May 2017 Advertiser

A #

214

The

May 2017 #10214

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Photo courtesy of: JLB and Panel Truss

BETTER SYSTEMS. BETTER RESULTS. MATCHPOINT ™ DIRECTDRIVE SYSTEM

INTEGRATES THE MITEK MATCHPOINT BLADE™ WOOD PROCESSING SYSTEM AND WIZARD PDS™ AUTO JIGGING SYSTEM

UNRIVALED SPEED AND ACCURACY WITH SORTING, OPTIMIZING AND PRINTING CAPABILITIES

DRASTICALLY REDUCES SET-UP TIME

©2017 MITEK, ALL RIGHTS RESERVED

INCREASE OUTPUT WITHOUT INCREASING Y O U R F O O T P R I N T. MiTek’s new MatchPoint™ DirectDrive System is a fully integrated sof t ware and material handling system that boosts roof truss cutting and assembly for greater plant productivit y.

Complete or configure your DirectDrive System.

Learn more at MiTek-US.com/DirectDrive

A

The

Component Manufacturing dverti$er

New & Used Equipment Saws .....................................................................................................................................................5

Truss Equipment ................................................................................................................................23

Panel Equipment ................................................................................................................................37

Trucks & Trailers ................................................................................................................................45

Misc. Equipment ................................................................................................................................53

Door, Stair, Beam Equipment .............................................................................................................59 Lumber Market .............................................................................................................................................60 The JobLine Hiring Zone .............................................................................................................................70

Available Jobs .....................................................................................................................................71

Available Candidates ..........................................................................................................................72

Design Team Suite ..............................................................................................................................68 Calendar of Events .......................................................................................................................................74 News & Announcements ..............................................................................................................................82 Advertiser Forum: Incremental Change, Optimization, and Progress .............................................................4 Joe Kannapell – MiTek: Resurgence of Panelization .......................................................................................6 Sean Hubbard – SQ-1: Spida’s Expanding Product Lines ...............................................................................8 Todd Drummond Consulting, LLC: Willful Blindness .................................................................................24 Glenn Traylor: What are the Acceptable Methods of Plating a Connector? ..................................................28 Ben Hershey – 4Ward Consulting: Robotics in the LBM & Component Industry .........................................48 Robert Glowinski – AWC: The Next Generation of Building Professionals .................................................61 Matt Layman – LLG: Countervailing Duty Preliminary Ruling ....................................................................65 Frank Woeste & Joe Loferski – All Things Wood: A Common-Sense Design to

Create Durable Overhangs ................................................................................................................66 Kelly Sias, PE – Simpson Strong-Tie: Treated Lumber and Trusses .............................................................76 Safety First Topics in English/Spanish ...........................................................................................................79 Gary Auman, NFBA Legal Counsel: OSHA’s New Electronic Recordkeeping Rule ....................................80 Randy Shackelford, PE, SE – Simpson Strong-Tie: Building Code Update:

2018 IBC to Reference ASCE 7-16 ....................................................................................................83 Joe Kannapell – MiTek: The Last Word .......................................................................................................89

Advertisers

Sections

Inside

Articles

Serving the Structural Building Components Industry

Acceptance Leasing & Financing .............................................................................................................41,51 Acer, Inc ....................................................................................................................................................20,58 Apex Machine Sales ..................................................................................................................................52,62 Clark Industries, Inc. ..................................................................................................................................22,32 Don Cernuto ..............................................................................................................................................19,67 Eagle Metal Products ................................................................................................................................12,31 Eide .................................................................................................................................................33,41 Fitzgerald Group .........................................................................................................................................57,67 MiTek | USP ..............................................................................................................................2,6,88,89,90 Panels Plus .........................................................................................................................................37,40,86 Simpson Strong-Tie .........................................................................................................10,11,76,66,82,83,84 Square 1 ........................................................................................................................................8,14,16,34,44 The Hain Company ..........................................................................................................................23,51,57,75 Todd Drummond Consulting, LLC ......................................................................................................24,25,26 Triad | Merrick Machine .......................................................................................................................42,54,87 Trussmatic ......................................................................................................................................................9 Vaagen Brothers Lumber ...........................................................................................................................60,64 Wasserman & Associates ....................................................................5,15,17,23,29,35,36,47,50,56,59,38,39 Wood Truss Systems .......................................................7,13,15,18,19,21,23,27,30,35,36,43,45,46,47,53,59

A

Th e

Component Manufacturing dverti$er

Adverti$er

May 2017 #10214 Page #4

Don’t Forget!

You Saw it in the

A

The

Advertiser

Forum Anna L. Stamm

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Published Monthly Publisher Thomas McAnally twm@componentadvertiser.org

Editor

Director of Communications and Marketing Component Manufacturing Advertiser.

Incremental Change, Optimization, and Progress Whether or not we realize it, we make incremental changes in our lives all the time.

Small, seemingly inconsequential changes occur throughout our daily routines. Sure, some routines feel like they’re set in stone and will never change, but think about it. Aren’t we still finding subtle ways to optimize them? Don’t we still learn little tricks to shave slivers of time off of our routines, giving us a little more flexibility and a little more time to divert to something else?

Building a Better Mousetrap Few people really intend to catch mice when they use the phrase, “build a better mousetrap.” It’s a way to say there is a possibility (opportunity) to make something better, but some time and effort (investment) must be spent in the attempt, without any guarantee that the end result really will be any better (profitable). While this is a convenient metaphor, unfortunately it is a bit limited, because so many things in life, when taken as a whole, are more complicated than designing a mousetrap.

Process Optimization Especially when considering an entire business, the mousetrap analogy begins to morph into a Rube Goldberg cartoon rather than a few bits of metal and wood arranged in a certain way. There are simply too many moving parts (people and processes), directly and indirectly connected, to be able to see a nice, clear, simple solution. So what do we do?

Fortunately, a lot of things improve naturally over time, as we learn those incremental improvement tricks. Also, from the right perspective, it may be easy to see how to optimize certain processes within a larger whole.

Even “small” improvements can produce greatly improved results in certain circumstances.

Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources.

Deadline 20th of each month.

Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.

Believe it at your own risk!

Copyright 2008-2009-2010 -20112012-2013-2014-2015-2016-2017

Component Manufacturing Advertiser The

Advertiser a division of

JobLine, Inc.

the

Options and Opportunities Eventually though, incremental changes will not be enough if you really want to keep improving and growing your business. So how do you decide when to invest in substantial changes? How do you choose what, and to what extent, to upgrade or automate?

How will you know which options will produce greater gains than costs? Will there ever be an easy answer to these questions? Nope. But as many of the contributors to this magazine will agree, the first, and perhaps most important, step is to ask the questions.

411 Walnut Street #12250 Green Cove Springs, FL. 32043

no reproduction in whole or in part without permission from the component manufacturing advertiser Archive Copies Available On Line www.componentadvertiser.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #5

Adverti$er

Don’t Forget!

You Saw it in the

NEW SAWS NEW!

NEW!

NEW!

Monet DeSauw FWA 500 Floor Web Cutter • • • • • • • • • • • • • •

Monet DeSauw DeRobo Linear Saw •

Push Button Powered Blade Angulations Single Push Button Setting for 2 Blades per Side Electronic Digital Readouts Backup Mechanical Indicators Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber 12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) 60 Pieces per Minute (4) Internal 16” Blades & (1) External 16” Cut-Off Blade Pneumatic Blade Brake on External Blade Dust Hoods Vibrating Waste Conveyor (under saw) Add $3,600 for 12’ Incline Waste Conveyor (adjacent to saw) Add $1,700 for Extra Set of Blades Add $6,500 for Single Sided Setup 480 Volt / 3 Phase FOB MO

• • • • • • • • • • • • • •

$50,000

Automated (Truss Design Software Download) or Semi-Automated (Touch Screen Entry) Operation All Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data 22” x 40 Tooth Blade on PAE Cut 1 or 2 Boards up to 20’ (2 Second Plunge Cut) Cut Chords, Webs, Rafters, Wedges & Stair Stringers Cut Long Scarfs by Multi-Plunging Servo Positioning on Infeed, Angle & Outfeed Pusher Over Travel Protection Ink Jet Printer Lumber Optimization Program Belt Waste Conveyor 480 Volt / 3 Phase / 60 Amp Includes 5 Day Onsite Installation & Training Optional Monet DeSauw Live Deck, Bunk Feeder & Incline Belt Waste Conveyor

FOB MO $170,000

Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST!

• • • • • • • • • • • • • • • • •

We’ll even help sell your used equipment too!

Automated Apollo Saw FOB New Zealand

NEW!

•

New Improved Design!

•

Solid 48” x 72” Frame and Arm Construction

• •

Monet DeSauw DeSawyer 2000 Automated Saw Touch Screen User Interface with Backup Mechanical Controls 3 Operating Modes: Auto, Semi-Auto & Manual All 20 Axes of Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data Anti-Collision & Optimizing Programming Auto Calibration Productivity & Time Tracking Maintenance Diagnostics Variable Speed Conveyor (0-50 Flights per Minute)with Powered Hold Downs (1) 30” x 80 Tooth Blade (27 3/4” Scarf on PAE) (4) 16” x 40 Tooth Blades (13 1/2” Scarf on Centerline) Pneumatic Blade Brakes on all 5 Blades 16 1/2” to 20’ Length Capacity (11” Minimum on Square End Blocks) Vibrating Waste Conveyor Under Saw 480 Volt / 3 Phase Includes 4 Day Onsite Installation & Training Add $2,100 for Extra Set of Blades Optional Live Deck, Label Printer, Ink Jet Printer, Catcher Display & Incline Belt Waste Conveyor. $252,000 FOB MO

•

20’ of MDF Bench Top with Automated 20’ Length Stop & 10’ Gravity Conveyor Workstation, Control Cabinet Enclosure & 17” Touch Screen Integration

Minimizes Flex on the Saw Frame

•

Serial Control System

Direct Drive 7.5 HP Motor with 18” Blade (230/460 Volt)

•

Includes all Plug & Play Wiring

•

Minimum Angle of 10 Degrees with 36” Stroke for Long Scarf Cuts

•

MangoTech/Spida Truss Cutting Software

•

Add $3,680 Two Day Onsite Installation & Training

•

Automated 160 Degree Angular Movement

•

•

Variable Stroke Limiter & Plexiglass Shield for Operator Safety

Add $750 for 12 Month Phone & Virtual Tech Support

•

Add $275 for Spare Blade

•

MDF Profiled Saw Bench Top Provides a Safe Working Platform

•

Add $558 for Saw Laser Guide

•

Add $890 for Dust Collector

Dust Extraction Outlet

•

Excludes Freight & Customs Charges

•

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

$48,753 FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #6

Adverti$er

Don’t Forget!

You Saw it in the

W

hat future does the Blueprint Robotics factory in This explains the success of floor panels on large multi-family Baltimore portend for housing construction? This huge German projects, and why the Blueprint model may prove to be most plant certainly rivals Pulte’s former facility in the same market successful on high density projects (shuttered in 2008). And it may even eclipse the robotics/ A considerable unknown is the viability automation going forward in multiple truss of closed wall panels, based on earlier plants IF the Blueprint panelization process experiences in this market (chronicled yields much lower jobsite labor. here previously). Even though less onsite The Baltimore area provides perhaps the best locale to extend panelization to floors and roofs, since wall panels are so widely accepted there. Add the fact that townhouse units have been a Baltimore staple for hundreds of years and they provide arguably the best venue for componentization (see my earlier articles on High Density Housing). Though CM’s are successfully serving this market with floors, roofs, and walls, none of their packages approach the completeness of the Blueprint product.

The proximity of the Blueprint plant to booming infill housing areas helps compensate for the increased cost of transporting bulky panelized assemblies. Since these assemblies unload considerably faster than individual trusses and can be installed directly in place, they greatly reduce erection time. Floor panels have leveraged these advantages in many multi-family projects in Minneapolis, Boston, and other Northern cities. The Blueprint model proposes to extend the labor savings proven in erecting floor panels to both wall and roof systems.

work is required by electrical, plumbing, and HVAC trades, will they “give back” enough to pay for the additional plant labor expended. Foundation inaccuracies, which plagued earlier attempts at closed panelization, are much lesser factors on high density units, as proven by the success of conventional wall panel suppliers in this venue.

In summary, the success of the Blueprint Robotics model depends upon extending considerably the 60% labor savings proven by “Framing the American Dream.” The robust townhouse market near downtown Baltimore provides a great venue for the Blueprint experiment, without impacting conventional component manufacturers, so far.

However, the inevitable down cycle of the housing market could easily undermine their investment, as it did Pulte’s, before start-up costs are recouped.

The Blueprint concept will succeed only if “give backs” by onsite trades offset increased factory and transport costs. While framers often fail to return their labor savings on detached housing, Next Month: Panelization they are much more likely to give back gains realized through Resurgence, continued “economies of scale” when framing multiple units consecutively.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Joe Kannapell - Senior VP MiTek Industries, Inc. www.mii.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

Wood Truss Systems

manufacturers’

Adverti$er

Don’t Forget!

May 2017 #10214 Page #7

representatives

New Monet DeSawyer 2000 Component Saw !

W NE $242,000 Base Condition: New Location: MO

New, Monet DeSawyer 2000, computerized, five-bladed component saw, sets up in 15 to 17 seconds, can run in manual mode, downloads projects from a network or manually using display screen controls.

Features all powered movements, cuts from 15" 90/90 cuts to 20 foot length, 2 x 3" to 2 x 12" lumber depths and internal brakes are standard. Options include enhanced servo controls featuring autocalibration, catcher's display and either shaker or belt scrap conveyor and incline. 440 volt, 3 phase electrical. www.woodtrusssystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #8

WWW.SQUARE1DESIGN.COM SQUARE 1 DESIGN & MANUFACTURE INC.

SPIDA’s EXPANDING PRODUCT LINEs Sean Hubbard

W

ell known for the best radial arm saw in the world, Spida Machinery has had a much broader product offering for many years. Square 1 Design has been expanding Spida’s product line offerings within North America in recent years. Returning from touring Spida Machinery, multiple component manufacturers, and one of the largest multi facility component manufacturers in New Zealand, I had the privilege to witness many of the proven lines in action. More than impressed, the quality, structural integrity, and fit and finish of the machines were second to none.

We are excited to be introducing the expanded product lines throughout North America. First is the Wall Panel Stacker. This hydraulic beauty is capable of handling a variety of sizes, available from 18’ up to 32’ wall panels. A whopping 450 lbs. weight capacity ensures it will meet the needs of every factory while reducing worker fatigue and potential injuries. Spida’s Wall Panel Stacker reduces the need for hard hats, overhead lifting, and two men stacking for less than their annual salaries, coming in at $75,000.00 USD. The Horizontal (Flat) Roof Truss Stackers are as impressive! They come in either two or three pedestal stations and have a similar 450 lbs. capacity. Comparable with our Peak-Up Stackers, zone stacking is developed and operated with a hand held remote control for safety and accuracy. Remarkably, these well-built stacking stations come in at a low price of $63,500.00 for the pair!

Look for more to come as we begin training the sales staff and upload the equipment on the website.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #9

Adverti$er

Don’t Forget!

You Saw it in the SAWS

2006 Alpine AutoMill RS Automated Component Saw Automated via Download or SemiAutomated via Touch Screen Input. 19 Axes of Automation. Sets up in 2 to 19 seconds.

Five Blades cut 2x3 thru 2x12 from 13” to 20’. Waste & Incline Conveyor, Extra Set of Blades and Some Spare Parts. 480 Volt / 3 Phase. (FOB AZ) $44,500 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Alpine Speed Cut Express Automated Radial Arm Saw Alpine Metra-Cut Saw (5 HP-3 Phase) with 16’ Blade. Speed Cut Express Automation with Touch Screen. Computer Automated Stop and Automated Saw Angulation as directed by Truss Design Software. Infeed/ Outfeed Roller Conveyor with Stands. Saw Barrier Guard. 2 Available at $15,000 Each FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 TimberMill 4-16 Web Saw (4) 16” Blades cut 2x4 and 2x6 Roof Truss Webs up to 16’ in length. Cut 4x2 Floor Truss Webs down to 11” in length. Single Side Digital Readouts. Powered Carriage, Angulation & Pivot Axis Elevation. Powered Upper & Lower Material Conveyor. Chain Drag Waste & Incline Conveyor. 480 Volt / 3 Phase. Add $2,000 for 208 Volt to 480 Volt Electrical Transformer. $19,900 NOW $18,900 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Hundegger SC-1 Linear Saw 2005 Hundegger model SC-1 linear saw, in operation, includes 90 degree vertical stroke action, stacks boards to four-high, horizontal positioning, stair stringer capabilities, 53-foot infeed and out-feed with second clamping and positioning system, electronic controls and operator console with second/ catcher monitor, front computer, hydraulic unit, automated clamping system, ink on one 1 1/2" face, end mill head router option, A/C option for cabinet cooling. Includes 32 foot small parts and 28 foot scrap conveyors.

Windows XP operating system. Available in December of 2016. Limited warrantee available with OEM installation supervision (at additional charge). $119,990 NOW $99,890 FOB TN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

First Fully Automatic Production Line for the Wooden Roof Truss Industry

www.trussmatic.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

WWW.TRUSSMATIC.COM

FAX: 800-524-4982

A-to-Z one roof the Eagle Metal advantage: every management solution, under

[ ] build it true every day SM

Manage your business your way by utilizing our comprehensive suite of products, services and solutions. It’s a strategic decision to make your production more effecient and your plant more profitable in the future.

This end-to-end approach simplifies your efforts and reduces your costs. So we’re able to bring your organization’s profitability to life with maximum results.

SM

It’s everything you need, in one place making the combination of the whole a complete integration that gives you the most bang for your buck.

Call us today for a free demo and how to put Eagle Metal’s solution suite to work for your business, your way.

CONNECTOR PLATES | ENGINEERING | DESIGN SOFTWARE | SUPPORT | EQUIPMENT EagleMetal.com

|

800-521-3245

|

12300 Ford Road, Suite 110, Dallas, Texas 75234

A

Th e

Component Manufacturing dverti$er

2005 MiTek Cyber A/T Component Saw F ​ ully automated, five-blade component saw, cutting performed by (2) 16" x 7 HP, (2) 20" x 7 HP, (1) 32" x 13 HP blades. Touch screen monitor (needs repair) with remote PC in enclosure for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 18" to 20 feet. Minimum 4-angle cut 22". Belt scrap conveyor included. 230v, 3ph power required. $67,990 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

May 2017 #10214 Page #13

Adverti$er

Don’t Forget!

You Saw it in the

SAWS

1990 Speed Cut Saw with Speed Measure Device Speed Cut Metra-Cut Centerline Saw. Speed Measure Device. Infeed/Outfeed Roller Conveyor. Cutting Depth of 6” with 16” Blade. Angular Capacity of 164 Degrees. 5 HP / 240 Volt / 3 Phase Motor. Saw Barrier Guard. Turntable Air Brake. $6,000 FOB IN. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1987 TimberMill 6-20 Component Saw Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12" up to 20'-0". Powered Angulation & Carriage. Chain Drag Waste & Incline Conveyor. The buyer is responsible for equipment dismantle. The seller will provide forklift and forklift driver.

(FOB MD) $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

JobLine.com, inc.

A

Th e

1998 Northtech Under-Table Saw 1998 Northtech model CFS-18L undertable saw. Features 18” blade driven by 10 h.p motor, foot pedal controls, and shock absorber. 2” x 12”, 3” x 11”, 4” x 10” cutting capacity. System includes SECO single bag dust collection system, and roller conveyor.

Air and 3 phase electrical required. $3,490 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

The

Component Manufacturing dverti$er

800-289-JOBS

Serving the Structural Building Components Industry

Whirlwind Model 1000LH Whirlwind up-cut saw features 18” blade, driven by 5 HP motor to 3 drive belts, mag starter and heavy steel housing. Adjustable cycle time up to 60 cycles per minute cushioned by HD shock absorber. System Includes Delta dust collection system and measuring stops. Air and 3 phase electrical required. $3,490 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Like Money in the Bank.

Service you can count on!

SHIRTSLEEVES DON’T JUST ROLL UP ON THEIR OWN.

1998 MiTek Cyber Saw Outfeed Conveyor MiTek powered outfeed conveyor designed for the Cyber saw, model 82274, motorized feed drives board away from saw conveyor.

This conveyor was designed to position the board for accurate ink-jet marking after cutting, then move board to the outfeed end stops. Includes mounting arm and control box for ink-jet marking system attachment, but no ink jet printing equipment. 208-230 / 460 volt, 3 phase electrical. $5,990 NOW $1,990 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com STRICTLY CONFIDENTIAL!

To enhance productivity and profitability for our customers, we work closely with them to understand their needs, then dig deep to find the right solutions for greater success. Visit our website or call today. And give us the chance to get rolling for you.

www.WoodTrussSystems.com 765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Contact us at: 1-866-647-7771 Exclusive North American Agent for

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #15

Adverti$er

Don’t Forget!

You Saw it in the SAWS

NEW! 2004 Hundegger SC-1 Linear Saw 2004 Hundegger model SC-1 linear saw, in operation, includes 90 degree vertical stroke action, stacks boards to four-high, horizontal positioning, 24-foot infeed and out-feed with second clamping and positioning system, electronic controls and operator console with two (2) computers, hydraulic unit, automated clamping system, ink on two faces, vertical mill head router option, a/c option for cabinet cooling and upgraded safety light barrier.

Upgraded to Windows 7. No angled conveyor included. Available in December of 2016. Limited warranty available with OEM installation supervision (at additional charge). $119,990, FOB NV. NOW $109,990 Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Razer v4 Linear Saw Six-Axis CNC Linear saw – Currently in operation and consistently upgraded this saw features a 6000 RPM hydraulic saw motor, full axis of motion to complete straight, single/compound bevel and rip cuts with a 13 3/4” blade. Handles material up to 20’ long, 14” wide and 4” depth. OEM supplied in-feed deck and outfeed conveyor with kick-off table are included. Right to Left hand feed configuration. Includes spare blade, encoder, (2) encoder wheels, sensor cables, and all available spare parts.

Includes Windows XP Service Pack two software and transformer for 230 or 600v to system specific 415v, 3Ph, Minimum 100 psi air required. (Ink jet printer shown in pictures is not included.) $39,490 FOB MB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Spida Vector Saw with Mango Plate Marker (FOB IN) $44,975 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’ Clary Shortcutter II Model 329 web saw with single sided setup, four blades, includes drag chain waste conveyor with tall incline. Minimum angle approximately 10 degrees, maximum angle 135 degrees. Minimum length cut is 9 inches (90/90), 18 inch 4-angle, and longest length cut is 18 feet. $8,490, FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1998 Mitek Cyber Saw Fully Automated 5 Blade Component Saw 1-32”, 2-20” and 2-16” Blades cut 4x2 and 2x4 through 2x12 up to 20’ in length Touch Screen Computer Waste Conveyor (under saw) Excludes Incline Waste Conveyor (adjacent to saw) $28,000 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

2000 TimberMill 6-20 Pro Component Saw Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0”. Base Plane Referencing and Pivot Axis Elevation for Faster Setup and Greater Accuracy.

Powered Angulation & Carriage. Single Sided Digital. Chain Drag Waste & Incline Conveyor. 480 Volt / 3 Phase. Excludes Live Deck. $26,500 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Representatives

NEW!

Monet FWA 500 Floor Web Saw

New, Monet five-head, floor truss web saw, cuts 4-angle, 4x2 floor truss webs from 16 inches and 90-90 blocks from 12 inches to four foot long maximum length. Features 10-board magazine feed, powered, fixed-quadrant angulation, manual carriage standard, shaker-pan scrap conveyor with short incline conveyor and cut-off blade. Option for longer carriage length, single sided setup (shown in pictures, but not standard), dust hood and choice of shaker or belt scrap conveyor. 440 volt, 3 phase. $ASK for PRICE, FOB MO.

MiTek Combi Set Web Saw Four Blades Cut Lengths from 2' to 16'. Waste & Incline Conveyor. Extra Set of Blades. 220/440 Volt - 3 Phase. $13,000 FOB MO. Wasserman & Associates 800-382-0329 765-751-9990 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

Adverti$er

SAWS

1995 Auto-Omni 5 Blade Automated Component Saw Automated Setup as directed by Truss Design Software Output. Computer, Enclosure & Stand. 5 Blades cut 2x3 through 2x12 and 4x2 from 11” to 20’. Ink Jet Printer.

Shaker Pan Waste Conveyor (under saw).

Excludes Incline Waste Conveyor (adjacent to saw). Extra Set of Blades. Installation Available (quote upon request). $18,500 NOW $14,500 FOB WI. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Saw Trax Panel Saw Saw Trax brand panel saw, with Bostitch model 1678 worm-drive circular saw, 15 Amps, 7 1/4" diameter blade, 5 foot x 9 foot frame limits. 120 volt, 1 phase electrical. $1,390 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Timbermill 620 Pro Component Saw 1 9 9 4 Ti m b e r m i l l 6 2 0 P r o , m o d e l MH6Pro-20, six blades cuts lumber from Speed Cut Metra-Cut Birdsmouth Saw 2x4 through 2x12, 4x2 lengths from 12” The center point is adjustable up to 6” to 20’ including four angle floor truss into the material for cutting of notches webs from 18", all powered movements (birdsmouth or seat cuts). Needs new scale and analog readouts. "Pro" model features pointer. Excludes Saw Blade and Infeed/ faster angulation movements and faster Outfeed Roller Conveyor. $2,500 FOB WI carriage speeds with soft-start technology.

Wasserman & Associates Includes chain-drag scrap conveyor with 800-382-0329 incline, extra set of blades. 480 volt, 3 phase www.wasserman-associates.com electrical. $22,900 FOB ID Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 Koskovich Omni Miser linear saw Roof truss AND wall frame square and angle cuts with print system B (both faces), Servo controlled angulation axis of movement, extended incline deck,(1) bulk feeder for up to 16 foot long lumber, (9) magazines for up to 16 foot long lumber: (1- 2x3, 52x4, 2- 2x6, 1- 2x8). Includes automated lumber advance (LASM), crooked lumber sensor (CLS), auto exit roller, vibrating trash pan, 5 HP, 3450 RPM arbor motor, computer monitor, console, spare blade and all available spare parts. 230 volt, 3 phase saw electrical. 110 volt, 1 phase computer electrical. $85,900 FOB KS Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

May 2017 #10214 Page #17

Don’t Forget!

NEW! New Square 1 Rolsplicer New Square 1 Rolsplicer, splices 2"x3", 2"x4" and 2"x6" lumber with a 3 to 4 second cycle time. Presses the lumber together prior to imbedding plates. Embeds plate lengths up to 19 inches. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 480 volt, 3 phase electrical. Other voltages available. $17,409 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 Omni Miser Saw Automated Wood Processing System. Model RT (Roof Truss Components). Cuts 2x3, 2x4, 2x6, 2x8, 2x10 & 2x12 up to 16’ in length. HP Motor with 16” Blade. Incline Live Deck. 7 Magazine Feeders (3-2x4, 2-2x6, 2-2x8).

Bulk Feeder. Ink Jet Printer (One Face). Grizzly 2 Bag Dust Collector.

$89,000 NOW 77,500 FOB NE

800-382-0329 | www.wasserman-associates.com SAWS

1994 Timbermill 620 Pro Component Saw 1 9 9 4 Ti m b e r m i l l 6 2 0 P r o , m o d e l MH6Pro-20, six blades cuts lumber from 2x4 through 2x12, 4x2 lengths from 12” to 20’ including four angle floor truss webs from 18”, all powered movements and analog readouts. “Pro” model features faster angulation movements and faster carriage speeds with soft-start technology.

Includes chain-drag scrap conveyor with incline, extra set of blades. 480 volt, 3 phase electrical. $22,990 FOB ID. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

1997 Mitek EasySet 1000 Component Saw • Five Blade Component Saw cuts up to 20' • (2) 16", (2) 20" and (1) 30" Blade • All Powered Movements • Digital Readouts • Powered Hold Downs • Belt Waste Conveyor (under saw) • Incline Waste Conveyor (adjacent to saw) ($17,500 FOB MD) Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

MORE THAN JUST A PRETTY FACE.

THE HUNDEGGER TURBO DRIVE SAW IS A FAST, ACCURATE AND VERSATILE, FULLY AUTOMATED LINEAR SAW SPECIFICALLY DESIGNED TO CUT STRUCTURAL COMPONENT PARTS.

Hundegger continues to stretch the cutting capabilities of our industry by providing a single saw with options that can perform basic drilling, milling and printing operations in addition to 4 -axis cutting.

Hardly another “pretty face”, the TURBO Drive is a solid evolution of the popular SC Series saws. This workhorse, like all of Hundegger’s production saws, benefits from their experience learned from a wide variety of wood cutting and milling applications from over 4,700 saws to date. Specific to our wood component industry, the TURBO Drive has been thoroughly developed for world-wide customers prior to its introduction to the US. Regardless of your cutting application, be it I-Joist, dimensional 2x lumber, or any variety of EWP, we have the experience and equipment to efficiently bring your job to market.

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi ðV ÊUÊÇÈx Çx£ ä

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #19

Adverti$er

Don’t Forget!

You Saw it in the SAWS

Production Worker Training Classes This week-long class with 8 hours of training per day will teach:

Timbermill MH6C-20 6 Blade Component Saw Timbermill Model MH6C-20 component saw. Six blades including (1) 30” blade, (3) 22” blades, and (2) 18” blades cut lumber from 2x4 through 2x12, 4x2 lengths from 12” to 20’ including four angle floor truss webs from 18” with all powered movements.

Includes scrap conveyor with incline, operating manual, and spare set of blades.

460v, 3 Phase power. $16,990 FOB TN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 MiTek Combi-Cut 4-Blade Saw 1994 MiTek Combi-Cut component saw, model 2000 Combi Cut, serial # CO15, four-head saw with powered angulation, Cuts from 1 foot at 90/90 to 20 foot lengths, angles from 10 to 105 degrees, digital angle readouts, power angulation, power length.

Cuts 4x2, four-angle floor webs from 19".

Includes under-saw waste conveyor (no incline), two extra 16" blades, manual and all available parts. Saw in use until end of January, 2016. 480 volt, 3 phase. $15,990 NOW $13,890 NOW $8,990 FOB MI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

• Understanding shop paperwork • Proper plate placement • Grades of and picking lumber • Setting up trusses • Saw training • And all things SAFETY After working in the Truss and Component Industry for 4½ decades, I know how to train employees properly, especially new hires.

To schedule a class at your truss shop or wall panel plant, call 931/981-5781 and ask for Don or e-mail: don@trussconsulting.us

2004 TCT Model 1100 Linear Saw Cut 2x4 and 2x6 Lumber from 3” to 20’.

Tops, Bottoms, Webs, Sliders, Wedges and Scissor Bottoms. 230 Volt / 3 Phase 5 HP Motor with 24” Blade. Ink Jet Printer.

Scrap Conveyor. $36,900 NOW $28,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Used Hain Quick Rafter Cutter 2 Available Board Sizes: 2x4 and 2x6. Motors: Two 2 HP / 220 Volt or 440 Volt / 3 Phase.

Saw Blades: 7 1/4” Carbide Tipped (set at 45 degrees). Angle Adjustment: Manual Rotation with Air Brake. Air Supply: 90 PSI. Carriage: Steel Rails with Steel Dual V Rollers. Pedestal: 3/16” Formed Steel with Powder Coat Finish. Saw Housing: 1/2” Billet Aluminum. Covers: 10 Gauge (1/8” thick) Steel with Powder Coat Finish.

Fully Enclosed for Safety. 2 Available $5,000 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Don Cernuto Former Operations Manager Apex, NC

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1999 Holtec Transcut II Bunk Saw Holtec Transcut II bunk cutter station features 20' fixed frame assembly, 3/8" Stellite armored guide bar, 3/8" chain saw chain, automatic chain tensioner, rack & pinion movement, and automatic shutoff.

460V, 3 phase power. $19,900 FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

New Spida Automated Apollo Saw The Spida Apollo saw with Automation is a computerized, pull-arm type saw used for cutting either wood truss components or wall panel cutting and represents the lowestcost way to add an automated single-blade saw to your operation. Features include angle cutting from 10 to 170 degrees, 36 inch scarf cuts, patented variable stroke limiter for safety, solid frame and arm design, 17 inch industrial touch screen with enclosure, 7.5 HP motor, plug and play wiring making installations easier and includes cowls for adding a dust extraction system.

$48,680 - FOB NZE/IN

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

What’s That?!?

Just another innovation from ACER, makers of the Ranger RS Lumber Retrieval System.

Meet the most advanced vacuum pickup system in the industry, designed and built by ACER specifically for handling lumber. An automatic self-cleaning feature ensures reliability in dusty environments. The compact integrated vacuum shoes provide simplicity, speed, and pick-after-pick reliability, even with dense engineered lumber.

Reduce costs and keep your linear component saw buzzing with the proven Ranger RS.

RANGER RS was formerly sold under the Wood Runner name. RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244. Other patents are pending.

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #21

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

SAWS

manufacturers’

1998 Auto Omni 5 Blade Component Saw 5-blade automated component saw includes [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console cuts 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°.The saw has been very well maintained, and consistently upgraded since new including latest software version 7.2.2 running on MS Windows 7. Saw has received ​OEM upgraded lumber in-feed including 2x3 indexing, and upgraded guarding. Features belt waste conveyor with side pans complete and set of available spare cards, sensors, etc. 220v/440v 3ph, 110/220v single phase, 90 psi air required. $34,880 FOB MN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1994 Koskovich Auto Omni 5 Blade Component Saw 5-blade automated component saw includes shaker waste conveyor, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade.

Fully automated setup with full power length and all axis angulation, single sided setup from operator console cuts 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°. Includes ink-jet marking system, remote monitor, and any available spares and manuals.

208/240/480 volt, 3 phase, and 110//220v single phase electrical required. $26,990 FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Wood Runner FastFrame Wall Panel Marking Saw The Wood Runner® FastFrame™ wall panel marking saw is the fastest, easiest way to cut and mark wall panel components. Feeds lumber up to 100" per second with a retraction rate up to 200" per second. Users report a 50% reduction in production time when compared with previous automated cutting and marking saws. Processing material from 2x4 through 2x15 is achieved with an aggressive 80 tooth,12" blade. The FastFrame cuts with a chop saw function for 2x4 material, then with guided "plunge" expansion for cutting material from 6", up to 15" in width. FastFrame marks boards with the next generation Matthews I-Mark V84i, DOD 8000+ MAXI inkjet for edge printing plate layout pattern (face printing available as an option). Base saw cuts 90º, the FastFrame also completes angled 45º cuts and compound cutting each optional. The FastFrame is as safe as it is fast with guard panels on the back of the saw, and a fully enclosed saw chamber. A true world class, state-of-the-art solution for wall panel component processing at an affordable price. Starting at $89,900 FOB MN.

765-751-9990

NEW!

Safety Speed Cut Model 7000 Panel Saw Safety Speed Cut model 7000, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence.

208/230/460 volt, 3 phase electrical. $8,149 Base, FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

1998 SpeedCut Centerline Saw with Speed Measure Centerline radial arm saw includes centerpoint cutting, turntable cutting system, 20 ft. speed measure system with 20 ft. infeed conveyor, 10ft. outfeed conveyor. 230 volt, 2 phase electrical. $8,990 FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Speed Cut Saw with Hain Measuring System •Speed Cut Metra-Cut Saw (5 HP / 3 Phase) •20’ Hain Powered Measuring System •Cutting Depth of 6” with 16” Blade •Angular Capacity of 164 Degrees •Saw Barrier Guard •Turntable Air Brake $8,300 NOW $7,000 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Representatives

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. Works with the optional WoodRunner TM lumber retrieval system. 440 volt, 3phase. $169,000 Base Price, FOB MO.

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

Considering Equipment? Consider Clark.

For over 40 years, Clark Industries, Inc. has been supplying the building components industry with manufacturing equipment, parts, and exemplary customer service.

Roof Truss Gantry Systems Multi-Head Truss Presses Jack Table Presses Floor Truss Machines Wall Panel Subcomponent Presses Column Laminators Post Nailing Machines Truss Handling, Conveying and Stacking Systems Custom Equipment

With a complete full-time machining, stamping, welding, and fabrication facility, our equipment is built in-house, proudly in the USA. We take great pride in our work, so contact us at 800/743-9727 or general@clark-ind.com today for OEM equipment and service!

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #23

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

manufacturers’

Representatives

NEW!

$139,000 FOB NE CMF 14' x 148' Roller Gantry System with Roof Truss Stacker 2 Each - CMF Stealth 14’ x 36” Diameter Roller Gantries (Track Mounted). 18 Each - Walk-Thru Steel Top (Drilled & Tapped) Tables with Skatewheel Ejectors. Unistrut Jigging at 24” Centers. Jig Hardware and Bridge Plates. Powered Exiting Conveyor with Skatewheel Receivers. CMF Stealth 14’ x 24” Diameter Finish Roller. Approximately 150’ of Powered Outside Conveyor. •3 Each - Four Pedestal Peak-Up Roof Truss Stackers. The buyer to assist the seller with equipment dismantle and loading. Add a Third CMF Stealth 14’ x 36” Diameter Roller Gantry for $14,500

800-382-0329 | www.wasserman-associates.com

New Square 1 - 40’ Trackless Floor Truss Gantry New, table guided (NO rail) floor truss machine by Square 1 Design & Manufacture.

This well designed machine builds floor trusses up to a standard 26 inch depth (32 inch optional). Working length of 40 feet. Other features include side eject, flip jig for build side, pop-ups for back plate side. Clamping by under-table cylinders controlling above-table steel fence. Floor truss gantry features twin 7.5 HP gearmotors for a total of 15 HP, 24 inch diameter roll, safety bars, 3 7/16” diameter, full-roll-length shaft with baffles. 440 volt, 3 phase. Price includes installation supervision from the manufacturer.

Also take advantage of the Square 1 factory promotion offering a $5,000 savings on a Rolsplicer or Floor Truss Finish Roller (FTFR) with the purchase of a new SQ-Series floor system through April 15th, 2016. $99,412, FOB IN

765-751-9990

www.woodtrusssystems.com

le! b a l vai A s 0! em 9 t 7 s , y 3 ed S ps $ h o s t i s rb ils & a Refu r 10’ or f w e d n r w/ s! ona l e a L i c spe Call t n re cur

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #24

Willful Blindness Culture Willful blindness is the common practice of knowing that something is wrong, but either pretending that the problem does not exist, or being unwilling to make a change or even discuss the issue. I was inspired by a TED talk video about the willful blindness of the town residents of Libby, Montana. Their willful blindness pertained to what they were experiencing after being contaminated with terrible, cancer-causing asbestos. This town’s major employer was a company that mined vermiculite, which is the toxic form of asbestos. Since the company was such an important employer of many of the town’s residents, the people in the area did not want to even contemplate the idea that their families were endangered in any way by the mining processes. What was noted by investigators was that the cancer death rate was higher there than anywhere else in North America. Too many people were dying at much earlier ages than they should have been. As it was, the vermiculite turned out to be everywhere, including playgrounds, schoolyards, and their homes. To this day, Libby, Montana is a major hazardous cleanup site for the U.S. government. To view the TED talk about this, see: (https://www.ted.com/talks/margaret_heffernan_the_dangers_of_willful_blindness).

I have discussed this hazardous cleanup site in Libby, Montana because it is an extreme example of the very common condition called “willful blindness.” Statistically, willful blindness happens in about 85% of all companies; therefore, the likelihood of it happening in your organization is very high. But what does this mean for you? It means that your company is doing things that are hindering profitability, but people are unwilling or unable to correct the bad practices. These practices can be both small and large, but they have one thing in common: They are practices that people know are wrong and the company should not be engaged in them. I have yet to perform a consultation and not find multiple examples of willful blindness within the companies.

Why are people unable to correct the known problems, or at the very least, speak up and tell others about them? There are many reasons, but the two biggest reasons are a fear of retaliation and feelings of futility because such behavior is a part of corporate culture. When people do speak up about these problems, they are viewed as troublemakers because, as a result, someone else may no longer be looked at in a positive way. In other words, in doing so, these people are butting into someone else’s area of responsibility and authority, which leads them to be perceived as a threat in some way.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #25

The two leading causes for willful blindness are: ! Protecting One’s Perceived Power Change may require responsibility shifts and realignment; therefore, people will interpret change as a threat to their area of authority (Major Cause of “Willful Blindness”) ! Failed Leadership Example Real, positive change comes from the top down in all organizations. Those who have no authority and are trying to make changes in an organization will be undermined by those who do.

(Major Cause of “Willful Blindness”) The lean manufacturing culture is in direct opposition to willful blindness.

Lean manufacturing is all about putting forth a team effort and implementing better practices. When I give a consultation, it is my job to break through all the roadblocks and help companies adopt proven and practical lean practices so they can perform better. Not the B.S. theoretical ideas, but real-world truss and wall component lean practices that make significant positive changes.

I am often saddened to hear companies tell me that they need to make certain changes to address their known problems before they invite me to perform my services. This is like cleaning your house before the maid comes over. More often than not, this is code-speak that indicates a company needs to move someone out of a position of authority because that person (or group of people) is unwilling to make the changes needed for improvement.

When a company is underperforming, most leaders are willing to make hard choices and not let anything or anybody stand in the way of making the needed positive changes. However, why are so many companies so willing to except low net profits and even negative returns for periods of time before they are willing to face the facts that something must change? Well, it comes down to one’s ego and the willingness to make hard choices. Setting one’s ego aside and listening to an industry expert is not always easy. Most of the time it is changing a company’s practices and making some investments, but not always. Sometimes you truly have the wrong people that are hindering others. In other words, these key people are causing a culture that is willfully blind to the fact that other people in the company want to help you make positive changes.

Do yourself a favor and discuss this topic with your people. You may find multiple examples of willful blindness in your organization. After having this conversation, when you are finally ready to take the big leap, give me a call so I can help you make the necessary and positive changes that will increase your net profits. It is with these best practices that I have helped over 100+ companies. Lean manufacturing practices, accurate time estimations, best practices for all departments, and better communications inevitably allow companies to make greater gains.

Todd Drummond Consulting LLC. Website: www.todd-drummond.com Phone: 603-748-1051 Email: todd@todd-drummond.com Copyrights © 2017 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

www.todd-drummond.com

todd@todd-drummond.com

(603) 748-1051

#1 in Total Recommended Consultation Services in Our Industry

#1 in Actual Consultations for Our Industry (100+ Different Companies) #1 in Testimonials of Past Clients in Our Industry (~ 1/3rd of all clients are willing to give us a public recommendation)

√

TDC is Lean Six Sigma Certified

#1 in Comprehensive and Refined Consulting Services with Proven Results

For almost 15 years, TDC has proven time and again that we are the go-to experts at reducing cost and improving productivity in all departments of wood truss and wall panel manufacturing. Go beyond the typical truss plate and equipment vendor recommendations for your operations and do what so many others have dared to do.

All Services are Tailored per Client Needs: √ Consulting  Proven and Practical Methods for Better Productivity in All Departments  Lean Manufacturing Principles Simplified and Tailored for Your Company √ Labor Time Standards for Accurate Truss Labor Estimations √ Multi-Page Review with Performance Spreadsheet for Linear Saws √ Prospectus Services for New Wood Truss & Wood Panel Manufacturing √ AppWright Software - Fantastic Web-Based Workflow, Scheduling, and Communication Tool for the Wood Component Manufacturers, Lumberyards and Home Builders √ Financial Service Referral Agent to a Firm that is Specialized for the Industry.

Almost 1/3rd of past clients have provided positive public testimonials of services.

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #27

Wood Truss Systems

TRUSS EQUIPMENT

manufacturers’

Representatives

NEW! Jager 14’ x 24” Diameter Finish Roller (2) 5 HP Motors. Front & Rear Safety Bars.

Checked & Repaired in March 2017. Video available upon request. FOB AZ $19,500 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

12' Finish Roller Press Press was purchased used in 2006, painted and wired for service but never utilized.

An excellent press for smaller wood components including jacks and valley sets. 120V, 1 phase power. $6,490 FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Vertical Truss Stacker by Square 1 Manufacturing

1996 Alpine 79 Foot Roof Truss Gantry System Alpine tracked roof truss gantry, 14’ x 79’ working length system includes (1) 14’ x 24” diameter, model 720 gantry head with 7.5 HP motor, (11) 70” wide tables with steel bottom chord, drilled & tapped, plastic and strut above, (7) truss ejectors, (9) receiving arms, 12’ conveyor rollers consisting of (8) powered roller conveyors, (26) idler roller conveyors, (1) 15’-6” x 20” diameter, model 705 finish roller press with 10 HP motor, all available aisle pads, jigging hardware, track, electrical S/O cord supply. 440V, 3 phase electrical. $62,990 FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

1996 Alpine Mighty Mite 1996 Alpine Mighty Mite beam press, model 745, 27 foot long, 5 foot wide, 5 HP drive, 12 inch wide platen, plastic table top and twin lever-arm controls. 208 / 230 / 460 volt, 3 phase. $13,990 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New, vertical stacker by Square 1 Design & Manufacture, up to six pedestals to handle up to 100 foot long spans. Features I-beam construction, holds from 10 to 25 trusses based on truss size, shape and weight, integrated drive tube for simultaneous stacking action and support during rotation, dual high-torque braking gear motors, adjustable tension clutch, heavy-gauge aluminum uprights with rubber bumper stops and automatic controls. The controls allow jogging the stacker both in forward and reverse directions and can be set up for multiple stacks of trusses. 440 volt, 3 phase electrical. Other voltages available. $31,067 BASE, FOB IN.

765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW! CMF 12' Roof Truss Gantry System 75​'x 12' side-eject system (90' OAL with dual park area) f​ eaturing: 11 soft-top wood/ plastic, 12'x72" tables with Uni-Strut puckrails, (11) skate-wheel ejectors to powered transfer roller. Includes two (2) CMF 12' x 24" dia. gantries, one 1988 and one 2005, both with top-side riding platforms, two button motion control,​ for continuous top use (no aisles). includes crane rail with base-plate and all available jigging hardware, ​208v, 3ph power , electrical supply rail, and air-manifold included.​ $40,900 NOW $34,900 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Table Guided Gantry System by Square 1 Manufacturing New, table-guided (NO rail) gantry system by Square 1 Design & Manufacture, sideeject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase electrical. Other voltages available. FOB IN.

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #28

What are the acceptable methods of plating a connector?

In a perfect world, our trusses smoothly flow from the assembly table to the finish roller without any problems.

Each connector, on both sides of the assembly, is adequately pressed and a completed truss is the result. Unfortunately, we don’t live in this perfect environment. Stuff happens. On occasion, after the finish roller stage, we have missing plates. Sometimes we have to remove a plate and replate. In both of these situations, dragging the truss back through the finish roller might be the most reasonable option. Sometimes it’s not. Particularly when you are running multiple set-ups through the same finish roller, or the truss is way out in the yard, or in some circumstances it’s already at the jobsite – then you will have to fix the truss where it is.

One of the most practical methods is to use a portable hydraulic press. This allows you to fix the truss where it is now, be it in your yard or at a jobsite. For example, the Eagle FRP15TM portable hydraulic press shown here is designed for field repairs. A portable press is efficient and convenient while offering some precision to your repair skills.

If you don’t have access to a device designed specifically for field repairs, however, then you may be tempted to just use a hammer.

The problem with the hammer method is that the ability to install a connector and not fold over the teeth is slim to none. Yes, there are those individuals who claim the ability to hammer perfectly, but I have never seen it done.

Another recommended method could be using a colliding device fabricated to deliver consistent level blows. The photo illustrates such a device. It’s a little more old school than a portable press, and perhaps a little more labor intensive, but it too provides some necessary precision for your repair efforts.

Whatever method you employ though, the most important rule is – make sure the teeth are not folded or damaged. Folded or damaged teeth do not contribute to the tooth count and don’t provide any load transfer.

In every situation, be careful that you perform a proper repair. The objective is to solve a problem, not create another one.

Glenn Traylor Structural Building Components Industry Consultant http://www.linkedin.com/in/glenntraylor PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #29

Adverti$er

Don’t Forget!

You Saw it in the

NEW TRUSS EQUIPMENT

NEW! Square 1 Trackless Roller Gantry System • •

Trackless Roller Gantry System 24” Diameter x 3/4” Wall x 14’ Long Gantry Roller

•

4” Diameter Stub Shafts Supported by 4 Baffles

•

Dual 7.5 HP Sumitomo Gear Motors

•

(4) Drive Wheels Run on Top of Table with (8) 3” Osborn Cam Followers Under Table”

Square 1 RolSpicer Chord Splicing System Call for Pricing FOB IN Equipment Details: • Splices 2x3, 2x4 & 2x6 Lumber •

3 to 4 Second Cycle Time

•

2 Recessed Simultaneous Activation Buttons

•

Soft Start” Inverter with Square 1 Easy ID Software

•

Guarded Motor & Sprockets

•

Flashing Motion Indicator Beacon Light

•

Greaseless, Maintenance Free Shaft Bearings

•

Front & Rear Emergency Shut Off Bar

•

•

Integral Mechanical Fail Safe Brake

Compact Design (59” Long x 42” Wide x 44” High)

•

Positive Press Tight Abutment

•

Hand Wheel Lumber Adjustment

•

3 HP Sumitomo Gear Motor

•

Add $1,425 for 20’ Infeed & 10’ Outfeed Roller Conveyor with Stands

•

Elevated Operator Platform

•

230 or 460 Volt / 3 Phase

•

Continuous Table (Steel, Plastic or Combination Top)

•

Liftouts for Side or End Eject

•

Table Mounted Electrical Track

•

Air Piping Manifold

•

Weg-It Jigging Hardware for Steel Top Table

•

Optional Wizard Ready Tables, Transfer Rollers, Exiting Conveyor, Finish Roller & Outside Conveyor. FOB IN | Inquire for Prices

Square 1 SQ-Series Floor Truss Machine (Table Guided)

NEW!

NEW!

NEW!

Wescana Roof & Floor Truss Press Equipment Details: • 50 Ton Hydraulic Press with 1 1/2” Thick x 24” Wide Pressing Platen •

Joystick Operation

•

6” Maximum Press Opening Height

•

8’ or 10’ Wide x 40’ or 45’ Long Table

•

1” Plastic Top over 1/2” Steel Plate

•

Unistrut Jig Rails at 12” Centers

•

208/230/460/575 Volt - 3 Phase - 15 HP Pump Motor

Buy Factory Direct From Wasserman & Associates for the same price as the Manufacturer PLUS get the added support and care you need to be up and running FAST! We’ll even help sell your used equipment too!

•

24” Diameter x 3/4” Wall x 6’-6” Long Gantry Roller •

6’-6” Wide x 40’ Long Steel Table (2-20’ Sections)

•

CNC Plasma Cut 3/4” Steel Table Top

•

3 7/16” Diameter Continuous Shaft Supported by 3 • Baffles • 1” Laser Cut End Plates with Internal Structural Tube • Frame • Spherical Roller Bearings

•

Twin 7.5 HP Sumitomo Gear Motors

•

•

• (4) Drive Wheels Run on Top of Table with (8) 3” • Osborn Cam Followers Under Table

•

120’ per Minute Adjustable Working Speed

•

”Soft Start” Inverter with Square 1 Easy ID Software

•

Flashing Motion Indicator Beacon Light

•

Front & Rear Emergency Shut Off Bar

•

Chain & Sprocket Guards

•

Integral Mechanical Fail Safe Brake

•

230/460 - 3 Phase

Supported by 6” x 4” Steel Tube Frame Clamping Rails & End Stops Built-In 1/2” True Arc Camber to Both Clamping & Side Rails Electrical Track & Air Cylinders are Under the Table Build up to 40’ Floor Trusses with Option for Additional Length

•

Floor Truss Depths from 9” to 26” with Option for Additional Depth

•

Optional Pop-ups, Flip Jig (shown in photos) & End Eject (shown in photos)

•

Add $3,680 for Installation Supervision

FOB IN | Call for Pricing

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

More than history, the TURBO Drive is German engineered to allow for maximum performance in a given application. With this base, precision performance is improved with software optimization rather than hardware changes.

This is apparent when the TURBO Drive was optimized for USA component cutting, the same world model saw runs significantly faster, simply by optimizing movements and stroke.

For a demonstration of how software upgrades accomplish this, see the “before & after” video at: https://youtu.be/3V5gmXbjQPU. It illustrates that software can increase throughput rather than redesigning elements of the equipment, your TURBO Drive does not become yesterday’s news because of a model number change.

FOR A DEMONSTRATION OF HOW SOFTWARE UPGRADES ACCOMPLISH THIS, SEE THE “BEFORE & AFTER” VIDEO AT: https://youtu.be/3V5gmXbjQPU

So how much would you pay for software that increases your cutting productivity and keeps your saw current with the latest technology?

How about zero? With the Hundegger TURBO Drive, free software updates for life are included with the saw. As software is optimized and performance is enhanced, you’ll never have to worry about what model you bought. For more information, visit http://www.woodtrusssystems.com/ manufacturers/general/hundegger-usa/

ÜÜÜ°7 `/ÀÕÃÃ-ÞÃÌi ðV ÊUÊÇÈx Çx£ ä

A-to-Z one roof the Eagle Metal advantage: every management solution, under

[ ] build it true every day SM

Manage your business your way by utilizing our comprehensive suite of products, services and solutions. It’s a strategic decision to make your production more effecient and your plant more profitable in the future.

This end-to-end approach simplifies your efforts and reduces your costs. So we’re able to bring your organization’s profitability to life with maximum results.

SM

It’s everything you need, in one place making the combination of the whole a complete integration that gives you the most bang for your buck.

Call us today for a free demo and how to put Eagle Metal’s solution suite to work for your business, your way.

CONNECTOR PLATES | ENGINEERING | DESIGN SOFTWARE | SUPPORT | EQUIPMENT EagleMetal.com

|

800-521-3245

|

12300 Ford Road, Suite 110, Dallas, Texas 75234

NEED EQUIPMENT? Tri-Axis Truss Press Continuous Style Table System •

100% Nail Plate Embedment on the Assembly Table

•

Single or Dual Hydraulic Pressing Cylinder Capability

•

Up to 60 Ton Pressing Capability

•

Presses 2x or 4x Without Any Adjustments

•

Standard Gantry Throat Widths from 8 to 16 Feet

•

Patented Joystick Controls

•

Ease of Maintenance

Tri-Axis Truss Press Walk-Thru Style Table System • • • • • • •

Aisles Ease Access to Trusses 100% Nail Plate Embedment on the Assembly Tables and on the Aisle Bridges (20" Aisles) Single or Dual Hydraulic Pressing Cylinder Capability Up to 60 Ton Pressing Capability Presses 2x or 4x Without Any Adjustments Standard Gantry Throat Widths from 8 to 16 Feet Ease of Maintenance

Heavy Duty Jack Table Press • •

• • • •

www.clark-ind.com

100% Nail Plate Embedment on the Assembly Table Dual Pressure System 30 Ton on Low 60 Ton on High (ex. Cap. 10" x 12" Nail Plate) Press 1x, 2x, 3x and 4x Dimensional Trusses 4, 5, 6, or 7 Feet Wide Options 20, 24, or 30 Feet Long Options Joystick Control Left/Right Operation

816 Callan Street, Monett, MO 65708 Phone: 417-235-7182 Fax: 417-235-8262 Email: general@clark-ind.com

Component Manufacturing dverti$er

May 2017 #10214 Page #33

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Working for you.

Our Service Department offers COMPLETE service, repair, rebuilding & retrofit services; in-house or on-site.

Eide Machinery Sales’ Complete Mechanical

1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Repair, with or without cosmetic repair, includes: ▶ Replacement of ALL drive train components ▶ Motor Brakes ▶ Bearings ▶ Chains ▶ Sprockets ▶ Shims ▶ Wear Strips ▶ Push-button Controls ▶ Electrical Harness ▶ Scales ▶ Gauges ▶ Calibration and Testing ▶ Warranty

Serving the Wood Product and Fabrication Industries ~ Since 1927

90 INERY SAL

INC 0 17

.

R

AT

We know machinery.

E

−2

H AC

EB

Alpine Tables with Rail Quantity of five (5) 6' x 14', Alpine tracked gantry tables with slotted steel bottom chords, HDPE plastic tops and (4) skate wheel ejectors. Includes 39' of 80 lb. crane-rail with base plate, and one air-valve control. $12,490 FOB SC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

CEL

PHONE: 800-289-5627

Keep what’s working for you,

S,

Alpine Mighty Mite Press 6’ x 29’ Table. Hydraulic Press with Ride Platform. 480 Volt / 3 Phase. The motor and several of the hydraulic components have been replaced in the last couple of years.

Video available upon request. $6,900 NOW $4,950 FOB MI. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

EMSI Complete Mechanical Repair IDACO WEBMATIC

IN

27

Klaisler 14' x 80' Side Eject Roller Gantry System • •Klaisler 14’ x 24” Diameter Gantry Roller (Track Mounted) • •12 Each 6’ x 14’ Steel Framed Plastic Top Tables with Ejectors • •460 Volt / 3 Phase $49,500 NOW $44,500 FOB MD. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1996 Alpine 79 Foot Roof Truss Gantry System Alpine tracked roof truss gantry, 14' x 79' working length system includes (1) 14' x 24" diameter, model 720 gantry head with 7.5 HP motor, (11) 70" wide tables with steel bottom chord, drilled & tapped, plastic and strut above, (7) truss ejectors, (9) receiving arms, 12' conveyor rollers consisting of (8) powered roller conveyors, (26) idler roller conveyors, (1) 15'-6" x 20" diameter, model 705 finish roller press with 10 HP motor, all available aisle pads, jigging hardware, track, electrical S/O cord supply. 440V, 3 phase electrical. $62,990 FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M

Two C-Clamp Presses with Unistrut Jig Table •2006 Mitek TK8 Klincher C-Clamp Press •Used Panel Clip Klincher C-Clamp Press •10 Ton C-Clamp with Trolley •Press Roof (2x4) or Floor (4x2) Trusses •115/230 Volt - 1 Phase - 2 HP Motor •Unistrut Jigging and Stands (build two 40’ trusses at the same time) •Add Third Panel Clip Klincher C-Clamp Press for $5,000 $19,500 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

EIDE

A

Th e

G 9 0 Y E A R S!

19

Machinery ~ Supplies ~Since 1927~

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #35

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

Wood Truss Systems

manufacturers’

2 Each - CMF Stealth 14' Roller Gantries (Track Mounted). 16 Each - Steel Slotted Top Walk-Thru Tables with Skatewheel Ejectors. Powered Exiting Conveyor with Skatewheel Receivers. CMF Stealth 14' x 24" Diameter Finish Roller. Excludes Outside Conveyor. Add $12,500 for 2007 Laharco Sense-A-Plate Plate Detector. $110,000 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

(2) Klaisler 14' x 24" Diameter Gantry Rollers with Floor Mounted Rail. (14) Plastic Top Tables with Unistrut Jigging & Skatewheel Ejectors. Drilled & Tapped at Bottom Chord. Powered Exiting Conveyor.

Tee-Lok 14' x 24" Diameter Finish Roller.

Idle Outside Conveyor. Custom Built PeakUp Truss Stacker. $112,500 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1995 Klaisler Side Eject Gantry System

M ACdverti$er

Th e

Representatives

omponent

anufacturing

Serving the Structural Building Components Industry

160’ x 14’ side-eject system with Koskovich Jet-Set auto jigging tables. Features (11) plastic top Jet-Set combo tables with skate wheel ejectors and (7) plastic top 56" Klaisler tables with skate wheel ejectors with 15" aisles and 4' OC Jet-Set pucks. Includes (2) Klaisler GR14-24 24" recessed rail gantry with riding platform and soft start, Klaisler 24" final roller, (16) powered conveyor rollers and (16) idler rollers. includes all available jigging hardware and bridge plates. The Jet-Set needs to be calibrated and one of the gantry heads needs new electrical i​nvertor. 230v, 3 phase electrical power.

$139,990 FOB OH 765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

Representatives

NEW!

NEW! New Component Table with Skatewheel Conveyors • Lift & Extend Skatewheel Conveyors • 10’ x 10’ Work Area with Squaring Lip • Gun Holster & Nail Tray

$8,250 FOB NE 800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

New Square 1 Short Roof Truss Finish Press Four-foot* wide x 3 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: Other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls available at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #36

Adverti$er

Don’t Forget!

You Saw it in the

TRUSS EQUIPMENT

NEW!

Square 1 Vertical Truss Stacker

2002 Pacific Automation Peak-Up Auto Stacker • 4 Truss Racks with Lifting Arms • Truss Racks hold 40 Trusses & Indexes Automatically • Stack Trusses from 24’ to 80’ • Stacker Control Panel • 100’ of 14’ Powered Truss Conveyor • 460 Volt / 3 Phase • Available Late May / Early June $23,900 NOW $21,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Engineered to operate through all seasons. Sumitomo High Torque Break Motor (no air or hydraulic unit to maintain). 35 Second Cycle Time. Each pedestal will hold from 10 to 25 trusses depending on truss size & weight. Floor Truss Stacker (stack 14’ to 50’ trusses). Roof Truss Stackers (stack 14’ to 50’ or 20’ to 70’ trusses). Agricultural & Large Residential Roof Truss Stacker (stack trusses up to 120’). Powered Outside Conveyor. Control Panel

1997 Mitek Mark V Truss Press with 14' x 46' Table • Mitek Mark V Gantry Press (Track Mounted) with 14’ x 3’ Platen • 15 HP / 50 Ton Hydraulic Press • 4 Wheel Drive • 14’ x 46’ Drilled & Tapped Steel Table • Unistrut Jigging at 24” Centers • The truss ejectors have been removed • The buyer is responsible for equipment dismantle The seller will provide forklift and • forklift driver $37,500 FOB MD. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’

Representatives

NEW!

Gang Nail Modular Swing Press Gang Nail model 59200, 4’ x 15’, modular 50-ton swing press truss assembly system.

Presses dimensional lumber in 2" x 4" or 4" x 2" orientation. Includes 36" wide, stationary platen with hydraulic drive and joy-stick control. Opposite sides of table slide under press platen to set plates in lumber. 208V, 3 phase power. $27,990, FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Klaisler Receivers (14)

New Square 1 Short Roof Truss Finish Press New, Square 1 “short” finish roller press (FRP), Four-foot wide (other widths available) x 1 1/2” tall throat. The unique “uni-body” construction creates a ridged machine that houses 12” diameter rolls, 7 1/2 HP motor with integrated brake, emergency photoelectric shut-off and 80# chain drive. This FRP features 114 FPM speed, emergency shut-off bars, and full chain and sprocket guards. Available options include: other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls. 480 volt, 3 phase electrical.

Other voltages available. $15,750, FOB IN

765-751-9990 PHONE: 800-289-5627

Quantity of fourteen (14), air-actuated Klaisler receivers, 14 foot long, skate wheel conveyors with stands. Feature slotted side columns and air cylinders to move receiver arm. 30 1/4" from bottom of base plate to top of skate wheels. 100 PSI air required. $15,400. FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2014 CMF Peak-Up Roof Truss Stacker 2014 CMF peak-up, vertical, roof truss stacking system with 3 HP drive system with new motor and gear reducer, autoindexing, receiver arms, holds up to (30) trusses from 16 foot to 50 foot in length, up to 14 foot height, with 22 second average cycle time. Adjustable bridge/arm starts cycling process, bundle indexes back 1 1/2" as each truss is stacked. Four lifting arms work in unison. Includes (80) foot of conveyor, consisting of (10) powered conveyors and (8) idler conveyors. Push button pendant controls. 480 volt, 3 phase electrical. Available to ship in May of 2017. $18,990, FOB MI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

Adverti$er

Don’t Forget!

You Saw it in the

NovemberMay 1st, 2015 2017 #08196 #10214 Page #24 #38

New Productivit Wall Panel Manufac PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M m ACdverti$er

Th e

omponent

anufacturing anufaCturing

You Saw it in the

• • • • • • • • • • •

PHONE: 800-289-5627

Adverti$er

Don’t Forget!

•

ty in cturing

NovemberMay 1st, 2015 2017 #08196 #10214 Page #25 #39

FEATURES One Tool System (Change from Staples to Nails in Minutes) Programmable Fastener Patterns wit PLC Touch Pad Entry Accommodates 2”x4” and 2”x6” Walls Straight Line Stitching Away and Towards You Bridge Tilt at Sheathing Seams to Eliminate “Shiners” Adjustable Bridge Speed for Accurate Alignment Auto Return to Park Section on Tool Bridge Laser Pointer for Identifying Fastener Placement Powered Height Adjustment (8’ to 12’ Wall Height) Pop-up Skate Conveyor Cantilever Table Which Allows Floor to be Free of Obstacles Optional Stud Locators

$69,900 $67,500

Installation Support Available in the US & Canada

See More On-Line at

www.wasserman-associates.com Ph: 800-382-0329

Fax: 402-761-2422

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #40

Adverti$er

Don’t Forget!

You Saw it in the

WALL PANEL EQUIPMENT

Sheathing Station with Screw bridge uSe the link to View our neweSt Video or ViSit our PanelS PluS channel on youtube, httPS://youtu.be/VngidgPhjaw ,

cuStoM wall lengthS

Manual router bridge with auto return to hoMe Station

866-PAN-PLUS www.panplus.com PHONE: 800-289-5627

1999 Triad Custom 2-Station Wall Panel Equipment Special built, 1999 Triad combo framing table with Gen II sheathing table, 20tool nailing bridge, router bridge and all available floor grating. Builds walls from 4'-0" to 14'-2". Includes pop-up conveyors, 16" & 24" stud locators. Sheathing bridge includes side-shift feature, push-button controls, manual bridge travel. Router bridge includes router. No tool dollies, fastener tools or tool mounts included. OEM parts are available at additional cost. 120 volt, 1 phase electrical. 100 PSI air required.

Price: $34,990 NOW $20,000 Location: IL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

DeWalt Panel Saw Vertical panel saw, 10 foot long, utilizes 13 amp 120v industrial saw motor, DeWalt circular saw with 8" blade, crosscuts material up to 64" wide and 1 1/2” thick.

Included PDF service manual. $2,100 FOB QC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Used PortaFramer Mobile Framing Table •Wall Heights from 7’-9” to 10’-6” •Stud Locators at 16” Centers •12” White Spoke Wheels $8,500 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

Basic Automation 16' x 12' Framing Table Wall Lengths to 16’, Wall Heights to 12’3”. Powered Height Adjustment. Stud Locators at 16” and 24” Centers. Squaring Stop. Excludes Tool Dollies. NOW $5,500 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Triad 3-Station Wall Panel Line Used Triad equipment includes (1) model DQ Framer with stud locators at 16" and 24", tool dollies and skate wheel lift-outs, (1) DQ Squaring table and router bridge with auto-return, 10'-3" wall height x 16' panel length, (1) Gen II model SQ squaring table with single-beam, multi-tool bridge with auto return and laser pointer, stitch function, manual travel control, (19) mounts and (19) Bostitch staple tools. Squaring and sheathing tables are installed in-line to allow for longer panels. System includes Triad panel lift, electric hoist and (1) Gen II SH sheathing table (shown outdoors, in poor condition).

120 volt, 1 phase electrical. 100 PSI air. $52,990 NOW $39,990 FOB: TN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders.

Stainless Steel Push-In Air Line Fittings.

Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329 FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #41

Adverti$er

Don’t Forget!

You Saw it in the

WALL PANEL EQUIPMENT

Triad AutoCol Sub-Component Nailing Station Triad model "AutoCol" sub-component nailing station with infeed and outfeed conveyors. Builds stud-block-stud, L's, T's, headers and trimmers/jacks. Touch screen controls, laser pointer, runs in manual or batch mode. Conveyor infeed and outfeed tables are each 6' wide x 10' long x 34" height (adjustable height) with 15" long roller conveyors. Twelve (12) tool stations, six per side. Internal transformer for PC included. Tools and mounts not included.

100 PSI air and 208 volt, 3 phase electrical. $15,990, FOB PA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Viking FasTrac Model FX-1000 Portable sheathing bridge utilizes a single fastening tool (nail or staple) and simple touch commands to program fastening patterns in 1/10” increments. Laser sighting, verifies stud centers while sensors detect the presence of sheathing According to OEM an 8’ wall can be fastened @ 6” OC in <6 seconds. 10’ wall height capacity, 16’ OAL, two man operation, 120Vac drive motor, 10 CFM @ 100 PSI air required for tool. $3,390, FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154

Reconditioned with warranty.

Reconditioned Robbins Super Torque Gantry for use with line retrofit with WizardPDS® ChannelS®.

Installed February, 2016.

Eide Machinery Sales offers complete reconditioning services for your truss manufacturing equipment – or as an option to our used equipment sales. Add years of service life to older, time-tested equipment. What’s more, Eide Reconditioned equipment features a warranty that meets or exceeds the original equipment manufacturer’s warranty – we are that confident.

Installation and Operator Training is included, or available, with any purchases from Eide.

Contact Eide Machinery today to reinvest in what’s been working for you.

We know machinery.

E

INC

IN

017

27

EB

R

Machinery ~ Supplies ~Since 1927~

−2

CEL

AT

.

EIDE

INERY SAL

S,

M

90 H AC

G 9 0 Y E A R S!

19

Toll free 800-344-EIDE | www.eidemachinery.com 3219 North Second Street Minneapolis, MN 55411-0397 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

• Available in any length: from 16’ to 80’ • Handle wall heights from 3’ 9” to 16’3” • Options: Speed Motor, Stud Locators or LightBar compatability, Power Conveyors.

• Choice of toolbar bridges and tool dollies.

• Control

Quality

• Control Consistency

• Control Costs Shown prior to hammercoat finishing.

Triad Machines

has more bridge options (nailing, stapling, or routing) & more tool dolly options than anyone in the industry.

126

A

Th e

Component Manufacturing dverti$er

You Saw it in the

Wood Truss Systems

manufacturers’

Adverti$er

Don’t Forget!

May 2017 #10214 Page #43 WALL PANEL EQUIPMENT

Representatives

NEW! Panels Plus 16' x 12' Squaring Table with Dual Beam Panel Bridge SQUARING TABLE Lengths to 16’. Powered Height Adjustment (7’ to 12’ wall heights). Foot Pedal Control Roller Conveyor & Squaring Stops

CLICK HERE for more information New Panels Plus Wall Panel Framing Equipment

Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches.

This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality.

Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages.

Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge.

Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

765-751-9990

www.woodtrusssystems.com

Wood Truss Systems

manufacturers’

​ omplete interior/exterior system builds walls from 4'-6" to 12’-4” high and C up to 20’ in length. System includes Triad model G2 adjustable framing table, 20' panel length with tool dollies,16" and 24" stud locators. Tool dollies have two (2) tool mounts. Framer has pop-up skate wheel ejectors. Triad model G2 SH-SQ, 20' power adjustable sheathing combo table with sheathing bridge, featuring laser guide, power return, and mounts for up to 23 Hitachi nailing tools, and 20' router table with manual router bridge.

System also includes Ingersoll-Rand SSR-EP20 20 HP 79 CFM rotary compressor with tank and dryer, Northfield model 410 upcut saw including infeed conveyor and Alpine manual length measure with 1' lumber stops, Triad model FTCN sub-component nailer, two (2) Triad sub-assembly tables, Safety Speed Cut vertical panel saw, 2-ton hoist with caliper-type panel lift, 60' of conveyor and all available spare parts, nail tools, and nails. 120v, 3 phase power. $58,990 FOB ND

PHONE: 800-289-5627

OPTIONS Add $4,800 for 17 Paslode Nail Guns & 15 Paslode Staple Guns (currently mounted to the panel bridge) Add $2,500 for Installation Support Labor (plus travel expenses) Add $1,500 for Wall Panel Lift (excluding hoist & beam) Add $1,750 for 1 Pair of 15’ Skatewheel Conveyor with Stands

$47,700 NOW $39,900

EQUIPMENT FINANCING available from SLS Financial Services Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Representatives

Triad Wall Panel Equipment Package

765-751-9990

WALL PANEL EQUIPMENT

DUAL BEAM PANEL BRIDGE Tool Spacing at 6” Centers with 3” Bridge Shift. Power Drive with Auto Return. Bridge Tilt on One Beam (for nail guns). Laser Pointer. Panel Bridge Pendant Control

www.woodtrusssystems.com

2002 PCS Wall Panel Line System includes Power Framer nail-onthe-fly framing table builds 8’ to 12’ wall heights, workers remain stationary as the wall continuously and automatically moves through 6 high-capicity nail guns. Framer transitions to Powered Squaring Conveyor for finishing openings and subcomponents.

Exterior walls are squared and sheather through a 24 tool, single-beam bridge with plate stitchers. Finished walls transition to stacking queue conveyor with Smart-Crane wall panel stacker which stacks walls.

Includes all available system hardware/ spare parts. Three phase power, 120vac for PC, and air at 100 psi required. $39,900 FOB MD Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

Triad "Diamond Quad" Wall Panel Line (Enlarge Picture for Details) Triad “Diamond Quad” Framing Table with Tool Dollies. 20’ Roller Conveyor with Stands. Triad “Diamond Quad” Squaring Table with Multi-Tool Bridge.

Excludes Nail/Staple Guns. The equipment is currently stored in a trailer. The trailer can be purchased for an additional $2,000. $17,500 FOB WI. pdf link for photos Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

WALL PANEL EQUIPMENT

IBS Sub-Component Nailer Assembles Trimmers, Jacks, L’s, Channels & Headers • 2x4 thru 2x12 Capacity • Remote Fire & 3-Way Clamping • Squaring Stop • Foot Pedal Control • 5’ Infeed & Outfeed Roller Conveyor • Includes Hitachi Nail Guns $9,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com •

TRUCKS & TRAILERS

May 2017 #10214 Page #45

Adverti$er

Don’t Forget!

TRUCKS & TRAILERS

2005 Pratt 48' Roll-Off Trailer •Sliding Tandems with Spring Suspension •Hydraulic Neck •Galvanized Headboard •Brakes: .500” shoe remaining •Tires: 3 at 16/32”, 3 at 12/32”, 2 at 8/32” •Roller Pin Locks •(1) Load Control Plate •Ground Rollers •Aliminum Tool Box •Add $35,000 for 2004 Kenworth T800 Day Cab Tractor (191K Miles, 370 HP Engine, 10 Speed Transmission) $19,000 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Kenworth T800 Day Cab Tractor • 190,696 Miles • 370 HP Engine • 10 Speed Transmission • Aluminum Wheels with Good Rubber $35,000 FOB MD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1990 Wabash 47-70 Foot Stretch Roll Off Trailer 1990 Wabash model SE, 47 to 70 foot stretch roll-off trailer, fixed tandem axles, fifth-wheel tractor connection, sloping bed/ gravity offload, locking rollers with brake control, ABS brakes, current Indiana DOT inspection (March 2016), 1/2" to 3/4" deep tire tread. $18,990, FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

2005 Precision Equipment 36'-51' Expandable Roll-Off Trailer • • • • • • • • •

2006 Stoll 28' Gooseneck Roll-Off Trailer

Sliding Tandems Hydraulic Neck Air Ride Suspension New Brakes (95% Remaining) Tires are 90% Remaining Roller Pin Locks & Brakes Winches & Straps DOT is current The 2005 Freightliner Columbia Single Axle Truck is also for sale $23,000

• •Two 12,000 LB Axles (GVWR 13,900 Lbs) • •Hydraulic Pump & Hoist • •Electric over Hydraulic Brakes • •Brakes & Tires have 70% remaining • •Locking Rollers • •2 Rollers on Gooseneck • •Winches & Straps $16,900 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

$28,500 NOW $26,900 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com

A

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Wood Truss Systems

manufacturers’

Representatives

NEW!

Precision Gooseneck Trailer Precision 36 foot gooseneck trailer​s​are designed to ​deliver ​smaller truss loads or​ trusses into l​ ocations that are not typically accessible with longer truss trailers. Standard features include​: Hydraulic roller load control, electric over hydraulic disk brakes, self-contained power unit, 5" rollers with 2 foot on-center-spacing, sealed ball bearings on rollers, roller on top of gooseneck, 12" x 19" w-beam frame and gooseneck, mesh between rollers, rear dovetail, 4" winches, 2 spring loading landing legs, patented strap locks, 10,000# also axles, and dual wheels.

Options include 5th wheel coupler, 4" x 35' load straps, air ride suspension, and electric over hydraulic drum or disk brakes.

Precision gooseneck trailers also come in 32' length and 101" width.

$29,500 Nicely Equipped, FOB ND 765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

LASER ACCURACY. INCREDIBLE VALUE. NO SERVICE AGREEMENTS.

SL Laser never makes customers sign a costly service agreement. All service and installation is taken care of from SL’s North American headquarters in Charlotte, NC. No-excuse customer service from SL earns praise from their customers without signing an annual agreement. Isn’t that the way it should be?

GREEN LASERS ARE SIGNIFICANTLY EASIER TO SEE THAN RED LASERS. SL LASER’S ADVANCED COOLING OF THE DIODE INCREASES THE LIFESPAN OF THE HEADS.

Today’s laser technology saves time and improves quality in producing roof truss, wall panel, and floor panel elements. SL Laser combines technical ingenuity and years of wood component industry experience to deliver a package that provides easily measurable savings. Setup times are dramatically reduced, production processes are simplified and quality improved. Easy to control and virtually maintenance-free devices ensure the safe flow of your production and have a fast return on investment. SL Lasers work seamlessly with any structural component design software.

SL LASER HEADS ARE SIMPLE TO MOUNT AND CAN WORK WITH NEARLY ANY CEILING HEIGHT OR CONFIGURATION.

For over 15 years Wood Truss Systems has been a driving force in implementing laser projection in component plants throughout North America and beyond. Let us develop a custom configuration and complete price quote for your facility, and see how worldclass laser technology can work for you to increase margin and quality while reducing set-up times on your most complicated components by as much as 70%.

LASERS IMPROVE ACCURACY AND PRODUCTIVITY OF ANY WORK FORCE. IT IS THE EASIEST AND MOST COST EFFECTIVE WAY TO GET GREAT RESULTS, REGARDLESS OF EXPERIENCE OR LANGUAGE.

www.WoodTrussSystems.com • 765-751-9990

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #47

Adverti$er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

Wood Truss Systems

manufacturers’

Representatives

NEW! 1990 Ford F800 Truck with 1982 Barns Truss Trailer

2001 Sterling L9500 with Rand Rolloff Bed 2001 Sterling model L9500 straight body truck with Rand 26 foot long, 96 inch wide roller bed, 310 HP Cummings engine, Eaton Fuller 10-speed transmission, 33,000 GVWR, single rear axle, 200,000 miles.

Roller bed tilts with controls (gravity offload) located in truck cab and includes pop-up rollers, headache rack and ships up to 36' long trusses. Two front tires are new.

Half tread on the balance of tires. Half tread on brakes. DOT expired in March of 2015. $38,990 FOB CT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Precision Stretch Roll-Off Trailers

Precision ​Equipment ​Manufacturing​has evolved with the wood component industry over the past 15 years and is emerging as the premier trailer and​roll-off trailer suppliers in the industry. From vastly improved manufacturing standards including establishing in-house finishing (sandblasting and paint) to investing in facilities capable of producing world-class delivery systems Precision is living up to their name. Their ​truss delivery​ designs are based on y​ ears of experience i​n delivering component packages for area manufacturers. Best practices are coming together to deliver a first-rate equipment and even better customer service​to insure your deliveries are made reliably and safely throughout the life of your Precision trailer.

Price based on configuration, FOB ND.

765-751-9990

1996 ASI 48'-70' Stretch Roll-Off Trailer •Sliding Tandems •Hydraulic Neck •Tires are good •DOT is current $22,000 NOW $17,500 FOB IA. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1994 Dorsey 48’ Flatbed Trailer •48’ Long x 102” Wide •Tandem Axle •Steel Wheels •Headache Rack •Winches & Straps •2 Trailers Available $7,500 FOB IL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• • • • • •

A

Th e

www.woodtrusssystems.com

Component Manufacturing dverti$er

NEW!

Serving the Structural Building Components Industry

2017 Precision Equipment Roll-Off Trailers

Like Money in the Bank.

Service you can count on!

PHONE: 800-289-5627

2000 Haulin' T-30 Rolloff Trailer Condition: As-Is, Where-Is 2000 Haulin' rolloff truss trailer, 48 foot long, sliding tandem axles, fifth wheel tractor connection, hydraulic lift, locking rollers, lights in working order, 70% tire tread and 60% brakes. $11,990 FOB MN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extend-a-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System.

Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #48

Robotics in the LBM & Component Industry

Ben Hershey, President, Coach, & Mentor 4Ward Consulting Group, LLC

A book I read in 2015, “Rise of the Robots,” by Martin Ford, talked about the threat many people see that robots present to the employment marketplace. At the time, I was working with several different equipment manufacturers and clients on their automated/robotic equipment applications for the LBM and component industry, so from my perspective I saw process improvement and a healthy balance between people and machine in any operation. As I continue to work with clients on robotics and advanced computerized equipment, I refer to this book and others as reference for owners when they are presented with this dilemma.

Each process in our component plants or lumber yards needs to be efficient and eliminate waste. When a company reviews any process the first question should be “why?” Why does the process exist? Is it efficient? Does being more efficient give the customer (or next user/process in line) what s/he wants? We can also look at robotics with these questions and assess it from two perspectives – one operationally (the lean process) and the other as a long-term investment.

The Lean Manufacturing Process Companies do not stay in business by being unproductive and inefficient. Companies in manufacturing industries want to maintain as many efficient processes as they can. Industrial robots integrated into lean manufacturing processes provide a way for companies to increase efficiency and quality while decreasing waste. Implementing lean methods involves changing a facility’s layout and procedures to reduce unnecessary steps, movements, and other waste. Waste, as we have discussed, occurs when tasks that are not “value-added tasks” take place. A value-added task physically adds to or manipulates a product in a way that increases its value. For example, walking to and from an office to get the right paperwork for a truss batch is not a value-added task—the time away from the gantry is considered waste.

Eliminating as much waste as possible and focusing on value-added tasks is the heart of lean methodologies.

Rosie the Robot on your Manufacturing Line This is where robots enter the automated process and lean manufacturing. Robots can move product more efficiently than humans without excessive movement during the process. Robots do not shut down during shift changes. Robots also remove the possibility of defects that occur with human manufacturing. Most importantly, the decision to use robots must be justified by a return on investment (ROI) analysis. Small and large manufacturers have proven today’s robots can significantly improve the ROI in a manufacturing environment, especially when implementing robots in support of a lean initiative—but again, planning is critical. The robots must be properly incorporated into the overall lean manufacturing environment to achieve the desired results.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #49

Robots are not as costly as human workers, and robots eliminate overtime.

Robots work 24/7 with no breaks, which can increase productivity significantly, while higher throughput increases profits. Manufacturing robots produce products much faster than conventional manufacturing methods by decreasing part cycle times. Manufacturing robots lend themselves to creating a leaner, more efficient manufacturing cycle.

There has been a long-standing myth that industrial robots will lead to substantial unemployment; but that is just not true.

The choice is robots or continuing to hire very low cost, low skilled laborers, producing poor quality product; and that is assuming you are able to find those employees. By utilizing robots, manufacturing will remain competitive, as costs will be reduced as much as 60%. Labor will not be eliminated completely but rather elevated to a higher skill quality. With robotic work cells, there is still a need for people to operate the robots—the book by Martin Ford includes this point and I want to emphasize it too.

One of the greatest challenges I hear often with my clients is the tight labor market. Robotics provide not only a lean advantage but also a balanced approach to providing you the ability to compete and continue to expand market share. Not only are we competing with each other for assemblers, sawyers, forklift operators, material handlers, etc., but we compete with our customers in the field for the same individual. In a tight labor market that does not appear to be changing in the next generation, automation and robotics provide a logical solution for your operation.

Examples of How Robots Make the System Lean • No wait time for operators – A material handling robot can be set up to multi-task, performing additional processing tasks between operations.

• Negligible downtime –Manual operations tend to be error-prone and inconsistent in terms of production rate, shifts, work breaks, etc., but robots have minimal production loss and “no smoke breaks.”

• Lower operating expenses – Robots are less expensive to operate compared to human labor (especially when overtime is required) and robots’ return on investment can be quickly realized when there is high demand for the manufactured product.

• Higher quality – Robots are capable of highly accurate, highly repeatable tasks, which results in lowered scrap parts once the robot tasks are optimized.

• Lower impact of environmental conditions – Robots do not get fatigued and are not subject to heat, dust, humidity and other challenging work environments.

• Ease of multi-tasking – Today’s robots can incorporate tool changers to allow the robot to handle more than one task.

With one robot now able to perform multiple functions, the manufacturer will see improved utilization and the ability to create a leaner manufacturing environment overall.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #50

The Future Lean Robot Lean manufacturing is thinking “out of the box.” Removing time, effort, and cost from the manufacturing processes is the solution to lean manufacturing and competitiveness. Robotic applications mean flexibility in design and capabilities—not just motion. Designing lean robotic applications is important to

achieving ground-breaking solutions to ordinary manufacturing tasks. Many times our industry has been, shall we say, behind the curve when it comes to technology advances. But over the last fifteen years, we have seen multiple advances in several areas.

Even so, we need to fundamentally change our thinking and change how we are manufacturing a truss, a wall panel, etc., if we are to remain relevant and competitive. Robotics is one piece of the puzzle that will assist us.

In May 2000, I wrote an article for WoodWorks Magazine, “Maximizing Your Investment in State-of-the-Art Equipment.”

Back then, I was already encouraging manufacturers to look at labor and consider equipment investments for the future. Wow! Oh, to have our current knowledge, get in my “way back machine,” and invest even more heavily then. But the point remains the same—a company must have a strategy each year of evaluating the equipment it will need. You may need to work with your financial institution, other investors, or the equipment manufacturer, but you will need to make the capital investment in advanced technology equipment to meet the needs of the future.

If you have not explored incorporating robotics into your operational environment lately, it is probably time to take another look. With a lower cost, more capabilities, and a large number of successful manufacturing implementations, robots can increase your return, improve quality, reduce costs, and help you eliminate waste. Remember, if we can be of assistance to you, it would be our pleasure to help you, give us a call!

Ben Hershey is the CEO of 4Ward Consulting Group, LLC, the leading provider of Lean Management and Manufacturing Consulting to the Structural Component and Lumber Industry.

A Past President of SBCA, he has owned and managed several manufacturing and distribution companies and is Six Sigma Black Belt Certified. Ben has provided consulting to hundreds of Component Manufacturers, Lumber Dealers, and Millwork Operations, and is highly recommended throughout the industry. You can reach Ben at ben@4WardConsult.com or 623-512-6770. © 2017 4Ward Consulting Group, LLC PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #51

Adverti$er

Don’t Forget!

You Saw it in the

TRUCKS & TRAILERS

1990 Wabash 47-70 Foot Stretch Roll Off Trailer 1990 Wabash model SE, 47 to 70 foot stretch roll-off trailer, fixed tandem axles, fifth-wheel tractor connection, sloping bed/ gravity offload, locking rollers with brake control, ABS brakes, current Indiana DOT inspection (March 2016), 1/2" to 3/4" deep tire tread. $18,990 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2000 Raglan 53' Roll-Off Trailer •Sliding Tandems •Hydraulic Neck •Roller Locks & Roller Control •Spring Suspension •DOT is current $19,900 FOB UT Wasserman & Associates 800-382-0329 www.wassermanassociates.com

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

2004 Hot Shot 43' Roll-Off Trailer Hydraulic Raised Roller Bed. GVWR: 24,000 Lbs. Tandem Axle. Tires: 23516. Electric Brakes. Headache Rack.

Manufactured by R & R Truck & Trailer (7-26-04). $9,500 NOW $8,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1997 Road Boss 48’ Gooseneck Trailer Triple Axle Trailer. $7,250 FOB NV Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Start smarter...

Grow faster...

Achieve more...

Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108 Phone: 412-262-3225 Fax: 412-262-1154

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

FOR REAL INNOVATION, NO ONE BRINGS MORE TO THE TABLE THAN US.

WOOD RUNNER® BRAND MACHINERY NOW INCLUDES: The improved AirPickTM Lumber Retrieval System and new for 2017: FastFrame™ Wall Panel Marking Saw

On your production table and throughout your plant, Wood Runner® wood manufacturing equipment combines unmatched technology and innovation to deliver greater productivity where you need it most. From our AirPick™ lumber retrieval system to our FastFrameTM wall panel marking saw, and in other advanced new products we’re developing, you’ll find a passion for doing things better with performance enhancements to match. Contact us and let’s see what we can bring to the table for you.

Visit www.woodrunner.com or call 507-322-3700 to learn more today. ®

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #53

Adverti$er

Don’t Forget!

You Saw it in the

Wood Truss Systems

MISC.

manufacturers’

Alpine Lumber Carousel Alpine model 407A, lumber carousel features (7) lumber bays each with 14 ft. max lumber lumber length (without overhanging the bay). Hydraulic drive with reservoir, 40' working diameter. 480v, 3 phase, 30A electrical. See video link and PDF shown with this listing. $9,690 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 Challenger Wood Grinder Model CH200-3037-S. Vibrating Infeed Conveyor. Oufeed Material Blower. Motor: 27 KW Brook Hansen (480 Volt / 3 Phase).

Cutters: Small FIXCUT @ 58. Screen: 1/2” @ 2 Sections. NOW $13,900 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Alpine Lumber Carousel - NC HD carousel feed system with 7 stations, handles material to 16’. Includes toggle controls and 10 HP motor to power systems hydraulic power unit. $9,680 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Four Arm Infeed Deck Price: $7,890 NOW $3,990 :: FOB PA 10' long x 10' wide 4-arm infeed deck, powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase.

Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

UsiFab Chord Splicer UsiFab chord splicer splices 2"x3" through 2"x6" lumber. Presses the lumber together prior to imbedding plates. Imbeds plate lengths up to 13 inches. Features heavy-duty tubular frame, dual-recessed, simultaneousactivation buttons, guarded motor, sprockets and a 3 HP motor. 600 volt, 3 phase electrical. Price: $8,990, Condition: Good, Location: QC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt).

•Pressure Pump & Vessel. •Lightly Used.

•Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 Alpine PF90 AutoMark System • Wall Panel Plate Cutting & Marking Saw • Automated Length Stop & Ink Jet Printer as directed by Design Software Output • Cuts & Marks Both Top & Bottom Plates Simultaneously up to 20’ in Length • 10 HP Motor with 20” Blade • 240 Volt / 3 Phase / 30 Amps $39,900 FOB BC Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Representatives

Wood Runner AirPick The next generation Wood Runner® AirPick™ is a giant step forward in automated lumber retrieval systems and is up to 30% faster than the old screw-driven system.

The old style lumber retrieval system used screws to pick up lumber, but the AirPick has found a new faster, better way with suction. As a totally automated system, the AirPick eliminates the costs and limitations associated with manually fed saws. The AirPick is incredibly safe, with active monitoring of the work area, the gantry can slow or completely stop itself to avoid people wandering into the work area. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Miser, Alpine's ALS, Hundegger TURBO, Monet DeRobo, and other linear saws. Feel free to watch our videos and click on any photo to see additional shots in our gallery. For more information regarding this new innovative machine, get back to us by phone or e-mail! From $124,900 FOB MN.

765-751-9990

www.woodtrusssystems.com MISC.

Alup 80 HP Compressor 80 HP Alup (​ A ​ llegro​series)​, model SCD80, rotary screw compressor with 11,418 hours.

From the manufacturer's website, "Produces a minimum of 60.4 CFM, up to 303 CFM, at 75-190 PSI. Features a high efficiency drive motor with loss-free, direct drive transmission for optimal efficiency". 460 volt, 3 phase electrical. $22,990 NOW $19,900 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Read/Subscribe online at www.componentadvertiser.com

36" x 72" Wood Framed Material Carts Swivel Casters. 8” Diameter Phenolic Wheels. Over 60 Carts Available at $100 Each. FOB NE. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Miscellaneous Used IBS Equipment •IBS Multi-Tool Panel Bridge (excludes Squaring Table) •2 Sets of IBS Light Bars •IBS Auto Stops FOB OR Wasserman & Associates 800-382-0329 www.wassermanassociates.com FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #55

MISC.

NEW!

New Sub-Component Nailer •

Assembles Trimmers, Jacks, L’s, Channels & Headers • 2x4 and 2x6 Capacity • Remote Fire & 3-Way Clamping • Staggered Nail Pattern • Squaring Stop • Foot Pedal Control Reserve Air Tank • 5’ Infeed & Outfeed Roller • Conveyor $16,500 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW! Spida Simple Stop •20’ Length Stop with MDF Bench Top •Available in Lengths up to 60’ •7” Color Touch Screen Entry of Cut Lengths •110 Volt / 1 Phase •Excludes Saw, Outfeed Conveyor, Freight & Customs Charges •10’ Spida Simple Stop - $8,920 •20’ Spida Simple Stop - $11,340 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge.

Wired for 230 volt, 3 phase and 30 amp electrical service. $22,677, FOB FL | AS NEW. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Tee-Lok Lumber Stacker $6,500 FOB MB Canada.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 Weima - Lenze Wood Processing System Weima model WL4S shredder, 30 HP drive with gearbox and limit switch, 10" diameter single-shaft with 1/2" grid screen, 23" x 41" hopper opening, PLC controls and 0.74 cubic yard hopper volume. A two-step wood processing process. Wood waste goes from the incline into the Weima grinder, to the short auger piece, then the 20' long auger at an incline, leading to the Lenze grinder.

Includes $1,000 worth of replacement knives and other available spare parts.

25,000 operating hours logged. Picture of output shown with listing. 230 volt, 3 phase, 100 Amp electrical. $37,990 FOB WI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Invicta DGI-40 16" Single Surface Planer (Used) •15 3/4” x 8 1/2” Capacity •25 & 46 FPM Feed Speeds •5,000 RPM Cutterhead Speed •7 1/2 HP Motor •230 Volt / 3 Phase •Powered Raise & Lower of Table $4,000 FOB WA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

New SL Laser Projection System New, laser projection system from SL Laser.

Projects roof truss, floor truss and wall panel design images accurately onto building Hain 20' Powered Measuring System surface, for faster setup and fabrication Adapts to Any Saw. Left or Right Hand times. Each laser head provides 21' Operation. Feet & Inches System (Stops projection length (@15 foot ceiling heights). at 12” Centers) or Inches System (Stops at Includes system computer, cables, mounting 10” Centers). Motor: 1/4 HP Linear Actuator hardware for attachment to customer's (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum structure, factory installation, training and Extrusion. Stops: Jig Bored Steel. Stop choice of green or red laser. Works with Blocks: Machine Billet Aluminum. Optional each connector plate manufacturer's design Lengths from 5’ to 60’. Optional Gang Stop. software. Modular nature of the laser heads Add $770.00 per 10’ Section of Heavy Duty allows for easy, future expansion of system Roller Conveyor with Stands length. 120 volt, 1 phase. FOB NC Wasserman & Associates Wood Truss Systems 800-382-0329 765-751-9990 www.wasserman-associates.com www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $49,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2010 USIFAB Roof Truss Vertical/Flat Stacker 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. $63,980 FOB BC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2004 Cresswood Grinder System Cresswood model HF3630AST hopperfed grinder with 3/8" screen, features a Cresswood Destroyer cutter head. Available spare 5/8" screen, shear bars and bolts included. Features 36" diameter infeed, floor sifting action, 30HP motor, heavyduty steel frame, and fluid clutch. Includes Northern model 22 blower unit with 15 HP motor and Hytrol belt incline, 18" wide with sides x 24 feet long. 230/460 volt, 3 phase electrical. $21,990, FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

Toll Free 800-382-0329 www.wasserman-associates.com

WizardPDS®

drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #57

Adverti$er

Don’t Forget!

You Saw it in the MISC.

To uncover what’s possible,

NEW!

abandon what’s comfortable!

Fitzzgerald Group, LLC New Spida 20' Plate Marker (Aluminum Framed Table) 20’ of Aluminum Framed Table with MDF Bench Top. Spida Automated 20’ Length Stop/Plate Positioner & 10’ Infeed Roller Conveyor. Workstation, Control Cabinet Enclosure & 17” Touch Screen Integration Spida or MangoTech Plate Cutting & Marking Software. Cuts to 20’, Marks to 18’ Cut & Mark 3,000 LF of Plates per 8 Hour Shift. Length of Delay to Mark Board: 1/2 Second (can be adjusted). Compatible File Formats: .trs, .mdf, .mwf, .xml, .hay/hfs, .gwf & .tx. Includes 2 Day Onsite Training & Installation. Add $750 Annually for 12 Month Phone & Virtual Tech Support.

Add $700 for DeWalt Model DWS780 12” Double Bevel Sliding Compound Miter Saw Add $3,930 for Steel Framed Table with Roller Conveyor or MDF Bench Top. Excludes: Dust Collector, Saw Stand, Freight & Customs Charges. $25,599 FOB NZ Wasserman & Associates 800-382-0329 www.wassermanassociates.com

New Spida 20' Plate Marker 20’ of Steel Framed Table with Roller Conveyor or MDF Bench Top. Spida Automated 20’ Length Stop/Plate Positioner & 10’ Infeed Roller Conveyor. Workstation, Control Cabinet Enclosure & 17” Touch Screen Integration. Spida or MangoTech Plate Cutting & Marking Software. Cuts to 20’, Marks to 18’. Cut & Mark 3,000 LF of Plates per 8 Hour Shift. Length of Delay to Mark Board: 1/2 Second (can be adjusted).

Compatible File Formats: .trs, .mdf, .mwf, .xml, .hay/hfs, .gwf & .tx. Includes 2 Day Onsite Training & Installation. Add $750 Annually for 12 Month Phone & Virtual Tech Support. Add $700 for DeWalt Model DWS780 12” Double Bevel Sliding Compound Miter Saw. Add $8,920 for Spida 20” Up-Cut SnipSaw. Add $8,050 for Lauderdale Hamilton 24” Super Chop Saw. Deduct $3,930 for Aluminum Framed Table with MDF Bench Top. Excludes: Dust Collector, Saw Stand, Freight & Customs Charges. $$29,529 FOB NZ Wasserman & Associates 800-382-0329 www.wassermanassociates.com

“A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com

theHAINCOMPANY | 6125 Enterprise Drive, Unit 1 & 2 | Diamond Springs, CA 95619 | 530.295.8068 | sales@haincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Still feeding your saw the old-fashioned way?

Pick up the pace with the reliable Ranger RS from Acer!

www.acerinc.com RANGER RS was formerly sold under the Wood Runner name. RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244. Other patents are pending.

A

Th e

Component Manufacturing dverti$er Misc.

May 2017 #10214 Page #59

Adverti$er

Don’t Forget!

You Saw it in the Doors - Stairs - Beams

NEW!

Detects missing or misaligned plates. 16' Throat. 110 Volt / 1 Phase. Excludes CMF Finish Roller. Reference literature for additional details. $12,500 FOB ON. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller.

Conveyor with Stands. 240 Volt / 3 Phase. $15,000 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Doors - Stairs - Beams

Builders Automation Stair Stringer Router Column Laminating Press •Press 2” x 6” or 2” x 8” Columns (3 ply) •12’ Bench with Spring Loaded Rollers •Top & Side Pneumatic Clamping (electric controls) •Squaring Stop (swings up to allow repositioning and reclamping for longer column lengths) •Excludes Nail Guns for Manual Nailing $7,500 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Norfield Magnum Door & Jamb Machine Door Sizing/Beveling. Lock & Latch Drilling. Hinge Butt Routing in the Door & Jamb. Faceplate Routing up to 1 1/8” x 2 3/4”. Air Predrill & Air Screwdriver. Width: Doors to 4-0, Jambs to 10 1/2”. Height: Doors to 8-0, Jambs to 8-0. Thickness: Doors to 1 3/4”, Jambs to 1 1/8”. Butt Sizes to 5” x 5”. Butt Spacing: Infinitely Variable.

Lock Backsets from 2 3/8” to 5”. 230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Dotul Door Stop Stitcher Click Here for details $4,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Watch video here: http://goo.gl/gSRwjd More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com

Wood Truss Systems

manufacturers’

Representatives

remanufactured!

RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”.

Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”.

Wasserman & Associates 800-382-0329 www.wasserman-associates.com

B.A.M. CNC Stair Stringer Router Remanufactured, Builders Automation Machinery [BAM] model CNC/MFSR stair router. Does contemporary, box and open stairs, and is the only machine available that also cuts the top and bottom landings. Programmable with a large library stored in the machine for almost all box and open stringers. Remanufactured to include new wiring, rebuilt spindle motors, new drives and is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. Comes with a six-month warranty. A portable 4-bag, 3 phase vacuum which is switched on at the machine controls is available for an additional $1,568. Installation by the OEM is available at an additional charge. 230 volt, 3 phase, 60 amp electrical requirements. 120 p.s.i. at 35 CFM air requirements. $52,000

765-751-9990 Read/Subscribe online at www.componentadvertiser.com

www.woodtrusssystems.com FAX: 800-524-4982

Forward Thinking.

Respecting the Past.

Ask most people about the lumber industry and you’ll get a fairly predictable list of descriptions. What you’re not likely to hear are terms like: ● technologically advanced, ● sustainable logging, ● small log harvesting, ● green lumber products, ● commitment to healthy communities, and ● ecologically-minded forest management When people talk about Vaagen Brothers, that’s exactly what you’ll hear.

Working in the forests of Washington for more than 50 years, we’ve learned to take the best of traditional logging and lumber milling practices and combine them with advanced production technologies and forward-thinking sustainable forest management practices to create a company that’s as vibrant and growing as the healthy forests and ecosystems necessary to its success.

Contact us: (509) 684-5071 or info@vaagenbros.com

www.vaagenbros.com

Logs to Lumber Vi

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

The Next Generation of Building Professionals A

t the American Wood Council, our engineers develop state-of-the-art engineering data, technology, and standards for wood products to assure their safe and efficient design. They are also very involved in our work with building and fire codes, providing the technical background and research oversight that supports our efforts to ensure U.S. building codes allow the greatest appropriate use of wood products.

May is the International Code Council’s Building Safety Month and AWC is a proud sponsor of week one, with the theme “Mentoring the Next Generation of Building Professionals.”

Below, two of AWC’s engineers, Director of Education Michelle Kam-Biron and Project Engineer Lori Koch, and Northeast Regional Manager Matt Hunter explain why they pursued careers in the building industry.

What drew you to the building industry as a career?

Michelle: While I wasn’t drawn as much to general “engineering,” I was really excited by the specific specialty of structural engineering because it combined creativity of architecture and the logic and analysis of mathematics.

To be able to create, analyze, and see the final results of my efforts in a building that would be constructed and last for many years was great. Additionally, I saw it as an opportunity to make an impact by contributing toward a safe built environment for the general public.

May 2017 #10214 Page #61

Robert Glowinski is the President & CEO of the American Wood Council (AWC).

Lori: My junior year in high school I attended a presentation where some practicing engineers talked to us about what engineering was and what engineers do – my take-away was that engineers get to use a wide skill set to solve unique problems. I liked that it incorporated pretty much every subject I studied in school – math and science obviously are a big part of engineering, but the communication skills you learn in English and other writingoriented courses is invaluable to a successful engineer.

Matt: I got hooked at age 15, when I did my buddy a favor by filling in for him to build a large, two story garage. I ended up working construction the whole summer, finishing the garage. The following year work on the house began and I worked on everything from footings, foundation walls, framing, fire stopping, finish flooring, paneling, and trim.

After earning my bachelor’s degree in environmental design, a form of sustainable landscape architecture, I worked in landscape construction as a designer/draftsman for large commercial land development projects and became a building code official and inspector in the Commonwealth of Pennsylvania before joining AWC.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

MANUFACTURING WITH WOOD ISN’T ROCKET SCIENCE. Okay, maybe it is.

WOOD RUNNER® BRAND MACHINERY NOW INCLUDES: The improved AirPickTM Lumber Retrieval System and new for 2017: FastFrame™ Wall Panel Marking Saw Visit www.woodrunner.com or call 507-322-3700 to learn more today.

®

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #63

What should young people know about the building industry?

Michelle: Structural engineering as a profession can be challenging but, at the same time, it can be very rewarding to have a job that involves creativity, teamwork, problem solving, innovation, and protecting lives. How cool is that?

May is the International Code Council’s Building Safety Month AWC is a proud sponsor of week one, with the theme

“Mentoring the Next Generation of Building Professionals.”

How does your work make a difference?

Michelle: My work as a practicing structural engineer allowed me to create structures that provide a safe built environment for the general public, thereby protecting lives. Unfortunately I don’t think the general public really sees the impact that structural engineers have until there’s a structural failure. For my current job, I am educating other engineers and providing tools that will enable design professionals in the United States as well as other parts of the world to understand proper building codes and standards so that they can correctly design wood buildings.

Lori: I have a somewhat unique job compared to other structural engineers in that I don’t actively do structural design. Instead, like Michelle, I currently educate other engineers about how to design safe, code-compliant structures made from wood products. I make a difference every day by helping designers understand wood structural design standards, and this helps them design safer, more efficient buildings.

As a side note, those considering the profession should know that they are only limited by the depth of their own imaginations and their own mind set. I would encourage young engineers to not only concentrate on their job but to branch beyond the workplace and get involved with a professional organization. Also, do not be afraid to speak up, to seek advice from others, and to be aware that the relationships one creates throughout a career are very important to career growth.

Lori: Being an engineer doesn’t mean having to solve every problem by yourself. Most engineers work in teams, sometimes comprised of other engineers, sometimes made up of professionals from different disciplines. Everyone brings something unique to the table. Being part of a diverse team is one of the best things engineers can have early in their careers, because the problem is then approached from different angles which can help lead to innovative solutions.

Matt: If you put your mind to it, you can do anything! If you are interested in construction, architecture, engineering, building science, or any other related field, don’t be intimidated. Knowledge leads to familiarity, which leads to mastery of a subject. Interestingly, the first Master Code Professional I ever met was a mother of three, who also happened to be an accomplished and highly respected professional engineer in Pennsylvania. Try and get as much practical work experience under your belt as you can. Don’t be afraid to ask questions! Join your student chapter of the American Institute of Architects, the American Society of Civil Engineers, or your state building code official organization. Many of these organizations offer outstanding student scholarship opportunities which may assist you in reaching some of your educational goals. Don’t worry about making mistakes, but if you do make one, own it, and take responsibility for your actions. Strive to become a valued member of your organization’s team. Teamwork is an essential part of succeeding and getting ahead in this outstanding career field.

Matt: As part of the Codes and Standards group of AWC, I have 13 states and the District of Columbia, from Virginia to Maine as my territory. I get to travel to each of these states to meet and educate fire and building code officials who protect and serve the public every day as part of their jobs. I provide assistance to these public officials about wood and wood products, how they are used in the building, fire safety, and fire prevention codes, and keep them up-to-date on the latest technological breakthroughs regarding wood construction. I listen to their concerns and provide answers regarding any wood We want to inspire future engineers to see they too can change specific issues they may have. We work together to make the world, as AWC tries to do every day, by making our built the built environment a safer and more enjoyable place environment safe. to live.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A family owned business you can trust

www.vaagenbros.com www.vaagenbros.com

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #65

Adverti$er

Don’t Forget!

You Saw it in the

Lumber Briefs

By Matt Layman Publisher, Layman’s Lumber Guide

Countervailing Duty Preliminary Ruling...19.88%...Bearish For Lumber Duty Calculations...Who Pays What?

Preliminary CVD announced at 19.88%

T

Duties placed on the five companies investigated are listed below. The amount of subsidies the foreign producer receives from the government is the basis for the subsidy rate by which the subsidy is offset, or “countervailed,” through higher import duties.

West Fraser, 24.12%; Canfor, 20.26%; Tolko, 19.50%; Resolute, 12.82%; JD Irving, 3.02%.

The weighted average of those five companies’ rates determine the CVD rate for everyone else...19.88%.

It is important to note that the CVD’s for each company investigated was proportionate to their estimated subsidy from the Canadian government. The amount of Crown owned timber used versus privately owned timber has a bearing on the subsidy.

In general, eastern Canadian provinces use less Crown timber.

JD Irving, with substantial timber holdings, was penalized least.

he pieces are falling into place. Department of Commerce has issued its preliminary countervailing duty on Canadian softwood lumber exports destined for the U.S. The rate of 19.88% is lower than the anticipated 30%. In addition, the four largest producers of Canadian lumber will be exempt from retroactive duties. On two occasions this year, Canadian producers have boosted prices to build in a premium for the anticipated duties.

My estimate is that no less than 25% or $100 per thousand board feet of the current value of 2x4#2 SPF-W at $410 fob mill is duty Definition premium. I see this CVD as bearish for the lumber market.

An anti-dumping duty is a protectionist tariff that a domestic government imposes on foreign imports that it believes are priced Definition below fair market value. Dumping is a process where a company Countervailing duties (CVD) are meant to level the playing exports a product at a price lower than the price it normally charges field between domestic producers of a product and foreign on its own home market. producers of the same product who can afford to sell it at a lower price because of the subsidy they receive from their government. The “SPLINTER” Next on the agenda is Canada’s legal attempt to nullify, Critical Circumstances = 90-day Retroactivity reduce the CVD. At the same time, the Anti-Dumping case will Early afternoon on Monday, April 24, DOC released its be addressed. It is no secret that Canadian lumber mills sell to findings that the four largest Canadian lumber producers who had non-U.S. destinations at different prices when a duty is in place. been required to provide U.S. export data had not exceeded a 15% Canadian lumber buyers plan for it and expect it. increase, or surge that would have created the basis for “critical The splinter will be proving that the price in its home market circumstances.” Critical circumstances are required to implement is “normally” lower. For example, if the list price is the same for a 90-day retroactive duty. That was a huge win for the big four... every customer, plus all applicable duties, tariffs, taxes...and there West Fraser, Canfor, Tolko, and Resolute. That ruling means they are no penalties to add for shipping to Canada and China...there is are exempt from paying retroactive duty...saving them $millions. no dumping. However, if mill sales prices to Canadian companies JD Irving, a producer in eastern Canada, was found to have are normally lower than sales to the U.S.; there’s the rub. A simple surged shipments and will be taxed retroactively. Only the top four examination of invoices will reveal that truth. [And for the record, producers, who make 40% of Canada’s softwood lumber, will be I'll do the leg work for $200 per hour plus expenses and complete exempt from retroactive duties. All others, that produce the other the job in six weeks or sooner. That is a firm offer.]

60%, will be fined...costing them multiple $millions.

Looking Forward...ml These five companies’ total production and exports to the U.S. were subtracted from Canada’s total to determine that the A veteran lumberman, Matt Layman publishes Layman's Lumber remaining producers, and Irving, surged shipments. “All others” Guide, the weekly forecasts and buying advisories that help component manufacturers save money on lumber purchases every will be assessed retroactive duties. day. You can reach Matt at 336-516-6684 or matt@laymansguide.org.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #66

All things Wood

by Frank Woeste

1896 home from Sarasota County, FL

A Common-Sense Design to Create Durable Overhangs

By Frank Woeste and Joe Loferski

D

ecay, or wood rot, requires three conditions to be present: liquid water, oxygen, and a favorable temperature (generally between 35 and 100 degrees F). Of the three, the only factor that can be managed by building design is liquid water. Hence, overhangs of sufficient width are critical to protecting modern wood-based materials used in wood-frame house construction.

As the 1896 home from Sarasota County, FL shows, house designers understood the basics of protecting wood siding, wood framing, and wooden windows by using roof overhangs to shed rain water. Being that wooden buildings around the world have survived for centuries by utilizing pronounced overhangs and knowing water is the driving force of wood decay, we consider overhangs to be a “common sense” design approach for protecting and extending the life of wood and wood products used in one- and two-story wood construction.

PHONE: 800-289-5627

The use of overhangs for enhanced durability may be common sense, but the width of overhangs needed for protection of one- and two-story residential buildings throughout the U.S. is beyond common sense. A design method, based on location and stories, for utilizing overhangs and possibly offsetting floors in order to provide protection to the exterior building envelope (siding, trim, window and door frames) from rain water was published in Remodeling Magazine.

Overhangs as “Green Building” The benefits of overhangs are also recognized by the ICC/ ASHRAE 700-2015 National Green Building Standard that is available as a free “read-only” download: https:// builderbooks.com/book/green-building/icc-ashrae-700-2015national-green-building-standard.html. ICC/ASHRAE 7002015 contains a Section 602 on Enhanced Durability and Reduced Maintenance. More specifically, Section 602.1.2 Roof overhangs gives the recommended overhang width (and credit) for One- & Two-story Buildings based on “Inches of Rainfall” for both eave and rake overhangs:

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

602.1.12 Roof overhangs. Roof overhangs, in accordance with Table 602.1.12, are provided over a minimum of 90 percent of exterior walls to protect the building envelope.

Table 602.1.12 Minimum Roof Overhang for One- & Two-Story Buildings Inches of Rainfall(1)

Eave Overhang (Inches)

Rake Overhang (Inches)

≤40 >41 and ≤70 >70

12 18 24

12 12 12

(1) Annual mean total rainfall in inches is in accordance with Figure 6(2).

For SI: 12 inches = 304.8 mm

Adverti$er

Visit https://nationalmap.gov/small_scale/printable/images/pdf/ precip/pageprecip_us3.pdf for a color map to use with Section 602.1.2 Roof overhangs.

For a longer discussion of a design method for selecting an overhang length based on a specific location and the Climate Index, see http://www.remodeling.hw.net/how-to/a-commonsense-design-to-create-durable-overhangs_o to read our complete article in Remodeling Magazine.

When we combine common sense, wood science and design knowledge, we are much better able to build structures that will withstand the test of time.

Frank Woeste is Professor Emeritus, Virginia Tech University and a wood construction consultant.

Joe Loferski is professor of sustainable biomaterials at Virginia Tech University.

Comments may be sent to: fwoeste@ vt.edu.

Production Worker Training Classes This week-long class with 8 hours of training per day will teach: • Understanding shop paperwork • Proper plate placement • Grades of and picking lumber • Setting up trusses • Saw training

The Climate Index presented in our 2017 Remodeling Magazine article was based on 1) number of days in the month with 0.01 inch (0.254 mm) or more of precipitation, and 2) mean monthly temperature (°F). Even though the variables used for determining recommended widths of overhangs by the ICC/ ASHRAE 700 “Inches of Rainfall” method and the “Climate Index” method aren’t the same, the recommended overhang widths in various climatic regions throughout the contiguous U.S. follow a similar trend, increasing with likely rainfall events or “Inches of Rainfall” as defined by footnote 1 of Table 602.1.12.

PHONE: 800-289-5627

May 2017 #10214 Page #67

Don’t Forget!

• And all things SAFETY After working in the Truss and Component Industry for 4½ decades, I know how to train employees properly, especially new hires.

To schedule a class at your truss shop or wall panel plant, call 931/981-5781 and ask for Don or e-mail: don@trussconsulting.us Don Cernuto Former Operations Manager Apex, NC

To uncover what’s possible, abandon what’s comfortable!

Fitzzgerald Group, LLC “A blending of excellent services and products, with answers that work”©

WoodRunner Conveyors Inc. Viking Walls MaxCustomCutter Wizzard PDS Drop-In Channels Gorbel Crane Technology Just a few or our profit enhancing parts that can make you whole!

630 Southpointe Court - #200 Colorado Springs, CO. 80906 Read/Subscribe online at www.componentadvertiser.com

719-528-5445 RFitzgerald@FitzGroup.com www.FitzGroup.com FAX: 800-524-4982

DONâ&#x20AC;&#x2122;T LOSE PRODUCT FOR DESIGNERS DUE OFFICE CONDITIONS O

The

Herman Miller, Inc. 3D View

8-18-16 ACTON MOBILE 47H.ztx - Office Printed August 18, 2016 Drawing may not be shared without express authorization from author

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Design Manager Optional Divider

Cubicle with L shaped desk Overhead cabinet

Media Roo Plans Storage or added

RENT A MOBILE D TEAM SUITE TO Affordable | Available Nationwide |

AV AIL 48 A HO BLE UR I N S!

TION TIME TO POOR OR LACK OF SPACE.

e

JobLine.com Approved

Design Team Suite

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Cubicle with L shaped desk Overhead cabinet

Design Manager

Cubicle with L shaped desk Overhead cabinet

Media Room Plans Storage

Z-Axis® Software under license from Herman M

om

d

Designer Approved:

5.00 per MONTH!

DESIGN ODAY! Fast Delivery

REQUEST A QUOTE Thomas McAnally 800-289-5627x1 twm@thejobline.com

The

JobLine

.com

Careers in the Truss, Wall Panel

and Engineereed Wood Components Industry

JobLine Hiring Zone Job Opportunities Available Candidates Services & Products

JobLine.com, inc.

800-289-JOBS

The

May 2017 #10214 Page #71

www.thejobline.com

job opportunities available

JobLine Has Remote Truss and Wall Panel Design Jobs!

MiTek Sapphire or Alpine JobLine Senior Designer Rated Contact Thomas McAnally for additional information and requirements. mail@thejobline.com Light Gage Steel Truss Designer South / May consider Remote MiTek Aegis req. J10476

Truss Designer J12841 NC Truss Designer - Alpine J12833 IL

Truss Plant/Location Manager J12851 Remote Truss Designer - Alpine Req. NE Texas J12835 Remote Senior Truss Designer J12816 USA Multifamily Truss Designer - Alpine J12837 Georgia Truss Designer Multifamily/Single family J12792 Colorado Multifamily Truss Designer - Alpine J12837 South Carolina Truss Designer - Single Family Tract J12849 AZ Location Manager - Truss/Panel/ Remote Multifamily Truss Designer Lumber J12832 J12843 Remote - Eastern Time Zone Pacific Northwest WA/BC market Only Truss Designer / Senior Truss Designer J11689 Southwest Truss Designer J12846 Beautiful Charleston SC Outside Sales - Truss (w/wo Design) J12830 Southwest Remote Truss Designer J12845 Remote - Eastern Time Zone Only Entry Level Truss Designer/Cutting Technician J12834 IL Truss Designer/Estimator J10574 Texas Truss Plant/Operations Manager J12829 Iowa Multifamily Truss Designer J12842 SC Truss Designer J11700 Northeast Multifamily Truss Designer J12847 Northern Florida 1st Shift Production SupervisorSingle Family Custom Truss Designer Truss J12828 Colorado J12844 SC Truss Designer - MiTek Sapphire Operations Manager - Truss/Panel/ + J12804 South Site J12840 Outside Sales - Truss ++ J12822 Upper Midwest Midwest Outside Sales - Truss/Full Building Senior Truss Designer - Truss/Panel Materials J12827 J12803 TN DFW Texas area Truss Designer J12815 DFW Texas area

Truss Designer - Intermediate to Advanced J12796 Northeast Florida

Remote Truss Designer J12845 Eastern Time Zone Only

Senior Truss Designer / Truss Design Manager J12779 Midwest

PHONE: 800-289-5627

1st Shift Floor Truss Supervisor J12795 GA Truss Designer J12814 Central US

JobLine.com, inc.

The

800-289-JOBS

Senior Truss Designer - Truss/Panel J12803 TN Truss Designer with Panel and EWP/I-Joist experience J12724 Northeast Truss Designer with Panel and EWP/I-Joist experience J12712 Northeast Materials Manager/Lumber Buyer J12859 MN Regional Manufacturing Process Improvement J12858 Southwest Truss Designer - Truss/Panel/EWP J12778 Central Canada Senior Truss Designer - Truss/Panel/ I-Joist/EWP J12772 Texas Truss Designer - MiTek J12800 Midwest Production Manager/Plant Manager Truss J12797 Southeast Senior Truss Designer - Truss/Panel/ I-Joist/EWP J12777 Southwest Shift Foreman - Truss J12766 Ohio Truss Designer/Estimator (Panel Too) J12784 PA Outside Sales - Truss/Multifamily J10542 Midwest Multifamily Wall Panel Designer J11691 Midwest Production Manager - Truss J12786 South/Southwest Technical Outside Sales | Truss Design J12785 Southwest Production Manager - Truss J12780 South/Southwest EWP Designer J12757 Mid-Atlantic

Read/Subscribe online at www.componentadvertiser.com

Job Hunting?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Candidates seeking jobs: theJobLine.com, Inc. The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries.

A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. All you need to do is create a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time.

You can also specify your job, location, and compensation goals.

Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab.

FAX: 800-524-4982

JobLine.com, inc.

800-289-JOBS

The

JobLine.com, inc.

www.thejobline.com

The

800-289-JOBS

Design Manager/Senior Designer/PE/ Optimizer - Truss/Panel/EWP 30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open??

Thom's Notes: PE with Mid Atlantic seals Relocation: USA - South ID: C10897

Inquire

Time To Hire?

We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Available Candidates Truss/Wall Panel/Site Services Management Plan direct & control daily operations of wall panel & floor panel division. I Provided a complete plant layout and directed the installation and start-up of a 2004 PanelPlus wall panel line. Evaluate productions, plan and manage budgets and direct QC inspections. Provided wall panel designer training & developed design, production & quality control guidelines. Oversee the analysis of data and information and report to upper management. Provided Site supervision & training for home builders and framing contractors. Lead the planning, pricing, scheduling, administration, implementation & installation of all products, floor panels, wall panels, roof trusses & building materials. A typical 2 story house w/basement (1600 +/- sq./ft.) would be erected in 2-5 days ready for shingles. 20 years experience including Outside Sales, coordinating Estimating, Sales, Design, Production, Delivery and Administrative functions of the truss plant with builders, engineers, architects, home owners, project managers, contractors and store managers. Established work schedules, created designs, layouts and Cad drawings as needed. Supervised up to 3 designers, including training new designers.

Coordinated schedules, manufacturing, delivery, billing and job sign off. Resolved problems including collections as needed.

Proficient with MiTek, OptiFrame, and Microsoft Office software.

Relocation: AK, BC, ID, MT, OR, CO, WA, AB, Canada - Western/Central, HI, NV ID: C11220

Inquire

PHONE: 800-289-5627

May 2017 #10214 Page #72

Outside Sales - Truss/EWP/Lumber I-Joist/Framing Packages/Install Services As an Area Sales Manager, I have many roles. I visit my most of my customers weekly, which range from contractors in the field to lumber yards. I acquire needed documentation, design and price the job, and return the estimates in a timely manner. When the quote becomes a job, I communicate with our shop to fabricate the design. I also schedule deliveries, communicate with customers on delivery times and accurate directions, and once delivered, ensure accuracy and customer satisfaction. I strive to provide top level customer service to all my customers.

Products: EWP, Framing Package, Roof & Floor Truss, Site Install Services, I-Joists, Lumber, Hardware.

Relocation: USA - Southwest, USA Western Inquire ID: C12205 Technical Outside Truss Sales Truss/Panel/I-Joist/Framing Package Has existing roof and floor truss & wall panel clients for multifamily projects in a large area. IN addition to sales, estimating and design, the candidate has managed existing customer relationships, past due accounts, field problems and back-charges.

Perform sales seminars. Pre screen new contacts and gain their trust by designing, engineering, and estimating blueprints of residential and commercial plans.

Compensation: $60's base with $75k+ opportunity Relocation: IA, MN, ND, SD ID: C10996

Inquire Attention Employers We have over 1,000 registered Industry Professionals.

All Job Searches are not public!

We can search behind the scenes to find the right candidate for your opportunity.

See what I can do for you!

Thomas McAnally 800-289-5627 x1 twm@thejobline.com

Hiring Zone - Available Candidates Plant/Location/General Manager Truss Truss and Components Plant Manager with over 15 years of experience in the truss industry who is looking to apply knowledge gained while continuing to develop and grow within the management sector.

As Plant Manager: Create programs to motivate employees to achieve peak productivity. Hire, train, discipline and terminate employees. Order lumber and all production materiel. Coordinate weekly production, sales and safety meetings.

Research cost on purchasing new equipment.

Attended monthly city council meetings to ensure codes were followed. Oversee development of truss fabrication facility.

Ensure compliance with Cal OSHA and Dot. Oversee shipping and optimize freight costs. Responsible for training leads and supervisors on company policy’s. Program and operate computerized equipment.

Proficient with Microsoft Programs, Excel, Word, Outlook, ERP software Team growth and development through effective feedback and ongoing mentorship Excellent communication skills Experience working with: Metal, Polymer Blends, Components, Finished Product Assembly, Clean Room, etc.

Tenacious, Professional, Detail-Oriented, Strong Sense of Urgency Lean Manufacturing Certified, Kaizen Trained, Fork lift Certified Relocation: CA, CO, FL, HI, NM, TX, USA - ALL States, KY, TN, OR, WA ID: C10500 Inquire Production/Design/Location Manager Truss/EWP/Package Design and manage all truss operations. purchase all lumber and plates. Arrange payment and shipping. Troubleshoot every aspect including machinery. Implemented our OSHA safety plan and requirements.

Print invoices and remove material from active inventory using peach tree software.

Set up new customer accounts and validate credit references. Design wood and steel joists and headers. Assist customer project problems for the best economical and practical solution.

Prior: Truss design and supervise. Purchase building material. Arrange billing and shipping from start to finish. From the small detached garage to the large apartment complex, I have done them all...

Relocation: CA, USA - Southwest, USA Western, UT Inquire ID: C12276 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com

Read/Subscribe online at www.componentadvertiser.com

General Manager/Division Manager Truss/Panel/EWP/Lumber An energetic, out-of-the-box, problemsolving, executive with a science-based holistic approach to manufacturing, building products and other business operations; I am recognized for my vision, business acumen, integrity, work ethic and capability to cultivate durable professional relationships.

Practitioner of “Lean and JIT” manufacturing principles, setting metrics, improving key performance indicators, reducing costs, expanding production capacity and sales – all improving the bottom line. Skilled in business analysis, strategic planning, market and sales development; ability to drive multi-million dollar growth, institute “Best Practices” for small to medium emerging and expanding companies, managing budgets to $ 30M with full P&L accountability and oversight.

20+ Years of truss/panel/EWP manufacturing and business management experience. In 2006 at the height of residential construction distributed $ 24.0 in Lumber, Architectural Millwork and Windows and $ 8.5 M in manufactured wood components. In this position optimized design and production process, which increased output and reduced labor and material costs. Hired trained and mentored middle management; negotiated union labor contracts. Implemented “Lean and JIT” fabrication procedures; consolidated raw material inventory, implemented batch fabrication process and continuous production flow. Enhanced scheduling system to accurately track production and achieve on-time delivery, established QC metrics, quality assurance and OSHA-approved safety programs.

After 2006, helped company downsize and then worked as a consultant for turn around opportunities. Computer literate, Alpine and MiTek experience, Microsoft Office.

Inquire Relocation: CO, CT, DE, IL, MD, MA, MN, NJ, NY, PA, WI, NC, OH, IN, KY, LA, ME, MI, MO, OR, SC, VA, DC, NH, VT ID: C11638 Senior Designer/Outside Sales Estimator - Truss/I-Joist/EWP 20+ years experience as a Designer/Senior Designer. Primary duties: design, layout, optimization, and takeoff. Secondary duties: customer service and field measurements.

Software used: MiTek, OptiFrame, Alpine, AutoCAD, Soft Plan, Robbins. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes single family custom, multi-family, and light commercial. My volume was varied depending on projects.

Also involved in Outside Sales.

Relocation: IL ID: C10536

Inquire

FAX: 800-524-4982

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

May 2017 #10214 Page #73

JobLine

The Hiring Zone - Available Candidates .com, inc.

Estimator - Truss/EWP/Lumber Plant/Design Manager Construction Inside sales, designing custom homes, light Preparing quantity and cost estimates for commercial, etc. Managed location, hired My objective is to gain a position as residential and commercial remodeling & fired, scheduled deliveries, purchased a production/plant manager with a projects and some new construction lumber, plates etc. Signed payroll & professional, winning organization where using Sage 100 software, meeting with payables. Jobsite visits for measures prior to I can utilize my years of experience to customers to discuss projects and deliver production. All hats manager, hands on with assist in the continued success and growth proposals, meeting with subcontractors to design, estimating and sales. Experience at of the company. I have a strong desire discuss projects and receive bids, preparing plants from $3-12M. to be a part a great team that has a clear drawings to be used for estimating purposes vision and mission for their stockholders, using SoftPlan software. Bachelor's Degree My objective is to obtain a position where I customers, employees, and for the future. I in Building Construction. Tested 73 on the can use my design & communication skills to help and grow with a company. I am welcome the opportunity for advancement JLTDSE. Inquire detail oriented and enjoy problem solving. and promotion, and am always ready to Meeting deadlines and customer satisfaction accept new responsibilities. I have been Relocation: AL, FL, GA are of high importance to me. involved in the rapid growth of a small truss ID: C11827 plant, a new LGS truss and panel production Truss Designer | Truss Design Manager Relocation: WA Inquire ID: C15921 facility, and timber truss production, | Plant/General Manager - Truss, Wall We’re here when you need help! with responsibility for hiring/training/ Plant Manager Panel, Tall Walls visit: www.thejobline.com managing employees at every stage. In As Designer/Outside Sales: All aspects of Senior (ACE) Truss Designer email: mail@thejobline.com addition to production management, I also roof and floor truss design, estimating to Estimating/Outside Sales have extensive experience in purchasing, plant ready work for single to multi family or call Thomas McAnally Design Manager inventory control, quality control and projects I-joist and LVL design for similar for Personalized Service delivery. I am "long-term" oriented, having types of projects. MiTek eFrame, 20/20 and 6 years experience as Plant Manager with STRICTLY CONFIDENTIAL! been with my current employer 18 years. some Sapphire software experience. another 6 years in Design (one of our very I am looking for the chance to grow few ACE designers): Facilitated the truss and advance within the same company, Outside technical sales in Ontario sale, design, & delivery for lumber salesmen Attention Candidates! depending on my performance and abilities. and Michigan, including cold calling, lacking truss experience. Developed own Is your JobLine Candidate Profile troubleshooting site issues and taking care of customer base by selling trusses. Design Presentation Ready? Request a Go to As Plant Manager: Oversee all areas in established clients. I would classify myself layouts of floor and roof truss systems Meeting on-line conference to review your wood truss, LGS truss, LGS wall panel, as more of a "Hunter" type salesperson as for multifamily/commercial projects. current JobLine Candidate Profile. We can Timber truss production and delivery. opposed to a "Farmer".

Proficient use of MiTek Engineering, show you areas to improve, what’s hurting Production management, Facilities eFrame, AutoCAD, TJBeam, and Excel your chances, and how to improve your Management, Maintenance Management, Also design Weyerhaeuser Tall Walls, I've programs. message. The content is still all about you, Master Production Scheduling, Quality been designing them for 6 months now but with this new tool, we can show you how Control, Safety, Hiring/Firing, Discipline, and enjoy it.

6+ years' experience as Plant Manager to make it tell your story better. See why Human Resources, Purchasing (lumber, including staff development, workforce we say “It’s like having a first interview”. plates, hardware, LGS and accessories, As Design Manager: All HR duties involved management and training, meeting EWP, etc.), delivery, and others as needed. with a design staff of up to 12 designers. production goals, asset management, Budget creation and reconciliation maintenance and capital improvements, Inquire both departmental and company wide. budget development and reporting, Relocation: AL, GA, MS, TN, USA - South Implement and enforce design processes and assuring company policies were TheJobLine searches year around for ID: C12001 and procedures. Developed a program to implemented across all departments. candidates that meet our employer ’s Truss Designer - Remote/MiTek help train new designers but also evaluate requirements. With our state of the art Compensation: $90's + bonus Truss/Panel experienced design staff. website, multiple job board subscriptions, truss designer testing, and the JobLine 23 yeas' design experience. Responsible As GM over a small plant: All aspects and Thom's Notes: One of our top 1% ACE's, candidate profile, we have the tools to do for completing design work assigned by operations of a roof truss plant. Developed young, ready to grow with your company. the job right, Guaranteed! the Design Manager, and responsibilities a training program for production staff Relocation: TX Inquire also included: Reading and interpreting to standardize our building procedure. ID: C11427 I have been doing this for over 23 years. blueprints, estimating, ensure designs Developed quality control measures for Because of my reputation for Strict Senior Designer/Design Manager are accurate, optimized, and conforms to production staff including job tracking at Confidentiality, I am the go-to Recruiter Truss/I-Joist/EWP/Total Structure standards, generate EWP placement layouts the production level. Restructured the entire for our industry.

Design for final construction, generate and provide plant layout to help manage workflow, accurate pricing, Aid in providing job-site efficiencies and cost analysis. Purchased 25 years experience. Can't get too specific Put me on your team and I will show you support with the aid of sales department. new automated equipment to improve on this candidate's current duties but past how having theJobLine as your “Recruiter MiTek Sapphire. our labor costs. Database design to track positions include design manager of 25 Down the Hall” can solve your hiring needs. quotes, orders, scheduling for the plant and designers and inside sales staff. Outside Inquire Relocation: GA deliveries as well as report generating. All technical sales, trouble shooting, repairs, ID: C15914 aspects of HR from hiring to promoting and problem solving on site. Software to terminating. Accounts payable and includes MiTek, Truswal, Keymark, TJ Production Manager/Supervisor receivables with QuickBooks software. xPert, TJ Beam, and Microsoft Office.

Truss/Panel 20 years experience. Responsible for all Talk to me today!

Inquire aspects of truss and panel production, Thom's Notes: Does not qualify for NAFTA, 800-289-5627 x1 inventory, performance reviews. 65 will work remotely and has US account for Relocation: USA - South twm@thejobline.com ID: C11928 workers, $9M year. WTCA quality control payment.

Inquire certified.

Relocation: AB, AZ, BC, CA, Canada See What I can do for You! Compensation: $60's+ Thomas McAnally Eastern, Canada - Western/Central, FL, HI, Personal Recruiter MB, NV, NB, NM, NS, ON, SK, TX Relocation: MN Inquire 800-289-5627 x1 ID: C12360 ID: C10789 www.thejobline.com

Production/Plant/General Manager Truss/Panel/LGS/Wood

800-289-JOBS

Time To Hire?

Attention Employers

Don’t miss the perfect employee!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

Calendar of Events

May 2017 #10214 Page #74

When? | What? | Where?

MAY 2017

May 2 May 8 – 10 May 9 – 11 May 10 May 11 May 15 – 16 May 16 – 17 May 18 – 19 May 22 – 16

SBCA of the Capital Area Chapter Golf Tournament & Meeting IndustryWeek Manufacturing & Technology (M&T) Conference & Expo National Hardware Show SBCA of the Carolinas Chapter Meet and Greet Wisconsin Truss Manufacturers Association (WTMA) Chapter Meeting Frame & Truss Manufacturers Association of Australia (FTMA) National Conference Northeast Retail Lumber Assoc. (NRLA) Spring Conference Timber Frame Engineering Council (TFEC) Symposium University of Texas Building Professional Institute (BPI) – 25th Arlington

Fort Belvoir, VA Cleveland, OH Las Vegas, NV Monroe, NC TBA Sanctuary Cove, QLD Rensselaer, NY Madison, WI Arlington, TX

June 4 – 7 June 7 – 8 June 8

National Fire Protection Assoc. (NFPA) Conference & Expo Structural Building Components Assoc. (SBCA) Open Quarterly Meeting West Coast Lumber & Building Material Assoc. (WCLBMA) Associates/Dealers Golf Tournament

Boston, MA Baltimore, MD Fairfield, CA

June 14 – 16 June 21 – 23 June 26 – 28 June 28 – 29

Southern Forest Products Assoc. (SFPA) Forest Products & Machinery Equipment Expo Florida Building Materials Assoc. (FBMA) Summer Education Conference Forest Products Society (FPS) International Convention Pacific Coast Builders Conference (PCBC)

Atlanta, GA Orlando, FL Starkville, MS San Diego, CA

JUNE 2017

JULY 2017 July 26 – 27

Structural Building Components Assoc. (SBCA) Open Quarterly Meeting

August 8 – 11 August 10 August 28 – 29 August 29

Building Officials Assoc. of Texas (BOAT) Annual Conference Wisconsin Truss Manufacturers Association (WTMA) Chapter Meeting Post-Frame Marketing & Economic Summit Mid-Atlantic Wood Solutions Fair

September 10 – 12 September 13 – 15 September 19 – 22

ICC Annual Conference with Building Safety & Design Expo Construction Suppliers Assoc. (CSA) Annual Conference & Expo MiTek Builder Technology Summit

Chicago, IL

AUGUST 2017 Kerrville, TX TBA Indianapolis, IN Washington, D.C.

SEPTEMBER 2017 Columbus, OH Savannah, GA Naples, FL

OCTOBER 2017 October 2 – 4 October 4 October 4 – 6 October 11 – 14 October 17 – 19 October 18 – 20 October 20 – 21 October 25 – 27 October 28 – 30 Oct 30 – Nov 1

2017 ProSales Connections Southern California Wood Solutions Fair Florida Building Materials Assoc. (FBMA) Convention and Trade Show National Council of Structural Engineers Assoc. (NCSEA) Structural Engineering Summit ProDealer Industry Summit METALCON Northeast Retail Lumber Assoc. (NRLA) Annual Meeting Building Component Manufacturers Conference (BCMC) APA – The Engineered Wood Assoc. Annual Meeting University of Texas Building Professional Institute (BPI) – 5th Central Texas

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Dallas, TX Pasadena, CA Orlando, FL Washington, D.C. Phoenix, AZ Las Vegas, NV West Harrison, NY Omaha, NE Huntington Beach, CA Austin, TX

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #75

Adverti$er

Don’t Forget!

You Saw it in the

NOVEMBER 2017

November 2 November 7 – 9 November 8 – 9 November 8 – 9 November 8 – 10 November 9 November 12 – 14 November 14 – 16 November 14 – 16 Nov 29 – Dec 1

Southeast Wood Solutions Fair Western Building Material Assoc. (WBMA) 115th Annual Convention University of Texas Building Professional Institute (BPI) – 5th Brownsville West Coast Lumber & Building Material Assoc. (WCLBMA) Annual Convention and 100th Anniversary Celebration Greenbuild International Conference and Expo Wisconsin Truss Manufacturers Association (WTMA) Chapter Meeting Specialty Tools & Fasteners Distributors Assoc. (STAFDA) Annual Convention & Tradeshow AHF Live: The Affordable Housing Developers’ Summit NAFCD + NBMDA Annual Convention JLC Live Northwest

Charlotte, NC Marysville, WA Brownsville, TX Rancho Mirage, CA Boston, MA TBA Austin, TX Chicago, IL Colorado Springs, CO Portland, OR

December 2017 December 6 – 7

HIVE (Housing Innovation, Vision & Economics)

Los Angeles, CA

Don’t see your event? Increase attendance and participation by listing your industry focused events here!

E-mail details and event web-link to Anna@componentadvertiser.org. We can’t guarantee space for all events, but all industry related events will be added on a space available and interest to our reader priority.

theHAINCOMPANY | 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 | 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #76

Treated Lumber and Trusses (and the One Condition Under Which MPC Wood Trusses Shouldn’t Be Used)

By Kelly Sias, P.E., Simpson Strong-Tie®

What do a chicken house, a water treatment plant and a raised wood floor system all have in common? Very likely, they all involve preservative-treated lumber. They’re also all examples of common environments in which preservative-treated, metal-plate-connected (MPC) wood trusses may be specified.

Although trusses are successfully used in a variety of environments that require treated lumber, the first mention of “treated lumber” usually sends up a red flag in a truss design office. While the corrosion protection of truss plates is no different from the corrosion protection of any other steel fastener or hanger that comes in contact with treated lumber, there are a few more considerations that come into play whenever treated lumber is going to be used in a truss application.

When fire-retardant-treated lumber or preservative-treated lumber is specified, the first (and easiest) step is to determine whether standard G60 truss plates are acceptable for use with the treated lumber, or whether the chemical treatment requires additional protection of the plates. Recent articles on our S.E. Blog have Raised Wood Truss Floor System discussed how fasteners are evaluated for corrosion resistance and how the Corrosion Resistance Classifications in our catalog help facilitate selection of hardware and fasteners for different types of treated wood and environmental conditions. Similar guidelines are also available for determining the proper metal connector plate for different wood treatments. For example, when using the sodium borate-based preservatives and fire retardants, standard G60 galvanized metal connector plates are acceptable.

However, ammoniacal/alkaline/amine copper quaternary preservative types require more protection, such as G185, ASTM A153 galvanized- or stainless-steel truss plates. The complete guidelines – Quick Guide for Alternative Preservative Treatments with Metal Connector Plates – are available from the SBCA website.

When trusses are used in particularly corrosive environments such as coastal environments or salt storage buildings, the ANSI/TPI 1 standard lists coatings that will provide increased corrosion protection for the plates (see below).

6.5 CORROSIVE ENVIRONMENTS 6.5.1 Recognized Coatings.

The following coatings are recognized as providing increased corrosion protection to Metal Connector Plates: (a) Epoxy-Polyamide Primer (SSPC-Paint 22). (b) Coal-Tar Epoxy-Polyamide Black or Dark Red Paint (SSPC-Paint 16). (c) Post-plate-manufacture hot dip galvanizing per ASTM A153.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

Truss Plate Corrosion from Treated Lumber

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #77

Adverti$er

Don’t Forget!

You Saw it in the

The paint coating systems listed in (a) and (b) have been specified in the TPI standard since 1985.

These paint coatings, which are applied to the truss plates after the trusses are manufactured, provide alternatives to the double-dipped galvanized or stainless-steel plates used in coastal high hazard areas. In fact, the ANSI/TPI 1 Commentary states that one study – SSPC Report 87-08, Evaluation of Coatings for Metal Connector Plates – concluded that the paint coating systems over standard galvanized plates would be expected to outperform the double-galvanized metal connector plates in field use.

Once the necessary corrosion protection of the plates has been addressed, the next consideration is the effect of certain lumber treatments on the truss plates’ lateral resistance, or tooth-holding capacity. Fire-retardant treatments generally require strength reductions to be applied to both the lumber and metal connector plate design values. The proprietary treatment manufacturer specifies these design reductions. As soon as the specific treatment is known, the appropriate design reductions can be easily applied by the truss design software and noted on the truss design drawing accordingly.

Coal Tar EpoxyCoated Metal Connector Plate

Besides lumber treatment, there may be other reasons for plate design reductions whenever extra galvanization or special coatings are required. While extra galvanization itself does not necessarily require a reduction in plate values, if the treated lumber’s moisture content (MC) exceeds 19% at the time of truss fabrication, then a 20% reduction to the toothholding values is required. The same 20% reduction applies if the environment for the intended end use of the trusses is expected to result in wood moisture content exceeding 19%.

Special Considerations and Red Flags One corrosive environment that requires special consideration is an enclosed swimming pool. ANSI/TPI 1 requires that trusses be separated from the pool environment by a vapor barrier and be separately ventilated from the pool environment.

The exception to this requirement is if the truss plates are made with a stainless steel that is not susceptible to stress corrosion cracking (SCC), i.e., not Types 304 and 316. Since truss plates made with SCC-resistant stainless steel are not readily available (if at all), a vapor barrier is basically required anytime trusses are used over enclosed swimming pools.

Another important consideration in roof truss applications involving treated lumber is the effect of elevated temperatures.

For example, when FRT lumber is going to be used in an environment where high moisture content will exist, an FRT formulated for exterior use may be specified. However, if the exterior FRT has not been tested with elevated temperatures as specified in TPI 1 Section 6.4.9.1, it should not be used in a roof application.

6.4.9 Chemically Treated Lumber.

6.4.9.1 Fire Retardant Treated (FRT) Lumber.

All FRT lumber used in Trusses shall be re-dried after treatment to 19 percent maximum moisture content at temperatures not to exceed 160ºF (71ºC). FRT lumber design values shall be developed from approved test methods and procedures that consider potential strengthreduction characteristics, including effects of elevated temperature and moisture. Design values shall be approved by the authorities having Jurisdiction.

But the biggest concern when treated lumber is specified for use in metal-plate-connected wood trusses has nothing to do with corrosion at all. When a truss Designer gets a job that calls for a preservative treatment for exterior use or an exterior FRT, the very first question will be why is an exterior treatment required/what is the application?

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #78

Adverti$er

Don’t Forget!

You Saw it in the

Although trusses can be adequately designed for many types of environments, there is one environment that does not mix well with metal-plate-connected wood trusses – exposed exterior applications. The TPI/WTCA Guidelines for Use of Alternative Preservative Treatments with Metal Connector Plates concludes with the following statement:

In addition to the above guidelines regarding corrosion resistance, trusses should not be placed in service where there is repetitive wetting and drying, such as long periods of exterior exposure.

Such exposures may reduce the strength of the metal connector plate joints due to an excessive amount of wood swelling and shrinking. This may then reduce the overall strength of the truss. If specifications require a preservative for exterior use or an exterior FRT, it should be verified that the metal connector plates will be used in a dry exposure.

When trusses are exposed to repeated wetting and drying, the corresponding swelling/shrinkage of the wood causes what is commonly referred to as truss plate “back out.” Since the ability of a truss plate to provide lateral resistance depends on the teeth having adequate embedment into the wood members, any plate “back out” or withdrawal from the lumber due to weathering has an adverse effect on the load capacity of the truss plate.

Example of a truss plate that has “backed out”

For this reason, MPC wood trusses must be protected from the elements, from the time they are built and stored through the extent of their life in service. High moisture content that is consistently high can be accounted for; but if the trusses will be exposed to moisture cycling, then it is time to consider something other than a metal-plate-connected wood truss.

The article “Treated Lumber and Trusses (and the One Condition Under Which MPC Wood Trusses Shouldn’t Be Used) ” appeared first on Simpson Strong-Tie Structural Engineering Blog. To sign-up to receive the Engineering Blog in your inbox, go to seblog.strongtie.com/subscribe.

Copyright © 2017 Simpson Strong-Tie Company Inc. All Rights Reserved

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component OMPONENT Manufacturing ANUFACTURING dverti$er

Safety First!

Safety Meeting Topics From State Fund CA.

Workplace Fires

You Saw it IN in THE the YOU S AW IT

2017 JulyMay 6th, 2012 #10214 #05149 Page #79 PAGE #27

Adverti$er dverti$er Incendios en el sitio de trabajo

Don’t Forget!

El peligro de un incendio está presente en cualquier sitio de trabajo.

Pero si usted está consciente de las posibles causas y condiciones y está preparado, y si piensa antes de actuar, se pueden minimizar los riesgos de incendios en su sitio de trabajo, así como sus efectos dañinos a usted, a sus compañeros de trabajo y a su empresa.

Cumplir con las prácticas de buen orden y aseo es crucial para The potential for fire is present in any workplace. But, if you’re prevenir incendios. Eso significa mantener los equipos eléctricos y aware of the causes and conditions, if you’re prepared, and if you think de calefacción limpios, en buen estado de funcionamiento y libres before you act, the risk of a workplace fire and its damaging effects – on de obstrucciones; limpiar los ductos y los filtros de las campanas de you, your co-workers or your company – can be minimized. extracción de gases; mantener las estufas y los hornos limpios y libres Following good housekeeping practices is crucial to fire prevention. de derrames de grasa, azúcar, salsas, etc.; mantener los papeles, aerosoles That means keep heating and electrical equipment clean, clear, and in y otros materiales inflamables alejados de los elementos de calefacción; good repair; regularly clean ducts and fume hood filters; keep ovens y almacenar los líquidos inflamables alejados de fuentes de calor, y de and ranges clean and free of spilled fats, sugar, sauces, etc.; keep paper las vías de salida y rutas de escape. products, aerosols, and other flammable materials away from heating Para evitar los incendios causados por elements; and store flammable liquids away la electricidad, revise, reemplace o haga que from heat sources, exits or escape routes. To un profesional repare cualquier aparato con avoid electrically-caused fires, check, replace cordones o cables deshilachados o sueltos, así or have professionally fixed any appliance como cualquier cordón o cable que se caliente with frayed or loose cords and wires or cords estando en uso.

Evite colocar los cordones that get hot during use. Avoid running cords o cables debajo de las alfombras o cerca de or wires under rugs and carpets or near a heat fuentes de calor; y manténgalos alejados de las source; and keep them out of doorways where puertas donde pueden estar sujetos a desgaste. they can become worn.

Asegúrese de que los equipos de protección Ensure that fire protection equipment (i.e., contra incendios (por ejemplo, rociadores, sprinklers, smoke/heat detectors, alarms, fire detectores de humo o calor, alarmas, mangueras hoses, fire extinguishers, and fire blankets) are para incendios, extintores de incendio y mantas maintained, available for use, and not impaired para incendio) reciban buen mantenimiento y or concealed. Make sure fire extinguishers estén disponibles para su uso, y no dañados correspond to the potential risk. Know where o inaccesibles.

Asegúrese de que los tipos de they’re located and how to use them. extintores para incendio correspondan a los Besides training in fire prevention riesgos potenciales. Sepa dónde están ubicados and protection, make sure you understand company emergency y cómo usarlos. communication and evacuation procedures. Know the location of fire Además de la capacitación en la prevención y protección contra alarms and the telephone numbers for emergency response personnel. incendios, asegúrese de entender los procedimientos de evacuación y Report a fire, even if it seems minor. Fire fighters would rather arrive and de comunicaciones de emergencia de su empresa. Conozca la ubicación find nothing to do than be called after it’s too late to save individuals or de las alarmas contra incendio y los números de teléfono del personal property. Keep in mind that all workers are responsible for preventing de respuesta a emergencias.

Reporte los incendios, aunque parezcan ser fires, but not everyone is expected to fight major fires. Fire fighting is menores.

Los bomberos prefi eren acudir y encontrar que no tienen nada best handled by trained professionals. que hacer y no ser llamados después que es demasiado tarde para salvar a alguna persona o propiedad. Tenga presente que todos los trabajadores son responsables de prevenir los incendios, pero no todos tienen la Mylon Stark responsabilidad de combatir los incendios mayores. Es mejor dejar el combate contra los incendios a los profesionales capacitados para hacerlo.

605.838.4240 fax 888.519.4130 toll-free 605.220.2342 mobile info@bigpicturesafety.com http://www.bigpicturesafety.com The above and/or recommendations are forare general guidanceguidance only and should not should be reliednot upon legalupon compliance purposes.

They are based solely on the The aboveevaluations evaluations and/or recommendations for general only and befor relied for legal compliance purposes.

They are information provided us and relate only to those specifically discussed.

We do not makecally any warranty, expressed implied, workplace is safe oror based solely on the to information provided to usconditions and relate only to those conditions specifi discussed.

We doornot makethat anyyour warranty, expressed healthful that or that it complies withisallsafe laws, or that standards. implied, your workplace orregulations healthful or it complies with all laws, regulations or standards.

PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 PHONE: 800-289-5627 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

OSHA’s New Electronic Recordkeeping Rule and Anti-Retaliation Provisions

By Gary Auman, NFBA Legal Counsel This article appeared in the April 2017 issue of Frame Building News.

Reprinted with permission.

The new Occupational Safety and Health Administration’s electronic recordkeeping rule to improve tracking of workplace injuries and illness became effective on January 1, 2017. The rule includes provisions to protect those who report injuries or illnesses from retaliation by their employer, and these provisions went into effect on December 1, 2016. Because these provisions are so critical and have been the subject of much controversy, I have delayed my planned article on the remaining five steps for a good safety program until the June 2017 issue of Frame Building News (the first five steps were covered in the January 2017 Safety Update).

Since the rule went into effect, much speculation on whether the new administration will enforce these new rules or take steps to eliminate or circumvent them has ensued. Because the provisions were part of the electronic recordkeeping standard, which was adopted under the formal Administrative Procedures Act of 1946, they cannot be eliminated with the stroke of a pen.

But the new Secretary of Labor and the new OSHA administrator can set parameters for their enforcement.

Should the new administration offer even guidelines for the enforcement of part or all of the new anti-retaliation provisions, they will not be put into effect for some time. In the meantime, all employers are bound by the new rules, and OSHA has issued several interpretive documents regarding them. OSHA still has to prove that a company rule for reporting workplace injuries or illnesses that appears to be retaliatory to employees was established to discourage employees from reporting workplace injuries.

Procedures for Reporting Work-Related Injuries and Illnesses The first requirement under the new rules is that employers must establish and train their employees on procedures for reporting workplace injuries and illnesses. The procedures must be easy to understand and must be reasonable. For example, OSHA will consider a prompt-reporting rule—which mandates PHONE: 800-289-5627

Adverti$er

Don’t Forget!

May 2017 #10214 Page #80

discipline of an employee for late reporting, especially when the employee could not reasonably have reported the injury or illness earlier—to be a violation of section 1904.35(b)(1)(iv). This will be especially true if there is no reasonable business purpose for the prompt reporting requirement. OSHA will consider a reporting procedure reasonable if it is not unduly burdensome and would not deter a reasonable employee from reporting.

In a memorandum for regional administrators dated October 19, 2016, OSHA (2016) stated that “while employers have an interest in maintaining accurate records and ensuring that employees are reporting work-related injuries and illnesses in a reasonably prompt manner, these interests must be balanced with the importance of accurate injury reporting, and therefore employers’ reporting policies must be designed so as not to discourage employees from reporting.” In other words, if a company’s injury and illness reporting policies are complicated or time restrictive, while being connected with disciplinary measures that discourage an employee from reporting an injury or illness for fear of not correctly following all the steps in a timely manner, the company will likely be cited for violating this standard.

Safety Discipline Another concern under the new rules is the prohibition against disciplining an employee for violation of a safety rule when the violation results in an injury. In the same informational memo referred to above, OSHA has reminded employers as well as its own regional directors that the new standard does not prohibit employers from disciplining employees who violate safety rules; it does prohibit employers from disciplining employees simply because they reported a work-related injury or illness. If OSHA cites an employer for disciplining an employee for violating a safety rule, when that violation resulted in a report of an injury, OSHA has to prove that the discipline was for reporting the injury, not for violating the safety rule. In other words, OSHA has to prove that the alleged rule violation was merely a pretext for being able to discipline the employee for reporting the injury.

OSHA points out that circumstantial evidence may be sufficient to prove retaliation.

What does an employer need to do to avoid such a result? As I have stated many times, every employer needs to have a safety enforcement program. From a safety perspective, an employer will not be judged “a reasonably responsible employer” if the company provides safety rules but does not ensure that its employees comply with them.

In order to have an effective safety communication and enforcement program, you must first determine the hazards to which your employees will be exposed. Second, you must develop rules for protecting your employees from those hazards. This might include guards, the use of personal protective equipment, or the adoption of administrative controls. Third, you must communicate

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

You Saw it in the

those rules to all of your employees and remind them that they will receive discipline up to and including termination from employment for violating those rules. Fourth, you must be sure they understand the rules and their obligations to comply with them. Fifth, you must establish an audit program to monitor your employees’ compliance. Sixth, you must issue discipline and provide retraining relevant to each safety violation, no matter the level of seriousness. Finally, the discipline issued must be consistent and must be applied objectively.

If you follow these steps and enforce your safety rules consistently and objectively, you should not have a problem demonstrating that the discipline issued for the safety rule violation that led to the work-related injury or illness was a legitimate enforcement of your safety rules. One key here is to be able to show that you issue discipline as necessary to enforce your safety program, whether or not an injury resulted from the safety violation.

Mandatory Post-Accident Drug Testing The announced prohibition of mandatory post-accident drug testing is probably causing the most confusion among employers.

Many of the trade association members with whom I work require post-accident drug testing as part of their drug-free workplace program. They are now concerned that many of these programs, established for a legitimate purpose, will have to be eliminated.

According to OSHA, mandatory drug-testing programs that are required by local, state or federal laws will be permitted because they are legally mandated. But what about other programs that also have a legitimate purpose but do not have the protection of a law?

Some confusion has arisen because of the apparently mixed interpretations of this prohibition given by staff in different OSHA area offices. It is not yet known how all the OSHA state offices will handle mandatory post-accident drug testing. The mandatory post-accident drug testing prohibition applies only to drug testing connected to injury reporting. So an employer may still require post-accident drug testing following accidents that involve property damage as well as for other identified reasons not related to injury reporting.

The same memorandum referred to above states that “section 1904.35(b)(1)(iv) only prohibits drug testing employees for reporting work-related injuries or illnesses without an objectively PHONE: 800-289-5627

Adverti$er

Don’t Forget!

May 2017 #10214 Page #81

reasonable basis for doing so. As in all cases under section 1904.35(b)(1)(iv), OSHA will need to establish the three elements of retaliation to prove a violation: a protected report of an injury or illness, adverse action, and causation. In the next paragraph of the memo OSHA advises that in evaluating whether an employer had a reasonable basis for drug testing following the report of a work-related injury or illness, OSHA will consider whether the employer had a reasonable basis for believing that the drug used by the employee who reported the injury could have contributed to the injury or illness.

Unfortunately, as OSHA has attempted to further clarify its rationale, it seems to be creating more confusion. OSHA provided an example of several employees who are injured in a crane accident in which the crane operator is not injured. In this instance, OSHA said, it would be reasonable to require all employees whose conduct could have contributed to the incident or injuries to be tested, whether or not they reported an injury. However, OSHA points out that it would not be reasonable to require a drug test only for those employees who reported an injury and not for other uninjured employees whose conduct could also have contributed to the incident. OSHA uses this example to underscore the main principle: that drug testing may not be used as a form of discipline against employees who report an injury or illness.

OSHA followed this illustration with the statement that “drug testing an employee whose injury could not possibly have been caused by drug use would likely violate section 1904.35(b)(1) (iv).” Of course, this last statement would require an employer to separate those injuries reported because of an accidental occurrence from those occasioned by happenstance. I suggest that a blanket post-accident drug-testing policy following any accidental occurrence—whether with or without an injury—is the best way to reduce the chance of a problem.

The example given above is fairly easy to understand.

Unfortunately, most on-the-job injuries involve only one employee, whose own actions or inactions cause the injury or illness to that same employee. So when viewed in its totality, it appears that OSHA’s October 19, 2016, memorandum reaffirms the prohibition against mandatory post-accident drug testing.

Some OSHA area offices appear to have placed their own spin on this language. Some are stating that if state law provides for a drug-free workplace program, with a promise of lower workers’

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

compensation premiums for those who participate, the area director will consider that program to provide a non-retaliatory reason for mandating post-accident drug tests, even if the state law requires the employer’s drug-free workplace program to provide for testing only if a reasonable suspicion exists that drug use was involved.

Employers thus have several options. The first option, and the one least likely to result in a citation, is to stop requiring postaccident drug testing, unless such testing is specifically required by a state or federal law. Of course, if you take this option, you may institute a testing program in cases where a reasonable suspicion of a violation exists.

A second option is to ensure that any mandatory drug-testing program extends to all employees involved in any mishap while they are working, whether or not an injury occurs. This would be similar to the OSHA example with the crane. Any employee involved in any mishap would have to submit to a drug test or alcohol test or both. An employer who takes this approach should not make any exceptions, especially for employees involved in a mishap that did not cause an injury. This option, if properly crafted and implemented, should permit you to continue doing mandatory post-accident drug testing with little or no risk of drawing a citation, except in the rare situation where the employee’s injury occurs through mere happenstance, such as a bee sting.

May 2017 #10214 Page #82

News & Announcements

Simpson Strong-Tie Recognized as 2016 Vendor of the Year by U.S. LBM Pleasanton, Calif. – Simpson Strong-Tie, the industry leader in engineered structural and building materials, received the 2016 Vendor of the Year Award from U.S. LBM, one of the largest specialty building materials distributors in the United States, during an annual meeting for U.S. LBM business leaders and contacts in Amelia Island, Florida.

“We are very honored to be recognized as U.S. LBM’s Vendor of the Year,” said Roger Dankel, President of North American Sales for Simpson Strong-Tie. “Credit for this award goes to our sales, shipping, and manufacturing teams who work tirelessly to provide exceptional customer service.”

A third option is to contact your OSHA area director or the head of your state OSHA to see what his or her approach to this prohibition will be.

A final option is to conduct business as usual, hoping that no employee or employee representative complains about your mandatory post-accident drug-testing program. Some companies will undoubtedly choose this approach, at least until the new administration establishes its own priorities. Of course, inherent risks are associated with this option, and for this reason I do not recommend it.

This new rule is a broad one that affects all employers, whether or not they ever considered their post-accident testing protocol to be anything more than part of their accident investigation and Pictured (left to right): Simpson Strong-Tie President of North prevention process—a tool for helping determine the cause of an American Sales Roger Dankel; U.S. LBM President and CEO LT on-the-job accident. That tool has been significantly affected, and Gibson; U.S. LBM COO Jeff Umonsella; and Simpson Strong-Tie all employers must look at their current post-accident procedures to Branch Sales Manager Kevin Dill. ensure that they do not fall into the category of retaliatory conduct designed to inhibit or discourage employees from reporting onthe-job injuries or illnesses.

Gary Auman of Dunlevey Mahan and Furry is legal counsel for the National Frame Building Association.

Reference Occupational Safety and Health Administration. (2016). Memorandum for Regional Administrators from Dorothy Dougherty: Interpretation of 1904.35(b)(1)(i) and (iv). Retrieved from www.osha.gov/ recordkeeping/finalrule/interp_recordkeeping_101816.html PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #83

News & Announcements

Building Code Update: 2018 IBC to Reference ASCE 7-16

By Randy Shackelford, PE, SE Simpson Strong-Tie®

In early December, ICC posted the preliminary results of the Group B Online Governmental Consensus Vote, which included structural changes to the IBC, IEBC and IRC. ICC reports that there were more than 162,000 votes cast by eligible Voting Members during the three-week online voting period.

One subject of interest to building Designers, builders and some building-material suppliers was the disposition of a group of code changes that adopted ASCE 7-16 as the reference standard on loads for the IBC and IRC, and changed other parts of the IBC and IRC to reflect that.

The most controversial part of adopting the new ASCE 7-16 standard was its increase in roof component and cladding loads.

The higher pressure coefficients in some cases raised the concern that the cost of roofing, roofing materials and roof repairs would be increased. Other items that raised some opposition were the new chapter on tsunami loads and the increase in deck and balcony live loads from 40 psf to 60 psf.

Despite these concerns, ICC members voted to approve the code change that adopted ASCE 7-16 as the reference for loads in the 2018 IBC, IRC and IEBC. Along with that specific change, several other related changes were approved to correlate the IBC with adoption of ASCE 7-16. These included changes to Section 1604, General Design Requirements; adding in a new Section 1615 on Tsunami Design Requirements; modifications to Section 1613 so that seismic design requirements match ASCE 7-16; and deletion of Section 1609.6, Alternate All-Heights Method for wind design. On this last item, the argument was that since ASCE 7 now includes a simplified wind load design method, a competing method is not needed in the IBC. Interestingly, a change to remove Strength Design and Allowable Stress Design load combinations from the IBC, which was approved by the IBC Structural Committee, was overturned and denied by the ICC Member voters. So those will remain in the IBC. For the IRC, even though ASCE 7-16 will be shown as the referenced load standard, most changes to the actual code language relating to the new standard were denied. Items that were specifically denied included adoption of ASCE 7-16 wind speed maps, adoption of ASCE 7-16 roof pressure loading, and adoption of the new higher deck and balcony live loads. So the result is that the IBC and IRC will again be inconsistent with each other regarding wind design. On the other hand, the new USGS/NEHRP Seismic Design Maps were approved.

Future Code Corner articles will address other changes approved for the 2018 IBC and IRC. The article “Building Code Update: 2018 IBC to Reference ASCE 7-16” appeared first on Simpson Strong-Tie Structural Engineering Blog. To sign-up to receive the Engineering Blog in your inbox go to seblog.strongtie.com/subscribe Copyright © 2017 Simpson Strong-Tie Company Inc. All Rights Reserved

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

News & Announcements

May 2017 #10214 Page #84

New, Stainless-Steel Titen HD® Screw Anchor from Simpson Strong-Tie Combines Cutting Ability with Improved Corrosion Resistance

Pleasanton, Calif. – Simpson Strong-Tie, the industry leader in engineered structural connectors, fasteners, anchors and building solutions, has launched the next era of stainless-steel screw anchors for concrete and masonry. The new stainless-steel Titen HD® heavy-duty screw anchor (THDSS) delivers a new standard of performance in exterior applications, even in severely corrosive environments. The introduction of THDSS offers a state-of-the-art screw anchor solution that combines the corrosion resistance of Type 316 stainless steel with the undercutting ability of heat-treated carbon-steel cutting threads.

The THDSS screw anchor’s cutting ability comes from a proprietary bi-metal design that uses a carbon-steel helical-coil thread brazed into the shank of the anchor. These serrated carbon-steel threads undercut the concrete allowing subsequent threads to securely interlock with the concrete.

Other stainless-steel bi-metal anchors are made by welding a full carbon segment onto the end of the anchor to facilitate cutting. Over time, however, carbon steel is vulnerable to corrosion, which can cause the steel to expand and crack the surrounding concrete. In the stainless-steel Titen HD, the carbon steel is confined to the helical-coil thread so as to limit concrete damage when it corrodes. For comparison, a 1/2” x 5” THDSS screw anchor contains less than 1% carbon steel while other stainless-steel screw anchors of the same size can contain up to 18% carbon steel.

“The new stainless-steel Titen HD anchor is a game-changer for contractors working in harsh environments,” said Corey Clark, product manager, Simpson Strong-Tie. “Prior to this product being available, contractors were largely limited to using wedge anchors or adhesives.

Now we have a solution available that is reliable and easy to install.”

Key features and benefits of the THDSS screw anchor: •

Ideal for exterior applications and corrosive environments

•

Type 316 stainless steel

•

Minimized carbon steel for less corrosion expansion

•

Installs with an impact wrench or a hand tool

For more information about the THDSS screw anchor, visit strongtie.com/titenhdss.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #85

News & Announcements

2465 NE Hopkins Ct Pullman WA 99163 USA tel: 509 332 7526 www.metriguard.com fax: 509 332 0485 sales@metriguard.com NEWS

PULLMAN, WA USA – We are pleased and excited to announce that Metriguard is now part of Raute Oyj, headquartered in Nastola Finland. Metriguard will continue to operate in Pullman, WA USA under the legal name Metriguard Technologies, Inc. We want to continue to be known as Metriguard. This joining force will strengthen both Metriguard and Raute’s product lines, amalgamating the best practices of both businesses in the future.

Metriguard will continue manufacturing production-line lumber and veneer grading equipment as well as quality control and laboratory testing equipment for the engineered wood products industry. Rest assured that Metriguard will provide ongoing support, repairs, parts and service for installed Metriguard equipment. The Metriguard team will stay intact, with the exception of Jim and Jean Logan, who will remain as consultants for a period of time to oversee the transition before stepping away from the business completely. The new President of Metriguard will be Jani Roivainen, who has successfully managed the Mecano Business Unit for Raute Corporation since their acquisition.

Metriguard’s staff will continue to deliver the same excellent products and service in the future.

The telephone and fax numbers have not changed, and the email addresses for the individuals on the staff also will not be changing. Postal mail should be directed to Metriguard Technologies Inc. at the address above.

A more detailed announcement is located at the following link: http://www.metriguard.com/metriguard-raute.php.

Please also visit Raute’s website, www.raute.com, for more information about Raute, and their complementary products and services.

Jim Logan (right) President and founder of Metriguard Inc. with Tapani Kiiski (left) President and CEO of Raute Corporation

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #86

News & Announcements

For Immediate Release April 2017

Panels Plus Adds New Sheathing Station Video to YouTube Channel Albert Lea, MN — Panels Plus is pleased to share its latest video on its YouTube channel, highlighting the Panels Plus Sheathing Station with Screw Bridge. The video demonstrates how the Sheathing Station with Screw Bridge operates with efficiency and accuracy, every time.

The Panels Plus Sheathing Station with Screw Bridge offers the ability to fasten sheathing of any kind to wall and floor sections with screws. Featuring a manual router bridge with auto return to home station, it is easy to operate while providing consistent screw spacing. Custom lengths are available to fit every plant.

Panels Plus offers a full line of wall panel equipment for faster, more efficient production. We build it with a genuine dedication to ingenuity, innovation, and productivity. And we’re continuously improving our products. Whether you are just starting out in wall panels or are a seasoned producer, we want you to be the best manufacturer in your market.

With Panels Plus, the benefits for your operation are significant: •

Simplicity and ease-of-use reduces injuries and costly accidents.

•

Well-designed equipment speeds up production.

•

Rugged, quality, durable construction.

•

Installs quickly – starts making money faster.

•

May lower your labor cost.

With superior quality and engineering expertise, we’re confident that you’ll be glad you put your trust in Panels Plus equipment.

We offer prompt installation and training, and we stand behind our equipment with prompt, efficient customer support. Contact 866-PAN-PLUS or visit www.panplus.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

Adverti$er

Don’t Forget!

You Saw it in the

May 2017 #10214 Page #87

News & Announcements

Alpine and Triad Announce Partnership to Simplify Equipment Purchases for Customers Glenview, IL— April, 13 2017 —Alpine and Triad announce a partnership allowing component and panel manufacturers to purchase Triad equipment through their trusted Alpine sales representatives.

On March 1, 2017 Alpine added the Triad wood wall panel equipment line to its product portfolio. Alpine is known for providing the industry’s most innovative, productivity-enhancing equipment. Partnering with Triad, the industry leader in panelization, will allow Alpine to offer its customers the same productivity increases on wall panel lines. This further strengthens the competitive positions of both Alpine and Triad, while adding value to customers.

Componentization has become the strongest solution to the construction industry’s labor shortage issues. Maximizing production efficiency is no longer an option, but a requirement for the industry. Whether it’s for trusses or wall panels, new equipment will increase productivity and boost the competitiveness of any operation. The experts at Alpine and Triad are available to analyze production and recommend pieces of equipment that will provide the greatest gains.

“We are excited to be able to offer Triad equipment including the popular Generation 3 Framing Table and the Trident Bridge.

Representing the Triad line will allow Alpine to help our customers throughout their facilities, increasing quality, efficiency and productivity,” said Elizabeth Lisiecki, Business Manager, Equipment at Alpine.

Lowell Tuma, National Sales Manager for Triad states, “We look forward to working with Alpine towards our goal of continued innovation as the authority in the panelization industry.”

New production equipment has been demonstrated to reduce costs, and reduce the need for skilled labor. Both actions are needed to remain competitive in the component industry. Adding Triad, with their 58 years of experience as the leader in wall panel equipment, to the Alpine equipment line reinforces Alpine’s commitment to deliver the latest products to increase plant efficiency and productivity.

For more information, press only: Lowell Tuma 800-568-7423 Ext 126 lowellt@merrickmachine.com For more information on April, 13 2017:

www.triadmachines.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #88

Adverti$er

Don’t Forget!

You Saw it in the

News & Announcements

MiTek® Announces its 2017 MiTek Builder Technology Summit™ The Summit Will Showcase MiTek Home Builder Software Solutions, as well as Integrated Partner Solutions.

Home Builder Clients Will Co-Present With Their Solution Providers.

CHESTERFIELD, MO – April 6, 2017 — MiTek USA today announced the launch of the MiTek Builder Technology Summit. The 2017 MiTek Builder Technology Summit is an inaugural event that will showcase the very latest technology for home building design, estimating and workflow. The Summit will feature technology exhibits and demonstrations, as well as a wide range of educational/training sessions.

The technology Summit will feature MiTek’s builder-focused companies and software platforms including BuilderMT, Cubit, DIY Technologies, Sales Simplicity, SAPPHIRE Supply, SAPPHIRE® Build (KOVA), and Wrightsoft.

In addition, integration partner-companies that have linked to MiTek solutions will also be featured, including Avid Ratings, CG Visions, Build Intelligence (DOMO), Event 1 Software (Liberty Reports), LandDev, Punchlist Manager / Inspection Manager, Specitup, and Western Computer.

The three-day MiTek Builder Technology Summit is focused on information sharing. The Summit will kick off by hearing from current customers, presenting alongside their technology providers, to highlight their experiences and the impact these technologies have had on their businesses.

MiTek is urging attendance from senior home building managers, with a special focus on CEOs, COOs, CIOs, CTOs, as well as personnel from the sales, purchasing, scheduling, and quality-assurance departments.

The MiTek Builder Technology Summit will be held at the Naples Beach and Golf Hotel, in Naples Florida, September 19-22, 2017.

“This Summit is designed as a technology exposition both in addition to a training/educational event,” said MiTek’s Rob Hooker. “We intend to draw attendees from elite home building companies that want to see the latest technology designed to cut cycle-times, reduce the need for skilled labor, and drive higher profit margins. We’ll see you in Naples!”

Learn more: www.MiTekBuilderTechnologySummit.com About MiTek MiTek USA is a division of MiTek Industries, a diversified global supplier of software, engineered products, services, and equipment to the residential, commercial, and industrial, construction sectors. MiTek Industries’ passion for its associates’ well-being and its customers’ success is the company’s hallmark. A Berkshire Hathaway company (NYSE: BRK-A, NYSE: BRK-B) since 2001, MiTek has operations in more than 40 countries on six continents. Learn more: www.MiTek-us.com and www.MII.com. ### Media Contact: John D. Wagner jdwagner@wagnerpr.com www.WhatAboutWagner.com 919-796-9984 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A

Th e

Component Manufacturing dverti$er

May 2017 #10214 Page #89

Adverti$er

Don’t Forget!

You Saw it in the

The Last Word...on Travel Planning Joe Kannapell - Senior VP MiTek Industries, Inc. www.mii.com

M

y best advice is to always deal directly with hotels and airlines, and avoid buying from “middlemen” like Priceline. They don’t save you money anymore according to the New York Times’ Frugal Traveler (see April 18 article by Lucas Peterson). Perhaps they did before these billion dollar behemoths configured great websites. Today, with just a few mouse clicks, you can find the best flight or hotel accommodation. You may use the go-between sites to compare alternate arrangements, but always buy directly from the end provider’s website. The best airline comparison site doesn’t even sell tickets as follows…

Google/flights shows lowest prices instantly, to/from multiple airports simultaneously, with excellent tools to narrow your search. Upon selecting a flight, you “click through” to buy the ticket directly from the airline’s website. As a result, all of your flight information is clearly displayed on the airline’s app on your smart phone and on your calendar (if you so choose). However, don’t forget to check the Southwest Airlines site before you buy tickets, because their fares are generally excluded from aggregator sites.

Marriott and Hilton websites include most of the decent hotels in America. You can get closest to your destination with the useful maps on their websites, and choose from a wide range of rates and discounts. If you’re like me and want to bed down quickly, use your hotel’s advance check-in when prompted. If you’re lucky, your hotel offers online room selection and even room access via your smart phone Checking in ahead of time protects you from getting bumped at an overbooked hotel, which has the highest likelihood of happening when you arrive late in the evening.

Even occasional travelers should register on at least two hotel, two rental car, and two airline websites. This can be accomplished in less than one hour and prepares you for the unexpected. All offer loyalty benefits that can accumulate over a lifetime of travel and seldom expire.

One final caveat – you are on your own when away from home. Not one of these providers can/will take care of you better than you can take care of yourself. Always pay attention to the location of the inbound flight coming to get you, even if your outbound flight is shown to be “on time.” American Airlines displays this information on their app, and indicates whether this inbound aircraft is on schedule. I don’t believe that my flight is really “on time” until the American app reports that this inbound flight has taken off. I remain especially vigilant, and proactively seek alternate flights when the plane coming to get me originates in an airport undergoing inclement weather. And in the event my flight is canceled, I immediately phone my airline. And while I’m on hold, I search alternate airports and times on Google/flights.

Remember that you’re in driver’s seat and the greatest travel tools ever offered are right at your fingertips.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

THE FUTURE IS PRE-FABRICATED

SHARPEN YOUR EDGE MATCHPOINT™ DIRECTDRIVE SYSTEM ENABLES GAME-CHANGING AUTOMATION

MITEK’S SOFT WARE SUITE BOOSTS DESIGN AND PRODUCTION EFFICIENCY

MITEK UNIVERSIT Y™ AND THE SAPPHIRE ® VIDEO HELP LIBRARY THE INDUSTRY’S BEST ONLINE TRAINING

SOFT WARE, ENGINEERING AND MANUFACTURING SUPPORT TEAMS STRONGER AND MORE RESPONSIVE THAN EVER

COMPLETE LINE OF CONNECTION SOLUTIONS STRUCTURAL CONNECTORS, WIND AND SEISMIC SYSTEMS, FASTENERS AND ANCHORING SOLUTIONS

YO U D E S E R V E T H E B E S T R E S O U R C E S AVA I L A B L E

©2017 MITEK, ALL RIGHTS RESERVED

America wants to build more houses. Now is your time to shine. This year we’ve reinforced our commitment to suppor ting your success at ever y phase, with new tools and stronger suppor t than ever. We work alongside you to: >

Maximize Productivit y and Increase Your Value

>

Minimize Wasted Materials, Time and Labor

>

Increase Your Bottom Line

Achieve a new standard of per formance with solutions designed for you. Learn more at MiTek-US.com/CM or call us at 800-325-8075.