24 20
WES-TECH irrigation.ca
Pipe, Fittings, Parts, Pumps, Electrical, Aquatics, Tools and Accessories
625 Alpha Street Victoria, BC V8Z 1B5
893 Van Isle Way Langford, BC V9B 5R8
CONTENTS
FITTINGS.............................................................................................. 6
SCH 40 FITTINGS...............................................................................7 SCH 80 FITTINGS...............................................................................12 INSERT FITTINGS................................................................................13 BLU-LOCK FITTINGS...........................................................................14 PRE-MADE SWING JOINTS.................................................................15 TOOLS AND MISC...............................................................................15 PVC-LOCK FITTINGS...........................................................................16 PRE-MADE SWING JOINTS.................................................................17 MARLEX FITTINGS..............................................................................17 SWING PIPE FITTINGS........................................................................17 RISERS/NIPPLES................................................................................18 BRASS NIPPLES.................................................................................18 BRASS FITTINGS.................................................................................19 PVC DRAINAGE FITTINGS...................................................................19 CHANNEL DRAINS..............................................................................20 EZ FLOW DRAINAGE...........................................................................20 CATCH BASINS....................................................................................21 BULKHEADS & RUBBER FITTINGS....................................................21 HYDRO-RAIN MANIFOLD FITTINGS....................................................22 DURA MANIFOLD FITTINGS...............................................................22 PHILMAC COMPRESSION FITTING....................................................23 CEPEX FITTINGS.................................................................................23 PUSH FIT FITTINGS.............................................................................24 ½” SMART-LOC FITTINGS..................................................................24 GARDEN HOSE FITTINGS...................................................................25 GARDEN HOSE & ACCESSORIES.......................................................26 UNDERHILL GARDEN HOSE...............................................................27 UNDERHILL HOSE BIB.......................................................................27 UNDERHILL PRESSURE CHECKER....................................................27 UNDERHILL QUICK CONNECT / REPAIR...........................................27 UNDERHILL BRASS............................................................................28 UNDERHILL SPRAY NOZZLE / GUN...................................................28 TECHLINE EZ (12MM DRIPLINE).......................................................29 3/8” MICRO FITTINGS........................................................................29 DRIP-LOCK FITTINGS..........................................................................30 DRIPLINE FITTINGS............................................................................30 DAWN QUICK REPAIR FITTINGS.........................................................31 PVC COMPRESSION FITTINGS...........................................................31 VALVES................................................................................................32 PVC BALL VALVES...............................................................................32 CAM-LOCK FITTINGS..........................................................................33 MISCELLANEOUS VALVES..................................................................33 QUICK COUPLER.................................................................................33
BACKFLOW PREVENTION.................................................................... 34
2
REDUCED PRESSURE ASSEMBLY.....................................................34 VACUUM BREAKER & DUAL CHECK VALVES.....................................34
PVC CHECK VALVES............................................................................35 DOUBLE CHECK VALVE ASSEMBLY...................................................35
PRESSURE REDUCERS....................................................................... 36 BRASS STATIC PRESSURE REDUCER................................................36 SENNINGER PRESSURE REGULATOR...............................................37
FILTRATION.......................................................................................... 38 DISK FILTER........................................................................................38 SCREEN FILTER..................................................................................39 DRINKING WATER FILTRATION..........................................................39 PUMPS................................................................................................40
MICRO IRRIGATION.............................................................................. 41 DRIP EMITTER....................................................................................41 FLAG DRIPPER....................................................................................42 MINI BUBBLER...................................................................................42 VARI-JET AND VARI-MIST....................................................................42 SHRUBBLER.......................................................................................43 WING JETS..........................................................................................43 MINI SPRINKLER................................................................................44 SPECTRUM.........................................................................................44 ROTOR MAX........................................................................................45 MINI COMPACT...................................................................................45 DOWN SPRAY......................................................................................45 MICRO SPRAY JETS ...........................................................................46 EXL SERIES FOGGER..........................................................................46 GREEN HOUSE FOGGER & MISTER..................................................47 MINI COMPACT ACCESSORIES..........................................................47 RISER ADAPTER..................................................................................48 CUATRO-FLO BUBBLER......................................................................48 ORBIT BUBBLER.................................................................................49 BUBBLER ACCESSORIES...................................................................49 STAKES AND RIGID RISER.................................................................50 ⅛” AND ¼” MICRO FITTINGS............................................................50 RAINBIRD SELF PIERCING FITTINGS.................................................50 FASTENERS.........................................................................................51 PUNCH TOOLS....................................................................................51
ROTORS................................................................................................ 52 IMPACT ROTORS.................................................................................52 RAINBIRD 3500 SERIES....................................................................52 RAINBIRD 5000/5000 PLUS SERIES...............................................53 RAINBIRD FALCON® 6504 SERIES...................................................53 RAINBIRD 8005 SERIES....................................................................54 WES-TECH MINI PRO GEAR ROTOR...................................................54 WES-TECH SUPER PRO......................................................................55 RPS SELECT........................................................................................55 TORO MINI 8.......................................................................................56 TORO T5 GEAR ROTOR.......................................................................56 TORO 640 GEAR ROTOR....................................................................57
POP UP HEADS.................................................................................... 58 HYDRO RAIN HRS100 & 200 SPRAY HEAD......................................58
3
RAIN BIRD 1800™ SERIES SPRAY HEAD..........................................58 RAIN BIRD 1800™ ACCESSORIES....................................................59 TORO 570 CLASSIC SPRAY HEAD......................................................59 TORO 570 X-FLOW WITH CHECK VALVE............................................60 TORO 570 X-FLOW PR + CHECK........................................................60 IRRITROL I-PRO SERIES SPRAY HEADS.............................................60 R-VAN SERIES ROTARY NOZZLES......................................................61 RAIN BIRD MPR SERIES NOZZLES....................................................61 TORO PRESSURE COMPENSATING NOZZLES...................................63 TORO TVAN VARIABLE ARC NOZZLES...............................................64 IRRITROL I-PRO 9’ STRIP NOZZLES...................................................64 TORO PRECISION™ STREAM NOZZLES.............................................64 PRECISION™ SERIES SPRAY NOZZLES.............................................65 PRECISION™ SERIES PERFORMANCE DATA.....................................66 MP ROTATOR STREAM ROTOR...........................................................67
CONTROLLERS.................................................................................... 69 HUNTER WIFI CONTROLLER..............................................................69 HYDRO-RAIN WIFI CONTROLLER.......................................................70 RAIN BIRD ESP MODULAR CONTROLLER.........................................70 IRRITROL TOTAL CONTROL CONTROLLER.........................................71 IRRITROL KD2 CONTROLLER............................................................71 HYDRO-RAIN CONTROLLER...............................................................72 RAIN BIRD ESP-TM2 CONTROLLER...................................................72 TEMPUS DC CONTROLLER................................................................73 TEMPUS DC CONTROLLER WITH SCREEN........................................73 HYDRO-RAIN BATTERY TIMER............................................................74 RAIN BIRD TBOS™ BATTERY CONTROLLER......................................75 HOSE TIMER & ACCESSORIES...........................................................75 CLIMATE LOGIC™ WEATHER-SENSING SYSTEM...............................76 TORO RAIN SENSORS........................................................................76 REMOTES............................................................................................76 IRRITROL RAIN SENSORS..................................................................76 PRECISION SOIL SENSOR..................................................................77
ELECTRIC VALVES................................................................................ 78
4
IRRITROL 2400 SERIES ELEC. VALVE...............................................78 IRRITROL 205 SERIES ELEC. VALVE..................................................78 IRRITROL 2500 SERIES ELEC. VALVE...............................................78 IRRITROL ULTRA-FLOW ELEC. VALVE.................................................79 IRRITROL 200 COMMERCIAL VALVE.................................................79 IRRITROL CENTURY COMMERCIAL VALVE........................................79 IRRITROL 2700 SERIES COMBINATION VALVE.................................79 TORO P220 SERIES COMMERCIAL VALVE........................................80 HYDRO-RAIN ELECTRIC VALVE...........................................................80 DRIP ZONE KITS.................................................................................80 HRZ100 ALL IN ONE VALVE FILTER PRV...........................................81 RAIN BIRD DV SERIES COMMERCIAL VALVE....................................81 RAIN BIRD PGA COMMERCIAL VALVE...............................................81 VALVE PRESSURE REGULATOR..........................................................82 VALVE SOLENOID................................................................................82 FLOW SENSOR....................................................................................83
LOW VOLTAGE WIRE............................................................................ 84 MULTI-STRAND WIRE.........................................................................84 CONDUIT.............................................................................................84 CONDUIT FITTINGS.............................................................................84 LIGHTING WIRE..................................................................................84 GAUGE WIRE.......................................................................................84 WIRE CONNECTOR.............................................................................85 WIRING DISTANCES IN FT..................................................................85
PIPE...................................................................................................... 86 PVC PIPE.............................................................................................86 CSA DRAINAGE PIPE..........................................................................86 POLY/MUNI PIPE................................................................................86 PEX PIPE.............................................................................................87 FLEX PIPE............................................................................................87 BLU-LOCK PIPE...................................................................................87 DRIP LINE...........................................................................................88 ¼” EMITTER LINE...............................................................................88 MICRO TUBING...................................................................................88 DRIPLINE ACCESSORIES....................................................................89 CLAMPS..............................................................................................89
TOOLS.................................................................................................. 90 ELECTRICAL DIAGNOSTIC EQUIPMENT.............................................90 PIPE CUTTER.......................................................................................91 MISC. TOOLS & ACCESSORIES..........................................................91 SHOVELS ETC.....................................................................................92 PVC GLUE............................................................................................93 PVC PRIMER.......................................................................................93 LANDSCAPE CLOTH & ACCESSORIES...............................................94 SEALERS, TAPES & ACCESSORIES....................................................94
VALVE BOXES....................................................................................... 95 NDS VALVE BOXES.............................................................................95 RAINBIRD VALVE BOXES....................................................................95
ARTIFICIAL TURF.................................................................................. 96 TURF....................................................................................................96 INFILL..................................................................................................97 SEAMS................................................................................................98 NAILS..................................................................................................98 GLUE...................................................................................................98 URICIDE...............................................................................................98
AGRICULTURE...................................................................................... 99
AQUA-TRAXX PREMIUM DRIP TAPE...................................................99 SPIN LOCK FITTINGS..........................................................................99 TRI-POD ASSEMBLIES........................................................................99 BIG GUN NOZZLES.............................................................................100 NELSON BIG GUN...............................................................................100
USEFUL INFORMATION....................................................................... 102 GLOSSARY OF TERMS......................................................................... 103
5
FITTINGS
LEGEND FIPT Female Iron Pipe Thread MIPT Male Iron Pipe Thread SPIG Spigot and Slip-Fit Inside SLIP Fittings Slip Over PVC Pipe RED Reducing Fittings
6
SCH 40 FITTINGS SLIP X SLIP X SLIP
SLIP X SLIP X FIPT
½”
401-005
¾”
401-007
1”
401-010
1¼”
401-012
1½”
401-015
2”
401-020
2½”
401-025
3”
401-030
4”
401-040
¾” x ½”
401-101
1” x ½”
401-130
1” x ¾”
401-131
1-¼” x ½”
401-166
1-¼” x ¾”
401-167
1-¼” x 1”
401-168
1-½” x ½”
401-209
1-½” x ¾”
401-210
1-½” x 1”
401-211
1-½” x 1-¼”
401-212
2” x ½”
401-247
2” x ¾”
½”
FIPT X FIPT X FIPT 402-005
½”
SLIP X SLIP
405-005
½”
406-005 406-007
¾”
402-007
¾”
405-007
¾”
1”
402-010
1”
405-010
1”
406-010
1¼”
402-012
1¼”
405-012
1-¼”
406-012
1½”
402-015
1½”
405-015
1-½”
406-015
405-020
2”
406-020
2”
402-020
2”
¾” x ½”
402-101
2-½”
406-025
1” x ½”
402-130
3”
406-030
1” x ¾”
402-131
4”
406-040
1-¼” x ½”
402-166
¾”x½”
406-101
1-¼” x ¾”
402-167
1” x ½”
406-130
1-¼” x 1”
402-168
1” x ¾”
406-131
1-½” x ½”
402-209
1-½” x ¾”
402-210
1-½” x 1”
402-211
1-½” x 1-¼” 402-212 2” x ½”
402-247
2” x ¾”
402-248
2” x 1”
402-249
2” x 1-¼”
402-250
401-248
2” x 1-½”
402-251
2” x 1”
401-249
2 ½” x 1”
402-289
2” x 1-¼”
401-250
2” x1½”
401-251
SLIP X FIPT
FIPT X FIPT
SPIG X SLIP
MIPT X SLIP
½”
407-005
½”
408-005
½”
409-005
½”
410-005
¾”
407-007
¾”
408-007
¾”
409-007
¾”
410-007
1”
407-010
1”
408-010
1”
409-010
1”
410-010
1¼”
407-012
1¼”
408-012
1¼”
409-012
1¼”
410-012
1½”
407-015
1½”
408-015
1½”
409-015
1½”
410-015
2”
407-020
2”
408-020
2”
409-020
2”
410-020
¾” x ½”
407-101
1” x ½”
407-130
1” x ¾”
407-131
7
MIPT X FIPT
SLIP X SLIP X SLIP
SLIP X SLIP 45°
½”
412-005
½”
413-005
½”
414-005
¾”
412-007
¾”
413-007
¾”x½”
414-101
1”
412-010
1”
413-010
1” x ½”
414-130
1-¼”
412-012
1-½”
413-015
1-½”
412-015
2”
413-020
2”
412-020
¾”x½”
413-101
1” x ½”
413-130
SLIP X SPIG 45°
8
SLIP X SLIP X FIPT
SLIP CROSS
SLIP X SLIP 22½°
½”
417-005
¾”
417-007
1”
417-010
1¼”
417-012
1½”
417-015
2”
417-020
2½”
417-025
3”
417-030
4”
417-040
6”
417-060
SLIP
COUPLING
1”
427-010
1½”
465-015
½”
420-005
½”
429-005
1¼”
427-012
2”
465-020
¾”
420-007
¾”
429-007
1½”
427-015
1”
420-010
1”
429-010
2”
427-020
1¼”
420-012
1¼”
429-012
1½”
420-015
1½”
429-015
2”
420-020
2”
429-020
2½”
429-025
3”
429-030
4”
429-040
FIPT X FIPT
SPIG X MIPT
COUPLING
SLIP X FIPT RED
SLIP X FIPT
COUPLING
COUPLING
½”
430-005
½”
433-005
½”
435-005
¾”
430-007
¾”
433-007
¾”
435-007
1”
430-010
1”
433-010
1”
435-010
1¼”
430-012
1¼”
433-012
1¼”
435-012
1½”
430-015
1½”
433-015
1½”
435-015
¾” x ½”
430-101
2”
433-020
2”
435-020
1” x ½”
430-131
2½”
435-025
1¼” x 1”
430-168
3”
435-030
4”
435-040
SLIP CAP
SLIP X MIPT
½” X ¼” ½” X ¾” ¾” X ½” ¾” X 1” 1” X ½” 1” X ¾” 1” x 1 ¼”
435-072 435-074 435-101 435-102 435-130 435-131 435-132
MIPT X SLIP RED
COUPLING ½”
447-005
½”
436-005
¾”
447-007
¾”
436-007
1”
447-010
1”
436-010
1-¼”
447-012
1¼”
436-012
1-½”
447-015
1½”
436-015
2”
447-020
2”
436-020
2-½”
447-025
2½”
436-025
3”
447-030
3”
436-030
4”
447-040
4”
436-040
½” x ¾” ½” x 1” ¾” x ½” ¾” x 1” 1” x ¾” 1” x 1-¼” 1-¼” x 1” 1-¼” x 1-½” 1-½” x 1-¼” 1-½” x 2”
436-074 436-075 436-101 436-102 436-131 436-132 436-168 436-169 436-212 436-213
9
SPIG X FIPT RED
SPIG X SLIP RED ¾” x ½” 1” x ½” 1” x ¾” 1-¼” x ½” 1-¼” x ¾” 1-¼” x 1” 1-½” x ½” 1-½” x ¾” 1-½” x 1” 1-½” x 1-¼” 2” x ½” 2” x ¾” 2” x 1” 2” x 1-¼” 2” x 1-½” 2-½” x ½” 2-½” x ¾” 2-½” x 1” 2-½” x 1-¼” 2-½” x 1-½” 2-½” x 2” 3” x ½” 3” x ¾” 3” x 1” 3” x 1-½” 3” x 2” 3” X 2 ½” 4” x 2” 4” x 2 ½” 4” x 3”
10
437-101 437-130 437-131 437-166 437-167 437-168 437-209 437-210 437-211 437-212 437-247 437-248 437-249 437-250 437-251 437-287 437-288 437-289 437-290° 437-291 437-292 437-333 437-334 437-335 437-337 437-338 437-339 437-420 437-421 437-422
½” x ½” ½” x ½” ½” x ½” ¾” x ¼” ¾” x ⅜” ¾” x ½” 1” x ½” 1” x ¾” 1-¼” x ½”
SPIG X FIPT RED 438-071 438-072 438-073 438-098 438-099 438-101 438-130 438-131 438-166
FIPT CAP
½”
448-005
¾”
448-007
1”
448-010
1-¼”
448-012
1-½”
448-015
2”
448-020
2-½”
448-025
3”
448-030
4”
448-040
1-¼” x ½” 1-¼” x ¾” 1-¼” x 1” 1-½” x ½” 1-½” x ¾” 1-½” x 1” 1-½” x 1-¼” 2” x ½” 2” x ¾” 2” x 1” 2” x 1-¼” 2” x 1-½” 2-½” x ½” 2-½” x ¾” 2-½” x 1” 2-½” x 1-¼” 2-½” x 1-½” 2-½” x 2” 3” x ½” 3” x ¾” 3” x 1” 3” x 1-½” 3” x 2” 4” x 2”
MIPT X FIPT RED 438-166 438-167 438-168 438-209 438-210 438-211 438-212 438-247 438-248 438-249 438-250 438-251 438-287 438-288 438-289 438-290° 438-291 438-292 438-333 438-334 438-335 438-337 438-338 438-421
½” x ¼”
439-071
½” x ⅛”
439-072
½” x ⅜”
439-073
¾” x ¼”
439-098
¾” x ⅜”
439-099
¾” x ½”
439-101
1” x ½”
439-130
1” x ¾”
439-131
1-¼” x ½”
439-166
1-¼” x ¾”
439-167
1-¼” x 1”
439-168
1-½” x ½”
439-209
1-½” x ¾”
439-210
1-½” x 1”
439-211
1-½”x1-¼”
439-212
2” x 1-½”
439-251
SLIP PLUG
SLIP UNIONS
MIPT PLUG
½”
449-005
¼”
450-002
½”
457-005
¾”
449-007
½”
450-005
¾”
457-007
1”
449-010
¾”
450-007
1”
457-010
1-¼”
449-012
1”
450-010
1-¼”
457-012
1-½”
449-015
1-¼”
450-012
1-½”
457-015
2”
449-020
1-½”
450-015
2”
457-020
2-½”
449-025
2”
450-020
3”
457-030
3”
449-030
2-½”
450-025
4”
449-040
FIPT UNIONS
SNAP TEE
½”
458-005
½”
463-005
¾”
458-007
¾”
463-007
1”
458-010
1”
463-010
1-¼”
458-012
1-¼”
463-012
1-½”
458-015
1-½”
463-015
2”
458-020
2”
463-020
3”
458-030
11
SCH 80 FITTINGS FIPT X FIPT X FIPT TEE
FIPT X FIPT 90° ELBOW
½”
805-005
808-005
-
819-005
830-005
836-005
848-005
¾”
805-007
808-007
-
819-007
830-007
836-007
848-007
1”
805-010
808-010
812-010
819-010
830-010
836-010
848-010
1-¼”
805-012
808-012
812-012
819-012
830-012
836-012
848-012
1-½”
805-015
808-015
812-015
819-015
830-015
836-015
848-015
2”
805-020
808-020
-
819-020
830-020
836-020
848-020
MIPT X FIPT RED
FIPT X FIPT 45° ELBOW
ALL FIPT COUPLING
REDUCING
MIPT X SLIP ADAPTER
TEE SLIP X SLIP
NIPPLE
1-½”
801-015
2”
801-020
¾” x ½”
839-101
¾” x ½”
883-101
1” x ¾”
839-131
1” x ½”
884-130
1-¼” x 1”
839-168
1” x ¾”
884-131
1-½” x 1”
839-211
1-¼” x 1”
885-168
1-½” x 1-¼”
839-212
1-½”
806-015
2” x 1-¼”
839-250
2”
806-020
2” x 1-½”
839-251
UNION Slip X Slip
12
FIPT X MIPT 90° ELBOW
90 DEGREE ELLBOW SLIP X SLIP
BUSHING SLIP X FIPT
UNION FIPT X FIPT
¾”
897-007
¾”
898-007
1”
897-010
1”
898-010
1-¼”
897-012
1-¼”
898-012
1-½”
897-015
1-½”
898-015
2”
897-020
2”
898-020
2” x 1”
838-249
2” x 1 ½”
838-251
FIPT CAP
INSERT FITTINGS INSERT TEE
INSERT X FIPT TEE
INSERT X MIPT TEE
INSERT ELBOW
INSERT X FIPT ELBOW
INSERT X MIPT ELBOW
INSERT CROSS
½”
1401-005
1402-005
1403-005
1406-005
1407-005
1413-005
1420-005
¾”
1401-007
1402-007
1403-007
1406-007
1407-007
1413-007
1420-007
1”
1401-010
1402-010
1403-010
1406-010
1407-010
1413-010
1420-010
1-¼”
1401-012
1402-012
1403-012
1406-012
1407-012
1413-012
1420-012
1-½”
1401-015
1402-015
1403-015
1406-015
1407-015
1413-015
1420-015
2”
1401-020
1402-020
1403-020
1406-020
1407-020
1413-020
1420-020
INSERT x SLIP
INSERT x FIPT
INSERT x MIPT
INSERT COUPLING
INSERT PLUG
½”
1429-005
1432-005
1435-005
1436-005
1449-005
¾”
1429-007
1432-007
1435-007
1436-007
1449-007
1”
1429-010
1432-010
1435-010
1436-010
1449-010
1-¼”
1429-012
1432-012
1435-012
1436-012
1449-012
1-½”
1429-015
1432-015
1435-015
1436-015
1449-015
2”
1429-020
1432-020
1435-020
1436-020
1449-020
INSERT RED. TEE
INSERT x FIPT RED. TEE
INSERT x FIPT RED. ELBOW
For use with... Poly Pipe Blu-Lock Pipe Drip Line
* May require clamps
INSERT x INSERT x FIPT CORFIPT SIDE NER ELBOW OUTLET TEE
INSERT REDUCING COUPLING
INSERT x MIPT RED. ADAPTER
½” x ¾”
1401-074
-
-
-
-
-
1436-074
½” x 1”
-
-
-
-
-
1436-075
¾” x ½”
1401-101
1402-101
1407-101
1414-101
1416-101
1429-101
¾” x 1”
-
-
-
-
-
-
1436-102
1” x ½”
1401-130
1402-130
1407-130
-
-
1429-130
1436-130
1” x ¾”
1401-131
1402-131
1407-131
-
-
1429-131
1436-131
1-¼” x ½”
-
1402-166
-
-
-
-
1-¼” x ¾”
-
-
-
-
-
1429-167
1-¼” x 1”
-
1402-168
-
-
-
1429-168
-
1-½” x ½”
-
1402-209
-
-
-
-
-
1-½” x ¾” 1-½” x 1”
1401-210
1402-210
-
-
-
-
-
1402-211
-
-
-
1429-210 1429-211
1-½” x 1-¼” -
-
-
-
-
1429-212
-
2” x ½”
-
1402-247
-
-
-
-
-
2” x 1-½”
-
-
-
-
-
1429-251
-
1436-101
-
-
13
BLU-LOCK FITTINGS Blu-Lock® 3X takes installation speed and ease to new heights. The addition of three key new features makes push-fit installation easier and more flexible. • Easier—insertion force has been reduced by half to make installation even faster. • Compatible—works with all 80# and 100# SIDR 15 and 19 pipe. • Releasable—all ½”, ¾”, and 1” fittings are releasable and reusable with the Blu-Lock® release tool or “BLR” collar.
TEE
FIPT TEE
ELBOW
FIPT ELBOW
SPIG ELBOW
MIPT ELBOW
COUPLING
½”
B401-005
-
B406-005
B407-005
B409-005
B410-005
B429-005
¾”
B401-007
-
B406-007
-
-
B410-007
B429-007
1”
B401-010
-
B406-010
-
-
-
B429-010
½" x ¾”
B401-074
-
-
B407-074
-
-
-
½” x 1”
B401-075
-
-
-
-
-
-
¾" x ½”
B401-101
B402-101
-
B407-101
-
-
B429-101
¾” x 1”
B401-102
-
-
-
-
-
-
1" x ½"
B401-130
B402-130
-
B407-130
-
-
B429-130
1" x ¾"
B401-131
-
-
-
-
-
B429-131
¾" x 1"
B401-102
-
-
-
-
-
-
FIPT ADAPTER
MIPT ADAPTER
CAP
SOC ADAPTER
INSERT TEE
INSERT COUPLING
Blu-Lock® ½” Fittings · Max working pressure: 80 PSI at 72°F (23°C) · Burst pressure: exceeds 220 PSI ¾” BL fittings: · Max working pressure: 125 PSI · Burst pressure: exceeds 250 PSI · Body material: ABS · Retaining ring Material: Stainless Steel · Seal Material: EPDM
½”
-
B436-005
-
-
-
-
¾”
B435-007
B436-007
B447-007
B474-007
-
-
1”
-
B436-010
B447-010
B474-010
-
--
¾" x ½"
-
B436-101
-
-
B1401-101 -
¾" x 1”
B435-102
-
-
-
-
1" x ½"
-
-
-
-
B1401-130 B1474-130
¾" x 1”
-
B436-131
-
B474-131
-
14
-
PRE-MADE SWING JOINTS SWING JOINT
½" x 6"
BSWJ-060
COMBO FITTING
½” x COMBO
BLJ410-005
½” x ¾” MIPT
BLJ410-101
TOOLS AND MISC. BLU-LOCK REMOVAL TOOL
¾” 1”
BLT-007 BLT-010
15
PVC-LOCK FITTINGS PVC-Lock push-on fittings are built for speed and built for green! Lose the toxic glues and primers, simply push and go. PVC-Lock works in wet and dry conditions, even under water, with instant pressurization. Fittings rotate 360 degrees after installation, for easy alignment. The only IAPMO certified outdoor irrigation push fitting. PVC-Lock push-on fittings are releaseable. MAX WORKING PRESSURE: 150 PSI· BURST PRESSURE: 600 PSI
For PVC Pipe
TEE
FIPT TEE
ELBOW
FIPT ELBOW
COUPLING
½"
PL401-005
PL402-005
PL406-005
PL407-005
PL429-005
-
PL447-005
¾"
PL401-007
-
PL406-007
-
PL429-007
PL436-007
PL447-007
1"
PL401-010
-
PL406-010
-
PL429-010
PL436-010
PL447-010
¾" x ½"
-
PL402-101
-
PL407-101
PL429-101
-
-
¾" x 1"
PL401-102
-
-
-
-
-
-
1" x ½"
-
PL402-130
-
PL407-130
-
-
-
1" x ¾"
-
-
-
-
PL429-131
-
-
REMOVAL TOOL
SLIP FIX
FLEX COUPLING
½"
PLSF-005
PLFPC-005
½"
PLT-005
¾"
PLSF-007
PLFPC-007
¾"
PLT-007
1"
PLSF-010
PLFPC-010
1"
PLT-010
16
MIPT ADAPTER
CAP
PRE-MADE SWING JOINTS Swing Joints allow you to adjust the height of a sprinkler without disturbing the pipe. It also acts like a shock absorber reducing damage to pipe if the sprinkler is stepped on or driven over.
O-RING SWING JOINT
POLY SWING JOINT ½” x 6”
SWJ-005
½” x 12”
SWJ-012
1”
TSJ12
SUPER FUNNY PIPE, SWING JOINT ½” x 8”
SWJ-005-Toro
¾” x 8”
SWJ-007-Toro
Create your own
SWING PIPE FITTINGS
MARLEX FITTINGS MIPT X FIPT ELBOW
FIPT COUPLING
½”
412-006
430-006
¾”
412-008
-
1”
412-011
-
¾” x ½"
412-101
-
1.
½” SWING ELBOW
FEL-005
2. 3. 4. 5.
¾” SWING ELBOW ½” SWING MALE ADAPTER ½” SWING TEE ½” SWING COUPLING
FEL-101 FMA-005 FTEE-005 FCON-005
1.
2.
4.
3.
5.
For Swing Pipe
17
RISERS/NIPPLES
L E N G T H
DIAMETER
1/2” Close 882-005
3/4” 1” 1 1/4” 1 1/2” 2” 883-005 884-005 885-005 886-005 887-005
2”
882-020
883-020 884-020 885-025 -
887-025
3”
882-030
883-030 884-030 -
-
-
4”
882-040
883-040 884-040 -
-
-
6”
882-060
883-060 884-060 885-060 886-060 887-060
8”
882-080
883-080 884-080 -
-
-
10”
882-100
883-100 884-100 -
-
-
12”
882-120
883-120 884-120 885-120 886-120 887-120
18”
882-180
883-180 884-180 885-168 -
-
24”
882-240
883-240 884-240 -
-
-
36”
882-360
883-360 884-360 -
-
-
1/2” Marlex (Black)
434-005
48”
882-480
883-480 884-480 -
-
-
1/2”
434-006
60”
882-600
883-600 884-600 -
-
-
3/4”
434-007
PVC Riser/Extenders
1/2” MNPT 3/4” MNPT x 2 1/2” - X 4” Cut Off Black - Black J04-030 J04-040
1/2” x 6” Cut Off Black J04-060
SHRUB ADAPTER (Toro thread)
570S
SHRUB ADAPTER (standard thread)
HRN-100
Sch40 Riser/ Extender
3/4” MNPT 1/2” X 7 1/2” x 6” - Black MIPT X FIPT - Brown J06-060 M491-005
BRASS NIPPLES DIAMETER L E N G T H
18
1/4”
1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 882-020B 883-020B 884-020B 885-020B 886-020B 886-020B
2”
-
4”
881-040B 882-040B 883-040B 884-040B -
886-040B 887-040B
6”
-
882-060B 883-060B 884-060B -
886-060B 886-060B
12”
-
882-120B 883-120B 884-120B -
886-120B 886-120B
BRASS FITTINGS FIPT X FIPT X FIPT BRASS TEE
FIPT X FIPT BRASS ELBOW
BRASS MIPT x FIPT FIPT X MIPT FIPT X FIPTBRASS STREET BRASS COUP. ELBOW
FIPT BRASS CAP
½"
405-005B
408-005B
412-005B
430-005B
448-005B
¾"
405-007B
408-007B
412-007B
430-007B
448-007B
1"
405-010B
408-010B
412-010B
430-010B
448-010B
1-½"
405-015B
408-015B
412-015B
430-015B
-
2"
405-020B
408-020B
412-020B
430-020B
-
PVC DRAINAGE FITTINGS
⅛” x ¼”
439-041B
½”x ⅛”
439-071B
½”x ¼”
439-072B
½”x ⅜”
439-073B
¾”x ¼”
439-098B
¾”x ½”
439-101B
1” x ¾”
439-131B
1-¼”x 1”
439-168B
1-½” x 1”
439-211B
1-½” x 1-¼”
439-212B
2” x 1-½”
439-251B
TEE
SANITARY TEE
45° WYE
45° ELBOW
90° ELBOW
3”
401-030D
401-030DS
401-030DY
417-030D
406-030D
406-030DL
429-030D
4”
401-040D
401-040DS
401-040DY
417-040D
406-040D
406-040DL
429-040D
90° LONG ELBOW
COUPLING
429-422D
4” x 3” FIPT ADAPTER
3”
435-030D
4”
435-040D
FIPT CLEANOUT
435S-040D
MIPT ADAPTER
SLIP CAP
MIPT PLUG
22-½° ELBOW
DRAIN GATE
436-030D
447-030D
450-030D
465-030D
SWG-030D
-
436-040D
447-040D
450-040D
465-040D
SWG-040D
NDS4PVAF
DOWNSPOUT
RED. BUSHING
2 x 3 x 3”
DSA-233D
FDSA-233D
3 x 2”
437-338D
2 x 3 x 4”
DSA-234D
FDSA-234D
4 x 2”
437-420D
4 x 3”
437-422D
PVC BACKWATER VALVE
4”
BWV4
VARI. ANGLE
PVC TO DRAINAGE ADAPTER BUSHING
3”
437-030PD
4”
437-040PD
19
CHANNEL DRAINS
CHANNEL DRAINS
2’ CHANNEL GRATE
3’ with 2” Spigot Bottom Outlet 4’ 10” Grey Green
NDS253G
Sand
NDS253S
Black
NDS253
Botanical Green
NDS252G
1 2 3 4 5 6 7 7 8 9
NDS400 NDS550 NDS400-10
CHANNEL DRAIN KITS
5”x40”All-in-one kit. Includes channel, grates, screws, end cap
6" Channel Installation Stake End Cap Channel Drain 3" Channel Coupling Channel Coupling 2" Sch 40 SPG End Outlet Surface Drain Inlet 4" Spg 3” Corrugated to 3” drain pipe 4" Corrugated to 4" drain pipe FLO-WELL Tank 24” X 28.75” Basin 2’ Channel Drain, no grate, 4” bottom outlet
NDS230 NDS247 NDS548 NDS248 NDS246 FWSD69 NDS351 NDS451 FWTANK NDS234 7
1
2
3
4
5
6
NDS864
EZ FLOW DRAINAGE EZ FLOW CHANNEL (FRENCH) DRAINS
3” Drain Pipe, 7” Mesh 10’ Length 4” Drain Pipe, 10” Mesh 10’ Length
NDSEZ-0701F NDSEZ-1001F
CORRUGATED END CAP
3"
NDS3C06
NDS3C05
4”
NDS4C06
NDS4C07
The NDS french drain is a prefabricated trench drain that is a gravel free option to a traditional french drain. It cuts installation time in half by eliminating the need to transport, shovel and move heavy gravel. It is made of 3 or 4 slotted corrugated pipe, surrounded by NDS poly-rock, and wrapped in a geotextile fabric.
20
CORRUGATED INTERNAL COUPLING
CATCH BASINS SQUARE ROUND CATCH BASIN CATCH BASIN CATCH BASIN FILTER
POP UP DRAINAGE EMITTER
ROUND GRATE BLACK
ROUND GRATE GREEN
ROUND GRATE GREY
2”
NDS900-2
-
-
-
-
-
-
3"
-
-
-
-
-
-
-
4"
-
-
-
DPOP
BRG4
GRG4
GRG4
6"
-
SPEED101
-
-
BRG6
GRG6
-
9"
NDS900-4
SPEED201
BF9
-
-
-
-
12"
CBS12
-
BF12
-
-
-
-
SQUARE GRATE BLACK
SQUARE GRATE GREEN
ATRIUM GRATE
UNIVERSAL OUTLET PLUG
COMBO OUTLET
4" x 3"
4"
-
-
GAG4
-
6"
-
-
GAG6
UAP6
9"
NDS980
BSG9
GAG9
-
12"
BSG12
GSG12
GAG12
-
UL043
BULKHEADS & RUBBER FITTINGS COUPLING
TEE
ELBOW
FIPT BULKHEAD
½"
-
-
-
PBF005
¾"
-
-
-
PBF007
1"
-
-
-
PBF010
1-¼"
R56-12
-
-
PBF012
1-½"
R56-15
R56-15T
R56-15E
PBF015
1-½” x 1-¼”
R56-1512
-
-
-
2”
R56-22
R56-20T
R56-20E
PBF020
2” x 1-½”
R56-215
-
-
-
3”
R56-33
R56-30T
R56-30E
PBF030
3” x 2”
R56-32
-
-
-
4”
R56-44
-
-
PBF040
4" x 3"
R56-43
-
-
-
6" x 4"
R56-64
-
-
-
6” x 6”
R56-66
Durable PVC construction allows couplings to flex with normal earth movement. They are leak-proof, rootproof, completely unaffected by soil conditions and resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material.
21
TURES AND BENEFITS
Ring Shape and Volume—Allows more torque and mpression to satisfy a wider variety of angles. Over 4X e size of the leading competitor.
HYDRO-RAIN MANIFOLD FITTINGS
ealing Surface—Has twice the surface area at critical
nnections between fittings and manifold.
uttress Threads—Provide exceptionally high axial
MANIFOLD
MANIFOLD CAP
rust so you can crank them hard and they have tremely low friction properties so that you can hand COUPLING hten the fittings fast and effortlessly.
SWIVEL x MIPT
SWIVEL x FIPT
SWIVEL x PVC SLIP
BUTTRESS x MIPT
BUTTRESS x INSERT
HRB 100 1" NPT Commercial Valve with BL 1" B332-010 B335-010 B329-010 Adapter
B08303
B336-010M
B08303-131
B336-007M
gh Deflection Temperature—Withstands pressure
350 PSI and ambient temperature of 120°F.
*Patent Pending
atent Pending Swivel—Eliminates the need for
imer and glue, and serves as the tool for threading the apter into the valve.
MODELS
SkU
ue 1" I.D.1" and Ultra Smooth Core—Maximizes B348-010 B330-010
w and minimizes friction loss.
1" x ¾" hree-Year Warranty—Hydro-Rain ensures full
-
ality performance for the warranty period or we’ll place it.
MANIFOLD
CIFICATIONS
DESCRIPTION
HRB-100-FB-1X
05107
HRJ-100-FB-75
02002
-
HRJ 100 1" Jar Top Valve with BL ¾" Adapter
HRJ-100-FB-1X
02007
HRJ 100 1" Jar Top Valve with BL 1" Adapter
-
INSTALLATION SPECIFICATION
TEE
Next Generation Manifold: · Max working pressure: 250 PSI · Extra large o-ring · True 1” I.D. · Buttress Threads—Provide exceptionally high axial thrust so you can crank them hard.
ax Working Pressure: 200~250 PSI (at 73˚ F)
urst Pressure: Exceeds 350 PSI (at 73˚ F)
mensions:
HRM-100-3P-BD: Length 10" x Width 2.5" HRM-100-2P-BD: Length 6.25" x Width 2.5" HRM-100-2P-BD: Length 3" x WidthB301-010 2.5" 1 PORT
2 PORT
B301-010-2
3 PORT
B301-010-3
-
DURA MANIFOLD FITTINGS SWIV. x SWIV. SLIP x SWIV.. x MIPT TEE x MIPT TEE Larger O-ring for superior sealing surface
SWIVEL x MIPT 90°
SWIVEL x SWIVEL 90°
SWIVEL x SLIP 90°
SWIVEL x MIPT CROSS
SWIVEL x SLIP CROSS
320-010
320-011
(Patent-Pending) Tool Free Design
36 Rev C
HYDRO-RAIN
u
(ph) 888-HYDRORAIN (fx) 801.203.1179
1"
301-010
u
www.hydrorain.com
301-011
SWIVEL x SLIP
SWIVEL x SWIVEL
u
915 Overland Street, North Salt Lake, UT 84054
306-009
306-010
SWIVEL x MIPT ADAPT.
ORING CAP
306-011 SWIVEL x BARB
ORING NIPPLE
1"
329-011
329-010
334-010
348-010
335-010
08303
1" x ½"
-
-
-
-
335-005
-
1" x ¾"
329-007
-
-
-
335-007
08303-131
SWIVEL x ORING
1"
332-010
1-½"
332-015
2"
332-020
22
Manifold System Fittings are O-Ring Sealed 200 PSI RATING
No tools, cutting, gluing or cementing required. The manifold system components contain O-ring seals to prevent leakage at the point of attachment. Assemble hand-tight for a positive seal. The manifold system allows for easy, fast installation and valve repair.
PHILMAC COMPRESSION FITTING 3. Pipe Insertion Insert the pipe into the joint until the first point of resistance is felt.
1. Cut Pipe Square Cut the pipe square using pipe cutters. There is no need to prepare the pipe end. Chamfering or lubrication is not required.
FASTER
Engineered with a unique mechanical turn and lock design, Philmac 3G fittings allow faster, easier installation than brass or metal insert fittings.
4. Nut Tightening The nut should be tightened by hand and then firmly with a wrench. Tighten the nut all the way to the flange on the body of the fitting.
2. Ready to Use Position The fitting is preassembled and ready to use, ensure the nut is fully relaxed and two threads are showing before inserting the pipe.
STRONGER
The dynamic compression sealing provides higher pull-out resistance than brass or metal. Philmac offers strong, reliable service for a 50+ year design life.
5. Fully Installed The fitting is now fully installed.
TEE
FIPT TEE
90° ELBOW
COUPLING
FIPT ADAPTER
MIPT ADAPTER
¾"
P401-007
P402-007
P406-007
P429-007
P435-007
P436-007
1"
P401-010
P402-010
P406-010
P429-010
P435-010
P436-010
1-¼"
P401-012
P402-012
P406-012
P429-012
P435-012
P436-012
1-½"
P401-015
P402-015
P406-015
P429-015
P435-015
P436-015
2"
-
-
P406-020
P429-020
-
P436-020
1" x ¾"
-
P402-131
-
P429-131
-
P436-102
1-¼” x 1”
-
P402-168
-
-
-
-
1
3/4” COMPRESSION x COMPRESSION ELBOW
CP406-007
2
3/4” x 3/4” COMPRESSION x FIPT
CP435-007
3
1” COMPRESSION COUPLING
CP429-010
4
1” COMPRESSION TEE
CP401-010
5
1” x 1” COMPRESSION x FIPT
CP435-010
6
1” x 1” COMPRESSION x MIPT
CP436-010
CEPEX FITTINGS
2
3
4
1
5
6
23
PUSH FIT FITTINGS EASY INSTALLATION Ensure the pipe is cut square and rough edges and debris are removed. Mark pipe for 1” depth. Push pipe and fitting together. • Connects copper, CPVC and PEX pipe in any combination. • No soldering, clamps, unions or glue. • Certified to 200 PSI and 200°F. • Approved for plumbing use behind interior walls without access panels. • Certified for potable water and hydronics. • Easy to disconnect if needed.
SLEEVE REQUIRED WHEN CONNECTING TO PEX PIPE
TEE
ELBOW
FIPT DROPEAR
COUPLING
COUPLING LONG
FIPT ADAPTER
½"
SB401-005
SB406-005
SB407-005
SB429-005
SB429-005L
SB435-005
¾"
SB401-007
SB406-007
-
SB429-007
SB429-007L
SB435-007
1"
SB401-010
SB406-010
-
SB429-010
-
SB435-010
½" x ¾"
-
-
-
-
-
SB435-074
¾" x ½"
-
SB406-101
SB407-101
SB429-101
-
-
1" x ¾"
-
-
-
SB429-131
-
-
MIPT ADAPTER
CAP
BALL VALVE
DISCONNECT TOOL
STIFFENER
½"
SB436-005
SB447-005
SBBV-005
SBKEY-005
SBS-005
¾" 1"
SB436-007
SB447-007
SBBV-007
SBKEY-007
SBS-007
SB436-010
SB447-010
SBBV-010
SBKEY-010
SBS-010
½" x ¾"
SB436-074
-
-
-
-
½” SMART-LOC FITTINGS 1
TEE
SL401-005
2
ELBOW
SL406-005
3
COUPLING
SL429-005
4
MIPT ADAPT.
SL436-005
5
END PLUG
SL447-005
6
HOSE SWIVEL
SL500-005
1
24
2
FITS ALL ½” Polyethylene Tubing 16, 17, and 18mm Removable and Re-usable
3
4
5
6
GARDEN HOSE FITTINGS FHT SWIVEL x BARB
MHT x BARB
MHT x MIPT BRASS
FHT x FIPT
FHT x FIPT SWIVEL
FHT x MIPT
MHT x FIPT
¾"
500-007B
502-007B
503-007B
529-007B
530-007B
534-007B
536-007B
¾" x ½"
500-005B
502-005B
503-005B
529-005B
530-005B
534-005B
536-005B
¾"
MHT x MHT BRASS
FHT X FHT
FHT X FHT SWIVEL
HOSE CAP WITH CHAIN
503-008B
531-007B
532-007B
548-007B
FHT SWIVEL MHT x FHT x INSERT SWIVEL TEE
MHT x INSERT
MALE x QUICK
MHQC-B
FEMALE x QUICK
FHQC-B
MALE x QUICK
BMQC
MHT x MIPT FHT SWIVEL BRASS x FIPT
MHT x SLIP ELBOW
FEMALE x QUICK
BFQC MHT x FIPT MARLEX
¾"
500-007
501-007
502-007
503-007
508-007
510-007
-
¾" x ½"
500-005
-
502-005
503-005
-
510-005
512-101M
¾" x 1"
-
-
502-010
503-010
-
-
-
FHT x MHT ELBOW
FHT x FIPT SWIVEL
FHT SWIVEL x MIPT
FHT x SLIP
MHT x FIPT
¾"
513-007
530-007
534-007
535-007
536-007
548-007
¾" x ½"
513-005 MPT 530-005
534-005
535-005
536-005
-
¾" x 1"
513-008
-
-
-
-
530-008
HOSE BIB NO LEAD
HOSE BIB PLASTIC
HOSE BIB T-HANDLE
FHT CAP
HOSE BIB NON FREEZE
½"
HB-005NL
HB-005P
HB-005T
HB-005FFT
¾"
HB-007NL
-
HB-007T
-
2’ BURY YARD HYDRANT - 1” FPT HYDRANT REPAIR KIT
YH10-02 13YH-PKIT
25
GARDEN HOSE & ACCESSORIES 1
SPRINKLER SPIKE
TSPIKE
2
STEP SPRINKLER SPIKE
SPIKEB
3
WHEELED SLED BASE
SLED-B
4
½"PIPE SLED BASE
PB050
5
SWEEPER NOZZLE
SWEEPER
6
TWIST NOZZLE
NOZ-B
7
XL STREAM NOZZLE
NOZ-xL
8
SHOWER NOZZLE ONLY
WAND-H
9
SPINNING SPRINKLER
54190N
10
METAL SOAKER
27423
11
HOSE PROTECTOR
KINK-007
12
PRO-FLO 33” 7-PATTERN WAND
56365
13
¾" RUBBER WASHER
W75
14
¾" SCREEN WASHER
W75S
15
5/8" x 50’ HOSE
HOSE-STAN-50
16
5/8" x 100’ HOSE
HOSE-STAN- 100
17
D-GRIP ADJUSTABLE NOZZLE
56062N
10
11
17
26
12
1
3
2
4
5
7
8
13
14
6
9
15 16
UNDERHILL GARDEN HOSE Light Duty ProLine Silver 300/100psi
Multi-purpose ProLine GOLD 500/125psi
Heavy Duty UltraMax Red 800/200psi
⅝”, 50’
H58-050LW
H58-050PRO-G -
⅝”, 100’
-
H58-100PRO-G -
¾”, 50’
-
-
H75-050R
¾", 100’
-
-
H75-100R
UNDERHILL HOSE BIB 2 Way Hose Bib 4 Way Hose Bib
A-HB2 A-HB4
UNDERHILL PRESSURE CHECKER Pressure Checker with Spray Head Adapter
A-SHG-160K
UNDERHILL QUICK CONNECT / REPAIR FHT Brass
A-BQ7F
MHT Brass
3/4” Quick Connect for 5/8” and 3/4” connections
A-BQ7M
A-QC075
27
UNDERHILL BRASS Coupling Mender Female Mender w/ Clamp w/ Clamp
Male Mender w/ Clamp
⅝”
HR-58C
HR-58F
HR-58M
¾”
HR-75C
HR-75F
HR-75M
UNDERHILL SPRAY NOZZLE / GUN 1
Sweeper 2” Power Nozzle-3/4” FHT Inlet
SN2-75
2
Super Sweeper 6” Power Nozzle-3/4” FHT Inlet
SN6-75
3
MultiMax Adjustable Nozzle-3/4” FHT Inlet
GNA-75
4
Magnum-Mini Nozzle, 3/4” Hose Thread Inlet
NG350
5
ProSpray Gun; Gold Series; Adjustable Pistol Spray, Thumb Control
NG250-P
6
PatternMasterTM; Gold Series Nozzle, Thumb Control
NG250-8S
7
ProSpray Gun; Gold Series; Adjustable Pistol Spray
NG200-P
8
PatternMasterTM; Gold Series Nozzle, 8 Selectable NG200-8S Spray Patterns
9
Extender Water Wand Spray Nozzle; Telescoping 28-41”
1
2
4
5
7
6
8
NG200-TW
9
28
3
TECHLINE EZ (12MM DRIPLINE) Techline EZ is the only 12mm pressure compensated dripline. Most residential and commercial landscapes do not use the full hydraulic capabillities of a 17mm dripline. At 12mm, Techline EZ provides better value for small and medium plant beds. It’s recycled content makes it eligible for LEED credits.
1
½" MIPT x 12 MM BARB
MA455BR
2
¾" MIPT x 12 MM - Y
Y-455BR
3
INSERT COUPLING
C-455BR
4
INSERT ELBOW
L-455BR
5
INSERT TEE
T-455BR
6
INSERT CROSS
CR455BR
7
12 MM x 17 MM RED. INSERT COUPLING
RC455BR
8
FIGURE EIGHT LINE END
FIG455BR
9
INSERT BALL VALVE
QAV-455BR
4
5
6
• Minimum bending radius: 6” • Maximum pressure: 50 psi, up to 70 psi with clamps • Recommended minimum filtration: 120 mesh
1
3
2
8
7
9
3/8” MICRO FITTINGS 1
3/8" INSERT COUPLING
C455
2
3/8" INSERT ELBOW
L455
3
3/8" INSERT TEE
T455
4
½" MIPT x 3/8" INSERT
MA455
5
½" FIPT x 3/8" INSERT
FA455
6
3/8" INSERT PLUG
EP455
1
4
2
5
3
6
Fittings fit .375 ID and .455 OD tubing
29
DRIP-LOCK FITTINGS 1
1/2” DRIP-LOCK COUPLING
DL-429-005
2
1/2” DRIP-LOCK ELBOW
DL-406-005
3
1/2” DRIP-LOCK TEE
DL-401-005
4
1/2” DRIP-LOCK SHUT-OFF VALVE
DL-VLV-005
5
1/2” DRIP-LOCK CAP
DL-447-005
6
1/2” MIPT X 1/2” DRIP-LOCK ADAPTER
DL-436-005
7
3/4” MIPT X 1/2” DRIP-LOCK ADAPTER
DL-436-101
8
5/8” FHT X 1/2” DRIP-LOCK ADAPTER
DL-MHT-101
9
1/2” DRIP-LOCK X 1/2” STREET X DUAL 1/4” DRIP-LOCK COUPLING DLM-050-DD-STRE
10
1/2” X 1/2” DRIP-LOCK X DUAL 1/4” DRIP-LOCK COUPLING
DLM-050-DD-25
11
1”BL X 1”BL X 1/2” DRIP LOCK TEE
B401-130-DL
12
3/4” BLU-LOCK X 1/2” DRIP-LOCK TEE
B401-101-DL
1
2
8
3
4
5
6
9
10
11
12
7
DRIPLINE FITTINGS 1
TORO PCB DRIPLINE 17MM COUPLING
I560-C
2
TORO PCB DRIPLINE 17MM ELBOW
I560-E
3
TORO PCB DRIPLINE 17MM MALE ADAPTER 1/2”
I560-M50
4
TORO PCB DRIPLINE 17MM MALE ADAPTER 3/4”
I560-M75
5
TORO PCB DRIPLINE 17MM MALE ADAPTER TEE 1/2”
I560-T-M50
6
TORO PCB DRIPLINE 17MM TEE
I560-T
7
XF DRIPLINE 1/2” FEMALE INSERT ELBOW 17MM
XFFFEL
8
XF DRIPLINE 1/2” FEMALE TEE 17MM
XFF-TFA-050
9
XF DRIPLINE 1/2” MALE ADAPTER 17MM
XFFMA050
10
XF DRIPLINE 1/2” MALE TEE 17MM
XFFTMA050
11
XF DRIPLINE 3/4” MALE ADAPTER 17MM
XFFMA075
12
XF DRIPLINE COUPLER 17MM
XFFCOUP
13
XF DRIPLINE ELBOW 17MM
XFFELBOW
14
XF DRIPLINE TEE 17MM
XFFTEE
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DAWN QUICK REPAIR FITTINGS Flo Control’s patented “locking” feature allows the use of the body as a handle to glue both ends of the repair coupling onto the broken pipe. No other repair coupling allows the use of the body to glue both joints.
Pro-Span Expansion Repair Coupling
KwikRepair TEE
KwikRepair COULING
Pro-SpanCOUP.LING
TM
Featuring patented Grip-Lock that locks spigot to body for effective gluing TM
Redundant internal dual-seal for safety
Redundant internal dual-seal for safety
Easy-Grip bars for improved handling with wet hands
½"
KRT401-005
KRC429-005
DF-005
¾"
KRT401-007
KRC429-007
DF-007
1"
KRT401-010
KRC429-010
DF-010
1-¼"
KRT401-012
KRC429-012
DF-012
1-½"
KRT401-015
KRC429-015
DF-015
2"
KRT401-020
KRC429-020
DF-020
2-½"
-
KRC429-025
DF-025
3"
-
KRC429-030
DF-030
4"
-
KRC429-040
DF-040
Featuring patented Grip-Lock that locks spigot to body for effective gluing
True-Cut feature ensures perfect cut to size every time
Positive grip for wet and muddy hands.
PVC COMPRESSION FITTINGS COMPRESSION COUP.
COMP x SLIP TEE
½"
SC29-005
SC01-005
¾"
SC29-007
SC01-007
1"
SC29-010
SC01-010
1-¼"
SC29-012
SC01-012
1-½"
SC29-015
SC01-015
2"
SC29-020
SC01-020
2-½"
SC29-025
-
3"
SC29-030
-
4"
SC29-040
-
Tap into existing lines and connect do different materials such as steel, plastic, copper, or brass. Compression fittings allow repairs without having to use glue. This is especially useful in wet or cold conditions.
31
VALVES BARBED BALL VALVE
BARB x MIPT BV
FPT BRASS BALL VAL.
FPT BRASS GATE VAL.
½"
QAV-005
QAV-005T
BV-005
GV-005
BVWD-005
¾"
QAV-007
-
BV-007
GV-007
BVWD-007
1"
QAV-010
-
BV-010
GV-010
BVWD-010
1-¼"
-
-
BV-012
GV-012
-
1-½"
-
-
BV-015
GV-015
-
2"
-
-
BV-020
GV-020
-
3"
-
-
BV-030
GV-030
-
400 PSI for water, oil or gas (WOG)
200 PSI for water, oil or gas (WOG)
Operating pressure range up to 45 PSI at temperature to 100°F.
BALL VAL. W/DRAIN
MICRO VALVE
Operating pressure range up to 45 PSI at temperature to 100°F.
10/32" THREAD x THREAD
PVFVTT
10/32" x ¼" THREAD x BARB
PVFVTB
¼" x ¼" BARB
PVFVBB
PVC BALL VALVES THR. PVC BALL VAL
32
SLIP PVC BALL VAL
½"
PBV-005T
PBV-005S
¾"
PBV-007T
PBV-007S
1"
PBV-010T
PBV-010S
1-¼"
PBV-012T
PBV-012S
1-½"
PBV-015T
PBV-015S
2"
PBV-020T
PBV-020S
MISCELLANEOUS VALVES 1
BRASS HOSE VALVE
BBV
2
BRASS HOSE VALVE LONG HANDLE
BBVL
3
HOSE VALVE 45 DEG FHTxMHT
BBV-45
4
BRASS HOSE Y
BY
5
BRASS HOSE Y SWIVEL BALL VALVE
BYBV
6
PRO FLOW 4 PORT HOSE MANIFOLD
PFBV-4
7
½” AUTO DRAIN
PYPV-4
8
PLASTIC HOSE Y
KD-005
9
4 WAY BRASS HOSE Y
BYBV-4
10
FHT BLOWOUT CONNECTOR
GPV01
1
2
4
5
6
7
8
9
3
10
QUICK COUPLER WORKS AS A FLUSH MOUNTED WATER SUPPLY OR A BLOWOUT CONNECTOR.
¾" QUICK COUPLER
075-SLSC
¾” QUICK COUPLER KEY
075-SLK
1" QUICK COUPLER
100-SLSC
1" QUICK COUPLER KEY
100-SLK
¾" HOSE SWIVEL
075-75-MHS
1“ HOSE SWIVEL
075-MHS
¾" QUICK COUPLER
3RC
¾" QUICK COUPLER KEY
33DK
1" QUICK COUPLER
44RC
1" QUICK COUPLER KEY
44K
1", 1 PIECE QUICK COUPLER
5RC
1" MIPT TOP THREAD KEY
55K1
CAM-LOCK FITTINGS Type A
Type B
Polypro- CAM-A-010 CAM-B-010 pylene
Type C
Type D
Type E
Type F
CAM-C-010
CAM-D-010
CAM-E-010
CAM-F-010
Type DC
Type DP
CAM-DC-010 CAM-DP-010
33
BACKFLOW PREVENTION A backflow prevention device is used to protect potable water supplies from contamination or pollution due to backflow. In water supply systems, water is normally maintained at a significant pressure to enable water to flow from the tap, shower, or other fixture. Water pressure may fail or be reduced when a water main bursts, pipes freeze, or there is unexpectedly high demand on the water system (for example, when several fire hydrants are opened). Reduced pressure in the pipe may allow contaminated water from the soil, from storage, or from other sources to be drawn up into the system.
REDUCED PRESSURE ASSEMBLY REDUCED PRESS.
½"
RPVA-005W
¾"
RPVA-007W
1"
RPVA-010W
1-½"
RPVA-015W
2"
RPVA-020W
Since RPVA vent regularly, proper drainage is required.
Back flow testing equipment available. Contact us for a quoted price.
VACUUM BREAKER & DUAL CHECK VALVES A HOSE BIB VACUUM BREAKER SHOULD NOT BE UNDER CONSTANT PRESSURE FOR MORE THAN 12 HOURS.
HOSE BIB VACUUM BREAK
ATMOSPHER- DUAL CHECK IC VACUUM VALVE BREAKER
¾"
HBVB
AVB-007
DCA-007W
1"
-
-
DCA-010W
1-½"
-
AVB-015W
-
2"
-
AVB-020W
-
Must be installed 6” higher than the zone it is protecting
34
PVC CHECK VALVES SLIP SWING CHECK
THR. SWING CHECK
SLIP SPRING CHECK
THR. SPRING CHECK
ADJ. CHECK VALVE
½"
SCV-005S
SCV-005T
PCV-005S
PCV-005T
ICV-005
¾"
SCV-007S
SCV-007T
PCV-007S
PCV-007T
ICV-007
1"
SCV-010S
SCV-010T
PCV-010S
PCV-010T
ICV-010
1-¼"
SCV-012S
SCV-012T
PCV-012S
PCV-012T
-
1-½"
SCV-015S
SCV-015T
PCV-015S
PCV-015T
-
2"
SCV-020S
SCV-020T
PCV-020
PCV-020T
Adjust check valve for varying heights.
Hold back 12’ of water.
Designed for low pressure systems like water gardens.
DOUBLE CHECK VALVE ASSEMBLY
DOUBLE CHECK VAL
DOUBLE CHECK VALVE
BLOWOUT FITTING
REPLACEMENT VESSEL
¾"
DCVA-007W
¾"
DCVA-007Z
DCVA-007Z-BOF
DCVA-007Z-VESSEL
1"
DCVA-010W
1"
DCVA-010Z
DCVA-010Z-BOF
DCVA-010-VESSEL
1-½"
DCVA-015W
1-½”
DCVA-015Z
-
-
2"
DCVA-020W
2”
DCVA-020Z
-
-
The EZSwap™ removable pressure vessel provides safe and easy line flushing, quick winterization, and simple maintenance and repair.
35
PRESSURE REDUCERS A pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restrictor and a sensor all in the one body, or consist of a separate pressure sensor, controller and flow valve.
BRASS STATIC PRESSURE REDUCER 25-75 PSI BRASS STATIC REDUCER
25-75 PSI BRASS STATIC REDUCER
¾"
PRV-007W
PRV-007Z
1"
PRV-010W
PRV-010Z
1-½”
PRV-015W
PRV-015Z
2”
PRV-020W
PRV-020Z
36
Larger sizes avaliable by special order.
Maximum 400 PSI inlet pressure
SENNINGER PRESSURE REGULATOR Always install pressure regulators downstream from all shut-off valves. Be sure to install pressure regulators in the proper direction. The arrow on the housing shows the direction of the flow.
¾" GARDENHOSE
¾" FIPT
1" FIPT
¾" ADJUSTABLE
Max. 125 PSI inlet pressure. 10 PSI
PRH10
PRP10-007
PRP10-010
12 - 35 PSI
PR-ADJ-L
15 PSI
PRH15
PRP15-007
PRP15-010
28 - 60 PSI
PR-ADJ-H
20 PSI
PRH20
PRP20-007
PRP20-010
25 PSI
PRH25
PRP25-007
PRP25-010
30 PSI
PRH30
PRP30-007
PRP30-010
35 PSI
PRH35
-
-
40 PSI
PRH40
PRP40-007
PRP40-010
.1 - 7 gpm flow rate. Maximum 100 PSI inlet pressure.
.2 - 20 gpm flow rate. 10 -32 gpm for highflow.
.2 - 22 gpm flow rate. Simple screw adjustment.
50 PSI
¾" FIPT
1” FIPT
PRP50LV-007
PRP50LV-010
37
FILTRATION A water filter clarifies contaminated water using a fine physical barrier, a chemical process, or a biological process. Filters cleanse water to different extents for purposes such as agricultural irrigation, drinking water, public and private aquariums, and the safe use of ponds and swimming pools.
DISK FILTER Disk filters are good at removing both particulates, like sand, and organic matter. A disk filter consists of a stack of round disks. The face of each disk is covered with various sized small bumps. A close up view of the bumps reveals that each has a sharp point on the top of it, somewhat like a tiny pyramid. These bumps are very small, thus a typical disk looks a lot like the old vinyl 45 RPM records! Because of the bumps, the disks have tiny spaces between them when stacked together. The water is forced between the disks, and the particulates are filtered out because they won’t fit through these gaps. The organics are snagged by the sharp points on the bumps. For cleaning of the filter the disks are separated from each other which frees the debris to be flushed out. DISK Y-FILTER
150 MESH DISK CART.
DISK Y-FILTER
80 MESH DISK CARTRIDGE
¾"
TDF150-075
-
DF120-075
DFR07580Y
1"
TDF150-010
-
DF120-010
DFR150080Y
1-½"
TDF150-015
-
DF120S-015
DFR150L080Y
2"
TDF150-020
TDFR020
DF120-020
DFR200080Y
3"
TDF150-030
TDFR030
-
-
BODY REPLACEMENT
COVER REPLACE
O-RING
All filters come standard with 80 mesh screen. State which colour when ordering replacement cartridges.
NUT
WRENCH
¾"
DFBODY075
DFCOVER075 DFORING075
-
-
1"
DFBODY010
DFCOVER010 DFORING020
DFNUTOIO
FWRENCH
1-½"
-
DFCOVER015 -
DFNUTOIO
FWRENCH
38
SCREEN FILTER Screen filters are probably the most common filters and in most cases the least expensive. Screen filters are excellent for removing hard particulates from water, such as sand. They are not so great at removing organic materials such as algae, mold, slime, and other unmentionables! These non-solid materials tend to embed themselves into the screen material where they are very difficult to remove. In other cases they simply slide through the holes in the screen by temporarily deforming their shape.
Y - FILTER PIPE THREAD
Y HOSE THR. T-FILTER
Y FILTER O-RING
155 MESH SCREEN POLYESTER
155 MESH SCREEN STAINLESS STEEL
SCREEN FILTER
INLINE FILTER
½ BARB
-
-
-
-
-
-
PIH6-A
¾"
PFPC64
PFPC64-H
PFP-ORING
903R
903SS
-
-
1-½"
-
-
-
-
-
P75-155L
-
2"
-
-
-
-
-
P80-155
DRINKING WATER FILTRATION 1" -10" BIG BLUE KIT
BB10KIT
1" -20" BIG BLUE KIT
BB20KIT
¾" -10" BLUE HOUSING
CHF-007
1" SPINDOWN INLINE
SPINDOWN-010
1-½" SPINDOWN INLINE
SPINDOWN-015
2" SPINDOWN INLINE
SPINDOWN-020
4-½” X 10”
4-½” X 10”
STANDARD
5 MICRON SPUN POLY
10 MICRON CARBON CARTRIDGE
10" x 2.5"
S-5
C-10
20" x 2.5"
S-5-20
C-10-20
10" x 4.5"
GS-5
GC-10
20" x 4.5"
GS-5-20
GC-10-20
HOW DOES CARBON FILTRATION WORK There are two principal mechanisms by which activated carbon removes contaminants from water; absorption, and catalytic reduction, a process involving the attraction of negatively-charged contaminant ions to the positively-charged activated carbon. Organic compounds are removed by absorption and residual disinfectants such as chlorine and chloramine are removed by catalytic reduction.
CLEANABLE
39
PUMPS 1
FW-EK05
½ HP SHALLOW WELL JET PUMP
1
FW-EK07S
¾ HP SHALLOW WELL JET PUMP
1
FW-EK10S
1 HP SHALLOW WELL JET PUMP
2
SPJ100
1 HP PORTABLE LAWN SPRINKLER PUMP
3
FW-4F11P05005S
½ HP, 11 GPM, 115V, 2W SUB PUMP
3
FW-4F11P05301S
½ HP, 11 GPM, 230V, 3W SUB PUMP
3
FW-4F19P10301S
1 HP, 19 GPM, 230V, 3W SUB PUMP
4
CIS-115
.5 HP, 10 GPM, 115V, 2W CISTERN PUMP
4
CIS-230
5 HP, 10 GPM, 230V, 2W CISTERN PUMP
5
5025PVSP
¼ HP, 30 GPM SUMP PUMP
6
FW-023817
12V TRANSFER UTILITY/PUMP
6
FW-024481
115V TRANSFER UTILITY/PUMP
7
2-07TK-25-2NL
1" x 10" NO LEAD TANK TEE
8
860D-120-10
120V PUMP DOWN SWITCH/ 10’ CORD
8
860U-120-10
120V PUMP UP SWITCH/ 10’ CORD
9
CB-QD-005-230
½ HP, 230V, 4", 3-WIRE CONTROL BOx
9
CB-QD-1-230
1 HP, 230V, 4", 3-WIRE CONTROL BOx
10
PA-100NL
1" BRASS PIT-LESS ADAPTER/ 150PSI MAX
11
PA-125NL
1-¼" BRASS PIT-LESS ADAPTER/ 150PSI MAX
12
PS02-3050
¼" FPT PRESSURE SWITCH 30-50PSI
12
PS02-4060
¼" FPT PRESSURE SWITCH 40-60PSI
40
1
3
2
4
5
6
7
8
9
10
MICRO IRRIGATION 1. 2. 3. 4. 5. 6.
DRIPPER MICRO SPRAYS FOGGER ADAPTER AND BUBBLER STAKES ACCESSORIES
There are several types of micro irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emitter that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integrated drip line or drip tape with the emitters already installed at a predetermined spacing.
DRIP EMITTER DRIPPER
PC DRIPPER
SELF PIERCING DRIPPER
MIDI DRIP STAKE
INLINE DRIPPER
CETA DRIPPER
0.5 GPH
AD-5
NGE02
SPCV05
-
MIL5
-
1 GPH
AD-100
NGE04
SPCV10
9031
MIL10
CETA-100
2 GPH
AD-200
NGE08
SPCV20
-
-
CETAT-100
- sealed to maintain preset discharge rates
- ‘self cleaning’ - closes below 2-3 PSI to prevent draining
- easy to install with the self piercing insert tool
- take apart for easy cleaning
- allows multiple drippers on a single line
- Pressure compensation - self-flushing
24" OUTLET SPIDER
2 OUTLET
DBS2S-24
4 OUTLET
DBS4S-24
The Black Spider addon assembly is ideal for allowing additional distribution to an NGE emitter.
SELF PIERCING INSERT TOOL
SPDT
41
FLAG DRIPPER FLAG DRIPPER
Proven Classic® (non-pressure compensating) hydraulic design. Best dripper for gravity feed systems.
• Barbed inlet allows emitters to be installed directly onto hose or used with 1⁄4” (4mm) leader tubing. • Take-apart feature, allows fast simple field inspection.
1 GPH BLACK
FLAG-100
2 GPH BLUE
FLAG-200
4 GPH GREEN
FLAG-400
MINI BUBBLER ™control with shut-off option Finger-tip flow Vari-Jets
1
BARBED MINI BUBBLER
VJBB
2
1032 THR. MINI BUBBLER
VJBT
3
½"® FIPT x MINI BUBBLER
VJBF
4
MINI BUBBLER ON STAKE
VJBSValve adjusts flow and coverage.
1
3
2
4
Spike model to anchor Mini Bubbler at the plant Designed for localized high flow watering like trees.
Features • Choice of spray patterns. Gentle umbrella • Threaded for installation on Rigidpattern. Risers. Flow andfor coverage • UV stabilized materials long life.can be
altered by rotating cap. is ideal for adjusting overhead Home and landscaped gardens. the Vari-Mist™ Applications
watering of plants in hanging baskets.
VARI-JET AND VARI-MIST SPRayS
- Invert Vari-Mist™ overhead of plants like hanging baskets. - Valve adjusts flow and coverage. - Threaded for installation on Rigid Risers.
VARI JET
Vari-Jet™ 360° x 18 hole 10-32 UNF Thread
90°
PVJ-06Q
180°
PVJ-06H
360°
PVJ-06F
Performance 360° x 18 *Minimum Opening Size BASE & PrESSUrE FLow orIFICE SIzE (psi) (gph)
STANDARD BASE MAX 0.06”
MIST BASE MAX 0.014”
10 15 20 25 30
0 - 16.7 0 - 21.0 0 - 24.5 0 - 28.0 0 - 31.0
10 15 20 25 30
00000-
Mist
180°
90°
0.02” 0.05” DIAmEtEr oF throw (ft)
0.06” 0.06” rADIUS oF throw (ft)
0 - 18.4 0 - 22.6 0 - 25.7 0 - 26.7 0 - 26.3
0 - 6.7 0 - 8.1 0 - 9.5 0 - 10.1 0 - 10.6
0 - 6.4 0 - 8.1 0 - 9.4 0 - 9.8 0 - 10.3
4.0 5.0 5.9 6.6 7.4
0 - 3.0 0 - 2.6 0 - 2.9 0 - 2.8 0 - 2.6
* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from spray to mist.
360° MIST VM-360
42
Vari-Jet™ SPrAy PAttErn
BASE
CAP CoLor
PArt nUmBEr
PACk QUAntIty
PACkS PEr CArton
CArton (lbs)
360° x 18 hole
Black 10-32 UNF
Black
13145
50
50
16.2
• Spike model to anchor Shrubbler ®at the plant. • Spike model to anchor Shrubbler at the plant. • In-Line Spike model suits 0.16” ID connection tube. • In-Line Spike model suits 0.16” ID connection tube. • Barb model for direct attachment to feeder and supply lines. • Barb model for direct attachment to feeder and supply lines. • Threaded model for installation into Rigid Risers and Asta®®Stakes. • Threaded model for installation into Rigid Risers and Asta Stakes. • 1/2” Threaded model for riser pipe installations. • 1/2” Threaded model for riser pipe installations.
can be altered by rotating the cap.
Features
1
• Finger-tip flow control with shut-off option. • Spike model to anchor Shrubbler® at the plant. • In-Line Spike model suits 0.16” ID connection tube. • Barb model for direct attachment to feeder and supply lines. • Threaded model for installation into Rigid Risers and Asta® Stakes. SHRUBBLER 5.3" VJSS-18 • 180° 1/2” Threaded model for riserSTAKE pipe installations.
2
360° SHRUBBLER 5.3" STAKE Applications
3
Pots, tubs, landscaped gardens andSTK nurseries. Ideal for hanging baskets. 360° INLINE SHRUBBLER VJSST-36 In-Line Spike model suitable for planter boxes.
SHRUBBLER
DRIPPERS DRIPPERS
VJSS-36PC
6
180° SHRUBBLER BARB
VJSB-18
7
360° SHRUBBLER BARB
VJSB-36
9
PrESSUrE 10/32’" FLow 360° SHRUBBLER THR.
DIAmEtEr VJST-36
8.7 8.7 10.3 10.3 13.0 13.0
1.2 1.2 1.9 1.9 3.0 3.0
1.2 1.2 1.5 1.5 2.0 2.0
10.3
Feat
••30 30psi psi ••20 20psi psi ••15 15psi psi
8
1.9
®
00
22
Economical fan spray jet for effective watering.
44
66
88
1010
16 16
18 18
6
8
10
12
Number of clicks
14
16
18
Hom
22 22
Economical fan spray jet for effective wate
• Winged base with ‘Quick’ thread for rap
• Choice of three spray ••30 psi 30 psi patterns – 360°, 1 • Four color coded flow rates.
2.0 2.0 Single Piece Jets
Radius (ft) Radius (ft)
Diameter (ft) Diameter (ft)
••3030psipsi
2.02.0
® ® Shrubbler Shrubbler 20Thread 22 10-32 UNF Thread 10-32 UNF
20 20
Features
••20 20psi psi Applications ••15 15psi psi
1.5 1.5
••2020psipsi ••1515psipsi
1.01.0
4
14 14
radius radiusof ofthrow throw•180° 180° No tools required.
Home and landscaped gardens and horticultural applications.
2
1212
Number Numberofofclicks clicks
• Winged base with ‘Quick’ thread for rapid and easy installation. • No tools required. Diameter Diameterofofthrow throw360° 360° • 30spray psi patterns – 360°, 180°, 90°. • Choice of three • Four color coded • 20flow psi rates.3.03.0
• 15 psi
0
App
®
Features
Applications
• W • No • Ch • Fo
Single Piece Jets
6 gph PC Version
44 22
1.5 2.0
Barb 0.16” Barb 0.16”
VJSF-363.0
14 12 10 8 6 4 2
S
Econ
1414
®
Shrubbler Shrubbler® Spike 0.16” Spike 0.16” with adapter with adapter
Flow rate 360° & 180° Discharge (gph)
1515 2020 3030
rADIUS1212 (ft) 1010
(ft)
®
11 22 clicks) 360° SHRUBBLER ½" FIPT 13.0 30
Shrubbler® Barb 0.16”
180° 180° rADIUS rADIUS (ft) (ft)
8 Piece VJSF-181.2Single 1.2 6Jets 6 Shrubbler Shrubbler
10 fully180° SHRUBBLER ½" FIPT 8.7 open 15 20
360° 360° DIAmEtEr DIAmEtEr (ft) (ft)
10/32”
VJST-18360°
(approx.
FLow FLow (gph) (gph)
. & 180° Flow rate THR 360° 180° Flow rate 360° & 180°
180° SHRUBBLER 10/32" THR. (gph)
PrESSUrE PrESSUrE (psi) (psi) fully fullyopen open (approx. (approx. 2222clicks) clicks)
8
(psi)
Performance Performance ¼” BARBED
Discharge (gph) Discharge (gph)
Performance
Pots, Pots,tubs, tubs,landscaped landscapedgardens gardensand andnurseries. nurseries.Ideal Idealfor forhanging hangingbaskets. baskets. In-Line In-LineSpike Spikemodel modelsuitable suitablefor forplanter planterboxes. boxes.
VJSS-36
360° SHRUBBLER STAKE PC
5
Applications Applications
1.0 1.0
Home and landscaped gardens and horticu
0.5 0.5
Economical fan spray jet for effective watering.
0 0 1010 1212 1414 1616 1818 2020 22 22 Features
Number Numberofofclicks clicks
CoLor A orIFICE S
0 0 88 10 16 18 10 12 12 14 14 16 18 20 20 22 22
Blue 0.04”
Number ofoffor clicks Number clicks • Winged base with ‘Quick’ thread rapid and easy installation. • No tools required. • Choice of three spray patterns – 360°, 180°, 90°. • Four color coded flow rates.
Green 0.06”
Single Piece Jets
ac k
en
180°
10 15 20
2.8 3.3 3.8 3.6 4.1
•
1010.8
7.4
50 180˚ Red 1572520 100 50 A n t e l c o i r r i g a t i o n e q u i90˚ p m e n t • URed S A c a t a l o g15715 • 2 0 1 0 • w100 w w . a n t e l c o50 .com Single Single Piece Jets Piece Jets 15 180° 90°
Performance
HOME
UV StABILIzED mAtErIALS 10
acetal
PrESSUrE Jet orIFICE SIzE Single Piece (psi)
CoLor
Single 360˚ Piece Jets 180˚ 360° 90˚
Single Blue PieceBlue Jets 180° Blue
360˚ Green BASE/ConnECtIon tyPE Green 180˚ 360° 20 25 90˚ Green 30 Discharge (gph) Inlet: “QUICK”360˚ THREAD 0.16”Black
FLow 180˚ (gph) 90˚
HOME
SPrAy CoLor PArt A n t e l c o i r r i g a t i o n e q u i p m e n tBlue • U S A c a t a l o g • 2 0 110 0 • w w w . a n t e l c o . c7.5 om PAttErn nUmBEr Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com 0.04” 15 9.5 Single Single Single 360˚ Blue 15445 20 Piece180˚ Jets PieceBlue Jets Piece15425 Jets 11.0 360° 180° 90° 90˚ Blue 15415
360˚ PACk
Black 0.067”
360˚ 180˚ 90˚ 360˚
Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com Single Piece Jets 360°
Single Piece Jets 180°
Single Red Piece Jets 0.075” 90°
HOME 180˚
Red
90˚
10 Red 15 Specifications 20
HOME si)
20
•
Bl ue
HEIGHT WIDTH across wings WEIGHT (approx)
•
360˚ PACk 180˚ QUAntIty 90˚ 100 100 100
Specificat
100 100 DIm 100 HEIGHT WIDTH100 across 100(appr WEIGHT 100
Red PEr 15745 100 PACkS CArton Red CArton A n t e15725 l c(lbs) o i r r i g a t i o100 n eq Red 15715 100 50 7.4 50 7.4 50 7.4
Specifications
100 50 100 DImEnSIonS50 180° 90° 100 50 HEIGHT 0.87” 50 WIDTH100 across wings 0.5” rADIUS 100 50 WEIGHT (approx) 0.021 oz (ft) 50 100
7.4 7.4 UV StABILIzED mA 7.4 7.4 7.4 7.4
3.6
7.4 4.1 7.4 UV StABILIzED mAtErIALS 7.4 4.7
21.7 27.4 31.4
0.87” 0.5” 0.021 oz
acetal
7.4 7.4 7.4
acetal
4.6 5.3 BASE/ConnECtIon tyPE 6.0
Inlet: “QUICK” THREAD 0.16”
4.3 5.0 5.6
5.6 6.3 7.0
5.0 5.6 6.3
6.3 6.9 7.6
15745 100 50 7.4 28.2 10.2 A n t e l 15725 c o i r r i g a t i o n100e q u i p m e n t50• U S A c a t7.4 alog • 2010 • www.antelco.com 15715 100 50 7.4
DImEnSIonS
Flow rate
7.0
15545 100 50 18.8 15525 100DImEnSIonS7.9 50 15515 50 21.8HEIGHT100 8.9 0.87” 15645 100 50 WIDTH across wings 0.5” 19.4WEIGHT100 8.4 15625 50 (approx) 0.021 oz 15615 100 50 24.2 9.3
Black
10 Black 15 Black 20 Red
90˚ 100 100 100
4.6
5.3 SPrAy 6.0 PAttErn 5.6 360˚ 6.3 180˚ 7.0 90˚
Red5.7PEr 15745 50 4.0 7.4 PACkS CArton 2.8100 Red CArtonA n t e l15725 c2.8 o(lbs) i r r i g a t i o 100 n e q u i p m e n50 t • U S A c a 7.4 talog • 2010 • 3.3100 Red6.6 15715 50 4.6 7.4 50 7.4 7.5 3.8 5.3 50 7.4 50 7.4
Specifications 15.0
10 Green 15 Green 20 Green
360˚ 180˚ 90˚
90˚ 100 100 100
360˚ PACk
HOME 180˚ QUAntIty
15545 15525 15515 35
DIAmEtEr 15645 Black 15625 (ft) Black 15615
180˚ HOME QUAntIty
Green 0.06”
PArt nUmBEr
Single 15445 Piece15425 Jets 90° 15415
Black
4.0 4.6 5.3
Single Pie
SPRayS
WIDTH across wings 0.5” WEIGHT (approx) CoLor 0.021AnD oz
15
SPrAy 7.4 PAttErn 7.4
15645 15625 15615
WING-07FBlack
9.0 9.8 10.8
UV StABILIzED mAtErIALS
BASE/ConnECtIon tyPE
acetal
Inlet: “QUICK” THREAD 0.16”
Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com
Re d
0
WING-06F 7.4
Single Piece Jet 7.4
•
WING-05F 15745 100
15545 15525 35 15515
Green 30 Green
WING-07HBlack
Bl ac k
90˚ WING-04F 360˚ Red
WING-06H 7.4
PArt nUmBEr
Single 15445 Piece Jets 15425 90° 15415
WING-07QGreen
5.0 360˚ 6.3 5.6 180˚ 6.9 20 25 6.3 90˚ 7.6 Discharge (gph) 360˚ 180˚ 90˚
15
d
50 50 50
180˚
WING-05H 15645 100
9.8
Re
15625 Flow rate100 15615 100
WING-04H 360˚
WING-06Q 7.4 21.7 9.0
•
50 10 50 15 50 20
ac k
0.075”100 100
WING-05Q Red 100
Bl
15545 15525 15515
•
Green
20.6Green 24.6Black 13.8Black Black 14.4
Re d
7.4 27.4 7.4 0 31.4
50 10 50 15 50 20
90°
21.7 rADIUS 27.4 (ft) 31.40
HOME HOME
•
Single Blue Piece Jets Blue 180° Blue
Black 100 0.067”100 100
(lbs)Green WING-04Q 360˚
Bl ac k
Single 360˚ 5.6 6.3 Piece Jets 180˚ 360° 90˚ 7.0
15445 15425 15415
180˚ 90˚
re en
4.3 5.0 5.6
G
•
8.4 9.3 10.2
Bl ue
CoLor
7.4 19.4 7.4 24.2 15 7.4 28.2
Blue Blue CArton Blue
•
Single Piece Jets 360°
4.6 5.3 SPrAy
en
-
3.6 4.1
en
50 50 50 40
7.0 7.9
20
re
100 100 25 25
360˚ 180˚ 90˚
15.0 CArton 18.8
19.4 24.2 15 28.2
5.0 6.3 360˚ 5.6 6.9 180˚ 20 6.3 7.6 2 90˚ Discharge (gph) 360˚ 180˚ 90˚
15
10 PACkS 15 PEr
QUAntIty CArton (lbs) 20 21.8 8.9 4.7 6.0 PAttErn Home nUmBEr and landscaped gardens and horticultural applications.
WINGED BASE WITH ‘QUICK’ THREADSpecifications DImEnSIonS A n t e l c o i r r i g a t i o n e q FOR u i p m eRAPID n t • U SAND A c a tEASY a l o g • INSTALLATION 2010 • www.antelco.com HEIGHT 0.87”
quipment • USA catalog • 2010 • www.antelco.com
10 15 20
15
•
Green Applications PArt 0.06”PACk
CoLor
G
PACkS PEr CArton
TF318
20
Pressure (psi)
• No tools required.
•
PACk
TF39QUAntIty
* For product specifications see page 1.2
2010 • www.antelco.com
15.0 18.8
21.7 9.0 13.8 CoLor AnD PrESSUrE FLow Red DIAmEtEr 10 rADIUS 0.075” 15 27.4 9.8 (psi) 30 (ft) 90°. (ft) 0 10 •A n 15 35 c a t a l180°, Choice of three patterns – (gph) 360°, 14.4 ri rgorIFICE i ag20 i SIzE o nespray e25 q 0 • • wwwwww. .a31.4 an0nt teel lccoo. .ccoo10 m A n t et lecl oc oi r irDischarge taBlue i to(gph) n q uu i pi p mm e en nt t • • U US SAA7.5 c a t a l o og g • •5.7 220011020 m10.8 10 2.8 4.0 14.3 • Four color coded flow rates. 0.04” 15 9.5 6.6 3.3 4.6 Flow 20 11.0 rate 7.5 3.8 5.3 Single Piece Jet Single Piece Jet
re
1.0 1.0
15
G
31245 31215 31225 31295
24.6 13.87.0 13.8 14.47.9 14.4
Pressure (psi)
Barb 0.16” Thread 10-32 UNF Thread 1/2” FNPT Spike
Bl
50 40 40
50 50 50 40 40
10 15
•
25 25 25
•
PACkS PEr® ®20 Shrubbler Shrubbler
•
PArt nUmBEr
360°
tyPE Barb 0.16” Barb 0.16” Thread 10-32UNF UNF 10-32 31215 100 Economical Thread fan spray jet for effective watering. Thread 1/2”FNPT FNPT 31225 25 Green Thread 1/2” 31225 25 CArton 0.06” Spike 31295 25 Spike 31295 25 ® Shrubbler Shrubbler Thread 1/2” Thread 1/2”
SPrAy PAttErn
90°
Black Performance 0.067” 360° 5.0 6.3 FLow Red CArton DIAmEtEr 5.6 CoLor AnD 6.9PACk PrESSUrEPACkS PEr PArt PArt PACk PACkS PEr CArton 0.075” orIFICE SIzE (psi) (gph) (ft) 6.3 7.6 nUmBEr QUAntIty CArton (lbs) nUmBEr CArton (lbs) Blue QUAntIty 10 7.5 5.7 31245 100 50 9.5 20.66.6 0.04” 15 31245 100 50 20.6 20 11.0 rate 24.67.5 31215 100 50 Flow
9.0 9.8 10.8
20 21.8 QUAntIty In-Line Spike GPH (lbs) Features 20 6 GPH BLACK CArton 11 GREEN GPH GREEN 25 GPH BLACK 30 GPH8.9 RED 4.7 In-Line Spike productspecifications specificationssee seepage page1.2 1.2 Black ** ForFor product 10 19.4 8.4 4.3 0.16” 500.16” 20.6 • Winged base withPerformance ‘Quick’ thread for rapid and easy installation. 0.067” 15 24.2 9.3 5.0 2FT 100 RADIUS 4 FT RADIUS 5 FT RADIUS 6 FT RADIUS 7 FT RADIUS 20 28.2 10.2 5.6 100 50 24.6 360° 180° 90°
Shrubbler® 180° BASE tyPE
21.7 27.4 BASE BASE 31.4 tyPE
ue
31445 31415 31425 31495 30995
180°
10 15 20
®
PACk
5.6 6.3
15.0 18.8 20 21.8
en
Red 0.075”
4.3 5.0
5.6 7.0 Home and landscaped gardens and horticultural applications.
re
Barb 0.16” Thread 10-32 UNF Thread 1/2” FNPT Spike In-Line Spike
19.4 8.4 24.2 9.3 Applications ® ® 10.2 28.2
10 15 20
SPRayS
PArt nUmBEr
Single Piece Jets Shrubbler 180° Shrubbler 180° 2210 15 20
Flow rate
BASE tyPE
10 15 20
20
0.067” Number of clicks
Shrubbler® 360°
Shrubbler® Thread 1/2”
16 Black 18
re
14
G
12
7.5 9.5
11.0 Flow rate
Pressure (psi)
10
FLow Red (gph) 0.075”
•
WING JETS
Green 0.06”
8
ue
0
14.4 14.4 Green 14.3 0.06” 14.3
Bl
0.5
40 40 40 40
d
22
Bl
Number of clicks
20
•
18
G
16
•
14
Pressure (psi)
12
ue
10
• No tools required. Spike 31495 25 15.0 7.0 3.6 4.6 25 Spike 31495 18.8 7.9 spray patterns 4.1 – 360°, 180°, 5.3 25 In-Line Spike 30995 25 • Choice of three 90°. In-Line Spike 30995 21.8 8.9 4.7 6.0 • Four color coded flow rates.
Bl
0
20
•
1.0
®
FLow DIAmEtEr rADIUSQUAntIty tyPE fan nUmBEr QUAntIty tyPE Economical spray jetnUmBEr for effective (gph) (ft) (ft)watering.
• 10 • 15 psi 15
Blue 0.04”
360°
BASE BASE
PrESSUrE (psi)20 psi
Re
Radius (ft)
2.0
Black 0.067”
Performance
180° Home 90° and landscapedPACkS gardens and horticultural applications. PArt adjustment. PACk PACkS PEr CArton PACk PEr with PArt flow Flow and CArton CArton CoLor AnD (lbs) PrESSUrE CArton (lbs) orIFICE SIzE (psi) can be4.0100 altered by5050rotating Barb 0.16” coverage 31445 100 20.6 Barb 31445 20.6 7.50.16” 5.7 2.8 Features Blue 24.6 10 Thread 10-32UNF UNF6.6 31415 100 50 Thread 31415 100 50 24.6 9.5 10-32 3.3 4.6 0.04” 15 • Winged base with ‘Quick’ thread forthe rapid and 11.0 3.8 5.3 25 cap. Thread 1/2”FNPT FNPT7.5 31425 25 easy installation. 50 13.8 Thread 1/2” 31425 50 13.8 20
• 30 psi
CoLor AnD orIFICE SIzE
Pressure (psi)
Shrubbler® hread 10-32 UNF
2.0 diameter • 30 of psi throw 1.5 of over a wide range • 20 psi 1.0 inlet pressures. • 15 psi
3.0
SPRayS
Diameter (ft)
®® Shrubbler 360° original patented Shrubbler® 360° Diameter ofPressure throw 360° radius of throw 180° Performance Shrubbler compensating maintains The Applications
2.8
43
Performance Performance and Specifications and Specifications Performance and Specifications
MINI SPRINKLER
® ROTOR SPRAY™
ROTOR SPRAY MINI SPRAY
Performance
PrESS.
FLow
DIAmEtEr BASE
PrESS. StrEAm FLow
(psi)
(gph)
CoLor (ft) & orIFICE SIzE
(psi) hEIght (gph) (inch)
Brown 0.035”
15 20 25
8.1 9.4 10.5
20 25
9.8 11.7 13.0
15 20 25 30
16.8 19.5 22.0 24.0
Red
15 20 25 30
22.5 26.5 30.0 33.0
23 Red 0.06” 23 27 27
15 20 25 30
21 22.5 23 26.5 27 30.0 28 33.0
Orange 0.07”
15 20 25 30
27.0 31.5 35.5 39.0
Orange 25 0.07” 27 29 29
15 20 25 30
16 27.0 19 31.5 21 35.5 24 39.0
Gray 0.08”
15 20 25 30
32.5 39.0 43.5 48.0
Gray 25 0.08” 27 29 31
15 20 25 30
18 32.5 24 39.0 27 43.5 28 48.0
Black
15
0.06”
25 30
0 - 22.0 0 - 26.0 0 - 30.0 0 - 33.0
Black max 0.06”
15 20 25 ® 30
0.04”
20 GPH
Green Rotor Spray™ 10-32 UNF0.05” Thread
Rotor Spray™ 10-32 UNF Thread
MS-GREEN
• Finger-tip flow control with shut-off option.
26 GPH MS-RED • Spike model to anchor Spectrum™ at the plant.
• Barb model for direct attachment to feeder and supply lines. 0.06” 30 GPH MS-ORANGE • Threaded model for installation into Rigid Risers and Asta® Stakes. • 1/2” Threaded model for riser pipe installations. 40 GPH MS-GREY
Applications
180 Pots, DEFLECTOR MS-DEF tubs, ground cover, landscaped gardens and nurseries. Waters large garden when used with Asta Stakes and risers. BLACK ADJ.areas MINI SPRINKLER MS-VARY ®
™ pectrum 360° Adjustable Flow Vari-Rotor Spray™
max 20 Deflector
can be adjusted to alter flow and coverage. Performance
SPECTRUM (psi)
Features
(gph)
DImEnSIonS ASSEmBLED
(ft)
fully open 15 17.3 • Finger-tip flow control with shut-off option. (approx. 20 19.8 Spike model to anchor Spectrum™24.3 at the plant. 22• clicks) 30
9.4 11.2 13.3
HEIGHT WIDTH WEIGHT (approx)
• Barb model for direct attachment to feeder and supply lines.
UV STABILIZED
FRAME BASE FLIPPER
Threaded model for installation into Rigid Risers and Asta Stakes. MATERIALS Flow •rate ®
• 1/2”360 Threaded model for 5.3" riser pipe installations. SPECTRUM STAKE SPEC-6
2
Applications 360 SPECTRUM ¼" BARB
Discharge (gph)
124
20 16 12 8 4
3
SPEC-250 SPEC-005 18 20
22
TYPE: Inlet Pots, tubs, ground cover, landscaped gardens and nurseries. Waters large 360 10/32 THR. and risers. SPEC-1032 garden areasSPECTRUM when used with Asta® Stakes
40
2
3604 SPECTRUM ½" FIPT 6 8 10 12
Number of clicks
14
Diameter of throw Performance 14 12 10 8 6 4 2 fully open
(approx.
4
15 20 30 8
6
• 30 psi • 20 psi • 15 psi
360°
PrESSUrE (psi)
0 22 clicks) 2
16
FLow (gph)
10
17.3 19.8
12 24.314
Number of clicks
DIAmEtEr (ft) 9.4 11.2
16
18 13.3 20
22
Discharge (gph)
Flow rate Spectrum™ 360˚ 24
20 PArt PACk 16 BASE qNF u i p m e n t •12U tyPE S A c a t a l o g • 2 0 1nUmBEr 0 • w w w . a n tQUAntIty elco.com 8 0.16” Barb 32045 50 4 Thread 10-32 UNF 32015 50 2c0o1m0 • w Thread ww.an t e l FNPT co.com 1/2” 32025 25 0 2 4 6 8 10 Spike 32095 2512
HOME
Number of clicks
PACkS PEr CArton
14
50 50 50 16 40
-
2
14 12
1.0” 0.8” 0.6” 0.06 oz
Diameter (ft)
BArB
10 HEIGHT 8 WIDTH 6 DEPTH 4 WEIGHT (approx) 2
UV STABILIZED 0 2 MATERIAL
1.0” 0.8” 0.6” 0.07 oz
BASE polypropylene acetal 6 8 10 12 14 CAP4 polypropylene polypropylene Number of clicks DEFLECTOR acetal acetal
BASE/CONNECTION TYPE: Inlet
BARB 0.16”
Spectrum™ 360˚
44
thrEAD
10-32 UNF THREAD
32045
50
tAPEr 1.0” 0.8” 0.6” 0.10 oz
HOME
• 30 psi thrEAD 1/2” • 20 psi
1.5” • 15 psi 1.0” 1.0” 0.17 oz
0 - 27 0 - 27
0 - 28
17 17 17 19 21 21 23 23 23 27 27 25 27 29 29
25 39.0 15.1 27 43.5 15.6 29 48.0 16.3 31 0 - 22.017.2 0 - 26.0 0 - 23 0 - 30.0 0 - 23 0 - 33.0 0 - 27
Specifications
0 - 27
17.9 10 11 19.4 13 20.3 11 18.5 12 19.4 13 20.3 14 19.1 16 20.0 21 20.9 24 21.8 21 20.4 23 20.8 27 22.2 28 24.0 16 21.2 19 23.0 21 23.9 24 24.4 18 21.2 24 23.0 27 23.9 28 24.4 0 - 21 0 - 23 0 - 27 0 - 28
5.3” 1.7” 0.6” 0.19 oz
polypropylene 20 22 polypropylene acetal
polypropylene polypropylene acetal
TAPER # 6 (Refer Page 4.0)
THREAD 1/2” FNPT
BARB 0.16”
13.8
13.2 13.8 13.8
17.9 19.4 20.3
13.9 14.8 15.7
18.5 19.4 20.3
13.9 14.8 15.7 16.6
19.1 20.0 20.9 21.8
14.5 15.4 16.0 16.5
20.4 20.8 22.2 24.0
15.1 15.6 16.3 17.2
21.2 23.0 23.9 24.4
15.1 15.6 16.3 17.2 0 - 23 0 - 23 0 - 27 0 - 27
21.2 23.0 23.9 24.4 0 - 21 0 - 23 0 - 27 0 - 28
-
3
4
Finger-tip flow control with shut-off option. Antelco irrigation equipment • USA catalog • 2010 • www.antelco.co
SPIkE
acetal 16 18 polypropylene acetal
50
20 18 25 24 30 27 28 15 0 -20 21 0 -25 23 30 0 - 27
15 17 17
13.8 15.7 HOME A n t e l c o15.6 i r r i g a t i o n e qAuni tpeml ce on ti r•r i U g aS tAi ocna teaql u o igp m • e2n0t 1 •0 U • Sw A wcwa .t aa nl ot eg l c• o 2 . c0o1m0 • w w w . a n t e l c o . c o m 18 2015.3 22
BASE PArt PACk PACkS PEr CArton l c o i r r i g a t i otyPE n e q u i p m e n t •nUmBEr U S A c a t a l oQUAntIty g • 2010 • w w w . a n t e l c o . c(lbs) om CArton NF Barb 0.16”
25 0.08” 27 29 31 Black 0 - 23 max 0 - 23 0.06”
8.1 13.2 9.4 13.8 10.5 13.8 9.8 13.9 11.7 14.8 13.0 15.7 16.8 19.5 13.9 22.0 14.8 24.0 15.7 16.6 22.5 26.5 14.5 30.0 15.4 33.0 16.0 16.5 27.0 31.5 15.1 35.5 15.6 39.0 16.3 32.5 17.2
BASE/CONNECTION 10-32 UNF TAPER # 6 10-32 UNF HDPE HDPE HDPE HDPE TYPE: Inlet THREAD 0.16” (Refer Page 4.0) THREAD 0.16 TAPER # 10-32 6 UNF 10-32 UNFTAPER # 6 TAPER # 610-32 UNF TAPER # 6 (Refer Page THREAD 4.0) 0.16” THREAD 0.16” (Refer Page (Refer 4.0) Page THREAD 4.0) 0.16” (Refer Page 4.0)
KNOB
BASE/CONNECTION 10-32 UNF TYPE: THREAD Inlet0.16”
Specifications Diameter of throw DImEnSIonS ASSEmBLED
15 10 20 11 25 13 15 11 20 12 25 13 15 14 20 16 25 21 30 24 15 21 20 23 25 27 30 28 15 16 20 19 25 21 30 24 15
DImEnSIonS rotor SPrAy™ rotor SPrAy™ VArI-rotor ASSEmBLED and InVErtED and InVErtED SPrAy™ rotorDImEnSIonS SPrAy™ rotor SPrAy™ rotor SPrAy™ VArI-rotor rotor SPrAy™ VArI-rotor VArI-rotor VArI-rotor rotor SPrAy™ rotor SPrAy™ and InVErtED ASSEmBLED and InVErtED and InVErtEDSPrAy™ and InVErtEDSPrAy™ SPrAy™ SPrAy™ HEIGHT 1.4” 1.4” 1.8” rotor SPrAy™ rotor SPrAy™ rotor SPrAy™ rotor SPrAy™ WIDTH 1.1” 1.1” 1.1” HEIGHT 1.4” 1.4” WEIGHT 1.4” (approx) 1.8” 1.4” 1.8”oz 1.8” 0.07 0.08 oz 1.8” 0.12 oz WIDTH1.1” 1.1” 1.1” 1.1” 1.1” 1.1” 1.1” 1.1” UV STABILIZED FRAME acetal acetal acetal WEIGHT 0.07 (approx) oz 0.08 oz 0.07 oz 0.12 oz 0.08 oz 0.13 oz 0.12 oz 0.13 oz MATERIALS BASE acetal acetal acetal UV STABILIZED acetal FRAME acetal acetal acetal acetal acetal acetal acetal FLIPPER nylon nylon nylon MATERIALS acetal BASE acetal acetal acetal acetal acetal acetal acetal KNOB HDPE nylon FLIPPER nylon nylon nylon nylon nylon nylon nylon
• 30 psi • 20 psi
CArton • 15 psi (lbs)
15Brown 0.035” 17 17 Blue 17 0.04” 17 17 Green 19 0.05” 21 21 23 Red 23 0.06” 23 27 27 Orange 25 0.07” 27 29 29 Gray
DIAmEtEr DIAmEtEr StrEAm DIAmEtEr hEIght (ft) (ft) (ft) (inch)
Specifications
SPRayS
Diameter (ft)
1
• 30 psi KNOB • 20 psi BASE/CONNECTION • 15 psi
0.65 ft Tested 2.6 ftTested Tested 6.6 ft above ground above ground above ground
BASE PrESS. DIAmEtEr StrEAm DIAmEtEr DIAmEtEr StrEAm StrEAm FLow DIAmEtEr DIAmEtEr DIAmEtEr StrEAm CoLor & hEIght (psi) (gph) (ft)(ft) (ft) (ft) (ft) hEIght hEIght (ft) hEIght orIFICE SIzE (inch) (inch) (inch) (inch)
10-32 UNF Thread 0.05” 21 20 16 19.5 21 25 21 22.0 23 30 24 24.0
0 - 22.0 0 - 26.0 0 - 30.0 0 - 33.0
Tested 2.6Tested ft Tested Tested 0.650.65 ft6.6ftft ground above ground aboveabove above ground ground
SPRayS
An adjustable flow, full circle vortex sprayer with Flow 360°fine water droplets. Specifications and coverage can be altered by rotating PrESSUrE FLowthe cap. DIAmEtEr
Durable and Brown 15 15 10 8.1 reliable with 0.035” 17 20 11 9.4 ® 17 25 13 10.5 excellent Blue 17 15 11 9.8 distribution 0.04” 17 20 12 11.7 17 25 13 13.0 Rotor Spray™ uniformity Green 19 15 14 16.8
VARI-ROTOR SPRAY™ INVERTED ROTOR SPRAY™
SPRINklERS
BASE
9 GPH MS-BROWN An adjustable flow, full circle vortex sprayer with fine water droplets.Blue Flow 15 and coverage can be altered by rotating the cap. 11 GPH MS-BLUE
Tested Tested 0.65 0.65 ft ft above above ground ground
CoLor & orIFICE SIzE
ROTOR SPRAY™ VARI-ROTOR INVERTED ROTOR SPRAY™
Performance
Performance Tested 0.65 ft above ground
pectrum™ 360° Adjustable Flow
Features
VARI-ROTOR ROTOR SPRAY™ SPRAY™
2.0
3.1
ROTOR MAX
Robust and reliable “spinner” sprinkler for use above and below plant foliage and with two trajectory options. Excellent sprinkler distribution patterns and performance.
Features
• Dual outlet spinner enhances performance. 30'colored spinner. • Standard model has30' a 25° trajectory, black Greenhouses, vegetable row crops and under • Inverted modelDIAMETER has a 0° flat trajectory, khaki colored spinner. DIAMETER tree watering. Inverted Rotor Max™ is ideal for • Suitable for recycled water applications subject to adequate filtration. • Easily taken apart for servicing. over-head watering in greenhouse, nursery and Mini-compact model 52-866-xx is a highly efficient micro • UV stabilized materials for long life. shadeinhouse applications. The 0° trajectory sprinkler without a bridge, designed to irrigate an Applications inverted position for greenhouses. It cansprinkler be connected is also suited to standard upright Greenhouses, vegetable row crops and under tree watering. Inverted Rotor is with or without an antileak device directly to a Max™ lateral vine operation, excellent for under foliage or wind ideal for over-head watering in glasshouse, nursery and shade house applications. to prevent drippingThe at the beginning or at the end of each affected locations. 0° trajectory sprinkler is also suited to standard upright operation, excellent for under irrigation cycle, keeping the entire line pressurized. 90 GPH RM-RED foliage or wind affected locations. RM-RED-INV
TITLE MINI-COMPACT MICRO SPRINKLER SERIES 866
120 GPH
RM-BLACK
-
nozzLE CoLor
PrESSUrE (psi) 15 20 30 40 15 20 30 40 15 20 30 40
Red 0.11” Black 0.13”
FLow (gpm) 1.3 1.5 1.8 2.1 1.7 2.0 2.4 2.8 2.4 2.8 3.7 4.2
• Suits all applications in irrigation and propagation Inverted Rotor Max™ • Use in greenhouses and nurseries tested 6.6 ft above ground
DIAmEtEr StrEAm hEIght FEATURES (ft) (ft) • Excellent performance with uniform water distribution 36.0 3.0 even at low pressure 39.0 • Trouble free operation 3.5 43.0 • Color coded specially 4.0 designed nozzle with backup filter 43.0 • Firm compact 4.5 construction without a bridge gives a complete 36.0 360° circle 3.0 39.0 3.5 allows for wide range of interchangeable 43.0 • Modular design4.0 45.0 components 4.2 40.0 • Nozzle has a small 2.3 backup filter for protection against 42.0 penetration of 2.7 dirt 46.0 3.4 45.0 • Made of durable 3.9materials ensuring resistance to most
MINI COMPACT Purple 0.15”
•
le rp Pu
•
ac k
MINI-COMPACT MICRO SPRINKLER
Bl
d Re
•
9 GPH - 18 ft. - BLUE +PZJOHYNL NWT 52-866-09 10 GPH - 20 ft. - OLIVE
rotor max™ 1/2”
CoLor orIFICE SIzE QUAntIty 15 GPH - 23 ft. - GREYnUmBEr 52-866-15 Red 0.11” 21055 20
BENEFITS • Excellent performance with uniformal water
MODEL
DESCRIPTION
Micro sprinkler on 1/2” FNPT b Micro sprinkler assembly with 1 tubing, antileak device, .270 OD 52-866-xx-24 Patented Micro sprinkler assembly with 2 antileak device, .270 OD barb a 52-866-xx-36 Micro sprinkler assembly with 3 backup filter. PERFORMANCE AND TECHNICAL DATA antileak device, .270 OD barb a Firm polyacetal compact construction without a bridge 52-530-05 •• Material: Antileak device (low pressure) • gives Flow rates: 9 - 42 GPH (35 - 160 L/H) device (high pressure) a complete 360° circle. The C-Frame Downspray is 52-530-10 a 360° sprayAntileak jet that distributes wa • Diameter of coverage: 15’ - 29’ (4.5 - 8.7 m) 50-255-xx Micro tubing assembly with wei the wetted surface area. Stake assembly options provid 50-822-0 1/2” FNPT base • Operating pressure: 15 - 35 PSI (1 across - 2.4 BAR) • distribution. Allows a large number of micro sprinklers to operate at the same time due to lower flow rate ® at ratio • Trouble free operation lowofpressure. • Uniform growth of root system due even to optimal in thecoded soil •water Color specially designed nozzle with
52-866-xx-0 52-866-xx-12
CFd Downspray
labor and installation time.
52-866-10
13 GPH - 22 ft. - VIOLETPArt 52-866-13 nozzLE PACk
• Operating pressure in overlapping irrigation: 25 - 30 PSI (1.7 - 2.0 BAR) • Pattern: 360° • Trajectory angle: approximately –5° • Droplet size: medium • Filter requirement: 120 mesh (130 micron) u to 24 GPH, 24 - 42 GPH 80 mesh (180 micro
chemicals and fertilizers for long-lived trouble free operation
* Stream height is applicable only to the Rotor Max™
Flow rate
MODELSDes 52
APPLICATIONS
Rotor Max™ tested 0.65 ft above ground
Performance
7YLZZ\YL WZP
Thread
rotor max™ midi Sprinklers
PACkS PEr CArton 10 10 10
Model Nozzle Color
CArton (lbs)
FLOW RATE AND DIAMETER Features 52-866-09 52-866-10 52-866-13 52-866-15 52-866-18 52-866-24 52-866-32 52-866-42 Lt. Blue Silver Blue Violetdownspray Gray Black Green Red • 45° reduces the effect ofBrown wind.
• Gentle spray minimizes damage to delicate plant foliage.
Nozzle size (inch) .031 .035 .039 .043 .047 .051 .059 .071 14.1 • Galvanized wire stake assembly with 36” tubing. NOMINAL Black 0.13” 21005 20 14.1 FLOW RATE AT 29.4 PSI (2 BAR) 18 GPH - 250.15” ft. - GREY 21065 52-866-18 Purple 20 14.1(GPH) Flow rates 9 10 • Three 13 color 15 coded 18 frames 24 to identify 32 42 flow rates. Wetting diameter (feet) 18 20 22 23 25 29 33 24 GPH - 28 ft. - GREEN 52-866-24 • “Quick” thread for easy28 insertion into tubing. PERFORMANCE AT 6’ (1.8M) HEIGHT • Shut-Off Clip to stop flow. PERFORMANCE AT 20 PSI (1.4 BAR) Inverted 32 GPHrotor - 29 ft.max™ - RED1/2” 52-866-32 /2” Thread Flow rates (GPH) 7.8 8.9 • UV11.0 13.1 for15.5 20.0 26.6 35.5 stabilized long life. nozzLE PArt PACk PACkS PEr CArton 42 GPH - 33 ft. - BROWN 52-866-42 Wetting diameter (feet) 15 17 18 20 21 22 23 25 CoLor orIFICE SIzE nUmBEr QUAntIty CArton (lbs) Applications PERFORMANCE AT 25 PSI (1.7 BAR) Red 0.11” 21555 20 10 14.1 Flow rates 8.6 9.9 Nurseries, 12.4 14.9 lots, 17.4potted 22.3 plants, 29.7 home 39.7 and landscaped garde Black 0.13” 21505 20 10 14.1(GPH) tree Purple 0.15” 21565 20 10 14.1 Wetting diameter (feet) 17 18 19 21 23 23 24 26 Rectangular Spacing (feet) 8 x 10 8 x 10 10 x 10 12 x 12 12 x 12 12 x 12 12 x 16 12 x 16 Application rate (in/hr) 0.17 0.19 0.19 0.17 0.19 0.24 0.24 0.33 PERFORMANCE AT 30 PSI (2.1 BAR) Specifications Flow ratesjet (GPH)that distributes 9.5 10.9 13.6 19.0 the 24.4 43.4 area. The C-Frame Downspray is a 360° BASE/ConnECtIon spray water evenly16.3across wetted32.6surface Performance DImEnSIonS ASSEmBLED UV StABILIzED mAtErIAL Wetting diameter (feet) tyPE 18 19 21 22 24 25 26 28 360° HEIGHT 3.8” FRAME polypropylene Inlet: THREAD 1/2”(feet) BSPM 10 x 12 Rectangular Spacing 12 x 12 12 x 12 13 x 15 15 x 15 15 x 15 16 x 16 16 x 18 dently tested WIDTH 3.5” SPINNER acetal nology Centre, CoLor AnD FLow 0.36 DIAmEtEr Application rate (in/hr) 0.19 0.21 0.21 0.18 PrESSUrE 0.21 0.27 0.17 DOWN WEIGHT (approx) 0.95SPRAYS oz NOZZLE acetal . (psi) (gph) (in) PERFORMANCE AT 35 PSI (2.4 BAR) orIFICE SIzE Flow rates (GPH) 10.3 11.7 Black 14.7 17.6 20.5 26.4 35.2 46.9 10 4.8 24 ® CFd® CFd CFd® Wetting diameter (feet) 18 200.032”22 23 24 26 286.0 29 15 24 Downspray Downspray Downspray Rectangular Spacing (feet) 10 x 12 12 x 12 12 x 12 13 x 15 15 15 x 15 16 x7.2 16 16 x 18 20x 15 20 HOME A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 0 • Black w w w . a n t e l cBrown o .Application c o m rate (in/hr) Blue 0.20 0.23 0.23 0.20 0.22 0.29 0.29 0.39
DOWN SPRAY
5
6 GPH
CFD-6
8 GPH
CFD-8
10 GPH
CFD-10
Brown 0.035”
10 15 20
6.0 7.5 8.6
24 20 20
Blue 0.039”
10 15 20
7.0 8.9 10.5
24 20 20
PArt nUmBEr
PACk QUAntIty
CFd® Downspray CoLor
orIFICE SIzE
45
PACkS CArt
micro Spray Jets: Caps and Bases
S
18 hole
®
15 hole
12 hole
10 hole
180˚ fan 90˚ fan Strip (2 x 20˚)
Black Black Black
100 100 100
50 50 50
3.6 3.6 3.6
TEST & Flow rates micro Spray Jets: Performance
MICRO SPRAY JETS 270° (3 x 90°)
180° fan
Hexagon JET Jet MICRO Base 10-32 UNF Thread BASE
Jet Bases
BASE
PArt
PACk
PACkS PEr
10925 10915 10935 10955 10975 10945 10985
100 100 100 100 100 100 100
50 50 50 50 50 50 50
CArton (lbs)
A large combination rates spray patterns the CoLorof flow orIFICE SIzE and tyPE nUmBEris achievable QUAntIty when CArton 90° Black bases are0.03” Hexagon 10905 jets. 100 50 rangeStrip of caps and assembled into two piece
Brown 0.035” Hexagon Blue 0.04” Hexagon Green 0.05” Hexagon Red 0.06” Hexagon Winged Jet available in eight spray patterns. • Caps Orange 0.07” Hexagon Base with Gray 0.08” Hexagon • Eight “Quick” Threadcolor coded bases to identify flow rate. White 0.09” Hexagon fan
®
(2 x 20°)
Features
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6
micro Spray Jets: Caps and Bases
Performance
• Jet assemblies made to order. Black 0.03”360˚ X 18Winged 10705 MIST 360˚ X 15 360˚ X 12 300˚ X100 10 270˚ X 3 50 2 X 20˚ 6.5 90˚ 180˚ Brown 0.035” Winged 10725 100 50 6.5 • Caps and bases can be ordered separately. Blue 0.04” Winged 10715 100 50 6.5 0.05” *Minimum opening size 0.02” 0.03” 0.03” 0.05” 0.05” 0.06” 0.06” 0.02” Green 0.05” Winged 10735 100 50 6.5 • Available in 10-32 Hex and Winged thread. A large“Quick” combination of flow rates and spray patterns is achievable when the BASE
Red PrESS.
0.06” Winged 10755 50 6.5 FLow DIAmEtEr 100 rADIUS (gph) (ft) are assembled into two piece jets. (ft) range of caps and bases
CoLor & (psi) Applications orIFICE SIzE
DIAmEtEr (ft)
Assemblies suit garden bed 0.03” 10 4.7watering 10.2 and landscaped 9.2 9.5 areas.5.9 Features
0.07”
10.9 10.4 4.4 4.4 Black 15 5.9 13.4 10.6 10.7 11.0 11.4 14.1 5.7 5.0 • Caps available in eight spray patterns. Specifications 0.03” 20 6.9 14.7 11.5 12.5 14.8 9.2 16.8 6.6 5.4 25 DImEnSIonS 7.8 12.4 coded 13.7BASE 17.5 9.2 flow 18.9 7.2 5.6 •15.6 Eight color bases to identify rate. CAP wIngED BASE hEXAgon 7.5 GPH BROWN PB-05 30 8.6 16.4 14.0 15.5 20.0 8.8 19.9 7.7 6.7 HEIGHT 0.35” 0.8” 0.8” • Jet assemblies made to order. 10 6.1 10.8 10.2 9.7 8.5 across11.5 4.7 4.8 WIDTH 0.32” across wings9.7 0.5” flats 0.5” 9 GPH BLUE PB-04 •13.3 Caps and can be 13.4 ordered separately. 0.007 oz 0.02 oz 11.2 Brown WEIGHT 15 (approx) 7.5 12.6bases 11.3 15.5 0.02 oz 6.1 5.3 TEST 0.035” 20 8.6 15.1 14.1 13.1 16.4 10.8 18.7 7.6 5.7 UV STABILIZED MATERIALS acetal acetal acetal 14.5 GPH GREEN PB-06 • Available in 10-32 Hex and Winged “Quick” thread. Spray Caps 25 9.6 16.9 15.0 15.0 19.5 9.8 10-3221.4 8.2 5.9 BASE/CONNECTION TYPE: Inlet “QUICK” THREAD 0.16” UNF THREAD 30 10.5 18.6 16.8 17.6 22.0 9.4 22.5 8.6 6.3 20 GPH RED PB-08 Applications SPrAy CAP10 PACkS CArton 7.0 PArt13.4 10.5PACk 11.2 10.9 PEr12.5 11.5 5.2 5.2 Assemblies suit garden watering PAttErn QUAntIty CArton (lbs) 25 GPH ORANGE PB-09 Blue CoLor 25 8.9nUmBEr 15.8 12.6 14.6 bed 16.3 13.3and landscaped 15.9 6.7areas. 6.0 0.04” 20 10.5 18.2 14.8 16.4 21.4 10.6 17.7 7.7 6.4 360˚ x 18 hole Black 10845 100 50 3.6 25 12.0 19.6 17.5 17.6 25.3 11.1 19.0 8.5 6.6 31 GPH GREY PB-07 360˚ x 15 hole Black30 10855 100 50 3.6 13.3 20.4 20.9 23.0 28.6 10.6 19.0 9.2 7.0 360˚ x 12 hole Black 10865 100 50 3.6 44 GPH WHITE PB-10 11.5 10875 17.4 15.8100 13.0 12.850 11.0 15.5 5.8 5.7 300˚ x 10 hole Black10 3.6 Green Black15 14.5 10835 21.1 19.1100 16.7 18.850 11.5 19.3 7.4 6.6 270˚ (3 x 90˚) 3.6 360° 360° 360° 300° 0.05” 20 17.2 22.5 20.0 19.1 22.5 12.0 22.4 8.4 7.2 180˚ fan 3.6 18 hole 15 hole 12JET hole CAP 10 hole 25 19.5 10825 23.3 22.1100 20.3 25.450 12.1 25.4 9.1 7.8 TESTBlack MICRO 90˚ fan Black30 10815 3.6 Spray Caps 26.1100 23.5 21.5 23.8 26.450 12.3 28.3 9.6 8.4 Strip (2 x 20˚) Black 10885 100 50 3.6 10 16.3 18.4 15.9 15.6 16.4 11.1 17.8 6.4 6.7 PACk Red 15 20.0 SPrAy 22.6 20.1 CAP20.9 18.1PArt 12.6 21.9 8.1 PACkS 8.1 PEr nUmBEr14.0 QUAntIty CArton 0.06” 20 23.5 PAttErn 25.7 23.6 CoLor 26.0 24.8 27.5 9.4 9.5 25 26.0 26.7 27.2 30.5 32.4 15.0 31.8 9.8 10.1 Jet Bases hole 100 50 HOME A n t e l c o i r r i g a t i30 o n e q u 29.0 i p 360˚ m e n xt 18 •26.3 U S A c a t 29.4 a l o g Black • 2 033.5 1 0 • w w34.5 w . a10845 n t e l c15.8 o.com 35.8 10.8 10.6 2.5 360˚ x 15 hole Black 10855 100 50 10 20.0 18.5 18.6 20.1 18.3 12.8 19.6 6.6 6.8 BASE PArt PACk PACkS PEr CArton 360˚ x 12 hole Black 10865 100 50 Orange SIzE15 25.0 22.5nUmBEr 22.9 25.4 24.7 CArton 13.9 26.9 8.0 8.0 CoLor orIFICE tyPE QUAntIty (lbs) 300˚ x 10 hole 100 50 0.07” 20 29.0 25.6 27.6 Black29.6 28.210875 14.8 26.9 9.0 8.7 270° 180° 90° Strip Black 0.03” Hexagon 10905 100 50 5.6 270˚ (3 x 90˚) Black 10835 100 50 360° 360° 360° 300° 25 33.0 26.5 30.6 32.6 30.6 15.7 32.9 9.8 9.7 Brown15 hole 12 hole 0.035”10 hole Hexagon 10925 100 50 5.6 180˚ fan Black 10825 100 50 (3 x 90°) fan fan (2 x 20°) 18 hole 30 36.5 25.0 33.7 35.8 33.2 10.3 36.1 10.3 10.3 2 x 20 ft. PCF-040 Blue 0.04” Hexagon 10915 50 5.6 90˚ fan Black 100 10815 100 50 10 25.0 20.1 19.2 Black20.9 17.610885 22.2 6.8 6.8 0.05” Hexagon 100 5013.6 5.6 Strip (2 x 20˚) 10935 100 50 90° PCF-090 Green Gray 15 31.0 24.6 25.4 27.3 24.7 15.2 31.6 8.7 8.3 Red 0.06” Hexagon 100 5.6 Winged Jet Hexagon Jet 0.08” 20 35.5 25.9 10955 29.9 31.6 28.9 5016.4 37.8 9.9 9.7 Orange 0.07” Hexagon 100 5.6 180° 25 40.0 26.0 10975 33.8 36.4 31.4 5017.3 42.3 10.5 10.5 Base PCF-180 with Base 10-32 Gray 0.08” Hexagon 10945 100 5016.7 5.6 30 44.0 25.0 37.0 39.9 35.3 43.5 10.9 10.9 “Quick” Thread UNF Thread Jet Bases White 0.09” Hexagon 10985 100 50 5.6 270° PCF-270 10 35.5 19.4 19.4 23.7 16.1 14.8 23.2 7.7 7.8 Black 0.03” Winged 100 6.5 White 15 44.0 23.3 10705 26.7 30.8 23.1 5018.0PArt 30.0 10.0 9.3 BASE PACk PACkS PEr 360° PCF-360-18Brown 0.035” 20 Winged 100 tyPE 6.5 QUAntIty 0.09” 51.0 CoLor 23.8 10725 31.9 SIzE36.5 29.9 5020.7 34.5 11.3 10.5 orIFICE nUmBEr CArton 25 57.0 23.4 10715 36.5 40.4 33.3 5023.4 37.3 12.1 12.3 Blue 0.04” Winged 100 6.5 90°0.05” Strip Black 0.03” Hexagon 10905 100 360° MIST PCM-360 270°Green 180° 30 63.0 22.7 10735 37.8 43.2 35.3 5025.8 39.9 12.6 13.2 50 Winged 100 6.5 Brown 10925 6.5 100 50 (3 x 90°) fan fan0.06” (2 x 20°) Red Winged 107550.035” 100 Hexagon 50 10 4.0 3.0 Blue 0.04” Hexagon 10915 100 50 Yellow 15 4.8 2.6 Green 0.05” Hexagon 10935 100 50 0.014” 20 5.6 2.9 Red 0.06” Hexagon 10955 100 50 2.8 Winged Jet 25 Hexagon Jet 6.2 Orange 0.07” Hexagon 10975 100 50 0.07” 0.03” 30 6.8 2.6 Base with Base 10-32
6 GPH BLACK
PB-03
CArton (lbs)
SPRayS
SPRayS
10825 10815 10885
EXL SERIES FOGGER UNF Thread
Gray
“Quick” Thread
0.08”
Hexagon
10945
100
50
10705 BASE10725 hEXAgon 10715 0.8” across 10735 flats 0.5” 10755 0.02 oz
100 100 100 100 100
50 50 50 50 50
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
CArton (lbs)
* Minimum opening size for Base and Cap given to 0.09” assist filtration selection. indicate a change White HexagonGhosted figures 10985 100 of performance 50 from Specifications spray to mist.
Black CAP Brown Blue HEIGHT 0.35” Incorporates a vortex design, which swirls the water droplets into a fine mist. Green WIDTH 0.32” Red WEIGHT (approx) 0.007 oz
0.03” Winged BASE wIngED Winged 0.035” 0.04” 0.8” Winged 0.05” across wings 0.5” Winged 0.06” 0.02 ozWinged
DImEnSIonS
acetal
acetal
“QUICK” THREAD 0.16”
10-32 UNF THREAD
0.75 GPH
50-501-13
1 GPH
07-047
2.5
46
7YLZZ\YL WZP
closed structure. 10 0
10
te
CAP 0.35” 0.32” 0.007 oz
UV STABILIZED MATERIALS
acetal
BASE/CONNECTION TYPE: Inlet
20
30
40
+PZJOHYNL NWO
50
Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com
6.5 6.5 6.5 6.5 6.5
W hi
G ra y
HEIGHT 30 be used for overhead Can WIDTH WEIGHT cooling and humidifing in(approx) a 10
•
•
DImEnSIonS
•
Re d
en
re
G
•
40
• Y • ello • Blac w B k • row
Bl n ue
low flow fogger head with Specifications micro-sized droplets.
ge
acetal
O ra n
UV STABILIZED MATERIALS
FlowTYPE: rate BASE/CONNECTION Inlet 0.07” EXL 500 0.03”is designed as a
•
FOGGER
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6
60
BASE wIngED
BASE hEXAgon
0.8” across wings 0.5” 0.02 oz
0.8” across flats 0.5” 0.02 oz
acetal
acetal
“QUICK” THREAD 0.16”
10-32 UNF THREAD
70
80
HOME
GREEN HOUSE FOGGER & MISTER SINGLE STAKE
DOUBLE STAKE
0.5 GPH
SLIMLINE EZ CLOSE 24"
NSLA
3 GPH
PCSS-SPLUM
8 GPH
PCSS-SBROWN
PCSS-DBROWN
9 GPH 10 GPH
VIBRONET BLUE SPRINKLER
VNBS PCSS-SBLUE
PCSS-DBLUE 1
COOLNET FOGGER 8GPH/28PSI
CNET
2
24" ASSEMBLY FOR COOL/VIBRO
CNET-24
3
WHITE STABILIZER WEIGHT
CNET-W
1
2
3
MINI COMPACT ACCESSORIES The anti-leak device is a water pressure valve which opens and closes instantly when pressure builds up. This prevents the micro sprinklers or misters from dripping. 1
½" ADAPTER ExL FOGGER
52-881-0
2
½" ADAP. MINI-COMPACT
52-882-0
3
ExL x ¼" BARB ADAPTER
40985
4
MINI x ¼" BARB ADAPTER
40975
5
FOG NIPPLE
52-140-0
6
FOG PLUG
52-138-0
7
ANTI-LEAK DEVICE
52-530-10
1
2
3
5
6
7
4
47
Pot Spray Stake
The Pot Spray Stake provides every container with a consistent spray pattern and flow. Available in 5.6, 20,5 or 16.0 gph.
NEW
Residential, commercial Feature and Benefit Highlights • Unique positioning arrow ensures that water sprays toward the plant • Stake sets the proper height in the pot • Spray pattern works well from low to high water pressures • 160° low angle spray pattern designed for round pots to reduce overspray • Side arm shut-off with ring gives a water-tight seals preventing debris from getting into the tube
POT STAKE
2 step threaded Actual Size 5 / " Tall inlet easily accommodates most popular Specifying Information polyethylene and vinyl tubing sizes
Additional Features • Steep angle threads easily lock tubing onto the stake • 2 step threaded inlet easily accommodates most popular polyethylene and vinyl tubing sizes • Designed with wide ribs and steps so the stake stays where you place it • Traditional shut off stake end
1
2 Step Inlet Shut-Off Arm NEW Positioning Arrow
• Made with UV resistant resin • Length are 24" (61.0cm); 36" (91.4cm)
Specifications • Available in 3 flow rates: IPS03BK 5.6 gph (21.2 lph) IPS03BL 10.5 gph (39.7 lph) IPS03GR 16.0 gph (60.6 lph)
Part Number
The Pot Spray Stake provides every container with a consistent spray pattern and flow. Available in 5.6, 20,5 or 16.0 gph.
IPS03BK IPS03BL IPS03GR SFH0332-24 SFH0332-36
Actual Size 5 1/4" Tall
PS-SPRAY Specifying Information
Part Number
IPS03BK IPS03BL IPS03GR SFH0332-24 SFH0332-36
Description
5.6 gph (21.2 lph) @ 20 psi (1.4 bar) 0.03" Orifice - Black 10.5 gph (39.7 lph) @ 20 psi (1.4 bar) 0.04" Orifice - Blue 16.0 gph (60.6 lph) @ 20 psi (1.4 bar) 0.05" Orifice - Green 1/8" PEVA leader tubing – 24" (61.0cm) 1/8" PEVA leader tubing – 36" (91.4cm)
Description
5.6 gph (21.2 lph) @ 20 psi (1.4 bar) 0.03" Orifice - Black 10.5 gph (39.7 lph) @ 20 psi (1.4 bar) 0.04" Orifice - Blue 16.0 gph (60.6 lph) @ 20 psi (1.4 bar) 0.05" Orifice - Green 1/8" PEVA leader tubing – 24" (61.0cm) 1/8" PEVA leader tubing – 36" (91.4cm)
DESIGN
5.6 GPH
4
24
S YSTEM
RISER ADAPTER
BUBBLERS
. Components (cont.) . 1/2" Tubing Adapter This flexible Misting Sprinkler is SA700 1/4" Micro-Valve - MV25 . ideal for hanging Glues (with regular P A shut-off/flow control baskets and glue) over standard 1 valve used with 1/4" . . container plants. PVC pipe. Used to ad distribution tubing. CUATRO-FLO™ Bubblers from 1/2" PVC pipe t . . polyethylene tub The CUATRO-FLO™ Bubbler is very similar to the MAXI-FLO™1/2" bubbler, except that . . 4 outlets. There are two basic varieties — the CFL model which has a 1/2" FIPT inlet and 1/2"and Valve - FC700 the CF model which has a 3/4" MIPT inlet and compression outlets. . swivel outlets . A shut-off/flow control FLEXIBLE MISTER FVM-360 valve used with 1/2" . 1/2" Cone Filter . polyethylene tubing. SW50 . A 100 mesh stainles . steel screen element . CF2 CF6 CF10 CF20 . as a backup filter. Fit 2 gph 1/4" Swivel6Tee gph - ST250 10 gph 20 gph Outlet P . into a 1/2"Annipple. (Blue) An adapter(Black) (Green) from the 1/2" (Red) (OP250) ca . nipple to split into two . used to plug 1/4" distribution tubes. up to 2 outl . . . Riser Extender 5 3 . 4 1 1 ½" FIPT x ¼" BARB SAT 2 w/elbow - RA250 . 1/4" Swivel Elbow . An adapter that is SEL250 Outlet Plu 2 ½" FIPT x ¼" ELBOW SEL250 screwed onto an exi OP250 . . from the 1/2" CFL10 CFL2 An adapter CFL6 CFL20 ing 1/2" nipple. 1/4" 2 gph 6 gph 10 gph 20 gph nipple to 1/4" distribution 3 ½" FIPT x ¼" TEE ST250 tubing is then attach . . (Blue) tubing. (Black) (Red) (Green) to the barbed outlet. 4 ¾" FHT x ¼" BARB SAH . CUATRO-FLO™ Selection Chart . NUMBER OF . 5 ½" FIPT x MIPT x ¼" EL RAE-250 RECOMMENDED CANOPY OUTLETS . Shrub Adapter - SAJPER PLANT MODEL DIAMETER . An adapter 2that is . FT 1 CF2/CFL2 screwed directly onto a . 3 FT 1 CF6/CFL6 1/2" nipple. All 10-32 . Rigid Riser Assemb 4 FT 2 A Port Cap The outlet elbows NFT jets and micro. CMAP 6/8/12 5 FT 2 (PC250) ca can be swiveled to CF10/CFL10 . sprays are screwed A 1/4" rigid riser with 6 FT 3 used to plug allow the 1/4" tub. directly into this adapter. 1/2" MIPTany adapter th unused ing (A250) to go in 7-9 FT 3 . CF20/CFL20 screws directly 10-12 FT 4 outlets.into any direction. . 1/2" FIPT PVC fitting . . . Bubblers Available in lengths o HYDROPORT™ . Compression Adapter 6", 8" and 12". The CUATRO-FLO™ Bubbler . . The Agrifim Hydroport™ is a micro irrigation watering manifold that delivers water up to . 4 PORT 20 GPH BUBBLER CFL20 CA250 flows per outlet. It allows you to convert MAXI-FLO™ Bubblers . eight different plants with independently adjustable . Port Cap is a four outlet, pressure an underground adapter is glued . The that Hydroport™ has a 1/2" female . system to a dripAnsystem. PC250 MAXI-FLO™ Bubbler is a six outlet, pressure compensating emitter. Water is then . threaded base andsprinkler 6 PORT 0-20 GPH ADJ.The BUB MFBA . screws onto a standard 1/2"any nipple. Theslip discharge rate/outlet is into 1/2" PVC transferred to the plant through distribution tubing (A250). The MAXI-FLO™ has a 1/2" compensating emitter. adjustable from 0-20. GPH. The water flowfitting. of each1/4" port can simply be controlled with a coin. female threaded base and screws onto a standard 1/2" nipple. The discharge rate/outlet . tubing . . remains constant regardless of how many outlets are used. Each outlet has a barbed The Cuatro-Flo (C Each outlet has a barbed horizontal connection making it extremely simple to attach the 8 PORT 0-20 GPH BUB. HPAM8 Water is (A250)to is attached horizontal connection making it extremely simple to attach the tubing after installation. suit various watering needs. model screws direc . . tubing .after installation. . Two models are offered directly to this adapter. a 1/2" nipple. 1/4" tub transferred . to the plant . (A250) or DURA-FLO . 6 through distribution tubing. . Dripperline is then a . 24
BUBBLERS
MFBL2 2 gph
MFBL6 6 gph
(BLUE)
(BLACK)
Port Cap PC250
Distribution tubing, (A250) is simply pushed over the barb. For unused outlets, insert a port cap (PC250) over the barb.
The discharge rate/outlet is adjustable from 0-20 GPH. The water flow of each port can simply be controlled with a coin.
MFBL20 20 gph
(RED)
(GREEN)
Distribution Tubing
All the MAXI-FLO’s™ can be used for new installations or for retrofits. The 1/2" FIPT inlet allows it to easily attach to a 1/2" nipple in an underground PVC system. The MAXI-FLO™ can be used with distribution tubing (A250) or DURA-FLO™ JR Dripperline or a combination of both.
S6
The end of the tubing may be secured by a support stake (S6). The bug plug (BP250) prevents insects from entering the tubing.
48
MFBL10 10 gph
BP250
The distribution tubing (A250) can also be buried with just the emission point and the optional bug plug above the surface.
. . . . . . . . . . . . . . . . . . . .
21
BUBBLERS
CUATRO-FLO BUBBLER
TM
26
. . . The MAXI-FLO™ can be used for new . HPAM8 HPAM4 installations or for retrofits. The ½” FIPT inlet . allows it to easily attach to a ½” nipple in an . underground system. The MAXI-FLO™ can be . Part # used with distribution tubing or Product ¼” Description dripperline HPAM 4 Hydroport™ 4 Port Drip Manifold . HPAM 8 Hydroport™ 8 Port Drip Manifold or a combination of both. . . . . ABOVE GRADE BELOW GRADE . . . . . . . 24
to the barbed outlet
Part No.
MTEEMC 250 1⁄2"
ORBIT BUBBLER
MC 500 MC 710
1
2 PORT ½" FIPT BUBBLER
ST250F
2
2 PORT ½" MIPT BUBBLER
ST250M
3
4 PORT ½" FIPT BUBBLER
QUAD4
4
4 PORT ½" FIPT x MIPT
QUAD4S
5
4 PORT ½" ADJ. BUBBLER
QUAD4-A
6
8 PORT ½" ADJ. BUBBLER
APOLLO-8
•Two ¼” barbed ports with threaded caps. •Filter basket included. •Connects to a ½” threaded riser.
⁄4"
CAP 75
3
SAH W 75
Ad
BP 250
MTEE
PHA 75
2
1
⁄"
3
TNPH
BUBBLERS
•Connects to ½” female threaded pipe fittings 4 . .75 CAP •Two ¼” barbed with threaded caps. TM 3 The CUATRO-FLO (CF) can be buried or used above ground. ports 1/4" distribution 4 •Includes filterthe toCF prevent . tubing (A250) or DURA-FLO™ JR Dripperline is pushed directly into outlets.clogged nozzles.
⁄"
SAH. . CF2/ CFL2 CF6/ CFL6 CF10/ CFL10 CF20/CFL20 •Four ¼” barbed ports with threaded . CUATRO-FLO™ Bubblers . 3 4 20 psi 1.8 gph ¼” 5.7barbed gph 7.6 gph with 13.7 gph •Four ports threaded caps caps Cuatro-Flo (CF)The CUATRO-FLO™ Bubbler is very similar to the MAXI-FLO™ bubbler, except that it has . 4 outlets. .75 •Easy to7.8 remove filter helps toFIPT prevent clogged 3/4" PVC Tee basic — the CFL model which has a18.8 1/2" inletPHA and barbed 40 There psi are two 2.2 gphvarieties gph 11.0 gph gph •Easy to remove filter - Prevents (SST) swivel outlets and the CF model which has a 3/4" MIPT inlet and compression outlets. nozzles. . clogged nozzles. 60 psi 2.5 gph 8.9 gph 13.3 gph 22.2 gph . •Connects to a ½” threaded riser. •Connects to a ½” threaded riser. . 80 psi 2.5 gph 10.0 gph 15.0 gph 25.3 gph TNPH . . Tubing Length Recommendation . . •Flow control for all four ports - For preCF2 CF6 CF10 CF20 Distribution 1/4" Tubing 2 gph 6 gph 10 gph 20 gph An Outlet Plug Tubing 5 6. 25' max. 25'max. 25'control max. max. cise flow adjustment (Blue) (Black) (Red) flow (Green) -25' •Individual permits precise 3/4" Elbow (OP250) can be (A250) . used to plug off. •Four ¼” barbed ports with threaded (TT) flow adjustment for each outlet. DURA-FLO 4' min. 7'min. 9' min. 10' min. up to 2 outlets. caps . •Eight barbed ports Part with threaded No. . De JR (12") 10' max. 15'¼” max. 18' max. 22' max. •Easy to remove filter helps to prevent caps. . 2' min. 3'min. 5' min. 5' min. DURA-FLO Cuatro-Flo (CF) clogged nozzles •Easy8'tomax. remove filter helps to prevent. 3/4" Nipple . 5' max. 9' max. 11' max. JR (6") Outlet Plug OR 027 R clogged nozzles. OP250 CFL2 CFL6 CFL10 CFL20 .. . 2 gph 6 gph 10 gph 20 gph OR 141 CUATRO-FLO™ Bubblers R (Blue) (Black) (Red) (Green) .. The CUATRO-FLO™ Bubbler is very similar to the MAXI-FLO™ bubbler, except that it has . CUATRO-FLO™ Selection Chart . . 4 outlets. There are two basic varieties — the CFL model which has a 1/2" FIPT inlet and barbed Part No. outlets and the CF model which has a 3/4" OF MIPT inlet and compression outlets. NUMBER . . swivelRECOMMENDED CANOPY OUTLETS . ELI R MODEL DIAMETER PER PLANT .. OR 027 2 FT 1 CF2/CFL2 . . . 3 FT 1 OR 141 CF6/CFL6 4 FT 2 . A Port Cap The outlet elbows CF2 CF6 CF10 CF20 REPLACE. EL CFL,MFBL ELI . . 2 2 CF10/CFL10 gph 6 gph5 FT 10 gph 20 gph (PC250) can be can be swiveledAntoOutlet Plug . Cuatro-Flo (Blue) (Black) (Red) (Green) 6 FT 3 used (OP250) can be to plug off allow the 1/4" tubRiser swivel . REPLACE. VALVE MFBA MVI (CFL) . ELI . to plug off unused R any ing (A250) to goused inMVI 7-9 FT 3 Bug plugs Riser Swivel Filter CF20/CFL20 unionizes the 10-12 FT 4 outlets. any direction. up to 2 outlets. PORT PLUG FOR CF BUBB. OP250 .. (RSF100) bubbler for easy . .. PORT PLUG FOR CFL BUBB. PC250 removal without The CUATRO-FLO™ can be installed in many ways, . . RISER SWIVEL FOR BUBB. RS tangling the Bubbler replacement . either at grade or below grade. Below grade applicaPort Cap MVI Port Plugs . . tubes. CFL2 CFL6 CFL10 CFL20 PC250 often used in conjunction emitter BUG PLUG BP250 parts D 90 R 2 gphtions are 6 gph 10 gph 20 gph with an .. (Blue) (Red) (Green) 1/2" Nipple access (Black) box (EB6). The CUATRO-FLO™ canThebeCuatro-Flo used (CFL) . .. model screws directly onto with or without the riser swivel filter (RSF100). a 1/2" nipple. 1/4" tubing. . (A250) or DURA-FLO™ D 90JR . . Dripperline is then attached Cuatro-Flo to the barbed outlets. . D 80 H R .26 1/4" Tubing Cuatro-Flo (CF) Bug Plug (CFL) A Port Cap The outlet elbows . . (PC250) can be can be swiveled to used to plug off allow the 1/4" tub. D 80. H any unused ing (A250) to go in outlets. any direction. . Riser . All dimensions. are n Swivel . Filter 1/2" Nipple All dimensions a 3/4" Nipple 3/4" Tee (TTT) . . For customer se . The Cuatro-Flo (CFL) . directly ontocustomer . 3/4" PVC Tee 3/4" PVCmodel Tee screwsFor BUBBLERS
Discharge Rates/Outlet
1/4" Tubing
TM
TM
TM
BUBBLER ACCESSORIES
BUBBLERS
TM
TM
Outlet Plug OP250
TM
CUATRO-FLO™ Selection Chart
TM
NUMBER OF OUTLETS PER PLANT
RECOMMENDED MODEL
CANOPY DIAMETER
CF2/CFL2
2 FT
1
CF6/CFL6
3 FT 4 FT
TM 1
CF10/CFL10
5 FT 6 FT
2 3
CF20/CFL20
7-9 FT 10-12 FT
3 4
2
Port Cap PC250 TM
3/4" x 3/4" x 1/2" Tee (SST)
3/4" PVC Pipe
.
26
(SST)
(SST)
a 1/2" nipple. 1/4" tubing (A250) or DURA-FLO™ JR Dripperline is then attached to the barbed outlets.
27
49
STAKES AND RIGID RISER RIGID RISER
8"
ASTA-8
8"
PRR-8
12"
ASTA-12
12"
PRR-12
16"
ASTA-16
18"
PRR-18
21"
ASTA-21
18" with ½" MIPT
PRRA-18
12" with 24" TUBE
ASTA-250
TUBE ADAPTER
ASTA-A
MICRO-SPRAYS
ASTA STAKE
1
6" CAGE STAKE
AS-06H
2
¼" WIRE STAKE 10/PK
S250
3
¼" x 6" CLIP STAKE
S6
4
ASTA HOLD DOWN STAKE
S7
5
8" WIRE STAKE
S8
6
14" STABILIZER STAKE
S14
. HYDRO-POP™ Pop-up Risers . The HYDRO-POP is a pop-up sprinkler for micro-irrigation jets and sprinklers. It is designed . specifically for low volume irrigation. Hence, it can operate at very low pressures. Simply . screw the head of your choice into the hexagonal riser. Any of the following spray heads can be screwed into the top of the HYDRO-POP riser. . • One-piece HYDRO-FLO (TF) • DIAL-A-FLO (DAFT) . • MICRO-FLO (MF) • Two-piece HYDRO-FLO • Adjustable MICRO-FLO (TFB/TFC) . (MFA) • Adjustable HYDRO-FLO (VF) . . . . . . The HYDRO-POP is available Two inlet connections are with either a 5" or 9" riser available — a 1/2" MIPT . extension height. that screws directly into a PVC tee or with a comThe HYDRO-POP just requires . The top of the HYDRO-POP 15 psi pressure to extend it fully. pression fit that accepts extend . should Once the system is switched off, 1/4" polyethylene tubing about 1" above (A250). it immediately retracts. . grade. 1" (Cutaway drawing) . Protective The protective housing (PUPT or Housing PUPS) option is used to protect . the spray head when not in the HYDRO-POP extended BARB x THREAD x position. The housing TEEis CROSS GOOF PLUG . Pop-up Riser simply pushed over the top of the . HYDRO-POP . THREAD THREAD . PVC System . . C250 . Part # Description HYP 500 9" pop-up riser with 1/2" MIPT inlet . HYP 250 9" pop-up riser with 1/4" tubing inlet . HYPJ 500 5" pop-up riser with 1/2" MIPT inlet TM
1
2
3 4
5
TM
TM
TM
TM
6
TM
TM
TM
TM
TM
TM
➔
➔
⅛” AND ¼” MICRO FITTINGS
¼"
COUPLING SHORT
COUPLING LONG
BB250
CO-250A
TM
TM
CB-1032 34
PRRA-1032HHYPJ 250T-250 CR-250 5" pop-up riser with 1/4" tubing inlet
Polyethylene System
RAINBIRD SELF PIERCING FITTINGS
CONNECTOR
ELBOW
50
XBF1CONN
XBF2EL
XBF3TEE
DRIPPER
TEE
¼"
P-250
0.5 GPH 1 GPH
XB05PC XB10PC
2 GPH
XB20PC
FASTENERS TUBE NAIL CLAMP
PIPE OD NAIL CLAMP
OD 2 HOLE CLAMP
¼"
TC-250N
-
-
3/8"
TC-455
-
-
½"
TC-700
C-005
-
¾"
-
C-007
SC-005
1"
-
C-010
SC-007
1-¼"
-
-
SC-010
1-½"
-
-
SC-012
PUNCH TOOLS 1
KEY PUNCH CAP REMOVER
KPY
2
AGRIFIM HOLE PUNCH
HP100
3
PRO PUNCH GUN
P-PUNCH
4
SELF PIERCING INSERT TOOL
XMTOOL
1
2
3
4
51
ROTORS Rotors sprinkler operate by rotating a stream of water over the landscape instead of the mist produced by spray head sprinklers. This allows rotors to be placed farther apart than spray head sprinklers. Rotors are designed to rotate in full or partial circles and generally do not perform with a throw radius of less than 15 feet. We carry a huge selection of pop-up rotors for all types of sprinkler system applications, from smaller residential landscapes to large commercial areas, such as sports fields, public parks, and schools. Welcome to Quality Valve & Sprinkler -
Quality Valve & Sprinkler
IMPACT ROTORS
Home
Contact Us
Category
About Us
1
My Account
Home > 5417
Search
GO
2
Maxi-Paw and Maxi-Bird Nozzle Performance Q V Pressure Nozzle Radius Flow Precip Precip 2 ½" DELUXE IMPACT 2045PJ08 » Nozzles and Wands Category Results psi ft. gpm In/h In/h » Garden Hoses & Hose 25 Sprinklers (1) 06 3 ½" ECONO IMPACT 60P Lawn & Garden Sprinklers > Plastic Impact Accessories 07 LA 22 1.5 0.60 0.69 4 ½" ZINC IMPACT 90DZ » Gutter Cleaners Search Results (1 Matches found ) Price:Low Low High Price: to to High » Sprinkler Spikes & Bases 5 ½" ADJUSTABLE IMPACT 90A -" » Underground PopUp ECONOMY Full Circle Impact SERIES - QVS 1/2" Plastic Adjustable Part or Sprinklers Sprinkler / 27 Deg / 9/64" Nozzle 6 ¾" ADJUSTABLE IMPACT 261SA 12 39 5.5 0.70 0.80 » Tri-Pods with Sprinklers 35 06 37 2.0 0.28 0.32 Category: Lawn & Garden Sprinklers > Plastic Impact Sprinklers 07 LA 23 1.9 0.69 0.80 » Gauges 1/2" Plastic Adjustable Impact Sprinkler w/ 9/64" Nozzle » Valves Your Price: $2.98 0 Review(s) » Weld Flanges and Fittings -" Add to Cart Mailing List Subscribe to our Newsletter 45 06 38 2.3 0.31 0.35 07 LA 25 2.1 0.65 0.75 GO Subscribe -" Unsubscribe • Terms and Conditions 55 06 38 2.5 0.33 0.39 Copyright 2011 Quality Valve & Sprinkler. All Rights Reserved. eCommerce software powered by 3DCart. 07 LA 25 2.3 0.71 0.82 -" 60 -" 3504 Series Nozzle Performance Q V Pressure Nozzle Radius Flow Precip Precip The 3500 Series Rotor is an easy to use short to mid-range ½” gear -" psi ft. gpm In/h In/h 25 drive rotor, offering value and convenience for residential applications.
1
POPUP IMPACT ROTOR
» Lawn & Garden Sprinklers TITAN » Commercial Ag Sprinklers
Your search for "5417" returned the following results...
3
5
6
Rotors
4
RAINBIRD 3500 SERIES
Utilizing a simple flat-bladed screwdriver, the 3500’s arc adjustment is quick and easy. 3504PC
½" GEAR ROTOR W/ SAM
3504PCSAM
½” SHRUB ROTOR W/ SAM
3500SPCSAM
52
http://www.qvsprinkler.com/search.asp?keyword=5417[02/23/11 1:59:52 PM]
Precipitation rates based on3.0 half-circle operation 29 2.17 0.50 0.57 Q Square spacing based on 50% diameter of throw V Triangular based on 50% diameter of throw 35spacing 3.0 31 2.60 0.52 0.60 206592-08 206592-10 206592-12 45 0.75 17 0.77 0.51 0.59 2.0 27 1.93 0.51 0.59 3.0 31 3.00 206592-07 0.60 0.69 206592-06 55 0.75 18 Maxi-Paw 0.85 and 2045-PJ 0.51 0.58 2045A Standard Angle Nozzles 2.0 28 2.15 0.53 0.61 3.0 32 3.25 0.61 0.71 LA = Low Angle
Rotors
½" GEAR ROTOR
tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt t
56
Precipitation rates based on half-circle operation
Maxi-Paw an Pressure bar 2.0
2.5
3.0
3.5
4.0
tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt t
3504 Series No
Pressure bar 1.7
No
1.0 Performance data co 2.0 de Performance data See page 177 for com 2.0 3.0 2.5 0.75 2.0 3.0 0.75 20 3.5
Rotors
www.rainbird.com/rotors
RAINBIRD 5000/5000 PLUS SERIES
5000 Series
5000 Series Std. Angle Rain Curtain™ Nozzle Performance Pressure bar 2.0
2.5
3.0
3.5
4.0
Q V The Flow nextPrecip evolution Radius Flow Precip in rotor performance. Rugged midm m3⁄h l/m mm/h mm/h range ¾” inlet gear-drive rotor sprinkler, offering durability, 2.0 10.8 0.36 6 7 Rain6.0Curtain nozzle performance, flow shut-off and top adjustment convenience for residential, commercial and 3.0 11.2 0.55 9.0 9 10 field athletic sites with spacing up to 50 feet. Now available with optional in-stem pressure regulation (PRS). 3.0 11.2 0.62 10.2 9 11 ROTOR C/W SAM SHRUB 5000SPCSAM ROTOR 4" POPUP 5004PC 8.0 13.3 1.63 27.0 19 21 C/W SAM 4" ROTOR 5004PCSAM 2.5 11.3 0.56 9.6 9 ROTOR 10 6" POPUP 5006PC W/SAM 4" PLUS ROTOR 5004+PCSAM 4" PLUS STAINLESS W/SAM 5004+PCSAMRSS 12”6.0PLUS W/SAM 5012+PCSAMR 1.5 10.7 0.37 7 ROTOR 8 2.5 11.3 0.60 10.2 9 11 Optional shut off for the 5000 Plus series complete with seal-a-matic (SAM) 2.0 11.1 0.52 9.0 8 10 3.0 12.2 0.80 13.2 11 12 2.0 10.7 0.55 9.0 10 11 High-Speed Falcon® 6504 Nozzle Performance 8.0 15.2 2.19 36.6 19 22 Q V Pressure Nozzle Radius Flow Precip Precip Pressure psi ft. gpm In/h In/h psi 30 30 40 40 40 - 360 ARC 41 10 51 8.1 0.60 0.69 12 53 9.7 0.66 0.77 16 55 12.6 0.80 0.93 18 59 13.7 0.76 0.87 50 50 10 53 9.1 0.62 0.72 12 55 11.0 0.70 0.81 17’ - 65’ 60 60 8 51 8.2 0.61 0.70 12 57 12.2 0.72 0.83 16 63 15.7 0.76 0.88 18 63 17.1 0.83 0.96 70 70 8 51 8.9 0.66 0.76 16 63 16.9 0.82 0.95 18 65 18.3 0.83 0.96 80 80
Nozzle
Rotors
5000 Series Std. Angle Rain Curtain™ Nozzle Performance Q V Pressure Nozzle Radius Flow Precip Precip psi ft. gpm In/h In/h 25 1.5 33 1.12 0.20 0.23 2.5 35 1.81 0.28 0.33 8.0 36 5.90 0.88 1.01 35 2.0 36 1.81 0.27 0.31 2.5 37 2.17 0.31 0.35 45 55 1.5 35 1.71 0.27 0.31 2.0 37 2.30 0.32 0.37 8.0 50 8.86 0.68 0.79 65
RAINBIRD FALCON® 6504 SERIES 4.5
Precipitation rates based on half-circle operation
Performance data collected in zero wind conditions Performance data derived from tests that conform with ASABE Standards; ASABE S398.1. With the Falcon 6504 rotor, you can have it See page 177 for complete ASABE Test Certification Statement. Q Square spacing based on 50% diameter of throw
V Triangular spacing based on 50% diameter of throw
all -- uncompromising performance, superior distribution, reliability and durability. Rain Curtain™ nozzles maximize performance and coverage. A multi-function wiper seal and tapered riser keep the stem clear of debris, providing long-term The Intelligentprotection. Use of Water.™ Ideal for large turf sites with spacing up to 65 feet
F4PC F4PCSS F4FC F4FCSS
Rotors
1” PC GEAR ROTOR 1” PC ROTOR STAINLESS 1” FC GEAR ROTOR 1” FC ROTOR STAINLESS
tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt t
53
tt tt t tt tt RAINBIRD 8005 SERIES tt tt tt The Rain Bird® 8005 Rotor is built rugged to t withstand the harsh conditions and vandalism 50 - 360 ARC tt present in commercial rotor applications. It has tt been designed and tested to ensure the high tt reliability demanded by the market today. Its extensive customer identified features and 80 foot tt radius make it ideal for sports fields, parks and tt other large turf applications. MINIPRO ™ GEAR DRIVEN SPRINKLERt SETTING INSTRUCTIONS tt tt SPRINKLER INSTALLATION tt L 1" GEAR ROTOR 8005 tt 1" GEAR ROTOR STAINLESS 8005-SS tt t 39’ - 81’ M ttN tt ttO P tt tt t tt WES-TECH MINI PRO GEAR ROTOR ttt t When spray heads won’t do the job and a full size rotor is just too much, you need the Wes-TechtMini Pro Rotor. Designed to fill in that hard to cover area between 17’ and 30’, the Wes-Tech Mini Pro provides t ttgreat value and water efficiency for your landscapes. It will work under low pressure when other rotors will not. It’s simple t top arc indicator ensures easy adjustment from 40 to 360 degrees..
Rotors
18 63 16.1 20 65 18.6 60 10 53 10.1 12 59 12.0 8005 Nozzle Performance 20 67 20.1 22 71 23.2 Pressure Nozzle Radius Flow psi ft. gpm 26 73 26.7 50 70 10 55 11.1 12 57 11.1 Page 02-18_MiniPro_HP_InstSheet_6 Language Instructions 2/12/18 3:23 PM 2 63 16.1 18 67 19.3 20 65 18.6 22 73 25.2 60 80 Continued 53 10.1 10 55 11.8 12 59 12.0 Key in Keyhold L 1. INSTALL AND BURY 16 67 18.6 18 69 20.9 Thread the sprinkler on the pipe. Bury the sprinkler 67 20.1 20 71 23.9 flush to grade. NOTE: Do not use pipe dope. Gear driven 71 23.2 22 75 27.3 sprinklers and pop-up sprays should not be installed on 73 26.7 26 79 31.5 Turret M the same watering zone. 70 N Nozzle 2. INSPECTING THE FILTER Socket 10 55 11.1 Unscrew the top and lift the complete sprinkler assembly O Lower out of the housing can (S). The filter is located on the Riser 52 bottom of the sprinkler assembly and can be easily 18 67 19.3 pulled out, cleaned and re-installed. 22 73 25.2 3. WINTERIZATION TIPS When using an air compressor to remove water from the 80 system please note the following: a. Do not exceed 30 PSI. 10 55 11.8 b. Always introduce air into the system gradually to avoid air pressure surges. Sudden release of compressed 16 67 18.6 air into the sprinkler can cause damage. 18 69 20.9 20 71 23.9 c. Each zone should run no longer than 1 minute on air. 22 75 27.3 Sprinklers turn 10 to 12 time faster on air than on water. Over spinning rotors on air can cause damage 26 79 31.5 Rotors
to the internal components.
t tt t
0.78 0.90 0.85 0.98 100 20 22 26 Precipitation rates based on half-circl Q Square spacing based on 50% dia V Triangular spacing based on 50% di 0.69 0.80 Performance data collected in zero w 0.66 0.77 Performance data derived from tests th See page 177 for complete ASABE Test 0.86 1.00 0.89 1.02 Q V Precip Precip Pressure Nozzle psi In/h In/h 0.96 1.11 90 16 18 0.71 0.82 0.66 0.76 20 22 0.78 0.90 0.83 0.96 0.85 0.98 100 20 22 0.91 1.05 26 Precipitation rates based on half-circl Q Square spacing based on 50% diam V Triangular spacing based on 50% di 0.69 0.80 0.75 0.87 Performance data collected in zero w 0.66 0.77 Performance data derived from tests th See page 177 for complete ASABE Test 0.80 0.92 0.85 0.98 0.86 1.00 0.91 1.05 0.89 1.02 0.93 1.08 0.96 1.11 0.97 1.12 0.71 0.82 8005 Cutaway P NOZZLE KEY NOTCH 0.83 0.96 0.91 1.05 0.75 0.87 0.80 0.92 0.85 0.98 0.91 1.05 0.93 1.08 0.97 1.12
tt tt tt t tt t
8005 Cutaway ______________________ Company Name
ADJUSTABLE MINI ROTOR
Please Note:
_______________________ Printed Name
______________________ Qty
_______________________ Signature
_______________________ Date
WMPR
52
The rubber cover will be all black.
K-Rain Manufacturing Corp. 1640 Australian Avenue I Riviera Beach, FL 33404 USA PH: 561-844-1002 I 1-800-735-7246 I FAX: 561-842-9493 WEB: http://www.krain.com
54
13005105 Rev. 16
The colored engraving is for demonstration purposes only.
© K-RAIN Manufacturing Corp.
n mm/hrs
.25 .27 .31 .37 .26 .29 .32 .34 .33 .40 .45 .45 .41 .46 .47 .53 .51 .55 .62 .58 .65 .66 .76 .78 .78 .86 .86 .87 .83 .90 .95 .96 .22 .06 .14 .17
5 6 7 8 6 6 7 7 7 9 10 10 9 10 10 12 11 12 13 13 14 14 17 17 17 19 19 19 18 20 21 21 27 23 25 26
6 7 8 9 6 7 8 9 8 10 11 11 10 12 12 13 13 14 16 15 16 17 19 20 20 22 22 22 21 23 24 24 31 27 29 30
counter-clockwise. During system operation, the riser will remain elevated. To open flow again, turn key clockwise.
2. PULL UP THE RISER
P Flow Insert the key (A) in the keyhole (C) on the top of the nozzle turret (D) and turn the key SPRINKLER INSTALLATION ¼ turn to insure that the key does not Control & slip out of the keyhole when you pull it up. Firmly K 1. INSTALL AND BURY pull up the entire spring-loaded riser Shut Off to access the nozzle socket (G). Hold the riser Can Thread the sprinkler on the pipe. Bury the sprinkler flush to grade. assembly with one hand. C Keyhole NOTE: Do not use pipe dope. Gear driven sprinklers and pop-up sprays should not be installed on the same watering zone. 3. REMOVING THE NOZZLE
WES-TECH SUPER PRO With the nozzle retention screw (M) removed or backed out, use a pair of needle-nose
LOW PERFORMANCE DATA pliers to pullANGLE outward on the nozzle fin (H) removing the nozzle.
#1.5 30 THE 207 ARC 2,1 27 8,2 1.4 5,3 0,3 0.37a. Do0.43 9 11 SETTING ADJUSTMENT not exceed 30 PSI. 276 1.7 6,4 0,4 0.42 0.48 11 12 1. FINDING 40 THE LEFT START2,8 POSITION28 8,5 b. Always introduce air into the system gradually to avoid air pressure surges. 50 345 3,4 31 9,4 1.9 7,2 0,4 0.38 0.44 10 11 Place your finger on the top center of the nozzle turret (D). Rotate the turret to the right air into the sprinkler can cause damage. 60 414 4,1 30 9,1 2.1 7,9 0,5 0.45 Sudden 0.52 release 11 of compressed 13 until it stops and then back to the left until it stops. Notice the position of the nozzle zone should #2 207Start”2,1 30 sprinkler 9,1 will2.1 7,9 from 0,5 this 0.45c. Each 0.52 11 run 13no longer than 1 minute on air. Sprinklers turn arrow. (L) This30 is the “Left position. The begin spraying 10 to 12 time faster on air than on water. Over spinning rotors on air can cause 40 clockwise 276 until 2,8it reaches 31the9,4 2.4 Stop-Return 9,1 0,5 position and rotate right Adjustable Point. 0.48 0.56 12 14 50 345 3,4 33 10,1 2.8 10,6 0,6 0.50 damage 0.57 to the 12internal 14 components. 60 414 4,1 31 9,4 3.1 11,7 0,7 0.62 0.72 16 18 L Nozzle Arrow #3 30 207 2,1 32 9,8 3.0 11,4 0,7 0.56 0.65 14 16 M Nozzle 40 276 2,8 34 10,4 3.5 13,2 0,8 0.58 0.67 15 17 Retention 50 345 3,4 35 10,7 3.9 14,8 0,9 0.61 0.71 15 18 Screw 60 414 4,1 35 10,7 4.3 16,3 1,0 0.68 0.78 17 20 ®
RPS DATA SELECT ROTOR PERFORMANCE #1
#1.5
er, divide by 2.
#2
#2.5 Preinstalled #3
#4
#5
#6
#8
E Riser
2. INSPECTING THE FILTER
Unscrew the top and lift the complete sprinkler assembly (J) out of the housing can (K). NOZZLE PRESSURE RADIUS FLOW RATE PRECIPITATION The filter is located on the bottom of the sprinkler assembly and can be easily pulled 4. INSTALLING A NOZZLE PSI kPa Bars Ft. M. GPM L/M M3/H n in/hr s n re-installed. mm/hrs out, cleaned and Press the desired nozzle into the nozzle socket (G). make sure the nozzle fin (H) #1.0 30 207 2,1 26 7,9 1.1 4,2 0,2 0.31 0.36 8 9 is on the right. Then reinstall or tighten down the nozzle retention screw (M). 40 276 2,8 30 9,1 1.3 4,9 0,3 0.28 3. 0.32 7 8TIPS WINTERIZATION NOTE: The nozzle retention screw is also a break-up screw and used to adjust 50 345 3,4 30 9,1 1.4 5,3 0,3 0.30When0.35 8 9 using an air compressor to remove water from the system please the distance of the spray. 60 414 4,1 30 9,1 1.6 6,1 0,4 0.34note0.40 9 10 the following:
NOZZLE
D Nozzle Turret
G Nozzle Socket
Specifications
K Can
H Nozzle Fin
C Key in Keyhole
J Sprinkler
The K-Rain RPS Select rotary sprinkler is the first n Radius: 25' N – Arc 46'Set Assembly PRESSURE RADIUS FLOW RATE PRECIPITATION gear-driven sprinkler GPM that makes matched precipitation Adjustment PSI kPa Bars Ft. M. L/M M3/H n in/hr s n mm/hrs n Flow rate: 1.3 – 6.8 GPM fast and easy, without the need for cumbersome changing MANUFACTURING 30 207 2,1 33 10,1 1.2 4,5 K-RAIN 0,3 0.21 0.25 5 6 CORP. 40 276 of 2,8 10,1 1.3 4,9in the 0,3 0.23 0.27 6 7 nozzles33 or sprinkler heads field. The RPS Select n Recommended operating pressure: 25 – 75 PSI 1640 Australian Avenue, Riviera Beach, FL 33404 USA P Flow 50 345 offers 3,4 a choice 33 10,1 1.5 5,7 0,3 0.27 0.31 7 of 4 selectable built-in nozzles. With1.800.735.7246 a twist8 Control & PH: 561.844.1002 FAX: 561.842.9493 K n Optimum 60 414 4,1 33 10,1 1.8 6,8 0,4 0.32 0.37 8 9 nozzle performance: 40 PSI of a screwdriver, quickly select the correct nozzle flow to Shut Off Can 30 207 2,1 36 11,0 1.5 5,7 www.krain.com 0,3 0.22 0.26 6 6 Keyhole n Standard 4" pop-up for lawn C areas arc 11,3 setting1.8 of the6,8 sprinkler, or dry. No nozzle 40 276 match 2,8 the37 0,4 wet 0.25 0.29 6 7 50 345 trees 3,4 to carry 37 or 11,3 0,5 for0.28 0.32 8 lose.2.0 Fewer7,6 chances errors. Using7 Corp. n 3⁄4" © K-RAIN Manufacturing 11005112 REV17 female-threaded inlet NPT 60 414 4,1 38 11,6 2.2 8,3 0,5 0.29 0.34 7 9 a combination of the four nozzles, it’s easy to achieve 30 207 2,1 35 10,7 1.8 6,8 0,4 0.28 0.33 7 8 n Optional drain check valve controls up to 10' LOW ANGLE PERFORMANCE DATA matched precipitation across all arc settings. 40 276 2,8 35 10,7 2.2 8,3 0,5 0.35 0.40 9 10 of elevation change NOZZLE PRESSURE RADIUS FLOW RATE PRECIPITATION 50 345 3,4 36 11,0 2.6 9,8 0,6 0.39 0.45 10 11 Independent research reveals that most contractors don’t PSI kPa Bars Ft. M. GPM L/M M3/H n in/hr s n mm/hrs 60 414 4,1 38 11,6 2.9 11,0 0,7 0.39 0.45 10 11 change out factory-installed nozzles to match the sprinkler’s #1.0 30 207 2,1 26 7,9 1.1 4,2 0,2 0.31 0.36 8 9 30 207 2,1 37 11,3 2.5 9,5 0,6 0.35 0.41 9 10 Nozzle Arrow 40 276 2,8 30 9,1 1.3 4,9 0,3 0.28 0.32 7 8 40 276 area 2,8of coverage. 38 11,6When 3.0 the11,4 0.40 nozzle 0.46 is10 same0,7 3.0 gallon used12 50 345 3,4 30 9,1 1.4 5,3 0,3 0.30 0.35 8 9 12 50 345 for3,4 40 12,2 3.4 12,9 0,8 0.41 0.47 10 all arcs, the result is areas that are dramatically Nozzle Selector Radius Control 60 414 4,1 30 9,1 1.6 6,1 0,4 0.34 0.40 9 10 60 414 4,1 40 12,2 3.8 14,4 0,9 0.46 0.53 12 13 under-watered. Select offers #1.5 30 207 2,1 27 8,2 1.4 5,3 0,3 0.37 0.43 9 11 30 207 over-watered 2,1 36 or 11,0 3.0 11,4 The 0,7 RPS 0.45 0.51 11 13 convenience with greater water0.55 efficiency. 40 276 2,8 28 8,5 1.7 6,4 0,4 0.42 0.48 11 12 40 276 factory-nozzle 2,8 37 11,3 3.4 12,9 0,8 0.48 12 14 50 345 3,4 31 9,4 1.9 7,2 0,4 0.38 0.44 10 11 50 345 3,4 38 11,6 4.0 15,1 0,9 0.53 0.62 13 16 Setting 0,5 0.45 0.52 11 13 RPS0.58 Select13 a 15 60 414 4,1 30 9,1 2.1Arc 7,9 60 414 The 4,1four on-board 41 12,5 nozzles 4.4 also 16,7 make 1,0 the 0.50 Indicator 30 207 convenient 2,1 37universal 11,3 4.0 15,1 0,9 0.56for0.65 14 16 replacement sprinkler other brands. #2Lifting Socket 30 207 2,1 30 9,1 2.1 7,9 0,5 0.45 0.52 11 13 40 276 2,8 39 11,9 4.5 17,0 1,0 0.57 0.66 14 17 40 276 2,8 31 9,4 2.4 9,1 0,5 0.48 0.56 12 14 50 345 3,4 39 11,9 5.2 19,7 1,2 0.66 0.76 17 19 50 345 3,4 33 10,1 2.8 10,6 0,6 0.50 0.57 12 14 60 414 4,1 40 12,2 5.6 21,2 1,3 0.67 0.78 17 20 60 414 4,1 31 9,4 3.1 11,7 0,7 0.62 0.72 16 18 30 207 2,1 37 11,3 4.8 18,2 1,1 0.68 0.78 17 20 #3 30 207 2,1 32 9,8 3.0 11,4 0,7 0.56 0.65 14 16 Arc Adjustment Slot 40 276 2,8 38 11,6 5.6 21,2 1,3 0.75 0.86 19 22 40 276 2,8 34 10,4 3.5 13,2 0,8 0.58 0.67 15 17 50 345 3,4 41 12,5 6.5 24,6 1,5 0.74 0.86 19 22 50 345 3,4 35 10,7 3.9 14,8 0,9 0.61 0.71 15 18 60 414 4,1 43 13,1 7.2 27,3 1,6 0.75 0.87 19 22 60 414 4,1 35 10,7 4.3 16,3 1,0 0.68 0.78 17 20 30 207 2,1 40 12,2 6.0 22,7 1,4 0.72 0.83 18 21 40 276 2,8 41 12,5 6.8 25,7 1,5 0.78 0.90 20 23 60003 RPS Select Rotor 50 345 3,4 42 12,8 7.5 28,4 1,7 0.82 0.95 21 24 60003-SH RPS Select Rotor, shrub head 60 414 4,1 44 13,4 8.4 31,8 1,9 0.84 0.96 21 24 K-RAIN MANUFACTURING CORP. 30 207 2,1 38 11,6 7.9 29,9 1,8 1.05 1.22 27 31 60003-6INCH RPS Select Rotor, 6" riser1640 Australian Avenue, Riviera Beach, FL 33404 USA 40 276 2,8 44 13,4 9.2 34,8 2,1 0.92 1.06 23 27 Other options add to part number: PH: 561.844.1002 1.800.735.7246 FAX: 561.842.9493 50 345 3,4 45 13,7 10.4 39,4 2,4 0.99 1.14 25 29
WES-TECH SUPER PRO ROTOR
WSPR
WES-TECH SHRUB ROTOR
WSPSR
Models
60
414
4,1
46 14,0
11.1 42,0 2,5
1.01
1.17
26
30
-CV
Check Valve
*All precipitation rates calculated for 180° operation. For the precipitation rate for a 360° sprinkler, divide by 2.
RPS SELECT
Performance Data NOZZLE #1.0
#2.0
#3.0
#4.0
PRESSURE
RADIUS
© K-RAIN Manufacturing Corp.
How to Specify:
The RPS Select offers pre-installed nozzle convenience with greater water efficiency.
www.krain.com
Model Number Description 60003 -CV
FLOW RATE
PSI
kPa
Bars
Ft.
M.
GPM
L/M
M3/H
30 35 40 45 50 30 35 40 45 50 30 35 40 45 50 30 35 40 45 50
207 241 276 310 345 207 241 276 310 345 207 241 276 310 345 207 241 276 310 345
2.1 2.4 2.8 3.1 3.4 2.1 2.4 2.8 3.1 3.4 2.1 2.4 2.8 3.1 3.4 2.1 2.4 2.8 3.1 3.4
33' 34' 37' 37' 37' 37' 38' 39' 40' 40' 37' 40' 41' 41' 43' 38' 40' 44' 45' 46'
10.1 10.4 10.4 11.3 11.3 11.3 11.6 11.9 12.2 12.2 11.3 12.2 12.2 12.5 13.1 11.6 12.2 13.4 13.7 14.0
1.3 1.4 1.5 1.6 1.8 2.6 2.8 3.0 3.2 3.6 3.8 4.1 4.5 4.7 4.9 5.2 5.7 6.0 6.4 6.8
4.9 5.3 5.7 6.1 6.8 9.8 10.6 11.4 12.1 13.6 14.4 15.5 17.0 17.8 18.5 19.6 21.5 22.7 24.2 25.7
0.29 0.32 0.34 0.37 0.41 0.59 0.64 0.68 0.73 0.82 0.86 0.93 1.02 1.07 1.11 1.18 1.29 1.36 1.45 1.54
PRECIP in/hr PRECIP mm/hr n
s
n
s
.23 .23 .21 .22 .25 .37 .37 .38 .39 .43 .53 .49 .52 .54 .51 .69 .69 .60 .61 .62
.24 .27 .29 .26 .29 .42 .43 .44 .44 .50 .62 .57 .60 .62 .59 .80 .79 .69 .70 .71
6 6 6 6 6 9 9 10 10 11 14 13 13 14 13 18 17 15 15 16
7 7 7 7 7 11 11 11 11 13 16 14 15 16 15 20 20 17 18 18
The K-Rain RPS® Select rotary sprinkler is the first gear-driven sprinkler that makes matched precipitation fast and easy, without the need to change nozzles in the field. It offers a choice of 4 selectable built-in nozzles. With a twist of a flathead screwdriver, quickly select the correct nozzle to match the arc setting of the sprinkler or landscape.
*All precipitation rates calculated for 180° operation. For the precipitation rate for a 360° sprinkler, divide by 2.
RPS SELECT ROTOR
11005112 REV17
RPS-SELECT
© K-Rain Manufacturing Corporation AN ISO 9001 CERTIFIED COMPANY
70011110 Rev. 03
s
55
TORO MINI 8 Nozzle Pressure (Gallons) (PSI)
4” TORO MINI 8
Flow (GPM)
Radius (Feet)
Pressure (kPa)
Flow (L/M)
Flow (M3/H)
Radius (Meters)
0.75
30 40 50
0.8 0.9 1.2
19 20 21
207 276 345
3.03 3.41 4.54
0.2 0.2 0.3
5.8 6.1 6.4
1.0
30 40 50
1.1 1.3 1.2
22 23 24
207 276 345
4.16 4.92 5.68
0.2 0.3 0.3
6.7 7.0 7.3
1.5
30 40 50
1.2 1.4 1.6
26 28 30
207 276 345
4.54 5.30 6.06
0.3 0.3 04
7.9 8.5 9.1
2.0
30 40 50
1.4 1.7 2.0
30 31 32
207 276 345
5.30 6.43 7.57
0.3 0.4 0.5
9.1 9.4 9.8
3.0
30 40 50
2.3 2.6 3.0
33 34 35
207 276 345
8.71 9.84 11.36
0.5 0.6 0.7
10.1 10.4 10.7
MINI8-4P
TORO T5 GEAR ROTOR T-5 Nozzle Performance Datal
T5 POPUP ROTOR
T5P
Nozzle
T5 SHRUB ROTOR
T5S
1.5
T5 12" POPUP ROTOR
T5HP
2.0 2.5
• 5” Pop-up • Standard
rubber cover • Optional check-valve • Top adjust arc set • Part and full circle in one sprinkler
56
3.0
T-5 Low Angle Nozzle Performance Datal Nozzle
1.5LA 2.0LA 2.5LA 3.0LA
psi
Radius
GPM
25 35 45 25 35 45 25 35 45 25 35 45
25 28 29 27 30 31 29 31 32 29 33 35
0.76 0.92 1.05 1.15 1.38 2.58 1.47 1.77 2.02 2.23 2.68 3.07
Precipitation Rate (in/hr) ■ (in/hr)▲
0.23 0.23 0.24 0.30 0.30 0.32 0.34 0.35 0.38 0.51 0.47 0.48
0.27 0.26 0.28 0.35 0.34 0.37 0.39 0.41 0.44 0.59 0.55 0.56
4.0 5.0 6.0 8.0
psi
Radius
GPM
Precipitation Rate (in/hr) ■ (in/hr)▲
25 35 45 25 35 45 25 35 45 25 35
33 34 35 35 36 37 35 36 37 36 38
1.12 1.35 1.54 1.50 1.81 2.07 1.81 2.26 2.51 2.26 2.71
0.20 0.22 0.24 0.24 0.27 0.29 0.28 0.34 0.35 0.34 0.36
0.23 0.26 0.28 0.27 0.31 0.34 0.33 0.39 0.41 0.39 0.42
45
40
3.09
0.37
0.43
25 35 45 25 35 45 25 35 45 25 35 45
37 40 42 39 41 43 39 43 44 36 43 50
2.91 3.50 4.01 3.72 4.47 5.09 4.25 5.23 6.01 5.90° 7.06 8.03
0.41 0.42 0.44 0.47 0.51 0.53 0.54 0.54 0.60 0.88 0.74 0.62
0.47 0.49 0.51 0.54 0.59 0.61 0.62 0.63 0.69 1.01 0.85 0.71
TORO 640 GEAR ROTOR
Nozzle
40 41
42
43
44
MOTOR (xxx=ARC)
640-0xxx
NOZZLE AND STATOR
640-xx
VALVE IN HEAD BODY
640-10
CHECK-O-MATIC BODY
640-20
psi
GPM Radius
148°
60 70 80 90° 60 70 80 90° 60 70 80 90° 60 70 80 90° 60 70 80 90°
7.3 8.0 8.6 9.2 11.0 11.9 12.7 13.4 14.0 14.7 15.8 16.8 15.7 17.0 18.3 19.4 19.9 21.9 23.4 25.0
▲ 0.73 0.77 0.80 0.82 1.02 1.06 1.09 1.11 1.21 1.22 1.27 1.35 1.22 1.23 1.25 1.28 1.45 1.49 1.50 1.50
52 53 54 55 54 55 56 57 56 57 58 58 59 61 63 64 61 63 65 67
108°
127° ■ 0.63 0.67 0.69 0.71 0.88 0.92 0.95 0.97 1.05 1.06 1.10 1.17 1.06 1.07 1.08 1.11 1.25 1.29 1.30 1.30
▲ 0.85 0.90° 0.93 0.96 1.19 1.24 1.27 1.30 1.40 1.42 1.48 1.57 1.42 1.44 1.45 1.49 1.68 1.74 1.74 1.75
■ 0.74 0.78 0.80 0.83 1.03 1.07 1.10 1.12 1.22 1.23 1.28 1.36 1.23 1.25 1.25 1.29 1.46 1.53 1.51 1.52
▲ 1.00 1.05 1.09 1.13 1.40 1.46 1.50 1.53 1.65 1.68 1.74 1.85 1.67 1.69 1.71 1.75 1.98 2.04 2.05 2.06
Considered the most durable, heavy-duty commercial sprinkler available, the Toro® 640 Series is the proven veteran for athletic fields, parks, campuses and commercial sites.
90°° ■ 0.75 0.91 0.95 0.98 1.21 1.26 1.30 1.32 1.43 1.445 1.51 1.60 1.45 1.47 1.48 1.52 1.71 1.84 1.78 1.79
▲ 1.20 1.27 1.31 1.35 1.68 1.75 1.80 1.83 1.99 2.01 2.09 2.22 2.01 2.03 2.05 2.11 2.38 2.45 2.46 2.48
60° ■ 1.04 1.10 1.14 1.17 1.45 1.52 1.56 1.59 1.72 1.74 1.81 1.92 1.74 1.76 1.78 1.82 2.06 2.76 2.13 2.15
▲ 1.80 1.90° 1.97 2.03 2.52 2.62 2.70 2.75 2.98 3.02 3.13 3.33 3.01 3.05 3.08 3.16 3.57 3.68 3.70 3.72
45° ■ 1.56 1.65 1.70 1.76 2.18 2.27 2.34 2.38 2.58 2.61 2.71 2.89 2.61 2.64 2.66 2.74 3.09 3.68 3.20 3.22
▲ 2.40 2.53 2.62 2.71 3.36 3.50 3.60 3.67 3.97 4.03 4.18 4.44 4.01 4.06 4.10 4.21 4.76 4.91 4.93 4.95
■ 2.08 2.19 2.27 2.34 2.91 3.03 3.12 3.18 3.44 3.49 3.62 3.85 3.47 3.52 3.55 3.65 4.12 4.25 4.27 4.29
640 Series Performance Datal Nozw
40 41 42 43 44
psi 60 70 80 90° 60 70 80 90° 60 70 80 90° 60 70 80 90° 60 70 80 90°
GPM Radius
360°
7.3 8.0 8.6 9.2 11.0 11.9 12.7 13.4 14.0 14.7 15.8 16.8 15.7 17.0 18.3 19.4 19.9 21.9 23.4 25.0
▲ 0.30 0.32 0.33 0.34 0.42 0.44 0.45 0.46 0.50 0.50 0.52 0.56 0.50 0.51 0.51 0.53 0.59 0.61 0.62 0.62
52 53 54 55 54 55 56 57 56 57 58 58 59 61 63 64 61 63 65 67
270° ■ 0.26 0.27 0.28 0.29 0.36 0.38 0.39 0.40 0.43 0.44 0.45 0.48 0.43 0.44 0.44 0.46 0.52 0.53 0.53 0.54
▲ 0.40 0.42 0.44 0.45 0.56 0.58 0.60 0.61 0.66 0.67 0.69 0.74 0.67 0.68 0.68 0.70 0.79 0.82 0.82 0.82
238° ■ 0.35 0.36 0.38 0.39 0.48 0.50 0.52 0.53 0.57 0.58 0.60 0.64 0.58 0.59 0.59 0.61 0.68 0.71 0.71 0.71
▲ 0.45 0.48 0.50 0.51 0.63 0.66 0.68 0.69 0.75 0.76 0.79 0.84 0.76 0.77 0.77 0.80 0.90° 0.93 0.93 0.94
192° ■ 0.39 0.41 0.43 0.44 0.55 0.57 0.59 0.60 0.65 0.66 0.68 0.73 0.66 0.67 0.67 0.69 0.78 0.80 0.81 0.81
▲ 0.56 0.60 0.62 0.64 0.79 0.82 0.85 0.86 0.93 0.95 0.98 1.04 0.94 0.96 0.96 0.99 1.12 1.15 1.16 1.16
173°
180° ■ 0.49 0.52 0.53 0.55 0.68 0.71 0.73 0.74 0.81 0.82 0.85 0.90° 0.82 0.83 0.83 0.86 0.97 1.00 1.00 1.01
▲ 0.60 0.63 0.66 0.68 0.84 0.87 0.90° 0.92 0.99 1.01 1.04 1.11 1.00 1.02 1.03 1.05 1.19 1.23 1.23 1.24
■ 0.52 0.55 0.57 0.59 0.73 0.76 0.78 0.79 0.86 0.87 0.90° 0.96 0.87 0.88 0.89 0.91 1.03 1.06 1.07 1.07
▲ 0.62 0.66 0.68 0.70 0.87 0.91 0.94 0.95 1.03 1.05 1.09 1.16 1.04 1.06 1.07 1.10 1.24 1.28 1.28 1.29
■ 0.54 0.57 0.59 0.61 0.76 0.79 0.81 0.83 0.89 0.91 0.94 1.00 0.83 0.92 0.92 0.95 1.07 1.11 1.11 1.12
57
POP UP HEADS HEADS NOZZLES
1. 2.
Experience the convenience of sprinklers that emerge from the ground when water flow is detected. Pop-up sprinklers enhance the lushness and vitality of your lawn without the need for the equipment to be permanently on display.
HYDRO RAIN HRS100 & 200 SPRAY HEAD
HRS 200
In a world of heavy, abusive lawn equipment, only the tough survive. That’s why Hydro-Rain® set out to create the most rugged, durable spray head on the market—a head with1800 a “bring it on” attitude ™ Series Spray Heads and a Leading Spray Heads bodyIndustry’s that can take whatever you throw at it.30 years, The is that Trusted for over 1800HRS Series Spray 200 Dimensions/Models Tech Spec Heads have provided unmatched durability, • ½” (15/21) NPT female threaded inlet reliability, and performance. spray head. • Models and height: Superior components and features make the 1800 Series Spray Head the spray head of choice for a wide variety of applications.
Series SprayFeatures Heads
s Leading Spray Heads Co-molded, pressure-activated, multi-func-
tional wiper seal assures positive seal without excess “flow-by” which enables more heads r 30 years, 1800 Series Spray Dimensions/Models to be installed on the same valve. ovided unmatched durability, • ½” (15/21) NPT female threaded inlet
performance.
• Designed for use all Rain Bird plastic • Models andwith height: nozzles – Rotary onents and features make thespray head 1802: 4” (10 cm) body Nozzles, height; VAN and XPCN ay Head the spray head of U-Series,2”MPR, pop-up height (5 cm) Series. controlled at pop-down de variety of applications. • Precision 1803: 47⁄8” (12 flush cm) body height; clears debris fromheight unit, assuring 3” pop-up (7.6 cm) positive 1804: 6” (15 cm) body height; stem retraction in all soil types. 4” pop-upsteel height (10 cm) • Strong stainless spring provides essure-activated, multi-func- reliable1806: 9 3⁄8” (24 cm) body height; stem retraction. al assures positive seal without pop-up height (15models cm) allows • Ratchet6” mechanism on all ” which enables more heads 1812: 16” (40 cm) body easy nozzle pattern alignmentheight; without on the same valve. 12” pop-up height (30 cm) tools. • Exposed surface diameter: 21⁄4” (5.7 cm) use with all Rain Bird plastic• Pre-installed 1800 Pop-Top™ flush plug ozzles – Rotary Nozzles, blocks debris from entering after flushing. R, VAN and XPCN Series. Allows for easy nozzle installation. trolled flush at pop-down • Constructed of time-proven UV-resistant from unit, assuring positive How To Specify plastic and corrosion resistant stainless on in all soil types. steel parts, assuring long product life. ess steel spring provides • All sprinkler components removable 1804 - SAM - are PRS - P45 retraction. hanism on all models allows from the top without special tools, Optional Feature providing for quick and easy flushing and attern alignment without PRS: 30psi (2.1 bar) in-stem maintenance of the sprinkler. pressure regulation 1800 Pop-Top™ flush plug • Side inlets featured on 1806, Optional P45:1806PRS, 45psi (3.1 bar) in-stem Feature from entering after flushing. 1812, and 1812PRS modelspressure only. regulation SAM: sy nozzle installation. • Five-year trade warranty. Seal-A-Matic™
4"
BODY SLIMsurvive. That’s why Hydro-Rain HRS-150-04 set out to create the most
4"
BODY
6"
BODY
12"
In a world of heavy, abusive lawn equipment, only the tough ®
Tech Spec
BODY
rugged, durable spray head on the market—a head with a “bring it on” attitude and a body that can take whatever you throw at it. The HRS 200 is that spray head.
HRS200-04 HRS200-06
Hands down, it’s the heaviest-duty product of its kind. The facts speak for themselves: the wide cap is made with almost 50% more material than the nearest competitor; the wiper seal is the industry’s largest; the body is made of ultra-strong ABS 709…and that’s just the beginning. Top to bottom, inside and out, this head sets a new standard for long-lasting reliability under even the harshest conditions and most punishing treatment—that means fewer call-backs and fewer replacements.
HRS200-12
4"
BODY PR/CV
HRS200-04-PC
4"
BODY BLU-LOCK
HRS200-04-FB
And now the HRS 200 lineup is greener than ever. The new PRHS stem—a pressure regulator and check-valve— dramatically reduces water waste and increases efficiency by preventing nozzle misting and overspray, and eliminating low-head drain at the end of each watering cycle.
1802: 4” (10 cm) body height; 2” pop-up height (5 cm) 1803: 47⁄8” (12 cm) body height; 3” pop-up height (7.6 cm) 1804: 6” (15 cm) body height; 4” pop-up height (10 cm) 1806: 9 3⁄8” (24 cm) body height; 6” pop-up height (15 cm) 1812: 16” (40 cm) body height; 12” pop-up height (30 cm) • Exposed surface diameter: 21⁄4” (5.7 cm)
MODELS
SkU
DESCRIPTION
HRS-200-04-FC
03012
4" Commercial Spray Head w/ Flush Cap
HRS-200-04-FB
03015
4" Commercial Spray Head w/ Flush Cap & ½ BL Ell
BUILT FOR SPEED ADVANTAGES
HRS-200-04-PC
03001
4" Commercial Spray Head w/ Flush Cap & PRHS
• Blu-Lock® Enabled—Factory-installed Blu-Lock® elbows nozzles, available on select models, are ready to install on Blu-Lock® swing pipe out of the box.
HRS-200-04-PB
03004
4" Commercial Spray Head w/ Flush Cap & PRHS & BL Ell
HRS-200-06-FC
03013
6" Commercial Spray Head w/ Flush Cap
HRS-200-12-FC
03014
12" Commercial Spray Head w/ Flush Cap
• Cat-track Grip Body Cap—Unique rib design and contour of cap promotes superior ergonomics for faster installation and quicker maintenance.
HOW TO SPECIFY
• Pre-Installed Hydro-Rain® Flush Cap—Pull-tab “quick rip” design makes nozzle installation trouble-free. Just pull the tab, rip it off the stem and install the filter and nozzle.
HRS 200 04 FC
MODEL
SIzE
OPT. FEATURES
HRS 200
4"
Flush Cap
RAIN BIRD 1800™ SERIES SPRAY HEAD POPUP BODY
of time-proven UV-resistant check valve Model orrosion resistant stainless Operating 1804: Range 4” (10.2 cm) pop-up height ssuring long product life. feature with P45m) models 2.5 SAM to 24 feetincluded (0.8 to 7.3 components are removable• Spacing:Note: without special tools, • Pressure: 15 to 70 psi (1.0 to 4.8 bar) quick and easy flushing and How To Specify of the sprinkler. Specifications atured on 1806, 1806PRS, • Flow-by:1804 0 at 8 psi (0.6 bar) or greater; - SAM-P45 - R13-18Q 12PRS models only. 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise de warranty.
Range
2"
1802
4"
1804R/MX Nozzle Rotary Nozzle
6"
1806
12"
1812
o 24 feet (0.8 to 7.3 m) o 70 psi (1.0 to 4.8 bar)
ns
THE FUTURE OF IRRIGATION
8 psi (0.6 bar) or greater; 2 m3/h; 0.006 l/s) otherwise
Optional Feature SAM: Seal-A-Matic™ check valve
P45: 45psi (3.1 bar) in-stem pressure regulation
Radius Range 13-18’ (4.0 – 5.5,m) 17-24’ (5.2 – 7.3m) Pattern F: Full (360°) TQ: Three Quarter (270°) TT: Two Third (240°) H: Half (180°) T: Third (120°) Q: Quarter (90°)
How To Specify
BUILT FOR GREEN ADVANTAGES
1804 - SAM - PRS - P45
Optional P45: 45psi (3.1 bar) in-stem Feature pressure regulation SAM: Seal-A-Matic™ check valve
POPUP BODY SAM
POPUP BODY SAM + PRS
PRS
SAM
Model 1804: 4” (10.2 cm) pop-up height
Note: SAM feature included with P45 models
How To Specify
1804 - SAM-P45 - R13-18Q
Optional Feature SAM: Seal-A-Matic™ check valve P45: 45psi (3.1 bar) in-stem pressure regulation
Radius Range 13-18’ (4.0 – 5.5,m) SAM 17-24’ (5.2 – 7.3m) Pattern F: Full (360°) TQ: Three Quarter (270°) TT: Two Third (240°) H: Half (180°) T: Third (120°) Q: Quarter (90°)
1804SAM
Model 1804: 4” (10.2 cm) pop-up height
58
• Instant “To Green” Conversion—HRS-200-04-BL allows for an instant transition to Blu-Lock’s “Built for Green” pipe and fittings system. There is no need for toxic solvents or PVC.
• Pressure Regulated Stem—PRHS models provide 30 PSI (2 BAR) to the nozzle, effectively preventing water
wasting misting caused by unregulated high BODY pressure. POPUP BODY POPUP • Hydro-seal Prevents Run Off—PRHS models are equipped with a factory-installed SAMP45 check valve that PRS prevents low head drainage.
PRS MODEL Regulates nozzle pres• Co-molded TPR, Pressure Activated Wiper Seal— sure to an average 30 Effectively reduces water waste by minimizing flow-by at system start-up. psi (2.1 bar) with inlet pressures toLake, 70UT 84054 psi HYDRO-RAIN (ph) 888-HYDRORAIN (fx) 801.203.1179 www.hydrorain.com 915 Overland of Street,up North Salt (4.8 bar) ®
Nozzle Rotary Nozzle
1804SAMPRS
u
dimensions:
Printers are
flat: w: 8.5" h: 11"
responsible for
finished: w: 8.5" h: 11"
des: ME
colors
1804SAMP45 client: Hydro-Rain
1812SAM
1812SAMPRS
1812PRS
SAM-PRS-P45
4
date: 09-19-2012
1804PRS 1806PRS
SAM-PRS-P45
u
proof no:
1806SAMPRS
Note: Specify sprinkler bodies and nozzles separately.
u
SAM-PRS
1806SAM SAM-PRS
Model 1804: 4” (10.2 cm) pop-up height Note: Specify sprinkler bodies and nozzles separately.
PRS
Optional Feature PRS: 30psi (2.1 bar) in-stem pressure regulation
sku: 03010
www.fluid-studio.net
1812SAMP45
1065 South 500 West Bountiful, Utah 84010
software: InDesign CS5
p 801 295 9820 f 801 951 5815
production requirements.
Registration
color non printing
CMYK
PMS 2955
PMS ???
upc: N/A
file name: 03010-36 rE.indd
meeting print
color non printing
additional instructions: · ·
Any changes must be approved
SAM MODEL Built-in Seal-A-Matic™ (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site. PMS ????
by the client and Fluid Studio.
Printed piece must meet
designated
specifications on this form.
RAIN BIRD 1800™ ACCESSORIES 1
6" EXTENSION
1800EXT
2
½" POPUP ADAPTER
PA80
3
MICRO SPRAY HEAD ADAPTER
XBA1800
1
2
3
TORO 570 CLASSIC SPRAY HEAD POPUP BODY
POPUP BODY SIDE INLET
2"
570Z-2P
3"
570Z-3P
4"
570Z-4P
6"
570Z-6P
570Z-6PSI
12"
570Z-12P
570Z-12PSI
No Flushing on Pop-Up! Starting up a system is a critical time when water waste can occur – but not on a 570Z Series spray head. With a pressure-activated wiper seal that flushes only upon retraction, flow-by is eliminated on pop-up reducing water waste. This zero-flush seal is what makes the 570Z Series a spray head for those serious about effective water management.
59
TORO 570 X-FLOW WITH CHECK VALVE X-Flow technology shuts off water waste with the 570ZXF, Toro takes water management another step further. A missing or damaged spray head nozzle can let excessive amounts of water escape per minute. The patented X-Flow technology is a shut-off device built right into the sprinkler. When accidents or vandalism occur the 570ZXF is there to back you up.
SHRUB ADAPTER x-FLOW
570Z-SHRUBxF
4"
POPUP BODY x-FLOW
570Z-4PxF
4"
POPUP BODY x-FLOW COM
570Z-4PxFCOM
6"
POPUP BODY x-FLOW COM
570Z-6PxFCOM
12"
POPUP BODY x-FLOW COM
570Z-12PxFCOM
TORO 570 X-FLOW PR + CHECK Built-in pressure regulation adds reliability The built-in pressure regulator on the 570ZPRX maintains constant pressure working well in situations where water pressures are variable and misting or fogging may be a problem. From first to last head, the 570ZPRX provides steady pressure in situations that require additional control. This is not an add-on or regulating disc, rather true pressure regulation where you need it most – built right in. 4"
POPUP BODY
570Z-4PPRxCOM
12"
POPUP BODY
570Z-12PPRxCOM
IRRITROL I-PRO SERIES SPRAY HEADS Irritrol’s new I-PRO Series spray heads combine a pressure-activated wiper seal and advanced formula lubricant that virtually eliminates troublesome stick ups. Pre-installed check valve prevents low-head drainage, eliminating flood or erosion damage by keeping water in lateral pipes in elevation changes up to 13’. POPUP SPRAY
POPUP WITH CHECKVALVE
POPUP WITH CHECKVALVE + PR
3"
I-PRO300
4"
I-PRO400-CV
4"
I-PRO400-PR-CV
4"
I-PRO400
6"
I-PPRO600-CV
6"
I-PRO600-PR-CV
6"
I-PPRO600
12"
I-PRO1200-SI-CV
12" SIDE INLET
I-PRO1200-SI-PR-CV
6" SIDE INLET
I-PRO600-SI
Check valve
IP-CV
12" SIDE INLET
I-PRO1200-SI
60
8’ - 14’
13’ - 18’
17’ - 24’
45°- 270°
RBR-VAN-14-270
RBR-VAN-18-270
RBR-VAN-24-270
Left Corner Strip
RBR-VAN-LCS
360°
-
RBR-VAN-18-360 RBR-VAN-24-360
Right Corner Strip
RBR-VAN-RCS
Side Corner Strip
RBR-VAN-SST
5' x 15'
8 Series MPR
5 Se
10° Trajectory Nozzle
5° Tra Noz
8F
Spray Nozzles
Flow Precip Precip gpm In/h In/h 0.86 2.30 2.66 0.96 1.89 2.18 1.05 1.58 1.82 0.37 2.85RB-5Q 3.29 90° 180° RB-5H 0.52 1.56 1.81 360° 0.18 2.77RB-5F 3.20 0.21 2.25 2.59 0.26 1.56 1.81
ressure psi 5 0 0 5 0 5 0 5 0 5 0
Radius ft. 7 8 10 7 8 9 10 7 8 9 10
Q V Flow Precip 10' Precip gpm In/h NOZZLE In/h 1.16 2.28 2.63 1.30 1.96 2.26 1.58 1.52 1.75 0.58 2.28 2.63 0.65 1.96 2.26 0.72 1.71RB-10Q 1.98 90° 0.79 1.52 1.75 0.29 2.28RB-10H 2.63 180° 0.33 1.96 2.26 0.36 1.71RB-10F 1.98 360° 0.39 1.52 1.75
ressure psi
Radius ft.
Flow gpm
Q Precip In/h
V Precip In/h
5 Series MPR Trajectory 8 Series MPR 5° Nozzle 10° Trajectory 5F Nozzle 8F 5H 8H 5Q 8Q
Pressure psi 15 Pressure psi 20 25 30 15 30 15 20 15 Series MPR 30
Radius ft. 3 Radius ft. 6 7 8 5 8 5 6 8
Flow gpm 0.29 Flow gpm 0.86 0.96 1.05 0.37 0.52 0.18 0.21 0.26
Q V Precip Precip In/h In/h Q V 3.10 3.58 Precip Precip In/h In/h 2.66 2.30 1.89 2.18 1.82 1.58 2.85 3.29 1.56 1.81 2.77 3.20 2.25 2.59 1.56 1.81
30° Trajectory 10 Series MPR Pressure Nozzle psi 15FTrajectory 15° 15 20 Nozzle Pressure psi 30 10F 15 15H 15 20 20 30 30 10H 15 15Q 15 20 20 25 30 30 10Q 15 20 25 30
Radius ft. 11 12 Radius ft. 715 811 12 10 715 811 912 10 715 8 9 10
Flow gpm 2.60 3.00 Flow gpm 3.70 1.16 1.30 1.50 1.58 1.85 0.58 0.65 0.65 0.75 0.72 0.79 0.92 0.29 0.33 0.36 0.39
Q Precip In/h 2.07 Q 2.01 Precip In/h 1.58 2.28 2.07 1.96 2.01 1.52 1.58 2.28 2.07 1.96 2.01 1.71 1.52 1.58 2.28 1.96 1.71 1.52
V Precip In/h 2.39 V 2.32 Precip In/h 1.83 2.63 2.39 2.26 2.32 1.75 1.83 2.63 2.39 2.26 2.32 1.98 1.75 1.83 2.63 2.26 1.98 1.75
12 Series MPR 30° Trajectory Nozzle 12F
Pressure psi
Radius ft.
Flow gpm
Q Precip In/h
V Precip In/h
8' NOZZLE 5 Series MPR
8H
8Q
8 Series MPR
Pressure Radius psi ft. 20 6 25 7 30 8 15 5 Spray Nozzles MPR Nozzles 30 8 15 5 20 6 30 8
Trajectory 10° 10 Series MPR Nozzle Pressure Radius 5° Trajectory psi ft. Trajectory V 15° Q 8F Nozzle Pressure Nozzle Radius Flow Precip Precip Pressure Radius 6ft. psi ft. gpm 20 In/h psiIn/h 77 5F 15 3 0.29 25 3.58 10F 153.10 88 30 20 5 15 8H 90° RB-8Q 30 10 10H 180° RB-8H 15 7 5H 8 20 30 360° RB-8F 8Q 59 25 15 30 610 20 15 7 10Q 5Q 20 8 30 9 25 10 30 10 Series MPR Spray Nozzles
Radius ft. 6 7 8 5 8 5 6 8
5' NOZZLE Q V
Spray Nozzles
RAIN BIRD MPR SERIES NOZZLES MPR Nozzles
Spray Nozzles
ressure psi 0 5 0 5 0 5 0 0
R-VAN SERIES ROTARY NOZZLES
Flow gpm 0.86 0.96 1.05 0.37 0.52 0.18 0.21 0.26
Q Precip In/h 2.30 1.89 1.58 2.85 1.56 2.77 2.25 1.56
Flow gpm Flow 0.86 gpm 0.96 1.16 1.05 1.30 0.37 1.58 0.58 0.52 0.65 0.18 0.72 0.79 0.21 0.29 0.33 0.26
Q V Precip Precip In/h In/h Q V Precip Precip 2.30 2.66 In/h In/h 1.89 2.18 2.28 2.63 1.58 1.82 1.96 2.26 2.85 3.29 1.52 1.75 2.28 2.63 1.56 1.81 1.96 2.26 2.77 3.20 1.71 1.98 1.52 1.75 2.25 2.59 2.28 2.63 1.96 2.26 1.56 1.81
0.36 0.39
12 Series MPR 15 Series MPR 12' 15° Trajectory Nozzle Pressure Radius Flow 30° 30° Trajectory NOZZLE Trajectory Vft. psiQ gpm Nozzle Flow Pressure Radius Flow Nozzle Pressure Radius Precip Precip 10F 15 7 1.16 psi ft. gpm psi ft. gpm 20In/h In/h 8 1.30 12F 15F 15 2.60 2.07 2.39 11 20 3.00 30 2.32 10 1.58 12 2.01 10H 15 7 0.58 30 15 3.70 1.58 1.83 12H 20 8 0.65 90° RB-12Q 15H 15 11 1.30 2.07 2.39 25 9 0.72 20 12 1.50 30 2.32 252.01 11 1.20 10 0.79 180° RB-12H 10Q 15 7 0.29 12Q 1.58 30 15 1.85 20 1.83 360° RB-12F 8 0.33 11 2.07 15Q 15 0.65 25 2.39 9 0.36 252.01 11 0.60 20 12 0.75 30 2.32 10 0.39 Note: on 4" (10.21.83 cm) pop-ups 30 15 All MPR nozzles 0.92 tested1.58 Q Square spacing based on 50% diameter of throw 12 Series spacing MPR based on 50% diameter of throw V Triangular
30° Trajectory 18 Nozzle 12F
Pressure psi
Radius ft.
Flow gpm
1.71 1.52
V Precip In/h 2.66 2.18 1.82 3.29 1.81 3.20 2.59 1.81
1.98 1.75
Q V Precip Precip Q V In/h In/h Precip Precip 2.28 2.63 In/h In/h 1.96 2.26 1.52 1.75 2.63 2.28 2.26 1.96 1.98 1.71 1.91 2.21 1.52 1.75 2.28 2.63 1.96 2.26 1.71 1.98 1.91 2.21 1.52 1.75
5F 5H 5Q 5 Se
5°15TraS Nozz
30° T 5F Nozz
15F 5H 15H 5Q 15Q
15 Se
30° Tr Nozz 15F
15H
15Q
Perform Note: S Note: R
Q Precip In/h
V Precip In/h
61
0.21 0.26
adius .
0
0
0
2.25 1.56
2.59 1.81
15' Q NOZZLE V
Flow Precip Precip gpm In/h In/h 1.16 2.28 2.63 1.30 1.96 2.26 1.58 1.52 1.75 0.58 2.28 2.63 0.65 1.96 2.26 0.72 1.71RB-15Q 1.98 90° 0.79 1.52 1.75 0.29 2.63 180°2.28RB-15H 0.33 1.96 2.26 0.36 1.71 1.98 360° RB-15F 0.39 1.52 1.75
15F
15H
15Q
Pressure psi 15 20 30 15 20 30 15 20 30
Radius ft. 11 12 15 11 12 15 11 12 15
Flow gpm 2.60 3.00 3.70 1.30 1.50 1.85 0.65 0.75 0.92
4 Series VAN
4 Series VAN
adius .
0° Trajectory Nozzle Q
Flow 330° Arc gpm 4' 270° Arc 6' 8' 180° Arc 1.20 10' 90° Arc 12' 0.60 15'
8 Series HE-VAN
15 Series MPR 30° Trajectory Nozzle
ADJUST- 4 Series VAN 8 Series VAN 0° Trajectory Pressure Radius Flow Precip Precip ABLE 0° Trajectory Nozzle 5° Trajectory Flow Nozzle Nozzle Pressure Precip Radius Q V psi ft. Precip gpm In/hQ In/hV V NOZZLE Pressure Radius Flow Precip psi Precip 330°Nozzle ft. gpm In/h In/h Arc 15 Pressure 3 Radius 0.62Flow 7.23Precip8.35Precip
Precip psi Precipft. In/h 15 In/h 3 20 3 25 RB-4VAN 44 30 15 3 RB-6VAN 20 3 25 4 30 4 RB-8VAN 15 3 1.91 20 2.21 3 RB-10VAN 25 4 30 4 15 3 RB-12VAN 1.91 20 2.21 3 25 4 RB-15VAN 30 4
In/h 20 psi 15 3 0.62 330° Arc 8.35 25 15 20 3 0.70 9.43 30 20 25 4 0.80 6.06 270° Arc 15 25 30 4 0.88 6.67 20 30 270° 8.57 15 3 Arc 0.52 25 15 9.55 20 3 0.58 30 20 6.11 180° 4 Arc 15 25 25 0.66 6.77 20 30 30 4 Arc 0.73 180° 7.90 25 15 15 3 0.32 9.13 30 20 5.69 20 3 0.37 90° Arc 15 25 6.25 25 4 0.41 20 30 90° Arc 15 10.37 30 4 0.45 25 20 11.86 30 15 3 0.21 25 7.23 8 Series 20 3 HE-VAN0.2430 8.06 4 0.26 8 Series VAN Performance data taken25 in zero wind conditions 24° Trajectory separately. 818' Series VAN RB-18VAN Note: Specify spray body30and nozzles 4 VAN 0.29 6 Series
330°gpm Arc
In/h 7.23 8.17 5.25 5.78 7.42 8.27 5.29 5.86 6.84 7.91 4.93 5.41 8.98 10.27 6.26 6.98
12 Series HE-VAN
24° Trajectory 8 Series HE-VAN ADJ. HIGH Nozzle Pressure Radius Q V psi ft. 24° Trajectory Precip Precip EFFI 360° Arc 15 In/h In/h Nozzle Pressure 5Radius 20 6 CENCY psi ft. 2.07 2.39 25 75 15 2.01 2.32 NOZZLE 360° Arc 30 86 20 270° Arc 15 57 25 1.58 1.83 20 68 30 2.07 2.39 25 75 270° Arc 15 30 86 2.01 2.32 20 180° Arc 15 5 25 7 20 68 1.58 1.83 30 25 75 180° Arc 15 2.07 2.39 8' HEVAN-8 30 86 20 2.01 2.32 90° Arc 15 57 25 10' HEVAN-10 20 68 30 1.58 1.83 25 75 90° Arc 15 12' HEVAN-12 30 86 8 Series VAN 8 Series VAN 20 25 7 Trajectory 5° 30 Q 8 V Q 5° Trajectory V 15' HEVAN-15 Q V Q V
3 ft. 7.23 4 6 8.17 4 7 5.25 3 7 5.78 3 8 7.42 4 6 8.27 4 7 3 7 5.29 3 8 5.86 4 6 6.84 4 7 7.91 3 7 4.93 3 8 6 5.41 4 7 4 8.98 7 10.278 6.26 6.98
0.70gpm 8.17In/h 330° 9.43 ArcIn/h 8.35 0.801.21 5.253.53 6.064.07 9.43 1.36 2.91 0.88 5.78 6.673.36 6.06 0.521.55 7.423.32 8.573.83 6.67 1.70 2.79 0.58 8.27 9.553.22 270° 6.11 Arc4.55 8.57 0.661.11 5.293.95 9.55 0.731.24 5.863.24 6.773.74 1.41 3.69 0.32 6.84 7.904.25 6.11 0.371.55 7.913.10 9.133.58 6.77 0.84 4.49 5.18 0.41 4.93180° 5.69 Arc 7.90 0.450.97 5.413.81 6.254.40 4.94 9.13 0.211.09 8.984.28 10.37 3.58 11.86 4.13 5.69 0.241.19 10.27 0.51 5.46 6.29 6.25 0.26 6.26 7.23 0.59 4.64 5.35 0.29 6.9890° Arc 8.06 10.37 0.66 5.19 5.98 11.860.72 4.33 5.00 7.23 Q V 8.06
Nozzle
Pressure
Pressure
Radius
Flow
Precip Precip
Radius Flow Precip Precip In/h psi 10 Series ft. HE-VAN gpm In/h ft. gpm In/h In/h 4.07 15 6 1.21 3.53 7 1.36 2.91 15 620 27° Trajectory 1.21 3.53 4.07 3.36 10 Series 3.83 7 HE-VAN 1.55 3.32 20 725 Nozzle 1.36 2.91 3.36Radius Pressure2.79 8 1.70 3.22 25 730 27° Trajectory 1.55 3.32 3.83 psi 270° Arc 15 6 1.11 3.95 ft. 4.55 30 820 360° Arc 1.70 2.79 3.22 3.74 15 1.24 Nozzle7 Pressure3.24 7Radius 20 15 625 1.11 3.95 4.558ft. 4.25 7 1.41 3.69 psi 25 20 730 360° Arc 1.24 3.24 3.7497 3.58 8 1.55 3.10 15 30 180° 6 0.84 4.49 25Arc 715 1.41 3.69 4.2510 20 8 5.18 15 7 0.97 3.81 30 820 270° Arc 1.55 3.10 3.5879 4.40 25 25 7 1.09 4.28 20 8 30 15 6 0.84 4.49 5.1810 4.94 30 8 1.19 3.58 9 4.13 25 15 715 270° Arc 0.97 3.81 4.407 6.29 90°20 Arc 6 0.51 5.46 30 10 20 25 720 180° Arc 1.09 4.28 4.9478 5.35 7 0.59 4.64 15 25 30 825 1.19 3.58 4.1389 5.98 7 0.66 5.19 20 30 8 0.72 4.33 15 630 0.51 5.46 6.29910 5.00 25 180° Arc 15 7 7 0.59 4.64 5.3510 1220 Series HE-VAN 30 20 8 25 7 90° Arc0.66 5.19 5.98 15 7 25 9 Trajectory 23° Q V 20 8 30 8 0.72 4.33 5.00 10 Series VAN 30 10
Flow gpm 0.83 Flow 0.96 gpm 1.07 0.83 1.17 0.96 0.62 1.07 0.72 1.17 0.80 0.62 0.88 0.72 0.41 0.80 0.48 0.88 0.53 0.41 0.59 0.48 0.21 0.53 0.24 0.59 0.27 0.21 0.29 0.24 0.27 0.29
.95 82 .82 14 .14 06 .06 94 .94 82 .82 14 .14 06 .06 95 .95 82 .82 14 .14 06 .06 95 .95 82 .82
360° Arc
270° Arc 270° Arc
270° Arc
180° Arc 180° Arc
180° Arc
90° Arc 90° Arc
90° Arc
62
15 20 25 30 15 20 25 30 15 20 25 30 15 20 25 30
25 30 30 15 15 20 20 25 25 30 30 15 15 20 20 25 25 30 30 15 15 20 20 25 25 30 30
9 10 11 12 9 10 11 12 9 10 11 12 9 10 11 12
14 15 15 11 11 12 12 14 14 15 15 11 11 12 12 14 14 15 15 11 11 12 12 14 14 15 15
3.30 1.86 1.58 1.622.14 1.83 1.87 1.56 3.70 3.70 1.79 2.07 1.582.0625 1.83 2.39 1.86 1.95 30 1.95 2.07 2.39 2.25 2.01 2.32 2.12 1.68 1.95 2.25 1.58 1.62 2.011.82 1.87 2.32 2.36 2.48 2.48 1.86 1.58 1.622.14 1.83 1.87 1.17 2.78 2.78 1.58 1.30 2.07 2.39 1.39 1.79 2.06 1.83 1.30 1.68 2.01 2.071.94 2.32 2.39 1.59 1.50 1.50 1.58 1.62 2.011.82 1.87 2.32 1.77 1.65 1.65 1.86 1.58 1.622.14 1.83 1.87 0.78 1.85 1.85 1.79 2.07 1.582.06 2.39 1.83 0.93 0.65 0.65 2.07 0.75 2.01 2.32 1.06 1.68 1.95 2.39 0.75 2.01 0.82 1.62 1.87 1.18 1.58 1.82 2.32 0.82 1.62 1.87 0.39 0.92 1.86 1.58 2.14 1.83 0.92 1.58 1.83 0.46 1.79 2.06 0.53 1.68 1.95 0.59 1.58 1.82
360° Arc 270° 11 Arc
12
270° Arc 180° Arc
180° Arc 90° Arc
90° Arc
30 15
18 11
0.53 1.68 15 14 26° Trajectory 20 12 0.59 18 Series1.58 VAN 20 15 25 14 Nozzle 25 17 30 Trajectory15 26° 18 30 15 Arc 360° 15 Nozzle 20 20 25 25 360° 30 Arc 30 15 Arc 270° 15 20 20 25 25 270° 30 Arc 30 15 180° 20 Arc 25 30 Arc 180° 90° Arc
11 14 12 15 14 17 15 18 11 14 12 15 14 17 15 18 11
12 14 15
5.32
2.60 1.95 3.16
3.00 1.82 3.52 3.30 Pressure 3.65 psi 3.70 3.99 1.95 15 2.11 Pressure 2.25 20 2.35 psi 2.48 25 15 2.43 2.78 30 20 2.66 1.30 15 1.05 25 1.50 20 30 1.17 1.65 25 1.22 15 1.85 30 20 1.33 0.65 15 0.75 25 20 30 0.82 25 15 0.92 30 20 15 25
1.58 1.83 2.07 2.39 2.07 2.39 2.01 2.32 2.01 2.32 1.62 1.87 Radius Flow 1.62 1.87 1.58 1.83 ft. gpm 1.58 1.83 2.07 2.39 14 4.21 2.07 2.39 Radius Flow 2.01 2.32 15 4.70 ft. gpm 2.01 2.32 1.62 1.87 17 4.86 1.62 1.87 14 4.21 1.58 1.83 18 5.32 1.58 1.83 15 4.70 2.07 2.39 14 3.16 2.07 2.39 17 4.86 2.01 2.32 15 3.52 2.01 2.32 18 5.32 1.62 1.87 17 3.65 1.62 1.87 14 3.16 1.58 1.83 1.58 1.83 18 3.99 15 3.52 2.07 2.39
14 2.01 17 15 1.62 18 17 1.58 14 18 15 14 17
2.11 2.32 3.65 2.35 1.87 3.99 2.43 1.83 2.11
2.66 2.35 1.05 2.43
V Precip In/h V 3.68 Precip 2.95 In/h 2.42 3.68 2.03 2.95 3.68 2.42 2.95 2.03 2.42 3.68 2.03 2.95 3.68 2.42 2.95 2.03 2.42 3.68 2.03 2.95 3.68 2.42 2.95 2.03 2.42 3.68 2.03 2.95 2.42 2.03
25
Q 30 Precip In/h Q 2.07 Precip 2.01 In/h 1.62 2.07 1.58 2.01 2.07 1.62 2.01 1.58 1.62 2.07 1.58 2.01 2.07 1.62 2.01 1.58 1.62 2.07 1.58 2.01 2.07 1.62
14
V 15 Precip In/h V 2.39 Precip 2.32 In/h 1.87 2.39 1.83 2.32 2.39 1.87 2.32 1.83 1.87 2.39 1.83 2.32 2.39 1.87 2.32 1.83 1.87 2.39 1.83 2.32 2.39 1.87
0.82 0.92
1.62 1.58
1.87 1.83
23° Trajectory 12 Series HE-VAN Nozzle P p 23° Trajectory 360° Arc 1 Nozzle 2 2 360° Arc 3 270° Arc 1 2 2 270° Arc 3 180° Arc 1 2 2 180° Arc 3 90° Arc 1 2 2 90° Arc 3
15 Series HE-VAN
psiArc 330°
Flow gpm 1.26 Flow 1.46 gpm 1.63 1.26 1.78 1.46 0.95 1.63 1.09 1 1.78 1.22 0.95 1.34 1.09 0.63 1.22 0.73 1.34 1 0.81 0.63 0.89 0.73 0.32 m) pop-ups 0.81 r of throw 0.36 0.89 5° Trajectory Pressure Flow Precip Precip Nozzle Pressure Radius Flow Precip Precip 0.41 over the normal throw of the nozzle isRadius not recommended Note: Radius reduction Q V 25% ofNozzle Veter of throw 25 9 Arcft. HE-VAN 15 7 In/h 0.32 8 Series HE-VAN 5° Trajectory 12 Series 8 Trajectory Series VAN VANpsi VAN VAN Pressure ft. gpm In/h In/h psi 90° gpm In/h 10 10 Series 6 Series Trajectory Radius Flow Precip Precip Nozzle Q V Vrecip 4 Series 30 0.45 10° 15 1.67 Q 0° 15 0.83 Q V 20 360° Arc 5 3.19 3.68 360° Arc 9 1.99 8 V 2.30 0.36 psi n/h 0° Trajectory Nozzle Pressure ft. Radius gpm Flow In/h Precip In/h Precip 5° Precip Trajectory Nozzle Pressure Radius Flow Precip 24° TrajectoryRadius Nozzle Pressure Flow Precip Precip 23° Trajectory 0° Trajectory 25 9 Precip 20 6 0.96 2.56 2.95 20 10 1.93 1.86 2.15 0.41 Q V 15 6ft. Q V In/h V 4.07 In/h 10° Trajectory psi Arc n/h Q V 35 330° psi 1.21 gpmQ 3.53 Q V 8 Series HE-VAN 12 Series HE-VAN ™In/h psi ft. gpm In/h In/h ft. gpm In/h The Intelligent Use of Water. 10 Series VANPrecip Precip 25 Nozzle11 6 Series VAN Nozzle Pressure Flow Precip Precip 25 7 Radius 1.07Flow Radius 2.10Precip 2.42 Nozzle Pressure Radius Flow 30 0.45 2.16 1.72 10 1.99 Flow Nozzle PressureRadius Precip Nozzle Pressure Flow Nozzle Pressure Flow Precip Precip 330° Arc 15 6 1.21 Precip 3.53 Precip 4.07 20 7Radius 1.36 2.91 3.36 .35 43 Pressure 360° Arc 15 7 1.93 3.80 Radius 4.39 330° Arc 15 48 ft. 0.85 5.58 6.44 psi In/h psi 25 ft. 7ft. gpm1.55 In/h 30 1.17gpm ft. 1.76In/h In/h 2.03 psi gpm In/h In/h 30 23° 12 2.37 1.58 1.83 gpm psi gpm gpm In/h In/h 20 20 7 1.36 In/h3.32 2.91 In/h3.83 3.36 18 Series .43 24°psi Trajectoryft. psi 06 8 VAN 2.32 3.50 ft. 20 0.96 4.03 4.65 15 3.80 4.39 Q V Trajectory 4.04 10° Trajectory 330° Arc 4.07 330° Arc 15 30 3 847 0.62 7.232.79 8.353.22 0° Trajectory 15Arc 655 7 15 1.21 270°360° ArcArc 0.621.93 53.53 3.19 3.68 330° Arc 15 0.85 5.58 6.44 270° Arc 15 9 1.25 1.99 2.30 25 1.55 3.32 3.83 1.70 .06 67 360° 0.83 3.19 3.68 360° Arc 15 9 1.67 5.29 Nozzle 9 Q V Radius 25 Q 75 8 Pressure V1.36 2.52 3.46 Flow 1.09 4.58 Nozzle Radius Flow Precip Precip 25 Pressure3.00 20 2.91 20 15 3 658 0.70 1.11 Trajectory 20 4.04 6 0.722.32 6 2.563.50 3.36 2.95 20 0.96 4.03 4.65 20 26° 10 1.45 1.86 2.15 1.93 30 1.70 8.173.95 2.79 9.43Pressure 3.22 270° Arc 4.55 .67 57 20 0.96 2.56 2.95 Radius 10 20 2.89 Nozzle Pressure Flow Precip Precip Nozzle Radius 25 Flow Precip 30 18 Series 10 2.60 2.50 psiPrecip ft. gpm In/h In/h 30 25 1.20 3.50 4.04 psi ft. gpm 76 9 25 1.55 3.32 25 20 4 756 0.80 3.46 25 1.09 4.58 5.29 0.802.52 7 2.103.00 3.83 2.42 25 Nozzle11 VAN 1.62 1.72Radius 1.99 Flow 270° Arc 15 1.11 5.253.24 3.95 6.063.74 4.55 1.24 .57 55 1.07 2.10 2.42 25 11 2.16 Pressure psi ft. gpm In/h In/h 270° Arc 15 7 1.45 3.80 psi ft. gpm In/h In/h 270° Arc 15 4 0.79 6.34 7.32 360° Arc 15 5 0.83 3.19 3.68 360° Arc 15 9 4.39 1.67 30 30 8 10 1.70 30 25 4 767 0.88 1.41 2.60 2.79 2.50 3.22 2.89 30 1.20 3.50 4.04 0.88 1.76 2.03 30 12 1.77 1.58 1.83 gpm 20 1.24 5.783.69 3.24 6.674.25 3.74 .55 11 psi ft. 30 864.52360° 5.22 1.17 1.76 2.03 30 12 2.37 26° Trajectory 20 8 1.75 3.50 4.04 20 5 0.88 Arc 15 7 1.93 3.80 4.39 20 0.96 2.56 2.95 330° Arc 15 4 0.85 5.58 6.44 20 10 1.93 270° Arc 15 6 1.11 3.95 4.55 270° Arc 15 3 0.52 7.42 8.57 270° Arc 15 7 1.45 3.80 4.39 270° Arc 15 0.79 6.34 7.32 180° Arc 5 0.41 3.19 3.68 180° Arc 3.68 15 360° Arc9 0.84 1.9914 2.30 4.21 25 1.41 3.69 4.25 30 847 1.55 3.10 3.58 .11 77 15 270° Arc 15 5 0.62 3.19 270° Arc 15 9 1.25 9 1.89 3.00 25 20 1.00 5.13 5.92 1.07 2.10 20 2.42 825 3.50 4.04Radius 25 11 3.46 2.16 20 756 8 254.65 1.24 4.04 20 15 3 658 0.58 0.84 Pressure Flow 5 0.96 4.03 20 0.88 4.52 5.22 0.481.75 73.24 2.563.50 3.74 2.95 20 Nozzle2.32 10 0.97 1.86 2.15 4.70 30 1.55 8.274.49 3.10 9.5520 3.58 180° Arc 5.18 .77 90 20 15 20 6 0.72 2.56 2.95 30 10 2.10 2.70 3.12 20 10 1.45 30 6 1.10 3.92 4.53 1.17 1.76 2.03 925 psi ft. 25 3.46 25 7 9 305.29 1.41 25 20 4 756 0.66 0.97 25 1.00 5.13 5.92 30 12 1.99 gpm 2.37 0.531.89 83.69 2.103.00 4.25 2.42 25 2.52 3.00 3.46 180° Arc 15 0.84 5.293.81 4.49 6.1125 5.18 11 1.08 1.72 4.40 .90 13 5 1.09 4.58 180° Arc 2.42 15 360° Arc7 0.97 3.80 17 4.39 4.86 25 25 7 0.80 2.10 180° Arc 15 4 0.42 5.05 5.83 25 11 30 10 2.10 2.70 3.12 30 8 1.55 3.10 3.58 30 4 0.73 5.86 6.77 30 6 1.10 3.92 4.53 270° Arc 15 5 0.62 3.19 3.68 15 14 4.21 0.59 1.76 2.03 9 1.83 1.62 1.25 20 0.97 3.81 30 4.40 25 77 1.09 4.28 4.94 .13 30 270° Arc 12 1.18 1.58 69 30 10 2.60 2.50 2.89 6 1.20 3.50 4.04 20 8 1.20 3.50 4.04 20 5 0.49 3.77 4.35 30 18 5.32 0.88 1.76 2.03 30 12 1.77 180° 0.97 8 3.80 5.18 4.39 180° Arc Arc 15 15 65 7 30 0.84 4.49 180° Arc 15 30 3 847 0.32 1.19 6.843.58 7.904.13 180° Arc 15 0.42 5.05 5.83 90° Arc 0.21 3.19 3.68 25 1.09 4.28 4.94 20 6 0.72 2.56 2.95 20 15 4.70 .69 25 90° Arc 15 9 0.42 1.99 2.30 10 1.45 270° 4.90 Arc0.41 15 3.68 725 270° 1.45 3.80 4.399 3.46 3.16 270°0.49 Arc 3.77 9.1315 4 0.79 9 1.26 3.00 25 0.55 4.24 15 180° 157.32 53.81 3.19 Arc 15 0.84 20Arc 6.34 4.04 20 756 8 25 0.97 20 4.35 20 15 3 658 0.37 0.51 0.241.20 7 2.563.50 4.40 2.95 30 1.19 7.915.46 3.58 4.13 90° Arc 6.29 .25 0.37 20 180°Arc 10 0.48 1.8614 2.15 4.86 0.80 2.10 2.42 25 17 11 1.62 20 2.95 830 1.75 3.50 4.04 10 1.45 2.80 3.23 3.52 5 0.88 4.52 5.22 30 25 0.60 3.21 3.71 20 15 6 0.48 2.56 1.26 3.00 3.46 25 0.55 4.24 4.90 20 10 0.97 25 76 9 20 1.09 4.28 4.94 25 20 4 756 0.41 0.59 0.27 2.10 2.42 90° Arc 15 0.51 4.934.64 5.46 5.6920 6.29 5.35 0.37 1.86 25 11 0.54 1.72 18 1.99 5.32 30 0.26 86.26 0.88 1.76 2.03 15 30 12 1.77 90° Arc 7 0.48 3.80 4.39 90° Arc 15 4 7.23 25 2.42 930 270° Arc1.89 3.00 3.46 5 1.00 5.92 30Arc 5.13 3.23 25 17 3.65 30 0.60 3.21 3.71 0.53 2.10 30 8 10 25 1.19 3.58 30 25 4 767 0.45 0.66 25 11 20 0.59 5.415.19 4.64 6.2525 5.35 0.291.45 7 1.762.80 4.13 2.03 5.98 1.86 23 12 0.59 1.58 1.83 180° 15 5 0.41 3.19 3.68 15 14 3.16 180° Arc 9 4.04 1.08 0.84 20 8 0.58 3.50 20 5 0.30 4.62 5.33 90° Arc 15 7 0.48 3.80 4.39 90° Arc 15 4 0.26 6.26 7.23 90° Arc 15 6 0.51 6.29 30 2.03 10 2.10 2.70 3.12 90° Arc 15 30 3 87 0.21 0.72 30 18 3.99 30 6 1.10 3.92 4.53 30 865.46 0.59 1.76 25 0.66 8.984.33 5.19 10.37 5.98 5.00 .23 06 30 12 1.18 20 0.48 2.56 2.95 20 15 3.52 10 0.97 9 0.63 3.00 14 3.46 2.11 25 0.340.58 54.64 5.243.50 5.35 4.04 5.33 20 75 8 155.83 0.59 20 20 3 58 0.24 30 0.72 4.33 11.86 5.00 .06 Arc0.97 15 90°20 Arc 5.05 3.19 3.68 725 180° 180° 6.05 Arc0.21 15 2.42 3.80 4.3917 90° Arc 15 911 3.35 3.65 0.42 180°0.30 Arc10.274.62 15 4 0.42 25 7 0.53 2.10 25 1.08 30 10 0.75 2.90 30 6 0.37 3.96 4.57 25 3.46 6.05 25 7 9 204.35 0.660.63 65.193.00 5.98 25 25 4 5 0.26 0.34 6.265.24 7.2320 20 15 2.35 0.24 2.56 2.95 20 10 0.48 20 8 1.20 3.50 4.04 5 0.49 3.77 30 0.720.75 84.332.90 5.00 0.59 1.76 2.03 30 18 3.99 12 1.18 30 10 3.35 30 8 30 30 4 6 0.29 0.37 6.983.96 8.064.57 1525 Series2.42 HE-VAN 10 Series HE-VAN0.55 25 17 2.43 25 7 0.27 2.10 25 11 0.54 9 1.26 3.00 3.46 25 5 4.24 4.90 90° Arc 15 5 0.21 3.19 3.68 180° Arc 15 14 2.11 90° Arc 9 0.42 10 Series VAN 30 18 2.66 30 86 0.29 1.76 2.03 30 12 0.59 30 10 1.45 2.80 3.23 20 0.24 2.56 2.95 20 15 2.35 12 Series VAN 30 6 0.60 3.21 3.71 25° Trajectory 10 0.48 15 Series VAN 27° Trajectory 10 Series VAN Q V Q V 90° Arc 15 14 1.05 25 7 0.27 2.10 2.42 25 17 2.43 11 0.54 90° Arc 15 7 0.48 3.80 4.39 12 Trajectory Series VAN 90° Arc 15 4 0.26 6.26 7.23 15 Series VAN 10° Q V V Nozzle Pressure Radius Flow Precip Precip 1.17 Nozzle Pressure Radius Flow Precip Precip 15° Trajectory 23° Trajectory 20 15 10° Trajectory 10 Series 305.33 gpm 8Q V 0.29 1.76 18 2.66 VAN 0.30 Pressure Radius Flow Precip Precip 20 2.03 8psi 30 Q V VAN 12 In/h 0.59 Nozzle Q V Vrecip 6 Series 0.58 3.50 4.04 ft. gpm In/h psi ft. In/h In/h 20 5 Trajectory 4.62 15° Trajectory 25 17 1.22 23° Nozzle Pressure Radius Flow Precip Precip psi ft. gpm In/h In/h Nozzle Pressure Radius Flow Precip Precip n/h Nozzle Pressure Radius Flow Precip Precip Precip 90° Arc 0.63 15 1.05 Q V 360° 11 2.62 2.08 5Arc 360° 15 7 6.05 1.26 2.48Q 2.86V 25 Arc 915 3.00 3.4614 2.40 25 0.34 30 psi ft. 10Pressure Series5.24 HE-VAN psi 15 Series ft. HE-VAN gpm In/h18 In/h 1.33 psi gpmQ Precip In/h V Precip In/h 10° Trajectory 360° Arc 15 7ft. Flow 1.93 3.80 4.39 n/h 44 0° Trajectory Nozzle Nozzle Radius gpm Flow In/h PrecipIn/h Precip Q V 20 15 1.17 Pressure Radius 20 12 3.02 2.02 2.33 20 8 1.46 2.19 2.53 30Arc 10 0.75 2.90 3.35 2.39 30 6Arc 0.37psi 3.96 4.57 360° 15 9Radius 1.56 360° 15 11 2.60 2.07 360° Arc 15 1.93 Precip 3.80 Precip 4.39 20 87 2.32 3.50 4.04 psi ft. In/h In/h .44 65 Nozzle Pressure Flow Precip Precip Nozzle Pressure Radius Flowgpm 25 14 3.38 1.66 25 17 1.92 1.22 25 9 ft. 1.63gpm 1.86 1.94In/h 2.14 2.24In/h Trajectory 27° 15 Trajectory10 20 25° 12 HE-VAN 3.00 2.01 18 2.32 1.33 20 2.32 In/h1.86 3.50 In/h2.14 4.04 25 2.52 3.00 3.46 360° Arc .65 29 psi ft. gpm In/h In/h 360° Arc psi 15 ft. 98 gpm1.56 1.83 20 2.07 2.06 2.39 Q V 30 15 3.70 1.58 30 10 11 1.86 1.782.60 1.79 1.72 1.98 15 Series 30 10 Series HE-VAN 25 11 2.12 1.68 25 Nozzle11 14 3.30 1.62 Radius 1.87 Flow 25 9 2.52 5.581.79 3.00 6.442.06 3.46 30 2.60 2.50 2.89 .29 04 360° 15 77 12 Pressure 1.93 3.80 4.39 20 2.32 330° Arc 15 20 4 10 0.851.86 Pressure2.08 Nozzle Flow Precip 270° Arc Precip 15 1.96 2.40 270°Arc Arc 15 0.953.00 Radius 2.482.01 1.95 2.86 30 12 2.36 1.58 1.82 30 10 2.60 2.50 2.89 30 15 3.70 1.58 1.83 270° Arc 15 7 1.45 3.80 4.39 25 11 2.12 1.68 1.95 .04 32 1.62 4.04 1.87 20 2.32 3.50 20 5 0.96 4.03VAN 4.65 psi gpm gpm In/h In/h 20 25° Trajectory 12 Series 27° 25 Trajectory88 14 psi 12 2.27 2.02 ft. 20 1.093.30 ft. 2.19 2.53 2.33 15 1.17 15 Series 1.83VANQ 270° Arc 1.86 270° Arc 15 1.45 4.581.58 3.80 5.291.82 4.39 20 87 1.75 3.50 4.04 270° Arc V 15 360° Arc 11 1.95 2.07 11 2.39 2.62 .32 22 30Arc 99 15 15 25 2.52 3.00 3.46 25 30 5 12 1.092.36 15 360° 1.26 2.48 14 2.53 1.92 25 1.223.70 7 1.941.58 2.14 2.24 Pressure1.66 Radius Flow Nozzle Pressure Radius Flow Precip 2.86 Precip 25 20 10 1.39 1.79 2.06 20 1.75 3.501.86 3.50 4.042.14 4.04 25 1.89 3.00 3.46 270° Arc 1.17 20 Nozzle15 12 2.25 2.01 12 2.32 3.02 .22 92 270° Arc 15 11 20 1.95 8 2.07 2.39 30 2.60 2.50 2.89 30 15 6 98 1.20 15° Trajectory 23° Trajectory 20 1.46 2.19 2.53 30 2.78 1.58 1.83 30 10 1.34 1.72 1.98 psi psiV1.59 ft. gpm In/h In/h 25 0.791.39 2.06 25 Q 11 1.94 14 Q V ft. 1.87 gpm 1.68 25 9 1.89 6.341.79 3.00 7.32 3.46 30 2.10 2.70 3.12 .92 2.48 1.62 53 20 2.25 9 2.01 2.32 270° Arc 15 77 12 25 1.45 3.80 4.39 270° Arc 15 20 4 10 180° Arc 15 11 1.31 2.08 2.40 25 14 3.38 180° Arc 15 0.63 2.48 2.86 1.63 1.94 2.24 360° Arc 15 11 2.62 360° Arc Precip 15Precip 71.58 1.26 2.48Pressure 2.86 Radius Nozzle Pressure Radius Flow Nozzle Flow Precip Precip2.33 30 12 1.77 30 2.10 4.521.68 2.70 5.22 3.12 180° Arc 15 710 0.88 0.97 3.80 4.39 1.59 1.94 .53 83 30 15 2.78 1.58 1.83 1.87 20 88 14 30 1.75 3.50 4.04 20 25 5 11 20 12 1.51 2.02 20 25 0.732.48 10 2.191.62 1.82 2.53 30 1.78 1.72 20 12 2.39 3.70 3.02 83.00 1.46 2.19 2.53 ft. psi gpm In/h psiArc 1.98 gpm In/h In/h15 180° Arc 15 0.97 5.131.58 3.80 5.92 4.39 180°ft. Arc 15 99 15 20In/h 0.78 20 87 1.20 3.50 4.04 1.82 .83 35 180° 15 11 1.30 2.07 30 1.83 25 1.89 3.46 25 30 5 12 1.001.77 14 1.69 1.66 1.92 1.96 25 0.812.78 71.86 1.941.58 2.14 2.24 270° Arc 15 11 270° Arc 1.86 152.14 0.95 2.48 2.86 25 25 14 25 9 1.63 1.94 2.24 20 1.20 3.50 4.53 4.04 25 1.26 3.00 3.46 180° Arc 0.78 2.14 20 10 0.93 1.79 2.06 .35 90 180° 15 11 1.30 2.07 2.39 20 12 1.50 2.01 2.32 3.38 360° Arc3.921.86 15 9 Arc 1.56 30 2.10 2.70 3.12 360° Arc 15 11 2.60 2.07 2.39 30 15 6 98 1.10 30 15 1.85 1.58 12 1.83 30 10 0.89 1.72 1.98 20 20 8 1.09 2.19 2.53 25 9 1.26 5.051.79 3.00 5.83 3.46 30 1.45 2.80 3.23 30 3.70 2.06 25 11 1.06 1.68 .90 71 1.78 1.72 2.32 25 14 1.65 1.62 1.87 2.27 180° Arc 15 77 12 302.06 0.97 3.80 4.39 180° Arc 15 20 4 10 0.420.93 20 10 1.86 1.79 3.00 2.01 2.3215 90°20 Arc 1.98 12 15 11 0.65 2.08 2.40 90° Arc 15 20 0.321.50 10 2.482.01 1.95 2.86 25 14 1.22 1.94 30 1.45 3.771.68 2.80 4.351.95 3.23 90° Arc 15 710 0.491.06 0.48 3.80 4.39 30 12 1.18 .71 23 25Arc 1.68 1.65 9 1.62 1.82 1.87 15 11 2.33 1.96 30 270° Arc 15 1.85 1.58 1.83 2.53 270° 151.95 71.58 0.95 2.4825 2.24 2.86 14 20 88 14 25 1.20 3.50 4.04 20 25 5 11 20 12 0.76 2.02 25 11 2.12 20 0.36 2.19 2.53 3.30 1.62 1.87 30 15 2.78 30 10 1.34 1.72 1.98 90° Arc 15 0.48 4.241.58 3.80 4.901.82 4.39 20 87 0.58 3.50 4.04 .23 33 90° Arc 15 9 0.39 1.86 2.14 30 15 1.85 1.58 1.83 90° Arc 15 11 0.65 2.07 2.39 20 12 2.27 25 1.26 3.00 3.46 20 8 1.09 2.19 2.53 25 30 5 12 0.551.18 25 180° Arc 14 0.84 1.66 1.92 1.31 25 9 0.41 1.94 2.24 30 12 2.36 1.58 1.82 30 15 3.70 1.58 1.83 15 11 180° Arc 15 7 0.63 2.48 2.86 20 0.58 3.211.86 3.50 3.712.14 4.04 25 0.63 3.00 3.46 90° Arc .33 05 20 10 0.46 2.06 90° Arc 2.39 20 12 0.75 2.01 14 1.83 2.32 2.53 30 1.45 2.80 3.23 30 15 6 98 0.600.39 25 1.22 1.94 2.24 30 15 0.93 1.58 30 15 10 11 252.14 0.450.65 91.79 1.722.07 1.98 270° Arc 15 9 1.17 1.86 270° Arc 15 11 1.95 2.07 2.39 20 12 1.51 25 9 0.63 3.00 3.46 30 0.75 2.90 3.35 20 10 0.46 1.79 2.06 20 8 0.73 2.19 2.53 .05 57 20 12 0.75 2.01 2.32 25 11 0.53 1.68 1.95 25 14 0.82 1.62 1.87 90° Arc 15 7 3.80 4.39 90° Arc 15 4 0.26 6.26 7.23 30 15 2.78 30 0.48 10 1.34 1.72 1.98 30 10 0.300.53 0.75 4.621.68 2.90 5.33 3.35 1.95 20 10 1.39 .57 25 14 1.83 1.31 1.69 25Arc 1.79 1.87 30 12 0.59 2.25 2.01 2.3211 0.81 1.94 30 180° Arc 15 0.92 1.58 20 8 14 25 0.580.82 9 3.501.62 1.82 4.04 20 25 5 11 15 180° 152.06 71.58 0.63 2.4820 2.24 2.86 12 30 12 0.59 1.58 1.82 1.83 30 1.85 25 11 1.59 1.68 1.94 0.89 1.72 25 30 9 15 30 0.630.92 10 3.001.58 3.46 25 1.98 14 2.48 1.62 1.8715 25 5 0.34 5.24 6.05 20 12 1.51 20 8 0.73 2.19 2.53 18 Series VAN 15 Series VAN 90° Arc 15 11 0.65 30 10 0.75 2.90 3.35 90° Arc 1.58 15 79 0.32 2.48 2.86 15 30 6 0.37 3.96 4.57 30 12 1.77 2.78 1.58 1.8314 25 1.69 251.82 0.81 1.9430 2.24 15 Series VAN 20 12 0.76 20 8 0.36 2.19 2.53 180° Arc 15 9 0.78 1.86 2.14 26° Trajectory 180°V Arc 15 11 1.30 2.07 2.39 30 15 1.85 30 10 0.89 1.72 1.98 23° Trajectory Q V Q V 25 14 0.84 25 9 0.41 1.94 2.24 20 10 0.93 23° Trajectory 15 0.65 90° Arc 1.79 152.06 7Precip Precip 0.32 2.4820 2.86 12 90° Arc1.50 2.01 2.3211 Nozzle Pressure Radius Flow Pressure Radius Flow Precip Precip Vrecip 12 Series Nozzle Q V VAN 15 Series VAN 30 15 0.93 30 10 0.45 1.72 1.98 20 12 0.76 20 8 0.36 2.19 2.53 psi ft. gpm In/h In/h 25 11 1.06 1.68 1.95 n/h 25 14 1.65 1.62 1.87 psi recip Nozzle Pressure ft. Radius gpm Flow In/h Precip In/h Precip 360° Arc 15 14 4.21 2.39 25 14 0.84 n/h 14 251.82 92.07 0.41 1.9430 2.24 15 15° Trajectory psi ft. gpm In/h In/h 360° Arc 15 11 2.60 2.07 2.39 23° Trajectory 30 12 1.18 1.58 1.85 1.58 1.83 Q V Q V 20 15 4.70 2.0190° Arc 2.32 .14 06 30 0.93 360° Arc 15 11 Flow 2.60 2.07Precip 2.39 20 12 2.01 2.32 0.45 1.7215 1.98 11 90°3.00 ArcPrecip 15 9 0.39 0.65 2.07 2.3915 Nozzle Pressure Radius Nozzle Pressure 1.86 Radius302.14 Flow 10 Precip Precip .06 25 17 4.86 1.62 1.87 95 20 12 3.00 2.01 2.32 25 14 3.30 1.62 1.87 18 Series1.79 VAN psi ft. gpm In/h In/h20 psi ft. gpm In/h In/h 10 0.46 2.06 20 12 0.75 2.01 2.32 0.62 0.70 0.80 0.88 270°0.52 Arc 0.58 0.66 0.73 0.32 180°0.37 Arc 0.41 0.45 0.21 0.24 90°0.26 Arc 0.29
Q Precip In/h Q 3.19 Precip 2.56 In/h 2.10 3.19 1.76 2.56 3.19 2.10 2.56 1.76 2.10 3.19 1.76 2.56 3.19 2.10 2.56 1.76 2.10 3.19 1.76 2.56 3.19 2.10 2.56 1.76 2.10 3.19 1.76 2.56 2.10 1.76
Q V Precip Precip In/h In/h Q V 2.48 Precip 2.86 Precip 2.19 2.53 In/h In/h 1.94 2.24 2.48 2.86 1.72 1.98 2.19 2.53 2.48 2.86 1.94 2.24 2.19 2.53 1.72 1.98 1.94 2.24 2.48 2.86 1.72 1.98 2.19 2.53 2.48 2.86 1.94 2.24 2.19 2.53 1.72 1.98 1.94 2.24 2.48 2.86 1.72 1.98 2.19 2.53 2.48 2.86 1.94 2.24 2.19 2.53 1.72 1.98 1.94 2.24 2.48 2.86 1.72 1.98 2.19 2.53 1.94 2.24 Q V 1.72 1.98 Precip Precip In/h In/h Q V 1.99 Precip 2.30 Precip 1.86 2.15 Q V In/h In/h 1.72 1.99 Precip Precip 1.99 2.30 In/h In/h 1.58 1.83 1.86 2.15 Q V 2.07 2.39 1.99 2.30 1.72 1.99 Precip Precip 2.01 2.32 1.86 2.15 In/h In/h 1.58 1.83 1.62 1.87 1.72 1.99 2.07 2.39 1.99 2.30 1.58 1.83 1.58 1.83 2.01 2.32 1.86 2.15 2.07 2.39 1.99 2.30 1.62 1.87 1.72 1.99 2.01 2.32 1.86 2.15 1.58 1.83 1.62 1.87 1.72 1.99 2.07 2.39 1.99 2.30 1.58 1.83 1.58 1.83 2.01 2.32 1.86 2.15 2.07 2.39 1.99 2.30 1.62 1.87 1.72 1.99 2.01 2.32 1.86 2.15 1.58 1.83 1.62 1.87 1.72 1.99 2.07 2.39 1.99 2.30 1.58 1.83 1.58 1.83 2.01 2.32 1.86 2.15 2.07 2.39 1.62 1.87 1.72 1.99 2.01 2.32 1.58 1.83 1.62 1.87 2.07 2.39 1.58 1.83 2.01 2.32 1.62 1.87 Q V 1.58 1.83 Precip Precip In/h In/h Q V 2.08 Precip 2.40 Precip 2.02 2.33 In/h In/h 1.66 1.92 2.08 2.40 1.58 1.83 2.02 2.33 2.08 2.40 1.66 1.92 2.02 2.33 1.58 1.83 1.66 1.92 2.08 2.40 1.58 1.83 2.02 2.33 2.08 2.40 1.66 1.92 2.02 2.33 1.58 1.83 1.66 1.92 2.08 2.40 1.58 1.83 2.02 2.33 2.08 2.40 1.66 1.92 2.02 2.33 1.58 1.83 1.66 1.92 2.08 2.40 1.58 1.83 2.02 2.33 1.66 1.92 1.58 1.83
25° Trajectory 15 Series HE-VAN Nozzle P p 25° Trajectory 360° Arc 1 Nozzle P 2p 21 360° Arc 32 270° Arc 12 23 21 270° Arc 32 180° Arc 12 23 21 180° Arc 32 90° Arc 12 23 21 90° Arc 32 2 3
TORO PRESSURE COMPENSATING NOZZLES Just pick your spacing and choose your arc - the nozzle does everything else. With a wide selection of patterns available, you are assured an MPR nozzle can match just about any design requirement. PRE-INSTALLED PRESSURE COMPENSATION DEVICE (PCD) ELIMINATE FOGGING, CONSERVE WATER AND PROVIDE PRECISE FLOW RATES.. 5' with 0° Trajectory
8' with 5° Trajectory 8' Series with 5° Trajectory
5' Series with 0° Trajectory Arc
Desc.
90°
5-Q-PC
120°
5-T-PC
5-T-PC
180°
5-H-PC
5-H-PC
240°
5-TT-PC
5-TT-PC
270°
5-TQ-PC
5-TQ-PC
360°
5-F-PC
5-F-PC
5-Q-PC
Prec. Rate PSI GPM Radius SQ TR 30-40 0.09 5 1.61 1.40 40-75 0.10 5 1.79 1.55 30-40 0.12 5 1.61 1.40 40-75 0.13 5 1.79 1.55 30-40 0.18 5 1.61 1.40 40-75 0.20 5 1.79 1.55 30-40 0.23 5 1.54 1.34 40-75 0.27 5 1.81 1.57 30-40 0.26 5 1.55 1.34 40-75 0.29 5 1.73 1.50 30-40 0.35 5 1.57 1.36 40-75 0.39 5 1.75 1.51
Arc
Desc.
90°
8-Q-PC
120°
8-T-PC
8-T-PC
180°
8-H-PC
8-H-PC
240°
8-TT-PC
8-TT-PC
270°
8-TQ-PC
8-TQ-PC
360°
8-F-PC
8-F-PC
8-Q-PC
PSI
GPM
30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
0.22 0.25 0.29 0.35 0.44 0.50 0.59 0.70 0.64 0.70 0.85 1.00
Radius 8 8 8 8 8 8 8 8 8 8 8 8
Prec. Rate SQ TR 1.54 1.33 1.75 1.51 1.52 1.32 1.84 1.59 1.54 1.33 1.75 1.51 1.55 1.34 1.84 1.59 1.49 1.29 1.63 1.41 1.49 1.29 1.75 1.51
12' with 23° Trajectory
10' with 12° Trajectory
12' Series with 23° Trajectory
10' Series with 12° Trajectory Arc
Desc.
90°
10-Q-PC
10-Q-PC
120°
10-T-PC
10-T-PC
180°
10-H-PC
10-H-PC
240°
10-TT-PC
10-TT-PC
270°
10-TQ-PC
10-TQ-PC
360°
10-F-PC
10-F-PC
PSI 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
GPM 0.33 0.37 0.44 0.50 0.66 0.75 0.89 1.00 0.99 1.09 1.33 1.51
Radius 10 10 10 10 10 10 10 10 10 10 10 10
Prec. Rate SQ TR 1.48 1.28 1.66 1.43 1.48 1.28 1.68 1.45 1.48 1.28 1.68 1.45 1.49 1.29 1.68 1.45 1.48 1.28 1.63 1.41 1.49 1.29 1.69 1.46
Arc
90°
12-Q-PC
120°
12-T-PC
180°
12-H-PC
240°
12-TT-PC
270°
12-TQ-PC
360°
12-F-PC
Desc.
PSI
GPM
30-40 12-Q-PC 40-75 30-40 12-T-PC 40-75 30-40 12-H-PC 40-75 30-40 12-TT-PC 40-75 30-40 12-TQ-PC 40-75 30-40 12-F-PC 40-75
0.48 0.53 0.64 0.70 0.96 1.05 1.28 1.40 1.44 1.60 1.92 2.10
Radius 12 12 12 12 12 12 12 12 12 12 12 12
Prec. Rate SQ TR 1.49 1.29 1.65 1.43 1.49 1.29 1.63 1.41 1.49 1.29 1.63 1.41 1.49 1.29 1.63 1.41 1.49 1.29 1.66 1.44 1.49 1.29 1.63 1.41
SPECIAL PATTERN
15' with 27° Trajectory 15' Series with 27° Trajectory Arc
Desc.
90°
15-Q-PC
15-Q-PC
120°
15-T-PC
15-T-PC
180°
15-H-PC
15-H-PC
240°
15-TT-PC
15-TT-PC
270°
15-TQ-PC
15-TQ-PC
360°
15-F-PC
15-F-PC
PSI
GPM Radius
30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
0.75 0.81 1.00 1.10 1.50 1.65 2.00 2.20 2.30 2.50 3.00 3.30
15 15 15 15 15 15 15 15 15 15 15 15
Special Patterns Prec. Rate SQ TR 1.49 1.29 1.61 1.40 1.49 1.29 1.64 1.42 1.49 1.29 1.64 1.42 1.49 1.29 1.64 1.42 1.53 1.32 1.66 1.44 1.49 1.29 1.64 1.42
Pattern
4' x 15'
4-EST-PC
4' x 30'
4-CST-PC
9' x 18'
9-SST-PC
4' x 30'
4-SST-PC
2' x 6'
2-SST-PC
4' x 18'
4S-SST-PC
Desc.
PSI 30-40 4-EST-PC 40-75 30-40 4-CST-PC 40-75 30-40 9-SST-PC 40-75 30-40 4-SST-PC 40-75 30-40 2-SST-PC 40-75 30-40 4S-SST-PC 40-75
Patterns GPM Special Width Length 0.43 4' x 15' 0.50 4' x 15' 0.86 4' x 30' 1.00 4' x 30' 1.10 9' x 18' 1.20 9' x 18' 0.88 4' x 30' 1.00 4' x 30' 0.09 2' x 6' 0.10 2' x 6' 0.50 4' x 18' 0.59 4' x 18'
Prec. Rate* 1.38 1.61 1.38 1.61 1.31 1.43 1.41 1.61 1.44 1.61 1.34 1.58
63
TORO TVAN VARIABLE ARC NOZZLES INFINITELY ADJUSTABLE FROM 0° - 360°
ADJUSTABLE NOZZLE
570 Variable Arc Nozzle Performance Data Pattern
PSI
90°°
20 30 40 50 20 30 40 50 20 30 40 50 20 30 40 50
180°
8'
TVAN-8
10'
TVAN-10
12'
270°
TVAN-12
360°
15'
Specifications TVAN-15
17'
TVAN-17 Operating Specifications
10' Series 12' Series 15' Series 8' Series GPM Rad GPM Rad GPM Rad GPM Rad 0.58 7 0.59 9 0.76 10 1.06 15 0.71 8 0.72 10 0.93 12 1.29 15 0.82 9 0.84 10 1.07 12 1.49 16 0.92 9 0.94 10 1.21 13 1.66 16 0.81 7 0.94 9 1.35 10 1.71 14 0.99 8 1.15 10 1.65 12 2.08 15 1.15 8 1.33 10 1.91 12 2.40 15 1.28 9 1.49 10 2.13 13 2.68 15 1.08 7 1.37 9 1.90° 11 2.41 14 1.33 8 1.67 10 2.32 12 2.94 15 1.53 8 1.92 10 2.68 12 3.38 15 1.70 9 2.15 10 2.99 12 3.77 16 1.25 7 1.73 9 2.27 10 2.69 13 1.52 8 2.11 10 2.77 12 3.26 15 PRN9 Visual Arc Adjustment 1.75 2.42 10 3.12 12 3.79 15 1.96 9 2.69 10 3.47 12 4.33 16
17' Series GPM Rad 1.25 16 1.46 17 1.68 18 1.87 18 1.95 15 2.38 17 2.74 17 3.06 18 2.69 14 3.28 17 3.76 17 4.19 18 3.05 17 3.73 17 4.26 18 4.71 18
PRN Visual Arc Adjustment IRRITROL I-PRO 9’ STRIP NOZZLES • Radius: 14’-26’ (4,3-7,9m) • Operating pressure range: 20-75 psi (1,4-5,2 Bar) Specifications • Recommended Pressure: 40-50 psi (2,8-3,5 Bar) Specifications •Operating Flow Rate: 0.17-3.68 GPM (1,4-14 LPM)
9’ STRIP • Radius: 14’-26’ (4,3-7,9m) Additional Features
GREAT FOR SMALL STRIPS
180° working pattern Right 180° edge working pattern
• Operating NOZZLES pressure range: 20-75 psi (1,4-5,2 Bar) •• 15 unique streams with different trajectories 9' Series with 20° Recommended Pressure: 40-50 psi (2,8-3,5 Bar)Trajectory •• Maximum of 20° trajectory to fight through windFlow Flow Rate: height 0.17-3.68 GPM (1,4-14 LPM) WxL Pressure Right Nozzleand shrub • Threads onto nearly all sprayheads adapters psi ft. GPM edge Additional Features (male or female) 3x8 0.41 IPN-9EST 20 The unique adjustment method allows for pre-setting of arc by ion™ Series Rotating •• Pre-attached screenwith for easy installation 30 4x9 0.45 15 unique streams different trajectories hand or tool before the nozzle is installed. Visual indicators allow 40 5 x 10 0.48 •• Radius reduction up to 25% by turning set screw 90° Maximum height of 20° trajectory to fight through wind m Nozzles 3 x 16 0.85 the user to quickly adjust the arc pattern to the desired arc from •• Color coded identify adjustable or full20 circleadapters IPN-9CST Threads ontotonearly all sprayheads and shrub 30 4 x 18 0.90° 45-270°. The adjustment band can be adjusted by hand or with the 4' x 18' CENTRE IPN-9CST • Precipitation rate = 0.55”/hr. (14 mm/hr.) on square (male or female) 40 5 x 20 0.97 pre-included tool. spacing IPN-9EST plansscreen for easy installation 20 3 x 16 0.85 The unique adjustment method allows for pre-setting of arc by 4' x 9' END• Pre-attached IPN-9SST • Maintains precipitation rate as is reduced 30 4 x 90° 18 0.90° hand or tool before the nozzle is installed. Visual indicators allow Radius reduction up to 25% byradius turning set screw 4' x 18' SIDE IPN-9SST 40 • Matched precipitation 14-26 or feet (4,3-7,9m) Color coded to identifyfrom adjustable full circle 5 x 20 0.97 the user to quickly adjust the arc pattern to the desired arc from 45-270°. The adjustment band can be adjusted by hand or with the •• Matched precipitation from 20-75 psi (1,4-5,2 Bar) Precipitation rate = 0.55”/hr. (14 mm/hr.) on square pre-included tool. • Adjustable by hand or with included tool spacing plans Performance Data—Precision™ Series Rotating Nozzles—US •• Consistent speed of rotation not affected by pressure Maintains precipitation rate as radius is reduced Precip.Rate Precip. Rate Arc PSI GPM Radius • Matched precipitation from 14-26 feet (4,3-7,9m) (in./hr.) (in./hr.) Warranty 20 0.17 14.0 0.67 0.77 • Matched precipitation from 20-75 psi (1,4-5,2 Bar) 30 0.19 15.0 0.65 0.75 •• Five years by hand or with included tool Adjustable 40 0.25 17.0 0.67 Nozzles—US 0.77 Performance Data—Precision™ Series Rotating 45° Gear-Driven • Consistent speed of rotation not affected by pressure 50 0.31 18.5 0.70 0.81
rrigation
TORO PRECISION™ STREAM NOZZLES Precision seriesWarranty rotating stream nozzles utilise a proven planetary gear •drive, variable stator and turbine to rotate the Five years nozzle.
PRECISION PRECISION STREAM STREAM Precision Series Rotating Nozzle Model List FEMALE MALE
Male Threaded
Description
• PRN-TA
Toro Threaded, 14-26 feet (4,3-7,9m),
• PRN-TF Male Threaded
Toro Threaded, 14-26 feet (4,3-7,9m), Description Full-Circle
Adjustable fromNozzle 45°-270° Precision Series Rotating Model List
45° - 270° Female PRN-A • PRN-TA Threaded 360° PRN-F • PRN-A • PRN-TF
• PRN-F Female Threaded • PRN-A • PRN-F
64
PRN-TA Toro Threaded, 14-26 feet (4,3-7,9m), Description Adjustable from 45°-270° PRN-TF Threaded, 14-26 feet (4,3-7,9m), Toro Threaded, 14-26 feet (4,3-7,9m), Adjustable from 45°-270° Full-Circle Threaded, 14-26 feet (4,3-7,9m), Description Full-Circle Threaded, 14-26 feet (4,3-7,9m), Adjustable from 45°-270° Threaded, 14-26 feet (4,3-7,9m), Full-Circle
Arc
90° 45°
120° 90°
180° 120°
240° 180°
270° 240°
270° 360°
360°
60 75 20 30 40 50 60 75 20 30 40 50 60 75 20 30 40 50 60 75 20 30 40 50 60 75 20 30 40 50 60 75 20 30 40 50 60 75 20 30 40 50 60 75
PSI
0.35 0.43 0.43 0.17 0.49 0.19 0.62 0.25 0.75 0.31 0.82 0.35 0.92 0.43 0.48 0.43 0.57 0.49 0.78 0.62 0.97 0.75 1.07 0.82 1.18 0.92 0.83 0.48 0.94 0.57 1.22 0.78 1.46 0.97 1.61 1.07 1.81 1.18 1.12 0.83 1.27 0.94 1.56 1.22 1.80 1.46 1.95 1.61 2.20 1.81 1.08 1.12 1.23 1.27 1.62 1.56 2.00 1.80 2.26 1.95 2.60 2.20 1.81 1.08 2.00 1.23 2.56 1.62 3.09 2.00 3.34 2.26 2.60 3.68 1.81 2.00 2.56 3.09 3.34 3.68
GPM
19.5 22.0 16.0 14.0 17.5 15.0 20.5 17.0 22.5 18.5 23.5 19.5 25.0 22.0 16.4 16.0 17.5 20.2 20.5 22.5 23.5 25.0 15.0 16.4 17.0 17.5 20.5 20.2 22.5 24.0 23.5 26.0 25.0 15.0 17.0 20.0 20.5 21.5 22.5 22.5 24.0 24.0 26.0 14.0 15.0 16.0 17.0 19.0 20.0 21.5 23.0 22.5 25.0 24.0 15.0 14.0 17.2 16.0 20.9 19.0 22.9 21.5 23.8 23.0 25.0 25.6 15.0 17.2 20.9 22.9 23.8 25.6
Radius
Precip.Rate 0.71 0.68 (in./hr.)
Precip. 0.82Rate 0.79 (in./hr.)
0.65 0.75 0.67 0.77 0.62 0.71 0.65 0.75 0.57 0.66 0.67 0.77 0.57 0.66 0.70 0.81 0.57 0.66 0.71 0.82 0.57 0.65 0.68 0.79 0.69 0.79 0.65 0.75 0.72 0.83 0.62 0.71 0.55 0.64 0.57 0.66 0.55 0.64 0.57 0.66 0.56 0.65 0.57 0.66 0.55 0.63 0.57 0.65 0.71 0.82 0.69 0.79 0.63 0.72 0.72 0.83 0.56 0.65 0.55 0.64 0.56 0.64 0.55 0.54 0.62 0.56 0.65 0.52 0.60 0.55 0.63 0.72 0.83 0.71 0.82 0.63 0.73 0.72 0.56 0.65 0.56 0.65 0.64 0.56 0.64 0.54 0.62 0.55 0.64 0.52 0.60 0.71 0.81 0.72 0.83 0.62 0.71 0.63 0.73 0.57 0.66 0.56 0.65 0.55 0.64 0.56 0.65 0.55 0.63 0.56 0.64 0.53 0.61 0.55 0.64 0.77 0.89 0.71 0.81 0.65 0.75 0.62 0.71 0.56 0.65 0.57 0.66 0.57 0.65 0.55 0.64 0.57 0.66 0.55 0.63 0.53 0.61 0.54 0.62 0.77 0.89 Nozzle change. 0.65 data subject to 0.75 0.56 0.65 0.57 0.65 0.57 0.66 0.54 0.62
Specifying Information—Precision Series Rotating Nozzle PRN-XX
Nozzle data subject to change.
PRECISION™ SERIES SPRAY NOZZLES Toro’s new Precision Series Spray Nozzles are the most complete and efficient spray nozzle line available to help irrigation professionals manage water use, eliminate runoff and reduce customer water bills. The Precision Spray nozzles 1”/hr precipitation rate ensures that water is applied more slowly and evenly without sacrificing landscape health. These nozzles are™available in a wide selection of arcs and radii, as well as male and female threads, making them ideal for large scale installations and retrofits.
PRECISION SERIES SPRAY NOZZLES The “O” Advantage
TimePrecision Savings Spray nozzles deliver an industry first
™ 1”/hr precipitation is significantly All Precision Series Spray Nozzlesrate can which be combined on the same zone less than traditional spray nozzles. On retrofits for greater designPRECISION and installation™flexibility, which equates to time SERIES SPRAYbetween NOZZLES for water savings, the 1:1 relationship savings on the job site. Whether a new installation or retrofit project, popular spray nozzles™ and Precision Spray nozzlesprocess meets the needs of any the comprehensive rangemake of Precision nozzles will the retrofit straight Time Savings projectAll forward, and all Series models available in Toro threads. accurate and less since Precision Spray are Nozzles can be combined ontime the(Male) sameconsuming zoneand Female
5’
8’
10’
12’
™
for greater design andarc installation flexibility, which equates to time adjustment is eliminated.
5’
savings Plus on the job site. and Whether a new installation retrofit project, Nine Arcs, Side Center Strips or Available the comprehensive range of Precision™ nozzles meets the needs of any project and all models are available in Toro (Male) and Female threads. Nine Arcs, Plus Side and Center Strips Available
60°
90°/Q 60°
120°/T
90°/Q
120°/T
150° 150°
180°/H
210°
8’
10’ Side and Corner Strips Available 12’
4’ X 15’ 4’ X 9’
Side and Corner Strips Available
180°/H
210°
240°/TT 270°/TQ 360°/F 4’ X 15’
4’ X 30’ 4’ X 18’
15’
4’ X 30’ 4’ X 18’
LCS X 15’ (Left Corner4’4’Strip) X 9’
(Left Corner Strip)
™
SST (Side Strip)™
(Side Strip)
New technology prevents inconsistant spray patterns like this.
PRECISION SERIES SPRAY NOZZLES 8’ Radius
RCS (Right Corner Strip)
(Right Corner Strip)
™
5’ Radius
4’ X 15’ 4’ X 9’
PRECISION SERIES SPRAY NOZZLES PRECISION SERIES SPRAY NOZZLES LCS SST RCS 4’ X 9’
240°/TT 270°/TQ 360°/F
15’
10’ Radius
12’ Radius
15’ Radius
Side and Corner Strips
Model Radius Model PSI GPM Radius Model PSI GPM Radius Model PSI GPM Radius Model PSI GPM Radius Model PSI GPM Radius (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) PSI GPM (ft) 20 0.35 14.0 20 0.24 11.5 20 0.62 4x28 20 0.16 9.5 20 0.10 7.6 20 0.04 4.7 ™ 30 0.39 15.0 30 0.25 12.0 30 0.17 10.0 30 0.11 8.0 30 0.04 5.0 4X30 30 0.66 4x30 15-60 12-60 10-60 8-60 5-60 SST 40 0.67 40 0.40 15.1 40 0.26 12.1 4x30 40 0.18 10.0 40 0.12 8.1 40 0.04 5.0 ™ 50 0.42 15.3 PERFORMANCE 0.28 12.2 50 0.68 DATA 4x30– PRECISION™ SERIES SPRAY NOZZLES 50 PERFORMANCE 0.19 10.0 50 0.13 8.3 50 0.05 5.3 DATA 50 – PRECISION SERIES SPRAY NOZZLES 20 0.53 14.2 20 0.32 4x15 20 0.26 9.5 20 0.14 7.0 20 0.06 4.6 20 0.34 12.0 Precip. 4x15 Precip. Precip. Precip. Precip. 30 0.58 Precip. Precip. Precip. Precip. 15.0 0.33 30 0.23 model 10.0 # 30 0.17 8.0 30 0.06 5.0 30 0.37 Precip. 12.1 4X15 30 model # model # model # model Rate # Model model # 15-Q 12-Q 10-Q Radius 8-QModel 5-Q Model Radius Radius Radius Model Radius psi gpm Ratepsi gpm RateRadius gpm Radius RateRadius Arc psi gpm Radius Rate Rate Model Radius ArcRadius Rate psi Rate psi gpm Rate Rate LCS 40 0.60 15.1 40 0.34 4x15 40 0.28 10.2 40 0.18 8.2 40 0.06 5.0 40 0.39 11.4 (O-XX-XX) (O-XX-XX) (O-XX-XX) (O-XX-XX) (O-XX-XX) PSI GPM PSI GPM (O-XX-XX) PSI n GPM PSI GPM n (in./hr.) PSI GPM PSI GPM n (in./hr.) (in./hr.) (in./hr.) (in./hr.) (in./hr.) (in./hr.) (O-XX-XX) (ft) 4x15(O-XX-XX) n (in./hr.) (in./hr.) (ft) n (in./hr.) (O-XX-XX) (ft) (O-XX-XX) (ft) 50 0.61 15.3 50 0.34 50(ft)0.28 (O-XX-XX) 10.3 50 0.18 8.4 50 0.07 5.0 50 0.39 12.0 (ft) 20 0.10 7.620 0.32 1.0 204x15 1.2 4.7 20 0.16 9.5 20 0.04 1.0 20 0.72 14.3 20 0.31 9.5 20 0.20 7.6 20 0.07 4.4 20 4.7 0.46 11.5 1.0 1.2 0.04 1.2 201.0 0.35 14.0 1.0 20 0.101.2 7.6 20 0.24 11.5 20 0.62 4x28 2030 0.16 9.5 1.2 30 20 8.0 0.10 7.6 20 30 0.04 4.7 0.77 15.0 30 0.34 10.0 30 0.22 0.09 5.0 0.49 12.0 4X15 8.030 0.33 30 0.11 1.0 304x15 1.1 5.0 10.0 1.0 30 0.11 1.1 8.0 30 0.04 5.0 1.0 1.2 1.0 1.1 0.04 1.0 30 0.17 1.2 15-T 10-T 5-T 12-T 8-60 30 10-60 5-60 8-60 5-60 RCS 40 0.81 15.3 40 0.34 4x15 40 10.0 0.09 5.2 40 0.51 12.2 30 0.39 15.0 0.25 12.0 30 0.66 4x30 10-60 30 0.17 10.0 8.00.36 30 400.04 5.0 8-T 40 0.2330 8.2 0.11 4X30 60º 40 0.1260º 8.1 1.1 40 0.04 1.2 5.0 10.0 1.0 40 1.2 8.1 40 0.04 5.0 1.0 1.2 0.12 1.1 1.2 1.0 40 0.18 1.2 15-60 12-60 8-60 50 0.82 15.4 50 0.34 4x15 50 0.37 10-60 10.0 50 0.24 8.3 50 0.09 5.4 50 0.52 12.3 50 0.13 1.1 50 0.05 1.3 5.3 50 0.19 10.0 1.3 8.3 50 40 0.05 0.18 5.3 1.010.0 1.1 0.13 1.1 1.3 1.1 401.0 0.40 15.1 1.1 50SST 40 0.268.320 12.1 40 0.67 4x30 40 7.5 0.12 8.1 40 200.04 5.0 20 0.92 14.7 0.36 4X18 20 0.41 9.8 20 0.25 0.07 4.0 20 0.60 11.6 20 0.14 7.0 1.1 20 0.06 20 0.26 9.5 20 0.06 4.6 1.0 1.2 1.1 1.3 1.2 30 0.96 50 15.0 0.37 4X181.3 4.6 30 0.43 10.0 30 0.2750 8.0 0.13 30 0.11 5.0 30 0.19 0.62 12.010.0 4X18 30 12.2 501.0 0.42 15.3 1.0 20 0.141.1 7.0 0.28 50 0.68 4x30 50 8.3 50 0.05 5.3 15-150 10-150 8-150 5-150 12-150 30 0.17 1.0 304X18 1.1 5.0 10.0 1.0 30 0.17 1.2 8.0 30 0.06 5.0 1.0 1.1 40 1.00 1.0 1.1 0.06 1.0 30 0.23 1.1 SST 8.040 0.38 15.2 40 0.44 10.2 40 0.28 8.1 40 0.12 5.2 40 0.63 12.2 8-Q 20 10-Q 5-Q 8-Q 5-Q 201.0 0.53 14.2 20 0.32 4x15 10-Q 20 500.06 4.6 0.34 12.0 40 0.18 1.0 404X18 1.2 5.0 40 0.28 1.2 1.0 40 0.18 1.2 8.2 40 20 0.07 5.0 1.0 9.5 1.2 50 1.10 15.3 507.00.46 10.4 50 0.2920 8.2 0.14 0.13 5.4 50 0.26 0.64 12.3 1.0 1.2 0.07 1.2 90º 90º 8.250 0.38 14.5 0.18 20 20 0.2630 7.0 0.17 0.10 4.4 20 0.23 0.70 11.5 50 0.18 1.0 50 4X9 1.1 5.0 50 0.28 1.3 1.2 8.4 50 30 0.07 5.0 1.010.0 1.2 20 1.10 30 0.18 1.0 1.1 0.07 1.2 301.0 0.58 15.0 1.0 50 30 0.33 4x15 8.00.48 9.7 30 200.06 5.0 0.378.420 12.1 4X15 1.16 15.0 30 0.51 10.0 30 0.33 8.0 30 0.13 5.0 0.74 12.0 15-Q 12-Q 10-Q 20 0.0730 4.4 8-Q 4X9 7.630 0.19 20 0.20 1.0 20 4X9 1.2 4.4 20 0.31 9.5 1.1 7.6 1.0 1.2 30 0.07 1.2 0.20 1.0 1.2 15-H 10-H 5-H 401.0 0.60 15.1 1.0 20LCS 40 0.34 4x15 4040 0.28 8.20.55 10.3 12-H 40 400.06 5.0 8-H 40 0.3440 8.0 0.18 LCS 40 11.4 40 1.25 40 15.4 0.39 0.20 4X9 40 0.14 5.1 0.79 12.310.2 30 0.22 8.0 1.0 30 0.09 1.1 5.0 10.0 1.0 30 0.22 1.1 8.0 30 0.09 5.0 1.0 1.2 1.0 30 0.34 1.2 1.0 1.1 50 1.28 15.5 50 0.20 4X9 50 0.56 10.4 50 0.34 8.0 50 0.14 5.2 50 0.80 12.4 8-T 10-T 5-T 5-T 8-T 50 0.61 15.3 50 0.34 4x15 10-T 50 0.28 10.3 50 0.18 8.4 50 0.07 5.0 5040 0.23 0.39 12.0 1.0 40 0.09 10.0 1.0 40 0.23 1.2 8.2 40 0.09 5.2 1.0 1.2 1.0 40 0.36 1.2 1.0 1.1 120º 8.220 0.18 20 1.15 14.5 4X9 1.1 5.2 20 120º 0.56 9.8 20 0.33 7.6 20 0.10 4.4 20 0.76 11.6 50 0.24 1.0 50 4X9 1.1 5.4 50 0.37 10.0 50 20 0.10 5.4 1.0 9.5 1.1 30 1.20 20 0.10 1.1 1.0 1.1 201.0 0.72 14.3 1.1 50 0.241.2 8.3 20 0.32 4x15 20 300.07 4.4 0.46 15.0 0.19 307.60.58 10.0 30 0.3620 8.0 0.20 0.15 5.2 30 0.31 0.82 12.0 4X9 8.330 11.5 15-210 10-210 8-210 5-210 12-210 RCS 7.540 0.20 20 0.25 1.0 20 4X9 1.2 4.0 20 0.41 9.8 1.1 7.5 20 0.07 4.0 1.0 1.30 15.5 40 0.37 8.1 0.16 5.3 0.84 12.3 0.25 1.0 1.2 0.07 1.2 301.0 0.77 15.0 1.0 20 30 0.33 4x15 3040 0.34 10.0 1.2 40 30 8.2 0.22 40 8.00.60 10.4 30 40 0.09 5.0 30 0.49 12.0 4X15 1.40 15.6 50 0.62 10.5 50 0.38 50 0.17 5.5 50 5.0 0.85 12.4 30 0.27 8.050 0.20 1.0 30 4X9 1.1 5.0 10.0 1.0 30 0.27 1.1 8.0 30 0.11 1.0 1.2 50 1.0 1.1 0.11 1.0 30 0.43 1.2 15-T 10-T 8-T 12-T 8-150 14.5 0.51 10-150 5-150 8-150 5-150 RCS1.1 8.1 20 0.63 9.6 20 0.3440 7.0 0.23 401.0 0.81 15.3 0.14 4.3 20 0.36 0.90 11.4 40 0.34 4x15 10-150 8.2150º 40 200.09 5.2 12.2 40 0.28 1.0 40 0.12 1.1 5.2 40 0.44 10.2 1.0 40 0.28 40 40 0.12 5.2 1.010.0 1.2 20 1.45 40 1.0 1.1 1.2 150º 8.1 30 1.54 15.0 30 0.69 10.0 30 0.44 8.0 0.17 5.0 30 0.99 12.0 50 0.29 8.2 1.0 50 0.13 1.2 5.4 50 0.46 10.4 1.0 50 0.29 1.1 8.2 50 50 0.13 0.37 5.4 1.010.0 1.2 15-TT 10-TT 8-TT 5-TT 12-TT 1.0 1.2 1.0 0.82 1.2 50 15.4 50 0.34 4x15 50 0.24 8.3 50 30 0.09 5.4 50 0.52 12.3 40 1.58 15.2 40 0.73 10.3 40 0.46 8.0 40 0.19 5.0 40 1.04 12.3 20 0.26 7.0 1.0 20 0.10 1.2 4.4 20 0.48 9.7 20 0.10 4.4 1.0 1.2 1.2 1.0 1.2 50 1.61 20 15.3 507.50.74 10.4 50 0.4620 8.0 0.25 0.19 5.0 1.05 12.4 9.8 201.0 0.92 14.7 1.0 20 0.261.1 7.0 20 0.36 4X18 2050 0.41 20 500.07 4.0 0.60 Precipitation11.6 rate (50% 30 0.33 1.01” 1.1 5.0 10.0 1.0 30 0.33 1.1 8.0 30 0.13 1.0 1.2 20 1.72 30per0.13 1.0 30 0.51 1.2 1.0 1.1 14.5 20 0.71 9.5 20 0.41 7.2 20 0.15 4.3 20 5.0 1.05 11.4 square8.0spacing): 8-H 10-H 5-H 5-H 8-H 301.0 0.96 15.0 30 0.37 4X18 10-H 8.0180º 30 300.11 5.0 0.62 12.0 4X18 40 0.34 8.0 after 1.0 1.2 5.1 40 0.55 10.3 1.0 40 1.2 8.0 40 30 0.14 5.1 1.010.0 1.2 30 1.78 30 hour even radius 15.0 30 0.79 10.0 30 0.4930 8.0 0.27 0.20 5.0 30 0.43 1.15 12.0 40 0.14 1.2 0.34 1.0 1.2 180º 15-150 10-150 15-TQ 12-150 10-TQ 8-TQ8-150 5-TQ 12-TQ reduction 20%. 15.0 408.10.84 10.3 40 0.5440 8.0 0.28 0.21 5.0 40 0.44 1.19 12.2 50 0.34 8.0 of12.2 1.0 50 0.14 1.2 5.2 50 0.56 10.4 1.2 8.0 50 40 0.14 5.2 1.010.2 1.1 40 1.82 40 401.0 1.00 15.2 1.0 50SST 1.1 0.34 1.0 1.2 40 0.38 4X18 40 400.12 5.2 0.63 15.3 50 0.86 10.4 50 0.55 8.0 50 0.22 5.0 50 4.4 1.22 12.3 20 0.33 7.6 1.1 20 0.10 1.3 4.4 9.8 20 0.10 1.0 1.2 50 1.90 1.2 1.1 1.3 501.0 20 1.100.56 15.3 1.1 20 0.331.3 7.6 50 0.38 4X18 50 0.46 10.4 50 0.29 8.2 50 200.13 5.4 50 0.64 12.3 20 2.20 14.5 20 0.95 9.6 20 0.55 7.0 0.17 4.0 20 1.35 11.5 30 0.36 8.0 1.1 30 0.15 1.3 5.2 30 0.58 10.0 1.1 30 0.36 1.3 8.0 30 0.15 5.2 1.1 1.2 1.1 1.2 1.1 1.3 30 2.31 15.0 0.70 307.01.03 10.0 0.26 5.0 30 1.48 12.0 9.7 8-210 20 10-210 5-210 5-210 8-210 201.1 40 1.100.60 14.5 20 0.18 4X9 10-210 20 300.10 4.4 8-F 30 0.6620 8.0 0.26 11.5 15-F 10-F 5-F 12-F 40 0.37 8.1 1.1 40 0.16 1.3 5.3 10.4 1.1 40 0.37 1.2 8.1 40 20 0.16 0.48 5.3 1.1 1.3 1.3 1.1 1.3 40 2.35 15.2 40 210º 1.08 10.3 40 0.68 8.0 40 0.26 5.0 40 1.59 12.4 210º 50 0.38 1.1 50 0.17 1.3 5.5 0.62 10.5 1.3 8.2 50 30 0.17 5.5 1.110.0 1.3 50 2.40 30 301.1 50 1.16 15.0 1.1 504X9 30 0.19 4X9 1.3 0.38 1.1 1.3 8.01.12 10.4 30 500.13 5.0 0.748.2 12.0 15.3 50 50 0.7130 8.0 0.33 0.26 5.0 50 0.51 1.60 12.5
PRECISION SERIES SPRAY NOZZLES 5’ Radius Model (O-XX-XX) 5-60
5-Q
5-T
10’ Radius
12’ Radius
5' PRECISION MALE
15’ Radius
8' TORO PRECISION
O-560
OT-560
60°
O-860
OT-860
90°
O-5Q
OT-5Q
90°
O-8Q
OT-8Q
120°
O-5T
OT-5T
120°
O-8T
OT-8T
150°
O-5150
OT-5150
150°
O-8150
OT-8150
O-5H
OT-5H
180°
O-8H
OT-8H
210°
O-5210
OT-5210
210°
O-8210
OT-8210
240°
O-5TT
OT-5TT
240°
O-8TT
OT-8TT
40 0.14 5.1 270° O-5TQ
50 0.14 5.2 360° 20 0.10O-5F 4.4 30 0.15 5.2 5-210 40 0.16 5.3 50 0.17 5.5 20 0.14 4.3 30 0.17 5.0 5-TT 40 0.19 5.0 50 0.19 5.0 20 0.15 4.3 30 0.20 5.0 5-TQ 40 0.21 5.0 50 0.22 5.0
10-H 20 0.14 4.3 40 0.55 8.0 30 0.17 5.0 5-TT 50 0.34 8.0 40 50 0.19 0.56 5.0 240º 50 20 0.19 0.56 5.0 OT-5F 20 0.33 7.6 20 0.15 4.3 30 0.58 30 0.36 8.0 30 0.20 5.0 10-210 8-210 5-TQ 40 0.37 8.1 40 40 0.21 0.60 5.0 270º 50 50 0.22 0.62 5.0 50 0.38 8.2 20 0.17 4.0 20 0.63 20 0.34 7.0 30 0.26 5.0 5-F 30 0.69 30 0.44 8.0 10-TT 40 0.26 5.0 8-TT 360º 50 40 0.26 0.73 5.0 40 0.46 8.0 50 0.74 50 0.46 8.0 22 20 0.71 20 0.41 7.2 30 0.79 30 0.49 8.0 C-Sprays-2018-2019.indd 22 10-TQ 8-TQ 40 0.84 40 0.54 8.0 50 0.86 50 0.55 8.0 8-H
40 0.34 OT-5TQ
15-H 12-H 20 0.34 1.0 20 0.14 1.2 4.3 20 0.63 1.3 401.1 1.25 10.3 1.3 40 0.797.0 O-8TQ 12.3 270° OT-8TQ 30 0.44 8.0 1.0 30 0.17 1.1 5.0 1.1 1.0 30 0.69 1.1 8-TT 10-TT 5-TT 501.1 1.28 5040 0.46 0.808.0 12.4 1.0 40 0.19 1.2 5.0 40 0.73 1.110.4 1.2 1.2 240º 360° OT-8F 50 0.46 1.0 50 0.19 1.2 5.0 1.1 9.8 1.3 201.1 50 1.150.74 1.3 20 0.768.0 O-8F 11.6 1.0 20 0.15 1.1 4.3 20 0.71 1.0 1.2 301.0 1.20 10.0 1.2 3020 0.41 0.827.2 12.0 30 0.49 8.0 1.1 30 0.20 1.1 30 0.79 1.0 1.2 12-210 15-210 5.0 1.0 1.2 8-TQ 40 10-TQ 401.1 1.30 0.848.0 5-TQ 12.3 40 0.54 1.1 40 0.21 1.2 5.0 40 0.84 1.110.4 1.2 1.2 270º 8.0 1.1 50 0.22 1.2 5.0 50 0.86 1.110.5 1.3 501.1 1.40 5050 0.55 0.85 12.4 1.3 1.1 20 0.17 1.2 4.0 20 0.95 1.0 1.2 201.0 1.45 9.6 1.2 2020 0.55 0.907.0 11.4 30 0.66 8.0 1.0 30 0.26 1.1 5.0 30 1.03 1.0 1.2 1.0 1.2 8-F 30 10-F 301.0 1.54 10.0 1.2 0.998.0 5-F 12.0 40 0.68 1.0 40 0.26 1.2 5.0 40 1.08 1.0 1.2 15-TT 12-TT 360º 8.0 1.1 50 0.26 1.2 5.0 50 1.12 1.010.3 1.2 401.0 1.58 4050 0.71 1.04 12.3 1.2 50 1.61 10.4 50 1.05 12.4 22 20 1.72 9.5 20 1.05 11.4 30 1.78 10.0 30 1.15 12.0 15-TQ 12-TQ C-Sprays-2018-2019.indd 22 40 1.82 10.3 40 1.19 12.2 50 1.90 10.4 50 1.22 12.3 1.1
1.0
Side and Corner Strips
8' PRECISION MALE
60°
5-150 180°
5-H
8’ Radius
5' PRECISION
psi gpm R 20
0.16
30
0.17
40
0.18
50
0.19
20
0.26
30
0.23
40
0.28
50
0.28
20
0.31
30
0.34
40
0.36
50
0.37
20
0.41
30
0.43
40
0.44
50
0.46
20
0.48
30
0.51
40
0.55
50
0.56
20
0.56
30
0.58
40
0.60
50
0.62
9.6
20
0.63
10.0
30
0.69
40
0.73
1.1 7.0 0.34 1.0 1.2 15.4 1.0 20LCS 40 0.20 4X9 1.0 30 0.44 1.2 8.0 1.0 1.1 8-TT 15.5 50 0.20 4X9 10.3 1.0 40 0.46 1.1 8.0 1.0 1.2 10.4 14.5 1.0 50 0.461.1 8.0 20 0.18 4X9 1.0 1.2 9.5 1.1 7.2 0.41 1.0 1.1 15.0 1.0 204X9 30 0.19 4X9 10.0 1.0 30 0.49 1.1 8.0 1.1 1.1 8-TQ RCS1.1 8.0 15.5 40 0.20 4X9 10.3 1.0 40 0.54 1.1 1.2 10.4 15.6 1.0 50 0.551.1 8.0 50 0.20 4X9 1.1 1.2 9.6 1.1 1.2 14.5 1.0 20 0.551.1 7.0 10.0 1.0 30 0.66 1.1 8.0 1.0 1.1 8-F 15.0 10.3 1.0 40 0.68 1.1 8.0 1.0 1.2 10.4 15.2 1.0 50 0.711.2 8.0 1.1 1.2 15.3 Precipitation rate (50% 14.5 square spacing): 1” per hour even after radius 15.0 6/20/18 10:43 AM reduction of 20%. 15.0 15.3
10-TT
10-TQ
50
0.74
20
0.71
30
0.79
40
0.84
50
0.86
20 10-F
0.95
30
1.03
40
1.08
50
1.12
65
5’
8’
10’
12’
15’
PRECISION™ SERIES PERFORMANCE DATA
PERFORMANCE DATA – PRECISION™ SERIES SPRAY NOZZLES
RECISION™ SERIES SPRAY NOZZLES
adius
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
4.7
1.0
1.2
5.0
1.0
1.2
5.0
1.0
1.2
5.3
1.0
1.1
4.6
1.0
5.0
1.0
1.1
5.0
1.0
1.2
5.0
1.0
1.2
4.4
Precip. Precip. Precip. model # 10' 10'Precip. Rate Rate psi gpm Radius Rate Rate (O-XX-XX) n (in./hr.) (in./hr.) n (in./hr.) (in./hr.) PRECIPRECI20 0.10 7.6 1.0 1.2 20 0.16 9.5 1.0 1.2 30 0.11 8.0 1.0 30 0.17 10.0 1.0 1.1 SION1.1 8-60SION 10-60 40 0.12 8.1 1.1 1.2 40 0.18 10.0 1.0 1.2 MALE 50 0.13 8.3 1.1 1.3 50 0.19 10.0 1.1 1.3 20
1.2 8-Q
0.14
7.0
1.1
1.3
30
0.17
8.0
1.0
1.1
40
0.18
8.2
1.0
1.2
50
0.18
8.4
1.0
1.1
20
0.20
7.6
1.0
1.2
30
0.22
8.0
1.0
1.1
1.0
1.2
5.0
1.0
5.2
1.0
60° 1.2
8-T O-1060 40 0.23 8.2 OT-1060 1.0 1.1
5.4
1.0
1.1
4.0
1.0
90° 1.2
O-10Q 20 0.25 7.5 OT-10Q 1.0 1.2
5.0
1.0
1.2
5.2
1.0
5.4
1.0
4.4
1.0
5.0
1.0
5.1
1.0
5.2
1.0
1.2
1.1
1.0
1.2
1.0
1.2
50
0.28
1.3
1.0
1.2
20
0.31
30
0.34
10.0
1.0
1.1
40
0.36
10.0
1.0
1.2
0.37
1.1
50
10.0
1.1
1.2
20
0.41
9.8
1.0
1.1
1.1
30
0.43
10.0
1.0
1.1
40
0.44
10.2
1.0
1.1
50
0.46
10.4
1.0
1.1
20
0.48
9.7
1.0
1.1
0.29
8.2
1.0
10-150
1.2
0.33
8.0
1.0
1.1
1.1
5.5
1.1
4.3
1.1
8-210
40 0.37 8.1 1.1 1.3 1.3 240° O-10TT OT-10TT 50 0.38 8.2 1.1 1.3 1.3
270° O-10TQ OT-10TQ 30 0.44 8.0 1.0 1.1 1.1 20
0.34
7.0
1.0
10-H
10-210
1.2
30
0.51
10.0
1.0
1.1
40
0.55
10.3
1.0
1.2
50
0.56
10.4
1.0
1.2
20
0.56
9.8
1.1
1.3
30
0.58
10.0
1.1
1.3
40
0.60
10.4
1.1
1.2
50
0.62
10.5
1.1
1.3
20
0.63
9.6
1.0
1.1
30
0.69
10.0
1.0
1.2
40
0.73
10.3
1.0
1.1
50
0.74
10.4
1.0
1.1
9.5
1.0
1.1
10.0
1.0
1.1
5.0
1.0
5.0
1.1
5.0
1.1
4.3
1.0
1.2
20
0.41
7.2
1.0
1.1
20
0.71
5.0
1.0
1.2
30
0.49
8.0
1.1
1.1
30
0.79
360° O-10F 50 0.46 8.0 OT-10F 1.0 1.2 1.3 40
8-TQ
0.46
8.0
1.0
1.2
10-TT
10-TQ
40
0.54
8.0
1.1
1.2
40
0.84
10.3
5.0
1.1
1.3
50
0.55
8.0
1.1
1.2
50
0.86
10.4
1.0
1.1
4.0
1.0
1.2
20
0.55
7.0
1.1
1.2
20
0.95
9.6
1.0
1.1
5.0
1.0
1.2
30
0.66
8.0
1.0
1.1
30
1.03
10.0
1.0
1.1
5.0
1.0
1.2
40
0.68
8.0
1.0
1.2
40
1.08
10.3
1.0
1.1
5.0
1.0
1.2
50
0.71
8.0
1.1
1.2
50
1.12
10.4
1.0
1.2
5.0
1.1
1.2
8-F
10-F
1.0
12' PRECISION MALE
model # psi gpm Radius (O-XX-XX)
Arc
12-60
60º
12-Q
90º
1.1
1.0
30
8-TT
1.0
1.0
5.3
1.2
9.5
8.0
40 0.34 8.0 1.0 1.2 1.2 180° O-10H OT-10H 50 0.34 8.0 1.0 1.2 1.1
1.3
1.0
1.2
8.3
50
8-H
9.5 10.0
0.28
0.24
20 0.26 7.0 OT-10150 1.0 1.2 1.2 150° O-10150 1.2
0.26 0.23
0.27
5.2
1.0
10-T
20 30 40
50
8-150 40 0.28 8.1 OT-10T 1.0 1.1 1.2 120° O-10T 1.2
10-Q
30
20 0.33 7.6 1.1 1.3 1.2 210° O-10210 OT-10210 30 0.36 8.0 1.1 1.3 1.1 1.2
4.4
12' PRECISION
model # psi gpm Radius (O-XX-XX)
60°
O-1260
OT-1260
90°
O-12Q
OT-12Q OT-12T
120°
O-12T
150°
O-12150 OT-12150
180°
O-12H
OT-12H
210°
O-12210
OT-12210
240°
O-12TT
OT-12TT
270°
O-12TQ
OT-12TQ
360°
O-12F
OT-12F
Five Radii Available in Toro (Male) & Female Threads
5’
8’
1.1
SPRAYS
15' PRECISION
12-T
120º
12-150
150º
12-H
180º
12-210 210º
15' PRECISION MALE
20
0.35
1
30
0.39
1
40
0.40
1.3
50
0.42
1
1.2
20
0.53
1
1
20
0.24
11.5
1.0
1.2
30
0.25
12.0
1.0
1.2
40
0.26
12.1
1.0
1.2
50
0.28
12.2
1.1
20
0.34
12.0
1.0
30
0.37
12.1
1.0
1.1
40
0.39
11.4
1.0
1.2
50
0.39
12.0
1.0
1.1
20
0.46
11.5
1.0
1.2
30
0.49
12.0
1.0
1.1
40
0.51
12.2
1.0
1.1
50
0.52
12.3
1.0
1.1
20
0.60
11.6
1.0
1.2
30
0.62
12.0
1.0
1.1
40
0.63
12.2
1.0
1.1
50
0.64
12.3
1.0
20
0.70
11.5
1.0
30
0.74
model # psi gpm Ra (O-XX-XX)
15-60
15-Q
12-TT 240º
12’
30
0.58 0.60
1
50
0.61
1
0.72
1
20 30
0.77
1
40
0.81
1
50
0.82
1
20
0.92
30
0.96
1
40
1.00
1
1.1
50
1.10
1
1.2
20
1.10
1
15-T
15-150
12.0
1.0
1.1
1.16
1
0.79
12.3
1.0
1.2
40
1.25
1
50
0.80
12.4
1.0
1.2
50
1.28
1
20
0.76
11.6
1.1
1.3
20
1.15
1
12.0
1.1
15-H
1.3
30
30
0.82
40
0.84
12.3
1.1
1.2
40
1.30
1
50
0.85
12.4
1.1
1.2
50
1.40
1
20
0.90
11.4
1.0
1.2
20
1.45
1
30
0.99
12.0
1.0
1.1
30
1.54
1
40
1.04
12.3
1.0
1.1
40
1.58
1
20
1.05
1.0
30
1.15
1.0
40
11.4 4’ X 15’ 12.0 4’ X 9’ 1.19 LCS 12.2
1.0
50 12.3Strip) 1.0 (Left1.22 Corner
15’ 12-F 360º
1
40
15-210
15-TT
60° 50 1.0590°12.4 120°1.0 150° 1.1 180°
270º
1
40
30
Nine Arcs, Plus Side and Center Strips Available
12-TQ
10’
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
1.20
1
210°
240° 50 1.61 27 1
4’ X 30’ 1.2 4’ X 18’ 15-TQ 1.2 SST
1.72 1 4’ X 1 1.78 4’ X1 40 RCS 1.82 1
1.2
1.2Strip) (Side
20
1.35
11.5
1.0
1.1
30
1.48
12.0
1.0
1.1
40
1.59
12.4
1.0
1.1
50
1.60
12.5
1.0
1.1
20
30
50Corner 1.90 Str 1 (Right 20 15-F
2.20
1
30
2.31
1
40
2.35
1
50
2.40
1
PERFORMANCE DATA – PRECISION™ SERIES SPRAY NOZZLES 6/20/18 10:43 AM
Toro ds
Precip. Precip. model # 60° Arc (O-XX-XX) O-1560 psi gpm Radius OT-1560 Rate Rate
90°
Nine Arcs, Plus Side and Center Strips Available
120°60º 60°
5’
8’
90°
120°
150°
180°
4’ X 15’ 4’ X 9’
10’
240°
4’ X 30’ 4’ X 18’
LCS (Left Corner Strip)
12’
210°
SST (Side Strip)
270°
360°
150° 180°90º
4’ X 15’ 4’ X 9’
RCS (Right Corner Strip)
15’
n (in./hr.) (in./hr.)
O-15Q 20 0.24 11.5 OT-15Q 1.0 1.2 50
24
11.5
1.0
1.2
25
12.0
1.0
1.2
26
12.1
1.0
1.2
28
12.2
1.1
1.3
34
37
12.0
1.0 1.0
1.1
39
11.4
1.0
1.2
39
12.0
1.0
1.1
1.0
1.2
46
11.5
49
12.0
51
12.2
52
12.3
60
11.6
62
12.0
63
12.2
64
12.3
1.0
1.1
1.0
1.2
4'1.0x 15'1.1LCS
4'1.0x 15'1.1RCS 1.0 1.1 4'1.0 x 18'1.1 SST 1.2 4'1.0 x 9' LCS 1.0 1.1
11.5
74
12.0
79
12.3
80
12.4
76
11.6
1.1
4'1.0x 9' RCS 1.2 1.0
1.2
82
12.0
1.1
1.3
12.3
1.1
1.2
85
12.4
1.1
90
11.4
99
05
15
15-Q
1.0
1.2
15.3
1.0
1.2
0.53
30
0.58
40 50 20
14.2
1.0
15.0
1.0
1.1
0.60
15.1
1.0
1.2
0.61
15.3
1.0
1.2
0.72
14.3
1.0
1.2
40
0.81
15.3
1.0
1.2
20
0.92
14.7
1.0
1.2
O-15RCS OT-15RCS 30 0.96 15.0 1.0 1.2
15-150
40 1.00 15.2 1.0 1.2 O-18SST OT-18SST 50 1.10 15.3 1.1 1.3 20 1.10 14.5 1.0 1.2 O-9LCS OT-9LCS 30 1.16 15.0 1.0 1.1
15-H
O-9RCS OT-9RCS 50 1.28 15.5 1.0 1.2 40 20
1.25
15.4
1.0
1.2
1.15
14.5
1.1
1.2
30
1.20
15.0
1.0
1.2
40
1.30
15.5
1.0
1.2
1.2
50
1.40
15.6
1.1
1.3
1.0
1.2
20
1.45
14.5
1.0
1.2
12.0
1.0
1.1
30
1.54
15.0
1.0
1.1
40
1.58
15.2
1.0
1.1
50
1.61
15.3
1.0
1.1
66
15-210
15-TT
4X30 SST
1.2
O-15LCS 50 0.82 15.4 OT-15LCS 1.0 1.2
1.3
84
05
15.1
0.42
4'1.0x 30'1.1SST 15-TO-30SST 30 0.77 15.0 OT-30SST 1.0 1.1
70
04
0.40
50 20
1.2
12.1
40
Arc
12.3
1.0
1.1
12.4
1.0
1.1
11.4
1.0
1.2
20
1.72
14.5
1.0
1.2
12.0
1.0
1.2
30
1.78
15.0
1.0
1.1
4X15 LCS
4X15 RCS
4X18 SST
4X9 LCS
4X9 RCS
psi
gpm 0.62
4x28
1.0
1.1
30
0.66
4x30
1.1
1.2
40
0.67
4x30
1.1
1.2
50
0.68
4x30
1.1
1.3
20
0.32
4x15
1.0
1.2
30
0.33
4x15
1.1
1.2
40
0.34
4x15
1.1
1.2
50
0.34
4x15
1.1
1.3
20
0.32
4x15
1.0
1.2
30
0.33
4x15
1.1
1.2
40
0.34
4x15
1.1
1.3
50
0.34
4x15
1.1
1.3
20
0.36
4x18
1.0
1.1
30
0.37
4x18
1.0
1.1
40
0.38
4x18
1.0
1.2
50
0.38
4x18
1.0
1.2
20
0.18
4x9
1.0
1.2
30
0.19
4x9
1.0
1.2
40
0.2
4x9
1.1
1.2
50
0.2
4x9
1.1
1.1
20
0.18
4x9
1.0
1.2
30
0.19
4x9
1.0
1.2
40
0.2
4x9
1.1
1.2
50
0.2
4x9
1.1
1.2
0.28
12.2
1.1
30
0.37
12.1
1.0
1.1
50
0.39
12.0
1.0
1.1
240° 120º
180º
20 15-60
1.3
12-T
Precip. Precip. Radius Rate Rate n (in./hr.) (in./hr.)
20
1.2
O-15H 40 0.39 11.4 OT-15H 1.0 1.2
12-Q
30
0.49
12.0
1.0
1.1
50
0.52
12.3
1.0
1.1
O-15TT 40 0.51 12.2 OT-15TT 1.0 1.1
15-Q
15-T
O-15TQ 20 0.60 11.6 OT-15TQ 1.0 1.2
12-H
12-210 210º
12-TT 240º
12-TQ 270º
360º
C-Sprays-2018-2019.indd 23
0.35
14.0
1.0
1.2
30
0.39
15.0
1.0
1.2
40
0.40
15.1
1.0
1.2
50
0.42
15.3
1.0
1.2
20
0.53
14.2
1.0
1.2
30
0.58
15.0
1.0
1.1
40
0.60
15.1
1.0
1.2
50
0.61
15.3
1.0
1.2
20
0.72
14.3
1.0
1.2
30
0.77
15.0
1.0
1.1
40
0.81
15.3
1.0
1.2
50
0.82
15.4
1.0
1.2
20
0.92
14.7
1.0
1.2
30
0.96
15.0
1.0
1.2
0.62
12.0
1.0
1.1
40
1.00
15.2
1.0
1.2
50
0.64
12.3
1.0
1.1
50
1.10
15.3
1.1
1.3
20
0.70
11.5
1.0
1.2
20
1.10
14.5
1.0
1.2
30
0.74
12.0
1.0
1.1
30
1.16
15.0
1.0
1.1
15-150
15-H
gpm
Radius
Pre Ra n (in
20
0.62
4x28
1.
30
0.66
4x30
1.
40
0.67
4x30
1.
50
0.68
4x30
1.
20
0.32
4x15
1.
1.
Arc
psi
4X30 SST
4X15 LCS
4X15 RCS
4X18 SST
4X9 LCS
30
0.33
4x15
40
0.34
4x15
50
0.34
4x15
1.
20
0.32
4x15
1.
30
0.33
4x15
1.
40
0.34
4x15
1.
50
0.34
4x15
1.
20
0.36
4x18
1.
1.
30
0.37
4x18
1.
40
0.38
4x18
1.
50
0.38
4x18
1.
20
0.18
4x9
1.
40
0.79
12.3
1.0
1.2
40
1.25
15.4
1.0
1.2
30
0.19
4x9
1.
50
0.80
12.4
1.0
1.2
50
1.28
15.5
1.0
1.2
40
0.2
4x9
1.
20
0.76
11.6
1.1
1.3
20
1.15
14.5
1.1
1.2
50
0.2
4x9
1.
30
0.82
12.0
1.1
1.3
30
1.20
15.0
1.0
1.2
20
0.18
4x9
1.
15-210
40
0.84
12.3
1.1
1.2
40
1.30
50
0.85
12.4
1.1
1.2
50
1.40
15.6
1.1
1.3
20
0.90
11.4
1.0
1.2
20
1.45
14.5
1.0
1.2
30
0.99
12.0
1.0
1.1
30
1.54
15.0
1.0
1.1
40
1.04
12.3
1.0
1.1
40
1.58
15.2
1.0
1.1
50
1.05
12.4
1.0
1.1
50
1.61
15.3
1.0
1.1 1.2
20
1.05
11.4
1.0
1.2
30
1.15
12.0
1.0
1.2
40
1.19
12.2
1.0
1.2
1.22
15-TT
15-TQ
15.5
1.0
1.2
20
1.72
14.5
1.0
30
1.78
15.0
1.0
1.1
40
1.82
15.0
1.0
1.2
12.3
1.0
1.2
50
1.90
15.3
1.0
1.2
20
1.35
11.5
1.0
1.1
20
2.20
14.5
1.0
1.2
30
1.48
12.0
1.0
1.1
30
2.31
15.0
1.0
1.1
40
1.59
12.4
1.0
1.1
40
2.35
15.2
1.0
1.1
50
1.60
12.5
1.0
1.1
50
2.40
15.3
1.0
1.1
50
12-F
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
30
O-15F 40 0.63 12.2 OT-15F 1.0 1.1
12-150
– PRECISION SERIES SPRAY NOZZLES
SPECIAL SPECIAL PATTERN PATTERN 20 0.35 14.0 1.0 1.2 30 0.39 15.0 1.0 MALE1.2 15-60
1.0
O-15210 20 0.46 11.5 OT-15210 1.0 1.2
360° 150º Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
12.0
model # psi gpm Radius (O-XX-XX)
O-15150 20 0.34 12.0 OT-15150 1.0 1.2
™
model # psi gpm Radius (O-XX-XX)
0.25
210° 270°
Precip. Precip. m Radius Rate Rate n (in./hr.) (in./hr.)
30
O-15T 40 0.26 12.1 OT-15T 1.0 1.2
12-60
C-Sprays-2018-2019.indd 23
15-F
4X9 RCS
30
0.19
4x9
1.
40
0.2
4x9
1.
50
0.2
4x9
1.
MP ROTATOR STREAM ROTOR The MP Rotator, a revolutionary irrigation solution, employs a unique rotating stream delivery system for water conservation. Unlike traditional sprays, it releases multiple streams steadily, allowing water to gently soak into the soil. This method achieves even distribution, reducing water usage by 30% compared to traditional sprays and minimizing wasteful runoff. Easily installed on any spray head body or shrub adapter, the MP Rotator transforms them into efficient, low precipitation rate sprinklers with matched precipitation at any arc and radius.
8' - 15' - 21' GUIDE MP ROTATOR13' DESIGN MP ROTATOR DESIGN GUIDE
6' - 10'
MP ROTATOR DESIGN GUIDE
MP ROTATOR DESIGN GUIDE MP1000, MP2000,MP1000, MP3000,MP2000, MP3500 MP3000, M
MP800 Series
MP1000, MP2000, MP3000, MP3500
90° - 210°
210° - 270° 360°
MP800SR
MP ROTATOR PERFORMANCE DATA
MP ROTATOR PERFORMANCE DATA 90° - 210° MP1000 MP1000
MP800 -
210° - 270°
MP800-360
360°
Radius: 6' to 12' Adjustable Arc and Full–Circle Orange and Gray: 90° to 210° Lime Green and Gray: 360°
MAX RADIUS Arc
Pressure PSI
Radius Flow GPM ft.
MIN RADIUS Flow GPH
MP ROTATOR PERFORMANCE DATA
MP ROTATOR PERFORMANCE DATA
MP ROTATOR PERFORMANCE DATA
Precip in/hr
90° - 210°
MP815
MP2000 MP1000 MP2000
Radius:13'8'to to21' 15' Radius: 8' to 15' Radius: MP2000 MP3000 Radius: 8' to 16' AdjustableArc Arc andFull-Circle Full-Circle Adjustable ArcFull–Circle and Full-Circle Adjustable and Radius: 8' to 15' Adjustable Radius: 13' to 21' Radius: 22' to 30' Arc and Maroon: to 210°Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Maroon: 90° 90° to 210° Black: 90° 90° to 210° Maroon and Gray: to 210° Maroon: 90° to 210° Lt. Blue: 210° to 270°Black: 90° to 210° Blue: 90° to 210° Lt. Blue: 210° to 270° Green: 210° to 270° Lt. Blue and Gray: 210° to 270° Lt. Blue: 210° to 270° Olive: 360° Green: 210° to 270° Olive: 360° Yellow: 210° to 270° Red: 360° Olive and Gray: 360°
MP1000-210
210° - 270°
MP1000-360
360°
MP1000
Olive: 360°
MP2000-360
Red: 360°
Flow Pressure Radius Radius ArcFlowPressureArc Arc Radius RadiusPressure Flow Flow PrecipFlow in/hr ft. ft. GPM ft. GPM PSI GPM ft. PSIPSI GPM GPH
Gray: 360°
MP MP3
Rad Radiu Adj Adju Bl Ye Gr
Flow Precip in/hr Precip Arc Radius Flow Flow Precip in/hr Rad Flow Precip in/hr Radius Flow Radi Radius FlowPressure Flow in/hr Flow Radius Flow Precip Flow in/hr Precip in/hr GPH GPMft. GPH GPH GPH ft.ft. GPM ft.ft ft. GPM PSI GPH GPM GPH
25.2 0.83 25 -- 25 20.4 --0.71 0.45 --0.34 20.4 42.6 0.44 0.51251 -- -- 0.42----- 17 ---0.95 0.45 17--0.52 0.34 0.52 27.6 0.79 0.91 0.45 18120.52 0.38 0.52 0.38 22.8 0.76 0.45 45.6 0.52 0.40 30 0.1727 22.8 10.2 0.45 0.52 0.46271 120.450.46 0.17 10.21890° 0.45 0.52 13 40 0.19 0.50 29.419 0.40 24.0 0.82 0.43 49.2 0.40 0.46 1 0.84 40 10 0.23 0.83 0.96 350.97 0.43 19130.49 0.40 0.1928 24.0 11.4 0.50 0.43 0.49 28 35 130.430.49 0.19 11.4 0.43 0.50 14 45 0.21 0.410.520.48 20 0.43 25.8 0.41 0.48 30 0.86 51.6 0.37 0.42 31.2 0.78 45 11 0.25 0.80 0.92 400.90 0.21 25.8 12.6 0.41 0.41 0.48 0.48 40 14 0.21 12.6 0.41 0.48 2014 0.43 302 14 0.23 0.45 0.52 21 0.46 27.6 0.40 0.46 30 0.90 54.0 0.39 0.44 50 45 33.0 0.83 0.96 50 11 0.27 0.79 0.92 45 14 0.23 13.8 0.45 0.52 2 140.430.55 0.23 13.821 0.45 0.52 15 0.25 0.49 0.47 28.2 0.41 21 0.47 0.46 30 27.60.95 0.40 57.0 0.46 0.41 0.4730 55 50 34.8 0.87 1.01 55 12 0.28 0.80 0.93 50 0.2530 28.2 15.0 0.43 0.49 150.460.58 0.25 15.021 0.43 0.49 15 0.27 0.53 0.48 28.8 0.42 21150.48 0.47 1.01 0.41 60.6 0.47 0.43 0.50302 45.0 0.85 30 8 0.33 0.88 1.02 550.99 0.45 21150.52 0.48 0.2725 28.8 16.2 0.46 0.53 0.51302 15 -- 0.75 0.27 16.216 0.46 0.53 -- 30 55 --0.6 36.0 1.44 0.42 86.4 0.48 0.44 180° 12 35 0.34 180° 51.6 0.84 35 9 0.38 0.85 0.99 0.52 0.64 38.4 94.8 0.42 0.48251 25 --1.58 0.45 --25 -- 0.450.86--- 17 ---0.98 0.43 16--0.49 0.6-- 27 36.0 0.52 0.38 0.50 55.8 0.71 42.6 1.70 0.43 102.0 0.49 0.42 0.48271 0.80 0.92 0.42 17120.49 0.64 40 10 0.42 0.81 0.93 180°13 4030 30 0.3428 38.4 20.4 0.45 0.52 120.430.93 0.34 20.418180° 0.45 0.52 14 45 0.42 0.410.960.48 57.6 19 0.77 46.2 0.41 0.47 30 1.82 109.2 0.39 0.45 0.82 45 11 0.46 0.77 0.88 350.95 0.38 42.6 22.8 0.42 0.43 0.49 0.50 35 13 0.38 22.8 0.43 0.50 1813 0.71 281 14 50 0.44 0.43 0.50 63.620 0.85 51.0 0.41 0.47 30 1.93 115.8 0.41 0.48 0.80 50 11 0.48 0.76 0.88 400.92 0.42 46.2 25.2 0.41 0.41 0.47 0.48 19140.46 0.77 301 40 140.431.06 0.42 25.221 0.41 0.48 15 0.50 0.49 0.91 54.6 0.40 30 2.04 122.4 0.44 0.50 55 45 66.6 0.83 0.96 55 12 0.50 0.73 0.84 45 0.4430 51.0 26.4 0.43 0.50 140.44 1.11 0.44 26.421 0.43 0.50 15 0.51 0.50 0.95 57.0 0.41 20140.48 0.85 2.13 0.41 127.8 0.47 0.46 0.53302 3050 52.8 0.86 0.99 30 8 0.35 0.80 0.93 50 0.5025 54.6 30.0 0.43 0.49 15 -- 0.88 0.50 30.0 0.43 0.49 ---16 0.72 43.2 0.46 21150.54 0.91 1.68 0.40 100.8 0.46 0.44 0.51302 210° 12 35 0.40 210° 57.6 0.81 35 9 0.38 0.77 0.89 0.53 0.75 45.0 1.84 0.41 110.4 0.48 0.42 0.48302 550.93 0.43 21150.49 0.95 0.5127 57.0 30.6 0.44 0.50 55 150.460.96 0.51 30.617 0.44 0.50 40 1.10 66.0 0.81 0.93 40 10 0.43 0.81 0.91 13 0.45 0.51 0.81 48.6 0.41 16--0.48 0.72 119.4 0.42 0.48251 25 -- 28 43.2 --1.99 0.46 --25 -- 0.44 --- 18 --0.54 0.49 0.41 1.160.48 69.619210° 0.86 51.6 0.39 0.45 30 2.12 127.2 0.39 0.45 0.85 45 10 0.45 0.82 0.95 210°14 4530 300.98 0.40 45.0 24.0 0.43 0.46 0.49 0.53 1712 0.75 271 12 0.40 24.0 0.46 0.53 14 0.51 0.43 0.50 20 0.91 54.6 0.38 0.43 30 2.25 135.0 0.41 0.48 50 35 1.24 74.4 0.80 50 11 0.49 0.73 0.85 350.92 0.45 48.6 27.0 0.41 0.44 0.48 0.51 13 0.45 27.0 0.44 0.51 1813 0.81 281 15 0.57 0.42 0.48 21 0.98 58.8 0.37 0.42 30 2.37 142.2 0.43 0.50 55 78.0 0.84 0.97 55 12 0.56 0.70 0.81 40 0.4930 51.6 29.4 0.41 0.48 40 140.431.30 0.49 29.421 0.41 0.48 15 0.59 0.50 1.01 60.6 0.38 19140.44 0.86 2.49 0.39 149.4 0.45 0.46 0.53301 30 45 68.4 0.87 1.00 30 8 0.66 0.89 1.03 45 0.5125 54.6 30.6 0.43 0.50 14 -- 1.140.51 30.616 0.43 0.50 ---0.87 52.2 0.44 20140.50 0.91 2.19 0.38 131.4 0.43 0.45 0.52302 270° 360° 35 35 1.24 74.4 0.81 0.94 9 0.71 0.80 0.92 12 0.48 0.49 0.95 57.0 0.42 21150.49 0.98 2.37 0.37 142.2 0.42 0.42 0.48302 50 0.5727 58.8 34.2 0.42 0.48 50 150.43 0.57 34.217 0.42 0.48 0.80 0.92 0.41 40 10 0.78 0.79 0.91 13 40 55 0.53 0.46 84.0 1.03 61.8 2.55 0.38 153.0 0.44 0.42 0.48302 21150.47 1.01 150.401.40 0.59 35.418 0.43 0.50 55 0.5928 60.6 35.4 0.43 0.50 14 45 0.63 0.48 88.219 66.0 30 2.73 163.8 0.39 0.45 0.84 45 10 0.85 0.78 0.90 25 -- 0.41 1.47----1.10 --0.97 0.39 16--0.45 0.87 52.2 0.44 0.50 251 25 ----0.441.54 0.51 1.17 70.2 0.43 30 2.89 173.4 0.41 0.48 50 0.67 92.420270° 0.77 0.89 0.38 50 11 0.88 0.73 0.85 270°14 1712 0.95 271 30 12 0.48 28.8 0.43 0.49 30 0.48 57.0 28.8 0.42 0.43 0.49 0.49 15 55 0.72 0.41 1.61 0.47 96.621 1.23 73.8 0.41 30 3.06 183.6 0.44 0.50 0.81 0.93 0.36 55 12 0.98 0.70 0.81 35 130.43 0.53 31.821 0.40 0.46 35 0.5330 61.8 31.8 0.40 0.46 15 0.75 0.49 1.30 78.0 0.38 18130.44 1.03 3.22 0.41 193.2 0.47 0.46 0.53281 30 91.2 0.87 1.00 14 -- 1.52 0.63 37.816 0.41 0.48 40 0.6325 66.0 37.8 0.41 0.48 -1.20 72.0 0.45 19140.52 1.10 2.88 0.39 172.8 0.45 0.44 0.51301 360° -- 3540-1.70 102.0 0.83 0.96 360° 12 0.69 0.53 1.28 76.8 0.43 20140.49 1.17 3.15 0.38 189.0 0.43 0.42 45 140.46 0.67 40.217 0.44 0.51 45 0.6727 70.2 40.2 0.44 0.51 0.48302 Due to its precipitation rate of approximately 0.8 in/hr, we strongly 1.87 0.51 112.218 0.80 0.92 0.41 13 4050 0.77 1.37 82.2 3.40 0.36 204.0 0.41 0.42 0.48302 21150.47 1.23 150.44 0.72 43.2 0.41 0.47 50 0.7228 73.8 43.2 0.41 0.47 recommend zoning the MP800 Series separately from the Standard 2.000.48 120.019 0.86 0.99 0.39 14 45 55 0.84 1.48 88.8 3.64 0.38 218.4 0.44 0.39 0.4530 21150.46 1.30 15 0.41 0.75 45.0 0.43 0.49 55 0.7530 78.0 45.0 0.43 0.49 2 MP Rotator Series. 14 50 0.88 0.432.130.50 127.820 1.57 94.2 0.44 30 3.86 231.6 0.41 0.48 0.80 0.92 0.38 25 -----16-1.20 72.0 0.45 0.52 251 25 ----15 55 0.98 0.422.260.48 135.621 1.68 100.8 0.42 30 4.07 244.2 0.44 0.50 0.85 0.98 0.37 360°15 30 120.43 0.69 41.421360° 0.46 0.53 30 0.6930 76.8 41.4 0.46 0.53 1.01 0.50 1.74 104.4 0.38 17120.44 1.28 4.27 0.43 256.2 0.49 0.46 0.53271 1813 1.37 281 35 13 0.77 46.2 0.44 0.51 35 0.77 82.2 46.2 0.41 0.44 0.47 0.51 40 14 0.84 50.4 0.41 0.48 1914 1.48 301 40 0.84 88.8 50.4 0.39 0.41 0.46 0.48 MP3500 45 MP35000.43 MP3500 PERFORMANCE DATA NOTE FOR ALL CHARTS: 90° 180° 14 0.88 52.8 0.50 20 1.57 94.2 45 14 0.88 52.8 0.38 0.43 0.44 0.50210° 302 Radius: 31' to 35' Radius: 31' to 35' Radius: 31' to 35' Bold = Recommended Pressure. 15 0.98 58.8 0.42 0.48 2115 1.68 100.8 302 50 0.98 58.8 0.42 0.42 0.48 Adjustable50 Arc Adjustable Arc Adjustable Arc 0.37 The MP Rotator is designed to maintain matched precipitation after radius adjustment. Optimal for the MP is 40Brown: PSI. This can be 55 pressure 15 1.01 Rotator 60.6 0.43 0.50 2115 1.74 104.4 0.38 302 55 1.01 Light 60.6 0.43 0.44 0.50 Light Brown: 90° Light 180° Brown: 210°
90°
30
8
0.17
35
9
0.21
9.6 11.4 13.8 15.0 16.2 16.8 19.2 22.2 25.2 27.6 28.8 30.0 22.2 26.4 29.4 31.8 33.6 34.8 37.8 42.0 46.8 51.0 52.8 58.8
0.90
1.04
0.89
1.03
6 0.13 7 90°0.15 8 0.16 8 0.18 9 0.19 10 0.20 6 0.26 7 180° 0.29 8 0.32 8 0.36 9 0.38 10 0.40 6 0.30 7 210° 0.34 8 0.37 8 0.42 9 0.44 10 0.47 6 0.47 7 270° 0.52 8 0.56 8 0.59 9 0.63 10 0.70
25 30 35 40 45 50 55 25 30 35 40 45 50 55 25 30 35 40 45 50 55 25 30 35 40 45 50 55 25 30 35 40 45 50 55
--
90° 90° 12
30 25 --
MP2000-210
35 30 0.17
--14 15 10.2 11.4 15 12.6 16 13.8 16 15.0 16 16.2 --13 14 20.4 22.8 15 25.2 15 26.4 16 30.0 16 30.6 13 -14 24.0 15 27.0 29.4 15 30.6 16 34.2 16 35.4 13 -14 28.8 15 31.8 37.8 15 40.2 16 43.2 16 45.0 13 -14 41.4 15 46.2 15 50.4 52.8 16 58.8 16 60.6
achieved easily by using the MP Rotator with the Pro-Spray PRS40 Spray Body, pressure regulated Flow at 40 PSI. Pressure Radius Flow Precip in/hr PSI
ft.
GPM
GPH
25 30 35
33 34 34
1.04 1.13 1.21
0.42 Radius: 35' 67.8 0.3831' to0.43 Adjustable Arc 72.6 0.40 0.47
MP3500 62.4 0.37
Light Brown: 90°
Radius ft.
Flow GPM
Flow GPH
33 34 34
2.21 2.24 2.65
134.4 159.0
90° 132.6
Precip in/hr
MP3500 MP3500 0.39 0.45
Radius ft.
33 Radius: 31'31'toto35' Radius: 35' 0.37 0.43 34 Adjustable Arc Adjustable Arc 0.44 0.51 34
Light LightBrown: Brown:180° 90°
Flow GPM
Flow GPH
2.59 2.84 3.08
155.4 170.4 184.8
Precip in/hr
67
180° 90° 0.39
0.41 0.44
MP3 MP 0.45 Radiu Rad 0.47 Adjus Adj 0.51
Lig L
- 30' GUIDE MP ROTATOR22' DESIGN
SPECIAL PATTERN
MP3000, MP3500 500 MP1000, MP2000, MP ROTATOR DESIGN GUIDE
MP1000, MP2000, MP3000, MP3500 MP ROTATOR DESIGN GUIDE MP Specialty
MP ROTATOR PERFORMANCE DATA MP1000MP3000 90° - 210° MP3000
MP2000
MP3000 45° - 105° CORNER
MP1000-C
Radius: 8' 30' to 15' Radius: 13' to 21' Radius: 22' to 30' Radius: 22' to MP ROTATOR PERFORMANCE DATA Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle nd Full-Circle Adjustable Arc and Full-Circle Maroon: 90° to 210° Black: 90° to 210° Blue: 90° MP to 210° ROTATOR PERFORMANCE DATA 210° Blue: 90° to 210° MP1000 MP2000 MP3000 Lt. Blue: 210° to 270° Green: 210° to 270° Yellow: 210° to 270° o 270° Yellow: 210° to 270° Radius: 8' to 15' Red: 360° Radius: 13' to 21' Gray: 360° Radius: to 30' Olive: Gray: 360°360° MP22' Corner Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Radius:Arc 8' toand 15' Full-Circle Arc in/hr Pressure Radius RadiusFlowFlowFlowFlowPrecip Precip in/hr 90°Radius Flow PrecipBlack: in/hr 90° to Radius Flow Flow Precip in/hr Adjustable Flow Precip in/hr Maroon: to 210° Flow 210° Blue: 90° toArc 210° Turquoise: to 105° PSI GPMGPHGPH GPH GPH Lt. Blue: 210° toft. 270° GPM Green: 210° toft. 270° GPM Yellow: 210° to45° 270° GPH ft. ft. GPM Olive: 360° 25 --360° 17 0.34 20.4 0.45 Red: 0.52 25 0.71 42.6 0.44 Gray: 0.51 360° 20.4 0.45 0.52 25 -- 0.71 -- 42.6 -- 0.44 -- 0.51 22.8 24.0 25.8 27.6 28.2 28.8 36.0 38.4 42.6 46.2 51.0 54.6 57.0 43.2 45.0 48.6 51.6 54.6 58.8 60.6 52.2 57.0 61.8 66.0 70.2 73.8 78.0 72.0 76.8 82.2 88.8 94.2 100.8 104.4
210° - 270°
MP3000-210
5' - 14' LEFT
MP1000-LS
360°
MP3000-360
5' - 14' RIGHT
MP1000-RS
5' - 28' CENTRE
MP1000-SS
90° 0.45
0.43 0.41 0.40 0.41 0.42 0.45 180° 0.43 0.42 0.41 0.41 0.40 0.41 0.46 210° 0.43 0.41 0.39 0.38 0.37 0.38 0.44 270° 0.42 0.41 0.39 0.38 0.36 0.38 0.45 360° 0.43 0.41 0.39 0.38 0.37 0.38
30 0.52 35 0.49 40 0.48 45 0.46 50 0.47 55 0.48 25 0.52 30 0.49 35 0.49 40 0.47 45 0.47 50 0.46 55 0.48 25 0.54 30 0.49 35 0.48 40 0.45 45 0.43 50 0.42 0.44 55 0.50 25 0.49 30 0.47 35 0.45 40 0.43 45 0.41 50 0.44 55 0.52 25 0.49 30 0.47 35 0.46 40 0.44 45 0.42 50 0.44 55
180°
180°
27 12 28 13 30 14 30 14 30 15 30 15 25 -27 12 28 13 30 14 30 14 30 15 30 15 25 -27 12 28 13 30 14 30 14 30 15 30 15 25 -27 12 28 13 30 14 30 14 30 15 30 15 25 -27 12 28 13 30 14 30 14 30 15 30 15
0.760.17 45.610.2 0.400.450.46 0.52 Arc Pressure Radius Flow 0.820.19 49.211.4 0.400.430.46 0.50 PSI ft. GPM 0.860.21 51.612.6 0.370.410.42 0.48 25 --0.900.23 54.013.8 0.390.450.44 0.52 90° 30 0.410.430.47 12 0.49 0.17 0.950.25 57.015.0
18 Flow 19 GPH 20 21 -2110.2 2111.4 1612.6 1713.8 1815.0 1916.2
25 0.410.430.48 -- 0.50 -1.930.44115.826.4
20 -0.85-51.0-0.45 54.6 0.52 2120.4 0.91 0.43 57.0 0.50 2122.8 0.95 0.41 43.2 0.48 1625.2 0.72 0.43 45.0 0.50 1726.4 0.75 0.43 48.6 0.49 1830.0 0.81 0.44 51.6 0.50 1930.6 0.86 20 -0.91-54.6-0.46 58.8 0.53 2124.0 0.98 2127.0 1.01 0.44 60.6 0.51 1629.4 0.87 0.41 52.2 0.48 1730.6 0.95 0.43 57.0 0.50 1834.2 1.03 0.42 61.8 0.48 1935.4 1.10 0.43 66.0 0.50 20 -1.17-70.2-2128.8 1.23 0.43 73.8 0.49 2131.8 1.30 0.40 78.0 0.46 1637.8 1.20 0.41 72.0 0.48 1740.2 1.28 0.44 76.8 0.51 1843.2 1.37 0.41 82.2 0.47 1945.0 1.48 0.43 88.8 0.49 20 -1.57-94.2-2141.4 1.68 0.46 100.8 0.53 2146.2 1.74 0.44 104.4 0.51
35 0.430.460.50 13 0.53 0.19 1.010.27 60.616.2 14 -- 0.21 -- 0.44 -- 0.51 1.44 -- 86.440 45 0.420.450.48 14 0.52 0.23 1.580.34 94.820.4 50 0.420.430.48 15 0.50 0.25 1.700.38102.022.8 55 0.390.410.45 15 0.48 0.27 1.820.42109.225.2
180° 30 0.440.430.50 12 0.49 0.34 2.040.50122.430.0 35 0.460.440.53 13 0.50 0.38 2.130.51 127.830.6 14 -- 0.42 -- 0.44 -- 0.51 1.68 -- 100.840 45 0.420.460.48 14 0.53 0.44 1.840.40110.424.0 50 0.420.440.48 15 0.51 0.50 1.990.45 119.427.0 55 0.390.410.45 15 0.48 0.51 2.120.49127.229.4 25 0.410.430.48 -- 0.50 -2.250.51 135.030.6 210° 30 0.430.420.50 12 0.48 0.40 2.370.57142.234.2 2.490.59149.435.4 35 0.460.430.53 13 0.50 0.45 2.19 -- 131.440 -- 0.45 -- 0.52 14 -- 0.49 2.370.48142.228.8 45 0.420.430.48 14 0.49 0.51 2.550.53153.031.8 50 0.420.400.48 15 0.46 0.57 2.730.63163.837.8 55 0.390.410.45 15 0.48 0.59 2.890.67173.440.2 25 0.410.440.48 -- 0.51 -3.060.72183.643.2 270° 30 0.440.410.50 12 0.47 0.48 3.220.75193.245.0 35 0.460.430.53 13 0.49 0.53 2.88 -- 172.840 -- 0.44 -- 0.51 14 -- 0.63 3.150.69189.041.4 45 0.420.460.48 14 0.53 0.67 3.400.77204.0 46.2 50 0.420.440.48 15 0.51 0.72 3.640.84218.450.4 55 0.390.410.45 15 0.48 0.75 3.860.88231.652.8 25 0.410.430.48 -- 0.50 -4.070.98244.258.8 360° 30 0.440.420.50 12 0.48 0.69 4.271.01 256.260.60.460.430.53 0.50 35 13 0.77
MP3500 MP3500
Radius: 31' to Radius: 31'35' to 35' Adjustable Arc Arc Adjustable Light Brown: 210°90° Light Brown:
40 45 50 55
14 14
210° 90° 15 15
MP Rotator Key
0.84 50.4 0.41 0.88 52.8 0.43 MP3500 0.98 58.8 0.42 Radius: 31' to 35' 1.01 Adjustable 60.6 Arc 0.43
Precip in/hr in/hrin/hr Pressure Radius RadiusFlowFlowFlowFlowPrecip Precip Radius MP3500 31' - 35' ft. ft. GPM PSI GPMGPHGPH Radius: 31' to 35' ft.
132.6 134.4 159.0 171.6 186.0 192.6 196.8
0.39 0.37 0.44 0.45 0.49 0.50 0.52
33 33 34 34 34 34 35 35 35 35 35 35 35 35
2.591.04 155.462.4 0.390.37 0.450.42 Arc Adjustable 33 Light Brown: 90° 2.841.13 170.467.8 0.410.380.47 0.43 34 3.081.21 184.872.6 0.440.400.51 0.47 Pressure Radius Flow 34 Flow 3.291.28 197.476.80.440.400.51 0.46 PSI ft. GPM 35GPH 3.541.38 212.482.8 0.480.430.55 0.50 35 25 33 1.04 62.4 3.761.43225.685.8 0.510.450.59 0.52 35 30 34 1.13 67.8 3.941.50236.4 90.0 0.530.470.61 0.54 35 35 34 1.21 72.6
90° - 210° MP3500
40 45 50 55
0.48 0.50 0.48 0.50
0.45 0.52 27 0.76Arc 45.6 Pressure 0.40 0.46 Radius Radius Flow Flow Precip in/hr Radius Flow 0.43 0.49 28 0.82 49.2 PSI 0.40 0.46 ft. GPM GPH ft. ft. GPM 0.41 0.48 30 0.86 51.6 0.37 0.42 0.45 54.0 0.52 25 0.40 17 0.46 0.34 3020.4 0.90 0.39 25 0.44 -- 0.71 45° 0.45 57.00.52 30 0.41 18 0.47 0.38 30 22.8 0.95 0.41 27 0.47 12 0.76 0.49 35 0.42 19 0.48 0.40 3024.0 1.010.43 60.6 0.43 28 0.50 13 0.82 14 0.86 0.4840 0.45 200.52 0.43 25 25.8 1.440.41 86.4 0.44 30 0.51 14 0.40 94.8 0.46 45 0.43 21 0.49 0.46 27 27.6 1.58 0.42 30 0.48 0.90 14 0.47 50 0.42 21 0.49 0.47 28 28.2 1.700.41 102.0 0.42 30 0.48 0.95 55 15 0.42 109.2 0.48 0.39 30 1.01 0.41 21 0.47 0.48 30 28.8 1.82 0.45
35 35 35 35
1.28 1.38 13 1.43 1.50
Flow GPM
Flow 90° GPH
2.21 132.6 2.24 134.4 2.65 Precip159.0 in/hr 2.86 171.6 3.10 186.0 0.37 0.42 3.21 192.6 0.38 0.43 3.28 196.8 0.40 0.47 76.8 0.40 0.46 82.8 0.43 0.50 85.8 0.45 0.52 90.0 0.47 0.54
Flow Flow GPM GPH
Flow Precip in/hr GPH
0.44 -- 0.51 0.4010.20.46 MP 0.4010.80.46 Corn 0.37 11.40.42 Strip 12.6 0.39 0.44 13.2 0.41 0.47 13.8 MP 0.43 0.50 25 11 18.6 Righ 0.45 115.8 0.52 0.41 25 0.44 0.51 90° 0.41 16 0.47 0.6 3036.0 1.93 0.48 12 1.44 30 20.4 Corn 0.43 122.4 0.49 35 0.42 21.60.48 0.40 17 0.46 0.64 30 38.4 2.04 0.44 27 0.50 13 1.58 0.49 40 0.4223.40.48 Strip 0.41 18 0.48 0.71 30 42.6 2.130.42 127.8 0.46 28 0.53 14 1.70 0.47 45 0.3924.60.45 0.46 19 0.54 0.77 25 46.2 1.680.41 100.8 0.44 30 0.51 14 1.82 0.47 50 0.41 25.80.48 0.43 200.49 0.85 27 51.0 1.840.41 110.4 0.42 30 0.48 15 1.93 0.46 0.40 119.4 0.46 55 122.4 0.4427.60.50 0.41 21 0.48 0.91 28 54.6 1.99 0.42 30 0.48 15 2.04 MP 0.36 0.48 25 127.8 0.4621.60.53 0.39 21 0.45 0.95 30 57.0 2.120.41 127.2 0.39 30 0.45 11 2.13 105° Strip 0.39 0.46 135.0 0.54 30 100.8 0.4423.40.51 0.38 16 0.43 0.72 30 43.2 2.25 0.41 25 0.48 12 1.68 0.42 0.43 142.2 0.49 35 110.4 0.4225.20.48 0.37 17 0.42 0.75 3045.0 2.37 0.43 27 0.50 13 1.84 40 14 0.45 27.0 0.38 18 0.44 0.81 3048.6 2.49 0.53 0.41 149.4 0.48 0.46 28 1.99 119.4 0.42 0.48 45 14 0.48 28.8 Strip pa 0.44 19 0.50 0.86 25 51.6 2.19 0.52 0.39 131.4 0.45 0.45 30 2.12 127.2 0.39 0.45 50 15 0.51 30.6 MP Stri 0.42 200.49 0.91 27 54.6 2.37 0.42 30 0.48 0.38 142.2 0.43 55 2.25 135.0 0.41 0.48 MP800 15 0.53 31.8 0.41 21 0.47 0.98 28 58.8 2.55 153.0 0.42 0.48 0.37 0.42 30 2.37 142.2 0.43 0.50 0.39 21 0.45 1.01 3060.6 2.73 0.45 2.49 0.38 163.8 0.44 0.39 30 149.4 0.46 0.53 0.38 16 0.43 0.87 30 52.2 2.89 0.48 0.44 173.4 0.50 0.41 25 2.19 131.4 0.45 0.52 PERFORMANCE DATA NOTE ALL CHARTS: 0.36 17 0.41 0.95 30 57.0 3.06 0.50 FOR 0.42 183.6 0.49 0.44 27 2.37 142.2 0.42 0.48 Bold = Recommended 0.38 18 0.44 1.03 30 61.8 3.22 193.2 0.53 0.41 0.47 0.46 Pressure. 28 2.55 153.0 0.42 0.48 The0.39 MP Rotator designed to maintain 0.45 19 0.52 1.10 2566.0 2.88 172.8 0.51 0.45is0.44 30 2.73 matched 163.8 precipitation 0.39 0.45after radius adjustm This can be achieved easily by using the MP Rotator with the Pro-Spray PRS40, pre 0.43 200.49 1.17 27 70.2 3.150.38 189.0 0.48 2.89 0.43 0.42 30 173.4 0.41 0.48 0.41 21 0.47 1.23 28 73.8 3.40 0.48 3.06 0.36 204.0 0.41 0.42 30 183.6 0.44 0.50 0.39 21 0.46 1.30 30 78.0 3.64 0.45 3.22 0.38 218.4 0.44 0.39 30 193.2 0.46 0.53 0.38 16 0.44 1.20 30 72.0 3.86 0.48 2.88 0.45 231.6 0.52 0.41 25 172.8 0.44 0.51 0.37 17 0.42 1.28 30 76.8 4.07 0.50 0.43 244.2 0.49 0.44 27 3.15 189.0 0.42 0.48 0.38 18 0.44 1.37 30 82.2 4.270.41 256.2 0.53 3.40 0.47 0.46 28 204.0 0.42 0.48 19 1.48 88.8 0.39 0.46 30 3.64 218.4 0.39 0.45 20 1.57 94.2 0.38 0.44 30 3.86 231.6 0.41 0.48 MP3500 180° 210° 21 1.68 100.8 0.37 0.42 30 4.07 244.2 0.44 0.50 Radius: 31' to 35' 21 1.74Adjustable 104.4 Arc0.38 0.44 30 4.27 256.2 0.46 0.53
42.6 -45.6 0.17 0.18 49.2 0.19 51.6 0.21 54.0 0.22 57.0 0.23 60.6 0.31 86.4 0.34 94.8 0.36 102.0 0.39 109.2 0.41 115.8 0.43
MPKEY
Light Brown: 180°
Flow GPH
0.45 25 0.43 30 0.51 35 0.52 40 0.56 45 0.58 50 0.60 55
0.38 22.8 Precip in/hr 0.40 24.0 0.43 25.8 -0.46 27.6-0.45 28.2 0.52 0.47 0.43 28.8 0.50 0.48 0.41 36.0 0.48 0.6 0.45 38.4 0.52 0.64 0.43 42.6 0.49 0.71 0.46 46.2 0.53 0.77
MP R
Light Brown: 210°
Precip in/hr MP3500
Radius Radius: 31' to 35' ft.
Flow GPM
Flow Precip in/hr MP3500 180° GPH Radius: 31' to 35'
Arc 2.59 155.4 0.39 Adjustable 0.45 Light 2.84 170.4 0.41 0.47 Brown: 210° 0.44Radius 0.51 Flow 34Flow 3.08 184.8 0.51 Flow Precip in/hr 0.44 Radius Flow 0.45 ft. 0.52 GPM 35GPH 3.29 197.4 0.44 ft. 0.51 GPM GPH 0.49 0.56 35 3.54 212.4 0.48 0.55 33 2.21 132.6 0.39 0.45 33 2.59 155.4 0.50 0.58 35 3.76 225.6 0.51 0.59 34 2.24 134.4 0.37 0.43 34 2.84 170.4 0.52 0.60 35 3.94 236.4 0.53 0.61 34 2.65 159.0 0.44 0.51 34 3.08 184.8 35 2.86 171.6 0.45 0.52 35 3.29 197.4 35 3.10 186.0 0.49 0.56 35 3.54 212.4 13 35 3.21 192.6 14 0.50 0.58 35 3.76 225.6 35 3.28 196.8 0.52 0.60 35 3.94 236.4
210°
0.39Adjustable 0.45 Arc 33 0.37 Light 0.43Brown: 180° 34
Precip in/hr 0.39 0.41 0.44 0.44 0.48 0.51 0.53
0.45 0.47 0.51 0.51 0.55 0.59 0.61
13
68
CONTROLLERS 1. 2. 3. 4. 5.
WIFI CONTROLLER HARDWIRED CONTROLLER BATTERY CONTROLLER GARDEN HOSE TIMER ACCESSORIES
Irrigation controllers are the heart of any multi-zoned irrigation system and are widely used for both sprinkler and drip/micro irrigation systems. Irrigation controllers are offered in both outdoor and indoor configurations and are available for systems from 4-32 zones.
HUNTER WIFI CONTROLLER Sit back and relax. With Hunter-Hydrawise, everything you need is in the palm of your hand. Remote access allows you to view, manage, and monitor your irrigation controller from your phone, tablet, or computer at your convenience. 6,12,24, up to 54 stations 6 start times per station - New style full-functioning controller with colour touchscreen - Wifi enabled for simple connection to the internet - Receives weather info via internet to help manage water use
Warranty 2 years HCC-800-M for up to 54 stations
¾" FLOW SENSOR
HC-075-FLOW-B
1" FLOW SENSOR
HC-100-FLOW-B
1 1/2” FLOW
HC-150-FLOW-B
2” FLOW SENSOR
HC-200-FLOW-B
69
HYDRO-RAIN WIFI CONTROLLER The Hydro-Rain HRC-400 smart irrigation controller, powered by B-Hyve, combines the easiest-to-program controller on the market with the remote capabilities of Bluetooth and wifi. A perfect controller for new installations, or for replacement applications.
6 or 18 stations fixed 3 programs - 4 start times - Wifi enabled for simple connection to the internet - Rain sensor bypass technology allows manual or automatic rain delay Warranty 3 years
8 STATIONS
HRC400-WIFI-08
16 STATIONS
HRC400-WIFI-16
CUSTOM DOORS WITH YOUR COMPANY LOGO AVAILABLE
RAIN BIRD ESP MODULAR CONTROLLER With 4- to 22-station capability, the ESP-Me helps you better serve your customers. Install the same controller on residential and light commercial sites – the more stations you add, the more you save, providing you and your customers with more value for the money.
4 stations expandable to 22 stations 4 programs - 6 start times each (1-360) minutes) - Automatic watering delay - Bypass rain sensor by station - Delay watering Warranty 3 years - Expansion modules - Rainbird LNK Wifi module INDOOR TIMER 4 STATIONS
ESP4MEI
OUTDOOR TIMER ESP4ME STATION MODULES
70
3 STATIONS
ESPM-3
6 STATIONS
ESPM-6
IRRITROL TOTAL CONTROL CONTROLLER The Irritrol® Total Control®l-R family of controllers is prove that advanced doesn’t have to be complicated. Developed to meet a wide variety of watering requirements, the easy-to-program Total Control series is available in models ranging from 6 to 48 stations. Programming flexibility is provided by four independent programs, 16 independent start times and a 365-day calendar for odd/even day scheduling. 6,9,12,15,18 or 24 stations 4 programs - 4 start times each (1-600 minutes) - Removable Panel module Upgrade - Programmable Rain-off up to 7 Days Warranty 5 years - CI-100-Wireless Weather Sensing - SMRT-1 Smart Logic - R-100-Kit Remote
INDOOR TIMER
OUTDOOR TIMER
6 STATION
TC-6IN-R
TC-6EX-R
9 STATION
TC-9IN-R
TC-9EX-R
12 STATION
TC-12IN-R
TC-12EX-R
15 STATION
TC-15EX-R
18 STATION
TC-18EX-R
24 STATION
TC-24EX-R
36 STATION
TC-36EXM-R
48 STATION
TC-48EXM-R
IRRITROL KD2 CONTROLLER
KD2 SERIES offers a unique combination of sophisticated features and familiar operation, making it the ideal residential controller from Irritrol®. Its automatic, semi-automatic and manual operations, a wide range of watering intervals, and the ability to make percentage changes to watering duration for seasonal adjustments provides excellent scheduling flexibility. 4, 6, 9 or 12 stations fixed (indoor or outdoor) 3 watering programs, 3 start times (1-360 minutes) - Non-volatile program memory - Automatic valve testing mode - Rain delay mode Warranty 5 years - Climate logic weather sensing - Rain sensor - Outdoor timer comes with cabinet door INDOOR TIMER
OUTDOOR TIMER (comes with a door)
4 STATION
KD400-INT
KD400-EXT
6 STATION
KD600-INT
KD600-EXT
9 STATION
KD900-INT
KD900-EXT
71
HYDRO-RAIN CONTROLLER This straightforward, user-friendly sprinkler controller combines simplicity of operation with feature-rich flexibility. For starters, the HRC 100 C is enclosed in an indoor/outdoor UL approved case capable of 4,6,9 or 12 watering stations. Each model offers three independent programs– A, B and C –with up to four start times per program.
4, 6, 9 or 12 stations fixed 3 programs - 4 start times each (1-240 minutes) - Program data safely stored - Manual advance - Indoor/Outdoor UL® cabinet Warranty 3 years
CUSTOM DOORS WITH YOUR COMPANY LOGO AVAILABLE
4 STATIONS
HRC100-04
6 STATIONS
HRC100-06
9 STATIONS
HRC100-09
12 STATIONS
HRC100-12
RAIN BIRD ESP-TM2 CONTROLLER The ESP-TM2 irrigation controller is the perfect option for basic residential solutions. Building upon Rain Bird’s legacy of The Intelligent Use of Water®, this controller offers simple water saving features that you will actually use. Designed for indoor and outdoor use. 4, 6, 8 or 12 stations fixed 3 programs - 4 start times each - Manual Watering option for all stations, a single station or an individual program - Sensor bypass for all programs or for individual stations - Automatic short detect with station specific alarm Warranty 3 years
72
4 STATIONS
TM2-4
6 STATIONS
TM2-6
8 STATIONS
TM2-8
12 STATIONS
TM2-12
TEMPUS DC CONTROLLER With its advanced features, the new TEMPUS DC battery-operated controller is ideal for managing irrigation in areas without an electrical connection. Wireless connectivity is integrated to allow intuitive programming through the new Toro TEMPUS DC mobile app. TEMPUS DC is completely waterproof. 1, 2, 4 or 6 stations fixed 4 programs - 3 start times each - Completely waterproof - Rain Sensor Ready - Battery-operated
Warranty 3 years 1 STATION
TEMP-1-DC
2 STATIONS
TEMP-2-DC
4 STATIONS
TEMP-4-DC
6 STATIONS
TEMP-6-DC
TEMPUS DC CONTROLLER WITH SCREEN With its advanced features, the new TEMPUS DC battery-operated controller is ideal for managing irrigation in areas without an electrical connection. Wireless connectivity is integrated to allow intuitive programming through the new Toro TEMPUS DC mobile app. TEMPUS DC is completely waterproof and with an LCD screen. 1, 2, 4 or 6 stations fixed 4 programs - 3 start times each - Completely waterproof - Rain Sensor Ready - Battery-operated
Warranty 3 years
1 STATION
TEMP-1-DC-L
2 STATIONS
TEMP-2-DC-L
4 STATIONS
TEMP-4-DC-L
6 STATIONS
TEMP-6-DC-L
73
HYDRO-RAIN BATTERY TIMER Setting a new standard in battery operated controllers, the HRC 990 is the answer to those difficult situations when installing burial wire is not possible or desired. HRC 990 is tough enough for installation in a below ground, valve box environment while providing years of no hassle, reliable service.
4 stations fixed 2 programs - Unique water tight plug-in system - Battery powered—wire-free installation - Water budgeting—saves water Warranty 2 years
1 - 4 STN BATTERY TIMER
HRC-990
DC SOLENOID
HRC-990S
DC SOLENOID PIGTAIL
HRC-990P
RAINBIRD DV ADAPTER
HRC-990DV
RAINBIRD PEB ADAPTER
HRC-990PEB
WIRED RAIN SENSOR
HRC-100-RS
WIRELESS RAIN SENSOR
HRC-100-WRS
MOISTURE SENSOR
HRC-990MS
74
RAIN BIRD TBOS™ BATTERY CONTROLLER The TBOS-II battery-operated line of buriable irrigation controllers allows the use of automatic irrigation in challenging areas where AC power is not available. Its water saving programming features maximize water efficiency by letting you build highly-customized programs.
1, 2, 4 or 6 stations 3 programs - 8 start times each (1-360) minutes) - Flexible programming - Time-saving programming - Advanced water management Warranty 3 years
TBOS-BT
STATION MODULES
1 STATION
TBOS-BT1LT
2 STATION
TBOS-BT2LT
4 STATION
TBOS-BT4LT
HOSE TIMER & ACCESSORIES 1
1 ZONE HOSE BIB TIMER
62061N
2
2 ZONE HOSE BIB TIMER
58910
3
DIG BATTERY HOSE TIMER, 1 ZONE B09D
4
1 ZONE HOSE BIB TIMER
HRC-980
5
MECHANICAL TIMER
MTIMER
6
HOSE END FLOW METER
HEFM
7
HOSE BIBB TIMER - Rainbird Single Sation, Two Programs
1ZEHTMR
8
B-hyve XD Bluetooth Hose Watering 24511 Timer
9
B-hyve XD Bluetooth 2-Outlet Hose Faucet Timer
24632
10
B-hyve XD Bluetooth 4-Outlet Hose Faucet Timer
24634
11
B-hyve Gen 2 Wi-Fi Hub
21027
7
8
9
1
2
4
3
6
5
10
11
75
CLIMATE LOGIC™ WEATHER-SENSING SYSTEM CLIMATE LOGIC KIT
CL-100
CLIMATE LOGIC SENSOR ONLY
CL-W1
CLIMATE LOGIC RECEIVER ONLY
CL-M1
CLIMATE LOGIC is an irrigation controller accessory that senses the weather on the landscape site and wirelessly transmits the data to its receiver which, in turn, changes the controller’s watering time based on the weather. The system also uses historical weather information for the site and previous days’ averaging in its calculations to irrigate the landscape appropriately for the local weather. Monitors air temperature. Monitors solar exposure. Detects rainfall. Mounts on the rain gutter w/Quick Clip or on a flat surface using stainless steel screws (provided). Wirelessly sends the data to the module up to 1000 feet away.
TORO RAIN SENSORS WIRED RAIN SENSOR
TRS
WIRELESS RAIN SENSOR
TWRS
Wireless has selectable water conservation modes delay resumption of irrigation by intelligently extending beyond mechanical reset time and can save you up to 30% more water. Transmitting range: up to 500’ (152m) (line-of-sight) with adjustable antenna for unmatched range 25’ cable (white, UV-resistant) provides installation flexibility.
REMOTES HANDHELD/MINI-RECEIVER COMBO R-100-KIT HANDHELD REMOTE ONLY
CL-R1
MINI-REMOTE RECEIVER ONLY
CL-MR
KWIK DIAL REMOTE ADAPTER
CMR-ADP
MAINTENANCE REMOTE KIT
TMR-1-KIT
MINI-REMOTE
- Up to 1.5 mile range (line of sight) and typically ½ mile in urban areas - 1,000’ Line of site range - Works with Climate Logic module without a special receiver
Both Remotes fit: Rain Dial-R Total Control-R KwikDial TMC-212 TMC-424 TMC-424-E
IRRITROL RAIN SENSORS WIRED RAIN SENSOR WIRELESS RAIN SENSOR
WIRELESS
76
WIRED
RS500 RS1000
300-foot transmission range offers virtually limitless installation options 25’ cable (white, UV-resistant) provides installation flexibility Fully adjustable shutoff points from 1/8” to 1” (3-25mm) of accumulated rainfall.
PRECISION SOIL SENSOR The Toro Precision™ Soil Sensor reduces water waste by continuously measuring moisture levels in the soil and determining when to allow your controller to water, maximizing the efficiency of your irrigation system. Communication between the sensor probe and receiver is completely wireless, so installation is quick and easy with no digging required.
The sensor will automatically detect the soil type and adjust all calculations accordingly. Can be installed on any irrigation controller, including competitors’ models.
4 ZONE MODULE
EMOD-4
12 ZONE MODULE
EMOD-12
SMART CONNECTOR
EVO-SC
WEATHER SENSOR
EVO-WS
MOISTURE SENSOR
PSS-SEN
HAND HELD REMOTE
EVO-HH
AUXILIARY RELAY
EVO-AR
SOIL SENSOR KIT
PSS-KIT
77
ELECTRIC VALVES 1. 2. 3.
ELECTRIC VALVES SOLENOIDS FLOWSENSOR
A solenoid valve is an electromechanical device that uses an electric current to generate a magnetic field, regulating the opening of water flow in a valve. These valves vary in electric current, magnetic field strength, fluid regulation mechanism, and the type of fluid they control. Mechanisms range from linear action, plunger-type actuators to pivoted-armature and rocker actuators.
IRRITROL 2400 SERIES ELEC. VALVE ELECTRIC VALVE
Threaded jar-top design allows for removal of cap over the solenoid for easy in-ground maintenance Internal component swap-out can be done in minutes
FRICTI O N LO S S DATA MODEL
SIZE
2400 Series 1”
Flow Rate - GPM
1” 2400 Globe Valve, FIPT
2400T
.25
2
5
10
15
20
30
1” 2400 Globe Valve, FIPT w/ flow control
2400TF
5.00
4.60
3.50
4.00
2.97
3.26
6.20
1 plastic globe valve, MIPT, w/ flow control
2400TF-M
1” Valve Inline MIPT
2400T-M
1” 2400 Globe Valve, Slip
2400S
IRRITROL 205 SERIES ELEC. VALVE ELECTRIC VALVE
A flat fiber washer diaphragm allows the 205 to work in a wide flow range as well as easily handle debris FRICTION LOSS DATA
1" FIPT
205TF
Flow Rate - GPM
MODEL
SIZE
.25
205 Series
1”
5.40 3.82 3.00 2.20 1.90°
2
5
10
15
20
30
3.10
5.10
IRRITROL 2500 SERIES ELEC. VALVE ELECTRIC VALVE
IDEAL FOR DIRTY WATER APPLICATIONS Flow Rate - GPM FRICTION LOSS DATA 1” 2500 Globe Valve, FIPT
2500T
1” 2500 Globe Valve, FIPT w/FC 2500TF
78
MODEL
SIZE .25
2500 Series
1”
2
5
10
15
5.40 3.82 3.00 2.20 1.90°
20
30
3.10
5.10
IRRITROL ULTRA-FLOW ELEC. VALVE ULTRA-FLOW VALVE Self-flushing, 150 mesh stainless steel filter straight-though flow path provides a flow range with minimal friction loss. FRICTION LOSS DATA
Flow Rate - GPM
¾"
700B-.75
MODEL
SIZE 0.1
1"
700-1
700B-.75
¾” 0.38 0.38 0.86 1.22 2.03 3.27 6.75
2
5
10
15
20
30
IRRITROL 200 COMMERCIAL VALVE ELECTRIC VALVE FLOW CONTROL
Bottom inlet plug and O-ring seal make this valve easy to convert from globe to angle. Rugged, double-beaded Santoprene® diaphragm ensures a leak-proof seal.
FRICTION LOSS DATA MODEL SIZE GLOBE ANGLE
1”
214B
1-½"
216B
2"
217B
216B 217B
1 ½” 2”
G A G A
Fl ow Rate - G PM 20
30
40
50
60
80
3.04
2.66
2.76
2.24
2.00 2.00
100 120
2.33
2.97
4.14
5.62
1.99
2.30
3.10
4.42
1.93
1.73
1.55
1.68
2.99 4.85
6.31
1.93
1.73
1.55
1.59
2.15
4.88
3.27
IRRITROL CENTURY COMMERCIAL VALVE COMMERCIAL VALVE
ANTI/COM VALVE
1"
100P1
102P1
1-½"
100P1.5
-
2"
100P2
-
3"
100P3
-
FRICTION LOSS DATA
Flow Rate - GPM
RATED FOR MODEL SIZE GLOBE 5 10 20 30 40 50 ANGLE 200 PSI 100P1 G 6.30 4.20 3.20 4.10 7.20 10.90° 1” 102P1 A 6.30 4.20 3.10 2.70 4.80 7.90° GLOBE MODEL SIZE ANGLE 30 40 50 60 70 80 90° 100 110 G 1.60 2.30 3.60 5.20 7.00 9.20 11.70 14.40 17.50 100P1.5 1 ½” A 1.30 1.60 2.80 4.00 5.50 7.10 9.00 11.00 13.30 GLOBE
MODEL SIZE ANGLE 80 90° 100 110 120 130 140 150 175 G 2.10 2.70 3.30 4.00 4.80 5.60 6.50 7.50 8.60 100P2 2” A 1.20 1.60 2.00 2.40 2.80 3.30 3.90° 4.40 5.00 GLOBE
Self-cleaning/easy maintenance, each cycle cleans internal orifices. All parts are easily accessible without removing the valve.
MODEL SIZE ANGLE 150 175 200 225 250 275 300 G 2.50 3.00 4.10 5.30 6.70 8.30 10.10 100P3 3” A 1.90° 2.40 3.30 4.30 5.50 6.90° 8.50
IRRITROL 2700 SERIES COMBINATION VALVE AVB BONNET FC
AVB STEEL SCREW FC
¾"
2711DPR
2711APR
1"
2713DPR
2713APR
BUILT IN BACK FLOW PREVENTION (DCVA required in CRD)
ONLY USED FOR REPAIRS NOT FOR NEW INSTALLS
79
TORO P220 SERIES COMMERCIAL VALVE 220 PSI ELECTRIC VALVE
BRASS EL. VALVE
1"
P220-26-04
220-26-04
1-½"
P220-26-06
220-26-06
2"
P226-26-08
226-26-08
3"
P226-26-00
226-26-00
Size
Configuration
5
10
20
30
40
1" (25mm)
Globe Angle
4.00 4.20 4.00 4.20
3.20 3.10
4.10 2.70
7.20 10.90° 4.z80 7.90°
1½" (40mm)
Globe Angle
1.60 1.30
2.30 1.60
2" (50mm)
Globe Angle
3" (75mm)
Globe Angle
50
3.60 2.80
60
70
80
90°
100
110
5.20 7.00 9.20 4.00 5.50 7.10
11.70 9.00
14.40 17.50 11.00 13.30
2.10 1.20
2.70 1.60
3.30 2.00
4.00 2.40
120
130
140
150
180
200
225
250
275
300
2.50 3.00 4.10 1.90° 2.40 3.30
5.30 4.30
6.70 8.30 10.10 5.50 6.90° 8.50
4.80 5.60 6.50 7.50 8.05 2.80 3.30 3.90° 4.40 5.10
HYDRO-RAIN ELECTRIC VALVE
1" FIPT
JAR TOP VALVE
AUTO VALVE W F/C
HRJ-100-FF
HRV-100-FF
1" SLIP
HRJ 100 is easy to service with a threaded lid design that needs no tools for removal. Hydro-Rain HRV series valves are built for long life under multi operations daily water cycles. Hydro-Rain sprinkler valves are built for use in variable landscapes including turf, shrub, desert, nursery stock, greenhouse, etc.
HRV-100-SS
DRIP ZONE KITS
1"
80
Medium-Flow (2-20gpm) Drip Zone Kit
Commercial Flow (3-20gpm) Range Basket Filter and Pressure Regulator
Residential Control Zone Kit (3-15 gpm)
Res Low Flow Control Zone Kit (2-10gmp) with filter
Light Commercial Drip Zone kit
2500DK-1-MF
XCZ-PRB-100COM
XCZ-100-PRF
XCZLF-100-PRF
XCZ-100-PRBLC
Brick (1 of 4)
• Filtration: 200 mesh filter
OPERATING RANGE
HRZ 100 Valve .700 HRZ 100 Tubing Adapter
• Dimensions: - Height 5 1/2" (13,9 cm) - Length 9 3/8" (23,8 cm) (without optional .700 adapter) - Width 3" (7,6 cm)
Finish Grade
• Flow: 0.1 to 5.0 GPM (0,4 to 18,9 LPM)
30" LinearELECTRICAL LengthSPECIFICATIONS Dry Splice Connector • 24 VAC 50/60 HZ (Cycles/Sec) Solenoid of Wire Coiled
PVC SCH 40 ELL
HRZ100 ALL IN ONE VALVE FILTER PRV Schedule 40 Female Adapter
HRZ 100-30
FLOW (GPM)
31.3
0.2
32.1
1.0
35.3
2.0
40.2
3.0
46.0
4.0
52.3
5.0
INLET PRESSURE (BAR)
FLOW (LPM)
2,1
0.8
2,2
ELECTRICAL SPECIFICATIONS PVC SCH 40 ELL
• 24 VAC 50/60 (Cycles/Sec) Solenoid 2 IN HZ 1 FILTER/ MIPT FILTER/ • Holding Current: .19 A (4.6VA) at VALVE 60 HZ 30 PSI
3,2
15.1
3,6
18.9
HRZ 100 Valve
50
.700 HRZ 100 Tubing Adapter
45
40
Lateral Pipe
35
0.0
1.0
2.0
3.0
4.0
Flow Rate [GPM]
(ph) 888-493-7672 (fx) 801.203.1179
u
techservice@hydrorain.com
u
6.0
25 Union Avenue, North Salt Lake, UT 84054
PVC SCH 40 TEE or ELL
PVC Schedule 80 Toe Nipple (Length as Required)
5.0
HRZ 100 Pressure Regulator 3" Minimum Depth of 3/4" Washed Gravel
Filter
www.rainbird.com/valves
DVF Series
11.3
u
55
HRZ 100 CUTAWAY
PRV 30 PRV/ELECTRIC • Inrush Current: .30 APSI (7.2VA) at 60 HZ
• Coil Resistance: 42–55 OHMS Valves Valves
7.6
2,8
HYDRO-RAIN
HRZ 100 Filter
INLET PRESSURE REQUIRED TO MAINTAIN 30 PSI OUTLET PRESSURE
3.8
2,4
Pressure Regulator
Water Flow Path
Inlet Pressure [PSI]
INLET PRESSURE (PSI)
PVC Mainline
Valve Box with Cover
1" Valve
industry’s first “one piece” low-flow irrigation zone valve, filter, and regulator combi• Filtration: 200 mesh filter nation. On the outside, the HRZ control zone beats the competition’s PVC construc• Dimensions: tion hands down by offering the strength, durability and environmental friendliness of - Height 5 glass-filled 1/2" (13,9 cm)polypropylene. The internals are just as impressive. commercial-grade, - Length 9 3/8" (23,8 cm) (without optional .700 adapter) - Width 3" (7,6 cm)
3" Minimum Depth of 3/4" Washed Gravel
Filter
• Coil Resistance: 42–55 OHMS
Brick (1 of 4)
HRZ 100-30
¾" x 1"
PVC SCH 40 TEE or ELL
PVC Schedule 80 Toe Nipple (Length as Required)
HRZ 100 CUTAWAY
• Holding Current: .19 A (4.6VA) at 60 HZ
• Regulated Pressure: 20 PSI (1,5 BAR), An industry The HRZ40Series drip control zone lays claim to being the 30 first. PSI (2,1 BAR), PSI (2,7all-in-one BAR)
DVF Series
HRZ 100 Pressure Regulator
PVC Mainline
• Inrush Current: .30 A (7.2VA) at 60 HZ
• Inlet Pressure: 20 to 120 PSI (1,4 to 8,3 BAR)
1"
Lateral Pipe
INSTALLATION SPECIFICATION DETAIL
www.rainbird.com/valves
1" Valve
INLET PRESSURE HRZ-100-FR-30 Flow 075-DV (PSI) gpm ⁄ " psi DV and DVF Valve Pressure Loss (psi) 3
4
HRZ-100-PF-BL 31.3 1 3 5 10 20 30 40
3.2 3.9 4.2 5.0 7.7 -
32.1
FLOW HRZ-100-VFR-30 075-DV 100-DV/100-DVF 075-DV (GPM) Flow ⁄ " psi 1" psi⁄ " bar m3⁄h l/m
DV andLoss DVF(psi) Valve Pressure Loss (bar) DV and DVF Valve Pressure 100-DV/100-DVF Flow 1"gpm psi 3.31 3.63 3.85 3.810 5.120 6.430 8.640
0.2 1.0
3
3
4
3.2 0.23 3.9 0.60 4.2 1.20 5.0 3.60 7.7 4.50 -6.00 -9.00
4 10 20 60 75 100 150
4
3.3 0.22 3.6 0.26 3.8 0.29 3.8 0.45 5.1 0.53 6.4 8.6 -
DV andMETRIC DVF Valve Pressure Loss (bar)
METRIC
Valves
100-DV/100-DVF Flow 075-DV 3 Water l/m 1"m3⁄h bar ⁄4" bar 0.23 0.23 4 Flow Path 0.22 0.24 0.60 10 0.26 0.26 1.20 20 0.29 0.32 3.60 60 0.45 0.35 4.50 75 0.53 0.41 6.00 100 0.59 9.00 150 -
100-DV/100-DVF 1" bar 0.23 0.24 0.26 0.32 0.35 0.41 0.59
DVF Series
Valves
Pressure Regulator
PGA Series Valves DVF Series
INLET PRESSURE REQUIRED TO MAINTAIN 30 PSI OUTLET PRESSURE
Versatility at an affordable price. RAIN BIRD DV SERIES COMMERCIAL VALVE 2.0
100-DV/DVF Angle, MxB Valve Pressure Loss (psi) 100-DV/DVF Angle, MxB 100-DV/DVF Valve Pressure Angle, MxB LossValve (psi) Pressure Loss (bar)100-DV/DVF METRIC Angle, MxB Valve Pressure Loss (bar)
3.0
Angle 1" psi 2.8 3.0 3.2 3.9 4.3 5.4 8.2
1 3
46.0 5 10 20 30 40
Male Flow x barb 1"gpm psi 2.51 2.93 3.05 3.110 4.320 7.430 12.7 40
l/m 4 10 20 60 75 100 150
MaleAngle x barb 1" psi 1" bar 2.5 0.19 2.9 0.20 3.0 0.22 3.1 0.28 4.3 0.30 7.4 0.35 12.7 0.56
Male Flowx barb 1"m3/h bar 0.17 0.23 0.19 0.60 0.21 1.20 0.26 3.60 0.30 4.50 0.44 6.00 0.86 9.00
55
l/m 4 10 20 60 75 10050 150
Angle 1" bar 0.19 0.20 0.22 0.28 0.30 0.35 0.56
METRIC
Male x barb 1" bar 0.17 0.19 0.21 0.26 0.30 0.44 0.86
• Inrush current: 0.41 A (9.84 VA) at 60 Hz Whether the job calls for a globe or angle DV and DVchoice. and DVF Valve Pressure Loss (psi) DV DVFVA) Valve Pressure Loss (psi) • Holding current: 0.28and A (6.72 at 60 Hz valve, PGA Series valves are the right 5.0 Loaded • Coil075-DV resistance: 30-39 Flow PVC FlowOhms100-DV/100-DVF 075-DV Flow VALVE C/Wwith features, these heavy-duty 3 3 gpm ⁄4" psi gpm 1" psi ⁄4" psi easy to install and built VALVE FOR m3⁄h ECONOMICAL IRRIGATION FCvalves SxS are economical, FLOWto withstand constant 150 psi (10,35 Models 0.23 1 3.2 1 bar) 3.2 3.3 pres-COMMERCIAL RESIDENTIAL AND LIGHT 45 (LPM) 0.60 3 1” 3WHERE 3.9 3.6 sure and 2 to 150 gpm (0,45 to 34,05 m3/h; FLOW •CONTROL APPLICATIONS 100PGA (26/34) 3.9 1.20 5 4.2 5 4.2 3.8 0.8 7,8 to 568 l/m) flows. 1 1 ⁄2” (40/49) IS REQUIRED. • 150PGA 3.60 10 5.0 10 5.0 3.8 40 3.8 The PGA Series from Rain Bird – built to last… • 200PGA 2” (50/60) 4.50 20 7.7 20 7.7 5.1 BSP threads available; specify when ordering. 7.6 and last! 6.00 30 30 6.4 9.00 40 40 8.6 35 100DVFSS 11.3 Dimensions Pressure: 15 to 150 PSI Features 4.0
52.3VALVE C/W
Flow Angle 1" psi m3/h 0.23 2.8 0.60 3.0 1.20 3.2 3.60 3.9 4.50 4.3 6.00 5.4 9.00 8.2
Valves
Flow 40.2 gpm
Valves
35.3
Note: See Xerigation section (page 205) for RBY Filter flow loss data Note: See Xerigation section (page 205) for RBY Filter flow loss data
FC TxT
Note: DV/DVF Male x barb not recommended for flows exceeding Note: 30 gpm DV/DVF (6.81Male x barb not recommended for flows exceeding 30 gpm (6.81 m3/h, 113.56 l/m)
2,1
100-DVF-SS 100-DVF
100-DVF
2,2 2,4
1"
100DVF 2,8 3,2
15.1
100-DVF-SS
Inlet Pressure [PSI]
m3/h, 113.56 l/m)
INLET PRESSURE (BAR)
Size
Height
Length
Width
• Globe and angle configuration0.0 for flexibility 1.0 2.0 6.0 1 ⁄4” (18,4 cm)4.051⁄2” (14,05.0 cm) 31⁄4” (8,3 cm) 100PGA 73.0 3,6 18.9 in design and installation. 3 1 ⁄ 4” (17,2 cm) 3 ⁄ 2” (8,9 cm) 150PGA 8” (20,3 cm) 6 [ ] Flow Rate GPM • Rugged PVC construction 100-DV/DVF Angle, MxB10” Valve 100-DV/DVF (psi) Angle, MxB 100-DV/D Lo (19,7 cm) 5” (12,7 cm)Valve Pressure 200PGA (25,4Pressure cm) 73⁄4”Loss • Filtered pilot flow to resist debris and Note: The PRS-D option adds 2” (5,1 cm) to valve height. Flow Flow Angle Flow Male x barbAngle 89 89 u The Intelligent Use of The Intelligent Useclogging of Water. uWater. u techservice@hydrorain.com HYDRO-RAIN (ph) 888-493-7672 (fx) 801.203.1179 25 Union Avenue, North Salt Lake, UT 84054 of solenoid ports. gpm 1" psi gpm 1" psi 1" psi m3/h • Slow closing to prevent water hammer and 0.23 1 2.8 1 2.5 2.8 subsequent system damage. 3 ELECTRIC 0.60 3.0 3 2.9 3.0 • Manual internal bleed operates the PGA 3.2 Series Valve5Pressure3.0 Loss (psi) 3.2 VALVE 1.20 5 valve Whether the job calls without allowing water intofor theavalve 3.60 10 box. Flow 3.9 100100- 10 150150-3.1 200- 3.9 200gpm PGA PGA PGA PGA PGA PGA globe orsolenoid angle valve, • One-piece design PGA with 20 captured 4.50 4.3 4.3 Globe 4.3 Globe Angle 20 Globe Angle Angle plunger springare for the easyright servicing. 1" 1" 1 ⁄ "7.4 2" 2" Seriesand valves 6.00 30 5.4 301 ⁄ " 5.4 1 5.1 4.3 Prevents Loaded loss of parts during field40service. 9.00 8.2 40-8.2 choice. with features, 5 5.5 5.0 - 12.7 10 5.9 5.5 • Non-rising flow control handle adjusts these heavy-duty PVC valves Note: See Xerigation section (page 205) for RBY Note: Filter See flow Xerigation loss data section (page 205) for RBY Filter flow lo 20 6.0 5.6 water flows as needed. 30 not recommended 6.4 5.5 for 1.9DV/DVF 1.3Male30 - not Note: DV/DVF Male x barb Note: flows exceeding x barb gpm (6.81 recommended for flows exce are economical, easy to install 100PGA 40 7.0 7.5 m3/h, 3.2113.56 2.0 1.2 1.0 • Normally closed, forward flow design. m3/h, 113.56 l/m) l/m) 100-DVF-A
100-DVF-A 100-DVF-MB
100-DVF-MB
RAIN BIRD PGA COMMERCIAL VALVE ™
™
1
1" 1-½"
150PGA
2"
200PGA
and built to withstand constant 150 psi
Options (order separately)
50 75 100 125 150
-
-
2
4.8 11.1 19.2 -
1
2
3.0 6.5 11.7 -
1.5 3.0 5.5 8.6 12.0
0.9 1.7 3.0 4.8 6.5
• Accommodates optional, field installed PRS-D pressure regulating module. PGA Series Valve Pressure Loss (bar) • Optional purple flow control handle for easy identification of non-potable water Flow Flow 100- 100- 150- 150- 200- 200m3⁄h I/m PGA PGA PGA PGA PGA PGA system. 100-DVF Globe Angle Globe 100-DVF Angle Globe Angle 100-DVF-SS 2,5cm 2,5cm 3,8cm 3,8cm 5,1cm 5,1cm - PGA-NP-HAN (1” and 11⁄2”) 0,23 3,8 0,35 0,30 - PGA-NP-HAN2 (2”) 0,6 10 0,36 0,32 PGA Serie 1,2 20 0,38 0,35 • Accepts latching solenoid for use with Rain 3 50 0,41 0,38 Water Temp Bird battery-operated controllers up to 150 6 100 0,43 0,38 0,10 0,07 -
81 73˚ F
(23˚ C
VALVE PRESSURE REGULATOR FITS TORO 220 BRASS AND P220 PLASTIC ELECTRIC VALVES
0 - 100 PSI REGULATOR
EZR-100
FITS IRRITROL 100, 200 AND 700 SERIES ELECTRIC VALVES
15 - 100 PSI REGULATOR
OMR-100
FITS RAIN BIRD PGA, PEB, PESB ELECTRIC VALVES
15 - 100 PSI REGULATOR
PRSDIAL
VALVE SOLENOID FITS MOST IRRITROL AND TORO VALVES BUT OPENS AT .12 AMPS INCREASING WIRE RUNS LOW WATTAGE SOLENOID
FITS IRRITROL AND TORO VALVES STANDARD 24V SOLENOID
LWS
FITS HUNTER VALVES
FITS RAIN BIRD DV 100 VALVES STANDARD 24V SOLENOID
RPKSOLENOI
PGA/PEB SOLENOID
SOLASSG4
FITS HYDRO-RAIN, IRRITROL AND TORO VALVES HRJ SERIES SOLENOID
HRJ-SOL
HRB SERIES SOLENOID
HRB-SOL
SOLENOID 13 VOLT DC LATCHING
HRC-990S
FOR BATTERY CONTROLLERS TORO DC SOLENOID RAIN BIRD DC SOLENOID
82
DCLS-P TBOSPSOL
R811-24VAC
AC SOLENOID
606800
SOLENOID, DC LATCHING
458200
110 VOLT FITS MOST IRRITROL AND IRRITROL VALVES 110 V SOLENOID
504-059
Features & Benefits Flow Monitoring Even In Flows FLOWEffective SENSOR Less Than 5 GPM (19 LPM)
Effective in ranges from 1.2 GPM to 500 GPM FLOW (4,5-1892 LPM). Teamed with the Toro TMC-424, ½”, SENSOR ¾” and 1” (12mm, 20mm, 25mm) sensors provide a cost-effective flow monitoring and alarm system.
Compatible With Competitive Controllers
In the TORO compatible controllers – ½" addition toTFS-050 TMC-424E, TIS-PRO, ¾" TFS-075 Sentinel® and SitePro® – these flow sensors work with any controller or control system 1" TFS-100 compatible with frequency output flow sensors (pulses 1-½" TFS-150 per second proportional to flow velocity). 2"
TFS-200
3"
TFS-300
4"
TFS-400
Model • TFS-050 • TFS-075 • TFS-100 • TFS-150 • TFS-200 • TFS-300 • TFS-400
TFS Series Model List Suggested Operating Description Range: 1/2” (13mm) Flow Sensor 1.2-12 GPM (4,5-45 LPM) 3/4” (20mm) Flow Sensor 2.7-28 GPM (10,2-65 LPM) 1” (25mm) Flow Sensor 5-50 GPM (18,9-189 LPM) 1½” (37mm) Flow Sensor 5-100 GPM (18,9-379 LPM) 2” (50mm) Flow Sensor 10-200 GPM (38-757 LPM) 3” (75mm) Flow Sensor 20-300 GPM (76-1135 LPM) 4” (100mm) Flow Sensor 40-500 GPM (151-1892 LPM)
• Socket end tee • Output: 2-wire, unscaled pulse – pulse width +/- 25% • Frequency: 3.2 to 200 Hz • Pressure Rating: - 1/2”, 3/4” and 1”(13, 20 and 25mm): up to - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm up to 100 psi (6,8 Bar) • Temperature Rating: Up to 140º F (60º C) • Flow Range (Velocity): - 1/2”, 3/4” and 1”(13, 20 and 25mm): 2’-20’ (0,6-6,0m) per second - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm 0.5’-30’ (0,1-9,1m) per second • Accuracy: - 1/2”, 3/4” and 1”(13, 20 and 25mm): +/- 3 - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm • Linearity/repeatability: - 1/2”, 3/4” and 1”(13, 20 and 25mm): ± 1.5 - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm • Tee: - 1/2”, 3/4” and 1”(13, 20 and 25mm): Sche - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm Schedule 80 PVC • Sensor Housing: Potted, PPS • Impeller: - 1/2”, 3/4” and 1”(13, 20 and 25mm): 300S - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm Glass-filled nylon • Shaft: Tungsten Carbide • Bearing: UHMWPE • Wires: 18AWG direct burial shielded cable
Warranty • Two years
Specifying Information—TFS TFS-XXX Model TFS TFS—Flow Sensor
Configuration XXX 050—1/2” (13mm) Plastic Tee 075—3/4” (20mm) Plastic Tee 100—1” (25mm) Plastic Tee 150—1 1/2” (37mm) Plastic Tee
200—2” (50m 300—3” (75m 400—4” (100m
83
LOW VOLTAGE WIRE MULTI-STRAND WIRE 2 CONDUCTOR
18-2
3 CONDUCTOR
18-3
4 CONDUCTOR
18-4
5 CONDUCTOR
18-5
7 CONDUCTOR
18-7
9 CONDUCTOR
18-9
10 CONDUCTOR
18-10
12 CONDUCTOR
18-12
13 CONDUCTOR
18-13
ALL WIRE IS ALSO AVAILABLE IN CUSTOM LENGTHS
CONDUIT PVC CONDUIT 10’
½”
COND-005
¾”
COND-007
1”
COND-010
CONDUIT FITTINGS FEMALE ADAPTER
MALE ADAPTER
SWEEP ELBOW
½”
435-005C
436-005C
406-005S
¾”
435-007C
436-007C
406-007S
1”
435-010C
436-010C
406-010S
1-½”
-
436-015C
-
LIGHTING WIRE 10 GAUGE
GAUGE WIRE
12 GAUGE
WHITE 12 GAUGE
ft.
10-2-FT
12-2-FT
12-1W-FT
250’
10-2-250
12-2-250
-
500’
10-2-500
12-2-500
12-1W-500
1000’
10-2-1000
12-2-1000
12-1W-1000
84
ft.
500’
1000’
WHITE
14-1W-FT
14-1W-500
14-1W-1000
BLACK
14-1B-FT
14-1B-500
14-1B-1000
GREEN
14-1G-FT
14-1G-500
14-1G-1000
RED
14-1R-FT
14-1R-500
14-1R-1000
BLUE
14-1BL-1000
PURPLE
14-1P-1000
YELLOW
14-1Y-1000
ORANGE
14-1O-1000
WIRE CONNECTOR 14G - 22G SPEED SEAL
12G - 18G SPEED SEAL
6G - 12G SPEED SEAL
SINGLE
HR-ORANGE1
HR-BLUE1
HR-TAN1
BAG
HR-ORANGE-25
HR-BLUEBAG20
HR-TANBAG15
HR-BLUEJUG
HR-TANJUG
LARGE BAG HR-ORANGEJUG
Hydro-Rain’s SpeedSeal® UL 486D connectors: easy, waterproof, and corrosion-proof. Perfect for quick, single-step wire splicing in any condition.
NON-WATER PROOF CON.
ORANGE
8G-14G SINGLE HEAT SHRINK
HS-4B
8G-14G 4 PACK HEAT SHRINK
HS-4
14G-10G HEAT SHRINK
STAKONS
DIRECT BURY SILICONE GORILLA NUT
DBRY
DIRECT BURY SILICONE GORILLA NUT 100PK
DBRY-100
DRYCONN BLACK
DCB
NON-FILLED
DBRY
HEAT SHRINK
DCB
WIRING DISTANCES IN FT. Wire size is another important factor in determining voltage drop. Larger wire sizes (those with a greater diameter) will have less voltage drop than smaller wire sizes of the same length. In American wire gauge, every 6 gauge decrease gives a doubling of the wire diameter, and every 3 gauge decrease doubles the wire cross sectional area. In the Metric Gauge scale, the gauge is 10 times the diameter in millimeters, so a 50 gauge metric wire would be 5 mm in diameter. Still another critical factor in voltage drop is wire length. Shorter wires will have less voltage drop than longer wires for the same wire size (diameter). Voltage drop becomes important when the length of a run of wire or cable becomes very long. Usually this is not a problem in circuits within a house, but may become an issue when running wire to an outbuilding, well pump, etc.
16 GAUGE Watts
"Approx Fixtures (4watts ea)"
4 8
12 GAUGE
12V
13V
14V
15V
12V
13V
14V
15V
12V
1
1485
2035
2585
3135
5063
6938
8813
10688
2
743
1018
1293
1568
2531
3469
4406
5344
12
3
495
678
862
1045
1688
2313
2938
3563
16
4
371
509
646
784
1266
1734
2203
2672
20
5
297
407
517
627
1013
1388
1763
2138
24
6
248
339
431
523
844
1156
1469
1781
28
7
212
291
369
448
723
991
1259
1527
32
8
186
254
323
392
633
867
1102
1336
36
9
165
226
287
348
563
771
979
1188
40
10
149
204
259
314
506
694
881
1069
50
13
119
163
207
251
405
555
705
855
60
15
99
136
172
209
338
463
588
713
70
18
85
116
148
179
289
396
504
611
80
20
74
102
129
157
253
347
441
534
90
23
66
90
115
139
225
308
392
475
100
25
203
278
353
428
322
120
30
169
231
294
356
140
35
145
198
252
305
160
40
127
173
220
180
45
113
154
196
200
50
101
139
250
63
81
111
300
75
68
93
10 GAUGE 13V
14V
15V
441
560
679
268
368
467
566
230
315
400
485
267
201
276
350
425
238
179
245
311
377
176
214
161
221
280
340
141
171
129
176
224
272
118
143
107
147
187
226
85
PIPE
PVC PIPE FITTINGS TO USE: PVC40 (Page 5 - 8) PVC LOCK (Page 12)
20 ft. STICK CLASS
20 ft. STICK SCH 40
½"
PVC200-005
PVC40-005
¾"
PVC200-007
PVC40-007
1"
PVC200-010
PVC40-010
1-¼"
PVC160-012
PVC40-012
1-½"
PVC160-015
PVC40-015
2"
PVC160-020
PVC40-020
3"
PVC160-030
PVC40-030
1-½”
PVC200-015-CSA
4"
PVC160-040
PVC40-040
2”
PVC200-020-CSA
ALSO AVAILABLE IN 5 FOOT INCREMENTS
CSA PIPE 20FT
CSA DRAINAGE PIPE SOLID DRAIN PIPE
PERFORATED DRAIN PIPE
3"
DPVC-030-CSA
DPVC-030P-CSA
4"
DPVC-040CSA
DPVC-040P-CSA
FITTINGS TO USE: PVC Drainage (Page 19 - 20)
POLY/MUNI PIPE 100 ft. ROLL POLY
200 ft. ROLL POLY
100 ft. ROLL MUNI
½"
P100-005
¾"
P100-007
P200-007
1"
P100-010
P200-010
1-¼"
P75-012
P200-012
1-½"
P75-015
P75-015-250
P200-015
2"
P75-020
P75-020-200
P200-020
86
200 ft. ROLL MUNI P200-007-200
POLY PIPE boasts a 100 PSI pressure rating Municipal Poly is rated for 200psi and is CSA approved for water services
FITTINGS TO USE: INSERT for POLY (Page 10) PHILMAC for MUNI (Page 17)
THE FUTURE OF IRRIGATION THE FUTURE OF IRRIGATION
FLEX PIPE
200 psi rating for sizes ¾” and up
Built for Speed™
50 ft.BYROLL 1"
FLEX010-50
1-½"
FLEX015-50
2" ® 1/2" (1,3 cm) Fittings
FLEX020-50
IONS
Built for Speed™
GREAT FOR WATER TYPICAL SPRINKLER INSTALLATION GARDENS. OUT SPECIFICATION DETAIL LASTS OTHER KINK Working in a sprinkler trench is tough enough—don’t make it Lawn FREE TUBING
TYPICAL SPRINKLER INSTALLATION rking pressure: 80 PSI (5,5 Bars)FLEX030-50 at 72°F (23°C) 2-½" SPECIFICATION DETAIL ressure: Exceeds 220 PSI (15,2 Bars) g Pressure: 10-80 PSI (0,69-5,5 Lawn Bars) aterial: ABS Finish Grade g Ring Material: Stainless Steel terial: EPDM Use at Side Inlet Optional
rking pressure: 125 PSI (8,5 Bars) at 72°F (23°C) (37985) ressure: Exceeds 250 PSIBLJ-050-BM-50 (17,2 Bars) 100 ROLL OF IRRIGATION THEft. FUTURE g Pressure: 10-125 PSI (0,69-8,6 Bars) BLP-050-CL-1X ½" PEX-005 (37980) aterial: ABS g Ring Material: ¾" Stainless Steel PEX-007 BLE-050-BL-ST (37970) terial: EPDM
BL Fittings:
PEX-010
1"
THE FUTURE OF IRRIGATION
Simply stated, Blu-Lock by Hydro-Rain is the fastest, greenest, BLP-050-CL-1X (37980) irrigation installation method in the world.
BY BLT-075-BB-50 rking Pressure: 150 PSI (10,3 Bars) at 72°F (23°C) (37373) ressure: Exceeds 350 PSI (24,1 Bars) g Pressure: 10-150 PSI (0,69-10,3 Bars) BLP-075-SL-20 SPECIFICATIONS aterial: ABS (37381) • Blu-Lock® 1/2" Steel (1,3 cm) Fittings g Ring Material: Stainless 3/4" (1,9 Cm) working pressure: 80 PSI (5,5 Bars) at 72°F (23°C) EPDM· Max Eterial: LOSS PIPE PRESSURE LOSS
¾”Pressure: x 100’ExceedsBLP-007 · Burst 250 PSI (17,2 Bars) 4 2.41 1.64 ) & 3/4" ( 1,90 cm) Blu-Lock Lateral · Working PSIPipe: (0,69-8,6 Bars) ¾” xPressure: 300’ 10-125 BLP-007-300 0.76 5 3.01 2.46 ressure Rating: 320Material: PSI (22,06 Bars) at 72°F (23°C) · Body ABS 1” x6 100’ BLP-010 · Retaining Ring Material: 1.06 100 3.61 Stainless 3.45Steel g Pressure: PSI (6,89 Bars) · Seal EPDM 1”Material: x(2,4 mensions: cm), 1"4.21 1.21BLP-010-300 (3,074.59 cm) 1.37 3/4" .944 7 300’
3.85
m Pressure
6.62
10.60
(37381)
PHILMAC (Page 17)
BLP-007B 5 7
protects thePSI environment and · Burst1.06 Pressure: Exceeds6 250 (17,2 Bars) 2.23 installation 3.61 3.45 the long-term health · Working Pressure: 10-125 PSI (0,69-8,6 Bars) BLE-050-BL-ST of your crew. (37970) 2.60 · Body 1.37 7 4.21 4.59 Material: ABS
8
2.97 · Retaining 1.80 Ring Material:8Stainless Steel 4.81
5.85
9
3.34
7.29
10
3.71
11
4.08 · Burst3.07 Pressure: Exceeds Bars) 11350 PSI (24,1 6.62
6
BLP-010B
380
FEATURES AND · Seal Material: EPDMBENEFITS
CUTAwAY 4.45 13 7.82 14.40 6 • 1/2" (1,3 cm) Blu-Lock Lateral and Swing 340 Pipe
2.23
9
2.76
10
5.41
BUILT FOR
BLT-075-BB-50 (37373)
6.02
8.85
· Working Pressure: 10-150 PSI (0,69-10,3 Bars) · Retaining Ring Material: Stainless Steel
436 tight for a strong, leak-proof connection. Flow Flow Velocity EPDM Pressure Flow Velocity Pressure (GPM) 5.2 · Seal Material: 5.10 8.42 16.50 (GPM) (FPS) Loss 14 (GPM) (FPS) Loss 360 Outside Diameter (OD) Technology —Flow (PSI) (PSI) is unimpeded •• 1/2" (1,3 5.76 cm) Blu-Lock Lateral and Swing 15 9.02 Pipe 18.70 3405.57 1
Velocity (FPS)
380
15
Inches
Inches
PSI
PSI
320
400
1” Insert Fitting
386
WHERE, U.S.A.
14
360
360 Stainless steel
340
340
13
436
5.2
7.82
14
360
14.40
5.10
14
8.42
16.50 320
320 300
304
280
7.42
PSI
320
20
HYDRO-RAIN 9.98 14.90 280
1” Blu-Lock™
u
1” Insert Fitting
Release Collar I.D. (Inside Diameter)
1.86 2.23 2.60 2.97
Barb Fitting
3
0.76
5
of your 6cre •1.06Hydro-Ra 1.3730-year lim 7 FEATURES
1.80
8
3.34
*Minimum burs 2.23• Heavy-Du 9 See specificati
3.71
2.76
4.08
3.07
4.45
3.85
4.83
4.45
Maximum Pressure
400 380
436
5.10
5.57
5.76
320
7.42 9.98
280
1” Blu-Lock™
UV-resista 10 and tested 11
12 • Patented tight for13a
5.2
300
25
technology
-
• Patented 0.46• And Both 4 feature quic installation
14
• Outside D 15 for 25 perc
326
9.90
PSIQua vS HYDRO • High pipe are PSIm
14.90
1” Insert Fitting
PSI 888-HYDRORAIN vS. FLOw RATE* INCREASED FLOwuRATES u (ph) (fx) 801.203.1179 www.hydrorain.com • Patented PSI
INCREASED FLOw RATES I.D. (Inside Diameter)
280
Blu-Lock™
9.90
300
25
Barb Fitting
304
1.48
340
20
300
-
360
15
340
www.hydrorain.com 9155.57 Overland5.76 Street, North 15 u ring. 15 Salt Lake, 9.02 UT 84054 18.70 retainer 326
Blu-Lock™
RESIDENCE
380
PSI
u
Stainless steel ring. 915 retainer Overland Street, North Salt Lake, UT 84054
u
PSI
CUTAwAY u (ph) 888-HYDRORAIN (fx) 801.203.1179 O-RAINBLU-LOCK
380
380
Maximum Pressure
400 BLU-LOCK CUTAwAY 13 4.83 4.45
PSI
Maximum Pressure * For non-constant pressure valve-out outdoor irrigation connections only.
Pressure Flow 25 perce •forBlu-Lock Loss (GPM) (PSI) recyclable
• - High Qual 1 • Blu-Lock - pipe are ma 2
-
for 25 326 percent increase in flow versus 0.60traditional 0.15 insert fittings.
1 · Operating - Pressure: -120 PSI (8,2 Bars) 1
14 8.42 16.50 320 2 20 7.42 · Pressure 9.90 loss at 6 GPM: 5 PSI (0,3 Bars) · Operating Pressure: 120 PSI (8,2 Bars) 300 300 2 2 1.20 0.48 PSI vS. FLOw RATE* 5.76 15 loss at 6 9.02 18.70 3 • High Quality and “Easy-Flex” —Blu-Lock lateral and swing · Pressure GPM: 5 PSI (0,3 Bars) 304 · Outer Dimensions: .59" (1,5 cm) 25 9.98 14.90 326 280 280 3 · Inner Dimensions: - (1,1 cm) 3 1.80 1.00 · Outer Dimensions: .59" (1,5 cm) 4 .43" pipe1”are made from and meet ASTM standards. Blu-Lock™ Barb Fitting 1” Blu-Lock™ Insert Fitting 9.90 PSIvirgin resins 1" 3/4" .08"0.46 (0,2 cm) 4 · Wall Thickness: 1.48 · Inner Dimensions: .43" RATE* (1,1 cm) 4 2.41 1.64 5 GPM GPM PSI vS. FLOw INCREASED FLOw RATES 14.90 • 5 Patented Quick-Release Collar —1/2" swing fittings 6 · Wall Thickness: .08" (0,2 cm) 1.86 0.76 cm) Blu-Lock 5 Lateral 3.01 2.46 • 1" (2,54 cm) & 3/4" ( 1,90 Pipe: 40 11 8 ™ 1” Insert Fitting I.D. (Inside Diameter) I.D. (Inside Diameter) PSI 1" 3/4" feature2.23 quick-release mechanism that allows tool-free removal. 0.50 1.10 Rating: 72°F (23°C) 3.45 7 6 · Burst Pressure 1.06 320 PSI (22,06 6 Bars) at 3.61 • 1" (2,54 cm) & 3/4" ( GPM 1,90 cm) Blu-Lock GPM Lateral Pipe: 50 13 9 1.06 · Working Pressure: 100 PSI (6,89 Bars) 8 0.45 1.00 • 7 Hydro-Rain · Burst Pressure Rating: 320 PSI (22,06 Bars) at 72°F (23°C) 2.60 1.37 7 4.21 4.59 warranty —3-year limited warranty on fittings, 40 11 8 eside Diameter) · Outer Dimensions: 3/4" 60 .944 (2,4 cm),14 1" 1.21 (3,07 10 cm) · Working Pressure: 100 PSI (6,89 Bars) 9 0.43 0.40 0.90 8 30-year 2.97 1.80 8pipe. Some 4.81 restrictions 5.85 limited warranty on apply. · Inner Dimensions: 3/4" .824" (2,1 cm), 1.07" (2,71 cm) 50 13 6 70 16 11 · Outer Dimensions: 3/4" .944 (2,49cm), 1" 1.21 (3,07 cm) 10 0.35 0.80 9 · Wall Thickness: 3.34 2.23 9 5.41 7.29 .060" (0,2 cm) *Minimum burst pressure varies according to pipe and fitting size. 11 60 14 .824" (2,1 10cm), 1.07" (2,71 cm) · Inner Dimensions: 3/4" 0.30 0.75 Foot: .074 lbs. * (0,03 Kg) 10· Wt. 3.71 2.76 6.02 8.85 Measured in10100' lengths See specifications for details. 0.75 · Wall Thickness: .060" (0,2 cm) 11 0.295 12 70 16 DM Seal 0.25 0.60 Maximum Pressure 11 non-constant 4.08 pressure 3.07valve-out outdoor * For connections 11 irrigation 6.62 10.60only. · Wt. Foot: .074 lbs. (0,03 Kg) 1” Blu-Lock™ 1” Insert Fitting Blu-Lock™ Barb Fitting 13 12 4.45 3.85 12 7.22 12.40 * Measured in 100' lengths 0.75 386
™
• Exclusive
• Patented straight le tight for a s( 3/4"
1" (2,54 Cm) 4.45(2,54 Cm) 3.85 1" 12 12.40 3/4"7.22 (1,9 Cm) · Body Material:Retaining ABS Maximum Pressure PIPEpipe PRESSURE LOSSBUILTPIPE P • Patented System —Stainless steel teeth grip FORD PIPE PRESSURE LOSS PIPE PRESSURE LOSS • Outside 4.83 4.45 13 7.82 14.40
5.10
400
FEATURES A • Patented free appro • Heavy-Dut •UV-resistan True Sys pipe, man and tested
FITTINGS USE: BLULOCK (Page 11) · Max Working Pressure: 150 PSI (10,3steel Bars) and atTO 72°F (23°C) seals UV-resistant ABS, stainless EPDM are designed BLP-075-SL-20 10.60 (37381) and tested to ensure toughness.
400
14
360
• Simply And Both stated irrigation ins installation of your crew
Construction—Built tough fittings made from •• 1"Heavy-Duty (2,5 cm) BL Fittings:
13
386
recyclable H
technology ensure lower friction loss for better efficiency. BLJ-050-BM-50 (37985) 0.46 4 2.41 1.64
1.48
Working in a BUILT FOR G harder by usi TYPICAL toxic glue, cla • Blu-Lock P a better way:
Everything yo • easier Blu-Lock with BF technology Lock system
¾” x 20’ BLP-007-20 • 3/4" (1,9 cm) BL Fittings: • And Both are Chemical —Glueless, tool-free 1.86 0.76 5 PSI (8,5Free 3.01 · 1” Max x working 125 Bars) at 72°F2.46 (23°C) (37980) 20’ pressure:BLP-010-20 BLP-050-CL-1X
4
400
· Retaining Ring Material: Stainless Steel 12 7.22 12.40 · Seal Material: EPDM
• True Syst pipe, manif
Trenchless Technology — Coil and 1" (2,54 Cm)• Exclusive Trench 3/4"and (1,9 Cm)SPRINKLER TYPICAL INSTALLATION straight pipe options provideLOSS unrivaled flexibility. PIPE PRESSURE LOSSlengthPIPE PRESSURE SPECIFICATION DETAIL
2.76 10Pressure:6.02 · Working 10-150 PSI 8.85 (0,69-10,3 Bars) 12 Maximum Pressure tant pressure· valve-out outdoor Body Material: ABS irrigation connections only. 11
BLT-075-BB-50 (37373)
• True System Integration—Total compatibility ofFITTINGS fittings, TO USE: • Exclusive for Speed™ BLP-075-SL-20 SHARKBITE (Page 18) pipe, manifolds, valves,Built saddles, and heads. straight len
mensions: 3/4" cm), 1.07" (2,71 cm) • 1" (2,5.824" cm)8(2,1 BL Fittings: 1.80 4.81 5.85 ckness: .060"· (0,2 Max cm) Working Pressure: 150 PSI (10,3 Bars) at 72°F (23°C) 2.23 9 5.41 7.29 · Burst : .074 lbs. (0,03 Kg) Pressure: Exceeds 350 PSI (24,1 Bars) 3.07
• Patented free approa
free approach cut installation time in half. BY
Loss ·120 (GPM) (FPS) Loss Body Material: ABS ng Pressure: PSI (8,2 Bars) BLUE (PSI) (PSI) · Retaining Ring Material: Stainless Steel e loss at 6 GPM: 5 PSI (0,3 Bars) PIPE 1 0.60 BLU-LOCK 0.15 · Seal Material: EPDM mensions: .59" (1,5 cm) - • 3/4" (1,9 cm) 2 1.20 0.48 BL Fittings: BLP-005 mensions: .43" (1,1 ½”cm) x 100’ Maxcm) working pressure: (8,5 Bars) at 72°F (23°C) 3 1.80 125 PSI1.00 ckness:- .08" ·(0,2 0.46
TH
BLE-050-BL-ST (37970)
SPECIFICATIONS Flow Velocity Pressure Flow Velocity Lawn Pressure •BUILT Blu-Lock® (1,3 cm) Fittings FOR GREEN ADvANTAGES (GPM) (FPS) Loss1/2" (GPM) (FPS) Loss · Max working at 72°FGrade (23°C) (PSI) pressure: 80 PSI (5,5 Bars)Finish (PSI) · Burst Pressure: Exceeds 220 PSI (15,2 Bars) • Blu-Lock Pipe is Green —Environmentally-friendly, 1 1 0.60 0.15 · Working Pressure: 10-80 PSI (0,69-5,5 Bars) recyclable HDPE pipe provides a superior alternative to PVC. BLACK BLUE · Body Material: ABS 2 2 1.20 0.48 Use at Side Inlet Optional BLU-LOCK3 PIPE -• Blu-Lock BLU-LOCK · Retaining Ring Material: Stainless SteelPIPE Fittings 3 are Green 1.80 —Outside 1.00 diameter (OD) · Seal Material: EPDM
BLU-LOCK PIPE
· Burst Pressure: Exceeds 220 PSI (15,2 Bars)
BUILT FOR S
PEX pipe canBUILT be used FOR SPEED ADvANTAGES for hot or cold water • Patented “Push-and-Go” Design—100% tool and chemical
Built for Speed™
Working Pressure: 10-80 PSIPressure (0,69-5,5 Bars) m) Blu-Lock and Swing Pipe Pressure · Lateral Flow Velocity
Working in a s harder by usin toxic glue, clam a better way: B
harder by using traditional pipe fitting methods that require hot, Finish Grade FITTINGS toxic glue, clamps or frustrating barbed fittings. Hydro-Rain offersTO USE: Everything you a better way: Blu-Lock. PVC40 (Page 5-8) easier with Blu Lock system, y Everything you do from theUse valve out, you can now do faster and at Side Inlet Optional easier with Blu-Lock. Primer? Glue? Clamps? Tools? With the BluSimply stated, Lock system, you don’t need them! BLJ-050-BM-50 (37985) irrigation insta
PEX PIPE
m) BL Fittings:
BY
40
1" GPM
3/4" 0.50 GPM
11
80.40
I.D. (Inside Diameter)
0.45
1.00
0.43
87
I.D. (Inside Diameter)
1.10
0.90
1.06
40
feature50qu
60 • Hydro-Ra
DRIP LINE
100'
500'
⅝”, 12” SPACING, TORO
DRIPPERLINE
½", 12" SPACING, TORO
½”, 12” SPACING, NDS
17MM, 12” SPACING, NETAF
Copper Shield Check Valve, Rainbird
DURA-FLO™ JR Dripperline
. The DURA-FLO™ JR Dripperline The emitter is self-cleaning .6 GPH XFS-CV-0612100 . comprises a drip emitter prewith built-in filter slits to mininserted into the 1/4" tubing at imize clogging. It is perma. .9 GPH SDL17-1209-100-Netaf XFS-CV-0912100 either 6" or 12" intervals. nently bonded to the inside of Do not exceed the maximum the tubing during the extru. 1 GPH SDL005-12RG-100 SDL005-12-100BR recommended length of run. sion process. Dual exit holes, 180° apart, are standard. . 1 GPH SDL005-12-500 SDL005-12RG-500 SDL005-12-500BR SDL17-1209-500-Netaf XFS-CV-0912500 MODELS MAXIMUM LENGTH OF RUN (FEET) . SLOPE BROWN BLACK SPACING . TUBE TUBE + 3% + 2% + 1% 0% - 1% - 2% - 3% SFJR-BR-06 SFJR-BL-06 6" 20 feet 20 feet 19 feet 19 feet 19 feet 18 feet 18 feet . SFJR-BR-12 SFJR-BL-12 12" 36 feet 35 feet 34 feet 33 feet 32 feet 31 feet 30 feet . positive (+) slope = downhill, negative (-) slope = uphill . Emitter line is a ¼” dripline with a flow rate of ½gph/6” and 1gph/12”. The turbulent flow path and ¼", 0.5 GPH, ¼", 0.5 GPH, Pressure psi 15 psi 20 psi psi 30 psi unique inletsame slit greatly It has the sturdy design as other10 Agrifim dripline5products making . 6" SPACING 12" SPACING reduces the risk of clogging. Discharge of Emitter .39 gph .47 gph .56 gph .63 gph .69 gph it flexible and easy to install. DURA-FLO™ JR Dripperline . is ideal for use as a soaker hose in ground cover, small . shrubs, vegetable gardens or planter boxes. . Always use a filter andForalarger . trees, a loop pressure regulator when can be made SDL-6-100BL SDL-12-100BL . using pourous hoseoff the 1/2" tubing (A700). . Parallel lines of DURA-FLO™ JR are shown . watering a small vegetable garden. 1/4" connectors (C250) are used to connect the . DURA-FLO™ JR to the supply tubing. . ¼" TUBING ¼" VINYL ¼" TUBING ¼" WHITE UV ½” POLY 1/8” TUBING . GP2 TUBING IN A BUCKET TUBING THIN WALL . . The ends of the DURAFLO™ JR are closed off . with a Goof Plug (GP2). . 1/4" connectors (C250), 1/4" tees (T250) and 1/4" elbows . (EL250) can be used with the
¼” EMITTER LINE
100'
MICRO TUBING
50' 100'
P250-50
P250-100
P250V-100
36
DURA-FLO™ JR Dripperline.
P250UV-100
P500-100
P500-500
500’ 1000'
The DURA-FLO™ JR can be attached to the MAXI-FLO™ P500-50 bubbler. For recommended length of runs see page 20.
P250-1000
xQ1000B
P250UV-1000 P185
2000’ 3/8" TUBING
per ft.
P455BR
250' BROWN
P455BR-250
88
¼” COLORED ¼” COLORED ¼” COLORED ¼” COLORED TUBING TUBING TUBING TUBING GREEN REDWOOD SAND WHITE
50'
P250-50GR
P250-50RD
P250-50SD
P250-50WH
T-FTT16
T-FTT16 T-FEE16
T-FEE16
T-FTF16 T-FTF16
T-FJA16 T-FJA16
T-FTF16
T-FJA16
T-FJJ16
T-FTV16
1
½"
AIR VACUUM RELIEF VAL.
2
¾"
FLUSH VALVE AUTO FLUSH
3
¾”
T-FAS16-1 FLUSH VALVE T-FAS16-1
4
8"
SHEPHARD STAKE
5
6"
WIRE U STAPLE 25 PACK
5
6"
WIRE U STAPLE 100 PACK
6
T-FAS16-1
T-FTS16
T-FTT16
T-FEE16
T-FAM16
T-FCC16
T-DL-MP9 T-DL-MP9 T-DL-MP9 T-FAS16 T-FAS16
T-FJJ16 T-FJJ16 T-FAS16 T-FTV16
1
AVRV50
T-FTF16
2
3
T-FJA16
T-FJJ16
T-FAS16
FCH-H-FHT
T-FTS16FCH-H-FIPT T-FTS16-1 T-FTS16
T-FTS16-1
T-FTS16-1
T-YD-500-34
S8
T-YD-500-34
S8U-100
T-PMR25-LF
T-FCH-H-FHTT-FCH-H-FHT T-PMR25-LF T-PMR25-LF T-FJQ16
FIG-8
FIGURE 8 END CAP
CLAMPS
T-FCH-H-FIPT
T-YD-500-34
T-FCH-H-FIPT
T-FAS16-1
5
T-IPS1500
T-FTS16
T-FJQ16
T-CA-710
T-CEFCH-H
T-FJQ16 T-CA-710
T-CA-710 T-CEFCH-H
T-CEFCH-H
6
T-FTS16-1
T-YD-500-34
T-FCH-H-FIPT
T-CA-710
T-CEFCH-H
T-SS6-50
T-SS6-50
T-SS6-50
T-FCH-H-FHT
T-PMR25-LF
T-FJQ16
Specifying Information— 0.710 OD Compression Fittings S p e cPart i f yNo. ing S I npfeocr imf ya itni ogn I— Description nformation— 0 . 7 1 0 OT-CA-710 D C0o. m pCompression r0e sOs D i oAdapter nC oF im OD1 ⁄t” tSpigot 7 pi rnegsss i o n F i t t i n g s 1
Part No.
T-IPS1500
T-IPS1500
T-FCH-H-FIPT
4
S8U-25
T-FCH-H-FHT
½"
T-FCC16
T-FTV16T-FTV16
T-FAM16
T-FCC16 T-FAM16
DRIPLINE ACCESSORIES T-FTT16
T-FAM16
T-FCC16
T-FEE16
Specifying Infor 0.710 OD Compres
2
T-CEFCH-H OD Compression Adapter with Flush Valve, 0.8 GPM, 2 psi Sealing Description
Part No.
Description
T-CA-710 OD Compression Adapter ⁄2” Spigot 1 T-CA-710 OD Compression Adapter 2” Spigot T-CEFCH-H OD Compression Adapter with psi Sealing S Flush p e cValve, i f y0.8 i nGPM, g I2⁄n fo rmation 1
Specifying Information— 5 ⁄8” L o c - E z e ® F i t t i n g s
S p e c i fPart y i nNumber g I n f o r m a t i o n — Description 5 f yF ii nt Tee ⁄8” L T-FTT16 o cS -pEezcei®Loc-Eze tgi nIgnsf o r m a t i o n — Loc-Eze Elbow T-FEE16
T-CEFCH-H OD Compression Adapter with Flush Valve, 0.8 GPM, 2 psi Sealing
Accessories
S p ePart c i Number f y i n gDescription Information T-YD-500-34 AirSVent— & Vacuum g In f o r mRelief a tValve ion A c c e s s op reic⁄e” iMIPT sf y iAirnRelease T-FCH-H-FIPT Flush Valve— ⁄ ” FPT (Pipe Thread), 0.8 GPM, 2 psi Sealing Pressure 1
Part No.
Descr
T-CA-710 OD Compression Adapter 1⁄2” Spigot T-CEFCH-H OD Compression Adapter with Flush
2
A c c einner s s o r i ecircumference s The term “Stepless” refers to the absence of steps or gaps on the of the clamp. T-FCH-H-FHT Flush Valve— ⁄ ” FHT (Hose Thread), 0.8 GPM, 2 psi Sealing Pressure S p e c iThe fying Info L o c Coupling -Eze Fittings T-FCC16 ⁄ ” Loc-Eze Part Number Description S pRelease e c i&fRegulator— y i n gRelief f psi o r1/10-8 m aGPM t i oLow-fl n— ⁄I”,n15 ow Pressure T-PMR15-LF Part Description T-YD-500-34 Air Vent— ⁄ ”Number MIPT Air Vacuum Valve T-FAM16 Loc-Eze x 1/2” MPT Male Adapter ingenious Stepless® design provides uniform compression and a 360° seal. Accessori T-FTT16 Loc-Eze Tee Part Number Description 25 Pressure Regulator— T-PMR25-LF ⁄ ” FPT (Pipe psipsi Sealing Pressure T-FCH-H-FIPT Flush Valve— T-FTV16 Loc-Eze x 1/2” Slip Adapter Tee ” L o⁄ ”0.8 cMIPT -GPM, E Air z⁄ ”,2eRelease F1/10-8 i &t tVacuum iGPM n gLow-fl sReliefowValve T-YD-500-34 Air ⁄Thread), Vent— 5
®
8
3
Part Number Description 1
T-FEE16 T-FCC16 T-FAM16 T-FTV16 T-FTF16 T-FJA16 T-FJJ16 T-FAS16 T-FAS16-1 T-FTS16 T-FTS16-1
3
4 4
3
2
3
5
4
8
1
3
4 4
®
3 Loc-Eze ⁄4”, 225psipsiSealing 2–20 GPM Medium-flow Pressure Regulator— T-PMR25-MF 3 Part Number T-FTT16Elbow Loc-Eze Tee T-FTF16 Loc-Eze x 1/2” FPT Tee ⁄4” FHT (Hose 0.8 Pressure T-FCH-H-FHT Flush Valve— 3 ⁄4” GPM, FPT3⁄4”, (Pipe Thread), 0.8Medium-fl GPM, 2 psi FlushThread), Valve— Loc-Eze Coupling 40Description psi 2–20 GPM ow Sealing Pressure Regulator— T-PMR40-MF PartT-FCH-H-FIPT Number T-FJA16 Loc-Eze x 3/4” MHT Male Adapter Loc-Eze Elbow T-FEE16 15 psi 1/10-8 Pressure Regulator—3⁄4”,Pressure T-PMR15-LF 3 GPM Low-flow ⁄4” FHT1⁄4(Hose 0.8 GPM, 2 psi ow Sealing Pressure T-YD-500-34 Flush Valve— T-FCH-H-FHT Loc-Eze x 1/2” MPT Male Adapter ” x 1”,Thread), 25 psi, 10–32 GPM High-fl Pressure Regulator—1 T-PR25-HF Loc-Eze 3 Loc-Eze x 3/4” MHT with Cap T-FCC16 T-FJJ16 Loc-Eze Coupling T-FTT16 Tee ⁄ 4”, 25 psi 1/10-8 GPM Low-fl ow Pressure Regulator— T-PMR25-LF 3 T-FCH-H-FIPT Loc-Eze x 1/2” Slip Adapter Tee x 3/4” FHT Hose Swivel with Screen ⁄4”, 15 psi 1/10-8 GPM Low-flow Regulator— T-PMR15-LF DL2000 Pop-up Operation Indicator T-DL-MP9 3 Pressure T-FAS16 Loc Loc-Eze 1/2”Eze MPT Male Adapter T-FAM16 Elbow T-FEE16 ⁄4”, 25 psi 2–20 GPM Medium-fl ow Regulator—Loc-Eze T-PMR25-MF Pressure 3 Loc-Eze x 1/2” FPT Tee x Loc T-FCH-H-FHT 5/8” (16mm) Figure-eight End Clamp T-FJQ16 T-PMR25-LF T-FAS16-1 x 3/4” FHT Hose Swivel with Washer 3 Pressure Regulator— ⁄4”, 25 psi 1/10-8 GPM Low-flow T-FTV16 Loc-Eze x Adapter 1/2”Eze Slip Adapter Tee T-FCC16 Coupling ⁄4”, 40 psi 2–20 GPM Medium-fl ow Regulator—Loc-Eze T-PMR40-MF Pressure Loc-Eze x 3/4” MHT Male 3 Staple to Hold Tubing in Place T-FTS16 Loc-Eze x 3/4” FHT Swivel Tee with Screen 3/4” (20mm) Steel Soil T-SS6-50 T-PMR15-LF ⁄ 4 ”, 25 psi 2–20 GPM Medium-fl ow Pressure Regulator— T-PMR25-MF 1 Loc-Eze 1/2” FPT Tee T-FTF16x 3/4” Loc-Eze x 1/2” Male Adapter T-FAM16 ⁄4” x 1”, 25 psi,MPT 10–32 GPM High-flow Pressure Regulator—1 Loc-Eze MHT withx Cap T-FTS16-1 Loc-Eze x 3/4” FHT Swivel Tee with Washer T-PR25-HF 3 5/8” (16mm) Plastic Locator Stake to Hold Tubing in Place T-IPS1500 T-PMR25-LF ⁄ 4”, 40 psi 2–20 GPM Medium-flow Pressure Regulator— T-PMR40-MF T-FJA16 Loc-Eze x 3/4” MHT Male Adapter T-FTV16 Loc-Eze x 1/2” Slip Adapter Tee DL2000 Pop-up Operation Indicator T-DL-MP9 Loc Eze x 3/4” FHT Hose Swivel with Screen 1 Note: 5⁄8” EHW1645 is an equivalent hose size to DL2000 Dripline. T-PR25-HF T-PMR25-MF Pressure Regulator—1 T-FJJ16 Loc-Eze 3/4” MHT with Cap Loc-Eze x 1/2” FPT Tee ⁄4” x 1”, 25 psi, 10–32 GPM High-flow 5/8”T-FTF16 (16mm) Figure-eight End Clamp T-FJQ16 Loc Eze x 3/4” FHT HosexSwivel with Washer T-PMR40-MF DL2000 Pop-up Operation Indicator T-DL-MP9 T-FAS16x 3/4” FHT Loc Swivel Eze x 3/4” FHTScreen Hose Swivel with Screen Loc-Eze Tee with Loc-Eze x to 3/4” MHT Male Adapter 3/4”T-FJA16 (20mm) Steel Soil Staple Hold Tubing in Place T-SS6-50 T-PR25-HF Loc-Eze x 3/4” FHT Tee with 5/8” (16mm) Figure-eight Clamp T-FJQ16PlasticLoc-Eze T-FAS16-1 Loc Swivel Eze x 3/4” FHTWasher Hose Swivel with Washer xStake 3/4”toMHT with Cap 5/8”T-FJJ16 (16mm) Locator Hold Tubing inEnd Place T-IPS1500
STEPLESS CLAMP
STEPLESS CLAMP THINWALL
GEAR CLAMP
PLASTIC RACHET CLAMP
x 3/4” FHT Swivel Tee with Screen T-FTS16 Note: 8” EHW1645 is an equivalent hose size to DL2000 Dripline. 1285⁄Loc-Eze T-FTS16-1 Loc-Eze x 3/4” FHT Swivel Tee with Washer
T-FAS16 T-SS6-50 T-FAS16-1 T-IPS1500 T-FTS16 Note: 5⁄8” EHW1645 is an equivalent hose size to DL2000 Dripline. T-FTS16-1
128
2
STANDARD CLAMP
THIN WALL CLAMP
Loc3/4” Eze x 3/4” FHT Hose Screen (20mm) Steel SoilSwivel Staple with to Hold Tubing in Place Loc5/8” Eze x 3/4” FHT Hose SwivelStake with to Washer (16mm) Plastic Locator Hold Tubing in Place Loc-Eze x 3/4” FHT Swivel Tee with Screen Loc-Eze x 3/4” FHT Swivel Tee with Washer
T-DL-MP9 T-FJQ16 T-SS6-50 T-IPS1500
Description
Air Vent—1⁄2” MIPT Air Release & V Flush Valve—3⁄4” FPT (Pipe Thread) Flush Valve—3⁄4” FHT (Hose Thread Pressure Regulator—3⁄4”, 15 psi 1/1 Pressure Regulator—3⁄4”, 25 psi 1/1 Pressure Regulator—3⁄4”, 25 psi 2– Pressure Regulator—3⁄4”, 40 psi 2– Pressure Regulator—11⁄4” x 1”, 25 DL2000 Pop-up Operation Indicat 5/8” (16mm) Figure-eight End Cl 3/4” (20mm) Steel Soil Staple to H 5/8” (16mm) Plastic Locator Stake
Note: 5⁄8” EHW1645 is an equivalent hose size to DL2000 Dripline.
128
¼"
OC-7.0-505R
½"
OC-21.0-706R
¾
OC-27.1-706R
1"
OC-34.6-706R
1-¼"
OC-45.5-706R
HAS16
1-½"
OC-50.0-706R
HAS24
2"
OC-62.0-908R
HAS32
OC-19.8-706R OC-31.6-706R
HAS4
PL-CLAMP250 128
HAS6
PL-CLAMP
OC-210R
OC-198R
HAS12
OC-271R
OC-256R
HAS16
OC-346R
OC-331R
The best clamp for pressurized lines • 5/16” 410 Stainless Steel Slotted Hex Head Screw • 200/300 Series Stainless Steel Band and Housing • ½” Wide Band UV stabilized materials for long life.
89
TOOLS 1. 2. 3. 4. 5. 6. 7. 8.
ELECTRICAL DIAGNOSTIC PIPE CUTTER MISC. TOOLS SHOVELS ETC PVC GLUE PVC PRIMER LANDSCAPE CLOTH SEALERS, TAPE & ACCESSORIES
ELECTRICAL DIAGNOSTIC EQUIPMENT 1
PRO48K
TECH TEST KIT
2
PRO800D
WIRE AND VALVE LOCATOR KIT
2
WIRE-R
WIRE FINDER RENTAL
3
PRO90
AUTOMATIC MULTIMETER
4
VD6 505
ADJ. VOLT SENSOR
• Tech tracker wire and valve locator tool.
2
1
• CHATTER Solenoids • Check Solenoid Continuity • ID Wire with Tone/Probe
3
RENTAL AVAILABLE
4 • Hi-Impact Resistant ABS housing • Adjustable Non-Contact sensitivity • 360° visual and beeping audio Non-Contact Voltage Detection
90
•No fuses to blow • Automatic powerdown • Full automatic and hassle free multimeter
PIPE CUTTER 2
1
1
KWIK CUT UP TO 1-¼"
T135SS
2
1-¼"REPLACE. BLADE
BT135SS
3
KWIK CUT UP TO 2"
SS200SS
4
2" REPLACEMENT BLADE
SSB200SS
5
1" PIPE CUTTER METAL
PTC-1
6
1" REPLACEMENT BLADE
PTC1-RB
7
1-¼"PIPE CUTTER METAL
R-125
8
1-¼"REPLACEMENT BLADE
R125-RB
9
½" TO 2" PIPE CUTTING TOOL
PVC2
10
MICRO TUBE CUTTER
M-CUTTER
11
1-½” PIPE CUTTER
SB5000
12
QUICK RELEASE BLADE
BL5001
13
BLU-LOCK POLY PIPE CUTTER
BL-CUT
9
10
5
6
NEW
11
3
4
7
8
12
13
Quick release blade replacement
MISC. TOOLS & ACCESSORIES 1
JOINT PLIERS 10”/12”/16”
GJP-100/120/160
2
WIRE STRIPPER
WSTRIPPER
3
36" CABLE SAW
CS4600
4
HIGH TENSION HACKSAW
HACKSAW
5
12" PVC HANDY SAW
PVCSAW
6
CLOSE QUARTER HACKSAW
ECO-HACKSAW
7
½" NIPPLE ExTRACT
26073
8
MARKING FLAGS
FLAG
9
HOSE FAUCET LOCK
HB-LOCK
10
4 WAY HOSE BIB KEY
4WKEY
11
MINI PUMP W /50’ HOSE
HPUMP-JR
12
SIPHON KING
HPUMP
13
TORO FLOW GAUGE
995-01
14
TORO PRESSURE KIT
995-51
15
PLASTIC HAMMER
41503
16
28" METER VALVE KEY
V-KEY
16
5' METER VALVE KEY
V-KEY5
16
30" GATE VALVE KEY
SK30
16
54" GATE VALVE KEY
SK54
17
TUNNEL KIT
WTK
18
CRIMPER 8”
CT108
18
CRIMPER 12”
CT112
16
1
2
6
5
9
10
4
7
8
11
12
Catalog #
Size
Selling U
48024
24” x 36” Hose
12 per bo
48036
36” x 36” Hose
12 per bo
48072
36” x 72” Hose
12 per bo
48172
60” x 72” Hose
12 per bo
14
13
17
3
15 18
91
19
BLACK CABLE TIE (ZIP TIE) 4”
Cable Tie B4.0
20
12’ MARKING WAND
K07095
21
34’ MARKING WAND
K07096
22
VARIOUS PAINT COLOURS
MPAINTxx
23
WIRE STRIPPER
WSTRIPPER
24
SPRINKLER PULL UP TOOL
SHTOOL
22
19 20
21
23
24
SHOVELS ETC Owens-Corning’s glass fiber reinforcement, is used exclusively in all Structron handles. This state-of-the-art technology produces a handle that is up to 100% stronger than other fiberglass handles.
1
SHOVEL ROUND POINT
S700
2
ROUND POINT/D-HANDLE
S700D
3
SHOVEL SQUARE POINT
S701
4
SQUARE POINT/D-HANDLE
S701D
5
5" TRENCHING SHOVEL
S702
6
4" TRENCHING SHOVEL
S703
7
5-½" DRAIN SPADE
S704
8
DRAIN SPADE/ D-HANDLE
S704D
9
GARDEN SPADE
S705
10
GARDEN SPADE/ D-HANDLE
S705D
11
4" CLEAN OUT SHOVEL
S709
12
BOW RAKE 16 TINE
BR16
13
LEVEL HEAD RAKE 16 TINE
LH16
14
ROUGH SURFACES BROOM
PB24R
15
PICK MATTOCK
PM5
16
SLEDGE HAMMER
SH8
17
¾" SPRINKLER HEAD TRIMMER
SHT2
18
½" SPRINKLER HEAD TRIMMER
SHT3
19
METAL LEAF RAKE
SR22
20
8" TAMPER
TP8
1&2
3&4
5&6
7&8
9&10
11
12
13
14
15
16
19
92
17&18
20
PVC GLUE REGULAR CLEAR CEMENT
HEAVY DUTY GREY CEMENT
RAIN-R-SHINE® CEMENT
¼ PINT
CC-012
¼ PINT
CH-012
¼ PINT
CG-012
½ PINT
CC-025
½ PINT
CH-025
½ PINT
CG-025
1 PINT
CC-050
1 PINT
CH-050
1 PINT
CG-050
1 QUART
CC-100
1 QUART
CH-100
1 QUART
CG-100
1 GALLON CC-400
1 GALLON CH-400
Regular-Bodied Clear cement for use on all schedules and classes of PVC pipe and fittings up to 4” for Sch. 40 and up to 2” for Sch. 80. Recommended application temperature 40°F to 110°F / 4°C to 43°C. This Applies To All Glue
1 GALLON CG-400
Medium-bodied grey cement for use on all schedules and classes of PVC pipe and fittings up to 6” diameter with interference fit. Very fast-setting “Hot” cement formulated for wet conditions and/or quick pressurization and fast installation.
Heavy Duty grey cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure. Thick formula fills gaps in large diameter pipe and loose fitting joints.
PVC PRIMER PURPLE PRIMER
CLEAR PRIMER
Purple-tinted aggressive primer for use on PVC and CPVC pipe and fittings. For use in areas where plumbing code calls for verification that a primer has been used.
¼ PINT
PP-012
¼ PINT
CP-012
½ PINT
PP-025
½ PINT
CP-025
1 PINT
PP-050
1 PINT
CP-050
1 QUART
PP-100
1 QUART
CP-100
1 GALLON
PP-400
1 GALLON
-
A clear aggressive primer for use on PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
93
LANDSCAPE CLOTH & ACCESSORIES
3’ x 50’ 4OZ WOVEN CLOTH
FPP1V 03050
3’ x 100’ 4OZ WOVEN CLOTH
FPP1V 03100
4’ x 100’ 4OZ WOVEN CLOTH
FPP1V0400
4’ X 250’ 4OZ WOVEN CLOTH
FPPV04250
3 FT X100 4OZ NON-WOVEN CLOTH
NW4 03100
6FT X100 4OZ NON-WOVEN CLOTH
NW4 06100
6FT X300 4OZ NON-WOVEN CLOTH
NW4 06300
7.5 FT 4OZ NON-WOVEN CLOTH
NW4 075FT
12.5FTX360 4OZ NON-WOVEN CLOTH
NW4 125360
6’x250’ PRO PLUS IV 4 PREMIUM
FPP1V-06250
8’x250’ PRO PLUS V
FPPV 08250
FRONT AND BACK
SRW Pro Plus is a double-sided or “capped” geotextile made of both woven and non-woven polypropylene fabrics, needle-punched together with plant lines every 12 inches for easy plant alignment. For best weed control, install this fabric fuzzy side facing the ground. SRW Non-Woven geotextiles are needle-punched polypropylene fabrics which are non-biodegradable. Non-Woven fabrics are produced to be high strength and dimensionally stable.
6” FABRIC STAPLES 25 PACK
S8U-25
6” FABRIC STAPLES 100 PACK
S8U-100
FRONT AND BACK
SEALERS, TAPES & ACCESSORIES EPOXY PUTTY
PUTTY4
½” DAUBER
DAUB-005
¾” DAUBER
DAUB-007
1 OZ TUBE LIQUID TEFLON
LT-010
4 OZ CAN LIQUID TEFLON
LT-040
MEGA TAPE
M-TAPE
½" TEFLON TAPE
T-TAPE
¾" TEFLON TAPE
T-TAPE-007
94
Convenient multi-purpose sealing, patching and mending compound. Withstands up to 10,000 PSI on liquids from -50° to +500°F.
VALVE BOXES NDS VALVE BOXES 6" ROUND
ECONO
10" ROUND
A-1006E
GREEN PRO BLACK PRO
A-1006BK Purple reclaimed water boxes available
ECONO
A-1010E
ECONO
A-1210E
GREEN PRO
A-1010PRO
GREEN PRO
A-1210PRO
BLACK PRO
A-1010BK
BLACK PRO
21" x 30" SQUARE
18" x 24" SQUARE
ECONO
A-1240E
GREEN PRO
A-1250PRO
GREEN PRO
A-1240Pro
BLACK PRO
A-1250BK
BLACK PRO
A-1240BK 14" x 19"
EXTENTION
A-1225
14" x 19" SQUARE
A-1210ProBK Purple reclaimed water boxes available 25.5" x 38.5"x15” SQUARE
GREEN PRO
A-1260Pro
18" x 24"
A-1240-6
RAINBIRD VALVE BOXES 10" ROUND
ECONO
A-1010ERB
14" x 19" SQUARE
ECONO
A-1210ERB
19" x 26" SQUARE
ECONO
A-1240ERB
95
ARTIFICIAL TURF All turf is special order with 2-3 days shipping *** Comes in 15’ widths, per foot *** $60 freight charge for any amount.
TURF RYMAR DURABLADE 65 (S SHAPED) RYMAR DURABLADE 95 (S SHAPED) RYMAR EVERBLADE 50 (FLAT BLADE) RYMAR EVERBLADE 80 (FLAT BLADE) RYMAR TRI-BLEND 50 (W,V,FLAT SHAPED) RYMAR TRI-BLEND 70 (W,V,FLAT SHAPED) TROPICAL STORM 40 (S BLADE) ULTRABLADE W50 (W BLADE) RYMAR DURAPET (S SHAPED) RYMAR PRO PUTT RYMAR BERMUDA PRO PUTT
TROPICAL
96
ULTRABLADE
DURAPET
ATR-DURA65 ATR-DURA95 ATR-EVER50 ATR-EVER80 ATR-TRI50 ATR-TRI70 ATR-Storm40 ATR-W50 ATR-DURAPET ATR-ProPutt ATR-BermPutt
PRO PUTT
65 DURABLADE 95
50 EVERBLADE 80
50 TRI-BLEND 70
BERMUDA
INFILL RYMAR ZEOLITE 55 - 55LBS BAGS SILICA SAND INFILL 50-100 (Putting Green) ENVIROFILL 12/20 50lb bag
ATR-Zeolite55 ATR-Silica ATR-Envirofill
Benefits of Envirofill: • • • •
Looks better (green) prevents bacteria growth (good for pets) stays cooler Highest quality (FIFA approved)
Use Charts below to determine how much infill you need
Turf Type
Pile height
Amount of Zeolite
Amount of Envirofill
Amount of Silica Sand
Durablade 65
1.5"
1.5lbs per sqft
2.5lbs per sqft
Durablade 95
2"
2lbs per sqft
4 lbs per sqft
Everblade 50
1.5"
1.5lbs per sqft
2.5lbs per sqft
Everblade 80
1.95"
1.95lbs per sqft
4 lbs per sqft
Triblend 70
1.8"
1.8lbs per sqft
3.5lbs per sqft
Triblend 50
1.5"
1.5lbs per sqft
2.5lbs per sqft
EV3D 50
1.5"
1.5lbs per sqft
2.5lbs per sqft
EV3D 80
1.95"
1.95lbs per sqft
4 lbs per sqft
Tropical 40
1.4"
1.4lbs per sqft
2.5lbs per sqft
Ultrablade 50
1.5"
1.5lbs per sqft
2.5lbs per sqft
Durapet
1"
1lbs per sqft
1.5lbs per sqft
Pro Putt
0.71"
1-1.5lbs
Bermuda Pro
0.94"
2 - 3lbs
97
SEAMS SEAMING TAPE 328ft roll SEAMING TAPE per ft
ATR-SeamTape ATR-SeamTape-Ft
NAILS 6” Spiral Nails box of 250 6” Spiral Nails box of 500 10” SPIRAL NAILS Bundle of 20
ATR-Nails6-250 ATR-Nails6 ATR-Nails-20
10” SPIRAL NAILS Box 200ea
ATR-Nails
GLUE 29OZ TUBES OF GLUE (MAPEI) (10-15LNFT) 1 GALLON PAIL OF GLUE (XGS)(55-65LNFT)
ATR-Glue29 oz ATR-Glue 1gal
URICIDE URICIDE - 32oz
Use Uricide if you have pets and are using Zeolite (Zeolite does not prevent growth of bacteria like Envirofill does)
ATR-Uricide
FABRIC TO USE:
Landscape cloth (Page 92)
Ask us about cups and flags for your putting green
98
AGRICULTURE AQUA-TRAXX PREMIUM DRIP TAPE Performance_Brochure_06
9/5/06
5:47 PM
Performance_Brochure_06
Page 15
9/5/06
5:47 PM
Page 5
- Extra-large cross-sectional area helps prevent clogging.
Aqua-Traxx Aqua-Traxx Aqua-Traxx Aqua-Traxx PERFORMANCE CHARTS - Advanced flow path design accurate delivery of water from every emitter. PERFORMANCE CHARTSensures PERFORMANCE CHARTS ®
®
5/8"
LENGTH OF RUN IN FEET .45 gpm PER 100 FEET @ 8 psi
0% SLOPE
8” Spacing 12” Spacing
5/8"
EA5XX0834 OF RUN IN FEET EA5XX1634LENGTH LENGTH OF RUN IN FEET .34 gpm PER PER 100 100 FEETFEET @ 8@psi8 psi .34 gpm
EA5XX1222
0% SLOPE 0% SLOPE
INLET PRESSURE
EU
6
8
10
12
14
EU EU
90 85 80
534 673 784
538 678 790
541 682 794
544 685 798
546 688 801
90 90 85 85 80 80
1% DOWN
Max. 15 psi
5/8" 5/8"
Emitter Flow Rate 0.13 GPHGPH @@ 8 psi Emitter Flow Rate 0.27 8 psi
Emitter Flow Rate 0.27 GPH @ 8 psi
EA5XX1245
8
10
12
14
EU EU
90 85 80
687 853 984
680 844 978
671 834 969
662 824 959
654 814 950
90 90 85 85 80 80
EU
6
8
10
12
14
EU EU
90 85 80
647 842 975
686 863 995
698 869 1001
699 868 1003
697 865 1000
90 90 85 85 80 80
2% DOWN
90 85 80
per FT. 2,000’
10
12
6
8
10
12
14
EU EU
90
260 375 455
309 431 515
345 470 557
372 499 589
394 522 614
90 90 85 85 80 80
1% UP
SPIN-C80
VALVE
SPIN-VEU
4
SPIN x ¼" BARB VALVE
90 SPIN-V250
5
SPIN x ¼" BARB ADAPT. SPIN-250 80
6
SPIN x ¾" FHT SWIVEL
SPIN-FHT
7
SPIN x ¾" MPT
SPIN-MPT
8
TAPE END CLOSURE
TEC
85
857 1079 1258
12" SPACING 10mm 1% DOWN 14 14
EU
6
8
827 827 827 827 818 817 809 808 800800 10291029 10251025 10171016 10051005 995995 11871187 11851184 11771177 11681168 11591159
90 85 80
1079 1362 1569
1105 1375 1587
6
6
8
8
10 10
12 12
1
2
6
8
10
12
14
149 234 298
192 293 365
229 340 417
261 378 459
288 409 493
5
2% DOWN 14 14
EU
6
8
702 703 803 803 831 831 841 841 843843 988 988 10261025 10431043 10471047 10481048 11511151 11851185 12011201 12071207 12091209
90 85 80
207 1226 1471
936 1320 1538
6
6
8
8
10 10
12 12
3% DOWN
90 90 85 85 80 80
136 136 191 192 759 760 809 809 832832 877 877 973 972 10141013 10371036 10491049 10831083 11431144 11771177 11971197 12091209
1% UP 1% UP
2% UP
3
851 1072 1249
AQUATRAX-12-2000
EU
SPIN LOCK FITTINGS COUPLING
90 85 80
AQUATRAX-12-7500 14 AQUATRAX-8-7500 10 EU EU 6 6 8 8 10 12 12 14 14 EU 702 877 1010
2
8
641 641 646 645 649 649 653 652 655655 807 807 814 813 818 817 822 821 826825 941 941 948 948 953 953 958 957 961961
AQUATRAX-8-2000
693 872 1005
SPIN-T85
6
AQUATRAX-12
672 860 993
6
90 90 85 85 80 80
90 85 80
6
8
133 283 1323
181 1171 1447
1% UP 14 14
EU
6
8
273 275 333 335 379 380 415 415 443443 405 405 475 476 527 527 565 565 595596 497 497 573 575 629 629 670 671 703703
90 85 80
290 445 557
365 541 664
6
6
8
8
10 10
12 12
3
2% UP 2% UP EU EU
INLET P
EU
3% DOWN 3% DOWN
6 7,500’ 8
LENGTH OF .22 gpm PER 1
0% SLOPE 12 12
AQUATRAX-8
617 837 972
TEE
10 10
2% DOWN 2% DOWN
140 785 933
1
8
PERFOR
14 14
8
1% DOWN 1% DOWN 6
EU
6
®
Emitter Flow Rate
INLET PRESSURE INLET PRESSURE 6
8" SPACING 10mm
EU
3% DOWN
®
6
6
4
8
8
10 10
12 12
14 14
151 152 196 197 238 239 275 276 307308 240 241 306 307 261 363 408 409 447448 309 309 386 387 449 451 501 503 544544
7
8
2% UP EU
6
8
90 85 80
153 247 320
201 321 412
TRI-POD ASSEMBLIES TRI-012 Tripod assembly 1000F
1 1/4” Sprinkler Stand, Male Threaded 1 1/4” Steel Tripod W/ Impact and Cam-Lock Fitting Wheeled Sprinkler Cart - 1” w/Slime Funny Sprinkler
99
NELSON BIG GUN
SR75
SR100
SR75 18° Big Gun
SR100 18° Big Gun
Flow
30-100 GPM
50-150 gpm
Pressure
25-60 PSI
40-80 PSI
Radius
70-90 FT
90-120 FT
The Big Gun® offers solutions for diverse applications across a wide range of pressures and flow rates. Multiple trajectories, connection styles, and custom options allow you to configure the perfect solution for any application. The first Big Gun® sprinklers were placed on the ends of center pivots over 45 years ago as a cost effective solution to put pivot corners into production. Today, the Big Gun® remains the “end gun” standard — trusted for year after year operation.
BIG GUN NOZZLES
100
101
USEFUL INFORMATION The information provided in this section is practical rule of thumb information. The information provided should be used for project planning or scope purposes. Detailed calculations are recommended for all projects.
PIPE FLOW
Maximum Flow, gpm Size
Sch 40
Class 200
Poly Prime
½” ¾”
5
5
4
7
10
8
8
12
16
12
13
1”
Blu-Lock
Max Runs of 1gph 12” spacing 1/2 “ drip = 260ft @ 30psi
How many Shrubblers per zone? Size of Supply Line (Poly)
½” ¾” 1”
Number of Shrubblers (10gph) 24 48 72
Water Features Useful Calculations Gentle stream slope for waterway 1” per 10 ft Rules of Thumb 1500 GPH for each 1ft of spillway 3000 GPH for each 1ft of spillway (Commercial) = more sound Every 10 ft of pipe = add 1 ft of head Head = Height = Pressure 1” Elevation = .41 PSI 2.3 ft of elevation = 1 psi
Thickness of Water: ¼” X 1” = 100 gph
Pond Circulation:
Circulate entire volume of pond once per hour
Example:
Pond Volume Calculation:
1. 12 x 20 sqft x 80% = 192 sqft 2. 192 x 1.5 = 288 cubic ft 3. 7.48 gallons per cubic ft (US
1. L x W x 80% (not square) 2. Area x Average Depth (MaxDepth/2)= cubic ft 3. Cubic ft x 7.48 gal/cu ft = Pond Volume
Gallons) 288 cubic feet x 7.48 gal = 2154.24 Gallons Thrust blocks used on pipe 2½” and bigger
Pond Liner Sizing Width + 2’ Overlap = Wo Length + 2’ Overlap = Lo Depth x 2 + 2’ Overlap = Do Wo + Do = Liner Width Lo + Do = Liner Length
102
Pond Head Height
Water Discharge above surface or water + pipe friction Loss = Head Height Pipe Friction Loss = 1 ft head for every 10ft pipe (rule of thumb)
GLOSSARY OF TERMS Abbreviation Definition & Meaning Air Vacuum Relief Valve AVRV Corrected or adjusted irrigation design As-Built depicting the actual install
AVB BV BF Class Pipe CV DCVA Drip
Air Vacuum Breaker Ball Valve Backflow Preventer Zone line PVC pipe rated as Class, 160, 200 315 Check Valve Double Check Valve Assembly (Backflow) Devices providing a slow application of water normally measured in gallons per hour (gph)
DU
Distribution Uniformity - the uniformity of the distribution of water of a given area
ET FHT FIPT Fps
Evapotranspiration Rate Female hose thread Female iron Pipe Thread
AbbreviaDefinition & Meaning tion Pounds Per Square Inch PSI Reduced Pressure Valve Assembly RPVA (High risk Backflow)
Schedule Watering shedule usually entered in a controller
SDR Sleeve Swing Joint
Standard Dimension Ratio
Thrust Block
Concrete or blocking next to a fitting where there is a change in dicrection of water flow
Water Window
Permitted time period for watering
Zone
Group of watering devices associated with a single valve
Pipe used to proect other pipe A flexible joint (composed of a series of threaded risers and 3 elbow connections) or pipe connecting a sprinkler head to a pipe.
Feet per Second
Friction Losss Loss of Pressure over length of pipe
GV Globe Valve gph gpm Head
Gate Valve Valve that has either side or bottom inlet US gallons per hour US gallons per minute Height in feet or psi from supply to delivery point
ID Main
Inside Diameter
Mesh
Number of openings per linear inch on a filter
MHT Micron MIPT Non-Potable Water Nozzle Tree OD P.E. POC PRV
Main line for an irrigation system normally under constant Pressure
Male hose thread Size of opening in a filter Male Iron Pipe Thread Water that is not drinkable Series of nozzles that come with a rotor Outside Diameter Polyethylene Pipe Point of Connection Pressure Reducing Valve
103
WES-TECH irrigation.ca
“Industry Experts with the Best Selection!”
625 Alpha Street Victoria, BC V8Z 1B5
irrigation.ca 250-361-1573 orders@irrigation.ca
893 Van Isle Way Langford, BC V9B 5R8