2021 Version 1
WES-TECH IRRIGATION
Irrigation Catalogue Pipe, Fittings, Parts, Pumps, Electrical, Aquatics, Tools and Accessories
625 Alpha Street Victoria, BC V8Z 1B5
shop.irrigation.ca
893 Van Isle Way Langford, BC V9B 5R8
CONTENTS FITTINGS..........................................................................................6 SCH 40 FITTINGS............................................................... 7 SCH 40 FITTINGS............................................................... 8 SCH 80 FITTINGS.............................................................. 12 INSERT FITTINGS.............................................................. 13 BLU-LOCK FITTINGS......................................................... 14 PRE-MADE SWING JOINTS............................................... 15 TOOLS AND MISC............................................................. 15 PVC-LOCK FITTINGS......................................................... 16 PRE-MADE SWING JOINTS............................................... 17 MARLEX FITTINGS............................................................. 17 SWING PIPE FITTINGS...................................................... 17 RISERS/NIPPLES................................................................ 18 BRASS FITTINGS................................................................ 18 PVC DRAINAGE FITTINGS................................................. 19 EZFLOW DRAINAGE.......................................................... 20 HYDRO-RAIN MANIFOLD FITTINGS................................ 22 DURA MANIFOLD FITTINGS............................................. 22 PHILMAC COMPRESSION FITTING.................................. 23 CEPEX FITTINGS................................................................ 23 PUSH FIT FITTINGS........................................................... 24 ½” SMART-LOC FITTINGS................................................. 24 GARDEN HOSE FITTINGS................................................. 25 GARDEN HOSE & ACCESSORIES..................................... 26 AQUA-TRAXX PREMIUM DRIP TAPE................................ 26 TECHLINE EZ (12MM DRIPLINE)...................................... 27 3/8” MICRO FITTINGS....................................................... 27 DRIP-LOCK FITTINGS........................................................ 28 DAWN QUICK REPAIR FITTINGS...................................... 28 PVC COMPRESSION FITTINGS......................................... 29 VALVES............................................................................... 29 PVC BALL VALVES............................................................. 30 MISCELLANEOUS VALVES................................................ 30 QUICK COUPLER............................................................... 31 CAM-LOCK FITTINGS........................................................ 31
BACKFLOW PREVENTION.............................................................32 VACUUM BREAKER & DUAL CHECK VALVES.................. 32 PVC CHECK VALVES.......................................................... 33 DUAL CHECK VALVE ASSEMBLY...................................... 33
PRESSURE REDUCER.....................................................................34 REDUCED PRESSURE ASSEMBLY.................................... 34 BRASS STATIC PRESSURE REDUCER............................... 34 SENNINGER PRESSURE REGULATOR............................ 35
2
FILTRATION....................................................................................36 DISK FILTER....................................................................... 36 SCREEN FILTER................................................................. 37 DRINKING WATER FILTRATION...................................... 37 PUMPS............................................................................... 38
MICRO IRRIGATION.......................................................................39 DRIP EMITTER................................................................... 39 FLAG DRIPPER................................................................... 40 MINI BUBBLER.................................................................. 40 VARI-JET AND VARI-MIST.................................................. 40 SHRUBBLER....................................................................... 41 WING JETS......................................................................... 41 MINI SPRINKLER............................................................... 42 SPECTRUM........................................................................ 42 ROTOR MAX...................................................................... 43 MINI COMPACT................................................................. 43 DOWN SPRAY.................................................................... 43 MICRO SPRAY JETS .......................................................... 44 EXL SERIES FOGGER......................................................... 44 GREEN HOUSE FOGGER & MISTER................................. 45 MINI COMPACT ACCESSORIES........................................ 45 RISER ADAPTER................................................................. 46 CUATRO-FLO BUBBLER................................................... 46 ORBIT BUBBLER................................................................ 47 BUBBLER ACCESSORIES................................................... 47 STAKES AND RIGID RISER................................................ 48 ⅛” AND ¼” MICRO FITTINGS........................................... 48 RAINBIRD SELF PIERCING FITTINGS............................... 48 TUBING FASTENER........................................................... 49 PUNCH TOOLS.................................................................. 49
ROTOR SPRAYS..............................................................................50 IMPACT ROTORS............................................................... 50 RAINBIRD 3500 SERIES.................................................... 50 RAINBIRD 5000/5000 PLUS SERIES................................ 51 RAINBIRD FALCON® 6504 SERIES.................................. 51 RAINBIRD 8005 SERIES.................................................... 51 WES-TECH MINI PRO GEAR ROTOR................................ 52 WES-TECH SUPER PRO..................................................... 52 RPS SELECT....................................................................... 52 TORO T5 GEAR ROTOR.................................................... 53 TORO T7 GEAR ROTOR.................................................... 53 TORO 640 GEAR ROTOR.................................................. 54 HUNTER PGP ULTRA ROTORS......................................... 54 HUNTER PGJ, I25, I40 & PGP CLASSIC............................ 55
3
POP UP SPRAYS.............................................................................56 HUNTER SPRAY HEADS............................................................... 56 HYDRO RAIN HRS100 & 200 SPRAY HEAD..................... 56 RAIN BIRD 1800™ SERIES SPRAY HEAD......................... 57 RAIN BIRD 1800™ ACCESSORIES.................................... 57 TORO 570 CLASSIC SPRAY HEAD.................................... 57 TORO 570 X-FLOW WITH CHECK VALVE........................ 58 TORO 570 X-FLOW PR + CHECK...................................... 58 IRRITROL I-PRO SERIES SPRAY HEADS........................... 58 R-VAN SERIES ROTARY NOZZLES.................................... 59 RAIN BIRD 1800™ SERIES NOZZLES............................... 59 TORO PRESSURE COMPENSATING NOZZLES............... 61 TORO TVAN VARIABLE ARC NOZZLES............................ 62 IRRITROL I-PRO 9’ STRIP NOZZLES................................. 62 TORO PRECISION™ STREAM NOZZLES.......................... 62 PRECISION™ SERIES SPRAY NOZZLES............................ 63 PRECISION™ SERIES PERFORMANCE DATA................... 64 MP ROTATOR STREAM ROTOR....................................... 65
CONTROLLERS...............................................................................67 HUNTER WIFI CONTROLLER........................................... 67 HYDRO-RAIN WIFI CONTROLLER.................................... 68 RAIN BIRD ESP MODULAR CONTROLLER...................... 68 IRRITROL TOTAL CONTROL CONTROLLER.................... 69 TORO EVOLUTION™ SERIES CONTROLLER................... 69 IRRITROL KD2 CONTROLLER........................................... 70 HYDRO-RAIN CONTROLLER............................................ 70 RAIN BIRD ESP-TM2 CONTROLLER................................. 71 RAIN BIRD ESP-9V ............................................................ 71 TORO DDCWP™ BATTERY CONTROLLER....................... 72 HYDRO-RAIN BATTERY TIMER......................................... 72 HOSE TIMER & ACCESSORIES........................................ 73 RAIN BIRD TBOS™ BATTERY CONTROLLER................... 73 CLIMATE LOGIC™ WEATHER-SENSING SYSTEM............ 74 TORO RAIN SENSORS....................................................... 74 REMOTES........................................................................... 74 IRRITROL RAIN SENSORS................................................. 74 PRECISION SOIL SENSOR................................................. 75
ELECTRIC VALVES..........................................................................76 IRRITROL 2400 SERIES ELEC. VALVE............................... 76 IRRITROL 205 SERIES ELEC. VALVE................................. 76 IRRITROL 2500 SERIES ELEC. VALVE............................... 76 IRRITROL ULTRA-FLOW ELEC. VALVE............................. 77 IRRITROL 200 COMMERCIAL VALVE............................... 77 IRRITROL CENTURY COMMERCIAL VALVE..................... 77 TORO EZ-FLOW VALVE WITH FC..................................... 78 TORO P220 SERIES COMMERCIAL VALVE...................... 78 HYDRO-RAIN ELECTRIC VALVE........................................ 78
4
HRZ100 ALL IN ONE VALVE FILTER PRV......................... 79 RAIN BIRD DV SERIES COMMERCIAL VALVE.................. 79 RAIN BIRD PGA COMMERCIAL VALVE............................ 79 EZYVALVE™........................................................................ 80 VALVE PRESSURE REGULATOR....................................... 80 VALVE SOLENOID............................................................ 80 FLOW SENSOR................................................................. 81
WIRE................................................................................................82 MULTI-STRAND WIRE...................................................... 82 LIGHTING WIRE................................................................ 82 WIRE CONNECTOR.......................................................... 82 WIRING DISTANCES IN FT................................................ 83
PIPE.................................................................................................84 PVC PIPE........................................................................... 84 POLY/MUNI PIPE............................................................. 84 FLEX PIPE........................................................................... 85 PEX PIPE............................................................................. 85 BLU-LOCK PIPE................................................................. 85 DRIP IN® PC BROWN EMITTER LINE............................. 86 ¼” EMITTER LINE.............................................................. 86 MICRO TUBING................................................................ 86 AQUA-TRAXX PREMIUM DRIP TAPE................................ 87 DL2000® SERIES PC EMITTER LINE................................ 87 CLAMPS............................................................................. 87
TOOLS.............................................................................................88 ELECTRICAL DIAGNOSTIC EQUIPMENT......................... 88 PIPE CUTTER.................................................................... 89 MISC. TOOLS & ACCESSORIES........................................ 89 SHOVELS ETC.................................................................... 90 PVC GLUE......................................................................... 91 PVC PRIMER..................................................................... 91 LANDSCAPE CLOTH & ACCESSORIES............................. 92 SEALERS, TAPES & ACCESSORIES.................................... 92
VALVE BOXES.................................................................................93 NDS PRO SERIES VALVE BOXES...................................... 93 RAINBIRD VALVE BOXES.................................................. 93
AGRICULTURE................................................................................94 MINI HOSE REELS............................................................. 94 WATER TANKS................................................................... 94 TRI-POD ASSEMBLIES....................................................... 95 PRO-LOCK FITTINGS......................................................... 95 AQUA-TRAXX PREMIUM DRIP TAPE................................ 95
5
FITTINGS 1. SCHED 40 (WHITE) 2. SCHED 80 (GREY) 3. SWING PIPE FITTINGS 4. INSERT 5. BLU-LOCK 6. PVC LOCK 7. PRE-MADE SWING JOINTS 8. MARLEX 9. DRAINAGE 10. CHANNEL DRAINS 11. BRASS 12. BULKHEAD & RUBBER 13. DURA MANIFOLD 14. HYDRORAIN MANIFOLD 15. PHILMAC 16. PUSH FIT 17. ½” SMART LOCK 18. GARDEN HOSE FITTING 19. AQUATRAXX DRIP TAPE 20. TECHLINE EZ 21. 3/8” MICRO 22. DRIP-LOCK 23. REPAIR FITTINGS 24. PVC COMPRESSION 25. VALVES 26. QUICK COUPLER 27. CAMLOCK
6
LEGEND FIPT Female Inside Pipe Thread MIPT Male Outside Pipe Thread SPIG Spigot and Slip-Fit Inside SLIP Fittings Slip Over PVC Pipe RED Reducing Fittings
SCH 40 FITTINGS SLIP X SLIP X SLIP
SLIP X SLIP X FIPT
½”
401-005
¾”
401-007
1”
401-010
1¼”
401-012
1½”
401-015
2”
401-020
2½”
401-025
3”
401-030
4”
401-040
¾” x ½”
401-101
1” x ½”
401-130
1” x ¾”
401-131
1-¼” x ½”
401-166
1-¼” x ¾”
401-167
1-¼” x 1”
401-168
1-½” x ½”
401-209
1-½” x ¾”
401-210
1-½” x 1”
401-211
1-½” x 1-¼”
401-212
2” x ½”
401-247
2” x ¾”
FIPT X FIPT X FIPT
SLIP X SLIP
½”
402-005
½”
405-005
½”
406-005
¾”
402-007
¾”
405-007
¾”
406-007
1”
402-010
1”
405-010
1”
406-010
1¼”
402-012
1¼”
405-012
1-¼”
406-012
1½”
402-015
1½”
405-015
1-½”
406-015
2”
402-020
2”
405-020
2”
406-020
¾” x ½”
402-101
2-½”
406-025
1” x ½”
402-130
3”
406-030
1” x ¾”
402-131
4”
406-040
1-¼” x ½”
402-166
¾”x½”
406-101
1-¼” x ¾”
402-167
1” x ½”
406-130
1-¼” x 1”
402-168
1” x ¾”
406-131
1-½” x ½”
402-209
1-½” x ¾”
402-210
1-½” x 1”
402-211
1-½” x 1-¼” 402-212 2” x ½”
402-247
2” x ¾”
402-248
2” x 1”
402-249
2” x 1-¼”
402-250
401-248
2” x 1-½”
402-251
2” x 1”
401-249
2 ½” x 1”
402-289
2” x 1-¼”
401-250
2” x1½”
401-251
SLIP X FIPT
FIPT X FIPT
SPIG X SLIP
MIPT X SLIP
½”
407-005
½”
408-005
½”
409-005
½”
410-005
¾”
407-007
¾”
408-007
¾”
409-007
¾”
410-007
1”
407-010
1”
408-010
1”
409-010
1”
410-010
1¼”
407-012
1¼”
408-012
1¼”
409-012
1¼”
410-012
1½”
407-015
1½”
408-015
1½”
409-015
1½”
410-015
2”
407-020
2”
408-020
2”
409-020
2”
410-020
¾” x ½”
407-101
1” x ½”
407-130
1” x ¾”
407-131
7
SCH 40 FITTINGS MIPT FIPT
SLIP X SLIP X SLIP X
SLIP X SLIP X FIPT
SLIP X SLIP 45°
½”
412-005
½”
413-005
½”
414-005
¾”
412-007
¾”
413-007
¾”x½”
414-101
1”
412-010
1”
413-010
1” x ½”
414-130
1-¼”
412-012
1-½”
413-015
1-½”
412-015
2”
413-020
2”
412-020
¾”x½”
413-101
1” x ½”
413-130
SLIP X SPIG 45°
SLIP CROSS
SLIP X SLIP 22½°
½”
417-005
¾”
417-007
1”
417-010
1¼”
417-012
1½”
417-015
2”
417-020
2½”
417-025
3”
417-030
4”
417-040
6”
417-060
SLIP
COUPLING
1”
427-010
1½”
465-015
½”
420-005
½”
429-005
1¼”
427-012
2”
465-020
¾”
420-007
¾”
429-007
1½”
427-015
1”
420-010
1”
429-010
2”
427-020
1¼”
420-012
1¼”
429-012
1½”
420-015
1½”
429-015
2”
420-020
2”
429-020
2½”
429-025
3”
429-030
4”
429-040
8
FIPT X FIPT
SPIG X MIPT
COUPLING
SLIP X FIPT RED
SLIP X FIPT
COUPLING
COUPLING
½”
430-005
½”
433-005
½”
435-005
¾”
430-007
¾”
433-007
¾”
435-007
1”
430-010
1”
433-010
1”
435-010
1¼”
430-012
1¼”
433-012
1¼”
435-012
1½”
430-015
1½”
433-015
1½”
435-015
¾” x ½”
430-101
2”
433-020
2”
435-020
1” x ½”
430-131
2½”
435-025
1¼” x 1”
430-168
3”
435-030
4”
435-040
SLIP CAP
SLIP X MIPT
½” X ¼” ½” X ¾” ¾” X ½” ¾” X 1” 1” X ½” 1” X ¾” 1” x 1 ¼”
435-072 435-074 435-101 435-102 435-130 435-131 435-132
MIPT X SLIP RED
COUPLING ½”
447-005
½”
436-005
¾”
447-007
¾”
436-007
1”
447-010
1”
436-010
1-¼”
447-012
1¼”
436-012
1-½”
447-015
1½”
436-015
2”
447-020
2”
436-020
2-½”
447-025
2½”
436-025
3”
447-030
3”
436-030
4”
447-040
4”
436-040
½” x ¾” ½” x 1” ¾” x ½” ¾” x 1” 1” x ¾” 1” x 1-¼” 1-¼” x 1” 1-¼” x 1-½” 1-½” x 1-¼” 1-½” x 2”
436-074 436-075 436-101 436-102 436-131 436-132 436-168 436-169 436-212 436-213
9
SPIG X SLIP RED ¾” x ½” 1” x ½” 1” x ¾” 1-¼” x ½” 1-¼” x ¾” 1-¼” x 1” 1-½” x ½” 1-½” x ¾” 1-½” x 1” 1-½” x 1-¼” 2” x ½” 2” x ¾” 2” x 1” 2” x 1-¼” 2” x 1-½” 2-½” x ½” 2-½” x ¾” 2-½” x 1” 2-½” x 1-¼” 2-½” x 1-½” 2-½” x 2” 3” x ½” 3” x ¾” 3” x 1” 3” x 1-½” 3” x 2” 3” X 2 ½” 4” x 2” 4” x 2 ½” 4” x 3”
10
SPIG X FIPT RED
SPIG X FIPT RED 437-101 437-130 437-131 437-166 437-167 437-168 437-209 437-210 437-211 437-212 437-247 437-248 437-249 437-250 437-251 437-287 437-288 437-289 437-290° 437-291 437-292 437-333 437-334 437-335 437-337 437-338 437-339 437-420 437-421 437-422
½” x ½” ½” x ½” ½” x ½” ¾” x ¼” ¾” x 3/8” ¾” x ½” 1” x ½” 1” x ¾” 1-¼” x ½”
438-071 438-072 438-073 438-098 438-099 438-101 438-130 438-131 438-166
FIPT CAP
½”
448-005
¾”
448-007
1”
448-010
1-¼”
448-012
1-½”
448-015
2”
448-020
2-½”
448-025
3”
448-030
4”
448-040
1-¼” x ½” 1-¼” x ¾” 1-¼” x 1” 1-½” x ½” 1-½” x ¾” 1-½” x 1” 1-½” x 1-¼” 2” x ½” 2” x ¾” 2” x 1” 2” x 1-¼” 2” x 1-½” 2-½” x ½” 2-½” x ¾” 2-½” x 1” 2-½” x 1-¼” 2-½” x 1-½” 2-½” x 2” 3” x ½” 3” x ¾” 3” x 1” 3” x 1-½” 3” x 2” 4” x 2”
MIPT X FIPT RED 438-166 438-167 438-168 438-209 438-210 438-211 438-212 438-247 438-248 438-249 438-250 438-251 438-287 438-288 438-289 438-290° 438-291 438-292 438-333 438-334 438-335 438-337 438-338 438-421
½” x ¼”
439-071
½” x ⅛”
439-072
½” x ⅜”
439-073
¾” x ¼”
439-098
¾” x ⅜”
439-099
¾” x ½”
439-101
1” x ½”
439-130
1” x ¾”
439-131
1-¼” x ½”
439-166
1-¼” x ¾”
439-167
1-¼” x 1”
439-168
1-½” x ½”
439-209
1-½” x ¾”
439-210
1-½” x 1”
439-211
1-½”x1-¼”
439-212
2” x 1-½”
439-251
SLIP PLUG
SLIP UNIONS
MIPT PLUG
½”
449-005
¼”
450-002
½”
457-005
¾”
449-007
½”
450-005
¾”
457-007
1”
449-010
¾”
450-007
1”
457-010
1-¼”
449-012
1”
450-010
1-¼”
457-012
1-½”
449-015
1-¼”
450-012
1-½”
457-015
2”
449-020
1-½”
450-015
2”
457-020
2-½”
449-025
2”
450-020
3”
457-030
3”
449-030
2-½”
450-025
4”
449-040
FIPT UNIONS
SNAP TEE
½”
458-005
½”
463-005
¾”
458-007
¾”
463-007
1”
458-010
1”
463-010
1-¼”
458-012
1-¼”
463-012
1-½”
458-015
1-½”
463-015
2”
458-020
2”
463-020
3”
458-030
11
SCH 80 FITTINGS FIPT X FIPT X FIPT TEE
FIPT X FIPT 90° ELBOW
FIPT X MIPT 90° ELBOW
FIPT X FIPT 45° ELBOW
ALL FIPT COUPLING
FIPT CAP
½”
805-005
808-005
-
819-005
830-005
836-005
848-005
¾”
805-007
808-007
-
819-007
830-007
836-007
848-007
1”
805-010
808-010
812-010
819-010
830-010
836-010
848-010
1-¼”
805-012
808-012
812-012
819-012
830-012
836-012
848-012
1-½”
805-015
808-015
812-015
819-015
830-015
836-015
848-015
2”
805-020
808-020
-
819-020
830-020
836-020
848-020
MIPT X FIPT RED
REDUCING
TEE SLIP X SLIP
NIPPLE
2”
¾” x ½”
839-101
¾” x ½”
883-101
1” x ¾”
839-131
1” x ½”
884-130
1-¼” x 1”
839-168
1” x ¾”
884-131
1-½” x 1”
839-211
1-¼” x 1”
885-168
1-½” x 1-¼”
839-212
2” x 1-¼”
839-250
2” x 1-½”
839-251
801-020
90 DEGREE ELLBOW SLIP X SLIP 2”
806-020
BUSHING SLIP X FIPT 2” x 1 ½”
UNION FIPT X FIPT
12
MIPT X SLIP ADAPTER
¾”
898-007
1”
898-010
1-¼”
898-012
1-½”
898-015
2”
898-020
838-251
INSERT FITTINGS INSERT TEE
INSERT X FIPT TEE
INSERT X MIPT TEE
INSERT ELBOW
INSERT X FIPT ELBOW
INSERT X MIPT ELBOW
INSERT CROSS
½”
1401-005
1402-005
1403-005
1406-005
1407-005
1413-005
1420-005
¾”
1401-007
1402-007
1403-007
1406-007
1407-007
1413-007
1420-007
1”
1401-010
1402-010
1403-010
1406-010
1407-010
1413-010
1420-010
1-¼”
1401-012
1402-012
1403-012
1406-012
1407-012
1413-012
1420-012
1-½”
1401-015
1402-015
1403-015
1406-015
1407-015
1413-015
1420-015
2”
1401-020
1402-020
1403-020
1406-020
1407-020
1413-020
1420-020
INSERT COUPLING
INSERT x SLIP
INSERT x FIPT
INSERT x MIPT
INSERT PLUG
½”
1429-005
1432-005
1435-005
1436-005
1449-005
¾”
1429-007
1432-007
1435-007
1436-007
1449-007
1”
1429-010
1432-010
1435-010
1436-010
1449-010
1-¼”
1429-012
1432-012
1435-012
1436-012
1449-012
1-½”
1429-015
1432-015
1435-015
1436-015
1449-015
2”
1429-020
1432-020
1435-020
1436-020
1449-020
INSERT RED. TEE
INSERT x FIPT RED. TEE
INSERT x FIPT RED. ELBOW
For use with... POLY PIPE Blu-Lock Pipe Drip Line
* May require clamps
INSERT x INSERT x FIPT CORFIPT SIDE NER ELBOW OUTLET TEE
INSERT REDUCING COUPLING
INSERT x MIPT RED. ADAPTER
½” x ¾”
1401-074
-
-
-
-
-
1436-074
½” x 1”
-
-
-
-
-
1436-075
¾” x ½”
1401-101
1402-101
1407-101
1414-101
1416-101
1429-101
¾” x 1”
-
-
-
-
-
-
1436-102
1” x ½”
1401-130
1402-130
1407-130
-
-
1429-130
1436-130
1” x ¾”
1401-131
1402-131
1407-131
-
-
1429-131
1436-131
1-¼” x ½”
-
1402-166
-
-
-
-
1-¼” x ¾”
-
-
-
-
-
1429-167
1-¼” x 1”
-
1402-168
-
-
-
1429-168
-
1-½” x ½”
-
1402-209
-
-
-
-
-
1-½” x ¾” 1-½” x 1”
1401-210
1402-210
-
-
-
-
-
1402-211
-
-
-
1429-210 1429-211
1-½” x 1-¼” -
-
-
-
-
1429-212
-
2” x ½”
-
1402-247
-
-
-
-
-
2” x 1-½”
-
-
-
-
-
1429-251
-
1436-101
-
-
13
BLU-LOCK FITTINGS Blu-Lock® 3X takes installation speed and ease to new heights. The addition of three key new features makes push-fit installation easier and more flexible. • Easier—insertion force has been reduced by half to make installation even faster. • Compatible—works with all 80# and 100# SIDR 15 and 19 pipe. • Releasable—all ½”, ¾”, and 1” fittings are releasable and reusable with the Blu-Lock® release tool or “BLR” collar.
TEE
FIPT TEE
ELBOW
FIPT ELBOW
SPIG ELBOW
MIPT ELBOW
COUPLING
½”
B401-005
-
B406-005
B407-005
B409-005
B410-005
B429-005
¾”
B401-007
-
B406-007
-
-
B410-007
B429-007
1”
B401-010
-
B406-010
-
-
-
B429-010
½" x ¾”
B401-074
-
-
B407-074
-
-
-
½” x 1”
B401-075
-
-
-
-
-
¾" x ½”
B401-101
B402-101
-
B407-101
-
-
B429-101
¾” x 1”
B401-102
-
-
-
-
-
-
1" x ½"
B401-130
B401-130
-
B407-130
-
-
B429-130
1" x ¾"
B401-131
-
-
-
-
-
B429-131
FIPT ADAPTER
MIPT ADAPTER
CAP
SOC ADAPTER
INSERT TEE
INSERT COUPLING
½”
-
B436-005
-
-
-
-
¾”
B435-007
B436-007
B447-007
B474-007
-
-
1”
-
B436-010
B447-010
B474-010
-
--
¾" x ½"
-
B436-101
-
-
B1401-101 -
¾" x 1”
B435-102
-
-
-
-
1" x ½"
-
-
-
-
B1401-130 B1474-130
¾" x 1”
-
B436-131
-
B474-131
-
14
-
Blu-Lock® ½” Fittings · Max working pressure: 80 PSI at 72°F (23°C) · Burst Pressure: Exceeds 220 PSI ¾” BL Fittings: · Max working pressure: 125 PSI · Burst Pressure: Exceeds 250 PSI · Body Material: ABS · Retaining Ring Material: Stainless Steel · Seal Material: EPDM
PRE-MADE SWING JOINTS SWING JOINT
½" x 6"
BSWJ-060
¾" x 12"
BSWJ-007
1" x 12"
BSWJ-010
COMBO FITTING
½” x COMBO
BLJ410-005
½” x ¾” MIPT
BLJ410-101
TOOLS AND MISC. BLU-LOCK REMOVAL TOOL
¾” 1”
BLT-007 BLT-010
15
PVC-LOCK FITTINGS PVC-Lock push-on fittings are built for speed and built for green! Lose the toxic glues and primers, simply push and go. PVC-Lock works in wet and dry conditions, even under water, with instant pressurization. Fittings rotate 360 degrees after installation, for easy alignment. The only IAPMO certified outdoor irrigation push fitting.
For PVC Pipe
TEE
FIPT TEE
ELBOW
FIPT ELBOW
MAX WORKING PRESSURE: 150 PSI· BURST PRESSURE: 600 PSI
COUPLING
MIPT ADAPTER
CAP
½"
PL401-005
PL402-005
PL406-005
PL407-005
PL429-005
-
PL447-005
¾"
PL401-007
-
PL406-007
-
PL429-007
PL436-007
PL447-007
1"
PL401-010
-
PL406-010
-
PL429-010
PL436-010
PL447-010
¾" x ½"
-
PL402-101
-
PL407-101
PL429-101
-
-
¾" x 1"
PL401-102
-
-
-
-
-
-
1" x ½"
-
PL402-130
-
PL407-130
-
-
-
1" x ¾"
-
-
-
-
PL429-131
-
-
REMOVAL TOOL
SLIP FIX
FLEX COUPLING
½"
PLSF-005
PLFPC-005
½"
PLT-005
¾"
PLSF-007
PLFPC-007
¾"
PLT-007
1"
PLSF-010
PLFPC-010
1"
PLT-010
16
PRE-MADE SWING JOINTS Swing Joints allow you to adjust the height of a sprinkler without disturbing the pipe. It also acts like a shock absorber reducing damage to pipe if the sprinkler is stepped on or driven over.
POLY SWING JOINT
O-RING SWING JOINT
½” x 6”
SWJ-005
¾”
TSJ12075
½” x 12”
SWJ-012
1”
TSJ12
SO
Create your own
MARLEX FITTINGS MIPT X FIPT ELBOW
FIPT COUPLING
½”
412-006
430-006
¾”
412-008
-
1”
412-011
-
¾” x ½"
412-101
-
SWING PIPE FITTINGS 1.
½” SWING ELBOW
FEL-005
2. 3. 4. 5.
¾” SWING ELBOW ½” SWING MALE ADAPTER ½” SWING TEE ½” SWING COUPLING
FEL-101 FMA-005 FTEE-005 FCON-005
1.
2.
4.
3.
5.
For Swing Pipe
17
RISERS/NIPPLES
DIAMETER
L E N G T H
1/2” Close 882-005
3/4” 1” 1 1/4” 1 1/2” 2” 883-005 884-005 885-005 886-005 887-005
2”
882-020
883-020 884-020 885-020 886-020 887-020
3”
882-030
883-030 884-030 885-030 886-030 887-030
4”
882-040
883-040 884-040 885-040 886-040 887-040
6”
882-060
883-060 884-060 885-060 886-060 887-060
8”
882-080
883-080 884-080 885-080 886-080 887-080
10”
882-100
883-100 884-100 885-100 886-100 887-100
12”
882-120
883-120 884-120 885-120 886-120 887-120
18”
882-180
883-180 884-180 885-180 886-180 887-180
24”
882-240
883-240 884-240 885-240 886-240 887-240
36”
882-360
883-360 884-360 885-350 886-350 887-350
48”
882-480
883-480 884-480 885-480 886-480 887-480
60”
882-600
883-600 884-600 884-600 886-600 887-600
Sch40 Riser/Extender
PVC Riser/Extenders
1/2” Marlex (Black) 434-005
1/2”
3/4”
434-006
434-007
1/2” MNPT x 2 3/4” MNPT X 4” 1/2” - Black Cut Off - Black J04-030 J04-040
1/2” x 6” Cut Off - Black J04-060
3/4” MNPT x 6” - Black J06-060
1/2” X 7 1/2” MIPT X FIPT - Brown M491-005
BRASS FITTINGS FIPT X FIPT X FIPT BRASS TEE
18
FIPT X FIPT BRASS ELBOW
FIPT X MIPT FIPT X FIPTBRASS STREET BRASS COUP. ELBOW
FIPT BRASS CAP
BRASS MIPT X COMP
BRASS MIPT x COMP
½"
405-005B
408-005B
412-005B
430-005B
448-005B
-
-
¾"
405-007B
408-007B
412-007B
430-007B
448-007B
M436-007
M436-007
1"
405-010B
408-010B
412-010B
430-010B
448-010B
M436-010
M436-010
1-½"
405-015B
408-015B
412-015B
430-015B
-
M436-015
M436-015
2"
405-020B
408-020B
412-020B
430-020B
-
M436-020
M436-020
PVC DRAINAGE FITTINGS TEE
SANITARY TEE
45° WYE
45° ELBOW
90° ELBOW
90° LONG ELBOW
COUPLING
3”
401-030D
401-030DS
401-030DY
417-030D
406-030D
406-030DL
429-030D
4”
401-040D
401-030DS
401-040DY
417-040D
406-040D
406-040DL
429-040D
4” x 3”
429-422D FIPT ADAPTER
3”
435-030D
4”
435-040D
FIPT CLEANOUT
435S-040D
MIPT ADAPTER
SLIP CAP
MIPT PLUG
22-½° ELBOW
DRAIN GATE
VARI. ANGLE
436-030D
447-030D
450-030D
465-030D
SWG-030D
-
436-040D
447-040D
450-040D
465-040D
SWG-040D
NDS4PVAF
DOWNSPOUT
RED. BUSHING
2 x 3 x 3”
DSA-233D
FDSA-233D
3 x 2”
437-338D
2 x 3 x 4”
DSA-234D
FDSA-234D
4 x 2”
437-420D
4 x 3”
437-422D
CHANNEL DRAINS 2’ CHANNEL WAVE CHANNEL DRAINS
Green
NDS253G
Sand
NDS253S
Black
NDS253
Botanical Green
NDS252G
3’ with 2” Spigot Bottom Outlet 4’ 10” Grey
NDS400 NDS550 NDS400-10
19
2
1 1 2 3 4 5 6 7 7 8 9
6" Channel Installation Stake End Cap Channel Drain 3" Channel Coupling Channel Coupling 2" Sch 40 SPG End Outlet SURFACE DRAIN INLET 4" Spg 3” Corrugated to 3” drain pipe 4" Corrugated to 4" drain pipe FLO-WELL TANK 24” X 28.75” Basin 2’ Channel Drain, no grate, 4” bottom outlet
NDS230 NDS247 NDS548 NDS248 NDS246 FWSD69 NDS351 NDS451 FWTANK NDS234
3
4
5
6
7
EZFLOW DRAINAGE EZ FLOW CHANNEL (FRENCH) DRAINS
3” Drain Pipe, 7” Mesh 10’ Length 4” Drain Pipe, 10” Mesh 10’ Length
NDSEZ-0701F NDSEZ-1001F
The NDS French Drain is a prefabricated trench drain that is a gravel free option to a traditional French drain. It cuts installation time in half by eliminating the need to transport, shovel and move heavy gravel. It is made of 3 or 4 slotted corrugated pipe, surrounded by NDS poly-rock, and wrapped in a geotextile fabric.
CORRUGATED END CAP
20
CORRUGATED INTERNAL COUPLING
3"
NDS3C06
NDS3C07
4”
NDS4C06
NDS4C07
CATCH BASINS SQUARE ROUND CATCH BASIN CATCH BASIN CATCH BASIN FILTER
POP UP DRAINAGE EMITTER
ROUND GRATE BLACK
ROUND GRATE GREEN
ROUND GRATE GREY
2”
NDS900-2
-
-
-
-
-
-
3"
-
-
-
-
-
-
-
4"
-
-
-
DPOP
BRG4
GRG4
GRG4
6"
-
SPEED101
-
DPOP6
BRG6
GRG6
-
9"
NDS900-4
SPEED201
BF9
-
-
-
-
12"
CBS12
-
BF12
-
-
-
-
SQUARE GRATE BLACK
SQUARE GRATE GREEN
ATRIUM GRATE
UNIVERSAL OUTLET PLUG
4"
-
GAG4
-
6"
NDS5
GAG6
UAP6
9"
NDS980
BSG9
GAG9
-
12"
BSG12
GSG12
GAG12
-
COMBO OUTLET
4" x 3"
UL043
COMBO OFFSET OUTLET
UO034
SO
BULKHEADS & RUBBER FITTINGS COUPLING
TEE
ELBOW
FIPT BULKHEAD
½"
-
-
-
PBF005
¾"
-
-
-
PBF007
1"
-
-
-
PBF010
1-¼"
R56-12
-
-
PBF012
1-½"
R56-15
R56-15T
R56-15E
PBF015
1-½” x 1-¼”
R56-1512
-
-
-
2”
R56-22
R56-20T
R56-20E
PBF020
2” x 1-½”
R56-215
-
-
-
3”
R56-33
R56-30T
R56-30E
PBF030
3” x 2”
R56-32
-
-
-
4”
R56-44
-
-
PBF040
4" x 3"
R56-43
-
-
-
6" x 4"
R56-64
-
-
-
6” x 6”
R56-66
Durable PVC construction allows couplings to flex with normal earth movement. They are leak-proof, rootproof, completely unaffected by soil conditions and resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases due to the inert nature and physical properties of the material.
21
FEATURES AND BENEFITS
• O-Ring Shape and Volume—Allows more torque and compression to satisfy a wider variety of angles. Over 4X the size of the leading competitor.
HYDRO-RAIN MANIFOLD FITTINGS
• Sealing Surface—Has twice the surface area at critical connections between fittings and manifold.
• Buttress Threads—Provide exceptionally high axial MANIFOLD thrust so you can crank them hard and they have extremely low friction properties COUPLING so that you can hand tighten the fittings fast and effortlessly.
MANIFOLD CAP
SWIVEL x MIPT
SWIVEL x FIPT
BUTTRESS x MIPT
BUTTRESS x INSERT
HRB 100 1" NPT Commercial Valve with BL 1" 05107 B332-010 B335-010 B329-010 Adapter
B08303
B336-010M
HRJ-100-FB-75
-02002
HRJ 100 1" Jar Top Valve with BL ¾" Adapter
B08303-131
B336-007M
HRJ-100-FB-1X
02007
HRJ 100 1" Jar Top Valve with BL 1" Adapter
• High Deflection Temperature—Withstands pressure of 350 PSI and ambient temperature of 120°F.
*Patent Pending
• Patent Pending Swivel—Eliminates the need for primer and glue, and serves as the tool for threading the adapter into the valve.
MODELS
SkU
HRB-100-FB-1X 1"and Ultra Smooth B330-010 • True 1" I.D. Core—MaximizesB348-010 flow and minimizes friction loss.
1" x ¾"
-
• Three-Year Warranty—Hydro-Rain ensures full quality performance for the warranty period or we’ll replace it.
-
MANIFOLD
SPECIFICATIONS
DESCRIPTION
-
Next Generation Manifold: · Max working pressure: 250 PSI · Extra large o-ring · True 1” I.D. · Buttress Threads—Provide exceptionally high axial thrust so you can crank them hard.
• Max Working Pressure: 200~250 PSI (at 73˚ F)
• Burst Pressure: Exceeds 350 PSI (at 73˚ F)
• Dimensions: HRM-100-3P-BD: Length 10" x Width 2.5" HRM-100-2P-BD: Length 6.25" x Width 2.5" HRM-100-2P-BD: Length 3" x Width 2.5" 1 PORT B301-010
B301-010-2
3 PORT
B301-010-3
-
INSTALLATION SPECIFICATION
TEE
2 PORT
SWIVEL x PVC SLIP
DURA MANIFOLD FITTINGS SWIV. x SWIV. SLIP x SWIV.. x MIPT TEE x MIPT TEE
Larger O-ring for superior sealing surface
SWIVEL x MIPT 90°
SWIVEL x SWIVEL 90°
SWIVEL x SLIP 90°
SWIVEL x MIPT CROSS
SWIVEL x SLIP CROSS
(Patent-Pending) Tool Free Design
3101-36 Rev C
HYDRO-RAIN
u
(ph) 888-HYDRORAIN (fx) 801.203.1179
1"
301-010
u
www.hydrorain.com
301-011
SWIVEL x SLIP
u
915 Overland Street, North Salt Lake, UT 84054
306-009
SWIVEL x SWIVEL
306-010
SWIVEL x MIPT ADAPT.
ORING CAP
306-011
320-010
SWIVEL x BARB
ORING NIPPLE
1"
329-011
329-010
334-010
348-010
335-010
08303
1" x ½"
-
-
-
-
335-005
-
1" x ¾"
329-007
-
-
-
335-007
08303-131
SWIVEL x ORING
1"
332-010
1-½"
332-015
2"
332-020
22
Manifold System Fittings are O-Ring Sealed 200 PSI RATING
320-011
No tools, cutting, gluing or cementing required. The manifold system components contain O-ring seals to prevent leakage at the point of attachment. Assemble hand-tight for a positive seal. The manifold system allows for easy, fast installation and valve repair.
PHILMAC COMPRESSION FITTING FASTER
3. Pipe Insertion Insert the pipe into the joint until the first point of resistance is felt.
1. Cut Pipe Square Cut the pipe square using pipe cutters. There is no need to prepare the pipe end. Chamfering or lubrication is not required.
Engineered with a unique mechanical turn and lock design, Philmac 3G fittings allow faster, easier installation than brass or metal insert fittings.
4. Nut Tightening The nut should be tightened by hand and then firmly with a wrench. Tighten the nut all the way to the flange on the body of the fitting.
2. Ready to Use Position The fitting is preassembled and ready to use, ensure the nut is fully relaxed and two threads are showing before inserting the pipe.
STRONGER
The dynamic compression sealing provides higher pull-out resistance than brass or metal. Philmac offers strong, reliable service for a 50+ year design life.
5. Fully Installed The fitting is now fully installed.
TEE
FIPT TEE
90° ELBOW
COUPLING
FIPT ADAPTER
MIPT ADAPTER
¾"
P401-007
P402-007
P406-007
P429-007
P435-007
P436-007
1"
P401-010
P402-010
P406-010
P429-010
P435-010
P436-010
1-¼"
P401-012
P402-012
P406-012
P429-012
P435-012
P436-012
1-½"
P401-015
P402-015
P406-015
P429-015
P435-015
P436-015
2"
-
-
P406-020
P429-020
-
P436-020
1" x ¾"
-
P402-131
-
P429-131
-
P436-102
1-¼” x 1”
-
P402-168
-
-
-
-
CEPEX FITTINGS 1
3/4” COMPRESSION x COMPRESSION ELBOW
CP406-007
2
3/4” x 3/4” COMPRESSION x FIPT
CP435-007
3
1” COMPRESSION COUPLING
CP429-010
4
1” COMPRESSION TEE
CP401-010
5
1” x 1” COMPRESSION x FIPT
CP435-010
6
1” x 1” COMPRESSION x MIPT
CP436-010
2
3
4
1
5
6
23
PUSH FIT FITTINGS EASY INSTALLATION Ensure the pipe is cut square and rough edges and debris are removed. Mark pipe for 1” depth. Push pipe and fitting together. • Connects copper, CPVC and PEX pipe in any combination. • No soldering, clamps, unions or glue. • Certified to 200 PSI and 200°F. • Approved for use underground and behind walls without access panels. • Certified for potable water and hydronics. • Easy to disconnect if needed. TEE
ELBOW
FIPT DROPEAR
COUPLING
SLEEVE REQUIRED WHEN CONNECTING TO PEX PIPE
COUPLING LONG
FIPT ADAPTER
½"
SB401-005
SB406-005
SB407-005
SB429-005
SB429-005L
SB435-005
¾"
SB401-007
SB406-007
-
SB429-007
SB429-007L
SB435-007
1"
SB401-010
SB406-010
-
SB429-010
-
SB435-010
½" x ¾"
-
-
-
-
-
SB435-074
¾" x ½"
-
SB406-101
SB407-101
SB429-101
-
-
1" x ¾"
-
-
-
SB429-131
-
-
MIPT ADAPTER
CAP
BALL VALVE
DISCONNECT TOOL
STIFFENER
½"
SB436-005
SB447-005
SBBV-005
SBKEY-005
SBS-005
¾"
SB436-007
SB447-007
SBBV-007
SBKEY-007
SBS-007
1"
SB436-010
SB447-010
SBBV-010
SBKEY-010
SBS-010
½" x ¾"
SB436-074
-
-
-
-
½” SMART-LOC FITTINGS 1
ELBOW
SL401-005
2
TEE
SL406-005
3
COUPLING
SL429-005
4
MIPT ADAPT.
SL436-005
5
END PLUG
SL447-005
6
HOSE SWIVEL
SL500-005
1
24
2
FITS ALL ½” Polyethylene Tubing 16, 17, and 18mm Removable and Re-usable
3
4
5
6
GARDEN HOSE FITTINGS FHT SWIVEL x BARB
MHT x BARB
MHT x MIPT BRASS
¾"
500-007B
502-007B
503-007B
529-007B
530-007B
534-007B
536-007B
¾" x ½"
500-005B
502-005B
503-005B
529-005B
530-005B
534-005B
536-005B
MHT x MHT BRASS
¾"
503-008B
FHT X FHT
531-007B
FHT X FHT SWIVEL
532-007B
FHT SWIVEL MHT x FHT x INSERT SWIVEL TEE
FHT x FIPT
HOSE CAP WITH CHAIN
548-007B MHT x INSERT
FHT x FIPT SWIVEL
MALE x QUICK
MHQC-B
FHT x MIPT
FEMALE x QUICK
FHQC-B
MHT x FIPT
MALE x QUICK
BMQC
MHT x MIPT FHT SWIVEL BRASS x FIPT
MHT x SLIP ELBOW
FEMALE x QUICK
BFQC
MHT x FIPT MARLEX
¾"
500-007
501-007
502-007
503-007
508-007
510-007
-
¾" x ½"
500-005
-
502-005
503-005
-
510-005
512-101M
¾" x 1"
-
-
502-010
503-010
-
-
-
FHT x MHT ELBOW
FHT x FIPT SWIVEL
FHT SWIVEL x MIPT
FHT x SLIP
MHT x FIPT
FHT CAP
¾"
513-007
530-007
534-007
535-007
536-007
548-007
¾" x ½"
513-005 MPT 530-005
534-005
535-005
536-005
-
¾" x 1"
513-008
-
-
-
-
530-008
HOSE BIB NO LEAD
HOSE BIB PLASTIC
HOSE BIB T-HANDLE
HOSE BIB NON FREEZE
½"
HB-005NL
HB-005P
HB-005T
HB-005FFT
¾"
HB-007NL
-
HB-007T
-
2’ BURY YARD HYDRANT - 1” FPT HYDRANT REPAIR KIT
YH10-02 13YH-PKIT
25
Home
Contact Us
About Us
My Account
GO
Search
Home > Sprinkler Spikes & Bases > Spikes
Category
ECONOMY SERIES - QVS 47-MS Metal Die Cast Push-In Spike GARDEN HOSE & ACCESSORIES Base / Flow-Thur Design » Lawn & Garden Sprinklers » Commercial Ag Sprinklers
1
» NozzlesSPRINKLER and Wands
2
SPIKE
Part Number 001013
TSPIKE
SPIKE » GardenSTEP Hoses SPRINKLER & Hose
Accessories
3
WHEELED SLED BASE
SLED-B
½"PIPE SLED BASE
PB050
SWEEPER NOZZLE
SWEEPER
» Gutter Cleaners
4 5
» Sprinkler Spikes & Bases
6
Sprinklers TWIST NOZZLE
» Underground PopUp
7
NOZ-xL
8
» GaugesSHOWER
WAND-H
9
» Valves SPINNING
10
METALand SOAKER » Weld Flanges Fittings
11
KINK-007 Mailing HOSE List PROTECTOR Your Price: $2.98
12
33” Subscribe toPRO-FLO our Newsletter
NOZZLE ONLY SPRINKLER
54190N
7-PATTERN WAND
5/8" x 50’ HOSE
16
5/8" x 100’ HOSE
17
|
9
HOSE-STAN-50
Description
HOSE-STAN- 100
Zinc Die Cast Push-In Spike Base Brass Swivel Flow Through Design
56062N
14
13
Related Items 12
11
Share
56365
D-GRIP ADJUSTABLE NOZZLE
10
5
W75
Subscribe
Unsubscribe
6
Review this item
8 Please Login 7 customer to order this product. You need to be a registered W75S to your account or click here to Register.
¾" SCREEN WASHER
15
4
Email a friend
27423
Price
¾" RUBBERGO WASHER
14
3
2
NOZ-B
XLwith STREAM » Tri-Pods SprinklersNOZZLE
13
1
SPIKEB
15 16
17
AQUA-TRAXX PREMIUM DRIP TAPE 1
1
TEE
SPIN-T
2
COUPLING
QVS - 25' Coil Hose SPIN-C
3
VALVE
SPIN-V
4
SPIN x ¼" BARB VALVE
Your Price: $19.98 SPIN-V250
5
SPIN x ¼" BARB ADAPT.
SPIN-250
6
SPIN x ¾" FHT SWIVEL
SPIN-FHT
SPIN x ¾" MPT
SPIN-MPT
7 8
2 QVS - 50' Coil Hose
Your Price: $29.98
0 Review(s) 5
6 0 Review(s)
3STANDARD SERIES - Naan 4
435LG 1/2" Plastic Ajustable Part/Full Circle Plastic Impact Sprinkler
Your Price: $8.98
7
8
0 Review(s)
http://www.qvsprinkler.com/ECONOMY-SERIES--QVS-47-MS-Metal-Die-Cast-Push-In-Spike-Base-Flow-Thur-Design_p_175.html[02/27/11 9:59:54 PM] TAPE END CLOSURE TEC
8" SPACING 10mm
12" SPACING 10mm
per FT.
AQUATRAX-8
AQUATRAX-12
2,000’
AQUATRAX-8-2000
AQUATRAX-12-2000
7,500’
AQUATRAX-8-7500
AQUATRAX-12-7500 AQUA-TRAXX DRIP TAPE
26
TECHLINE EZ (12MM DRIPLINE) Techline EZ is the only 12mm pressure compensated dripperline. Most residential and commercial landscapes do not use the full hydraulic capabillities of a 17mm dripperline. At 12mm, Techline EZ provides better value for small and medium plant beds. It’s recycled content makes it eligible for LEED credits.
1
½" MIPT x 12 MM BARB
MA455BR
2
¾" MIPT x 12 MM - Y
Y-455BR
3
INSERT COUPLING
C-455BR
4
INSERT ELBOW
L-455BR
5
INSERT TEE
T-455BR
6
INSERT CROSS
CR455BR
7
12 MM x 17 MM RED. INSERT COUPLING
RC455BR
8
FIGURE EIGHT LINE END
FIG455BR
9
INSERT BALL VALVE
QAV-455BR
4
5
6
• Minimum bending radius: 6” • Maximum pressure: 50 psi, up to 70 psi with clamps • Recommended minimum filtration: 120 mesh
1
3
2
8
7
9
3/8” MICRO FITTINGS 1
3/8" INSERT COUPLING
C455
2
3/8" INSERT ELBOW
L455
3
3/8" INSERT TEE
T455
4
½" MIPT x 3/8" INSERT
MA455
5
½" FIPT x 3/8" INSERT
FA455
6
3/8" INSERT PLUG
EP455
7
½" SLIP x 3/8" COMP. ADAPT.
CA500
1
4
2
5
3
6 7
Fittings fit .375 ID and .455 OD tubing
27
DRIP-LOCK FITTINGS 1
1/2” DRIP-LOCK COUPLING
DL-429-005
2
1/2” DRIP-LOCK ELBOW
DL-406-005
3
1/2” DRIP-LOCK TEE
DL-401-005
4
1/2” DRIP-LOCK SHUT-OFF VALVE
DL-VLV-005
5
1/2” DRIP-LOCK CAP
DL-447-005
6
1/2” MIPT X 1/2” DRIP-LOCK ADAPTER
DL-436-005
7
3/4” MIPT X 1/2” DRIP-LOCK ADAPTER
DL-436-101
8
5/8” FHT X 1/2” DRIP-LOCK ADAPTER
DL-MHT-101
9
1/2” DRIP-LOCK X 1/2” STREET X DUAL 1/4” DRIP-LOCK COUPLING DLM-050-DD-STRE
10
1/2” X 1/2” DRIP-LOCK X DUAL 1/4” DRIP-LOCK COUPLING
DLM-050-DD-25
11
1”BL X 1”BL X 1/2” DRIP LOCK TEE
B401-130-DL
12
3/4” BLU-LOCK X 1/2” DRIP-LOCK TEE
B401-101-DL
1
2
8
3
4
5
6
9
10
11
12
7
Pro-Span
TM
Expansion Repair Coupling
DAWN QUICK REPAIR FITTINGS R
Features & Benefits
Features
Benefits
Flo Control’s patented “locking” feature allows the use of the body as a handle to glue both ends of the repair coupling onto the broken pipe. No other repair coupling allows the use of the body to glue both joints. Grip-Lock (Patented) Patented internal rotational lock of spigot to body
Dual-Seal A redundant seal design for safety!
Grip Lock
Dual-Seal
Stop the leak before it starts! Not all Repair Couplings include two seals!
Glue-Well Internal “trap” for excess glue on the socket end.
Pro-Span Glue-Well
Ensures glue stays where it should, so you don’t get “stuck” with a glued-together repair coupling. TM
Expansion Repair Coupling
KwikRepair TEE
Easy-Grip g and increased Eight “bars” with “easy to grip” edges Easyholding area
KwikRepair COULING
Pro-SpanCOUP.LING Grip
True-Cut Cutting the damaged pipe section to the length of the compressed coupling positions the piston Coupling
KRT401-005
KRC429-005
DF-005
¾"
KRT401-007
KRC429-007
DF-007
1"
KRT401-010
KRC429-010
DF-010
1-¼"
KRT401-012
KRC429-012
DF-012
1-½"
KRT401-015
KRC429-015
DF-015
2"
KRT401-020
KRC429-020
DF-020
2-½"
-
KRC429-025
DF-025
3"
-
KRC429-030
DF-030
4"
-
KRC429-040
DF-040
TM
now the best grip of any repair coupling available.
Redundant internal dual-seal for safety
Redundant internal dual-seal for safety
“True-Cut” automatically positions the piston seals in the body correctly. The correct position eliminates potential joint-separation stress caused by temperature swings, ground movement, or changes in line pressure. With True-Cut you get a perfect installation every time.
Easy-Grip bars for improved handling with wet hands
Featuring patented Grip-Lock that locks spigot to body for effective gluing
True-Cut feature ensures perfect cut FREE 800-726-1994 to size N.TOLL every time Harvard Ave. Lindsay, CA 93247
0801
½"
Featuring patented Grip-Lock that locks spigot to body Positive grip for wet and muddy hands. effective gluing Easier to twist while for pushing or pulling when gluing. This is
FLOF01
Cut Length
28
Flo Control’s patented “locking” feature allows the use of the body as a handle to glue both ends of the repair coupling onto the broken pipe. No other repair coupling allows the use of the body to glue both joints.
www.NDSPRO.com
Positive grip for wet and muddy hands.
PVC COMPRESSION FITTINGS COMPRESSION COUP.
COMP x SLIP TEE
½"
SC29-005
SC01-005
¾"
SC29-007
SC01-007
1"
SC29-010
SC01-010
1-¼"
SC29-012
SC01-012
1-½"
SC29-015
SC01-015
2"
SC29-020
SC01-020
2-½"
SC29-025
-
3"
SC29-030
-
4"
SC29-040
-
Tap into existing lines and connect do different materials such as steel, plastic, copper, or brass. Compression fittings allow repairs without having to use glue. This is especially useful in wet or cold conditions.
VALVES BARBED BALL VALVE
BARB x MIPT BV
FPT BRASS BALL VAL.
FPT BRASS GATE VAL.
BALL VAL. W/DRAIN
½"
QAV-005
QAV-005T
BV-005
GV-005
-
¾"
QAV-007
-
BV-007
GV-007
BVWD-007
1"
QAV-010
-
BV-010
GV-010
BVWD-010
1-¼"
-
-
BV-012
GV-012
-
1-½"
-
-
BV-015
GV-015
-
2"
-
-
BV-020
GV-020
-
3"
-
-
BV-030
GV-030
-
Operating pressure range up to 45 PSI at temperature to 100°F.
400 PSI for water, oil or gas (WOG)
200 PSI for water, oil or gas (WOG)
MICRO VALVE
Operating pressure range up to 45 PSI at temperature to 100°F.
10/32" THREAD x THREAD
PVFVTT
10/32" x ¼" THREAD x BARB
PVFVTB
¼" x ¼" BARB
PVFVBB
29
PVC BALL VALVES THR. PVC BALL VAL
SLIP PVC BALL VAL
TRUE UNION BALL VAL.
TU BALL W/ CHECK
3 WAY VALVE
SLIP KNIFE VALVE
1-½" x 2"
½"
PBV-005T
PBV-005S
¾"
PBV-007T
PBV-007S
1"
PBV-010T
PBV-010S
TUBV-010
1-¼"
PBV-012T
PBV-012S
TUBV-012
1-½"
PBV-015T
PBV-015S
TUBV-015
TUSCBV-015
KGV-015
2"
PBV-020T
PBV-020S
TUBV-020
TUSCBV-020
KGV-020
3"
PBV-030T
PBV-030S
4"
PBV-040T
PBV-040S
3WAYV
Divert water 2 ways with just 1 valve. Great for limited space
MISCELLANEOUS VALVES 1
BRASS HOSE VALVE
BBV
2
BRASS HOSE VALVE LONG HANDLE
BBVL
3
HOSE VALVE 45 DEG FHTxMHT
BBV-45
4
BRASS HOSE Y
BY
5
BRASS HOSE Y SWIVEL BALL VALVE
BYBV
6
PRO FLOW 4 PORT HOSE MANIFOLD
BYBV
7
½” AUTO DRAIN
PYPV-4
8
PLASTIC HOSE Y
KD-005
9
4 WAY BRASS HOSE Y
BYBV-4
10
FHT BLOWOUT CONNECTOR
GPV01
1
4
8
10
30
3
2
5
6
9
7
QUICK COUPLER WORKS AS A FLUSH MOUNTED WATER SUPPLY OR A BLOWOUT CONNECTOR.
¾" QUICK COUPLER
075-SLSC
1" QUICK COUPLER
100-SLSC
¾" QUICK COUPLER KEY
075-SLK
1" QUICK COUPLER KEY
100-SLK
¾" HOSE SWIVEL
075-75-MHS
1" HOSE SWIVEL
075-MHS
¾" QUICK COUPLER
3RC
¾" QUICK COUPLER KEY
33DK
1" QUICK COUPLER
44RC
1" QUICK COUPLER KEY
44K
1", 1 PIECE QUICK COUPLER
5RC
1" MIPT TOP THREAD KEY
55K1
CAM-LOCK FITTINGS Type A
Polypropylene
CAM-A-010
Type B
CAM-B-010
Type C
CAM-C-010
Type D
CAM-D-010
Type E
CAM-E-010
Type F
CAM-F-010
Type DC
Type DP
CAM-DC-010
CAM-DP-010
31
BACKFLOW PREVENTION 1. 2. 3.
VACUUM BREAKER & DUAL CHECK VALVES PVC CHECK VALVES DUAL CHECK VALVE ASSEMBLY
A backflow prevention device is used to protect potable water supplies from contamination or pollution due to backflow. In water supply systems, water is normally maintained at a significant pressure to enable water to flow from the tap, shower, or other fixture. Water pressure may fail or be reduced when a water main bursts, pipes freeze, or there is unexpectedly high demand on the water system (for example, when several fire hydrants are opened). Reduced pressure in the pipe may allow contaminated water from the soil, from storage, or from other sources to be drawn up into the system.
VACUUM BREAKER & DUAL CHECK VALVES A HOSE BIB VACUUM BREAKER SHOULD NOT BE UNDER CONSTANT PRESSURE FOR MORE THAN 12 HOURS.
HOSE BIB VACUUM BREAK
ATMOSPHER- DUAL CHECK IC VACUUM VALVE BREAKER
¾"
HBVB
AVB-007
DCA-007W
1"
-
-
DCA-010W
1-½"
-
AVB-015W
-
2"
-
AVB-020W
-
Must be installed 6” higher than the zone it is protecting
32
PVC CHECK VALVES SLIP SWING CHECK
THR. SWING CHECK
SLIP SPRING CHECK
THR. SPRING CHECK
ADJ. CHECK VALVE
½"
SCV-005S
SCV-005T
PCV-005S
PCV-005T
ICV-005
¾"
SCV-007S
SCV-007T
PCV-007S
PCV-007T
ICV-007
1"
SCV-010S
SCV-010T
PCV-010S
PCV-010T
ICV-010
1-¼"
SCV-012S
SCV-012T
PCV-012S
PCV-012T
-
1-½"
SCV-015S
SCV-015T
PCV-015S
PCV-015T
-
2"
SCV-020S
SCV-020T
PCV-020
PCV-020T
-
Hold back 12’ of water.
Designed for low pressure systems like water gardens.
Adjust check valve for varying heights.
Dual Check Valve Assembly
DOUBLE CHECK VAL
DOUBLE CHECK VALVE
BLOWOUT FITTING
REPLACEMENT VESSEL
½"
DCVA-005W
¾"
DCVA-007Z
DCVA-007-BOF
DCVA-007Z-VESSEL
¾"
DCVA-007W
1"
DCVA-010Z
DCVA-010Z-BOF
DCVA-010Z-VESSEL
1"
DCVA-010W
1-½"
DCVA-015W
2"
DCVA-020W
The EZSwap™ removable pressure vessel provides safe and easy line flushing, quick winterization, and simple
33
PRESSURE REDUCERS 1. 2. 3.
REDUCED PRESSURE ASSEMBLY BRASS STATIC PRESSURE REDUCER SENNINGER PRESSURE REGULATOR
A pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restrictor and a sensor all in the one body, or consist of a separate pressure sensor, controller and flow valve.
REDUCED PRESSURE ASSEMBLY REDUCED PRESS.
½"
RPVA-005W
¾"
RPVA-007W
1"
RPVA-010W
1-½"
RPVA-015W
2"
RPVA-020W
BACK FLOW TEST KIT Since RPVA vent regularly, proper drainage is required.
TK5
Back flow testing equipment available contact us for a quoted price.
BRASS STATIC PRESSURE REDUCER 25-75 PSI BRASS STATIC REDUCER
25-75 PSI BRASS STATIC REDUCER
¾"
PRV-007W
PRV-007Z
1"
PRV-010W
PRV-010Z
34
Larger sizes avaliable by special order.
Maximum 400 PSI inlet pressure
SENNINGER PRESSURE REGULATOR Always install pressure regulators downstream from all shut-off valves. Be sure to install pressure regulators in the proper direction. The arrow on the housing shows the direction of the flow and should always point downstream toward devices.
Most plastic regulators reduce pressure in moving water only, not static.
¾" GARDENHOSE
¾" FIPT
1" FIPT
¾" ADJUSTABLE
Max. 125 PSI inlet pressure. 10 PSI
PRH10
PRP10-007
PRP10-010
12 - 35 PSI
PR-ADJ-L
15 PSI
PRH15
PRP15-007
PRP15-010
28 - 60 PSI
PR-ADJ-H
20 PSI
PRH20
PRP20-007
PRP20-010
25 PSI
PRH25
PRP25-007
PRP25-010
30 PSI
PRH30
PRP30-007
PRP30-010
35 PSI
PRH35
-
-
40 PSI
PRH40
-
-
50 PSI
-
PRP50LV-007 PRP50LV-010
.1 - 7 gpm flow rate. Maximum 100 PSI inlet pressure.
.2 - 22 gpm flow rate. Simple screw adjustment.
.2 - 20 gpm flow rate.
35
FILTRATION DISK FILTER SCREEN FILTER DRINK WATER FILTER PUMPS
1. 2. 3. 4.
A water filter removes impurities by lowering contamination of water using a fine physical barrier, a chemical process, or a biological process. Filters cleanse water to different extents for purposes such as providing agricultural irrigation, accessible drinking water, public and private aquariums, and the safe use of ponds and swimming pools.
DISK FILTER Disk filters are good at removing both particulates, like sand, and organic matter. A disk filter consists of a stack of round disks. The face of each disk is covered with various sized small bumps. A close up view of the bumps reveals that each has a sharp point on the top of it, somewhat like a tiny pyramid. These bumps are very small, thus a typical disk looks a lot like the old vinyl 45 RPM records! Because of the bumps, the disks have tiny spaces between them when stacked together. The water is forced between the disks, and the particulates are filtered out because they won’t fit through these gaps. The organics are snagged by the sharp points on the bumps. For cleaning of the filter the disks are separated from each other which frees the debris to be flushed out. DISK Y-FILTER
150 MESH DISK CART.
DISK Y-FILTER
80 MESH DISK CARTRIDGE
¾"
TDF150-075
-
DF120-075
DFR07580Y
1"
TDF150-010
-
DF120-010
DFR150080Y
1-½"
TDF150-015
-
DF120S-015
DFR150L080Y
2"
TDF150-020
TDFR020
DF120-020
DFR200080Y
3"
TDF150-030
TDFR030
-
-
BODY REPLACEMENT
COVER REPLACE
O-RING
All filters come standard with 80 mesh screen. State which colour when ordering replacement cartridges.
NUT
WRENCH
¾"
DFBODY075
DFCOVER075 DFORING075
-
-
1"
DFBODY010
DFCOVER010 DFORING020
DFNUTOIO
FWRENCH
1-½"
-
DFCOVER015 -
DFNUTOIO
FWRENCH
36
SCREEN FILTER Screen filters are probably the most common filters and in most cases the least expensive. Screen filters are excellent for removing hard particulates from water, such as sand. They are not so great at removing organic materials such as algae, mold, slime, and other unmentionables! These non-solid materials tend to embed themselves into the screen material where they are very difficult to remove. In other cases they simply slide through the holes in the screen by temporarily deforming their shape. INLINE FILTER
½ BARB
PIH6-A
¾" HOSE THR.
PIFH6
REPLACEM. FILTER
¾” INLINE
Great for small systems or limited space. Contains 155 mesh screen.
9031RS
Y - FILTER PIPE THREAD
Y HOSE THR. T-FILTER
Y FILTER O-RING
155 MESH SCREEN POLYESTER
155 MESH SCREEN STAINLESS STEEL
SCREEN FILTER
¾"
PFPC64
PFPC64-H
PFP-ORING
903R
903SS
-
1-½"
-
-
-
-
-
P75-155L
2"
-
-
-
-
-
P80-155
DRINKING WATER FILTRATION 1" -10" BIG BLUE KIT
BB10KIT
1" -20" BIG BLUE KIT
BB20KIT
¾" -10" BLUE HOUSING
CHF-007
1" SPINDOWN INLINE
SPINDOWN-010
1-½" SPINDOWN INLINE
SPINDOWN-015
2" SPINDOWN INLINE
SPINDOWN-020
4-½” X 10”
4-½” X 10”
STANDARD
5 MICRON SPUN POLY
HOW DOES CARBON FILTRATION WORK
There are two principal mechanisms by which activated carbon removes contaminants from water; absorption, and catalytic reduction, a process involving the attraction of negatively-charged contaminant ions to the positively-charged activated carbon. Organic compounds are removed by absorption and residual disinfectants such as chlorine and chloramine are removed by catalytic reduction.
CLEANABLE
10 MICRON CARBON CARTRIDGE
10" x 2.5"
S-5
C-10
20" x 2.5"
S-5-20
C-10-20
10" x 4.5"
GS-5
GC-10
20" x 4.5"
GS-5-20
GC-10-20
37
PUMPS 1
FW-EK05
½ HP SHALLOW WELL JET PUMP
1
FW-EK07S
¾ HP SHALLOW WELL JET PUMP
1
FW-EK10S
1 HP SHALLOW WELL JET PUMP
2
SPJ100
1 HP PORTABLE LAWN SPRINKLER PUMP
3
FW-4F11P05005S
½ HP, 11 GPM, 115V, 2W SUB PUMP
3
FW-4F11P05301S
½ HP, 11 GPM, 230V, 3W SUB PUMP
3
FW-4F19P10301S
1 HP, 19 GPM, 230V, 3W SUB PUMP
4
CIS-115
.5 HP, 10 GPM, 115V, 2W CISTERN PUMP
4
CIS-230
5 HP, 10 GPM, 230V, 2W CISTERN PUMP
5
5025PVSP
¼ HP, 30 GPM SUMP PUMP
6
FW-023817
12V TRANSFER UTILITY/PUMP
6
FW-024481
115V TRANSFER UTILITY/PUMP
7
2-07TK-25-2NL
1" x 10" NO LEAD TANK TEE
8
860D-120-10
120V PUMP DOWN SWITCH/ 10’ CORD
8
860U-120-10
120V PUMP UP SWITCH/ 10’ CORD
9
CB-QD-005-230
½ HP, 230V, 4", 3-WIRE CONTROL BOx
9
CB-QD-1-230
1 HP, 230V, 4", 3-WIRE CONTROL BOx
10
PA-100NL
1" BRASS PIT-LESS ADAPTER/ 150PSI MAX
11
PA-125NL
1-¼" BRASS PIT-LESS ADAPTER/ 150PSI MAX
12
PS02-3050
¼" FPT PRESSURE SWITCH 30-50PSI
12
PS02-4060
¼" FPT PRESSURE SWITCH 40-60PSI
38
1
3
2
4
5
6
7
8
9
10
MICRO IRRIGATION 1. 2. 3. 4. 5. 6.
DRIPPER MICRO SPRAYS FOGGER ADAPTER AND BUBBLER STAKES ACCESSORIES
There are several types of micro-irrigation systems. Many of the components are the same for all of these types of systems. Most systems typically include filters, pipes, valves, and tubing. The main difference is in the type of emission device that is used to deliver the water to the plants. Drip irrigation utilizes drip emitters that deliver water at very low rates. The typical range is 0.2 to 4.0 gallons per hour. In some systems, the emitters are installed manually on the outside of the tubing and placed where needed. Other systems might use integral dripperline or drip tape with the emitters already installed at a predetermined spacing.
DRIP EMITTER DRIPPER
PC DRIPPER
SELF PIERCING DRIPPER
MIDI DRIP STAKE
INLINE DRIPPER
CETA DRIPPER
0.5 GPH
AD-5
NGE02
SPCV05
-
MIL5
-
1 GPH
AD-100
NGE04
SPCV10
9031
MIL10
CETA-100
2 GPH
AD-200
NGE08
SPCV20
-
-
CETAT-100
- sealed to maintain preset discharge rates
- ‘self cleaning’ - closes below 2-3 PSI to prevent draining
- easy to install with the self piercing insert tool
- take apart for easy cleaning
- allows multiple drippers on a single line
- Pressure compensation - self-flushing
24" OUTLET SPIDER
2 OUTLET
DBS2S-24
4 OUTLET
DBS4S-24
The Black Spider addon assembly is ideal for allowing additional distribution to an NGE emitter.
SELF PIERCING INSERT TOOL
SPDT
39
FLAG DRIPPER FLAG DRIPPER
Proven Classic® (non-pressure compensating) hydraulic design. Best dripper for gravity feed systems.
• Barbed inlet allows emitters to be installed directly onto hose or used with 1⁄4” (4mm) leader tubing. • Take-apart feature, allows fast simple field inspection.
1 GPH BLACK
FLAG-100
2 GPH BLUE
FLAG-200
4 GPH GREEN
FLAG-400
MINI BUBBLER ™ control with shut-off option Finger-tip flow Vari-Jets
1
BARB MINI BUBBLER
VJBB
2
1032 THR. MINI BUBBLER
VJBT
3
½"® FIPT x MINI BUBBLER
VJBF
4
MINI BUBBLER ON STAKE
VJBSValve adjusts flow and coverage.
1
3
2
Spike model to anchor Mini Bubbler at the plant Designed for localized high flow watering like trees.
Features
4
• Choice of spray patterns. Gentle umbrella • Threaded for installation on Rigid Risers. pattern. Flow and • UV stabilized materials for long life.
coverage can be altered by Home and landscapedrotating gardens. the Vari-Mist™ cap. is ideal for adjusting overhead Applications
watering of plants in hanging baskets.
VARI-JET AND VARI-MIST SPRayS
- Invert Vari-Mist™ overhead of plants like hanging baskets. - Valve adjusts flow and coverage. - Threaded for installation on Rigid Risers. VARI JET
Vari-Jet™ 360° x 18 hole 10-32 UNF Thread
90°
PVJ-06Q
180°
PVJ-06H
360°
PVJ-06F
Performance 360° x 18
*Minimum Opening Size BASE & PrESSUrE FLow orIFICE SIzE (psi) (gph)
STANDARD BASE MAX 0.06”
MIST BASE MAX 0.014”
10 15 20 25 30
0 0 0 0 0
-
16.7 21.0 24.5 28.0 31.0
10 15 20 25 30
0 0 0 0 0
-
4.0 5.0 5.9 6.6 7.4
Mist
0.02” 0.05” DIAmEtEr oF throw (ft) 0 0 0 0 0
-
18.4 22.6 25.7 26.7 26.3
180°
0 0 0 0 0 0 0 0 0 0
-
90°
0.06” 0.06” rADIUS oF throw (ft) -
6.7 8.1 9.5 10.1 10.6
0 0 0 0 0
-
6.4 8.1 9.4 9.8 10.3
3.0 2.6 2.9 2.8 2.6
* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from spray to mist.
360° MIST VM-360
40
Vari-Jet™ SPrAy PAttErn 360° x 18 hole
BASE Black 10-32 UNF
CAP CoLor
PArt nUmBEr
PACk QUAntIty
PACkS PEr CArton
CArton (lbs)
Black
13145
50
50
16.2
• Spike model to anchor Shrubbler ®at the plant. • Spike model to anchor Shrubbler at the plant. • In-Line Spike model suits 0.16” ID connection tube. • In-Line Spike model suits 0.16” ID connection tube. • Barb model for direct attachment to feeder and supply lines. • Barb model for direct attachment to feeder and supply lines. • Threaded model for installation into Rigid Risers and Asta®®Stakes. • Threaded model for installation into Rigid Risers and Asta Stakes. • 1/2” Threaded model for riser pipe installations. • 1/2” Threaded model for riser pipe installations.
can be altered by rotating the cap.
Features
SHRUBBLER 1
• Finger-tip flow control with shut-off option. • Spike model to anchor Shrubbler® at the plant. • In-Line Spike model suits 0.16” ID connection tube. • Barb model for direct attachment to feeder and supply lines. • Threaded model for installation into Rigid Risers and Asta® Stakes. SHRUBBLER 5.3" STAKE VJSS-18 • 180° 1/2” Threaded model for riser pipe installations.
2
360° SHRUBBLER 5.3" STAKE Applications
3
Pots, tubs, landscaped gardens andSTK nurseries. Ideal for hanging baskets. 360° INLINE SHRUBBLER VJSST-36 In-Line Spike model suitable for planter boxes.
360° SHRUBBLER STAKE PC
VJSS-36PC
6
180° SHRUBBLER BARB
VJSB-18
7
360° SHRUBBLER BARB
VJSB-36
(ft) 1.9
88
1010
® ® Shrubbler Shrubbler
2.0 2.0 Single Piece Jets
14
0.067” Number of clicks Red 0.075”
2.8 3.3 3.8 3.6 4.1 4.7
15545 15525 15515
0.075”100 100
50 10 50 15 50 20
rate100
50 50 50
WING-05H 15645 100 100 WING-05F 15745 100
•
7.4 27.4 7.4 0 31.4
1010.8
Performance
HOME
UV StABILIzED mAtErIALS 0
10
acetal
PrESSUrE Jet orIFICE SIzE Single Piece (psi)
SPrAy 7.4 PAttErn 7.4 Single 360˚ Piece Jets 180˚ 360° 90˚
SPrAy CoLor PArt A n t e l c o i r r i g a t i o n e q u i p m e n tBlue • U S A c a t a l o g • 2 0 110 0 • w w w . a n t e l c o . c7.5 om PAttErn nUmBEr Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com 0.04” 15 9.5 Single Single Single 360˚ Blue 15445 20 Piece180˚ Jets PieceBlue Jets Piece15425 Jets 11.0 360° 180° 90° 90˚ Blue 15415
360˚ PACk
Black 0.067”
10 15 20
360˚ 180˚ 90˚ 360˚ 180˚ 90˚
10 15 20
360˚
Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com Single Piece Jets 180°
Single Red Piece Jets 0.075” 90°
HOME 180˚
10 Red 15 Specifications 20
Bl ue
si)
20
•
HOME
•
Single Piece J 4.6
5.3 SPrAy 6.0 PAttErn 5.6 360˚ 6.3 180˚ 7.0 90˚
360˚ PACk 180˚ QUAntIty 90˚ 100 100 100
21.7 27.4 31.4
0.87” 0.5” 0.021 oz
C
PA
Specifications
100 100 DImEnSI 100 HEIGHT WIDTH100 across wings 100 WEIGHT (approx) 100
Red PEr 15745 100 PACkS CArton Red CArton A n t e15725 l c(lbs) o i r r i g a t i o100 n equipm Red 15715 100 50 7.4 50 7.4 50 7.4
Specifications
100 50 100 DImEnSIonS50 180° 90° 100 50 HEIGHT 0.87” 50 WIDTH100 across wings 0.5” rADIUS 100 50 WEIGHT (approx) 0.021 oz (ft) 50 100
7.4 7.4 UV StABILIzED mAtErIAL 7.4 7.4 7.4 7.4
3.6
7.4 4.1 7.4 UV StABILIzED mAtErIALS 7.4 4.7
acetal
7.4 7.4 7.4
acetal
4.6 5.3 BASE/ConnECtIon tyPE 6.0
Inlet: “QUICK” THREAD 0.16”
4.3 5.0 5.6
5.6 6.3 7.0
5.0 5.6 6.3
6.3 6.9 7.6
15745 100 50 7.4 28.2 10.2 A n t e l 15725 c o i r r i g a t i o n100e q u i p m e n t50• U S A c a t7.4 alog • 2010 • www.antelco.com 15715 100 50 7.4
Red Red
90˚
HEIGHT WIDTH across wings WEIGHT (approx)
7.0
15545 100 50 18.8 15525 100DImEnSIonS7.9 50 15515 50 21.8HEIGHT100 8.9 0.87” 15645 100 50 WIDTH across wings 0.5” 19.4WEIGHT (approx) 8.4 15625 100 50 0.021 oz 15615 100 50 24.2 9.3
Black Black Black
90˚ 100 100 100
Black
1 ® 10
Red5.7PEr 15745 50 4.0 7.4 PACkS CArton 2.8100 Red CArtonA n t e l15725 c2.8 o(lbs) i r r i g a t i o 100 n e q u i p m e n50 t • U S A c a 7.4 talog • 2010 • www 3.3100 Red6.6 15715 50 4.6 7.4 50 7.4 7.5 3.8 5.3 50 7.4 50 7.4
Specifications 15.0
Green Green Green
DImEnSIonS
Flow rate
90˚ 100 100 100
15645 15625 15615
360˚ PACk
HOME 180˚ QUAntIty
15545 15525 15515 35
DIAmEtEr Black (ft) Black
180˚ 90˚
180˚ HOME QUAntIty
Green 0.06”
PArt nUmBEr
15645 15625 15615
WING-07FBlack
Single 15445 Piece15425 Jets 90° 15415
360˚ Green BASE/ConnECtIon tyPE Green 180˚ 360° 20 25 90˚ Green 30 Discharge (gph) Inlet: “QUICK” THREAD 0.16”Black 360˚
FLow (gph)
HOME
CoLor
Single Blue PieceBlue Jets 180° Blue
15545 15525 35 15515
WING-07HBlack
7.4
WING-06F 7.4
Single Piece Jet 7.4
PArt nUmBEr
Green 30 Green
4.0 4.6 5.3
HOME HOME
Single 15445 Piece Jets 15425 90° 15415
WING-07QGreen
5.0 360˚ 6.3 5.6 180˚ 6.9 20 25 6.3 90˚ 7.6 Discharge (gph) 360˚ 180˚ 90˚
15
1
90°
21.7 rADIUS 27.4 (ft) 31.40
SPRayS
WIDTH across wings 0.5” AnD WEIGHT (approx) CoLor 0.021 oz
15
9.8
19.4 24.2 15 28.2
5.0 6.3 360˚ 5.6 6.9 180˚ 20 6.3 7.6 25 90˚ Discharge (gph) 360˚ 180˚ 90˚
Re d
Single Blue Piece Jets Blue 180° Blue
WING-06H 7.4
Red 50 180˚ Red 1572520 100 50 A n t e l c o i r r i g a t i o n e q u i90˚ p m e n t • URed S A c a t a l o g15715 • 2 0 1 0 • w100 w w . a n t e l c o50 .com Single Single Piece Jets Piece Jets 15 180° 90°
Bl ac k
Single 360˚ 5.6 6.3 Piece Jets 180˚ 360° 90˚ 7.0
9.0 9.8 10.8
UV StABILIzED mAtErIALS
BASE/ConnECtIon tyPE
acetal
Inlet: “QUICK” THREAD 0.16”
Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com
Re d
15625 Flow 15615
90˚ WING-04F 360˚
Single Piece Jets 360°
re en
4.3 5.0 5.6
G
8.4 9.3 10.2
Bl ue
CoLor
7.4 19.4 7.4 24.2 15 7.4 28.2
WING-06Q 7.4 21.7 9.0
4.3 5.0 5.6
•
Pressure (psi)
50 10 50 15 50 20
d
Black 100 0.067”100 100
Re
WING-04H 360˚
15445 15425 15415
WING-05Q Red 100
Green
20.6Green 24.6Black 13.8Black Black 14.4
WINGED BASE WITH ‘QUICK’ THREADSpecifications DImEnSIonS e q FOR u i p m eRAPID n t • U SAND A c a tEASY a l o g • INSTALLATION 2010 • www.antelco.com HEIGHT 0.87”
ment • USA catalog • 2010 • www.antelco.com
10 15 20
•
(lbs)Green WING-04Q 360˚
180˚
4.6 5.3 SPrAy
•
Blue Blue CArton Blue
180˚ 90˚
3.6 4.1
Bl ac k
Single Piece Jets 360°
180°
15
7.0 7.9
20
ac k
50 50 50 40
15.0 CArton 18.8
Bl
100 100 25 25
360˚ 180˚ 90˚
10 PACkS 15 PEr
QUAntIty CArton (lbs) 20 21.8 8.9 4.7 6.0 PAttErn Home nUmBEr and landscaped gardens and horticultural applications.
•
* For product specifications see page 1.2
10 15 20
15
•
Green Applications PArt 0.06”PACk
CoLor
•
-
Radius (ft) Radius (ft)
• No tools required.
en
PACkS PEr CArton
TF318
en
15
re
31245 31215 31225 31295
24.6 13.87.0 13.8 14.47.9 14.4
15.0 18.8 20 21.8
21.7 9.0 13.8 CoLor AnD PrESSUrE FLow Red DIAmEtEr 10 rADIUS 0.075” 15 27.4 9.8 (psi) 30 (gph) 0 10 • 15 35 c a t a l o g •(ft)2 0 1 0 • w w w . (ft) Choice of three spray patterns – 360°, 180°, 90°. 14.4 A tn ri rgorIFICE i ag20tai toi SIzE o ne q e25 q an0nt teel lccoo. .ccoo10 m An et lecl oc oi r irDischarge n uu i pi p mm e en nt t • • U US SAA7.5 c a t a l o g • 5.7 2 0 1 020 • w 2.8 w w . a31.4 m10.8 (gph) Blue 10 4.0 14.3 • Four color coded flow rates. 0.04” 15 9.5 6.6 3.3 4.6 Flow 20 11.0 rate 7.5 3.8 5.3 Single Piece Jet Single Piece Jet
PACk
TF39QUAntIty
50 50 50 40 40
10 15 20
25 25 25
7.5 9.5
11.0 Flow rate 15.0 18.8 20 21.8
Features 20 11 GPH (lbs) GREEN GPH GREEN 25 GPH BLACK 30 GPH8.9 RED productspecifications specificationssee seepage page1.2 1.2 Black ** ForFor product 10 19.4 8.4 0.16” 500.16” 20.6 • Winged base with ‘Quick’ thread for rapid and easy installation. 0.067” 15 24.2 9.3 Performance 4 FT RADIUS 5 FT RADIUS 6 FT RADIUS 7 FT RADIUS 20 28.2 10.2 50 24.6 360° 180° 90° 50 40 40
1.0 1.0
0.06”
G
25 25 25
31225 31295 31295
•
6 GPH BLACK 2FT 100 RADIUS 100
31215 100 for effective watering. 31225 Green 25 ac k
PACkS PEr® ®20 Shrubbler Shrubbler CArton In-Line Spike In-Line Spike
Bl
PACk QUAntIty
5.6 6.3
Pressure (psi)
Barb 0.16” Thread 10-32 UNF Thread 1/2” FNPT Spike
Antelco irrigation
tyPE Barb 0.16” Barb 0.16” Thread 10-32UNF UNF 10-32 Economical Thread fan spray jet Thread 1/2” FNPT Thread 1/2” FNPT CArton Spike Spike
3
FLow Red DIA (gph) 0.075”
10 15 20
Black Performance 0.067” 360° 5.0 6.3 FLow Red CArton DIAmEtEr 5.6 CoLor AnD 6.9PACk PrESSUrEPACkS PEr PArt PArt PACk PACkS PEr CArton 0.075” orIFICE SIzE (psi) (gph) (ft) 6.3 7.6 nUmBEr QUAntIty CArton (lbs) nUmBEr CArton (lbs) Blue QUAntIty 10 7.5 5.7 31245 100 50 9.5 20.66.6 0.04” 15 31245 100 50 20.6 20 11.0 rate 24.67.5 31215 100 50 Flow
9.0 9.8 10.8
•
PArt nUmBEr
21.7 27.4 BASE BASE 31.4 tyPE
® Shrubbler Shrubbler Thread 1/2” Thread 1/2”
SPrAy PAttErn
90° 360°
10 15 20
®
Shrubbler® 180° BASE tyPE
4.3 5.0
14.4 14.4 Green 14.3 0.06” 14.3
5.6 7.0 Home and landscaped gardens and horticultural applications.
•
31445 31415 31425 31495 30995
19.4 8.4 24.2 9.3 Applications ® ® 10.2 28.2
15 20
•
Barb 0.16” Thread 10-32 UNF Thread 1/2” FNPT Spike In-Line Spike
Single Piece Jets Shrubbler 180° Shrubbler 180° 2210
40 40 40 40
SPRayS
PArt nUmBEr
10 15 20
20
Flow rate
BASE tyPE
180°
16 Black 18
Black 0.067”
en
12
en
10
Green 0.06”
re
Green 0.06”
8
• No tools required. Spike 31495 25 15.0 7.0 3.6 4.6 25 Spike 31495 18.8 7.9 4.1 5.3 25 In-Line Spike 30995 25 • Choice of three spray patterns – 360°, 180°, 90°. In-Line Spike 30995 21.8 8.9 4.7 6.0 • Four color coded flow rates.
re
WING JETS Number of clicks
20
G
0
• 10 • 15 psi 15
Blue 0.04”
0.5
22
Blue 0.04”
®
ue
20
patented Shrubbler® Performance Applications 180° Home 90° and landscapedPACkS gardens and horticultural applications. PArt adjustment. PACk PACkS PEr CArton PArt PACk PEr withnUmBEr flow Flow and CArton rADIUS nUmBEr QUAntIty CArton CoLor AnD (lbs) PrESSUrE QUAntIty CArton (lbs) jet for effective (ft)watering. orIFICE SIzE (psi) can be4.0100 altered by5050rotating Barb 0.16” coverage 31445 100 20.6 Barb 31445 20.6 7.50.16” 5.7 2.8 Features Blue 24.6 10 Thread 10-32UNF UNF6.6 31415 100 50 Thread 31415 100 50 24.6 9.5 10-32 3.3 4.6 0.04” 15 • Winged base with ‘Quick’ thread for rapid and easy installation. 11.0 7.5 3.8 the5.325 cap. Thread 1/2” FNPT 31425 25 50 13.8 Thread 1/2” FNPT 31425 50 13.8 20 FLow DIAmEtEr tyPE fan tyPE Economical spray (gph) (ft)
re
18
0 0 88 10 16 18 10 12 12 14 14 16 18 20 20 22 22
Number Numberofofclicks clicks • Winged base with ‘Quick’ thread for rapid and easy installation. • No tools required. • Choice of three spray patterns – 360°, 180°, 90°. • Four color coded flow rates.
360°
BASE BASE
PrESSUrE (psi)20 psi
ue
16
CoLor AnD orIFICE SIzE
®® Shrubbler 360° original Shrubbler 360° The
Performance • 30 psi
Bl
14
Number Numberofofclicks clicks
•
12
P
Home and landscaped gardens and horticultura
0.5 0.5
Single Piece Jets
CoLor AnD orIFICE SIzE
Pressure (psi)
10
1.0 1.0
0 0 1010 1212 1414 1616 1818 2020 22 22 Features
20Thread 22 10-32 UNF Thread 10-32 UNF
••20 20psi psi Applications ••15 15psi psi
1.5 1.5
••2020psipsi ••1515psipsi
G
18
Economical fan spray jet for effective watering.
Bl
16
Home and
22 22
• Choice of three spray patterns – 360°, 180°, ••30 30psi psi • Four color coded flow rates.
••3030psipsi
d
Number of clicks
14
20 20
• Winged base with ‘Quick’ thread for rapid an
•
12
Radius (ft)
1.0
18 18
Features
Re
10
Bl
8
2.0 maintains diameter of throw • 30 psi 1.5 of over a wide range • 20 psi 1.0 inlet pressures. • 15 psi
2.0
16 16
Economical fan spray jet for effective watering.
G
6
14 14
radius 180° radiusof ofthrow throw• 180° No tools required.
2.02.0
•
4
1212
Number Numberofofclicks clicks
1.01.0
3.0
• www.antelco.com
66
SPRayS
Diameter (ft)
44
Home and landscaped gardens and horticultural applications.
Shrubbler® 360°
hrubbler® read 1/2”
22
• Winged base with ‘Quick’ thread for rapid and easy installation. • No tools required. Diameter Diameterofofthrow throw360° 360° • 30 psi • Choice of three spray patterns – 360°, 180°, 90°. 3.03.0 • Four color coded flow rates. • 20 psi
Diameter of throw 360° Compensating radius of throw 180° Pressure
0
00
Features
• 15 psi
2
Applicat
®
Economical fan spray jet for effective watering.
Applications
• Winged • No tool • Choice • Four co
Single Piece Jets
44 22
1.5 2.0
Barb 0.16” Barb 0.16”
VJSF-363.0
14 12 10 8 6 4 2 0
hrubbler® d 10-32 UNF
®
Features
••30 30psi psi ••20 20psi psi ••15 15psi psi
6 gph PC Version
8
®
Shrubbler Shrubbler® Spike 0.16” Spike 0.16” with adapter with adapter ®
Sing
Economic
Diameter (ft) Diameter (ft)
Discharge (gph)
1414
8 Piece VJSF-181.2Single 1.2 6Jets 6 Shrubbler Shrubbler
Flow rate 360° & 180°
hrubbler® rb 0.16”
1.2 1.2 1.5 1.5 2.0 2.0
•
20
360° SHRUBBLER ½" FIPT 30
1.2 1.2 1.9 1.9 3.0 3.0
rADIUS1212 (ft) 1010
Pressure (psi)
11
8.7 8.7 10.3 10.3 13.0 13.0
Pressure (psi)
DIAmEtEr VJST-36
8.7 10.3 13.0
1515 2020 3030
•
PrESSUrE 10/32’" FLow 360° SHRUBBLER THR. (gph)
180° 180° rADIUS rADIUS (ft) (ft)
ue
9
(psi)
360° 360° DIAmEtEr DIAmEtEr (ft) (ft)
10/32”
VJST-18360°
180° SHRUBBLER ½" FIPT 15
FLow FLow (gph) (gph)
Flow rateTHR. 360° & 180° 180° Flow rate 360° & 180°
180° SHRUBBLER 10/32" THR. fully open (approx. 22 clicks)
PrESSUrE PrESSUrE (psi) (psi) fully fullyopen open (approx. (approx. 2222clicks) clicks)
8 10
Performance Performance ¼” BARB
Discharge (gph) Discharge (gph)
Performance
Pots, Pots,tubs, tubs,landscaped landscapedgardens gardensand andnurseries. nurseries.Ideal Idealfor forhanging hangingbaskets. baskets. In-Line In-LineSpike Spikemodel modelsuitable suitablefor forplanter planterboxes. boxes.
VJSS-36
DRIPPERS DRIPPERS
5
Applications Applications
2.8
41
Performance and Specification Performance Performance and Specifications and Specifications
MINI SPRINKLER
ROTOR SPRAY™
ROTOR SPRAY MINI SPRAY
Performance
ROTOR SPRAY™
Performance
VARI-ROTOR SPRAY™ ROTOR SPRAY™
9 GPH
BASE
PrESS.
FLow
CoLor & orIFICE SIzE
(psi)
(gph)
15 20 25
8.1 9.4 10.5
15 20 25
Brown 0.035”
MS-BROWN
BASE PrESS. Tested Tested 0.65 0.65 ft ft CoLor & (psi) above above ground ground orIFICE SIzE
Features 26 GPH
17Green 17 0.05” 17
15 20 25 30
16.8 19.5 22.0 24.0
Green 19 0.05” 21 21 23
15 20 25 30
14 16 21 24
16.8 19.5 22.0 24.0
19 21 Red 21 0.06” 23
11 15 12 20 25 13 30 14
• Finger-tip flow control with shut-off option.
30 GPH MS-ORANGE • Spike model to anchor Spectrum™ at the plant. • Barb model for direct attachment to feeder and supply lines. 40 GPH MS-GREY
• Threaded model for installation into Rigid Risers and Asta® Stakes. • 1/2” Threaded model for riser pipe installations.
Red 0.06”
15 20 25 30
22.5 26.5 30.0 33.0
23 Red 0.06” 23 27 27
15 20 25 30
21 23 27 28
22.5 26.5 30.0 33.0
23 23Orange 27 0.07” 27
Applications
Orange 0.07”
15 20 25 30
27.0 31.5 35.5 39.0
Orange 25 0.07” 27 29 29
15 20 25 30
16 19 21 24
27.0 31.5 35.5 39.0
25 27 Gray 0.08” 29 29
Gray 0.08”
15 20 25 30
32.5 39.0 43.5 48.0
Gray 25 0.08” 27 29 31
15 20 25 30
18 24 27 28
32.5 39.0 43.5 48.0
25 Black 27 max 29 0.06” 31
Black
15 20 25 30
-
Black max 0.06”
15 20 25 ® 30
0 0 0 0
180 Pots, DEFLECTOR MS-DEF tubs, ground cover, landscaped gardens and nurseries. Waters large garden when used with Asta BLACK ADJ.areas MINI SPRINKLER
®
Stakes and risers. MS-VARY
™ Spectrum 360° Adjustable Flow Vari-Rotor Spray™
max Deflector 0.06”
Performance
22.0 26.0 30.0 33.0
SPECTRUM (psi)
Features
(gph)
DImEnSIonS ASSEmBLED
(ft)
fully open 15 17.3 • Finger-tip flow control with shut-off option. (approx. 20 19.8 Spike model to anchor Spectrum™ at the plant. 22• clicks) 30 24.3
9.4 11.2 13.3
HEIGHT WIDTH WEIGHT (approx)
Discharge (gph)
• Barb model for direct attachment to feeder and supply lines. UV STABILIZED Threaded model for installation into Rigid Risers and Asta® Stakes. MATERIALS Flow • rate 1 • 1/2” Threaded model for riser pipe installations. 360 SPECTRUM 5.3" STAKE SPEC-6 24 20 16 12 8 4
2 3
Applications 360 SPECTRUM
¼" BARB
1
SPEC-250
• 30 psi KNOB • 20 psi BASE/CONNECTION • 15 psi
SPEC-005 18 20
22
TYPE: Inlet Pots, tubs, ground cover, landscaped gardens and nurseries. Waters large 360 10/32 THR. and risers. SPEC-1032 garden areasSPECTRUM when used with Asta® Stakes
40
2
3604 SPECTRUM ½" FIPT 6 8 10 12
Number of clicks
14
Diameter of throw Performance 14 12 10 8 6 4 2 fully open
(approx.
4
15 20 30 8
6
• 30 psi • 20 psi • 15 psi
360°
PrESSUrE (psi)
0 22 clicks) 2
16
FLow (gph)
10
17.3 19.8
12 24.314
Number of clicks
DIAmEtEr (ft) 9.4 11.2
16
18 13.3 20
22
Discharge (gph)
Flow rate Spectrum™ 360˚ 24
HOME
Spike
32095
14 25 Number of clicks
• 30 psi • 20 psi
UV STABILIZED acetal MATERIALS acetal nylon -
2
14 12
Diameter (ft)
10 HEIGHT 8 WIDTH 6 DEPTH 4 WEIGHT (approx) 2
UV STABILIZED 0 2 MATERIAL
BArB
1.0” 0.8” 0.6” 0.07 oz
BASE polypropylene acetal 6 8 10 12 14 CAP4 polypropylene polypropylene Number of clicks DEFLECTOR acetal acetal
BASE/CONNECTION TYPE: Inlet
BARB 0.16”
Spectrum™ 360˚
42
thrEAD
1.0” 0.8” 0.6” 0.06 oz
10-32 UNF THREAD
13.8 15.7
HOME A n t e l c o15.6 irrigation 18
HOME
32045
50
tAPEr 1.0” 0.8” 0.6” 0.10 oz
(ft)
17.9 11 19.4 12 20.3 13
13.2 13.8 13.8
17.9 19.4 20.3
19 21 21 23
18.5 14 19.4 16 20.3 21 19.1 24
13.9 14.8 15.7
18.5 19.4 20.3
23 23 27 27
20.0 21 20.9 23 21.8 27 28 20.4 20.8 16 22.2 19 24.0 21 24 21.2 23.0 18 24 23.9 27 24.4 28 21.2 23.0 23.9 24.4
13.9 14.8 15.7 16.6
19.1 20.0 20.9 21.8
14.5 15.4 16.0 16.5
20.4 20.8 22.2 24.0
15.1 15.6 16.3 17.2
21.2 23.0 23.9 24.4
- 23 0 - 21 -Specifications 23 0 - 23 - 27 0 - 27 - 27 0 - 28 DImEnSIonS ASSEmBLED
0 0 0 0
25 27 29 29 25 27 29 31
KNOB
-
-
3
HDPE
15.1 015.6 016.3 017.2 0-
• 30 psi thrEAD 1/2” • 20 psi
1.5” • 15 psi 1.0” 1.0” 0.17 oz
SPIkE 5.3” 1.7” 0.6” 0.19 oz
polypropylene 20 22 polypropylene acetal
polypropylene polypropylene acetal
TAPER # 6 (Refer Page 4.0)
THREAD 1/2” FNPT
BARB 0.16”
13.8
21.2 023.0 023.9 024.4 0-
23 23 27 27
- 23 0 - 21 - 23 0 - 23 - 27 0 - 27 -rotor 27 0 - 28 rotor SPrAy™ SPrAy™ and InVErtED and InVErtED rotor SPrAy™ rotor SPrAy™
21 23 27 28
VArI-r SPrA
1.4” 1.1” VArI-rotor 0.08 oz SPrAy™ acetal acetal 1.8” nylon 1.1”
1.8 1.1 0.1
ace ace nylo
0.13 oz HD
-
UNF acetal TAPER # 6 acetal 10-32 acetal 10-32 acetal 0.16”acetal (Refer Page 4.0)acetal THREAD acetal THREAD acetal nylon nylon nylon nylon
-
4 HDPE
HDPE
TAPER # 6 10-32 UNF 10-32 UNF TAPER # 6 TAPER # 610-32 UNF (Refer Page THREAD 4.0) 0.16” THREAD 0.16” (Refer Page (Refer 4.0) Page THREAD 4.0) 0.16”
HDPE TAPER # 6 (Refer Page 4.0)
Finger-tip flow control with shut-off option.
e qAuni tpeml ce on ti r•r i U g aS tAi ocna teaql u o igp m • e2n0t 1 •0 U • Sw A wcwa .t aa nl ot eg l c• o 2 . c0o1m0 • w w w . a n t e l c o . c o m
acetal 16 18 polypropylene acetal
50
DIAmEtEr
(ft)
Antelco irrigation equipment • USA catalog • 2010 • www.antelco
2015.3 22
m™ BASE PArt PACk PACkS PEr CArton n tUNF e l c o i r r i g a t i otyPE n e q u i p m e n t •nUmBEr U S A c a t a l oQUAntIty g • 2010 • w w w . a n t e l c o . c(lbs) om CArton 32 Barb 0.16”
0 0 0 0
13.9 22.5 14.8 26.5 15.7 30.0 16.6 33.0 14.5 27.0 15.4 31.5 16.0 35.5 16.5 39.0 15.1 32.5 15.6 39.0 16.3 43.5 17.2 48.0 15.1 0 - 22.0 15.6 0 - 26.0 16.3 0 - 30.0 17.2 0 - 33.0
FRAME acetal BASE/CONNECTION acetal acetal Inlet BASE acetal TYPE: acetal acetal FLIPPER nylon nylon nylon
BASE/CONNECTION 10-32 UNF TYPE: THREAD Inlet0.16”
Specifications Diameter of throw DImEnSIonS ASSEmBLED
DIAmEtEr
hEIght (ft) 11 (inch)13
CArton • 15 psi (lbs)
PACkS PEr CArton 50 50 50 16 40
22.0 26.0 30.0 33.0
13.9 14.8 15.7
DIAmEtEr StrEAm 10
HEIGHT 1.4” WIDTH 1.1” VArI-rotor rotorDImEnSIonS SPrAy™ rotor SPrAy™ rotor SPrAy™ VArI-rotor rotor SPrAy™ VArI-rotor WEIGHT (approx) 0.07 oz SPrAy™ and InVErtED ASSEmBLED and InVErtED and InVErtEDSPrAy™ and InVErtEDSPrAy™ rotor SPrAy™ rotor SPrAy™ rotor SPrAy™ rotor UV STABILIZED FRAME SPrAy™ acetal MATERIALS BASE acetal HEIGHT 1.4” 1.4” 1.4” 1.8” 1.4” 1.8” 1.8” nylon WIDTH1.1” 1.1” 1.1” 1.1”FLIPPER 1.1” 1.1” 1.1” WEIGHT (approx) 0.07 oz 0.08 oz 0.07 oz 0.12 oz 0.13 oz 0.12 oz KNOB 0.08 oz -
SPRayS
Diameter (ft)
FRAME BASE FLIPPER
-
16.8 19.5 22.0 24.0
Specifications
SPRayS
An adjustable flow, full circle vortex sprayer with Flow 360°fine water droplets. Specifications and coverage can be altered by rotating PrESSUrE FLowthe cap. DIAmEtEr
n equipment • USA catalog • 2010 • www.antelco.com 20 PArt PACk 16 BASE nUmBEr QUAntIty 12 tyPE 8 0.16” Barb 32045 50 4 Thread 10-32 UNF 32015 50 l c• o 2 . c0o1m0 • w Thread 1/2” FNPT ww.antelco.com 32025 25 0 2 4 6 8 10 12
m™ 32 UNF
0 0 0 0
15 16 20 21 25 24 30 21 15 23 20 27 25 28 30 16 15 19 20 21 25 24 30 18 15 24 20 27 25 28 30
Tested 0.65 ft above ground
SPRINklERS
9.8 11.7 10-320.04” 17 20 12 11.7 UNF Thread 13.0 17 25 13 13.0
Green Rotor Spray™ 10-32 UNF0.05” Thread
Rotor Spray™ 10-32 UNF Thread
MS-RED
DIAmEtEr DIAmEtEr 8.1 15 (ft)(ft) 17 17 9.8 13.2 17 11.7 13.8 17 13.0 13.8 17
(ft) (ft)0.035” hEIght hEIght 20 9.4 (inch) (inch) 25 10.5
10 15 11 20 13 25
0.04”
INVERTED ROTOR SPRAY™
FLow DIAmEtEr StrEAm DIAmEtEr StrEAm Tested 2.6Tested ft Tested 0.65 ft6.6 ft Tested 2.6 ft Tested 6.6 ft (gph) (ft) hEIght (ft) hEIght above ground aboveabove ground ground above ground above ground (inch) (inch)
DIAmEtEr DIAmEtEr StrEAm Brown StrEAm 15
15 Blue 17 0.04” 17
11 GPH MS-BLUE An adjustable flow, full circle vortex sprayer with fine water droplets.Blue Flow and coverage can be altered by rotating the cap. 20 GPH MS-GREEN
Durable and DIAmEtEr BASE PrESS. StrEAm FLow CoLor (ft) & (psi) hEIght (gph) reliable with orIFICE SIzE (inch) excellent Brown 15 15 10 8.1 0.035” 17 20 11 9.4 ® distribution 17 25 13 10.5 Blue 17Spray™ 15 11 9.8 Rotor uniformity
®
Tested 0.65 ft above ground
Performance Tested 0.65 ft above ground
Spectrum™ 360° Adjustable Flow
VARI-ROTOR SPRAY™ INVERTED ROTOR SPRAY™
VARI-ROTOR SPRAY™
2.0
3.1
ROTOR MAX
Robust and reliable “spinner” sprinkler for use above and below plant foliage and with two trajectory options. Excellent sprinkler distribution patterns and performance.
Features
• Dual outlet spinner enhances performance. 30' 30' • Standard model has a 25° trajectory, black colored spinner. Greenhouses, vegetable row crops and • Inverted model has a 0° flat trajectory, khaki colored spinner. DIAMETER DIAMETER under tree watering. Inverted Rotor • Suitable for recycled water applications subject to adequate filtration. Max™ is ideal for over-head watering in • Easily taken apart for servicing. • UV stabilized materials for long life. glasshouse, Mini-compact model 52-866-xx is a highly efficient micro nursery and shade house Applications applications. The 0° trajectory sprinkler is sprinkler without a bridge, designed to irrigate in an Greenhouses, vegetable row crops and under tree watering. Inverted Rotor Max™foris greenhouses. It can be connected inverted position also suited to standard upright operation, ideal for over-head watering in glasshouse, nursery and shade house applications. directly to a lateralThe vine with or without an antileak device for under 0° trajectory sprinkler is also suited to standard upright operation, excellent for underat the beginning or excellent to prevent dripping at the end of each GPH RM-RED IRM-RED foliage or wind affected locations. foliage or wind affected locations. irrigation cycle, keeping the entire line pressurized.
TITLE MINI-COMPACT MICRO SPRINKLER SERIES 866
90
120 GPH
RM-BLACK
MODELSDescr 52-8
IRM-BLACK
APPLICATIONS Rotor Max™ tested 0.65 ft above ground
Performance nozzLE CoLor
PrESSUrE (psi) 15 20 30 40 15 20 30 40 15 20 30 40
Red 0.11” Black 0.13” Purple 0.15”
FLow (gpm) 1.3 1.5 1.8 2.1 1.7 2.0 2.4 2.8 2.4 2.8 3.7 4.2
MINI COMPACT
Inverted Rotor Max™ • Suits all applications in irrigation and propagation tested 6.6 ft above ground • Use in greenhouses and nurseries
le Pu
MINI-COMPACT MICRO SPRINKLER
•
•
Bl
rp
ac k
d Re
•
7YLZZ\YL WZP
d
+PZJOHYNL NWT
9 GPH - 18 ft. - BLUE
52-866-09
nozzLE
PArt
PACk
Red Black Purple
0.11”
21055
20
0.15”
21065
20
15 GPH - 230.13” ft. - GREY 21005 52-866-15 20
DESCRIPTION
Micro sprinkler on 1/2” FNPT base Micro sprinkler assembly with 12” m tubing, antileak device, .270 OD bar 52-866-xx-24 Patented Micro sprinkler assembly with 24” m antileak device, .270 OD barb and w • Trouble free operation even at low 52-866-xx-36 Micro sprinkler assembly with 36” m pressure. AND TECHNICAL DATA PERFORMANCE antileak device, .270 OD barb and w • •Material: polyacetal Antileak device (low pressure) Color coded specially designed nozzle with52-530-05 • Flow rates: 9 - 42 GPH (35 - 160 L/H) device (high pressure) The C-Frame Downspray is 52-530-10 a 360° sprayAntileak jet that distributes water backup filter. • Diameter of coverage: 15’ - 29’ (4.5 - 8.7 m) 50-255-xx Micro tubing assembly with weight across the wetted surface area. Stake assembly options provide s 50-822-0 1/2” FNPT base • Operating pressure: 15 - 35 PSI (1 - 2.4 BAR) • Allows a large number of micro sprinklers to operate at the •same time due to lower flow rate Excellent performance with uniform ® • distribution. Uniform growth of root system due to optimal ratio of water in the soil
52-866-xx-0 52-866-xx-12
water
labor and installation time.
52-866-10
13 GPH - 22 ft. SIzE - VIOLET CoLor orIFICE nUmBEr 52-866-13 QUAntIty
MODEL BENEFITS
CFd Downspray
rotor max™ 10 GPH - 201/2” ft. - OLIVE
Operating pressure in overlapping irrigation: 25 - 30 PSI (1.7 - 2.0 BAR) Pattern: 360° Trajectory angle: approximately –5° Droplet size: medium Filter requirement: 120 mesh (130 micron) up to 24 GPH, 24 - 42 GPH 80 mesh (180 micron)
• Made of durable materials ensuring resistance to most chemicals and fertilizers for long-lived trouble free operation
* Stream height is applicable only to the Rotor Max™
Flow rate
• • • • •
DIAmEtEr StrEAm hEIght (ft) (ft) FEATURES 36.0 3.0 39.0 • Excellent performance with uniform water distribution 3.5 43.0 • Trouble free operation even at low pressure 4.0 43.0 4.5 • Color coded specially designed nozzle with backup filter 36.0 3.0 39.0 • Firm compact construction without a bridge gives a complete 3.5 360° circle 4.0 43.0 45.0 • Modular design allows for wide range of interchangeable 4.2 40.0 components 2.3 42.0 2.7 46.0 • Nozzle has a small backup filter for protection against 3.4 penetration of dirt 45.0 3.9
PACkS PEr CArton 10 10 10
Model CArton Nozzle(lbs) Color 14.1
FLOW RATE AND DIAMETER Features 52-866-09 52-866-10 52-866-13 52-866-15 52-866-18 52-866-24 52-866-32 52-866-42 Lt. Blue Silver Blue Violet Gray Black Green Red Brown • 45° downspray reduces the effect of wind.
• Gentle spray minimizes damage to delicate plant foliage.
Nozzle14.1 size (inch) .031 .035 .039 .043 .047 .051 .059 .071 14.1 FLOW RATE AT 29.4 PSI (2 BAR) • Galvanized wire stake assembly with 36” tubing. NOMINAL 18 GPH - 25 ft. - GREY 52-866-18 Flow rates (GPH) 9 10 • Three color coded frames to identify flow rates. 13 15 18 24 32 42 Wetting diameter (feet) 18 20 22 23 25 28 29 33 24 GPH 28 ft. GREEN 52-866-24 • “Quick” thread for easy insertion into tubing. Inverted rotor max™ 1/2” PERFORMANCE AT 6’ (1.8M) HEIGHT hread • Shut-Off Clip to stop flow. PERFORMANCE AT 20 PSI (1.4 BAR) 32 GPH - 29 ft. - RED PArt 52-866-32 nozzLE PACk PACkS PEr CArton Flow (lbs) rates (GPH) 7.8 8.9 • UV stabilized for long life. 11.0 13.1 15.5 20.0 26.6 35.5 CoLor orIFICE SIzE nUmBEr QUAntIty CArton 42 GPH - 330.11” ft. - BROWN Wetting diameter (feet) 15 17 18 20 21 22 23 25 Red 21555 52-866-42 20 10 14.1 Black 0.13” 21505 20 10 14.1 Applications PERFORMANCE AT 25 PSI (1.7 BAR) Purple 0.15” 21565 20 10 14.1 Flow rates (GPH) 8.6 9.9 Nurseries, 12.4 14.9 lots, 17.4potted 22.3 plants, 29.7 home 39.7 and landscaped tree Wetting diameter (feet) 17 18 19 21 23 23 24 26 Rectangular Spacing (feet) 8 x 10 8 x 10 10 x 10 12 x 12 12 x 12 12 x 12 12 x 16 12 x 16 Specifications Application rate (in/hr) 0.17 0.19 0.19 0.17 0.19 0.24 0.24 0.33 PERFORMANCE AT 30 PSI (2.1 BAR) DImEnSIonS ASSEmBLED UV StABILIzED mAtErIAL BASE/ConnECtIon tyPE Flow rates (GPH) 9.5 evenly 10.9 Performance 13.6 16.3 19.0 24.4 32.6 area. 43.4 The C-Frame Downspray isFRAME a 360° spray jet thatInlet: distributes water across the wetted surface HEIGHT 3.8” polypropylene THREAD y tested Wetting diameter1/2” BSPM (feet) 18 19 21 22 24 25 26 28 WIDTH 3.5” SPINNER acetal 360° Centre, Rectangular Spacing (feet) 10 x 12 12 x 12 12 x 12 13 x 15 15 x 15 15 x 15 16 x 16 16 x 18 WEIGHT (approx) 0.95 oz NOZZLE acetal CoLor AnD FLow 0.36 DIAmEtEr Application rate (in/hr) 0.19 0.21 0.21 0.18 PrESSUrE 0.21 0.27 0.17 DOWN SPRAYS (psi) (gph) (in) PERFORMANCE AT 35 PSI (2.4 BAR) orIFICE SIzE Flow rates (GPH) 10.3 11.7 Black 14.7 17.6 20.5 26.4 35.2 46.9 10 4.8 24 ® CFd® CFd CFd® Wetting diameter (feet) 18 200.032”22 23 24 26 286.0 29 15 24 HOME n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 0 Downspray • w w w . a n t eDownspray lco.com Downspray Rectangular Spacing (feet) 10 x 12 12 x 12 12 x 12 13 x 15 15 15 x 15 16 x7.2 16 16 x 18 20x 15 20 Black Brown Blue Application rate (in/hr) 0.20 0.23 0.23 0.20 0.22 0.29 0.29 0.39
gardens
DOWN SPRAY
5
6 GPH
CFD-6
8 GPH
CFD-8
10 GPH
CFD-10
Brown 0.035”
10 15 20
6.0 7.5 8.6
24 20 20
Blue 0.039”
10 15 20
7.0 8.9 10.5
24 20 20
CFd® Downspray CoLor
orIFICE SIzE
PArt nUmBEr
PACk QUAntIty
Micr
43
PACkS PE CArton
micro Spray Jets: Caps and Bases
S
18 hole
®
15 hole
12 hole
180˚ fan 90˚ fan Strip (2 x 20˚)
10 hole
Black Black Black
10825 10815 10885
100 100 100
50 50 50
3.6 3.6 3.6
TEST & Flow rates micro Spray Jets: Performance Jet Bases
MICRO SPRAY JETS 270° (3 x 90°)
180° fan
Hexagon JET Jet MICRO Base 10-32 UNF Thread BASE
BASE
PArt
PACk
PACkS PEr
10925 10915 10935 10955 10975 10945 10985
100 100 100 100 100 100 100
50 50 50 50 50 50 50
CArton (lbs)
A large combination rates spray patterns the CoLorof flow orIFICE SIzE and tyPE nUmBEris achievable QUAntIty when CArton 90° Black bases are0.03” Hexagon 10905 jets. 100 50 rangeStrip of caps and assembled into two piece
Brown 0.035” Hexagon Blue 0.04” Hexagon Green 0.05” Hexagon Red 0.06” Hexagon Winged Jet • Caps available in eight spray patterns. Orange 0.07” Hexagon Base with Gray 0.08” Hexagon • Eight color coded bases to identify flow rate. “Quick” Thread White 0.09” Hexagon fan
®
(2 x 20°)
Features
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6
micro Spray Jets: Caps and Bases
Performance
• Jet assemblies made to order. Black 0.03”360˚ X 18Winged 10705 MIST 360˚ X 15 360˚ X 12 300˚ X100 10 270˚ X 3 50 2 X 20˚ 6.5 90˚ 180˚ Brown 0.035” Winged 10725 100 50 6.5 • Caps and bases can be ordered separately. Blue 0.04” Winged 10715 100 50 6.5 0.05” *Minimum opening size 0.02” 0.03” 0.03” 0.05” 0.05” 0.06” 0.06” 0.02” Green 0.05” Winged 10735 100 50 6.5 • Available in 10-32 Hex and Winged “Quick” thread. combination of flow 100 rates and spray patterns is achievableDIAmEtEr when the Red 0.06” A large Winged 10755 50 6.5 BASE PrESS. FLow DIAmEtEr rADIUS CoLor & (psi) (gph) (ft) are assembled into two piece jets. (ft) (ft) range of caps and bases Applications orIFICE SIzE
0.07”
4.4 5.0 5.4 5.6 7.5 GPH BROWN PB-05 6.7 4.8 9 GPH BLUE PB-04 5.3 TEST 5.7 14.5 GPH GREEN PB-06 25 9.6 16.9 15.0 15.0 19.5 9.8 10-3221.4 8.2 5.9 BASE/CONNECTION TYPE: Inlet “QUICK” THREAD 0.16” UNF THREAD 30 10.5 18.6 16.8 17.6 22.0 9.4 22.5 8.6 6.3 20 GPH RED PB-08 Applications SPrAy CAP10 PACkS CArton 7.0 PArt13.4 10.5PACk 11.2 10.9 PEr12.5 11.5 5.2 5.2 Assemblies suit garden watering PAttErn QUAntIty CArton (lbs) 25 GPH ORANGE PB-09 Blue CoLor 25 8.9nUmBEr 15.8 12.6 14.6 bed 16.3 13.3and landscaped 15.9 6.7areas. 6.0 0.04” 20 10.5 18.2 14.8 16.4 21.4 10.6 17.7 7.7 6.4 360˚ x 18 hole Black 10845 100 50 3.6 25 12.0 19.6 17.5 17.6 25.3 11.1 19.0 8.5 6.6 31 GPH GREY PB-07 360˚ x 15 hole Black30 10855 100 50 3.6 13.3 20.4 20.9 23.0 28.6 10.6 19.0 9.2 7.0 360˚ x 12 hole Black 10865 100 50 3.6 44 GPH WHITE PB-10 11.5 10875 17.4 15.8100 13.0 12.850 11.0 15.5 5.8 5.7 300˚ x 10 hole Black10 3.6 Green Black15 14.5 10835 21.1 19.1100 16.7 18.850 11.5 19.3 7.4 6.6 270˚ (3 x 90˚) 3.6 360° 360° 360° 300° 0.05” 20 17.2 22.5 20.0 19.1 22.5 12.0 22.4 8.4 7.2 180˚ fan 3.6 18 hole 15 hole 12JET hole CAP 10 hole 25 19.5 10825 23.3 22.1100 20.3 25.450 12.1 25.4 9.1 7.8 TESTBlack MICRO 90˚ fan Black30 10815 3.6 Spray Caps 26.1100 23.5 21.5 23.8 26.450 12.3 28.3 9.6 8.4 Strip (2 x 20˚) Black 10885 100 50 3.6 10 16.3 18.4 15.9 15.6 16.4 11.1 17.8 6.4 6.7 PACk Red 15 20.0 SPrAy 22.6 20.1 CAP20.9 18.1PArt 12.6 21.9 8.1 PACkS 8.1 PEr nUmBEr14.0 QUAntIty CArton 0.06” 20 23.5 PAttErn 25.7 23.6 CoLor 26.0 24.8 27.5 9.4 9.5 25 26.0 26.7 27.2 30.5 32.4 15.0 31.8 9.8 10.1 Jet Bases hole 100 50 HOME A n t e l c o i r r i g a t i30 o n e q u 29.0 i p 360˚ m e n xt 18 •26.3 U S A c a t 29.4 a l o g Black • 2 033.5 1 0 • w w34.5 w . a10845 n t e l c15.8 o.com 35.8 10.8 10.6 2.5 360˚ x 15 hole Black 10855 100 50 10 20.0 18.5 18.6 20.1 18.3 12.8 19.6 6.6 6.8 BASE PArt PACk PACkS PEr CArton 360˚ x 12 hole Black 10865 100 50 Orange SIzE15 25.0 22.5nUmBEr 22.9 25.4 24.7 CArton 13.9 26.9 8.0 8.0 CoLor orIFICE tyPE QUAntIty (lbs) 300˚ x 10 hole 100 50 0.07” 20 29.0 25.6 27.6 Black29.6 28.210875 14.8 26.9 9.0 8.7 270° 180° 90° Strip Black 0.03” Hexagon 10905 100 50 5.6 270˚ (3 x 90˚) Black 10835 100 50 360° 360° 360° 300° 25 33.0 26.5 30.6 32.6 30.6 15.7 32.9 9.8 9.7 Brown15 hole 12 hole 0.035”10 hole Hexagon 10925 100 50 5.6 180˚ fan Black 10825 100 50 (3 x 90°) fan fan (2 x 20°) 18 hole 30 36.5 25.0 33.7 35.8 33.2 10.3 36.1 10.3 10.3 2 x 20 ft. PCF-040 Blue 0.04” Hexagon 10915 50 5.6 90˚ fan Black 100 10815 100 50 10 25.0 20.1 19.2 Black20.9 17.610885 22.2 6.8 6.8 0.05” Hexagon 100 5013.6 5.6 Strip (2 x 20˚) 10935 100 50 90° PCF-090 Green Gray 15 31.0 24.6 25.4 27.3 24.7 15.2 31.6 8.7 8.3 Red 0.06” Hexagon 100 5.6 Winged Jet Hexagon Jet 0.08” 20 35.5 25.9 10955 29.9 31.6 28.9 5016.4 37.8 9.9 9.7 Orange 0.07” Hexagon 100 5.6 180° 25 40.0 26.0 10975 33.8 36.4 31.4 5017.3 42.3 10.5 10.5 Base PCF-180 with Base 10-32 Gray 0.08” Hexagon 10945 100 5016.7 5.6 30 44.0 25.0 37.0 39.9 35.3 43.5 10.9 10.9 “Quick” Thread UNF Thread Jet Bases White 0.09” Hexagon 10985 100 50 5.6 270° PCF-270 10 35.5 19.4 19.4 23.7 16.1 14.8 23.2 7.7 7.8 Black 0.03” Winged 100 6.5 White 15 44.0 23.3 10705 26.7 30.8 23.1 5018.0PArt 30.0 10.0 9.3 BASE PACk PACkS PEr 360° PCF-360-18Brown 0.035” 20 Winged 100 tyPE 6.5 QUAntIty 0.09” 51.0 CoLor 23.8 10725 31.9 SIzE36.5 29.9 5020.7 34.5 11.3 10.5 orIFICE nUmBEr CArton 25 57.0 23.4 10715 36.5 40.4 33.3 5023.4 37.3 12.1 12.3 Blue 0.04” Winged 100 6.5 90°0.05” Strip Black 0.03” Hexagon 10905 100 360° MIST PCM-360 270°Green 180° 30 63.0 22.7 10735 37.8 43.2 35.3 5025.8 39.9 12.6 13.2 50 Winged 100 6.5 Brown 10925 6.5 100 50 (3 x 90°) fan fan0.06” (2 x 20°) Red Winged 107550.035” 100 Hexagon 50 10 4.0 3.0 Blue 0.04” Hexagon 10915 100 50 Yellow 15 4.8 2.6 Green 0.05” Hexagon 10935 100 50 0.014” 20 5.6 2.9 Red 0.06” Hexagon 10955 100 50 2.8 Winged Jet 25 Hexagon Jet 6.2 Orange 0.07” Hexagon 10975 100 50 0.07” 0.03” 30 6.8 2.6 Base with Base 10-32
6 GPH BLACK
PB-03
CArto (lbs)
SPRayS
SPRayS
Assemblies suit garden bed 0.03” 10 4.7watering 10.2 and landscaped 9.2 9.5 areas.5.9 10.9 10.4 4.4 Features Black 15 5.9 13.4 10.6 10.7 11.0 11.4 14.1 5.7 • Caps available in eight spray patterns. Specifications 0.03” 20 6.9 14.7 11.5 12.5 14.8 9.2 16.8 6.6 25 DImEnSIonS 7.8 15.6 12.4 13.7BASE wIngED 17.5 9.2 BASE 18.9 7.2 • Eight color coded bases to identify flow rate. CAP hEXAgon 30 8.6 16.4 14.0 15.5 20.0 8.8 19.9 7.7 HEIGHT 0.35” 0.8” 0.8” • Jet assemblies made to order. 10 6.1 10.8 10.2 9.7 8.5 across11.5 4.7 WIDTH 0.32” across wings9.7 0.5” flats 0.5” • Caps and bases can be ordered separately. 0.007 oz 0.02 oz 11.2 Brown WEIGHT (approx) 15 7.5 13.3 12.6 11.3 13.4 15.5 0.02 oz 6.1 0.035” UV STABILIZED 20 8.6 15.1 14.1 13.1 16.4 10.8 18.7 7.6 MATERIALS acetal acetal acetal • Available in 10-32 Hex and Winged “Quick” thread. Spray Caps
EXL SERIES FOGGER UNF Thread
Gray
“Quick” Thread
0.08”
Hexagon
10945
100
50
10705 BASE10725 hEXAgon 10715 0.8” across 10735 flats 0.5” 10755 0.02 oz
100 100 100 100 100
50 50 50 50 50
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
CArt (lbs
* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from White 0.09” Hexagon 10985 100 50 Specifications spray to mist.
acetal
acetal
“QUICK” THREAD 0.16”
10-32 UNF THREAD
•
DImEnSIonS
7YLZZ\YL WZP
HEIGHT used for overhead WIDTH WEIGHT (approx) cooling and humidifing in a 10
50-501-13
1 GPH
07-047
2.5
closed structure. 10 0
10
UV STABILIZED MATERIALS
acetal
BASE/CONNECTION TYPE: Inlet
20
30
40
+PZJOHYNL NWO
50
Antelco irrigation equipment • USA catalog • 2010 • www.antelco.com
44
te
6.5 6.5 6.5 6.5 6.5
W hi
CAP
BASE wIngED
0.35” 0.32” 0.007 oz
30 be Can
0.75 GPH
•
Re d
re
G
•
• Y • ello • Blac w B k • row
40
en
as a low flow fogger head with Specifications micro-sized droplets.
G ra y
acetal
•
UV STABILIZED MATERIALS
Flow rate BASE/CONNECTION TYPE: Inlet 0.07” EXL 500 0.03”is designed Bl n ue
FOGGER
ge
WIDTH WEIGHT (approx)
O ra n
HEIGHTthe water droplets Incorporates a vortex design, which swirls
0.03” Winged BASE wIngED Winged 0.035” 0.8” Winged mist.0.04” 0.05” across wings 0.5” Winged 0.06” Winged 0.02 oz
•
Black CAP Brown Blue 0.35” into a fine Green 0.32” Red 0.007 oz
DImEnSIonS
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6
0.8” across wings 0.5” 0.02 oz
60
BASE hEXAgon
0.8” across flats 0.5” 0.02 oz
acetal
acetal
“QUICK” THREAD 0.16”
10-32 UNF THREAD
70
80
HOME
GREEN HOUSE FOGGER & MISTER SINGLE STAKE
DOUBLE STAKE
0.5 GPH
SLIMLINE EZ CLOSE 24"
NSLA
3 GPH
PCSS-SPLUM
8 GPH
PCSS-SBROWN
PCSS-DBROWN
9 GPH 10 GPH
VIBRONET BLUE SPRINKLER
VNBS PCSS-SBLUE
PCSS-DBLUE 1
COOLNET FOGGER 8GPH/28PSI
CNET
2
24" ASSEMBLY FOR COOL/VIBRO
CNET-24
3
WHITE STABILIZER WEIGHT
CNET-W
1
2
3
MINI COMPACT ACCESSORIES The antileak device is a water pressure valve which opens and closes instantly when pressure builds up. This action prevents the micro sprinklers or misters from dripping. 1
½" ADAPTER ExL FOGGER
52-881-0
2
½" ADAP. MINI-COMPACT
52-882-0
3
ExL x ¼" BARB ADAPTER
40985
4
MINI x ¼" BARB ADAPTER
40975
5
FOG NIPPLE
52-140-0
6
FOG PLUG
52-138-0
7
ANTI-LEAK DEVICE
52-530-10
1
2
3
5
6
7
4
45
Pot Spray Stake
container with a consistent spray pattern and flow. Available in 5.6, 20,5 or 16.0 gph.
NEW
Residential, commercial Feature and Benefit Highlights • Unique positioning arrow ensures that water sprays toward the plant • Stake sets the proper height in the pot • Spray pattern works well from low to high water pressures • 160° low angle spray pattern designed for round pots to reduce overspray • Side arm shut-off with ring gives a water-tight seals preventing debris from getting into the tube
POT STAKE
2 step threaded Actual Size 5 / " Tall inlet easily accommodates Components mostSpopular p e c i f y i n g(cont.) Information polyethylene and Micro-Valve - MV25 vinyl tubing1/4" sizes
• Steep angle threads easily lock tubing onto the stake • 2 step threaded inlet easily accommodates most popular polyethylene and vinyl tubing sizes • Designed with wide ribs and steps so the stake stays where you place it
DESIGN
Additional Features 2 Step Inlet Shut-Off Arm NEW Positioning Arrow
1
4
. . 1/2" Tubing A SA700 . Glues (with re A shut-off/flow control 5.6 GPH PS-SPRAY glue) over sta valve used with 1/4" . PVC pipe. Use distribution tubing. . from 1/2" PVC . . Components (cont.) 24 1/2" polyethyl . . Components (cont.) . 1/2" Tubing Ada This flexible Misting SA700 1/4" Micro-Valve -Sprinkler MV25 1/4" Micro-Valve - MV25 Part No. Description 1/2" Valve - FC700 . . Glues (with regu A shut-off/flow control is ideal forcontrol hanging baskets A shut-off/flow control . A shut-off/flow glue) over stand valve used with 1/4" . valveand container plants. valve used with 1/4" PVC pipe. Used distribution tubing. used with 1/2" . . 1/2" Filp fromCone 1/2" PVC . . polyethylene tubing. tubing.distribution Bubblers CUATRO-FLO™ SAJ Adapter for 1/2" Hydr polyethylene SW50 . . . The CUATRO-FLO™ Bubbler is very similar to the MAXI-FLO™ bubbler, ex A 100 mesh . . 4 outlets. 1/2"There Valve FC700 are- two basic varieties — the CFL model which has a 1/2" FIPT Micro-Flo™ Jee . shut-off/flow control FLEXIBLE MISTER FVM-360 swivelAoutlets and the CF model which has a 3/4" MIPT inlet and compression steel screen . . valve used with 1/2" . Cone Filtef as1/2" a backup . 1/4" Swivel 1/2" Valve tubing.- FC700 ST250 . Tee -polyethylene SW50 into a 1/2" ni . . An adapter shut-off/flow control A 100 mesh sta . from theA1/2" . steel screen valve used with 1/2" Adapter forCF20 Turbele to.split into two . nippleSAM as a backup filte 1/4" Swivel Tee CF6 - ST250 . CF2 polyethylene CF10 tubing. 1/4" distribution tubes. . 110 gph 1 nipp 2An gphadapter from6 the gph1/2" 20into gpha 1/2" . . (Blue) (Black) (Green) ( ⁄ 2(Red) " FIPT x ⁄8" An(OPuseF nipple to split into two . . 1/4" distribution tubes. . . . up Riser Extend . CUATRO-FLO™ Bubblers . . w/elbow RA Riser Extender 5 3 Swivel 4 Swivel Tee - ST250 1 . 1 ½" FIPT x ¼" BARB . SAT 2 1/4" . Elbow -1/4" - RA25 Anw/elbow adapter th . SEL250 1/4" Swivel Elbow - Adapter for SAT A220 An adapter the 1/2" The CUATRO-FLO™ Bubbler is very similar to.the MAXI-FLO™ bubbler, except thatfrom it has An adapter that . SEL250 2 ½" FIPT x ¼" ELBOW . SEL250 screwed onto screwed onto a . An nipple toand split into 1two 4 outlets. There are two basic.varieties — the CFL model which has a 1/2"An FIPT inlet barbed adapter the 1/2" adapter from the 1/2" . from ing 1/2"Bar nipple. CFL2 CFL6 CFL10 CFL20 ing nipp ( ⁄ 2"gphFIPT x1/2" nipple tooutlets. 1/4" distribution 3 ½" FIPT x ¼" TEE ST250 2 gph 6 gph 10 20 gph is then a 1/4" distribution tubes. swivel outlets and the CF model which has a 3/4". MIPT inlet and compression nipple to 1/4" distribution tubing . tubing. . (Blue) (Black) (Red) (Green) . tubing is then . to the barbed o tubing. 4 ¾" FHT x ¼" BARB SAH . to the barbed . . . 5 ½" FIPT x MIPT x ¼" EL. RAE-250 . . 1 Shrub Adapter - SAJ Adapter for ⁄4" Ba REA . An adapter that is Elbow 1/4" Swivel . . . . directly onto a 1 SEL250 Shrub Adapter - screwed SAJ . ( ⁄21/2" " FIPT x Riser Emi 1/2" nipple. All 10-32 . Rigid Ass . An adapter from the An adapter that is The outlet elbows NFT jets and micro. CMAP 6/8/12A P . . (PC can be swiveled to . sprays are screwed CF2 CF6 CF10 CF20directly onto A 1/4" rigid rise nipple screwed a to 1/4" distribution allow the 1/4" use . directly into this adapter. 1/2"tubMIPT adap . 2 gph 6 gph 10 gph 20 gph An Outlet Plug any ing (A250) to go in . tubing. . 1/2" nipple. All 10-32 . Rigid A screwsRiser directly (Blue) (Black) (Red) (Green) ou any direction. . (OP250) can be NFT jets and micro1/2" FIPT PVC ST 250 Adapter for DUR . . CMAP 6/8/12f . Available in leng . Bubblers HYDROPORT™ . used to plug off . sprays are screwed The CUATRO-FLO™ . A 6", 1/4" Compression Adapter 1 1rigid 8" and 12".r . . . this CA250 up to 2 outlets. ( ⁄2" FIPT 4 PORT 20 GPH BUBBLER CFL20 ⁄ 4" ad B directly into adapter. Bubbler is. a four outlet, MAXI-FLO™ Bubblers . . 1/2"xMIPT . . An adapter is glued - SAJ Shrubthat Adapter . . screws direct . pressure compensating 6 PORT 0-20 GPH ADJ. BUB MFBA . into any 1/2" slip PVC An adapter that is . fitting. 1/4" tubing 1/2" FIPT PVC emitter. . HPAM 8 The Cuatro . . Water is . . . 8 PORT 0-20 GPH BUB. screwed directly onto a (A250) is attached modelin scre Available le . to the plant . . transferred . directly this adapter. SEL 250 for DUR a 1/2" nipple 1/2"to- nipple. AllAdapter 10-32 . . Compression Adapter 6", 8" and 12 . . . .distribution 6 (A250) or D . through NFTOutlet jets and 1 Dripperline Plugmicro-1 CA250 . ⁄ 2" FIPT x to ⁄the 4"barbB ( tubing. . 26 sprays are screwed OP250 . . An adapter . CFL2 CFL6 . CFL10 CFL20 that is glued . directly into this adapter. into20 anygph 1/2" slip PVC 2 gph 6 gph 10 gph . . (Blue) (Black). . (Red). . (Green) fitting. 1/4" tubing . The MAXI-FLO™ can be used for new 1 (A250)RSF is attached . . or for CUATRO-FLO™ Selection Chart retrofits.100 The ½” FIPT ⁄2" Riser Swivel F . . .. installations directly to this adapter. . inlet allows it to easily attach toCompression a ½” nipple NUMBER OF Adapter Maximum Flow . . . . RECOMMENDED CANOPY6 OUTLETS in an underground system. The MAXICA250 . . MODEL DIAMETER PER PLANT be used with distribution tubing An adapter that is glued . FLO™ can . . . into any 1/2" slip PVC . or 1¼” dripperline or a combination of both. 2 FT CF2/CFL2 . . . fitting. 1/4" tubing . 3 FT 1 . CF6/CFL6 . (A250) is attached 4 FT 2 1 . A Port to Capthis⁄2adapter. . . The outlet elbows RS " Riser Swivel ( directly . . 5 FT 2 . (PC250) can be can be swiveled to The discharge rate/outlet is CF10/CFL10 . 6 FT 3 . used to plug off 6 allow the 1/4" tubadjustable from 0-20 GPH. The . . . any unused ing (A250) to go in 7-9 FT 3 water flow of each port can CF20/CFL20 . . 10-12 FT 4 outlets. any direction. . simply be controlled with a coin. . . . RA 250 Riser Extension . . . . RAC 250 Riser Extension . . Port Cap . PC250 The Pot Spray Stake provides every container with a consistent spray pattern and flow. Available in 5.6, 20,5 or 16.0 gph.
Actual Size 5 1/4" Tall
Specifying Information
Part Number
IPS03BK IPS03BL IPS03GR SFH0332-24 SFH0332-36
Description
5.6 gph (21.2 lph) @ 20 psi (1.4 bar) 0.03" Orifice - Black 10.5 gph (39.7 lph) @ 20 psi (1.4 bar) 0.04" Orifice - Blue 16.0 gph (60.6 lph) @ 20 psi (1.4 bar) 0.05" Orifice - Green 1/8" PEVA leader tubing – 24" (61.0cm) 1/8" PEVA leader tubing – 36" (91.4cm)
IPS03BK IPS03BL IPS03GR SFH0332-24 SFH0332-36
Description
5.6 gph (21.2 lph) @ 20 psi (1.4 bar) 0.03" Orifice - Black 10.5 gph (39.7 lph) @ 20 psi (1.4 bar) 0.04" Orifice - Blue 16.0 gph (60.6 lph) @ 20 psi (1.4 bar) 0.05" Orifice - Green 1/8" PEVA leader tubing – 24" (61.0cm) 1/8" PEVA leader tubing – 36" (91.4cm)
S YSTEM
S YSTEM
24
Part Number
BUBBLERS
RISER ADAPTER
BUBBLERS
IPS03BK 5.6 gph (21.2 lph) IPS03BL 10.5 gph (39.7 lph) IPS03GR 16.0 gph (60.6 lph)
DESIGN
• Available in 3 flow rates:
S YSTEM
• Length are 24" (61.0cm); 36" (91.4cm)
Specifications
DESIGN
• Traditional shut off stake end • Made with UV resistant resin
CUATRO-FLO™ Selection Chart
MFBL2 2 gph
MFBL6 6 gph
MFBL10 10 gph
MFBL20 20 gph
(BLUE)
(BLACK)
(RED)
(GREEN)
Port Cap PC250
Distribution tubing, (A250) is simply pushed over the barb. For unused outlets, insert a port cap (PC250) over the barb.
Distribution Tubing
CANOPY DIAMETER
NUMBER OF OUTLETS PER PLANT
CF2/CFL2
2 FT
1
CF6/CFL6
3 FT 4 FT
1 2
CF10/CFL10
5 FT 6 FT
2 3
CF20/CFL20
7-9 FT 10-12 FT
3 4
The Agrifim Hydroport™ is a micro irrigation watering manifold that delivers water up to eight different plants with independently adjustable flows per outlet. It allows you to convert an underground sprinkler system to a drip system. The Hydroport™ has a 1/2" female threaded base and screws onto a standard 1/2" nipple. The discharge rate/outlet is adjustable from 0-20 GPH. The water flow of each port can simply be controlled with a coin. Each outlet has a barbed horizontal connection making it extremely simple to attach the tubing after installation. Two models are offered to suit various watering needs.
HPAM8
HPAM4
Part #
Product Description
HPAM 4
Hydroport™ 4 Port Drip Manifold
HPAM 8
Hydroport™ 8 Port Drip Manifold
All the MAXI-FLO’s™ can be used for new installations or for retrofits. The 1/2" FIPT inlet allows it to easily attach to a 1/2" nipple in an underground PVC system. The MAXI-FLO™ can be used with distribution tubing (A250) or DURA-FLO™ JR Dripperline or a combination of both.
S6
46
BUBBLERS
The MAXI-FLO™ Bubbler is a six outlet, pressure compensating emitter. Water is then transferred to the plant through distribution tubing (A250). The MAXI-FLO™ has a 1/2" female threaded base and screws onto a standard 1/2" nipple. The discharge rate/outlet remains constant regardless of how many outlets are used. Each outlet has a barbed horizontal connection making it extremely simple to attach the tubing after installation.
BUBBLERS
CUATRO-FLO BUBBLER
RECOMMENDED MODEL
The end of the tubing may be secured by a support stake (S6). The bug plug (BP250) prevents insects from entering the tubing.
ABOVE GRADE
BP250
The distribution tubing (A250) can also be buried with just the emission point and the optional bug plug above the surface.
21
24
BELOW GRADE
Part No.
MTEEMC 250 1⁄2" T (1⁄2 MC 500
ORBIT BUBBLER
MC 710
1
2 PORT ½" FIPT BUBBLER
ST250F
2
2 PORT ½" MIPT BUBBLER
ST250M
3
4 PORT ½" FIPT BUBBLER
QUAD4
4
4 PORT ½" FIPT x MIPT
QUAD4S
5
4 PORT ½" ADJ. BUBBLER
QUAD4-A
6
8 PORT ½" ADJ. BUBBLER
APOLLO-8
•Two ¼” barbed ports with threaded caps. •Filter basket included.
⁄4" F
CAP 75
3
SAH W 75
Ada
BP 250
MTEE
PHA 75
2
1
⁄4" F
3
TNPH
BUBBLERS
•Connects to ½” female threaded pipe fittings . .75 CAPcaps. TM •Two ¼” barbed with threaded 3 The CUATRO-FLO (CF) can be buried or used above ground. ports 1/4" distribution 4 •Includes Filter . tubing (A250) or DURA-FLO™ JR Dripperline is pushed directly into theto CFprevent outlets. clogged nozzles.
⁄" T
SAH. . CF2/ CFL2 CF6/ CFL6 CF10/ CFL10 CF20/CFL20 . CUATRO-FLO™ Bubblers . •Four ¼” barbed ports with threaded caps 3 4 20 psi 1.8 gph ¼”5.7 gph 7.6 gph with 13.7 threaded gph •Four barbed ports caps Cuatro-Flo (CF)The CUATRO-FLO™ Bubbler is very similar to the MAXI-FLO™ bubbler, except that it has •Easy to remove filter - Prevents clogged . 4 outlets. .75 3/4" PVC Tee •Easy to7.8 remove filter - Prevents clogged basic — the CFL model which a18.8 1/2" FIPT and barbed 40 There psi are two 2.2 gphvarieties gph 11.0 gphhas gphinletPHA (SST) outlets and the CF model which has a 3/4" MIPT inlet and compression outlets. nozzles. nozzles. . swivel60 psi 2.5 gph 8.9 gph 13.3 gph 22.2 gph . •Connects to a ½” threaded riser. •Connects to a ½” threaded riser. . 80 psi 2.5 gph 10.0 gph 15.0 gph 25.3 gph TNPH . . Tubing Length Recommendation . . CF2 CF6 CF10 CF20 Distribution 1/4" Tubing 2 gph 6 gph 10 gph 20 gph An Outlet Plug Tubing 5 6. 25' max.•Individual 25'max. 25' max. 25' max. •Flow control for all four ports - For (Blue) (Black) (Red) (Green) 3/4" Elbow Flow Control Permits (OP250) can be pre(A250) . (TT) precise flow adjustment used to plug off. cise flow adjustment for each outlet. DURA-FLO 4' min. 7'min. 9' min. 10' min. up to 2 outlets. •Four ¼” barbed ports with threaded . Part ¼” barbed threaded JR (12") 10' max.•Eight 15' max. 18' max.ports 22' with max.No. . Des caps caps. . 2' min. 3'min. 5' min. 5' min. DURA-FLO Cuatro-Flo (CF) •Easy to remove filter to prevent to remove Prevents . 3/4" Nipple . 5' max.•Easy 8' max. 9' max.filter 11'- max. JR (6") Outlet Plug OR 027 Rep clogged nozzles clogged nozzles. OP250 CFL2 CFL6 CFL10 CFL20 .. . 2 gph 6 gph 10 gph 20 gph OR 141 CUATRO-FLO™ Bubblers Rep (Blue) (Black) (Red) (Green) .. The CUATRO-FLO™ Bubbler is very similar to the MAXI-FLO™ bubbler, except that it has . CUATRO-FLO™ Selection Chart . . 4 outlets. There are two basic varieties — the CFL model which has a 1/2" FIPT inlet and barbed Part No. outlets and the CF model which has a 3/4" OF MIPT inlet and compression outlets. NUMBER . . swivelRECOMMENDED CANOPY OUTLETS . ELI Rep MODEL DIAMETER PER PLANT .. OR 027 2 FT 1 CF2/CFL2 . . . 3 FT 1 OR 141 CF6/CFL6 4 FT 2 . A Port Cap The outlet elbows CF2 CF6 CF10 CF20 REPLACE. EL CFL,MFBL ELI . . 2 2 CF10/CFL10 gph 6 gph5 FT 10 gph 20 gph (PC250) can be can be swiveledAntoOutlet Plug . Cuatro-Flo (Blue) (Black) (Red) (Green) 6 FT 3 used (OP250) can be to plug off allow the 1/4" tubRiser Swivel . REPLACE. VALVE MFBA MVI (CFL) . ELI . to plug off unused Rep any ing (A250) to goused inMVI 7-9 FT 3 Bug plugs Riser Swivel Filter CF20/CFL20 unionises the 10-12 FT 4 outlets. any direction. up to 2 outlets. PORT PLUG FOR CF BUBB. OP250 .. (RSF100) bubbler for easy . .. PORT PLUG FOR CFL BUBB. PC250 removal without The CUATRO-FLO™ can be installed in many ways, . . RISER SWIVEL FOR BUBB. RS tangling the Bubbler replacement . either at grade or below grade. Below grade applicaPort Cap MVI Port Plugs . . tubes. CFL2 CFL6 CFL10 CFL20 PC250 often used in conjunction emitter BUG PLUG BP250 parts D 90 Rep 2 gphtions are 6 gph 10 gph 20 gph with an .. (Blue) (Red) (Green) 1/2" Nipple access (Black) box (EB6). The CUATRO-FLO™ canThebeCuatro-Flo used (CFL) . .. model screws directly onto with or without the riser swivel filter (RSF100). a 1/2" nipple. 1/4" tubing. . (A250) or DURA-FLO™ D 90JR . . Dripperline is then attached Cuatro-Flo to the barbed outlets. . D 80 H Rep .26 1/4" Tubing Cuatro-Flo (CF) Bug Plug (CFL) A Port Cap The outlet elbows . . (PC250) can be can be swiveled to used to plug off allow the 1/4" tub. D 80. H any unused ing (A250) to go in outlets. any direction. . Riser . All dimensions. are no Swivel . Filter 1/2" Nipple All dimensions are 3/4" Nipple 3/4" Tee (TTT) . . For customer serv . The Cuatro-Flo (CFL) . directly ontocustomer s . 3/4" PVC Tee 3/4" PVCmodel Tee screwsFor BUBBLERS
Discharge Rates/Outlet
1/4" Tubing
TM
TM
TM
BUBBLERS
TM
BUBBLER ACCESSORIES
TM
Outlet Plug OP250
TM
CUATRO-FLO™ Selection Chart
TM
NUMBER OF OUTLETS PER PLANT
RECOMMENDED MODEL
CANOPY DIAMETER
CF2/CFL2
2 FT
CF6/CFL6
3 FT 4 FT
CF10/CFL10
5 FT 6 FT
2 3
CF20/CFL20
7-9 FT 10-12 FT
3 4
1
TM
1 2
Port Cap PC250 TM
3/4" x 3/4" x 1/2" Tee (SST)
3/4" PVC Pipe
.
26
(SST)
(SST)
a 1/2" nipple. 1/4" tubing (A250) or DURA-FLO™ JR Dripperline is then attached to the barbed outlets.
27
47
RABT 6/8 Adapter riser with
STAKES AND RIGID RISER ASTA STAKE
RIGID RISER
RABT 6/8/12/18 - Ris Adapter - a 6", 8", 12 S5R6/8/1 riser with barbed ada a 6" plast
barbed in rigid rise
ASTA-8
8"
PRR-8
12"
ASTA-12
12"
PRR-12
16"
ASTA-16
18"
PRR-18
21"
ASTA-21
18" with ½" MIPT
PRRA-18
MICRO-SPRAYS
8"
S4 - 5" W
tubing, S D S5R6/8/12 - Elbow and 1/4" a 6" plastic stake with from drif barbed inlet and a 6" rigid riser.
. 12" with 24" TUBE ASTA-250 HYDRO-POP™ Pop-up Risers S8-8" Wi . The HYDRO-POP is a pop-up sprinkler for micro-irrigation jets and sprinklers. It is designed TUBE ADAPTER ASTA-A supply tu . specifically for low volume irrigation. Hence, it can operate at very low pressures. Simply screw the head of your choice into the hexagonal riser. . Any of the following spray heads can be screwed into the top S4 - 5" Wire Stake 1 9" POPUP C/W ¼" INLET HYP250 . of the HYDRO-POP riser. tubing, DURA-FLOTM • One-piece HYDRO-FLO (TF) • DIAL-A-FLO (DAFT) 1 9" POPUP C/W ½" MIPT HYP500 . • MICRO-FLO (MF) • Two-piece HYDRO-FLO and 1/4" laser drilled • Adjustable MICRO-FLO (TFB/TFC) 2 6" CAGE STAKE AS-06H . from drifting. (MFA) • Adjustable HYDRO-FLO (VF) 3 ¼" WIRE STAKE 10/PK S250 . S14-14" the RABT . 4 ¼" x 6" CLIP STAKE S6 S8-8" Wire Stake -p vertical. . 5 ASTA HOLD DOWN STAKE S7 supply tubing from d . 6 8" WIRE STAKE S8 . 7 14" STABILIZER STAKE S14 . The HYDRO-POP is available Two inlet connections are with either a 5" or 9" riser available — a 1/2" MIPT . extension height. S7 - 7" P that screws directly into a PVC tee or with a comThe HYDRO-POP just requires . The top of the supply tu HYDRO-POP 15 psi pressure to extend it fully. pression fit that accepts extend . should Once the system is switched off, 1/4" polyethylene tubing about 1" above (A250). it immediately retracts. S14-14" Stabilizer S . grade. 1" (Cutaway drawing) the RABT6/8/12/18 a . BARB x COUPLING COUPLING THREADThexprotective housing TEE CROSS GOOF PLUG Protective (PUPT or vertical. Housing PUPS) option is used to protect SHORT LONG THREAD . THREAD the spray head when not in the extended position. The housing is HYDRO-POP . Pop-up Riser simply pushed over the top of the . HYDRO-POP . S17 - 17 . and supp PVC System . (RABT6/8 S7 - 7" Plastic Stake . ¼" BB250 CO-250A CB-1032 PRRA-1032H T-250 CR-250 P-250 supply tubing (A700) C250 . Part # Description HYP 500 9" pop-up riser with 1/2" MIPT inlet . HYP 250 9" pop-up riser with 1/4" tubing inlet . HYPJ 500 5" pop-up riser with 1/2" MIPT inlet
TM
1
2
TM
4
3
TM TM
5
TM
6
TM
TM
TM
TM
⅛” AND ¼” MICRO FITTINGS
TM
➔
➔
TM
TM
TM
RAINBIRD SELF PIERCING FITTINGS 34
CONNECTOR
ELBOW
Polyethylene System
HYPJ 250
TEE
5" pop-up riser with 1/4" tubing inlet
DRIPPER
¼"
XBF1CONN
XBF2EL
XBF3TEE
0.5 GPH
xB05PC
1 GPH
xB10PC
2 GPH
48
xB20PC
S17 - 17" Plastic Sta and supports rigid ris (RABT6/8/12/18).
TUBING FASTENER TUBE NAIL CLAMP
PIPE OD NAIL CLAMP
OD 2 HOLE CLAMP
¼"
TC-250N
-
-
3/8"
TC-455
-
-
½"
TC-700
C-005
-
¾"
-
C-007
SC-005
1"
-
C-010
SC-007
1-¼"
-
-
SC-010
1-½"
-
-
SC-012
PUNCH TOOLS 1
KEY PUNCH CAP REMOVER
KPY
2
AGRIFIM HOLE PUNCH
HP100
3
TORO METAL TIP PUNCH
T-FMP08
4
PRO PUNCH GUN
P-PUNCH
1
MICRO SPRAY HEAD ADAPTER
XBA1800
2
SELF PIERCING INSERT TOOL
XMTOOL
2
1
1
3
4
2
49
ROTOR SPRAYS 1. 2.
IMPACT ROTORS ROTORS
Sprinkler rotors operate by rotating a stream of water over the landscape instead of the mist produced by spray head sprinklers. This allows rotors to be placed farther apart than spray head sprinklers, saving you installation time and money. Rotors are designed to rotate in full or partial circles and generally do not perform with a throw radius of less than 15 feet. Sprinkler Warehouse carries a huge selection of pop-up rotors for all types of sprinkler system applications, from smaller residential landscapes to large commercial areas, such Quality Valve & as sports fields, public parks, and schools. Welcome to Quality Valve & Sprinkler -
Sprinkler
IMPACT ROTORS
Home
Contact Us
ES - QVS 3701PC 3/4" Adjustable Part or Full Circle Brass Impact Sprinkler / Single Brass Nozzle / 25 Degree
Category
rcle Metal Impact Sprinkler / Zinc Die Cast / Brass Nozzle / 27 Degree
1
POPUP IMPACT ROTOR
About Us
1
» Lawn & Garden Sprinklers TITAN
My Account
Home > 5417
GO
Search
2
Maxi-Paw and Maxi-Bird Nozzle Performance Q 2 ½" DELUXE IMPACT 2045PJ08 Pressure Nozzle Radius Flow Precip » Nozzles and Wands Category Results psi ft. gpm In/h » Garden Hoses & Hose 3 ½" ECONO IMPACT 60P 25 (1) 06 Lawn & Garden Sprinklers > Plastic Impact Sprinklers Accessories 07 LA 22 1.5 0.60 4 ½" ZINC IMPACT 90DZ » Gutter Cleaners Price: to to Search Results (1 Matches found ) Price:Low Low High High » Sprinkler Spikes & Bases 5 ½" ADJUSTABLE IMPACT 90A -" » Underground PopUp ECONOMY SERIES - QVS 1/2" Plastic Adjustable Part or Full Circle Impact ontact Us About Us My Account Search GO Sprinklers Sprinkler / 27 Deg / 9/64" Nozzle 6 ½" FULL CIRCLESearch IMPACT 15S7 12 39 5.5 0.70 ount GO » Tri-Pods with Sprinklers 35 06 37 2.0 0.28 Home > Commercial Ag Sprinklers > 3/4 Inch Plastic, Metal and Brass Sprinklers y Category: Lawn & Garden Sprinklers > Plastic Impact Sprinklers 7 ¾" ADJUSTABLE IMPACT 261SA 07 LA 23 1.9 0.69 & Garden Sprinklers > Metal Impact Sprinklers » Gauges Home Contact Us About Us My Account Search GO 1/2" Plastic Adjustable Impact Sprinkler w/ 9/64" Nozzle STANDARD SERIES QVS 3701PC 3/4" Adjustable Part or Full arden Sprinklers RIES - QVS 561PC 1/2" Brass Adjustable PartSprinkler or Full Circle » Valves Nozzle / 25 Your Price: $2.98 Circle Impact / &Single Brass Home > Lawn Garden Sprinklers > Brass Impact Sprinklers al Ag Sprinklers pact Sprinkler Degree / Zinc Category Die Cast / Brass Nozzle / 27 0 Review(s) » Weld Flanges and Fittings -" QVS Standard Series - 2701FC Full Circle Brass Sprinkler / 9/64" nd Wands » Lawn & Garden Sprinklers Add to Cart Item Id: 3701PC Mailing List Brass Nozzle / 27 Degree 5615 » Commercial Ag Sprinklers ses & Hose Part Number 129175 Subscribe to our Newsletter 45 06 38 2.3 0.31 » Nozzles and Wands 07 LA 25 2.1 0.65 GO aners » Garden Hoses & Hose Accessories Spikes & Bases Subscribe » Gutter Cleaners -" nd PopUp Unsubscribe » Sprinkler Spikes & Bases » Underground PopUp ith Sprinklers • Terms and Conditions 55 06 38 2.5 0.33 Sprinklers 07powered LA 2.3 0.71 Copyright 2011 Quality Valve & Sprinkler. All Rights Reserved. eCommerce software by 25 3DCart. » Tri-Pods with Sprinklers Email a friend Review this item Review this item » Gauges Email a friend Review this item Email a friend ges and Fittings » Valves Price -" Price » Weld Flanges and Fittings e: $14.98 Your Price: $14.98 List Share | Your Price: $39.98 Mailing List r Newsletter 60 You need to be a registered customer to order this product. Please Login . Youto need to your account or click here to Register -" to be a registered customer to order this product. Please Login Subscribe our Newsletter You need to be a registered customer to order this product. Please Login GO Nozzle Performance 3504 Series to your account or click here to Register. n to your account or click here to Register. GO Q Pressure -" Nozzle Radius Flow Precip Description 3500 Series Rotor is an easy se metal impactThe sprinkler adjustable Full or Part Circle with 27° 9/64" zincto die use cast short to mid-range ½” gearSubscribe Choose Options psi ft. gpm In/h . Unsubscribe value and convenience drive rotor, offering for residential applications. 25 129175
uality Valve &
QVS Standard Series - 2701FC Full Circle Brass Sprinkler / 9/64" Brass / 27 Degree » Nozzle Commercial Ag Sprinklers
ve Sprinkler & Quality Valve & r Sprinkler
5
3
6
7
Rotors
4
Your search for "5417" returned the following results...
RAINBIRD 3500 SERIES
3701PC 9/64" Utilizing a simple flat-bladed screwdriver, the 3500’s arc adjustment is 5/32'' Nozzle 5/32''Brass Brass Nozzle Diameter Nozzle GPM 74 Options 2.50 quick and easy. Diameter
5615
ems
73 76 79 81 83 85 86 86 86
2.70 77 3.00 80 3.20 82 Description 3.40 84 86lines, solid set, permanent set, or This sprinkler is designed for general field3.60 use on hand 3.80 88 http://www.qvsprinkler.com/search.asp?keyword=5417[02/23/11 1:59:52 PM] mechanically moved systems. 3.90 89 4.10 SKU # 139044 139051 90 139068
½" GEAR ROTOR
3504PC
½" GEAR ROTOR W/ SAM
3504PCSAM
50
Nozzle PSI 30 35 40
5/32" 11/64" 3/16" GPM Diameter GPM Diameter GPM Diameter • Terms and Conditions 3.90 84 4.60 86 5.50 88 Copyright 2011 Quality Valve & Sprinkler. All Rights Reserved. eCommerce software powered by 3DCart. 4.20 86 5.00 88 6.00 92 4.50 88 5.40 90 6.40 94
0.50 0.57 Q Square spacing based on3.0 50% diameter29 of throw 2.17 V Triangular spacing based on 50% diameter of throw 35 3.0 31 2.60 0.52 0.60 206592-08 206592-12 206592-10 45 0.75 17 0.77 0.51 0.59 2.0 27 1.93 0.51 0.59 206592-06 206592-07 3.0 31 3.00 0.60 0.69 2045A 55 0.75 18 Maxi-Paw 0.85 and 2045-PJ 0.51 0.58 Standard Angle Nozzles LA = Low Angle
rates based on Precipitation half-circle operation
Rotors
GPM 3.10 3.50 3.80 4.10 4.40 4.70 4.90 5.20 5.40
tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt t
Ma V Precip In/h 0.69 0.80 0.32 0.80 0.35 0.75 0.39 0.82 V Precip In/h
Pre bar 2.0
2.5
3.0
3.5
4.0
350
Press bar 1.7
Perfo
Perfor
See p 2.0
2.5
3.0
Rotors
www.rainbird.com/rotors
RAINBIRD 5000/5000 PLUS SERIES 5000 Series
Rotors
The Next Evolution in Rotor Performance. Rugged 5000 Series Std. Angle Rain Curtain™ Nozzle Performance 5000 Series Std. Angle Rain Curtain™ Nozzle Performance mid-range Q V Q V ¾” inlet gear-drive rotor sprinkler, offering Pressure Nozzle Radius Flowdurability, Flow Precip Rain Precip Curtain nozzle performance, flow shutPressure Nozzle Radius Flow Precip Precip bar m m3⁄h l/m mm/h mm/h psi ft. gpm In/h In/h 2.0 off and top adjustment convenience for residential, 25 1.5 33 1.12 0.20 0.23 2.0 10.8 0.36 6.0 6 7 and athletic field sites with spacing up to commercial 2.5 35 1.81 0.28 0.33 3.0 11.2 0.55 9.0 9 10 50 feet. Now available with optional in-stem pressure regulation (PRS). 8.0 36 5.90 0.88 1.01 2.5 35 SHRUB ROTOR C/W SAM 5000SPCS 2.0 36 1.81 0.27 0.31 2.5 37 2.17 0.31 0.35 4" 5004PC 3.0 11.2 0.62 10.2 9 11 POPUP ROTOR 4" 5004PCSAM ROTOR C/W SAM 6" 5006PC 8.0 13.3 1.63 27.0 19 21 POPUP ROTOR 3.0 45 4" PLUS ROTOR W/SAM 5004PLFCS 2.5 11.3 0.56 9.6 9 10 4" 5004PLPCS PLUS STAINLESS W/SAM Optional shut off for the 5000 Plus series complete with seal a matic (SAM) 3.5 1.5 10.7 0.37 6.0 7 8 55 1.5 35 1.71 0.27 0.31 2.0 37 2.30 0.32 0.37 2.5 11.3 0.60 10.2 9 11 With the Falcon 6504 rotor, you it 8.0 50 8.86 0.68 can 0.79 have 4.0 High-Speed Fal Falcon® 6504 Nozzle Performance 65 360 9.0 ARC 8 11.140 - 0.52 10 all -- uncompromising performance, superior 2.0 Q V Nozzle Radius Flow Precip Precip Pressure N and Rain distribution, reliability durability. 3.0 12.2 0.80 13.2 11 12 Pressure psi ft. gpm In/h In/h psi and Curtain™ nozzles maximize performance 30 30 coverage. wiper A multi-function seal and Performance 40 8005 Nozzle 40 tapered riser keep the stem clear of debris, 4.5 Q V Pressure Pressure Nozzle Radius Flow Precip Precip Noz 10.7 0.55 9.0 10 11 providing Precipitation rates basedlong-term on half-circle operation protection. Ideal for large 2.0 10 51 8.1 0.60 0.69 psi ft. gpm In/h In/h psi Q Square spacing based on 50% diameter of throw up to 65 feet 50 0.77 turf sites with spacing 12 53 9.7 0.66 90 V Triangular spacing based on 50% diameter of throw Performance data collected in zero wind conditions 0.93 16 1 16 55 12.6 0.80 1” PC GEAR ROTOR F4PC 18 Performance data derived from tests that conform with ASABE Standards; ASABE S398.1. 18 12 59 57 13.711.1 0.76 0.87 0.66 0.76 20 1 See page 177 for complete ASABE Test Certification Statement. 50 50 1” PC ROTOR STAINLESS F4PCSS 8.0 15.2 2.19 36.6 19 22 22 17’ 65’ 1” FC GEAR ROTOR F4FC 63 16.1 18 0.78 0.90 0.85 0.72 0.98 20 10 20 53 65 9.1 18.6 0.62 100 22 1” FC ROTOR STAINLESS F4FCSS 12 55 11.0 0.70 0.81 1 26 60 Precipitation rates based on h 1 Q Square spacing based on 5 60 60 V Triangular spacing based on 41 The Intelligent Use of Water.™ 10 0.69 0.80 53 10.1 Performance data collected in 12 0.66 0.70 0.77 8 51 59 8.2 12.0 0.61 Performance data derived from See page 177 for complete ASA 12 57 12.2 0.72 0.83 Performance 67 20.1 8005 Nozzle 20 0.86 1.00 16 22 63 71 15.723.2 0.76 0.88 1 The Rain Bird® 8005 Rotor is built rugged 0.89 1.02 Q V Pressure 18 Nozzle 63 Radius17.1 Flow 0.83 Precip 0.96 Precip Pressure Noz1 50 - 360 ARC to withstand the harsh conditions and psi psi ft. 26.7 gpm In/h In/h 26 0.96 1.11 70 73 70 50 90 70 vandalism present in commercial rotor 8 51 8.9 0.66 0.76 16 applications. It has been designed and tested 10 55 11.1 18 1 0.71 0.82 12 57 11.1 0.66 0.76 20 1 to ensure the high reliability demanded by 22 the market today. Its extensive customer 16.9 0.82 1 0.95 16 63 63 18.319.3 16.1 0.83 0.78 0.96 0.90 1 18 67 0.83 0.96 18 65 identified features and 80 foot radius make it 20 65 18.6 0.85 0.98 100 20 80 80 22 22 73 25.2 0.91 1.05 ideal for sports fields, parks and other large 26 8 turf applications. 60 80 Precipitation rates based on h Q Square spacing based on 5 Triangular spacing based on V 1" GEAR ROTOR 8005 53 18.111.8 10.1 0.88 0.69 1.01 0.80 0.75 0.87 16 10 63 55 Performance data collected in 12 59 19.6 12.0 0.89 0.66 1.03 0.77 Performance data derived from 18 65 1 1" GEAR ROTOR STAINLESS 8005-SS See page 177 for complete ASA 90 90 1 18.6 16 67 0.80 0.92
RAINBIRD FALCON® 6504 SERIES
Rotors
Rotors
RAINBIRD 8005 SERIES
Rotors
39’ - 81’
tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt tt t
tt tt tt tt tt t tt tt tt tt tt t tt tt tt tt ttt tt ttt ttt ttt tt tt tt
operation 18 69 Precipitation rates based on half-circle
67 20 71 71 22 75 V Triangular spacing based on 50% diameter of throw 73 26 79 70 10 55 Q Square spacing based on 50% diameter of throw
20.9 20.1 23.9 23.2 27.3 26.7 31.5 11.1
0.85 0.86 0.91 0.89 0.93 0.96 0.97 0.71
0.98 1.00 1.05 1.02 1.08 1.11 1.12 0.82
tt tt tt tttt ttt tttt ttt tttt tt tt tt tt tt tt tt tt tt tt tt tt t tt tt t t tt tt tt tt
Performance data collect
Performance data derived See page 177 for complet
51
8005 Cutaw
Turretnote the following: system please
Nozzle Socket
1. INSTALL AND BURY
hread the sprinkler on the pipe. Bury the sprinkler flush to grade. NOTE: Do not use pipe dope. Gear driven sprinklers and pop-up sprays hould not be installed on the same watering zone.
GEAR DRIVEN SPRINKLER SETTING INSTRUCTIONS
a. Do not exceed 30 PSI. b.
NOTE: The SuperPro with Intelligent Flow Technology™ is factory preset a 90° arc setting, and includes a pre-installed #2.5 nozzle. Always introduce air into the system gradually towith avoid
WES-TECH MINI PRO GEAR ROTOR
air pressure surges. Sudden release of compressed CHANGING A NOZZLE air into the sprinkler can cause damage. 1. REMOVING THE NOZZLE RETENTION SCREW
2. INSPECTING THE FILTER
K Can size full
Unscrew the top and lift the complete sprinkler assembly (J) out of the housing can (K). he filterWhen is located onspray the bottom heads of the sprinkler assembly do and can be easily pulled won’t the job and ut, cleaned and re-installed.
3. CHANGING THE ARC
Insert the key (B) or a small Turn clockwise to increase t NOTE: The arc set arrow in setting. When set at 360°, t
E Riser
c. Each zone should run no longer than 1 minute onkey air.(B) or a small flat blade screwdriver to remove the nozzle retention screw Use your by on turning counter-clockwise to remove and clockwise to re-install. Sprinklers turn 10 to 12 time faster on air (M) than Over spinning rotors on airyou can cause damage rotorwater. is just too much, need the Wes-Tech Mini Pro Rotor. 2. PULL UP THE RISER to the internal components.
4. OPERATING THE SHU
To shut off the water flow, in counter-clockwise. During s To open flow again, turn key
a Designed to fill in that hard to cover area between 17’ and 30’, the Wes-Tech Mini great value water Insert thePro key (A) inprovides the keyhole (C) on the top of the nozzle turret (D)and and turn the key SPRINKLER ¼ turn to insure that the key does not slip out of the keyhole when you pull it up. Firmly 3. WINTERIZATION TIPS for your landscapes. It’s simple top arc indicator ensures easy adjustment 1. INSTALL AND BURY efficiency from 40 to 360 degrees.. pull up the entire spring-loaded riser to access the nozzle socket (G). Hold the riser H Nozzle Fin ADJUSTABLE MINI ROTOR ______________________ Company Name
a. Do not exceed 30 PSI.
_______________________ Printed Name
______________________ Qty
_______________________ Signature
_______________________ Date
3. REMOVING THE NOZZLE With the nozzle retention screw (M) removed or backed out, use a pair of needle-nose pliers to pull outward on the nozzle fin (H) removing the nozzle.
b. Always introduce air into the system gradually to avoid air pressure surges. Sudden release of compressed air into the sprinkler can cause damage.
c. Each zone should run no longer than 1 minute on air. Sprinklers turn 10 to 12 time faster on air than on water. Over spinning rotors on air can cause damage to the internal components.
Please Note:
n mm/hrs
RPS® SELECT ROTOR
WES-TECH SUPER PRO n
Radius: 25' – 46'
n
Flow rate: 1.3 – 6.8 GPM
#1.0
#1.5
#2
#3
WES-TECH SUPER PRO ROTOR
WSPR
WES-TECH SHRUB ROTOR
WSPSR
RPS SELECT
The RPS Select offers pre-installed nozzle convenience with greater water efficiency.
Performance Data NOZZLE #1.0
#2.0
#3.0
#4.0
PRESSURE
RADIUS
PSI
kPa
Bars
Ft.
M.
30 35 40 45 50 30 35 40 45 50 30 35 40 45 50 30 35 40 45 50
207 241 276 310 345 207 241 276 310 345 207 241 276 310 345 207 241 276 310 345
2.1 2.4 2.8 3.1 3.4 2.1 2.4 2.8 3.1 3.4 2.1 2.4 2.8 3.1 3.4 2.1 2.4 2.8 3.1 3.4
33' 34' 37' 37' 37' 37' 38' 39' 40' 40' 37' 40' 41' 41' 43' 38' 40' 44' 45' 46'
10.1 10.4 10.4 11.3 11.3 11.3 11.6 11.9 12.2 12.2 11.3 12.2 12.2 12.5 13.1 11.6 12.2 13.4 13.7 14.0
Model Number Description 60003 -CV
FLOW RATE
GPM
1.3 1.4 1.5 1.6 1.8 2.6 2.8 3.0 3.2 3.6 3.8 4.1 4.5 4.7 4.9 5.2 5.7 6.0 6.4 6.8
52
c. Each zone should run no 10 to 12 time faster on damage to the internal c
L/M
M3/H
4.9 5.3 5.7 6.1 6.8 9.8 10.6 11.4 12.1 13.6 14.4 15.5 17.0 17.8 18.5 19.6 21.5 22.7 24.2 25.7
0.29 0.32 0.34 0.37 0.41 0.59 0.64 0.68 0.73 0.82 0.86 0.93 1.02 1.07 1.11 1.18 1.29 1.36 1.45 1.54
PRECIP in/hr PRECIP mm/hr n
s
n
s
.23 .23 .21 .22 .25 .37 .37 .38 .39 .43 .53 .49 .52 .54 .51 .69 .69 .60 .61 .62
.24 .27 .29 .26 .29 .42 .43 .44 .44 .50 .62 .57 .60 .62 .59 .80 .79 .69 .70 .71
6 6 6 6 6 9 9 10 10 11 14 13 13 14 13 18 17 15 15 16
7 7 7 7 7 11 11 11 11 13 16 14 15 16 15 20 20 17 18 18
RPS-SELECT
FLOW RATE
PRECIPITATION
GPM
L/M
M3/H n in/hr s
1.2 1.3 1.5 1.8 1.5 1.8 2.0 2.2 1.8 2.2 2.6 2.9 2.5 3.0 3.4 3.8 3.0 3.4 4.0 4.4 4.0 4.5 5.2 5.6 4.8 5.6 6.5 7.2 6.0 6.8 7.5 8.4 7.9 9.2 10.4 11.1
4,5 4,9 5,7 6,8 5,7 6,8 7,6 8,3 6,8 8,3 9,8 11,0 9,5 11,4 12,9 14,4 11,4 12,9 15,1 16,7 15,1 17,0 19,7 21,2 18,2 21,2 24,6 27,3 22,7 25,7 28,4 31,8 29,9 34,8 39,4 42,0
0,3 0.21 0.25 5 6 0,3 0.23 0.27 6 7 0,3 0.27 0.31 7 8 0,4 0.32 0.37 8 9 © K-RAIN Manufacturing Corp. 0,3 0.22 0.26 6 6 0,4 0.25 0.29 6 7 0,5 0.28 0.32 7 8 0,5 0.29 0.34 7 9 0,4 0.28 0.33 7 8 0,5 0.35 0.40 9 10 0,6 0.39 0.45 10 11 0,7 0.39 0.45 10 11 0,6 0.35 0.41 9 10 0,7 0.40 0.46 10 12 0,8 0.41 0.47 10 12 0,9 0.46 0.53 12 13 0,7 0.45 0.51 11 13 0,8 0.48 0.55 12 14 0,9 0.53 0.62 13 16 1,0 0.50 0.58 13 15 0,9 0.56 0.65 14 16 1,0 0.57 0.66 14 17 1,2 0.66 0.76 17 19 1,3 0.67 0.78 17 20 1,1 0.68 0.78 17 20 1,3 0.75 0.86 19 22 1,5 0.74 0.86 19 22 1,6 0.75 0.87 19 22 1,4 0.72 0.83 18 21 1,5 0.78 0.90 20 23 1,7 0.82 0.95 21 24 1,9 0.84 0.96 21 24 1,8 1.05 1.22 27 31 2,1 0.92 1.06 23 27 2,4 0.99 1.14 25 29 2,5 1.01 1.17 26 30
n mm/hrs
*All precipitation rates calculated for 180° operation. For the precipitation rate for a 360° sprinkler, divide by 2.
The K-Rain RPS® Select rotary sprinkler is the first gear-driven sprinkler that makes matched precipitation fast and easy, without the need to change nozzles in the field. It offers a choice of 4 selectable built-in nozzles. With a twist of a flathead screwdriver, quickly select the correct nozzle to match the arc setting of the sprinkler or landscape.
*All precipitation rates calculated for 180° operation. For the precipitation rate for a 360° sprinkler, divide by 2.
RPS SELECT ROTOR
b. Always introduce air into Sudden release of comp
PERFORMANCE DATA
of nozzles or sprinkler heads in the field. The RPS Select – 75 PSI PRESSURE n Recommended operating pressure: 25 NOZZLE RADIUS PSI kPa Bars Ft. M. K-Rain Manufacturing Corp. offers a choice of 4 selectable built-in nozzles. With a twist n Optimum nozzle performance: 40 PSI #1 30 207 2,1 USA 33 10,1 1640 Australian Avenue I Riviera Beach, FL 33404 of a screwdriver, quickly select the correct nozzle flow to 40 276 2,8 33 10,1 n Standard 4" pop-up for lawn areas match the arc setting of the sprinkler, wet or dry. No nozzle PH: 561-844-1002 I 1-800-735-724650I FAX: 345561-842-9493 3,4 33 10,1 trees to carry or lose. Fewer chances for errors. Using 60 414 4,1 33 10,1 WEB: http://www.krain.com PRESSURE RADIUS FLOW RATE PRECIPITATION n 3⁄4" female-threaded inlet NPT #1.5 30 207 2,1 36 11,0 3to achieve a combination of the four nozzles, it’s easy PSI kPa Bars Ft. M. GPM L/M M /H n in/hr s n mm/hrs n Optional drain check valve controls up to 10' 40 276 2,8 37 11,3 matched 30 207 2,1 precipitation 26 7,9 across 1.1all arc 4,2settings. 0,2 0.31 0.36 8 9 50 345 3,4 37 11,3 of elevation change 40 276 2,8 30 9,1 1.3 4,9 0,3 0.28 0.32 7 8 60 414 4,1 38 11,6 Independent research reveals that most contractors don’t 50 345 3,4 30 9,1 1.4 5,3 0,3 0.30 0.35 8 9 #2 30 207 2,1 35 10,7 change out factory-installed nozzles to match the sprinkler’s 40 276 2,8 35 10,7 60 414 4,1 30 9,1 1.6 6,1 0,4 0.34 0.40 9 10 Nozzle Arrow area of coverage. When the same 3.0 gallon nozzle is used 50 345 3,4 36 11,0 30 207 2,1 27 8,2 1.4 5,3 0,3 0.37 0.43 9 11 60 414 4,1 38 11,6 for all2,8 arcs, the28 result are dramatically Radius Control 40 276 8,5is areas 1.7that 6,4 0,4 0.42 0.48 11 Nozzle 12 Selector #2.5 30 207 2,1 37 11,3 over-watered or Select 0.38 offers 0.44 10 11 50 345 3,4 31under-watered. 9,4 1.9 The 7,2RPS 0,4 Pre40 276 2,8 38 11,6 factory-nozzle convenience with greater 60 414 4,1 30 9,1 2.1 7,9 water 0,5 efficiency. 0.45 0.52 11 13 installed 50 345 3,4 40 12,2 60 414 4,1 40 12,2 30 207 2,1 30 9,1 2.1 7,9 0,5 0.45 0.52 11 13 Arc Setting The four on-board nozzles also make the RPS Select a #3 30 207 2,1 36 11,0 40 276 2,8 31 9,4 2.4 9,1 0,5 0.48 0.56 12 14 Indicator convenient universal replacement sprinkler for other brands. 40 276 2,8 37 11,3 50 345 3,4 33 10,1 2.8 10,6 0,6 0.50 0.57 12 Lifting 14 Socket 50 345 3,4 38 11,6 60 414 4,1 31 9,4 3.1 11,7 0,7 0.62 0.72 16 18 60 414 4,1 41 12,5 30 207 2,1 32 9,8 3.0 11,4 0,7 0.56 0.65 14 16 #4 30 207 2,1 37 11,3 40 276 2,8 39 11,9 40 276 2,8 34 10,4 3.5 13,2 0,8 0.58 0.67 15 17 Arc Adjustment Slot 50 345 3,4 39 11,9 50 345 3,4 35 10,7 3.9 14,8 0,9 0.61 0.71 15 18 60 414 4,1 40 12,2 60 414 4,1 35 10,7 4.3 16,3 1,0 0.68 0.78 17 20 #5 30 207 2,1 37 11,3 Models 40 276 2,8 38 11,6 50 345 3,4 41 12,5 60003 RPS Select Rotor 60 414 4,1 43 13,1 RPS Select Rotor, shrub#6head 30 207 2,1 40 12,2 K-RAIN MANUFACTURING CORP. 60003-SH 40 276 2,8 41 12,5 60003-6INCH 1640 Australian Avenue, Riviera Beach, FL 33404 USARPS Select Rotor, 6" riser 50 345 3,4 42 12,8 Other options add to part number: PH: 561.844.1002 1.800.735.7246 FAX: 561.842.9493 60 414 4,1 44 13,4 -CV Check Valve #8 30 207 2,1 38 11,6 www.krain.com 40 276 2,8 44 13,4 50 345 3,4 45 13,7 © K-RAIN Manufacturing Corp. 11005112 REV17 60 414 4,1 46 14,0 How to Specify:
LOW ANGLE PERFORMANCE DATA NOZZLE
3. WINTERIZATION TIPS
When using an air compres note the following:
Specifications
PThe Flow K-Rain RPS Select rotary sprinkler is the first Control & sprinkler that makes matched precipitation K gear-driven Shut Off easy, without the need for cumbersomeCan fast and changing C Keyhole
© K-Rain Manufacturing Corporation AN ISO 9001 CERTIFIED COMPANY
70011110 Rev. 03
by 2.
6 7 8 9 6 7 8 9 8 10 11 11 10 12 12 13 13 14 16 15 16 17 19 20 20 22 22 22 21 23 24 24 31 27 29 30
Place your finger on the top center of the nozzle turret (D). Rotate the turret to the right until it stops and then back to the left until it stops. Notice the position of the nozzle arrow. (L) This is the “Left Start” position. The sprinkler will begin spraying from this position and rotate clockwise until it reaches the right Adjustable Stop-Return Point.
J Sprinkler Assembly
N Arc Set Adjustment
2. INSPECTING THE FIL
Unscrew the top and lift the The filter is located on the b out, cleaned and re-installe
a. Do not exceed 30 PSI.
1. FINDING THE LEFT START POSITION
The colored engraving is for demonstration purposes only.
5 6 7 8 6 6 7 7 7 9 10 10 9 10 10 12 11 12 13 13 14 14 17 17 17 19 19 19 18 20 21 21 27 23 25 26
Press the desired nozzle into the nozzle socket (G). make sure the nozzle fin (H) is on the right. Then reinstall or tighten down the nozzle retention screw (M). NOTE: The nozzle retention screw is also a break-up screw and used to adjust the distance of the spray.
SETTING THE ARC ADJUSTMENT
The rubber cover will be all black.
ON
4. INSTALLING A NOZZLE
C Key in Keyhole
L Nozzle Arrow
M Nozzle Retention Screw
Thread the sprinkler on the NOTE: Do not use pipe dop should not be installed on t
assembly with one hand.
WMPR
13005105 Rev. 16
When using an air compressor to remove water from the system please ote the following:
LOW
NOZZL #1.0
#1.5
#2
#3
TORO T5 GEAR ROTOR • 5” Pop-up • Standard
rubber cover • Optional Check-Valve • Top Adjust Arc Set • Part and Full Circle in One Sprinkler
T-5 Nozzle Performance Datal
T5 POPUP ROTOR
T5P
T5 SHRUB ROTOR
T5S
T5 12" POPUP ROTOR
T5HP
Nozzle
1.5 2.0
T-5 Low Angle Nozzle Performance Datal Nozzle
1.5LA 2.0LA 2.5LA 3.0LA
psi
Radius
GPM
25 35 45 25 35 45 25 35 45 25 35 45
25 28 29 27 30 31 29 31 32 29 33 35
0.76 0.92 1.05 1.15 1.38 2.58 1.47 1.77 2.02 2.23 2.68 3.07
Precipitation Rate (in/hr) ■ (in/hr)▲
0.23 0.23 0.24 0.30 0.30 0.32 0.34 0.35 0.38 0.51 0.47 0.48
0.27 0.26 0.28 0.35 0.34 0.37 0.39 0.41 0.44 0.59 0.55 0.56
Specifications Dimensions • Pop-up height to nozzle: 5” (127mm) • Body height: 8.8” (223.5mm) • Rubber cover diameter: 2.2” (55.9mm) • Body diameter: 2.7” (68.6mm)
T7 Series
2.5 3.0
Operating Specifications
• Inlet Size: 1” (25mm) NPT or BSP • Radius: 46-83’ (14,0-25,0m) • Operating Pressure Range: 40-100 psi (2,8 - 7,0 Bar)
TORO T7 GEAR ROTOR
9
The Toro® T7 Rotor is built rugged to withstand Features the harsh conditions and vandalism present in Additional Features Top Arc Indication municipal/government, sports fields and High • Standard Arc setting indicator top ofvalve the rotor allowsto for withstand easy The Toro® T7 Rotor isoncheck built rugged commercial rotor applications. • Threaded cap-retained riser assembly
Efficiency Nozzles
Specifications Dimensions • Pop-up height to nozzle: 5” (127mm) • Body height: 8.8” (223.5mm) • Rubber cover diameter: 2.2” (55.9mm) • Body diameter: 2.7” (68.6mm)
Operating Specifications
• Seven nozzle sizes from 7-27 GPM (26,5-102 LPM)
High Efficiency • Slip Nozzles clutch
Options Available Vandal and AbusePressure Resistance Flow
Additional Features • Standard check valve • Threaded cap-retained riser assembly • Variable reversing stator • Seven nozzle sizes from 7-27 GPM (26,5-102 LPM) • Slip clutch • Nozzle support/breakup screw • Riser pull-up feature on top of nozzle base • Adjustment/pull up tool supplied • Locking cap screw
Warranty
25 35 45 25 35 45 25 35 45 25 35
33 34 35 35 36 37 35 36 37 36 38
1.12 1.35 1.54 1.50 1.81 2.07 1.81 2.26 2.51 2.26 2.71
0.20 0.22 0.24 0.24 0.27 0.29 0.28 0.34 0.35 0.34 0.36
0.23 0.26 0.28 0.27 0.31 0.34 0.33 0.39 0.41 0.39 0.42
45
40
3.09
0.37
0.43
60
8.1
49
0.38
0.33
70
8.8
51
0.38
0.33
80
9.6
52
0.39
0.34
90
10.2
53
0.40
0.35
100
10.7
54
0.41
0.35
40
7.4
47
0.37
0.32
50
8.4
51
0.36
0.31
60
8.6
52
0.35
0.31
70
9.6
53
0.39
0.34
80
10.3
54
0.39
0.34
90
10.9
55
0.40
0.35
100
11.5
56
0.41
0.35
40
9.4
50
0.42
0.36
50
10.5
56
0.37
0.32
6.7
Warranty50 7.4 Design Solutions and 60 Safety8.1 • Five years
10.7
40
• T7PSS-0250 • T7PSS-02E 60 12*
16
70
9.4
14.2
62
0.41
0.36
15.1
63
0.42
0.37
40
13.1
52
0.54
0.47
50
14.7
59
0.47
0.41
60
15.7
61
0.47
0.41
70
17.0
63
0.48
0.41
80
18.2
65
0.48
0.41
Precip. In/hr ▲
90
19.4
66
0.50
0.43
100
20.5
68
0.49
0.43
46
0.35
0.30
40
16.0
52
0.66
0.57
48
0.36
0.32
50
18.5
59
0.59
0.51
49
0.38
0.33
60
19.7
61
0.59
0.51
70
21.0
65
0.55
0.48
0.34
80
22.5
68
0.54
0.47
0.35
90
24.0
69
0.56
0.48
0.35
100
25.3
71
0.56
0.48
40
15.7
53
0.63
0.55
50
17.9
59
0.58
0.50
60
19.8
62
0.58
0.50
70
21.6
65
0.57
0.49
80
23.2
68
0.56
0.48
90
25.0
69
0.58
0.50
100
26.4
71
0.58
0.50
40
18.6
56
0.66
0.57
50
21.3
64
0.58
0.50
60
23.7
70
0.54
0.46
70
25.5
75
0.50
0.44
Standard check 8.8 head drainage. 51 0.38 7 valve to70prevent low Small exposed diameter possibility52of injury 0.39 on 80 reduces9.6 play areas. 90 10.2 53 0.40 100
90 100
Precip. In/hr ■
• Stainlesssafely steel riser Radius ft. Smart Arc™Nozzle memory PSI returns GPMsprinkler to • Effluent indicator previously set arc if vandalized. 40
16
54
0.41
0.33
• Precipitation rate: .30 -.55 (7.6 - 14.0mm) inches Durability 40 7.4 47 0.37 0.32 per hour Heavy duty retract spring gear0.36 50 and water-lubricated 8.4 51 0.31 • Radius: 46’-83’ (14,0 - 25,0m) drive. Wiper seal reduces leaks. 60 stick-ups 8.6 and wiper 52 seal 0.35 0.31 T7 Rotor Model List • Flow rate: 6.7-30.6 GPM (25,4-116 LPM) 70 9.6 53 0.39 0.34 9 • Operating pressure range: 40-100 psi (2,8-7,0 Bar) Model 80 Description 10.3 54 0.39 0.34 • Inlet size: 1” (25mm) threaded NPT or 1” (25mm) BSP • T7P-02 90 1”10.9 (25mm) Rotor 55 0.40 0.35 • Nozzle trajectory: 25° • T7P-02E 100 1”11.5 (25mm) Rotor, 56 Effluent 0.41Indicator 0.35 • Arc adjustment: 45°-360° (unidirectional at 360°)
• Stainless steel riser • Effluent indicator
GPM
11.4 57 0.38 0.33 the 12* harsh 6070conditions and vandalism 12.4 58 0.38 0.33 wet or dry adjustments from 45°-360°. present in municipal/government, sports fields and commercial • Variable reversing stator 80 13.4rotor61applications. 0.40 0.35
Single port design ensures water is evenly distributed • Nozzle support/breakup screw 1" ADJ. ROTOR T7P across the pattern puttingontoo water • Riser without pull-up feature topmuch of nozzle base near the head, which preventsupseed washing • Adjustment/pull toolfrom supplied 1" ADJ. ROTOR STAINLESS T7PSS away. • Locking cap screw
Options Available
Radius
25 37 2.91 0.41 0.47 4.0 35 40 3.50 0.42 0.49 45 42 4.01 0.44 0.51 25 39 3.72 0.47 0.54 5.0 35 41 4.47 0.51 0.59 45 43 5.09 0.53 0.61 25 39 4.25 0.54 0.62 6.0 35 43 5.23 0.54 0.63 Pressure 45 Flow 44 Precip. Precip. 0.60 0.69 Nozzle Radius 6.01 ft. PSI GPM In/hr ■ In/hr ▲ 25 36 5.90° 0.88 1.01 0.30 8.0 40 35 6.7 43 46 7.06 0.350.74 0.85 50 48 8.03 0.36 0.32 45 7.4 50 0.62 0.71
7
• Precipitation rate: .30 -.55 (7.6 - 14.0mm) inches per hour • Radius: 46’-83’ (14,0 - 25,0m) • Flow rate: 6.7-30.6 GPM (25,4-116 LPM) • Operating pressure range: 40-100 psi (2,8-7,0 Bar) • Inlet size: 1” (25mm) threaded NPT or 1” (25mm) BSP • Nozzle trajectory: 25° & Benefits • Arc adjustment: 45°-360° (unidirectional at 360°)
Precipitation Rate (in/hr) ■ (in/hr)▲
psi
50
0.42
20
24
0.36
1”10.5 (25mm) Stainless Steel 56 0.37Rotor 0.32 1”11.4 (25mm) Stainless Steel 57 0.38Rotor, Effluent 0.33 Indicator 12.4 58 0.38 0.33
27
80
13.4
61
0.40
0.35
80
27.1
77
0.51
0.44
90
14.2
62
0.41
0.36
90
28.9
82
0.48
0.41
100
15.1
63
0.42
0.37
100
30.5
83
0.49
0.43
40
13.1
52
0.54
0.47
50
14.7
59
0.47
0.41
60
15.7
61
0.47
0.41
70
17.0
80
18.2
90 19.4 100Descrip. 20.5 T7P 40 16.0 T7P—Sports Rotor
63 0.48 0.41 Standard rubber Specifying Information—T7 Sprinkler cover 65 with arc0.48 0.41 indicator from0.50 66 0.43 T7PXX-02X 45°-360° simplifies Optional Thread 68 0.49 0.43 installation SS 02 52 0.66 0.57 and service SS—Stainless Steel Riser NPT Thread
Optional E E—Effluent
53
TORO 640 GEAR ROTOR
PGP® ULTRA / I-20 BLUE STANDARD NOZZLE PERFORMANCE DATA
MOTOR (xxx=ARC)
640 Series Performance Datal Nozzle
640-0xxx
Pressure PSI
Precip in/hr Nozzle Pressure Radius Flow Precip in/hr PSI ft. GPM 238° 192° 173° 180° Nozw psi GPM Radius 25 1.2 0.27 0.32 30 25 1.6 0.49 0.57 1.5▲ ■ 35 ▲ 31 ■ 1.4 ▲ 0.28 ■ 0.32▲ 2.0■ ▲40 ■ 27 ▲ 1.9 ■ 0.50 0.58 60 7.3 0.30 0.2645 0.40 31 0.35 1.5 0.45 0.300.39 0.35 0.56 LA 0.49 0.60 0.5228 0.622.1 0.540.52 50 0.60 ® 52 Blue 70 8.0 53 0.32 0.2755 0.4232 0.36 1.8 0.48 0.340.41 0.39 0.60 Gray 0.52 0.63 0.5530 0.662.3 0.570.49 60 0.57 40 80 8.6 54 0.33 0.2865 0.4432 0.38 1.9 0.50 0.360.43 0.410.62 0.53 0.66 0.5727 0.682.1 0.590.55 30 0.64 90° 9.2 55 0.34 0.2925 0.4533 0.39 1.4 0.51 0.250.44 0.29 0.64 2.5 0.55 0.68 0.5930 0.702.5 0.61 0.53 40 0.62 60 11.0 54 2.0 0.42 0.36 0.56 0.48 0.63 0.55 0.79 0.84 0.73 0.87 0.76 LA0.68 50 33 2.8 0.49 0.57 35 33 1.7 0.30 0.35 70 11.9 55 0.44 0.38 0.58 0.50 0.66 0.57 0.82 0.71 0.87 0.76 0.91 0.79 60 35 3.0 0.47 0.54 45 34 2.0 0.33 0.38 Gray 41 80 12.7 56 Blue 0.45 0.39 0.60 0.52 0.68 0.59 0.85 0.73 0.90° 0.78 0.94 0.81 BLUE/GREY NOZZLES BLACK SHORT RADIUS 55 34 2.1 0.35 0.40 30 29 2.8 0.64 0.74 90° 13.4 57 0.46 0.40 0.61 0.53 0.69 0.60 0.86 0.74 0.92 0.79 0.95 0.83 3.5 40 0.67 P/N 60 782900 14.0 56 0.50 0.4365 0.6632 0.57 2.3 0.75 0.430.65 0.50 0.93 NOZZLES 0.81 0.99 0.8632 1.033.1 0.890.58 LA0.82466100 50 0.64 70 14.7 57 0.50 0.4425 0.6733 0.58 1.7 0.76 0.300.66 0.35 0.95 P/N 1.01 0.8735 1.053.5 0.910.55 42 80 15.8 58 2.5 60 37 0.62 0.52 0.4535 0.6935 0.60 2.1 0.79 0.330.68 0.38 0.98 Gray 0.85 1.04 0.90° 1.093.8 0.940.53 PGP® ULTRA / I-20 BLUE STANDARD NOZZLE 90° 16.8 58 Blue 0.56 0.4845 0.7435 0.64 2.5 0.84 0.390.73 0.45 1.04 0.90° 1.11 0.9629 1.163.4 1.000.78 30 0.90 DATA 4.5 60 15.7 59 0.50 0.4355 0.6735 0.58 2.6 0.76 0.41 0.66 0.47 0.94 PERFORMANCE 0.82 1.00 0.87 1.04 0.83 40 32 3.9 0.73 0.85 70 17.0 61 0.51 0.4465 0.6835 0.59 2.9 0.77 0.460.67 0.53 0.96 Nozzle 1.02 0.88 1.06 Radius Flow Precip in/hr LA0.83 Pressure 50 35 4.4 0.920.69 0.80 43 80 18.3 63 0.51 0.4425 0.6835 0.59 2.2 0.77 0.350.67 0.40 0.96 Gray 0.83 1.03 0.89 1.07 PSI ft . GPM 60 37 4.7 0.920.66 0.76 90° 19.4 64 3.0 0.53 0.46 0.70 0.61 0.80 0.69 0.99 0.86 1.05 0.91 1.10 0.95 25 29 1.2 0.27 0.32 35 36 2.7 0.40 0.46 60 19.9 61 0.59 0.52 0.79 0.68 0.90° 0.78 1.12 1.50.97 1.19 1.03 1.24 1.07 35 31 1.4 0.28 0.32 45 38 3.0 0.40 0.46 PGP® I-20 Blue BLUE NOZZLE PGP ULTRA GRAY LOW ANGLE NOZZLE ULTRA / I-20 70 ULTRA 21.9 /63 0.61 STANDARD 0.53 0.82 0.71 0.93 0.80/ I-20 1.15 1.00 1.23 1.06 SHORT 1.28 PGP 1.11 PGP ULTRA / I-20 BLACK RADIUS NOZZLE 44 PERFORMANCE 45 31 1.5 0.30 0.35 55 39 3.4 0.43 0.50 Blue PERFORMANCE DATA PERFORMANCE 80 23.4 65 DATA0.62 0.53 0.82 0.71 0.93 0.81 1.16 1.00 1.23 DATA 1.07(18'/25') 1.28 NOZZLES 1.11 55 1.8 1.120.34 0.39 65 39 0.71 3.7 0.94 0.470.81 0.54 90° 25.0Pressure 67 0.62 0.54 0.82 1.16Radius 1.01 1.24 1.0732 Nozzle Radius Flow Precip in/hr Nozzle Pressure Precip in/hr1.29 Nozzle Flow Pressure Radius Flow Precip in/hr 65 32 1.9 0.36 0.41 25 37 3.0 0.42 0.49 PSI ft. GPM PSI ft. GPM PSI ft. GPM 4.0 25 33 1.4 0.25 0.29 35 39 3.5 0.44 0.51
360°
NOZZLE AND STATOR
640-xx
VALVE IN HEAD BODY
640-10
CHECK-O-MATIC BODY
640-20
Radius ft. 270° 29
PGP ULTRA / I-20 GRAY LOW ANGLE NOZZLE PERFORMANCE DATA
Flow GPM
PGP ULTRA/I-20 PERFORMANCE CHARTS
Considered the most durable, heavy-duty commercial sprinkler available, the Toro® 640 Series is the proven veteran for athletic fields, parks, campuses and commercial sites.
Nozzle
40 41 42 43
44
35 GPM Radius
2.0 .50 SR
29
Blue 148° 31
5.0
6.0
2.0 SR 3.0
8.0
.75 SR 4.0
13
Nozzle
1.5 Blue
2.0 Blue
2.5 Blue
3.0
Flow GPM
25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65
29 31 31 32 32 33 33 34 34 32 33 35 35 35 35 35 36 38 39 39 37 39 40 41 41 37 39 42 42 42 38 40 43 44 44 37 41 44 46 46
1.2 1.4 1.5 1.8 1.9 1.4 1.7 2.0 2.1 2.3 1.7 2.1 2.5 2.6 2.9 2.2 2.7 3.0 3.4 3.7 3.0 3.5 4.0 4.5 4.8 3.7 4.5 5.0 5.7 6.2 4.3 5.6 6.0 6.7 7.3 6.0 7.0 8.0 9.0 9.8
1
ADJ. SHRUB ROTOR W/O CV Blue
PGP00
2
4" ADJ. ROTOR W/O CV
PGP04
4.0 Blue
5.0 Blue
6.0 Blue
54
8.0 Blue
2.5 LA
1.0 SR
NOZZLES P/N 44800
BLUE/GREY 360 degrees; and a 8.0 NOZZLES P/N 782900
2.0 SR
.75 SRB N P 1.5 SR
3.0 SR
10
Precip in/hr 0.27 0.28 0.30 0.34 0.36 0.25 0.30 0.33 0.35 0.43 0.30 0.33 0.39 0.41 0.46 0.35 0.40 0.40 0.43 0.47 0.42 0.44 0.48 0.52 0.55 0.52 0.57 0.55 0.62 0.68 0.57 0.67 0.62 0.67 0.73 0.84 0.80 0.80 0.82 0.89
Gray
5.0 3.0 SR
0.32 0.32 0.35 0.39 0.41 0.29 0.35 0.38 0.40 0.50 0.35 0.38 0.45 0.47 0.53 0.40 0.46 0.46 0.50 0.54 0.49 0.51 0.56 0.60 0.63 0.60 0.66 0.63 0.72 0.78 0.66 0.78 0.72 0.77 0.84 0.97 0.93 0.92 0.95 1.03
13
6.0 LA
8.0 LA
S
PGP ULTRA / I-20 BLACK SHORT RADIUS NOZZLE PERFORMANCE DATA (18'/25') Nozzle
.50 SR Black
1.0 SR Black
2.0 SR Black
.75 SR Black
1.5
Pressure PSI
Radius ft.
Flow GPM
Precip in/hr
30 17 0.36 0.24 0.28 40 17 0.43 0.29 0.33 50 18 0.50 0.30 0.34 60 19 0.57 0.30 0.35 30 17 0.78 0.52 0.60 40 17 0.90 0.60 0.69 50 18 1.00 0.59 0.69 60 19 1.10 0.59 0.68 30 17 1.40 0.93 1.08 40 17 1.70 1.13 1.31 50 18 2.00 1.19 1.37 60 19 2.20 1.17 1.35 30 23 0.58 0.21 0.24 40 24 0.68 0.23 0.26 50 25 0.75 0.23 0.27 60 26 0.83 0.24 0.27 PGP® ULTRA / I-20 BLUE STANDARD NOZZLE 30 23 1.10 0.40 0.46 PERFORMANCE DATA 40 24 1.30 0.43 0.50 Nozzle Pressure Radius Flow Precip in/hr
65 39 3.7 0.47 0.54 PERFORMANCE DATA Nozzle Pressure Rad 25 37 3.0 0.42 0.49 B PGP ULTRA / I-20 GREEN HIGH FLOW NOZZLE PSI 35 Nozzle 39 3.5 0.44 Pressure Radius0.51 Flow Precip in/hrft PERFORMANCE DATA 30 1 45 40 4.0 0.48 0.56 Blue PSI ft. GPM B .50 Nozzle Pressure Radius Flow Precip in/hr 40 1 55 41 4.5 0.52 0.60 23 0.74 0.5450 0.61 PSI . 0.63 GPM SR rn 65 41 4.825 0.55 ft B -retu d Black0.920.5960 24 0.60 8.4 0.88 25auto 37 3.735 40 e0.52 1.06 0.61 sir 42 ed25 0.66 1.00 5.0 30 35 39 4.5 0.57 45 0.62 0.71 d 50 43 9.5 1.0 0.99 1.14 rce o f 40 1 45 5.0 0.55 0.63 if 42 Blue 60 45 10.5 55 25 1.11SR 1.000.68 1.15 0.7 Dk. Green 50 1 B 55 5.7 0.62 0.72 Red42 70 47 0.990.75 1.15 0.8 65 25 0.78 11.4 1.21 60 1 Black 65 42 6.2 0.68 40 1.13 0.55 30 1.31 23 0.66 10.9 1.00 0.61 25 38 4.325 0.57 43 2.0 50 44 12.3 1.22 1.41 6.0 40 35 40 5.635 0.67 24 0.78 1.21 0.61 0.71 SR 1.29 0.6450 60 1.49 45 0.62 45 Dk.43 Green 6.045 Blue 25 0.72 13.6 1.38 0.71 60 1 55 44 6.770 0.67 47 0.77 14.8 Black1.29 1.49 Fig. 1 55 25 1.53 0.71 30 0.8B 2 65 44 7.3 30 0.73 31 0.84 4.2 0.84 0.97 .75 Red 65 25 1.67 0.77 0.8 40 2 25 37 6.040 0.84 35 0.97 5.0 0.91 SR 0.790.5250 8.0 0.62 35 41 7.025 0.80 23 0.93 1.44 50 37 5.8 0.82 0.94 60 2 Black 45 44 8.035 0.80 24 0.92 1.73 Blue 60 39 6.3 0.800.58 0.92 0.6P Dk. Green 30 2 55 46 9.0 0.82 45 25 0.95 6.7 1.98 1.09 0.72P 1.5 0.94 0.61 40 50° 65 46 9.840 0.89 37 1.03 360 ° 55 25 2.21 0.7N 50 39 7.7 1.13 SR 0.970.6850 2 Red 65 25 2.41 60 NOZZLE 41 8.5 1.12 0.82 Black0.970.7460 PGP ULTRA / I-20 GREEN HIGH FLOW PGP ULTRA / I-20 GRAY LOW ANGLE PGP1.05 ULTRA I-20 0.52 30 70 NOZZLE 41 9.2 1.22 Dk. Green PERFORMANCE DATA 25 23 2.78 0.51 / 3.0 PERFORMANCE DATA NOZZLES 40 35 24 in/hr 3.34 0.56 0.62 Nozzle Pressure Radius Flow Precip SR 50 2 Nozzle Pressure Minimum Radius Flow Maximum Precip in/hr
4.0
5
90° 10
rc ta se
Radius ft.
2.0 LA
.50 SR
8.0 LA
Pressure PSI
Noz (P/N
1.5 SR
Recent improvements include automatic arc return; non-reversing 360, from 50 to nonstrippable, vandal resistant drive mechanism that prevents gear stripping and saves repair costs. Adding FloStop® control, easy through-the-top arc adjustment, and a standard6.0 drain-check valve all equate to a rotor that stands LA second-to-none in its class. PGP® ULTRA / I-20 BLUE STANDARD NOZZLE PERFORMANCE DATA
PGP PER Blac
4.5 LA
PGP ULTRA/I-20 6.0 GREEN HIGH FLOW PERFORMANCE CHARTS
10
2
Dk. (P/N
3.5 LA
1.0 2.5 SR
HUNTER PGP ULTRA ROTORS 1
Blue Low (P/N
1.2 0.27 0.32 30 25 1.6 30 0.49 33 17 0.57 0.36 0.24 / Gray 0.28 35 1.7Blue Standard 0.30 0.35 45 40 4.0 0.56 2.00.48 108° 127° 1.4 0.28 0.32 40 90°° 27 1.9 60° 0.50 0.5845° 40 17 0.43 0.29 0.33 45 34 2.0Low Angle 0.33 0.38 55 41 4.5 0.52 0.60 Gray Blue LA 50 28 2.1 0.52 0.60▲ 45 31 1.5 0.30 0.35 Blue ▲ ■ 65 ▲ 41 ■ 4.8 ▲ 0.55 ■ 0.63▲ ■ ▲55 ■ 34 50 18 0.50 0.30 0.34 2.1(P/N■782900) 0.35 0.40 2.31.80 0.49 0.57 55 32 1.8 0.34 0.39 Gray 60 7.3 52 0.73 0.63 0.85 0.74 1.00 0.75 60 1.20 30 1.04 1.56 2.40 2.08 60 19 0.57 0.30 0.35 Black 65 32 2.3 0.43 0.50 25 37 3.7 0.52 0.60 65 32 1.9 0.36 0.41 70 8.0 53 0.77 0.67 0.90° 0.78 1.05 0.91 30 1.27 27 1.10 2.11.90° 0.551.65 0.64 2.53 2.19 30 17 0.78 0.52 0.60 35 39 4.5 2.5 0.57 0.66 25 33 1.7 0.30 0.35 25 33 1.4 0.25 0.29 80 8.6 54 0.80 0.69 0.93 0.80 1.09 0.95 40 1.31 30 1.14 2.51.97 0.531.70 0.62 2.62 2.27 40 17 0.90 0.60 0.69 45 42 5.0 0.55 0.63 35 35 2.1 0.33 0.38 Gray Blue 2.0 LA 0.98 50 1.35 33 1.17 2.82.03 0.491.76 0.572.71 35 33 1.7 0.30 0.35 90° 9.2 55 0.82 0.71 0.96 0.83 1.13 2.34 50 18 0.59 0.69 0.72 45 2.5 2.91 0.39 0.45 60 11.0 45 54 1.02 0.88 1.19 1.68 Blue 2.1835 3.361.00 35 1.45 3.02.52 0.47 0.54 34 2.055 0.3342 1.03 0.385.7 1.40 Gray0.621.21 60 Blue 60 19 1.10 0.59 0.68 Black Green High Flow 0.78 55 0.64 0.41 0.47 70 11.9 55 55 1.06 0.92 1.24 1.75 29 1.52 2.82.62 2.2735 0.74 3.502.6Dk.3.03 34 2.165 0.3542 1.07 0.406.2 1.46 0.681.26 30 444800) 30 0.58 17 0.67 0.93 1.08 3.5 0.571.30 40 65 2.9(P/N 0.46 0.53 0.66 80 12.7 65 56 1.09 0.95 1.27 1.80 32 1.56 3.12.70 2.3435 3.601.40 3.12 32 2.325 0.4338 1.10 0.504.3 1.50 40 0.55 17 0.64 1.13 1.31 90° 13.4 25 57 1.11 0.97 1.30 1.83 35 1.59 3.52.75 2.3835 3.671.70 0.78 Gray 25 2.2 3.18 0.35 0.40 LA 0.671.32 50 33 1.735 0.3040 1.12 0.355.6 1.53 50 18 2.00 1.19 1.37 60 14.0 56 1.21 1.05 1.40 1.22 1.65 1.43 1.99 1.72 2.98 2.58 3.97 3.44 2.5 0.72 2.7 0.40 0.46 60 37 3.8 35 0.53 36 0.62 35 35 2.145 0.3343 0.386.0 Gray0.62 Blue 70 14.7 57 1.22 1.06 1.42 1.23 1.68 1.445 2.01 1.74 3.02 2.61 4.03 3.49 60 19 2.20 1.17 1.35 Black 55 44 6.7 0.67 0.77 45 38 3.0 0.40 0.46 45 35 2.5 0.39 0.45 30 29 3.4 0.78 0.90 Blue Blue PGP 80 15.8 55 58 1.27 1.10 1.48 2.09 32 1.81 3.93.13 2.7139 4.180.58 3.62 4.50.731.51 40 Short 30 0.73 23 0.85 0.21 Radius0.50 0.24 35 2.665 0.4144 1.28 0.477.3 1.74 0.84 55 3.4Black 0.43 PER 90° 16.8 65 58 1.35 1.17 1.57 2.22 35 1.92 4.43.33 2.8939 4.440.68 3.85 0.47 LA 0.841.60 50 40 0.69 24 0.80 0.23 0.26 35 2.925 0.4637 1.36 0.536.0 1.85 0.97 65 3.7(P/N 466100) 0.54 60 15.7 25 59 1.22 1.06 1.42 2.01 37 1.74 4.73.01 2.6125 0.76 4.010.75 3.47 0.23 Noz Gray0.801.45 60 35 2.235 0.3541 1.23 0.407.0 1.67 50 0.66 0.27 0.93 25 37 3.0 0.42 0.49 70 17.0 61 1.23 1.07 1.44 1.25 1.69 1.47 2.03 1.76 3.05 2.64 4.06 3.52 3.0 35 36 2.745 0.4044 0.468.0 60 26 0.83 0.24 0.27 Black 0.80 0.92 35 39 3.5 0.44 0.51 Blue 80 18.3 45 63 1.25 1.08 1.45 1.25 1.71 1.48 2.05 1.78 3.08 2.66 4.10 3.55 38 3.0 0.40 0.46 30 23 1.10 0.40 0.46 Blue 45 0.56 Blue PGP0.82 ULTRA I-20 BLACK SHORT 3.16 RADIUS NOZZLE 90° 19.4 64 1.28 1.1155 1.49 46 1.29 9.0 1.75 1.52 /0.95 2.11 1.82 2.7440 4.214.0 3.65 0.48 55 39 3.465 0.4346 0.509.8 40 24 1.30 0.43 0.50 0.89 1.03 55 41 4.5 0.52 0.60 PERFORMANCE DATA (18'/25') 60 19.9 61 1.45 1.25 1.68 1.46 1.98 1.71 2.38 2.06 3.57 3.09 4.76 4.12 65 39 3.7 0.47 0.54 50 25 BLUE 1.50 0.46 0.53 ULTRA / I-20 STANDARD NOZZLE 65 41 0.63 70 21.9 63 1.49 1.29 1.74 1.53 2.04 2.45Radius 2.76 PGP® 3.68 Nozzle 1.84 Pressure Flow3.68 Precip in/hr4.914.8 4.25 0.55 25 37 3.0 0.42 0.49 DATA4.931.60 60 26 0.46 0.53 Blac 25 3.7 4.27 0.52 0.60 80 23.4 65 1.50ULTRA 1.30 1.74 1.51 FLOW 2.05NOZZLE 1.78 PSI 2.46 ftBlack 2.13 PERFORMANCE 3.70 3.2037 PGP / I-20 GREEN HIGH . GPM 4.0 35 39 3.5 0.44 0.51 30 23 2.50 0.91 1.05 Nozzle Pressure Radius Flow Precip in/hr N 35 39 4.5 0.57 0.66 PERFORMANCE DATA 90° 25.0 45 67 1.50 1.30 1.75 1.52 2.06 1.79 30 2.48 17 2.15 0.363.72 0.24 3.22 0.28 4.95 4.29 40 4.0 0.48 0.56 Blue 40 24 1.04 PSI 42 ft. 2.70 GPM 0.90 45 5.0 0.55 0.63 Blue .50 Nozzle Pressure Radius 0.60 Flow Precip in/hr 40 17 0.43 0.29 0.33 55 41 4.5 0.52 50 25 3.00 0.92 0.27 0.72 1.07 0.32 55 42 5.7 1.2 0.62 50 18 0.50 0.3025 0.3429 65 41 4.8PSI 0.55 ft. 0.63 GPM SR 60 26 3.10 0.88 1.02 Black 1.5 Blac2 60 19 0.57 65 0.3035 42 0.3531 6.2 1.4 0.68 0.28 0.78 0.32 25 37 3.740 0.52 42 0.60 8.4 Black0.92 1.06 L 45 31 1.5 0.30 0.35 25 38 4.3 0.57 0.66 Blue ® 5.0 30 17 0.78 0.52pressure 0.60 35 39 4.550 0.57 43 0.66 9.5 Bold = Recommended 1.14 1.0 0.99 G 40 17 0.90 35 0.6055 40 0.6932 5.6 1.8 0.67 0.34 0.78 0.39 45 42 5.0 0.55 0.63 Blue 60 45 10.5 SR 1.00 1.15 Note: 65 32 1.9 0.36 0.41 Dk. Green 0.62 0.72 50 18 1.00 45 0.59 43 0.69 6.0 Blue 55 42 5.7 0.62 0.72 2 70 47 11.4 0.99 1.15 All precipitation55 rates calculated for 180° operation. 25 33 1.4 0.67 For 0.25the 0.77 0.29 Blac 60 19 1.10 0.59 44 0.68 6.7 Black 65 42 6.2 0.68 0.78 2.0 precipitation rate for a35 360° sprinkler, divide by 2. L 33 1.13 1.31 7.3 1.7 0.73 0.30 0.84 0.35 30 17 1.40 65 0.93 44 1.08 25 38 4.340 0.57 43 0.66 10.9 45 34 2.0 0.33 0.38 G Blue 1.41 6.0 40 17 1.70 25 1.13 37 1.31 6.0 0.84 0.97 35 40 5.650 0.67 44 0.78 12.3 2.0 1.22 55 34 2.1 0.35 0.40 50 18 2.00 35 1.19 1.49 45 0.62 45 0.72 13.6 SR 1.29 41 1.37 7.0 0.80 0.93 Dk.43 Green 6.060 Blue 3 65 32 2.3 0.43 0.50 60 19 2.20 45 1.17 Blac 55 44 6.770 0.67 47 0.77 14.8 Black1.29 1.49 44 1.35 8.0 0.80 0.92 Blue L 25 33 1.7 0.30 0.35 30 23 0.58 55 0.21 46 0.24 9.0 65 44 7.3 30 0.73 31 0.84 4.2 0.82 0.95 0.97 2.5 .75 0.84 35 35 2.1 0.33 0.38 G 40 24 0.68 65 0.23 46 0.26 9.8 25 37 6.040 0.84 35 0.97 5.0 P 0.89 0.39 1.03 0.45 0.79 0.91 45 35 2.5 Blue SR 8.0 50 25 0.75 0.23 0.27 P 35 41 7.0 0.80 0.93 4 50 37 5.8 0.82 0.94 55 35 2.6 0.41 0.47 60 26 0.83 0.24 0.27 Black 45 44 8.0 0.80 0.92 Blue PGP ULTRA / I-20 GREEN HIGH L 65 35 FLOW 2.9NOZZLE 0.46 0.53 BlacN 60 39 6.3 0.80 0.92 Dk. Green 30 23 1.10 0.40 0.46 55 46 9.0 0.82 0.95 PERFORMANCE DATA G 25 35 2.2 0.35 0.40 1.09 40 24 1.30 0.43 0.50 65 46 9.840 0.89 37 1.03 6.7 1.5 0.94 3.0 35 36 2.7 0.40 0.46 Nozzle Flow Precip in/hr 50 39 7.7 SR 0.97 1.13 50 25 1.50Pressure 0.46 Radius 0.53 1 45 38 3.0 0.40 0.46 Blue PSI ft . GPM PGP® ULTRA / I-20 BLUE STANDARD NOZZLE PGP ULTRA / I-20 GRA 60 26 1.60 0.46 0.53 60 NOZZLE 41 8.5 Black0.97 1.12 PGP ULTRA / I-20 GREEN HIGH FLOW BlacB 55 39 3.4 PERFORMANCE 0.43 0.50DATA PERFORMANCE PGP ULTRA / I-20 GRAY LOW ANGLE ULTRA / I-20 23 DATA 30 2.50 40 0.91 1.05 70 NOZZLE 41 9.2 PGP1.05 1.22 Dk. Green PERFORMANCE DATA 8.4 3.7 0.92 0.47 1.06 0.54 65 42 39 3.0 PERFORMANCE DATA NOZZLES Nozzle Pressure Radius Precip in/hr Nozzle Pressure Bold Rad 40 24 2.70 50 Flow 0.90 1.04 N 43 9.5 0.99 1.14 Nozzle Pressure Radius Flow Precip in/hr 25 37 3.0 0.42 0.49 SR PSI ft. GPM PSI ft 50 25 3.00 0.92 1.07 Nozzle Pressure Radius Flow Precip in/hr 4.0 60 PSI ft. GPM 35 45 39 10.5 3.5 1.00 0.44 1.15 0.51 Not Dk. Green 60 26 3.10 0.88 1.02 Black 25 29 1.2 0.27 0.32 30 2 PSI ft. GPM 2 45 47 40 11.4 4.0 0.990.48 1.15 0.56 All p Blue 70 40 42 8.4 0.92 1.06 2.0 1.5 35 31 1.4 0.28 0.32 40 2. 4.5 1.13 0.52 1.31 0.60 prec 30 25 1.6 0.49 0.57 10 B Bold Recommended pressure 40 1.555 430.3041 10.9 50 43 9.5 0.99 1.14 LA 50 2 45 31 0.35 Blue=Standard Blue/ Gray 2.0 S 65 41 4.8 0.55 0.63 40 27 1.9 0.50 0.58 60 45 10.5 1.00 1.15 50 44 12.3 1.22 1.41 60 3 55 32 1.8 0.34 0.39 Gray Low Angle Note: Dk. Green B 25 37 3.7 0.52 0.60 LA 50 28 2.1 0.52 0.60 (P/N 782900) rates calculated 65 Green 32 operation. 0.36 0.41 2 70 47 11.4 0.99 1.15 All precipitation for 180° the 60 1.9 For45 13.6 1.29 1.4930 Dk. 5.0 35 39 4.5 2.5 0.57 0.66 60 30 2.3 0.49 0.57 Gray 40 3 1.4 0.25 0.29 precipitation rate for a 360°25 sprinkler, 33 divide70 by 2. 40 43 10.9 1.13 1.31 47 14.8 1.29 1.49 2 0.63 30 27 2.1 0.55 0.64 Blue 2.0 50 3 35 33 1.745 0.3042 0.355.0 LA 0.55 13 50 44 12.3 1.22 1.41 30 31 4.2 5.7 0.84 0.62 0.97 0.72 2.5 40 30 2.5 0.53 0.62 B 60 3 45 34 2.055 0.3342 0.38 Gray Blue 60 45 13.6 1.29 1.49 Dk. Green 5.0 0.78 LA 50 33 2.8 0.49 0.57 55 34 40 2.165 350.3542 0.406.2 0.79 0.68 0.91 30 2B 70 47 14.8 1.29 1.49 3.5 0.57 0.9440 0.66 5.8 65 32 50 2.325 370.4338 0.504.3 0.82 3 60 35 3.0 0.47 0.54 Gray 2 6.0 30 31 4.2 0.84 0.97 Dk. Green High Flow 0.78 LA 0.67 0.9250 3 25 Green 33 60 1.735 390.3040 0.355.6 0.80 30 29 2.8 0.64 0.74 6.3 Dk. 6.0 (P/N 444800) 3 2.5 40 35 5.0 0.79 0.91 45 43 0.72 3.5 3S 35 35 0.386.0 Gray0.62 Blue 40 32 3.1 0.58 0.67 40 2.1 370.33 6.7 0.94 1.09 60 LA 0.67 0.77 45 35 2.555 0.3944 0.456.7 30 2 50 37 5.8 0.82 0.94 Blue BB LA 50 35 3.5 0.55 0.64 50 39 7.7 0.97 1.13 55 35 2.665 0.4144 0.477.3 4.5 0.73 40 3 0.84 60 39 6.3 0.80 0.92 Dk. Green 60 37 3.8 0.53 0.62 Gray 60 2.925 410.4637 8.5 0.97 1.12 50 LA 65 35 0.53 3 6.0 0.84 0.97 40 37 6.7 0.94 1.09 30 29 3.4 0.78 0.90 9.2 Dk. 3 8.0 Gray0.80 1.22 60 8.0 25 Green 35 70 2.235 410.3541 0.407.0 1.05 0.93 4.5 Black Short Radius 50 39 7.7 0.97 1.13 40 32 3.9 0.73 0.85 3.0 35 36 2.745 0.4044 0.468.0 4 B 0.80 0.92 LA (P/N 466100) Blue LA 50 35 4.4 0.69 0.80 60 41 8.5 0.97 1.12 45 38 3.055 0.4046 0.469.0 Blue 0.82 0.95 B PGP ULTRA / I-20 BLA 60 37 4.7 0.66 0.76 Gray 70 41 9.2 1.05 1.22 Dk. Green 1 55 39 3.4 0.43 0.50 65 46 9.8 0.89 1.03 PGP® ULTRA / I-20 MPR-25 REDPERFORMANCE NOZZLE DATA
1.5 psi
25
PGP NO
120° 13
6
G N P
8
6.0
LA 180° 8.0 LA
360°
1
terclockwise to be sure it is not blocking the nozzle socket opening. If a nozzle is already installed, it can be removed by backing out the adjustment screw and turning on the water, or by prying outward under the nozzle.
Removing Filter Screen for Cleaning
HUNTER PGJ, I25, I40 & PGP CLASSIC
3. Slip the desired nozzle into the nozzle socket. Note that the socket is angled up
The PGJ was built to bring all the efficient benefits of rotary sprinklers to applications that typically call for a spray. Its many features include a rack of easy-to-install-and-change, waterefficient nozzles, easy arc adjustment, and all the safety and durability that comes with a rubber cover.
2
1
Pressure Nozzle PSI
.75 1.0 1.5
1
SHRUB
PGJ00
2.0
2
4" ROTOR
PGJ04
3
4" ADJ. ROTOR
PGPADJ4
2.5
4
4" STAINLESS
I2504SS
5
4" ADJ. STAINLESS
I4004SS
3
3.0
5.0
15' 16' 17' 18' 19' 19' 21' 22' 22' 24' 25' 25' 27' 28' 28' 30' 31' 31' 33' 34' 34' 36' 37' 37'
Flow GPM 0.64 0.75 0.85 0.85 1.0 1.1 1.3 1.5 1.7 1.7 2.0 2.3 2.2 2.5 2.8 2.5 3.0 3.4 3.7 ™ 4.0 4.3 4.7 5.0 5.3
Radius ft.
Flow GPM
Precip in/hr
1
30 40 50 60
28' 29' 29' 30'
0.5 0.6 0.7 0.8
0.12 0.14 0.16 0.17
0.14 0.16 0.19 0.20
2
30 40 50 60
29' 30' 30' 31'
0.7 0.8 0.9 1.0
0.16 0.17 0.19 0.20
0.19 0.20 0.22 0.23
3
30 40 50 60
30' 31' 31' 32'
0.9 1.0 1.2 1.3
0.19 0.20 0.24 0.24
0.22 0.23 0.28 0.28
4
30 40 50 60
32' 33' 34' 34'
1.2 1.4 1.6 1.8
0.23 0.25 0.27 0.30
0.26 0.29 0.31 0.35
5
30 40 50 60
34' 36' 38' 38'
1.6 1.8 2.0 2.2
0.27 0.27 0.27 0.29
0.31 0.31 0.31 0.34
6
30 40 50 60
34' 36' 38' 38'
2.0 2.4 2.7 2.9
0.33 0.36 0.36 0.39
0.38 0.41 0.42 0.45
7
30 40 50 60
34' 38' 40' 40'
2.6 3.0 3.4 3.7
0.43 0.40 0.41 0.45
0.50 0.46 0.47 0.51
8
30 40 50 60
37' 39' 41' 42'
3.2 3.7 3.9 4.6
0.45 0.47 0.45 0.50
0.52 0.54 0.52 0.58
9
30 40 50 60
38' 41' 44' 45'
3.6 4.3 5.2 5.5
0.48 0.49 0.52 0.52
0.55 0.57 0.60 0.60
10
30 40 50 60
44' 46' 47' 49'
6.0 6.8 7.6 8.2
0.60 0.62 0.66 0.66
0.69 0.71 0.76 0.76
11
30 40 50 60
46' 48' 50' 51'
8.0 8.9 9.8 10.5
0.73 0.74 0.75 0.78
0.84 0.86 0.87 0.90
12
30 40 50 60
46' 48' 50' 52'
10.5 11.9 12.7 14.1
0.96 0.99 0.98 1.00
1.10 1.15 1.13 1.16
Nozzle
4
1.5 2.0 2.5 3.0 4.0 5.0
5
6.0 8.0
Pressure PSI 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65 25 35 45 55 65
Nozzle
1.7 2.0 2.5
172 200 248
Radius Flow m m3/hr l/min 6.4 6.7 7.0
0.30 0.32 0.35
4.9 5.3 5.9
Precip mm/hr 14 14 14
17 16 17
1.5
Pressure Bars kPa 1.7 2.0 2.5 3.0 3.5 4.0 4.5
172 200 248 303 352 400 448
.75 1.0 1.5 2.0 2.5 3.0 4.0 5.0
2.1 206 4.6 0.15 2.8 275 4.9 0.17 3.4 344 5.2 0.19 2.1 206 5.5 0.19 2.8 275 5.8 0.23 3.4 344 5.8 0.25 2.1 206 6.4 0.30 2.8 275 6.7 0.34 3.4 344 6.7 0.39 2.1 206 7.3 0.39 2.8 275 7.6 0.45 3.4 344 7.6 0.52 2.1 206 8.2 0.50 2.8 275 8.5 0.57 3.4 344 8.5 0.64 2.1 206 9.1 0.57 2.8 275 9.4 0.68 3.4 344 9.4 0.77 2.1 206 10.1 0.84 PG 2.8 275 10.4 0.91 3.4 Gear-Driven 344 10.4 0.98 S 2.1 206 11.0 1.07 2.8 275 11.3 1.14 3.4 344 11.3 1.20
PGP GrayNote: Low Angle Nozzle All precipitation rates calculated for 180 PerformanceFor Data P/N 233200 the precipitation rate of a 360 degre
For more information on precipitation ra
5 6 7 8
40' 41' 41' 37' 39' 42' 42' 42' 38' 40' 43' 44' 44' 37' 41' 44' 46' 46'
4.0 4.5 4.8 3.7 4.5 5.0 5.7 6.2 4.3 5.6 6.0 6.7 7.3 6.0 7.0 8.0 9.0 9.8
0.48 0.52 0.55 0.52 0.57 0.55 0.62 0.68 0.57 0.67 0.62 0.67 0.73 0.84 0.80 0.80 0.82 0.89
0.56 0.60 0.63 0.60 0.66 0.63 0.72 0.78 0.66 0.78 0.72 0.77 0.84 0.97 0.93 0.92 0.95 1.03
Radius Flow m m3/hr l/min 8.8 9.1 9.4 9.8 9.8 9.8 9.4
0.27 0.29 0.32 0.35 0.38 0.41 0.43
4.5 4.8 5.4 5.9 6.4 6.8 7.2
9
30 40 50 60
33' 37' 40' 42'
4.3 5.0 5.6 6.1
0.76 0.70 0.67 0.67
10
40 50 60 70
38' 40' 42' 44'
6.5 7.3 8.0 8.6
0.87 0.88 0.87 0.86
P
PGP Red Standard Nozzle Performance Data P/N 130900 Nozzle
8 8 8 9 9 10 11
Pressure Bars kPa
Radius Flow m m3/hr l/min
Prec
1
1.7 2.0 2.5 3.0 3.5 4.0 4.5
172 200 248 303 352 400 448
8.2 8.5 8.5 8.8 8.8 9.1 9.1
0.10 0.11 0.13 0.15 0.16 0.18 0.19
1.7 1.8 2.1 2.4 2.7 2.9 3.2
3 3 4 4 4 4 5
2
1.7 2.0 2.5 3.0 3.5 4.0 4.5
172 200 248 303 352 400 448
8.5 8.8 8.8 9.1 9.1 9.4 9.4
0.14 0.16 0.17 0.19 0.21 0.22 0.23
2.4 2.6 2.9 3.2 3.5 3.7 3.9
4 4 4 5 5 5 5
3
1.7 2.0 2.5 3.0 3.5 4.0 4.5
172 200 248 303 352 400 448
8.8 9.1 9.1 9.4 9.4 9.8 9.8
0.18 0.20 0.22 0.25 0.27 0.29 0.31
3.0 3.3 3.7 4.1 4.5 4.8 5.1
5 5 5 6 6 6 6
4
1.7 2.0 2.5 3.0 3.5 4.0 4.5
172 200 248 303 352 400 448
9.4 9.8 9.8 10.1 10.1 10.4 10.4
0.24 0.27 0.30 0.34 0.37 0.40 0.43
4.1 4.4 5.0 5.6 6.2 6.6 7.1
5 6 6 7 7 7 8
1.7
172
10.1
0.33
5.5
7
Precip mm/hr 7 7 7 7 8 9 10
Blank nozzle plug for turning off sele sprinklers during repairs, maintenanc
Note: All precipitation rates calculated for 180 degree For the precipitation rate for a 360 degree sprinkler, di
“Looks good, works hard. Commit to Hunter’s Blue Nozzles for choice coverage with no more over- or underwatering and an appearance that’s received higher customer satisfaction ratings. Buy Blue and go for the gold.”
PGP Gray Low Angle Nozzle Performance Data P/N 233200 Nozzle
0.63 0.65 0.65 0.58 0.62 0.68 0.66 0.69 0.78 0.66 0.71 0.82 0.67 0.71 0.79 0.62 0.69 0.79 0.76 0.77 0.83 0.81 0.81 0.86
4
PGP Blue Standard Nozzle Performance Data P/N 130900
Pressure Bars kPa
0.55 0.56 0.57 0.51 0.53 0.59 0.57 0.60 0.68 0.57 0.62 0.71 0.58 0.61 0.69 0.53 0.60 0.68 0.65 0.67 0.72 0.70 0.70 0.75
Radius Fl m m3/hr
Pressure Radius Flow Prec Radius Flow Precip in/hr Data test results in zero wind. Adjust for local conditions. Radius may be reduced PSI up to 25% withft. adjustmentGPM screw (this may alte Nozzle ft. represented GPM Optimum performance is shown in bold type. 29' 1.2 0.27 0.32 30 22' 1.4 0.56 For on0.28 Hunter Sprinklers, 31'warranty information 1.4 0.32 consult factory. 40 24' 1.7 0.57 31' 1.5 0.30 0.35 50 26' 1.8 0.51 32' 1.8 0.34 0.39 60 28' 2.0 0.49 32' 1.9 0.36 0.41 30 25' 1.6 0.49 33' 1.4 0.25 0.29 40 27' 1.9 0.50 33' 1.7 0.30 0.35 50 28' 2.1 0.52 34' 2.0 0.33 0.38 60 30' 2.3 0.49 34' 2.1 0.35 0.40 30 27' 2.1 0.55 32' 2.3 0.43 0.50 40 30' 2.5 0.53 33' 1.7 0.30 0.35 33' 2.8 0.49 50 35' 2.1 0.33 0.38 60 35' 3.0 0.47 35' 2.5 0.39 0.45 35' 2.6 0.41 0.47 30 29' 2.8 0.64 35' 2.9 0.46 0.53 40 32' 3.1 0.58 35' 2.2 0.35 0.40 50 35' 3.5 0.55 36' 2.7 0.40 0.46 60 37' 3.8 0.53 38' 3.0 0.40 0.46 30 31' 3.4 0.68 39' 3.4 0.43 0.50 40 34' 3.9 0.65 39' 3.7 0.47 0.54 37' 4.4 0.62 50 37' 3.0 0.42 0.49 60 38' 4.7 0.63 39' 3.5 0.44 0.51
Note: All precipitation rates calculated for 180 degree operation. For the precipitation rate for a 360 degree sprinkler, divide by 2.
Note: All precipitation rates calculated for 180 degree operation. For the precipitation rate for a 360 degree sprinkler, divide by 2.
Pressure Nozzle Bars kPa
Precip in/hr
PGP Blue Standard Nozzle Note: All precipitation rates calculated for 180 degree operation. Performance Data P/N For665300 the precipitation rate for a 360 degree sprinkler, divide by 2.
Pressure PSI
Nozzle
30 40 50 30 40 50 30 40 50 30 40 50 30 40 50 30 40 50 30 40 50 30 40 50
Radius ft.
4.0 Professional series
PGP Red Standard Nozzle Performance Data P/N 130900
PGJ Nozzle Performance Data
PGJ Nozzle Performance Data
55
POP UP SPRAYS 1. 2.
SPRAYS NOZZLES
Irrigate your lawn the professional way with sprinklers that pop up out of the ground when water flow is acknowledged. Pop up sprinklers will make your garden lawn lush and full of life without the equipment being permanently on display.
HUNTER SPRAY HEADS The industry’s most rugged wiper seal is co-molded from two types of chemical and chlorine-resistant materials. This pressureactivated, multifunction wiper seal reduces flow-by, operates at low pressures, and allows more sprinkler heads to be installed on the same zone. Its innovative design prevents debris from entering the seal when the riser is retracted, reducing riser stick-ups. 1
2" PRO SPRAY
PROS02
2
3" PRO SPRAY
PROS03
3
4" PRO SPRAY
PROS04
4
6" PRO SPRAY
PROS06NSI
5
12" PRO SPRAY
PROS12
All models include a user-friendly pull-ring flush cap to keep debris and clogging to a minimum. The Hunter Pro-Spray sprinkler head is compatible with all industry standard female nozzles offering a high degree of flexibility.
1
2
3
5
4
THE FUTURE OF IRRIGATION
HYDRO RAIN HRS100 & 200 SPRAY HEAD
HRS 200
In a world of heavy, abusive lawn equipment, only the tough survive. That’s why HydroRain® set out to create the most rugged, durable spray head on the market—a head with a “bring it on” attitude and a body that can take whatever you throw at it. The HRS 200 is that spray head.
In a world of heavy, abusive lawn equipment, only the tough
4"
BODY SLIMsurvive. That’s why Hydro-Rain HRS100-04 set out to create the most
4"
BODY
6"
BODY
12"
BODY
4"
BODY PR/CV
HRS200-04-PC
4"
BODY BLU-LOCK
HRS200-04-FB
®
rugged, durable spray head on the market—a head with a “bring it on” attitude and a body that can take whatever you throw at it. The HRS 200 is that spray head.
HRS200-04 HRS200-06
Hands down, it’s the heaviest-duty product of its kind. The facts speak for themselves: the wide cap is made with almost 50% more material than the nearest competitor; the wiper seal is the industry’s largest; the body is made of ultra-strong ABS 709…and that’s just the beginning. Top to bottom, inside and out, this head sets a new standard for long-lasting reliability under even the harshest conditions and most punishing treatment—that means fewer call-backs and fewer replacements.
HRS200-12
And now the HRS 200 lineup is greener than ever. The new PRHS stem—a pressure regulator and check-valve— dramatically reduces water waste and increases efficiency by preventing nozzle misting and overspray, and eliminating low-head drain at the end of each watering cycle.
SkU
DESCRIPTION
HRS-200-04-FC
03012
4" Commercial Spray Head w/ Flush Cap
HRS-200-04-FB
03015
4" Commercial Spray Head w/ Flush Cap & ½ BL Ell
BUILT FOR SPEED ADVANTAGES
HRS-200-04-PC
03001
4" Commercial Spray Head w/ Flush Cap & PRHS
• Blu-Lock® Enabled—Factory-installed Blu-Lock® elbows nozzles, available on select models, are ready to install on Blu-Lock® swing pipe out of the box.
HRS-200-04-PB
03004
4" Commercial Spray Head w/ Flush Cap & PRHS & BL Ell
HRS-200-06-FC
03013
6" Commercial Spray Head w/ Flush Cap
HRS-200-12-FC
03014
12" Commercial Spray Head w/ Flush Cap
• Cat-track Grip Body Cap—Unique rib design and contour of cap promotes superior ergonomics for faster installation and quicker maintenance.
56
MODELS
• Pre-Installed Hydro-Rain® Flush Cap—Pull-tab “quick rip” design makes nozzle installation trouble-free. Just pull the tab, rip it off the stem and install the filter and nozzle. BUILT FOR GREEN ADVANTAGES
HOW TO SPECIFY HRS 200 04 FC
MODEL
SIzE
OPT. FEATURES
HRS 200
4"
Flush Cap
usted for over 30 years, 1800 Series Spray Dimensions/Models to be installed on the same valve. eads have provided unmatched durability, • ½” (15/21) NPT female threaded inlet • Designed for use with all Rain Bird plastic liability, and performance. • Models and height: nozzles – Rotary Nozzles, uperior components and features make thespray head 1802: 4” (10 cm) body height; VAN and XPCN 800 Series Spray Head the spray head of U-Series,2”MPR, pop-up height (5 cm) Series. controlled at pop-down hoice for a wide variety of applications. • Precision 1803: 47⁄8” (12 flush cm) body height; clears debris fromheight unit, assuring 3” pop-up (7.6 cm) positive stem retraction in all soil types. 1804: 6” (15 cm) body height; eatures • Strong stainless spring provides 4” pop-upsteel height (10 cm) o-molded, pressure-activated, multi-func- reliable1806: 9 3⁄8” (24 cm) body height; stem retraction. onal wiper seal assures positive seal without pop-up height (15models cm) allows • Ratchet6” mechanism on all xcess “flow-by” which enables more heads easy nozzle 1812:pattern 16” (40 alignment cm) body height; without o be installed on the same valve. tools. 12” pop-up height (30 cm) • Exposed surface diameter: ⁄4” (5.7 cm) ™ flush21plug 1800 Pop-Top Designed for use with all Rain Bird plastic• Pre-installed
1812: 16” (40 cm) body height; 12” pop-up height (30 cm) • Exposed surface diameter: 21⁄4” (5.7 cm)
How To Specify
RAIN BIRD 1800™ SERIES SPRAY HEAD
spray head nozzles – Rotary Nozzles, blocks debris from entering after flushing. U-Series, MPR, VAN and XPCN Series. Allows for easy nozzle installation. Precision controlled flush at pop-down • Constructed of time-proven UV-resistant clears debris from unit, assuring positive plastic and corrosion resistant stainless How To Specify stem retraction in all soil types. steel parts, assuring long product life. Strong stainless steel spring provides • All sprinkler components removable 1804 - SAM - are PRS - P45 reliable stem retraction. from the top without special tools, Ratchet mechanism on all models allows Optional Feature providing for quick and easy flushing and easy nozzle pattern alignment without PRS: 30psi (2.1 bar) in-stem maintenance of the sprinkler. tools. pressure regulation on 1806, 1806PRS, Pre-installed 1800 Pop-Top™ flush plug • Side inlets featured Optional P45: 45psi (3.1 bar) in-stem Feature modelspressure only. regulation blocks debris from entering after flushing. 1812, and 1812PRS SAM: • Five-year trade warranty. Allows for easy nozzle installation. Seal-A-Matic™ Constructed of time-proven UV-resistant check valve Model plastic and corrosion resistant stainless Operating Range 1804: 4” (10.2 cm) pop-up height steel parts, assuring long product life. 2.5 SAM to 24 feetincluded (0.8 to 7.3 feature with P45m) models All sprinkler components are removable• Spacing:Note: • Pressure: 15 to 70 psi (1.0 to 4.8 bar) from the top without special tools, providing for quick and easy flushing and How To Specify maintenance of the sprinkler. Specifications Side inlets featured on 1806, 1806PRS, • Flow-by:1804 0 at 8 psi (0.6 bar) or greater; - SAM-P45 - R13-18Q 1812, and 1812PRS models only. 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise Five-year trade warranty.
POPUP BODY
Operating Range
2"
1802
4"
1804
6"
1806
Spacing: 2.5 to 24 feet (0.8 to 7.3 m) Pressure: 15 to 70 psi (1.0 to 4.8 bar)
pecifications
Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise
12"
Optional Feature SAM: Seal-A-Matic™ check valve
1812
P45: 45psi (3.1 bar) in-stem pressure regulation
Nozzle Rotary Nozzle Radius Range 13-18’ (4.0 – 5.5,m) 17-24’ (5.2 – 7.3m) Pattern F: Full (360°) TQ: Three Quarter (270°) TT: Two Third (240°) H: Half (180°) T: Third (120°) Q: Quarter (90°)
1804 - SAM - PRS - P45
PRS
Optional Feature PRS: 30psi (2.1 bar) in-stem pressure regulation
Optional P45: 45psi (3.1 bar) in-stem Feature pressure regulation SAM: Seal-A-Matic™ check valve
POPUP BODY SAM
Model 1804: 4” (10.2 cm) pop-up height
Note: SAM feature included with P45 models
PRS
POPUP BODY SAM + PRS SAM
How To Specify
SAM MODEL W/Built-in Seal-A-Matic™ (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site.
1804 - SAM-P45 - R13-18Q Nozzle Rotary Nozzle Radius Range
Optional Feature SAM: Seal-A-Matic™ check valve P45: 45psi (3.1 bar) in-stem pressure regulation
13-18’ (4.0 – 5.5,m) SAM 17-24’ (5.2 – 7.3m)
Pattern F: Full (360°) TQ: Three Quarter (270°) TT: Two Third (240°) H: Half (180°) T: Third (120°) Q: Quarter (90°)
1804SAM
Model 1804: 4” (10.2 cm) pop-up height
SAM-PRS
Note: Specify sprinkler bodies and nozzles separately.
SAM-PRS
1804SAMPRS
1806SAM
1806SAMPRS
1812SAM
1812SAMPRS
SAM-PRS-P45
PRS MODEL - Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)
Model 1804: 4” (10.2 cm) pop-up height Note: Specify sprinkler bodies and nozzles separately.
SAM-PRS-P45
RAIN BIRD 1800™ ACCESSORIES 1
6" ExTENSION
1800EXT
2
½" POPUP ADAPTER
PA80
3
MICRO ADAPTER
xBA1800
1
2
3
TORO 570 CLASSIC SPRAY HEAD POPUP BODY
POPUP BODY SIDE INLET
2"
570Z-2P
3"
570Z-3P
4"
570Z-4P
6"
570Z-6P
570Z-6PSI
12"
570Z-12P
570Z-12PSI
No Flushing on Pop-Up! Starting up a system is a critical time when water waste can occur – but not on a 570Z Series spray head. With a pressure-activated wiper seal that flushes only upon retraction, flow-by is eliminated on pop-up reducing water waste and allowing more heads per valve. This zeroflush seal is what makes the 570Z Series a spray head for those serious about effective water management.
SHRUB ADAPTER
570S
57
TORO 570 X-FLOW WITH CHECK VALVE X-Flow Technology Shuts Off Water Waste With the 570ZXF, Toro takes water management another step further. A missing or damaged spray head nozzle can let excessive amounts of water escape per minute. The patented X-Flow technology is a shut-off device built right into the sprinkler. When accidents or vandalism occur the 570ZXF is there to back you up. SHRUB ADAPTER x-FLOW
570Z-SHRUBxF
4"
POPUP BODY x-FLOW
570Z-4PxF
4"
POPUP BODY x-FLOW COM
570Z-4PxFCOM
6"
POPUP BODY x-FLOW COM
570Z-6PxFCOM
12"
POPUP BODY x-FLOW COM
570Z-12PxFCOM
TORO 570 X-FLOW PR + CHECK Built-in Pressure Regulation Adds Reliability The built-in pressure regulator on the 570ZPRX maintains constant pressure working well in situations where water pressures are variable and misting or fogging may be a problem. From first to last head, the 570ZPRX provides steady pressure in situations that require additional control. This is not an add-on or regulating disc, rather true pressure regulation where you need it most – built right in. SHRUB ADAPT. PRESSURE REG.
570Z-SHRUBPRx
4"
POPUP BODY
570Z-4PPRxCOM
6"
POPUP BODY
570Z-6PPRxCOM
12"
POPUP BODY
570Z-12PPRxCOM
IRRITROL I-PRO SERIES SPRAY HEADS Irritrol’s new I-PRO Series spray heads combine a pressure-activated wiper seal and advanced formula lubricant that virtually eliminates troublesome stick ups. Pre-installed check valve prevents low-head drainage, eliminating flood or erosion damage by keeping water in lateral pipes in elevation changes up to 13’. POPUP SPRAY
POPUP WITH CHECKVALVE
POPUP WITH CHECKVALVE + PR
3"
I-PRO300
4"
I-PRO400-CV
4"
I-PRO400-PR-CV
4"
I-PRO400
6"
I-PPRO600-CV
6"
I-PRO600-PR-CV
6"
I-PPRO600
12"
I-PRO1200-SI-CV
12" SIDE INLET
I-PRO1200-SI-PR-CV
6" SIDE INLET
I-PRO600-SI
UNIVERSAL
IP-CV
12" SIDE INLET
I-PRO1200-SI
58
17’ - 24’
45°- 270°
RBR-VAN-14-270
RBR-VAN-18-270
RBR-VAN-24-270
360°
-
RBR-VAN-18-360 RBR-VAN-24-360
5' x 15'
Left Corner Strip
RBR-VAN-LCS
Right Corner Strip
RBR-VAN-RCS
Side Corner Strip
RBR-VAN-SST
8 Series MPR 10° Trajectory Nozzle
Spray Nozzles
Pressure Radius psi ft. 8F 20 6 25 7 30 8 8H 15 5 Nozzles Spray MPR Nozzles 30 8 8Q 15 5 20 6 8 Series MPR 30 8
RAIN BIRD 1800™ SERIES NOZZLES MPR Nozzles
Radius ft. 6 7 8 5 8 5 6 8
Radius ft. 7 8 10 7 8 9 10 7 8 9 10
Radius ft.
Flow gpm 0.86 0.96 1.05 0.37 90° 180° 0.52 360° 0.18 0.21 0.26
Flow gpm 1.16 1.30 1.58 0.58 0.65 0.72 90° 0.79 0.29 180° 0.33 0.36 360° 0.39
Flow gpm
5' NOZZLE V
Q Precip Precip In/h In/h 2.30 2.66 1.89 2.18 1.58 1.82 2.85RB-5Q 3.29 RB-5H 1.56 1.81 2.77RB-5F 3.20 2.25 2.59 1.56 1.81
Q V Precip 10' Precip In/h NOZZLE In/h 2.28 2.63 1.96 2.26 1.52 1.75 2.28 2.63 1.96 2.26 1.71RB-10Q 1.98 1.52 1.75 2.28RB-10H 2.63 1.96 2.26 1.71RB-10F 1.98 1.52 1.75
Q Precip In/h
V Precip In/h
8' NOZZLE 5 Series MPR
5 Series MPR Trajectory 8 Series MPR 5° Nozzle 10° Trajectory 5F Nozzle 8F 5H 8H 5Q 8Q
Pressure psi 15 Pressure psi 20 25 30 15 30 15 20 15 Series MPR 30
Radius ft. 3 Radius ft. 6 7 8 5 8 5 6 8
Flow gpm 0.29 Flow gpm 0.86 0.96 1.05 0.37 0.52 0.18 0.21 0.26
Q Precip In/h Q 3.10 Precip In/h 2.30 1.89 1.58 2.85 1.56 2.77 2.25 1.56
V Precip In/h V 3.58 Precip In/h 2.66 2.18 1.82 3.29 1.81 3.20 2.59 1.81
30° Trajectory 10 Series MPR Pressure Nozzle psi 15FTrajectory 15° 15 20 Nozzle Pressure psi 30 10F 15 15H 15 20 20 30 30 10H 15 15Q 15 20 20 25 30 30 10Q 15 20 25 30
Radius ft. 11 12 Radius ft. 715 811 12 10 715 811 912 10 715 8 9 10
Flow gpm 2.60 3.00 Flow gpm 3.70 1.16 1.30 1.50 1.58 1.85 0.58 0.65 0.65 0.75 0.72 0.79 0.92 0.29 0.33 0.36 0.39
Q Precip In/h 2.07 Q 2.01 Precip In/h 1.58 2.28 2.07 1.96 2.01 1.52 1.58 2.28 2.07 1.96 2.01 1.71 1.52 1.58 2.28 1.96 1.71 1.52
V Precip In/h 2.39 V 2.32 Precip In/h 1.83 2.63 2.39 2.26 2.32 1.75 1.83 2.63 2.39 2.26 2.32 1.98 1.75 1.83 2.63 2.26 1.98 1.75
12 Series MPR 30° Trajectory Nozzle 12F
Pressure psi
Radius ft.
Flow gpm
Q Precip In/h
V Precip In/h
5° Trajectory Nozzle
Pressure psi 15 RB-8Q RB-8H RB-8F
5F 90° 180° 5H 360° 5Q
Spray Nozzles
ure
13’ - 18’
Spray Nozzles
ure
8’ - 14’
Spray Nozzles
ure
R-VAN Series Rotary Nozzles
12' NOZZLE
15 Series MPR 30° Trajectory Nozzle 15F
90° 15H 180°
360° 15Q
Pressure psi 15 20 30 RB-12Q 15 20 RB-12H 30 RB-12F 15 20 30
Trajectory 10° 10 Series MPR Nozzle 15° Trajectory 8F Radius Flow Nozzle ft. gpm 310F 0.29 8H 10H 8Q 10Q 10 Series MPR
Pressure Radius psi V ft. Q Precip Precip Pressure Radius 20 6 In/h In/h psi ft. 25 3.10 3.58 15 77 30 20 88 15 5 30 10 15 7 20 8 30 25 95 15 30 10 20 6 15 7 20 88 30 25 9 30 10
12 Series MPR 15° Trajectory Nozzle Pressure Radius 30° Trajectory Q V ft. psi Nozzle Flow Pressure Radius Radius Precip Precip 10F 15 7 psi ft. ft. gpm 20 In/h In/h8 12F 11 2.60 2.07 2.39 12 3.00 2.01 2.32 30 10 10H 15 7 1512H 3.70 1.58 1.83 20 8 11 1.30 2.07 2.39 25 9 12 1.50 25 2.01 2.3211 30 10 10Q 15 7 12Q 15 1.85 1.58 1.83 20 8 11 0.65 2.07 2.39 25 9 12 0.75 25 2.01 2.3211 30 10 Note: All MPR0.92 nozzles tested cm) pop-ups 15 1.58on 4" (10.2 1.83
5 Serie
Flow gpm 0.86 0.96 1.05 0.37 0.52 0.18 0.21 0.26
Q Precip In/h 2.30 1.89 1.58 2.85 1.56 2.77 2.25 1.56
V Precip In/h 2.66 2.18 1.82 3.29 1.81 3.20 2.59 1.81
Flow gpm Flow 0.86 gpm 0.96 1.16 1.05 1.30 0.37 1.58 0.58 0.65 0.52 0.72 0.18 0.79 0.21 0.29 0.33 0.26
Q Precip In/h Q Precip 2.30 In/h 1.89 2.28 1.58 1.96 2.85 1.52 2.28 1.96 1.56 1.71 2.77 1.52 2.25 2.28 1.96 1.56
V Precip In/h V Precip 2.66 In/h 2.18 2.63 1.82 2.26 3.29 1.75 2.63 2.26 1.81 1.98 3.20 1.75 2.59 2.63 2.26 1.81
0.36 0.39
Flow
gpm Flow 1.16 gpm 1.30 1.58 0.58 0.65 0.72 1.20 0.79 0.29 0.33 0.36 0.60 0.39
1.71 1.52
1.98 1.75
Q V Precip V Precip In/h Precip 2.63 In/h 2.26 1.75 2.63 2.26 1.98 2.21 1.75 2.63 2.26 1.98 2.21 1.75
Q In/h Precip 2.28 In/h 1.96 1.52 2.28 1.96 1.71 1.91 1.52 2.28 1.96 1.71 1.91 1.52
12F
Pressure psi
Radius ft.
5F 5H 5Q 5 Serie
Trajec 5° 15 Seri Nozzle
30° Traje 5F Nozzle
15F 5H 15H 5Q 15Q
15 Seri
30° Traje Nozzle 15F
15H
15Q
Performanc Note: Spec Note: Radi
Q Square spacing based on 50% diameter of throw V Triangular 12 Seriesspacing MPR based on 50% diameter of throw
30° Trajectory 18 Nozzle
5° Trajec Nozzle
Flow gpm
Q Precip In/h
V Precip In/h
59
8
0.26
Radius ft. 7 8 10 7 8 9 10 7 8 9 10
Radius ft. 11 11
1.56
1.81
15' NOZZLE V
Q Flow Precip Precip gpm In/h In/h 1.16 2.28 2.63 1.30 1.96 2.26 1.58 1.52 1.75 0.58 2.28 2.63 0.65 1.96 2.26 0.72 1.71 1.98 90° RB-15Q 0.79 1.52 1.75 0.29 2.28 2.63 180° 1.96RB-15H 0.33 2.26 0.36 1.71 1.98 360°1.52RB-15F 0.39 1.75
8 Series HE-VAN
ADJ. HIGH EFFICENCY NOZZLE
15 Series MPR 30° Trajectory Nozzle 15F
15H
15Q
Pressure psi 15 20 30 15 20 30 15 20 30
Radius ft. 11 12 15 11 12 15 11 12 15
Flow gpm 2.60 3.00 3.70 1.30 1.50 1.85 0.65 0.75 0.92
Q Precip In/h 2.07 2.01 1.58 2.07 2.01 1.58 2.07 2.01 1.58
V Precip In/h 2.39 2.32 1.83 2.39 2.32 1.83 2.39 2.32 1.83
8'
HEVAN-8
10'
HEVAN-10
12'
HEVAN-12
12 Series HE
24° Trajectory 8 Series HE-VAN Nozzle Pressure psi 24° Trajectory 360° Arc 15 Nozzle Pressure 20 psi 25 360° Arc 15 30 20 270° Arc 15 25 20 30 25 270° Arc 15 30 20 180° Arc 15 25 20 30 25 180° Arc 15 30 20 90° Arc 15 25 20 30 25 90° Arc 15 30 20 25 30
Radius ft. 5Radius 6ft. 75 86 57 68 75 86 57 68 75 86 57 68 75 86 7 8
15' HEVAN-15 4 Series VAN 8 Series VAN 8 Series VAN 4 Series VAN ADJUST10 Series HE-VAN 8 Series VAN 4 Series VAN 5° Trajectory Q V 0° Trajectory Q 5° Trajectory V Precip 27° Trajectory Radius Q V 0° Trajectory Pressure Q Radius VFlow Precip ABLE Trajectory Q V 5° Trajectory 0° Nozzle Pressure Flow Precip Nozzle 10 Series Precip Radius Precip Q V Q V Pressure Radius Flow Precip Precip Nozzle Pressure Flow Precip psi Nozzle ft. HE-VAN gpm In/h In/h psi Pressure ft. Radius gpmFlow In/hNozzle In/hPrecip Flow Precip PrecipRadius Pressure Radius Nozzle Precip Nozzle Pressure Flow Precip Precip NOZZLE psiArc ft. gpm In/h In/h psi gpm 330° 15 6 1.21 330° ft. Arc 15 psi In/h 3 ft. In/h 0.62gpm 7.23In/h 8.35In/h gpm In/h psi In/h ft. gpm In/h In/h psi 3.53 ft. 4.07
27° Trajectory 7Arc 1.36 2.91 20 15 3 6 8.35 0.701.21 8.17330° Arc 4.07 15 620 360° 1.21 3.53 4.07 7 3.36 330° Arc 7.23 15 3 Arc 0.62 7.23 15 3 330° 3.53 9.43 330° Arc 0.62 8.35 15 Nozzle Pressure 25 7 1.55 3.32 3.83 25 20 4 7 9.43 0.801.36 5.252.91 6.063.36 20 7 1.36 2.91 3.36 8Radius 20 3 0.70 8.17 20 3 0.70 8.17 9.43 20 psi 30 8 1.70 2.79 30 4 0.88 5.78 6.67 3.32 3.83 0.80 5.25 25 6.06 25 7 1.55 3.32 3.83 9ft.3.22 4 0.8025 5.25 7 6.06 1.55 25 25 4 360° Arc 15 7 270° Arc 15 6 1.11 3.95 4.55 270° Arc 15 3 0.52 7.42 8.57 30 8 1.70 2.79 3.22 30 4 0.88 5.78 30 6.67 30 820 1.70 2.79 3.22 10 4' RB-4VAN 4 0.88 5.78 30 7 1.24 20 15 3 6 6.67 0.581.11 8.273.95 9.554.55 20 3.24 8 3.74 270° Arc 270° Arc 15 3 0.52 8.57 Arc 15 270° 6.11 Arc 15 625 270° 1.11 3.95 4.55 79 4.25 270° Arc 7.42 15 3 0.52 7.42 8.57 7 1.41 3.69 25 4 0.66 5.29 20 3 25 20 7 1.24 3.24 3.74 0.58 8.27 9.55 20 6' RB-6VAN 20 730 1.24 3.24 3.74 8103.58 3 0.58 8.27 8 1.55 30 25 4 7 9.55 0.731.41 5.863.69 6.774.25 30 3.10 25 4 0.66 5.29 20 6.11 25 180° 6Arc 0.84 180° 4 Arc 15 30 3 8 6.11 0.321.55 6.843.10 7.903.58 25Arc 715 3.69 4.25 97 5.18 0.66 5.29 270°1.41 15 4.49 0.73 5.86 25 6.77 1.20 1.91 30 2.21 4 30 20 7 0.97 3.81 20 3 0.37 7.91 9.13 8' RB-8VAN 30 8 1.55 3.10 3.58 10 4 Arc 0.7315 5.86 6 6.77 0.84 20 8 4.40 180° 4.49 5.18 180° Arc 0.32 6.84 30 7.90 15 3 7Arc 1.09 25 20 4 7 7.90 0.410.97 4.93180° 15 3.81 5.69 3 0.37 9.13 25 4.28 Arc 4.40 15 625 180° 0.84 4.49 5.18 79 4.94 180° Arc 7.91 15 3 0.32 6.84 20 30 8 1.19 3.58 4.13 30 4 0.45 5.41 6.25 20 25 7 1.09 4.28 4.94 25 4 0.41 4.93 20 5.69 10' RB-10VAN 30 715 0.97 3.81 4.40 8106.29 3 0.37 7.91 90°20 Arc 6 0.51 5.46 90° Arc 15 30 3 8 9.13 0.211.19 8.983.58 10.37 25 97 4.13 30 4 0.45 5.41 25 6.25 180° Arc 15 25 7 1.09 4.28 4.94 4 0.41 4.93 5.69 20 7 0.59 4.64 10 5.35 20 15 3 6 0.240.51 10.27 30 0.60 1.91RB-12VAN 90° Arc 5.46 11.86 6.29 90° Arc 15 2.21 3 0.21 8.98 10.37 20 5.19 12' 30 825 90° Arc 1.19 3.58 4.13 78 5.98 4 0.45 5.41 7 0.66 25 20 4 7 6.25 0.260.59 6.264.64 7.235.35 15 0.24 10.27 30 11.86 20 3 25 4.33 30 8 0.72 30 4 0.29 6.98 8.06 90° Arc 15 6 0.51 5.46 6.29 89 5.00 90° Arc 15 3 0.21 8.98 10.37 25 7 0.66 5.19 5.98 25 4 0.26 6.26 7.23 20 30 10 2 cm) pop-ups 15' Performance data taken in zero wind conditions RB-15VAN 20 7 0.59 4.64 5.35 8 Series HE-VAN0.2430 20 3 10.27 11.86 8 0.72 4.33 5.00 30 4 0.29 6.98 8.06 12 Series HE-VAN 25 97 meter of throw 8 Series VAN Note: Specify spray body and nozzles separately. 90° Arc HE-VAN15 8 Series HE-VAN 12 Series 25 7 0.66 5.19 5.98 25 4 0.26 6.26 7.23 30 10 iameter of throw 8 Series VAN Note: Radius reduction over 25% of24° the normal throw of the nozzle is not recommended 20 8 Trajectory 18' RB-18VAN Trajectory 24° Trajectory Q V 23° Q 30 8 0.72 4.33 5.00 V 30 4 VAN 0.29 6.98 8.06 Trajectory 5° Trajectory Q V 10 V 6 Series 8 Series HE-VAN Q Series VAN V 23° 25 Precip9 Precip Nozzle Pressure Radius Flow Precip Precip Nozzle Pressure Radius Flow 12 Series HE-VAN 5° Trajectory Nozzle Pressure Radius Flow Precip Precip Precip 30 10In/h Nozzle Pressure Radius Flow Precip Precip 8 Trajectory Series VAN VANpsi 6 Series Q V 4 Series VANVAN 10 Series V Pressure ft. gpm In/h In/h psi Nozzle ft. gpm In/h Radius 10° Trajectory 0° psi In/h 1524° Trajectory 0.83 ™Q V Nozzle Pressure ft. Radius gpm Flow In/h Precip In/h Precip 360°The Precip ft. In/hArc In/h 15 18 Series psi Q Arc Intelligent 5 ofpsi 3.19 3.68gpm 360° Use Water. 23° Trajectory 9 VAN 1.67 1.99 ft. V 330° Arc 15 6 1.21 3.53 4.07 Q V 8.35 2.30 5° Trajectory 0° Trajectory 10° Trajectory Nozzle Pressure Radius Flow Precip 0° Trajectory Nozzle Pressure Radius Flow Precip Precip psi ft. gpm In/h In/h In/h 5Radius 0.83 3.19 2.56 2.95V 360° Arc 15 20 10 1.93 1.86 9 Precip 2.15 20360° 0.96 Q 20 7 1.36 Q 2.91 Arc 6 15 Q V Q V 3.36 V Nozzle Pressure Flow Precip 3.68 Precippsi 9.43 Nozzle Pressure ft. gpm In/h Radius In/h psi ft. gpm In/h In/h 26° Trajectory 330° Arc 15 6 1.21 3.53 4.07 8.35 10 Series VAN 6 Series VAN Nozzle Pressure Radius Flow Precip Precip 25 7 1.07 2.10 2.42 Nozzle Pressure Radius Flow Precip Precip Nozzle Pressure Radius Flow Precip Precip 20 6ft. 0.96 2.56 2.95 25 18 Series Nozzle Pressure 7Radius 1.55 Flow Precip 3.83 Precip 11 VAN 2.16 1.72 10 1.99 20 4.39 gpm In/h 25 6.06 psi 3.80 ft. 360° Arc In/h 15 7 1.93 330° Arc 15 48 ft. psigpm 0.85 5.58 6.44 20 7 1.36 In/h3.32 2.91 In/hIn/h 3.36 9.43 psi ft. psi psi ft. ft. gpmgpm psi gpm In/h In/h In/h In/h In/h 30 1.17 1.76 2.03 30 12 2.37 1.58 1.83 25 7 1.07 2.10 2.42 25 11 Nozzle Pressure Radius 30 8 1.70 6.67 151.21 5 10° 0.83 3.19 3.68 20 360° 8Arc 15 2.32 3.50 9 4.04 20360° 0.96 4.03 4.65 25 1.55 7.232.79 3.32 8.353.22 3.83 6.06 330° Arc 15 4.07 330°330° Arc Arc 15 15 3 47 0.62 15 Arc 655 7 30 3.80Trajectory 0° Trajectory 0.85 5.58 6.44 270°360° ArcArc 0.621.93 3.53 3.19 3.684.39 270° Arc 15 9 1.25 1.99 2.30 psi ft. 8 1.17 1.76 2.03 30 12 26° Trajectory Q V 270° Arc 15 6 1.11 3.95 4.55 1.70 8.174.03 25 20 Q 75 8 20 V1.36 8.57 6 3.50 3.36 0.96 2.56 2.95 25 9 2.52 3.00 10 1.09 4.58 5.29 20 3.46 30 2.79 9.43 4.65 3.22 6.67 20 2.91 20 20 3 58 0.700.96 2.32 4.04 6 0.72 2.56 2.95 20 10 1.45 1.86 2.15 360° 15 14 ArcPrecip 15 0.62 3.19 3.68 Radius 270°Arc Arc 15 9112.89 20 7 1.24 3.74 Pressure Flow Precip Precip 9.55 Nozzle Radius 25 Flow Precip 30 10 2.60 2.50 30270° 1.20 3.50 4.04 75 Nozzle 1.07 2.10 2.42 25 Nozzle Pressure Radius 270° Arc 15 1.11 5.253.24 3.95 6.06Pressure 4.55 8.57 76 9 25 1.55 3.32 3.83 25 25 4 56 0.80 25 2.52 3.00 3.46 1.09 4.58 5.29 0.80 2.10 2.42 25 11 1.62 1.72 1.99 20 15 20 68 0.72 2.56 2.95 20 10 25 77 1.41 3.69 4.25 6.11 psi ft. gpm In/h In/h 270° Arc 15 7 1.45 3.80 4.39 psi ft. gpm In/h In/h 270° Arc 15 4 0.79 6.34 7.32 30 1.17 1.76 2.03 psi ft. 30 12 20 1.24 3.24 3.74 9.55 30 30 8 10 1.70 30 30 4 6 0.881.20 5.783.50 6.674.04 2.50 3.22 0.882.60 2.79 1.76 2.032.89 30 12 1.77 1.58 17 1.83 25 25 75 360° 5.22 0.80 2.10 30 8 1.55 3.58 6.77 25 11 8Arc 1.75 3.50 20270° 0.88 4.52 Arc 4.39 15 Arc 2.42 1.93 3.80 4.39 14 330° Arc7.423.10 4Arc 0.85 6.44 0.62 3.19 3.68 720 360° 15 25 1.41 3.69 8.5715 4.25 6.11 270°Arc 9 4.04 270° 15 655 7 15 1.11 270°270° Arc Arc 15 15 3 47 0.52 270° Arc 15 Arc5.58 1.45 3.95 3.80 4.55 0.79 6.34 7.32 180° Arc 0.41 3.19 3.68 180° 15 9 0.84 1.99 2.30 30 180° Arc 15 6 0.84 5.18 7.90 86 3.50 3.74 0.88 1.76 2.03 30 12 9 1.89 3.00 25 20 1.00 5.13 5.92 30 1.55 8.274.49 3.10 9.5520 3.58 6.77 20 0.72 2.56 2.95 825 20 15 20 2.32 3.50 4.04 18 20 756 8 30 1.24 103.46 20 20 3 58 0.580.88 1.75 3.24 4.04 5 0.96 4.03 4.65 4.52 5.22 0.48 2.56 2.95 20 10 0.97 1.86 2.15 20 7 0.97 4.40 9.13 270° Arc 15 14 180° Arc 15 5 0.41 3.19 3.68 30 10 2.10 2.70 3.12 180° Arc 15 9 30 6 1.10 3.92 4.53 180° Arc 15 0.84 5.293.81 4.49 5.18 7.90 25 7 1.41 3.69 4.25 25 7 0.80 2.10 2.42 25 17 25 25 4 56 0.661.00 6.11 25 9 1.89 3.00 3.46 5.13 25 5.92 0.53 2.10 2.42 25Arc 915 2.52 3.00 3.46 114.39 25 11 1.08 1.72 1.99 5 1.09 4.58 5.29 25 7 1.09 5.69 180° 7 0.97 3.80 15 20 180° Arc 15 30 4 10 20 0.42 5.05 5.83 68 2.70 3.58 0.48 2.56 2.95 20 10 20 0.97 5.864.28 3.81 6.774.94 4.40 9.13 30 8 1.55 3.10 30 30 4 67 0.731.10 2.10 3.12 3.92 4.53 30 0.88 1.76 2.03 30 18 0.59 1.76 2.03 12 30 12 1.18 1.58 1.83 30 10 2.60 2.50 2.89 17 4.04 304.94 6 1.20 3.50 4.04 30 8 1.19 6.25 20 8 1.20 3.50 20180° 0.49 3.77 4.35 25 75 3.80 5.18 0.53 2.10 2.42 25 11 25 1.09 6.843.58 4.28 7.904.13 5.69 180° Arc Arc 15 0.84 180°180° Arc Arc 15 15 3 47 0.320.42 180° 15 Arc 655 7 25 0.97 4.49 4.39 5.05 5.83 90° Arc 0.21 3.19 3.68 15 0.41 3.19 3.68 270° Arc 15 14 90° Arc 15 9 0.42 1.99 2.30 180° Arc 9 270° 4.90 Arc 0.59 15 725 1.45 3.80 4.39 18 270° Arc7.915.46 4 0.79 6.34 7.32 90° Arc 15 6 0.51 6.29 10.37 9 1.26 3.00 3.46 25 20 0.55 4.24 30 8 1.76 2.03 30 1.19 3.58 9.1315 4.13 6.25 30 12 20 756 8 30 0.97 3.81 4.40 20 20 3 58 0.370.49 1.20 3.50 4.04 3.77 4.35 2.56 2.950.48 20 10 0.48 1.86 15 2.15 20 0.24 6 2.56 2.95 830 20 103.23 20 7 0.59 5.35 11.86 20 1.75 3.50 4.04 14 10 1.45 2.80 5 0.88 5.22 3090° 0.60 3.21 3.71 90° Arc 15 0.51 4.934.64 5.46 5.6920 6.29 10.37 180° Arc 15 15 57 3.00 4.94 0.21 3.19 3.68 25 25 76 9 25 1.09 90° Arc 15 9111.99 25 25 4 56 0.410.55 25Arc 4.52 1.26 4.28 3.46 4.24 4.90 0.27 2.10 2.42 11 0.54 1.72 0.53 2.10 2.42 25 17 25 7 0.66 5.98 7.23 90° Arc 7 0.48 3.80 90° Arc 15 30 0.26 6.26 7.23 25 915 1.89 3.00 3.46 15 5 1.00 5.13 5.92 20 0.59 5.415.19 4.64 6.2525 5.35 11.86 20 30 84 10 20 1.19 68 2.80 4.13 0.24 2.56 2.95 30 30 4 67 0.450.60 3.21 3.71 20 104.39 0.291.45 3.58 1.76 2.033.23 30 12 0.59 1.58 1.83 30 0.59 1.76 2.03 20 30 18 12 30 8 0.72 5.00 8.06 8 0.58 3.50 4.04 20 15 0.300.48 5.46 4.62 5.334.39 25 0.66 8.984.33 5.19 10.37 5.98 7.23 90° Arc 15 65 7 25 0.51 30 10 2.10 2.70 3.12 17 90° Arc 15 15 3 47 0.210.26 90° 25 30 6 Arc 1.10 3.92 4.53 90° Arc 6.26 7.23 7 3.80 6.29 0.27 2.10 2.42 25 11 90° Arc 15 5 0.21 3.19 3.68 180° Arc 15 14 90° Arc 9 3.46 25 9 0.63 3.00 25 5 0.34 5.24 6.05 30 0.72 4.33 11.86 5.00 8.06 20 7 8 30 0.590.58 4.64 20 20 3 58 0.24 20 3.50 5.35 4.04 0.30 5.33 30 18 8 0.29 1.76 2.03 180° Arc 15 7 0.97 3.80 4.39 30 12 180° Arc10.274.62 15 4 0.42 5.05 5.83 200.37 6 0.24 2.56 2.95 30 20 103.35 10 0.75 2.90 15 30 3.96 4.573.46 25 76 9 4.35 0.660.63 5.19 25 25 4 5 0.260.34 6.265.24 7.2320 3.00 5.98 6.05 90° Arc 15 20 1.20 3.50 4.04 14 5 0.4925 3.77 7 2.90 5.003.35 0.27 2.10 2.42 8 25 17 11 30 30 8 10 250.720.75 4.33 30 30 4 6 0.290.37 6.983.96 8.064.57 1525 Series HE-VAN 10 Series HE-VAN 20 10 Series VAN 1.26 3.00 3.46 15 25 5 0.55 4.24 4.90 30 8 0.29 1.76 2.03 9 30 18 12 25 17 30 10 1.45 2.80 3.23 12 Series VAN 90° Arc 15 14 30 6 0.60 3.21 3.71 25° Trajectory 10 Series VAN 15 Series VAN 27° Trajectory HE-VAN 30 Q 18 V 10 Series HE-VAN Q V 15 Series 10° Trajectory Q V V 20 90° Arc 15 7Pressure 0.48 4.39 15 Precip Arc 15 415 Series VAN 0.26 12 Series VAN Pressure Radius 90°Flow Nozzle Radius 3.80 Flow Precip Nozzle Pressure 6.26 Radius 7.23 Flow Precip Precip Trajectory 10° Trajectory Precip Precip Trajectory Precip 15° gpm Q V 10 Series Nozzle Q V 23°20 25 Q V 6 Series VAN V 8psi 0.58 3.50 4.04 17 In/h ft. gpm In/h psi27° Trajectory ft. In/h In/h 20 5 VAN 0.30 4.62 5.33 25° Trajectory psi ft. gpm In/h In/h In/h 2.40 15° Trajectory Q V Nozzle Pressure Radius Flow Precip Precip Nozzle Pressure Radius Flow Precip Precip 23° Trajectory Nozzle Pressure Radius Flow Precip Precip Precip 15 Series HE-VAN 30 10 Series HE-VAN 360° Arc 15 11 2.62 2.08 360° 15 7 6.05 1.26 2.48Q 2.86V 360° Arc 15 1.93 Q V 25 9psi Nozzle 0.63 3.00 3.46 18 5Arc 0.34 5.24 7ft. 3.80 4.39 6.44 psi ft. gpm In/h In/h Pressure psi gpmQ Precip In/h V 25 In/h 10° Trajectory Nozzle Pressure Radius Flow Precip Precip20 ft. gpm In/h Radius In/h In/h 0° Trajectory Q V 12 3.02 2.02 2.33 20 8 1.46 2.19 2.53 Nozzle Pressure Radius Flow Precip Nozzle Pressure Radius Flow Precip Precip 20 87 2.32 3.50 4.04 30Arc In/h 10 0.75 2.90 3.35 ft. 2.39 4.65 30 6 0.37 3.96 4.57 psi 360° Arc 15 9 1.56 1.86 2.14 psi ft. gpm In/h 360° Arc 15 1.93 3.80 4.39 25° Trajectory 360° 15 11 2.60 2.07 6.44 27° Trajectory Nozzle Pressure Radius Flow Precip Precip Nozzle Pressure Radius Flowgpm Precip Precip psi ft. In/h In/h 25 14 3.38 1.66 1.92 25 psi 9 ft. 1.63gpm 1.94 2.24In/h In/h 2.06 Q V 25 9 2.52 3.00 3.46 5.29 20 1.86 20 2.32 In/h1.86 3.50 In/h2.14 4.04 360° Arc 15 20 12 3.00 2.01 111.83 2.32 4.65 7Radius 1.26 2.48 psi ft. gpm In/h psi 15 ft. 98 gpm1.56 360° Arc 15 3.70 1.58 360° Arc 15 Arc 10 2.07 In/h 30360° 10 11 15 1.782.60 1.79 1.72 1.982.39 Nozzle Pressure Radius Nozzle Pressure Flow Precip 2.86 Precip30 30 10 2.60 2.50 2.89 4.04 25 11 2.12 1.68 25 9 2.52 5.581.79 3.00 6.442.06 3.46 25 14 3.30 1.62 12 1.87 5.29 20 360° Arc 15 77 12 20 1.93 3.80 4.39 8ft. 2.01 1.95 1.46 2.19Arc In/h 2.53 15 330° Arc 15 20 4 10 0.851.86 270° 11 1.96 2.08 20 3.00 2.32 270° Arc 15 0.95 2.48 2.86 psi ft. 2.40 psi gpm In/h 270° Arc 15 710 1.45 3.80 4.39 7.32 30 12 2.36 1.58 1.82 30 2.60 2.50 2.89 30 15 3.70 1.58 1.83 4.04 20 8 2.32 3.50 4.04 20 25 5 11 0.96 4.03 4.65 25 14 25 9 1.63 1.94 2.24 122.12 Series VAN 1.68 1.95 15 Series VAN 2.48 20 12 2.27 2.02 112.33 25 Arc 8 14 15 1.093.30 2.19 1.62 20360° 2.531.87 360° Arc 15 7 1.26 2.86 20 8 1.75 3.50 4.04 5.22 270° Arc 15 99 15 301.17 270° Arc 15 7 1.45 4.581.58 3.80 5.291.82 4.39 270° Arc 1.98 25 15 11 1.95 2.07 151.92 2.39 7.32 25 2.52 3.00 3.46 25 30 5 12 1.092.36 30 10 1.78 1.72 14 2.53 1.66 1.58 2.14 25 30 1.223.70 1.86 1.94 2.241.83 20 12 2.32 20 8 1.46 2.19 2.53 25 98 1.89 3.00 3.46 5.92 20 10 1.39 1.79 2.06 20 1.75 3.50 4.04 20 12 2.25 2.01 5.22 30 2.60 2.89 30 15 6 9 1.20 3.501.86 4.042.14 15°1.17 Trajectory 23° Trajectory 270° Arc Arc 15 2.78 1.58 11 15 0.95 2.48 2.86 30 270° 15 ArcQ 10 11 25 30270° 1.341.95 2.50 1.72 1.982.39 30 10 2.10 2.70 25 4.53 97 2.07 1.63 1.94 2.24 0.79 3.12 Arc 25 V1.59 270° 15 14 Q V 141.83 11 1.68 1.94 25 9 1.89 6.341.79 3.00 7.32 3.46 25 2.48 1.62 1.87 5.92 270° Arc 15 7 1.45 3.80 4.39 270° Arc 15 20 4 10 1.39 2.06 180° Arc 1.98 15 11 1.31 2.08 12 180°Radius Arc 15 20 7 12 20 0.632.25 2.48 2.862.32 20 8102.01 1.09 2.19 2.53 Radius 180° Arc 15 710 0.97 3.80 4.39 5.83 30 152.40 1.78 1.72 Nozzle Pressure Flow Precip Precip Nozzle Pressure Flow Precip Precip 30 12 1.77 1.82 30 2.10 4.521.68 2.70 5.22 3.12 30 15 2.78 1.58 1.83 4.53 20 88 14 30 1.75 3.50 4.04 20 25 5 11 0.88 1.59 1.94 20 1.51 2.02 20 25 0.732.48 1.58 2.19 2.531.87 25 25 97 1.62 2.14 1.22 1.94 20 87 1.20 3.50 4.04 4.35 270° 12 Arc 15 112.33 psi gpm In/h 270° ArcIn/h 0.95 2.48 2.86 ft. psiArc 2.24 gpm In/h In/h 14 180°ft. Arc 15 99 15 15 0.78 180° Arc 15 0.97 5.131.58 3.80 5.92 4.39 180° 15 11 1.30 2.07 2.39 5.83 25 1.89 3.00 25 30 5 12 1.001.77 1.82 25 14 1.69 1.66 1.92 1.58 3.46 25 30 0.812.78 1.86 1.94 2.241.83 30 15 30 10 1.34 1.72 1.98 25 9 1.26 3.00 3.46 4.90 20 12 20 8 1.09 2.19 2.53 20 10 0.93 1.79 2.06 20 1.20 3.50 4.53 4.04 20 12 1.50 2.01 2.32 360° Arc3.921.86 15 9 1.56 1.86 2.14 4.35 30 2.10 2.70 3.12 360° Arc 15 11 2.60 2.07 2.39 30 15 6 98 1.10 180° Arc 0.78 2.14 30 15 1.85 1.58 1.83 180° Arc 15 Arc 10 11 15 0.891.30 1.72 2.07 1.982.39 30180° 180° Arc 15 11 7 0.63 2.48 2.86 30 10 1.45 2.80 3.23 3.71 25 14 25 11 1.06 1.68 1.95 25 9 1.26 5.051.79 3.00 5.83 3.46 9 2.01 4.39 1.22 1.94 25 14 1.65 1.62 1.87 4.90 180° Arc 15 77 12 25 0.97 180° Arc 15 20 4 10 0.420.93 20 10 1.86 1.79 2.06 20Arc 2.24 3.00 2.01 2.32 122.40 2.06 90° 15 11 0.65 2.08 90° Arc 15 20 0.321.50 3.80 2.48 2.862.32 90° Arc 15 710 0.48 3.80 4.39 20 7.23 810 0.73 2.19 2.53 12 30 12 1.18 1.82 30 1.45 3.771.68 2.80 4.35 3.23 30 15 1.85 1.58 1.83 30 3.71 30 1.34 1.72 1.98 20 88 14 20 1.20 3.50 4.04 20 25 5 11 0.491.06 1.95 20 12 0.76 2.02 25 11 2.12 1.68 1.95 20 25 0.361.65 1.58 2.19 2.531.87 25 14 3.30 1.62 1.87 15 20 87 0.58 3.50 4.04 5.33 25 142.33 97 1.62 2.14 0.81 1.94 2.24 90° Arc 15 99 15 25 0.39 1.86 90° Arc 15 0.48 4.241.58 3.80 4.901.82 4.39 90° Arc 15 11 0.65 2.07 11 2.39 7.23 180° Arc 15 25 1.26 3.00 3.46 180° Arc 15 0.63 2.48 2.86 25 30 5 12 0.551.18 25 14 0.84 1.66 1.92 30 1.85 1.58 1.83 25 0.41 1.94 2.24 30 12 2.36 1.58 1.82 30 15 3.70 1.58 1.83 25 9 0.63 3.00 3.46 6.05 30 15 30 10 0.89 1.72 1.98 20 10 0.46 1.79 2.06 20 8 0.58 3.50 4.04 20 12 0.75 2.01 121.83 2.32 5.33 30 1.45 30 15 6 9 0.600.39 3.211.86 3.712.14 20 8 2.07 3.23 0.73 2.19 2.53 30 90° Arc 15 0.93 1.58 90° 30 15 10 11 20 0.450.65 2.80 1.72 1.98 30 10 0.75 3.35 4.57 270° Arc6.262.90 15 9 Arc 1.17 1.86 2.14 270°1.95 Arc2.39 15 11 1.95 2.07 2.39 90° Arc 15 11 90° Arc 15 7 0.32 2.48 2.86 25 11 0.53 1.68 25 9 0.63 3.00 3.46 25 14 0.82 1.62 1.87 6.05 90° Arc 15 7 0.48 3.80 4.39 90° Arc 15 20 4 10 0.26 7.23 25 14 0.81 1.94 2.24 0.46 1.79 2.06 20 12 25 0.75 9 2.01 2.32 20 10 1.39 1.79 2.06 20 30 12 0.59 20 2.25 2.01 2.32 12 30 10 0.75 4.621.68 2.90 5.33 3.35 8101.62 1.82 0.36 2.19 2.53 12 30 15 0.92 1.58 4.57 20 25 8 14 20 0.580.82 1.58 3.50 4.041.87 20 25 5 11 0.300.53 1.95 30 15 1.83 30 0.89 1.72 1.98 25 25 11 1.59 1.68 1.94 9 1.58 3.461.83 0.41 1.94 2.24 2590° 9 15 25 0.630.92 3.00 25 14 2.48 1.62 1.87 14 25 30 5 12 0.340.59 5.241.58 6.05 1.82 30 90° Arc 15 11 Arc 15 7 0.32 2.48 2.86 15 Series VAN 18 Series 30 30 10 0.75 2.90 3.35 30 10 0.45 1.72 1.98 30 6 0.37 3.96 4.57 30 12 VAN 1.77 1.58 1.82 30 2.78 1.58 1.83 15 20 12 20 8 0.36 2.19 2.53 15 15Trajectory Series VAN 180° Arc 15 9 0.78 1.86 2.14 23° 26° Trajectory 180° Arc 15 11 1.30 2.07 2.39 25 14 25 1.94 2.24 V Q V Q 9 V 0.41 20 10 0.93 1.79 2.06 30 15 30 10 0.45 1.72 1.98 20 12 1.50 2.01 2.32 Precip 23° Trajectory Pressure Radius Flow Precip Precip Nozzle Precip Precip 12 Series VAN V 15 Series VAN Pressure Radius Flow Nozzle Q V In/h psi ft. gpm In/h In/h psi ft. gpm In/h In/h 25 11 1.06 1.68 1.95 18 Series VAN 25 14 1.65 1.62 1.87 Precip Nozzle Pressure Radius Flow Precip Precip 2.14 In/h 2.06 2.14 1.95 2.06 1.82 1.95 2.14 1.82 2.06 2.14 1.94 2.06 1.82 1.94 2.14 1.82 2.06 2.14 1.95 2.06 1.82 1.95 2.14 1.82 2.06 2.14 1.95 2.06 1.82 1.95 1.82
360° Arc 15° Trajectory 360° Arc Nozzle
360° Arc
270° Arc 270° Arc
270° Arc
180° Arc 180° Arc
180° Arc
90° Arc 90° Arc
90° Arc
60
15 psi 20 15 Pressure 25 psi 20 25 15 30 30 20 15 20 25 15 20 30 25 25 15 30 30 20 15 15 25 20 25 30 20 25 15 30 30 20 15 20 25 15 20 30 25 25 15 30 20 30 25 30
11 ft. 12 11 Radius 14 ft. 12 14 9 15 15 10 11 12 11 11 12 12 14 14 9 15 15 10 11 11 11 12 14 12 12 14 9 15 15 10 11 12 11 11 12 12 14 14 9 15 10 15 11 12
2.60 2.39 gpmQ 2.07 In/hV 30 In/h 3.00 2.01 2.32 2.07 Precip 2.39 90°2.60 ArcPrecip 15 Flow 3.30 1.62 1.87 gpm3.00 In/h 2.01 In/h202.32 1.83 3.30 1.861.58 1.62 2.1425 1.87 1.563.70 3.70 1.792.07 1.58 2.062.39 1.83 1.861.95 2.32 1.95 1.682.01 2.07 1.9530 2.39 2.122.25 2.25 1.581.62 2.01 1.821.87 2.32 2.362.48 2.48 1.861.58 1.62 2.141.83 1.87 1.172.78 2.78 1.792.07 1.58 2.062.39 1.83 1.391.30 1.30 1.682.01 2.07 1.942.32 2.39 1.591.50 1.65 1.62 1.87 1.77 1.50 1.58 2.01 1.82 2.32 1.65 1.861.58 1.62 2.141.83 1.87 0.781.85 1.85 1.792.07 1.58 2.062.39 1.83 0.930.65 0.65 1.682.01 2.07 1.952.32 2.39 1.060.75 0.75 1.581.62 2.01 1.821.87 2.32 1.180.82 0.82 1.861.58 1.62 2.141.83 1.87 0.390.92 0.46 0.92 1.79 1.58 2.06 1.83 0.53 1.68 1.95 0.59 1.58 1.82
360° Arc 23° Trajectory 12 9 Nozzle
10
360° Arc 270° 11 Arc
12
270° Arc 180° Arc
180° Arc 90° Arc
90° Arc
15 14 4.21 1.18 1.58 1.82 26° Trajectory 20 15 4.70 18 Series 0.39 1.86 Pressure Radius Flow VAN 2.14 25 17 4.86 Nozzle 1.79 Pressure psi ft. gpm 0.46 2.06 30 18 5.32 psi 15 11 2.60 0.53 1.68 26° Trajectory 1.95 15 3.16 15 20360° Arc 14 12 3.00 Pressure 0.59 1.82 20Nozzle 1.58 15 3.52 25 25 30360° Arc 30 15 15 20270° Arc 20 25 25 30 30 15270° Arc 15 20 180° Arc 20 25 25 30 30 15180° Arc 20 2590° Arc 30 90° Arc
14 17 15 18 11 14 12 15 14 17 15 18 11 14 12 15 14 17 15 18 11
12 14 15
20 3.30 psi 3.65 3.70 25 15 3.99 1.95 30 20 2.11 2.25 15 2.35 25 2.48 20 30 2.43 2.78 25 15 2.66 1.30 30 20 1.05 1.50 15 1.17 25 1.65 20 30 1.22 1.85 25 0.65 15 1.33 30 20 0.75 15 0.82 25 20 0.92 30 25 15 30 20
2.07 2.39 Q V 2.01 2.32 90° Arc Precip Precip 1.62 1.87 Radius In/hFlow In/h 1.58 1.83 ft. gpm 2.07 2.39 2.07 2.39 14 2.01 2.324.21 Radius2.32 Flow 2.01 15 4.70 1.62 1.87gpm ft. 1.62 1.87 1.58 1.834.86 17 14 4.21 1.58 1.83 2.07 2.395.32 18 15 4.70 2.07 2.39 2.01 2.323.16 14 17 4.86 2.01 2.32 1.62 1.87 15 3.52 1.62 1.87 18 1.58 1.835.32 17 3.65 1.58 1.83 14 3.16 2.07 2.393.99 18 2.07 2.39 15 2.01 2.323.52 14 2.11 2.01 2.32 17 1.62 1.873.65 15 1.62 1.87 18 3.99 1.58 1.832.35 1.58 1.83 17 2.07 2.392.43 14 2.11
18 2.01 15 14 1.62 17 15 1.58 18 17 14 18 15
2.322.66 2.35 1.05 1.872.43 1.17 1.832.66
1.22 1.05 1.33 1.17
30
Q 15 Precip 20 In/h Q 25 2.07 Precip 30 2.01 In/h 1.62 2.07 1.58 2.01 2.07 1.62 2.01 1.58 1.62 2.07 1.58 2.01 2.07 1.62 2.01 1.58 1.62 2.07 1.58 2.01 2.07 1.62 2.01 1.58 1.62 2.07 1.58 2.01
15
V 11 Precip12 In/h V 14 2.39 Precip 2.32 15 In/h 1.87 2.39 1.83 2.32 2.39 1.87 2.32 1.83 1.87 2.39 1.83 2.32 2.39 1.87 2.32 1.83 1.87 2.39 1.83 2.32 2.39 1.87 2.32 1.83 1.87 2.39 1.83 2.32
1.85 0.65 0.75 0.82 0.92
1.58 2.07 2.01 1.62 1.58
1.83 2.39 2.32 1.87 1.83
Flow gpm 0.83 Flow 0.96 gpm 1.07 0.83 1.17 0.96 0.62 1.07 0.72 1.17 0.80 0.62 0.88 0.72 0.41 0.80 0.48 0.88 0.53 0.41 0.59 0.48 0.21 0.53 0.24 0.59 0.27 0.21 0.29 0.24 0.27 0.29
Q Precip In/h Q 3.19 Precip 2.56 In/h 2.10 3.19 1.76 2.56 3.19 2.10 2.56 1.76 2.10 3.19 1.76 2.56 3.19 2.10 2.56 1.76 2.10 3.19 1.76 2.56 3.19 2.10 2.56 1.76 2.10 3.19 1.76 2.56 2.10 1.76
V Precip In/h V 3.68 Precip 2.95 In/h 2.42 3.68 2.03 2.95 3.68 2.42 2.95 2.03 2.42 3.68 2.03 2.95 3.68 2.42 2.95 2.03 2.42 3.68 2.03 2.95 3.68 2.42 2.95 2.03 2.42 3.68 2.03 2.95 2.42 2.03
23° Trajectory 12 Series HE Nozzle 23° Trajectory 360° Arc Nozzle 360° Arc 270° Arc 270° Arc 180° Arc 180° Arc 90° Arc 90° Arc
15 Series HE Flow gpm 1.26 Flow 1.46 gpm 1.63 1.26 1.78 1.46 0.95 1.63 1.09 1.78 1.22 0.95 1.34 1.09 0.63 1.22 0.73 1.34 0.81 0.63 0.89 0.73 0.32 0.81 0.36 0.89 0.41 0.32 0.45 0.36 0.41 0.45 Flow gpm 1.67 Flow 1.93 gpm 2.16 Flow 1.67 gpm 2.37 1.93 4.21 1.25 2.16 Flow 4.70 1.45 gpm 2.37 4.86 1.62 4.21 1.25 5.32 1.77 4.70 1.45 3.16 0.84 4.86 1.62 3.52 0.97 5.32 1.77 3.65 1.08 3.16 0.84 3.99 1.18 3.52 0.97 2.11 0.42 3.65 1.08 2.35 0.48 3.99 1.18 2.43 0.54 2.11 0.42 2.66 0.59 2.35 0.48 1.05 2.43 0.54 1.17 2.66 0.59 1.22 1.05 1.33 1.17 1.22 1.33 Flow gpm 2.62 Flow 3.02 gpm 3.38 2.62 3.70 3.02 1.96 3.38 2.27 3.70 2.53 1.96 2.78 2.27 1.31 2.53 1.51 2.78 1.69 1.31 1.85 1.51 0.65 1.69 0.76 1.85 0.84 0.65 0.93 0.76 0.84 0.93
Q Precip In/h Q 2.48 Precip 2.19 In/h 1.94 2.48 1.72 2.19 2.48 1.94 2.19 1.72 1.94 2.48 1.72 2.19 2.48 1.94 2.19 1.72 1.94 2.48 1.72 2.19 2.48 1.94 2.19 1.72 1.94 2.48 1.72 2.19 1.94 Q 1.72 Precip In/h Q 1.99 Precip 1.86 Q In/h 1.72 Precip 1.99 In/h 1.58 1.86 Q 2.07 1.99 1.72 Precip 2.01 1.86 In/h 1.58 1.62 1.72 2.07 1.99 1.58 1.58 2.01 1.86 2.07 1.99 1.62 1.72 2.01 1.86 1.58 1.62 1.72 2.07 1.99 1.58 1.58 2.01 1.86 2.07 1.99 1.62 1.72 2.01 1.86 1.58 1.62 1.72 2.07 1.99 1.58 1.58 2.01 1.86 2.07 1.62 1.72 2.01 1.58 1.62 2.07 1.58 2.01 1.62 Q 1.58 Precip In/h Q 2.08 Precip 2.02 In/h 1.66 2.08 1.58 2.02 2.08 1.66 2.02 1.58 1.66 2.08 1.58 2.02 2.08 1.66 2.02 1.58 1.66 2.08 1.58 2.02 2.08 1.66 2.02 1.58 1.66 2.08 1.58 2.02 1.66 1.58
V Precip In/h V 2.86 Precip 2.53 In/h 2.24 2.86 1.98 2.53 2.86 2.24 2.53 1.98 2.24 2.86 1.98 2.53 2.86 2.24 2.53 1.98 2.24 2.86 1.98 2.53 2.86 2.24 2.53 1.98 2.24 2.86 1.98 2.53 2.24 V 1.98 Precip In/h V 2.30 Precip 2.15 V In/h 1.99 Precip 2.30 In/h 1.83 2.15 V 2.39 2.30 1.99 Precip 2.32 2.15 In/h 1.83 1.87 1.99 2.39 2.30 1.83 1.83 2.32 2.15 2.39 2.30 1.87 1.99 2.32 2.15 1.83 1.87 1.99 2.39 2.30 1.83 1.83 2.32 2.15 2.39 2.30 1.87 1.99 2.32 2.15 1.83 1.87 1.99 2.39 2.30 1.83 1.83 2.32 2.15 2.39 1.87 1.99 2.32 1.83 1.87 2.39 1.83 2.32 1.87 V 1.83 Precip In/h V 2.40 Precip 2.33 In/h 1.92 2.40 1.83 2.33 2.40 1.92 2.33 1.83 1.92 2.40 1.83 2.33 2.40 1.92 2.33 1.83 1.92 2.40 1.83 2.33 2.40 1.92 2.33 1.83 1.92 2.40 1.83 2.33 1.92 1.83
25° Trajectory 15 Series HE Nozzle 25° Trajectory 360° Arc Nozzle 360° Arc 270° Arc 270° Arc 180° Arc 180° Arc 90° Arc 90° Arc
TORO PRESSURE COMPENSATING NOZZLES Just pick your spacing and choose your arc - the nozzle does everything else. With a wide selection of patterns available, you are assured an MPR nozzle can match just about any design requirement. PRE-INSTALLED PRESSURE COMPENSATION DEVICE (PCD) ELIMINATE FOGGING, CONSERVE WATER AND PROVIDE PRECISE FLOW RATES..
5' with 0° Trajectory
5' Series with 0° Trajectory Arc
Desc. 5-Q-PC 5-T-PC 5-H-PC 5-TT-PC
90°
5-Q-PC
120°
5-T-PC
180°
5-H-PC
240° 270° 360°
Prec. Rate PSI GPM Radius SQ TR 30-40 0.09 5 1.61 1.40 40-75 0.10 5 1.79 1.55 30-40 0.12 5 1.61 1.40 40-75 0.13 5 1.79 1.55 30-40 0.18 5 1.61 1.40 40-75 0.20 5 1.79 1.55 30-40 0.23 5 1.54 1.34 40-75 0.27 5 1.81 1.57 30-40 0.26 5 1.55 1.34 40-75 0.29 5 1.73 1.50 30-40 0.35 5 1.57 1.36 40-75 0.39 5 1.75 1.51
8' with 5° Trajectory
8-T-PC
180°
8-H-PC
5-TT-PC
240°
8-TT-PC
5-TQ-PC
270°
8-TQ-PC
5-F-PC
360°
8-F-PC
10' Series with 12° Trajectory Arc
Desc. 10-Q-PC 10-T-PC 10-H-PC 10-TT-PC
PSI
GPM
30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
0.33 0.37 0.44 0.50 0.66 0.75 0.89 1.00 0.99 1.09
Radius 10 10 10 10 10 10 10 10 10 10
Prec. Rate SQ TR 1.48 1.28 1.66 1.43 1.48 1.28 1.68 1.45 1.48 1.28 1.68 1.45 1.49 1.29 1.68 1.45 1.48 1.28 1.63 1.41
12' with 23° Trajectory
90°
12-Q-PC
120°
12-T-PC
10-H-PC
180°
12-H-PC
240°
10-TT-PC
240°
12-TT-PC
270°
10-TQ-PC
270°
12-TQ-PC
10-F-PC
360°
12-F-PC
90°
10-Q-PC
120°
10-T-PC
180°
360°
15' with 27° Trajectory
10-TQ-PC
15' Series with 27° Trajectory Arc
Desc. 15-Q-PC 15-T-PC 15-H-PC 15-TT-PC
PSI 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
Prec. Rate GPM Radius SQ TR 0.75 15 1.49 1.29 0.81 15 1.61 1.40 1.00 15 1.49 1.29 1.10 15 1.64 1.42 1.50 15 1.49 1.29 1.65 15 1.64 1.42 2.00 15 1.49 1.29 2.20 15 1.64 1.42 2.30 15 1.53 1.32 2.50 15 1.66 1.44 3.00 15 1.49 1.29 3.30 15 1.64 1.42
8-Q-PC
8-TT-PC
120°
10' with 12° Trajectory
Desc.
8-T-PC
8-Q-PC
5-F-PC
Arc
8-H-PC
90°
5-TQ-PC
8' Series with 5° Trajectory
SPECIAL PATTERN
8-TQ-PC 8-F-PC
PSI
GPM
30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
0.22 0.25 0.29 0.35 0.44 0.50 0.59 0.70 0.64 0.70 0.85 1.00
Arc
Desc.
30-40 40-75 30-40 12-T-PC 40-75 30-40 12-H-PC 40-75 30-40 12-TT-PC 40-75 30-40 12-TQ-PC 40-75 30-40 12-F-PC 40-75
Pattern
Desc. 4-EST-PC 4-CST-PC 9-SST-PC 4-SST-PC
4' x 30'
4-CST-PC
4S-SST-PC
9' x 18'
9-SST-PC
15-TT-PC
4' x 30'
4-SST-PC
15-TQ-PC
2' x 6'
2-SST-PC
15-F-PC
4' x 18'
4S-SST-PC
120°
15-T-PC
180°
15-H-PC
240° 270° 360°
15-F-PC
GPM 0.48 0.53 0.64 0.70 0.96 1.05 1.28 1.40 1.44 1.60 1.92 2.10
Radius 12 12 12 12 12 12 12 12 12 12 12 12
Prec. Rate SQ TR 1.49 1.29 1.65 1.43 1.49 1.29 1.63 1.41 1.49 1.29 1.63 1.41 1.49 1.29 1.63 1.41 1.49 1.29 1.66 1.44 1.49 1.29 1.63 1.41
Special Patterns
2-SST-PC
15-TQ-PC
PSI
12-Q-PC
4-EST-PC
15-Q-PC
Prec. Rate SQ TR 1.54 1.33 1.75 1.51 1.52 1.32 1.84 1.59 1.54 1.33 1.75 1.51 1.55 1.34 1.84 1.59 1.49 1.29 1.63 1.41 1.49 1.29 1.75 1.51
12' Series with 23° Trajectory
4' x 15'
90°
Radius 8 8 8 8 8 8 8 8 8 8 8 8
PSI 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75 30-40 40-75
Patterns Prec. GPM Special Width Length Rate* 0.43 4' x 15' 1.38 0.50 4' x 15' 1.61 0.86 4' x 30' 1.38 1.00 4' x 30' 1.61 1.10 9' x 18' 1.31 1.20 9' x 18' 1.43 0.88 4' x 30' 1.41 1.00 4' x 30' 1.61 0.09 2' x 6' 1.44 0.10 2' x 6' 1.61 0.50 4' x 18' 1.34 0.59 4' x 18' 1.58
61
TORO TVAN VARIABLE ARC NOZZLES ADJUSTABLE NOZZLE
INFINITELY ADJUSTABLE FROM 0° - 360°
570 Variable Arc Nozzle Performance Data Pattern
PSI
90°°
20 30 40 50 20 30 40 50 20 30 40 50 20 30 40 50
180°
8'
TVAN-8
10'
TVAN-10
12'
TVAN-12
15'
TVAN-15
17'
270°
360°
Specifications TVAN-17
8' Series GPM Rad 0.58 7 0.71 8 0.82 9 0.92 9 0.81 7 0.99 8 1.15 8 1.28 9 1.08 7 1.33 8 1.53 8 1.70 9 1.25 7 1.52 8 1.75 9 1.96 9
10' Series GPM Rad 0.59 9 0.72 10 0.84 10 0.94 10 0.94 9 1.15 10 1.33 10 1.49 10 1.37 9 1.67 10 1.92 10 2.15 10 1.73 9 2.11 10 2.42 10 2.69 10
12' Series GPM Rad 0.76 10 0.93 12 1.07 12 1.21 13 1.35 10 1.65 12 1.91 12 2.13 13 1.90° 11 2.32 12 2.68 12 2.99 12 2.27 10 2.77 12 3.12 12 3.47 12
15' Series GPM Rad 1.06 15 1.29 15 1.49 16 1.66 16 1.71 14 2.08 15 2.40 15 2.68 15 2.41 14 2.94 15 3.38 15 3.77 16 2.69 13 3.26 15 3.79 15 4.33 16
PRN Visual Arc Adjustment
17' Series GPM Rad 1.25 16 1.46 17 1.68 18 1.87 18 1.95 15 2.38 17 2.74 17 3.06 18 2.69 14 3.28 17 3.76 17 4.19 18 3.05 17 3.73 17 4.26 18 4.71 18
Operating Specifications • Radius: 14’-26’ (4,3-7,9m) • Operating pressure range: 20-75 psi (1,4-5,2 Bar) Specifications • Recommended Pressure: 40-50 psi (2,8-3,5 Bar) Specifications •Operating Flow Rate: 0.17-3.68 GPM (1,4-14 LPM)
PRN Visual Arc Adjustment IRRITROL I-PRO 9’ STRIP NOZZLES • Radius: 14’-26’ (4,3-7,9m) GREAT FOR SMALL STRIPS 9’ STRIP Additional Features
• OperatingNOZZLES pressure range: 20-75 psi (1,4-5,2 Bar) •• 15 unique streams with different trajectories 9' Series with 20° Trajectory Recommended Pressure: 40-50 psi (2,8-3,5 Bar) •• Maximum height of 20° trajectory fight through wind Flow Rate: 0.17-3.68 GPM (1,4-14 to LPM) WxL Flow Pressure Nozzle andpsi • Threads onto nearly all sprayheads shrub adapters ft. GPM Additional Features (male or female) 3x8 0.41 IPN-9EST 20 •• Pre-attached screenwith for easy installation ision™ Series Rotating 30 4x9 0.45 15 unique streams different trajectories •• Radius reduction by turning set through screw 90° 40 5 x 10 0.48 Maximum heightup of to 20°25% trajectory to fight wind am Nozzles 20 x 16 0.85 •• Color coded identify adjustable full circle3adapters IPN-9CSTor Threads ontotonearly all sprayheads and shrub 30 on 4square x 18 0.90° 4' x 18' CENTRE IPN-9CST • Precipitation rate = 0.55”/hr. (14 mm/hr.) (male or female) 40 5 x 20 0.97 spacing plans screen for easy installation20 3 x 16 0.85 4' x 9' END • Pre-attached IPN-9EST IPN-9SST • Maintains precipitation rate as is30 reduced Radius reduction up to 25% byradius turning set screw 90° 0.90° 4 x 18 r4' x 18' SIDE IPN-9SST • Matched precipitation 14-26 or feet (4,3-7,9m) 40 5 x 20 0.97 Color coded to identifyfrom adjustable full circle •• Matched precipitation from 20-75 psi (1,4-5,2 Bar) Precipitation rate = 0.55”/hr. (14 mm/hr.) on square • Adjustable by hand or with included tool spacing plans •• Consistent speed of rotation not affected by pressure Maintains precipitation rate as radius is reduced
Irrigation
e
al
wns.
• Matched precipitation from 20-75 psi (1,4-5,2 Bar) •• Five years by hand or with included tool Adjustable • Consistent speed of rotation not affected by pressure
Gear-Driven Precision Series Rotating Stream Nozzles utilise a proven Warranty planetary gear•drive, variable stator and turbine to rotate the Five years nozzle. PRECISION PRECISION STREAM STREAM Precision Series Rotating Nozzle Model List FEMALE MALE
etary
ne e ms.
of ed ed cs.
dard
up.
Description
• PRN-TA
Toro Threaded, 14-26 feet (4,3-7,9m),
• PRN-TF Male Threaded
Toro Threaded, 14-26 feet (4,3-7,9m), Description Full-Circle
• PRN-TA Female Threaded
Toro Threaded, 14-26 feet (4,3-7,9m), Description Adjustable PRN-TF from 45°-270° Threaded, 14-26 feet (4,3-7,9m), Toro Threaded, 14-26 feet (4,3-7,9m), Adjustable from 45°-270° Full-Circle Threaded, 14-26 feet (4,3-7,9m), Description Full-Circle
Adjustable fromNozzle 45°-270° Precision Series Rotating Model List
45° - 270° 360°
PRN-A
PRN-F • PRN-A
• PRN-TF
• PRN-F Female Threaded • PRN-A
low ng
his
Male Threaded
• PRN-F
62
PRN-TA
Threaded, 14-26 feet (4,3-7,9m), Adjustable from 45°-270° Threaded, 14-26 feet (4,3-7,9m), Full-Circle
Right 180° edge working pattern
Right edge The unique adjustment method allows for pre-setting of arc by hand or tool before the nozzle is installed. Visual indicators allow the user to quickly adjust the arc pattern to the desired arc from 45-270°. The adjustment band can be adjusted by hand or with the pre-included tool. The unique adjustment method allows for pre-setting of arc by
hand or tool before the nozzle is installed. Visual indicators allow the user to quickly adjust the arc pattern to the desired arc from 45-270°. The adjustment band can be adjusted by hand or with the pre-included tool.
Performance Data—Precision™ Series Rotating Nozzles—US
TORO PRECISION™ STREAM NOZZLES • Matched precipitation from 14-26 feet (4,3-7,9m) Warranty
180° working pattern
Arc
PSI
GPM
Radius
20 0.17 14.0 30 0.19 15.0 40 0.25 17.0 Performance Data—Precision™ Series 45° 50 0.31 18.5 60 0.35 19.5 Arc PSI GPM Radius 75 0.43 22.0 20 0.43 16.0 0.17 14.0 30 0.49 17.5 0.19 15.0 40 0.62 20.5 0.25 17.0 90° 45° 50 0.75 22.5 0.31 18.5 60 0.82 23.5 0.35 19.5 75 0.92 25.0 0.43 22.0 20 0.48 16.4 0.43 16.0 30 0.57 17.5 0.49 40 0.78 20.2 0.62 20.5 120° 90° 50 0.97 22.5 0.75 60 1.07 23.5 0.82 75 1.18 25.0 0.92 20 0.83 15.0 0.48 16.4 30 0.94 17.0 0.57 17.5 40 1.22 20.5 0.78 20.2 180° 120° 50 1.46 22.5 0.97 60 1.61 24.0 1.07 23.5 75 1.81 26.0 1.18 25.0 20 1.12 15.0 0.83 30 1.27 17.0 0.94 40 1.56 20.0 1.22 20.5 240° 180° 50 1.80 21.5 1.46 22.5 60 1.95 22.5 1.61 24.0 75 2.20 24.0 1.81 26.0 20 1.08 14.0 1.12 15.0 30 1.23 16.0 1.27 17.0 40 1.62 19.0 1.56 20.0 270° 240° 50 2.00 21.5 1.80 60 2.26 23.0 1.95 22.5 75 2.60 25.0 2.20 24.0 20 1.81 15.0 1.08 14.0 30 2.00 17.2 1.23 16.0 40 2.56 20.9 1.62 19.0 270° 360° 50 3.09 22.9 2.00 21.5 60 3.34 23.8 2.26 23.0 2.60 25.0 75 3.68 25.6 20 1.81 15.0 30 2.00 17.2 40 2.56 20.9 360° 50 3.09 22.9 60 3.34 23.8 75 3.68 25.6
Precip.Rate (in./hr.)
0.67 0.77 0.65 0.75 0.67 Nozzles—US 0.77 Rotating 0.70 0.81 Precip.Rate Precip. 0.71 0.82Rate 0.68 0.79 (in./hr.) (in./hr.) 0.65 0.75 0.67 0.77 0.62 0.71 0.65 0.75 0.57 0.66 0.67 0.77 0.57 0.66 0.70 0.81 0.57 0.66 0.71 0.82 0.57 0.65 0.68 0.79 0.69 0.79 0.65 0.75 0.72 0.83 0.62 0.71 0.55 0.64 0.57 0.66 0.55 0.64 0.57 0.66 0.56 0.65 0.57 0.66 0.55 0.63 0.57 0.65 0.71 0.82 0.69 0.79 0.63 0.72 0.72 0.83 0.56 0.65 0.55 0.64 0.56 0.64 0.55 0.54 0.62 0.56 0.65 0.52 0.60 0.55 0.63 0.72 0.83 0.71 0.82 0.63 0.73 0.72 0.56 0.65 0.56 0.65 0.64 0.56 0.64 0.54 0.62 0.55 0.64 0.52 0.60 0.71 0.81 0.72 0.83 0.62 0.71 0.63 0.73 0.57 0.66 0.56 0.65 0.55 0.64 0.56 0.65 0.55 0.63 0.56 0.64 0.53 0.61 0.55 0.64 0.77 0.89 0.71 0.81 0.65 0.75 0.62 0.71 0.56 0.65 0.57 0.66 0.57 0.65 0.55 0.64 0.57 0.66 0.55 0.63 0.53 0.61 0.54 0.62 0.77 0.89 Nozzle change. 0.65 data subject to 0.75 0.56 0.65 0.57 0.65 0.57 0.66 0.54 0.62
Specifying Information—Precision Series Rotating Nozzle PRN-XX
Precip. Rate (in./hr.)
PRECISION™ SERIES SPRAY NOZZLES Toro’s new Precision Series Spray Nozzles are the most complete and efficient spray nozzle line available to help irrigation professionals manage water use, eliminate runoff and reduce customer water bills. The Precision Spray nozzles 1”/ hr precipitation rate ensures that water is applied more slowly and evenly without sacrificing landscape health. These nozzles are available in a wide selection of arcs and radii, as well as male and female threads, making them ideal for ™ large scale installations and retrofits.
PRECISION SERIES SPRAY NOZZLES The “O” Advantage
TimePrecision Savings Spray nozzles deliver an industry first
™ 1”/hr precipitation is significantly All Precision Series Spray Nozzlesrate can which be combined on the same zone less than traditional spray nozzles. On retrofits for greater designPRECISION and installation™flexibility, which equates to time SERIES SPRAYbetween NOZZLES for water savings, the 1:1 relationship savings on the job site. Whether a new installation or retrofit project, popular spray nozzles™ and Precision Spray nozzlesprocess meets the needs of any the comprehensive rangemake of Precision nozzles will the retrofit straight Time Savings projectAll forward, and all Series models available in Toro threads. accurate and less since Precision Spray are Nozzles can be combined ontime the(Male) sameconsuming zoneand Female
5’
8’
10’
12’
™
for greater design andarc installation flexibility, which equates to time adjustment is eliminated. savings Plus on the job site. and Whether a new installation or retrofit project, Nine Arcs, Side Center Strips Available the comprehensive range of Precision™ nozzles meets the needs of any project and all models are available in Toro (Male) and Female threads. Nine Arcs, Plus Side and Center Strips Available
60°
90°/Q 60°
120°/T
90°/Q
120°/T
150° 150°
210°
8’
10’ Side and Corner Strips Available 12’
4’ X 15’ 4’ X 9’
Side and Corner Strips Available
180°/H
180°/H
5’
210°
240°/TT 270°/TQ 360°/F 4’ X 15’
4’ X 30’ 4’ X 18’
15’
4’ X 30’ 4’ X 18’
LCS X 15’ (Left Corner4’4’Strip) X 9’
™
SST (Side Strip)™
(Left Corner Strip)
(Side Strip)
New technology prevents inconsistant spray patterns like this.
PRECISION SERIES SPRAY NOZZLES 8’ Radius
10’ Radius
12’ Radius
15’ Radius
Side and Corner Strips
Model Radius Model PSI GPM Radius Model PSI GPM Radius Model PSI GPM Radius Model PSI GPM Radius (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) (ft) (O-XX-XX) PSI GPM (ft) 20 0.35 14.0 20 0.24 11.5 20 0.16 9.5 20 0.10 7.6 20 0.04 4.7 ™ 30 0.39 15.0 30 0.25 12.0 30 0.17 10.0 30 0.11 8.0 30 0.04 5.0 15-60 12-60 10-60 8-60 5-60 40 0.40 15.1 40 0.26 12.1 40 0.18 10.0 40 0.12 8.1 40 0.04 5.0 ™ 50 0.42 15.3 0.28 12.2 50 PERFORMANCE 0.19 10.0 50 0.13 8.3 50 0.05 5.3 DATA 50 – PRECISION SERIES SPRAY NOZZLES 20 0.53 14.2 20 0.26 9.5 20 0.14 7.0 20 0.06 4.6 20 0.34 12.0 Precip. 30 0.58 30 0.23 model 10.0 # 30 0.17 8.0 30 0.06 5.0 30 0.37 Precip. 12.1 model # 15.0 15-Q 12-Q 10-Q 8-QModel 5-Q Model Radius psi Arc psi gpm Radius Rate Rate Model 40 (O-XX-XX) 0.60 PSI 15.1 40 0.28 10.2 40 0.18PSI8.2 GPM Radius 0.06 Radius 5.0 0.39 11.4 (O-XX-XX) PSI40 GPM PSI 40GPM n (in./hr.) (in./hr.) (O-XX-XX) (O-XX-XX) (ft) 50 0.61 15.3 50(ft)0.28 (O-XX-XX) 10.3 50 0.18 8.4 50 0.07 5.0 50 0.39 12.0 (ft) 20 20 0.04 1.0 1.2 20 0.72 14.3 20 0.31 9.5 20 0.20 7.6 20 0.07 4.4 20 4.7 0.46 11.5 20 2030 0.16 9.5 20 8.0 0.10 7.6 20 300.04 4.7 15.0 30 0.34 10.0 30 0.22 0.09 5.0 0.49 12.0 30 30 0.04 5.0 1.0 1.2 30 0.77 15-T 10-T 5-T 12-T 8-60 30 5-60 40 0.81 15.3 40 10.0 0.09 5.2 40 0.51 12.2 30 0.17 10.0 8.00.36 30 400.04 5.0 8-T 40 0.2330 8.2 0.11 60º 40 40 0.04 5.0 1.0 1.2 12-60 8-60 50 0.82 15.4 50 0.37 10-60 10.0 50 0.24 8.3 50 0.09 5.4 50 0.52 12.3 50 50 40 0.05 0.18 5.3 1.010.0 1.1 40 40 7.5 0.12 8.1 40 200.04 5.0 20 0.92 14.7 20 0.41 9.8 20 0.25 0.07 4.0 20 0.60 11.6 20 20 0.06 4.6 1.0 1.2 30 0.96 50 15.0 30 0.43 10.0 0.11 5.0 0.62 12.010.0 5030 0.19 50 300.05 5.3 8-150 30 0.2750 8.0 0.13 15-150 10-150 8.3 5-150 12-150 30 30 0.06 5.0 1.0 1.1 40 1.00 15.2 40 0.44 10.2 40 0.28 8.1 40 0.12 5.2 40 0.63 12.2 8-Q 20 5-Q 20 0.26 9.5 20 0.14 7.0 20 500.06 4.6 40 40 0.07 1.0 1.2 50 1.10 15.3 50 0.46 10.4 50 0.29 8.2 0.13 5.4 50 5.0 0.64 12.3 90º 14.5 20 20 0.2630 7.0 0.17 0.10 4.4 20 0.23 0.70 11.5 50 50 30 0.07 5.0 1.010.0 1.2 20 1.10 30 8.00.48 9.7 30 200.06 5.0 30 1.16 15.0 30 0.51 10.0 30 0.33 8.0 30 0.13 5.0 30 4.4 0.74 12.0 12-Q 10-Q 8-Q 20 20 0.07 1.0 1.2 15-H 10-H 5-H 8.20.55 10.3 12-H4040 0.28 40 400.06 5.0 8-H 40 0.3440 8.0 0.18 40 1.25 40 15.4 40 0.14 5.1 0.79 12.310.2 30 30 0.09 5.0 1.0 1.2 50 1.28 15.5 50 0.56 10.4 50 0.34 8.0 50 0.14 5.2 50 0.80 12.4 8-T 5-T 50 0.28 10.3 50 0.18 8.4 50 0.07 5.0 5040 40 0.09 5.2 1.0 1.2 20 1.15 14.5 20 120º 0.56 9.8 20 0.33 7.6 20 0.10 4.4 20 0.76 11.6 50 50 20 0.10 5.4 1.0 9.5 1.1 30 1.20 20 20 300.07 4.4 15.0 307.60.58 10.0 30 0.3620 8.0 0.20 0.15 5.2 30 0.31 0.82 12.0 15-210 10-210 8-210 5-210 12-210 20 20 0.07 4.0 1.0 1.2 40 1.30 15.5 40 0.60 10.4 40 0.37 8.1 40 0.16 5.3 0.84 12.3 3040 0.34 10.0 30 8.2 0.22 508.00.62 10.5 30 500.09 5.0 30 1.40 15.6 50 0.38 0.17 5.5 50 5.0 0.85 12.4 30 30 0.11 1.0 1.2 50 10-T 8-T 12-T 8-150 5-150 14.5 20 0.63 9.6 20 0.3440 7.0 0.23 0.14 4.3 20 0.36 0.90 11.4 8.2150º 40 200.09 5.2 40 40 40 0.12 5.2 1.010.0 1.2 20 1.45 40 30 1.54 15.0 30 0.69 10.0 0.44 0.17 5.0 30 0.99 12.0 50 50 50 0.13 0.37 5.4 1.010.0 1.2 15-TT 10-TT 5-TT 12-TT 50 8.0 0.24 8.3 50 30 0.09 5.4 8-TT 30 50 40 1.58 15.2 40 0.73 10.3 40 0.46 8.0 40 0.19 5.0 40 1.04 12.3 20 20 0.10 4.4 1.0 1.2 50 1.61 20 15.3 507.50.74 10.4 50 0.4620 8.0 0.25 0.19 5.0 1.05 12.4 9.8 2050 0.41 20 500.07 4.0 30 30 0.13 5.0 1.0 1.2 20 1.72 14.5 20 0.71 9.5 20 0.41 7.2 20 0.15 4.3 20 1.05 11.4 8-H 5-H 8.0180º 30 300.11 5.0 40 40 30 0.14 5.1 1.010.0 1.2 30 1.78 30 15.0 30 0.79 10.0 30 0.4930 8.0 0.27 0.20 5.0 30 0.43 1.15 12.0 10-150 15-TQ 12-150 10-TQ 8-TQ8-150 5-TQ 12-TQ 15.0 408.10.84 10.3 40 0.5440 8.0 0.28 0.21 5.0 40 0.44 1.19 12.2 50 50 40 0.14 5.2 1.010.2 1.1 40 1.82 40 40 400.12 5.2 50 1.90 15.3 50 0.86 10.4 50 0.55 8.0 50 0.22 5.0 50 1.22 12.3 20 20 0.10 4.4 1.0 1.2 5020 0.46 8.20.95 9.6 50 200.13 5.4 20 2.20 50 14.5 20 20 0.5550 7.0 0.29 0.17 4.0 1.35 11.510.4 30 30 0.15 5.2 1.1 1.2 30 2.31 15.0 307.01.03 10.0 0.26 5.0 30 1.48 12.0 9.7 8-210 20 5-210 20 300.10 4.4 8-F 30 0.6620 8.0 0.26 15-F 10-F 5-F 12-F 40 40 20 0.16 0.48 5.3 1.1 1.3 40 2.35 15.2 40 210º 1.08 10.3 40 0.68 8.0 40 0.26 5.0 40 1.59 12.4 50 50 30 0.17 5.5 1.110.0 1.3 50 2.40 30 8.01.12 10.4 30 500.13 5.0 15.3 50 50 0.7130 8.0 0.33 0.26 5.0 50 0.51 1.60 12.5
PRECISION SERIES SPRAY NOZZLES 5’ Radius Model (O-XX-XX) 5-60
5-Q
5-T
5-150
5-H
8’ Radius
5' PRECISION
10’ Radius
12’ Radius
5' PRECISION MALE
Model Radius (O-XX-XX) PSI GPM (ft) 20 0.62 4x28 4X30 30 0.66 4x30 SST 40 0.67 4x30 50 0.68 DATA 4x30– PRECISION™ SERIES SPRAY NOZZLES PERFORMANCE 20 0.32 4x15 Precip. 4x15 Precip. Precip. Precip. Precip. Precip. Precip. Precip. 0.33 4X15 30 model # model # model Rate # Model model # Model Radius Radius Radius gpm Ratepsi gpm RateRadius gpm Radius RateRadius ArcRadius Rate psi Rate psi gpm Rate Rate LCS 40 0.34 4x15 (O-XX-XX) (O-XX-XX) (O-XX-XX) PSI GPM GPM (O-XX-XX) PSI n GPM n (in./hr.) (in./hr.) (in./hr.) (in./hr.) (in./hr.) (ft) 4x15(O-XX-XX) n (in./hr.) (in./hr.) (ft) n (in./hr.) (O-XX-XX) (ft) 50 0.34 0.10 7.620 0.32 1.0 204x15 1.2 4.7 20 0.16 9.5 1.0 1.2 0.04 1.2 201.0 0.35 14.0 1.0 20 0.101.2 7.6 0.24 11.5 20 0.62 4x28 4X15 8.030 0.33 0.11 1.0 304x15 1.1 5.0 10.0 1.0 30 0.11 1.1 8.0 1.0 1.1 0.04 1.0 30 0.17 1.2 10-60 8-60 5-60 RCS 40 0.34 4x15 30 0.39 15.0 0.25 12.0 30 0.66 4x30 10-60 4X30 0.1260º 8.1 1.1 40 0.04 1.2 5.0 10.0 1.0 40 1.2 8.1 0.12 1.1 1.2 1.0 40 0.18 1.2 15-60 50 0.34 4x15 0.13 1.1 50 0.05 1.3 5.3 50 0.19 10.0 1.3 8.3 0.13 1.1 1.3 1.1 401.0 0.40 15.1 1.1 50SST 0.268.320 12.1 40 0.67 4x30 0.36 4X18 0.14 7.0 1.1 20 0.06 20 0.26 9.5 1.1 1.3 1.2 0.37 4X181.3 4.6 4X18 30 12.2 501.0 0.42 15.3 1.0 20 0.141.1 7.0 0.28 50 0.68 4x30 0.17 1.0 304X18 1.1 5.0 10.0 1.0 30 0.17 1.2 8.0 1.0 1.1 0.06 1.0 30 0.23 1.1 SST 8.040 0.38 10-Q 8-Q 5-Q 201.0 0.53 14.2 20 0.32 4x15 10-Q 0.34 12.0 0.18 1.0 404X18 1.2 5.0 40 0.28 1.2 1.0 40 0.18 1.2 8.2 1.0 1.2 0.07 1.2 90º 8.250 0.38 0.18 0.18 1.0 50 4X9 1.1 5.0 50 0.28 1.3 1.2 8.4 0.18 1.0 1.1 0.07 1.2 301.0 0.58 15.0 1.0 50 30 0.33 4x15 0.378.420 12.1 4X15 15-Q 4X9 7.630 0.19 0.20 1.0 20 4X9 1.2 4.4 20 0.31 9.5 1.1 7.6 0.07 1.2 0.20 1.0 1.2 401.0 0.60 15.1 1.0 20LCS 40 0.34 4x15 0.39 LCS 40 11.4 0.20 4X9 0.22 8.0 1.0 30 0.09 1.1 5.0 10.0 1.0 30 0.22 1.1 8.0 1.0 30 0.34 1.2 1.0 1.1 50 0.20 4X9 10-T 5-T 8-T 50 0.61 15.3 50 0.34 4x15 10-T 0.39 12.0 0.23 1.0 40 0.09 10.0 1.0 40 0.23 1.2 8.2 1.0 40 0.36 1.2 1.0 1.1 120º 8.220 0.18 4X9 1.1 5.2 0.24 1.0 50 4X9 1.1 5.4 50 0.37 10.0 0.10 1.1 1.0 1.1 201.0 0.72 14.3 1.1 50 0.241.2 8.3 20 0.32 4x15 0.46 0.19 4X9 8.330 11.5 RCS 7.540 0.20 0.25 1.0 20 4X9 1.2 4.0 20 0.41 9.8 1.1 7.5 0.25 1.0 1.2 0.07 1.2 301.0 0.77 15.0 1.0 20 30 0.33 4x15 0.49 12.0 4X15 0.27 8.050 0.20 1.0 30 4X9 1.1 5.0 10.0 1.0 30 0.27 1.1 8.0 1.0 1.1 0.11 1.0 30 0.43 1.2 15-T
15’ Radius
8' TORO PRECISION
O-560
OT-560
60°
O-860
OT-860
90°
O-5Q
OT-5Q
90°
O-8Q
OT-8Q
120°
O-5T
OT-5T
150°
O-5150
OT-5150
180°
O-5H
OT-5H
210°
O-5210
OT-5210
240°
O-5TT
OT-5TT
8-H
10-H 20 0.14 40 8.0 30 0.17 5-TT 0.34 8.0 40 50 0.19 240º 50 20 0.19 0.33 7.6 20 0.15 30 0.36 8.0 30 0.20 10-210 5-TQ 0.37 8.1 40 40 0.21 50 50 0.22 0.38 8.2270º 20 0.17 20 0.34 7.0 30 0.26 5-F 30 0.44 8.0 40 0.26 10-TT 360º 50 40 0.26 0.46 8.0 50 0.46 8.0 22 20 0.41 7.2 30 0.49 8.0 C-Sprays-2018-2019.indd 22 10-TQ 40 0.54 8.0 50 0.55 8.0
40 0.34 OT-5TQ
50 OT-5F 20 30 8-210 40 50 20 30 8-TT 40 50 20 30 8-TQ 40 50
0.81 40 0.44 1.2 0.29 1.0 50 0.13 1.2 5.4 50 0.46 1.2 501.0 0.82 0.528.2 12.3 0.26 7.0 1.0 20 0.10 1.2 4.4 20 0.48 150° O-8150 OT-8150 201.0 0.921.2 0.60 11.6 Precipitation rate (50% 0.33 8.0 1.0 1.1 30 0.51 30 0.13 5.0 1.0 1.2 square spacing): 1” per 10-H 5-H 301.0 0.96 0.62 12.0 0.34 8.0 after 1.0 1.2 5.1 40 0.55 hour radius 40 0.14 1.2 180º even 15-150 180° O-8H OT-8H reduction 20%. 0.34 8.0 of12.2 1.0 50 0.14 1.2 5.2 50 0.56 401.0 1.00 1.1 0.63 0.33 1.1 20 0.10 1.3 4.4 1.2 501.0 20 1.100.56 0.647.6 O-8210 12.3 210° OT-8210 0.36 8.0 1.1 30 0.15 1.3 5.2 30 0.58 1.1 1.2 10-210 201.1 40 1.100.60 0.708.1 5-210 11.5 0.37 1.1 40 0.16 1.3 5.3 1.3 210º 240° OT-8TT 0.38 1.1 50 0.17 1.3 5.5 0.62 301.1 50 1.16 1.3 0.748.2 O-8TT 12.0 15-H 12-H 20 0.34 1.0 20 0.14 1.2 4.3 20 0.63 1.3 1.3 401.1 1.25 40 0.797.0 O-8TQ 12.3 270° OT-8TQ 30 0.44 8.0 1.0 30 0.17 1.1 5.0 1.1 1.0 30 0.69 1.1 8-TT 50 10-TT 501.1 1.28 0.808.0 5-TT 12.4 40 0.46 1.0 40 0.19 1.2 5.0 40 0.73 1.2 1.2 240º 360° OT-8F 50 0.46 1.0 50 0.19 1.2 5.0 1.3 201.1 50 1.150.74 1.3 20 0.768.0 O-8F 11.6 1.0 20 0.15 1.1 4.3 20 0.71 1.2 1.2 301.0 1.20 3020 0.41 0.827.2 12.0 30 0.49 8.0 1.1 30 0.20 1.1 30 0.79 1.2 12-210 15-210 5.0 1.0 1.2 8-TQ 40 10-TQ 401.1 1.30 0.848.0 5-TQ 12.3 40 0.54 1.1 40 0.21 1.2 5.0 40 0.84 1.2 1.2 270º 8.0 1.1 50 0.22 1.2 5.0 50 0.86 1.3 501.1 1.40 5050 0.55 0.85 12.4 1.3 1.1 20 0.17 1.2 4.0 20 0.95 1.2 1.2 201.0 1.45 2020 0.55 0.907.0 11.4 30 0.66 8.0 1.0 30 0.26 1.1 5.0 30 1.03 1.2 1.0 1.2 8-F 30 10-F 301.0 1.54 0.998.0 5-F 12.0 40 0.68 1.0 40 0.26 1.2 5.0 40 1.08 1.2 1.2 15-TT 12-TT 360º 8.0 1.1 50 0.26 1.2 5.0 50 1.12 1.2 401.0 1.58 4050 0.71 1.04 12.3 1.2 50 1.61 50 1.05 12.4 22 20 1.72 20 1.05 11.4 30 1.78 30 1.15 12.0 15-TQ 12-TQ C-Sprays-2018-2019.indd 22 40 1.82 40 1.19 12.2 50 1.90 50 1.22 12.3 5-150 0.51 12.2 0.28 1.0 40 150º 8.1 O-8T 120°
4.3 0.55 5.0 0.56 5.0 5.0 0.56 4.3 0.58 5.0 0.60 5.0 5.0 0.62 4.0 0.63 5.0 0.69 5.0 5.0 0.73 0.74 0.71 0.79 0.84 0.86
1.1
10.3 1.110.4 1.1 9.8 1.0 10.0 1.0 1.110.4 1.110.5 1.0 9.6 1.0 10.0 1.0 1.010.3 10.4 9.5 10.0 10.3 10.4 1.0
1.1 0.12
Side and Corner Strips
8' PRECISION MALE
60°
40 0.14 5.1 270° O-5TQ 50 0.14 5.2 360° 20 0.10O-5F 4.4 30 0.15 5.2 5-210 40 0.16 5.3 50 0.17 5.5 20 0.14 4.3 30 0.17 5.0 5-TT 40 0.19 5.0 50 0.19 5.0 20 0.15 4.3 30 0.20 5.0 5-TQ 40 0.21 5.0 50 0.22 5.0
RCS (Right Corner Strip)
(Right Corner Strip)
™
5’ Radius
4’ X 15’ 4’ X 9’
PRECISION SERIES SPRAY NOZZLES PRECISION SERIES SPRAY NOZZLES LCS SST RCS 4’ X 9’
240°/TT 270°/TQ 360°/F
15’
401.0 OT-8T
5.2
10-150
8-150 RCS1.1 8.1 15.3 40 0.34 4x15 1.0 40 0.28 1.0 1.1 10.4 1.0 1.2 15.4 1.0 50 0.291.1 8.2 50 0.34 4x15 9.7 1.0 20 0.26 1.1 7.0 1.0 1.2 14.7 20 0.36 4X18 10.0 1.0 30 0.33 1.1 8.0 1.0 1.1 8-H 15.0 30 0.37 4X18 4X18 10.3 1.0 40 1.2 8.0 0.34 1.0 1.2 10.4 1.2 8.0 15.2 1.0 50SST 0.34 1.0 1.2 40 0.38 4X18 9.8 1.1 1.3 15.3 1.1 20 0.331.3 7.6 50 0.38 4X18 10.0 1.1 30 0.36 1.3 8.0 1.1 1.3 8-210 14.5 20 0.18 4X9 10.4 1.1 40 0.37 1.2 8.1 1.1 1.3 10.5 1.3 8.2 15.0 1.1 504X9 30 0.19 4X9 0.38 1.1 1.3 9.6 1.1 7.0 0.34 1.0 1.2 15.4 1.0 20LCS 40 0.20 4X9 10.0 1.0 30 0.44 1.2 8.0 1.0 1.1 8-TT 15.5 50 0.20 4X9 10.3 1.0 40 0.46 1.1 8.0 1.0 1.2 10.4 14.5 1.0 50 0.461.1 8.0 20 0.18 4X9 1.0 1.2 9.5 1.1 7.2 0.41 1.0 1.1 15.0 1.0 204X9 30 0.19 4X9 10.0 1.0 30 0.49 1.1 8.0 1.1 1.1 8-TQ RCS1.1 8.0 15.5 40 0.20 4X9 10.3 1.0 40 0.54 1.1 1.2 10.4 15.6 1.0 50 0.551.1 8.0 50 0.20 4X9 1.1 1.2 9.6 1.1 1.2 14.5 1.0 20 0.551.1 7.0 10.0 1.0 30 0.66 1.1 8.0 1.0 1.1 8-F 15.0 10.3 1.0 40 0.68 1.1 8.0 1.0 1.2 10.4 15.2 1.0 50 0.711.2 8.0 1.1 1.2 15.3 Precipitation rate (50% 14.5 square spacing): 1” per hour even after radius 15.0 6/20/18 10:43 AM reduction of 20%. 15.0 15.3
10.2
10-150
10-H
10-210
10-TT
10-TQ
10-F
psi gpm Radius 20
0.16
9.5
30
0.17
10.0
0.18
10.0
40 50
0.19
20
0.26
9.5
30
0.23
10.0
10.0
40
0.28
1.2
50
0.28
1.3
20
0.31
9.5
30
0.34
10.0
40
0.36
10.0
0.37
10.0
50 20
0.41
30
0.43
10.0
40
0.44
10.2
9.8
50
0.46
10.4
20
0.48
30
0.51
10.0
40
0.55
10.3
9.7
50
0.56
10.4
20
0.56
30
0.58
10.0
40
0.60
10.4
50
0.62
9.8
10.5
20
0.63
9.6
30
0.69
10.0
40
0.73
10.3
50
0.74
10.4
20
0.71
9.5
30
0.79
10.0
40
0.84
10.3
50
0.86
10.4
20
0.95
9.6
30
1.03
10.0
40
1.08
10.3
50
1.12
10.4
63
5’
8’
10’
12’
15’
PRECISION™ SERIES PERFORMANCE DATA
PERFORMANCE DATA – PRECISION™ SERIES SPRAY NOZZLES
A – PRECISION™ SERIES SPRAY NOZZLES
gpm Radius
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
0.04
4.7
1.0
1.2
0.04
5.0
1.0
1.2
0.04
5.0
1.0
1.2
0.05
5.3
1.0
1.1
10' PRECI20 0.10 30 0.11 8-60SION
model # psi gpm Radius (O-XX-XX) 7.6 8.0
40
0.12
8.1
50
0.13
8.3
10' PRECI1.0 1.2 1.0 SION1.1 1.1 1.2 MALE 1.1 1.3
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
model # psi gpm Radius (O-XX-XX)
10-60
12' PRECISION
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
20
0.16
9.5
1.0
1.2
30
0.17
10.0
1.0
1.1
40
0.18
10.0
1.0
1.2
50
0.19
10.0
1.1
1.3
12' PRECISION MALE
model # psi gpm Radius (O-XX-XX)
Arc
12-60
60º
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
20
0.24
11.5
1.0
1.2
30
0.25
12.0
1.0
1.2
0.26
12.1
40
0.4
12.2
1.1
1.3
50
0.4
12.0
1.0
1.2
20
0.5
12.1
1.0
1.1
30
0.5
40
0.6
1.0
1.2
4.6
1.0
1.2
20
0.14
7.0
1.1
1.3
20
0.26
9.5
1.0
1.1
5.0
1.0
1.1
30
0.17
8.0
1.0
1.1
30
0.23
10.0
1.0
1.2
30
0.37
0.07
5.0
1.0
1.2
40
0.18
8.2
1.0
1.2
40
0.28
1.2
1.0
1.2
40
0.39
11.4
1.0
1.2
0.07
5.0
1.0
1.2
50
0.18
8.4
1.0
1.1
50
0.28
1.3
1.0
1.2
50
0.39
12.0
1.0
1.1
90º
0.3
0.3
0.28
0.06
12-Q
20 30
0.34
0.06
10-Q
15-60
50
40 20
8-Q
model # psi gp (O-XX-XX)
15-Q
50
0.
0.07
4.4
1.0
1.2
20
0.20
7.6
1.0
1.2
20
0.31
9.5
1.0
1.1
20
0.46
11.5
1.0
1.2
20
0.7
0.09
5.0
1.0
1.2
0.22
8.0
1.0
1.1
30
0.34
10.0
1.0
1.1
30
0.49
12.0
1.0
1.1
30
0.7
0.09
5.2
1.0
60° 1.2
30
40
0.36
10.0
1.0
1.2
40
0.51
12.2
1.0
1.1
0.10
5.4
1.0
1.1
50
0.24
8.3
1.0
1.1
50
0.37
10.0
1.1
1.2
50
0.52
12.3
1.0
1.1
0.07
20
0.60
30
0.27
8.0
1.0
1.1
4.0
1.0
0.11
5.0
1.0
0.12
5.2
1.0
0.13
5.4
1.0
0.10
4.4
1.0
0.13
5.0
1.0
0.14
5.1
1.0
0.14
5.2
1.0
0.10
4.4
1.0
0.15
5.2
1.1
0.16
5.3
1.1
0.17
5.5
1.1
0.14
4.3
1.1
90° 1.2
8-T O-1060 40 0.23
O-10Q 20 0.25
1.2
8-150 40 0.28 1.2 120° O-10T 50
1.2
0.29
20 0.26 1.2 150° O-10150 1.2
8-210
8.2 7.0
30
0.33
8.0
0.34
8.0
20 0.33 1.2 210° O-10210 30 0.36 1.2
240° O-10TT 50 0.38 1.3 1.3
7.5 8.1
40
180° O-10H 50 0.34 1.1 8-H
1.2
8.2
40
0.37
270° O-10TQ 30 0.44 1.1 20
8.0 7.6 8.0 8.1 8.2
0.34
7.0
360° O-10F 50 0.46 1.3
8.0
1.3
0.17
5.0
1.0
0.19
5.0
1.1
0.19
5.0
1.1
0.15
4.3
1.0
1.2
0.20
5.0
1.0
1.2
8-TT
1.2
40
8-TQ
0.46
8.0 8.0
OT-1060 1.0 1.1
10-T
OT-10Q 1.0 1.2 1.0 1.1 OT-10T 1.0
20 10-150
1.2
1.0 1.2 OT-10150 1.0
1.1
1.0
1.2
OT-10H 1.0 1.2
10-H
OT-10TT 1.1 1.3
10-210
1.1 1.3 OT-10210 1.1 1.3 1.1
1.3
OT-10TQ 1.0 1.1 1.0
OT-10F 1.0 1.2 1.0
1.2
20
0.41
7.2
1.0
1.1
30
0.49
8.0
1.1
1.1
10-TT
10-TQ
9.8
1.0
1.1
30
0.43
10.0
1.0
1.1
40
0.44
10.2
1.0
1.1
50
0.46
10.4
1.0
1.1
20
0.48
9.7
1.0
1.1
30
0.51
10.0
1.0
1.1
40
0.55
10.3
1.0
1.2
50
0.56
10.4
1.0
1.2 1.3
20
1.2
0.41
0.56
9.8
1.1
30
0.58
10.0
1.1
1.3
40
0.60
10.4
1.1
1.2
50
0.62
10.5
1.1
1.3
20
0.63
9.6
1.0
1.1
30
0.69
10.0
1.0
1.2
40
0.73
10.3
1.0
1.1
50
0.74
10.4
1.0
1.1
20
0.71
9.5
1.0
1.1
30
0.79
10.0
1.0
1.1
40
0.54
8.0
1.1
1.2
40
0.84
10.3
0.22
5.0
1.1
1.3
50
0.55
8.0
1.1
1.2
50
0.86
10.4
1.0
1.1
0.17
4.0
1.0
1.2
20
0.55
7.0
1.1
1.2
20
0.95
9.6
1.0
1.1
0.26
5.0
1.0
1.2
0.26
5.0
1.0
1.2
0.26
5.0
1.0
1.2
0.21
5.0
1.1
1.2
8-F
0.66
8.0
1.0
1.1
0.68
8.0
1.0
1.2
50
0.71
8.0
1.1
1.2
10-F
O-1260 O-12Q
OT-12Q
O-12T
OT-12T
150°
O-12150 OT-12150
180°
O-12H
OT-12H
210°
O-12210
OT-12210
30
1.03
10.0
1.0
1.1
1.08
10.3
1.0
1.1
50
1.12
10.4
1.0
1.2
12-H
180º
O-12TT
OT-12TT
270°
O-12TQ
OT-12TQ
360°
O-12F
OT-12F
12-210 210º
11.6
1.0
1.2
30
0.62
12.0
1.0
1.1
40
0.63
12.2
1.0
1.1
50
0.64
12.3
1.0
20
0.70
11.5
1.0
5’
8’
15' PRECISION
15' PRECISION MALE
40
0.8
50
0.8
20
0.9
30
0.9
1.0
1.1
50
1.1
1.2
20
30
0.74
12.0
1.0
1.1
0.79
12.3
1.0
1.2
50
0.80
12.4
1.0
1.2
15-150
15-H
12-TT 240º
12’
1.1
1.2
50
1.2
20
0.76
11.6
1.1
1.3
30
0.82
12.0
1.1
1.3
40
0.84
12.3
1.1
1.2
40
1.3
50
0.85
12.4
1.1
1.2
50
1.4
20
0.90
11.4
1.0
1.2
20
1.4
30
0.99
12.0
1.0
1.1
30
1.5
40
1.04
12.3
1.0
1.1
40
1.5
15-210
15-TT
60° 50 1.0590°12.4 120°1.0 150° 1.1 180°
270º
30 40
1.05
11.4 4’ X 15’ 1.15 12.0 4’ X 9’ 1.19 LCS 12.2
1.0 1.0 1.0
50 12.3Strip) 1.0 (Left1.22 Corner
15’ 12-F 360º
1.1
30 40 20
1.1
30
1.2
Nine Arcs, Plus Side and Center Strips Available
12-TQ
10’
15-T
40
40
20
210°
1.2
4’ X 30’ 1.2 4’ X 18’ 15-TQ 1.2 SST
1.2Strip) (Side
20
1.35
11.5
1.0
1.1
30
1.48
12.0
1.0
1.1
40
1.59
12.4
1.0
1.1
50
1.60
12.5
1.0
1.1
240° 50 1.6 20
1.7
30
1.7
40 RC 1.8 50Corn 1.9 (Right 20
15-F
2.2
30
2.3
40
2.3
50
2.4
PERFORMANCE DATA – PRECISION™ SERIES SPRAY NOZZLES
60° Arc 90°
Nine Arcs, Plus Side and Center Strips Available
120°60º 60°
5’
8’
90°
120°
150°
180°
4’ X 15’ 4’ X 9’
10’
240°
4’ X 30’ 4’ X 18’
LCS (Left Corner Strip)
12’
210°
SST (Side Strip)
270°
360°
150° 180°90º
4’ X 15’ 4’ X 9’
210°
RCS (Right Corner Strip)
15’
240° 120º 270° 360° 150º
O-1560
Precip. Precip. OT-1560 Rate Rate
O-15Q 20 0.24
11.5
OT-15Q 1.0 1.2
O-15T 40 0.26
30
12.0
50
12.2
model # psi gpm Radius (O-XX-XX)
12-60
0
0.24
11.5
1.0
1.2
0
0.25
12.0
1.0
1.2
0
0.26
12.1
1.0
1.2
0
0.28
12.2
1.1
1.3
0.34
0
0.37
12.0
1.0 1.0
1.1
0
0.39
11.4
1.0
1.2
0
0.39
12.0
1.0
1.1
0
0.46
11.5
1.0
1.2
0
0.49
12.0
0
0.51
12.2
0
0.52
12.3
0
0.60
11.6
0.62
12.0
0
0.63
12.2
0
0.64
12.3
4'1.0x 30'1.1SST 1.0
1.1
1.0
1.2
4'1.0x 15'1.1LCS 4'1.0x 15'1.1RCS 1.0 1.1 4'1.0 x 18'1.1 SST 1.2 4'1.0 x 9' LCS 1.0 1.1
0
0.70
11.5
0
0.74
12.0
0
0.79
12.3
0
0.80
12.4
0
0.76
11.6
1.1
4'1.0x 9' RCS 1.2 1.0
1.2
15-Q
0.82
12.0
1.1
1.3
0
0.84
12.3
1.1
1.2
0
0.85
12.4
1.1
0
0.90
11.4
0
0.99
0.40
15.1
1.0
1.2
50
0.42
15.3
1.0
1.2
0.53
30
0.58
40 50 20
14.2
1.0
15.0
1.0
1.1
0.60
15.1
1.0
1.2
0.61
15.3
1.0
1.2
0.72
14.3
1.0
1.2
40
0.81
15.3
1.0
1.2
20
0.92
14.7
1.0
1.2
O-15LCS 50 0.82 15.4 OT-15LCS 1.0 1.2 O-15RCS OT-15RCS 30 0.96 15.0 1.0 1.2
15-150
40 1.00 15.2 1.0 1.2 O-18SST OT-18SST 50 1.10 15.3 1.1 1.3 20 1.10 O-9LCS 30 1.16
14.5
O-9RCS 50 1.28
15.4
15-H
40 20
1.25
15.0 15.5
1.0 1.2 OT-9LCS 1.0 1.1
OT-9RCS 1.0 1.2 1.0
1.2
1.15
14.5
1.1
1.2
30
1.20
15.0
1.0
1.2
40
1.30
15.5
1.0
1.2
1.2
50
1.40
15.6
1.1
1.3
1.0
1.2
20
1.45
14.5
1.0
1.2
12.0
1.0
1.1
30
1.54
15.0
1.0
1.1
40
1.58
15.2
1.0
1.1
50
1.61
15.3
1.0
1.1
64
15-210
15-TT
Arc
4X30 SST
1.2
O-30SST 30 0.77 15.0 OT-30SST 1.0 1.1 15-T
1.3
0
40 20
1.2
12.1
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
SPECIAL SPECIAL PATTERN PATTERN 20 0.35 14.0 1.0 1.2 30 0.39 15.0 1.0 MALE1.2 15-60
model # psi gpm Radius (O-XX-XX)
0
1.04
12.3
1.0
1.1
0
1.05
12.4
1.0
1.1
0
1.05
11.4
1.0
1.2
20
1.72
14.5
1.0
1.2
0
1.15
12.0
1.0
1.2
30
1.78
15.0
1.0
1.1
4X15 LCS
4X15 RCS
4X18 SST
4X9 LCS
4X9 RCS
psi
gpm
Precip. Precip. Radius Rate Rate n (in./hr.) (in./hr.)
20
0.62
4x28
1.0
1.1
30
0.66
4x30
1.1
1.2
40
0.67
4x30
1.1
1.2
50
0.68
4x30
1.1
1.3
20
0.32
4x15
1.0
1.2
30
0.33
4x15
1.1
1.2
40
0.34
4x15
1.1
1.2
50
0.34
4x15
1.1
1.3
20
0.32
4x15
1.0
1.2
30
0.33
4x15
1.1
1.2
40
0.34
4x15
1.1
1.3
50
0.34
4x15
1.1
1.3
20
0.36
4x18
1.0
1.1
30
0.37
4x18
1.0
1.1
40
0.38
4x18
1.0
1.2
50
0.38
4x18
1.0
1.2
20
0.18
4x9
1.0
1.2
30
0.19
4x9
1.0
1.2
40
0.2
4x9
1.1
1.2
50
0.2
4x9
1.1
1.1
20
0.18
4x9
1.0
1.2
30
0.19
4x9
1.0
1.2
40
0.2
4x9
1.1
1.2
50
0.2
4x9
1.1
1.2
180º
0.28
12.1
30
0.37
12.1
O-15H 40 0.39
11.4
50
12.0
12-Q
1.0
1.2
OT-15T 1.0 1.2 1.1
C-Sprays-2018-2019.indd 23
model # psi gpm Radius (O-XX-XX) 20 15-60
1.3
0.39
1.0
1.1
OT-15H 1.0 1.2 1.0
15-Q
1.1
O-15210 20 0.46 11.5 OT-15210 1.0 1.2 30
0.49
O-15TT 40 0.51
12.2
50
0.52
O-15TQ 20 0.60
12.3
30
0.62
O-15F 40 0.63
12.0 12.2
50
0.64
12-T
12-150
™
Precip. Precip. si gpm Radius Rate Rate n (in./hr.) (in./hr.)
0.25
n (in./hr.) (in./hr.)
O-15150 20 0.34 12.0 OT-15150 1.0 1.2
DATA – PRECISION SERIES SPRAY NOZZLES
0
12-150
150º
240°
1.1
40
12-T
120º
120°
Five Radii Available in Toro (Male) & Female Threads
6/20/18 10:43 AM
e in Toro hreads
0
OT-1260
90°
SPRAYS
30 40
1.0
60°
12-H
12-210 210º
12-TT 240º
12-TQ 270º
360º
C-Sprays-2018-2019.indd 23
11.6
1.0
1.1
1.0
1.1
OT-15TT 1.0 1.1
15-T
OT-15TQ 1.0 1.2 1.0
1.1
12.3
1.0
1.1
OT-15F 1.0 1.1
15-150
0.35
14.0
1.0
1.2
30
0.39
15.0
1.0
1.2
40
0.40
15.1
1.0
1.2
50
0.42
15.3
1.0
1.2
20
0.53
14.2
1.0
1.2
30
0.58
15.0
1.0
1.1
40
0.60
15.1
1.0
1.2
50
0.61
15.3
1.0
1.2
20
0.72
14.3
1.0
1.2
30
0.77
15.0
1.0
1.1
40
0.81
15.3
1.0
1.2
50
0.82
15.4
1.0
1.2
20
0.92
14.7
1.0
1.2
30
0.96
15.0
1.0
1.2
40
1.00
15.2
1.0
1.2
50
1.10
15.3
1.1
1.3
Arc
psi
4X30 SST
4X15 LCS
4X15 RCS
4X18 SST
gpm
Radius
20
0.62
4x28
30
0.66
4x30
40
0.67
4x30
50
0.68
4x30
20
0.32
4x15
30
0.33
4x15
40
0.34
50
0.34
4x15
20
0.32
4x15
30
0.33
4x15
40
0.34
4x15
50
0.34
4x15
20
0.36
4x18
4x15
30
0.37
4x18
40
0.38
4x18
50
0.38
4x18
20
0.18
4x9
30
0.19
4x9 4x9
20
1.10
14.5
1.0
1.2
30
1.16
15.0
1.0
1.1
40
1.25
15.4
1.0
1.2
1.2
50
1.28
15.5
1.0
1.2
40
0.2
1.1
1.3
20
1.15
14.5
1.1
1.2
50
0.2
4x9
1.1
1.3
30
1.20
15.0
1.0
1.2
20
0.18
4x9
20
0.70
11.5
1.0
1.2
30
0.74
12.0
1.0
1.1
40
0.79
12.3
1.0
1.2
50
0.80
12.4
1.0
20
0.76
11.6
30
0.82
12.0
15-H
15-210
40
0.84
12.3
1.1
1.2
40
1.30
50
0.85
12.4
1.1
1.2
50
1.40
15.6
1.1
1.3
20
0.90
11.4
1.0
1.2
20
1.45
14.5
1.0
1.2
30
0.99
12.0
1.0
1.1
30
1.54
15.0
1.0
1.1
40
1.04
12.3
1.0
1.1
40
1.58
15.2
1.0
1.1
50
1.05
12.4
1.0
1.1
50
1.61
15.3
1.0
1.1 1.2
20
1.05
11.4
1.0
1.2
30
1.15
12.0
1.0
1.2
40
1.19
12.2
1.0
1.2
1.22
15-TT
15-TQ
15.5
1.0
1.2
20
1.72
14.5
1.0
30
1.78
15.0
1.0
1.1
40
1.82
15.0
1.0
1.2
12.3
1.0
1.2
50
1.90
15.3
1.0
1.2
20
1.35
11.5
1.0
1.1
20
2.20
14.5
1.0
1.2
30
1.48
12.0
1.0
1.1
30
2.31
15.0
1.0
1.1
40
1.59
12.4
1.0
1.1
40
2.35
15.2
1.0
1.1
50
1.60
12.5
1.0
1.1
50
2.40
15.3
1.0
1.1
50
12-F
12.0
Precip. Precip. Rate Rate n (in./hr.) (in./hr.)
15-F
4X9 LCS
4X9 RCS
30
0.19
4x9
40
0.2
4x9
50
0.2
4x9
MP ROTATOR STREAM ROTOR The revolutionary MP Rotator features a unique, multitrajectory rotating stream delivery system that achieves waterconserving results. Rather than simply “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil and achieves an even distribution throughout the area being irrigated. This increased efficiency results in 30% less water use when compared to traditional sprays and significantly reduces wasteful runoff. The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius.
8' - 15' - 21' GUIDE MP ROTATOR13' DESIGN MP ROTATOR DESIGN GUIDE
6' - 10'
MP ROTATOR DESIGN GUIDE
MP800 Series
210° - 270° 360°
MP800SR
MP3000, M
MP1000, MP2000, MP3000, MP3500 MP ROTATOR PERFORMANCE DATA
MP ROTATOR PERFORMANCE DATA
MP ROTATOR PERFORMANCE DATA
90° - 210°
MP ROTATOR DESIGN GUIDE MP1000, MP2000,MP1000, MP3000,MP2000, MP3500
MP ROTATOR PERFORMANCE DATA
MP800
MP ROTATOR PERFORMANCE DATA 90° - 210° MP1000 MP1000
90° - 210°
-
210° - 270°
MP1000-210
210° - 270°
MP2000-210
MP800-360
360°
MP1000-360
360°
MP2000-360
Radius: 6' to 12' Adjustable Arc and Full–Circle Orange and Gray: 90° to 210° Lime Green and Gray: 360°
MAX RADIUS
MIN RADIUS
MP815
MP2000 MP1000 MP2000
Radius:13'8'to to21' 15' Radius: 8' to 15' Radius: MP2000 MP3000 Radius: 8' to 16' AdjustableArc Arc andFull-Circle Full-Circle Adjustable Arc and Full-Circle Adjustable and Radius: 8' to 15' Adjustable Radius: 13' to 21' Radius: 22' to 30' Arc and Full–Circle Maroon: to 210°Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Maroon: 90° 90° to 210° Black: 90° 90° to 210° Maroon and Gray: to 210° Maroon: 90° to 210° Lt. Blue: 210° to 270°Black: 90° to 210° Blue: 90° Lt. Blue: 210° to 270°to 210° Green: 210° to 270° Lt. Blue and Gray: 210° to 270° Lt. Blue: 210° to 270° Olive: 360° Green: 210° to 270° Olive: 360° Yellow: 210° to 270° Red: 360° Olive and Gray: 360°
MP1000
Olive: 360°
Red: 360°
Gray: 360°
MP20 MP300
Radius2 Radius: Adjusta Adjustab Blac Blue: Gree Yellow Red Gray:
Flow Precipin/hr in/hr Precip Radius Flow Flow Precip in/hr Radius Flow Precip Radius Flow Radius RadiusArc FlowPressure Flow in/hr Flow Radius Flow Precip Flow in/hr Precip in/hr GPH GPMft. GPH GPH GPH ft.ft. GPM ft.ft. ft. GPM PSI GPH GPM GPH 25.2 0.83 30 8 0.17 0.90 1.04 9.6 6 0.13 25 -- 3025---14 -- -- 0.42---0.34 20.4 42.6 0.44 0.51 2517 25 -- 25 20.4 --0.71 0.45 ---- 17 ---0.95 0.45 17--0.52 0.34 0.52 90° 90° 15 12 0.450.46 27.6 0.79 35 9 0.21 0.89 1.03 0.17 10.2 0.52 0.38 22.8 0.76 0.45 45.6 0.52 0.40 11.4 7 90°0.15 30 90° 12 3530 300.91 0.45 18120.52 0.38 0.1727 22.8 10.2 0.45 0.52 0.46 2718 0.17 10.21890° 0.45 0.52 13 40 0.19 11.4 0.50 29.419 0.40 24.0 0.82 49.2 0.40 15 13 0.430.49 0.84 40 10 0.23 0.83 0.96 13.8 8 0.16 35 350.97 0.43 19130.49 0.40 0.1928 24.0 11.4 0.43 0.50 0.46 2819 35 0.19 11.4 0.43 0.50 0.43 0.49 14 45 0.21 12.6 0.48 20 0.43 25.8 0.41 0.48 30 0.86 51.6 0.37 0.42 16 14 0.410.52 31.2 0.78 45 11 0.25 0.80 0.92 15.0 8 0.18 40 400.90 0.21 25.8 12.6 0.41 0.41 0.48 0.48 40 0.21 12.6 0.41 0.48 2014 0.43 3020 45 14 0.23 13.8 0.45 0.52 21 0.46 27.6 0.40 0.46 30 0.90 54.0 0.39 0.44 5045 16 14 0.55 33.0 0.83 0.96 50 11 0.27 0.79 0.92 16.2 9 0.19 45 14 0.23 13.8 0.45 0.52 0.23 13.8 0.45 0.52 21 0.46 27.6 0.40 0.46 50 15 0.25 15.0 0.43 0.49 21 0.47 28.2 0.41 0.47 30 0.95 57.0 0.41 0.47 3021 5550 16 0.58 34.8 0.87 55 12 0.28 0.80 0.93 16.8 10 0.20 55 501.01 0.42 21150.48 0.47 0.2530 28.2 15.0 0.43 0.49 0.50 3021 15.021 0.43 0.49 15 0.27 16.2 15 0.46 0.25 0.53 0.48 28.8 1.01 0.41 60.6 0.47 0.43 45.0 0.85 30 8 0.33 0.88 1.02 19.2 6 0.26 25 -- 3055---13 15 -- 0.75 -0.6 36.0 1.44 0.42 86.4 0.48 0.44 550.99 0.45 21150.52 0.48 0.2725 28.8 16.2 0.46 0.53 0.51 3021 0.27 16.216 0.46 0.53 180° 14 51.6 17 0.84 35 9 0.38 0.85 0.99 22.2 7 180° 0.29 30 180° 12 3525 0.34 20.4 0.52 0.64 38.4 94.8 0.42 25 --1.58 0.45 --- 0.48 2516 -- 0.450.86-----0.98 0.43 16--0.49 0.6-- 27 36.0 0.52 0.38 22.8 0.430.930.50 55.818180° 0.71 42.6 0.42 0.49 28 1.70 102.0 0.42 15 0.80 0.92 40 10 0.42 0.81 0.93 25.2 8 0.32 35 180°13 4030 30 0.34 38.4 20.4 0.43 0.45 0.49 0.52 0.48 2717 12 0.34 20.4 0.45 0.52 1712 0.64 14 45 0.42 25.2 0.410.960.48 57.6 19 0.77 46.2 0.41 0.47 30 1.82 109.2 0.39 0.45 15 0.82 45 11 0.46 0.77 0.88 27.6 8 0.36 40 350.95 0.38 42.6 22.8 0.42 0.43 0.49 0.50 35 13 0.38 22.8 0.43 0.50 1813 0.71 2818 14 50 0.44 26.4 0.431.060.50 63.620 0.85 51.0 0.47 30 1.93 115.8 0.41 0.48 16 0.80 0.92 0.41 50 11 0.48 0.76 0.88 28.8 9 0.38 45 40 14 0.42 25.2 0.41 0.48 40 25.221 0.41 0.48 50 15 0.50 30.0 14 0.43 0.42 0.49 0.91 54.6 0.40 19 0.46 0.77 30 46.22.04 0.41 122.4 0.47 0.44 0.50 3019 55 16 1.11 66.6 0.83 0.96 55 12 0.50 0.73 0.84 30.0 10 0.40 45 0.4430 51.0 26.4 0.43 0.50 0.53 3020 45 26.421 0.43 0.50 55 15 0.51 30.6 14 0.44 0.44 0.50 0.95 57.0 0.41 20140.48 0.85 2.13 0.41 127.8 0.47 0.46 30 13 0.88 52.8 0.86 0.99 30 8 0.35 0.80 0.93 22.2 6 0.30 25 --- 15 --16 0.72 43.2 0.46 21150.54 0.91 1.68 0.40 100.8 0.46 0.44 50 0.5025 54.6 30.0 0.43 0.49 0.51 3021 50-0.50 30.0 0.43 0.49 210° 14 0.96 57.6 0.81 0.93 35 9 0.38 0.77 0.89 26.4 7 210° 0.34 30 210° 12 35 0.40 24.0 15 0.46 0.51 0.53 0.75 45.0 0.43 21150.49 0.95 1.84 0.41 110.4 0.48 0.42 55 0.5127 57.0 30.6 0.44 0.50 0.48 3021 55 30.617 0.44 0.50 15 0.81 0.93 0.41 40 10 0.43 0.81 0.91 29.4 8 0.37 35 13 40 0.45 27.0 0.44 1.10 0.51 66.018 0.81 48.6 0.48 28 1.99 119.4 0.42 0.48 25 ----25 -----16-0.72 43.2 0.46 0.54 2516 40 14 0.49 29.4 0.41 0.48 19 0.86 51.6 0.39 0.45 30 2.12 127.2 0.39 0.45 15 1.16 69.6 0.85 0.98 45 10 0.45 0.82 0.95 31.8 8 0.42 210°14 4530 30 0.40 45.0 24.0 0.43 0.46 0.49 0.53 12 0.40 24.0 210° 0.46 0.53 1712 0.75 2717 45 0.51 30.6 0.43 0.50 20 0.91 54.6 0.38 0.43 30 2.25 135.0 0.41 0.48 50 16 1.24 74.4 0.80 0.92 50 11 0.49 0.73 0.85 33.6 9 0.44 35 0.4530 48.6 27.0 0.44 0.51 0.50 2818 35 27.021 0.44 0.51 50 15 0.57 34.2 13 0.42 0.45 0.48 0.98 58.8 0.37 18130.42 0.81 2.37 0.41 142.2 0.48 0.43 55 16 1.30 78.0 0.84 0.97 55 12 0.56 0.70 0.81 34.8 10 0.47 40 0.4930 51.6 29.4 0.41 0.48 0.53 3019 40 29.421 0.41 0.48 55 15 0.59 35.4 14 0.43 0.49 0.50 1.01 60.6 0.38 19140.44 0.86 2.49 0.39 149.4 0.45 0.46 30 13 1.14 68.4 0.87 1.00 30 8 0.66 0.89 1.03 37.8 6 0.47 25 --- 14 --0.87 52.2 0.44 20140.50 0.91 2.19 0.38 131.4 0.43 0.45 45 0.5125 54.6 30.6 0.43 0.50 0.52 3020 45-0.51 30.616 0.43 0.50 360° 35 14 1.240.49 74.4 17 0.81 0.94 0.42 9 0.71 0.80 0.92 42.0 7 270° 0.52 30 270° 12 35 0.48 28.8 0.95 57.0 2.37 0.37 142.2 0.42 0.42 50 0.5727 58.8 34.2 0.42 0.48 0.48 3021 50 15 0.43 0.57 34.2 0.42 0.48 21150.49 0.98 15 0.80 0.92 0.41 40 10 0.78 0.79 0.91 46.8 8 0.56 35 13 40 0.53 31.8 0.401.400.46 84.018 1.03 61.8 0.47 28 2.55 153.0 0.42 0.48 55 15 0.59 35.4 0.43 0.50 2115 1.01 3021 55 0.59 60.6 35.4 0.38 0.43 0.44 0.50 14 45 0.63 37.8 0.41 1.470.48 88.219 1.10 66.0 0.45 30 2.73 163.8 0.39 0.45 15 0.84 0.97 0.39 45 10 0.85 0.78 0.90 51.0 8 0.59 40 25 -----16-0.87 52.2 0.44 0.50 2516 25 ----14 50 0.67 40.2 0.441.54 0.51 1.17 70.2 0.43 30 2.89 173.4 0.41 0.48 16 92.420 0.77 0.89 0.38 50 11 0.88 0.73 0.85 52.8 9 0.63 45 270°15 30 12 0.41 0.48 28.8 270° 0.43 0.49 17120.41 0.95 30 0.4830 57.0 28.8 0.43 0.49 0.50 2717 43.2 1.23 73.8 3.06 0.42 183.6 0.49 0.44 55 0.72 16 1.61 0.47 96.621 0.81 0.93 0.36 55 12 0.98 0.70 0.81 58.8 10 0.70 50 35 31.821 0.40 0.46 35 0.5330 61.8 31.8 0.40 0.46 0.53 2818 55 15 0.75 45.0 13 0.43 0.53 0.49 1.30 78.0 0.38 18130.44 1.03 3.22 0.41 193.2 0.47 0.46 30 13 1.52 91.2 0.87 1.00 25 360° --- 14 --1.20 72.0 0.45 19140.52 1.10 2.88 0.39 172.8 0.45 0.44 40-0.63 37.816 0.41 0.48 40 0.6325 66.0 37.8 0.41 0.48 0.51 3019 35 14 1.70 102.0 0.83 0.96 360° 30 12 0.69 41.4 14 0.46 0.67 0.53 1.28 76.8 0.43 20140.49 1.17 3.15 0.38 189.0 0.43 0.42 45 40.217 0.44 0.51 45 0.6727 70.2 40.2 0.44 0.51 0.48 3020 Due to its precipitation rate of approximately 0.8 in/hr, we strongly 15 0.80 0.92 0.41 35 13 40 0.77 46.2 0.441.87 0.51 112.218 1.37 82.2 0.47 28 3.40 204.0 0.42 0.48 50 15 0.72 43.2 0.41 0.47 21 1.23 73.8 0.36 0.41 3021 50 15 0.72 43.2 0.41 0.47 recommend zoning the MP800 Series separately from the Standard 15 0.86 0.99 0.39 40 14 45 0.84 50.4 0.412.000.48 120.019 1.48 88.8 0.46 30 3.64 218.4 0.39 0.45 55 15 0.75 45.0 0.43 0.49 21 1.30 78.0 0.38 0.44 3021 55 15 0.75 45.0 0.43 0.49 MP Rotator Series. 45 14 50 0.88 52.8 0.432.130.50 127.820 1.57 94.2 0.44 30 3.86 231.6 0.41 0.48 16 0.80 0.92 0.38 -- 0.42 ----16--0.42 1.20 0.52 25 -- 30 72.0 --4.07 0.45 --50 15 5525 0.98 58.8 1.68 100.8 244.2 0.44 0.50 2516 16 2.260.48 135.621 0.85 0.98 0.37 360°15 301.01 60.6 12 0.43 0.69 41.421360° 0.46 0.53 30 0.6930 76.8 41.4 0.46 0.53 0.53 2717 55 0.50 1.74 104.4 0.38 17120.44 1.28 4.27 0.43 256.2 0.49 0.46 35 13 0.77 46.2 0.44 0.51 1813 1.37 2818 35 0.77 82.2 46.2 0.41 0.44 0.47 0.51 40 14 0.84 50.4 0.41 0.48 1914 1.48 3019 40 0.84 88.8 50.4 0.39 0.41 0.46 0.48 MP3500 MP3500 MP3500 PERFORMANCE DATA NOTE FOR ALL CHARTS: 90° 180° 210° 14 0.88 52.8 0.43 2014 1.57 3020 45 0.88 52.8 0.43 0.44 0.50 Radius: 31' 45 to 35' Radius: 31' to 35' 0.50 Radius:94.2 31' to 35' 0.38 Bold = Recommended Pressure. 15 0.98 58.8 0.42 0.48 2115 1.68 100.8 3021 Adjustable50 Arc Adjustable Arc Adjustable Arc 0.37 50 0.98 58.8 0.42 0.42 0.48 The MP Rotator is designed to maintain matched precipitation after radius adjustment. Optimal for the MP is 40Brown: PSI. This can be Light Brown: 90° Light 180° Brown: 210° 55 pressure 15 1.01 Rotator 60.6 0.43 0.50 2115 1.74 104.4 0.38 3021 55 1.01Light 60.6 0.43 0.44 0.50 Arc
Pressure PSI
Radius Flow GPM ft.
Flow GPH
Precip in/hr
Flow Pressure Radius Radius ArcFlowPressureArc ArcRadius Pressure Radius Flow Flow PrecipFlow in/hr ft. ft. ft. GPM PSI GPM GPM ft. PSIPSI GPM GPH
achieved easily by using the MP Rotator with the Pro-Spray PRS40 Spray Body, pressure regulated Flow at 40 PSI. Pressure Radius Flow Precip in/hr PSI
ft.
GPM
GPH
25 30 35
33 34 34
1.04 1.13 1.21
62.4 0.37 0.42 MP3500 67.8 0.3831' to0.43 Radius: 35' 72.6 0.40 Arc 0.47 Adjustable
Radius ft.
Flow GPM
33 34 34
2.21 2.24 2.65
Flow GPH
132.6 90°
134.4 159.0
Precip in/hr
Radius ft.
0.39 0.45 33 MP3500 MP3500 0.37 0.43 34 Radius: 31'31'toto35' Radius: 35' 0.44 0.51 Arc Adjustable Adjustable Arc34
Flow GPM
Flow GPH
2.59 2.84 3.08
155.4 170.4 184.8
Precip in/hr
65
0.39 180° 90°
0.41 0.44
0.45 MP3500 MP350 0.47 Radius: 3 Radius: 0.51 Adjustab Adjusta
- 30' GUIDE MP ROTATOR22' DESIGN
SPECIAL PATTERN
3500 MP1000, MP2000, MP3000, MP3500 MP ROTATOR DESIGN GUIDE
MP1000, MP2000, MP3000, MP3500 MP ROTATOR PERFORMANCE DATA MP1000MP3000 90° - 210° MP3000
Flow GPH
.34 .38 .40 .43 .46 .47 .48 0.6 .64 0.71 0.77 .85 0.91 .95 .72 .75 0.81 .86 0.91 .98 .01 .87 .95 .03 .10 .17 .23 .30 .20 .28 .37 .48 .57 .68 .74
20.4 22.8 24.0 25.8 27.6 28.2 28.8 36.0 38.4 42.6 46.2 51.0 54.6 57.0 43.2 45.0 48.6 51.6 54.6 58.8 60.6 52.2 57.0 61.8 66.0 70.2 73.8 78.0 72.0 76.8 82.2 88.8 94.2 100.8 104.4
MP3000
MP Specialty 45° - 105° CORNER
MP1000-C
Radius: 8' 30' to 15' Radius: 13' to 21' Radius: 22' to 30' Radius: 22' to Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle MPand ROTATOR PERFORMANCE DATA Adjustable Arc Full-Circle Maroon: 90° to 210° Black: 90° to 210° Blue: 90° to 210° Blue: 90° to 210° MP ROTATOR PERFORMANCE DATA Lt. Blue: 210° to 270° Green: 210° to 270° Yellow: 210° to 270° Yellow: 210° to 270° MP1000 MP2000 MP3000 Olive: Gray: 360°360° Radius: 8' to 15' Red: 360° Radius: 13' to 21' Gray: 360° Radius:MP 22'Corner to 30' Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc8'and Radius: to 15'Full-Circle Arc in/hr Pressure Radius RadiusFlowFlowFlowFlowPrecip Precip in/hr 90°Radius Flow Precip in/hr Flow Precip in/hr Precip in/hr Arc Maroon: to 210° Flow Black: 90° Radius to 210° Flow Blue:Adjustable 90° to 210° PSI GPMGPHGPH ft.270° GPM GPH GPH ft. ft. GPM 45° to 105° Lt. Blue: 210° to Green: 210° toft.270° GPM Yellow:Turquoise: 210° to 270° Olive: Gray: 360° 25 -- 360° 17 0.34 20.4 0.45 Red: 0.52360° 25 0.71 42.6 0.44 0.51 0.45 0.52 25 -- 0.71 -- 42.6 -- 0.44 -- 0.51
o 21' Arc and Full-Circle 0° to 210° 0° to 270° °
low PM
MP2000
MP ROTATOR DESIGN GUIDE
210° - 270°
MP3000-210
5' - 14' LEFT
MP1000-LS
360°
MP3000-360
5' - 14' RIGHT
MP1000-RS
5' - 28' CENTRE
MP1000-SS
90° 0.45
0.43 0.41 0.40 0.41 0.42 0.45 180° 0.43 0.42 0.41 0.41 0.40 0.41 0.46 210° 0.43 0.41 0.39 0.38 0.37 0.38 0.44 270° 0.42 0.41 0.39 0.38 0.36 0.38 0.45 360° 0.43 0.41 0.39 0.38 0.37 0.38
30 0.52 35 0.49 40 0.48 45 0.46 50 0.47 55 0.48 25 0.52 30 0.49 35 0.49 40 0.47 45 0.47 50 0.46 55 0.48 25 0.54 30 0.49 35 0.48 40 0.45 45 0.43 50 0.42 0.44 55 0.50 25 0.49 30 0.47 35 0.45 40 0.43 45 0.41 50 0.44 55 0.52 25 0.49 30 0.47 35 0.46 40 0.44 45 0.42 50 0.44 55
180°
o 35' Arc wn: 180°
27 28 30 30 30 30 25 27 28 30 30 30 30 25 27 28 30 30 30 30 25 27 28 30 30 30 30 25 27 28 30 30 30 30
12 13 14 14 15 15 -12 13 14 14 15 15 -12 13 14 14 15 15 -12 13 14 14 15 15 -12 13 14 14 15 15
0.760.17 45.610.2 0.400.450.46 0.52 Arc Pressure Radius 0.820.19 49.211.4 0.400.430.46 0.50 PSI ft. 0.860.21 51.612.6 0.370.410.42 0.48 25 0.390.450.44 -- 0.52 0.900.23 54.013.8 90° 30 0.410.430.47 12 0.49 0.25 57.015.0 0.95 35 0.430.460.50 13 0.53 1.010.27 60.616.2 14 --- 0.44 -- 0.51 1.44 -- 86.4 40 45 0.420.450.48 14 0.52 1.580.34 94.820.4 50 0.420.430.48 15 0.50 1.700.38102.022.8 55 0.390.410.45 15 0.48 1.820.42109.225.2 25 0.410.430.48 -- 0.50 1.930.44115.826.4 180° 30 0.440.430.50 12 0.49 0.50122.430.0 2.04 35 0.460.440.53 13 0.50 2.130.51 127.830.6 14 --- 0.44 -- 0.51 1.68 -- 100.8 40 45 0.420.460.48 14 0.53 1.840.40110.424.0 50 0.420.440.48 15 0.51 1.990.45 119.427.0 55 0.390.410.45 15 0.48 2.120.49127.229.4 2.250.51 135.030.6 25 0.410.430.48 -- 0.50 210° 0.57142.234.2 2.37 30 0.430.420.50 12 0.48 2.490.59149.435.4 35 0.460.430.53 13 0.50 2.19 -- 131.4 40 -- 0.45 -- 0.52 14 -2.370.48142.228.8 45 0.420.430.48 14 0.49 2.550.53153.031.8 50 0.420.400.48 15 0.46 2.730.63163.837.8 55 0.390.410.45 15 0.48 2.890.67173.440.2 25 0.410.440.48 -- 0.51 3.06 0.72183.643.2 270° 30 0.440.410.50 12 0.47 3.220.75193.245.0 35 0.460.430.53 13 0.49 2.88 -- 172.8 40 -- 0.44 -- 0.51 14 -3.150.69189.041.4 45 0.420.460.48 14 0.53 3.400.77204.0 46.2 50 0.420.440.48 15 0.51 3.640.84218.450.4 55 0.390.410.45 15 0.48 3.860.88231.652.8 25 0.410.430.48 -- 0.50 4.07 0.98244.258.8 360° 30 0.440.420.50 12 0.48 4.271.01 256.260.60.460.430.53 0.50 35 13
MP3500 MP3500
Radius: 31' to Radius: 31'35' to 35' Adjustable Arc Arc Adjustable Light Brown: 210°90° Light Brown:
40 45 50 55
14 14
210° 90° 15 15
18
0.38
22.8
0.45
0.52
27
20 21 -21 10.2 21 11.4 16 12.6 17 13.8 18 15.0 19 16.2
0.43 0.46-0.45 0.47 0.43 0.48 0.60.41 0.45 0.64 0.43 0.71 0.46 0.77
25.8 27.6 -0.52 28.2 0.50 28.8 0.48 36.0 0.52 38.4 0.49 42.6 0.53 46.2
0.41 0.40 0.41 0.42 0.45 0.43 0.42 0.41 0.41 0.40 0.41 0.46 0.43 0.41 0.39 0.38 0.37 0.38 0.44 0.42 0.41 0.39 0.38 0.36 0.38 0.45 0.43 0.41 0.39 0.38 0.37 0.38
0.48 170.46 180.47 190.48 200.52 210.49 210.49 210.47 160.47 170.46 180.48 190.54 200.49 210.48 210.45 160.43 170.42 180.44 190.50 200.49 210.47 210.45 160.43 170.41 180.44 190.52 200.49 210.47 210.46 160.44 170.42 180.44
30 0.34 30 0.38 30 0.40 30 0.43 25 0.46 27 0.47 28 0.48 30 0.6 30 0.64 30 0.71 30 0.77 25 0.85 27 0.91 28 0.95 30 0.72 30 0.75 30 0.81 30 0.86 25 0.91 27 0.98 28 1.01 30 0.87 30 0.95 30 1.03 30 1.10 25 1.17 27 1.23 28 1.30 30 1.20 30 1.28 30 1.37 30
-0.17 0.19 0.21 0.23 0.25 0.27 -- 20 -- 0.85-- 51.0 -0.34 21 20.4 0.91 0.45 54.6 0.52 0.38 21 22.8 0.95 0.43 57.0 0.50 0.42 16 25.2 0.72 0.41 43.2 0.48 0.44 17 26.4 0.75 0.43 45.0 0.50 0.50 18 30.0 0.81 0.43 48.6 0.49 0.51 19 30.6 0.86 0.44 51.60.50 -- 20 -- 0.91 -- 54.6 -0.40 21 24.0 0.98 0.46 58.8 0.53 0.45 21 27.0 1.010.44 60.60.51 0.49 16 29.4 0.87 0.41 52.2 0.48 0.51 17 30.6 0.95 0.43 57.0 0.50 0.57 18 34.2 1.03 0.42 61.80.48 0.59 19 35.4 1.100.43 66.0 0.50 -- 20 -- 1.17 -- 70.2 -0.48 21 28.8 1.23 0.43 73.8 0.49 0.53 21 31.8 1.30 0.40 78.0 0.46 0.63 16 37.8 1.20 0.41 72.0 0.48 0.67 17 40.2 1.28 0.44 76.80.51 0.72 18 43.2 1.370.41 82.2 0.47 0.75 19 45.0 1.48 0.43 88.8 0.49 -- 20 -- 1.57 -- 94.2 -0.69 21 41.4 1.68 0.46 100.8 0.53 0.77 21 46.2 1.74 0.44 104.4 0.51 0.84 50.4 0.41 0.48 0.88 52.8 0.43 0.50 MP3500 0.98 58.8 0.42 0.48 Radius: 31' to 35' 1.01Adjustable 60.6 Arc0.43 0.50
MP Rotator Key
Flow GPH
Precip in/hr in/hrin/hr Pressure Radius RadiusFlowFlowFlowFlowPrecip Precip Radius MP3500 31' - 35' ft. ft. GPM PSI GPMGPHGPH Radius: 31' to 35' ft.
Flow GPM
.21 .24 .65 86 .10 .21 .28
132.6 134.4 159.0 171.6 186.0 192.6 196.8
0.39 0.37 0.44 0.45 0.49 0.50 0.52
2.21 132.6 2.24 134.4 2.65 159.0 Precip in/hr 2.86 171.6 3.10 186.0 0.37 0.42 3.21 192.6 0.38 0.43 3.28 196.8 0.40 0.47 0.40 0.46 0.43 0.50 0.45 0.52 0.47 0.54
33 34 34 35 35 35 35
33 34 34 35 35 35 35
2.591.04 155.462.4 0.390.37Adjustable 0.450.42 Arc 33 Light 2.841.13 170.467.8 0.410.380.47 0.43Brown: 90° 34 3.081.21 184.872.6 0.440.400.51 0.47 Pressure Radius Flow 34Flow 3.291.28 197.476.80.440.400.51 0.46 PSI ft. GPM 35GPH 3.541.38 212.482.8 0.480.430.55 0.50 35 25 33 1.04 62.4 3.761.43225.685.8 0.510.450.59 0.52 35 30 34 1.13 67.8 3.941.50236.4 90.0 0.530.470.61 0.54 35 35 34 1.21 72.6 40 35 1.28 76.8 45 35 1.38 82.8 131.43 50 35 85.8 55 35 1.50 90.0
90° - 210° MP3500
45.6
0.40
0.46
0.86 51.6 0.37 20.4 0.900.4554.00.520.39 25 45° 22.8 0.950.45 57.00.52 0.41 30 35 24.0 1.010.4360.60.490.43 40 25.8 1.440.41 86.40.480.44 45 27.6 1.580.4094.80.460.42 50 28.2 1.700.41102.00.470.42 55 28.8 1.820.42109.20.480.39
0.42 25 0.44 27 0.47 28 0.50 30 0.51 30 0.48 30 0.48 30 0.45
Flow 90° GPH
Flow Flow GPM GPH
PrecipFlow in/hr GPH
0.71 -0.76 12 13 0.82 14 0.86 14 0.90 14 0.95 15 1.01 11 1.44 12 1.58 13 1.70 14 1.82 14 15 1.93
42.6 0.44 --0.51 -45.6 0.40 10.2 0.46 0.17 0.18 49.2 0.40 10.8 0.46 0.19 51.6 0.37 11.4 0.42 0.21 54.0 0.39 12.6 0.44 0.22 13.2 57.0 0.41 0.47 0.23 13.8 60.6 0.43 0.50 25 0.31 18.6 36.0 1.930.45 25 86.4 0.44 20.4 0.51 90°115.80.520.41 0.48 30 0.34 38.4 2.040.43122.40.490.44 27 94.8 0.42 21.6 0.48 0.50 35 0.36 42.6 2.130.42127.80.490.46 28 102.0 0.42 23.4 0.48 0.53 40 0.39 46.2 1.680.41100.80.470.44 30 109.2 0.39 24.6 0.45 45 0.41 0.51 50 0.43 51.0 1.840.41110.40.470.42 30 115.8 0.41 25.8 0.48 0.48 55 15 0.46 54.6 1.990.40119.40.460.42 30 2.04 122.4 0.44 27.6 0.50 0.48 25 112.13 0.36 0.45 57.0 2.120.41127.20.480.39 30 127.8 0.46 21.6 0.53 105° 30 12 0.39 0.48 43.2 2.250.46135.00.540.41 25 1.68 100.8 0.44 23.4 0.51 35 13 0.42 25.2 0.50 45.0 2.370.43142.20.490.43 27 1.84 110.4 0.42 0.48 40 14 0.45 27.0 0.53 48.6 2.490.41149.40.480.46 28 1.99 119.4 0.42 0.48 45 14 0.48 28.8 0.52 51.6 2.190.39131.40.450.45 30 2.12 127.2 0.39 0.45 50 15 0.51 30.6 0.48 54.6 2.370.38142.20.430.42 30 2.25 135.0 0.41 31.8 0.48 55 15 0.53 0.48 58.8 2.550.37153.00.420.42 30 2.37 142.2 0.43 0.50 0.45 60.6 2.730.38163.80.440.39 30 2.49 149.4 0.46 0.53 0.48 52.2 2.890.44173.40.500.41 25 2.19 131.4 0.45 0.52 PERFORMANCE DATA NOTE FOR ALL CHARTS: 0.50 57.0 3.060.42183.60.490.44 27 2.37 142.2 0.42 0.48 Bold = Recommended0.53 Pressure. 61.8 3.220.41193.20.470.46 28 2.55 153.0 0.42 0.48 The MP Rotator is designed matched precipitation after radius a 0.51 to maintain 66.0 2.880.39172.80.450.44 30 2.73 163.8 0.39 0.45 This can be achieved easily by using the MP Rotator with the Pro-Spray PRS 0.48 70.2 3.150.38189.00.430.42 30 2.89 173.4 0.41 0.48 0.48 73.8 3.400.36204.00.410.42 30 3.06 183.6 0.44 0.50 0.45 78.0 3.640.38218.40.440.39 30 3.22 193.2 0.46 0.53 0.48 72.0 3.860.45231.60.52 0.41 25 2.88 172.8 0.44 0.51 0.50 76.8 4.070.43244.20.490.44 27 3.15 189.0 0.42 0.48 0.53 82.2 4.270.41256.20.470.46 28 3.40 204.0 0.42 0.48 1.48 88.8 0.39 0.46 30 3.64 218.4 0.39 0.45 1.57 94.2 0.38 0.44 30 3.86 231.6 0.41 0.48 MP3500 210° 1.68 100.8 0.37 0.42 30 4.07 244.2 0.44 0.50 Radius: 31' to 35' 1.74 104.4Arc 0.38 0.44 30 4.27 256.2 0.46 0.53 Adjustable
MPKEY
19 20 180° 21 21
Light Brown: 180°
ow PM
0.45 25 0.43 30 0.51 35 0.52 40 0.56 45 0.58 50 0.60 55
0.76
Arc in/hrPressure Flow Flow Precip in/hr Radius Flow Flow Precip Radius Radius Flow 19 0.40 24.0 0.43 0.49 28 0.82 49.2 0.40 PSI 0.46 ft. GPM GPH ft. GPM GPH ft. GPM
Light Brown: 210°
Precip in/hr MP3500
Radius Radius: 31' to 35'ft.
Flow GPM
Flow PrecipMP3500 in/hr 180° GPH Radius: 31' to 35'
Arc 0.39 Adjustable 0.45 Arc 33 2.59 155.4 0.39 Adjustable 0.45 180° Light Brown: 210° 0.37 Light 0.43 Brown: 34 2.84 170.4 0.41 0.47 0.44Radius 0.51 Flow 34 Flow3.08Precip 184.8 0.51 in/hr0.44 Radius Flow Flow 0.45 ft.0.52 GPM 35 GPH 3.29 197.4 0.44 0.51 ft. GPM GPH 0.49 0.56 35 3.54 212.4 0.48 0.55 33 2.21 132.6 0.39 0.45 33 2.59 155.4 0.50 0.58 35 3.76 225.6 0.51 0.59 34 2.24 134.4 0.37 0.43 34 2.84 170.4 0.52 0.60 35 3.94 236.4 0.53 0.61 34 2.65 159.0 0.44 0.51 34 3.08 184.8 35 2.86 171.6 0.45 0.52 35 3.29 197.4 35 3.10 186.0 0.49 0.56 35 3.54 212.4 14 13 35 3.21 192.6 0.50 0.58 35 3.76 225.6 35 3.28 196.8 0.52 0.60 35 3.94 236.4
210°
Precip in/hr 0.39 0.41 0.44 0.44 0.48 0.51 0.53
0.45 0.47 0.51 0.51 0.55 0.59 0.61
13
66
CONTROLLER 1. 2. 3. 4. 5.
WIFI CONTROLLER HARDWIRED CONTROLLER BATTERY CONTROLLER GARDEN HOSE TIMER ACCESSORIES
Irrigation Controllers are the heart of any multi-zoned Irrigation System and are widely used for both Sprinkler and Drip/Micro Irrigation Systems. Irrigation Controllers are offered in both Outdoor and Indoor configurations and are available for systems from 4-32 zones.
HUNTER WIFI CONTROLLER Sit back and relax. With Hunter-Hydrawise, everything you need is in the palm of your hand. Remote access allows you to view, manage, and monitor your irrigation controller from your phone, tablet, or computer at your convenience. 6,12,24, up to 54 stations 6 starttimes per station - New style full-functioning controller with colour touchscreen - Wifi enabled for simple connection to the internet - Receives weather info via internet to help manage water use Warranty 2 years HCC-800-M for up to 54 stations
ALSO AVAILABLE EXPANSION 12 STATION
CONTROLLER
HC-1200I
12 STATION
EXPANSIONS (MAX 2)
HC-1200M
¾" FLOW SENSOR
HC-075-FLOW-B
1" FLOW SENSOR
HC-100-FLOW-B
1 1/2” FLOW
HC-150-FLOW-B
2” FLOW SENSOR
HC-200-FLOW-B
67
HYDRO-RAIN WIFI CONTROLLER The Hydro-Rain HRC-400 Smart Irrigation Controller, powered by B-hyve, combines the easiest-to-program controller on the market with the remote capabilities of Bluetooth and wifi. A perfect controller for new installations, or for replacement applications.
6 or 18 stations fixed 3 programs - 4 starttimes - Wifi enabled for simple connection to the internet - Rain sensor bypass technology allows manual or automatic rain delay Warranty 3 years
8 STATIONS
HRC400-WIFI-08
16 STATIONS
HRC400-WIFI-16
CUSTOM DOORS WITH YOUR COMPANY LOGO AVAILABLE
RAIN BIRD ESP MODULAR CONTROLLER With 4- to 22-station scalability, the ESP-Me helps you better serve your customers. Install the same controller on residential and light commercial sites – the more stations you add, the more you save, providing you and your customers with more value for the money.
4 stations expandable to 22 stations 4 programs - 6 starttimes each (1-360) minutes) - Automatic watering delay - Bypass rain sensor by station - Delay Watering Warranty 3 years - Expansion Modules - Rainbird LNK Wifi Module INDOOR TIMER 4 STATIONS
ESP4MEI
OUTDOOR TIMER ESP4ME STATION MODULES
68
3 STATIONS
ESPM-3
6 STATIONS
ESPM-6
IRRITROL TOTAL CONTROL CONTROLLER The Irritrol® Total Control®l-R family of controllers is prove that advanced doesn’t have to be complicated. Developed to meet a wide variety of watering requirements, the easy-to-program Total Control Series is available in models ranging from 6 to 48 stations. Programming flexibility is provided by four independent programs, 16 independent start times and a 365-day calendar for odd/even day scheduling. 6,9,12,15,18 or 24 stations 4 programs - 4 start times each (1-600 minutes) - Removable Panel module Upgrade - Programmable Rain-off up to 7 Days Warranty 5 years - CI-100-Wireless Weather Sensing - SMRT-1 Smart Logic - R-100-Kit Remote
INDOOR TIMER
OUTDOOR TIMER
6 STATION
TC-6IN-B
TC-6EX-B
9 STATION
TC-9IN-B
TC-9EX-B
12 STATION
TC-12IN-B
TC-12EX-B
15 STATION
TC-15EX-B
18 STATION
TC-18EX-B
24 STATION
TC-24EX-B
36 STATION
TC-36EX-B
48 STATION
TC-48EX-B
TORO EVOLUTION™ SERIES CONTROLLER The Toro EVOLUTION® Series Controller is a one-of-a-kind irrigation controller designed to help you meet your residential and light commercial customers’ needs. Modular between 4 and 16 stations, the EVOLUTION controller features a unique and intuitive menu system that delivers straightforward programming and easy-to-understand prompts. 4 stations expandable to 16 stations 3 programs - 4 starttimes each - Cycle and soak feature - Monthly adjust feature - Grow-in feature scheduling Warranty 5 years - EMOD-4/-12 - 4 or 12 station Expansion - EVO-SC - Smart Connect - PSS-SEN Soil Sensor Probe - EVO-WS Weather Sensor - EVO-HH Remote - SMRT-I smart connect
4 ST. INDOOR MODULAR
EVO-4ID
4 ST. OUTDOOR MODULAR
EVO-4OD
69
IRRITROL KD2 CONTROLLER KD2 SERIES offers a unique combination of sophisticated features and familiar operation, making it the ideal residential controller from Irritrol®. Its automatic, semi-automatic and manual operations, a wide range of watering intervals, and the ability to make percentage changes to watering duration for seasonal
4, 6, 9 or 12 stations fixed (indoor or outdoor) 3 watering programs, 3 starttimes (1-360 minutes) - Non volatile Program Memory - Automatic Valve Testing Mode - Rain Delay Mode Warranty 5 years - Climate Logic Weather Sensing
INDOOR TIMER
OUTDOOR TIMER
4 STATION
KD400-INT
KD400-EXT
6 STATION
KD600-INT
KD600-EXT
9 STATION
KD900-INT
KD900-EXT
HYDRO-RAIN CONTROLLER This straightforward, user-friendly sprinkler controller combines simplicity of operation with feature-rich flexibility. For starters, the HRC 100 C is enclosed in an indoor/outdoor UL approved case capable of 4,6,9 or 12 watering stations. Each model offers three independent programs– A, B and C –with up to four start times per program.
4, 6, 9 or 12 stations fixed 3 programs - 4 starttimes each (1-240 minutes) - Program Data Safely Stored - Manual Advance - Indoor/Outdoor UL® Cabinet Warranty 3 years
CUSTOM DOORS WITH YOUR COMPANY LOGO AVAILABLE
70
4 STATIONS
HRC100-04
6 STATIONS
HRC100-06
9 STATIONS
HRC100-09
12 STATIONS
HRC100-12
RAIN BIRD ESP-TM2 CONTROLLER The ESP-TM2 irrigation controller is the perfect option for basic residential solutions. Building upon Rain Bird’s legacy of The Intelligent Use of Water®, this controller offers simple water saving features that you will actually use. Designed for INDOOR and OUTDOOR use. 4, 6, 8 or 12 stations fixed 3 programs - 4 starttimes each - Manual Watering option for all stations, a single station or an individual program - Sensor bypass for all programs or for individual stations - Automatic short detect with station specific alarm mesWarranty 3 years 4 STATIONS
TM2-4
6 STATIONS
TM2-6
8 STATIONS
TM2-8
12 STATIONS
TM2-12
RAIN BIRD ESP-9V Get reliable automatic irrigation control when you don’t have AC power with the ESP-9V Series Battery-Operated Controller. The ESP-9V’s waterproof case and dual-sealed battery chamber ensure long life even when installed in a wet, muddy valve box. 1, 2, 4 or 6 stations fixed 6 starttimes per zone (1-240 minutes) - Waterproof case ensures long life even when installed in a valve box - 2 years of operation on two 9V batteries - Rain sensor bypass for all zones Warranty 2 years 1 STATIONS
ESP9V1
2 STATIONS
ESP9V2
4 STATIONS
ESP9V4
6 STATIONS
ESP9V6
- Wall mount kit - 1” Diverter Valve - 9V Solenoid
71
TORO DDCWP™ BATTERY CONTROLLER Looking for a rugged waterproof controller ideal for remote or isolated installations? Toro’s DDC™WP Series controller provides all that and more. Using the new potted DC latching solenoid, the DDC™WP is battery-operated using two 9V batteries. 2, 4, 6, or 8 stations fixed 3 programs - 9 starttimes - Fully waterproof and submersible - Operates DC Latching Solenoid - Seasonal Adjust Warranty 3 years - TRS Wired Rain Senosor 2 STATIONS
DDCWP-2-9V
4 STATIONS
DDCWP-4-9V
6 STATIONS
DDCWP-6-9V
8 STATIONS
DDCWP-8-9V
HYDRO-RAIN BATTERY TIMER Setting a new standard in battery operated controllers, the HRC 990 is the answer to those difficult situations when installing burial wire is not possible or desired. HRC 990 is tough enough for installation in a below ground, valve box environment while providing years of no hassle, reliable service. 4 stations fixed 2 programs
1 - 4 STN BATTERY TIMER
HRC-990
DC SOLENOID
HRC-990S
DC SOLENOID PIGTAIL
HRC-990P
RAINBIRD DV ADAPTER
HRC-990DV
RAINBIRD PEB ADAPTER
HRC-990PEB
WIRED RAIN SENSOR
HRC-100-RS
WIRELESS RAIN SENSOR
HRC-100-WRS
MOISTURE SENSOR
HRC-990MS
72
- Unique Water Tight Plug-in System - Battery Powered—Wire-free installation - Water Budgeting—Saves water Warranty 2 years
RAIN BIRD TBOS™ BATTERY CONTROLLER The TBOS-II battery-operated line of buriable irrigation controllers allows the use of automatic irrigation in challenging areas where AC power is not available. Its water saving programming features maximize water efficiency by letting you build highly-customized programs.
1, 2, 4 or 6 stations 3 programs - 8 starttimes each (1-360) minutes) - Flexible Programming - Time-Saving Programming - Advanced Water Management Warranty 3 years
TBOS-BT
STATION MODULES
1 STATION
TBOS-BT1
2 STATION
TBOS-BT2
4 STATION
TBOS-BT4
6 STATION
TBOS-BT6
TBOS-II
STATION MODULES
6 STATION
TBOS6
HOSE TIMER & ACCESSORIES 1
1 ZONE HOSE BIB TIMER
62061N
2
2 ZONE HOSE BIB TIMER
58910
3
4 ZONE HOSE BIB TIMER
58911
4
1 ZONE HOSE BIB TIMER
HRC-980
5
HOSE END FLOW METER
HEFM
6
MECHANICAL TIMER
MTIMER
7
SPRINKLER TIMER CABINET
CABINET
8
HOSE END FLOW METER
HEFM
9
DIG BATTERY HOSE TIMER, 1 ZONE B09D
4
5
6
1
2
7
3
8
9
NEW
73
CLIMATE LOGIC™ WEATHER-SENSING SYSTEM CLIMATE LOGIC KIT
CL-100
CLIMATE LOGIC SENSOR ONLY
CL-W1
CLIMATE LOGIC RECEIVER ONLY
CL-M1
CLIMATE LOGIC is an irrigation controller accessory that senses the weather on the landscape site and wirelessly transmits the data to its receiver which, in turn, changes the controller’s watering time based on the weather. The system also uses historical weather information for the site and previous days’ averaging in its calculations to irrigate the landscape appropriately for the local weather. Monitors air temperature. Monitors solar exposure. Detects rainfall. Mounts on the rain gutter w/Quick Clip or on a flat surface using stainless steel screws (provided). Wirelessly sends the data to the module up to 1000 feet away.
TORO RAIN SENSORS WIRED RAIN SENSOR
TRS
WIRELESS RAIN SENSOR
TWRS
Wireless has selectable water conservation modes delay resumption of irrigation by intelligently extending beyond mechanical reset time and can save you up to 30%* more water. Transmitting range: up to 500’ (152m) (line-of-sight) with adjustable antenna for unmatched range 25’ cable (white, UV-resistant) provides installation flexibility.
REMOTES HANDHELD/MINI-RECEIVER COMBO R-100-KIT HANDHELD REMOTE ONLY
CL-R1
MINI-REMOTE RECEIVER ONLY
CL-MR
KWIK DIAL REMOTE ADAPTER
CMR-ADP
MAINTENANCE REMOTE KIT
TMR-1-KIT
MINI-REMOTE
- Up to 1.5 mile range (line of sight) and typically ½ mile in urban areas - 1,000’ Line Of Site Range - Works with Climate Logic module without a special receiver
Both Remotes fit: Rain Dial-R Total Control-R KwikDial TMC-212 TMC-424 TMC-424-E
IRRITROL RAIN SENSORS WIRED RAIN SENSOR WIRELESS RAIN SENSOR
WIRELESS
74
WIRED
RS500 RS1000
300-foot transmission range offers virtually limitless installation options 25’ cable (white, UV-resistant) provides installation flexibility Fully adjustable shutoff points from 1/8” to 1” (3-25mm) of accumulated rainfall.
PRECISION SOIL SENSOR SOIL SENSOR KIT
PSS-KIT
The sensor will automatically detect the soil type and adjust all calculations accordingly. Can be installed on any irrigation controller, including competitive models.
4 ZONE MODULE
EMOD-4
12 ZONE MODULE
EMOD-12
SMART CONNECTOR
EVO-SC
WEATHER SENSOR
EVO-WS
MOISTURE SENSOR
PSS-SEW
HAND HELD REMOTE
EVO-HH
AUXILIARY RELAY
EVO-AR
The Toro Precision™ Soil Sensor reduces water waste by continuously measuring moisture levels in the soil and determining when to allow your controller to water, maximizing the efficiency of your irrigation system. Communication between the sensor probe and receiver is completely wireless, so installation is quick and easy with no digging required.
75
ELECTRIC VALVES 1. 2. 3.
ELECTRIC VALVES SOLENOIDS FLOWSENSOR
A solenoid valve is an electromechanical device in which the solenoid uses an electric current to generate a magnetic field and thereby operate a mechanism which regulates the opening of water flow in a valve. Solenoid valves differ in the characteristics of the electric current they use, the strength of the magnetic field they generate, the mechanism they use to regulate the fluid, and the type and characteristics of fluid they control. The mechanism varies from linear action, plunger-type actuators to pivoted-armature actuators and rocker actuators.
IRRITROL 2400 SERIES ELEC. VALVE Threaded jar-top design allows for removal of cap over the solenoid for easy in-ground maintenance Internal component swap-out can be done in minutes
F RICT I O N LO S S DATA MODEL
SIZE
2400 Series 1”
ELECTRIC VALVE
Flow Rate - GPM
.25
2
5
10
15
20
30
5.00
4.60
3.50
4.00
2.97
3.26
6.20
1" FIPT
2400T
IRRITROL 205 SERIES ELEC. VALVE ELECTRIC VALVE
A flat fiber washer diaphragm allows the 205 to work in a wide flow range as well as easily handle debris FRICTION LOSS DATA
1" FIPT
205TF
Flow Rate - GPM
MODEL
SIZE
.25
205 Series
1”
5.40 3.82 3.00 2.20 1.90°
2
5
10
15
20
30
3.10
5.10
IRRITROL 2500 SERIES ELEC. VALVE ELECTRIC VALVE IDEAL FOR DIRTY WATER APPLICATIONS Flow Rate - GPM FRICTION LOSS DATA
1" FIPT
76
2500TF
MODEL
SIZE .25
2500 Series
1”
2
5
10
15
5.40 3.82 3.00 2.20 1.90°
20
30
3.10
5.10
IRRITROL ULTRA-FLOW ELEC. VALVE ULTRA-FLOW VALVE
SELF-FLUSHING, 150 MESH STAINLESS STEEL FILTER STRAIGHT-THOUGH FLOW PATH PROVIDES A FLOW RANGE WITH MINIMAL FRICTION LOSS. FRICTION LOSS DATA
¾"
700B-.75
MODEL
1"
700-1
700B-.75
SIZE 0.1
¾”
Flow Rate - GPM 2
5
10
15
20
30
0.38 0.38 0.86 1.22 2.03 3.27 6.75
IRRITROL 200 COMMERCIAL VALVE ELECTRIC VALVE FLOW CONTROL
Bottom inlet plug and O-ring seal make this valve easy to convert from globe to angle. Rugged, double-beaded Santoprene® diaphragm ensures a leak-proof seal. FRICTION LOSS DATA MODEL SIZE GLOBE ANGLE
1-½"
216B
2"
217B
216B 217B
1 ½” 2”
G A G A
Fl ow Rate - G PM 20
30
40
50
60
80
100 120
3.04
2.66
2.33
2.97
4.14
5.62
2.76
2.24
1.99
2.30
3.10
4.42
2.00
1.93
1.73
1.55
1.68
2.99 4.85
6.31
2.00
1.93
1.73
1.55
1.59
2.15
4.88
3.27
IRRITROL CENTURY COMMERCIAL VALVE COMMERCIAL VALVE
ANTI/COM VALVE
1"
100P1
102P1
1-½"
100P1.5
-
2"
100P2
-
3"
100P3
-
FRICTION LOSS DATA
Flow Rate - GPM
RATED FOR MODEL SIZE GLOBE 5 10 20 30 40 50 ANGLE 200 PSI 100P1 G 6.30 4.20 3.20 4.10 7.20 10.90° 1” 102P1 A 6.30 4.20 3.10 2.70 4.80 7.90° GLOBE MODEL SIZE ANGLE 30 40 50 60 70 80 90° 100 110 G 1.60 2.30 3.60 5.20 7.00 9.20 11.70 14.40 17.50 100P1.5 1 ½” A 1.30 1.60 2.80 4.00 5.50 7.10 9.00 11.00 13.30 GLOBE
MODEL SIZE ANGLE 80 90° 100 110 120 130 140 150 175 G 2.10 2.70 3.30 4.00 4.80 5.60 6.50 7.50 8.60 100P2 2” A 1.20 1.60 2.00 2.40 2.80 3.30 3.90° 4.40 5.00
Self-cleaning/easy maintenance, each cycle cleans internal orifices. All parts are easily accessible without removing the valve.
GLOBE
MODEL SIZE ANGLE 150 175 200 225 250 275 300 G 2.50 3.00 4.10 5.30 6.70 8.30 10.10 100P3 3” A 1.90° 2.40 3.30 4.30 5.50 6.90° 8.50
IRRITROL 2700 SERIES COMBINATION VALVE AVB BONNET FC
AVB STEEL SCREW FC
BUILT IN BACK FLOW PREVENTION
ONLY USED FOR REPAIRS - NOT FOR NEW INSTALLS ¾"
2711DPR
2711APR
1"
2713DPR
2713APR
77
TORO EZ-FLOW VALVE WITH FC MIPT
1"
Easy to install, and even easier to service, Toro EZ-Flo® Plus Series valves are available in a comprehensive range of in-line or anti-siphon configurations that provide design and retrofit flexibility for any residential application. The EZFlo valves’ heavy duty jar top designs make servicing fast and simple without the need for removing screws or fasteners.
FIPT
EZF-21-04
EZ-Flo Plus Series Friction Loss Data
EZF-26-04
GPM Flow
.25
5
10
15
20
30
Friction Loss (PSI)
2.0
3.5
4.0
3.0
3.3
4.3
External bleed screw for system flushing
TORO P220 SERIES COMMERCIAL VALVE 220 PSI ELECTRIC VALVE
252 SERIES FC
BRASS EL. VALVE
1"
P220-26-04
1-½"
P220-26-06
252-26-06
220-26-06
2"
P226-26-08
252-26-08
226-26-08
3"
P226-26-00
Size
Configuration
1" (25mm)
Globe Angle
1½" (40mm)
Globe Angle
2" (50mm)
Globe Angle
3" (75mm)
Globe Angle
5
10
4.00 4.20 4.00 4.20
220-26-04
226-26-00
20
30
40
50
3.20 3.10
4.10 2.70
7.20 10.90° 4.z80 7.90°
1.60 1.30
2.30 1.60
3.60 2.80
60
70
80
90°
5.20 7.00 9.20 11.70 4.00 5.50 7.10 9.00 2.10 1.20
2.70 1.60
100
110
120
130
140
150
180
200
225
250
275
300
2.50 3.00 4.10 1.90° 2.40 3.30
5.30 4.30
6.70 8.30 10.10 5.50 6.90° 8.50
14.40 17.50 11.00 13.30 3.30 2.00
4.00 2.40
4.80 5.60 6.50 7.50 8.05 2.80 3.30 3.90° 4.40 5.10
HYDRO-RAIN ELECTRIC VALVE JAR TOP VALVE
¾" FIPT 1" FIPT 1" SLIP
78
AUTO VALVE W F/C
HRV-075-FF HRJ-100-FF
HRV-100-FF HRV-100-SS
HRJ 100 is easy to service with a union lid design that needs no tools for removal. Hydro-Rain HRV Series Valves are built for long life under multi operations daily water cycles. HydroRain sprinkler valves are built for use in variable landscapes including turf, shrub, desert, nursery stock, greenhouse, etc.
OPERATING RANGE
INSTALLATION SPECIFICATION DETAIL (without optional .700 adapter) - Width 3" (7,6 cm)
Pressure Regulator
PVC Mainline
ELECTRICAL SPECIFICATIONS
Finish Grade
30" Linear Length of Wire Coiled • Inrush Current: .30 A (7.2VA) at 60 HZ
PVC SCH 40 TEE or ELL
PVC Schedule 80 Toe Nipple (Length as Required)
3" Minimum Depth of 3/4" Washed Gravel
HRZ100 ALL IN ONE VALVE FILTER PRV • Flow: 0.1 to 5.0 GPM (0,4 to 18,9 LPM)
• 24 VAC 50/60 HZ (Cycles/Sec) Solenoid
Dry Splice Connector PVC SCH 40 ELL
HRZ 100 CUTAWAY
• Holding Current: .19 A (4.6VA) at 60 HZ
• Inlet Pressure: 20 to 120 PSI (1,4 to 8,3 BAR)
Filter
• Coil Resistance: 42–55 OHMS HRZ 100-30
1" Valve
INLET PRESSURE (PSI)
FLOW (GPM)
31.3
0.2
32.1
1.0
35.3
2.0
40.2
3.0
46.0
4.0
• Regulated Pressure: 20 PSI (1,5 BAR), An industry first. The HRZ Series all-in-one drip control zone lays claim to 30 PSI (2,1 BAR), 40 PSI (2,7 BAR) being the industry’s first “one piece” low-flow irrigation Brick zone valve, filter, and (1 of 4) • Filtration: 200 mesh filter regulator combination—so compact that it fits snugly in a 6" round valve box, and two• fit comfortably in a 10" box. On the outside, the HRZ control zone Dimensions: beats competition’s hands down by offering the strength, - Height 5 1/2"PVC (13,9construction cm) Length 9 3/8" (23,8 cm) friendliness of commercial-grade, glass-filled durability- and environmental (without optional .700 adapter) polypropylene. The internals are just as impressive. 52.3
5.0
INLET PRESSURE (BAR)
FLOW (LPM)
2,1
0.8
2,2
3.8
2,4
7.6
2,8
11.3
3,2
15.1
3,6
18.9
HYDRO-RAIN
- Width 3" (7,6 cm)
u
(ph) 888-493-7672 (fx) 801.203.1179
INLET PRESSURE REQUIRED TO MAINTAIN 30 PSI OUTLET PRESSURE
HRZ 100 Filter
55
HRZ 100 Valve
50
.700 HRZ 100 Tubing Adapter
45
40
Lateral Pipe
35
0.0
1.0
2.0
3.0
4.0
5.0
PVC SCH 40 ELL
• 24 VAC 50/60 (Cycles/Sec) Solenoid 2 IN HZ 1 FILTER/ MIPT FILTER/
u
techservice@hydrorain.com
u
25 Union Avenue, North Salt Lake, UT 84054
PVC SCH 40 TEE or ELL
PVC Schedule 80 Toe Nipple (Length as Required)
• Holding Current: .19 A (4.6VA) at VALVE 60 HZ 30 PSI
¾" x 1"
1" Valve www.rainbird.com/valves
Valves
DVF Series
DVF Series
INLET PRESSURE HRZ-100-FB-1x (PSI)
HRZ-075-FB-1x 31.3 DV and DVF Valve Pressure Loss (psi) Flow gpm 1 3 5 10 20 30 40
075-DV 3 ⁄4" psi 3.2 3.9 4.2 5.0 7.7 -
32.1 35.3
FLOW HRZ-100-MM-30 (GPM) 0.2 1.0 2.0
075-DV Flow 3 ⁄4" psi m3⁄h 3.2 0.23 3.9 0.60 4.2 1.20 5.0 3.60 7.7 4.50 -6.00 -9.00
l/m 4 10 20 60 75 100 150
www.rainbird.com/valves
Pressure Regulator
Water
Flow DV andMETRIC DVF Valve Path Pressure Loss (bar)
DV andLoss DVF(psi) Valve Pressure Loss (bar) DV and DVF Valve Pressure 100-DV/100-DVF Flow 1"gpm psi 3.31 3.63 3.85 3.810 5.120 6.430 8.640
3" Minimum Depth of 3/4" Washed Gravel
Filter
• Coil Resistance: 42–55 OHMS HRZ 100-30 Valves
HRZ 100 Pressure Regulator
HRZ 100 CUTAWAY
PRV 30 PRV/ELECTRIC • Inrush Current: .30 APSI (7.2VA) at 60 HZ
1"
6.0
Flow Rate [GPM]
PVC Mainline
ELECTRICAL SPECIFICATIONS
Valve Box with Cover
Pressure Regulator
Water Flow Path
Inlet Pressure [PSI]
Schedule 40 Female Adapter
100-DV/100-DVF 075-DV 3 1" psi ⁄4" bar 3.3 0.22 3.6 0.26 3.8 0.29 3.8 0.45 5.1 0.53 6.4 8.6 -
100-DV/100-DVF Flow l/m 1"m3⁄h bar 0.23 0.23 4 0.24 0.60 10 0.26 1.20 20 0.32 3.60 60 0.35 4.50 75 0.41 6.00 100 0.59 9.00 150
Valves
075-DV ⁄4" bar 0.22 0.26 0.29 0.45 0.53 -
3
METRIC 100-DV/100-DVF 1" bar 0.23 0.24 0.26 0.32 0.35 0.41 0.59
Valves
PGA Series Valves
INLETDVF PRESSURE Series REQUIRED TO DVF Series MAINTAIN 30 PSI OUTLET PRESSURE
Versatility at an affordable RAIN BIRD DV SERIES COMMERCIAL VALVEprice. 55
3.0
100-DV/DVF Angle, MxB Valve Pressure Loss (psi) 100-DV/DVF Angle, MxB 100-DV/DVF Valve Pressure Angle, MxB LossValve (psi) Pressure Loss (bar)100-DV/DVF METRIC Angle, MxB Valve Pressure Loss (bar)
4.0
52.3
Male Flow x barb 1"gpm psi 2.51 2.93 3.05 3.110 4.320 7.430 12.7 40
l/m 4 10 20 60 75 100 150
MaleAngle x barb 1" psi 1" bar 2.5 0.19 2.9 0.20 3.0 0.22 3.1 0.28 4.3 0.30 7.4 0.35 12.7 0.56
Male Flowx barb 1"m3/h bar 0.17 0.23 0.19 0.60 0.21 1.20 0.26 3.60 0.30 4.50 0.44 6.00 0.86 9.00
Note: See Xerigation section (page 205) for RBY Filter flow loss data Note: See Xerigation section (page 205) for RBY Filter flow loss data
FC TxT
Note: DV/DVF Male x barb not recommended for flows exceeding Note: 30 gpm DV/DVF (6.81Male x barb not recommended for flows exceeding 30 gpm (6.81 m3/h, 113.56 l/m)
m3/h, 113.56 l/m)
2,1 2,2 2,4
100-DVF-SS 100-DVF
100-DVF
2,8
1"
3,2 100DVF 3,6
l/m 4 10 50 20 60 75 100 150
Angle 1" bar 0.19 0.20 0.22 0.28 0.30 0.35 0.56
METRIC
Male x barb 1" bar 0.17 0.19 0.21 0.26 0.30 0.44 0.86
• Inrush current: 0.41 A (9.84 VA) at 60 Hz Whether the job calls for a globe or angle DV and DVF DVchoice. and DVF Valve Pressure Loss (psi) DV DVFVA) Valve Pressure Loss (psi) • Holding current: 0.28and A (6.72 at 60 Hz valve, PGA Series valves ECONOMICAL are the right IRRIGATION • AND Coil075-DV resistance: 30-39 Loaded heavy-duty PVC FlowOhms100-DV/100-DVF 075-DV 1 Flow VALVE C/Wwith features, these FLOW VALVE FORFlow RESIDENTIAL 3 3 45 (LPM)valves are economical, easy to gpm ⁄4" psi gpm 1" psi ⁄4" psi 1 install and built m3⁄h FC SxS LIGHT COMMERCIAL APPLICATIONS 0.23 1 3.2 3 1 bar) pres- Models 3.2 3.3 150 psi (10,35 0.8 to withstand constantWHERE FLOW CONTROL IS RE0.60 3 1” 3.9 3 3 m3/h; 3.9 3.6 sure and 2 to 150 gpm (0,45 40 to 34,05 • 100PGA (26/34) QUIRED. 3.8 1.20 5 4.2 3 5 4.2 3.8 7,8 to 568 l/m) flows. 1 • 150PGA 1 ⁄2” (40/49) 3.60 10 5.0 3 10 5.0 3.8 7.6 • 200PGA 2” (50/60) The PGA Series from Rain Bird – built to last… design 4.50 20 7.7 5 20 7.7 5.1 Double-filtered pilot-flow for max35 BSP threads available; specify when ordering. 11.3 and last! 6.00 6 6.4 imum reliability. 30Balanced-pressure dia- 30 9.00 40 8 40 8.6 15.1 100DVFSS phragm for 1.0 long life. Dimensions 0.0 2.0 3.0 4.0 5.0 6.0 PSI Features Pressure: 15 to 150 5.0
VALVE C/W INLET PRESSURE (BAR)
Flow Angle 1" psi m3/h 0.23 2.8 0.60 3.0 1.20 3.2 3.60 3.9 4.50 4.3 6.00 5.4 9.00 8.2
18.9
100-DVF-SS
Valves
Angle 1" psi 2.8 3.0 3.2 3.9 4.3 5.4 8.2
gpm 1 3 5 10 20 30 40
Inlet Pressure [PSI]
46.0 Flow
Valves
40.2
Size
Height
Length
Width
Rate [GPM] • Globe and angle configuration for flexibility Flow 31⁄4” (8,3 cm) 100PGA 71⁄4” (18,4 cm) 51⁄2” (14,0 cm) in design and installation. 31⁄2” (8,9 cm) 150PGA 8” (20,3 cm) 63⁄4” (17,2 cm) • Rugged PVC construction 3 100-DV/DVF Angle, MxB Valve Pressure 100-DV/DVF Loss (psi) Angle, MxB 100-DV/DVF Loss ⁄ 4 ” (19,7 cm) (12,7 cm)Valve Pressure 200PGA 10” (25,4 cm) 7 HYDRO-RAIN u (ph) 888-493-7672 (fx) 801.203.1179 u techservice@hydrorain.com u 25 Union Avenue, North Salt Lake, UT 5” 84054 • Filtered pilot flow to resist debris and Note: The PRS-D option adds 2” (5,1 cm) to valve height. Flow Flow Angle Flow Male x barbAngle M 89 89 The Intelligent Use of Water. The Intelligent Useclogging of Water. of solenoid ports. gpm 1" psi gpm 1" psi 1" psi 1 m3/h • Slow closing to prevent water hammer and 0.23 1 2.8 1 2.5 2.8 2 subsequent system damage. 3 ELECTRIC 0.60 3.0 3 2.9 3.0 2 • Manual internal bleed operates the PGA 3.2 Series Valve5Pressure3.0 Loss (psi) 3.2 VALVE 1.20 5 valve 3 Whether the job calls forvalve a box. without allowing water into the 3.60 10 3 Flow 3.9 100100- 10 150150-3.1 200- 3.9 200gpm PGA PGA PGA PGA PGA PGA • One-piece design with captured globe orsolenoid angle valve, PGA20 4.50 4.3 4.3 Globe 4.3 4 Globe Angle 20 Globe Angle Angle plunger spring for the easy right servicing. 1" 1" 1 ⁄ "7.4 2" 2" Series and valves are 6.00 30 5.4 301 ⁄ " 5.4 7 1 5.1 4.3 Prevents of parts during field40service. 9.00 8.2 40-8.2 1 choice.loss Loaded with fea5 5.5 5.0 - 12.7 10 5.9 5.5 • tures, Non-rising flowheavy-duty control handlePVC adjusts Note: See Xerigation section (page 205) for RBY Note: Filter See flow Xerigation loss data section (page 205) for RBY Filter flow loss da these 20 6.0 5.6 water flows needed. 30 not recommended 6.4 5.5 for 1.9DV/DVF 1.3Male30 - not Note: DV/DVF Male x barb Note: flows exceeding x barb gpm (6.81 recommended for flows exceedin valves areaseconomical, easy 100PGA 40 7.0 7.5 3.2 2.0 1.2 1.0 • Normally closed, forward flow design. m3/h, 113.56 l/m) m3/h, 113.56 l/m) 100-DVF-A
100-DVF-A 100-DVF-MB
100-DVF-MB
RAIN BIRD PGA COMMERCIAL VALVE ™
™
1
1" 1-½"
150PGA
2"
200PGA
to install and built to withstand constant 150 psi
Options (order separately)
50 75 100 125 150
-
-
2
4.8 11.1 19.2 -
1
2
3.0 6.5 11.7 -
1.5 3.0 5.5 8.6 12.0
0.9 1.7 3.0 4.8 6.5
• Accommodates optional, field installed PRS-D pressure regulating module. PGA Series Valve Pressure Loss (bar) • Optional purple flow control handle for easy identification of non-potable water Flow Flow 100- 100- 150- 150- 200- 200m3⁄h I/m PGA PGA PGA PGA PGA PGA system. 100-DVF Globe Angle Globe 100-DVF Angle Globe Angle 100-DVF-SS 2,5cm 2,5cm 3,8cm 3,8cm 5,1cm 5,1cm - PGA-NP-HAN (1” and 11⁄2”) 0,23 3,8 0,35 0,30 - PGA-NP-HAN2 (2”) 0,6 10 0,36 0,32 PGA Series Te 1,2 20 0,38 0,35 • Accepts latching solenoid for use with Rain 3 50 0,41 0,38 Water Temp. Bird battery-operated controllers up to 150 6 100 0,43 0,38 0,10 0,07 -
79 73˚ F
(23˚ C)
• Ambient Temperature: 35°F to 140°F • Electrical: 24Vac, inrush current 291 mA, holding current 237 mA Applications Landscape, home gardens, greenhouses and nurseries. Above or below
EZYVALVE™
Pressure Loss
4 ZONE MANIFOLD EZY4 REPLACEMENT DIAPHRAGM EZY4 REPLACEMENT SOLENOID
EZY4 EZY4-D EZY4-S
FLOW RATE (gpm)
PRESSURE LOSS (psi)
3 4 5 6 7 8
5 9 14 20 27 34
EZYVALVE is a compact valve box with 4 internal solenoid valves, that connects to a 24Vac controller.
Pressure Loss
VALVE PRESSURE REGULATOR eZyvalve®4
FITS TORO 220 BRASS AND P220 PLASTIC ELECTRIC VALVES
0 - 100 PSI REGULATOR
EZR-100
FITS IRRITROL 100, 200 AND 700 SERIES ELECTRIC VALVES
15 - 100 PSI REGULATOR
OMR-100
eZyvalve®4 TYPE eZyvalve®4 - Valve Box 4 Solenoid Valves 3/4” NPT 24Vac
FITS RAIN BIRD PGA, PEB, PESB ELECTRIC VALVES
15 - 100 PSI REGULATOR
PRSDIAL
VALVE SOLENOID
LWS
4.1 in
Inlet - 3/4” NPT
WIDTH
7.2 in
Outlet - 3/4” NPT x 4
DEPTH
7.2 in
WEIGHT (approx) 2 lb 6 oz
www.antelco.com
STANDARD 24V SOLENOID
SOLASSG4
AC SOLENOID
FOR HYDRO-RAIN VALVES AND CONTROLLERS HRJ SERIES SOLENOID
HRJ-SOL
HYDRO-RAIN DC SOLENOID
HRC-990S
80
TORO DC SOLENOID RAIN BIRD DC SOLENOID
R811-24VAC
ANTELCO CORPORATI Tel +1 407 331 0699 Fax +1 407 331 0169 Email info@antelco.c
Scan the barcode with your ipho and check out our website!
FITS HUNTER VALVES
FITS RAIN BIRD DV 100 VALVES RPKSOLENOI
1
PAC CA
CONNECTION TYPE
Putting water where it counts!® FITS IRRITROL AND TORO VALVES
PGA/PEB SOLENOID
16615
HEIGHT
FITS MOST IRRITROL AND TORO VALVES BUT OPENS AT .12 AMPS INCREASING WIRE RUNS
STANDARD 24V SOLENOID
PACK QUANTITY
Specifications DIMENSIONS PACKAGED
LOW WATTAGE SOLENOID
PART NUMBER
606800
110 VOLT FITS MOST IRRITROL AND IRRITROL VALVES 110 V SOLENOID
DCLS-P TBOSPSOL
FOR BATTERY CONTROLLERS
504-059
per second proportional to flow velocity).
FLOW SENSOR FLOW SENSOR
Model
½"
TFS-050
¾"
TFS-075
1"
TFS-100
1-½"
TFS-150
2"
TFS-200
3"
TFS-300
4"
TFS-400
• TFS-050 • TFS-075 • TFS-100 • TFS-150 • TFS-200 • TFS-300 • TFS-400
TFS Series Model List Suggested Operating Description Range: 1/2” (13mm) Flow Sensor 3/4” (20mm) Flow Sensor 1” (25mm) Flow Sensor 1½” (37mm) Flow Sensor 2” (50mm) Flow Sensor 3” (75mm) Flow Sensor 4” (100mm) Flow Sensor
1.2-12 GPM (4,5-45 LPM) 2.7-28 GPM (10,2-65 LPM) 5-50 GPM (18,9-189 LPM) 5-100 GPM (18,9-379 LPM) 10-200 GPM (38-757 LPM) 20-300 GPM (76-1135 LPM) 40-500 GPM (151-1892 LPM)
- 1 ½”, 2”, 3” a • Tee: - 1/2”, 3/4” and - 1 ½”, 2”, 3” a Schedule 80 PV • Sensor Housing: • Impeller: - 1/2”, 3/4” and - 1 ½”, 2”, 3” a Glass-filled nylo • Shaft: Tungsten • Bearing: UHMW • Wires: 18AWG d
Warranty • Two years
Specifying Information— TFS-XXX Model TFS TFS—Flow Sensor
Co 050—1/2” (13mm) Plastic Tee 075—3/4” (20mm) Plastic Tee 100—1” (25mm) Plastic Tee 150—1 1/2” (37mm) Plastic Tee
81
WIRE 1. 2. 3.
MULTI-STRAND WIRE LIGHTING WIRE WIRE CONNECTOR
MULTI-STRAND WIRE 2 CONDUCTOR
18-2
4 CONDUCTOR
18-4
5 CONDUCTOR
18-5
7 CONDUCTOR
18-7
9 CONDUCTOR
18-9
10 CONDUCTOR
18-10
12 CONDUCTOR
18-12
13 CONDUCTOR
18-13
ALL WIRE IS ALSO AVAILABLE IN CUSTOM LENGTHS
LIGHTING WIRE 10 GAUGE
12 GAUGE
ft.
10-2-ft
12-2-ft
250’
10-2-250
12-2-250
500’
WHITE 12 GAUGE
12-1W-ft 12-1W-500
1000’
WIRE CONNECTOR 14G - 22G SPEED SEAL
12G - 18G SPEED SEAL
6G - 12G SPEED SEAL
SINGLE
HR-ORANGE
HR-BLUE
HR-TAN
BAG OF 25
HR-ORANGE-25
HR-BLUE-25
-
JUG
HR-ORANGEJUG
HR-BLUEJUG
HR-TANJUG
82
Hydro-Rain’s SpeedSeal UL 486D listed Waterproof Wire Connectors give contractors the finger traction and easy single step installation when splicing wire as needed in wet or dry situations. Corrosion proof SpeedSeal connectors provide an ergonomic grip pattern and distinctive color combinations.
NON-FILLED HEAT SHRINK
DBRY
DCB
NON-WATER PROOF CON.
ORANGE
8G-14G SINGLE HEAT SHRINK
HS-4B
8G-14G 4 PACK HEAT SHRINK
HS-4
14G-10G HEAT SHRINK
STAKONS
DIRECT BURY SILICONE GORILLA NUT
DBRY
DIRECT BURY SILICONE GORILLA NUT 100PK
DBRY-100
DRYCONN BLACK
DCB
WIRING DISTANCES IN FT. Wire size is another important factor in determining voltage drop. Larger wire sizes (those with a greater diameter) will have less voltage drop than smaller wire sizes of the same length. In American wire gauge, every 6 gauge decrease gives a doubling of the wire diameter, and every 3 gauge decrease doubles the wire cross sectional area. In the Metric Gauge scale, the gauge is 10 times the diameter in millimeters, so a 50 gauge metric wire would be 5 mm in diameter. Still another critical factor in voltage drop is wire length. Shorter wires will have less voltage drop than longer wires for the same wire size (diameter). Voltage drop becomes important when the length of a run of wire or cable becomes very long. Usually this is not a problem in circuits within a house, but may become an issue when running wire to an outbuilding, well pump, etc.
Watts
"Approx Fixtures (4watts ea)"
16 GAUGE
12 GAUGE
12V
13V
14V
15V
12V
13V
14V
15V
12V
10 GAUGE 13V
14V
15V
4
1
1485
2035
2585
3135
5063
6938
8813
10688
8
2
743
1018
1293
1568
2531
3469
4406
5344
12
3
495
678
862
1045
1688
2313
2938
3563
16
4
371
509
646
784
1266
1734
2203
2672
20
5
297
407
517
627
1013
1388
1763
2138
24
6
248
339
431
523
844
1156
1469
1781
28
7
212
291
369
448
723
991
1259
1527
32
8
186
254
323
392
633
867
1102
1336
36
9
165
226
287
348
563
771
979
1188
40
10
149
204
259
314
506
694
881
1069
50
13
119
163
207
251
405
555
705
855
60
15
99
136
172
209
338
463
588
713
70
18
85
116
148
179
289
396
504
611
80
20
74
102
129
157
253
347
441
534
90
23
66
90
115
139
225
308
392
475
100
25
203
278
353
428
322
441
560
679
120
30
169
231
294
356
268
368
467
566
140
35
145
198
252
305
230
315
400
485
160
40
127
173
220
267
201
276
350
425
180
45
113
154
196
238
179
245
311
377
200
50
101
139
176
214
161
221
280
340
250
63
81
111
141
171
129
176
224
272
300
75
68
93
118
143
107
147
187
226
83
PIPE 1. 2. 3. 4. 5. 6. 7. 8. 9.
PVC PIPE POLY/MUNI PIPE FLEX PIPE PEX PIPE BLU-LOCK DRIPLINE MICRO TUBING AQUATRAXX DRIP TAPE ACCESSORIES
PVC PIPE 20 ft. STICK CLASS
20 ft. STICK SCH 40
½"
PVC200-005
PVC40-005
¾"
PVC200-007
PVC40-007
1"
PVC200-010
PVC40-010
1-¼"
PVC200-012
PVC40-012
1-½"
PVC200-015
PVC40-015
2"
PVC200-020
PVC40-020
2-½"
PVC200-025
3"
PVC200-030
PVC40-030
4"
PVC200-040
PVC40-040
ALSO AVAILABLE IN 5 FOOT INCREMENTS
FITTINGS TO USE: PVC40 (Page 5 - 8) PVC LOCK (Page 12)
POLY/MUNI PIPE 100 ft. ROLL POLY
100 ft. ROLL MUNI
200 ft. ROLL MUNI
½"
P100-005
¾"
P100-007
P200-007
P200-007-200
1"
P100-010
P200-010
P200-010-200
1-¼"
P75-012
P200-012
1-½"
P75-015
P200-015
2"
P75-020
P200-020
84
POLY PIPE boasts a 100 PSI pressure rating Municipal Poly is rated for 200psi and is CSA approved for water services
FITTINGS TO USE: INSERT for POLY (Page 10) PHILMAC for MUNI (Page 17)
THE FUTURE OF IRRIGATION THE FUTURE OF IRRIGATION
FLEX PIPE ½"
ft. ROLL Built for100 Speed™ FLEX005-100 BY
¾"
GREAT FOR WATER TYPICAL SPRINKLER INSTALLATION GARDENS. OUT SPECIFICATION DETAIL LASTS OTHER KINK Working in a sprinkler trench is tough enough—don’t make it Lawn FREE TUBING
FLEX010-50
1-¼" 2" (1,3 cm) Fittings
TYPICAL SPRINKLER INSTALLATION 1-½" FLEX015-50 g pressure: 80 PSI (5,5 Bars) at 72°F (23°C) SPECIFICATION DETAIL ure: Exceeds2" 220 PSI (15,2 Bars) FLEX020-50 essure: 10-80 PSI (0,69-5,5 Lawn Bars) 2-½" FLEX030-50 ial: ABS Finish Grade ing Material: Stainless Steel al: EPDM
BL Fittings:
BY
Built for Speed™
FLEX007-100
1"
NS
200 psi rating for sizes ¾” and up
50 ft. ROLL
Working in a spri harder by using tr toxic glue, clamps a better way: Blu-
harder by using traditional pipe fitting methods that require hot, Finish Grade FITTINGS toxic glue, clamps or frustrating barbed fittings. Hydro-Rain offers TO USE:Everything you do a better way: Blu-Lock. PVC40 (Page 5-8) easier with Blu-L
Lock system, you
Everything you do from theUse valve out, you can now do faster and at Side Inlet Optional easier with Blu-Lock. Primer? Glue? Clamps? Tools? With the BluLock system, you don’t need them! BLJ-050-BM-50 (37985)
PEX PIPE
Use at Side Inlet Optional
Simply stated, Blu irrigation installa
THE FUTURE OF IRRIGATION g pressure: 125 PSI (8,5 Bars) at 72°F (23°C) Simply stated, Blu-Lock by Hydro-Rain is the fastest, greenest, BLP-050-CL-1X (37980) BLJ-050-BM-50 (37985) ure: Exceeds 250 PSI (17,2 Bars) irrigation installation method in the world. 100 ft. FUTURE ROLL OF IRRIGATION THE essure: 10-125 PSI (0,69-8,6 Bars) BLE-050-BL-ST BLP-050-CL-1X ½" PEX-005 (37980) (37970) ial: ABS PEX pipe canBUILT be used FOR SPEED ADvANTAGES ing Material: ¾" Stainless Steel for hot or cold water PEX-007 BLE-050-BL-ST • Patented “Push-and-Go” Design—100% tool and chemical (37970) al: EPDM BLT-075-BB-50
1"
Fittings:
PEX-010
free approach cut installation time in half.
Built for Speed™
BY
BUILT FOR SPE THE
• Patented “P free approach
(37373)
• True System Integration—Total compatibility ofFITTINGS fittings, TO USE:
• True System pipe, manifold
BY BLT-075-BB-50 ng Pressure: 150 PSI (10,3 Bars) at 72°F (23°C) • Exclusive Tre for Speed™BLP-075-SL-20 (37373) pipe, manifolds, valves, Built saddles, and heads. SHARKBITE (Page 18)straight length ure: Exceeds 350 PSI (24,1 Bars) (37381) PHILMAC essure: 10-150 PSI (0,69-10,3 Bars) Trenchless Technology — Coil and (Page 17) Working in a sp 1" (2,54 Cm)• Exclusive Trench 3/4"and (1,9 Cm) SPRINKLER BLP-075-SL-20 SPECIFICATIONS TYPICAL INSTALLATION ial: ABS BUILT FOR straight pipe options provideLOSS unrivaled flexibility. PIPE PRESSURE LOSSlengthPIPE PRESSURE (37381) SPECIFICATION DETAIL harder by GRE using SPECIFICATIONS TYPICAL S • Blu-Lock® 1/2"Steel (1,3 cm) Fittings ing Material: Stainless toxic glue, clam 3/4" (1,9 Cm) Flow Velocity Pressure Flow Velocity LawnPressure • Blu-Lock Pipe · Max working pressure: 80 PSI (5,5 Bars) at 72°F (23°C) • Blu-Lock® (1,3 cm) Fittings (FPS) al: EPDM PIPE PRESSURE LOSS BUILT FOR GREEN ADvANTAGES a better way: B (GPM) (FPS) Loss 1/2" (GPM) Loss OSS
BLU-LOCK PIPE
· Burst Pressure: Exceeds 220 PSI (15,2 Bars)
· Working Pressure: 10-80 (0,69-5,5 Bars) Blu-Lock and Swing PipePSI Pressure Lateral Flow Velocity Pressure
¾”x100’ Pressure: Exceeds BLP-007 · Burst 250 PSI (17,2 Bars) 0.46 4 2.41 1.64 3/4" ( 1,90· Working cm) Blu-Lock Lateral Pipe: Pressure: 10-125 PSI (0,69-8,6 Bars) ¾”x300’ BLP-007-300 0.76 5 3.01 2.46 ure Rating:· Body 320 PSI (22,06ABS Bars) at 72°F (23°C) Material: 1”x100’ BLP-010 · PSI Retaining Ring Stainless 1.06 100 6 3.61 3.45 Steel essure: (6,89 Bars)Material: · Seal 1”x300’Material: nsions: (2,4 cm),EPDM 1"4.21 1.21BLP-010-300 (3,074.59 cm) 1.37 3/4" .944 7
2 3
-•
4
1.48
1
Loss (GPM) (FPS) Loss · Body Material: ABS ressure: 120 PSI (8,2 Bars) BLUE Steel BLCA K (PSI) (PSI) · Retaining Ring Material: Stainless ss at 6 GPM: 5 PSI (0,3 Bars) BLU-LOCKPIE 1 0.60 BLU-LOCKPIE 0.15 · Seal Material: EPDM nsions: .59" (1,5 cm) - • 3/4" (1,9 cm) 2 1.20 0.48 BL Fittings: nsions: .43" (1,1 ½”x100’cm) BLP-005 · Max working pressure: 125 PSI (8,5 Bars) at 72°F (23°C) 1.80 1.00 ess:- .08" (0,2 cm) 3
9
•
• 1.86 2.23 2.60
11
2.76
1.20
0.48 Use at Side Inlet Optional
BLU-LOCK PIPE 1.00 diameter (OD) · Retaining Ring Material: Stainless Steel Blu-Lock Fittings 3 are Green 1.80 —Outside
• And Both arU Simply stated, irrigation instal installation pro B of your crew.
· Seal Material: EPDM technology ensure lower friction loss for better(37985) efficiency. BLJ-050-BM-50 0.46 4 2.41 1.64
½” x 20’ BLP-005-20 3/4" (1,9 cm) BL Fittings:
And Chemical Free —Glueless, 5 125 PSI (8,5 3.01 2.46 · MaxBoth working pressure: Bars) at 72°F (23°C) tool-free BLP-050-CL-1X (37980) ¾” x0.76 20’ are BLP-007-20
BUILT FOR SP B
installation protects · Burst Pressure: Exceeds 250environment PSI (17,2 6 the 3.61 Bars) and 3.45 the long-term health x1.06 20’ BLP-010-20 · your Working Pressure: 10-125 PSI (0,69-8,6 Bars) BLE-050-BL-ST of1” crew. (37970)
1.37 4.21 · Body Material: ABS 7 · Retaining Steel 1.80 Ring Material: 8 Stainless4.81 FEATURES AND BENEFITS · Seal Material: EPDM
2.97
3.34
10 Pressure: 6.02 · Working 10-150 PSI8.85 (0,69-10,3 Bars) 12 Maximum Pressure pressure ·valve-out outdoor irrigation connections only. Body 11 Material: ABS 3.07 6.62 10.60 400 13 · Retaining Ring Material: Stainless Steel 380 3.85 12 7.22 12.40 386 14 · Seal Material: EPDM essure 360
400
15
340
5.10
2
Everything you
F • Blu-Lock easier withFitt Blu technology ens Lock system, y
2.23
9
5.41
FEATURES AND • Patented “ free approac • Heavy-Duty C • True Syste UV-resistant A manifo andpipe, tested to e
4.59
5.85
BLT-075-BB-50 (37373)
7.29
• Construction—Built tough fittings made from • Heavy-Duty 1" (2,5 cm) BL Fittings: 3.71 2.76 10 6.02 8.85 · Max Working Pressure: 150 PSI (10,3 Bars) at 72°F (23°C) FITTINGS TO USE: BLULOCK (Page 11) • Exclusive T UV-resistant ABS, stainless steel and EPDM seals are designed BLP-075-SL-20 • Patented Re 4.08 3.07 · Burst Pressure: Exceeds 11 350 PSI (24,1 6.62 Bars) 10.60 straight leng (37381) and tested to ensure toughness. tight for a stron · Working Pressure: 10-150 PSI (0,69-10,3 Bars) 1" (2,54 Cm) 3/4" (1, 4.45 1" (2,54 3.85 Cm) 12 7.22(1,9 Cm) 12.40 3/4" · Pressure Body Material: ABS Maximum PIPE PRESSURE LOSS PIPE PR • Patented Retaining System —Stainless steel teeth grip pipe BUILT FOR GR PIPE PRESSURE LOSS PIPE PRESSURE LOSS • Outside Diam 4.83 4.45 Ring Material: 13 Stainless7.82 14.40 · Retaining Steel 436 tight forVelocity a strong, leak-proof connection. Flow Velocity Pressure Flow for 25 percent Flow Pressure
10
AwAY 4.45 13 7.82 14.40 • 1/2" (1,3 cm) Blu-Lock Lateral and Swing340Pipe
· Body -Material: ABS
-
BLP-007B5 6 BLP-007-300B 7 BLP-010B 8 BLP-010-300B
nsions: 3/4" .824" 8(2,1 1.07" (2,71 cm) BLcm), Fittings: 1.80 • 1" (2,5 cm) 4.81 5.85 ess: .060" (0,2 cm) · Max Working Pressure: 150 PSI (10,3 Bars) at 72°F (23°C) 2.23 9 5.41 7.29 Burst Pressure: Exceeds 350 PSI (24,1 Bars) 74 lbs. (0,03· Kg)
recyclable HDP L
· Max(PSI) working pressure: 80 PSI (5,5 Bars)Finish at 72°F(PSI) (23°C) Grade
· Burst Pressure: 220 PSI (15,2 Bars) • Blu-Lock PipeExceeds is Green —Environmentally-friendly, 1 0.60 0.15 · Working Pressure: 10-80 PSI (0,69-5,5 Bars) recyclable HDPE pipe provides BLUE a superior alternative to PVC.
380
5.2
· Seal5.10 Material: EPDM 14 (FPS) Loss
(GPM)
Flow 8.42 (GPM)
Velocity 16.50 (FPS)
Pressure Loss
(GPM)
(FPS)
• (OD) —Flow (PSI) (PSI)is unimpeded • Outside 1/2" (1,3 cm)Diameter Blu-Lock Lateral andTechnology Swing Pipe18.70 5.57 5.76 15 9.02 1 (8,2flow Bars) for 25 326 percent increase traditional 1 · Operating - Pressure: -120 PSIin 1 versus 0.60 0.15 insert fittings.
360
320
PSI
-
1.86 2.23 2.60 2.97 3.34
RESIDENCE
WHERE, U.S.A.
386
14
360
360 Stainless steel
340
340
320
North Salt Lake, UT 84054
436
5.2
7.82
5.10
14
8.42
16.50 320
20
300
304
280
Blu-Lock™
7.42
PSI
320
280
Blu-Lock™
9.90
4.45
3.85
4.83
4.45
436
5.10
5.57
5.76
320
7.42
300
25
Barb Fitting
9.98
280
1” Blu-Lock™
8
UV-resistant 10 and tested to 11
12 • Patented R tight for13a st
5.2
14
• Outside Di 15 for 25 percen
326
9.90
PSIQualit vS. • HYDRO-RA High pipe are PSIma
14.90
1” Insert Fitting
PSI vS. FLOw RATE*INCREASED FLOw u RATES u 9 HYDRO-RAIN 801.203.1179 www.hydrorain.com 9.98 14.90 u (ph) 888-HYDRORAIN (fx) • Patented 300
25
Barb Fitting
280
1” Blu-Lock™
1” Insert Fitting
PSI
INCREASED FLOw RATES I.D. (Inside Diameter)
304
3.07
340
20
300
FEATURES AN
1.80
2.76
360
5
*Minimum burst pr 2.23• Heavy-Duty 9 See specifications
4.08
380
15
340
0.76
of your 6creww • 1.06 Hydro-Rain 1.37 7 30-year limited
Maximum Pressure
14
360
14.40
u ring. www.hydrorain.comretainer 915 Overland Street, North15Salt Lake, 15 5.57 5.76 9.02UT 84054 18.70 326
PSI
Stainless steel retainer ring. Overland Street,
u
PSI
CUTAwAY u (ph) 888-HYDRORAIN (fx) 801.203.1179 AIN BLU-LOCK
380
13
3
• Patented Qu a 0.46• And Both 4 feature quick-r installation p
3.71
400
PSI
380
380
Maximum Pressure
400CUTAwAY BLU-LOCK 13 4.83 4.45
400
technology e
-
1.48
Inches
PSI
Inches
Maximum Pressure * For non-constant pressure valve-out outdoor irrigation connections only.
1” Insert Fitting
915
-
400
Blu-Lock (GPM) P recyclable H
• High Quality 1 • Blu-Lock F pipe are made 2
-
14 8.42 2 20 7.42 9.90 loss at 6 GPM: 5 PSI (0,3 Bars) Operating Pressure: 120 PSI 16.50 (8,2 Bars) 320 · Pressure 300 300 2 - vS. FLOw 2 RATE* 1.20 0.48 PSI 5.76 15 loss at 9.02 18.70 3 • High Quality and “Easy-Flex” —Blu-Lock lateral and swing Pressure 6 GPM: 5 PSI (0,3 Bars) 304 · Outer Dimensions: .59" (1,5 cm) 25 9.98 14.90 326 280 280 3 · Inner Dimensions: - (1,1 cm) 3 1.00 Outer Dimensions: .59" (1,5 cm) .43" pipe made from and1.80 meet ASTM standards.4 Blu-Lock™ Barb Fitting 1” Blu-Lock™ 1”are Insert Fitting 9.90 PSIvirgin resins 1" 3/4" .08"0.46 (0,2 cm) 4 · Wall Thickness: 1.48 Inner .43" (1,1 cm) 4 2.41 1.64 5 GPM GPM PSI Dimensions: vS. FLOw RATE* INCREASED FLOw RATES 14.90 • Patented Quick-Release Collar3.01 —1/2" swing fittings 6 Wall Thickness: .08" (0,2 cm) 5 (2,54 cm) 1.86 0.76 cm) Blu-Lock 5 Lateral 2.46 • 1" & 3/4" ( 1,90 Pipe: 40 11 8 1” Insert Fitting I.D. (Inside Diameter) I.D. (Inside Diameter) PSI 1" 3/4" feature quick-release mechanism that allows tool-free removal. 0.50 1.10 Rating: 72°F (23°C) 3.45 7 6 · Burst Pressure 2.23 1.06 320 PSI (22,06 6 Bars) at 3.61 • 1" (2,54 cm) & 3/4"GPM ( 1,90 cm) Blu-Lock GPM Lateral Pipe: 50 13 9 1.06 · Working Pressure: 100 PSI (6,89 Bars) 8 0.45 at 72°F (23°C) 1.00 • Hydro-Rain · Burst40 Pressure Rating: 320 PSI (22,06 Bars) 7 2.60 1.37 7 4.21 4.59 warranty —3-year limited warranty on fittings, 11 8 Diameter) 60.944 (2,4 cm), 14 1" 1.21 (3,07 10cm) · Outer Dimensions: 3/4" · Working Pressure: 100 PSI (6,89 Bars) 0.40 0.43 9 0.90 8 2.97 1.80 8 4.81 restrictions 5.85 30-year limited warranty on pipe. Some apply. · Inner Dimensions: 3/4" .824" (2,1 cm), 1.07" (2,71 cm) 9 70 16 11 · Outer50 Dimensions:133/4" .944 (2,4 cm), 1" 1.21 (3,07 cm) 10 0.35 0.80 9 · Wall Thickness: 3.34 2.23 9 5.41 7.29 .060" (0,2 cm) *Minimum burst pressure varies according to pipe and fitting size. 10 cm), 1.07" (2,71 cm) · Inner60 Dimensions:143/4" .824" (2,1 11 0.30 0.75 Wt. Foot: .074 lbs. (0,03 Kg) 10· specifications 2.76 10 6.02 8.85 * Measured in 100' lengths See for details. 0.753.71 · Wall Thickness: .060" (0,2 cm) 11 0.295 12 70 16 Seal 0.25 0.60 Maximum Pressure 11 non-constant 4.08 pressure 3.07valve-out outdoor * For 11 irrigation 6.62connections 10.60only. · Wt. Foot: .074 lbs. (0,03 Kg) 1” Blu-Lock™ 1” Insert Fitting Blu-Lock™ Barb Fitting 13 12 4.45 3.85 12 7.22 12.40 * Measured in 100' lengths 0.75 386
· · · · ·
• Loss (PSI)
Release Collar I.D. (Inside Diameter)
40
1" GPM 11
3/4" 0.50 GPM
I.D. (Inside Diameter)
0.45
80.40
1.00
0.43
85
I.D. (Inside Diameter)
1.10
0.90
1.06
40
feature50quick
60 • Hydro-Rain
DRIP IN® PC BROWN EMITTER LINE Pressure Compensating 0.5 and 1.0 GPH 12”and 18”Emitter Spacing 100’, 250’ & 500’ Coils
½", 1 GPH, 12" Drip In® PC Brown Dripline SPACING, AGRIFIM
With higher water costs in our future, it makes more sense than ever to use inline tubing in suitable landscape applications. Drip In PC is both an effective and economical choice for at-grade installations. This pressure compensating dripline delivers water precisely and evenly to plant root zones from beginning to end of the tubing run. Rugged, lightweight and flexible, Drip In PC is also highly clog resistant thanks to its labyrinth type, turbulent flow design. Manufactured of the highest quality resins and under strict quality control standards, this brown tubing will blend into the landscape and deliver years of reliable service.
UNIQUE, CONTINUOUS FLUSHING Three separate flushing cycles ensure ongoing reliability and performance of the pressure compensating Drip In emitter. Flushing occurs at low pressure at start up, With higher waterbegins coststoin our future, it makes more during the irrigation cycle if the emitter clog sense inthan use inline and there is a reduction flow, ever and asto pressure drops tubing in suitable landduring shut-down. scape applications. Drip In PC is both an effective
¼” EMITTER LINE Built-in Emitters
Deliver precise water application directly to the root zone.
Flushing
Regulating
UNIQUE, CONTINUOUS FLUSHING Three separate flushing cycles ensure ongoing reliability and performance of the pressure compensating Drip In emitter. Flushing occurs at low pressure at start up, during the irrigation cycle if the emitter begins to clog and there is a reduction in flow, and as pressure drops during shut-down.
Inlet
HIGHLY CLOG RESISTANT Unique, raised internal filtration design deflects debris upward and away from the emitter’s inlet. Because the inlet is also raised, sediment won’t collect at the inlet while the system is off.
Deliver precise water application directly to the root zone.
Fully Pressure-compensating From 15 – 60 PSI
Fully Pressure-compensating From 15 – 60 PSI
High Uniformity
High Uniformity
The pressure compensating design makes it ideal for slopes, high wind areas and areas with limited water supply or low pressure.
The pressure compensating design makes it ideal for slopes, high wind areas and areas with limited water supply or low pressure.
Proven, dependable pressure compensating Drip In emitters deliver uniform, precise emitter discharge rates with exceptionally low variability.
Proven, dependable pressure compensating Drip In emitters deliver uniform, precise emitter discharge rates with exceptionally low variability.
Keeps Water Off Hardscapes
Keeps Water Off Hardscapes
Preventing unsightly water stains.
Preventing unsightly water stains.
DUAL OPPOSED OUTLETS In above ground installations, dual opposing ports in every emitter assure that at least one outlet provides air relief, which prevents back-siphonage of contamination into the emitter.
130
100'
DURA-FLO™ JR Dripperline
and economical choice for at-grade installations. This pressure compensating dripline delivers water precisely and evenly to plant root zones from beginning to end of the tubing run. Rugged, lightweight and flexible, Drip In PC is also highly clog resistant thanks to its labyrinth type, turbulent flow design. ManuInlet factured of the highest quality resins and under strict quality control standards, this brown tubing will blend into the landscape and deliver years of reliable service.
HIGHLY CLOG RESISTANT Unique, raised internal filtration design deflects debris & Benefi ts upward and awayFeatures from the emitter’s inlet. Because the inlet is also raised, sediment won’t collect at the inlet while the system Built-in is off. Emitters
Features & Benefits
per ft.
¼", 0.5 GPH, 6" SPACING ROOT
. The DURA-FLO™ JR Dripperline The emitter is self-cleaning . comprises a drip emitter prewith built-in filter slits to mininserted into the 1/4" tubing at imize clogging. It is perma. either 6" or 12" intervals. nently bonded to the inside of SDL005-12-100 SDL005-12-100BR SDL005-12RG-100 SDL-6-RG100 Do not exceed the maximum the tubing during the extru. recommended length of run. sion process. Dual exit holes, SDL005-12-500 SDL005-12-500BR SDL005-12RG-500 180° apart, are standard. . MODELS MAXIMUM LENGTH OF RUN (FEET) . SLOPE BROWN BLACK SPACING . TUBE TUBE + 3% + 2% + 1% 0% - 1% - 2% - 3% SFJR-BR-06 SFJR-BL-06 6" 20 feet 20 feet 19 feet 19 feet 19 feet 18 feet 18 feet . SFJR-BR-12 SFJR-BL-12 12" 36 feet 35 feet 34 feet 33 feet 32 feet 31 feet 30 feet . positive (+) slope = downhill, negative (-) slope = uphill . Emitter is a ¼” dripline with a flow rate of ½gph/6” and The turbulent flow line path and ¼", 0.5 GPH, ¼", 0.5 GPH, Pressure 10 psi 15 psi 20 psi psi 30 psi unique inlet slit greatlythe same 1gph/12”. It has sturdy design as other 5Agrifim dripline . 6" SPACING 12" SPACING reduces the risk of clogging. Discharge of Emitter .39 gph .47 gph .56 gph .63 gph .69 gph products making it flexible and easy to install. DURA-FLO™ JR Dripperline . is ideal for use as a soaker hose in ground cover, small . shrubs, vegetable gardens or planter boxes. . Always use a filter For larger . and a pressure regulatrees, a loop can be made SDL-6 SDL-12 . tor when using pourous off the 1/2" hose SDL-6-100BL SDL-12-100BL tubing (A700). . Parallel lines of DURA-FLO™ JR are shown . watering a small vegetable garden. 1/4" connectors (C250) are used to connect the . DURA-FLO™ JR to the supply tubing. . . GP2 ¼" TUBING ¼" VINYL ¼" TUBING ¼" WHITE UV ¼" COLORED 1/8” TUBING . TUBING IN A BUCKET TUBING TUBING . The ends of the DURAFLO™ JR are closed off . with a Goof Plug (GP2). . 1/4" connectors (C250), 1/4" tees (T250) and 1/4" elbows . (EL250) can be used with the Regulating
500'
½", 1 GPH, 12" SPACING, ROOT
Pressure Compensating 0.5 and 1.0 GPH 12”and 18”Emitter Spacing 100’, 250’ & 500’ Coils Flushing
100'
DRIPPERLINE
½", 1 GPH, 12" SPACING, TORO
Drip In® PC Brown Dripline
DUAL OPPOSED OUTLETS In above ground installations, dual opposing ports in every emitter assure that at least one outlet provides air relief, which prevents back-siphonage of contamination into the emitter.
130
MICRO TUBING
DURA-FLO™ JR Dripperline.
50'
P250-50
100'
P250-100
P250V-100
P250UV-100
1000'
P250-1000
P250V-1000B xQ1000B
P250V-1000
36
2000’
P185 3/8" TUBING
½" POLY THIN WALL
50' BLACK
P455-50
50'
P500-50
100' BROWN
P455BR-250
100'
P500-100
500'
P500-500
1000'
P500-1000
86
The DURA-FLO™ JR can be attached to the MAXI-FLO™
bubbler. For recommended length of runs see page 20. P250-50xx
Loc-Eze® Fittings and Accessories
AQUA-TRAXX PREMIUM DRIP TAPE Loc-Eze® Fittings
Performance_Brochure_06
9/5/06
5:47 PM
Page 5
Loc-Eze® Fittings - Extra-large cross-sectional helps prevent clogging. andarea Accessories ® Fittings Loc-Eze - Advanced flow path design ensures accurate deliveryAqua-Traxx of water from every emitter. and Accessories Aqua-Traxx Aqua-Traxx PERFORMANCE CHARTS PERFORMANCE CHARTS PERFORMANCE CHARTS and Accessories 5/8" 5/8" 5/8" Performance_Brochure_06
9/5/06
5:47 PM
Page 15
®
®
8” Spacing
EA5XX1245
Max. 15 psi
12” Spacing
0% SLOPE
T-FTV16 T-FTT16
T-FTT16
T-FCC16
EU
6
8
10
12
14
EU EU
90
534
538
541
544
546
85 T-FTF16 80
673 784
678 682 T-FJA16 790 794
90 90 85 85 80 80
T-FEE16
EU
T-FCC16
685 688 T-FJJ16 798 801
T-FAM16
T-FAM16
T-FCC16
6
8
10
12
680 671 844 834 T-FJJ16 T-FJJ16969 978
662 824 959
EU EU
T-FTV16T-FTV16
T-FTF16 T-FTF16 T-FAS16-1
T-FTS16
2% DOWN
1
½"
AIR VACUUM RELIEF VAL.
AVRV50EU
2
¾"
FLUSH VALVE
FCH-H-FHT 85
3
6"
T-FAS16-1 WIRE CANE STAPLE T-FAS16-1
6
90
T-FTS16S8 T-FCH-H-FHT
T-FTS16
80
T-FTS16-1 T-PMR25-LF 3% DOWN
4
6"
WIRE U STAPLE 25 PACK
S8U-25
4
6"
WIRE U STAPLE 100 PACK
90 S8U-100
5
½"
T-FCH-H-FHT FIGURE 8 END CAP
T-FCH-H-FHT
FIG-8
T-PMR25-LF
T-PMR25-LF
CLAMPS
647 842 T-FTS16-1 975
EU
6
85 80
140 785 T-FJQ16 933
T-FJQ16
1% UP
T-FTS16-1
1
8
10
90 85 80
T-FEE16
3
10
617 672 837 860 T-CA-710 972 993
T-CA-710
8
10
90 85 80
260 375 455
309 431 515
345 470 557
2% UP Part 8 No.
12
6
6
4 10
T-FCH-H-FIPT T-CA-710 T-CEFCH-H 3% DOWN 3% DOWN T-FAS16-1 T-FTS16 14
EU EU
6
6
8
8
8
10
T-SS6-50 T-FTS16-1
5
10 10
8
10 10
8
T-CEFCH-H
1% UP 1% UP
12
T-FCH-H-FHT 14
3% DOW
14 14
T-YD-500-34 EU
EU EU
90 85 80
T-SS6-50
T-PMR25-LF 6
6
8
T-FJQ16
12 12
1% UP
14 14
T-CA-710
e c i f y i n g 275 I n f o r 335 m a t i o380 n — 415 394 S p 90 90 273 333 379 415 443443 0 . 7 1 0 85 O D C o m405 p r e s s476 i o n F527 itting s 522 85 405 475 527 565 565 595596
372 499 Part No.614 589
Description
80 497 573 575 629 629 670 671 703703 S p e c i f y i n g I n f o r80 m a t i o n —497 T-CA-710 OD Compression Adapter 1⁄2” Spigot 0 . 7 1 0 O DT-CEFCH-H C o m p rOD e sCompression s2% i oUP n F i t t i n g s Flush Valve, 0.8 GPM, 2 psi Sealing 2% UPAdapter with
S p e c i12 f y i n g 14IDescription n f oEUr mEUa t i o n — 10 6 6 1
®
8
12 12
693 702 90 90 136 136 191 192 759 760 809 809 832832 872 877 85 877 973 972 10141013 10371036 10491049 85 877 T-CEFCH-H T-SS6-50 1005 1010 80 80 10831083 11431144 11771177 11971197 12091209
8
8
10 10
T-CA-710 OD1Compression 7 0 inner O261 D Adapter C o288 m⁄ ” Spigot p r e90s s 90 i o n F i151 t t 152 i n gof s196the 90 192 197 239 The term “Stepless” refers to the absence of steps or149gaps on0 .229 the T-CEFCH-H OD Compression Adaptercircumference with FlushS Valve, p e0.8c GPM, i f y2ipsinSealing g In f o r m a238 tion No. S p e c i f y i n g 85 I n f o r m a234 t i o nPart — 293 340 378 409 Description 85 241 306 307 261 363 85 240 A cseal. cessories clamp. The ingenious Stepless® design compression and a 360° ⁄ ” Lprovides o c - E z80e F uniform i t t i298 n g s T-CA-710 365 417 459 Adapter 493 ⁄ ” Spigot 80 309 387 451 OD Compression 5
12 12
T-FJJ16 2% DOW 90 85 80
8
EU EU
T-IPS1500 T-FJA16
EU
T-YD-500-34 T-FJQ16
14
12 12
1% DOW 90 85 80
T-YD-500-34 T-FCH-H-FIPT T-FTV162% DOWN 2% DOWN T-FTF16
10 10
T-FCC16 EU
8
8
12 12
654 90 90 827 827 827 827 818 817 809 808 800800 T-DL-MP9 T-DL-MP9 814 85 85 10291029 10251025 10171016 10051005 995995 T-FAS1680 80 950 T-FAS16 11871187 11851184 11771177 11681168 11591159
6
6
10 10
686 698 699 697 90 90 702 703 803 803 831 831 841 841 843843 863 869 868 865 85 85 988 988 10261025 10431043 10471047 10481048 995T-YD-500-34 1001 1003 T-FCH-H-FIPT 1000 80 80 T-IPS1500 11511151 11851185 12011201 12071207 12091209 T-IPS1500
6
6
12
EU
649 653 652 655655 641 641 646 645 649 T-DL-MP9 807 807 814 813 818 817 822 821 826825 T-FAS16 941 941 948 948 953 953 958 957 961961
T-FTT16
8
0% SLOP 14 14
8
14 14
EU
EU
2
6
14 14
DL2000® SERIES PC EMITTER LINE 90 687 85 853 T-FJA16 80 T-FJA16 984
EA5XX12
INLET PRESSURE INLET PRESSURE 6
1% DOWN 1% DOWN
14
Emi
EA5XX0834 OF RUN IN FEET EA5XX1634LENGTH LENGTH OF RUN IN FEET .34 gpm PER PER 100 100 FEETFEET @ 8@psi8 psi .34 gpm T-FAM16 0% SLOPE 0% SLOPE
INLET PRESSURE
T-FEE16 1% DOWN
5/8"
Emitter Flow Rate 0.13 GPHGPH @@ 8 psi Emitter Flow Rate 0.27 8 psi
Emitter Flow Rate 0.27 GPH @ 8 psi
LENGTH OF RUN IN FEET 100 FEET @ 8 psi T-FTT16 .45 gpm PERT-FEE16
Aqua-T
®
2
12 12
14 14
EU
90 85 80 2% UP EU
275 276 307308 90 S p 408 409 447448 85. 7 1 0 0 544 501 503 544Part No. 80
386 449 S p e cPart i f y Number i n g I n Description f o80 r m a t i o n 309 T-CEFCH-H OD Compression Adapter with Flush Valve, 0.8 GPM, 2 psi Sealing A c c e s s oAir r iVent— e s 1⁄2” MIPT Air Release & Vacuum Relief Valve T-YD-500-34 T-CA-710 OD Co 3 Part Number Description T-FCH-H-FIPT Flush Valve— ⁄4” FPT (Pipe Thread), 0.8 GPM, 2 psi Sealing Pressure T-CEFCH-H OD Co Part Number Description T-FEE16 Loc-Eze Elbow 1 3 Valve T-YD-500-34 AirSVent— ⁄ 2 ” MIPT Air Release & Vacuum Relief p e cT-FCH-H-FHT i f y i n g I Flush n f oValve— r m a⁄4t” iFHT o n(Hose Thread), 0.8 GPM, 2 psi Sealing Pressure T-FTT16 3 S p e cT-FCC16 i Loc-Eze f y i nTee g Loc-Eze I n f o rCoupling mation— 3 ⁄4” FPT (Pipe Thread), Pressure T-FCH-H-FIPT Flush Valve— ⁄4”, 15 psi 1/10-8 GPM Low-flow Regulator— T-PMR15-LF A c c e s sPressure o r 0.8 i eGPM, s 2 psi Sealing T-FEE16 5 T-FAM16 Loc-Eze ElbowLoc-Eze x 1/2” MPT Male Adapter ® Pressure T-FCH-H-FHT Flush Valve—3⁄4” FHT (Hose Thread), 0.8 GPM, 2 psi Sealing 3 Sp L o c E z e F i t t i n g s ⁄4”, 25 psi 1/10-8 GPM Low-flow Pressure Regulator— T-PMR25-LF T-FCC16 ⁄8” Loc-Eze Coupling 3 T-FTV16 Loc-Eze x 1/2” Slip Adapter Tee GPM Low-fl owI3n f o r m a t i o n — Pressure Regulator— ⁄4”, 15Spsip1/10-8 T-PMR15-LF e c i f y i n g Part Number Description T-FAM16 Loc-Eze x 1/2” MPT Male Adapter Regulator— T-PMR25-MF 3 Part Number Description ⁄4”, 25 psiPressure 1/10-8 GPM Low-flow ⁄4”,®25 psi 2–20 GPM Medium-flow Pressure Regulator— T-PMR25-LF x 1/2” 5 Loc-Eze x 1/2”Loc-Eze Slip Adapter Tee FPT Tee T-FTV16 T-FTF16 3e T-YD-500-34 Air Vent—1T-PMR40-MF ⁄2” MIPT 3Air Release & Vacuum Relief Valve ⁄ 8 ” L o c E z F i t t i n g s ⁄4”, 40 psi 2–20 GPM Medium-flow Regulator— ⁄4”, 25 psiPressure 2–20 GPM Medium-flow T-PMR25-MF Pressure Regulator— Loc-EzeT-FJA16 Tee T-FTT16 T-FTF16 Loc-Eze x 1/2”Loc-Eze FPT Tee x 3/4” MHT Male Adapter Part Number Descr 3 ⁄4” FPT3⁄4”, (Pipe Thread), 0.8 GPM, 2 psi T-FCH-H-FIPT Valve— ”Description x 1”, Pressure 25 psi, 10–32 GPM High-flow Regulator—1 T-PR25-HF 2–20 GPM Medium-fl ow1⁄4Sealing Pressure Regulator— T-PMR40-MF Flush Part Number40 psiPressure x 3/4” MHT with Cap T-FJA16 Loc-Eze x 3/4”Loc-Eze MHT Male Adapter T-FEE16 Loc-EzeT-FJJ16 Elbow 3 T-YD-500-34 Air Ve ⁄4” FHT1⁄4(Hose Thread), 0.8 GPM, 2 psi ow Sealing Pressure Flush Valve— T-FCH-H-FHT ” x 1”,DL2000 25 psi, 10–32 GPMOperation High-fl Pressure Regulator—1 T-PR25-HF Loc-Eze x 3/4”Loc MHT with Cap FHT Hose Swivel with Screen Pop-up Indicator T-DL-MP9 Eze x 3/4” T-FCC16 T-FJJ16 Loc-EzeT-FAS16 Coupling Loc-Eze Tee T-FTT16 3 T-FCH-H-FIPT Flush ⁄4”, 15 psi 1/10-8 GPM Low-flow Pressure Regulator— DL2000 Pop-up Operation Indicator T-DL-MP9 x 3/4” FHTAdapter Hose SwivelFHT with Hose ScreenSwivel with Washer T-PMR15-LF 5/8” (16mm) T-FJQ16 Loc-EzeT-FAS16-1 x Loc 1/2”Eze MPT Male T-FAM16 T-FAS16 Loc Eze x 3/4” T-FEE16 Loc-Eze Elbow Figure-eight End Clamp 3 5/8” (16mm) Figure-eight Endpsi Clamp T-FJQ16 T-FCH-H-FHT Flush ⁄4”, 25 1/10-8 GPM Low-flow Pressure Regulator— x 3/4” FHT Hose Swivel with Washer T-FTV16 T-FAS16-1 Loc-EzeT-FTS16 x Loc 1/2”Eze Slip Adapter Teex 3/4” FHT Swivel Tee with Screen T-PMR25-LF Loc-Eze 3/4” (20mm) Steel Soil Staple to Hold Tubing in Place T-SS6-50 3 Loc-Eze T-FCC16 Coupling T-FTS16 Loc-Eze x 3/4” FHT Swivel Tee with Screen 3/4” (20mm) Steel Soil⁄4Staple to Hold Tubing inMedium-fl Place T-SS6-50 Pressu T-PMR15-LF ”, 25 psi 2–20 GPM ow Pressure Regulator— T-PMR25-MF T-FTF16 Loc-Eze x Loc-Eze 1/2” FPT Tee FHT Swivel x 3/4” FHTWasher Swivel Tee with Washer T-FAM16 Loc-Eze xHold 1/2”Tubing MPT Male Adapter 5/8”to(16mm) Plastic Locator Stake to Hold Tubing in Place T-IPS1500 T-FTS16-1 T-FTS16-1 x 3/4”Loc-Eze Tee with 3 5/8” (16mm) Plastic Locator Stake in Place T-IPS1500 Pressu T-PMR25-LF ⁄ 4”, 40 psi 2–20 GPM Medium-flow Pressure Regulator— T-PMR40-MF T-FJA16 Loc-Eze x 3/4” MHT Male Adapter T-FTV16 1 Loc-Eze x 1/2” Slip Adapter Tee 5 Note: ⁄ 8” EHW1645 is antoequivalent hoseT-PR25-HF size to DL2000 Dripline. Note: 5⁄8” EHW1645 is an equivalent hose size DL2000 Dripline. T-PMR25-MF Pressu ⁄4” Loc-Eze x 1”, 25xpsi, 10–32 GPM High-flow Pressure Regulator—1 T-FJJ16 Loc-Eze x 3/4” MHT with Cap T-FTF16 1/2” FPT Tee T-PMR40-MF Pressu DL2000 Pop-up Operation Indicator T-DL-MP9 T-FAS16 Loc Eze x 3/4” FHT Hose Swivel with Screen T-FJA16 Loc-Eze x 3/4” MHT Male Adapter Pressu T-PR25-HF 5/8” (16mm) Figure-eight End Clamp T-FJQ16 T-FAS16-1 Loc Eze x 3/4” FHT Hose Swivel with Washer T-FJJ16 Loc-Eze x 3/4” MHT with Cap T-FTS16 128Loc-Eze x 3/4” FHT Swivel Tee with Screen DL20 T-DL-MP9 3/4” (20mm) Steel Soil Staple to xHold in Place T-SS6-50 T-FAS16 Loc Eze 3/4”Tubing FHT Hose Swivel with Screen 128 T-FTS16-1 Loc-Eze x 3/4” FHT Swivel Tee with Washer 5/8” ( T-FJQ16 5/8” (16mm) Plastic Locator Stake to Hold Tubing Placewith Washer T-IPS1500 T-FAS16-1 Loc Eze x 3/4” FHT Hose in Swivel T-FTS16 Loc-Eze x 3/4” FHT Swivel Tee with Screen 3/4” ( T-SS6-50 Note: 5⁄8” EHW1645 is an equivalent hose size to DL2000 Dripline. Loc-Eze x 3/4” FHT Swivel Tee with Washer T-FTS16-1 5/8” ( T-IPS1500
STEPLESS CLAMP
pecifying PartSNumber
I n f o r m a t i o nDescription — 5 c - E zTee e® Fittings T-FTT16⁄8” L oLoc-Eze
GEAR CLAMP
PLASTIC RACHET CLAMP
¼"
OC-7.0-505R
HAS4
PL-CLAMP250
½"
OC-21.0-706R
HAS6
PL-CLAMP
¾
OC-27.1-706R
1"
1
STANDARD CLAMP
2
THIN WALL CLAMP
CRIMPER
OC-210R
OC-198R
HAS12
OC-271R
OC-256R
OC-34.6-706R
HAS16
OC-346R
OC-331R Note: ⁄ ” EHW1645 is an equivalent hose size to DL2000 Dripline.
1-¼"
OC-45.5-706R
HAS16
1-½"
OC-50.0-706R
HAS24
128
2"
5
8
128
HAS32
The best clamp for pressurized lines • 5/16” 410 Stainless Steel Slotted Hex Head Screw • 200/300 Series Stainless Steel Band and Housing • ½” Wide Band UV stabilized materials for long life.
87
TOOLS 1. 2. 3. 4. 5. 6. 7. 8.
ELECTRICAL DIAGNOSTIC PIPE CUTTER MISC. TOOLS SHOVELS ETC PVC GLUE PVC PRIMER LANDSCAPE CLOTH SEALERS, TAPE & ACCESSORIES
ELECTRICAL DIAGNOSTIC EQUIPMENT 1
PRO48K
TECH TEST KIT
2
PRO800D
WIRE LOCATOR KIT
2
WIRE-R
WIRE LOCATOR KIT RENTAL
3
PRO90
AUTOMATIC MULTIMETER
4
VD6 505
ADJ. VOLT SENSOR
• Tech Tracker Wire and Valve Locator tool.
2
1
• CHATTER Solenoids • Check Solenoid Continuity • ID Wire with Tone/Probe
3
RENTAL AVAILABLE
4 • Hi-Impact Resistant ABS housing • Adjustable Non-Contact sensitivity • 360° visual and beeping audio Non-Contact Voltage Detection
88
•No Fuses to Blow • Automatic Powerdown • Fullt Automatic and Hassle Free Multimeter
PIPE CUTTER 1
KWIK CUT UP TO 1-¼"
T135SS
2
1-¼"REPLACE. BLADE
BT135SS
3
KWIK CUT UP TO 2"
SS200SS
4
2" REPLACEMENT BLADE
SSB200SS
5
1" PIPE CUTTER METAL
PTC-1
6
1" REPLACEMENT BLADE
PTC1-RB
7
1-¼"PIPE CUTTER METAL
R-125
8
1-¼"REPLACEMENT BLADE
R125-RB
9
½" TO 2" PIPE CUTTING TOOL
PVC2
10
MICRO TUBE CUTTER
M-CUTTER
11
1-½” PIPE CUTTER
SB5000
12
QUICK RELEASE BLADE
BL5001
9
10
2
1
5
6
NEW
11
3
4
7
8
12
Quick release blade replacement
MISC. TOOLS & ACCESSORIES 1
JOINT PLIERS 10”/12”/16”
GJP-100/120/160
2
WIRE STRIPPER
WSTRIPPER
3
36" CABLE SAW
CS4600
4
HIGH TENSION HACKSAW
HACKSAW
5
12" PVC HANDY SAW
PVCSAW
6
CLOSE QUARTER HACKSAW
ECO-HACKSAW
7
½" NIPPLE ExTRACT
26073
8
MARKING FLAGS
FLAG
9
HOSE FAUCET LOCK
HB-LOCK
10
4 WAY HOSE BIB KEY
4WKEY
11
MINI PUMP W /50’ HOSE
HPUMP-JR
12
SIPHON KING
HPUMP
13
TORO FLOW GAUGE
995-01
14
TORO PRESSURE KIT
995-51
15
PLASTIC HAMMER
DBH15
16
28" METER VALVE KEY
V-KEY
16
5' METER VALVE KEY
V-KEY5
16
30" GATE VALVE KEY
SK30
16
54" GATE VALVE KEY
SK54
17
TUNNEL KIT
WTK
1
2
3
6
5
9
13
4
7
10
8
11
12
Catalog #
Size
Selling Unit
48024
24” x 36” Hose
12 per box
48036
36” x 36” Hose
12 per box
48072
36” x 72” Hose
12 per box
48172
60” x 72” Hose
12 per box
14 15
16
17
89
18
12’ MARKING WAND
K07095
19
34’ MARKING WAND
K07096
20
VARIOUS PAINT COLOURS
MPAINTxx
21
WIRE STRIPPER
WSTRIPPER
22
SPRINKLER PULL UP TOOL
SHTOOL
18
19
21
22
20
SHOVELS ETC Owens-Corning’s glass fiber reinforcement, is used exclusively in all Structron handles. This state-of-the-art technology produces a handle that is up to 100% stronger than other fiberglass handles.
1
SHOVEL ROUND POINT
S700
2
ROUND POINT/D-HANDLE
S700D
3
SHOVEL SQUARE POINT
S701
4
SQUARE POINT/D-HANDLE
S701D
5
5" TRENCHING SHOVEL
S702
6
4" TRENCHING SHOVEL
S703
7
5-½" DRAIN SPADE
S704
8
DRAIN SPADE/ D-HANDLE
S704D
9
GARDEN SPADE
S705
10
GARDEN SPADE/ D-HANDLE
S705D
11
4" CLEAN OUT SHOVEL
S709
12
BOW RAKE 16 TINE
BR16
13
LEVEL HEAD RAKE 16 TINE
LH16
14
48" WIRE PLACER
LLT
15
ROUGH SURFACES BROOM
PB24R
16
PICK MATTOCK
PM5
17
SLEDGE HAMMER
SH8
18
¾" SPRINKLER HEAD TRIMMER
SHT2
19
½" SPRINKLER HEAD TRIMMER
SHT3
20
METAL LEAF RAKE
SR22
21
8" TAMPER
TP8
21
90
1&2
3&4
5&6
7&8
9&10
11
12
13
14
15
16
17
18&19
20
PVC GLUE REGULAR CLEAR CEMENT
HEAVY DUTY GREY CEMENT
RAIN-R-SHINE® CEMENT
¼ PINT
CC-012
¼ PINT
CH-012
¼ PINT
CG-012
½ PINT
CC-025
½ PINT
CH-025
½ PINT
CG-025
1 PINT
CC-050
1 PINT
CH-050
1 PINT
CG-050
1 QUART
CC-100
1 QUART
CH-100
1 QUART
CG-100
1 GALLON CC-400
1 GALLON CH-400
Regular-Bodied Clear cement for use on all schedules and classes of PVC pipe and fittings up to 4” for Sch. 40 and up to 2” for Sch. 80. Recommended application temperature 40°F to 110°F / 4°C to 43°C. This Applies To All Glue
1 GALLON CG-400 Medium-bodied grey cement for use on all schedules and classes of PVC pipe and fittings up to 6” diameter with interference fit. Very fast-setting “Hot” cement formulated for wet conditions and/or quick pressurization and fast installation.
Heavy Duty grey cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure. Thick formula fills gaps in large diameter pipe and loose fitting joints.
PVC PRIMER PURPLE PRIMER
CLEAR PRIMER
Purple-tinted aggressive primer for use on PVC and CPVC pipe and fittings. For use in areas where plumbing code calls for verification that a primer has been used.
¼ PINT
PP-012
¼ PINT
CP-012
½ PINT
PP-025
½ PINT
CP-025
1 PINT
PP-050
1 PINT
CP-050
1 QUART
PP-100
1 QUART
CP-100
1 GALLON
PP-400
1 GALLON
-
A clear aggressive primer for use on PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
91
LANDSCAPE CLOTH & ACCESSORIES FPP1V 03050
3’ x 50’ 4OZ WOVEN CLOTH
FPP1V 03100
3’ x 100’ 4OZ WOVEN CLOTH
FPP1V0400
4’ x 100’ 4OZ WOVEN CLOTH
FPPV04250
4’ X 250’ 4OZ WOVEN CLOTH
DF3100
3’ x 100’ DRAINAGE FABRIC
PU6100
6’ x 100’ POND UNDERLAY
FRONT AND BACK
SRW Pro Plus is a double-sided or “capped” geotextile made of both woven and non-woven polypropylene fabrics, needle-punched together with plant lines every 12 inches for easy plant alignment. For best weed control, install this fabric fuzzy side facing the ground
FRONT AND BACK
GFS50
6" FABRIC STAPLES 50 PACK
SEALERS, TAPES & ACCESSORIES EPOXY PUTTY
PUTTY4
½” DAUBER
DAUB-005
¾” DAUBER
DAUB-007
1 OZ TUBE LIQUID TEFLON
LT-010
4 OZ CAN LIQUID TEFLON
LT-040
MEGA TAPE
M-TAPE
½" TEFLON TAPE
T-TAPE
¾" TEFLON TAPE
T-TAPE-007
92
Convenient multi-purpose sealing, patching and mending compound. Withstands up to 10,000 PSI on liquids from -50° to +500°F.
VALVE BOXES NDS PRO SERIES VALVE BOXES 6" ROUND
ECONO
10" ROUND
A-1006E
GREEN BLACK
A-1006BK Purple reclaimed water boxes available
14" x 19" SQUARE
ECONO
A-1010E
ECONO
A-1210E
GREEN
A-1010
GREEN
A-1210
BLACK
A-1010BK
BLACK
A-1210BK Purple reclaimed water boxes available
21" x 30" SQUARE
18" x 24" SQUARE
24" x 38" SQUARE
ECONO
A-1240E
ECONO
GREEN
A-1240
GREEN
A-1250
GREEN
A-1260
BLACK
A-1250BK
BLACK
A-1260BK
14" x 19"
EXTENTION
A-1225
PLATFORM
A-1210PL
ECONO
Purple reclaimed water boxes available
18" x 24"
A-1240-6
RAINBIRD VALVE BOXES 10" ROUND
ECONO
A-1010ERB
14" x 19" SQUARE
ECONO
A-1210ERB
93
AGRICULTURE MINI HOSE REELS
Cadman Irrigation Travellers - 1000 Series 1.1” x 250’
TR-ASY-1100
1.25 x 230’
TR-ASY-1250
1.5” x 350’
TR-ASY-1500
1.8” x 400’
TR-ASY-1500
2.0” x 250’
TR-ASY-2000S
Cadman Mini Irrigation Travellers allow for precision and accuracy for small-medium scale agriculture and rectreational applications such as golf courses, baseball fields, and riding rings. This computer controlled , speed compensating traveller does all the work. The user only needs to pull out the hose, tell the computer what retrieve rate to use, engage the clutch, and walk away.
WATER TANKS International Gallons/US Gallons 44519 1000 IG/1200 USG Black Water Tank 44517 500 IG/600 USG Black Water Tank
94
TRI-POD ASSEMBLIES
TRI-012 Tripod assembly 1000F
1 1/4” Sprinkler Stand, Male Threaded 1 1/4” Steel Tripod W/ Impact and Cam-Lock Fitting Wheeled Sprinkler Cart - 1” w/Slime Funny Sprinkler
PRO-LOCK FITTINGS 5/8” Tape x 3/4” Female Hose Swivel Adapter
T 5/8” Tape x 3/4” MPT Male Adapter
5/8” Tape x 250 Barb Adapter Shutoff Valve
5/8” Tape x 250 Series Barb Adapter
5/8” Tape Shutoff Valve
5/8” Tape Tee
5/8” Tape Coupling
SPIN-FHT
SPIN-MPT
SPIN-V250
SPIN-250
SPIN-V
SPIN-T
SPIN-C
AQUA-TRAXX PREMIUM DRIP TAPE 8" SPACING 10mm
12" SPACING 10mm
per FT.
AQUATRAX-8
AQUATRAX-12
2,000’
AQUATRAX-8-2000
AQUATRAX-12-2000
7,500’
AQUATRAX-8-7500
AQUATRAX-12-7500
AQUA-TRAXX DRIP TAPE
95
WES-TECH irrigation.ca
625 Alpha Street Victoria, BC V8Z 1B5
shop.irrigation.ca 250-361-1573 orders@irrigation.ca
893 Van Isle Way Langford, BC V9B 5R8