410-9900

DODGE 3478 5th Ave South Fort Dodge, IA 50501 515-574-2302

BLUFF 112 8th St Sergeant Bluff, IA 51054 712-943-4470

9206 Brewerton Rd Brewerton, NY 13029 315-288-6473

KOBELCO SK 210LC-11 EXCAVATOR, 321 HRS

2019 KOBELCO SK260LC-10 EXCAVATOR, 2797 HRS

KOBELCO SK260LC-11 EXCAVATOR, 145 HRS

LINKBELT 135 SPIN ACE, 5666 HRS

2044 HRS

2024 LINKBELT 145X4DZ EXCAVATOR, 91 HRS

2025 LINK-BELT 145X4DZ EXCAVATOR, 0 HRS

ZX17U-5N MINI EXCAVATOR, 47 HRS

$CALL 2025 ZX17U-5N MINI EXCAVATOR, 0 HRS $CALL 2025 ZX35U-5N MINI EXCAVATOR, 90 HRS

2025 ZX35U-5N MINI EXCAVATOR, 90 HRS

2025 ZX35U-5N MINI EXCAVATOR, 56 HRS

2025 ZX35U-5N MINI EXCAVATOR, 89 HRS

2025 ZX35U-5N MINI EXCAVATOR, 73 HRS

2025 ZX35U-5N MINI EXCAVATOR, 26 HRS

2025 ZX35U-5N MINI EXCAVATOR, 5 HRS

2025 ZX35U-5N MINI EXCAVATOR, 6 HRS

2025 ZX35U-5N MINI EXCAVATOR, 49 HRS

2025 ZX50U-5N MINI EXCAVATOR, 176 HRS

2025 ZX50U-5N MINI EXCAVATOR, 113 HRS

2025 ZX50U-5N MINI EXCAVATOR, 45 HRS

2025 ZX50U-5N MINI EXCAVATOR, 4 HRS

2025 ZX50U-5N MINI EXCAVATOR, 26 HRS

2025 ZX50U-5N MINI EXCAVATOR, 10 HRS

2025 ZX60U-5N MINI EXCAVATOR, 103 HRS

2025 ZX60U-5N MINI EXCAVATOR, 49 HRS

2024 ZX85USB-7 COMPACT EXCAVATOR, 250 HRS

2024 HITACHI ZX85USB-7 EXCAVATOR, 184 HRS

2025 ZX85USB-7 COMPACT EXCAVATOR, 2 HRS

2025 HITACHI ZX85USB-7 EXCAVATOR, 3 HRS

2025 ZX85USB-7 COMPACT EXCAVATOR, 2 HRS

$CALL

2025 LINK-BELT 145X4DZ EXCAVATOR, 10 HRS $CALL

2019 LINK-BELT 160X4EX EXCAVATOR, 621 HRS

2024 LINKBELT 220X4S EXCAVATOR, 127 HRS

2023 LINKBELT 245X4DZ EXCAVATOR, 759 HRS $CALL

2024 LINKBELT 300X4HD EXCAVATOR, 181 HRS

2024 LINKBELT 350X4 EXCAVATOR, 296 HRS $CALL

2025 LINKBELT 370X4S EXCAVATOR, 5 HRS

2025 LINKBELT 75X3 EXCAVATOR, 0 HRS

2025 LINKBELT 75X3 EXCAVATOR, 4 HRS

2020 LINKBELT 80X3 EXCAVATOR, 2205 HRS

2023 SANY SY35 MINI EXCAVATOR, 90 HRS

2025 SANY SY35 MINI EXCAVATOR, 4 HRS

2025 SANY SY35 MINI EXCAVATOR,

Bobcat of St. Louis Hosts Customer Appreciation Event

It was a beautiful day for an open house at

Bobcat of St. Louis hosted an open house customer appreciation event at its facility in Valley Park, Mo., on Oct. 9, 2025.

The event included a chance to meet the local Bobcat team, equipment displays and new machines and attachments. Customers also had the opportunity to discuss service, parts and maintenance with Bobcat certified diesel technicians.

To say “thank you,” guests were treated to lunch,

drawings for Bobcat merchandise and were offered special deals, including rental deals, 10 percent off parts and 15 percent off Bobcat brand attachments.

For more information, visit bobcatgdn.com/bobcat-of-st-louis.  CEG

see ST. LOUIS page 70

To say “thank you,” guests were treated to lunch, drawings for Bobcat merchandise and were offered special deals, including rental deals, 10 percent off parts and 15 percent off Bobcat brand attachments.

(L-R) are Dustin Nelson of Bobcat of St. Louis; Robert Hunt of Flawless Pools and Excavating; August Portell of Flawless Pools and Excavating; and Travis Turner of D&S Fence.

Testing this Bobcat T76 compact track loader are Gerry Funkhouser (L) and Dave Wall of the city of Sullivan.

(L-R): Bill Hahs, Hahs Farms; Shane Naeger of Bobcat of St. Louis; and Randy Meyer, Meyer Farms, discuss the details of this Bobcat E40 mini-excavator.

Standing in the bucket of a Bobcat T595 compact track loader (L-R) are David Konieczny of Bobcat of St. Louis with Chris Weishaar and Mike Blunt, both of Baxter Gardens.

Wendi Majerus of Bobcat Corporate talks with Butch Mattingly.

Brandon Jacobsen (L) of Greentech St. Louis and David Konieczny of Bobcat of St. Louis with a Bobcat T65 compact track loader.

Bobcat of St. Louis.

Bobcat skid steers, compact track loaders and mini-excavators are lined up and ready for the customer appreciation event.

Stk #C99983, 711 Hrs, Cab/AC, LGP, 24" Pads, 124" Blade $143,000

DEERE

Utility Expo 2025 Draws Record Crowd in Kentucky

Spanning 1.5 million sq. ft. of hands-on equipment demos, job site simulations and interactive product displays, the biennial event reaffirmed its place as North America’s largest trade show for utility and infrastructure professionals seeking the latest technologies, equipment and safety solutions. The show unveiled the latest breakthroughs in underground utility, electric transmission, telecom and water/wastewater technologies shaping the future of the industry.

“This year’s Utility Expo set a new benchmark for innovation and handson learning in our industry,” said Brianne Somers. “The remarkable turnout demonstrates the industry’s drive to adopt smarter, safer and more sustainable solutions for utility construction.”

Breakthrough Equipment, Technology Launches

Twenty manufacturers used The Utility Expo 2025 as their launchpad to showcase new utility construction equipment and technology. Highlights included:

• Hyundai Construction Equipment debuted its HT38 compact track loader in North America. The HT38 CTL can lift a .8-cu. yds. standard bucket to a pin height of 10 ft. 9 in.

• Diamond Mowers unveiled four mulching attachments: two drumheads for open and depth control models, a belt drive disc design, and a 50-in.

model for excavators.

• Vermeer showcased the ML180 mini loader which features advanced electricover-hydraulic controls, a suspended undercarriage and air-ride suspension technology.

The ML180 helps address persistent operator fatigue and productivity challenges in traditional stand-on mini loaders.

• John Deere introduced two redesigned compact excavator models: the 17 P-Tier and the 26 P-Tier. Built to John Deere specifications and shaped by extensive customer

feedback and testing, both models feature enhancements that improve versatility and ease of operation.

Attendees took advantage of live demonstrations and test drives, making the show a premier destination for discovering fieldready solutions.

New for 2025, The Quick Pitch Showcase introduced 30 small, mid-sized and new-toshow companies that shared product information and innovations directly with attending media during a special pre-show break-

fast. This early access gave journalists a first look at emerging technologies and products before the show floor opened.

“As a first-time exhibitor at The Utility Expo, the Quick Pitch Showcase was an incredible opportunity for us to introduce our company and products to the media,” said Steve Wojtaszek of 3S Craftings LLC. “It was a welcoming environment that truly set the tone for a successful first show.”

see EXPO page 96

The Utility Expo photo

The Utility Expo will return to the Kentucky Exposition Center in Louisville, Ky., in 2027.

The Utility Expo photo

The show spanned 1.5 million sq. ft. and had hands-on equipment

demos, job site simulations and interactive product displays.

The Utility Expo photo Twenty manufacturers used The Utility Expo 2025 as their launchpad to showcase new utility construction equipment and technology.

SALES • SERVICE • RENTALS • PARTS

Lippmann, Maverick Environmental Expand Partnership

Lippmann, a manufacturer of crushing, screening and stacking equipment, has expanded its partnership with Maverick Environmental Equipment, providing full dealer coverage into Michigan and Ohio. This strategic move enhances Lippmann’s presence in two high-demand regions to ensure customers in the aggregate, mining and recycling industries have direct access to premium crushing equipment, a large parts inventory and skilled service and support.

“We are excited to build upon Maverick’s success with the Lippmann brand in California and bring that same level of performance to Michigan and Ohio.”

John OÊNeill

Maverick Environmental

Headquartered in Alma, Mich., Maverick is an equipment dealer of aggregate processing, waste recycling and environmental equipment, parts, attachments and services. The company has built a strong reputation for carrying industry-leading machinery and providing support, becoming the go-to partner for customers seeking dependable machinery solutions and service.

Lippmann and Maverick work closely together, always building a relationship through a mutual dedication to trust, service and a shared focus on delivering value to customers.

“Maverick has been a trusted partner for many years, and we’re excited to expand our geographic footprint, equipment offerings and service coverage with them in these key regions,” said John Megarry, commercial product and sales director. “Their proven track record of delivering exceptional value, paired with Lippmann’s industry-leading equipment,

will provide customers in Michigan and Ohio with the unmatched machinery and support they need to succeed.”

With this expansion, customers in Michigan and Ohio will continue to benefit from local access to Lippmann’s full line of crushing, screening, stacking and specialty equipment, supported by Maverick’s knowledgeable team, service technicians and parts network.

“We are excited to build upon Maverick’s success with the Lippmann brand in California and bring that same level of performance to Michigan and Ohio. With the Lippmann brand comes its people, and we are fortunate enough to bring a true Lippmann expert on board with the addition of Maurice Holly to our team. He has a wealth of experience with Lippmann and is a critically important part of our continued success in providing Lippmann equipment, parts and service,” said John O’Neill, CEO and managing partner of Maverick Environmental.

For more information, visit LippmannCrushers.com and maverickenvironmentalequipment.com. 

Maverick Environmental Equipment logo

We specialize in Cat Used Parts and Attachments

Huge attachment inventory. Over 300 attachments in stock. We Buy, Sell, and Trade. Inventory changes daily, please call to discuss your needs and how we can help.

DOZER BLADES IN STOCK

D10R/T, D9R/T, D8R/T, D7R, D7R LGP, D7E, D6R LGP, D6K, D5G, D5C.

DOZER RIPPERS IN STOCK

D10R/T SS ripper, D11R/T SS ripper, D7R MS ripper, D6N MS ripper, D5K MS ripper, D5C/D4C/D3C ripper.

EXCAVATOR ATTACHMENTS IN STOCK

Quick Couplers for Most Models from Mini - 374D/E

336 Excavator - 30”, 36”, 42”, 54”, 60” all in stock.

315 Excavator - Most Sizes from 24” - 60” ditch cleaner

312/314 Excavator - 24”, 30”, 36”, 60” ditch cleaner

320/321/312 Excavator - 24”, 30”, 42”, 54”, 80” ditch cleaner

345/349 Excavator - 36”, 48”, 54”, 60”, 72”

QUICK COUPLER FORKS IN STOCK

420 D/E/F, 950-972 Fusion, 953, 972 HPL, Cat Telehandler

WHEEL LOADER BUCKETS FROM 914-992

Many sizes and styles available. Pin-on and Quick Coupler.

M/H SERIES GRADER RIPPERS IN STOCK Also front pushblock counterweights.

RECENTLY PARTED MACHINES INCLUDE

D4c, TH83, 988F, 769C, TH460B, TH360B, 242B, 320C, 345C, 420E IT, 836G, 345CMH, M325DMH, D6T

308E CR: Dismantling now- 1,000 hour machine, HYD thumb, mechanical quick coupler. Also have HYD couplers available

CB534D xw: Dismantling now- All parts available

345C: Dismantling 2- Most parts available Cat IT coupler buckets: New surplus in many different sizes

Light Material Buckets: Light material buckets, Pin-on and Quick coupler available.

style. Truck Beds and Tailgates: Tailgates for

Backhoe and Small Loader Buckets: Quick coupler and pin on buckets for 420 backhoe, 914 and 918 Loader buckets.

980 GP Bucket: Cat 980 loader buckets available, many GP buckets on hand. Sizes form 7-10 yards.

972 GP Bucket: 972 GP bucket, Several available,

Excavator Sticks and Booms: Excavator stick, booms, and cylinders in stock.

Kentucky Awards $7.75M in Funding for 17 Critical Local Bridge Projects

As part of his commitment to ensure safer travel for Kentucky families, Gov. Andy Beshear announced the latest round of funding recipients from the County and City Bridge Improvement Program on Oct. 2, awarding $7.75 million for 17 critical bridge projects across 13 Kentucky counties and three cities. The funding will repair, replace or preserve bridges to improve safety, extend their lifespan, remove lengthy detours and maintain important community links for Kentuckians.

Since the first round of funding was announced in 2025, $32.6 million has been awarded to local governments to address bridges that are closed, have posted weight restrictions or need repair.

“Kentucky’s bridges don’t just connect roads; they connect our families to their jobs, schools and communities,” said Beshear. “While construction may seem like a hassle, these projects will mean safer travel, fewer traffic delays and more potholes getting fixed. These are good things for Kentuckians.”

Awards will be issued to the following recipients:

• Barren County Fiscal Court

• Calloway County Fiscal Court

• city of Georgetown

• city of Winchester

• city of Wurtland

• Crittenden County Fiscal Court

• Graves County Fiscal Court

• Laurel County Fiscal Court

• Letcher County Fiscal Court

• Livingston County Fiscal Court

• Marion County Fiscal Court

tures that most urgently need attention, so Kentuckians can travel safely and with confidence,” said KYTC Secretary Jim Gray. “Replacing closed bridges and restoring access for school buses and large vehicles makes a big difference not only in time savings but in the quality of life for residents.”

Among the latest awards are projects in Letcher, Trigg and Washington counties that address long-standing needs.

“Small counties just can’t come up with the money it takes to replace bridges this size, so we are very thankful for these funds.”

Timothy

Graves Washington County

The Letcher County Fiscal Court received $811,000 for a bridge replacement project on Bill Lewis Hollow. The investment will replace an outdated structure and restore safe, reliable access.

“This bridge has been a longstanding need for our community,” said Letcher County Judge/Executive Terry Adams. “Today’s announcement gives us the resources to finally address it. Replacing this structure means safer travel for our families and renewed confidence for everyone who depends on this route.”

• Mason County Fiscal Court

• McCracken County Fiscal Court

• Trigg County Fiscal Court

• Union County Fiscal Court

• Washington County Fiscal Court

The Trigg County Fiscal Court received $620,000 for a total replacement of a bridge, with a posted weight limit and more than a mile detour, on North Tanyard Road. The once32-ft. bridge will extend to 72 ft. in length, replace timber support columns with steel and undergo other modernizations to protect and extend the life of the new structure.

“Thank you to Governor Beshear, the legislature and the Transportation Cabinet for making the program available to us. It ensures that rural communities like ours don’t get left out and have an opportunity to improve our roads and bridges with funding that is not available to us locally,” said Trigg County Judge/Executive Stan Humphries.

The Washington County Fiscal Court received $900,000 for a bridge replacement on Sulfur Lick Road. The bridge has a posted weight limit of five tons and a detour of more than 6 mi.

This fourth round of awards funds 12 bridge replacements and five bridges that will be repaired or preserved to extend the life of existing structures. All 17 bridges are currently closed or posted with weight restrictions. Kentucky

Transportation Cabinet (KYTC) engineers reviewed and validated each project to ensure the most effective solution.

“With these awards, we’re addressing the struc-

“We are so thankful in Washington County to have leaders like Gov. Beshear, Secretary Gray, Commissioner Lewis and our legislative body to fund programs like these,” said Washington County Judge/Executive Timothy Graves. “Small counties just can’t come up with the money it takes to replace bridges this size, so we are very thankful for these funds.”

Recommended by Gov. Beshear and authorized by the 2024 legislature through House Bill 265, the County and City Bridge Improvement Program set aside $25 million in each of the 2025 and 2026 fiscal years. To date, 75 projects consisting of 67 county projects and eight

have been awarded. 

PLEASE CONTACT YOUR LOCAL DEALER:

GHD-6, GHD-7, GHD-9, GHD-10 & GHD-12

*SLIP-FIT LOWER TOOL BUSHING for easy serviceability/ hassle-free maintenance!

*2-SPEED SELECTOR VALVE allows operator to adjust the speed/power of the hammer based on the material type for optimized performance!

Be sure to check out our Speed Selector video for more details!

Celebrating 40 Years of Quality, Dedication and Commitment to Excellence and Unmatched Support in the Construction, Demolition and Mining Industries! 1985 – 2025

ILLINOIS

INDIANA

KANSAS

NEBRASKA

MISSOURI

MICHIGAN

ILLINOIS

IOWA

MISSOURI

WISCONSIN

MGX Equipment offers new and used equipment, fleet, OEM parts, and industry-leading repair and for fleets across the country. Contact the MGX bra equipment needs.

Industrial Tractor Parts Touts Nearly 70 Years of Business

Founded in December 1956, Industrial Tractor Parts (ITP) can trace its roots to Cesar Mevorah, who emigrated from Bulgaria to the United States in the 1940s. In Europe, Cesar had developed expertise in tractor parts during an era when mechanized farming and tracked machines were becoming more common. Forced to flee Eastern Europe during World War II, he arrived in New York City with little more than knowledge of the trade and the determination to start anew.

To support his family, Cesar initially imported a wide range of goods — including Bulgaria’s famed roses and fragrances — until he could bring his wife and daughter to America. The family eventually spent time in Fargo, N.D., where Cesar established his first warehouse and began importing tractor parts in earnest. Later, he returned to Queens, N.Y., where in December 1956, Industrial Tractor Parts was formally founded.

The business began with a small New York office and a Brooklyn warehouse. Cesar focused on importing quality tractor and crawler parts and distributing them across the region, laying the foundation for a company that would span generations.

Industry Veteran Joins Industrial Tractor Parts in Illinois

Industrial Tractor Parts has welcomed Larry Gindville as the new general manager of its Illinois branch. Gindville, a seasoned equipment industry professional, brings more than two decades of dealer-side leadership experience to the company.

Gindville’s career began in the contracting world before he transitioned to dealerships in 2001. He has held key leadership roles, including vice president and general manager with both Volvo and Komatsu dealer groups, overseeing multiple locations across Wisconsin and the Upper Peninsula.

Gindville said his focus will be on “expanding growth” by strengthening customer relationships, improving inventory and expanding the territory this branch can serve.

“We’re a stocking distributor, which sets us apart from competitors who act as middlemen,” he said.

Gindville emphasized that his goal is to continue branding Industrial Tractor Parts in the market as a trusted source for undercarriage and parts, highlighting its nearly 70-year history and longstanding role as a Berco stocking distributor. With his addition — and a growing team in Illinois — Gindville sees significant potential to serve customers across Illinois and surrounding states.

Following Cesar’s passing, the next generation — his son-in-law — took the reins. In the 1960s, he forged what would become a defining partnership.

Traveling to Italy, he met with Berco, already a well-regarded name in the undercarriage industry. With little money in hand and his Italian routes, he asked Berco’s leadership to extend credit and trust. Berco agreed, providing containers of parts on consignment — an extraordinary show of faith at the time.

That trust paid off. With Berco’s product line behind it, Industrial Tractor Parts quickly established itself as a premier aftermarket supplier. By the mid-1960s, shipments were coming into New York and a second branch in New Orleans, fueling rapid growth.

For decades since, Berco has remained central to ITP’s business, with its signs displayed proudly at every ITP warehouse.

Fourth Generation: New Era of Growth, Modernization

Nearly three years ago, the company welcomed its fourth generation of family leadership with the arrival of Jack

Sitzer. Bringing a fresh perspective and forward-looking mindset, Jack has quickly made an imprint on the organization while continuing to learn from the third generation, his two uncles, whose decades of experience provide both guidance and continuity. Jack’s leadership has not only carried forward ITP’s long-standing tradition of quality and service, but also accelerated its modernization and expansion efforts.

One of his first major initiatives was the implementation of a new ERP system, creating efficiencies across operations and strengthening the company’s ability to scale. Alongside this, he has overseen the recruitment of several new hires, building a stronger team equipped to support growth and innovation. Jack is also spearheading a complete redesign of the company’s website, with integrated e-commerce capabilities currently in development and slated to launch in early 2026. This will provide customers with faster, more seamless access to ITP’s extensive product catalog and enhance their overall purchasing experience. see ITP page 82

Jack Sitzer, fourth-generation leader of Industrial Tractor Parts, is surrounded by the company’s extensive inventory of chains and undercarriage parts.

Shown here is the newly manufactured ITP-branded roller.

Stacks of branded ITP rubber road liners, which underscore the company’s focus on consistency, quality and visibility across its product line.

Scale Models for Sale

Realistic Scale Models of Construction Equipment, ideal gifts for

Mack Granite Standard Mixer, 2008 World of Concrete, 1:34 scale - $150

Granite Material Handler w/ Concrete forms, 2007 World of Concrete, 1:34 scale - $160

Mack

Cat Rental Store Flatbed Hauler w/ Cat 420D IT Backhoe/ Loader, 1:50 scale - $110

Caterpillar 287D Multi Terrain Track Loader, CCM Model, 1:24 scale - $335

Caterpillar

Caterpillar D10N Track-Type Tractor, 1:50 scale - $60

Caterpillar 225 Crane w/ clamshell Bucket, 1:50 scale - $60 Caterpillar

Caterpillar 936 Wheel Loader, 1:50 scale - $50

CENTRAL POWER SYSTEMS & SERVICES

www.cpower.com

9200 Liberty Drive

Liberty, MO 64068

816-781-8070

Wichita, KS

316-943-1231

Woodward, OK

580-256-6014

Salina, KS

785-825-8291

Colby, KS

785-462-8211

Springfield, MO

417-865-0505

Joplin, MO

417-726-5373

Riverside, MO

816-415-6787

Wichita, KS 316-789-7370

Yukon, OK

405-324-2330

St. Peters, MO

314-427-4911

Liberty, MO 816-415-6700

Tulsa, OK

918-984-6565

Cat Holds Regional Finals for Global Operator Challenge

Operators from across the U.S. and Canada gathered Sept. 23 and 25 for the start of the 2025 North American Regional Finals of Caterpillar’s Global Operator Challenge (GOC).

Set against Caterpillar’s signature centennial gray, the event showcased not only the latest in construction equipment but also the talent and skill of the men and women who operate them.

Helping to emcee the event via livestream was Jarryd McNeil, who is an X Games/motocross athlete and heavy equipment enthusiast. McNeil is a motocross champion, track builder and three-time XGames Best Whip medalist.

Brian Hayden, Hayden Excavating and Welding Inc. of Maine, representing dealer Milton Cat, was crowned Eastern Region semifinal champion. Hayden finished the four GOC events with the lowest point total of 1,313, which is a combination of time and penalties.

“What makes me proud is just, you know, nothing to do with me,” said Hayden. “It’s bringing recognition to the operators that devote their time and lives to what they do and then showcasing them with their skills.”

Brock Leclerc, Quattro Constructors of British Columbia, representing dealer Finning Canada, was crowned Western Region semifinal champion. He completed the same four challenge events with 1,540 points.

“It’s beyond exciting what we’ve accomplished here as a group,” said Leclerc. “Everybody working with great sportsmanship ... it’s been an unreal, awesome day and amazing experience.”

Both champions will advance to the final round of the Global Operator Challenge in

March 2026.

The event’s competition kicks off the regional finals for North America, split geographically: September’s event saw competitors from dealers mainly east of the Mississippi — including Toromont CAT, Caterpillar’s eastern Canada dealer. On Sept. 25, operators from mainly west of the Mississippi stepped up, joined by Finning, representing western Canada.

From there, three winners — one from each sub-region including the Americas South program — will join forces to represent the Americas team at the Global Finals in Las Vegas in March.

Among those leading the charge at the GOC was Jason Hurdis, global industry solutions manager and execution lead for the 2025–2026 Global Operator Challenge Series.

“We launched the Global Operator

Challenge in 2019 to spotlight the skilled trades,” Hurdis said. “Yes, our machines are becoming more advanced — but at the end of the day, it all comes down to the operator in the seat.”

That focus on human talent is the heart of the event. Caterpillar’s Global Operator Challenge was built to honor skilled labor, promote the career path of machine operation and inspire the next generation to consider a future in the trades.

“We’re bringing together champions from three major regions globally, North and South America combined, Europe-AfricaMiddle East and Asia Pacific,” said Hurdis. “Each will send three operators to compete for the global title.”

So, what’s at stake? For starters, there’s a $10,000 prize — either in cash or a firstclass trip for two to any Caterpillar facility

worldwide (depending on local laws) and, of course, recognition.

“They get trophies, custom belt buckles and beautifully etched glass containers with the machines they competed on,” said Hurdis. “But more than that — they earn something you can't buy — bragging rights.”

The competition puts operators through their paces on four key machines — all painted in Centennial Gray to celebrate Caterpillar's 100 years:

• 285 compact track loader,

• 320 Next Gen excavator,

• D4 track-type tractor, and

• 938 Next Gen wheel loader

Each machine challenge is designed to test precision, efficiency and control—critical skills for any seasoned operator.

Caitlin Maddock-Bahr, global social media manager and marketing lead for the 2025–2026 Global Operator Challenge Series, echoed a common theme when asked why this event matters so much:

“Talk to any customer around the globe, and you’ll hear the same thing — the number one pain point is skilled labor,” she said.

“That includes operators and technicians. We want to retain talent, celebrate these incredible professionals and recruit new operators into the industry.”

Maddock-Bahr added why choosing a career in operating heavy equipment is a rewarding career path.

“You get to work with your hands, be outside and see the real-world results of your labor. An operator has been on every interstate, golf course, housing subdivision and more before we even get to use it, drive on it or live in it.”

(L-R) are Matthew Chrysler of MacAllister Cat and Jaime and Brendan Clarke, both of Fonson Company in Brighton, Mich.

Caterpillar photo Brian Hayden of Hayden Excavating and Welding Inc., Maine, holds first place trophy for the Eastern Region.

Caterpillar photo Brock Leclerc, Quattro Constructors of British Columbia, hold the first place trophy for the Western Region.

Caterpillar photo

Helping to emcee the event via livestream was Jarryd McNeil, who is an X Games/motocross athlete and heavy equipment enthusiast.

Using the Cat 938 wheel loader contestants load and haul material and dump it into the articulated truck; then, swap out the bucket for forks and transport pipes across the route and place them on a flatbed trailer.

with a telescop

imagi , don

much

Buck and Knobby JCB www.buckandknobbyjcb.com 9127 Airport Highway Holland, OH 43528

855-218-2825 Burns JCB www.burnsjcb.com

Covering Northeast Ohio 8155 Roll & Hold Pkwy. Macedonia, OH 44056

4805 Scooby Lane Carroll, OH 43112 740-654-5304

920 Deneen Avenue Monroe, OH 45050 513-649-8105 1330 KY - 151 Frankfort, KY 40601 502-699-2681

1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000

600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400

65809 Gratiot Ave. Lenox, MI 48050 586-727-7502 4600 AIS Drive Bridgeport, MI 48722 989-777-0090

866-459-6713 CSTK JCB www.cstkjcb.com

401 Shawnee Avenue Kansas City, KS 66105 913-371-0868 Option 2

8300 M-72 East Williamsburg, MI 49690 231-267-5060

North Star JCB www.northstarjcb.com 31W019 North Avenue West Chicago, IL 60185 331-465-0000 Company Wrench www.companywrench.com

56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Continental Equipment Corp. www.ceceq.com

406 Old Rt 66 Hamel, IL 62046 618-633-2622

8080 State Rt 16 Hillsboro, IL 62049 217-532-3222

State Route 267 South Greenfield, IL 62044 217-368-2486

7978 Veterans Pkwy. St. Peters, MO 63376 636-281-4450 Sievers JCB www.sieversjcb.com

14464 Shad Rd Carlinville, IL 62626 217-854-3191 1351 W Jackson St Auburn, IL 62615 217-438-6111

YES Equipment & Services, Inc. www.buyjcb.com

11715 W Silver Spring Road Milwaukee, WI 53225 888-276-4365

7001 Manufacturers Drive Madison, WI 53704

888-276-4365

50th Avenue West

7344 S. Frontage Road Sheboygan, WI 53081

Shawnee Avenue Kansas City, KS 66105 913-371-0868 St. Louis, MO 314-771-6666 Park City (Wichita), KS 316-744-2061 Oklahoma City, OK 405-577-2222

Equipment Co. www.ronsonequipment.com

18030 Wicker Avenue Lowell, IN 46356 219-696-5680

10761 West Coulter Road Westville, IN 46391 219-785-2909

NDDOT Academy Marks 20 Years of Excellence in Training

The North Dakota Department of Transportation (NDDOT) celebrated the 20th year of its Fall Transportation Technician Training Academy Oct. 6, 2025, at Camp Grafton located just south of Devils Lake.

The week-long academy provides new maintenance team members from across the state with classroom and hands-on training on machinery, processes and productivity and is taught by senior team members sharing expertise gained over years on the job.

This NDDOT program plays a central role in promoting consistency, safety and teamwork statewide. Over the last 20 years, the academy has trained 1,248 students, adding up to more than 62,400 hours of training.

Last year, the academy earned the American Association of State Highway and Transportation Officials President’s Award — a national honor that recognizes the impact made by NDDOT team members involved in the academy. The academy also is offered to operators from Tribal Nations across the state.

“After 20 years, the Transportation Technician Training Academy remains a cornerstone of NDDOT’s commitment to excellence,” said Matt Linneman, NDDOT deputy director of engineering. “By combining hands-on experience, mentorship and teamwork, we’re not just training team members, we’re shaping the future of transportation in North Dakota.”

At the graduation ceremony, Linneman presented a memento of appreciation to the North Dakota National Guard for their partnership. The training academy is a mutually beneficial partnership between the NDDOT and the National Guard at Camp Grafton. Participants are provided with real-world road maintenance experience while repairing roads at Camp Grafton, allowing a safe and secure training environment.

NDDOT presented a memento of appreciation to the North Dakota National Guard for their partnership.

As the academy enters its third decade, NDDOT remains committed to preparing the next generation of transportation professionals. By combining hands-on experience, mentorship and a focus on safety and teamwork, the academy continues to strengthen North Dakota’s transportation workforce and ensure the state’s roads are well-maintained for years to come.

For more information, visit dot.nd.gov. 

NDDOT photo

This NDDOT program plays a central role in promoting consistency, safety and teamwork statewide.

The North Dakota Department of Transportation (NDDOT) celebrated the 20th year of its Fall Transportation Technician Training Academy Oct. 6, 2025, at Camp Grafton located just south of Devils Lake.

NDDOT photo

By combining hands-on experience, mentorship and a focus on safety and teamwork, the academy continues to strengthen North Dakota’s transportation workforce and ensure the state’s roads are well-maintained for years to come.

NDDOT photo

Last year, the academy earned the American Association of State Highway and Transportation Officials President’s Award.

for you. From com

pact telehandlers to rotating te

lehandlers and

andlers have proven themselve t of the world

everything in betw com. durability of Manitou telehandl

s a way to lift it, M een: if there’ ers to work for you s around the world, anitou will help you

JCB North America, NAHICA Announce New Partnership

JCB North America announced its partnership with the National Hispanic Contractors Association (NAHICA), reinforcing its commitment to advancing Hispanic participation, leadership and entrepreneurship in United States construction.

“The Hispanic contractor community plays a vital role in building America’s infrastructure,” said Marc André Dubois, vice president, marketing of JCB North America.

“Our collaboration with NAHICA reflects JCB’s deep-rooted commitment to empowering diverse entrepreneurs by providing access to the innovative equipment, training and flexible financing solutions. We’re proud to support this hardworking community as they lift higher, reach further and dig deeper to shape the future of construction.”

Through this sponsorship, JCB and NAHICA will work to expand access to business development resources, technical training, business financing alternatives and mentorship for Hispanic contractors nation-

wide.

JCB logo

NAHICA President Sergio Terreros said,

“JCB’s involvement is a powerful step forward for our members. Together, we’re creating pathways for Hispanic-owned businesses to thrive, generate jobs and strengthen the construction industry nationwide.”

The partnership with NAHICA follows JCB’s recent announcement regarding its plans to double the size of its facility being constructed in San Antonio, Texas, to one million sq. ft. This major expansion underscores JCB’s long-term commitment to United States manufacturing and job creation, particularly in a region with a strong and growing Hispanic workforce. For more information, visit jcb.com. 

Liberty, MO

816-415-6700 Springfield, MO

417-865-0505

St. Louis, MO

314-427-4911

Garden City, KS 620-765-3118

Salina, KS

785-825-8291

Colby, KS 785-462-8211 Wichita, KS 316-943-1231

Oklahoma City, OK 405-324-2330 Tulsa, OK 918-984-6565

Grand Forks, ND 701-772-5006 Devils Lake, ND 701-662-5331 Williston, ND 701-572-5050

Southeastern Equipment Co. Promotes Megan Laughlin to Vice President of HR

Southeastern Equipment Company announced the promotion of Megan Laughlin to vice president of Human Resources. In this new role, Laughlin will continue to lead the company’s people strategy with an expanded focus on job enablement, education and professional development across the organization.

Laughlin joined Southeastern in 2023 and has been instrumental in transforming the HR function into a strategic pillar of the business over the past two years. Her leadership has played a key role in equipping every team member with the tools, leadership and benefits they need to succeed. She helped drive initiatives in enhancing employee benefits, modernizing onboarding and training programs and creating a workplace culture that puts people first.

“At Southeastern, our customers tell us time and again that it’s our people who make the difference, and I agree,” said Thor Hess, president of

Southeastern Equipment Company.

“We win by putting customers first, showing them that they are valued, respecting their time and money and being responsive when they need us. Megan’s leadership has already shaped Southeastern’s HR vision, and we’re excited for the impact she’ll bring at this elevated level.”

In addition to her ongoing leadership in HR operations, Laughlin will

now oversee expanded initiatives in learning and development, including a newly created role dedicated to company-wide training.

“I’m incredibly honored to step into the role of vice president of Human Resources. This promotion is a testament to the power of perseverance, and I’m deeply grateful for Southeastern’s unwavering investment — not just in my growth, but in the people who make this company thrive,” said Laughlin. “I truly believe that investing in people is the key to Southeastern’s continued success, and I’m excited to help shape a culture where every individual feels valued, supported and empowered to reach their full potential.”

This promotion underscores Southeastern’s long-standing commitment to building a responsive, empowered workforce that delivers exceptional service by putting customers first.

For more information, visit southeasternequip.com. 

ARTBA Elects Cat Group President

Anthony ‘Tony’ Fassino Its New Chair

Anthony (Tony) D. Fassino, group president, construction industries, Caterpillar Inc., was elected 2025-2026 chair of the American Road & Transportation Builders Association (ARTBA). The announcement was made during ARTBA’s national convention, held Sept. 28-Oct. 1 in Dallas, Texas.

Fassino, a 30-year company veteran, has extensive expertise in engineering, sales, product development and operations across North America and Asia. Today, he is responsible for a global business that includes earthmoving, excavation, building construction products, global construction and infrastructure, construction industries services and Cat rental and used divisions, along with the segment’s supply management group.

His roster of ARTBA volunteer leadership roles includes serving as senior vice chair (2025), first vice chair (2024) and vice chair-at-large (2021-23). Fassino co-chaired the association’s reauthorization task force, a 27-member group that developed the industry’s policy proposals for the next federal surface transportation bill due by Oct. 1, 2026. “Moving America Forward: A Blueprint for Strategic Highway & Public Investment” was unanimously approved by ARTBA’s board in May.

At an Oct. 1 ARTBA board meeting, Fassino outlined key issues driving the transportation construction industry’s agenda for the year ahead. He noted these items were con-

sistent with the association’s five-year strategic plan. Among them:

• Securing robust and timely surface transportation program reauthorization that increases federal highway and public transportation investment to recapture the lost purchasing power from unforeseen inflation surge from 2021 to 2023.

• Pursuing a regulatory structure that supports expanded infrastructure improvements. Fassino said this means pushing for thoughtful solutions on regulations like Buy America expansion and the Occupational Safety & Health Administration’s proposed heat rule to ensure they do not impose unnecessary requirements, along with ARTBA’s ongoing legal advocacy efforts to stop federal overreach on issues like the Waters of the United States rule.

• Broadening the infrastructure coalition by partnering with the general business community to articulate how strong federal leadership facilitates a national transportation infrastructure network that promotes economic competitiveness, security and prosperity for all Americans.

• Developing a safety and mobility campaign that highlights the ability of infrastructure improvements to enhance daily life for all Americans and ensures that both roadway workers and motorists — with added emphasis on teen drivers — get home safely at the end of each day.

For more information, visit artba.org. 

murphytractor.com

Park City, KS 316-942-1457

Great Bend, KS 620-792-2748

Humboldt, KS 620-473-7020

Olathe, KS 913-298-7373

Topeka, KS 785-233-0556

Ulysses, KS 620-356-1071

Dodge City, KS 620-227-3139

Gering, NE 308-436-2177

Omaha, NE 402-894-1899

Lincoln, NE 402-467-1300

Grand Island, NE 308-381-0741

North Platte, NE 308-534-7020

Kansas City, MO 816-483-5000 Springfield, MO 417-863-1000

Des Moines, IA 515-263-0055

Fort Dodge, IA 515-576-3184

Sioux City, IA 712-252-2753

Waterloo, IA 319-235-7085

Brunswick, OH 330-220-4999

Cambridge, OH 740-439-2747

Canton, OH 330-477-9304

Cincinnati, OH 513-772-3232

Columbus, OH 614-876-1141

Jackson, OH 740-688-4100

Lima, OH 419-221-3666

Painesville, OH 440-639-0700

Poland (Youngstown), OH 330-629-6299 Rossford, OH 567-352-7001

Vandalia (Dayton), OH 937-898-4198

www.westsidetractorsales.com

Bemidji, MN 218-759-1996 Duluth, MN 218-722-7456

Grand Rapids, MN 218-326-9427

Ashland, WI 715-682-5522

Chippewa Falls, WI 715-834-2924

Merrill, WI 715-536-0633 Escanaba, MI 906-789-9054 Marquette, MI 906-789-7689

Fenton, MO 636-349-0200

Foristell, MO 636-463-2500

Mt. Vernon, IL 618-244-6800

Mitchell, IL 618-931-1034

Cape Girardeau, MO 573-334-0563

Paducah, KY 270-554-1131

Cuba, MO 573-885-0500

Owensboro, KY 270-684-2339

Evansville, IN 812-473-0484

Kingsport, TN 423-349-5001 Knoxville, TN 865-546-3207

Chattanooga, TN 423-855-0633

Nashville, TN 615-501-8600

Bowling Green, KY 270-842-3400

Louisville, KY 502-253-3721

Lexington, KY 859-788-3950

London, KY 606-862-8447

Southeastern Equipment Company photo

Megan Laughlin

www.brookstractor.com

Madison (Sun Prairie), WI

608-837-5141

Milwaukee, WI 414-462-9790

Green Bay (De Pere), WI 920-336-5711

La Crosse (West Salem), WI

608-786-2644

Stevens Point (Plover), WI 715-254-2777

Racine (Mt. Pleasant), WI 262-898-6700

Sparta, WI 608-351-2101

www.lec1.com

Ashland, KY

606-327-1709

Pikeville, KY

606-432-0321

Marietta, OH

740-373-5255

Cowen, WV

304-226-3299

Beaver, WV

304-255-1525

Elkins, WV

304-636-6421

Cross Lane, WV

304-204-1818

www.martinequipment.com

Goodfield, IL

309-965-2502

Peru, IL 815-224-4711

Rock Island, IL 309-787-6108

Springfield, IL

217-528-4347

Tolono, IL 217-485-6755

Cedar Rapids, IA 319-365-0515

Dubuque, IA

563-588-1950

Columbia, MO

573-657-2154

Palmyra, MO

573-769-2274

3300 Ogden Ave Lisle, IL 60532 630-355-7150

South Holland, IL 708-331-6362 Rockdale, IL 815-730-9011 Wauconda, IL 847-526-7700

Diamond Equipment Inc.

1501 Lynch Road • Evansville, IN 47711 800-258-4428 • 812-425-4428

120 Flex Park Drive • Bowling Green, KY 42103 800-489-1061 • 270-781-1061

17035 North IL Hwy 37 • Mt. Vernon, IL 62864 800-388-6396 • 618-242-2273

2000 Harlan Drive • Terre Haute, IN 47802 888-343-4747 • 812-299-4747 www.diamondequipment.com

McCann Industries

543 S. Rohlwing Rd • Addison, IL 60101 630-627-0000

250 E. North Frontage Rd. • Bolingbrook, IL 60440 630-739-7770

23921 S. Northern Illinois Dr. • Channahon, IL 60410 815-467-4480

2350 S. Laflin St. • Chicago, IL 60608 312-942-9200

4701 West 137th Street • Crestwood, IL 60445 708-597-3110

900 Louisiana Street • Merrillville, IN 46410 219-576-7800

1133 Indianapolis Blvd. • Schererville, IN 46375 219-865-6545

1360 N. Rand Rd. • Wauconda, IL 60084 847-526-9444 www.McCannOnline.com

Equipmentshare

8376 I-70 Dr SE • Columbia, MO 65201 573-273-4525 www.equipmentshare.com

Star Equipment Ltd.

1401 2nd Avenue • Des Moines, IA 50314 515-283-2215 • 800-369-2215

2625 W. Airline Hwy. • Waterloo, IA 50703 319-236-6830 • 800-791-9249

2950 6th Street SW • Cedar Rapids, IA 52404 319-365-5139 • 800-728-5139

2100 E. Lincoln Way • Ames, IA 50010 515-233-9500 • 866-856-2312 www.starequip.com

Columbus Equipment Company

2329 Performance Way • Columbus, OH 43207 614-443-6541

12500 Williams Rd. • Perrysburg, OH 43551 419-872-7101

712 Shepherd Ave. • Cincinnati, OH 45215 513-771-3922

3942 Brecksville Rd. • Richfield, OH 44286 330-659-6681

290 Old Steubenville Pike • Cadiz, OH 43907 740-942-8871

7570 New Carlisle Pike • Dayton, OH 45424 937-879-3154

2200 Venture Circle SE • Massillon, OH 44646 330-833-2420

818 Lee St. • Zanesville, OH 43701 740-455-4036

3668 US Route 23 South • Piketon, OH 45661 740-289-3757

www.columbusequipment.com

Sales • Service • Parts

Contact your local authorized Takeuchi dealer:

Alta Equipment Company

5105 Loraine Street • Detroit, MI 48208 313-394-1811

56195 Pontiac Trail • New Hudson, MI 48165 248-356-5200

8840 Byron Commerce SW • Byron Center, MI 49315 616-878-7450

3283 S Dort Hwy. • Flint (Burton), MI 48529 810-744-4840

3725 Old 27 S • Gaylord, MI 49735 989-731-9988

7500 E 15 Mile Road • Sterling Heights, MI 48312 586-474-5063

1061 Stepke Court • Traverse City, MI 49685 231-714-6210

613 E Stevenson Road • Ottawa, IL 61350 815-313-2070

www.altaequipment.com

Kelbe Brothers Equipment Co.

Brandeis Machinery & Supply Company

17000 Highway 41 N • Evansville, IN 47725 812-425-4491

7310 Venture Lane • Fort Wayne, IN 46818 260-489-4551

8410 Zionsville Road • Indianapolis, IN 46268-1524 317-872-8410

1801 Watterson Trail • Louisville, KY 40299 502-491-4000

160 County Park Road • Paducah, KY 42001 270-444-8390 www.brandeismachinery.com

Wilson Equipment Company

2180 Old Frankfort Pike • Lexington, KY 40510 859-254-6443 • 800-432-0913

828 W. Cumberland Gap Pkwy • Corbin, KY 40701 606-528-0700 • 800-274-9457

2124 Watergap Road • Prestonsburg, KY 41653 606-874-8036 • 800-955-9457 www.wilsonequipment.com

Central Power Systems & Services

4501 W Irving Street • Wichita, KS 67209 316-789-7370

1944-B N 9th Street • Salina, KS 67401 785-825-8291

1920 Thielen Avenue • Colby, KS 67701 785-462-8211

1285 Acraway Street • Garden City, KS 67846 620-765-3118

127 NW Hwy 270 • Woodward, OK 73801 580-256-6014 www.cpower.com

12770 W. Silver Spring Drive • Butler, WI 53007 262-781-4970

4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300

3101 French Rd. • De Pere, WI 54115 920-343-6496

www.kelbebros.com

Luby Equipment Services

2300 Cassens Drive • Fenton, MO 63026 636-343-9970

199 Airport Road • Cape Girardeau, MO 63702 573-334-9937

2999 Mexico Road • O’Fallon, MO 63366 636-332-9970

921 1st Street • Fairmont City, IL 62201 618-397-9971

4375 Camp Butler Road • Springfield, IL 62707 217-744-2233

2625 North 24th St. • Quincy, IL 62305 217-222-5454

www.lubyequipment.com

General Equipment & Supplies, Inc.

4796 Rice Lake Road • Duluth, MN 55803 218-297-1105

4600 Valley Industrial Blvd S • Shakopee, MN 55379 952-224-1500

www.generalequip.com

Martin Equipment Announces Opening of New Facility in Cedar Rapids, Iowa

Martin Equipment, a fourth-generation, familyowned John Deere Construction and Forestry dealer, has completed construction on its new facility in Cedar Rapids, Iowa. Located at 820 Thompson Way SW, the expanded location officially opened Oct. 20, 2025, and is set to deliver greater capacity, faster service and a better customer experience across eastern Iowa.

The 21,500-sq.-ft. building more than doubles the size of the previous 2900 6th St. SW location and is purpose-built to meet the demands of modern construction fleets. With a 60 percent increase in service bay capacity, including overhead cranes for production-class equipment, full-service cylinder repair and custom hose-making capabilities, the new space is engineered for efficiency and up-time.

“This new state-of-the-art facility was designed with our customers in mind,” saids DeLene Martin Bane, president of Martin Equipment. “From the layout to the tools and technology, every element supports faster service, greater efficiency and a better experience for equipment owners and operators across the eastern Iowa region.”

Inside, the facility features a service center staffed by factory-trained technicians; a spacious parts warehouse with more than three times the previous storage capacity; and a modern showroom and customer reception area designed for comfort and convenience.

Martin Equipment’s Cedar Rapids location serves Benton, Iowa, Johnson, Keokuk, Linn, Poweshiek, Tama and Washington counties.

An open house event is planned for 2026 to coincide with Martin Equipment’s 100-year partnership with John Deere. Customers and community members will have the opportunity to tour the new space, meet the team and learn more about expanded capabilities. Additional events will be shared in the coming months.

For more information, visit MartinEquipment.com.

PIRTEK LOUISVILLE LOUISVILLE, KY 40218 (502) 357-2300

PIRTEK BOLINGBROOK 181 W. CROSSROADS PKWY, STE. C BOLINGBROOK, IL 60440 (630) 755-5700

PIRTEK GURNEE 450 KELLER DR. PARK CITY, IL 60085 (847) 553-4224

PIRTEK MCKINLEY PARK 3440 S. ASHLAND AVE. CHICAGO, IL 60608 (773) 847-7393

PIRTEK O’HARE 1499 TONNE RD. ELK GROVE VILLAGE, IL 60007 (847) 640-7789

PIRTEK ROCKFORD 1500 E LINCOLN HWY. STE. 3 DEKALB, IL 60115 (815) 676-0960

PIRTEK SOUTH HOLLAND 17077-A WESTVIEW AVE. SOUTH HOLLAND, IL 60473 (708) 339-4673

PIRTEK CEDAR RAPIDS 2301 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 360-4900

PIRTEK QUAD CITIES WEST DAVENPORT, IA (563) 202-1621

PIRTEK MERRILLVILLE 90 W. 79TH AVE. MERRILLVILLE, IN 46410 (219) 771-1794

PIRTEK PERRY 2154 S LYNHURST DR. INDIANAPOLIS, IN 46241 (317) 252-0120

PIRTEK PIKE 4219 WEST 96TH ST. INDIANAPOLIS, IN 46268 (317) 252-0120

OHIO

PIRTEK COLUMBUS NORTH COLUMBUS, OH (380) 203-0860

PIRTEK COLUMBUS SOUTH 1671 TAYLOR RD. GAHANNA, OH 43230 (380) 203-0077

PIRTEK ELYRIA 606 LEONA ST. ELYRIA, OH 44035 (440) 595-8233

PIRTEK TOLEDO 1205 S REYNOLDS RD. TOLEDO,

Martin Equipment has completed construction on its new facility in Cedar Rapids, Iowa.

Martin Equipment photo

Martin Equipment’s Cedar Rapids location serves Benton, Iowa, Johnson, Keokuk, Linn, Poweshiek, Tama and Washington counties.

Martin Equipment photo

An open house event is planned for 2026 to coincide with Martin Equipment’s 100-year partnership with John Deere.

Martin Equipment is a fourth-generation, family-owned John Deere Construction & Forestry dealer.

Martin Equipment photo

PIRTEK AUBURN HILLS

2285 N. OPDYKE RD. STE. D AUBURN HILLS, MI 48326 (248) 997-4800

PIRTEK BATTLE CREEK BATTLE CREEK, MI (269) 832-0488

PIRTEK FLINT

4180 PIER NORTH RD., STE A FLINT, MI 48504 (810) 207-0001

PIRTEK GRAND RAPIDS 3504 ROGER B CHAFFEE MEMORIAL DR. GRAND RAPIDS, MI 49548 (616) 323-3939

PIRTEK LANSING LANSING, MI MOBILE SERVICE AVAILABLE (517) 798-2010

PIRTEK MADISON HEIGHTS 25355 DEQUINDRE RD. MADISON HEIGHTS, MI 48071 (248) 336-8000

PIRTEK STERLING HEIGHTS 40020 MOUND RD. STERLING HEIGHTS, MI 48310 (586) 276-9100

PIRTEK WESTLAND 28540 VAN BORN RD. WESTLAND, MI 48186 (734) 728-7000

PIRTEK WIXOM 46985 ENTERPRISE CT. STE. 300 WIXOM, MI 48393 (517) 544-4300

PIRTEK BURNSVILLE 1409 CLIFF ROAD EAST BURNSVILLE, MN 55337 (952) 895-5400

PIRTEK MIDWAY 2125 ENERGY PARK DR. ST. PAUL, MN 55108 (651) 641-1414

PIRTEK PLYMOUTH 11350 HIGHWAY 55 PLYMOUTH, MN 55441 (763) 475-0475

PIRTEK FENTON 316 AXMINISTER DR. FENTON, MO 63026 (636) 600-1981

PIRTEK OVERLAND 9425 DIELMAN ROCK ISLAND INDUSTRIAL DR. OLIVETTE, MO 63132 (314) 423-4600

PIRTEK SPRINGFIELD

2835 E DIVISION ST., STE. K SPRINGFIELD, MO 65803 (417) 342-8075

PIRTEK ST. LOUIS ST. LOUIS, MO 63103 (314) 423-4603

PIRTEK LAKE WINNEBAGO OSHKOSH, WI 54901 (920) 777-4673

PIRTEK MADISON 6354 COPPS AVE. MONONA, WI 53716 (833) 623-4673

Bobcat Invests $4.8M to Renovate Bismarck, N.D., Facility

Bobcat Co. completed a $4.8 million renovation of its Bismarck, N.D., manufacturing facility, furthering its commitment to invest in its employees, operations and communities.

The project modernized 22,560 sq. ft. of shared spaces across the facility, including employee breakrooms, meeting areas, conference rooms and office spaces. With refreshed finishes, updated furnishings and a collaborative layout, the improvements reflect Bobcat’s design standards across its global footprint.

“At Bobcat, we believe investing in our facilities is an investment in our people and our future,” said Mike Ballweber, president, Doosan Bobcat North America Inc. “These renovations benefit everyone who works here. By creating modern, collaborative and welcoming spaces, we empower employees to push boundaries, spark new ideas and shape the future of our industry. North Dakota is not only our home — it’s the foundation of our growth and innovation.”

More than 700 professional and production employees work at the Bobcat Bismarck Manufacturing Facility, where excavators and aftermarket parts are manufactured. Bismarck also is home to the Bobcat Acceleration Center, a key

engineering facility and innovation hub for all Bobcat equipment distributed globally.

“The renovation has meaningfully enhanced both employee safety and overall productivity,” said Scott Zimmerman, Bobcat environmental health and safety manager. “From the outset, our design priorities centered on safety and security — with ergonomic workstations, collaborative workspaces and advanced warning

“At Bobcat, we believe investing in our facilities is an investment in our people and our future.”

lighting systems. The open office layout has also fostered stronger cross-departmental connection, improving communication and teamwork across daily planning, safety initiatives, operations and facility projects.”

The renovations complement Bobcat’s broader investment strategy in North Dakota and beyond. Over the last decade, the company has invested more than $82 million in its North Dakota facilities and nearly $260 million in its locations across the United States.

“The renovations at our Bismarck location are a testament to our commitment to continuous improvement and to the people who make Bobcat extraordinary,” Ballweber said.

The project was supported by Shultz + Associates Architects and Capital City Construction, with additional contributions from Skeels Electric, Advance Mechanical Inc., InterOffice Furniture, Connect Interiors LLC and Professional Install LLC.

In addition to its operations in Bismarck, Bobcat has an extensive presence throughout the United States, employing more than 5,000 people at offices, facilities and manufacturing operations across North America.

For more information, visit bobcat.com/na/en. 

Ozinga, Spitch Partner to Modernize Customer Support

Ozinga Bros. Inc., a fourth-generation, family-owned leader in concrete, bulk materials and logistics solutions, has partnered with Spitch US Corp., the United States subsidiary of Spitch AG, a global provider of Conversational Agentic AI, to modernize its customer support and IT operations with advanced Speech Analytics — laying the foundation for the upcoming Virtual Assistant adoption.

“We deeply value our partnership with Ozinga and see tremendous potential to drive innovation and efficiency at Ozinga and across the ready-mix concrete industry through our Conversational Agentic AI Platform,” said Piergiorgio Vittori, CEO of Spitch US Corp.

Ozinga faced the challenge of delivering real-time reporting and analytics across its distributed contact centers and IT help desks in both English and Spanish. By implementing Spitch Speech Analytics, the company centralized calls and voicemails into a single platform, gaining statistically significant visibility into customer sentiment.

The solution also highlights key ‘Wins’ — best practices

to replicate — and ‘Issues’ — areas for improvement such as additional agent training or recurring problem topics. These insights not only enhance live agent performance but also uncover opportunities for automation, paving the way for the next phase of Ozinga’s innovation journey.

“Spitch’s Speech Analytics has empowered us with key insights, enhancing productivity across our contact centers and IT Help Desk while elevating both customer and employee experience,” said Keith Onchuck, CIO of Ozinga Bros., Inc.

Key Benefits of Partnership:

• Increased efficiency — Optimized processes and resource allocation based on real customer interactions.

enables accurate performance evaluation across divisions and business lines.

• Actionable insights — Automated reporting on KPIs

• Enhanced experience — Sentiment analysis pinpoints service bottlenecks and provides actionable recommendations to improve both service quality and agent productivity. The platform also flags critical calls — such as those with low ratings or customer complaints — enabling faster resolution and a better overall customer experience

• Path to Automation — Analytics highlight opportunities for Virtual Assistant deployment, enabling 24/7 self-service while freeing agents to focus on high value interactions.

For more information, visit spitch.ai/. 

Spitch photo

Bobcat photo

Bobcat has completed a $4.8 million renovation of its Bismarck, N.D., manufacturing facility.

Mike Ballweber

Doosan Bobcat North America Inc.

BUCK & KNOBBY EQUIPMENT CO. www.buckandknobby.com

6220 West Sterns Road Building #2 Ottawa Lake, MI 49267 855-213-2825

Bruggink’s Inc. www.brugginks.com

7344 S. Frontage Road Sheboygan, WI 53081 920-564-6555

CONSTRUCTION MACHINERY COMPANY www.cmcky.com

2911 S English Station Rd Louisville, KY 40299 502-267-4020 6104 Sable Mill Court Jeffersonville, IN 47130 812-850-6160

2235 Ragu Drive Owensboro, KY 42303 270-683-2000

DITCH WITCH OF MINNESOTA & IOWA ditchwitchmnia.com

12826 Emery Way Shakopee, MN 55379 800-252-5811

1320 Frontier Drive Fergus Falls, MN 56537 800-492-4801

1520 Blue Sky Blvd. Huxley, IA 50124 515-685-3521

VERMEER MIDWEST vermeermidwest.com

2801 Beverly Drive Aurora, IL 60502 630-820-3030

1801 179th Street N. East Moline, IL 61244 309-751-9540

120 East Martin Drive Goodﬁeld, IL 61742 309-965-3300

915 Fournie Lane Collinsville, IL 62234 618-407-3860

621 Spirit Valley E. Drive Chesterﬁeld, MO 63005 636-532-2332

13402 Britton Park Rd. Fishers, IN 46038 317-842-1040

3310 W. Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494

3566 Citadel Circle Newburgh, IN 47630 812-490-4400

940 Garden Lane Fowlerville, MI 48836 800-336-3889

1098 Franklin Street Marne, MI 49435 616-677-5900

2319 Plum Valley Rd. NE Mancelona, MI 49659 231-258-1290

ILLINOIS

Atlas Bobcat

Elk Grove Village

847-678-3633 88-438-8014

Mokena 708-596-8050 888-438-8014

Wauconda 847-526-4255 888-438-8014

West Chicago 630-293-0606 888-438-8014

Yorkville 630-553-0150 888-438-8014 www.atlasbobcat.com

Bobcat of Champaign Champaign 217-607-1454 www.bobcatgdn.com

Bobcat of Marion Carterville 618-985-8920 www.bobcatgdn.com

Bobcat of Springfield Springfield 217-525-0349 www.bobcatgdn.com

Bobcat of St. Louis Fairview Heights 618-397-1847 www.bobcatgdn.com

Bobcat of Effingham Teutopolis 217-717-4550 www.bobcatgdn.com

Authorized Bobcat Dealers

INDIANA

Atlas Bobcat Merrillville 219-381-3006 www.atlasbobcat.com

Bobcat of Evansville Evansville 812-422-8200 www.bobcatgdn.com

Bobcat of Michiana Elkhart 574-584-7550 www.bobcatofmichiana.com

KENTUCKY

Bobcat of Bowling Green

Bowling Green 270-842-4253 www.bobcatgdn.com

MICHIGAN

Bobcat of Michiana Niles 269-210-2299 www.bobcatofmichiana.com

MISSOURI

Bobcat of Columbia Columbia 573-886-9435 www.bobcatgdn.com

Bobcat of St. Louis O’Fallon 636-240-9020 Valley Park 636-225-2900 www.bobcatgdn.com

MINNESOTA

Bobcat of Bemidji Bemidji 218-751-4660 www.goironhide.com

Farm-Rite Equipment, Inc.

Dassel 320-275-2737 888-679-4857

Long Prairie 866-514-0982 320-732-3715

St. Cloud 844-262-2281

Willmar 877-484-3211 www.farmriteequip.com

Lano Equipment, Inc. Anoka 763-323-1720 888-448-5266

Loretto 763-479-8200 888-479-4342

Shakopee 952-445-6310 877-753-6100 www.lanoequip.com

Lano Equipment of Norwood, Inc. Norwood Young America 952-467-2181 www.lanoequipofnorwood.com

MINNESOTA

Swanston Equipment

Bobcat of Alexandria

320-460-8773

Bobcat of Fergus Falls 218-739-4505 www.swanston.com

Tri-State Bobcat Burnsville 952-894-0894

Little Canada 651-407-3727 www.tristatebobcat.com

NORTH DAKOTA

Bobcat of Devils Lake Devils Lake 701-662-5331

www.goironhide.com

Swanston Equipment

Bobcat of Fargo 701-293-7325

Bobcat of Minot 701-837-9901 www.swanston.com

Bobcat of Grand Forks Grand Forks 701-772-5006 www.goironhide.com

Bobcat of Williston Williston 701-572-5050 www.goironhide.com

WISCONSIN

Tri-State Bobcat Hudson 715-531-0801

New Location! 2018 US Hwy 8 St. Croix Falls, WI 715-557-6010 www.tristatebobcat.com

MDOT’s U.S. 127 Project Includes 18 Bridges, Two Box Culverts

the northwest part of Michigan. Likewise, if they’re coming through the corridor west to east or east to west, 96 is how they travel. So, there’s a lot of impacts not just for the community surrounding the project, but the motorists that come through.”

The project, which was awarded to Toebe Construction, began in 2023 with the maintenance of traffic (MOT) plan. Construction on the northbound lanes began in 2024. The 3.7-mi. stretch includes 18 bridge structures, plus two large box culverts — one 8 by 8 ft., the other 14 by 10 ft. — beneath the interstate. The northbound work has been completed and work on the southbound lanes is

ongoing. Work on about half of the structures has been completed. Of the 18, six need full reconstruction and the others partial reconstruction or rehabilitation.

“One of the main upgrades is we’re adding a third lane for the majority of the stretch of the project,” Gembel said. “All of the structures that are in between the southernmost part of the project and right up by the Trowbridge area needed to be widened, and so we’re basically adding a beam line on each of them. And then, obviously, you reconstruct that portion of the deck. We want to upgrade and rehabilitate the rest of the deck, and anything else that relatively warrants it. And then once we get up around the Trowbridge area, which is kind of a segue way into Michigan State University, and

right where 127 splits off to Lansing, all those structures have come to the end of what you consider their service life. So, nearly all of those are being reconstructed, including the big ramp that goes into MSU. Those are full reconstructs.”

The biggest challenge on the project is that it intersects with two major freeways on both ends with half of the ramps closed at any given time, Gembel said. That raises a lot of questions from travelers about the project and their restricted access. The best way to deal with the challenges is to make sure MDOT gets the word out about the project early and keeps the communication lines open during the project, he said.

“I think our partnership with the contractors made the project move just about as well

as you could ask,” he said. “For the rest of us, it became almost the predominant workload to make sure that we’re satisfying what the public wants to see during construction. Being able to explain the why has always been the biggest challenge. I was very fortunate last year that the project, from a constructability standpoint, was running fluid.”

While there is nothing particularly unusual or unique about the project, one notable aspect that everyone seems to notice is the equipment, Gembel said.

“There is every piece of equipment that you can want for any build out there. This project has just about every element you can have in a construction project. We have huge culverts. We have structural rehabilitation, structural reconstruction. There’s both HMA [hot mix asphalt] and concrete. Although it is a concrete project, our maintenance of traffic is all HMA, so it’s a significant amount of HMA construction. I couldn’t tell you how many cranes they had out there, but there’s a lot, and last year, it was kind of a spectacle. It really made it look fantastic when you went through there ... I don’t know that there’s a piece of equipment that wasn’t used.”

Following the completion of this project, two additional projects are planned. The next project, rebuilding U.S. 127 from Lake Lansing Road to I-69, will go out for bid in the fall, and the third, rebuilding U.S.127 from I-496 to Lake Lansing Road, is expected to take place in 2027-2028.

The projects are part of the state’s Rebuilding Michigan program “to rebuild the state highways and bridges that are critical to the state’s economy and carry the most traffic. The investment strategy is aimed at fixes that result in longer useful lives and improves the condition of the state’s infrastructure.”  CEG

The improvement project on U.S. 127 between Interstates 496 and 69 is taking place in a heavily trafficked area that traverses the state capitol in Lansing to the west and Michigan State University in East Lansing to the east

Michigan DOT photo

The project, which was awarded to Toebe Construction, began in 2023 with the maintenance of traffic (MOT) plan.

Michigan DOT photo

Construction on the northbound lanes began in 2024. The 3.7-mi. stretch includes 18 bridge structures, plus two large box culverts — one 8 by 8 ft., the other 14 by 10 ft. — beneath the interstate.

Michigan DOT photo

Of the 18 bridges, six need full reconstruction and the others partial reconstruction or rehabilitation.

MDOT from page 1

SECTIONPaving

Efficient Technologies Meet Quality Demands Head-On

Road construction contractors must meet increasingly stringent environmental and quality standards in asphalt paving, while remaining competitive.

With InLine Pave and SprayJet, road paver specialist Vögele offers two methods that enable faster and more efficient realization of paving projects with lower overall costs.

Technologies

Project completion deadlines in road construction are tight, especially when they involve the construction or rehabilitation of busy arterial roads. At the same time, contracting authorities demand the very best in paving quality.

Additional pressures arise from stricter environmental requirements and calls for resourcefriendly construction methods — while construction contractors struggle with constantly rising material and labor costs.

InLine Pave and SprayJet technologies are designed to counter these problems, according to Vögele. The two paving methods are suitable for a wide range of applications and have a proven

“Hot on hot” — when using the InLine Pave method from Vögele, the binder course and the surface layer are paved in a single pass.

track record earned in years of successful use around the globe, according to Vögele.

Binder Course, Surface Layer in Single Pass

The InLine Pave concept is particularly suitable for the construction and rehabilitation of freeways and expressways — as well as wherever roads need to be reopened to traffic again as soon as possible, according to Vögele.

The machines work “in-line”, one behind the other, whereby the mobile feeder is loaded with the binder course or surface layer mix

and transfers it to the Super 21003(i) IP binder course paver.

With its AB 600 TP2 Plus highcompaction screed, this machine is the key component of the paving train: during the paving process, the screed compacts the binder course to values of up to 98 percent, a level that is so high that the surface layer paver can follow on behind it without damaging the freshly-paved binder course.

The paver for the binder course also features a special material transfer module that transports the surface layer material directly into the material

machine in the train — a Super 1800 Dash 3 or Dash 5 generation paver — which then paves the surface layer.

Sustainable, High-Quality Asphalt Pavement

“Hot on hot” paving offers a number of advantages: optimal interlocking of the binder course and surface layer increases the quality and service lifetime of the surface layer. It allows a reduction of the proportion of surface layer to binder course material, according to Vögele.

Vögele photo

DePere, WI 920/532-0165

Deforest, WI 608/842-4151

Franksville, WI 262/835-2710

Schofield, WI 715/355-9898

Slinger, WI 262/644-7500

www.rolandmachinery.com

Eau Clair, WI 715/874-5400

Escanaba, MI 906/786-6920

Springfield, IL 217/789-7711

Carterville, IL 618/985-3399

East Peoria, IL 309/694-3764

Bridgeton, MO 314/291-1330

Cape Girardeau, MO 573/334-5252

Columbia, MO 573/814-0083

Palmyra, MO

573/769-2056

3001 Oxbow Court SW Bondurant, IA 50035

515/282-0404

800/555-1445

10740 High Life Court SW Cedar Rapids, IA 52404

319/363-9655

800/616-6615

1400 North Hwy 75 Sioux City, IA 51105

712/252-0538

800/633-9104

3150 5th Ave.

East Moline, IL 61244

309/755-7203

800/633-9114

Cambridge, OH

740-432-6303

Evansville, IN 812-476-7321

Fort Wayne, IN 260-483-8868

Indianapolis, IN 317-872-4877

Burlington, KY 859-586-6133

Holt, MI 517-694-0471

Novi, MI 248-349-9922 Brilliant, OH 740-598-3400 Brunswick, OH 330-225-6511

Dublin, OH 614-889-1073

Gallipolis, OH 740-446-3910

Heath, OH 740-522-3500

Mansfield, OH 419-529-4848

Marietta, OH 740-374-7479

Mentor, OH 440-255-6300

Monroe, OH 513-539-9214

North Canton, OH 330-494-3950 Perrysburg, OH 419-874-0331

5105 Loraine Street Detroit, MI 48208 313-710-6908

56195 Pontiac Trail New Hudson, MI 48165 248-665-8488

G 3283 S Dort Hwy Burton, MI 48529 810-484-0669

3725 Old 27 S. Gaylord, MI 49735 888-928-4485 1061 Stepke Court Traverse City, MI 49685 231-642-9637

2917 Ashmun Street Sault Sainte Marie, MI 49783 888-348-1953

8840 Byron Commerce Dr SW Byron Center, MI 49315 616-345-5499

18405 115th Avenue Orland Park, IL 60467 888-508-3903

420 Nolen Drive South Elgin, IL 60177 888-658-4890

2500 Westward Drive Spring Grove, IL 60081 815-581-9819

613 E Stevenson Road Ottawa, IL 61350 815-587-7399

1035 Wylie Drive Bloomington, IL 61705 309-808-6602

www.cpower.com 4501 West Irving Wichita, KS 67209 316-943-1231

1285 Acraway Garden City, KS 67846 620-765-3118

1944-B North 9th Street Salina, KS 67401 785-825-8291

1920 Thielen Avenue Colby, KS 67701 785-462-8286

3305 S West Street Wichita, KS 67217 316-789-7370

1900 Plumbers Way Liberty, MO 64068 806-415-6700

Madison (Sun Prairie) 1900 W. Main St. Sun Prairie, WI 53590 608-837-5141 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790

Green Bay (De Pere) 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711

La Crosse (West Salem) 451 W. Avenue N. West Salem, WI 54669 608-786-2644

Stevens Point (Plover) 5429 Prairie Dr. Plover, WI 54467 715-254-2777

Racine (Mount Pleasant) 1609 SE Frontage Rd. Mt. Pleasant, WI 53177 262-898-6700

2900 Bicycle Street Sparta, WI 54656 608-351-2101

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 4923 Rockwell Road Winchester, KY 40391 859-759-4404

6104 Sable Mill Court Jeffersonville, IN 47130 812-850-6160

LeeBoy Introduces 8680 Asphalt Paver

LeeBoy photo

The 8680 has a 210 hp Kubota Tier IV diesel engine paired with a four-speed drive system, capable of going 6 mph. To connect that power to any kind of terrain, the paver features high-speed smooth rubber tracks with oscillating bogeys, which allow for easy maneuverability.

photo

LeeBoy introduced its 8680 asphalt paver, which is designed to meet the demands of heavy commercial and main line contractors.

Increased Capacity, New Features

The 8680 has two screed options, the LB5 screed, which weighs 5,400 lbs., and the LB7 screed, which carries up to 7,400 lbs.

The 8680 offers a range of new updated features, including taller hopper wings to accommodate the new hopper capacity of 15-tons compared with 12.5-tons on the original design. A hydraulic lift, front apron and a 16-in. auger with no cut-off are some other notable features being introduced on the 8680. The 8680 also features optional power outlets and a pole to accommodate balloon lights. Along with these new features, the 8680 LB7 also features a streamlined control box, with easy access to a lever for extension, controls for the auger and conveyer and pile height settings.

“We experienced over 91 percent compaction with most

LeeBoy photo

The 8680 has two screed options, the LB5 screed, which weighs 5,400 lbs., and the LB7 screed, which carries up to 7,400 lbs.

mixes,” said Chris Broome, senior product manager of LeeBoy. “The LB7 is big enough and heavy enough to get the job done.”

Some more performance features of the 8680 include:

• paving widths up to 15 ft., 6 in.;

• dual electronic steering and adjustable operator platforms;

• two 18-in. feeding conveyers;

• hydraulic extending power tunnels;

• automatic temperature control (ATC); and

• actuator driven lift hood

Power, Precision for Any Task

AIS CONSTRUCTION EQUIPMENT

www.aisequip.com

Grand Rapids, MI 616-538-2400 Lenox, MI 586-727-7502 Williamsburg, MI 231-267-5060 Lansing, MI 517-321-8000 Bridgeport, MI 989-777-0090

New Hudson, MI 248-437-8121

MURPHY TRACTOR & EQUIPMENT CO., INC.

www.murphytractor.com

Park City, KS

316-942-1457

Great Bend, KS 620-792-2748 Topeka, KS 785-233-0556 Ulysses, KS 620-356-1071 Dodge City, KS 620-227-3139 Gering, NE 308-436-2177 Omaha, NE 402-894-1899 Lincoln, NE 402-467-1300 Grand Island, NE 308-381-0741 North Platte, NE 308-534-7020 Kansas City, MO 816-483-5000 Springﬁeld, MO 417-863-1000

Des Moines, IA 515-263-0055 Fort Dodge, IA 515-576-3184 Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085

LeeBoy

A Workhorse To Depend On

High Performance, Quality Results

The CP100II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100 horsepower engine, an array of configurations and the class-leading Carlson EZCSS single slide screed, it’s easy to see why the CP100II is the ideal choice for heavy-duty commercial paving.

The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of conﬁgurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.

www.brandeismachinery.com www.rolandmachinery.com

Springfield, IL

217/789-7711

Carterville, IL

618/985-3399

East Peoria, IL

309/694-3764

Portage, IN

219/764-8080

Bridgeton, MO

314/291-1330

Cape Girardeau, MO

573/334-5252

Columbia, MO

573/814-0083

Palmyra, MO

573/769-2056

Eau Claire, WI 715/874-5400

DePere, WI 920/532-0165

Deforest, WI 608/842-4151

Franksville, WI 262/835-2710

Schofield, WI 715/355-9898

Slinger, WI 262/644-7500

2600 S. Lincoln Rd. Escanaba, MI 906/786-6920

17000 Highway 41 N Evansville, IN 47725 812/425-4491

7310 Venture Lane Ft. Wayne, IN 46818 260/489-4551 8410 Zionsville Road Indianapolis, IN 46268 317/872-8410 1801 Watterson Trail Louisville, KY 40299 502/491-4000

1484 American Greeting Card Road Corbin, KY 40701 606/528-3700

1389 Cahill Drive Lexington, KY 40504 859/259-3456

160 County Park Road Paducah, KY 42001 270/444-8390

130 Mare Creek road Stanville, KY 41659 606/478-9201

535 Modern Way Bowling Green, KY 42101 270/780-3004

www.rmsequipment.com

5633 W Hwy 13 Savage, MN 55378

952/895-9595

800/888-9515

Rochester, MN 507/701-0199

Duluth, MN 218/727-8611

800/888-9535

Virginia, MN 218/741-9011 800/752-4304

Sioux City, IA 217/252-0538 800/633-9104

Des Moines, IA 515/282-0404 800/555-1445

Cedar Rapids, IA 319/363-9655 800/616-6615

East Moline, IL 309/755-7203 800/633-9114

www.casey-equipment.com

1603 East Algonquin Rd. Arlington Heights, IL 60005

847/437-8686

16754 New Ave. Lemont, IL 60439 630/257-1261

1548 Huntwood Drive

Cherry Valley, IL 61016 815/332-8222

www.rmsrentals.com

12520 Quentin Ave S. Suite 100

Savage, MN 55378

952/895-9595

800/888-9515

Vögele Technologies Help Boost Asphalt Quality, Cut Costs, Reduce Emissions

Vögele photo

When using the InLine Pave method from Vögele, the paving train consists of three machines following one behind the other — a mobile feeder, the paver for the binder course and the paver for the surface layer.

TECHNOLOGY from page 53

This improves the stability of the pavement thanks to the higher proportion of the stable binder course and prevents deformation. A smaller amount of costly asphalt surface layer material is required. In contrast to conventional paving, there is no need for spraying with bitumen emulsion as a tack coat — this saves material and working time while also reducing CO₂ emissions, according to Vögele.

SprayJet Technology

If the renewal of a surface layer is required, paving thin layers hot over a spray seal is a low-cost, efficient and resource-friendly technology.

With the Super 1800-3(i) SprayJet, Vögele offers a special spray paver that has a track record on projects around the globe, according to Vögele. It sprays bitumen emulsion onto the old pavement and paves the new surface layer over it in a single pass.

The five spray bars with a total of 24 nozzles enable seamless application of the bitumen emulsion over varying paving widths of up to 20 ft. As the SprayJet module is a self-contained functional unit, it also allows the use of the Super 1800-3(i) SprayJet in the role of a classic road paver. The module is easy to maintain and is logically integrated in the Vögele ErgoPlus 3 operating concept, according to Vögele.

Higher Paving Speed, Quality

SprayJet technology is efficient and is suitable for all paved surfaces used

Vögele photo

Efficient, low-cost rehabilitation of surface layers — the Super 1800-3(i) SprayJet from Vögele sprays bitumen emulsion onto the old pavement and paves the new surface layer over it in a single pass.

by traffic. The paving speed is often significantly higher than in conventional paving scenarios and, as the layer thickness is generally .78 in. rather than the usual 1.57 in., this also means potential savings of up to 50 percent of the surface layer material otherwise required, according to Vögele.

The use of the SprayJet method also brings numerous benefits with regard to quality. As spraying the emulsion and paving the surface layer take place in a single pass, the binding agent film cannot be inadvertently driven over and damaged by other construction vehicles, according to Vögele.

The binding agent film seals the entire lower layer and provides an effective barrier against water. This fur-

ther increases the service life of the road, according to Vögele.

Two Methods for All Paving Requirements

Whether for rehabilitation, construction from new, or inner-city construction projects, with In-Line Pave and SprayJet, Vögele offers two technologies that take both the challenges faced by road construction contractors and their clients’ specific requirements into account. Faster, more efficient and more sustainable road construction or rehabilitation; the use of less material and conservation of resources; and the realization of high-quality asphalt pavement surfaces, according to Vögele. 

4344 Poplar Level Road Louisville, KY 40213 502-456-4050 Indianapolis, IN 317-247-9125 Clearfield, PA 814-765-8500

Evansville, IN 812-867-6661

Fort Wayne, IN 260-482-3681

Prestonsburg, KY 606-874-2104

St. Louis, MO 314-487-8925 Columbus, OH 614-636-4050 Cinncinnati, OH 513-321-7833

Nitro/Charleston, WV 304-755-7788

Twinsburg (Cleveland), OH 216-393-7833

Pittsburgh/Leetsdale, PA 412-741-1731

JCB’s CT380, CT430 Tandem Rollers Meet Paving Demands

JCB photo

With the addition of the CT380 and CT430, JCB has expanded its tandem roller lineup to four models, providing versatile options to match the diverse needs of American job sites.

JCB continues to invest in American infrastructure and innovation with the introduction of the CT380 and CT430 vibratory tandem rollers at Pave-X 2025.

Designed to meet the demands of U.S. paving professionals, these high-performance machines represent JCB’s dedication to delivering robust, dependable solutions for asphalt paving and site preparation, the company said.

“Our new rollers underscore JCB’s longterm investment in North America,” said James Gill, JCB product manager. “From our new manufacturing facility going up in San Antonio to the launch of products like the CT380 and CT430, we are laser-focused on meeting the needs of U.S. contractors with machines that are reliable, easy to operate and built to perform.”

With the addition of the CT380 and CT430, JCB has expanded its tandem roller lineup to four models, providing versatile options to match the diverse needs of American job sites. The lineup, which also includes the compact CT160 and mid-size CT260, ensures that contractors have the right tools for any paving or compaction task, whether working on tight urban spaces or large-scale infrastructure projects.

High-Performance Solutions for American Paving

The CT380 and CT430 are equipped with features to tackle the toughest jobs, offering reliable compaction and operator-focused design, with:

• Versatile Compaction Power: Dualdrum widths of 51 in. (CT380) and 55 in.

(CT430) deliver centrifugal forces of up to 13,800 lbs. and 14,600 lbs. per drum, ensuring superior compaction.

• Efficient Operation: Both models feature maximum travel speeds of 6.2 mph, enabling swift, efficient movement across work sites.

• Exceptional Maneuverability: With a ±34-degree steering angle and ±13-degree oscillation angle, the rollers navigate tight turns and uneven terrain with ease.

• Operator-Centric Design: Adjustable seats, intuitive controls and exceptional visibility reduce fatigue and enhance operator productivity.

• Low Maintenance, High Uptime: Simplified service points and reduced maintenance intervals keep machines on the job longer.

• Smart Security: JCB LiveLink telematics provides advanced tracking and monitoring for added peace of mind.

Tested Reliability for American Work Sites

Powered by efficient 48.9-hp, 3-cylinder engines, the CT380 and CT430 are built to handle rigorous daily use. Their operating weights — 8,820 lbs. and 9,920 lbs. respectively — strike a balance between easy transport and heavy-duty performance.

“Our philosophy is robust simplicity,” Gill explained. “These machines are easy to operate, easy to maintain and ready to work whenever you are. That’s what makes the CT380 and CT430 invaluable on American job sites.”

For more information, visit www.jcb.com. 

Bemidji, MN 218-751-1033

Brainerd, MN 218-829-9800

Buhl, MN 218-258-3232

Columbus, MN 651-982-5600

Crookston, MN 218-281-4245

Duluth, MN 218-722-6628

Fergus Falls, MN 218-736-2680

Jackson, MN 507-847-7600

Madison, MN 320-598-3150

Mankato, MN 507-388-1444

Marshall, MN 507-532-4403

Minneapolis, MN 952-888-4121

ZieglerCAT.com

Rochester, MN 507-285-1775

Shakopee, MN 952-887-4570

St. Cloud, MN 320-253-2234

Wilmar, MN 320-235-8123

Altoona, IA 515-957-3828

Atlantic, IA 712-243-1039

OhioCat.com

Broadview Heights, OH 440-526-6200 440-658-2000 (Rental) Cadiz, OH 740-942-4626 740-942-6100 (Rental) Canton, OH 330-244-2444 Cincinnati, OH 513-771-0515 513-612-5600 (Rental)

Columbus, OH 614-878-2287 614-851-3737 (Rental) Lima, OH 567-242-6860 (Rental) Perrysburg, OH 419-874-7975

419-872-7368 (Rental) Troy, OH 937-335-7660 937-440-2900 (Rental) Upper Sandusky, OH 419-731-2170 419-731-2060 (Rental)

www.boydcat.com

Evansville, IN 812-425-4651

Jeffersonville, IN 812-284-1217

Ashland, KY 606-928-3444

Bowling Green, KY 270-843-3275

Brandenburg, KY 502-775-2660

Corbin, KY 606-528-3140

Fenton, MO 636-343-5900 Cape Girardeau, MO 573-332-1122

Columbia, MO 573-442-6880

Foristell, MO 636-673-2530

Joplin, MO 417-624-3010 Springfield, MO 417-866-6651

Fort Dodge, IA 515-576-3161

Mason City, IA 641-423-7240

New Hampton, IA 641-394-4226

Postville, IA 563-864-7461

Sheldon, IA 712-324-5604

Sioux City, IA 712-252-4401

Washington Court House, OH 740-636-2429

740-636-2430 (Rental) Westerville, OH 614-948-2828 (Rental)

Youngstown, OH 330-530-9010

330-799-1800 (Rental) Zanesville, OH 740-453-0563

740-455-8400 (Rental) Richwood, KY 859-372-4665 859-282-4343 (Rental)

Dry Ridge, KY 859-823-1500

Elizabethtown, KY 270-769-1300

Hopkinsville, KY 270-885-1700

Lexington, KY 859-254-2756

Jeffersontown, KY 502-244-5700

Louisville, KY 502-774-4441

Paducah, KY 270-443-3631

fabickcat.com

Willow Springs, MO 636-680-1359

Salem, IL 618-548-1400

Mt. Carmel, IL 636-680-1514

Troy, IL 636-660-0029

Milwaukee, WI 414-461-9100

Eau Claire, WI 715-874-5100

Pikeville, KY

606-437-6265

Jackson, OH 740-286-7566

Belle, WV 304-949-6400

Crab Orchard, WV 304-253-2706

Nitro, WV 304-759-6400

Parkersburg, WV 304-424-0200

Green Bay, WI 920-498-8000

La Crosse, WI 608-783-4891

Madison, WI 608-271-6200

Superior, WI 715-398-9696

Wausau, WI 715-359-6220

Marquette, MI 906-475-4191

RAISSING THE STANDARD IIN

Power Curbers Cos. Acquires Miller Formless Paving Systems

Power Curbers Cos. announced the acquisition of Miller Formless Systems.

The acquisition was finalized on Aug. 29, 2025, marking a significant milestone in the continued growth of both organizations.

Founded in 1970, Miller Formless has a long history of manufacturing slipform machines that have served contractors worldwide. By joining forces with Power Curbers Cos. home to the Power Curbers, Power Pavers and Anvil American brands, this acquisition strengthens the combined company’s market leadership, expands product offerings and enhances service and support for customers worldwide.

Miller Formless will continue to operate under its own brand name. Power Curbers Cos. remains committed to preserving the company’s legacy while introducing operational efficiencies that will benefit customers in the areas of machine delivery, parts availability and after-sales support, according to Power Curbers.

“This acquisition represents more than just growth- it’s about uniting two businesses that share a deep commitment to quality and customer success,” said Stephen Bullock,

president of Power Curbers Cos. “Miller Formless has been a trusted name in the industry for over five decades, and we are honored to carry that legacy forward while offering an even greater range of solutions to contractors.”

Together, Power Curbers, Power Pavers, Anvil American and Miller Formless will now provide contractors with a comprehensive lineup of concrete paving solutions, from extruded curb machines to mainline highway pavers.

“We’re thrilled to couple the 5700-D multi-purpose machine, the compact M1000 and the M8800 barrier machine, giving contractors an unmatched lineup of machines designed to meet a wide range of project needs,” said Bullock. 

computer, 12 ft spray bar, diesel burners, Freightliner M2, Cummins 6.7L dse eng, auto trans, front tires new- $149,000

2016 Rosco Max 2B distributor, 1950 gallons, Max 2B computer, 12 ft spray bar, diesel burners, INTL 4400, Cummins 6.7L dsl eng, auto trans - $130,000

2022 Volvo PT125C pneumatic roller, 9 wheels, Volvo dsl eng, water system, 365 hrs $62,000

2014 Bomag BW11RH pneumatic roller, 9 wheels, Cummins 3.3L dsl eng, water system, 2221 hrs $29,000

New Marathon TPS250PT tack distributor, Briggs 5 hp gas eng, 18GPM pump, 250 gal, spray wand w/50 ft hose, hose reel, 6 ft spray bar, Recirculation plumbing, 12 gal waste recovery tank, propane burners, ﬂushing system w/10 gal tank - $22,550

2019 Weiler P385B track paver, 8-16 ft electric heated vibratory screed, 9 ton hopper, Cat dsl eng, steel tracks 70% - $69,000

Power

Bobcat of St. Louis Open House Includes Rental,

LOUIS from page 14

Joe Doneff of Bobcat of St. Louis shows Robert Battle of St. Louis city the specs on these Bobcat T770 and Bobcat T740 compact track loaders.

(L-R): Joe Kelpe, Casey

and Tony

all of Budrovich Companies, enjoyed lunch at the Bobcat of St. Louis open house.

Bobcat of St. Louis hosted an open house customer appreciation event at its facility in Valley Park, Mo., on Oct. 9, 2025.

Hodges

Pona,

(L-R): Looking over a Bobcat T550 compact track loader are Jimmy Tashia of Onsite Wrenching; Ryan Borrini; Cody Stark of Spirtas Wrecking Co.; and Tyler Jamirson of Spirtas Wrecking Co.

ST.

1st CHOICE EQUIPMENT LLC www.1stchoiceequipment.com

1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

ABC EQUIPMENT RENTAL & SALES www.abcequipment.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

38525 Chester Rd. Avon, OH 44011 440/934-7368

kubotacentral.com 1285 Acraway Street Garden City, KS 67846 620/765-3118

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com

2329 Performance Way Columbus, OH 43207 614/443-6541 12500 Williams Road Perrysburg, OH 43551 419/872-7101

7570 New Carlisle Pike Dayton, OH 45424 937/879-3154

7225 Grand Ave. Gurnee, IL 60031 224/699-2200

1966 N State Rt. 1 Watseka, IL 60970 815/432-3965 4620 W US-6 Morris, IL 60450 815/942-6620 21730 LaGrange Rd Frankfort, IL 60423 815/658-2682 McCullough Kubota www.mckubota.com

LANO EQUIPMENT www.lanoequip.com

6140 Highway 10 NW Anoka, MN 55303 763/323-1720 23580 Highway 55 Loretto, MN 55357 763/479-8200

3021 West 133rd Street Shakopee, MN 55379 952/445-6310 YES EQUIPMENT & SERVICES www.yesequipment.com

AI Infrastructure Boom Spurs Demand for Site Prep Work

With the federal government’s seal of approval, centers continue to be designed and built across the country.

That drive to lead the AI infrastructure race creates many opportunities not only for building contractors but for contractors whose focus is earthwork and site prep. Depending on the scale of the facility, this pre-construction phase can be a considerable undertaking, according to construction software provider Autodesk.

“The site is levelled and cleared to prepare it for construction, then excavations for footings, utility and infrastructure placement begin,” it said.

“Construction begins on sub-floors, and electrical grounding grids are laid to protect equipment,” added Autodesk in a blog post.

Site development contractor Muller said the demand for reliable data storage and processing has skyrocketed in recent years. Businesses, government agencies and institutions all rely on data centers to power their operations, the company noted.

As the foundation of the digital economy, data centers require meticulous planning and construction to ensure long-term reliability and performance, it said.

“Building a data center is a complex endeavor that involves multiple considerations.”

That includes every phase, “from site selection to utility installation, and from erosion control to regulatory compliance.”

Data Centers On Hyper Scale

The size of the digital facility determines the intensity and detail of the pre-construction phase. A chosen site is leveled and cleared for footings, utility and infrastructure placement.

Whether the project is for a co-location, cloud or enterprise data center, defining the type and purpose of the facility early on is essential, said the contractor.

“Is it meant to serve a local region, a specific company or a global network? Will it need to expand in the future to accommodate growing storage demands?”

The ideal data center should meet both current and future requirements, said Muller. A critical part of this process involves determining the scalability needs.

This process also should ensure that the design can accommodate growth without disrupting the data center’s operations, it said.

“Additionally, compliance with standards for security, energy efficiency and environmental impact is essential, particularly for government and military projects.”

Budgeting is a crucial part of any construction project, but data centers require special attention due to their scale and complexity, said the company.

A provider of equipment to contractors who specialize in site prep work, Sunbelt wrote in a blog post that new data centers are more than just big buildings.

“They have redundant HVAC systems designed to keep everything cool and dry and backup generators to keep things running in case of a power failure.”

Companies have to factor the effects of climate change into the design and location of new AI centers, Sunbelt continued.

Can it be cooled if average temperatures rise? Must the structure be hardened against extreme weather? Is there reliable, long-term

The North American “hyperscale” data center market is set to grow from $9 billion in 2022 to more than $20 billion in 2025, according to Sunbelt Rentals.

water and power?

“These are questions that affect every phase of construction from design to commissioning,” wrote Sunbelt in a walk though of data center construction phases.

The company suggests that planning helps in ensuring stakeholders have what they need to keep the project on schedule and within budget.

“The first step in any successful data center project is clearly defining the data center design and construction objectives,” said Muller. “This involves understanding the scope of the project, the expected future capacity, and the necessary compliance and security standards.”

“Balancing the budget with the long-term operational needs of the data center facilities is essential to ensuring that the project remains sustainable and efficient over time.”

Choosing the right location for a data center is one of the most critical factors for longterm business success, said Muller.

The site, it said, must meet specific requirements to ensure the data center’s smooth operation and ability to handle expansions.

“A data center requires more than just a large plot of land,” said Muller. “You need to evaluate the proximity to power sources and fiber networks.” see AI page 84

Adding Innovation to Site Preparation

As AI expansive data centers become more visible in communities across the country, contractors are staying busy.

In Louisiana, the Richland Parish Data Center project is taking shape with the help of drones outfitted with innovative scanning technology.

Mortenson Construction addressed the issue of underground hazards, including high-pressure gas lines and abandoned wells with the technology. The MagArrow Scan technology uses drones equipped with advanced sensors to detect abnormalities in the earth’s magnetic field.

“This bold, new approach allowed the team to locate metal objects deep underground, such as gas lines and old wells,” said Mortenson.

These structures might not be documented or easily found through traditional locating methods, the construction company explained.

“The accuracy of the scan was a lot more detailed than I thought it was going to be,” said Brian Nelson, senior superintendent II.

According to Mortenson, the scan not only uncovered this hidden gas line but also validated the locations of old irrigation and gas wells.

The irrigation and gas wells were previously inaccurately mapped, so the precision of the scan significantly narrowed down these locations.

Mortenson said it acts as a vital safety check, preventing accidents that could seriously endanger team members and disrupt projects.

“In addition to the scan, the project also employed innovative solutions,” said the construction contractor.

Bridges were installed to allow large equipment to safely traverse over gas lines without applying pressure directly over the gas line.

The pressure could have caused disruptions to the

gas lines, resulting in leaks or more catastrophic events.

Mortenson said the scan gave the team the precise location to place the bridges.

Jopy Willis, Mortenson general superintendent, described the bridges as multifaceted.

“We’re using them not only to navigate over gas lines but also to cross wetlands, ensuring that our logistics remain efficient and safe.”

The drone scanner’s ability to detect these hazards is not just about safety; it's about efficiency and accuracy, added Mortenson.

“By identifying these underground features, construction teams can plan their projects with greater confidence.”

That’s because these teams know they won't inadvertently hit something dangerous underground.

“This proactive approach to safety and planning is a testament to our team’s commitment to innovation and the well-being of its workers.”

650M

16,936 (7,682) FPT F5C F5HFL463D*G003

68 (50.6) 15,931 (7,226) FPT F5C F5HFL463D*G003

650M WT 68 (50.6) 16,457 (7,464) FPT F5C F5HFL463D*G003

750M LGP 92 (69) 21,005 (9,527) FPT F5HFL413J*A002

750M WT 92 (69) 20,756 (9,414) FPT F5HFL413J*A002

750M LT 92 (69) 20,168 (9,148) FPT F5HFL413J*A002

850M

(10,627)

(10,366)

(14,915) FPT F4HFE613F*A002 1150M

KOMATSU

D65EX-18 WH 217 (162)

CATERPILLAR

(22,830) Komatsu SAA6D114E-6

(23,165) Komatsu SAA6D114E-6

D65PX-18 WH 217 (162) 53,136 (24,102) Komatsu SAA6D114E-6

D65WX-18

D71EX-24

D71EXi-24

(177 )

(22,600) Komatsu SAA6D114E-6

(23,100) Komatsu SAA6D114E-6

D71PXi-24 237 (177 ) 51,147 (23,200) Komatsu SAA6D114E-6

D85EX-18 264 (197) 67,615 (30,670) Komatsu SAA6D125E-7

D85EXi-18

D85PX-18

D85PXi-18

(197)

(31,000) Komatsu SAA6D125E-7

(29,700) Komatsu SAA6D125E-7

D85EX-18 WH 264 (197) 70,718 (32,077) Komatsu SAA6D125E-7

D85PX-18 WH 264 (197) 69,860 (31,688) Komatsu SAA6D125E-7 D155AX-8

D155CX-8

D475A-8

(54,871) Komatsu SAA6D140E-7

(74,090) Komatsu SAA6D170E-7

LIEBHERR

DRESSTA

WH: Waste Handler

Generation 8 crawler dozers

Offering outstanding grading performance and 3 levels of Operator Assistance Systems, you can complete your job with cutting edge p cision and costeffective operation. www.liebherr.com

Next Generation Cat D8 Dozer Provides Next-Level Tech; Features Remote Ops

Caterpillar Inc.’s new Cat D8 dozer with advanced technology is designed to provide faster more accurate results.

The next generation design makes it easier for operators to transition to different machine sizes. The bulldozer’s elevated sprocket offers better ride and balance than low-drive undercarriages, and its long undercarriage delivers the D8’s renowned performance of high penetration forces and superior dozing performance.

The Cat C15 engine offers an increase in horsepower over the previous build to take on a wide range of dozing, ripping and grading tasks.

Completely Redesigned Cab

The D8 dozer’s next generation cab offers more space than the previous design complete with a wide air suspension seat with multiple adjustment options. Featuring an integrated rollover protective structure (ROPS), the next generation cab provides 17 percent improved visibility than the previous design. (Visibility improvements based on virtual visibility analysis. Comparisons made from a D8 (21B) model to the Next Generation D8 (22A) model.) It can be removed in approximately 30 minutes to facilitate machine servicing.

The 10-in. touchscreen main display has built-in key features assistance to give operators an overview of the machine, technologies and helpful tips. When the machine is in reverse, the standard high-definition rearview camera feed shows prominently in the display.

Distributed air from the heating, ventilation and air conditioning (HVAC) system effectively circulates around the operator and helps reduce window fogging and frosting.

Broad Technology Offering

Assist technology features minimize operator input, boosting productivity for less experienced operators and decreasing effort and fatigue for everyone, while delivering quicker and more precise outcomes. Cat Assist with Attachment Reader Option (ARO) standard features include:

• Stable Blade to work seamlessly with operator inputs to help produce a smoother surface when operating manually

• Traction Control automatically reduces track slip to save time, fuel and track wear (Feature not operational indoors or in areas where a GNSS/GPS signal is not available.)

• Steer Assist reduces steering inputs by automating track and blade tilt steering

• Blade Load Monitor leverages GPS and provides realtime feedback on current load versus optimal blade load, based on ground conditions, and actively monitors machine load and track slip2

• AutoRip automates ripper raise/lower and shank in/out positioning to maximize ripping productivity

• Attachment Ready Option (ARO) provides wiring and mounting for faster installation of dealer-installed options like Cat Grade with 3D, AccuGrade, Universal Total Station (UTS) or other grade control systems

• AutoCarry uses a GPS signal to automate blade lift, helping to maintain consistent blade load and reduce track slip2

• Cat Grade with Slope Assist automatically maintains pre-established blade position without a GNSS/GPS signal

• Slope Indicate is included in the main machine displace and shows side slope and uphill/downhill grades to help operators with slope work

Remote Operation

Featuring an external connector for efficient dealer installation of a plug-and-play, roof-mounted remotecontrol unit, the new D8 dozer ships from the factory remote control ready. Cat Command for Dozing removes the operator from the cab by enabling remote dozer operation when working in hazardous environments.

With no on-site network requirements, the portable and lightweight Command console provides quick and efficient line-of-sight remote control from up to 1,312 ft. for optimum operator visibility. The Command station delivers comfortable, non-line-of-sight operation either on-site or from miles away. The station features a comfortable seat, familiar controls and allows the use of Grade, Payload, Assist and other technologies using the included touchscreen.

Enhanced Machine Connectivity

The next generation D8 dozer design enables a wider range of machine connectivity than prior models. Streamlining service efficiency, Remote Troubleshoot saves time and money by allowing the Cat dealer to perform dozer diagnostic testing remotely. Remote Flash enables on-board software updates without a technician at a convenient time that does not disrupt the production schedule.

Customizable dashboards streamline fleet management efficiency by providing critical machine operating information like dozer hours, miles, location with mapping, idle time, CO2 emissions, asset status and operation, and fuel utilization.

The D8 dozer leverages VisionLink to provide actionable data insights, accessed anywhere a connection is available through Cat Product Link, for all connected assets, regardless of fleet size or manufacturer.

Application Specific Performance

The next generation Cat D8 waste handler is designed and built from the frame up to withstand challenging landfill operating environments. Specialized guarding, striker bars and seals help protect the machine and undercarriage from impact, material wrapping and airborne debris.

Impact-resistant polycarbonate cab doors eliminate the need for door screens, while lights are mounted high on the dozer, away from the debris for protection, to illuminate the work area. The configuration features a high debris cooling system with automatic reversing fan, cooling system swing out cleaning access, laminated thermal shields and insulated clean emissions module. Its waste undercarriage with centerhole track shoes and landfill-specific blade designs help to optimize performance.

For more information, visit cat.com.  (Caterpillar photo)

martinequipment.com

Goodfield, IL 309-965-2502

Peru, IL 815-224-4711

Rock Island, IL 309-787-6108 Springfield, IL 217-528-4347

Tolono, IL 217-485-6755

Cedar Rapids, IA 319-365-0515

Dubuque, IA 563-588-1950

Columbia, MO 573-657-2154 Palmyra, MO 573-769-2274

murphytractor.com

Park City, KS 316-942-1457

Great Bend, KS 620-792-2748

Humboldt, KS 620-473-7020

Olathe, KS 913-298-7373

Topeka, KS 785-233-0556

Ulysses, KS 620-356-1071

Dodge City, KS 620-227-3139

Gering, NE 308-436-2177 Omaha, NE 402-894-1899 Lincoln, NE 402-467-1300

Grand Island, NE 308-381-0741

North Platte, NE 308-534-7020

Kansas City, MO 816-483-5000 Springfield, MO 417-863-1000

Des Moines, IA 515-263-0055

Fort Dodge, IA 515-576-3184

Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085 Brunswick, OH 330-220-4999 Cambridge, OH 740-439-2747 Canton, OH 330-477-9304 Cincinnati, OH 513-772-3232 Columbus, OH 614-876-1141 Jackson, OH 740-688-4100 Lima, OH 419-221-3666 Painesville, OH 440-639-0700 Poland (Youngstown), OH 330-629-6299 Rossford, OH 567-352-7001

Vandalia (Dayton), OH 937-898-4198

www.aisequip.com

Bridgeport, MI 989-777-0090

Grand Rapids, MI 616-538-2400

Lenox, MI 586-727-7502

New Hudson, MI 248-437-8121 Williamsburg, MI 231-267-5060

The new Cat D8 dozer has a common cab and interface with D5-D7 dozers.

www.brookstractor.com

Madison (Sun Prairie), WI 608-837-5141 Milwaukee, WI 414-462-9790

Green Bay (De Pere), WI 920-336-5711

La Crosse (West Salem), WI 608-786-2644

Stevens Point (Plover), WI 715-254-2777

Racine (Mt. Pleasant), WI 262-898-6700 Sparta,WI 608-351-2101

www.lec1.com

Beaver, WV

304-255-1525

Cowen, WV 304-226-3299

Cross Lanes, WV

304-204-1818

Pleasant Valley, WV

304-534-5454

Norton, WV

304-636-6421

Marietta, OH 740-373-5255

Ashland, KY

606-327-1709

Pikeville, KY

606-432-0321

www.westsidetractorsales.com

Lisle, IL

630-355-7150

Rockdale, IL 815-730-9011

Rockford, IL 815-961-3160

South Holland, IL 708-331-6362

Wauconda, IL 847-526-7700

Bloomington, IN 812-333-9677

Fort Wayne, IN 260-482-8576

Indianapolis, IN 317-544-3411

Lafayette, IN 765-447-6933

South Bend, IN 574-232-1461

Terre Haute, IN 812-645-7160

mccoycf.com

Bemidji, MN 218-759-1996

Duluth, MN 218-722-7456

Grand Rapids, MN 218-326-9427

Ashland, WI 715-682-5522

Chippewa Falls, WI 715-834-2924

Merrill, WI 715-536-0633

Escanaba, MI 906-789-9054

Marquette, MI 906-789-7689

Fenton, MO

636-349-0200

Foristell, MO 636-463-2500

Mitchell, IL 618-931-1034

Mt. Vernon, IL 618-244-6800

Cape Girardeau, MO 573-334-0563

Paducah, KY 270-554-1131

Cuba, MO 573-885-0500

Owensboro, KY 270-684-2339

Evansville, IN 812-473-0484

Kingsport, TN 423-349-5001

Knoxville, TN 865-546-3207

Chattanooga, TN 423-855-0633

Nashville, TN 615-501-8600

Bowling Green, KY 270-842-3400

Louisville, KY 502-253-3721

Lexington, KY 859-788-3950

London, KY

606-862-8447

Liebherr Expands Digital Integration With Unicontrol On G8 Crawler Dozers

Liebherr crawler dozers have always been characterized by maximum compatibility with established machine control systems.

With the introduction of Liebherr Unicontrol Easy Link, customers can now benefit from the reliability of Liebherr machines alongside Unicontrol’s 3D control systems, offering a flexible solution for automated grading precision.

Availability, Implementation

The connection through Liebherr Unicontrol Easy Link is available for both new machines and as a retrofit for already delivered G8 crawler dozers in the mentioned size classes.

Integration requires activation of the corresponding software interface in the machine control system, a simple and direct electrical connection to the Unicontrol system and preparation of the cab to accommodate the Unicontrol display.

Unicontrol, founded in 2019 and headquartered in Odense, Denmark, develops modern GPS/GNSS-based 3D control systems for construction machinery. Its solutions are primarily sold in Europe, North America and Australia, with particular recognition in Scandinavia.

“Unicontrol is now a direct option for those looking to activate automatic grade control on their Liebherr machines,” said Martin Kirkmand, product development director of Unicontrol. “It’s a significant step that reflects the industry’s move toward more accessible, flexible technology that works the way contractors need it to.”

For more information, visit liebherr.com. 

401 Shawnee Avenue Kansas City, KS 66105 913-371-0868

109 W. Commercial Ave. Lowell, IN 46356 219-696-8911

26336 Heritage Drive Elwood, IL 60421 815-887-6527

www.yesequipment.com

11715 W. Silver Spring Rd. Milwaukee, WI 53225 414-263-9001

7001 Manufacturers Drive Madison, WI 53704 608-243-9253

drpequipment.com

41040 Cadiz-Dennison Road Cadiz, OH 43907 740-487-7125

2323 W State Street New Philadelphia, OH 44663 330- 364-8055

www.buckandknobby.com

6220 Sterns Rd. Ottawa Lake, MI 49267 MI 734-856-2811 OH 419-476-5293 Diamond Equipment www.diamondequipment.com

17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396

1501 Lynch Road Evansville, IN 47711 812-425-4428 800-258-4428

2000 Harlan Drive Terre Haute, IN 47802 812-299-4747 888-343-4747

120 Flex Park Drive Bowling Green, KY 42101 270-781-1061 800-489-1061 Universal Truck Sales

universaltruckservice.com

2845 Long Lake Road Roseville, MN 55113 651-639-0017 Holland Equipment Services

www.hesequipment.com

4203. Blue Star HWY. Holland, MI 49423 616-396-5535

Liebherr photo

Unicontrol assistance system on the Liebherr Generation 8 crawler dozer.

Liebherr photo

Side view of a Liebherr Generation 8 crawler dozer equipped with Unicontrol 3D machine control.

Liebherr photo

The Liebherr crawler dozer in action — efficiently moving material with precision thanks to digital integration.

Inside the cab: the Unicontrol interface provides operators with intuitive

Liebherr photo

THE DOER’S DREAM

MAKE YOUR MOVE

Push

... more material with the new Hyundai HD100 crawler dozer's best-inclass power-to-weight ratio.

See

...more than ever with the unobstructed view to the blade.

Engage

...more accurately and more productively with standard 2D or optional 3D machine guidance.

Doze

...with confidence, knowing your new 115 hp Hyundai crawler dozer delivers the quality and value you expect from Hyundai, with the peace of mind that comes with our industry-leading warranty.

No wonder so many first-time Hyundai users become longtime fans. See the Hyundai difference yourself at your local dealer, na.hd-hyundaice.com.

JOHN DEERE

DEVELON’s DD130 Dozer Offers Choice to Customers

DEVELON’s DD130 LGP dozer provides power and traction for exceptional productivity, according to the manufacturer.

“Operators benefit from unmatched visibility to the front of the machine and the blade, due to the machine’s design — particularly the in-line precleaner, which is integrated into the front engine compartment,” said the company.

“Built-in technologies simplify operation, making the machine an ideal choice for inexperienced operators.”

“We added the DD130 to our dozer lineup in 2023 and the machine has proven popular among customers in road construction,” said Jacob Sherman, dozer product manager of DEVELON. “Customers can choose between the XL or the low ground pressure [LGP] configuration, depending on their needs. The LGP model is ideal for minimizing ground disturbance and soil compaction.”

A standard 2D grading system makes precision grading easier. The operator programs the needed inputs, and the machine controls blade functions. For more complicated projects, DEVELON offers a 3D machine guidance and machine control

option in partnership with a third party. A GPS monitor is added when the dozer is equipped with the optional 3D machine guidance system that activates automatic blade movements based on GPS coordi-

nates, according to DEVELON.

Standard features for the DD130 dozer include:

• blade float;

• blade shake;

• ECO mode (selectable engine control);

• MY DEVELON fleet management (telematics);

• rearview camera;

• ripper circuit; and

• Smart Touch display.

The DD130 delivers 146.1 net hp for exceptional pushing performance. Standard ECO mode reduces daily fuel consumption by up to 5 percent without sacrificing grading performance. This feature lowers the pump power output in lower tractive conditions, saving fuel, according to DEVELON.

DEVELON designed the DD130 dozer with operator comfort in mind. An air-suspension seat and the cab’s suspension system provide a smooth ride, while a robust heating and cooling system is designed to maintain operator comfort in all seasons. Front and door glass defrost vents enhance visibility. High-illumination LED lights provide additional visibility for low-light working conditions, according to DEVELON.

For more information, visit na.develonce.com/en. 

DEVELON photo

Customers can choose between the XL or the low ground pressure (LGP) configuration.

The LGP model is ideal for minimizing ground disturbance and soil compaction.

Deere Expands Lineup With X-Tier, P-Tier Enhancements

John Deere photo

John Deere enhances the 700, 750 and 850 P-Tier dozers with next-generation technology, to maximize jobsite productivity, according to the company.

John Deere announced the launch of the new 850 X-Tier dozer and significant upgrades to the 700, 750 and 850 P-Tier dozers.

These advancements enhance power, precision and efficiency, helping operators maximize productivity while minimizing downtime, according to John Deere.

Building on its legacy of E-Drive, the 850 X-Tier dozer sets impressive standards in power, efficiency and precision to dozer applications, according to John Deere. The 850 X-Tier uses dual path electric drive technology for added simplicity over traditional drivetrains and optimizes torque delivery and reduces machine complexity.

To enhance customer confidence, John Deere now offers the 850 X-Tier dozer electric drive component assurance, providing 84 months/15,000 hours of coverage on key E-Drive components for qualified machines purchased between March 1, 2025, and Dec. 31, 2026.

Building off the L-Series cab, the 850 XTier enhances operator comfort and visibility, featuring 14 percent more glass area, ergonomic controls and an Advanced Vision System (AVS) for improved jobsite awareness. Designed for minimal downtime, the dozer also features a tilting cab, allowing quick access to E-Drive components for easy diagnostics and maintenance, according to John Deere.

“The 850 X-Tier dozer is a powerhouse machine designed to be fuel efficient and productive in challenging job sites,” said Matt Costello, product marketing manager, John Deere. “From enhanced operator

comfort to advanced SmartGrade technology, this machine helps the operator move dirt fast with precision.”

John Deere enhances the 700, 750 and 850 P-Tier dozers with next-generation technology, to maximize jobsite productivity. SmartGrade capabilities include EZGrade, SmartGrade ready with 2D grade control and 3D SmartGrade, providing operators with precise grading control and enhanced situational awareness, according to the company.

The SmartGrade platform provides plug and play capabilities for laser and total station control allowing customers access to more job sites. Larger touchscreen displays simplify navigation and setup for machine operation, ensuring a more intuitive experience, according to John Deere.

Operator-focused features, included in the P-Tier and X-Tier models, include heated and ventilated seat options, expanded storage and enhanced climate control, delivering greater comfort in all working conditions. Auto-load and carry automatically adjusts blade settings based on ground conditions, reducing the need for manual adjustments, according to John Deere.

“With advanced SmartGrade capabilities and enhanced operator features, our latest P-Tier dozers are engineered for greater efficiency and control,” said Costello. “These updates deliver the reliability and performance operators need to tackle even the most challenging projects.”

For more information, visit JohnDeere.com. 

Wilkerson Crane Rental Announces Acquisition of Jensen Crane Services

Wilkerson Crane photo

Wilkerson Crane Rental announced the acquisition of Jensen Crane Services from Rasmussen Group, following authorization by the company’s board of directors.

Wilkerson Crane Rental announced the acquisition of Jensen Crane Services from Rasmussen Group, following authorization by the company’s board of directors — Diana Holt (board chair) and Jeff Holt (board member). This strategic acquisition strengthens Wilkerson’s position as a premier crane service provider and expands its capabilities to better serve clients across the central United States.

The purchase enables Wilkerson to expand its manpower, fleet and geographic footprint, providing clients in diversified markets with access to a broader range of equipment and services. Jensen Crane Services’ established customer relationships and industry expertise will complement Wilkerson’s operations and drive continued growth, according to the company.

“This acquisition aligns perfectly with the Wilkerson portfolio,” said Cody Ward, CEO of Wilkerson. “Jensen’s presence reinforces our foothold in the upper Midwest, a critical region for both wind

energy and large-scale infrastructure projects. As we continue to pursue our aggressive growth goals, this strategic positioning allows us to better serve the wind sector and deliver comprehensive lifting solutions for major energy infrastructure developments throughout the region.”

“Jensen Crane Services has demonstrated the same commitment to quality and customer service that defines the Wilkerson brand,” said Larry Smith, COO of Wilkerson. “We’re thrilled to acquire these assets from Rasmussen Group and welcome the Jensen team into the Wilkerson family. Their team has built an outstanding reputation in the region, and I’m confident they will fit seamlessly within our culture.”

This acquisition underscores Wilkerson Crane Rental’s commitment to delivering comprehensive lifting solutions and further establishes the company as a trusted partner in the industry.

For more information, visit wilkersoncranerental.com or call 913/238.7030. 

Industrial Tractor Parts Reaches Maine to Texas, Beyond

Operational expansion has been another hallmark of his leadership.

Jack directed the completion of a new warehouse in St. Augustine, Florida, extending ITP’s reach in the Southeast and reinforcing its ability to deliver quickly across key markets.

He has also driven initiatives around greater branding on parts and products, aligning with his broader vision of strengthening ITP’s identity as not only a trusted distributor, but also an emerging brand in its own right.

Jack’s early tenure represents more than just incremental improvements—it marks the beginning of an overall modernization strategy for ITP. From technology upgrades and infrastructure investment to brand-building and talent development, his initiatives have positioned the nearly 70-yearold family enterprise for its next phase of growth. While these changes are already reshaping the company, they represent just the

start of Jack’s long-term impact on the future of Industrial Tractor Parts.

From past to present to future, a key differentiator for ITP remains its refusal to compromise on quality. The company partners only with manufacturers it has trusted for decades, often testing products in the field before widespread adoption. These strong supplier relationships — built over 20 years or more — enable ITP to respond quickly to issues, collaborate directly with factory leadership, and continually ensure the highest standards. From Cesar Mevorah’s first warehouse in Fargo to today’s nine-warehouse national network, the company has stayed true to its roots as a family-driven enterprise. With global partnerships, a service-first culture, and renewed leadership, ITP looks forward to many more successful decades ahead.

Undercarriage Parts

From the 1960s through today, ITP’s core product line has

remained consistent: undercarriage parts for dozers, loaders and excavators. The catalog covers:

• Track chains

• Track shoes

• Bottom and carrier rollers

• Sprockets and segment groups

• Idlers

• Rubber road liners for asphalt and street work

• Rubber tracks

• Ground engaging tools

• Track adjusters and assemblies

Each of ITP’s nine warehouses is equipped with a track press, allowing custom assembly of track groups for machines as large as a D8 or D9 class crawler.

Dealers, Repair Shops, Customer Service

While many of ITP’s customers have historically been independent repair shops — especially in the 1980s and 1990s — the company also supplies OEM dealers.

According to ITP, what sets it apart, beyond price, is service. The company prides itself on answer-

ing the phone at any time of day, providing in-depth research for obscure parts, and sourcing components globally when needed. As one example, a Pennsylvania customer required a hard-to-find idler unavailable in North America. ITP tracked it down through a long-standing Italian supplier, imported it and delivered it within six weeks — something the customer could not have achieved without ITP’s global connections.

Expansion, Reach

Today, Industrial Tractor Parts maintains nine strategically placed warehouses to serve contractors, repair shops and dealers across the United States. They are:

• Long Island City, N.Y.

• New Orleans, La.

• Dolton, Ill.

• Scarborough, Maine

• Houston, Texas

• Tulsa, Okla.

• Memphis, Tenn.

• Latrobe, Pa.

• St. Augustine, Fla. These locations allow ITP to respond quickly to demand across key markets.

Diversification: Beyond Undercarriage

While undercarriage remains the cornerstone, ITP is steadily expanding into ground engaging tools (G.E.T.), including bucket teeth, adapters and pins as well as rubber tracks. The company acknowledges this segment is complex and requires careful buildout, but early investments are already paying off, according to ITP.

Additionally, ITP is beginning to introduce its own house brand of products under the ITP label — providing customers with another trusted alternative alongside Berco and other manufacturers. The longterm goal: establish ITP as not just a distributor, but also a brand in its own right.  CEG (All photos courtesy of Industrial Tractor Parts.)

ITP from page 28

Wilkerson Crane photo Jensen Crane Services’ established customer relationships and industry expertise will complement Wilkerson’s operations and drive continued growth.

www.altaequipment.com

844-GO2-ALTA

18405 115th Avenue Orland Park, IL 60467

420 Nolen Drive South Elgin, IL 60177

26354 N US Hwy 12 Wauconda, IL 60084

480 Blaine St. Gary, IN 46406

613 E Stevenson Road Ottawa, IL 61350

1035 Wylie Drive Bloomington, IL 61705

www.lubyequipment.com

2300 Cassens Drive Fenton, MO 63026 636-343-9970

199 Airport Road Cape Girardeau, MO 63702 573-334-9937

2999 Mexico Road O’Fallon, MO 63366 636-332-9970

2625 North 24th Street Quincy, IL 62305 217-222-5454

4375 Camp Butler Road Springfield, IL 62707 217-744-2233 921 1st Street

Fairmont City, IL 62201 618-397-9971

www.tristatebobcat.com

1200 Highway 13 East Burnsville, MN 55337 952-894-0894

588 Outpost Circle Hudson, WI 54016 715-531-0801

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

2018 US Hwy 8 St. Croix, WI 54016 715-557-6010

www.lanoequip.com

6140 Highway 10 NW Anoka, MN 55303

763-323-1720 888-448-5266

23580 Highway 55 Loretto, MN 55357 763-479-8200 888-479-4342

3021 West 133rd Street Shakopee, MN 55379 952-445-6310 877-753-6100

www.bobcat-ent.com 9605 Princeton Glendale Road Hamilton, OH 45011 513-874-8945

225 Hughes Blvd Mount Orab, OH 45154 937-444-3865

3666 Lacon Road Hilliard, OH 43026 614-876-1116

182 Humphries Drive Reynoldsburg, OH 43068 614-863-1300

3000 Dillon School Drive Zanesville, OH 43701 740-313-0087

13117 Middletown Industrial Blvd. Louisville, KY 40223 502-245-1911

1309 Cahill Drive Lexington, KY 40504 859-254-3936

51 Harvest Drive Elizabethtown, KY 42701 270-506-4530

13350 Service Rd. Walton, KY 41094 859-449-7272

Construction Work Surges as Need for AI Data Center Boom Under Way

During the site survey and engineering phase, reference points and markers will be staked to guide the construction of everything on the data center site.

“The work starts with existing conditions, including the terrain, structures ad above- and below-ground infrastructure,” said Sunbelt.

The local climate also is a factor, said the site developer, Muller. Zoning laws, permits and environmental regulations also can impact site selection.

Once a site has been selected, proper site development is critical to ensuring a strong foundation for the data center.

In the excavation, grading and erosion control phase, these crews will remove, add, shape and compact soil and prepare it for the foundation.

“That could require a perfectly level base or one with a set slope,” noted the Sunbelt blog post. “Once complete, the general contractor brings in … onsite power and gets ready for pipe and utility line installation.”

Erosion control is a vital consideration for any construction project, but for data centers site stability and regulatory compliance are key concerns, said Muller.

“Without proper erosion control, stormwater runoff can wash away soil, destabilize the foundation, and introduce contaminants into the local ecosystem.”

This can threaten both the integrity of the data center facility and the surrounding environment, said the firm.

“Effective erosion and sediment control measures can prevent costly damage and ensure compliance with environmental regulations.”

Further, data centers depend on access to a robust network of utilities, including power, water and high-speed data connections.

“Utility installation is one of the most critical steps in the pre-construction phase,” said the company.”

Data centers require large amounts of electricity to power both servers and cooling systems. Water may be needed for the cooling system, and reliable

fiber networks are essential for data transmission. That’s why both wet and dry utility installations are necessary to support the operations of a data center, said Muller.

Utility installation affects power, gas and water lines as well as underground cables and sewage pipelines.

A site utility contractor can determine the exact location, depth and layout of any existing infrastructure.

“They keep the worksite safe while overseeing electrical and plumbing contractors, who install additional underground utilities,” said Sunbelt. “The grading contractor ensures surfaces are level in preparation for pouring the foundation.”

The type of structure to be supported, the soil it will lay on, bedrock depth and environmental risks become critical factors in foundation design.

“Ultimately, a combination of concrete and steel below keeps the structure above stable,” said Sunbelt.  CEG

Stone Products Inc. Hosts Open House

RD Olson Manufacturing representative Matt Gurney was available to discuss screening and aggregate equipment solutions.

Schlatter of Superior Industries highlighted its conveyor components, including belt scrapers and idlers, while sharing product literature and giveaways.

www.brandeismachinery.com

1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Bowling Green, KY 270/780-3004 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Evansville, IN 812/425-4491 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551 ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com

STONE from page 10

“We strive for excellent customer service, that goes beyond mere transactions and reinforces our core values,” said a spokesperson for Stone Products. “By hosting events like this for our customers it’s our way to show them that they are genuinely valued, nurturing a sense of community and connection. This builds trust and creates memorable experiences, that drive positive word of mouth promotion.”

The day offered appreciation for its loyal customers and its role as a trusted partner in the aggregates and construction industries. For more information, call 800/235-6088 or visit stonepro.com.  CEG

1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606 ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 • 800/888-9515 Rochester, MN 507/701-0199

Pat Remar of Worldwide Electric was on-site with a demo van, giving attendees a closer look at its power solutions.

Vince

echnologTe gy

o e pr Maximiz

inate potential damage peed qu , cr erators up to s our machines y omfr s Intelligent M Komastu’ our job si y on y oductivit

efully design w and car e c ) ol (IMC r achine Cont anced autom tes with adv yg . ned plans ou an help y ation

face to design sur uickly

Snow and Ice Section

Avoid Being Buried With Pre-Season Snow Prep Checklist

Snow removal contractors know winter doesn’t give second chances. When the first storm hits, there’s no time to scramble for parts, tackle maintenance issues or hurry operator training. Smart preparation in the fall ensures crews can respond quickly and minimize costly downtime when conditions are at their worst.

Prioritize Pre-Season Preparedness

A reliable and efficient winter season demands foundational preparation long before the first snow, reducing potential downtime during harsh cold weather.

Efficient operation starts with a solid, pre-season training program. Implementing an operator training program to ensure crews are proficient with specific equipment and proper snow removal techniques (pushing, blowing, piling) also is essential.

Another critical element of pre-season work is gaining site knowledge. Conduct site walks with property owners to identify and mark items like curbs, fire hydrants, overhead obstructions or drop-offs before they become hidden by snow.

Finally, ensure operator readiness by encouraging crews to prepare personal gear (layered, water-resistant clothing) and emphasize the necessity of being well-rested so they are physically and mentally ready for demanding on-call shifts.

While training and site walks lay the essential groundwork, maximizing your operational readiness requires a sharp focus on your fleet and logistics. Here are six tips to

stay ahead of snow removal by ensuring your equipment and planning are ready for the season:

1. Inspect Equipment Early

Use the fall months to thoroughly inspect machines and attachments, looking for worn components, hydraulic leaks or electrical issues. Schedule any repairs before winter so your fleet is ready when the first snow falls.

2. Plan Ahead for Parts and Supplies

Downtime can cost contractors valuable hours. During the fall, stock up on essential parts and fluids that may be needed throughout the season. Keep critical spares and tool kits on hand.

3. Match the Machine to the Task

Snow removal isn’t one-size-fits-all. Dense, wet snow requires more horsepower and pushing power than lighter,

drier snow, while different surfaces and areas covered may also demand different equipment. Evaluate your fleet to determine what compact machines may be best suited for the jobs you service most often.

4. Plan for Transportation and Mobility Crews often need to move quickly between properties, so hauling efficiency matters. Before winter, confirm your trucks, trailers and tie-down equipment are in good condition and capable of handling the loads put on them during the season. Verifying your logistics now prevents delays when time is critical.

5. Maximize Operator Comfort Snow events often mean long shifts at odd hours. Review and invest in cab comfort features like heating, ergonomic controls and suspension seats to minimize fatigue. Also, encourage operators to prepare their personal gear, stocking up on layers and backup gloves for when they need to work outside.

6. Put Attachments to Work

The right attachments can make crews more versatile. Snow buckets, blades, pushers and blowers each serve different purposes. Determine your optimal mix of attachments during the pre-season so operators are equipped to adapt instantly to any condition.

Setting Stage for Success

Preparation is the difference between fighting the storm and controlling the job. Do the work now to ensure prepared operators, maximum efficiency and clear properties. When the snow flies, those who planned will be ready to deliver.

Article reprinted with permission of Bobcat 

Bobcat photo

The right attachments can make crews more versatile. Snow buckets, blades, pushers

Bobcat photo

Sanco Equipment sancoequipment.com

2317 Consul St. Albert Lea, MN 56007 507-373-4490

12251 B 265th St. Mason City, IA 50401 641-450-7126

630 Schumann Dr. NW Stewartville, MN 55976 507-285-0753

2333 7th Ave. Mankato, MN 56001 507-625-4511

Manke’s Outdoor Equipment mankeoutdoor.com

225 West Rose Street Owatonna, MN 55060 507-451-2327

Tri-State Bobcat tristatebobcat.com

1200 Highway 13 East Burnsville, MN 55337

952-894-0894

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

588 Outpost Circle Hudson, WI 54016 715-531-0801

2018 US Highway 8 St. Croix Falls, WI 54024 715-557-6010

Bobcat of Brookings bobcatofbrookings.com

803 Main Ave South Brookings, SD 57006 877-338-5544

State DOTs Make Preparations for Winter Operations

Ohio DOT photo

State DOTs, such as the Oregon Department of Transportation and the Missouri Department of Transportation, are also busy seeking workers for snow and ice removal duties.

Several state departments of transportation across the country are gearing up for winter: inspecting snow removal equipment, hiring seasonal employees and engaging in outreach efforts to highlight the importance of their winter operations to the public.

The Ohio Department of Transportation (ODOT), for example, uses a team of nearly 3,000 drivers who often work 12-hour shifts during snow and ice events. While most are full-time employees, approximately 500 drivers are hired seasonally.

In addition to full-time and seasonal drivers, the agency also uses auxiliary drivers — full-time Ohio DOT employees who normally do other tasks and only plow snow when needed.

Ohio DOT noted that it is responsible for more than 43,000 lane mi. of state and U.S. routes outside municipalities and all interstates in Ohio, except the Ohio Turnpike, and its goal during winter storms is to have primary routes back up to speed within two hours and secondary routes within four hours of the end of a snow event — a goal its crews hit 99.3 percent of the time during the winter of 2024-2025.

Currently, the agency said roughly 250 of its mechanics

Some state DOTs, such as the Colorado Department of Transportation, also handle avalanche mitigation duties during the winter as well.

are busy conducting 150-point checks from the plow blade to the salt spinner on each of the nearly 1,700 trucks in Ohio DOT’s fleet — checks conducted now so any needed repairs can be made well before the snow starts falling and the trucks hit the road.

For the winter of 2024-2025, Ohio DOT noted that its crews covered 9.1 million mi. and deployed nearly 769,177 tons of salt and 16.4 million gal. of liquid deicers. For the 2025-2026 winter season, the agency said it already has 800,000 tons of salt on hand.

“From the mechanics in the garage to the drivers on the road, every one of our Ohio DOT employees prioritizes safety in what they do,” said Pamela Boratyn, Ohio DOT’s director, in a statement. “Our team-members and their families travel the same roads you do. We want to make sure

Buyers Products Adds PRO-M Series to Its SaltDogg Pro Spreader Lineup

Buyers Products announced the upgrade of their popular SaltDogg Pro series line of salt spreaders to the SaltDogg PRO-M series.

PRO-M series spreaders feature a modern, compact, incab controller connected to the spreader by a simple twowire power and control cable.

“We designed the PRO-M series with the modern truck cab in mind,” said Scott Moorman, director of snow and ice of Buyers Products Company. “The new controller is about the size of an average smartphone, taking up much less room in the cab than a more traditional spreader controller.”

The new in-cab Multiplex controller uses CAN bus

(controller area network) technology, which connects the spreader’s components with a simple two-wire system. The design not only frees up space inside the cab but also requires a smaller wiring harness which greatly simplifies installation. The controllers have been through multiple seasons of testing, so users can expect the same operation as other SaltDogg spreaders, according to SaltDogg,

Designed for contractors, municipalities and fleet operators, the SaltDogg PRO-M series spreaders will be phased-in over time in 1.50, 2.00 and 2.50 cu. yd. capacities, with options for auger or chain drivelines. For more information, visit buyersproducts.com. 

Other state DOTs are conducting equipment checks, such as the Nevada Department of Transportation.

those roads are safe for everyone to use.”

Public outreach plays another key role in winter operations for state DOTs as well; not just in terms of the importance of snow and ice removal to reinforce safe winter driving habits as well.

For example, the Idaho Transportation Department (ITD) recently kicked off its second annual ‘Name a Snowplow’ contest, which invites Idaho students to submit creative names for agency snowplows and learn about winter driving safety at the same time.

Two snowplows in each of ITD’s six regions will receive student-chosen names through voting by ITD employees. Winning names will appear directly on the plows, and each winning classroom will get a visit from “their” snowplow and driver for a winter safety presentation.

Students in grades six through 12 statewide can work with their teachers to submit name ideas throughout October, with the winning names announced by the end of the year.

“Our snowplow drivers are thrilled to see students getting involved in this fun, educational opportunity that also highlights the importance of winter driving safety,” said Scott Stokes, ITD’s director, in a statement. 

Buyers Products announced the upgrade of its popular

Pro series line of salt spreaders to the

SaltDogg

SaltDogg PRO-M series.

Oregon DOT photo

Idaho Transportation Department photo

Buyers Products photo

MGX EQUIPMENT SERVICES

Bloomington, MN

952-888-2525

ABC RENTALS

StPaulMN

St Paul, MN

651-451-2264

COUNTRY SIDE SERVICES Ramsey, MN 763-441-4943

MINN Minn 763-6 NORT & EQU St Clo 402-3

EAPOLIS MOTOR SPORTS eapolis, MN 634-0244 TH CENTRAL BUS UIPMENT oud, MN 333-0655

PERRY'S TRUCK REPAI Long Lake, MN 952-473-4898

PRECISION LANDSCAP & CONSTRUCTION Hastings, MN 651-437-2305

ING

651-674-4000

Waverly, MN 763-682-5536

DICK VAALLE Y SERVICE

Apple Valley, , MN

y 'S V

952-432-2848

L-Z TRUCK EQUIPMENT

St Paul, MN

651-488-2571 NORT Owat 507-4 PODS White 651-4 PPMI Roche 507-2

THLAND FARM SYSTEMS tonna, MN 451-3131 S TIRE e Bear Lake, MN 426-4640

ester, MN 252-8097

RECTECH OUTDOOR SOLUTIONS Plato, MN 952-686-8711

RULE TIREL Willmar, MN 320-235-114 ST BONI MOT St Bonifacius, 952-446-1554

1996 Manitowoc 888, SN: 8881038, 230 ton crawler crane, Series 2 Counterweights, LSI/LMI system w wireless load links, Self-Erect option, Luffing jib & Aux drum Prepped, AC & Heated Cab, Request Boom & Jib Combo, Cleveland, Ohio CALL Contact Sales Dept 440-439-4749 sales@craneandshovel.net 22-23 NS

2018 ASV RT40, S/N: PKDS003730, 700 Hours, Cab w/ Heat & A/C, 48” Bucket $32,000

Contact Skip Henson 219-696-5680 • shenson@ronsonequipment.com 22 JM

2017 GRT 880, SN:235924, 4,855 HRS, Cummins Tier 4 Final, 134.7’ 4 section FPB, 33-56’ Bi-fold swingaway jib, CCS operating system, Full Outrigger monitoring system, Cleveland, Ohio CALL Contact Sales Dept 440-439-4749 sales@craneandshovel.net 22-23 NS

Business Calendar

To view our Business Calendar online, go to www.constructionequipmentguide.com.

ASSOCIATED GENERAL CONTRACTORS (AGC)

AGC Events Calendar:

All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.

• «Advanced Safety Management Training Courses (ASMTC)

Start Date: Monday, November 3, 2025 (8:00 AM)

End Date: Wed., November 5, 2025 (3:30 PM) Arlington, Virginia Safety and Health

• «AGC EDGE Planning and Scheduling (STP Unit 3)

Start Date: Monday, November 3, 2025 (4:00 PM)

End Date: Tuesday, November 18, 2025 (8:30 PM) Online, Virtual Training/Professional Development

• AGC EDGE Construction Supervision Fundamentals, Spanish Edition

Start Date: Tuesday, November 4, 2025 (4:00 PM)

End Date: Friday, November 14, 2025 (8:00 PM) Online, Virtual Training/Professional Development

• AGC EDGE Lean Construction Education Program 2nd Edition

Start Date: Wednesday, November 5, 2025 (9:00 AM)

End Date: Thursday, November 13, 2025 (6:00 PM) Online, Virtual Training/Professional Development

• Construction Financial Management Conference

Start Date: Wednesday, November 5, 2025 (11:47 AM)

End Date: Friday, November 7, 2025 (3:47 PM)

Las Vegas, Nevada

• Webinar: Inside the Construction Safety Excellence Awards: Tips, Insights, and Best Practices

Date: Wednesday, November 5, 2025 (2:00 PM –3:00 PM)

Virtual Safety and Health

• AGC EDGE Productivity and Managing Project Costs (STP Unit 5)

Start Date: Saturday, November 8, 2025 (9:00 AM)

End Date: Saturday, November 22, 2025 (2:30 PM) Online, Virtual Training/Professional Development For more information: AGC Phone Number: 703/548-3118 AGC Fax Number: 703/842-8817

NATIONAL ASSOCIATION OF LANDSCAPE PROFESSIONALS (NALP)

ELEVATE National Conference & Expo

Date: November 2 – 5, 2025

Place: Phoenix Convention Center 100 N. 3rd Street Phoenix, AZ 85004-2277

Phone: 602/262-6225

About the ACI Concrete Convention

Whether you are scaling your team, reﬁning your operations, or exploring new markets, ELEVATE offers the insights to help you and your team succeed.

Moving to a different city each year – from the East Coast to the West Coast – ELEVATE is always a new immersive experience designed to help you grow your business and adapt to a changing marketplace.

Elevate your business. Elevate your technology. Elevate the profession.

The ELEVATE Expo creates meaningful connections with the experts who offer the equipment, products and technology solutions you need to make your business more efficient, productive and innovative. The expo is designed to facilitate conversation, not to have you spend hours walking on a giant show floor and waiting in line to demo equipment. There is no demo area, the expo takes place indoors, featuring smaller booths allowing you the time to talk with the experts and manufacturers, get insights into what to expect with the supply chain, connect with peers at networking events, and join focused discussions at the Campfire Conversation Sessions.

Expo Networking

The Expo is an essential part of the ELEVATE experience because we’ve designed it to be a hub for connections…network with peers during the happy hours, at lunch and in our campﬁre areas on the show ﬂoor. For more information:

National Association of Landscape Professionals

Toll Free: 800/395-2522

Email: info@landscapeprofessionals.org

WORLD

Date: October 30, 2025

Place: November 3 – 5, 2025

Place: Music City Center

201 Rep. John Lewis way South Nashville, TN 37203

Phone: 615/401-1400

The Music City Center is Nashville’s Convention Center located in the heart of downtown.

The 2.1 million square foot facility opened in 2013 and was built so that Nashville could host large, city-wide conventions in the downtown area.

World Demolition Summit is the premier event for the demolition industry.

Conference – Networking – Awards

The Summit has grown signiﬁcantly since its inaugural event in 2009 and is ﬁrmly established as one of the major annual events for the demolition industry. This year we are making fantastic changes to the summit, including an expanded schedule that spans two days, more networking opportunities and the highly anticipated World Demolition Awards. Attracting an international audience, the conference brings together leading industry experts who will present some of the most challenging demolition projects.

Awards

Recognizing excellence and best practice, as determined by an international judging panel of leading industry experts.

> Recognize and reward excellence

> Network with colleagues and customers

> Promote new products and technology

> Make new business contacts

For more information: Demolition Association Phone: 202/367-1152

ASSOCIATED GENERAL CONTRACTORS of AMERICA (AGC)

CONSTRUCTION FINANCIAL MANAGEMENT ASSOCIATION (CFMA)

Construction Financial Management Conference Dates: November 5 – 7, 2025 Place: Las Vegas, Nevada

***The exact location of the conference has not been announced yet. Venue details will be provided closer to the event. Please contact official websites of AGC or CFMA for latest updates.

In-Person Education & Networking Opportunity for every Finance Professional in the Construction Industry! About the Conference:

Here'

how the BARGAIN ADS Work:

• Supply us with a photo of a

• Either email your copy &

•

• Your ad will run for two consecutive

The Home of ELEVATE 2025, Phoenix Convention Center, Downtown Phoenix.

The ELEVATE Expo

The ELEVATE Expo is a hub for landscape professionals to explore cutting-edge technology and solutions for their businesses. Attendees can connect with experts, discover new equipment and products, gain insights into industry trends and network with like-minded professionals and industry peers at dedicated networking events, fostering collaboration and community.

The Construction Financial Management Conference is jointly sponsored by the Associated General Contractors of America (AGC) and the Construction Financial Management Association (CFMA).

This conference is speciﬁcally for ﬁnancial professionals in the construction industry to dialogue and address situations unique to the industry.

If you are an owner, CFO, controller, CPA, auditor, consultant, banker, surety or legal professional – this is the conference for you!

For more information, contact AGC at www.agc.org or contact CFMA at www.cfma.org

WANTED (US): KOMATSU D475A5E0CRAWLER DOZER. WANT TO BUY KOMATSU BULLDOZER 475A-5 OR 475A-8 WITH BIG BLADE TO PUSH WOOD. UNDER 6000 HOURS, REAL HOURS METER AND FRAME.

EMAIL:

JEANMAURICEBOUTIN@VIDEOTRON.CA ; PHONE: 450-346-8975

WANTED (US): BOMAG PADFOOT COMPACTORS, ALL MODELS. LOOKING TO BUY FOR AN EROPS 84'' PADFOOT COMPACTOR (ANY MAJOR BRAND).

EMAIL: EQUIPMENTDESTINY@GMAIL.COM

WANTED (WORLDWIDE): WESTERN RETEK CRUSHERS, ALL MODELS; LOOKING FOR ANY SPARE PARTS FOR A 2006 WESTERN RETEK IMPACT CRUSHER 1310I.

EMAIL: WARRUMCONSTRUCTION@ICLOUD.COM PHONE: 317-71-07390

WANTED (CA); BUSH HOG PLOWS, ALL MODELS. NEED PLOWS- PREFER BRUSH HOG. WILL PAY TOP DOLLAR WHOLE OR PARTS.

EMAIL: TOMTOMGOFORIT@YAHOO.COM

WANTED (CA): HITACHI ZAXIS450LC EXCAVATORS. LOOKING FOR HITACHI ZX460LC, ZX470LC, ZX800LC, KOMATSU PC490LC-1.

EMAIL: VIETUSAEXPORT@GMAIL.COM; PHONE: 951-777-9999

WANTED (WA): CATERPILLAR WHEEL LOADERS, MODELS FROM 908 TO 980. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188

WANTED (WA): CATERPILLAR BACKHOE LOADERS, ALL MODELS. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188.

WANTED (US): INSLEY EXCAVATORS, ALL MODELS. LOOKING FOR LAGGING AND CABLE DRUMS FOR A W B INSLEY 1967. EMAIL: JCTHEDANCEMAN@GMAIL.COM; PHONE: 231-872-9117

WANTED (WORLDWIDE): CATERPILLAR 140K MOTOR GRADER. EMAIL: MBUSIINGE@YAHOO.COM; PHONE: 077-791-2153

WANTED (OH): CASE 580SM2 BACKHOE LOADERS. EMAIL:JERRY@VIOXEXCAVATING.COM; PHONE: 513-460-3315

WANTED (WORLDWIDE): VERMEER RTX 750 / RTX8550 EQUIPPED WITH A LARGE CUTTING WHEEL. EMAIL: RENATO.NASCIMENTO@ELEBBRE.COM PHONE: +55 11 994602266

WANTED (US): CATERPILLAR 140G MOTOR GRADERS, LOOKING TO PURCHASE A RANGE OF HEAVY CONSTRUCTION EQUIPMENT AND WOULD APPRECIATE RECEIVING YOUR BEST OFFERS FOR THE FOLLOWING MODELS, RUNNING OR NON-RUNNING: CAT WHEEL LOADERS: 950B 950E 966E 966F HITACHI EXCAVATORS: EX200LC EX270LC EX300LC EX330LC EX400LC EX450LC-5 JOHN DEERE WHEELED EXCAVATORS: 495D 595D CAT MOTOR GRADER: 140G CAT AND CASE BACKHOES VÖGELE PAVERS: S1800 S1900 CEDARAPIDS ROLLERS/PAVERS. EMAIL: ILYAS.MTCPK@GMAIL.COM PHONE: 0923322489350

WANTED (US): JOHN DEERE 850K SMARTGRADE CRAWLER DOZERS, BULLDOZER 850KLGP JOHN DEERE SMART GRADE «3D« ENC CAB WITH WINCH 36 INCHES SIX WAY UNDER 1200 HOURS REAL HOURS METER AND FRAME NO JUNK NO WEB MUST BE USER«CONTRACTOR« OR PAYMENT OUT« OR SUCCESSION.

EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975

WANTED (WA): CATERPILLAR EXCAVATORS, MODELS 320C, 320D, AND 320E. EMAIL: JAN@GOLDENHORSEMACHINERY.COM PHONE: 425-217-6188

WANTED (US): CATERPILLAR D8K CRAWLER DOZERS. TRYING TO LOCATE D8K DOZER WITH SPACER PLATE ENGINE, RIPPER AND PUSH BLADE. EMAIL: IUKANDCO@GMAIL.COM

WANTED (US): CATERPILLAR TH62 TELEHANDLER. LOOKING FOR A BROKEN, NON-RUNNING CATERPILLAR TH62 TELEHANDLER. I HAVE ONE AND WOULD LIKE TO BUY ONE FOR PARTS. EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: (6I6) 8I3-3642

WANTED (KS): VERMEER TRACK TRENCHER. EMAIL: STATELINEDIG@DIODECOM.NET PHONE: 402-806-0073

WANTED (US): KOMATSU D475A-5, CRAWLER DOZER. NEED BULLDOZER 475A 5 WITH RIPPER OR SS RIPPER 2016 AND UP.

EMAIL:

JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975

WANTED (US): CASE BACKHOE LOADERS, 580 SUPER M AND SUPER L MODELS.

EMAIL:

FRANKHORAN@GTMIDATLANTIC.COM PHONE: 1-800-654-USED

WANTED (VT): CASE 650L LGP CRAWLER DOZER. ENC. CAB, UNDER 900 HOURS, 27.5 INCH PADS.

EMAIL:

JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975

WANTED (US): LIEBHERR LTM 1220 ALL TERRAIN CRANES.

EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: 346-484-0369

WANTED (US): KOMATSU 270-8 WHEEL LOADERS - LOOKING FOR KOMATSU WA270 OR WA200 WHEEL LOADERS WITH THE FOLLOWING CRITERIA: HOURS: UNDER 5,000 (PREFERRED), BUT HIGHER HOURS ARE ACCEPTABLE AT A LOWER PRICE. YEAR: BETWEEN 2014 AND 2018. BUDGET: AROUND $75,000, DEPENDING ON CONDITION AND HOURS. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM

WANTED (AZ): MECALAC 10 MCR EXCAVATORS. EMAIL FAWCETT.HOTSHOT@GMAIL.COM; PHONE: 870-321-9572

WANTED (CA): CATERPILLAR 966F II WHEEL LOADERS - LOOKING TO BUY ANY CATERPILLAR DISMANTLED MACHINES – WHEEL LOADERS, EXCAVATORS, BACKHOES, DOZERS OR MOTOR GRADERS, ANY MODEL. EMAIL: FEEDBACK@GCESEQUIPMENT.COM; PHONE: +1 (657) 274-8033

WANTED (PA); MANUFACTURER: INTERNATIONAL 250-C CRAWLER LOADER. LOOKING FOR A MACHINE IN ANY CONDITION OR IN ANY STATE. EMAIL: HARLOWCONTRACTING@YAHOO.COM; PHONE: 267-738-5984

WANTED (US): TAKEUCHI SKID STEER LOADERS, ALL MODELS. TL150, MUSTANG MTL 25TH, GEHL CTL80 TURBO 2 OR CYCLONE AIR FILTER ASSEMBLY AND ACCESSORIES, PLUMBING FROM FILTER AND EXTERNAL SPINNER. EMAIL: AMATZEN@BROOKFIELDR3.ORG PHONE: 660-734-0452

WANTED (WA): CATERPILLAR 420E BACKHOE LOADER. INTERESTED IN PURCHASING THE FOLLOWING CATERPILLAR BACKHOE MODELS: CAT MODELS: 416C, 416D, 416E, 420D, 420E, 420F ST, 420F, 420F IT, 420F2, 420F2 IT. ALSOLOOKING FOR CASE BACKHOE MODELS: CASE MODELS: 580M, 580SM, 580N, 580SN. PLEASE PROVIDE DETAILS ON THEIR CONDITION, OPERATING HOURS & PRICING.

EMAIL: JANDWINS@GMAIL.COM; PHONE: 425-286-8778

WANTED (GA): RYAN MODEL 2070 GRAPPLE

EMAIL: BOBBYSHELTON1983@GMAIL.COM; PHONE: 678-323-5647

WANTED (WORLDWIDE) CATERPILLAR CRAWLER DOZER, MODEL D11 / D11T CD. GOOD WORKING CONDITION. EMAIL: HYESUNG_KIM@NAVER.COM; PHONE: 822-425-6601

WANTED (US): JOHN DEERE CRAWLER DOZER, MODEL 550K LGP. NEED BULLDOZER, 550K LGP JOHN DEERE 2020 – 2023, ENC. CAB 24 INCHES WITH WINCH, UNDER 700 HOURS METER AND FRAME. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975

WANTED (TX): CATERPILLAR 950B WHEEL LOADER; LOOKING FOR A CAT 950B OR E, OR ANY MECHANICAL WHEEL LOADERS FOR SALE

EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM; PHONE: 281-694-5478

WANTED (NC): JCB 214E BACKHOE LOADER - HEAVY ROOT RAKE TO REPLACE FRONT BUCKET ON 214E BACKHOE LOADER

EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310

WANTED (NC): JOHN DEERE 12” BUCKETS – LOOKING FOR A 12” BUCKET FOR A JOHN DEERE 310 G BACKHOE.

EMAIL:

DANDHWORRELL@CHARTER.NET

WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: MMERRILL@WHEELERCAT.COM PHONE: 801-201-8655

WANTED (US): CASE WHEEL LOADERS, ALL MODELS - 521D 521E 521F 621D 621E 621F 721D 721E 721F. EMAIL: FRANKHORAN@GTMIDATLANTIC.COM; PHONE: 800-654-USED

WANTED (WORLDWIDE): HITACHI ZW180-6 WHEEL LOADERS. EMAIL: SALMAN.MAYI@GMAIL.COM

WANTED (US): CATERPILLAR 140G MOTOR GRADER - 8000 OR UP SERIAL MODEL. EMAIL: ROYALMACHINERYTRADERS@GMAIL.COM PHONE: 0-33-6059-8261

WANTED (OR): KOMATSU 3.0 YARD BUCKETS - NEED A 2015 KOMATSU WA270 LOADER BUCKET. QUICK RELEASE STYLE. EMAIL: BRANDONDANLEY86@GMAIL.COM; PHONE: 1-541-213-4973

WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. EMAIL: KARLOSZAC15@GMAIL.COM; PHONE: 657-274-8724

WANTED (US): STERLING DUMP TRUCKS, ALL MODELS; LOOKING FOR A ROTARY HI RAIL DUMP TRUCK, PRE EMISSIONS, ANY MAKE/MODEL. EMAIL: MURPHYCONTRACTORS@YAHOO.COM PHONE: 860-324-9693

WANTED (OH): FREIGHTLINER DUMP TRUCKS, ALL MODELS. LOOKING FOR A ROTARY HI-RAIL DUMP TRUCK, PRE EMMISSIONS, ANY MAKE/MODEL. EMAIL: MURPHYCONTRACTORS@YAHOO.COM PHONE: 860-324-9693

\WANTED (US): CUMMINS GENERATORS, ALL MODELS. LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION — CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS) CAN REMOVE IF NEEDED. EMAIL: MICHSURPLUS@GMAIL.COM; PHONE: 201-679-6437

WANTED (WORLDWIDE): KOMATSU WHEEL LOADERS, MODELS WA 600-3 AND WA 600-6 2014 OR UP MODELS. EMAIL: IUKANDCO@YAHOO.COM; PHONE: +923331234598

WANTED (PA): CAT OR CASE BACKHOE LOADERS, ANY CONDITION. EMAIL: DEALER.SALES11@GMAIL.COM; PHONE: 717-621-3470

WANTED (TX): INGERSOLL RAND 185CWJD AIR COMPRESSOR, NEW. EMAIL: DAVID@FELDERWW.COM; PHONE: 713-542-0458

WANTED (US): HATZ ENGINE - E71 HATZ DIESEL ENGINE, RUNNING OR PARTS EMAIL: AILEENLOZZI@ME.COM; PHONE: 717-806-8969

WANTED (WORLDWIDE): CATERPILLAR MOTOR GRADERS, MODEL 12G,14G,140G,140H ETC. RUNNING OR NON RUNNING UNITS. EMAIL: IUKANDCO@GMAIL.COM; PHONE: +92-333-1234598

WANTED (WORLDWIDE): VOLVO WHEEL LOADERS - LOOKING TO BUY VOLVO L320 , L330 OR L350F, YEAR ABOVE 2013. MUST BE RUNNER/NONRUNNER. EMAIL: ALADNANENT@GMAIL.COM; PHONE: +923445757577

WANTED (US): KAWASAKI WHEEL LOADERS 80Z, 85Z, 90Z EMAIL: EQUIPMENTDESTINY@GMAIL.COM; PHONE: +1 346 484 0369

WANTED (WORLDWIDE): ENGINE FOR A TRACK-TYPE TRACTOR - CAT D6R XL SERIES II - ENGINE C9 - SERIAL #: 4ZF10784 EMAIL: MILANZOLL@INCOMERH.COM

WANTED (US): CAT 983-B; KOEHRING 1066, RUNNING OR NOT; GRADALL ON TRACKS, RUNNING OR NOT; DRESSER 250-E CRAWLER LOADER. CALL 267-738-5984

WANTED (MA): CATERPILLAR 308E2CR QC EXCAVATOR. EMAIL: KKNOPE@DEFELICECORP.COM

WANTED (US): MISC. CATERPILLAR ATTACHMENTS. LOOKING FOR RELIABLE IT COUPLER ATTACHMENTS & JOHN DEERE 644K FORKS (JRB COUPLER) TO ENHANCE OUR CONSTRUCTION OPERATIONS. ITEMS REQUIRED TO BE IN GOOD, WELL-MAINTAINED CONDITION. PREFERRED ATTACHMENTS ARE SIDE DUMP BUCKETS (LEFT AND RIGHT), BROOM ATTACHMENT, EXTENDABLE BOOM ATTACHMENT FORKS. PHONE: 484-781-2958

EMAIL: JWALSH@JAMESTOHARAINC.COM

WANTED (WORLDWIDE): DRESSER 125E CRAWLER DOZERS - LOOKING FOR A COMPLETE BOSCH VA PUMP OR HEAD AND ROTOR. EMAIL: CRAIGBERENS944@GMAIL.COM

WANTED (FL): COTTRELL TRAILERS, ALL MODELS. EMAIL: WILFREORLANDO@GMAIL.COM

WANTED (US): JOHN DEERE BROOMS / SWEEPERS, ALL MODELS. MID-SIZED JOHN DEERE OR HYUNDAI EXCAVATOR PLUMBED AND WITH CONCRETE PULVERIZER. EMAIL: NEWYORKCWS@YAHOO.COM; PHONE: 973-956-8854

WANTED (PA): NEW HOLLAND ATTACHMENTS - 7614 LOADER ATTACHMENT FOR NH TRACTOR. EMAIL: KEVCOOKENTERPRISES@GMAIL.COM; PHONE: 814-386-5541

WANTED (NC); CLARK ECX 25 FORKLIFT. EMAIL: JBSSERVICES37@GMAIL.COM

ALEX LYON & SON AUCTIONEERS

www.lyonauction.com

315-633-2944

• Online

October 9 - 27, 2025

For: Major Job Completions of Several Long Island Jobs

• Online October 14 - 28, 2025

For: Late Model Snow & Construction Equipment Retirement Timed Auction

• Acme, PA

Thurs., October 30, 2025

For: Late Model Construction & Utility Equipment & more

• Rockville, MD

Wed., November 5, 2025

For: Several Job Completions at the same time

• Ashtabula, OH

Fri., November 7, 2025

For: Major Job Completion of Construction & Demolition Equipment

• Parkersburg, WV

Tues., November 11, 2025

For: Late Model Construction Rental Fleet Equipment

RITCHIE BROS. AUCTIONEERS

www.rbauction.com

402-421-3631

• Fort Worth, TX October 28 - 30, 2025

• Houston, TX November 4 – 6, 2025

• Orlando, FL November 6 - 7, 2025

• Great Lakes Regional Event November 12 – 13, 2025

• Tipton, CA November 13, 2025

ABSOLUTE AUCTION & REALTY, INC.

www.AARauctions.com

800-243-0061

• Online

Ends October 27, 2025

For: Schuyler County Surplus Auction

• Online

Ends October 28, 2025

For: Sullivan County Surplus Vehicle & Equipment Auction

ALLSURPLUS – A Liquidity

Services Marketplace

www.allsurplus.com

214-427-1862

• Online

Ends October 25, 2025

Coming Auctions

To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

For: Construction, Mining & Farming Auction

• Online

Ends October 25, 2025

For: Surplus Pickup Trucks, Truck Tractors, Garbage Truck & More

• Online

Ends October 31, 2025

For: Construction, Mining & Farming Auction

AUCTIONS INTERNATIONAL

www.auctionsinternational.com

800-536-1401

• Online

October 13 - 27, 2025

For: Online Auctions Closing Daily!

BAR NONE AUCTION

www.barnoneauction.com

866-372-1700

• Online Sat., November 8, 2025

For: Sacramento, CA Monthly Public Auction

• Online Fri., November 14, 2025

For: Fontana, CA

Monthly Public Auction

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• Online

October 28, 2025

• Online November 4, 2025

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Online

October 29, 2025

• Online November 5, 2025

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Union Grove, WI

Thurs., November 6, 2025

For: Fall Stateline Equipment Auction

HANSEN AUCTION GROUP

www.hansenauctiongroup.com

920-383-1012

• Online Only

October 14 - 28, 2025

For: Monthly Construction, Farm, Government & Truck Auction

• Online Only

Oct. 21 – Nov. 11, 2025 For: Heavy Equipment Auction

• Mosinee, WI

October 30 & 31, Live

November 3 & 4, Online

For: 4 Day Fall Nitke Contractor Auction

HUNYADY AUCTION COMPANY

www.hunyady.com

800-233-6898

• Virtual Online

Wed., November 5, 2025

For: Complete Liquidation: Estate of Charles Gayson

I.R.A.Y. AUCTION

www.iraymn.com

320-968-7230

• Online

Wed., October 29, 2025

For: Heavy Equipment, Truck & Trailer Auction

J.J. KANE AUCTIONEERS

www.jjkane.com

855-GO2-KANE

• Online

October 28 - 29, 2025

For: Southeast Regional Auction

J. STOUT AUCTIONS

www.jstoutauction.com

888-897-8864

• Live Streaming

Wed., October 29, 2025

For: Mining & Aggregate Auction

Featuring Rango, Inc.

• Online

Thurs., October 30, 2025

For: Kaiser Steel Buildings, LLC

Complete Dispersal Auction

J&J AUCTIONEERS

www.jandjauction.com

575-485-2508

• Online

Sat., October 25, 2025

For: Northeastern New Mexico Auction

JEFF MARTIN AUCTIONEERS, INC.

www.jeffmartinauctioneers.com

601-450-6200

• Lexington, MA

Sat., October 25, 2025

For: Heavy Construction, Trucks, Trailers & more

• Pampa, TX

Thurs., October 30, 2025

For: Construction & Pipeline Retirement Auction

• Kissimmee, FL

Tues., November 4, 2025

For: Live Construction Auction

• Fergus Falls, MN

Tues., November 4, 2025

For: 3rd Annual Construction & Ag Consignment Auction

• Brooklyn, MS

Thurs., November 6, 2025

For: South Mississippi Auto Auction

• Loudon, NH

Sat., November 8, 2025

For: Northeast US Live & Online Public Auction

MIEDEMA ASSET

MANAGEMENT GROUP

www.1800lastbid.com 616-538-0367

• Online at Repocast.com

Ends November 4, 2025

For: Construction & Heavy Equipment Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Online

Tues., October 28, 2025

For: Government Auction

• Online

Wed., October 29, 2025

For: Ag Equipment Auction

• Online

Thurs., October 30, 2025

For: Truck & Trailer Auction

• Online

Tues., November 4, 2025

For: Government Auction

• Online

Wed., November 5, 2025

For: Vehicles & Equipment Auction

• Online

Thurs., November 6, 2025

For: Construction Equipment Auction

RES AUCTION SERVICES www.RES.bid 833-SOLD-RES

• Online

Tues., November 4, 2025

For: Columbus Electrical Contractors Dispersal Absolute Auction

• Online Mon., November 10, 2025

For: Surplus Equipment Auction

RTi AUCTIONS

www.rtiauctions.com 585-243-1563

• Online

November 4 - 11, 2025

For: November NetAuction: Edition 1

SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-749-7616

• Online

Tues., October 28, 2025 For: Davis Construction Inventory Reduction Auction

SHETRON AUCTION & EQUIPMENT LLC www.shetronequipment.com 717-532-8828

• Shippensburg, PA Wed., October 29, 2025 For: Construction & Farm Equipment Auction

THOMPSON AUCTIONEERS, INC. www.thompsonauctioneers.com 937-426-8446

• Online

Thurs., October 30, 2025

For: Monticello Flooring & Lumber Co., Inc. Business Closing

YODER & FREY

HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990

• Houston, TX October 30 - 31, 2025 For: Heavy Equipment Auction

Fifteen Years of ‘I Make America’ Amplifying Industry Voices

Fifteen years ago today, AEM launched the I Make America campaign with one simple goal: to give the 2.3 million men and women of the industry a powerful, united voice for pro-manufacturing policies.

Since then, the campaign has grown into a nationwide grassroots effort with tens of thousands of supporters urging policymakers to help equipment manufacturers do what they do best: invest in their communities, grow their businesses and create more family-sustaining jobs in America.

Launched on a Sept. 29, 2010, in Washington, D.C., with support from television host and manufacturing advocate Mike Rowe, the I Make America campaign began as a rallying cry for the policies needed to fuel the industry and support the 2.3 million men and women who make the equipment that builds, powers and feeds our world.

call home. Both initiatives continue to this day, with the latest installment of Through the Lens recently featured in Washington, D.C.’s iconic Union Station.

The campaign’s most ambitious initiative came in 2024 with the launch of the AEM Manufacturing Express: a nationwide, 80stop bus tour that brought I Make America to communities across the country. Featuring interactive exhibits, policy discus-

The campaign has grown into a nationwide grassroots effort with tens of thousands of supporters.

Within just a few years, the I Make America campaign had grown to a community of 30,000 supporters who rallied behind the idea that when the equipment manufacturing industry is strong, America also is strong.

By 2014, the I Make America campaign was in full swing and headed to Las Vegas, Nev., for ConExpo-Con/AGG. AEM staff, along with member company volunteers, manned the I Make America booth and fanned out across the trade show to engage, educate and energize new supporters…and give away a custom-painted 2014 HarleyDavidson Road King to one lucky winner.

Two years later the campaign hit the road with the I Make America Game, an interactive experience designed to educate voters about the manufacturing issues at stake during the presidential election in a fun and engaging way.

In what was to become the inspiration for a much larger initiative, the campaign traveled across the Midwest with a custombuilt I Make America trailer where participants would compete in several construction- and agriculture-themed challenges to gauge their knowledge about the industry.

In 2019 the campaign’s increasing focus on telling the stories of the men and women who make America got a boost with the launch of the Through the Lens photo series and the Behind Every Product documentary series, which features equipment manufacturing workers across America.

These two initiatives have been deployed ever since to tell the amazing stories of the men and women who make America and the small town and communities that they

sion, lawmaker engagement and the Manufacturing Challenge, the tour added thousands of new supporters during its first year. In 2025, the bus tour rolled on — highlighting the industry’s innovation, workforce and economic impact at the Celebration of Construction on the National Mall in Washington, D.C,. and continuing to Texas for another 22 stops at equipment manufacturers.

“During the past 15 years the I Make America campaign has made a long-lasting impact on everyone who cares about the future of equipment manufacturing in America,” said Kip Eideberg, AEM senior vice president of government and industry relations. “Together with our supporters, we have engaged and educated hundreds of thousands of Americans who will help us change hearts and minds about importance of manufacturing; and we have told the stories of the 2.3 million men and women who make our industry strong and America exceptional. As we look ahead to the next 15 years, the campaign has never been more important to the future of our industry and our country.”

Looking ahead, I Make America is showing no signs of slowing down. The AEM Manufacturing Express will be heading to Louisville, Ky., for The Utility Expo and will spend the rest of the fall continuing to tell the stories of the people that make America ahead of next year’s elections. But with every anniversary that passes, the goal of the campaign remains the same: to give the 2.3 million men and women of the industry a powerful, united voice for promanufacturing policies.

For more information, visit aem.org/. 

Expo Showcases Latest Utility Equipment, Technology

Signature Competitions

Energize Show

Making its debut at The Utility Expo this year, the HDD Rodeo drew crowds as horizontal directional drilling crews competed for speed and precision against one another. PG&E Team #2 took home the top prize with a time of 50 minutes and 20 seconds. The team took home a custom Barbco Fire Ring, a Wyo-Ben remote controlled cooler, a CrewPlex Communications System and a $100 Utility Expo merchandise gift card for every team member.

The top three crews received free admission to the 2026 HDD rodeo (valued at $5,000). The event was produced in partnership with Benjamin Media and supported by main event sponsors American Mfg HDD Products, Ditch Witch West, Kondex, Underground Magnetics, and Vermeer.

The competitions continued with the National Utility Contractors Association (NUCA) hosting its National Equipment Operators Championships. The returning crowd-pleasing event used construction equipment for challenges like hole-in-one putting, soccer, cornhole and a pipe placement.

The

Making its debut at The Utility Expo this year, the HDD Rodeo drew crowds as horizontal directional drilling crews competed for speed and precision against one another.

and

Innovation in Education

The Utility Expo expanded its acclaimed Field Classrooms with immersive 90-minute jobsite-style classroom sessions covering topics such as pipeline rehab, HDD safety and emerging job site technology.

A safety luncheon symposium brought experts together for actionable discussions and insights on reducing risk and maximizing productivity.

Attendees praised the hands-on format for maximizing learning and value.

“Seeing and being able to hear somebody who has more experience than what I do in the industry be able to talk about it in open communication was really helpful”, said Andrew Manes of Trinity Earthworks. “But in addition to the classroom setting, coming out and being able to walk around where he can actually physically show us the equipment that he’s talking about, the references that he’s making and the added benefit of there being an active construction site here today. So being able to actually see it being

implemented in the way that we do every day in our company but also being able to see what’s coming next is super important.”

Attendees took advantage of live demonstrations and test

ing the show a premier destination for discovering field-ready solutions.

Commitment to Workforce Well-Being

Recognizing the mental health crisis affecting utility and construction professionals, The Utility Expo partnered with the American Foundation for Suicide Prevention (AFSP) to help advance its overall mission and broad spectrum of suicide prevention education programs and to highlight its construction resources available through the Hard Hat Courage initiative, which is supported by an industry coalition that includes AEM.

The partnership raised nearly $24,000 through attendee donations which will help fund organization’s critically important programming and resources for those facing mental health challenges and loss survivors.

“Donations raised at The Utility Expo are

incredibly important in advancing AFSP’s mission to save lives and bring hope to those affected by suicide, enabling greater access to our suicide prevention education and support programs,” said Trisha Calabrese, MPH, senior vice president of programs of the American Foundation for Suicide Prevention. “Forums like The Utility Expo help us to distribute construction-specific suicide prevention resources at scale, and we are so grateful to have the support of AEM as a partner in the coalition of leading construction industry organizations in our Hard Hat Courage initiative.”

Community Zone Creates Connection

The Utility Expo’s Community Zone returned with expanded programming that energized attendees through music, networking and industry spotlights. From live bluegrass and bourbon giveaways to thought leadership talks and mental health advocacy, the Community Zone offered a vibrant space for connection and reflection.

“This year’s show has been wonderful,” said Kevin Kongenske with Little Rock Water Reclamation. “It’s amazing how many vendors are under one roof. There are fleet aspects here for me, but then also companies who make the parts for the complex machinery that we’re responsible for that I can buy direct. If this is an industry you’re a part of, this is a must attend show. Everybody’s under one roof to see.”

“This year’s Utility Expo brought our industry together in powerful new ways — fostering innovation, collaboration and a strong sense of community among utility professionals,” said Show Chair Brian Metcalf. “The future of utility construction is bright, and The Utility Expo will continue to be where that future takes shape.”

The Utility Expo will return to the Kentucky Exposition Center in Louisville Oct. 5-7, 2027. Keep up to date on the show at theutilityexpo.com/. 

The Utility Expo photo

drives, mak-

The Utility Expo photo

The Utility Expo shattered attendance records as more than 22,600 utility construction and infrastructure professionals from all 50 states and 59 countries gathered at the Kentucky Exposition Center.

from page 16

The Utility Expo photo

The show unveiled the latest breakthroughs in underground utility, electric transmission, telecom

water/wastewater technologies shaping the future of the industry.

Utility Expo photo

Leaders to Spotlight Autonomy Tech, More During ConExpo 2026

ConExpo-Con/AGG, North America’s largest construction trade show, announced it will debut the Ground Breakers Stage, a new keynote platform showcasing autonomous tech, sustainable solutions and workforce innovations from global construction leaders.

Keynotes and presentations on the Ground Breakers Stage will be features of the show, occurring in Las Vegas March 3-7, 2026, complementing robust educational programming and more than 2,000 exhibitors across the 2.9 million sq. ft. of exhibit space. Speakers will range from the CEOs of Fortune 100 companies to successful entrepreneurs.

“Autonomous and sustainable technologies are redefining how we build, hire and innovate and ConExpo-Con/AGG is where the industry tests those technologies at scale,” said Dana Wuesthoff, show director at ConExpo-Con/AGG. “The Ground Breakers Stage gives attendees a front-row seat to the ideas and investments shaping construction’s global future.”

Every three years, nearly 140,000 construction leaders gather in Las Vegas to discuss innovation, technological advances, challenges and opportunities impacting the more than $2 trillion United States construction industry.

The innovative leaders who will be featured on the Ground Breakers Stage will be announced in the months leading up to ConExpo-Con/AGG 2026. For more information, visit conexpoconagg.com. 