Dovetail Drawer Boxes 2025
To Our Valued Customers,
Cal Door & Drawer takes pride in delivering a quality product on time. In order to ensure this, we have automated all of our notifications.
ORDER CONFIRMATIONS:
Order confirmations will be emailed to you. Once your order has been placed order confirmations will be emailed the next business day. We have the ability to store as many email addresses as you need.
You have until 12:00PM of that business day to advise us of any errors on our part due to data entry.
Once order(s) are in production, any cancellation or changes on your part will be subject to charges based on materials already cut.
ANY MISC or rush order shipping in 5 days or less; no changes can be made.
SHIPPING NOTIFICATIONS:
Shipping notifications will be emailed the day your order ships. Information included on this is your job #, job name, truck route or tracking information along with carrier.
Due to the short lead times, all order(s) placed are processed for manufacturing the same day. The following day, all orders processed are in production. There are hundreds of orders which leads to thousands of line items entered daily.
Please be sure to review your order confirmations when you receive them. By doing this, it will save time and cost for any potential errors.
Thank you
Edward J. Rossi
Table of Contents
Credit Terms:
A complete and current credit application must be submitted before any terms of payment will be authorized. Without a current signed credit application, sales terms will be CIA (Cash In Advance). Account terms and credit limit will be established based on credit history, bank information and sales volume. Open account terms can take up to two weeks to process. All orders for new customers and inactive accounts will require pre-payment until credit terms have been established. If orders exceed the established credit limit, a deposit may be required. A current, signed resale card must be on file or sales tax will be charged.
Cal Door & Drawer will only accept check payments by fax or email (not regular mail). CHECKWRITER is a program that allows you to fax or email your check for payment, rather than mailing it. For more information please contact our credit department.
Credit Card Transactions:
We currently accept Visa, Master Card, American Express and Discover. Credit card transactions require a completed credit card authorization form. This form requires copies of your drivers license and the front and back of your credit card for verification. This is required for your protection as well as ours. We do not share credit card information with anyone.
Third Party Credit Card Transactions:
All required information for standard credit card transactions apply.
An additional authorization form will be required verifying total cost of job prior to production.
CHECKWRITER and Credit Card payments must be received prior to doors being shipped.
Delivery Policy:
Handling:
Handling charge $1.00 per piece. This charge applies to all orders, whether it is will-call, delivery by our truck, Common Carrier, Fed Ex, On Trac or UPS.
Will-Call:
Will-call orders are to be picked up at our manufacturing facility @ 105 Cochrane Circle, Morgan Hill, CA 95037. Will-call orders are to be picked up at our manufacturing facility @ 1800 Abbott Street, Salinas, CA 93901. Will-call orders are to be picked up from 6:30 am – 2:30 pm, Monday thru Friday Orders that were originally scheduled for will-call cannot be changed to delivery on our truck without authorization.
Our Truck:
All shipments delivered on our truck in California will be charged a $100.00 delivery fee. Arizona and Nevada shipments delivered on our truck will be charge a $150.00 delivery fee. Our trucks deliver to major metropolitan areas. Shipments are determined by volume of orders in each area.
Re-Delivery Fee – Our Truck:
Re-deliveries will be charged a second delivery fee. This fee will only be charged if the original delivery was unsuccessful between the hours of 7:00 am – 5:00 pm on your delivery date.
Fed Ex, On Trac & UPS:
Orders of 12 pieces or less, or $300.00 or less, are subject to shipment via Fed Ex, On Trac or UPS.
Customer is responsible for all packaging materials and Fed Ex, On Trac or UPS charges.
Common Carrier:
Orders exceeding 12 pieces are subject to being shipped via Common Carrier and assessed a pallet fee. Customer is responsible for all packaging materials and freight charges.
Fed Ex, On Trac, UPS & Common Carrier Claims:
Any damage to outer packaging must be noted on the bill of lading and brought to the attention of the carrier
Take pictures of all damaged exterior packages and keep all packaging material.
Photos of damaged product and packaging are required to file a claim.
Contact your customer service representative immediately and submit all information in order to file a claim.
Do not throw away product or packaging until claim has been resolved.
Sending us a photo only of a damaged door is insufficient information.
We cannot file a claim unless you have followed the guidelines listed above.
Ordering Procedures:
Orders must be submitted as FINISHED SIZE for standard 15mil thickness. For Cabinet Software programs utilizing a deduction for 1/2” material, we will adjust your drawer box by adding 1/8” to your width. This will accommodate our 15mil standard thickness. You must check the appropriate box on our order form.
An order confirmation will be emailed to you the next business day. Orders may be faxed, emailed, or can be placed online 24 hours a day. We request all orders to be placed on a Cal Door & Drawer Order Form.
We can accept your computer generated cut lists as long as you complete all the details of the order form except for sizes.
When sending in computer cut lists, it is the customers responsibility to highlight and separate all different materials, drawer styles, and details.
Special instructions should be clearly communicated in writing at the time the order is placed. Standard lead time is 5-12 working days.
No changes can be made once an order has been placed and confirmed. You will always receive an order confirmation and delivery date.
If you do not receive an order confirmation within 24 hours, please notify your Customer Service Representative.
Do not resend your order without speaking to your Customer Service Representative first, as this can and will lead to duplicate orders.
If you are requested by your Customer Service Representative to resend an order, please indicate on the top of the order or in special instructions that this is a RESENT ORDER – DO NOT DUPLICATE.
Faxed in Orders:
Please fax orders in only once to avoid duplicate orders.
If you receive a fax transmission error, contact your Customer Service Representative to verify if order was received. If you are requested by your Customer Service Representative to resent an order, please indicate on the top of the order or in special instructions that this is a RESENT ORDER – DO NOT DUPLICATE.
Phone in Orders:
We take and read back all sizes “width x depth x height” (WxDxH). When your order is read back, you are responsible for verifying that the sizes and specifications are correct. We strongly suggest orders be placed by Fax, Email or Online to avoid read back mistakes.
Quotes:
Please indicate on top of order form or in special instructions “QUOTE ONLY”. Generally, most quotes are done the same day as received. If it is a special or large request it may take longer. Quotes are valid for 30 days from receipt.
General Pricing:
All prices are per square foot, figured to the nearest 1/100th of an inch. Minimum invoice charge is $25.00. Prices are subject to change without notice.
Calculating Box Price
• Standard Dovetail Boxes come assembled at 2 1/4", 3 1/4", 4 1/4", 5 1/4", 6 1/4", 7 1/4", 8 1/4", 9 1/4", 10 1/4" or 11 1/4" heights.
• Taller and custom heights are available in 1/4”, 1/2", 3/4" and 1" increments, allow two additional manufacturing days.
• Please note on custom heights we cut down from existing stock, bottom edge will not be finished.
• If drawer box height is not listed refer to next larger size (Example: 3 3/4" height will be priced at 4 1/4" height).
• 9-Ply and 11-Ply Birch drawer boxes come standard prefinished.
• All solid boxes come standard 15mil (0.590") thick and prefinished.
• For Cabinet Software programs utilizing a deduction for 1/2" material, we will adjust your drawer box by adding 1/8" to your width. This will accommodate our 15mil standard thickness. Your must check the appropriate box on our order form.
• Recommended 3/8" thick bottom on all boxes over 30" in width: add $10.00 per drawer box.
• Bottoms are placed 1/2" up from bottom of sides to allow for undermount guides.
• Drawer boxes come standard with eased top edges.
Eased Top Edges
Kit includes one solid Maple 15mil full size drawer box. One 9-Ply Birch cut out as shown in photo. $35.00 charge for kit, Logo Engraving included. Logo must be submitted in the following formats: Adobe Illustrator, PDF (High Resolution), JPG, TIF, DWG or DXF.
Finishing: All material used in our drawer boxes come with a water-based UV finish. Any request for UNFINISHED boxes must be noted on order.
Sample Drawer Box Kit
Any request for UNFINISHED boxes must be noted on order
• MAXIUM HEIGHT FOR ALL DRAWER BOXES IS 28”.
• Standard Dovetail Boxes come assembled at 2 1/4", 3 1/4", 4 1/4", 5 1/4", 6 1/4", 7 1/4", 8 1/4", 9 1/4", 10 1/4" or 11 1/4" heights.
• Taller and custom heights are available in 1/4”, 1/2", 3/4" and 1" increments, allow two additional manufacturing days.
• Please note on custom heights we cut down from existing stock, bottom edge will not be finished.
• If drawer box height is not listed refer to next larger size (Example: 3 3/4" height will be priced at 4 1/4" height).
Recommended 3/8" thick bottom on all boxes over 30" in width.
• Special materials available: (Example Walnut, African Mahogany, Rift White Oak, Beech, Alder etc.) call for pricing.
Drawer Boxes with 1/4” bottom: standard no extra charge
Drawer Boxes with 3/8” bottom: Add $10.00 per drawer box
*Scoop Option: 6 1/2” x 1 1/2” (No Custom sizes available)
● Standard 4” X 2” Circle Scoop radius can be modified
● Standard 4” X 1” Square Scoop depth and width can be modified
● Standard Scoop placement: center on front of drawer box
● Drawing required for all custom Scoops
* “Scoop Option” only available as shown above.
Circle
Add $30.00 per drawer box
● Minimum height applies to back
● Front height is standard at 2 1/4"
● Available with scoop: Add $8.50 per drawer box
Add $30.00 per drawer box
● Minimum height applies to back
● Front height is standard at 2 1/4"
● Drop will start approximately center of drawer box
● Available with scoop: Add $8.50 per drawer box
Add $30.00 per drawer box
● Minimum height applies to back
● Front height is standard at 2 1/4"
● Radius will start and drop 1/3rd from back of drawer box
● Available with scoop: Add $8.50 per drawer box
Add $30.00 per drawer box
● Available with scoop: Add $8.50 per drawer box
(0.590") 7 16 " Drawer Side 1 4 " Drawer Front Top View
U-Shape
Add $125.00 per drawer box
For additional opening: Add $15.00 each
● Single divider is centered
● Double dividers are equally spaced within inside drawer dimension
● Dividers are same thickness as the sides of drawer box
● Dividers are available both removable or fixed (must specify)
Single Letter: Add $20.00 per drawer box
Single Letter & Legal: Add $30.00 per drawer box
Double Letter & Legal: Add $50.00 per drawer box
● 1" wide anodized file bars included
● Extra 1” wide anodized file bars available: $15.00 each
● Notching location starts 1/2" from front or side
● Special notching available, drawing required
Front
Stand Standard shelf support holes 2” OC.
Standard shelf support holes 2” OC. Shelf supports not provided.
Fixed and adjustable Spice Racks come with one shelf/box. If multiple fixed shelves requested, drawing required for quote. hole Additional shelves available: use standard drawer box pricing.
Price is based on a standard 16” x 21” x 10” box as shown in pictures below Custom sized boxes will be quoted based on drawings and interior specs provided.
T51.1801 L for Blum Tandem 563
T51.1801 R for Blum Tandem 563
● for use with standard application
● self adjusting drawer length tolerance
● minimum inside drawer width 4 7/8”
T51.1901 L for Blum Tandem 563
T51.1901 R for Blum Tandem 563
● side adjustment +/- 1/16”
● height adjustment + 1/8”
● minimum inside drawer width 6 11/16”
BT51.1901.PS
● self-adjusting drawer length tolerance
● minimum inside drawer width 6-11/16”
● height adjustment +1/8” (3mm)
● side adjustment +/-1/16” (1.5mm)
● depth adjustment +3/32” preset at 0
● minimum sub front thickness 1/2”
● integrated 1/8” distance bumper for SERVO-DRIVE applications
Standard Notch for Blum Tandem when using Blum Tip-On Series Tandem drawer slides not provided
BT51.7601
● self-adjusting drawer length tolerance
● Minimum inside drawer width 6-11/16”
● side adjustment +/- 1/16”
● designed for 1/2” drawer bottom recess
Standard Notch for Blum Movento Series Movento drawer slides not provided
Standard Notch for Blum Movento Series when using Blum Tip-On Movento drawer slides not provided
A 710.011 R for Salice Futura 7555
A 710.013 L for Salice Futura 7555
● for use with standard application
● minimum inside drawer width 7 3/16”
● height adjustment + 3/32”
A 750.011 R for Salice Futura 7555
A 750.013 L for Salice Futura 7555
● minimum inside drawer width 6 7/8”
● height adjustment + 3/32”
● side-to-side adjustment +/- 1/16”
● depth adjustment +/- 3/32”
A 720.611 R for Salice Futura 7555
A 720.613 L for Salice Futura 7555
● narrow drawer without side adjustment
● minimum inside drawer width 3 5/8”
1 1/2”
1 1/2”
Salice Narrow Box Clip
Salice 3D Clip
Salice Progressa+ AFCGXX#B
● minimum inside drawer width 8”
● height adjustment + 3/32”
● side-to-side adjustment +/- 1/16”
● depth adjustment +/- 1/8”
● Tilt adjustment + 1/8”
Salice Progressa & Progressa+
Standard Notching for: Salice Progressa 4-Way Adjustable Hardware provided
Salice Progressa 4-Way Clip
Salice Progressa Narrow
1/2” x 1 1/2”
Walnut with Matching Bottom Knotty Pine Scoop Option: 6
White Melamine Bottom Add $5.00 per drawer box.
Cedar Bottom Add $8.00 per drawer box for 1/4” bottom only.
Cherry Teak with Custom Square Scoop
Circle Scoop (4”x2”)
Black Melamine Bottom. Add $8.50 per drawer box per scoop.
Divider with Scoop
Add $15.00 per opening. Add $8.50 per drawer box per scoop.
File Drawer
1” wide anodized file bars included.
Single Vertical & Lateral: Add $30.00 per drawer box.
Double Vertical & Lateral: Add $50.00 per drawer box. Add $15.00 per additional bar.
Bread Box
Add $35.00 per drawer box.
Custom Scalloped Angle with Divider Drawing required for price quote.
Scalloped Angle with Lipped Front & Scoop
Add $30.00 per drawer box for Angle. Add $30.00 per drawer box for Lipped Front. Add $8.50 per drawer per scoop.
Specialty Divider with Options
Specialty dividers are build to your specifications. Please provide a detailed drawing.
Cost are per box price + $15.00 per opening. If scoops are requested: Add an additional $8.50 per scoop.
Jewelry Tray
Add $15.00 per opening.
Tray
Add $15.00 per opening.
Specialty Divider-Box in a Box
Add $15.00 per opening. Installed slides add $30.00
Specialty Divider with Scoops
Add $15.00 per opening. Add $8.50 per scoop.
Several
for quote.
Cutlery
Maple Drawer Box with Walnut Trim
options available: Maple with Walnut trim or Walnut with Maple trim. Call
Kitchen with Corner Drawers.
Slides for Box 2: Knape & Vogt, KV8400 side mount, 100lbs rating, anochrome.
Waste Management Drawer Boxes
Double Lateral Square Suspended Bins
9 or 11 Ply: $150.00 Net Price
Solid Maple: Add $75.00
Two 35 or 50 quart Waste Bins Included. Please specify when Ordering
Waste Management Drawer Boxes also available as shown below:
Waste Management Drawer Boxes
Scalloped with Single Vertical Bin
9 or 11 Ply: $200.00 Net Price
Solid Maple: Add $75.00
One 35 or 50 quart Waste Bins Included. Please specify when Ordering
Scalloped with Double Vertical Bins
9 or 11 Ply: $250.00 Net Price
Solid Maple: Add $75.00
Two 35 or 50 quart Waste Bins Included. Please specify when Ordering
Waste Management Drawer Boxes
Scalloped with Single Lateral Bin
9 or 11 Ply: $200.00 Net Price
Solid Maple: Add $75.00
One 35 or 50 quart Waste Bins Included. Please specify when Ordering
Scalloped with Double Lateral Bins
9 or 11 Ply: $250.00 Net Price
Solid Maple: Add $75.00
Two 35 or 50 quart Waste Bins Included. Please specify when Ordering
Paper Towel Drawer Box
Add $150.00 per drawer box. (Dowel Included)
Under Sink Pull-Out
Add $125.00 per drawer box.
Corner
Add $125.00 per drawer box.
Hair Dryer Drawer Box
Please see page 15 for drawer box specifications
Inside Box width calculation:
For 15mil (0.590”), use Outside box width (W1) minus 2 1/4”. For 12mil (0.470”), use Outside box width (W1) minus 2”.
Paper
Extra Bars available $15.00 each
Angled & Half-Angled Drawer Box Order Form
Corner
Drawer Box Order Form
U-Shaped Drawer Box Order Form
L-Shaped Drawer Box (right) Order Form
L-Shaped Drawer Box (left) Order Form
Vertical Divider Drawer Box Order Form
PER OPENING
Dovetail Drawer Box in Box Order Form
Spice
Rack Order Form
