Page 93

HYDRAULIC FLUIDS

HYDRAULIC

fluids HYDRAULIC

fluid is the energy transfer medium in all hydraulic systems. However, the job of hydraulic fluid goes beyond simple transmission of power. Although transmitting hydraulic energy is the core purpose of hydraulic fluid, it is useful in four secondary functions—heat transfer, contamination removal, sealing and lubrication. Hydraulic machines produce a lot of excess heat in normal operation, often caused by inefficiencies of the components themselves, like pumps and motors. Without a way to carry heat away from these components, they could easily overheat with resulting damage of seals and internal components, especially as a result of low local viscosity. As oil returns to the reservoir, it often passes through a cooler to help maintain optimal temperature range before it is pumped back out to the system. Conversely, hydraulic fluid can carry heat into a system during cold starts when needed. If closed-loop hydraulic systems didn’t bleed off fluid at a controlled rate, contamination would quickly accumulate to critical and damaging levels. Heat can be considered a form of contamination, but hydraulic fluid also carries particles and water away from sensitive components through filters or other conditioning devices, where it is cleaned up and returned to the circuit. Oil without impetus would remain within sensitive components, allowing essentially trapped contamination to slowly destroy its surroundings. Although most believe hydraulic oil is what pieces of hardware—such as O-rings or U-cups—seal against, hydraulic fluid (especially oil) actually provides sealing within the internal components of pumps, valves and motors. A spool valve, for example, has a seal at each end to prevent oil from escaping the valve, but each notch on the spool is sealed from the neighboring cavities by only the tight metal-to-metal tolerances and the oil’s surface tension and resistance to shearing. Lubrication is required in most hydraulic components to protect internal parts from wearing, or even downright melting, as a result of metal-to-metal friction. Oil provides full-film lubrication between moving parts, such as the slippers and lens plate of a piston pump. Without the lubricating properties

www.fluidpowerworld.com

HydraulicFluids_FPWHandbook_V1.indd 91

of oil, hydraulic systems would be inefficient and unreliable. These functions of hydraulic fluid are common to all types, except some water-based fluids, which require special design considerations during engineering. However, the majority of machines use refined or synthetic oil, which are formulated and manufactured to specific test standards for important properties like viscosity, pour point and viscosity index, to name a few. Those three properties are often considered when choosing a fluid for a particular application, which is based on maintaining a specific viscosity throughout a particular set of ambient and machine operating conditions. For example, if ambient temperatures are 6 • 2016

FLUID POWER WORLD

91

6/17/16 9:02 AM

Profile for WTWH Media LLC

Fluid Power Handbook 2016  

Fluid Power World Handbook 2016

Fluid Power Handbook 2016  

Fluid Power World Handbook 2016

Profile for wtwhmedia