Issuu

A #

318

The

January 2026 #18318

Component Manufacturing dverti$ dverti $ er

Serving the Structural Building Components Industry

The

Component Manufacturing dverti$ dverti $ er

Serving the Structural Building Components Industry

Inside

Articles 6 Anna Stamm – Advertiser Forum: Twenty Words Revisited

95 Carl Villella – Acceptance Leasing: A 2025 Recap and a Look at 2026

10 Joe Kannapell: Home Building Technology, Part XIII: Truss Equipment Proliferates – Component Saws

102 Paul B. Schmidt – TechWood: New Fire-Rated One- and Two-Hour Wall Assemblies

19 Glenn Traylor: Is It Possible to Learn From Mistakes? 29 Wendy Boyd – Spida Machinery: Using Smart Machinery to Help Your Team Do Its Best Work

110 Thomas McAnally – TheJobLine: When Meetings Get in the Way of Work 118 Geordie Secord – Design Connections: AI in Truss Design: Opportunity or Long-Term Risk?

39 MiTek Staff: Building for Success!!

126 Frank Woeste – All Things Wood: 2026 Wood Construction Course: Wood Design, Loads, Disaster Mitigation, and Ethics

48 Ed Lim – LimTek Solutions: When the Going Gets Tough, Innovate!

136 MiTek Staff: Calculating Dead Loads on Studded Trusses

50 Charlie Vaccaro: A Fable For Our Time

144 Simpson Strong-Tie Staff: Do What You Can Day 2025: Employees Supporting Communities Worldwide

62 Todd Drummond Consulting, LLC: The OODA Loop and the New Reality of the Truss and Wall Panel Industry 75 Paragon Team: Finding the Common Chord

158 Sean Shields – SBCA: Meetings that Move the Industry Forward: Why OQMs Belong on Your Calendar

84 Kenneth Sewell – Cadynce: Why the Future of the Truss Industry Belongs to Teams With Visibility

188 Joe Kannapell – The Last Word: (When) Will AI Overtake the Truss Industry?

INTRODUCING THE PICKFEEDER... FLEXIBLE, AUTOMATED PICKING & DELIVERY SYSTEM

NEW INNOVATION

FOR TRADE STORES & FABRICATION PLANTS

Slowly gathering and organizing loose lumber manually is now a thing of the past. Stand-alone automated picking is here! With a compact footprint and newly developed software, Vekta’s fully customizable PickFeeder system is built to fit your needs. It intelligently scans, selects, and delivers lumber to the stack at lightning speed – eliminating downtime, fatigue, and costly errors. You can even combine multiple PackFeeders into your PickFeeder system to increase volume or range of product.

info@vektausa.com I vektausa.com

The

Component Manufacturing dverti$ dverti $ er

Advertisers

Sections

Serving the Structural Building Components Industry

Inside

New & Used Equipment Saws ................................................................................................7 Truss Equipment ............................................................................77 Panel Equipment ..........................................................................105 Trucks & Trailers .........................................................................133 Misc. Equipment ..........................................................................143 Door | Stair | Window Equipment ................................................156 Calendar of Events ................................................................................160 Safety First ...........................................................................................162 TheJobLine - Jobs & Candidates ............................................................163 Industry News .........................................................................................168 Directory .................................................................................................183 Hiring-Zone - Jobs & Subcontractors ..................................................186 4Ward Solutions Group .................................................................. 7,90,161 Acceptance Leasing & Financing ................................................... 25,83,95 Acer, Inc ............................................................................................ 38,130 All Points Technical ...................................................................... 15,43,101 Alpine ................................................................................................... 16,56 BuyMetrics ........................................................................................... 35,83 Cadynce ................................................................................... 42,84,122 Clark Industries, Inc. .......................................................................... 24,88 CT Darnell Construction ................................................................ 17,125 Eagle Metal Products ......................................................................... 14,134 Eide Machinery Sales, Inc. .................................................................. 21,78 Element Equipment .............................................................................. 36,80 Fitzgerald Group ................................................................................ 69,117 Hiring-Zone ............................................................ 17,91,101,105,123,135 HOLTEC USA .................................................................................. 13,190 Hundegger USA .................................................................................. 26,94 LimTek Solutions ............................................................................ 34,48,60 MiTek .................................................................................... 8,39,136,187 Panels Plus ....................................................................................... 112,117 Paragon .......................................................................................... 31,74,75 Precision Equipment Truss Trailers ............................ 27,45,59,69,135,139 ROGworx Automation ........................................................................ 22,23 Simpson Strong-Tie ........................................................ 12,54,144,172,173 Spida USA ........................................................................... 28,29,58,82,120 TechWood ................................................................................... 44,102,150 The Hain Company ............................................................. 15,27,43,57,151 The JobLine ........................ 17,33,89,91,96,99,105,110,111,118,153,157,163 Timber Products Inspection .............................................................. 18,108 Todd Drummond Consulting, LLC ............................................... 32,62,140 Triad | RUVO | Merrick Machine ............................................ 124,142,156 Vekta Automation ................................................................................. 4,70 Wasserman & Associates ............. 9,27,33,55,77,81,86,89,91,93,97,99,101, 106,107,115,117,131,132,133,143,153 West Fraser .................................................................................. 2,98,174 Wolf X Machina ...................................................................................... 157 Wood Tech Systems .................... 25,33,37,45,47,55,57,59,61,67,68,69,71, 72,73,76,77,79,87,89,91,97,100,104,109, 114,121,123,125,131,135,152,154,157

Published Monthly Publisher Thomas McAnally twm@componentadvertiser.org

Editor Anna L. Stamm 800-289-5627 x 3 anna@componentadvertiser.org

Distributed FREE Via e-mail subscription Download PDF or Read on line at www.componentadvertiser.com News of Interest and Advertising inquiries can be submitted to: anna@componentadvertiser.org An Open Forum for many sources. Deadline 20th of each month. Articles, Trade Names, and Logos are the property of their respective owner or creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. Permission to use content is the responsibility of the contributor including permissions to use any likeness of persons. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional.

Component Manufacturing Advertiser The

Advertiser

7586 Becks Grove Road Freetown, Indiana 47235

no reproduction in whole or in part without permission from the component manufacturing advertiser Archive Copies Available On Line www.componentadvertiser.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

Advertiser Forum

January 2026 #18318 Page #6

Twenty Words Revisited Anna L. Stamm

ix years ago, I wrote “20 Words for 2020.” I remember it very well, carefully choosing those 20 words that I wished for everyone in the coming year. In many ways, that seems like a very long time ago. That was before the pandemic stole millions of lives from the world. That was before my sister’s diagnosis and our difficult battle with her terminal cancer. So, as 2025 came to a close, I wondered if those 20 words had stood the test of time.

Director of Communications and Marketing Component Manufacturing Advertiser.

Beginning the list, my first 4 words are virtuous: Honesty, Integrity, Honor, Courtesy. Yes, those still deserve to be at the top of my list, and I continue to hope our human interactions can be guided by them. The 4 words in the second set are aspirational: Inspiration, Artistry, Creativity, Encouragement. These words are a wish for more beauty in the world. The next 4 words continue the uplifting theme: Appreciation, Respect, Recognition, Acceptance. These would be positive steps for our professional and personal relationships. The 4 words that follow are a wish to bring back the delight we knew best when we were young: Excitement, Amusement, Happiness, Joy. These could bring more laughter to our lives. Finally, the concluding 4 words are also virtues: Compassion, Generosity, Kindness, Grace. Yes, I wish these for everyone still. My sister asked why I concluded with grace, which is the most difficult to define. I answered that it was very important even though its meaning varies, because it is so closely linked to a good heart. Sadly, it was throughout my sister’s battle that I was able to witness grace many times, alongside true caring and compassion, sympathy and empathy. In the end, I continued to wish for it the most. So, what words are missing? The 6 words I live by and have always taken as given. They are: Strength to face any challenge life throws us, Determination to keep fighting regardless of the odds, Love because there is no better motivation, Heart because actions without meaning are fruitless, and Faith because no matter what our beliefs are, it is our faith in what we hold dear that motivates us to live a Good life.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

GET A CLEAR VIEW OF YOUR EQUIPMENT, LAYOUT, AND OPERATIONAL POTENTIAL THEN BUILD A SMARTER PATH FORWARD WITH 4WARD’S 3D MODELING & AUTOMATION ASSESSMENT.

YOUR PLANT

DIGITIZED

With 4Ward’s 3D Modeling and Automation Assessment, you’ll see from your entire plant like never before digitized, mapped, and ready for smarter decisions. We pinpoint bottlenecks, optimize layouts, and build a custom automation roadmap tailored to your operations. From Powering the Future of Offsite Construction the 4Ward Way robotics to IoT, we don’t just consult, we help you execute.

MERRY CHRISTMAS & HAPPY NEW YEAR What You Get:

• A 3D model of your entire facility, for workflow simulation At mapped 4Ward Solutions Group, we don’t just offer services, we deliver •end-to-end Digital asset cataloging equipsolutions thatfor fuel industrialized construction. Our ment tracking and layout planning from concept to operation, helping integrated brands guide companies •you A scale custom Automation smarter, buildRoadmap faster, and lead with precision. This holiday tailored to your operations season, we’re grateful for our partners, clients, and the opportunity to •keep Integration including buildingstrategies what matters. Weequipment, call it The layout, 4Wardand Way! process BOOK YOUR 3D MODELING & A smarter, mapping more connected approach to offsite success. AUTOMATION ASSESSMENT TODAY • Cost-benefit analysis to show info@4wardconsult.com

ONE TEAM ONE VISION where tech delivers ROI ONE PARTNER IN 2026 FOR THE FUTURE OF BUILDING

Explore what’s next at 4WardSolutionsGroup.com

PROTECT PROFITS. STAY GREENLIT. Ready to take your operation to the next level? Explore the latest solutions designed to maximize operational productivity and help you stay ahead in a competitive market. Count on a reliable partnership, innovative tools, and the technical support needed to keep moving forward.

MII.COM/CM

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #9

Adverti$$er

NEW SAWS! NEW!

NEW!

NEW! Monet DeSauw DeRobo Linear Saw

Monet DeSauw FWA 500 Floor Web Cutter • • • • • •

• • • • • • • •

Push Button Powered Blade Angulations Single Push Button Setting for 2 Blades per Side Electronic Digital Readouts Backup Mechanical Indicators Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber 12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) 60 Pieces per Minute (4) Internal 16” Blades & (1) External 16” Cut-Off Blade Pneumatic Blade Brake on External Blade Dust Hoods Belt Waste Conveyor (under saw) Add $4,300 for 12’ Incline Waste Conveyor (adjacent to saw) Add $2,100 for Extra Set of Blades 480 Volt / 3 Phase FOBMO Call For Pricing

•

• • • • • • • • • • • • •

Automated (Truss Design Software Download) or SemiAutomated (Touch Screen Entry) Operation All Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data 22” x 40 Tooth Blade on PAE Cut 1 or 2 Boards up to 20’ (2 Second Plunge Cut) Cut Chords, Webs, Rafters, Wedges & Stair Stringers Cut Long Scarfs by MultiPlunging Servo Positioning on Infeed, Angle & Outfeed Pusher Over Travel Protection Ink Jet Printer Lumber Optimization Program Belt Waste Conveyor 480 Volt / 3 Phase / 60 Amp Includes 5 Day Onsite Installation & Training Optional Monet DeSauw Live Deck, Bunk Feeder & Incline Belt Waste Conveyor FOB MO

Call For Pricing

Monet DeSauw DeSawyer 2000 Automated Saw • • • • • • • • • • • • • • • • •

Touch Screen User Interface with Backup Mechanical Controls 3 Operating Modes: Auto, SemiAuto & Manual All 20 Axes of Movements are Computer & PLC Controlled Comprehensive Setup Screens Display Each Piece with Setup Data Anti-Collision & Optimizing Programming Auto Calibration Productivity & Time Tracking Maintenance Diagnostics Variable Speed Conveyor (0-50 Flights per Minute)with Powered Hold Downs (1) 30” x 80 Tooth Blade (27 3/4” Scarf on PAE) (4) 16” x 40 Tooth Blades (13 1/2” Scarf on Centerline) Pneumatic Blade Brakes on all 5 Blades 16 1/2” to 20’ Length Capacity (11” Minimum on Square End Blocks) Vibrating Waste Conveyor Under Saw 480 Volt / 3 Phase Includes 4 Day Onsite Installation & Training Add $2,900 for Extra Set of Blades Optional Live Deck, Label Printer, Ink Jet Printer, Catcher Display & Incline Belt Waste Conveyor.

Call For Pricing FOB MO

Buy Factory Direct From Wasserman & Associates at the same price as the Manufacturer, and get the added support and care you need to be up and running FAST! WE’LL EVEN HELP SELL YOUR USED EQUIPMENT TOO!

800-382-0329 | www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #10

Home Building Technology, Part XIII: Truss Equipment Proliferates – Component Saws By Joe Kannapell

s housing demand accelerated in the 1960s, builders increasingly turned to trusses. But, lacking better equipment, truss shops had trouble scaling up to fill their orders. Early shops had little more than radial arm saws to cut members and wood tables to assemble them. They had exhausted every means short of better equipment to improve production, such as single-cutting webs and maintaining stocks of the most common truss parts. Common trusses also served as templates for repetitive orders (examples of which I observed hanging from the ceiling in one old shop). But, as more houses were converted from stick framing, the need for labor-saving equipment became paramount. Early plants had to prove that the accuracy of their trusses equaled that of rafters cut to fit onsite. It meant maintaining consistent heel heights and seat cuts on low-pitched chords with long scarfs, while carefully monitoring the quality of incoming lumber. It also required durable saws that would maintain their accuracy making thousands of cuts daily. Fortunately, early shops had access to cutting equipment that was time tested in the west coast’s timber industry, such as the industrial-grade Mooradian saw, named after its inventor, George Mooradian. While that saw had become the dominant industrial-grade radial saw of the 1940s, it needed significant adaptation to efficiently handle truss member cutting. One firm, Speed Cut Inc., took on that task, although it was hindered by a patent that protected the Mooradian saw until 1964. Two other firms, Idaco and Clary, determined that a single blade was not enough to power a truss operation. All three of these firms were blessed with key leaders who created the first generation of truss cutting equipment, some of which still works in truss plants sixty years later. Speed Cut Inc. was formed in Corvallis, OR in 1962 to leverage sales of a time-saving length-measuring device. This hand-crank-operated mechanism, with one-footon-center stops, locked in the cut length of a board and could be added upstream of the Mooradian or any other pull-saw. In 1965, after the Mooradian patent expired, Speed Cut combined a good imitation of the Mooradian with their measuring device and christened the combined entity as the Metra-Cut Saw. Then in 1971, they added the turntable, which was targeted specifically for truss cutting. Wayne Roberts later assumed ownership of Speed Cut, where he continued to foster innovation.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #11

Idaco Engineering & Equipment Co. was organized in Oakland, CA in 1943 and, after a decade building sawmill and woodworking equipment, was asked by its parent company to find a better way to precut lumber for its homebuilder customers. To expedite this task, Idaco’s GM, Gene Woloveke, created one of the first four-bladed saws. In 1961, when Carol Sanford contracted with Idaco to stamp his plates, Sanford began referring his plate customers to Woloveke for cutting equipment. From there, Idaco’s component saw business expanded rapidly. Later in the 1960s, Idaco introduced its Universal Component Cutter, which was said to operate with saw blades that moved into and out of the cut, like an automated radial arm saw. As a complement to this chord saw, Idaco also released the first four-bladed manually operated web saw, known as a swing saw. Finally in 1971, Woloveke and Marvin Thompson created the Idaco Compon-a-matic Saw, which became a mainstay of truss plants in the subsequent two decades. Clary Corporation, a Texas subsidiary of a California company, began selling four-bladed saws in the late 1950s, relying on the inventive genius of George Mayo. His 1961 Clary Craftmaster design set the standard for features that endure today, including the rack that guides the traverse of the movable head, the square tube that drives the lumber conveyor, the lumber hold-downs, and the saw motor quadrants, among others. In 1963, Mayo incorporated the pantograph in the Craftmaster, an amazing mechanism borrowed from antiquity, that fixed the centerline of cuts as the saw blades were angulated. Eventually, Mayo achieved eight more patents that would enhance nearly all facets of truss production.

All three of these inventions provided accurate cutting, but their biggest contribution was their superior mechanical design. Idaco gained its reliability through a decade of design iterations, including the unconventional and unsuccessful design of its Universal Component Cutter. However, these steps led to the very solid and reliable workhouse Compon-a-matic Saw. The Clary design came from the amazing mechanical engineering expertise of George Mayo, one of our industry’s most prolific but unheralded innovators. Speed Cut borrowed a time-tested design and added equally durable truss-specific refinements that put the Metra-Cut in more plants than any other saw. It is a testament to the success of these three firms that, over two decades, they had surprisingly few challengers, a situation that did not change until one of them broke ranks and introduced a game changing saw… Next Month: Truss Equipment Proliferates – Assembly

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Transform your truss operation with an integrated solution from Simpson Strong-Tie. The industry leader in truss plates now brings you a full suite of software, equipment, hardware and services to drive truss component manufacturing from idea to installation. Start with CS Director™, CS Truss Studio™, CS EWP Studio™ and CS Producer™ for design, layout, production and project management. Use our powerful Monet DeSauw industrial saws to cut webs, chords, stair stringers, rafters and wedges with speed and precision. Specify ® the optimal connectors, anchors and Strong-Drive structural fasteners for every project. You can also complement your team with our professional truss design services at any time. Altogether, you have a smart solution made to increase productivity, ensure high quality and take your business to the next level. To learn more, contact your representative at (800) 999-5099 or visit us online.

go.strongtie.com/cm

EVERY CUT COUNT MAXIMUS ® High-Volume Precision Crosscutting with Integrated Package Aligner and Loop Bander

AUTOCUT ®

High-Volume Automated Crosscutting with programmable PLC Controls

SELECUT ®

High-Volume PET and Market Premium Length Crosscutting with Integrated Power Package Squeeze

TRANSCUT ® II SERIES

Portable Saws priced from $8,990*

Stationary Systems priced from $31,999*

holtecusa.com

Designed to cut whole bunks of lumber to length in less than 60 seconds with an accuracy of +/-1mm (.040”) and leave a planer finish. * It's that simple. *Specifications and prices are subject to changes without notice and results are based on HOLTEC installed V-Series systems using Scratcher® chain technology. Proper maintenance is essential for accuracy and longevity of cutting components and your results may vary. Photographs may show systems with optional accessories. All trademarks are the property of their respective owners. ©2023 HOLTEC USA Corporation. All rights reserved.

Design and build faster than ever. From plans, to walls, to panels, and everything Learn more at EagleMetal.com

above. Introducing a new level of design tools, built from the ground up.

Th e

● ● ●

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #15

PlanSwift Lumber & Bldg Mat Takeoffs Truss & Wall Panel Design Staff EWP Layouts and much more!

www.AllPoints.Tech

Dave Walstad - Panama City Beach, FL

Cell - 941-713-4395

Dave.AllPoints@gmail.com

Material Takeoffs Slowing You Down? All Points Can Help You Sell More in 2026! All Points integrates with Epicor’s BisTrack So you can be More Accurate, Faster.

Work Smarter

Sub Component Nailer Speed Up Your Production of wall panels, windows, doors, and other sub components

Block Sizes: 2x4 & 2x6 framing lumber, any length Nail Cycle Time: 1 nail 1 sec; 2 nail 2 sec; 3 nail 3 sec Machine Set Up Time: 1 sec from any prior set up Air Supply: 125 psi at 30 CFM, nothing less Electrical Supply: 120 VAC Frame: 1/4” steel plates mounted to heavy duty roll top tables and 2x2 skids mounted no install Transfer System: Pneumatic transfer for finished sub component assembly Covers: 3/16” thick aluminum Shipping Weight: 1000 lbs including crate Dimensions: Height 48”, Width 48”, Depth 10” MADE IN AMERICA BY AMERICANS See it in Action!

530-295-8068 PHONE: 800-289-5627

sales@thehaincompany.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

IntelliVIEW Suite Manage. Design. Build. The industry’s most powerful integrated component design, engineering, and management software for steel and wood-framed structures. iCommand Manage projects, customers, materials, pricing & inventory

iModel Design truss layout & profiles

iDesign Optimize material usage & engineer trusses

iPanel Design wall layouts, panelize, bundle, break & stack

eShop Maximize crew productivity & improve manufacturing efficiency

The IntelliVIEW Suite is a fully integrated software solution for the layout and design of a building’s rough framing elements—including roof and floor trusses, wall panels, solid sawn, EWP, sheathing and various ancillaries. The IntelliVIEW Suite provides the industry’s most complete analysis of the design, cost information and bill of materials—promoting increased profits by reducing plate and lumber use.

Ask those who know. They’ll tell you about the people at Alpine who make a difference.

BUILD MORE. alpineITW.com | 800.521.9790

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #17

SAWS

2016 Spida Vector Saw with Truss Automation • Automated Stop and Automated Saw Angulation as directed by Truss Design Software • Direct Drive 5.5 HP Motor with 18” Blade • Minimum Angle of 9 Degrees with 24” Stroke for Long Scarf Cuts • Automated 162 Degree Angular Movement • Adjustable Stroke Limiter for Operator Safety • Dust Extraction Outlet (Excludes Dust Collection System) • 20’ of Steel Framed/Wood Top Table with Automated 20’ Length Stop • 10’ Infeed Roller Conveyor • Touch Screen Computer with Truss Cutting Operating Software • Excludes Installation/Training and Spida Annual Tech Support Fee $35,000 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Building Component Manufacturing Industry

Job Board Tired of Massive Job Boards Giving You Useless Candidates? Post and Manage Multiple Jobs and Multiple Candidates New Application Notices and Internal Candidate Messaging Keeps your search confidential Manage on Your Phone or Computer

For Additional Information twm@Hiring-Zone.com

Visit our Website: .Hiring-Zone.com

WANTED $32-45hr. Plus Bonus Plus Benefits D.O.E

S R E N G I S DE S S TRU Full Time rid

Hyb

Design That Drives Production A truss plant isn’t just about square footage. It’s about efficiency, safety, and flow. CT Darnell Construction’s design-build approach delivers: • Facilities tailored to your operation and equipment • Smarter layouts for safer load-ins and faster turns • Integrated storage and optimized SKU management With nearly 40 years of LBM experience and more than 4,500 completed projects, we build turnkey truss facilities designed to perform from day one.

ffic

ote

Rem

In-O

Part Time

Let The JobLine Represent You! We Search our Large Network of Clients Throughout the US and Canada To Find Your Perfect Job

CT-Darnell.com | 800-353-0892

Strictly Confidential!

Visit CT-Darnell.com to see our latest truss project in action.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

The truss industry relies on 3rd party quality assurance services to provide random visits to review the plants Quality Assurance program along with their operations. If your plant needs to comply with the IRC, IBC and to those who depend on solid, experienced QA expertise, we ask you to consider selecting Timber Products Inspection, Inc. (TP) as your choice for 3rd party inspections. Proudly serving the forest products industry for over 50 years, TP brings the expertise you need to ensure your business is successful. As a responsible partner, TP delivers to clients, employees, and the industries we serve the confidence to drive value through the effective use of our diverse professional team. TP would like to welcome the following authorized agents to our inspection team, each of whom have many years of experience in the truss industry! •

Al Coffman

•

Jean Hart

•

Curt Holler

•

Chuck Ray

•

Glenn Traylor

•

Elliot Wilson

If you have questions about how you can make this selection, please contact your authorized agent above or Glenn Traylor at 919-280-5905 or trusguy@gmail.com.

https://www.tpinspection.com/ https://www.tpinspection.com/auditing-services/truss

Continued next page

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #19

Is It Possible to Learn From Mistakes? By Glenn Traylor

arly in my career, I had the opportunity to teach woodworking. For five years at North Carolina State University, I served as both a student and a faculty member within the University Student Center. I arrived with extensive knowledge of woodworking, and during my first week, I met two individuals who recognized my aptitude and experience, promptly offering me a position managing the workshop. This role soon evolved into assisting with classes and eventually becoming an instructor. My initial understanding of woodworking was primarily shaped by my father, an accomplished woodworker and craftsman, who inherited his skills from his cabinetmaker father. Thus, my expertise stemmed not from traditional classroom education, but from the apprenticeship model, which provided me with a solid foundation in both skill and knowledge. When I began teaching my first class, I collaborated with a degree-holding educator—a physics teacher from Millbrook High School—who guided me in developing a syllabus and contributed valuable insights that complemented my hands-on training. My most meaningful growth in woodworking came from my students. Some arrived with no knowledge of the craft, others brought solid experience, and many hoped to refine their abilities through formal lessons. Every class pushed me to deepen what I knew—usually in a supportive, constructive manner, but sometimes by questioning me directly. These interactions broadened my understanding far beyond what I could have achieved alone. We frequently debated techniques, philosophies, and methods. Often, a student who had just watched Roy Underhill or similar shows would ask why he chose certain tools or approaches. More often than not, my answer was that he simply used what was at hand. Teaching woodworking expanded my expertise far more than my decade-long apprenticeship ever did, and it demanded that I both increase my knowledge and be ready to justify my perspectives.

How This Relates to Components and QC I currently work as a component industry consultant, mainly teaching and coaching. My role over the last decade closely resembles my time at NCSU, especially the teaching challenges. The main difference is that my plant evaluation grades now carry weight, whereas at NCSU they didn’t affect students’ graduation or credit hours. Recently, I faced a challenge with something I thought I understood. During a plant inspection, my client questioned my findings, and an expert reviewed my evaluation. It turned out I was mistaken. While there was a clear cause for my confusion, it doesn’t excuse the error—here’s why.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #20

While inspecting lumber grades on a floor truss, I found the lumber grade stamp did not match the grade specified on the design. The drawing called out for M-30 lumber and the customer used MSR 2400 lumber. I remembered that M-24 is 2700 psi, M-25 is 2750, M-26 is 2800, and M-27 has an fb of 3000. I interpolated and used this logic: if M-27 is 3000 psi, then M-30 has to be higher. My conclusion was that this client was using material that did not have the required properties. Wrong! I failed to reference resources that would have supported (or changed) my decision. With a little more research, I would have checked the complete list of values. As shown in the complete table, M-30 is actually 2050 psi. The development of the values is not linear, so my linear thinking was incorrect. My attempt at logical interpolation is not possible in this situation.

The Bottom Line This incident reminded me how we are all continuing to learn each day—or at least we should be learning, especially from our mistakes. My four take-aways are these: 1. Our industry presents us with many opportunities to teach and to learn, especially when we are challenged by clients, employees, or even customers. 2. Each question you are asked should be answered with a solid argument. 3. As we become creatures of habit, we may answer questions too quickly, and with answers that are less than accurate. 4. We should always listen to both sides in an argument—it’s a way to learn and improve. In the end, if we don’t learn from our mistakes, we’ll keep making them, and that benefits no one.

An ANSI/TPI 1 3rd Party Quality Assurance Authorized Agent covering the Southeastern United States, Glenn Traylor is an independent consultant with over four decades of experience in the structural building components industry. Glenn serves as a trainer-evaluator-auditor covering sales, design, PM, QA, customer service, and production elements of the truss industry. He also provides project management specifically pertaining to structural building components, including on-site inspections, expert witness and ANSI/TPI 1 compliance assessments. Glenn provides new plant and retrofit designs, equipment evaluations, ROI, capacity analysis, and CPM analysis. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Klaisler Recessed Gantry Material Handling Upgrades

WizardPDS® ChannelS® Retrofit

Your Partner For Better Production Machinery | Parts | Service

Years O Experti f se!

Maintaining and maximizing productivity is essential for every component manufacturer. Whether you need a simple, affordable solution to keep your line running, reliable material-handling systems to keep production moving, or a major investment in new equipment or technology Eide Machinery Sales offers the solutions manufacturers need to stay competitive.

Gantries & Finish Presses

Retrofits & Table Upgrades

Material Handling Upgrades

Parts & Support

With 99 years in the Wood Product and Fabrication industries, we’ve supported the Component Manufacturing Industry since the beginning. Your business is our business, and our reputation is built on placing the right equipment, parts, service, and support where it matters most.

Keeping Your Production Line at Its Best.

Machinery ~ Supplies Since 1927

Eide Machinery Sales, Inc

www.eidemachinery.com

(612) 521-9193

CONSIDERING EQUIPMENT? CONSIDER CLARK. EZ-SET AUTO JIGGING EXCLUSIVE & PATENTED DESIGN Automatic Truss Jigging System to drastically reduce setup times. Allows for 100% embedment on the table, with top & bottom chord pucks in the same slot. TopSider or standard configurations available for conventional kick-leg, walk-thru, or our new trackless 8' and 10' continuous table systems. Systems for other roller & hydraulic gantries are coming soon. Available in new machine installations or for retro-fitting your existing table. The TopSider is exclusively applicable for “kick or flip leg” style truss presses such as the Tri-Axis & Lumbermater® Lumbermater® is a registered trademark of Illinois Tool Works, Inc., or ITW.

FEATURES / APPLICATIONS • Capable of 100% On-Table Nail Plate Embedment • Two Pucks Per Slot • 24", 26", and/or 30" Spacing • Compatible with all current major design software • Multiple Simultaneous Layouts LOCAL 417-235-7182 • US TOLL FREE 800-743-9737 WWW.CLARK-IND.COM / GENERAL@CLARK-IND.COM

EQUIPMENT FOR TRUSS & COMPONENT MANUFACTURERS

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #25

SAWS

Pricteion! c Redu

2017 Lauderdale Hamilton 24" Up-Cut Saw with 16' TigerStop • 10 HP (480 Volt/3 Phase) Lauderdale Hamilton Up-Cut Saw with 24” Blade • 6” x 13 1/2” Capacity • Foot Pedal Operation • Dust Outlet • TigerStop 16’ Programmable Stop • Automatic Positioning of Stop via Simple and Intuitive Controls • Infeed/Outfeed Plastic Top Tables with stands • Excludes: Dust Collector and Adjacent Computer in Orange Cabinet $13,500 NOW $12,000 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2007 Servo Auto Omni Component Saw 2007 Servo Auto Omni Component Saw – Five-blade SERVO controlled saw that has been well maintained, and is configured with [1] 30 inch blade, and [4] 20 inch blades. Cuts dimensional lumber from 2×4 through 2×12. Includes Windows 7 Pro operating system, PC controls, all available spare blades and shaker side-pans. 460 volt, 3 phase, 60 Amp electrical required. As-is, Where-is $29,997 NOW $26,997 FOB MB Wood Tech Systems 765-751-9990 www.woodtechsystems.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter... Grow faster... Achieve more... Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108

Phone: 412-262-3225 Fax: 412-262-1154

MANUFACTURERS’

REPRESENTATIVES

NEW!

New Monet FWA-500 CA Automated Floor Web Saw Price Based on Configuration FOB MO Additional Information Here 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

Safety Speed Manufacturing Model 6400 Panel Saw Safety Speed Manufacturing model 6400 vertical panel saw, 3 HP worm drive motor, 64 inch crosscut, 1 3/4" inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence. 120 volt. Starting at $5,999 (Base) FOB MN.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

HUNDEGGER lnnovationen fur den Holzbau

HUNDEGGER

_,...,_,

Hundegger leads the way in automation innovation for the truss component industry. Our advanced CAMBIUM software offers cutting-edge automation and digitalization solutions, revolutionizing operations, boosting productivity, and driving sustainable growth for manufacturers like you.

We go beyond standard mechanization; we champion true

Automation. The Hundegger TD-II isn't just a saw-it's a

REVOLUTIONIZE YOUR TRUSS MANUFACTURING WITH THE HUNDEGGER TD-II

transformative, comprehensive solution designed to streamline your production process. From retrieving lumber to optimizing, nesting, stacking, destacking, sorting, buffering, and precise delivery, our system ensures peak efficiency and productivity, tailored specifically to truss component manufacturing.

Harness the power of data with Hundegger's advanced CAMBIUM TACTICAL software. It meticulously tracks and optimizes your production, ensuring more automated operations and significant productivity gains. We provide state-of-the-art automation and control solutions that set the industry standard. Our focus on industrial automation and robotics positions Hundegger as the leader in enhancing performance and efficiency in truss component manufacturing and beyond. Hundegger products are essential for future-proofing your business. Elevate your productivity and secure your competitive edge with our advanced technologies and automation solutions, meticulously designed to meet the unique demands of component manufacturers today and tomorrow.

Don't get left behind. Invest in the future with true automation from Hundegger and see your business thrive.

om .

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #27

Adverti$$er

HSF

Hain Systems Framer

he Hain Systems Framer (HSF) will help you build square and accurate wall panels for residential or commercial construction applications. It will help you cut building costs by saving time and improving your quality. It’s a reliable, efficient and proven Electrical Supply: 110 VACsimple design. The HSF is based on a proven design with over 20 years of actual production system that features a ruggedly 1/4 HP, 110ItVAC, Linearfully Actuator useMotor: and maintenance experience. comes assembled and is designed for portable job site framing or in-plant permanent Highly Accurate: +/- .010 Inches installation. The table has many optional attachments and will support Mylar Tape wall layout or any other type of layout. The Stop Rail: 2 x 4 x 1/4 Aluminum Extrusion optional gun rails can also be retro-fit to any table. Stops: Jig Bored Steel Stop Blocks:

Internal Components: Details: Dimensions: Table Construction:

Air Supply:

Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5Structural feet (60”) to 60 feet (720”) Thick-wall Steel Tubing, Jig Welded for Accuracy Height: 12 inches 90Depth: psi (10 12 CFM Air Flow Recommended) inches

If you are looking for the fastest, mostVAC consistent way to measure and cut your product, Electrical Supply: 120

then the Hain Measuring System (MEA) is your answer. The MEA changes from one length

Powder Graythe operator’s position on the line. It t any lengthCoat: instantly, up to 60’,Industrial without changing

is also highly accurate (+/- .010) and quickly moves from one length to the next in Dimensions: Height: 43”

seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first

time user will be productive with little or no16’ training required. It can adapt to any saw and or 20’ Length: can be mounted to any surface so that you can integrate the MEA with your existing

Adjustable to 10’ or 8’ operation to 12’ and Width: setup. The MEA is versatile allowing “left” or 8’ “right” handed

measurement in “feet and inches” or “inches” depending on your preference. The MEA is Shipping Weight: 3000 lbs also available in a “Skid Mounted” version.

theHAINCOMPANY 6125 Enterprise Drive, Unit 92 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com

Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:

110 VAC 1/4 HP, 110 VAC, Linear Actuator +/- .010 Inches 2 x 4 x 1/4 Aluminum Extrusion Jig Bored Steel Machine Billet Aluminum Hardened, Ground and Polished Steel and Billet Aluminum Length: 5 feet (60”) to 60 feet (720”) Height: 12 inches Depth: 12 inches

If you are looking for the fastest, most consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+/- .010) and quickly moves from one length to the next in seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing setup. The MEA is versatile allowing “left” or “right” handed operation and measurement in “feet and inches” or “inches” depending on your preference. The MEA is also available in a “Skid Mounted” version.

theHAINCOMPANY 6125 Enterprise Drive, Unit 9 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com

BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.

2004 Alpine ALS 276 Linear Saw

FOR OVER 20 YEARS

ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS

GOOSENECK TRUSS TRAILER 32’ & 36’ also available with Split Rollers (pictured with optional Top Roller)

STANDARD TRUSS TRAILER 40’, 48’ & 53’ sizes available

HEAVY DUTY TRUCK ROLLER BED Custom Built to The Size you want for all Major Truck Brands

EXTENDABLE TRUSS TRAILER 38’-53’, 42’-60’, 50’-70’ & 53’-80’ sizes (pictured with optional Headache Rack)

Scan the QR Code to take you directly to our website. For more information or to request a quote Email: sales@precisionequipmfg.com or call 1-800-237-5161 PHONE: 800-289-5627

$40,000 Pricteion! c Redu • Servo Controlled Single Blade Linear Saw • 7.5 HP Motor (230 Volt/3 Phase) with 20" Blade • Touch Screen Computer • Ink Jet Printer • 20' Infeed & Outfeed Roller Tables

NOW $35,000

FOB HI • Waste Conveyor (under outfeed conveyor) • Extra Programmed Computer • New L1 and L2 Belt • 2 Extra Blades

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

You’ll be well looked after, with our complete offering. Want the best customer experience? Choose Spida Machinery for knowledge and expertise across your whole machinery journey.

SALES

FACTORY LAYOUTS

INSTALLATIONS

SERVICE & SUPPORT

Contact the Spida Regional Account Manager for your region today and find out more! E sales@spida.com

T +1 866 647 7771

spida.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #29

Using Smart Machinery to Help Your Team Do Its Best Work Wendy Boyd Chief Customer Officer Machinery Group Spida Machinery

s we start a new year, many frame and truss manufacturers are focusing on a familiar challenge – how to support their teams, maintain output, and continue delivering a quality product in a labor market that’s tighter and more competitive than ever.

While technology and automation often take center stage at industry events and discussions, I believe the real story comes down to this: smart technology is about supporting our people – making their jobs safer, easier, and more efficient, and helping businesses retain the skilled operators they rely on.

Good people are hard to find and worth supporting Across the industry, teams are being asked to do more with fewer hands. Experienced framers and truss builders are invaluable, and the ability to attract and retain them is becoming a key component for successful plants. This is where your equipment choice matters. Machinery should enhance the capabilities of your team, not overwhelm or confuse them. The right tools allow good operators to thrive, with new team members getting up to speed faster and everyone working with confidence.

Reducing the physical load One of the biggest contributors to turnover in manufacturing is physical fatigue. Smart machinery helps by doing the heavy lifting – both physically and mentally. Features such as automated infeed and outfeed, automated puck systems, and truss stackers all help reduce strain on your operators. Less fatigue means fewer mistakes, fewer injuries, and better consistency throughout the day. When your people feel supported physically and mentally, they perform better.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #30

Creating a more predictable workday Unplanned downtime is frustrating for management, but it can be even more frustrating for the team working on the factory floor. Staff want to feel productive and successful and not be stalled by equipment that is difficult to run, inefficient, or ineffective. Investing in dependable machinery helps remove the uncertainty of what the day brings. When systems operate as intended – smoothly, repeatedly, and intentionally – operators can focus on doing their best work and producing great production numbers, which also builds confidence.

Upskilling new team members As new team members enter the industry, companies need machinery that shortens the learning curve and empowers the employee for success from the get-go. Smart designs, intelligent interface, and guidance tools on the system allow new operators to contribute faster and with less errors. We all know this is a niche industry and training is intensive, but we can help them build confidence quickly.

A better work environment attracts better people When a plant runs smoothly, efficiently, and safely, it becomes a workplace where people want to work. We know that operators respect a clean workplace with well-maintained machinery with intuitive systems – this sends a signal that the company values quality, and their workforce is part of that value system. People want to work where they are safe, productive, trained, and supported. We all value the success this brings. As we step into 2026, many manufacturers are asking where to invest next. While automation and production speed are serious drivers to success, often the best ROI comes from supporting the people that keep the plant running every day. Smart machinery reduces the strain of a physical job – it improves confidence, provides consistency, and helps teams operate at their best. When the business owner supports the team, then everything else follows: quality, output, morale, and long-term success. At Spida Machinery, we’re here to help you, so please reach out when you’d like to discuss how our smart machinery can benefit your operations.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

CREATE. CONVERT. SHARE. BUILD.

Paragon gives you the flexibility to control your tools, partners, and process. TRUSS LINK

ANY PLATE

Any18

Any18HS

Any20

Any20HS

TDD

.TPS

.TRE

.TRS

.IFC

.DXF

.TDL

.QCX

.CYB

CUT

WWW.PARAGONTRUSS.COM

Expert Advisement for Wood Component Manufacturing Lean Best Practices

Labor Time Studies

Full/Non-Automated

Building Designs

Across All Areas — Manufacturing, Sales, Design, and Administration √ Productivity Improvement for every departments.

√ Reliable Proven Time Units — R.E., S.U., Work Minutes. √ Employee Optimization — reduce costs, turnover, & vacancies. √ Equipment & Facility Design Recommendations for maximum

efficiency.

Sound advisement should be honest, direct, and completely unbiased— delivered in just four days with a clear roadmap of actionable solutions, not after endless weeks of continued billings. For more than 20 years, TDC has helped CMs cut costs, optimize automation that truly fits their needs, and boost profits through clear, independent expertise. TDC focuses on what matters most: your performance, your ROI, and your success.

Trusted by Industry Leaders “This information allowed us to estimate “Your expertise in this industry will be “There are no words to express how thankful our jobs with a dramatically increased level greatly beneficial to us as a company we are that we chose to start changing our of accuracy on each project, regardless of as we continue to grow this business with assistance from Todd its level of complexity. The time standards relationship. We look forward to the Drummond. The moment he walked through also gave us the information to measure future and are excited to have our doors, he immediately began to gain our our production and establish target output someone with your knowledge trust and open our eyes to the areas upon for each workstation in our shop.” which we needed to focus our attention.” working with us." — Gordon Tober, Leduc Truss Inc.

— John Hall, Mathew Hall Lumber

www.todd-drummond.com

— Ryan Lodermeier, Kamloops Truss Ltd.

todd@todd-drummond.com

(603) 748-1051

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #33

SAWS

1994 Timbermill Model MH5G-20 Component Saw Five blades cut lumber from 2″ x 4″ through 2″ x 12″, 4″ x 2″ lengths from 12 inches to 20 feet, including four-angle floor webs from 18 inches. All powered movements. Saw includes (1) 30″, (2) 20″ and (2) 14″ blades, analog scales, chain-drag scrap conveyor with chain-drag scrap incline, and an extra set of blades. Additionally this saw includes an extensive spare parts inventory including: Contacts/Starters, fuses, push buttons, limit switches, crank handles, scales/rulers/dials, angulation, conveyor, and saw motors, universal joints, and arms for outfeeds. 480 volt, 3 phase electrical required. $17-924 FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2018 Spida Plate Marker with DeWalt Saw • 20' of Steel Framed Table with Plastic Top • Spida Automated 20' Length Stop/ Plate Positioner • Auto Plate Positioning with Manual Marking • Control Cabinet Enclosure with Touch Screen Computer • DeWalt Model DWS780 Miter Saw • Support Table for DeWalt Saw • 10' Infeed Roller Conveyor • Excludes Dust Collector & Spida Annual Support Fee $19,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com

$69,880 FOB WA 2024 Spida Automated Apollo Saw • Automated Truss Length and Angle Cutting as directed by Truss Design Software Output • Direct Drive 7.5 HP Motor with Automated 160 Degree Angulation & 18" Blade • Minumum Angle of 10 Degrees with 36" Stroke for Long Scarf Cuts • Braked Saw Motor, Safe Grip, Variable Stroke Limiter & Plexiglass Shield for Operator Safety • 20' of Steel Framed/MDF Table with Automated 20' Length Stop & 10'

Gravity Conveyor • Workstation, Control Cabinet Enclosure & 21" Touch Screen Integration • Kufo Dust Collector • Spare Parts • Truss Cutting Operating Software • 480 Volt / 3 Phase • Lighty Used • Excludes: Installation/Training & Annual Technical Support Fee

800-382-0329 | www.wasserman-associates.com

WANTED $32-45hr.

2004 Alpine ALS 276C Linear Saw $39,990 FOB OH

Plus Bonus Plus Benefits D.O.E

RS E N IG S E SD S U TR Full Time rid

Hyb

ffic

ote

Rem

In-O

Part Time

Let The JobLine Represent You! We Search our Large Network of Clients Throughout the US and Canada To Find Your Perfect Job

Strictly Confidential! See Our Job Postings at www.thejobline.com PHONE: 800-289-5627

Cuts wall and truss parts from lumber depths 2×4 through 2×12, 60”+ scarf cuts, internally optimizes material (up to 11 7/8″ x 1.5″ EWP) Includes 20 foot OEM auto-infeed conveyor and 15 foot OEM outfeed conveyor, and under-saw scrap conveyor with belt-type incline. All servo controlled functions, Microsoft Windows XP OS, 7.5 hp motor with 20” carbide tipped blade. Includes spare infeed/outfeed belt and any available spare parts. No printer is included. The door latch needs to be repaired. 220v / 3 ph power, 125 PSI air required. 765-751-9990 www.woodtechsystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

The Auto-Feeding RetroC

The Amazing RetroC by Enventek

A complete wood processing system proven to profitably feed cut lumber to truss plants of all sizes. Easy to use, simple robust automation that is scalable with less labor. A RetroC holds calibration.

Out Produces Any Saw in Batch Cut or Cut by Truss Mode

Auto-Feeding, no upper hold-downs (just 15 automation axes) with electronic braking. Efficient material handling that will significantly increase cut piece production with reduced operating costs and improve truss build times with consistently accurate cut pieces.

The Magic of SpeedCatch - No Catching Labor Catching labor is eliminated with our optional SpeedCatch cart system. Sophisticated SpeedCatch software enhances the efficiency of truss production by effectively collating and organizing the lumber at the truss tables. SpeedCatch upgrades the RetroC to a comprehensive one-person (sawyer) wood processing system.

(416) 888-4457

Edmond.Lim@LimTekSolutions.com

www.LimTekSolutions.com

6021 Yonge St, Unit 1019 Toronto, ON, M2M 3W2

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #35

SAWS

Speed Cut Saw with Hain Measuring System • Speed Cut Metra-Cut Saw • 5 HP / 3 Phase Motor with 16” Blade • Saw Barrier Guard • 20’ Hain Powered (1 Phase) Measuring System • 20’ Infeed & 20’ Outfeed Roller Conveyor with Stands $14,900 FOB UT Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Alpine AutoMill Component Saw 2000 Alpine AutoMill model 343H, (5) blade component saw, cuts lumber from 2×3 through 2×12, from 18″ to 20′, 4-angle floor webs from 18″. Includes powered length and angulation, digital readouts, (1) 32″, (3) 18″ & (1) 20″ blade, shaker under-saw scrap conveyor, incline, PC with Windows 98 o/s, and outfeed conveyor. Decommissioned in 2018. Stored indoors. 480 volt ,3 phase electrical required. $10,497 FOB ON Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Name Encoder Encoder Encoder Encoder Encoder Encoder Encoder Encoder Encoder Encoder Encoder Drive Board Drive Board

Brand

Qty.

Used?

Part No. / Description

Dynapar

Function

Model #

Serial #

H220360110022

Up / Down

344B

344B01013

Dynapar

New

H220360110422 PS

Up / Down

Dynapar

7 7

New New

H220360110422

Pricteion! c Redu

$534.65

$5,075.28 $1,603.95

Dynapar

New

H220060110422 PS

$529.57

Dynapar

New

H220060110422

$529.57

$1,059.14

$661.28

Dynapar

New

HR6250360900

Minarik

Rebuilt

115 Volt

Minarik

Rebuilt

230 Volt

New

7585DT-2 Open Frame Display 12.1"

Drive

Servostar

Rebuilt

Drives feeder chains

Alpine

New

$0.00 $0.00 $0.00 $0.00 $0.00

Computer

New

Programmed - Came from Alpine

Modbus

New

TSX C USB MBP

$0.00 $0.00

Servo Motor

New

MT304A1

$446.00

$1,338.00

Servo Motor

New

MT302A1

$1,188.00

E-Stop Control Cable

Telemecanique

New

XY2CE2A196H7

$440.61

Selector Swith

Allen Bradley

New

800EM-SM22

$36.71

$73.42

$169.71

Selector Swith

Allen Bradley

New

800MR-NH2QB

ICE Block / Contactor

Finder

New

40.31 10 Amp 250 Volt 24 Volt D.C.

Ironman

2 1

New New New

$0.00

2 sets

$0.00

A section of approx. 3 feet... not a whole chain Left Hand; NH-BMQ-824-50-L-56

Gearbox

Ironman

Used

Right Hand; NH-BMQ-821-50-R-56

Gearbox

Grove Gear

Used

Carriage - Double Shaft; SP.23UF-2

$0.00 $859.28 $683.74 $400.00

$859.28 $683.74 $800.00

Gearbox

Grove Gear

New

Right Hand; 23UF-1

$637.99

Gearbox

Grove Gear

Used

Double Shaft; 20-UF-2

$1,498.00

Gearbox

Grove Gear

New

Carriage - Double Shaft; (SP)MB23UF-2

$400.00

Gearbox

Ironman

New

Angle; NH-FH-826-50-HR-23

Gearbox Gearbox

1 Used & 1 New

$0.00

Grove Gear

$400.00

$800.00

Grove Gear

Guide Bearings

McGill

New

CF 1 1/4 S

$27.05

$108.20

Philips

New

F15T8/CF

$3.89

$19.45

New

BAD GEARBOX FOR PARTS: SP MB26Y-2

$0.00

Used

Lumber Hold Down Springs & Bolts

New

Lumber Hold Down Chain Sprocket

New

Lumber Chain Sprocket

New

Shaker Mount Plate

New

Overhead Arm Guide Rollers & Bushings

New

Shaker Pan Bushings

New

Lumber Stops

Saw Brake Rotors Saw Brake Calipers

Angle; SP MB26Y-2

$1,686.00

Cabinet Light Bulbs

Box of Misc. Gearbox Parts

PHONE: 800-289-5627

$641.05 $1,603.95

$845.88 $534.65

Computer / Data Cable

Serving the Structural Building Components Industry

$2,564.20

$641.05

Carriage

HC52550009000 H220060110022

Arms for Hold Down Chains

$3,288.60

Carriage Carriage

H221000110022

New New

Live Deck Chain

Component Manufacturing dverti$er

$939.60

$469.80 $641.05

H221000110422 H221000110422 PS

New

$3,649.17

$469.80

New New

3 6 3

Cord for PC

Gearbox

The

$521.31

4 1

Dynapar Dynapar Dynapar

Touch Screen Monitor

Striebig Optisaw, model Optisaw Automatic (Type # 5164) vertical panel saw station, with angled frame supporting material being cut: Max. cutting height (vertical) 5′-4″, max. cutting length (horizontal) 15′-1″, max. cutting thickness 2.36″. Both vertical and horizontal analog measuring scales on frame. Cutting head manually rotates from vertically to horizontally for rip vs. cross-cutting, adjustable spacers for repetitive cuts, 5.25 HP saw motor, 9.84″ diameter blade, guide bearings for travel , push button controls, e-stop button and dust extraction hose (no vacuum included). Overall footprint of station 19′-1″ wide x 4′7″ deep x 7′-10″ height. Sold for $36,000 new. 208 volt, 3 phase electrical required. $14,490 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Alpine List Price Est. Market Value / List

Dynapar Dynapar

Telomatic

New

$0.00

$0.00 $0.00 $0.00 $0.00 Red - Under Shaker

$0.00 $0.00 $0.00

@ end of arms

New

2 Large; 1 Small

New & Used

2 New; 07280000

$0.00 $0.00 $176.54

$706.16

Misc. Brake Parts / Caliper Mounts

Used

$0.00

Misc. Data Cables

New

$0.00

Saw Blade

Retipped & Resharpened 32"

$0.00

Alpine AutoMill RS Parts Alpine AutoMill RS Parts per Uploaded PDF $23,500 NOW $19,500 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

NEW Hain 20' Powered Measuring System Adapts to Any Saw. Left or Right Hand Operation. Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers). Motor: 1/4 HP Linear Actuator (110 Volt). Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion. Stops: Jig Bored Steel. Stop Blocks: Machine Billet Aluminum. Optional Lengths from 5’ to 60’. Optional Gang Stop. Add $890 per 10’ Section of Heavy Duty Roller Conveyor with Stands $8,990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

BCE-MASTER INTRODUCING THE ALL NEW

IN 8' & 10' WiDE

AUTOMATiC OR MANUAL

HEAVY DUTY TABLE TOP

T-SLOT OPENING FOR JiGGiNG

20' TO 40' iN LENGTHS AT YOUR REQUEST

Element Equipment

a brand manufactured by GOW Group Inc.

Experience the unparalleled expertise of our building components equipment manufacturing company, delivering top quality equipment built with the customer's needs in mind.

SCAN HERE

OR CONTACT US FOR MORE iNFO 1 (800) 799-4711

info@element-equipment.ca

Our Latest Installation Project www.element-equipment.ca

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #37

$118,997 FOB GA

2014 Monet DeSawyer 2000 (Non-servo) five-blade, automated component saw using a touch screen interface and Windows 10 OS for direct input. Operates in automated or manual input mode. (1) 10 h.p., 30″ diameter blade with PAE setup & (4) 5 h.p. 16″ diameter blades with center line setup. 16″ blades cut angles from 3º to 115º, 30″ blade from 3º to 100º . Minimum 90/90 cut is 10 inches and shortest 4-angle cut is 18 inches. Cuts 2×4 through 2×12 lumber up to 20 feet in length. 765-751-9990 www.woodtechsystems.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

ACER INC Support You Can Count On

Every Ranger system is set up and tested in our plant before shipping.

Call Acer for fast, friendly support. Whether you need technical, parts, or system design assistance, we’re here to help. Acer Inc. 301 Industrial Drive Rushford, MN 55971 507-864-2220

www.acerinc.com

RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents pending.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #39

Building for Success!! By MiTek Staff

s we enter 2026, with the excitement of the holidays behind us, we ask ourselves, what do we need to do to ensure that the best is yet to come? In reflecting on the start of another year, we have asked ourselves, what do we need to do to succeed? How can we do things better? How can we be better? … These are age-old questions that we venture every business leader has asked of themselves and their team, regardless of their role or specific department inside the organization. But in reflecting on the triumphs and challenges of the past year, there are a few insights that we would like to share, that in part answer these age-old queries. While it may not provide the exact tactical information for your specific business, we believe these insights will, in fact, help to point us all in the right direction! You may be surprised, or even disappointed, when you realize that the answers to these questions really have been in front of you all along, but these actions can be key to driving success in any organization. The first of the golden rules to drive success is simply … Remember to focus on your customer! Not just remembering who you sell to, or who you provide services for, but truly understanding your customer. This goes far beyond the names of the contacts that you engage with, or the location of their office or plant, but truly understand your customer! Why are they in business? … What is their mission and vision for their business? … How do they deliver value to their customers? And more specifically, what are their needs and how can you better support them? How can you deliver even more value to them?

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #40

In always remembering to focus on your customer, you can understand who they are as a company, why and how they do business, and most importantly, how you can help them be better at what they do! This may seem obvious, but many businesses can quickly lose track of this focus and become distracted by other things. Never lose focus on your customer! The second golden rule of success … Invest in your team!! For some organizations it can be easy to remember that the real value of the company, and what drives the business, is your team. Having “grown up” in the consulting engineering world, it always seemed so natural, and obvious, that we have a responsibility to learn from those around us, and to teach the next generation. As a “mentor – apprentice” profession, where you are required to learn the practice by working under the tutelage of a licensed Professional Engineer, it was engrained in us from the start. That simple idea, whether you phrase it as “doing for others what was done for you” or “paying it forward,” the professional idea is that we can deliver the greatest value to ourselves, our coworkers, and the organization by teaching and training others to enhance the overall capability and capacity of the organization. By investing in the training and development of our teams as leaders, it can have a multiplicative effect on the organization. If we were to simply invest in ourselves, the effect would be much smaller, and less significant. In training and educating our teams not only are we investing in our team, but we are building an organizational culture that values our people, emphasizing continuous improvement and professional development. While investing in your team, you will also be surprised what dividends that investment will pay. Studies have shown that performance and productivity both increase when organizations show commitment to investing in their teams. Whether it is advanced training or certification for a manufacturing role, technical training for designers or engineers, or leadership/business training for managers, there is real value in developing the talent and capabilities of your team. Provide mentors for new team members, or team members in new roles, to help them integrate into the business or role. Investing in your team will enable your organization to not only meet the needs of your customers, but to excel and achieve more than ever before.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #41

The third golden rule for success … Pursue collaboration and teamwork! This rule applies to the organization, both internally and externally. As part of the building and construction industry, we strive to deliver an aesthetically appealing, high-performance, cost-effective, building solution that meets the needs of the user, whether that is a house, an office, a retail building, or a manufacturing facility, and we all have a critical role to play in that process. In the building and construction industry there are very few, if any, who can provide the full solution “in-house” without collaboration, whether it is envisioning and engineering the design, incorporating the latest technology, manufacturing the high-performance building components, or constructing the finished product. We all have our critical role in the process, and collaboration and teamwork are the keys to success! Through collaboration and teamwork, we can achieve far more together than we can apart! While collaboration and teamwork can take different forms, ranging from simple teamwork between design and manufacturing groups within the organization, to strategic collaboration between businesses within the industry, or simply collaboration within industry associations, all of these enable us to challenge the norm and drive the industry forward. And finally … Practice these golden rules for success together! When integrating these golden rules for success together in business, there is an opportunity for exponential growth and success! By training your team, and enabling them to better focus on and meet the needs of your customer, then pursing collaboration with your customers, other suppliers and manufacturers, and the construction contractor or builder, a synergy can be achieved where the needs of each partner are better understood, more effectively addressed, and the ultimate needs of the end user are more directly, efficiently, and cost-effectively achieved! In the end, what we are most proud to say is that, at its core, this is the MiTek way of doing business! Thank you to all our customers, industry partners, and those who we have collaborated with over the years. We are proud of all that we have achieved together and are excited for the future! We cannot wait to see what we can achieve together in 2026. Let’s build for success!! If you would like to learn more about MiTek, or have any questions, please contact us.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

https://cadynce.com

Th e

● ● ●

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #43

PlanSwift Lumber & Bldg Mat Takeoffs Truss & Wall Panel Design Staff EWP Layouts and much more!

www.AllPoints.Tech

Dave Walstad - Panama City Beach, FL

Cell - 941-713-4395

Dave.AllPoints@gmail.com

Material Takeoffs Slowing You Down? All Points Can Help You Sell More in 2026! All Points integrates with Epicor’s BisTrack So you can be More Accurate, Faster.

Work Smarter

Sub Component Nailer Speed Up Your Production of wall panels, windows, doors, and other sub components

530-295-8068 PHONE: 800-289-5627

sales@thehaincompany.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the SAWS

January 2026 #18318 Page #45

Adverti$$er

GOOSENECK ROLL OFF TRUSS TRAILERS

26’, 32’ & 36’ sizes available, Split Rollers available too!

2 YEAR WARRANTY ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS 1999 Alpine SpeedCut Centerline Pull-Arm Saw 1999 Alpine Metra Cut, model SSA-17, pull arm, centerline saw. 16″ blade, maximum cutting depth of 6″, maximum scarf length of 31″, 164 deg. cutting range and 5 HP motor. Includes push-button on/off controls and analog angle measure on turntable. Need re-assembly. 220/440 volt, 3 phase electrical required. Call For Pricing, FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2005 Alpine ALS 276C Linear Saw 2005 Alpine ALS 276C linear-feed saw (Refurbished in 2015). Cuts wall and truss parts from lumber depths 2×4 through 2×12, 60”+ scarf cuts, internally optimizes material (up to 11 7/8″ x 1.5″ EWP). Includes 15-foot idler roller infeed conveyor, 15-foot idler roller outfeed conveyor, and under-saw scrap conveyor with belt-type incline. All servo-controlled functions, Microsoft Windows 10 OS, 7.5 hp motor with 20” carbide tipped blade. Includes any available spare parts. No printer is included. 230v, 3 ph power, 70A electrical required. Includes step-down transformer. 125 PSI air required. $39,991 FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com

! W E N 2023 Northfield Model 410 Upcut Saw NEW 2023 Northfield model 410 upcut saw available for immediate shipment. 90/90 degree cuts to 4″ x 10″ capacity (fence forward position) to 2″ x 14″ (fence rearward position). Saw is configured for material from left to right, with 3″ x 6″ air operated cylinder, filter, regulator, lubricator, 10 HP motor, enclosed steel base with cast iron table, magnetic starter and adjustable operating speed from 20 to 60 CPM. Includes optional two-palm controls, additional 4″ dust outlet, NEMA 12 electrics with fused disconnect and two 18″ diameter 60 tooth blades with 1″ diameter bore. 460 volt, 3 phase electrical required. $18,630 FOB MN Wood Tech Systems 765-751-9990 www.woodtechsystems.com

(Shown with Additional Top Roller option)

VALUE PACKAGED WITH PIN LOCKS, LOAD CONTROL, LED LIGHTS, STROBE LIGHTS & MORE!

BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.

Scan the QR Code to take you directly to our website. For more information or to request a quote Call or Email: 1-800-237-5161 sales@precisionequipmfg.com

MANUFACTURERS’

1982 SpeedCut MetraCut Centerline Saw 1982 Speed Cut Metra Cut, model SSA-11, centerline saw, 16″ blade, maximum cutting depth of 6″, maximum cut length of 31″, 164 deg. cutting range and 5 HP motor. Includes push-button on/off controls and analog angle measure on turntable with air stop, 20′ long infeed conveyor with OEM SpeedMeasure, 20′ long outfeed conveyor and one (1) spare blade. 208 volt, 3 phase electrical required (can be converted to 240v/440v). $6,990 FOB WY Wood Tech Systems 765-751-9990 www.woodtechsystems.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

FOR OVER 20 YEARS

REPRESENTATIVES

NEW! New Monet DeRobo Linear Saw New, DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and open-stair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, left-to-right feed direction standard, lumber push and pull grippers for more accuracy, ink marking on the 1 1/2" face of the incoming boards and small piece capture and delivery to the front of the saw for easy access. Infeed deck and bunk feed are shown as options only. 480 volt, 3phase.

$257,000 FOB MO. 765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

SBCA Knowledge Center Technical FAQs Legacy SRRs Code Summary Reports Design Guidance Construction Guidance Test Summary Reports White Papers

KCENTER.sbcacomponents.com The SBCA Knowledge Center is an Extensive Library of Free Downloadable Structural Building Component Resources The library includes research reports, white papers, presentations, videos, and much more. All the resources are focused on structural building components and the greater construction industry. Access to the library is available to SBCA Members and guests.

kcenter.sbcacomponents.com

FREE DOWNLOADS

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #47

Adverti$$er

Terminailer

NEW!

Price: $237,900 FOB: ND

The Terminailer all but shatters the stereotypical myth that sub-component equipment is essentially peripheral – unimportant. And it does so by quickly and accurately driving far more framing nails in your wall panel jobs than ever before. Whether in your shop or in the field, one operator sets the pace for production and quality, which reduces labor costs and other aspects of overhead.

The new Terminailer V.8 improves on the previous generation Terminailer in several key ways: All new HMI/Software

Reengineered air system

• Siemens Pivoting HMI Touchscreen display to operate from either side • On-screen tutorial for all menu items • Operator now controls functions such as process speed, nail spacing, nail patterns, etc. • Simplified input commands Nail Feed Complete Redesign • All new frame to allow for redesigned nail coil placement with direct feed path • EverWin PN90-PAL industrial tools now standard equipment • New nail guides with spring-loaded tensioners • Nail coils move with vertical travel of the nail guns

• SMC “Soft–Start” Pneumatics • Simplified air for control to all components: lift– cylinders, triggers, stop–gate, etc. • Direct air supply to each nail gun for improved nailing performance • All pneumatic elements are clearly labeled for EZ service and adjustment Overall Features • Pharmaceutical grade assembly, industrial grade durability • “Block–wheel” redesign for 3X increased applied force • Approximately 1,200# of applied clamping force resulting in straighter finished • Subcomponents from even the poorest lumber • Larger doors for easier access to interior elements including coil–nail spools

Terminailer is an event-driven, sub-component assembler that will quickly and accurately drive 30% to 70% of the framing nails in any wall panel job. In your shop or in the field, one operator sets the pace for production and quality. The Terminailer functions independent of design software, requires zero set-up time when switching between any configuration, and requires no special operator training. The Terminailer is easy to move around the shop so its location can evolve as your shop evolves. With all of the nailing occurring in the closed main chamber, nail injuries and nail location misfires are eliminated, making your plant that much safer. With nearly ten years of development from people that know machinery, it is assembled to exacting standards, well supported, and it is easily maintained with shelf-item parts. Terminailer: vetted, tested, and ready to drive maximum productivity for you. Be sure to check out our videos below for a quick review of this revolutionary machine! 208 volt, 3-phase, 21 (full load) Amps, 60 Hz electrical required. 50 SCFM @ 100 PSI air required. Net weight 7,000 lbs..

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #48

When the Going Gets Tough,

Innovate!

n 2013, I launched LimTek Solutions with a clear mission: to promote, market, and sell Enventek’s groundbreaking truss manufacturing technology, first developed in 2007. For over a decade, it’s been full steam ahead and we have cultivated an impressive Feed the Beast! customer base.

Edmond Lim, P.Eng. LimTek Solutions Inc.

Now, as we approach 2026, we’re facing something new: a slowdown. But we have turned this slowdown into an opportunity. This pause has given Enventek the space to perfect the NEXPLATE Automated Plate Picking and Sorting system, creating an entirely new category in truss plant automation. NEXPLATE will continue to transform the industry by helping truss manufacturers boost production, improve quality, reduce labor challenges, and enhance safety. When the going gets tough, the tough don’t just keep going—they innovate!

Rising to the Challenge This recent slowdown has given me a unique opportunity to step back into the “plate side” of the truss industry—a space I haven’t been deeply involved in for years. It’s ironic because we’ve spent over a decade helping truss fabricators grow profitably with one-time CapEx investments. Now, with NEXPLATE, we’re introducing another game-changer: an automated plate picking and sorting system that creates an entirely new category in truss plant automation. And yes, I can’t help but smile and say, “We have a great camera—too bad we don’t get to sell the film.” No one would say, “Hey, a slowdown would be great right about now,” but a slowdown is an opportunity to review what’s working, what’s struggling, and what we should do next to improve our business and our industry. Opportunities exist everywhere, and it is up to us to put our minds to work and innovate. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #49

Learning From Our Mentors For more than three decades, I’ve been very fortunate to draw on lessons I’ve learned from the great Charlie Vaccaro. I am honored to call him a mentor, and I am forever grateful for his friendship. Many may not realize this, but for roughly two decades at the end of Charlie’s legendary career in this industry, he took a special interest in Canadian truss fabricators and hosted numerous Florida plant tours along with me to the benefit and enjoyment of all attendees and hosting truss plants through his insight and wit. Which brings me full circle to Charlie Vaccaro’s timeless article, “A Fable For Our Time.” This story is a must read for everyone in the offsite construction industry, because everyone is in sales when it comes to value-added manufacturing. Please enjoy this story (which appears on the next few pages of this issue)...and take it to heart. It was an important lesson when Charlie wrote it so many years ago, and unfortunately it still rings true today. When we don’t value our work and effort, then no one else will either. And of course, when you’re ready to take a plant tour, please reach out! I’ll be happy to toss in a few more Charlie stories, too. https://limteksolutions.com/#solutions

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #50

Adverti$$er

A Fable For Our Time By Charlie Vaccaro

Chapter I The Idea One day a certain builder had an idea for a spec house that would be a sure winner. So, he got together with the best architect in the area and began to describe what he wanted. “Mr. Architect,” he said, “I want the house to have a studio vault with no supports showing so the den will blend right into the living room. The vaulted ceiling in the living room should make it look as big as possible.” “And while you’re at it, put a cambered ceiling in the kitchen so we can have indirect lighting. You know how popular that is. Just make everything volume, volume... and plenty of angles, too.” The meeting went on and on and soon the architect’s notepad was packed full of the wishes and particulars of the enthusiastic builder.

Chapter II

The Plan

Several weeks passed during which the builder and architect met a few more times. Then finally they reviewed the finished plans and the builder was happy. The architect had incorporated every idea and feature. Why the builder didn’t even balk when the architect submitted his bill for 180 hours at more than $50 per hour!

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #51

“It’s a complicated plan so I’m not surprised it took so much time to design it,” said the builder. Yes, the architect had worked long and hard on the foundation, walls, room dimensions, soil tests, and the site itself. But when it came to the roof and ceilings, he simply drew perimeter lines and added a note – TRUSS BY MFG.– then in the specifications he requested the designs be submitted for his records. Is my little story beginning to sound familiar? Brimming with confidence, our eager builder began to put the plans out for bid – to concrete and framing contractors and other labor bidders... and to his suppliers.

Chapter III The Changes The call from the truss estimator came within hours. “At least a dozen changes must be made before the roof and ceilings will work,” he said. “Walls must be moved, others raised and some lowered. What’s more, we’ll need to put supports where none show and change some of the contradictory dimensions.” Having no idea of the scope of the problem, the builder referred the truss estimator to the architect who quickly realized this was too complex to handle on the phone, so he asked the estimator to meet at his office. “Let’s see what I can do to help you out,” said the architect, who then sat quietly as the estimator went down the list of problems with the plans. “Well, what would you do with my design to make the trusses work,” asked the architect. After a deep sigh, our friend the truss estimator explained in detail the many changes necessary... and the architect agreed to make them. It seems like this should be the end of the story. But we all know better.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #52

Chapter IV The Bids In pricing the job, the estimator considered dozens of different designs before he was satisfied that his bid was for the best trussed roof possible – $13,000 on the $180,000 house. Of course, this didn’t include the estimator’s time nor the cost of trips back and forth to meet with the architect. Nor did the bid consider his expertise in showing the architect how to make the plan work. “Even though I deserve compensation for these factors, I can’t add them in,” he thought to himself. “My competitors never do.” Meanwhile, the architect had marked down his own time, including meetings with the estimator, and the reissuance of the plans with the changes – and he charged it all back to the builder. As soon as the bids were all in, the builder called the lumber dealer’s salesman. “Your bid on the trusses is $800 too high! You’ll have to get it in line if you want the job.” So, the estimator reworked the bid because if they didn’t get the trusses, they’d also lose the $15,000 lumber package. Or as the lumber salesman said after the new bid, “Hey, don’t look so glum, we got the order didn’t we!”

Chapter V

The Problem

Now the pace accelerated. Truss engineering and layout placement plans – incorporating the changes recommended by the estimator – were approved by the builder and in a short time trusses began arriving at the site. But when they began to set the trusses, it was obvious something wasn’t right in the girder area between the living room and den. This was where the builder wanted that special vaulted ceiling effect and when he found out that something was amiss, he called the truss people, screaming bloody murder. “You built the trusses wrong!”

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #53

Knowing there was no way to resolve this on the phone, the truss plant manager rushed to the site where he spotted the problem right away. One of the changes the estimator had recommended to the architect – to move a support three inches – hadn’t been made, so the girder couldn’t be set according to the layout. This wasn’t going to be an easy fix. “Sure, two more plies of the girder would take up the slack so the trusses on one side would fit okay. But that would make the trusses on the other side of the girder three inches too long.” That meant a repair design so the three inches could be lopped off the trusses on that side. No fun, but the truss people did the best they could – especially with the builder hovering over every move – and had the rework done in a couple of days.

Chapter VI The Payoff At last, the house was completed and the builder was pleased. He had all the features and effects he wanted, and he basked in the many compliments he received for the beautiful house. He congratulated the architect on his design and suggested they get right to work on another. But there were no “thank yous” for the truss plant. Oh no, they were the ones who built the trusses wrong and held up the job two days. What’s more, the builder doesn’t want to pay for the two plies, the engineering repair design, nor the repairs themselves. “I’m certainly not going to use that truss supplier again!” The salesman – who really didn’t know enough about trusses himself – was mad at the truss plant people too, because they lost him a good customer and he always takes the customer’s side. And the architect, whose main contribution had been the note: “Truss by Mfg.,” was oblivious to the entire proceedings. I’m sure you won’t be surprised to learn that after the highly competitive bidding and all the complications, the truss plant ended up losing money on the job.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Equip your customers for faster framing.

Introducing the Simpson Strong-Tie ® EasyFrame automated marking system. A combination saw and printer, EasyFrame cuts detailed wall panel framing members that are pre-marked for fast, accurate assembly. Designed for efficiency, EasyFrame prints framing plans directly onto lumber, including locations of boards, connectors, wiring and more. It can be paired with a manual or automated saw, and features a blade enclosure for safety. Powerful software also lets you ensure precision and optimize material use. EasyFrame is supported by our installation and onboarding services, training and technical expertise. It’s a smart way to equip customers for wall panel jobs while setting your business apart. Add EasyFrame to your lumber sales area. To learn more, visit easyframesaw.com or call (800) 999-5099.

LBM Solutions | Products, Software and Service for Smarter Building

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #55

Adverti$$er

SAWS

Pricteion! c e R du

2012 Vista "Angle Boss" Saw with 20' TigerStop • 2012 Vista Model M-20 AutoSet Cut-Off Saw • 0 to 75 Degree Left & Right Blade Rotation • 10 HP/460 Volt Motor with 20" Blade • 10' Infeed Roller Conveyor & 20' Outfeed Roller Conveyor • 2012 TigerStop (250" Cut Length) • TigerStop Software Version 5.30 • Excludes Dust Collector • Video available upon request • Price in US Dollars $18,880 NOW $17,000 FOB MB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

NEW!

NEW! Safety Speed Manufacturing Model 7400 XL Panel Saw Safety Speed Manufacturing, model 7400 XL*, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 1/8" maximum thickness, accuracy within 0.005 inches, 13 foot long welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include digital readouts for vertical cuts, automated length measuring, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00). $14,862 (Base) FOB MN. Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Safety Speed Cut Model 7000 Panel Saw Safety Speed Manufacturing model 7000, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 inch maximum thickness, accuracy within 1/64th of an inch, 10 foot welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include lower frame extensions, digital readouts, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00). $10,899 Base, FOB MN.

765-751-9990

www.woodtechsystems.com

Equipment Wanted! Saws • Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters

Truss Equipment • Roller Gantry & Hydraulic Press Systems • Finish Rollers • Truss Stackers • Floor Truss Machines • Lumber Splicers • Jack Tables • C-Clamp Presses

Trucks & Trailers

• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers

Modular Equipment • Pacific Automation or MiTek Mobile Home Press

Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment Operational, Needs Work, and Parts Only equipment will be considered!

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

! W E N FOB Quebec New ASI Radial Arm Saw with Length/Angle Automation • New saw design with double slide • minimizing footprint • Roller slide reducing risks of injury by • lowering the effort pulling the saw • Hybrid aluminum-steel construction • combining the robustness of steel for the • frame with the lightness of aluminum • • for the moving head • High resistance powder coat paint • surface finish • •

Blade travel adjusts automatically depending on the saw angle Saw arbor type 5 HP motor with integrated mechanical brake (575 Volts – 3 phases) Angles from 10° to 110° Head overall travel length of 26in 18in saw blade 5.5in cutting height Complete « wrap-around » blade guard 4in dust collector connection

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

“Over the years Alpine ensured our quality and production kept improving. Working with Alpine has been a 22 year friendship as well as a partnership!” — Roy Bedient Manager/ Production Manager, Warman Truss

Alpine has it all— the right equipment, user-friendly software and dependable hardware to improve your teams efficiency. Alpine delivers the complete package for success—including comprehensive support and service that sets us apart within our industry. Ask those who know. They’ll tell you about the people at Alpine who make a difference.

BUILD MORE. alpineitw.com | 800.521.9790

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #57

SAWS

Pricteion! c e R du

Pricteion! c Redu

MANUFACTURERS’

REPRESENTATIVES

NEW!

Used Hain Quick Rafter Cutter • Reconditioned in December 2020 • Board Sizes: 2x4 and 2x6 • Motors: Two 1 HP / 220 Volt or 440 Volt / 3 Phase • Saw Blades: 7 1/4" Carbide Tipped (set at 45 degrees) • Angle Adjustment: Manual Rotation with Air Brake • Air Supply: 90 PSI • Carriage: Steel Rails with Steel Dual V Rollers • Pedestal: 3/16" Formed Steel • Saw Housing: 1/2" Billet Aluminum • Covers: 10 Gauge (1/8" thick) Steel • Fully Enclosed for Safety $12,500 NOW $9,900 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2008 Alpine ALS 286A Linear Saw • Servo Controlled Linear Saw • Touch Screen Computer • Automated Infeed Deck • Infeed/Outfeed Roller Table • Ink Jet Printer (does not work) • 230 Volt / 3 Phase • Excludes: Outfeed Queue Rollers & Waste Conveyor $29,900 NOW $14,900 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Monet FWA 500 CA Automated Floor Web Saw In answer to the demands of high-volume customers comes the Monet DeSauw FWA 500 CA (Automated Controls) floor web saw. The 500 CA is perfect for component manufacturers who routinely run floor trusses in high volumes with variable web geometry. Another primary feature is enhanced safety through automation which eliminates the need to open the saw motor cabinets other than for periodic service. The 500 CA includes automation for all blades, including the fixed cut-off blade for minimal waste. Lumber infeed speed is variable up to sixty (60) boards per minute, while the powered carriage utilizes rack and pinion drive with airlock for set accuracy throughout the production run. Your operator will easily download batches to the 500 CA saw from your design software via an ethernet connection to a MS Windows 10 industrial PC with a 17″ monitor housed in a stand-alone console. If you frequently batch floor web cutting, and if enhanced safety with increased productivity are a concern, then an automated Monet FWA 500 CA may be the right selection for you. More information click Here

765-751-9990

Price based on configuration.

www.woodtechsystems.com

Work Smarter

2 Seconds That's all the time it takes

to drill studs for running Romex or other electrical wire in the wall panels

Motor: Heavy Duty 5 HP - 3 phase - 220v or 440 v (Please specify when ordering) Motor carriage bearing and spindle assembly mounted on Blanchard ground steel plate Lineal motion is hardened and ground V bearings and rails Block Sizes: 2 x 4 through 2 x 12 infinite height setting to center Air Supply: 100 psi 10 CFM Drills: 2 wing 3/4'” Carbide Tipped can accommodate smaller or larger Spindles: Alloy Steel polished and ground precision shafting Frame: 2" Steel With Powder Coat Finish Covers: 10 Gauge (1/8" Thick) Aluminum removable Dimensions: Height - 60 inches, Width - 33 inches, Depth - 33 inches Shipping weight: 750 lbs. - (Including crate) MADE IN AMERICA BY AMERICANS

See the Stud Driller in action! Go to https://youtu.be/AnODX5vPesE for a demonstration

530-295-8068 • www.thehaincompany.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Reliable automated machinery, built to last for generations!

“The equipment is extremely durable to stand up to the beating it takes in a truss plant”. Jackie Crutcher - Manager, Wilson Lumber

Get in touch today and find out how our machinery can benefit your plant! E sales@spida.com

T +1 866 647 7771

spida.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #59

Adverti$$er

SAWS

NEW!

Pricteion! c e R du 2003 Koskovich Auto Omni Component Saw • 5 Blade Automated Component Saw • Cuts 2x3 through 2x12 from 11" to 20'-0" • Computer, Enclosure & Stand • Waste Conveyor (under saw) • Excludes Incline Waste Conveyor (adjacent to saw) • Video available upon request • Add $12,500 for 6 Chain Live Deck $16,500 NOW $14,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com

$15,399 Base FOB MN

Used - Alpine Jack Rafter Cutter Parts Machine $500 – Make Offer Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Safety Speed Manufacturing Model 7400 XL Panel Saw Safety Speed Manufacturing, model 7400 XL*, vertical panel saw, 3 HP induction motor, 64 inch crosscut, 2 1/8" maximum thickness, accuracy within 0.005 inches, 13 foot long welded steel frame with integrated stand and linear V-guides, enclosed counterweight system, adjustable vertical and horizontal rules. Quick changes from vertical to horizontal cutting. Includes machined aluminum material rollers, hold down bar, wheels, quick stop gauges and material hold downs. Dust collection ready. Options available include digital readouts for vertical cuts, automated length measuring, laser guide, stop bar, vacuum and midway fence. 208-230/460 volt, 3 phase electrical (208-230 single phase, 2 HP power optional +$100.00).

765-751-9990

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

www.woodtechsystems.com

STANDARD TRUSS TRAILERS 40’, 48’ & 53’ sizes available

2 YEAR WARRANTY

ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS

Presents

Truss Tales

VALUE PACKAGED WITH PIN LOCKS, LOAD CONTROL, LED LIGHTS, STROBE LIGHTS & MORE!

Stories and posts on the truss and components industry BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.

Let us know if you would like to contribute to this online forum

Read TrussTales PHONE: 800-289-5627

FOR OVER 20 YEARS

Scan the QR Code to take you directly to our website. For more information or to request a quote Call or Email: 1-800-237-5161 sales@precisionequipmfg.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Automated Plate Picking 16 Truss Plate Hoppers per 8ft L x 6ft W Rack Up to 5 Racks for 80 Truss Plate SKUs Plates Dispensed in Collated Layers by Truss (one truss per bin) or One Bin per Joint 4ft x 6ft Wide Control Rack with Bin Feeder, Touchscreen, Printer and Custom Outfeed

Plate Hopper Specs Minimum 1.5” x 3” plates Maximum 12” x 18” plates 16, 18 and 20 gauge plates Load 100 tooth-to-tooth Plate Pairs per Hopper Stock more SKUs And Eliminate Overplating

F1 Pit Stop Each Truss

Build More Trusses Faster On Your Million Dollar Tables Distribute Truss Plates Around Every Truss Build Table, Like Dealing Cards Speed Up Truss Build Crews, and Ensure Quality Automate Plate Picking, Sorting, and Distribution with That’s How You Feed The Beast!

Contact Edmond Lim Edmond to Feed the Contact LimBeast! to Feed the Beast! (416) 888-4457 Edmond.Lim@LimTekSolutions.com Edmond.Lim@LimTekSolutions.co

www.LimTekSolutions.com www.LimTekSolutions.com

6021 1019 6021Yonge YongeSt, St,Unit Unit Toronto, ON, M2M Toronto, ON,3W2 1019

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #61

New Monet DeSawyer 2000 Component Saw

! W

NE $355,000 Location: MO

New, Monet DeSawyer 2000, computerized, five-bladed component saw, sets up in 15 to 17 seconds, can run in manual mode, downloads projects from a network or manually using display screen controls. Features all powered movements, cuts from 15" 90/90 cuts to 20 foot length, 2 x 3" to 2 x 12" lumber depths and internal brakes are standard. Options include enhanced servo controls featuring autocalibration, catcher's display and either shaker or belt scrap conveyor and incline. 440 volt, 3 phase electrical. www.woodtechsystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #62

The OODA Loop and the New Reality of the Truss and Wall Panel Industry Todd Drummond

he OODA Loop, developed by U.S. Air Force Colonel John Boyd, stands for Observe, Orient, Decide, Act. While often discussed as a tactical framework, its real value lies at the organizational level. The OODA Loop describes how companies perceive reality, interpret information, make decisions, and execute under pressure. Few industries need this discipline more today than roof truss and wall panel component manufacturing (CM). The market is no longer slow or predictable, and it is no longer forgiving of flawed assumptions. Conditions change faster, customer expectations continue to rise, and capital decisions now carry consequences that compound over decades rather than years. In this environment, competitive advantage increasingly comes down to decision quality.

A Market That No Longer Tolerates Drift For decades, construction—and by extension CM—operated in relatively stable local markets. Relationships mattered, and inefficiencies were often tolerated because the environment allowed them to persist. That environment no longer exists. Today’s market is shaped by consolidation, private equity ownership, regional and national builders, labor volatility, compressed schedules, and rising expectations. At the same time, commodification is accelerating as differentiation erodes, placing sustained pressure on margins. CM operators are now forced into shorter decision cycles, whether they are prepared or not. This shift has also pulled LBM suppliers deeper into CM. Many are entering manufacturing with strong balance sheets and operational confidence, but often with a distribution-oriented mindset. Tools and assumptions that work well in retail and supply chains do not always translate cleanly into production environments.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #63

Component manufacturing can be a genuine cash-generation engine for an LBM when it is structured and managed correctly. Outcomes, however, tend to fall into one of two extremes. CM becomes either one of the most profitable and strategically valuable parts of the organization—or a barely tolerated operational anchor. The difference is rarely market demand. More often, it stems from attempting to run a manufacturing business with a retail LBM mindset, without fully understanding manufacturing constraints, labor dynamics, capital intensity, and system design requirements. Once executed, these outcomes are difficult to reverse. Manufacturing is not simply material flow. It is a system of constraints, variability, sequencing, and recovery. Early decisions around buildings, equipment, and layout—when based on incomplete system understanding—can lock organizations into congestion, waste, and constrained throughput for decades. TDC has seen many facilities where what appeared clean and efficient during planning later revealed chronic bottlenecks, unnecessary handling, and limited flexibility. In many cases, vendors operated within the scope defined by the customer, limiting their ability to challenge assumptions even when foreseeable risks existed. The result is rarely intent, but a decision process that allows long-term consequences to go unchallenged.

Observe: Where Reality Is Commonly Missed The first step in the OODA Loop is Observe, and it is where many organizations fall behind. Observation is not reviewing financials or reacting to yesterday’s problems. It is understanding how the entire operation functions as a system. In CM, sales, design, manufacturing, and administrative functions must work in alignment to produce consistent outcomes. Too often, performance challenges are addressed almost exclusively within manufacturing, even when their root causes originate elsewhere. Design variability, incomplete sales information, poor handoffs, scheduling instability, and administrative delays all place strain on production when they are not addressed holistically. Manufacturing output is frequently a reflection of upstream decisions. When alignment breaks down, manufacturing is forced into constant recovery mode, degrading throughput, quality, and morale. Another common blind spot appears in workforce stability and skill development. Weak employee management systems—unclear expectations, inconsistent supervision, limited training pathways, and reactive hiring—often lead to frequent vacancies and a workforce dominated by underprepared labor. From an administrative perspective, these challenges are frequently misunderstood due to cognitive bias. Turnover is treated as a labor market issue rather than a system design problem, despite its predictable downstream impact on throughput and quality. In response, organizations often turn to automation—particularly robotics—to stabilize output or reduce reliance on people. Automation is frequently used to compensate for unresolved management and workforce design issues rather than addressing root causes.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #64

During the discovery and decision process, CM leadership teams often place significant weight on vendor recommendations. These recommendations are familiar, well-documented, and easy to justify internally. Vendors themselves often walk a delicate line between meeting customer expectations and pushing back on decisions that may create long-term constraints. The result is a decision process that can unintentionally narrow the range of options considered and overlook broader system-level alternatives. Rather than correcting upstream contributors, organizations frequently search for downstream remedies. Most often, that remedy is automation.

The Automation Mirage Automation—particularly advanced robotic automation— has been positioned as a response to labor challenges and margin pressure in CM. Results, however, have been mixed. In many operations, advanced robotics introduce rigidity, complexity, and recovery risk that conflict with the inherent variability of CM. Shifts in product mix, design requirements, material consistency, and demand quickly expose limitations that were not apparent during evaluation. The recent failure of House of Design’s robotic system illustrates this reality. It was more than a financial shortcoming; the system did not perform anywhere near the level implied by its marketing. TDC was surprised by how poorly it performed relative to expectations. While some robotic systems do work in narrowly defined applications, their effective use cases are far more limited than most organizations assume. This does not mean that robotics lack value. In certain situations, robotics can enhance specific processes. In many others, simpler solutions—such as properly designed conveyors or flexible carts—provide greater adaptability with less long-term risk. When automation underperforms, the causes are often visible early but discounted while projected labor savings dominate the discussion. Broader system impacts—throughput stability, recovery time, and management burden—tend to receive less attention. What consistently delivers results are fundamentals: material flow discipline, layout optimization, constraint management, labor balance, and process standardization. These approaches may lack the appeal of advanced robotics, but they offer greater flexibility, scale more effectively as needs change, and deliver more stable throughput with more predictable margins. Automation is not inherently valuable. Appropriate automation is.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #65

Orient, Decide, Act: Completing the Loop Orientation is the most critical—and most misunderstood—element of the OODA Loop. It determines how organizations interpret what they observe and which options are considered viable. Orientation is shaped by experience, incentives, organizational history, and risk tolerance. When orientation is incomplete, even accurate observations can lead to flawed decisions. In CM, orientation is often influenced by what feels familiar or defensible rather than what reflects operational reality. Prior investments, legacy processes, and vendor narratives shape how problems are framed. Over time, this creates blind spots. Leaders may see the data clearly but still interpret it through assumptions that no longer hold. When orientation is weak, organizations address symptoms rather than constraints. Labor shortages, schedule pressure, or margin erosion trigger actions that feel decisive but fail to resolve underlying system issues. The result is motion without progress. When orientation is disciplined, fewer decisions are required. Problems are defined more accurately, and leaders gain clarity about what to pursue—and what to avoid. Decision speed improves not by bypassing governance, but by reducing ambiguity. Decision-making then becomes a matter of alignment rather than debate. Strong decisions separate operational reality from assumptions and consider how choices in sales, design, workforce practices, and capital investments interact across the system. Most organizations are not short on data; they are constrained by decision processes designed to reduce perceived risk rather than maximize long-term performance. Execution reveals whether orientation and decisions were sound. When execution struggles, attention often shifts to labor or supervision. While those factors matter, recurring execution challenges usually trace back to system design—unclear expectations, misaligned incentives, or decisions made without full operational context. In CM, execution is unforgiving. Poorly aligned decisions surface quickly as missed schedules, rework, congestion, and unstable throughput. When systems are well designed, average teams perform well. When systems are poorly designed, even strong teams struggle. If execution is consistently difficult, motivation is rarely the issue. System design is. This is why disciplined operators outperform over time. They invest effort upstream—clarifying orientation and aligning decisions—so execution becomes repeatable rather than heroic. In an increasingly commoditized market, this discipline is a primary source of advantage.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #66

Why Disciplined Operators Win—and How TDC Helps Consolidation does not eliminate opportunity. It raises expectations. Independent CM operators that apply disciplined decision-making gain real advantages: faster response times, better capital allocation, stronger pricing discipline, and higher throughput with less complexity. TDC helps leadership teams improve how they observe, orient, decide, and act—without vendor bias or internal politics. By working across sales, design, manufacturing, and administrative processes, TDC identifies where decision frameworks constrain performance and provides practical, system-level corrections. TDC has repeatedly seen substantial capital deployed in ways that introduced avoidable constraints. In most cases, the issues were evident early in the process. Had options been evaluated more broadly before commitments were made, outcomes would have been materially different. The objective is simple: slow decisions just enough to improve judgment, then execute with confidence.

The Bottom Line CM is changing faster than many are willing to admit. Those who succeed will not necessarily be the largest or the most automated, but the most disciplined decision-makers. The OODA Loop is not theory. It is a practical framework for competing—and winning—in a consolidating market. Working with TDC, you will achieve honest insight and real results. There is no better value than TDC for getting the best ROI for professional consulting services. TDC is your best source for learning about proven and practical lean manufacturing best practices combined with industrial engineering principles to keep your company at the leading edge of competitiveness. Cost savings and net profit gains that usually take months or years can be accomplished in weeks or months with TDC. No one is better at providing your team with proven results for good employee practices, pricing, truss labor estimation, and so many other best-in-class practices. All areas are addressed, not just manufacturing. Please do not take my word about TDC’s services, though. Read the public testimonials from many current and past clients with decades of expertise and experience. Website: www.todd-drummond.com • Phone (USA): 603-748-1051 E-mail: todd@todd-drummond.com • Copyrights © 2026

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

ON THE ROAD TO GREATER ACCURACY AND PRODUCTIVITY, CONSIDER THIS A GREEN LIGHT. To see meaningful labor savings, quality improvement and production gains, SL Lasers with their easy-to-see green light are nothing short of illuminating. They enhance worker accuracy and productivity, regardless of experience or primary language. They can reduce tedious setup time by up to 70%. No complex training or costly service agreements are required. And SL Lasers integrate seamlessly with any component design software and are quickly installed over existing equipment.

We’ve been trailblazers in wood component laser projection since its very beginning, and we’re still delivering more rapid ROI for roof truss, wall and floor panel producers every day. Contact our enlightening team at Wood Tech Systems to see how SL Laser can deliver for you.

765-751-9990 www.woodtechsystems.com ProDirector7, the world's fastest laser, is now ever faster and more accurate. Images move much smoother from this new, compact design for all wood component applications. Faster and brighter results and even greater productivity.

Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.

IT’S NOT ONLY SMART AND INSPIRED, BUT LITERALLY UPLIFTING. Stacking wall panels at the end of your production line can be a real labor-intensive and safety-challenging task. But it doesn’t have to be now, thanks to ProStack. This innovative wall panel stacker literally stacks from the bottom up, reducing awkward overhead lifting & placement, and the risk of head injury. Plus, ProStack frees up at least one worker to return more productively to your core task—building wall panels. Enhanced worker safety and productivity is what ProStack is all about.

Setup and installation is easy too, without the need for complex training or disruption to workflow. So, free up your team to do what they do best, and you need to do most, and let ProStack stack your wall panels instead. Contact us to learn more today. For a ProStack demonstration video, scan the QR code below.

ProStack

By: DAK Automation

765-751-9990 www.woodtechsystems.com

Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #69

Adverti$$er

Prices good through January 2026

NEW

PRECISION EQUIPMENT TRUSS TRAILER MANUFACTURING

IN-STOCK Truss Trailers SALE

2002 Monet B500 5-Blade Component Saw $54,908 NOW $48,900 FOB NC

THESE TRAILERS ARE READY TO GO! 1

Does NOT INCLUDE FET or Freight ² DOES NOT include Freight

EXTENDABLE TRUSS TRAILERS (2) - 38’-53’ Includes FREE Headache Rack & Large Toolbox - $65,6701 (4) - 42’-60’ Includes FREE Headache Rack & Large Toolbox - $68, 9701

2002 Monet B500 five-blade component saw – Single Sided Setup includes digital readouts, push-button movement controls for angles, manual movement for length, mechanical backup counters, (1) 30″ diameter blade, (2) 18″ diameter blades, (2) 16″ diameter blades, powered chain infeed with upper hold-downs and shaker pan waste conveyor. Cuts angles from 8 to 115 degree angles. Minimum 90/90 cut is 10 inches and shortest angle cut is 18 inches. Cuts 2×4 through 2×12 lumber up to 20 feet in length. Includes horizontal shaker-pan waste conveyor, spare set of blades, any available spare parts. 480 V, 3 Ph, 100 Amp electrical.

765-751-9990

www.woodtechsystems.com

50’-70’ - (T-1347) Includes FREE Headache Rack & Large Toolbox - $76,7001 50’-70’ - (T-1346) With Lift Axle & FREE Headache Rack & Large Toolbox - $79,5871 50’-70’ - (T-1377) FREE Headache Rack & Large Toolbox - $76,700 1 50’-70’ - (T-1411) Includes FREE Headache Rack Large & Toolbox - $76,700 50’-70’ - (T-1412) Includes FREE Headache Rack & Large Toolbox - $76,700

53’-80’ EXTENDABLE TRUSS TRAILER (T-1420)

Fitzgerald Group, LLC

Lift Axle, FREE Toolbox and Headache Rack - $81,3411

a blending of excellent services and products, with answers that work...!© Not producing the results you need or want – getting conflicting info about what to do and the equipment and the systems you may need?

Before you Buy - Ask yourself – do I need a salesman or a guide? If you want an Independent Guide that has your bottom-line results as the #1 priority, Call Me. If the salesman will do - we'll talk later... Also, don't let Financing Deals influence your best solution. FitzGroup can arrange – Zero down & No payments for 90 Days! Please be assured that your investment with any of our selected partners will not cost one penny more with the Fitzgerald Group as your purchasing contact. In addition, you will receive the full advantage of our Partner Relationships and Services NOT offered elsewhere.

GOOSENECK TRUSS TRAILERS

32’ Gooseneck (T-1381) - FREE Top Roller - $49,485² 32’ Gooseneck (T-1382) - FREE Top Roller - $49,485² 36’ Gooseneck (T-1384) 12K Axles, FREE Top Roller - $51,823² 36’ Gooseneck (T-1385) FREE Top Roller - $50,515² All of our Trailers come with a 2 Year Warranty and are custom built. We use blast prep for our powder coat prime and paint system, air-ride suspension and we now offer Galvanized Rollers as an option. We build 38’-53’, 42’-60’, 50’-70’ and 53’-80’ Extendable Truss Trailers, 26’, 32’ and 36’ Gooseneck Truss Trailers (Split Truss Available as well on Goosenecks) and 40’, 48’, and 53’ Standard Truss Trailers.

You Can Truss our Truss Trailers!

Quality American Made Truss Trailers

Call Bryan Shinn today to purchase one of the trailers listed above or to get a Quote and have us build a NEW Truss Trailer for you call or email -

Bryan Shinn - Sales Manager 701-941-2017 or 1-800-237-5161 bryan.shinn@precisionequipmfg.com

RFitzgerald@FitzGroup.com 719.528.5445 PHONE: 800-289-5627

www.FitzGroup.com Read/Subscribe online at www.componentadvertiser.com

sales@precisionequipmfg.com FAX: 800-524-4982

OPTIMIZE WITH THE INNOVATORS REAL-TIME OPTIMIZATION IS HERE

Vekta’s innovative Real-Time Optimization software leverages decades of technology advancements and intelligent algorithm development to provide unparalleled flexibility and control of your cutting and production planning. RTO is designed specifically to make considerable improvements to operational and material efficiencies in plants with a direct delivery system, but can also benefit smaller setups as well.

KEY FEATURES: •

SIMULTANEOUS OPTIMIZATION – instantly optimize multiple jobs across assembly stations, minimizing waste.

•

REAL-TIME ADJUSTMENTS – adapt cutting volumes and flow to meet dynamic point-of-use demand.

•

DECENTRALIZED INTERFACE – empower your operators with the ability to schedule zero-disruption recuts directly from the point-of-use. Load, adjust, reorder and reroute in real-time from any network device.

•

MULTI-SAW MANAGEMENT – efficient single operator control of multiple saws, reducing labor requirements and costs.

•

CONTINUOUS CUTTING LISTS – eliminate end-of-file waste through seamless job transitions, optimizing material usage.

Simply put, RTO is a comprehensive solution to provide significant improvements in productivity and waste reduction.

info@vektausa.com I vektausa.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #71

Adverti$$er

$224,997 FOB OR

2020 Alpine ALS 4.0 Linear Saw

2020 Alpine ALS 4.0 linear feed saw. Cuts wall and truss parts from lumber depths 2×4″ through 14″ deep, thicknesses from 1.38″ to 1.77″ and board lengths from 36″ to 24 feet. Cuts bevels from 90 to 25 degrees, 60”+ scarf cuts and optimizes material. Includes 24-foot-long infeed conveyor and 15-foot outfeed conveyor, touchscreen monitor, Matthews Inkjet printer (one 3 ½” face), dust port and under-saw scrap conveyor. All servo-controlled functions, 7.5 hp motor with 20” carbide tipped blade. Includes spare blade, operator’s manual and available standard spare parts kit from OEM. 230v, 3 phase, 100 Amp electrical required. Includes step-down transformer. 100 PSI at 25 CFM air required. Weight of saw cabinet is 3,500 lbs. OEM installation available at an additional charge.

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #72

Adverti$$er

NEW!

New Monet DeSawyer ESC (Servo Controlled) Component Saw Monet DeSauw model Desawyer ESC enhanced servo-controlled ( ESC) component saw with touch screen user interface with backup mechanical controls. Includes three operating modes: Auto (download setups from LAN or USB), Semi-auto (touch screen setup entry), and Manual (backup push-button switches for powering all movements). Includes over-travel protection, comprehensive setup screens, auto sequencing, auto-calibration and pneumatic brakes on all five () blades. One (1) 30” blade and four (4) 16” blades. Manual cut limits are 18” min., 11” min. square edge blocks, 20’ max cut. Belt under-saw waste conveyor. Voltage: 480 volt/3 phase/60 Amp. Air: 50 PSI at 5 CFM. One-year warranty included. Can be paired with a model PD-6 lumber feed system at an additional cost. Heavy duty 80 RIV chain feed system. 16’ wide x 20’ long x 36” deck height. Transfers 3’ to 20’ lumber. Includes auto-feed control, foot pedal override, forward & reverse, variable speed control with HD double-bearing construction. Other additional-cost options include, inkjet marking, label printing, backside screen display, spare blades and incline scrap conveyor.

$386,000 FOB MO

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #73

Adverti$$er

SAWS

! W E

Pricteion! c e R du 2006 Alpine Speed Rafter Cutter Simplified compound cutting for hip, valley and jack rafters (double & single compound cuts) • Two Worm-Drive Circular Saws (110 Volt / 30 Amps) • Saw Turntable (for angle cutting) • Saw Carriage (for up to 45 degree bevel cutting) • Infeed & Outfeed Roller Conveyor with Stands $4,900 NOW $4,250 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

•

Used - Metra Cut Radial Arm Saw (2x) Parts Machine $500 – Make Offer Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

Used - 2005 Model 305 Infeed Conveyor Designed for use with all component saws. To include: Soft Start ~ Soft Stop Inverter System. Programmable load sensing; Overload / Jamb sensing shut down feature. Gear motor providing conveyor speed of 36' per minute. Forward and reversing controls for location at both ends of conveyor unit. Material capacity range - 4' through 24' lumber. Chain deck pedestals 20' long with cross bracing. Staging area at the saw independent of the live deck system. 30,000lb. Deck capacity. Call for pricing Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com PHONE: 800-289-5627

Safety Speed Manufacturing Gypsum Cutter Lose the dust and noise with the Safety Speed model VGC 515 cartridge cutting system for processing material such as DensGlass®, or other gypsum products. Easily process full sheets of gypsum wall panel sheathing of material in widths up to 64″. Fully portable, and with NO power or air required the VGC 515 is dust and noise free to easily score gypsum material that rolls effortlessly to an integral edge used for breaking of scored material. $6,399 FOB MN Wood Tech Systems 765-751-9990 www.woodtechsystems.com

019 Holz-Her Sector 1260 Vertical Panel Saw • 4.0 kW Motor with 10” Blade (2.36 cutting depth) • 230 Volt / 3 Phase • Cutting Length: 14’ / Cutting Height: • Automatic Mode: Plunge, Saw & Return with Variable Speed Control • Top & Bottom Sawing Beams with Pneumatic Arrest • Digital Horizontal Cutting with Motor-Driven Precision Adjustment • Digital Longitudinal Stop with Fine Adjustment • Pneumatic Support Grid • Dust Extraction Port • Like New Condition • A 2016 COIMA FI6000 Dust Collector is available at additonal expense FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

New SpeedWorx Automated Sheathing Station New SpeedWorx Automated Sheathing Station by Safety Speed Manufacturing- Reduce labor and operator fatigue by taking advantage of the SpeedWorx automated vertical panel saw. This one-person station cuts wood sheathing sheets up to 50-inches x 10-feet, and up to 2-inch thickness, using a fast 1-button cutting setup with CNC accuracy to 1/32 of an inch (0.03125″). The photos of raw materials illustrate the drastic reduction of scrap material thanks to implementing the Rogworx saw station. Visual user interface makes choosing the job and sheet cutting order easy to determine. Files are downloadable allowing for minimum waste. Saw station reads WBX file format (Alpine) or EHX file format (MiTek) or CSV files with manipulation. Automated sequencing of sheets provides optimum usage of each sheet. The cutting chamber changes from ri to cross-cutting automatically. All this in a very small machine footprint, so it can fit easily into your existing building. Visual user interface with standard ‘Auto Fill’ feature makes choosing the job and sheet cutting order easy to determine. System offers full optimization and sequence panel parts looking ahead through the job based on your specification. The cutting chamber changes from rip to cross-cutting automatically. All this in a 100 square foot footprint, approximately 25′ long x 4′ deep, so it can fit within existing facilities. Includes advanced dust collection. Integrated Printing for labeling parts is available as an option. 208-230V volts, 3-Phase, 25 Amp electrical required, 5 CFM at 100 PSI air required.

$143,500 (Base) FOB NM 765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #74

Adverti$$er

LOWER YOUR PLATE COSTS Switch to CH plates and get the Paragon Design Suite included for free

PLATES STARTING AT $1.79/LB

PARAGON INCLUDED

FREE CONVERSIONS

PERSONAL SUPPORT

Get Started in 3 Easy Steps 1. Send Us a Test Job to Convert

2. Test Converted Designs in Production

3. Complete Partnership Agreement

CH Questions contact Dan@chmachineinc.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com Paragon Questions: Contact Sethd@paragontruss.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

PA R A G O N

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #75

Finding the Common Chord

By The Paragon Team

ost people assume the hardest problems they deal with are theirs alone. That assumption quietly shapes how work gets done. You fix the issue in front of you, adjust a process, add another spreadsheet, or patch a handoff between design and production, then move on. Rarely do you pause to ask whether the shop down the road is wrestling with the same saw setup, the same data gap, or the same unanswered question about how systems should connect. While waiting at the gate to board our flight for BCMC, we struck up a conversation with a component manufacturer from nearby. Small talk quickly turned technical and within minutes we were deep into database structure, tooling decisions, and system design. Finally, someone who speaks our language and understands the complexities of our industry. We had planned to record a few conversations at BCMC, but that conversation made us rethink our approach. The focus did not need to be on Paragon. It needed to be on the conversations already happening, often quietly, across the component industry. Not panels. Not presentations. Just honest discussions that reveal shared ideas, recurring friction points, and emerging possibilities that many shops are navigating on their own. That realization became Common Chord. Curiosity has always been part of how we work. We spend a lot of time asking why truss design feels fragmented, why data so often stops at system boundaries, and why so many solutions rely on workarounds passed down through people instead of systems. As problem solvers, it is easy to focus on fixing the next thing and overlook the value of stepping back to listen. What stood out most was how consistent the themes were. Component manufacturers are relentless problem solvers, but that focus can unintentionally keep insights siloed. Fragmented systems. Closed data. Manual reentry. Processes that work, but only because someone knows how to make them work. When insights stay local, learning stays local. When experiences are shared, patterns become easier to see and better solutions come into reach. The Common Chord conversations are a reminder that across different roles, tools, and shops, there is shared ground. A shared intent to build better. Shared conversations can help an industry recognize what it has in common and move forward with more clarity. Most of the Common Chord conversations are now published on our blog, and we plan to keep going. The goal is to create space for people who are curious about innovation to think out loud, compare experiences, and learn from one another. What idea, insight, or experiment are you working on that others in the industry could learn from? PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #76

Adverti$$er

2016 Alpine AutoMill HP Component Saw Alpine AutoMill HP, model 349C component saw. Servo controlled computerized saw sets up in 2 to 19 seconds and downloads from a network, or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files), semi-automated control (via touch-screen input) or manual mode. It has (23) axes of automated movement, enhanced diagnostics, and auto management reporting. The HP cuts from 2′-6″ to 20′-0″ long material in size range from 2×3″ through 2×12″, and 4-angle floor webs from 2′-0″. Includes [3] 18″, [1] 20″ and [1] 30″ blades with air brakes, Windows 7 o/s and under-saw scrap conveyor. The Windows 7 o/s can be upgraded to a version of Windows 10 that will be supported until 2032, at an additional expense. Also includes over $8,000 in spare parts. 480 volt, 3 phase, 100 Amp electrical required. 90 PSI @ 69 SCFM air required.

$129,997 NOW $119,990 - FOB OR www.woodtechsystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #77

Adverti$$er

NEW!

B500 Monet Desauw 5 blade Component Saw New in 2022. Still in operation but will be available by the end of March 2026. Live deck and skate wheels not included. $149,000 FOB WI Call 563-235-7449

2015 Monet DeSawyer 2000 Component Saw 2015 Monet DeSawyer 2000, (non-servo) fiveblade, automated component saw using a touch screen interface and Windows 10 O/S for direct input. The DeSawyer 2K Can operate in automated or manual input mode. (1) 10 h.p., 30″ diameter blade with PAE setup & (4) 5 h.p. 16″ diameter blades with center line setup. Mechanical backup counters and scales, powered chain infeed with upper hold-downs, and shaker pan waste conveyor (no scrape incline). 16″ blades cut angles from 3º to 115º, 30″ blade from 3º to 100º . Minimum 90/90 cut is 10 inches and shortest 4-angle cut is 18 inches. Cuts 2×4 through 2×12 lumber up to 20 feet in length. 480 volt, 3 phase, 60 Amp electrical 90 psi air required. (Seller reserves the right to decline sale based on buyer’s regional trade area).

$119,000 FOB GA 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

New Monet FWA 500 Floor Web Saw

New Monet 5-head, floor truss web saw, cuts 4-angle, 4×2 floor truss webs from 13 inches and 90-90 blocks from 7 inches, to 4 foot long maximum length. Features 10-board magazine feed, powered, fixedquadrant angulation, manual carriage standard, scrap conveyor and cut-off blade. Options available for longer carriage length, incline scrap conveyor, and choice of shaker or belt scrap conveyor. 440 volt, 3 phase, 60 Amp electrical. 50 PSI air at 5 CFM required.

765-751-9990

$83,000 FOB MO www.woodtechsystems.com

Pricteion! c Redu

• 10 Each - Standard 20 Ton Track Mounted Heads with 10" x 10" Platens (refurbished in 2011) • 6 Each - 2011 Double 40 Ton Track Mounted Heads with 10" x 15" Platens • 2 Each - 2021 Double 40 Ton Track Mounted Heads with 10" x 15" Platens • 2 Each - 10 HP Two Stage Hydraulic Systems with Controls (230 Volt / 3 Phase) • Track System for 55' Scissor & Flat Bottom Trusses • 1 E a c h - P e a k H e a d Tr a c k (perpendicular to base line)

Clark Industries Multi-Head Roof Truss Pressing System • 2 Each - Movable Bottom Chord Tracks (to adjust for pitch) • 8 Each - Floating Tracks for Top Chord Head • Clamping Package: Peak, End Stop, Camber Stops & Air Clamps • Air & Hydraulic Manifolds with Quick Connectors for Heads • Pneumatic Pop-Up Skatewheel Ejectors (for truss removal) • 56' Powered Transfer Roller with Stands • 26 Each - 14' Powered & Idle Exiting Rollers with Stands

$89,900 NOW $75,900 FOB AR

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Before After

Mitek Roof Tracker III Added

Transform Your WizardPDS® Track On Floor Tables To Trackless

An EIS Trackless Upgrade eliminates the floor track, creating a clear workspace for easy assembly of trusses on your WizardPDS® tables. There is no need to remove or ship your tables anywhere; we can perform all the work right in your plant.

Your table, upgraded.

We bring the best together! Eide Integrated Systems, LLC

612-521-9193

www.eideintegratedsystems.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #79

Adverti$$er

TRUSS EQUIPMENT

Pricteion! c e R du

Pricteion! c e R du Baumeister Lumber Splicer • Vertical Hydraulic Press with 3"x 12" Platen Size • 2x3 and 2x4 Lumber Material (3" x 10" maximum plate size) • Magnetic Platens to hold plates in the correct position • Working Pressure: 1600 PSI • Dual press cycle activation for safety • 208, 240 or 480 Volt / 3 Phase (10 HP) • Video available upon request • Excludes: Infeed/Outfeed Roller Conveyor • Optional 2x6 Capacity (up to 16" long plate) Splicer is available $29,500 NOW $26,500 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Four Eagle Production Presses with Jig Table • (4) Eagle Production Presses (1 new in 2023, 2 with new pumps within the last 3 years, 1 with older Simplex motor) • (2) TP300 C-Clamps (Roof & Floor Trusses) • (2) TP600 C-Clamps (Extra Throat Depth for 2x8 & 2x10 Roof Trusses) • 25 Ton Cylinder • 5 1/4" x 6 1/4" Platen • 220 Volt / 1 Phase • Jig Table • (2) 40' Steel Beams • (4) Beam Trolleys $37,500 FOB CO Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Commercial Machinery Fabricators 12' Finish Roller • 12’ Long x 18” Diameter Rollers • Front and Rear Safety Bars • Adjustable Roller Height (1 1/2” and 3 1/2”) $14,900 NOW $13,900 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

EMSI Field Repair Press EMSI 10 Ton Field Repair Truss Press System. Complete with: 1/2 HP, 115 Volt, 50/60 Cycle Universal Motor – Operates at voltage as low as 60 volts. 10,000 PSI Portable Power Pack with Two Speed Operation – 200 cu in/min @ 0–200 psi, 20 cu in/min @ 200–10,000 psi and Externally Adjustable Relief Valve (unit weight 55 lbs.). C-Clamp Assembly with 8" Maximum Reach, 4" x 5" Pressing Platen (optional platen available for 4” x 2”). Independent 10 Ton Hydraulic Cylinder. 10’ Hydraulic Hose Assembly with Quick Disconnect Coupling. Handle with 24 Volt Remote Electrical Pendant. Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

1977 Joos Stand-alone Hydraulic Press 1977 Joos stand-alone hydraulic press, model HP-150, platen is 10-ft wide x 5-ft deep x 2-ft high. Used by seller to press RV trusses. 240 volt, 3 phase, 80 Amp electrical required. $9,995 FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2002 Krepl-Stroj End-eject Floor Truss Machine End-eject floor machine with floor finish roller press, 40-ft working length, builds 12″ to 24″ deep 4×2 floor trusses. Clamping is ontable air cylinders with toggle controls. Includes idler roll leading to floor finish press. Gantry press head has a 7 HP drive motor. Includes electrical panel and inverter installed in 2024. Needs safety bar repairs. Model RF2300. Made in the Czech Republic. Floor finish press, 12″ diameter rolls, 5 HP motor.

765-751-9990

$51,997 FOB NH

www.woodtechsystems.com

TRUSS EQUIPMENT

Klaisler Finish Roller Press Klaisler finish roller press, model #: TR21424, 14-ft final roller with 24″ diameter rolls, heavy-duty steel frame, continuous shaft supported by (4) baffles. Twin 5 HP drive systems (10 HP total), with single-safety bar, and chain / sprocket guards. 460v, 3 phase electrical required. Please review this video: $39,997 FOB KY Wood Tech Systems 765-751-9990 www.woodtechsystems.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Read/Subscribe online at www.componentadvertiser.com

New Wescana Floor Truss Finish Roller Press New Wescana floor finish roller press with push button controls, e-stop, (2) 24″ diameter rolls, continuous 4″ diameter shaft with baffles, 5 HP gear motor with brakes, 3.5″ diameter bearings, taper-lock sprockets, sealed flanged roller bearings, reversing magnetic starters, safety barrier and electric eye. Available in 3-ft, 4-ft and 6-ft throat widths. Speed 2-ft per second. Height to bottom roller 35″. 230/460/575 volt, 3 phase electrical choices. $46,620 FOB Alberta Wood Tech Systems 765-751-9990 www.woodtechsystems.com FAX: 800-524-4982

BCE-FGS INTRODUCING THE ALL NEW

SiDE EJECTiNG

FLOOR GANTRY SYSTEM

UP TO 40' LONG HEAVY DUTY TABLE TOP PRODUCE JOiSTS FROM 9.5"-24"

Element Equipment

a brand manufactured by GOW Group Inc. Your success is our priority. We believe in building strong partnerships with our clients, working hand in hand to understand your unique challenges and goals. We pride ourselves on delivering custom machinery solutions of the highest caliber.

Our Latest Installation Project

PROUDLY MADE

SCAN HERE OR CONTACT US FOR MORE iNFO 1 (800) 799-4711

info@element-equipment.ca

IN CANADA

www.element-equipment.ca

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #81

800-382-0329

2005 Pacific Automation Roof Gantry 14RT with Wizard Jigging • • • • • • •

14’ x 24” Diameter Gantry Roller (Model 14RT) 7 1/2 HP Motor (208 Volt / 3 Phase) 14’ x 64’ Steel Slotted Top Table with End Eject Rollers (Raised Track) Park Section and Uplift Ramp Section Wizard (GEN 1) Automated Jigging (32 Rails) Add $40,000 2005 Pacific Automation 14’ Finish Roller Prices are in US Dollars

$250,000 FOB Alberta Canada www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Cutting, Framing and Truss Solutions - We Do It All! We provide high quality precision machinery suitable for cutting and assembly of walls, roof trusses and floor trusses. All your needs are covered.

OVER 70 PRODUCTS

EXPERTISE & KNOWLEDGE

SERVICE & SUPPORT

If you’re wanting to increase productivity in your factory, then get in touch with us today. E sales@spida.com

T +1 866 647 7771

spida.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #83

“Serving the Component Industry Since 1996”

Now offering short term Working Capital Loans

Start smarter... Grow faster... Achieve more... Keep More of Your CASH Eliminate Yearly Financial Reporting

Low Fees Fixed Payment Programs No Additional Collateral

cvillella@acceptlease.com | www.acceptlease.com 894 Beaver Grade Road, Suite #304 - Moon Township, PA. 15108

Phone: 412-262-3225 Fax: 412-262-1154 TRUSS EQUIPMENT

Klaisler 15' Finish Roller • 15' Long x 24" Diameter Roller • New Motor and Laser Safety • 480 Volt / 3 Phase $32,900 FOB UT Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Hydro-Air GlideAway Truss Assembly System Hydraulic Power Unit ___HP / ___ Volt / 3 Phase 5 Base Press Pedestals, 2 Magnetic Press Pedestals & 1 Peak Press Pedestal Control Station Jig Hardware Steel Floor & Track $19,880 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The

Component Manufacturing dverti$er

Serving the Structurval Building Components Industry

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #84

Why the Future of the Truss Industry Belongs to Teams With Visibility By Kenneth Sewell

very truss manufacturer knows this moment. A job should be moving forward, but it isn’t. Sales thinks design has it. Design is waiting on information. Production is asking for answers. Someone opens a file only to realize it is outdated. Nobody feels negligent, yet nothing is moving. For years, this friction was tolerated. Today, it is a competitive liability. The truss industry is entering a new reality. Builders expect faster answers. Timelines are tighter. Teams are leaner. Visibility is no longer a nice-to-have. It is becoming the difference between winning work and watching it go elsewhere.

The Visibility Gap Holding Teams Back Most manufacturers do not struggle because their people are slow or unskilled. They struggle because their processes are invisible. Spreadsheets, inboxes, and shared drives were never designed to run a modern bid-to-build operation. They store information, but they do not show flow or ownership. The result is a visibility gap that quietly slows teams down.

Where Delays Really Begin Late bids and rework rarely start in design. They start earlier, during intake and estimating. In many shops, that stage still looks like this: •

Handoffs buried in long email threads

•

Updated plans saved in shared folders no one consistently checks

•

Estimates paused while someone searches for missing information

•

Designers unknowingly working from outdated files

•

Multiple versions of the same job circulating at the same time.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #85

Individually, these moments feel manageable. Collectively, they create late quotes and unpredictable schedules. Without clear ownership and status, inefficiency becomes part of the process. When intake and estimating become visible and structured, they unlock a level of speed and accuracy most shops have never reached.

Why Connected Teams Are Pulling Ahead Leading manufacturers are separating themselves, not by working harder, but by working with clarity. When processes are connected end to end, priorities are visible. Ownership is clear. Bottlenecks surface early. Teams spend less time searching for information and more time moving work forward. Builders experience faster answers, more reliable timelines, and fewer surprises. This is the gap Cadynce was built to close. Cadynce is not another place to store files or track tasks. It is a purpose-built platform designed around how truss manufacturers actually work. Every job, handoff, file, and decision lives in context, tied directly to the workflow. Visibility is designed into the process.

A Workforce That Demands Clarity The next generation of estimators and designers expects clear assignments, a single source of truth, visible status, and consistent handoffs. They do not expect to manage complex work through inboxes and spreadsheets. Manufacturers who embrace structure reduce burnout, accelerate onboarding, and retain stronger teams.

The New Standard for the Industry Manufacturers who thrive in the coming years will be able to answer these questions without hesitation: •

Where is this job right now?

•

Who owns the next step?

•

What changed since yesterday?

•

Are we still on schedule?

Visibility is not the finish line. It is the foundation that enables what comes next. The truss industry is not slowing down. The question is whether your process is ready. Cadynce believes the future belongs to teams who can see clearly. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

MAXIMIZE

ACCURACY, SAFETY, & PRODUCTIVITY INTRODUCING THE SPLICEMASTER 12... ...an innovative approach to producing longer truss members with enhanced strength and reliability.

• Unmatched Accuracy • Superior Safety • Maximized Productivity To learn more about the SpliceMaster 12, scan this code!

Visit www.wasserman-associates.com or call 402.761.2421 for more information! 2341 Shepard Road, Milford, NE 68405 PHONE 402.761.2421 | TOLL-FREE 800.382.0329 WWW.WASSERMAN-ASSOCIATES.COM

MANUFACTURED BY

Continued next page

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #87

Adverti$$er

NEW! $92,400 FOB MT

TruStance Pedestal Jig System The TruStance Pedestal Jig System was developed to solve the problems associated with pedestal jig systems, while retaining and enhancing all the advantages. The system features track mounted pedestals with a track and lockdown design, movable pedestals, and a roller lift assembly. The pedestal tops are 30″ above the floor, creating a comfortable working height. The ability to configure the system in a very small footprint makes it ideal for any size truss plant. It is designed to use with a ‘C-clamp’ type press. With the ability to install the interchangeable crossmembers and angle iron stops on both track mounted and movable pedestals, the system can be configured to meet the needs of even the most complicated truss designs. Movable pedestals can be moved and locked down efficiently; the 4″ thick steel base provides the weight needed to keep them in position. Bottom chord pedestals are installed on the steel track mounted to the floor. Pedestals are easy to move and rigidly lock into place with threaded rod locks. The optional air activated roller lift assembly raises the truss above the jig to be easily ejected. Its versatile design allows it to be configured for any set-up. TruStance recommends a (16) pedestal system for roof trusses to 60-ft in span. 120 volt, 1 phase, 20 Amp electrical required. 50 PSI air required.

www.woodtechsystems.com

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #89

Adverti$$er

TRUSS EQUIPMENT

Wescana Floor Truss Machine

JobLine.com, inc.

The

800-289-JOBS

TCS C-Clamp Presses & Unistrut Jig Table • (2) Truss Component Systems C-Clamp Presses with Beam Trolley • 10 Ton Cylinder with 6” x 7” Platen • 2 HP / 1 Phase Motor • (2) Overhead Steel Beams • 54’ Unistrut Jig Table • Pop-Up Rollers (2 at 12’, 2 at 6’) • Excludes Finish Roller $29,500 FOB OH Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Time To Hire? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com STRICTLY CONFIDENTIAL!

The

Component Manufacturing dverti$er

Serving the Structurval Building Components Industry

NEW!

Price based on configuration

New Wescana floor truss machine, available in side-eject or end-eject models. Builds floor truss depths from 12 inches to 26 inches, to 40-ft long. Features under-table cylinders powering the clamping system, built-in camber, truss flip arms, truss pop-ups, control valves for clamps, flip arms and pop-ups, with parking stations at each end of the table, and emergency shut-off bars on each side of the press head.

765-751-9990

www.woodtechsystems.com

NEW! Robbins "Super Torque " 15'-6" Finish Roller • 15’-6” x 24” Diameter Rollers • 10 HP Motor (480 Volt / 3 Phase) • Emergency Shut-Off Bars • Checked, Repaired &Painted in September 2025

$39,500 FOB AZ

800-382-0329 | www.wasserman-associates.com PHONE: 800-289-5627

NEW IDLE & POWERED 14' TRUSS CONVEYOR (AZ) • 14' Long x 4" or 5" (Inside Diameter) Schedule 40 Pipe • Tube Steel Stands (7" Height Adjustment - Height to be Specified) • 4 Bolt Flange Bearings • Idle and Motorized Rollers • 1/4 HP Motors (240/480 Volt-3 Phase) with Controls • 1" and 1 1/4" Cold Rolled 24" Shafts Baffled • 6 to 8 Week Delivery

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

DESIGN SOLUTIONS Elevate Your Wall Panel, Floor Truss or Roof Truss Manufacturing with 4Ward Design Solutions’

Precision Component Design Services!

When you work with us, you get:

Speed and Scalability Adjustable Hours No Need for Training Reduced Regulatory Burdens Reliable Timelines and best of all...

Great Designs!

DESIGN Excellence Extend your existing capabilities with 4Ward's design expertise. Without the hassle and expense of training your own designers, partnering with us guarantees that each wall panel, floor truss or roof truss will be designed for structural integrity and production and field efficiency. Achieve cost efficiency without compromising on excellence. Our costsensitive approach ensures maximum value for your investment. Leverage our expertise, ensuring every component is attentively designed for optimal performance and durability.

We understand that every component project is unique. At 4Ward, we create custom designs, tailored to your exact speciﬁcations. Contact us today for a complimentary consultation.

Contact Roger Wagner at Design@4WardConsult.com or 623-229-4151

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #91

Adverti$$er

TRUSS EQUIPMENT

Price based on configuration Building Components Manufacturing Industry

Job Board

NEW!

YourTurn Key Platform Post and Manage Multiple Jobs and Multiple Candidates New Application Notices and Internal Candidate Messaging Manage on Your Phone or Computer

For Additional Information

twm@Hiring-Zone.com Visit our website: www.Hiring-Zone.com

2023 2-Head 30 mW LAP Laser System Condition: As-Is, Where-Is Set of (2) 30 mW green Cad-Pro LAP Lasers. Includes mounting brackets, distribution box, projector cables, remote control, and all available system hardware and instructions. 30 mW lasers are better suited to Canadian facilities, but could work in a US location with some additional steps due to regulations. $39,890 FOB BC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

New Wescana Roof Finish Roller Press

New Wescana roof finish roller presses, available in either a 14ft or 16-ft throat models. Travel speed of 2-ft per second. Both models feature 24″ diameter steel rolls with 3 1/2″ diameter shafts with baffles, (2) 5-horsepower drive gear motors with controlled motor drive systems for starting and stopping, along with taperlock sprockets, sealed flange roller bearings and reversing magnetic starters.. Includes safety shutoff bars, electric eyes, amber running light, red reversing light with buzzer, and e-stop module. 240 / 480 /575 volt, 3 phase electrical required.

765-751-9990

The

www.woodtechsystems.com

JobLine.com

Truss Design Skills Evaluation

Measures 9 areas of Skills and Experience Compairs Results to National Averages Identify Strengths and Areas For Improvement theJobLine.com, inc. Company: Name: Tools: Notes

Available On-Line

Test Date:

JobLine Sample Candidate

National Average: Years of Experience

MiTek, Construction Master

National Average: Score as of 12/19/2019

Candidate Score:

05/15/20

84.4% 13.73

81.1%

Truss Design Skills Evaluation Version 8.0

$145 per Exam

100% 90%

NEW!

93% 88%

80%

87%

86%

84% 81%

86% 82%

81% 80%

79%

81%

82% 81%

74%

70%

(Volume Discounts Available)

60% 55%

50% 40% 30% 20%

Overall

Basic

Inter. Candidate

0-60% - 2.85 60-70% - 4.79 70-80% - 6.26 80-90% - 8.09 90-100% - 11.13

03:21 02:52 02:24 01:55 01:26 00:57 00:28 00:00

03:00

Truss

Math

Design

Layout

National Average

Score = Avg. Years Exp.

Speed

Time

Adv.

02:32

Years Exp. Ver 7.0

16.0

Blue = Candidate | Red = National Avg.

14.0 13.7

12.0 10.0 8.0 6.0

4.0 2.0 0.0

5.0

4.9 0.00 2.4

0.00

Test your design team to have a better understanding of individual strengths and areas for improvement. Use your team's results to measure potential new hires!

For Additional Information email: twm@thejobline.com PHONE: 800-289-5627

New Baumeister DuraPress 14' Finish Roller • 24” Diameter x 14’ Long Rollers (custom lengths available) • Removable Shaft Replacement in Rolls • Simplified Roll Height Adjustment

• • • •

10 HP Motor with Soft Start VFD 230-480 Volt / 3 Phase Front & Rear Emergency Shut Off Bar Integrated E-Stop System with Interlock

$79,880 FOB PA

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Component Warning Notice Tags An industry best practice to help component manufacturers inform installers about the safety risks associated with the handling and installation of trusses and components. SBCA has created the Component Warning Notice (CWN) to clearly and effectively share important installation information with a triangular approach.

2 The CWN Tag is applied to every truss and component, and directs installers to the website.

1 The CWN Website contains up-to-date warnings and guidance: componentwarningnotice.com.

3 The CWN Sheet is included in wood-based SBCA Jobsite Packages with key information.

Learn more about the Component Warning Notice at sbcacomponents.com/CWN

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #93

800-382-0329

2023 Wescana 14' x 84' Roller Gantry System • Trackless Gantry Roller Press Head • 14’ x 84’ Steel Slotted Top Tables with Skatewheel Ejectors • Two 5’ Park Sections • Transfer Conveyor • 480 Volt / 3 Phase • Excludes: Inside Powered Conveyor, 14’ Finish Roller, 60’ Outside Non-Powered Conveyor & SL Laser Projection System • Price in US Dollars

$289,000 FOB Manitoba www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

HUNDEGGER lnnovationen fur den Holzbau

HUNDEGGER

_,...,_,

We go beyond standard mechanization; we champion true

Automation. The Hundegger TD-II isn't just a saw-it's a

REVOLUTIONIZE YOUR TRUSS MANUFACTURING WITH THE HUNDEGGER TD-II

Don't get left behind. Invest in the future with true automation from Hundegger and see your business thrive.

om .

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #95

A 2025 Recap and a Look at 2026 Carl Villella, CLFP President, Acceptance Leasing & Financing Service

n 2025, the building component manufacturing industry navigated a landscape defined by paradox: record-breaking investment in high-tech infrastructure alongside sharp contractions in traditional residential segments. As the industry pivots toward 2026, the focus is shifting from “surviving the cycle” to “financing the future.”

2025 Recap: The Year of Strategic “Pull-Forwards” The equipment finance sector in 2025 was dominated by two primary forces: trade policy uncertainty and the AI-driven data center boom. •

The Tariff Effect: Early 2025 saw a significant “pull-forward” of capital expenditures. Manufacturers accelerated equipment purchases to beat the implementation of reciprocal tariffs on steel and aluminum. This created a surge in financing volume in Q1, followed by a period of inventory digestion.

•

Sector Divergence: While residential building component demand cooled due to persistent interest rate sensitivity, industrial manufacturing construction reached a record $238 billion in mid-2025. Financing for automated truss lines, wall panel systems, and CNC machinery remained resilient as firms sought to offset rising labor costs.

2026 Outlook: Resilience Through Automation Heading into 2026, the equipment finance market is projected to grow by roughly 6.2%, supported by the Federal Reserve’s rate-cutting cycle and a rebound in residential construction. 1. Financing the “Smart” Factory The “Industry 4.0” hype has transitioned into an operational necessity. In 2026, expect financing to shift toward integrated systems rather than standalone machines. Lenders are increasingly bundling software, sensors, and hardware into single “digital transformation” loans. Manufacturers will look to finance •

Physical AI: Robotics that adapt to custom component designs in real time

•

Predictive Maintenance Tech: Sensors that reduce downtime, often financed as part of the equipment lease.

2. Supply Chain “De-Risking” Tariff volatility has become the “new normal.” In 2026, look for manufacturers to use financing to facilitate vertical integration.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #96

3. The Residential Rebound With global construction activity expected to grow by 3.3% in 2026, the residential sector is poised for a comeback. Financial partners are preparing specialized “bridge leases” to help component manufacturers scale up production capacity quickly as the housing market thaws.

The Bottom Line The watchword for 2026 is flexibility. The most successful building component manufacturers will be those who leverage creative financing to adopt automation, ensuring they can scale up for the housing rebound without being crippled by the next wave of material price shocks. We are Acceptance Leasing and Financing Service, Inc. We were established in 1992, which puts us in our 34th year of business. We pride ourselves on our Certified Leasing and Financing Professional designation. We are a member of SBCA and a frequent attendee of the BCMC tradeshows. We can provide financing for any new and, regardless of age, used equipment. We invite you to contact us at 412 262-3225 to discuss your particular situation.

JobLine.COM

The The

Representing Employers Representing Employers and and Industry Industry Professionals Professionals for Over for Over 30 30 Years Years www.thejobline.com || info@thejobline.com www.thejobline.com info@thejobline.com || 800-289-5627 800-289-5627

Strictly Confidential!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #97

TruStance Portable Field Repair Press

NEW! This is the first, self-contained, truly portable repair unit used to press metal truss plates into dimensional lumber at virtually any location. Wood component (roof and floor truss) manufacturers, as well as builders, frequently require a tool to repair metal plate connected, wood truss components. The complete unit is mounted to a wagon built from square tubular steel. Extremely compact at only 28” wide and about 32” long the wagon features four wheels on soft-rubber solid tires, and a steering axle on the front with a handle that makes the unit easily maneuverable. The wagon contains the hydraulic power unit and an area for a portable gas generator. A rack in the back securely stores the C clamp, a standard 25′ hydraulic hose, and an electric power-supply cable. The clamp is manufactured from T1 steel, cut into a C-shape with a steel tube welded to the front that securely holds the hydraulic cylinder. Pressing is easily performed with a 4×4 magnetized steel platen that holds and presses the truss connecter plates. The C-clamp that weighs less than 30 pounds, features a throat that opens to 4-1/2” inches to accept either 4 x 2 or 2 x 4 lumber. It has a push on and release off switch to cycle the unit. A 10,000-psi electric-overhydraulic power unit pumps hydraulic fluid through a 10,000-psi hose to activate a 10-ton hydraulic cylinder with a 3.9 inch stroke. The unit can be powered by 120v electric power or an optional 120v, 2200-amp (output), gasoline powered Honda generator, which can also act as a portable power supply out in the field for other singlephase equipment. • Pressing Capability: 4.5” throat opening presses 2×4 through 4×2, includes a standard 25-foot, HD 10,000 PSI hose, with a 10 TON, 4”x4” magnetized pressing platen. • Electric/Hydraulic: SPX Hydraulic Technologies – Rockford, IL USA 10,000 PSI / 700 BAR. 10 ton pressing capability • Power Source: The unit is powered by a standard 120v/15 amp electric power or an optional 120v, gasoline powered Honda generator with 2200-watt output capability, which can also act as a portable power supply for other single-phase equipment. • Warranty: One year from date of purchase on manufactured unit, OEM warranties on hydraulic and optional gas motor

765-751-9990

$9,800 FOB MT

PHONE: 800-289-5627

www.woodtechsystems.com

WANTED

Used 14' x 24" diameter Floor Track Gantry Head Working condition preferred, but will consider refurbishable condition as well.

Call 563-235-7449

Equipment Wanted! Saws

Trucks & Trailers

• Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters

Modular Equipment

• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers • Pacific Automation or MiTek Mobile Home Press

Truss Equipment

Contact Wasserman & • Roller Gantry & Hydraulic Associates for a Fair Market Press Systems Value Assessment of your • Finish Rollers Used Equipment • Truss Stackers • • • •

Floor Truss Machines Lumber Splicers Jack Tables C-Clamp Presses

Operational, Needs Work, and Parts Only equipment will be considered!

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

THE MOST

TRUSSED NAME IN LUMBER

Why do so many manufacturers rely on West Fraser for mechanically graded lumber? With over 30 North American mills, 14 of which produce MSR, we run a highly dependable supply chain in both SYP and SPF. Our ability to identify higher grade lumber imparts predictable strength and consistency to high-performing trusses and other products. Why not let our high production standards support yours?

Truss us – we won’t let you down.

STRENGTHINLUMBER.COM

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #99

2003 Klaisler Roller Gantry System

Pricteion! c Redu

• Klaisler Model GR1424 Gantry Roller • Recessed Floor Mounted Rail • (5) 6' x 14' WEG-IT Tables with Ejectors • 460 Volt / 3 Phase • Excludes: Inside E x i t i n g C o n v e y o r, Finish Roller & Outside Conveyor • Price in US Dollars

$65,000 NOW $60,000 FOB Newfoundland 800-382-0329 | www.wasserman-associates.com The

JobLine.com Senior Truss Designer

Pricteion! c e R du

Rocky Mountains J15342 Come live in this mountain resort community. The employer needs an on-site truss designer and will pay $70-150k based on experience, skills, and ability. They prefer a candidate with MiTek software experience and help candidates with relocation and housing assistance if needed. They are a single-location, privately owned company that prefers a team closely connected to the community over everyone working remotely. However, a resort community has it's benefits and challenges,and the employer helps ensure their people are safe, secure, and happy.

800-289-JOBS PHONE: 800-289-5627

www.thejobline.com

2006 Pacific Automation Floor Gantry • 24" Diameter Gantry Roller with Raised Track • 7 1/2 HP Motor (208 Volt / 3 Phase) • Maximum Floor Truss Length: 36' • Floor Truss Depth: 11 1/2" to 26" • Air Cylinder (on top of table) Clamping

• Jig #1: Pop-up Pins / Jig #2: Pop-Up Rollers (for end eject) • Park Section and Uplift Ramp Section • Prices are in US Dollars

$115,000 NOW $109,000 FOB Alberta Canada

800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #100

$382,997 FOB ND

2006 MiTek RoofTracker / AutoPress 14TL

2006 MiTek RoofTracker, side-eject, 122-ft working length, consisting of (16) slotted steel top tables each 6’-4” x 13′-10″ with skatewheel ejectors. Plate pressing capability includes (1) 2006 24” Roof Tracker roller-gantry with (1,514) hrs., (1) 2012 MiTek AutoPress 14TL beam press head with (042) hrs. With (2) 8-ft parking stations, the system includes bus bar electrical feed, any available jigging hardware or available spare parts. Available in January 2026. 480 volt, 3 phase electrical required. (No exit conveyor or final roller included.) 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #101

Adverti$$er

TRUSS EQUIPMENT

Building Component Manufacturing Industry

Job Board Turn Key Platform Post and Manage Multiple Jobs and Multiple Candidates New Application Notices and Internal Candidate Messaging Keeps your search confidential Manage on Your Phone or Computer

For Additional Information

twm@Hiring-Zone.com

1990 Mitek/Diamond Floor Truss Machine • Track Mounted 24” Diameter Gantry Roller with Dual Safety Bars • 6’ x 38’ Table with Air Cylinder Clamping & Built-In Camber • Floor Truss Depths from 12” to 24” • 230/460 Volt - 3 Phase $34,900 FOB OK Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Visit our website: www.Hiring-Zone.com

● ● ●

NEW!

New Baumeister PowerPress Truss Table • 24” Diameter x 14’ Long Rollers (custom lengths available) • Removable Shaft Replacement in Rolls • Simplified Roll Height Adjustment

• • • •

10 HP Motor with Soft Start VFD 230-480 Volt / 3 Phase Front & Rear Emergency Shut Off Bar Integrated E-Stop System with Interlock

$79,880 FOB PA

800-382-0329 | www.wasserman-associates.com

PlanSwift Lumber & Bldg Mat Takeoffs Truss & Wall Panel Design Staff EWP Layouts and much more!

www.AllPoints.Tech

Dave Walstad - Panama City Beach, FL

Cell - 941-713-4395

Dave.AllPoints@gmail.com

PHONE: 800-289-5627

Your Solution for Lack of Technical Staff Eliminate your lack of technical resources to grow sales and increase the clock speed of your company. We have the network and experience you can count on. Deploy Technical Teams from All Points!

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #102

New Fire-Rated One- and Two-Hour Wall Assemblies By Paul B. Schmidt, Chief Marketing Officer

ave you heard the big news? In December, TechWood unveiled two new fire-rated wall assemblies that not only meet IBC/IRC code-compliant fire protection for residential and commercial construction, but exceed code, adding exclusive protections against mold, rot, and termites while stabilizing the wood substrates against warp, twist, and checking. This is a first for wall assemblies, and you’re sure to hear more great things about it. After rigorous testing, TechWood 4400, a pressureless fire-retardant lumber protectant, passed the required ASTM E-119 assembly test. The test is designed to evaluate how well the building components maintain their structural integrity while containing the fire. Several fire-retardant products have listings for wall assemblies, but only TechWood can document no loss of strength as a result of our treating processes. Engineers can count on lumber treated with TechWood 4400 to carry the same load as “bright” untreated lumber, with no reduction in their structural design properties. We’re proud to say that TechWood is the industry leader in pressureless protective lumber treatments for component manufacturers and builders. TechWood technology uses treating processes unique to the traditional lumber treatment industry. Without using punitive high-pressure methods, TechWood infuses lumber with a proprietary solution to prevent mold, eliminate termites, and protect against fire. Lumber is penetrated and completely protected, unlike high-pressure-treated, and retains these protections over time. Moreover, TechWood treated lumber is eco-friendly and non-hazardous—providing safer and cleaner solutions for today’s builders and homeowners. TechWood offers four levels of wood treatment protection, with TechWood 4400 being our latest innovation.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #103

Unlike traditional treated lumber, our TechWood treatments contain no harmful chemicals, are water-soluble, non-toxic, and non-hazardous to humans, animals, and vegetation while being completely recyclable. Our treatments protect lumber surfaces while allowing them to breathe, which greatly reduces the occurrence of airborne mold and naturally occurring formaldehydes after construction—resulting in safer and cleaner homes for long-term performance. In particular, the TechWood 4400 assembly provides more than fire protection and includes warrantied protection against mold, rot, decay, and termites. Building owners and residents benefit by having better Indoor Air Quality (IAQ) and better living conditions. That means TechWood 4400 gives you fire protection that exceeds industry requirements plus additional protections not available with other products. As stated by our company CEO, Irv Minnaker, “At TechWood, our continued testing demonstrates to the industry that our products make buildings better, safer, and cleaner. The two-hour wall assembly listing gives design professionals, builders, and building code officials the confidence to request and approve TechWood products where advanced fire safety is desired or required by code.” Andrew Dingman, our executive vice president, has this to say about our latest offering. “Our two-hour wall assembly gives builders and owners the option for added health benefits, strength, and stability when code requirements only call for fire walls. Our chemistry combined with our strict treating methods guarantee chemical impregnation meeting the ICC standard for fire-retardant treated wood (FRTW) in Type III construction, including the one- and two-hour wall assembly requirements within the IBC Chapter 6.” Building codes call for advanced fire-resistant components especially within multi-unit buildings to prevent fire conflagration between units and to nearby buildings. TechWood is pleased to rise to the challenge of providing the market with products that help meet this need. Moreover, TechWood is the first product of its kind to meet such high industry standards for fire-rated wood frame assembly. Are you ready to see more? TechWood lumber treatment is available across the country through a nationwide network of licensed applicators. Technical Evaluation Reports, Safety Data Sheets, and UL Green Guard certifications for all TechWood products are available for download from www.techwoodtreatments.com. To contact TechWood directly, call 1-833-TEKWOOD or email connect@techwoodtreatments.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

EVEN WITH ALL ITS ADVANCES, THE SAME OLD ADAGE RINGS TRUE. NOTHING DRIVES QUITE LIKE A V.8. Inspired by ten years of intensive field experience and the ample and detailed feedback of numerous customers, we’re pleased to introduce the most advanced, most enhanced and high-performance Terminailer yet - Terminailer V.8. Drawing on invaluable time in the trenches closely evaluating Terminailer’s performance under varying conditions, our engineers have incorporated critical learning and insight to enhance simplicity, performance and operator control. Just part of what V.8 offers includes: •

Vastly enhanced operator control for even greater productivity

•

A redesigned nail-feed supplying EverWin PN90-PAL industrial nail guns

•

Simplified pneumatics featuring direct air-supply to all six nail guns

•

Even more sub-component profiles for wall design flexibility

•

Rugged durability with pharmaceutical grade assembly

Developed by people who know well the mechanics, safety considerations and business aspects of wall panel production, Terminailer V.8 combines more enhancements & operator-friendly features than ever to take your productivity to the next level and beyond. Contact us to learn even more and to put the V.8 performance in motion at your facility.

765-751-9990 www.woodtechsystems.com

Wood Tech Systems is a registered tradename of Wood Truss Systems, Inc.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

PANEL EQUIPMENT

The 2007 VIKING 16' X 12' SQUARING TABLE WITH SHEATHING BRIDGE • 16' x 12' Squaring Table with Powered Width Adjustment & Powered Chain Conveyor • Wall Panel Lengths up to 16', Wall Panel Heights from 4'-0" to 12'-2" • Swing Gates at Both Ends of Squaring Table • Automated Field & Edge Nailing Driving by Panel Pro Event Software & Your Programmed Nailing Patterns • Simple Touchscreen Controls • 2 Tool Carriages for Sheathing Nailing with Tilt Function for Seams • 2 Paslode Nail Guns with High Load Coil Tray • Auto Sheathing Bridge Return • Includes 4 Pallets of Magnum Coil Nails (2 3/8 x .113) • 480 Volt / 3 Phase $29,900 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

January 2026 #18318 Page #105

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Used Panels Plus Wall Panel Lift • Two available at $1,175 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er

Th e

omponent

anufacturing

Serving the Structural Building Components Industry

Presents

Truss Tales Stories and posts on the truss and components industry

Like Money in the Bank. Service you can count on!

Let us know if you would like to contribute to this online forum

The

Building Component Manufacturing Industry

Job Board

Read Now

New Component Table with Skatewheel Conveyors Lift & Extend Skatewheel Conveyors. 10' x 10' Work Area with Squaring Lip. Gun Holster & Nail Tray. $13,900 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

JobLine.com

Truss Design Skills Evaluation $145.00 Measures 9 areas of Skills and Experience Compare Results to National Averages Identify Strengths and Areas For Improvement

Employer <> Candidate

No Recruiting Fees!

Available On-Line

Post Your Opportunity Candidates Respond

Test your design team to have a better understanding of your department strengths and areas for improvement.

Directly to You! For Additional Information

twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website: www.Hiring-Zone.com PHONE: 800-289-5627

• • • •

New Wall Panel Lift 8' to 12' Wall Heights 1,000 Lb Capacity Weight: 120 Lbs Excludes: Electric Hoist & Freestanding Bridge Crane $1,950 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Use your team's results to measure against potential new hires!

For Additional Information email: twm@thejobline.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Wasserman & Associates Framing Table With Panel Bridge

Wasserman W asserman & &A Associates ssociates

Onnee T O Taa

bbllee S Syyss

One Ta

ble Sys

tem $9

8,880

**In Incclu luddeess In Inssta tall llaati thee U th tioonn S Unnit iteedd S Suuppppoo Sta tate tess & &C Caannaadd aa Web: www.wasserman-associates.com Web: www.wasserman-associates.com

Wasserman W asserman & &A Associates ssociates

2341 Shepard 2341 Shepard Rd Rd Milford NE Milford NE 68405 68405 Phone: 800-382-0329 Phone: 800-382-0329

tteem m $$99

Poin -Laser Poin -Laser Retu Auto Retu -Bridge Auto -Bridge Sea Sheathing Sea at Sheathing Tilt at -Bridge Tilt -Bridge Patte Fastener Patte -Programmable Fastener -Programmable Convey Skatewheel Convey -Pop-Up Skatewheel -Pop-Up Heig Wall Heig 12’-5” Wall to 12’-5” -6’-11” to -6’-11” Sto Squaring Sto -Fixed Squaring -Fixed Ra Floor Ra -No Floor -No

-Laser Pointer -Bridge Auto Return -Bridge Tilt at Sheathing Seams -Programmable Fastener Patterns -Pop-Up Skatewheel Conveyors -6’-11” to 12’-5” Wall Heights -Fixed Squaring Stops -No Floor Rails

8,880

*Inclu des Ins t h e United tallation Sup Wasserman & Associates p States & Can ort in 2341 Shepard Rd ada Milford NE 68405 Phone: 800-382-0329 Web: www.wasserman-associates.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #107

2020 Spida Wall Panel Equipment

e c i r P on! i t c u Red WALL EXTRUDER

CURVED CONVEYOR

• Wall Lengths to 20' / 6' to 12' Wall Heights • Length Stops Position the Top & Bottom Plates for Nailing (as directed by Wall Panel Design Software output) • Touch Screen Computer/Enclosure • 4 Everwin PN80PAL Coil Feed Nail Guns

WALL EXTRUDER OUTFEED CONVEYOR • Transfers Wall Panels from the Wall Extruder to the Squaring Table

STUD EXTRUDER • Nail C, L, U Sub-Assemblies and Double/Triple Studs

• Transfer Sub-Assemblies & Studs to the Wall Extruder Operator

SQUARING TABLE • Squaring the Wall Panel before attaching Sheathing

Excludes: Installation/Training and Annual Technical Support Fee EQUIPMENT FINANCING available from Fidelity Leasing

$249,000 NOW $195,000 FOB AZ

• Touch Screen Computer/Enclosure

• 2 Everwin PN80PAL Coil Feed Nail Guns

800-382-0329 | www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Al Coffman

•

Jean Hart

•

Curt Holler

•

Chuck Ray

•

Glenn Traylor

•

Elliot Wilson

If you have questions about how you can make this selection, please contact your authorized agent above or Glenn Traylor at 919-280-5905 or trusguy@gmail.com.

https://www.tpinspection.com/ https://www.tpinspection.com/auditing-services/truss

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #109

2023 Panels Plus Single-Tool Sheathing Station

Featuring precision Gen. 2 controls, this system squares and sheathes wall panels ranging up to 16′ in length and up to 12′ -3″ wall height with dimensional material from 2×4 through 2×10. This late-model system includes a servodriven bridge with joy-stick controlled motion on the operator’s riding platform. The single, large-coil capacity tool carriage travels across the wall frame inserting sheathing fasteners at the spacing set by the operator. The stitchers will automatically insert fasteners through the sheathing into the top and bottom plates at your chosen spacing during the auto-return process. The bridge has 9 programmable presets for fastener spacing. Other features include: Single Beam Bridge, top and bottom plate stitchers, Operator Platform with Windows industrial touchscreen, and joystick control. Squaring table features a squaring edge, footswitch & push-button controls for telescoping side and horizontal outfeed rollers. 120 PSI at 60 CFM air.120 volt AC electrical required. Utilizes large-coil 15º wire-collated nails. (No nail tools included).

185,000 FOB WI 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #110

Adverti$$er

When Meetings Get in the Way of Work

Thomas McAnally TheJobLine.com Hiring-Zone.com The Advertiser

eetings are a necessary part of running any business. They can align teams, solve problems, and move projects forward. But in many organizations, meetings have quietly grown out of control. What once served a clear purpose has, over time, turned into a standing calendar block that exists simply because it always has. The result is lost productivity, frustrated employees, and hours spent talking instead of doing.

In manufacturing environments like truss plants, wall panel facilities, and component operations, time is especially valuable. Designers, estimators, production managers, and sales teams already work under tight schedules. Pulling several people into a one- or two-hour meeting “just in case” something comes up often creates more disruption than benefit. Many of these meetings could be handled with a short phone call, a quick Zoom check-in, or a well-written memo. A common issue is attendance by default. People are invited because they have always been invited, not because they are needed for the topic at hand. Designers are asked to report that there are no issues. Production staff are pulled away from schedules just to confirm things are running as planned. These updates could be requested with a simple question, “Do you need help?” followed by a call if the answer is yes. Another problem is over-allocated meeting time. Meetings are often scheduled for an hour or two when the actual scope may only require 15 or 30 minutes. Once the agenda is finished, the leftover time frequently turns into side conversations, personal updates, or unproductive discussion. Meanwhile, calendars remain blocked, preventing people from returning to focused work. In truss operations, that can mean delayed designs, slower releases, and lost production momentum. Managers should also reconsider the purpose of recurring meetings. Daily, weekly, and monthly meetings

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #111

tend to accumulate over time, even as their original value fades. Is the meeting solving problems, or simply reporting information? If the goal is information sharing, an email summary may be more effective. If discussion is needed, attendance should be limited to those directly involved. When was the last time you asked if certain meetings were necessary? Asking employees which meetings help them and which do not can be eye-opening. In many cases, people attend meetings that add little value to their role, simply because attendance is expected. This issue is not limited to manufacturing. An accounting executive recently identified several standing meetings that existed only because “that’s how it’s always been done.” By shortening some meetings, making others optional, and eliminating a few altogether, her team reclaimed hundreds of productive hours each year. For truss industry leaders, the question is worth asking. Are meetings supporting production, design accuracy, and customer service, or are they getting in the way? Rethinking how, why, and when meetings are held may be one of the simplest ways to improve efficiency, morale, and results without adding staff or cost. Sometimes, the most productive meeting is the one you do not hold.

JobLine.COM

The

Strictly Confidential!

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

SCAN THE QR CODE TO VISIT OUR WEBSITE AT WWW.PANPLUS.COM

2-TABLE EXTERIOR LINE INCREASE PRODUCTION. MAINTAIN A SMALL FOOTPRINT. EXPANDABLE.

FRAMING STATION

SHEATHING STATION

Consisting of a Framing Station and Sheathing Station, the Exterior 2-Table Line frames and sheathes wall panels while maintaining a small footprint, perfect for those with limited space. This system is a great starting point for customers planning on adding more equipment as their business and budget grows.

CALL US TODAY AT

1-866-726-7587

2026 WORKSHOP Save the Date! APRIL 29

—

MAY 1

Orange Beach, Alabama Island House Hotel – a DoubleTree by Hilton 26650 Perdido Beach Blvd Orange Beach, AL 36561

Hotel Deadline: April 6

Wednesday, 4/29

Golf Outing or Fishing Charter Social Hour Independent Dinner Thursday, 4/30

Educational Sessions Tour: Canfor (Axis, AL) Hosted Dinner Friday, 5/1

Educational Sessions Roundtable

Learn more & register at

on the recommendation “of aI attended lumber supplier and the entire experience was valuable to me. I learned a lot – from the different presenters to the plant tour and just speaking with other participants.” —Adam DeBiasio, United Lumber Home Hardware Building Center, Barrie, ON, Canada

The Workshop puts you in front “of the right people in one place to get answers to your questions about MSR, whatever they might be.” —Ross Harter, Drexel Building Supply, Wrightstown, WI

enjoy the Workshop because of “its Iintentional focus on creating opportunities for valuable face time. It’s a lot more intimate than other shows I attend during the year, which makes it a forum where you really get to know people and they get to know you.” —Ben Evans, Birmingham International Forest Products, Birmingham, AL

MSRLUMBER.ORG/WORKSHOP

ProStack

By: DAK Automation

765-751-9990 www.woodtechsystems.com

Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #115

Pricteion! c Redu

2017 Bradbury R-Stud Rollform Line $650,000 NOW $389,000 FOB OR • Model SRDE6.5 Stock Reel

• Roll Tooling

• Model RS35-4-12" Roller Straightener

• Beck Automation Controller

• Model FR5-12 Feed Roll

• Citronix CIJ Ink Jet Printer

• Hydraulic Press System with Three Feature Dies (36" Feeds)

• 3 5/8" and 6" R-Stud

• 22' Powered Entry Conveyor • Model 420 STR Rollformer (10 Forming Stations)

• Coil Inventory • Reference Uploaded PDF for Additonal Details & Layout

800-382-0329 | www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Consider the

BENEFITS of Membership

The MSR Lumber Producers Council (MSRLPC) represents the interests of machine stress rated lumber producers in the manufacturing, marketing, promotion, utilization, and technical aspects of MSR and MEL lumber. Suppliers, customers, and professionals may join as Associate members to enjoy:

• Online Marketing • Networking Opportunities • Reliable Market Data • Education “There is no question that the MSR Lumber Producers Council meetings are worth your time to attend. The information you will receive from the guest speakers and members of the Council is unparalleled!” —Sean Kelly, Automated Products Inc.

LEARN MORE & JOIN AT:

msrlumber.org/about

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #117

Fitzgerald Group, LLC Equipment Wanted! Saws • Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters

Truss Equipment • Roller Gantry & Hydraulic Press Systems • Finish Rollers • Truss Stackers • Floor Truss Machines • Lumber Splicers • Jack Tables • C-Clamp Presses

Trucks & Trailers

• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers

Modular Equipment • Pacific Automation or MiTek Mobile Home Press

Contact Wasserman & Associates for a Fair Market Value Assessment of your Used Equipment Operational, Needs Work, and Parts Only equipment will be considered!

800-382-0329 | www.wasserman-associates.com

RFitzgerald@FitzGroup.com 719.528.5445

www.FitzGroup.com

SWING GATES Swing gates bolt onto either end of the Panels Plus stations and allow subcomponents and wall panels to roll freely from station to station without having to be lifted. The swing gates allow walk-through passage between stations and can be swung back into place to prevent product from dropping between the stations. This allows the operator to move from one side of the line to the other without having to walk around the entire system line.

CALL US TODAY AT: 1-866-726-7587 VISIT OUR WEBSITE AT WWW.PANPLUS.COM

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #118

Design Connections

Geordie Secord, Senior Recruiter TheJobLine.com – Canada

AI in Truss Design: Opportunity or Long-Term Risk?

Artificial Intelligence (AI) is no longer a distant concept—it’s here, and it’s reshaping industries at an unprecedented pace. For component manufacturers, AI promises efficiency, speed, and cost savings. For years now, we’ve been promised that one day we would be able to get truss designs “at the push of a button” and that day is almost here. Imagine truss designs generated in minutes, optimized for material usage, and ready for production. It sounds like a dream, and in many ways, it will be. But as someone who has spent over 35 years in this business, I believe caution is not just advisable—it’s essential.

The Allure of AI AI-driven design tools are advancing rapidly. Within a few years, I expect AI will be capable of producing truss designs with 90% accuracy. That’s impressive. But here’s the question: what about the remaining 10%? In our industry, a 10% error rate isn’t just a rounding issue—it can mean structural failures, costly rebuilds, and liability nightmares. If those errors slip through unchecked, the financial and reputational damage could far outweigh the savings AI brings. I was once told that working in component design was like taking a never-ending math test where any score less than perfect was considered a failure. Of course, mistakes are going to happen, but whereas 90% on a math test in high school would generally be cause for celebration, 90% accuracy as a component designer means you are likely to have a short career. That reality underscores why human oversight remains critical— even as AI becomes more capable.

The Talent Pipeline Problem Here’s the bigger concern: if AI replaces junior designers today, who will become the senior designers tomorrow? Traditionally, junior designers learn the craft through hands-on experience, gradually developing the judgment and intuition that no algorithm can replicate. It has been proposed that the easiest path to AI integration might include using senior, experienced designers to review work created by AI. But, if we eliminate that entry-level training ground, we risk creating a future where there are no seasoned professionals to review AI-generated work. Ten or twenty years from now, who will catch the mistakes AI inevitably makes? This isn’t just a theoretical problem—it’s a structural one. Our industry thrives on expertise built over decades. If we disrupt that pipeline, we may find ourselves overly dependent on technology that, while powerful, is not infallible. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #119

The Cost of Overconfidence Let’s put numbers to this. Suppose AI handles 90% or even 95% of designs flawlessly. That remaining 5%—the errors—could lead to thousands of dollars in material waste, project delays, and even legal exposure. For a component manufacturer operating on tight margins, one major mistake could erase an entire year’s profit. Are we prepared to absorb that risk? Or worse, are we prepared to explain to a client why their structure failed because “the computer said it was okay”?

A Balanced Approach AI is coming and resisting it entirely would be a mistake. The benefits are real: faster turnaround, reduced labor costs, and enhanced optimization. But adoption must be strategic. Here’s what I recommend: •

Invest in People: Continue hiring and training junior designers. Let them work alongside AI, learning to spot errors and understand design principles. This hybrid approach ensures we maintain a pipeline of experienced professionals.

•

Define Review Protocols: Establish rigorous checks for AI-generated designs. Senior designers should remain the final authority, not just a rubber stamp.

•

Measure Risk vs. Reward: Calculate the potential cost of errors before fully automating. If the downside outweighs the savings, rethink the strategy.

•

Plan for the Long Term: Technology evolves, but human judgment remains irreplaceable. Build a workforce that complements AI, not one that disappears because of it.

The Bottom Line AI will transform the truss and component business—it’s inevitable. But transformation without foresight can lead to unintended consequences. As manufacturers, we must embrace innovation while safeguarding the expertise that has sustained this industry for decades. The question isn’t whether AI will change our work—it’s whether we’ll manage that change wisely. How do you feel about the coming adoption of AI in this industry? Is it inevitable? Will it really deliver on the promises we are hearing? Will there be a bust brought on by a shortage of experienced, knowledgeable people over the long term?

If you want help finding that next perfect component designer or design job in Canada, please contact me. If your work is in the mass timber world anywhere in North America, I’d love to talk to you about connecting you to that next great job or candidate. You can reach me at secord@ thejobline.com, or 800-289-5627 ext. 2. I’m also happy to engage at: LinkedIn.com/in/geordiesecord www.thejobline.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Partner with us for a complete solution in the structural building components industry

Our people focused approach means you’re integral to everything we do...

Design Philosophy based on Simplicity Expertise & Innovation Reliable, High Quality Machinery Market Leading Software & Automation Global Manufacturing Capabilities Local Responsive Service & Support

T +1 866 647 7771

spida.com

Vastly enhanced operator control for even greater productivity

•

A redesigned nail-feed supplying EverWin PN90-PAL industrial nail guns

•

Simplified pneumatics featuring direct air-supply to all six nail guns

•

Even more sub-component profiles for wall design flexibility

•

Rugged durability with pharmaceutical grade assembly

765-751-9990 www.woodtechsystems.com

Wood Tech Systems is a registered tradename of Wood Truss Systems, Inc.

https://cadynce.com

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #123

Adverti$$er

NEW! Building Component Manufacturing Industry

Job Board

CLICK HERE for more information

Turn Key Platform Post and Manage Multiple Jobs and Multiple Candidates New Application Notices and Internal Candidate Messaging Keeps your search confidential Manage on Your Phone or Computer

For Additional Information

twm@Hiring-Zone.com Visit our website: www.Hiring-Zone.com

New Panels Plus Wall Panel Framing Equipment

Consider Panels Plus wall panel assembly equipment for manufacturers of wood or steel wall panels, floor-panels, and related framing components. Panels Plus is an employee owned, ISO certified, manufacturing company that builds state-of-the-art equipment featuring durable construction, with fit and finish second to none in the structural building component industry. The referenced base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. This framer design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality. Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages. Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Squaring stations, sub-component tables, conveyors and panel lifts are also available to complete the configuration of the wall panel assembly line. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical.

765-751-9990

ProStack Wall Panel Tilt In-Feed Conveyor Solving the problem of missed fasteners on exterior sheathing remains one of the primary reasons for call back charges and exceptions noted during jobsite building inspections. Clearly finding and resolving missed fasteners or “shiners” becomes mission critical before a sheathed wall panel leaves the production line. Our shop-proven, tilting conveyor makes the process safe, fast, and labor efficient. The ProStack tilt in-feed safely lifts wall segments to 45º in 5 seconds for inspection and on to 75º for easy to reach repairs. This tilt system is also excellent for installing blocking , windows, and other details in your wall panel segments. More information click here. 72,665 FOB ND

NEW!

765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

NEW! $37,525 FOB ND

ProStack Wall Panel In-Feed Conveyor ProStack powered in-feed conveyor was engineered to deliver wall panel segments at a matched speed and height into the ProStack automated wall panel stacker. Built for smooth operation and assembled with laser cut, powder-coated finish steel. Base model conveys wall panel segments up to 12’ in height and up to 16’ in length for wall segments up to 1,600 lbs. Extended length systems come in standard 20′ and 24’ length capacity. All models come with adjustable working heights and variable conveyor speeds. Powered in-feed conveyor section, synchronized chain drive under top and bottom plate for open access, 5-HP, 208v, 3Ph power. Adjustable working height from 28” to 34”. 16′ length capacity.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

How will you choose to equip YOUR Wall Panel Line?

SO MANY

OPTIONS!

Ai Subcomponent Assembler Component Tables: RoCat or Tilting Rocat

POWER Chain Conveyors

Framing Table

ext. 133

Find us on YouTube!

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #125

NEW!

New Panels Plus Combination Table

Price: $Call for pricing FOB: MN 765-751-9990

www.woodtechsystems.com

CT-Darnell.com | 800-353-0892

2007 Panels Plus Steel Wall Panel Sheathing Station $74,970 NOW $68,997 FOB MN 765-751-9990 PHONE: 800-289-5627

www.woodtechsystems.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

LL T

2026 Wood Construction Course: Wood Design, Loads, Disaster Mitigation, and Ethics

By Frank Woeste, Professor Emeritus, Virginia Tech

January 2026 #18318 Page #126

Th e

HINGS WO

s you’re building your 2026 calendar, be sure to block in time for our next wood construction course sponsored by the Virginia Tech Continuing and Professional Education program. Co-sponsored by the International Code Council, this spring we’re offering “Wood Design, Loads, Disaster Mitigation, and Ethics.” Held at The Inn at Virginia Tech on April 28–29, 2026, this course is intended for structural engineers, architects, residential designers, wood truss and wall component manufacturers, engineered wood product (EWP) designers, connector and fastener suppliers, general contractors, homebuilders, home inspectors, building code officials, plan reviewers, and inspectors. With 15 hours of instruction, the sessions are as follows. •

Strengthening Ethical Knowledge and Professional Practices by Frank Woeste, PhD, PE

The purpose of this unit is to explore ways to address ethical responsibilities in professional engineering practice work in a jurisdiction while satisfying both the rules, practices, and professional responsibilities defined by the engineer’s licensing state and one’s professional and personal ethical standards. We’ll demonstrate how an AI tool can be used for research to investigate differences in scope and specificity of professional responsibilities when practicing in multiple states. •

Wood Truss Repair by Marvin Strzyzewski, PE

Wood trusses may need repair for a variety of reasons. Trusses can be damaged upon delivery or while they get set in place. Other trades may cause damage by drilling or notching a truss member. In this program, we will review the typical repair methods and discuss the materials used in the repair. Also, more complicated situations will be discussed, such as a wrong profile, trusses set endfor-end or upside down. Means and methods will be discussed, and suggestions will be provided for other items to consider when repairing a wood truss. This topic will be in conjunction with the Fastener Spacing and Pattern unit.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

•

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #127

Dynamic Loading of Wood Floor Members: A Case Study by Scott D. Coffman, PE

Dynamic floor loads amplify the demands on structures compared to static loads and are often neglected in design. Recent residential floor collapses have been associated with rhythmic movement of parties congregating in living and common spaces that apparently overload floor framing systems. This case study follows a method to determine and evaluate dynamic loads on wood floor systems, identify the potential of detrimental dynamic loads, and makes recommendations to reduce future collapse risks. •

ASCE 7-22 Flood Load Design Procedures by John “Buddy” Showalter, P.E.

The purpose of this unit is to determine proper evaluation of flood loads per ASCE/SEI 7 Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22) Supplement 2. Per ASCE 7-22 Supplement 2, the Flood Hazard Area is increased from the 100-year flood plain to the 500-year flood plain for Risk Categories II, III, and IV structures to improve the performance of structures subjected to flood events and to meet the target reliabilities of the standard. This change in approach, along with revised loading equations, is a significant departure from previous versions of ASCE 7. In addition to other updates in this supplement, the majority of Chapter 5, Flood Loads, and its commentary have been updated and reorganized. •

Flood Mitigation Techniques and Procedures by William Bracken, PE, CFM

This unit will introduce and discuss the primary methods in which flooding causes damage to buildings. This unit will then introduce and discuss techniques and procedures that can be implemented on new and existing buildings aimed at mitigating flood damage to include wet and dry floodproofing. Specifically, the discussion will introduce the minimum requirements found within the 2024 International Building Code® (IBC®), the IBC-referenced 2022 ASCE/SEI 7 Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22) and the IBCreferenced 2024 ASCE/SEI 24-24 Guidance on Structural Safety in Flood Areas. This unit will then review techniques and procedures found within FEMA’s P-936 Floodproofing Non-Residential Buildings and FEMA’s Technical Bulletins addressing wet floodproofing. An overview of the key techniques along with examples to show their application will be presented. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

•

Adverti$$er

January 2026 #18318 Page #128

Importance of Considering Wood Shrinkage by Scott D. Coffman, PE

Cumulative shrinkage in buildings of three or more stories can be significant and have an impact on the function and performances of finishes, openings, mechanical/electrical/plumbing (MEP) systems, and structural connections. The guidelines for designers to accommodate wood shrinkage are straightforward once understood and properly implemented. This session describes procedures for estimating wood shrinkage, interaction with other building materials, and detailing options that minimize shrinkage effects on building performance. •

2024 NDS Supplement Updates, Design Values, Adjustments and Lumber Specifications by Frank Woeste, PhD, PE

Lumber grading methods, grade marks, species and specie combinations, properties, design values, adjustment factors, safety factors, and the 2024 NDS Supplement will be reviewed. Emphasis will be placed on clearly defining and communicating lumber assumptions in construction documents to improve coordination among designers, truss and wall component suppliers, contractors, and inspectors.

•

NDS Multiple-bolt Connection Design by John “Buddy” Showalter, PE

This unit provides an overview of a multiple-bolt design example utilizing the American Wood Council’s 2024 National Design Specification (NDS) for Wood Construction. Topics include connection design philosophies and behavior, an overview of NDS provisions related to bolt design including local stresses in fastener groups, and a detailed design example.

•

Commercial Post-Frame Buildings and Engineering by Frank Woeste, PhD, PE

Commercial post-frame applications, typical costs, typical materials, building and foundation systems, building code recognition, fire-resistance data, structural components, shear wall, and diaphragm testing data will be presented and discussed. In addition, the simplified lateral-load design method will be reviewed and sources of available design software and other design resources for engineers and building officials will be summarized. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

•

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #129

Wind Mitigation Techniques and Procedures by William Bracken, PE, CFM

This unit will introduce and discuss the primary methods in which wind causes damage to buildings. This unit will then introduce and discuss techniques and procedures that can be implemented on new and existing buildings aimed at strengthening main wind force resisting systems and components and cladding to mitigate wind damage. Specifically, the discussion will introduce techniques and procedures found within the ICC600® Standard for Residential Construction in High-Wind Regions® and provisions found within Florida’s Building Code. An overview of the key techniques along with examples to show their application will be presented. •

Fastener Spacing and Patterns by Marvin Strzyzewski, PE

This unit will provide a review of the National Design Specification® (NDS®) for Wood Construction requirements for fastener spacing and will provide information about fastener patterns. Included will be a discussion on engineered screws and the recommended installation and fastener patterns for these fasteners. •

ASCE 7-22 Rain Load Design Procedures by John “Buddy” Showalter, PE

The purpose of this unit is to determine proper evaluation of rain loads per ASCE/SEI 7 Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). ASCE 7-22 is referenced in the 2024 International Building Code (IBC). The design storm return period for determination of hydraulic head is now to be based on risk category. Other ponding provisions are updated to be consistent with ASCE 7-22. The IBC requires roofs to be designed to sustain the load of rainwater or melting snow per the requirements of ASCE/SEI 7-22.

For More Information Please consider joining us for this two-day event. We have a room block reserved at The Inn at Virginia Tech and Skelton Conference Center, but space is limited. The Inn is the only hotel located on the Virginia Tech campus and offers convenient surroundings and state-of-the-art technology. The campus complex is within easy walking distance of downtown Blacksburg. For more specific information on course content, please contact me at (540) 951-0469, or e-mail fwoeste@vt.edu.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

OUR NAME IS ON IT.

THE QUALITY IS BUILT-IN. The Ranger Retrieval System from Acer is the reliable partner for linear component saws, maximizing productivity in your plant. There’s nothing else like it. Acer Inc. 301 Industrial Drive Rushford, MN 55971 507-864-2220 www.acerinc.com

RANGER RS is a trademark of ACER INC. The RANGER RS system is protected under U.S. Patent #8,960,244 and other patents pending.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #131

Adverti$$er

New ProStack

Wall Panel Stacker

NEW!

NEW 12' X 16' FRAMING TABLE

• Pop-up Skatewheel Conveyor • Powered Height Adjustment (6'-11" to 12'-5" wall heights) • Fixed Squaring Stops • Excludes Tool Dollies • 110 Volt / 20 Amps • Add $6,600 for Stud Locators at 16" & 24" O.C. • Add $3,500 for 1 Pair of 15' Skatewheel Conveyor with Stands

• Add $13,900 for Sub-Component Layup Tables with Pop-up Skatewheel Conveyors • EQUIPMENT FINANCING available from SLS Financial Services

$39,500 FOB NE

800-382-0329 | www.wasserman-associates.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Presents

Read Now

Truss Tales Stories and posts on the truss and components industry Let us know if you would like to contribute to this online forum

Call for Pricing FOB ND Reduced labor, increased safety, the benefits just keep stacking up. Stacking wall panels at the end of your production line can be a real labor-intensive and safety-challenging task. But it doesn’t have to be now, thanks to ProStack. This innovative wall panel stacker literally stacks from the bottom up, reducing awkward overhead lifting & placement, and the risk of head injury. Plus, ProStack frees up at least one worker to return more productively to your core task—building wall panels. Enhanced worker safety and productivity is what ProStack is all about. Developed for commercial wall panel production facilities this is the remarkable ProStack, fully automated wall panel stacker. The ProStackrelieves your build team from creating a stack of wall panels and keeps them building walls instead. Stacks 2×4 through 2×8 walls up to 20′ in length and up to 12′ in height (taller by special order). The ProStack will automatically center or left or right justify each layer including multiple wall segments on the same layer. For ease of loading in your yard or on the build site, fork pockets are created in two ways: The operator can attach blocking up to 5″ tall to the last wall of the stack prior to entering the stacker, or two shorter walls can be spread apart prior to the second to last row of the stacker. Designed without any overhead frame or apparatus, so no crane inspections are required. The ProStack is “event driven”, so there is no need to read a file. Setup and installation is easy too, without the need for complex training or disruption to workflow. So free up your team to do what they do best, and you need to do most, and let ProStack stack your wall panels instead. ProStack can even operate with your existing powered conveyors or select our optional matching conveyors (see the video shown below). 208 volt, 3 phase, 43 Amp base model electrical required. No air required. Footprint is 26′-5″L x 19′-3″W. For additional information Click Here

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

Wasserman & Associates Wall Panel Line Accessories

t w en Ne ipm u Eq

nt ew me N ip u Eq

Wall Panel Lift * 8’- 12’ Wall Height * 1,000 LB Capacity * Easy Adjustment * Hoist and Crane Sold Separate

$1,950.00

Handle Bar Router * 8’ - 12’ Wall Height * 2 Person Operation * 3 ¼ hp Production Router * 120 Volt /1 Phase/15 Amp

$3,000.00

Lay-Up Tables * 10’ x 10’ Working Area * Lift & Extend Rollers * Squaring Lip * Nail Tray

$13,900.00

Skate Rollers * 15’ Standard Length * Adjustable Height * Sturdy Stands * Custom Lengths Available

$3,500.00

EST. 1991

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #133

$235,000 FOB WA

2019 Peterbilt with Manitex Crane • 2019 Peterbilt (40,000 Miles) • Cummins X15 500 HP Diesel Engine • Eaton 10 Speed Autoshift • Power Windows, Locks & Mirrors

• Cruise Control • Jake Brakes • Manitex Model TM200 20 Ton Crane • 84' Six Section Boom

800-382-0329 | www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Design and build faster than ever. From plans, to walls, to panels, and everything Learn more at EagleMetal.com

above. Introducing a new level of design tools, built from the ground up.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

TRUCKS & TRAILERS

Pricteion! c Redu

January 2026 #18318 Page #135

Adverti$$er

EXTENDABLE TRUSS TRAILERS

38’-53’, 42’-60’, 50’-70’ & 53’-80’ sizes available

2 YEAR WARRANTY

2022 Peterbilt 579 S/A Day Cab Truck #1 Paccar MX-13 / 12.9L / 405 HP Engine 249,300 Miles / 5,566 Engine Hours Auto Transmission Engine Brake 12,000 Lb Front Axle / 22,700 Lb Rear Axle / 34,700 Lb GVWR Air Trac Air Ride Suspension 148 Inch Wheelbase Dual Fuel Tanks Tires are Very Good $35,000 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1997 Lakeside JDH Trussmaster 36-51 ft Stretch Trailer (OR-1) 1997 Lakeside JDH Trussmaster 36′51′ – Lakeside trailer features 5th-wheel connection, sliding tandem axle, locking rollers and hydraulic lift neck. Current DOT inspection September 2023. 50% brakes and 50% tire tread remains. 26,000 GVWR $28,997 NOW $21,997 FOB MO Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2021 Big John Extendable Pole Truss Trailer Extendable pole trailer Used for 60' span roof trusses, peak down Retracted length - 35'. O.A. Extended length - 45' O.A. Adjustable 2' Increments Outer tube frame - 8" square tube Inner tube frame - 6" square tube Axles - (2) 25,000 LB Capacity Each Axle width -102" Anti-lock brake system Parking brakes on both axles Wheels - 10 stud outboard drums Tires - 11 R 22.5 radials Rims - 22.5 steel unimount (8) alum wheels Suspension - Watson air ride with dump valve Landing gear - 2 speed Bumper - standard Lights - DOT Specs, LED Package (2) truss stands (4) winches with straps $29,900 NOW $14,900 FOB SC Wasserman & Associates 800-382-0329 www.wasserman-associates.com

ALL TRAILERS NOW AVAILABLE WITH OPTIONAL GALVANIZED ROLLERS (Shown with Optional Headache Rack)

VALUE PACKAGED WITH PIN LOCKS, LOAD CONTROL, LED LIGHTS, STROBE LIGHTS & MORE!

BUILDING EXCEPTIONAL QUALITY TRUSS TRAILERS IN THE U.S.A.

FOR OVER 20 YEARS

Scan the QR Code to take you directly to our website. For more information or to request a quote Call or Email: 1-800-237-5161 sales@precisionequipmfg.com

Building Component Manufacturing Industry

Job Board Employer <> Candidate

No Recruiting Fees! 2005 Rayfab 32′ Roll Off Trailer 32′ Rayfab trailer features 5th wheel connection, locking rollers, straps, a 10,000 lb axle, electric brakes, spring suspension, and 2 speed landing gear. Manufacturer states the lightweight trailer is ideal for oneton trucks. Trailer weighs approximately 5,420 lbs. DOT expired February 2025. $7,990 FOB OH Wood Tech Systems 765-751-9990 www.woodtechsystems.com PHONE: 800-289-5627

Post Your Opportunity Candidates Respond

Directly to You! For Additional Information

twm@Hiring-Zone.com Visit our website: www.Hiring-Zone.com

2019 Landoll 48-ft Roll-off Trailer

2019 Landoll 48′ Roll-off Trailer with Anti-lock Brake System (ABS), sliding tandem axles, spring suspension, rollers: Galvanized 6″ x 95 5/8″ tube, Rear 15 rollers @ 24″ O.C., front 6 rollers @ 36″ O.C. Hydraulic Lift neck with a Honda 13 h.p generator and onboard battery, Roller Locks: 2-Zone (front and rear) Air-powered, Controls: Mounted roadside at landing gear, galvanized 15″ dia. ground rollers, LED lighting, Straps: Sliding winches complete with straps to curb-side “J-hooks”, Air-powered fold-away Galvanized under-ride bumper, Mud Flaps behind tandem. Black powder-coated finish. Current DOT inspection as of 24 June ’25.

765-751-9990

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

By MiTek Staff

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #136

Calculating Dead Loads on Studded Trusses

hen designing a truss to be used as a free-spanning structural gable or party wall application, additional dead loads may need to be considered. The MiTek engineering software does not account for self-weight of the truss or for any additional weight of sheathing or drywall being applied to one or both faces of a truss. In the case of a continuously supported truss, the vertical studs will support the sheathing and transfer the load to the bearing below, therefore this is normally not a concern. On a free-spanning truss, such as a structural gable, this additional weight must be carried by the webs and chords of the truss and needs to be accounted for in the design. Let’s run an example to see how to determine the weight of the materials being added to the truss on a 24 feet long and 4 feet tall flat truss. We first need to consider the weight of the additional studs that the sheathing is getting connected to. This can be easily done by comparing the weight of the truss without studs to the weight of the truss with studs.

The difference between the weights will be the amount of additional dead load needed to account for the weight of the studs: 141 lbs – 97 lbs = 44 lbs. This will be added to the total weight of the additional sheathing to be added to the truss. Next, we need to determine the weight of the sheathing material being used. This can be found in several places. Most manufactures provide the weight, along with other specifications, of their products on their websites or other product literature. Or you can find a list of weights of materials in SBCA’s Load Guide. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #137

Let’s assume we are sheathing one face of the truss and our sheathing material weighs 2 psf (lbs/sq-ft). This will be the weight we’ll use to determine how much additional loading to apply to the truss. Next, we’ll need to calculate the area of the face of the truss that will be sheathed. Multiply the Span by the Height to calculate the area: 24 ft x 4 ft = 96 sq-ft. area. Multiply that by the weight of our material (2 psf), and we get a total weight of 192 lbs. This is the total weight of all the material to be added to the face of the truss. Add this to the weight of the additional studs to come up with a total weight to be added to the truss: 192 lbs + 44 lbs = 236 lbs. Now we need to add that load to the truss. The load will be applied to the top and bottom chords. The first thing to do is to determine the uniform load from the total load (total weight): 236 lbs divided by 24 feet span = 9.8 plf of uniform load. Half the uniform load is applied to top chord and half the uniform load to bottom chord to account for the additional dead load. 9.8 plf / 2 chords = 4.9 plf dead load applied to top and bottom chord members using Manual Loading in engineering. Please note, upward Wind load cases require a 60% reduction to dead load. If you determine the weight of the materials being added to the 24 feet long and 4 feet tall common truss, follow the same steps, except to calculate the area multiply the Span by the Height and divide it by 2: 24 ft x 4 ft / 2 = 48 sq-ft. If weight of sheathing material is 2 psf, then total weight is 96 lbs. Let’s assume the weight of the studs is the same as in the example above – 44 lbs. Total weight to be added to the truss: 96 lbs + 44 lbs = 140 lbs or 5.8 plf. Trapezoidal load from 0 at the left end of the truss to 5.8 at the peak and from 5.8 at the peak to 0 at the right end of the truss must be applied to top and bottom chords using Manual loading in engineering. When you are done applying the additional loading, review the loads and confirm that they are correct in magnitude direction and location. For additional information, or if you have questions, please contact the MiTek Engineering department.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Valuable

WEBSITE Resources Visit msrlumber.org to find: • Sources for MSR Lumber

Filter by species, grade and dimension to locate products from MSRLPC members.

• Educational Resources

Find helpful information for current and potential MSR lumber users.

• NEW! Design Values Comparison Tool

Compare MSR lumber reference design values with visually graded dimensional lumber by species.



The MSRLPC website is a one-stop shop for lumber buyers looking to make informed purchasing decisions as well as those exploring design optimization with MSR Lumber. Check it out!

LEARN MORE AT:

msrlumber.org

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #139

Adverti$$er

TRUCKS & TRAILERS

Prices good through January 2026

NEW

PRECISION EQUIPMENT TRUSS TRAILER MANUFACTURING

Pricteion! c Redu

IN-STOCK Truss Trailers SALE

THESE TRAILERS ARE READY TO GO! 1

Does NOT INCLUDE FET or Freight ² DOES NOT include Freight

EXTENDABLE TRUSS TRAILERS

1997 Lakeside JDH Trussmaster 48-ft Rolloff Trailer 1997 Lakeside JDH Trussmaster 48-ft rolloff trailer features 5th-wheel connection, sliding tandem axle, locking split rollers, and hydraulic lift neck. Current DOT inspection valid through 1 October 2025. 60% brakes remaining. Six tires at 50% tread remaining and two tires at 40% tread remaining. 68,000 GVWR. $11,997 NOW $8,9978 FOB IA As-is, Where-is Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2004 Commercial 40' Roll-Off Trailer • GVWR: 40,000 Lbs • Dual Axle, Dual Wheel • Hydraulic Tilt (New battery and hydraulic pump in 2025) • 12,000 Lb Heavy Duty Winch • Lighty used over the last 2 years $23,900 FOB UT Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Th e

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Like Money in the Bank. Service you can count on! PHONE: 800-289-5627

2014 Precision 48′ Roll Off Trailer (R157) 2014 Precision 48′ roll off trailer features tandem axle, fifth wheel connection, locking rollers, ABS brakes, and hydraulic lift neck. Estimated 50% tire tread remaining. $17,990 FOB WI Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Pricteion! c Redu 1990 Wabash 48' - 77' Roll off trailer • Certified for highway • 70% rubber • New 5th wheel • Newer undercarriage • New rear bumper • New wiring • Annual inspection report completed on 9/19/24 - good for 1 year. Asking $19,500 NOW $14,500 M.P.B. Builders 920-748-2601 www.mpbbuilders.com

(2) - 38’-53’ Includes FREE Headache Rack & Large Toolbox - $65,6701 (4) - 42’-60’ Includes FREE Headache Rack & Large Toolbox - $68, 9701

53’-80’ EXTENDABLE TRUSS TRAILER (T-1420) Lift Axle, FREE Toolbox and Headache Rack - $81,3411

GOOSENECK TRUSS TRAILERS

Pricteion! c Redu 32’ Gooseneck (T-1381) - FREE Top Roller - $49,485² 32’ Gooseneck (T-1382) - FREE Top Roller - $49,485² 36’ Gooseneck (T-1384) 12K Axles, FREE Top Roller - $51,823² 36’ Gooseneck (T-1385) FREE Top Roller - $50,515²

2021 Big John Extendable Truss Pole Trailer 2021 Big John peak down extendable pole trailer. Transports up to 60′ peak down trusses with a retracted length of 35 ft. O.A., and an extended length of 45 ft. O.A. Adjustable in up to 2 ft. increments. Outer tube frame is 8″ sq. tub and inner frame is 6″ sq. tub. Features 2 axles with anti-lock brake system and parking brakes on both axles. Trailer features air ride suspension with dump valve and 2 speed landing gear. $23,890 NOW $17,490 FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

All of our Trailers come with a 2 Year Warranty and are custom built. We use blast prep for our powder coat prime and paint system, air-ride suspension and we now offer Galvanized Rollers as an option. We build 38’-53’, 42’-60’, 50’-70’ and 53’-80’ Extendable Truss Trailers, 26’, 32’ and 36’ Gooseneck Truss Trailers (Split Truss Available as well on Goosenecks) and 40’, 48’, and 53’ Standard Truss Trailers.

You Can Truss our Truss Trailers!

Quality American Made Truss Trailers

Call Bryan Shinn today to purchase one of the trailers listed above or to get a Quote and have us build a NEW Truss Trailer for you call or email -

Bryan Shinn - Sales Manager 701-941-2017 or 1-800-237-5161 bryan.shinn@precisionequipmfg.com

Read/Subscribe online at www.componentadvertiser.com

sales@precisionequipmfg.com FAX: 800-524-4982

Expert Advisement for Wood Component Manufacturing Lean Best Practices

Labor Time Studies

Full/Non-Automated

Building Designs

Across All Areas — Manufacturing, Sales, Design, and Administration √ Productivity Improvement for every departments.

√ Reliable Proven Time Units — R.E., S.U., Work Minutes. √ Employee Optimization — reduce costs, turnover, & vacancies. √ Equipment & Facility Design Recommendations for maximum

efficiency.

— John Hall, Mathew Hall Lumber

www.todd-drummond.com

— Ryan Lodermeier, Kamloops Truss Ltd.

todd@todd-drummond.com

(603) 748-1051

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #141

TRUCKS & TRAILERS

Th e

Component Manufacturing dverti$er

Pricteion! c Redu

Serving the Structural Building Components Industry

Used - 2014, R157 48” Roll -Off Precision Trailer Tandem Axles | Air Ride Suspension : Air Operated Load Control, Air Operated Pin Locks | Mesh Between Rollers | Beaver Tail | Strap Locks and Winches | LED Lighting | 11.4 Ton Self Contained Power | (1) Heachache Rack $17,500 NOW $10,500 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com/equipment/ trailers

Used - 2014, R156 48” Roll -Off Precision Trailer Tandem Axles | Air Ride Suspension : Air Operated Load Control, Air Operated Pin Locks | Mesh Between Rollers | Beaver Tail | Strap Locks and Winches | LED Lighting | 11.4 Ton Self Contained Power | (1) Heachache Rack $17,500 NOW $10,500 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com/equipment/ trailers

2015 JLG G10-55A Telehandler Lift • 10,000 LB Capacity • 55' Lift Height • 4 Wheel Drive • 3 Way Steer • 72" Fork Carriage • 60" Pallet Forks • Foam Filled Tires • Cummins QSB 4.5 Turbo Diesel • 4,350 Hours $59,900 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Like Money in the Bank. Service you can count on! 2004 and 2005 Pratt 53' Roll-Off Trailers Hydraulic Front End Sliding Tandems Roller Locks Winches and Straps Headache Rack Tool Box Several cross member have rust holes and need to be replaced $12,500 Each or $24,000 for Both Trailers Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2018 A-Nu-Prospect Galvanized 42 to 60 Stretch Roll-off Trailer 2018 A-Nu-Prospect 42 to 60-ft stretch roll-off trailer, fully galvanized chassis, with Anti-lock Brake System (ABS), sliding tandem axles, air-controlled suspension release for unloading, 11 gauge galvanized floor plate. Rollers: galvanized 5″ x 3/16″ x 98 3/4″ tubing, 24″o/c hydraulic lift neck with a 12 volt DC pump, onboard battery. Roller Locks: Air-powered, 8 position ratchet style for quick and hands-free release. Controls: Mounted roadside at landing gear. Lights: LED, galvanized head rack. Straps: Sliding winches complete with straps and “D rings” to attach to curbside “J-hooks”. Fold-away fixed bumper, Mud flaps behind tandem. Current DOT inspection. $57,795 FOB MD Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2002 JDH Trussmaster 36'-51' Stretch Roll-Off Trailer • Hydraulic Lift • Sliding Tandems • Spring Suspension • Roller Locks & Roller Brakes • Headache Rack • Tires are 50% or Better $19,000 FOB CO Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Used Precision 50’-70’ Stretch Trailer Tandem Axles | Air Ride Suspension, Air Operated Load Control, Air Operated Pin Locks | Mesh Between Rollers | Beaver Tail | Strap Locks and Winches | LED Lighting | 11.4 Ton Self Contained Power Unit | (1) Heachache Rack $27,500 NOW $25,500 Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com/equipment/ trailers

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Read/Subscribe online at www.componentadvertiser.com

2000 Haulin 36' Truss/Panel Roll-Off Trailer • Bed Length: 36' • GVWR: 26,000 Lbs • Battery Operated Hydraulic Tilt • Electric Brakes • Locking Rollers • Trailer Inspection is current • One location needs steel plate/weld repair (reference photo) $19,900 NOW $10,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2014 Precision 48′ Roll Off Trailer (R156) 2014 Precision 48′ roll off trailer features tandem axle, fifth wheel connection, locking rollers, ABS brakes, and hydraulic lift neck. Estimated 50% tire tread remaining. $17,990 FOB WI Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Pricteion! c e R du 1990 Wabash 48'-68' Stretch Roll-Off Trailer • Slanted Profile • Hydraulic Dovetail (No Hydraulic Front End) • Fixed Tandems • Roller Locks • Painted, New Brakes and New Roller Bearings in 2019 • Last Used in 2020 $8,750 NOW $7,000 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

CAN BE RETROFIT TO UPGRADE MOST LEGACY TRIAD TABLES, TOO!

ext. 133

Find us on YouTube!

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #143

MISC.

New Heavy Duty Lift Cart 2023 Triad Flow Through Component Nailer • Assembles Trimmers, Partition Leads, Corners, Headers, Ells, Jack Studs • Length Capacity: 10'-2" • Clamp Opening: 3" x 3" to 12" x 12" • Vertical & Horizontal Clamping Pressure: 300 Lbs at 100 PSI • Foot Pedal Control • On/Off Switches for Each Nail Gun • Pop-Up Stop • Nail Trays • 10' Infeed & 10' Outfeed Roller Conveyor with Stands • Excludes Nail Guns $19,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Pricteion! c e R du

NEW!

Champion Valve Plus Compressor Champion Valve Plus – Reciprocating twostage compressor, model 7.5–V80E, with Eaton controls, 7.5 HP motor, 80 gal vertical tank, rated for 22 cfm @ 175 PSI. 208/230/ 460 volt, 3 phase electrical required. $2,495 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com

• 60" x 72" Base • 10" Fixed & Swivel Casters • 2 Vertical Standards and Cart Blocking for Fork Lift Loading • EZ-Set Pneumatic Height Setting

$9,520 FOB SD 800-382-0329 | www.wasserman-associates.com

Triad 20' Power Chain Conveyor • Foot Pedal Control • 2 Pairs available at $7,500 NOW $6,500 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2006 Rogers 15 HP Compressor 2006 Rogers 15 HP rotary screw compressor model RMC-KIV-15-100, reconditioned in 2021. 125 PSI, 8,100 hours. 460 volt, 3 phase electrical required. $16,997 FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com PHONE: 800-289-5627

• Auto Indexing (as material is removed) • 6,000 Lb Capacity • White Powder Coat Finish (Optional Custom Colors) • Made in the USA with USA Steel

NEW! 2023 Atlas Copco Compressor in Container Housing 2023 Atlas Copco type G7FF rotary screw compressor with internal dryer and external tank. Compressor capacity is 145 PSI, has a 10 HP motor, external air tank includes bleed valve and manual output valve. System comes contained in a custom shipping container with locking entry door, thermostat controlled electric fans, throughwall induction vent grills, interior lighting, electrical panel and utilities for a second compressor. Container size is 8′ width x 10′-6″ long x 8′-8″ height. Hours as of 19 September ’24 were 986. 480 volt, 3 phase / 120VAC electrical required. $34,490 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com

New Sub-Component Nailer • • • • • • • •

Assembles Trimmers, Jacks, L’s, Channels & Headers 2x4 and 2x6 Capacity Remote Fire & 3-Way Clamping Staggered or Straight Line Nail Pattern Squaring Stop Foot Pedal Control Reserve Air Tank 5’ Infeed & Outfeed Roller Conveyor

$29,800 FOB NE 800-382-0329 | www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

By Simpson Strong-Tie Staff

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #144

Do What You Can Day 2025: Employees Supporting Communities Worldwide

ith more than 25 participating locations, employees contributed more than a thousand volunteer hours across the globe, making a meaningful impact on the people and organizations they served. Each year, Do What You Can Day reminds us that even small actions, when taken together, can create meaningful change. This annual event honors our founder Barclay Simpson’s guiding principle: “We’re all connected in some way and are all part of a greater community … Help out your neighbor, make time for others, do what you can.” Following are some highlights from our participating locations that served and supported their communities in an array of give-back initiatives.

Across the US Atlanta, GA: 14 employees at the Kennesaw warehouse dedicated their time to building benches for a local park and donated dog treats and toys to the Atlanta Humane Society. Columbus, OH: The Columbus branch embraced the spirit of Do What You Can Day with a variety of hands-on projects supporting their local community. Employees built bikes for underserved youth through Toys for Tots, crafted DIY pet toys for Columbus Humane, created bracelets and IV bag decorations for cancer patients at Ronald McDonald House, and assembled candy bags for care packages with Soldiers’ Angels. Each activity reflected teamwork, creativity and compassion, demonstrating how small acts of kindness can have a real impact across many communities.

Building benches in Atlanta, GA (above) and building homes in Denver, CO (below)

Denver, CO: Simpson team members in the Denver area built modular homes to support Habitat for Humanity of Denver at their Boulder facility, an effort that totaled 60 hours of volunteer collaboration. Gallatin, TN: Gallatin employees supported Sleep in Heavenly Peace’s mission to ensure that no child sleeps on the floor by building 30 beds for youth in need. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #145

Making military care packages in Inner Grove Heights, MN

Inner Grove Heights, MN; Jessup, MD; and Enfield, CT: Team members from the Inner Grove Heights, Jessup, and Enfield locations worked together to make military care packages a little bit sweeter for active service members by creating candy bags to place inside these heartfelt gift packages, which supported the Soldiers’ Angels nonprofit. High Point, NC: An engaged group of 20 team members at the High Point warehouse supported DWYCD by collecting necessary school supplies for Greenwood Christian Academy. Jacksonville, FL: 28 employees at the Jacksonville warehouse packed 300 care packages for the Northeast Florida Women & Children’s Homeless Shelter. Lafayette, IN: Lafayette employees supported multiple nonprofits in the community, including the Wabash River Enhancement Corporation, Niches Land Trust, Salvation Army of Lafayette, and Food Finders Food Bank Fresh Market. Their collective impact efforts involved a variety of volunteer tasks ranging from winter coat distribution and grocery store stocking to trail maintenance and fence removal. McKinney, TX: In support of the Austin Street Center, a homeless shelter in Dallas, TX, 117 employees created Welcome Home baskets containing essential supplies for community members experiencing homelessness to help Supporting nonprofits in Lafayette, IN them transition into a new home of their own. Additionally, the McKinney branch packaged over 500 nutritional snack bags for the shelter to distribute to those in need. Food items were also donated to the McKinney Free Little Pantry to aid those affected by the reduction in SNAP funding. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #146

Mobile, AL: 20 employees at the Mobile warehouse packed 200 individual drawstring backpacks filled with hygiene items and donated them to the Waterfront Mission, a nonprofit that helps people transition out of homelessness, poverty and addiction. Pleasanton, CA: Over the course of two full build days, 25 employees dedicated a collective 150 volunteer hours to support Habitat for Humanity East Bay / Silicon Valley’s affordable housing development, Sequoia Grove, in Hayward, CA, which is Habitat’s greenest development to date. Helping Habitat for Humanity in Pleasanton, CA Remote Employees: A group of remote employees contributed 30 hours of collective volunteer work by participating in an innovative and collaborative business challenge developed by SuitUp to inspire and brainstorm with high school students from a Title I school. Participating employees coached and judged student pitches related to disaster relief and recovery, which is one of Simpson’s core giving priorities.

Riverside, CA: Employees from our Riverside branch assembled hygiene kits for Warrior for Children, a nonprofit that provides care and connection for youth experiencing trauma. The kits will go to foster children in need, offering everyday essentials and a reminder that their community cares. Oxnard, CA: Oxnard employees assembled 15 hygiene bags for the Rescue Mission Alliance’s Lighthouse for Women and Children, which focuses on support for their transition out of homelessness to stability. Chandler, AZ: Chandler employees supported a local nonprofit, House of Refuge, Inc., by assembling kits for families experiencing homelessness to navigate their transition to stability, healing, and hope. Las Vegas, NV: Eight Las Vegas team member created hygiene kits for the Children’s Foundation of Las Vegas, which furthers their work to address the unmet needs of children who are in and have aged out of foster care in Clark County.

Helping children in Las Vegas, NV

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #147

Kapolei, HI: In support of Child & Family Service, the Kapolei team assembled children’s tote bags with an assortment of essential hygiene and creative crafts items. Their work drives impact for Child & Family Service as they work to strengthen families and foster healthy development of children across the state of Hawaii. Stockton, CA: The Stockton branch hosted its annual Do What You Can Day in a trade show-style format, connecting employees with five nonprofit causes focused on family support, basic needs, and global Supporting families and children in Kapolei, HI impact. Together, employees assembled 400 hygiene kits, 40 family enrichment packs, and 100 water filters; donated 21 cases of diapers and a bin of food items; and contributed a total of 320 volunteer hours. The event provided a meaningful opportunity to learn from local partners, see their work firsthand, and make a lasting difference in the community. West Chicago, IL: 75 West Chicago employees contributed hundreds of hours creating 102 kits for local underserved children through the EduCare Foundation, an educational and youth-focused nonprofit that provides afterschool programming.

Canada Brampton, Ontario, Canada: Brampton employees created care packages for the Family Transition Place, a shelter supporting women’s journeys to stable housing. Calgary, Alberta, Canada: Calgary employees volunteered at the Calgary Drop-In Centre, a nonprofit organization that supports community members experiencing or at risk of homelessness through housing, shelter, and health programs. Pitt Meadows, BC, Canada: Pitt Meadows employees built kits for NICU patients and parents in support of the British Columbia Children’s Hospital.

Supporting the community in Calgary, AB Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #148

Adverti$$er

Highlights from global branches outside of North America

Australia: Our Simpson Strong-Tie Australia team, joined by two key business customers, volunteered at Foodbank Australia’s Glendenning warehouse to pack 660 Christmas hampers — nine tons of food providing more than 16,000 meals for families in need. Volunteers worked along the packing line, gaining firsthand insight into food insecurity and making a meaningful contribution to the community. This hands-on effort reflects our ongoing commitment to giving back and supporting those who need it most. Volunteering in Australia

Chile: Team members in Chile put our value of ‘Give Back’ into action by preparing and delivering aid materials to Albergue Gandarillas — Puente Alto, a shelter that supports individuals experiencing homelessness. The visit offered a meaningful opportunity to connect with residents and reflect on the power of compassion: “Giving doesn’t always mean having a lot; it means doing what you can to make a difference.”

Giving Back in Chile

Switzerland: Members of the Switzerland team spent a full day supporting the Swiss Wrestling and Alpine Festival (ESAF) by volunteering at a food stand, serving fresh sausages to visitors, participants, and fellow volunteers. This iconic event, held every three Volunteering in Switzerland years for 130 years, draws around 350,000 attendees and relies on over 8,000 volunteers to bring the festival to life. Our colleagues’ efforts helped ensure the event’s success, with all proceeds and tips being donated to charitable causes. Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #149

Germany: Simpson employees based in Germany participated in a variety of renovation-related service work to support local nonprofit organizations. United Kingdom: A group of team members from the United Kingdom spent the day at Birds Bush Primary School in Tamworth, refreshing the school’s outdoor spaces with new planters, fresh paint, and a creative new mud pit for students to enjoy. The project brought together teamwork and community spirit to create spaces that inspire children to play, learn, and grow.

Building community in the United Kingdom

Viet Nam: In October, Enterprise Service Viet Nam (ESVN) embodied the spirit of giving by supporting two meaningful organizations: Dak O Commune in Dong Nai province and two care homes in Cu Chi, Ho Chi Minh City. Team members organized a traditional mid-autumn celebration for children in Dak O, distributing 400 mooncakes, 86 essential packages, and a donation to the local school, Giving Back in Viet Nam while also building a small playground and providing clothes and gifts to families in need. Later in the month, ESVN volunteers visited the Congregation of Mother of Charity Care Home and Thien Phuoc Nhan Ai Orphanage, delivering food, milk, hygiene products, health insurance cards for elderly residents, and donations to support ongoing care. Thank you to all employees who participated in Do What You Can Day 2025. Your time and effort helped support communities across the globe and continued our company’s commitment to giving back. We look forward to carrying on this work for many more years to come.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #151

Adverti$$er MISC.

6 Chain Live Deck 6 Chain Live Deck 20’ Long x 17’ Wide Foot Pedal Control 240 Volt / 3 Phase $9,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Electrical Supply: Motor: Highly Accurate: Stop Rail: Stops: Stop Blocks: Internal Components: Dimensions:

If you are looking for the fastest, mist consistent way to measure and cut your product, then the Hain Measuring System (MEA) is your answer. The MEA changes from one length t any length instantly, up to 60’, without changing the operator’s position on the line. It is also highly accurate (+- .010) and quickly moves from one length to the next in seconds. The MEA is designed for quick and easy setup and is simple to use. Even a first time user will be productive with little or no training required. It can adapt to any saw and can be mounted to any surface so that you can integrate the MEA with your existing setup. The MEA is versatile allowing “left” or “right” handed operation and measurement in “feet and inches” or “inches” depending on your preference. The MEA is also available in a “Skid Mounted” version.

theHAINCOMPANY 6125 Enterprise Drive, Unit 92 | Diamond Springs, CA 95619 530.295.8068 | sales@thehaincompany.com PHONE: 800-289-5627

New Monet Power Deck Infeed Decks Heavy-duty, 5-chain feed system to bring material to the infeed of the component saw. 16′ wide x 20′ long x 36″ high. Transfers 6′ to 20′ lumber lengths. Option for 6-arm Power Deck available at an additional cost. Features auto-feed advance, foot pedal override forward and reverse, variable speed control, double bearing construction, softstart and soft-stop and e-stop cable. Base price shown. 480 volt, 3 phase, 15 Amp electrical required. (Prices start at $31,000.) Wood Tech Systems 765-751-9990 www.woodtechsystems.com

New Handle Bar Router • Metabo HPT M12XE Variable Speed Router • Steel Handle Bar Frame with Makita Switches • 3 1/4 HP / 120 Volt / 1 Phase / 15 Amp • Includes 2 Router Bits $3,000 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

SL-Laser Model ProDirector 7 Projection System Improved model ProDirector 7, green-color laser projection system from SL-Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface for faster setup and fabrication times. New employees are productive more quickly, with less training required. Each laser head provides 21′ projection length (at 15-foot ceiling heights). New model PD7 projector heads are smaller in size than previous models, have diodes that are easier than ever to swap out and maintain, and project an even clearer line onto the building surface. System includes projector heads, cables, mounting hardware for attachment to customer’s structure, factory installation, training, and options for computer controls. Works with each connector plate manufacturer’s design software. Modular nature of the laser heads allows for easy future expansion of system length. 120 volt, 1 phase. FOB NC Wood Tech Systems 765-751-9990 www.woodtechsystems.com

2005 NAPA 15 HP Compressor 2005 NAPA rotary screw compressor, 15 HP, reconditioned in 2021, 25,887 hours, model H80158. 460 volt, 3 phase, 20 Amp electrical required. $8,991 FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Wood Tech Systems is a registered trade name of Wood Truss Systems, Inc.

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Equipment Wanted! Saws

Trucks & Trailers

• Automated Component & Linear Saws (2010 & Newer) • Monet DeSauw or TimberMill Manual Component Saws • Floor Web Saws • Spida (Apollo) Saws with Truss Automation • Bunk Cutters

Modular Equipment • Pacific Automation or MiTek Mobile Home Press

Contact Wasserman & • Roller Gantry & Hydraulic Associates for a Fair Market Press Systems Value Assessment of your • Finish Rollers Used Equipment • Truss Stackers Floor Truss Machines Lumber Splicers Jack Tables C-Clamp Presses

Operational, Needs Work, and Parts Only equipment will be considered!

800-382-0329 | www.wasserman-associates.com

The

NEW!

• Stretch Roll-Off Trailers • Gooseneck Roll-Off Trailers

Truss Equipment

• • • •

Adverti$$er

January 2026 #18318 Page #153

$50,500 FOB QC New ASI Ink Jet Plate Marker • Automated Wall Panel Parts Cutting & Marking as directed by Wall Panel Design Software Output • 20' Roller Conveyor with Servo Motor Controlled Length Stop/Plate Pusher • 10' Infeed Roller Conveyor • 24" Lenovo Touch Screen Computer (Windows 11 Pro OS) • ASI Basic L Plate Cutting/Marking Operating Software • 4 Head Ink Jet Plate Marker (marks 2 plates on edge)

• 110 Volt / 1 Phase • Includes Onsite Installation & Training • Excludes Saw & Dust Collector • Add $2,250 for Dewalt Sliding Miter Saw with Saw Support Table • Other Saw Options Include: Existing Saws, ASI Radial Arm Saw, Lauderdale Hamilton Up Cut Saw & Vista Angle Boss Saws • Video available upon request

800-382-0329 | www.wasserman-associates.com

JobLine.com

Truss Design Manager(s) MiTek software J15370

NEW!

Lead truss design teams in Central Florida. In-office role using MiTek software. Full-time with strong benefits, relocation assistance, and leadership opportunity. Two locations, two positions. One is in a trendy location, the other is in a great place for avid outdoor enthusiasts. I have worked with this client for years and they are expanding! In addition to another truss plant, they are adding a wall panel plant. We have additional job opportunities for Remote Truss and Wall Panel Designers. Please contact me for additional information. For Additional Information email: twm@thejobline.com PHONE: 800-289-5627

Builders Automation Stair Stringer Router More information here: http://goo.gl/mSsxyY 800-382-0329 | www.wasserman-associates.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

NEW!

BAM Stair Wedge Saw Builders Automation Machinery (BAM) model 2220, stair wedge saw station automatically produces wood wedges used to lock stair treads and risers into slots cut into the stair stringers…

Price based on configuration FOB FL

765-751-9990

www.woodtechsystems.com

January 2026 #18318 Page #154

Adverti$$er

NEW! BAM Staircase Assembly Clamp Builders Automation Machinery (BAM) staircase assembly clamp, model 2210, accommodates up to 20 foot long stringers with a maximum width of 54″…

Price based on configuration FOB FL 765-751-9990

www.woodtechsystems.com MISC.

BAM Pre-Hung Door Machine Titan Series Builders Automation Machinery (BAM) Titan series pre-hung door machine. Designed to produce between 150 and 250 doors per day. Multi-function door machine capable of doors 1'-6″ to 4′-0″ in width, and both 6′-8″ or 8′-0″ door heights. Processes both 1 3/8″ and 1 3/4″ thick door slabs. Machines the door, hinge jamb and strike jamb all at the same time. Capable hinge sizes include 3 1/2″ x 3 1/2″, 4″ x 4″, 4 1/2″ x 4 1/2″ with 5/8″ radius. Cycle time with flush hinge routing is 45 seconds. 10′ long x 7′-6″ wide footprint. Shipping weight 4,000 lbs. More information Click Here Price based on configuration

NEW!

765-751-9990 PHONE: 800-289-5627

FC Curtis CA Series Compresso FC Curtis model E-15 two-stage, piston drive, air compressor with dryer and 80 Gal. horizontal storage tank, 175 PSI, and 5 HP drive motor. Sold for $4,200 new. 480 volt, 3 phase electrical required. $2,495 FOB AZ Wood Tech Systems 765-751-9990 www.woodtechsystems.com

NAPA 25 HP Compressor with Dryer (BU-1) 2005 NAPA 25 HP rotary screw compressor model 8025B, with Rogers CLS46 dryer. Compressor reconditioned in 2021. 125 PSIG, 8,292 hours. 460 volt, 3 phase, 29 Amp electrical required. $11,997 FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

www.woodtechsystems.com Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #155

MISC.

EMSI Teeter Cart Width – 46” / Length – 73” / Load Capacity – 2850 pounds / Pneumatic tires – 14.5 inch / Maximum utility in truss plants, panel plants, and lumber yards / Quick Assembly by bolting parts together / All hardware is supplied / Upright 2 x 4’s not supplied / Medium duty tires rated at 1500 lbs each are included. Call for Price Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

Used - Quincy 25 Horsepower Screw Compressors (2x) Taken from service | Optional: Refrigerated Air Dryer - $500 $3500 each Eide Machinery Sales, Inc. 612-521-9193 www.eidemachinery.com

NEW GALVANIZED STEEL STRAPPING 1 1/4" wide x .035 thick. $95 per coil. $1,900 per skid (21 coils). FOB PA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

AMI Industrial Floor Carts AMI's industrial floor trucks (material carts) are designed of hardwood construction, fitted with space-age phenolic, roller-bearing wheels, and ball bearing swivel casters for strength and durability. AMI's phenolic wheels resist shock without chipping. They are non-sparking, non-marking, and can be operated continuously between -50℉ and 260℉. They are unaffected by grease, oil or debris on your shop floor. Series "B" AMI Industrial Floor Truck

2018 Wasserman Sub-Component Nailer • Assembles Trimmers, Jacks, Corners, Ells, Partition Leads, Channels & Headers • 2x4 and 2x6 Capacity (double pass on headers to 2x10) • Remote Fire & 3-Way Clamping • Staggered or Straight Line Nail Pattern • Squaring Stop • Foot Pedal Control • Reserve Air Tank • 5' Infeed & Outfeed Roller Conveyor • (2) Duo-Fast DF350S Strip Nailers $19,900 NOW $18,900 FOB ND Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Our swivel casters are precision built with perfectly aligned raceways. All cold-form parts are made to exacting tolerances from heavy-gauge steel, and are hardened for severe service and long wear. Series B-4 carts include four casters, one at each corner, to prevent "tri-cycling" of long lumber loads. S t a n d a r d M o d e l s Av a i l a b l e Max Load Weight (lbs.) 2748 27" x 48" Series "B" & "C" 2500 3248 32" x 48" Series "B" & "C" 2500 3260 32" x 60" Series "B" & "C" 2800 3660 36" x 60" Series "B" & "C" 2800 3672 36" x 72" Series "B" 4000 4072 40" x 72" Series "B" 4000 3696 36" x 96" Series "B" 4000 4896 48" x 96" Series "B" 4000 *Other models and sizes are available on request. FOB NC. Wood Tech Systems 765-751-9990 www.woodtechsystems.com

SL-Laser Truss Projection Heads • September 2023 SL-ProDirector 7 Laser Projection Heads (3 Available) • 9,900 - May 2019 SL-ProDirector 6 Laser Projection Head (1 Available) $14,000 FOB OR Wasserman & Associates 800-382-0329 www.wasserman-associates.com 2022 Sullair Rotary Screw Air Compressor • Model 1112E • 43.7 CFM at 175 PSI • 460 Volt / 3 Phase $4,900 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Hain Vent Block Drill Hain Company Vent Block Drill. From the OEM’s website, “The Vent Block Drill is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks. By simply inserting a block, the VBD has one button to press and the rest is automatic. It can drill 1, 2, 3, or 4 holes and you can adjust the block size in 15 seconds or less. The VBD processes each job quickly and tests have shown that it will produce in excess of 360 vent blocks per hour. Operation is simple and even a first time user can begin drilling blocks in a matter of minutes. The machine is enclosed for safety and the back cover can easily be removed for maintenance.” 5 HP motor, block sizes 2×4 through 2×12 on center drill holes, or 2×14 off-center drill holes. Carbide tipped drill bits. 10 ga. aluminum construction. 60″ x 60″ x 33″ height. 100 PSI air required. 440 volt, 3 phase electrical required. Net weight 750 lbs. $9,995 FOB OR Wood Tech Systems 765-751-9990 www.woodtechsystems.com

Read/Subscribe online at www.componentadvertiser.com

Pricteion! c e R du

2020 Ranger RS Lumber Retrieval System • Fully Automatic Laser Guided Lumber Retrieval System • 5 Lumber Carts (6' to 20' Lumber) • Vertical Dividers for Magazine Carts • Vacuum Pick Head System • Perimeter Safety System (Light Curtains, Fencing & Gate) • 50' x 28' Footprint • 5 Extra Custom Built Lumber Carts • Designed to fit Monet Deasuw DeRobo Saw • Available July 2024 • Video available upon request $94,900 NOW $79,900 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Pricteion! c e R du

Hain 210" Powered Measuring System • Powered (1 Phase) Measuring System • Inches System (21 Stops at 10" Centers) • 15' Roller Conveyor with Stands $6,225 NOW $2,500 FOB CA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

The Stair Boss PRO is the fastest AND most versatile stair stringer router in the industry! Nearly 3x more efﬁcient than the original (and highly successful) Triad SSR (Smart Stair Router), making you 3 times more productive. With the Rapid Transport System, the stringers move horizontally and are in nearly constant motion. With this system, there is no need to unclamp, reposition, and reclamp the stringer, increasing both speed and accuracy. Creates a perfectly matched PAIR of stringers. LVL or dimensional lumber

See them run (side-by-side) on YouTube: https://tinyurl.com/36vh3ryk

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #157

Adverti$$er

Door } Stair } Window Machines

RUVO MODEL 1300 DOUBLE END DOOR TRIM SAW $4,250 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

BAM “Ovation” Door Machining Center (DMC) New Builders Automation Machinery “Ovation” series, door machining center (DMC). Fully programmable, two-stage door machine featuring (27) axes of operation. Can be specified with either two or four front machining heads. Machine is side-eject, direct-drive with helical gear racks and gear protection from dust. The door loader is driven by an absolute encoder; no stepping motors, belts or exposed ball Used - Auto Omni Control Panel Set screws are used. Control Panel Set for 5 Head Auto Omni More information Click Here Component Saw | Complete with Control Price based on configuration Cards | Parts Machine Wood Tech Systems $500 – Make Offer 765-751-9990 Eide Machinery Sales, Inc. www.woodtechsystems.com 612-521-9193 www.eidemachinery.com

We create transformative website and app experiences Since 2006, we've been helping businesses of all kinds build their online presence. We make websites and software for the construction industry to empower companies to reach a wider customer base and engage their audiences. Companies all around the world work with us to make websites and apps that people actually want to use. Reach out to Wolf X Machina if you're a business and you want a website that actually drives results.

WOLF X MACHINA www.wolfxmachina.com info@wolfxmachina.com

Pricteion! c Redu Sweed Scrap (Band) Chopper with Stand 1/2 HP Motor (115/208-230 Volt) $1,900 NOW $1,750 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

JobLine.com, inc.

The

800-289-JOBS

New Rack Cart • 44" x 77" Base • 10" Casters • 4 Vertical Uprights with 32 Adjustable Arms • 3,000 Lb Capacity • White Powder Coat Finish (Optional Custom Colors) • Made in the USA with USA Steel $2,210 FOB SD Wasserman & Associates 800-382-0329 www.wasserman-associates.com

The

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Time To Hire? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com

NEW!

BAM Door Loader, Model 2001

Builders Automation Machinery (BAM) door loader, model 2001. Allows you to stack door slabs horizontally and feeds them into a horizontal door machine like the BAM model 996E-TS. Mechanically adjusts door stack height vertically as slabs are fed into machine. Clamp automatically adjusts to type and size of door slab: steel, solid-core or hollowcore, from 6-ft to 8-ft heights. Electronic, programmed controller manages the loading process. Loader positions the door stacks adjacent to the door machine infeed to save effort of the operator. Pneumatic motor and heavy-duty drive train provide dependable continuous use. Cycle time approximately (30) seconds per loaded door slab. Footprint approx. 10′ x 10′ x 11′. Weight 2,000 lbs. 120 volt, 1 phase, 15 Amp electrical required. 120 PSI at 20 CFM (1/2″ ID line min.) air required.

Price Based on Configuration

STRICTLY CONFIDENTIAL!

765-751-9990 PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

www.woodtechsystems.com FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

By Sean Shields, SBCA Director of Marketing

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #158

Meetings that Move the Industry Forward: Why OQMs Belong on Your Calendar

omponent manufacturing is a dynamic business. Market conditions, building codes, supply-chain pressures, and labor needs are continuously shifting, requiring constant problem-solving and innovation. In this environment, staying informed and connected is essential. SBCA’s Open Quarterly Meetings (OQMs) provide exactly that advantage. These gatherings are more than routine check-ins, they are collaborative, forward-looking events that have proven to be effective at equipping component manufacturers (CMs) with the insights, relationships, and strategic perspective needed to succeed and thrive. At their core, OQMs bring together leaders from every corner of the structural components industry: component manufacturers, framers, equipment suppliers, software partners, and industry veterans. This unique mix of viewpoints creates a rare opportunity to understand emerging challenges and pursue solutions as an industry, not as individual businesses responding alone. For manufacturers navigating evolving building material markets, workforce shortages, and pressure to deliver more value with fewer resources, this collective perspective is invaluable. Each OQM typically features deep-dive discussions on technical, operational, and regulatory issues shaping component manufacturing. Attendees hear directly from SBCA committees, individual members, and staff about ongoing efforts to identify and share best practices, improve safety, develop technical guidance, and advocate for fair and consistent enforcement of building codes. No matter the issue, CMs and suppliers alike gain clarity that can be brought back to their businesses and translated into better decisions, more efficient operations, and superior products.

Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #159

OQMs also provide an open environment for sharing practical experience. CMs consistently report that some of the most impactful takeaways from these events come from conversations with peers during meals and happy hours. They gain insight into how others across the country are adapting to automation, structuring design departments, improving quality assurance, or supporting framers in the field. These peer-to-peer exchanges frequently turn into real-world solutions that help reduce problems in the plant, prevent jobsite headaches, and improve profitability. Just as importantly, OQMs are where the industry’s advocacy efforts take shape, whether that’s to builders, inspectors, or lawmakers. Through SBCA OQMs, CMs have a direct voice in identifying priority issues and guiding the association’s outreach efforts. By participating, CMs and suppliers together strengthen the industry’s ability to influence policies and practices that protect innovation, support offsite construction, and promote safe, efficient building practices. Ultimately, attending SBCA’s OQMs is an investment in the long-term health of a business and the component manufacturing industry as a whole. These gatherings ensure anyone who attends stays ahead of industry trends, contributes to the development of standards that affect daily operations, and builds meaningful connections with industry experts who share the same challenges and ambitions. Learn more about SBCA OQMs at https://www.sbcacomponents.com/open-quarterly-meetings and mark your calendar for this year’s OQMs: • • •

February 24-26 – Austin, Texas June 9-11 – Bellevue, Washington December 8-10 – Charlotte, North Carolina

We hope to see you there! PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

Calendar of Events

January 2026 #18318 Page #160

JANUARY 2026

January 3–5

BLD Connection 2026 BizCon South

Altoona, IA

January 13–15

Metal Construction Assoc (MCA) Winter Meeting

San Antonio, TX

January 19–21

BLD Connection 2026 BizCon North

St. Cloud, MN

January 21

Tennessee Truss Mfrs Assoc (TTMA) Meeting and TopGolf

Nashville, TN

January 28

SBCA of the Capital Area Chapter Meeting

Herndon, VA

FEBRUARY 2026 February 5–7

Orgill 2026 Spring Dealer Market

Orlando, FL

February 9–11

University of Texas Building Professional Institute (BPI)

Houston, TX

February 11–12

BUILDEX 2026

Vancouver, BC

February 11–14

American Institute of Architects (AIA) Leadership Summit 2026

Washington, D.C.

February 11–12

Bldg Mat Suppliers Assoc (BMSA) Learning Exchange & LBM Expo

Hickory, NC

February 17–19

Natl Assoc of Home Bldrs (NAHB) Intl Builders Show (IBS)

Orlando, FL

February 23–27

EduCODE 2026

Las Vegas, NV

February 24

BLD Connection Wisconsin Connection Conference

Wisconsin Dells, WI

February 24–25

SBCA Component Craft

Austin, TX

February 24–26

Ace Hardware Spring Convention

Louisville, KY

February 24–26

Structural Bldg Components Assoc (SBCA) Open Quarterly Meeting

Austin, TX

MARCH 2026 March 1–4

MFE Leadership Summit

Vail, CO

March 2–4

LBM Advantage Annual Buying Show

Nashville, TN

March 4–5

3rd Annual Mass Timber Construction Summit

Toronto, ON

March 4–5

5th Annual Modular Construction & Prefab Symposium

Toronto, ON

March 6–8

Do it Best & True Value Spring Market

Denver, CO

March 10–12

2026 LMC Annual

Chicago, IL

March 10–13

2026 Lean Summit

Houston, TX

March 11

IDEAS Show 2026

King of Prussia, PA

March 15–18

Build26: AWCI Convention + Expo

New Orleans, LA

March 16–18

North Am Wholesale Lumber Assoc (NAWLA) T-100

Dana Point, CA

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

January 2026 #18318 Page #161

Adverti$$er

Calendar of Events

March 17–19

Intl Wood Products Assoc (IWPA) World of Wood

Colorado Spr., CO

March 18–19

PA Housing Research Center (PHRC) Housing Conference

State College, PA

March 18–20

Associated Builders and Contractors (ABC) Convention

Salt Lake City, UT

March 18–20

Southeastern Lumber Mfrs Assoc (SLMA) Spring Meeting & Expo

Miramar Beach, FL

March 24–26

Atlantic Builders Convention 2026

Atlantic City, NJ

March 26–28

JLC LIVE Residential Construction Show

Providence, RI

APRIL 2026 April 13–24

2026 SBCA European Industry Tour

5 countries

April 15–16

Annual Triad–Ruvo National Trade Show

Alda, NE

April 27–May 1

Southern Pine Inspection Bureau (SPIB) Week of Quality

Pensacola Beach, FL

MAY 2026 May 4–6

Builder 100 Leadership Summit

Dana Point, CA

May 18–19

Frame & Truss Mfrs Assoc of Australia (FTMA) National Conference

Twin Waters, QLD, Australia

May 26–29

Is yourBuilding event onProfessional this list? Email us the details to share. University of Texas Institute (BPI)—North

Irving, TX

Elevate Your Wall Panel, Floor Truss or Roof Truss Manufacturing with 4Ward Design Solutions’ Precision Component Design Services!

Contact

Us PHONE: 800-289-5627

Design@4WardConsult.com

4Wardsolutionsgroup.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

A A

Th e

CComponent Manufacturing OMPONENT MANUFACTURING dverti$ dverti $ er dverti$er

Don’t Forget! Don’t You SawForget! it in the Adverti$ $er YOU SAW IT IN THE

Safety First! Safety Meeting Topics From State Fund CA.

January 2026 May 25th, 2012 #18318 #05144 Page #162 PAGE #27

Adverti$er Use la Cabeza, Póngase el Casco de Seguridad

La cabeza es la parte más importante de su cuerpo. Con ella se piensa, se siente, se habla, se huele y se escucha. Por lo tanto, tiene sentido protegerse la cabeza contra cualquier lesión. La primera línea de defensa contra las lesiones a la cabeza en el lugar de trabajo es el uso del casco de seguridad. El casco protege la cabeza del peligro de caída de objetos y resguarda contra golpes accidentales. El casco reduce la intensidad de cualquier golpe a la cabeza. Resiste y desvía el golpe y distribuye el impacto sobre un área mayor. La suspensión interna del casco actúa como amortiguador. Aún en el caso de que el casco se quiebre o se abolle, absorbe parte de la fuerza del impacto, transmitiéndole menos a la cabeza. También puede resguardar el cuero cabelludo, la cara, el cuello y los hombros contra derrames o salpicaduras.

Use Your Head, Wear Your Hard Hat

Elija el casco más apropiado para el tipo de trabajo que se ejecuta, y sólo use cascos aprobados y fabricados para cumplir con las normas aplicables. Éstos están diseñados para proporcionarle la máxima protección a la cabeza. También es importante asegurarse de que el casco le quede bien. Un casco de la talla correcta proporciona el máximo de confort y protección.

Your head is the most important part of your body. You think, feel, La habilidad del casco de proteger al trabajador depende del talk, smell, and hear with your head. Therefore, it makes sense that you espacio para absorber impactos que la suspensión mantiene entre should protect your head from any injury. la coraza exterior y la cabeza. Por lo tanto, es importante que la Wearing a hard hat is the first line of defense against head injuries on the job. A hard hat can protect your head against the hazard of falling material and guard against accidental bumping. The hard hat softens any blow to the head. It resists and deflects the blow and distributes the impact over a large area. The hat’s suspension acts as a shock absorber. Even if the hat dents or shatters, it still takes some of the force out of the blow and off your head. It can also shield your scalp, face, neck, and shoulders against spills or splashes. Choose the hard hat most suitable for the work being performed and only wear approved hard hats manufactured to meet required standards. These are made to give your head maximum protection. Make sure your hat fits correctly. Hats that fit right provide you with the most comfort and protection. The ability of a hard hat to protect a worker depends on the shock absorbing space between the shell and head by the suspension provided. Therefore, it is important that sweat bands and suspension straps by properly adjusted to obtain the maximum protection. Sunlight and heat can rot the sweatband and straps, so don’t leave your hard hat on the window ledge of your car. Take good care of your hard hat. Don’t drop it, throw it or drill holes in it. Inspect your hard hat every day for cracks, gouges, and frays or breaks in the straps. Colors can be used to identify different crafts and supervisory personnel, and should be encouraged and given consideration when purchasing such equipment. All levels of supervision should set the example by wearing hard hats. Observe and comply with "Hard Hat Area” sites. Remember! A hard hat is a status symbol; it identifies a safe worker, one who believes in and practices safety.

banda y las correas de la suspensión estén ajustadas debidamente para obtener la máxima protección. La luz solar y el sudor pueden podrir la banda y las correas, por lo tanto no debe dejarse el casco bajo la ventana trasera del automóvil. Cuide su casco. No lo deje caer, no lo tire ni le taladre orificios. Inspeccione el casco cada día para asegurar que no tenga grietas, ni surcos y que las correas no tengan roturas ni estén deshilachadas. Se pueden usar colores para identificar diferentes oficios y al personal de supervisión, y se debe tener en cuenta al efectuar la compra de dichos equipos. Todos los niveles de supervisión deben dar el buen ejemplo usando los cascos de seguridad. Observe y cumpla con los avisos de “Área de casco de seguridad” en los lugares de trabajo. Recuerde, el casco de seguridad es un símbolo de prestigio: identifica a un trabajador seguro, uno que practica y cree en la seguridad.

Mylon Stark

605.838.4240 fax 888.519.4130 toll-free 605.220.2342 mobile info@bigpicturesafety.com http://www.bigpicturesafety.com

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions speciﬁcally discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

PHONE: 800-289-5627 PHONE: 800-289-5627

RRead/Subscribe EAD/SUBSCRIBE ONLINE AT www.componentadvertiser.com WWW.COMPONENTADVERTISER.COM online at

FAX: 800-524-4982 FAX: 800-524-4982

The

JobLine

.com

Since 1992

Careers in the Truss, Wall Panel

and Engineered Wood Components Industry

Job Opportunities Available Candidates Services & Products

800-289-5627 www.thejobline.com

JobLine.com, inc.

The

800-289-JOBS www.thejobline.com

job opportunities available Remote EWP Designer New England ID: J15380

WANTED $32-45hr. Plus Bonus Plus Benefits D.O.E

S R E N G I S DE S S TRU Full Time rid

Hyb

ice -Off

te emo

Part Time

Let The JobLine Represent You! We Search our Large Network of Clients Throughout the US and Canada To Find Your Perfect Job

MiTek Multifamily Truss Designer Texas ID: J15378 Plant Manager - Wall Panels - J15375 Central Florida Truss & EWP Design Manager - J15376 Central Ontario Truss Design Manager - MiTek software J15370 Florida Remote Truss Designer J15313 New England Truss Designer J15339 New England Outside Sales - Truss/Panel J15371 Northeast Truss Design Manager - Apline J15366 Texas Light Gauge Steel Truss Designer - Alpine Remote, Hybrid, or South J15374

Strictly Confidential!

Remote Truss Designer - MiTek J15361 Mid Atlantic

See Our Job Postings at www.thejobline.com

Remote Mega-Multifamily Truss Designer J15368 Mid-Atlantic

The

JobLine.com

Truss Design Skills Evaluation

Sales Representative - J15355 Central Ontario Sales Manager - J15373 Southern Alberta In Office or Remote Truss Designer - MiTek Software J15369 Florida or remote in FL or GA

Measures 9 areas of Skills and Experience Compairs Results to National Averages Identify Strengths and Areas For Improvement

Truss Designer - Multifamily/MiTek J15362 TN

Available On-Line

Remote Truss Designer - Alpine Software J15350 Remote

Truss Designer - Multifamily/MiTek J15363 TX

$145 per Exam (Volume Discounts Available)

Truss Designer-J15365 Western Canada

Test your design team to have a better understanding of individual strengths and areas for improvement.

Remote Multifamily Truss Designer J15356 Texas

Use your team's results to measure potential new hires!

For Additional Information email: twm@thejobline.com PHONE: 800-289-5627

Truss Designer J15357 East Texas Implementation and Support Specialist J15306 100% Remote - Northeast Truss & Wall Panel Designer J15226 Northeast

Remote Truss Designer J15307 Full Time Remote Read/Subscribe online at www.componentadvertiser.com

January 2026 #18318 Page #164

Truss Production Manager-J15354 Greater Toronto Area Remote Truss Designer - Alpine J15246 Midwest Candidate preferred Senior Truss & Wall Panel Designer - MiTek J15352 Midwest CFS Truss Designer | Wall Panel Designer J5323 Midwest Outside Sales - Truss/Lumber J15345 Southeast Truss Designer - On-site - MiTek J15346 Florida Truss Designer J15348 South Senior Truss Designer - J15342 Mountains Project Coordinator J15272 TN Remote Truss Designer - MiTek J15228 Florida Truss Designer J14165 Carolinas Senior Truss Designer-J15300 Eastern Ontario Senior Truss & EWP Designer - J15320 AB, BC, ON EWP Designer - J15314 BC

WE WORK WITH OVER 100 LOCATIONS IN THE UNITED STATES AND CANADA SOME ARE HIRING NOW AND SOME ASK US TO CALL WHEN QUALIFIED CANDIDTES ARE AVAILABLE WE RESEARCH OPPORTUNITIES FOR YOU!

Strictly Confidential! See Our Current Job Opportunities

Here FAX: 800-524-4982

JobLine.com, inc.

The

ID: C18448 Remote Senior Truss Designer Relocation: Florida Remote Truss Designer with more than 11 years of design work across tract homes, custom homes, multifamily projects, renovations, hotels, assisted living facilities, and tunnel-form construction. He is proficient in MiTek Sapphire Structure, MiTek 20/20, MiTek MBA, Alpine, AutoCAD, and Bluebeam, with strong skills in blueprint interpretation, layout development, optimization, code compliance, and resolving architectural discrepancies. His background includes training and mentoring designers, refining design training programs, and supporting both regional and national builder accounts. He has produced highquality truss placement plans, provided technical support to sales and customers, and consistently met productivity and accuracy standards in remote and fastpaced environments. He seeks a long-term remote design role with stability and growth potential. ID: C19039 Wall Panel Designer Relocation: Texas, REMOTE, Michigan This candidate brings a rare blend of handson construction experience and wall panel design expertise. Beginning his career as a carpenter, he spent years mastering framing, finish work, layouts, and overall building methodology before running his own construction business. When the market shifted, he transitioned into wall panel design, quickly excelling in software-driven production for residential, multi-family, and commercial projects, including large custom homes and multi-story hotels. His field background gives him practical insight into how panels are assembled, installed, and coordinated on-site, making his designs both accurate and builder-friendly. Known for reliability, adaptability, and a strong work ethic, he has also demonstrated the resilience to navigate major career transitions while remaining committed to craftsmanship and quality. After spending several years in transportation to support his family, he is returning to the construction industry with a renewed focus on balance, pride in his work, and long-term career growth. He is open to relocation for the right opportunity.

www.thejobline.com

Available Candidates for multifamily/commercial projects. Proficient use of MiTek Engineering, eFrame, AutoCAD, TJBeam, and Excel programs. He has some Sapphire experience but not as a Truss Designer. He expects to need 30 days to get back up to speed and re-learn Sapphire. 14+ years' experience as Plant Manager including staff development, workforce management and training, meeting production goals, asset management, maintenance and capital improvements, budget development and reporting, and assuring company policies were implemented across all departments. Compensation: Upper $40's per hour as a Remote Truss Designer to start with review and adjustment to actual value based on his abilities in 30-60 days. Thom's Notes: One of our top 1% Truss Design ACE's. Open to other remote opportunities that he is qualified to fill including Sales or Estimating. Will travel. ID: C18378 Remote Truss Designer Relocation: REMOTE, USA - Western Experienced Roof Truss Designer with a strong foundation in the building industry, seeking a role where my skills can contribute to company growth and long-term success. I thrive in fast-paced, high-pressure environments and excel at understanding customer needs, communicating clearly, and motivating teams through effective delegation. I recognize the importance of company-wide financial performance and strive to support overall success through efficient operations. My industry background is diverse, including truss design, hardware, lumber, equipment operation (small and heavy), construction, and home inspections. I began my career in the plant and advanced into design, gaining hands-on knowledge at every level.

I designed trusses using EdgeCad and Computrus to generate customer estimates and batch cutting reports for sawyers and builders. I prepared engineering packages for submission to Building and Safety Departments and use EdgeTrack for scheduling, delivery coordination, and billing. I’m now transitioning to ID: C11427 Remote Truss Designer/Design Manager - MiTek SAPPHIRE Structure for advanced design and project management and have Mega-Multifamily completed many training programs for Relocation: Texas MiTek SAPPHIRE and am ready for the 6 years experience as Plant Manager with next challenge. another 6 years in Design (one of our very few ACE designers): Facilitated the truss ID: C18549 sale, design, & delivery for lumber salesmen Remote Wall Panel Designer lacking truss experience. Developed own Relocation: USA - ALL States customer base by selling trusses. Design Wall panel designer with 10 years' layouts of floor and roof truss systems experience including production builders, PHONE: 800-289-5627

January 2026 #18318 Page #165

800-289-JOBS

JobLine.com, inc.

The

single family custom and small to MegaMultifamily projects. MiTek Sapphire software experience. ID: C18426 Remote Truss Designer Relocation: Colorado, Illinois, Indiana, North Carolina, South Carolina, Texas, Utah, Maryland, Florida, Georgia, Nebraska, REMOTE, Costa Rica, Pennsylvania, Te n n e s s e e , Vi r g i n i a , Wi s c o n s i n , Wyoming, Washington DC, Rhode Island, Saskatchewan, Oregon, Ontario, North Dakota, New York, New Mexico, New Jersey, New Hampshire, Nevada, Montana, Mississippi, Minnesota, Massachusetts, Kentucky, Delaware, Conneticut, California, Arizona, Alaska Offshore Truss Designer with MiTek experience. The candidate is a civil engineer with 6 years' truss design experience for companies in Texas and Florida. Prior work for BFS and smaller manufacturers. Bilingual Spanish/English with a company set up to make paying easy. Scored 89 on our truss design skills evaluation, which is near the senior designer level. He is also SBCA I & II certified. He is willing to go to work immediately. Compensation: $65-75k as a subcontractor, no benefits or taxes. We haven't represented offshore candidates in the past but feel this candidate is worth a shot. Please contact Thom for additional details. ID: C10122 Designer/Design Manager - Truss Relocation: Iowa Senior Designer. - Advanced. Candidate has 24 years Truss Ddesigner experience and 5 years Truss Design Manager experience. Products include floor trusses, roof trusses, I-Joists, and hardware. Markets include single family, custom, high end, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, repairs, customer service, inside sales, software maintenance, training, and filling in for the Design Manager as needed. Software experience includes MiTek and Keymark. Training received includes WTCA Level 2. Education: High School Graduate and Batchelors degree. Motivating factors: advancement, compensation, benefits, work location, job security, and relocation. ID: C18604 Truss Designer - Remote (MiTek) Relocation: Alberta I currently design & layout roof trusses, floor trusses, I-Joists and EWP from PDF plans and specifications for pricing. Also does engineering using MiTek, then uploads

Read/Subscribe online at www.componentadvertiser.com

800-289-JOBS

Need Help? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com STRICTLY CONFIDENTIAL!

Available Candidates to Management or MBA in the past. Once sold, and field measurements are provided, I update the project and clean up the layouts, trusses and release them to the shop. I also answer questions from sales and the shop as needed as well as training newer designers. Most of my projects are single family, but I have also done several apartments, hotels, assisted living centers, and other commercial projects. I want to grow, learn, and become a better designer to be a valued team member. ID: C10853 Remote Design Manager | Remote Offshore Design Project Manager Relocation: Texas, Georgia, USA - South Top level Engineering/Design Management candidate, 14+- years experience Truss, 4+- Panel experience. Has experience building and integrating offshore design resources with internal design departments and training design managers to better utilize offshore capabilities. Large volume manufacturer experience. MiTek Sapphire design/layout proficient. Too confidential to go into more detail. Compensation: $120k+ ID: C11370 General | Plant Manager/Operations - Truss/ Panel/Framing Package Relocation: Texas, Arizona 20 years' experience. Started in production, advanced to Saw Supervisor, Production Manager, Plant Manager, now General Manager. As General Manager operated a $125M truss plant. Tripled output and reduced errors and labor cost. Developed and implemented standards and procedures to manage quality and costs. As Plant Manager (4 years), manage all the operation of the manufacturing plant, such as Productivity, logistics, efficiencies, costs. As Production Manager (12 years), manage all the areas of the manufacturing across the plant. Safety, quality control, efficiencies, HR, etc... Software: MiTek, Word, Excel, OptiFrame. Products: R & F Truss, Panel, FAX: 800-524-4982

JobLine.com, inc.

The

Framing package. Markets: Single Family, Multifamily, Custom Homes. Bilingual English/Spanish spoken and written. Degree in Industrial Engineering. Compensation: $90's+ bonus ($100k min) ID: C10897 Design Manager/Senior Designer/PE/ Optimizer - Truss/Panel/EWP Relocation: REMOTE 30 year industry veteran, started as a Truss Designer, earned his way to Design Manager over 20+ designers. MiTek - Advanced, AutoCAD proficient. BSCE - PE. Compensation: Open?? Thom's Notes: PE with Mid Atlantic seals ID: C18565 Designer: Truss/Panel, Wood/Steel, BIM Relocation: North Carolina Material take-offs, proposals, job-site meetings, Submittal Tracking, Excellent Problem-solving Skills, Material Ordering, Field Measuring, 3-D Modeling Program (3-D and 4-D BIM in-house), Generated material take-offs from the BIM model, Coordinated RFI's thru the BIM model, Clash detection between wood trusses, structural steel and LVL's. 3-D Scan's of job-sites. Scheduled / Distributed work to 6 designers Cross-trained all designers in roof floor and wall panels for whole-house design. ID: C10507 Senior Management - Truss/Panel/Lumber/ Installed Services Relocation: USA - Western I am a Diverse driven individual seeking a position in the fast paced construction component industry where my professionalism in sales, business and leadership skills along with a strong proven background in, General Management, Operations, Sales Management, strategic alliances, business development, team building, P&L experience and Customer Satisfaction will play an integral part in growing new business, nurturing existing business or developing company operations to meet the highest level of efficiencies, standards and safety while having fun doing it!

800-289-JOBS www.thejobline.com

Available Candidates the customer as it related to changes in the ID: C12414 Truss Designer | Wall Panel Designer | delivery schedule. Batched jobs through the engineering All Hats Relocation: Arizona software to the component saws and truss building tables Engineered panel and truss design, Quality Assurance – WTCA/TPI developed material take off for turnkey build up, worked in coordination with ID: C18365 multiple plants and design teams, worked Intermediate Canadian Remote Truss closely with material suppliers on take offs Designer - Sapphire Relocation: Ontario and estimating. I've worked for decades in the construction industry. Not only in new construction, but additions and remodels as well using innovative designs for added value and to drive down cost. In addition to experience with MiTek, Wallbuilder and other design software packages, I have extensive manual trig/math skills. I use these to back check questionable loads as well to design from scratch in the field when needed. I have also written tutorials for the training of others and checked other designer's work as a Design Manager at a Panel Plant. All things being equal, I love working in components whether designing, cutting, building or setting components at the site. ID: C18430 Truss Designer | Remote Truss Designer Relocation: USA - South, USA - Southwest, USA - ALL States Extensive experience in truss estimating and design. Proficient in designing roof and floor trusses for a variety of projects including: custom homes, track homes, multi-family, mega-multifamily, and light commercial projects. I always get everyone involved with the project like architect, engineers, homeowners, and sales personnel Many times I go to the job site for the convenience of the framer and see what kind of condition or changes they might have; this way we will be working on the same page. Also included in my experience is purchasing material, negotiating contracts, setting up deliveries, steel and cmu detailing for steel columns and beams, with almost 25 years of experience in the construction business. MiTek Sapphire. ID: C18412 Plant | Production | Operations Manager Truss/Panel Relocation: Georgia, South Carolina, Florida

ID: C18387 Division Manager, VP Operations, President - Truss | Panel | Building Materials | Pro Dealer Relocation: Arizona, Colorado, Florida, Georgia, Hawaii, Maryland, Texas, USA South, Virginia, Washington DC, Wisconsin

Oversaw all aspects of the manufacturing and shipping of wood truss component systems for the building industry: roofs, floors and wall panels; 2 shift operation; 8 million in sales.

Executive level manager, VP, President with $1+B P&L responsibility. Lumber, building materials, trusses, wall panels, and CFS background. Inquire to discuss this candidate.

Managed the master schedule based on sales orders, plant volume, and lead time through the Mitek Management Business Application System. Followed all orders through the process to insure OTD (on time delivery). Handled all phone communications from

PHONE: 800-289-5627

Remote Truss Designer available.. Currently provides technical support and designs to lumber distributors for roof systems for residential and commercial applications. Provides technical assistance and support to the distribution staff to meet client demands for engineered wood structural applications. Ensures that wood truss fabricators, lumber distributors and specifiers have adhered to established building standards, codes and practices. Maintains extensive knowledge of structural analysis programs such as MiTek SAPPHIRE Structure design software. Analyze/prepare engineered wood designs and details for Design Engineer review and approval. Generate manufacturing information and quotations for sales team and management. Prepares the job for production. Canadian codes and standards experienced. ID: C15958 Operations/Plant Manager - Millwork | Doors | Ply | Flooring Relocation: Colorado, Illinois, Indiana, Iowa, Kansas, Kentucky, Minnesota, Missouri, Montana, Nebraska, Nevada, North Carolina, South Dakota, Tennessee, Virginia, Wyoming 30 years' experience starting in production and advancing to multi-plant operations manager. Door experience includes managing three Production Managers and five Production Supervisors, consisting of 300 hourly employees producing 11,000 doors and 10,000 face frames per day. Responsible for the manufacturing functions of all mill operations, five frame component machining cells, three frame assembly operations, four door component machining cells, three door assembly clamps, three door profiling lines, two wide belt sanding lines and specialty machining and assembly cells. Flooring experience: Responsible for all plant functions including budgeting and P&L. Managed six Department Managers: two Production Departments, Quality Assurance, Materials, Human Resources including SHE, and Plant Engineer/Maintenance Manager including the CI program. Their staffs consist of eleven Supervisors and 330 hourly employees. The door plant operation dries lumber, cuts dimension stock, assembles and sands the doors. The panel plant produces the veneered flat and raised center panels, by cutting engineered wood and veneer

Read/Subscribe online at www.componentadvertiser.com

January 2026 #18318 Page #166 from flitch and pressing the veneer to the substrate. Both plants are equipped with finishing lines. ID: C15995 Truss Designer - MiTek Relocation: Florida Truss Designer. Primary duties: design, layout, optimization, and cutting/production documents. Secondary duties: checking others work. Software used: MiTek and AutoCAD. Component experience includes floor trusses and roof trusses. Market experience includes single family, multifamily, light commercial, and agriculture. My volume was varied depending on projects. 2 years experience, MiTek software. ID: C18277 Professional Engineer | Engineering Manager - Engineered Wood Products, Components Structural Hardware | Codes & Compliance Relocation: Maryland, Minnesota, North Carolina, Pennsylvania, South Carolina, USA - Eastern, Virginia, Washington DC Experienced and successful professional engineering manager with over 25 years experience in improving productivity and resolving structural problems for engineered wood product and truss manufacturers and developing innovative design software programs. Also skilled in building outstanding teams and relationships among sales, manufacturing, and engineering stakeholders. Highly educated with exceptional employment history & experience. ID: C18250 Remote Senior Light Gage Steel Truss/ Panel Designer. Relocation: Texas Top level Light Gage Steel Senior Remote Designer with Truss and Panel and well as metal frame commercial project experience. Alpine, Truswal and Keymark experience. ID: C17230 Remote Wall Panel Designer - Sapphire Relocation: Newfoundland My objective is to be part of a team/company and prove I am reliable, show my ability and my willingness to learn! In addition to being a newer wall panel designer, I have learned software such as Mitek Sapphire, Revit 2017, Bluebeam Revu 2016. I have recently done jobs such as designing garages and adding on additions to homes. Jobs I have worked in wall paneling include a massive wall panel job for the US (500,000+ SFT) and designed units for a senior complex. In addition to wall panels...I also add in blocking, windows, doors, etc. I also do bundling and paperwork as well.

FAX: 800-524-4982

JobLine.com, inc.

The

ID: C16152 Mega-Multifamily General Manager Relocation: Florida Mega-Multifamily General Manager. Apply to discuss this candidate. Highly confidential. ID: C11781 Truss Design Manager Relocation: New York Worked on the most complicated custom projects, commercial buildings, and apartment complexes. Quickly became a team leader and was considered company wide as an expert in truss framing and computer applications. Provided training for a group of 30 experienced component designers in topics including load tracking, truss and layout optimization, and hardware specification. Optimization training helped to reduced material costs by 5%. Developed departmental procedures to increase consistency and accuracy of all designs and estimates. Reduced errors on repetitive projects by 25% by creating the master project file database, which organized and provided fast and easy access to project information. Streamlined estimating process for commercial construction projects. Analyzed the final cost of completed projects and applied results to new estimates. Reduced estimating time by 75% Managed up to 10 designers/sales reps. Software: MiTek, AutoCAD. ID: C15857 Senior Truss Designer | Remote Truss Designer | Design Manager Relocation: California Truss Designer. Primary duties: design, layout, optimization, cutting/production documents, and takeoff. Secondary duties: checking others work, scheduling, repairs, customer service, inside sales, and field measurements. Software used: MiTek and AutoCAD. Component experience includes floor trusses, roof trusses, I-Joists, EWP, and hardware. Market experience includes tract, single family, single family custom, multifamily, and light commercial. My volume was varied depending on projects. Has used MiTek, Alpine, AutoCAD, and Microsoft Office programs. The candidate has been out of the industry, working in parallel jobs, and wants to return to a design position. Scored Senior Designer using an HP calculator, 8 years after his last truss design job. Speed was faster than average too. It may take a little time for him to get up to speed on the latest software. Ranked 5 out of 5 in our system. ID: C10810 Designer/Inside Sales - Truss Relocation: Virginia 6 years design experience, 1 inside sales. Primary duties: design, layout, optimization, PHONE: 800-289-5627

January 2026 #18318 Page #167

800-289-JOBS www.thejobline.com

Available Candidates cutting/production documents, and takeoff. cutting/production documents. Secondary Secondary duties: scheduling, repairs, duties: checking others work and field customer service, inside sales, and field measurements. Software used: Alpine and measurements. Software used: MiTek, MiTek. Component experience includes AutoCAD, and CAD - Other. Component floor trusses, roof trusses, I-Joists, EWP, experience includes floor trusses and roof and hardware. Market experience includes trusses. Market experience includes tract, single family, single family custom, multisingle family, single family custom, multifamily, and light commercial. BS Civil family, light commercial, and agriculture. Engineering. Software: Alpine, MiTek, My volume was varied depending on AutoCAD, Word, Excel. projects. Past carpenter and framer. Has ID: C10324 an engineering related associates degree/ Plant Manager/Designer/Design Manager/?? drafting - Truss/Panel/Installed Relocation: Georgia Compensation: $45k+ As Location Manager, managed one ID: C15679 estimator, four designers, a secretary/ LGS Truss & Panel PE data entry person, and a shop of 40 truss Relocation: USA - Eastern, USA - South production employees. As Senior Designer, primary duties: design, layout, optimization, As Engineering Manager I was responsible and takeoff. Secondary duties: checking for oversight of all technical and engineering others work, scheduling, repairs, customer engagements. Design of light gauge metal service, and training. Software used: Alpine trusses, wall panels, shear walls, for hotels, and AutoCAD. Component experience retirement homes and other commercial includes floor trusses, roof trusses, wall and residential structures. Making jobs panels, framed openings, I-Joists, EWP, viable by replacing red-iron with light hardware, lumber, and complete framing gauge metal was key to solidifying more package. Market experience includes tract, projects. I was actively engaged in computer single family, single family custom, multisoftware development of truss design and family, and light commercial. coordinating overseas programming efforts into truss layout. Thom's Notes: Very experienced, willing to wear many hats. As Senior Technical Services Engineer, I held the nation-wide responsibility for all light gauge cold-formed steel truss engineering including field applied repair design. I provided technical advice and counsel to our staff and functioned as a subject matter expert (SME) for all three product divisions. As a result, I augmented my professional registrations to include 38 States, 1 District, and 1 Canadian Province. ID: C14490 General Manager | Operations Manager | Turn Around Relocation: Colorado, Delaware, Illinois, Indiana, Iowa, Kentucky, Maryland, Michigan, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Tennessee, Virginia, Washington DC, West Virginia, Arkansas, Massachusetts, Minnesota, Missouri, Montana, North Dakota, Rhode Island, South Carolina, South Dakota, Texas, Wisconsin, Florida, Georgia, Idaho, Kansas Full P&L turnaround of a family owned light gage steel panel manufacturing company. Turned it form a mom and pop, into a large, functioning manufacturing company that had systems, KPI programs, personnel development, and a growing customer base. Ready to help take your company to the next level. ID: C11895 Designer - Truss/I-Joists, EWP Relocation: California, USA - ALL States, Texas, Alaska

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? We’re here when you need help! visit: www.thejobline.com email: twm@thejobline.com STRICTLY CONFIDENTIAL!

Designer. Primary duties: design and Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #168

Fed Eases Monetary Policy Posted December 11, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission. The central bank’s Federal Open Market Committee (FOMC) cut rates a third and final time in 2025, reducing the target range for the federal funds rate by 25 basis points to a 3.5% to 3.75% range. This reduction will help reduce financing costs of builder and developer loans. The tone of yesterday’s meeting was more dovish than investors expected. Overall, the Fed faces a complicated outlook with risks on both sides of its dual mandate: supporting the labor market and maintaining stable prices. Interest rate-sensitive sectors such as housing continue to face restrictive conditions. The slightly dovish stance of yesterday’s announcement suggests the FOMC perceives greater near-term downside risk for the labor market component of its mandate, despite an improving outlook for GDP growth. The Fed’s statement noted that job gains have slowed and the unemployment rate has edged higher through September. In contrast to recent policy statements, the Fed did not note unemployment as “low.” The slowing of the labor market is due to both a decline in immigration and a pullback in hiring by firms. The December view of the economy was somewhat obscured by missing or delayed government data because of the nowended government shutdown. Fed Chair Jerome Powell stated in his press conference that activity in the housing sector remains “weak.” Powell also noted that supply remains low, and home owners remain locked-in because of low-rate mortgages. Finally, the Fed chair indicated that the United States has not built enough housing, leading to affordability challenges due to a structural housing shortage. Chair Powell also noted that inflation has been lowered, but remains “elevated,” because of recent monetary policy actions. Inflation expectations have declined, and long-term expectations remain anchored to the central bank’s 2% target. This framing of the economic situation is consistent with the December rate cut as being an insurance policy of easing given weakening of the labor market because of policy uncertainty and tariffs. That is, the Fed’s cut biases policy to responding to future weakening of economic growth rather than to concerns about inflation reaccelerating. (Some FOMC members have argued, for example, that markets can look through any tariff effects, which will be one-off impacts.) There was a notable level of dissent at the December meeting. Two voting members of the FOMC (Goolsbee and Schmid) preferred no change to the target rate. In contrast, Governor Miran supported a 50-basis-point reduction. This marks the largest level of dissent since September 2019. Separate from policy considerations, as Chair Powell explicitly noted, the Fed will initiate purchases of shortterm Treasury securities on Dec. 12 to maintain an appropriate level of reserves as a means of monetary policy implementation and to enable smooth market functioning. NAHB Chief Economist Dr. Robert Dietz provides additional insights on the Fed’s outlook for the economy and the monetary policy in this Eye on Housing post. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #169

Construction Labor Market Stable Posted December 9, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission. The count of open, unfilled positions in the construction industry was relatively unchanged in October, per the Bureau of Labor Statistics Job Openings and Labor Turnover Survey (JOLTS). The current level of open jobs is down measurably from two years ago due to declines in construction activity, particularly in housing. The number of open jobs for the overall economy was effectively unchanged, increasing from 7.66 million in September to 7.67 million in October. The October reading was was relatively unchanged from the 7.62 million estimate from a year ago. The number of open construction sector jobs decreased from 231,000 in September to 213,000 in October. This total is relatively stable compared to a year ago (249,000), although the reading is notably lower than two years ago. The construction job openings rate declined to 2.5% in October, lower than the 2.9% rate estimated a year ago. The layoff rate in construction declined to 1.8% in October. The quits rate edged lower to 1.4% in October.

NAHB Chief Economist Dr. Robert Dietz explains how this data may affect the Federal Reserve’s decision to reduce interest rates in this Eye on Housing post.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #170

Preventing Cold, Flu and COVID Illnesses on Jobsites Starts with a Plan Posted December 12, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission. In the construction industry, working outdoors may appear to create less risk for catching a cold, flu, and COVID-19, but it’s crucial to understand that these illnesses can still spread while working in close proximity in any conditions. The Centers for Disease Control and Prevention (CDC) estimates as many as 47 million to 82 million flu illnesses and 27,000 to 130,000 deaths caused by the flu in the U.S. occurred between Oct. 1, 2024, and May 17, 2025. As peak flu season approaches, NAHB is raising awareness to help your organization prevent any illnesses from starting and spreading in your workplace.

How Are Construction Workers Affected? •

Sharing tools, equipment and restroom facilities.

•

Carpooling to work together.

•

Taking over-the-counter medications, which can lead to impaired judgment while on the job.

•

Working outside in cold weather can lead to a weakened immune system, creating more vulnerability for catching a respiratory illness.

•

Working under stressful conditions resulting in loss of sleep, appetite, and increased risk of workers using alcohol and substances.

What Can You Do to Prevent Jobsite Illnesses? •

Train employees on preventing the spread of cold, flu and other illnesses.

•

Provide an adequate amount of toilet and handwash facilities and keep them in proper sanitary condition. OSHA requires at least one restroom for every 20 workers, but the best industry practice is one restroom per eight workers working a standard 40-hour work week.

•

Encourage workers to wash hands frequently with soap and water.

NAHB and its partners have several resources available to train workers on proper jobsite sanitation practices and best practices to recognize and prevent the spread of cold and flu symptoms, including: •

NAHB-JSI Video Toolbox Talks on Jobsite Sanitation, COVID-19 Jobsite Safety, and Cold Stress Safety

•

OSHA Guidance: Precautions During Flu Season

•

OSHA Seasonal Flu Factsheet

•

CDC: Preventing Seasonal Flu

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #171

Builder Sentiment Inches Higher but Ends the Year in Negative Territory Posted December 15, 2025 on NAHB Now | The News Blog of the National Association of Home Builders Reprinted with permission. Builder confidence inched higher to end the year but still remains well into negative territory as builders continue to grapple with rising construction costs, tariff and economic uncertainty, and many potential buyers remaining on the sidelines due to affordability concerns. Builder confidence in the market for newly built single-family homes rose one point to 39 in December, according to the National Association of Home Builders (NAHB)/Wells Fargo Housing Market Index (HMI) released today. Sentiment levels were below the breakeven point of 50 every month in 2025 and ranged in the high 30s in the final quarter of the year. “Market conditions remain challenging with two-thirds of builders reporting they are offering incentives to move buyers off the fence,” said NAHB Chairman Buddy Hughes, a home builder and developer from Lexington, N.C. “Meanwhile, builders are contending with rising material and labor prices, as tariffs are having serious repercussions on construction costs.” “In positive signs for the market, builders report that future sales expectations have been above the key breakeven level of 50 for the past three months and the recent easing of monetary policy should help builder loan conditions at the start of 2026,” said NAHB Chief Economist Robert Dietz. “However, builders continue to face supply-side headwinds, as regulatory costs and material prices remain stubbornly high. Rising inventory also has increased competition for newly built homes.” In a further sign of ongoing challenges for the housing market, the latest HMI survey also revealed that 40% of builders reported cutting prices in December, marking the second consecutive month the share has been at 40% or higher since May 2020. It was 41% in November. Meanwhile, the average price reduction was 5% in December, down from the 6% rate in November. The use of sales incentives was 67% in December, the highest percentage in the post-Covid period. Derived from a monthly survey that NAHB has been conducting for more than 40 years, the NAHB/Wells Fargo HMI gauges builder perceptions of current single-family home sales and sales expectations for the next six months as “good,” “fair” or “poor.” The survey also asks builders to rate traffic of prospective buyers as “high to very high,” “average” or “low to very low.” Scores for each component are then used to calculate a seasonally adjusted index where any number over 50 indicates that more builders view conditions as good than poor. The HMI index gauging current sales conditions increased one point to 42, the index measuring future sales rose one point to 52 and the gauge charting traffic of prospective buyers held steady at 26. Looking at the three-month moving averages for regional HMI scores, the Northeast fell one point to 47, the Midwest rose two points to 43, the South increased two points to 36 and the West gained four points to 34. HMI tables can be found at nahb.org/hmi. More information on housing statistics is also available at Housing Economics PLUS.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #172

Simpson Strong-Tie Introduces PFUD™ Post Frame Undersaddle Hangers for Easier, Faster Layout December 11, 2025 – Pleasanton, Calif. — Simpson Strong-Tie, the leader in engineered structural connectors and building solutions, is simplifying post frame construction with the launch of two PFUD™ undersaddle hangers. The hangers feature a two-sided design so that one hanger supports ceiling joists on each side of a truss instead of requiring a separate facemounted hanger for each joist. The continuous seat fits snugly under the truss’s bottom chord, automatically aligning parts vertically for an easier, faster layout. For single-side applications, installers simply bend and separate the hanger along the perforations to create two face-mounted options. “PFUD undersaddle hangers are extremely versatile, streamlining installation to reduce connector layout labor costs by half versus using two face-mounted hangers,” said Randy Daudet, group product manager for Simpson Strong-Tie. “At the same time, the hangers offer greater reliability and load capacity than toenailed ceiling joists.” The hangers are fully tested and code listed. They’re load rated for joist tension forces, so they’re ideal with ceiling panels acting as diaphragms or for bottom-chord truss bracing. Two options are available: The PFUD24 fits one-ply trusses, and the PFUDS24 fits two-ply trusses. For more information, visit www.strongtie.com.

About Simpson Strong-Tie Company Inc. Simpson Strong-Tie is the world leader in structural solutions — products and technology that help people design and build safer, stronger homes, buildings, and communities. As a pioneer in the building industry, we have an unmatched passion for problem solving through skillful engineering and thoughtful innovation. Our structural systems research and rigorous testing enable us to design code-listed, value-engineered solutions for a multitude of applications in wood, steel, and concrete structures. Our dedication to pursuing ever-better construction products and technology and to surrounding our customers with exceptional service and support has been core to our mission since 1956. For more information, visit strongtie.com and follow us on Facebook, Twitter, YouTube and LinkedIn.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #173

Simpson Strong-Tie Employees Donate Time, Products for 2025 Habitat for Humanity Carter Work Project November 26, 2025 – As part of its ongoing support for Habitat for Humanity, Simpson Strong-Tie, the leader in engineered structural connectors and building solutions, sponsored and provided volunteers for the annual Jimmy & Rosalynn Carter Work Project 2025. This year’s event was held October 26–31 in Austin, Texas. Over 40 years and across 14 countries, the Jimmy & Rosalynn Carter Work Project has brought together volunteers and VIPs to build, renovate or repair nearly 4,500 homes while shining a global spotlight on the importance of affordable housing. Volunteers on this year’s project worked on new homes in Whisper Valley, Austin Habitat for Humanity’s first geothermal community, featuring 48 affordable, energy-efficient single-family houses. Through a combination of monetary and product donations, Simpson Strong-Tie was a Roof Raiser sponsor for this year’s event. In addition, six Simpson Strong-Tie employees from the company’s McKinney, Texas, branch volunteered onsite during the week. “Finding affordable housing is a critical issue for a significant percentage of Americans, and the work Habitat for Humanity does to bring homeownership within reach of more people is essential,” said Jennifer Lutz, executive vice president, human resources for Simpson Strong-Tie. “Working with the Jimmy & Rosalynn Carter Work Project is part of our ongoing commitment to support both our industry and our communities. We’re particularly proud of our employees for their dedication, as well, in donating their time and expertise to this important cause.” “Working with Habitat for Humanity was an experience that will stay with me forever. Coming together with volunteers from all over — each bringing their own story, energy and heart — was truly inspiring,” said Corynn De La Garza, dealer sales representative for Simpson Strong-Tie. “I’m so grateful to work for a company that gives back and stands firmly behind its principles of compassion, community and service. I can’t wait to be part of it again next year!” Senior Territory Sales Manager Matt Lea voiced similar sentiments: “It was an incredible experience that left a lasting impression on me. Throughout the week, I had the chance to learn new skills and step outside my comfort zone — all in the service of a greater cause,” he said. “What stood out most was how a group of strangers, from different backgrounds and geographies, came together with a shared purpose: to help a family move into an affordable home simply because it’s the right thing to do. That unity and selflessness were inspiring.” To learn more about the Jimmy & Rosalynn Carter Work Project, visit www.habitat.org/carter-work-project. To learn more about Simpson Strong-Tie’s giving and partnership efforts, visit news.strongtie.com/releases/giving-and-partnerships.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #174

West Fraser Reduces OSB Capacity VANCOUVER, BC, Dec. 4, 2025 /CNW/ -- West Fraser Timber Co. Ltd. announced today that it will indefinitely curtail its oriented strand board (OSB) mill in High Level, Alberta in the spring of 2026 following an orderly wind-down and consumption of the mill’s existing log supply. Today’s decision is the result of a significant weakening of OSB demand and is expected to reduce West Fraser’s capacity by 860 million square feet (3/8-inch). West Fraser expects to mitigate the impact on the approximate 190 affected employees at the site by providing work opportunities at other company operations, where available. West Fraser also confirmed that the idling of one of its production lines at its Cordele, Georgia OSB facility since late 2023 will continue indefinitely. The idled production line at Cordele has a capacity of 440 million square feet (3/8-inch). The most significant uses for West Fraser’s North American OSB products are residential construction (sheathing, sub-flooring, roof decking, etc.), repair and remodelling and industrial applications. The High Level mill has been in the West Fraser family since the OSB line of business was acquired in 2021. West Fraser expects to record an approximately $200 million asset impairment loss in the fourth quarter of 2025 in connection with the indefinite curtailment of the High Level OSB mill. About West Fraser West Fraser is a diversified wood products company with more than 50 facilities in Canada, the United States, the United Kingdom, and Europe, which promotes sustainable forest practices in its operations. The Company produces lumber, engineered wood products (OSB, LVL, MDF, plywood, and particleboard), pulp, newsprint, wood chips, and other residuals. West Fraser’s products are used in home construction, repair and remodelling, industrial applications, papers and tissue. For more information about West Fraser, visit www.westfraser.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #175

SBCA Creates Political Action Committee: SBC PAC The Structural Building Components Association (SBCA) is pleased to announce that its Board of Directors has approved the creation of a new political action committee: the Structural Building Components Political Action Committee (SBC PAC). This new PAC is designed to help create a unified, proactive voice for the structural building components industry in Washington, D.C., and throughout the country. SBC PAC will serve as an advocacy tool to help member companies, including manufacturers of roof trusses, floor trusses, wall panels, and other offsite structural framing elements, influence public policy that affects housing, construction, and manufacturing. Its mission is to support policies that protect and advance the interests of component manufacturers, while raising awareness among lawmakers about the essential role the industry plays in supporting national economic and housing goals. One focus of the SBC PAC will be engaging directly with federal lawmakers. As part of this effort, SBCA’s established activities, such as the SBCA Advocacy Committee’s annual Legislative Fly-In to Capitol Hill, will now be augmented through the outreach and support of the PAC. Additionally, SBC PAC will seek to continue to amplify SBCA’s participation in high-profile events like the U.S. Department of Housing and Urban Development’s (HUD) annual Innovative Housing Showcase, where the association has demonstrated how structural building components can offer efficient, already-scalable solutions to the nation’s housing needs. By bolstering its advocacy efforts through SBC PAC, SBCA aims to build stronger relationships with key figures in Congress. The PAC will help ensure that component manufacturers have a seat at the table when legislation or regulations impacting things like housing, construction standards, supply chains, and offsite manufacturing are under consideration. For SBCA members, the launch of SBC PAC represents a significant step forward in its advocacy efforts, providing a formal, organized way to begin to influence public policy at the federal level and amplify the voice of the structural building components industry. As SBCA continues its mission of representing and strengthening manufacturers of components, SBC PAC will be a powerful tool. The SBC PAC is now open for support and engagement from industry members committed to shaping a favorable legislative and regulatory environment for component manufacturing. Learn more at sbcpac.com.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #176

Lezzer Lumber Expands Western Pennsylvania Footprint with Acquisition of H.P. Starr and Brookside Lumber December 10, 2025 -- Lezzer Lumber is pleased to announce the acquisition of H.P. Starr and Brookside Lumber, a family-owned building materials company serving the greater Pittsburgh region for nearly a century. The addition of these three locations—Bethel Park, Zelienople, and Valencia—significantly strengthens Lezzer Lumber’s presence in Western Pennsylvania and enhances service capabilities for professional contractors, remodelers, and DIY customers across the region. This acquisition follows Lezzer Lumber’s 2024 purchase of Trinity Supply & Installation in Pittsburgh, continuing the company’s strategic growth in the Western PA market and bringing its total number of lumberyards to 15 statewide. With these new locations, Lezzer Lumber is expanding material availability and strengthening service support for the area’s building community. The Edwards family chose to join Lezzer Lumber to ensure a strong future for their employees and customers. Their decision reflects shared values, a commitment to community, and confidence in Lezzer Lumber’s experience successfully integrating teams through previous acquisitions. By joining Lezzer Lumber, the H.P. Starr and Brookside teams will gain access to the company’s extensive capabilities, including 12 additional lumberyard locations across Pennsylvania, a full truss manufacturing plant in Curwensville, four commercial door facilities, two millwork shops, and 13 kitchen and bath design centers. This expanded network will enable these locations to offer more comprehensive product solutions and project support. Lezzer Lumber’s leadership team—including Mike, Dave, and K.C. Lezzer—has worked closely with Bruce, Gordon, and the Edwards families throughout the transition, emphasizing employee continuity, customer relationships, and a smooth operational handoff. Both companies share core values of family, integrity, pride, and passion—principles that will continue to guide operations moving forward. Lezzer Lumber looks forward to welcoming the H.P. Starr and Brookside employees and customers into its family and continuing its growth in the Western Pennsylvania market.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #177

Franklin Building Supply Acquires Snake River Truss and Components to Expand Presence in Eastern Idaho IDAHO FALLS, Idaho, December 5, 2025 – Franklin Building Supply, a nearly 50-year-old, 100% employeeowned building materials company, today announced the acquisition of Snake River Truss and Components, a well-established truss manufacturing facility in Idaho Falls. The acquisition represents a significant milestone in FBS’s strategic expansion into Eastern Idaho and positions the company to better serve the region’s growing construction market. SRT has been a trusted name in Eastern Idaho’s construction industry for more than twenty years, known for quality truss manufacturing and strong customer relationships. The facility will continue operations under FBS ownership, with all current employees joining the FBS team as employee-owners. “This acquisition is about building on a strong foundation,” said Levi Smith, CEO of Franklin Building Supply. “Snake River Truss and Components has built an excellent reputation in Idaho Falls over the past thirteen years, and we’re committed to preserving what makes them successful while providing additional resources and opportunities for growth. We chose to acquire SRT rather than build from scratch because of the quality of their team, their customer relationships, and their operational excellence. This is a strategic investment in our future in Eastern Idaho.” The acquisition complements FBS’s recent opening of a lumber and building materials location in Idaho Falls in November 2025. With the addition of SRT’s manufacturing capabilities, FBS can now offer full-service building materials solutions to customers throughout the region. “SRT has been built on a foundation of quality craftsmanship and strong relationships with our customers,” said Dan West, owner of Snake River Truss and Components. “Franklin Building Supply shares our commitment to excellence and taking care of people. I’m confident that this partnership will create new opportunities for our team and allow us to serve our customers even better. FBS’s resources and employee-ownership model will provide stability and growth potential that will benefit everyone involved.” The acquisition aligns with FBS’s broader regional expansion strategy. The company plans to open a new, larger location in Idaho Falls in Q2 2027, which will integrate the company’s lumber, building materials, and truss operations to provide enhanced services to the region. FBS will also be making strategic investments in the SRT facility over the coming year to improve and expand manufacturing capabilities.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #178

Toll Brothers Reports FY 2025 Fourth Quarter Results FORT WASHINGTON, Pa., Dec. 08, 2025 -- Toll Brothers, Inc., the nation’s leading builder of luxury homes, today announced results for its fourth quarter ended October 31, 2025. FY 2025’s Fourth Quarter Financial Highlights: •

Home sales revenues were $3.41 billion compared to $3.26 billion in FY 2024’s fourth quarter; delivered homes were 3,443 compared to 3,431 in FY 2024’s fourth quarter.

•

Home sales gross margin was 25.5%, compared to FY 2024’s fourth quarter home sales gross margin of 26.0%.

•

On September 18, 2025, the Company announced an agreement to sell its interests in approximately half of its Apartment Living portfolio, along with its operating platform, to Kennedy Wilson. The purchase price for the acquired assets is now $380 million, reflecting ongoing investments since the September announcement. As part of the transaction, which is now expected to be completed in the first quarter of FY 2026, Kennedy Wilson has agreed to assume the Company’s management responsibilities for its retained interests. The Company intends to sell these remaining interests and exit the multifamily development business.

Douglas C. Yearley, Jr., chairman and chief executive officer, stated: “Fiscal 2025 proved to be another strong year for Toll Brothers, as we executed well in a choppy environment. We delivered 11,292 homes at an average price of $960,000, generating a record $10.8 billion of home sales revenues, and posted an adjusted gross margin of 27.3%, an SG&A margin of 9.5%, and earnings of $13.49 per diluted share. We grew our community count by 9%, continued to produce strong operating cash flows of $1.1 billion, returned approximately $750 million to stockholders through share repurchases and dividends, and generated a return on beginning equity of 17.6%.” “Given soft demand across many markets, we remain focused on running our business in a disciplined manner and consistent with our long-term strategic objective of maximizing returns for stockholders. We continue to balance price and pace and are actively managing our spec starts and inventory on a community-by-community basis to best match local demand conditions. We control sufficient land to support continued community count growth over the next several years, including 8% to 10% growth in fiscal 2026, and we remain highly disciplined and selective in new land acquisition as we continue to focus on capital efficiency. “Our fourth quarter and full year results demonstrate that our luxury business is differentiated, as we serve a more affluent customer who is less impacted by affordability pressures. These results also underscore the resilience of our business model, which includes a healthy balance of build-to-order and spec homes, a broad geographic footprint, the widest variety of home offerings and price points in the industry, and improved operating efficiency. Combined with our tremendous luxury brand, solid balance sheet, healthy liquidity and premier land holdings, we are well positioned to deliver strong financial results, achieve long-term growth and continue returning capital to stockholders.” Read the complete press release online

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #179

U.S. Chamber of Commerce Report Highlights Building Codes as Solution to Stabilizing Insurance Markets The report shows that strong building codes lead to resilient communities and affordable insurance. November 21, 2025 – As natural disasters grow in frequency and severity, the financial toll on homeowners and insurers continues to rise. Communities across the United States are grappling with escalating insurance premiums, reduced coverage options and the challenge of rebuilding after catastrophic events. In an attempt to ease these burdens, the U.S. Chamber of Commerce is urging policymakers, industry leaders and local governments to embrace smarter, forward-looking resilience strategies. One of the most effective solutions is modern, consensus-based building codes. These codes are not simply technical guidelines, but rather foundational policies that foster the safety, affordability and resilience of communities across the U.S. and beyond. Building Codes as a Policy Solution According to the U.S. Chamber of Commerce’s recent whitepaper, The Path to Affordability and Availability in Homeowners Insurance, adherence to the most recent International Codes® (I-Codes®) could be a key policy solution to stabilize insurance markets. The report estimates that “if all new buildings were constructed to meet these standards, the U.S. could prevent more than $600 billion in losses by 2060.” The evidence is already visible in places like Florida, where decisive action to strengthen building codes and require higher standards of resilience has reduced the scale of damage from hurricanes and other severe weather events, ultimately lowering costs for homeowners and insurers alike. More information on the Chamber of Commerce report can be found here. Learn more about the I-Codes and the code development process, here.

About the International Code Council The International Code Council is a nonprofit association that provides a wide range of building safety solutions, including product evaluation, accreditation, certification, codification and training. It develops model codes and standards used worldwide to construct safe, sustainable, affordable and resilient structures.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #180

Buildcheck Raises $5.9M to Launch AI-Powered Construction Design Review Platform San Francisco, CA, December 9, 2025 – Buildcheck AI, Inc., an AI-powered construction design review platform, today announced it has raised $5.9 million in seed funding, led by Uncork Capital with participation from Peterson Ventures and Xfund, alongside strategic angel investments from founders and senior executives at OpenAI, Opendoor, CBRE, Zillow, and more. Buildcheck’s AI platform analyzes construction drawings across all major disciplines — architectural, structural, civil, mechanical, electrical, and plumbing — performing hundreds of checks that detect errors, omissions, and coordination issues, catching costly conflicts human reviewers typically miss. Already serving more than 50 paying customers, including AvalonBay Communities and Novo Construction, Buildcheck delivers 10–35x ROI by preventing field issues during pre-construction. “Every missed issue in a drawing becomes a surprise expense on-site,” said Joe Kirchofer, senior vice president – Northern California, AvalonBay Communities. “We traditionally performed manual drawing reviews of our large projects, but we were looking for a more efficient method. Buildcheck helps us reduce risk and make better use of our time and capital.” The startup has already won awards on an international scale, including the Cemex Construction Startup Competition 2025, EllisDon 2025 ConTech Accelerator, Cityscape Global 2025, 2025 Buildex Alberta, and the 2025 Setia AI and PropTech Innovation Challenge (powered by Ibex). “General contractors and commercial real estate developers are facing increasing challenges with design quality, accuracy, and errors, and we could not be more thrilled with the response and rapid adoption of our technology, saving our customers time, money, and headaches throughout the pre-construction process,” said Alexander Michalatos, CEO and co-founder of Buildcheck. Michalatos’ background includes managing technical scopes on major construction projects, such as Canada’s $600 million North Island Hospitals. Michalatos and co-founders Andrei Molchynsky and Alex Gureev combine deep construction management experience with advanced AI development to bridge the persistent gap between how projects are designed and how they’re built. “Our AI analyzes 2D drawings like an experienced construction professional — but faster, more consistently, and across every discipline simultaneously. Our technology isn’t just automating review; it’s setting an entirely new standard of accuracy and efficiency in pre-construction, and it’s rewarding to see the industry embrace an innovation we’ve made possible,” said Gureev, who leads the company’s AI development. “Our customers are catching issues that would have cost them hundreds of thousands of dollars in change orders and delays. Beyond quality control, Buildcheck turns design reviews into an investment — helping teams move faster, reduce RFIs, and protect margins,” added Molchynsky. The company’s AI models continue to improve through collaborations with leading research institutions, including MILA and AMII, as well as expert advisors from OpenAI, ServiceNow, and Oxford University. “Construction is a $12 trillion market where design errors create more than $200 billion in waste each year,” said Amy Saper, partner at Uncork Capital. “Buildcheck combines deep domain expertise with a computer vision platform that catches issues in drawings early, before they turn into costly problems in the field. They’ve built an elegant and effective AI application that is already delivering measurable ROI for general contractors, developers, and designers, tightening review cycles and improving accuracy where it matters.” The funding will accelerate Buildcheck’s AI model development, grow its engineering and operations teams, and expand the platform’s feature-set to continue exceeding customer expectations.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #181

Sitewire Launches BudgetIQ™ and PermitIQ™ to Make Pre-Construction Risk Standardization the Default LAFAYETTE, Calif., Dec. 10, 2025 -- Sitewire, the draw management and inspections platform for construction finance, today announced the launch of BudgetIQ™ and PermitIQ™, two products designed to standardize pre-construction risk checks before budgets are locked and money moves. BudgetIQ™ validates borrower budgets line-by-line using regional cost benchmarks, while PermitIQ™ flags permit triggers across more than 20,000 jurisdictions and surfaces permitting triggers, requirements, fees, and active filings for a given property. Built to address the two most significant sources of friction at the start of a project, financial accuracy and regulatory readiness, the products deliver a faster, clearer go/no-go and reduce costly surprises mid-build. “Too many deals stall because budgets are guesswork and permit requirements—especially in heavily regulated states like California—are a byzantine maze of regulations,” said Bryan Kester, Co-Founder and CEO of Sitewire. “With BudgetIQ™ and PermitIQ™, we turn guesswork into math and map out the permit path up front, so lenders fund with confidence, builders avoid false starts, and crews stay productive.” BudgetIQ™ reviews borrower budgets against 80M+ local cost records from Sitewire’s inspection business and recognized references (e.g., NCE) to produce low–high spend ranges by line item. Builders and Lenders can add confidence with an optional independent GC-verified take-off. The system helps teams avoid maintaining $3k–$5k/year manual costing catalogs, hours or estimation and takeoffs, and leverages Sitewire’s real-time draw inspections and valuation data from every locality in the country. PermitIQ™ analyzes the proposed scope to instantly flag permit triggers across 20,000+ jurisdictions, utilities, and agencies, and provides process maps, fees, and contacts. It also surfaces active permits already filed for the property—helping teams spot conflicts early and mitigate 1–30 week delays that can derail schedules and strand crews. “Pre-construction wins are financial and regulatory,” Bryan added. “BudgetIQ™ fixes the first; PermitIQ™ fixes the second. Together, they create a predictable path to day one on site. For construction financiers, idle days translate into profit leakage and potential failure.” Both products are integrated into the Sitewire platform alongside Virtual Inspections (same-day, licensed GC review with GPS/sensor/AI fraud detection) and Draw Management. Lenders and other construction financiers can go live in 24 hours, require no internal IT, and scale with white-glove support. BudgetIQ™ and PermitIQ™ are available today for Sitewire customers.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Industry News

January 2026 #18318 Page #182

Statistics Canada: Building Permits, October 2025 December 12, 2025—In October, the total value of building permits issued in Canada rose $1.8 billion (+14.9%) to $13.8 billion. The increase in construction intentions was led by the residential sector (+$1.1 billion). An increase was also observed in the non-residential sector (+$702.8 million). On a constant dollar basis (2023=100), the total value of building permits issued in October grew 14.9% from the previous month and was up 5.9% on a year-over-year basis. Ontario’s multi-family component leads residential sector increases In October, residential construction intentions increased $1.1 billion (+14.6%) to $8.6 billion. Ontario (+$882.6 million) contributed the most to the national growth. The multi-family component grew $1.0 billion to $5.9 billion in October. The largest increase was recorded in Ontario (+$876.4 million), specifically the Toronto census metropolitan area (CMA) (+$408.9 million), followed by Quebec (+$81.4 million). Overall, seven provinces and one territory contributed to the increase in this component. The single-family component was up $47.0 million to $2.6 billion in October, with the gains being primarily attributed to Alberta (+$28.7 million). Across Canada, a total of 24,300 multi-family dwellings and 4,100 single-family dwellings were authorized in October, marking a 13.6% increase from the previous month. Year-to-date, the average number of multi-family dwellings authorized is 21,500 per month, up from 19,100 during the same period in 2024. Commercial and institutional components lead increase in non-residential sector In October, the value of non-residential building permits rose $702.8 million to $5.3 billion. The commercial component (+$394.9 million) drove the increase, followed by the institutional component (+$311.8 million). Meanwhile, the industrial component edged down $3.9 million. In October, commercial component gains were led by Ontario (+$392.3 million), specifically permit values for office buildings in the Toronto CMA. Meanwhile, decreases in six provinces and two territories moderated the gains in the component. The increase in the institutional component in October was driven by British Columbia (+$132.2 million), with eight other provinces posting gains. In October, the industrial component experienced a minor decline, mainly attributed to Quebec (-$118.6 million). Gains from Ontario (+$71.2 million) and British Columbia (+$24.4 million) mitigated the component’s decline. To explore data using an interactive user interface, visit the Building permits: Interactive Dashboard. For more information on construction, please visit the Construction statistics portal. For more information on housing, please visit the Housing statistics portal. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Advertiser Directory

623-512-6770

888-485-8623

ben@4wardconsult.com www.4wardconsult.com 4Ward Solutions Group

info@buymetrics.com www.buymetrics.com BuyMetrics®

412-262-3225

214-929-9386

cvillella@acceptlease.com www.acceptlease.com Acceptance Leasing & Financing Service, Inc.

kenneth@cadynce.com www.cadynce.com Cadynce

507-864-2220

800-743-9727

sales@acerinc.com www.acerinc.com Acer Inc.

general@clark-ind.com www.clark-ind.com Clark Industries, Inc.

941-713-4395

800-353-0892

● ● ●

PlanSwift Lumber and Building Material Takeoffs Truss and Wall Panel Design Experienced Staff EWP Layouts and much more!

612-521-9193 tom@eidemachinery.com www.eidemachinery.com Eide Machinery Sales, Inc.

800-799-4711 info@element-equipment.ca www.element-equipment.ca Element Equipment by GOW Group Inc.

719-528-5445

rfitzgerald@fitzgroup.com www.fitzgroup.com Fitzgerald Group, LLC

800-289-5627

info@ct-darnell.com Dave.AllPoints@gmail.com Staff www.ct-darnell.com www.AllPoints.Tech Your Solution for Lack of Technical CT Darnell Construction All Points Technical All Points was launched by Industry Veteran Dave Walstad with over 20 years of Offshore Experience to create the Gold Standard in Technical Support Teams.

twm@hiring-zone.com

www.hiring-zone.com Hiring-Zone

Dave.AllPoints@gmail.com

1-941-713-4395

www.AllPoints.Tech

Offices in: Panama City Beach, FL USA HCMC (Saigon), Vietnam Bengaluru, India

January 2026 #18318 Page #183

Eliminate your lack of technical resources to grow sales and increase the clock speed of your company. We have the network and experience you can count on. Deploy Technical Teams from All Points!

AN ITW COMPANY

800-521-9790 mschwitter@alpineitw.com www.alpineitw.com Alpine PHONE: 800-289-5627

800-521-3245

813-754-1665

connect@eaglemetal.com www.eaglemetal.com Eagle Metal

info@holtecusa.com

www.holtecusa.com HOLTEC USA Corporation

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Advertiser Directory

435-654-3028

866-726-7587

416-888-4457

steve@hundeggerusa.com www.hundeggerusa.com Hundegger USA

sales@panplus.com www.panplus.com Panels Plus

edmond.lim@limteksolutions.com limteksolutions.com LimTek Solutions

800-325-8075 980-404-0209 richard@rafterswalls.com www.woodretriever.com JAX, The Wood Retriever

customerservice@mii.com www.mitek-us.com MiTek USA

January 2026 #18318 Page #184

423-225-2331 salessupport@paragontruss.com www.paragontruss.com Paragon

Read Now

Presents

Truss Tales Stories and posts on the truss and components industry Let us know if you would like to contribute to this online forum PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

January 2026 #18318 Page #185

Advertiser Directory

800-237-5161 sales@precisionequipmfg.com www.precisionequipmfg.com Precision Equipment Truss Trailer Manufacturing

The Hain Company

530-295-8068

Home Hain Engineering Services Company Overview

707-333-4507 sales@ROGworx.com www.ROGworx.com ROGworx Automation

Welcome

907-230-8276

sales@thehaincompany.com info@vektausa.com Welcome to The Hain www.thehaincompany.com Company's website! Herewww.vektausa.com you will find information The Hain Company Vekta USA about the Hain Company

Products Companies We Represent

800-289-5627

Hain Racing Products

mail@thejobline.com Request Form www.thejobline.com Contact Us TheJobLine.com

and its line of innovative products that can help streamline your company. Our products are diversely used throughout the manufacturing industry to speed production and reduce labor costs.

800-382-0329

News

sales@wasserman-associates.com www.wasserman-associates.com Wasserman & Associates

Mailing List

Used Products Leasing & Financing Services About Hain Racing

800-999-5099 web@strongtie.com www.strongtie.com Simpson Strong-Tie

866-647-7771 sales@spida.com www.spida.com Spida Machinery USA

916-276-7226

770-922-8000 www.tpinspection.com Timber Products Inspection

603-748-1051

gregory.bates@westfraser.com www.strengthinlumber.com West Fraser

The New (JSMEA) or Job Site Measuring System has been released for production.

New Videos

todd@todd-drummond.com Folding Measuring System info@wolfxmachina.com www.todd-drummond.com Overview: www.wolfxmachina.com Todd Drummond About the Hain Company Wolf X Machina Consulting, LLC. Products: Hain System Framer Measuring System (Includes the ELMH and MMEA) Folding Measuring System

http://www.thehaincompany.com/[1/7/2012 12:47:58 PM]

833-TEKWOOD connect@techwoodtreatments.com www.techwoodtreatments.com TechWood PHONE: 800-289-5627

800-568-7423 ext 133 LowellT@merrickmachine.com www.triadmachines.com Triad | Merrick Machine

765-751-9990 info@woodtechsystems.com www.woodtechsystems.com Wood Tech Systems, Inc.

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Hiring-Zone

January 2026 #18318 Page #186

job opportunities available

For Information on Any of these Job Opportunities Visit: www.Hiring-Zone.com Production Manager

HZ00027 | Florida, USA

HZ00023 | Wisconsin, USA

HZ00026 | Alabama, USA

A leading provider of building materials is seeking an experienced Wall Panel Designer to join its expanding design team. This is a full-time in-offic... Today Designer-Truss

# About the Company: Our client is a small but growing truss and engineered wood product (EWP) manufacturer specializing in agricultural, single-f... 2 months ago Designer-Truss

HZ00024 | Colorado, USA

HZ00022 | Wisconsin, USA

Truss design using MiTek software responsible for designing accurate and structurally sound roof and floor truss systems for single-family and multifa... Today Designer-Multifamily

Company Overview Our client is a leading provider of high quality truss systems, specializing in innovative solutions for agricultural and residen... 2 months ago Designer-Truss

We’re seeking an energetic and knowledgeable leader to manage truss production—or to step up into management if you have strong experience supervising... Today Designer-Truss and Wall Panel HZ00018 | Arizona, USA Under the direction of the Design Manager, the Structural Designer at FrameTec is responsible for creating structural designs and project estimating f... Today Estimator HZ00019 | Texas, USA

HZ00017 | Texas, USA

A growing building components We are seeking a seasoned manufacturer in Texas is hiring Lumber Estimator with hands-on an experienced Truss Designer expertise in structural framing for an in-office role, with potential take-offs for both residential and flexibility for remo... light commercial proje... Today Today Outside Sales Representative/ Outside Sales Representative Designer/Estimator HZ00021 | Wisconsin, USA

HZ00025 | Alabama, USA

We are looking for an experienced Truss Designer with at least three years of experience to design roof and floor trusses for agricultural projects an... Today Inventory Control Specialist

This position offers an exceptional opportunity to join a well-established building materials supplier launching a new truss manufacturing division. T... Today Design Manager

HZ00028 | Texas, USA This Inventory Control Specialist with Synergos Lumber + Truss in Gonzales, TX, is responsible for accurately maintaining inventory levels and associa... Today Designer-Wall Panel

HZ00002 | Florida, USA We’re seeking an experienced Truss Design Manager to lead and mentor a team of truss designers for a well-established manufacturer in Central Fl... 2 months ago Outside Sales Representative/ Designer/Estimator

HZ00004 | Florida, USA A leading provider of building materials is seeking experienced Truss Designers to join its growing design team. This is a full-time position with rem... 2 months ago Outside Sales Representative HZ00012 | New York, USA Engineered Wood Products OSR/ Specialist : We’re looking for a results-oriented Outside Sales Representative to drive sales of engineered wood prod... 2 months ago Designer-Multifamily HZ00008 | Texas, USA We have a client in Texas who needs Remote Multifamily Truss Designer(s) familiar with the Houston, San Antonio, Austin, and DFW areas. In addition to... 2 months ago

Building Components Manufacturing Industry

Job Board Employer to Candidate

Direct Hiring!

No Recruiting Fees! Post Your Opportunity Candidates Respond

Directly to You! For Additional Information twm@Hiring-Zone.com or Call: 800-289-5627 x1 Visit our website: www.Hiring-Zone.com Available Subcontractors

Designer-Truss and Wall Panel Contractor California, United States ANSI/TPI 1 Quality Assurance Consultant North Carolina, United States Business Operations Consultant Missouri, United States Designer - Multifamily Subcontractor Texas, United States

The Hiring Zone is operated by TheJobLine.com, Inc. All applications are sent exclusively to the job poster and not to TheJobLine.com. PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

MII.COM/CM

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #188

TheLast Word (When) Will AI Overtake the Truss Industry? Joe Kannapell, P.E.

rtificial intelligence (AI) has been 70 years in the making since eminent AI pioneer, John McCarthy, coined that term in 1955 to describe “the capability of a machine to imitate intelligent human behavior.” Truss software has been 50 years in the making, with scant penetration of AI technology into truss software over that time. So why, now, does its entrance seem eminent? The primary reason is that we hear a steady drumbeat of AI innovations in movies, music, and so many other facets of life. And we naturally assume that innovation in the truss business will follow this prevailing trend. While we must continue to study AI technology and assess where it may be used to improve our industry, we also need to understand how its development is radically different than prior innovations. AI is typically constructed using vast quantities of industry data – which is something that truss plants, unlike many other businesses, generate daily, adding many millions of computer bytes to the billions of bytes of data that has already accumulated on servers. So, at least our industry has built a basis for the development of AI technology. But is that data easily accessible and does it contain adequate information upon which to base AI efforts? Although the quantity of available truss data may be adequate, the data files themselves must be well organized and properly documented. Typically, organizations that have mastered the filing of repetitive work, like that of national single family and apartment builders, have well organized and identified data files. But there are also companies that undertake highly customized work that have their own excellent computer-based filing systems. The quality of data files is of overriding importance because that is what will be used to “train” an AI system. But truss files normally contain only the estimated labor cost and not the actual labor hours expended, so they will be of limited use only in determining optimal truss configurations, even after examining millions of different designs. Furthermore, such a system needs to include the type of equipment used, so the value of past labor data will be diminished after new automation is added to a plant. Even so, now is the time for plants to increase the usefulness of truss data files by adding actual labor hours expended, which will allow a meaningful reconciliation of actual-to-expected costs for present and future uses. Individual truss data files, when matched with labor data, may aid in automating selection of optimal configurations, but they usually lack information regarding adjacent trusses, unless they are girders. Because trusses are built in batches, a better approach would be for an AI system to be based on the entirety of a job, which would involve using roof and ceiling shapes as a basis. Countless manual efforts have gone into developing such a job costing system, but with limited results. Parameters such as the length of ridgelines and hip-lines, pitches, heel heights, and other geometric features all play into the difficulty of a job. However, the location Continued next page

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

Th e

Component Manufacturing dverti$ dverti $ er

Don’t Forget! You Saw it in the

Adverti$$er

January 2026 #18318 Page #189

of tray ceilings and interior load bearing walls must also be considered. At the recent SBCA Open Quarterly Meeting, Joe Hikel discussed the need to assign geometric characteristics to each layout that would aid in comparison to prospective work. This approach taps into the fundamental advantage of AI in transforming complex data from multi-dimensional spaces into machine-readable formats, by utilizing pattern recognition and vectorization capabilities. However, can such systems “learn” how to frame every conceivable geometric shape, such as that shown? And would legacy truss layout software have a better chance extending its auto-framing capabilities than by developing exceedingly complex AI approaches? Despite the apparent complexity of developing AI software, it appears that the truss industry may be lagging behind other developers, based on Craig Webb’s recent article, “AI is Altering the Takeoff Process Dramatically. Some Changes Could Cut You Out of the Sale.” In it, Craig references Home Depot’s AI-powered Blueprint Takeoffs tool and discusses the risk that this capability poses to building supply outlets and LBMs; a risk he could have extended to truss operations. He also lists multiple third-party software providers like Aximos, Flitch, and Seljax that are being used by building material suppliers, some of whom claim to be leveraging AI tools. But it appears that these are new entrants in the building industry, and their claims beg the question as to the source of the data upon which their purported AI software was based. Craig also reports that, “Vendors are working on programs that will compare prices for the materials requested with the cost of alternative building methods – I-joists vs. open-web floor trusses, for example.” While this comparison can be accomplished without the use of AI tools, this claim deserves further investigation. Yet it clearly illustrates the continual encroachment of third-party software into the truss world, often under the guise of AI capabilities. There is no denying that AI technology is advancing at a staggering rate, but determining its eventual place in the truss business requires understanding of many new and unfamiliar technologies, such as agentic architecture, machine learning, retrieval-augmented generation (RAG), agent-toagent (A2A) communication, etc. Yet, I suggest that we look at AI as just the next logical step, albeit a huge leap, in the evolution of computer software. In determining what it takes to make that leap, I also suggest that the companies who have developed the best truss software have the best foundation for success in AI (see my Truss Tales post, “Was Warren Buffett Wrong,” for more insights on our industry’s software development). However, they will need to partner with the component manufacturers who have the best stores of data upon which to base AI development. This isn’t a novel approach. In fact, it follows the familiar 50-year-old model for the development of truss software, which requires a large group of users to collaborate closely with expert software developers. If my analysis here is remotely accurate, we can expect to see gradual and not gamechanging adaptations of AI technology in the truss business over the next decade and beyond. In the meantime, many dozens of high-level AI developers will gain employment, and not at the expense of the contribution of a largely intact army of truss estimators and designers.

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

EVERY CUT COUNT MAXIMUS ® High-Volume Precision Crosscutting with Integrated Package Aligner and Loop Bander

AUTOCUT ®

High-Volume Automated Crosscutting with programmable PLC Controls

SELECUT ®

High-Volume PET and Market Premium Length Crosscutting with Integrated Power Package Squeeze

TRANSCUT ® II SERIES

Portable Saws priced from $8,990*

Stationary Systems priced from $31,999*

holtecusa.com

January 2026 Component Manufacturing Advertiser Magazine