LINUS6.4

PRELIMINARY LINUS6.4

Four-channel DSP networkable installation amplifier

LINUS6.4-i 6000W, 4 channel installation DSP amplifier.

LINUS6.4-iD 6000W, 4 channel installation DSP amplifier with Dante integration.

Overview The LINUS6.4-iD is a four-channel DSP networkable installation amplifier delivering 4 x 1500 W of clean power in a convenient and lightweight 19”/1U package.

Advanced Class D discrete power stages with DC-coupled DACs, together with a highefficiency SMPS with PFC to provide unrivalled power density and minimal thermal dissipation.

The innovative PCB layout design integrates DSP, four amplifiers, and SMPS on a single PCB for enhanced sound quality, pinpoint control, and rugged protection.

The four audio inputs are selectable, you can choose between analog, LiNET, Dante digital audio network and simply and easily route to any of the four outputs via the input matrix.

The advanced DSP processor enables the integration of sophisticated audio algorithms including phase linear DS-FIR filters, these provide perfect linearity and superior sound performance, plus advanced look-ahead and frequency-dependent limiters. The end result is increased system headroom and sonic fidelity, even under heavy use conditions.

Features

Integrated DSP, network, and amplifier solution in compact 1RU format C 4x1500W@2Ω or 2x3000W@4Ω or 1x3000W@4Ω + 2x1500W@2Ω C Powers either 70/100V and low impedance loudspeakers C 4 balanced analogue inputs C LiNET – 8x freely configurable digital audio signals over CAT5e C Dante redundant (LINUS 6.4-iD only) C PoE on the control port, in case of mains power loss, the control section still functions C Phoenix inputs and outputs C Configurable GPIO C Front panel IPS display (240x240 pixels) C Front panel control C LINUS Control – full network control and monitoring of amplifiers over Ethernet C LINUS App – full amplifier control and monitoring via mobile device using internal wi-fi hotspot C Optimised factory presets for all CODA Audio loudspeaker systems (except N-RAY, ViRAY, CiRAY, AiRAY, and sensor subwoofers) C 5-year warranty

LINUS App

LINUS Control

Specifications Power output: C 4x1500W@2Ω / 2x3000W@4Ω / 1x3000W@4Ω + 2x1500W@2Ω Audio processing + input sources: C 64 bit DSP C 4ch analog input with ESS Sabre ADC C 4ch Dante inputs factory fit option card (redundant) C Linet input/buffered output Output stage: C Class D discrete power stages with DC-coupled ESS Sabre DAC Power supply: C 100-240VAC nominal input voltage C Power factor correction C Soft start C Regulated C Output voltage on-demand controlled by the audio DSP C Idle power consumption of the amplifier <20W Backup power: C When the amplifier is fed with a PoE power supply on the control port, the control section stays functioning in the event of a power outage (except the power stage) C When the mains power reconnects, the audio output will resume in three seconds Control: C Quad-core ARM 1.2Ghz C Linux OS C 240x240 pixel IPS display C Controlled via the front panel, Linus App or Linus Contol C Ethernet network Protection features: C Main over/under voltage <80Vac, >263Vac C Short circuit C Power average limiter C Overcurrent soft limiter C Power supply overload C DC Weight and Dimensions: C Weight: 5.75 Kg C W 483mm x D 345mm x H 44mm (size including back mounting ears)

CODA Audio GmbH Boulevard der EU 6, 30539 Hannover, Expo Park, Germany Phone: +49 (0)511- 866 558 88 Fax: +49 (0)511- 866 558 87 E-Mail: contact@codaaudio.com Website: www.codaaudio.com

E&OE