INTERNSHIP PORTFOLIO_VANSHIKA TYAGI_2021 by Vanshikatyagi77

INTERNSHIP PORTFOLIO

VANSHIKA TYAGI

About the firm

FIRKI studio is an interior architecture firm based in Noida and it provide innovative solutions in a range of services including graphics, furniture, interior, architecture and landscape design. The studio is an open platform for cultivating a design centric work culture.

Simple interventions with a large impact is what the firm look forward to deliver in a project. They rely a lot on intuitive design and try to construct a collage of forms and spaces that is dynamic, aspiring and meaningful throughout. The studio tends to draw inspiration from simplistic observations and day-to-day objects/events, every project is a result of complex collaborative processes.

Started as an Illustration studio called ‘Firki ‘in 2011, the firm Firki Studio was founded in 2014 by Vasanth and Sakshi to delve into the field of design and architecture and was later joined by Shiv as Design Head and Partner. A young team of thinkers, focusing to create designs and memories that are everlasting.

The team :

Vasanth Packirisamy - Principal Architect

Sakshi Kumar - Landscape Designer

Shiv Pratap - Design Head

Nikhil Dwivedi - Junior Architect

Bharat Arora - Junior Architect

Vindhya Bhatia - Intern

Vanshika Tyagi - Intern

Bluone - Office Corporate

- Good for construction drawings

- Basement toilet drawing set

- Ground floor toilet drawing set

- Flooring drawing

- Reception area drawing set

- Reception furnitures

- Wall cladding detail

- Step seating detail

- Typical floor toilet drawings set

- Typical floor pantry drawing set

- Locker room drawing set

- Third floor metal racks

- Fourth floor layout, flooring, furniture tagging and sections

- Fourth floor partition and door detail

- 3D model & V ray views rendering

- BOQ of toilet pantry and locker room for all the floor

- Material selection

Aanand vilas - Mr. Seth’s residence

Residential Tagore park - Mr. Amitabh’s residence

- Measured drawing

- 3D model &V ray views rendering

- Kitchen layout and drawings

- Conceptual presentation and mood boards

- Furniture drawings

- Master bedroom and son’s room beds

- Master bedroom study table

- Pool area TV console

- Shoe rack

- Guest room study table

- Wardrobes of all rooms

- Electrical layout

- Toilet drawings

- BOQ of the project

- Material and loose furniture selection

- Lighting selection

Residential

- Flooring drawing all floors

- 3D model

- Kitchen layout and drawings

- Furniture drawings

- Wardrobes of all rooms

- Good for construction

- Toilet drawings all floors

- Sections

- Staircase drawings

- Folded elevations of all rooms

- Material selection

- Lighting selection

More scope of work

- Bhatinda residential project layout

- Coordinating with the vendors for materials.

- Coordinating drawings on the site with the contractor

- Site visits

- Preparing presentations

- Meeting with the clients

The project was an office situated in Noida, it was an eight story building each floor had different functionality. it was a large scale project but even the smallest detail was made in order to make the work easy to read on site. The space had a sense of minimalist design representing and enhancing the brand value. The materials also helped to enhance the rawness of the space.

1. The drawing is the property of the architect and is not to be

reproduce without prior

2. All dimensions are in Millimeters.

3. All measurements are taken from the floor finish.

4. Dimensions are to be read and not to be scaled.

5. All dimensions on site should be verified before commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work.

6. All drawings are to be read in conjunction with the drawings of other consultants.

7. Do not execute without cross checking with the architects.

CARPET AREA: 2820 SQFT

Learning outcome - Good for construction drawings are one of the major aspects of the design process and execution on site. The more detailed the drawing is the easier it is for the other people on site to execute the same. Visiting ongoing site opens your eyes to so many problems and solutions which you don’t realize sometimes while designing or making drawings.

Learning outcome - I was involved in different parts of the projects including making GFC drawings for ground floor reception area set and furnitures, details of the wall cladding, pantry set, locker room set and toilets of different floors which included layout to the smallest detail of edges of the wall and vanity.

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

16 11 03 01 02 D 03 01 02 04 05 06 07 08 09 10 14 15 13 12 16 17 17 17 18 19 20 21 NOTE & REFERENCE

Notes:

copied

permission.

General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUONE 1:100 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828, 01202450293 NIKHIL 2021-02-11 FOR APPROVAL No. Revisions Description Dated Sign Drg.: LAYOUT CAFETERIA FLOOR PLAN BO/INT/0.100

Bluone

Corporate

- Office

2070 75 105 1825 105 75 2430 105 75 485 1690 75 2430 COMMERCIAL BOARD 19 MM THICK FIXED ON THE 50X50 MM MS BOX, FINISHED IN PAINT PLYWOOD MM THICK FIXED AT THE BOTTOM WITH SCREW, FINISHED IN PAINT PLAN FIXED SEATING A AT 1000 MM HT 6 50 19 75 SEATING FRAME MADE IN COMMERCIAL BOARD 19 MM THICK FIXED ON THE 50X50 MM MS BOX, FINISHED IN PAINT ELEVATION A SECTION 1 BACK REST MADE IN COMMERCIAL BOARD 19 MM THICK FIXED ON THE WALL UPHOLSTERY 75 MM THICK AS PER SELECTION UPHOLSTERY 75 MM THICK AS PER SELECTION UPHOLSTERY 75 MM THICK AS PER SELECTION COMMERCIAL BOARD 19 MM THICK FIXED ON THE THE WALL METAL FRAME PLAN 1800 805 2370 420 840 840 50 50 70 50 A 02 02 SECTION 275 675 UPHOLSTERY 75 MM THICK AS PER SELECTION COMMERCIAL BOARD 19 MM THICK FIXED ON THE 50X50 MM MS BOX, FINISHED IN PAINT FRAME STRUCTURE MADE IN MS BOX SECTION 50X50 MM SUPPORTING THE SEATING 6 50 DETAIL AT A DETAIL AT B 2430 DETAIL AT A 700 905 950 UPHOLSTERY 75 MM THICK AS PER SELECTION FRAME STRUCTURE MADE IN MS BOX SECTION 50X50 MM SUPPORTING THE SEATING MS SECTION SCREWED TO THE WALL AND 19 MM MS THICK COMMERCIAL BOARD DETAIL AT A PLYWOOD 6MM AT THE BOTTOM FIXED WITH SCREW, FINISH IN AUTOMOTIVE PAINT COMMERCIAL BOARD 19 MM THICK FIXED TO THE METAL FRAME STRUCTURE, FINISHED IN PAINT AS PER SELECTION DETAIL AT B COMMERCIAL BOARD 19 MM THICK FIXED TO THE METAL FRAME STRUCTURE, FINISHED IN PAINT AS PER SELECTION UPHOLSTERY 75 MM THICK AS PER SELECTION FRAME STRUCTURE MADE IN MS BOX SECTION 50X50 MM SUPPORTING THE SEATING PLYWOOD 6MM AT THE BOTTOM FIXED WITH SCREW, FINISH IN AUTOMOTIVE PAINT NOTE & REFERENCE Notes The drawing is the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are Millimeters. All measurements are taken from the floor finish. 4. Dimensions are to be read and not be scaled. All dimensions on site should be verified before commencing any work and in case any discrepancy noticed, the same shall be brought the notice of the architect and shall be clarified before execution work. All drawings are to be read in conjunction with the drawings other consultants. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:20 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-02-10 FOR APPROVAL No. Revisions Description Dated Sign Drg.: GROUND FLOOR Drg. Title: BO/INT/0.740 RECEPTION FIXED SEATING

BOQ

BOQ for toilet wing. Selection of materials and coordination with contractor and other people on the site.

and toilets of different floors which included layout to the smallest detail of edges of the wall and vanity. BOQ for toilet wing. Selection of materials and coordination with contractor

other people on the site.

Bluone - Office

Corporate Corporate 1805 C B 215 BO/INT/0.722 02 BO/INT/0.722 02 BO/INT/0.72203 BO/INT/0.72203 200 215 195 195 205 215 215 215 1750 VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD, FINISHED IN MELAMINE POLISH STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD VENEER MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD, FINISHED IN MELAMINE POLISH STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD, FINISHED IN MELAMINE POLISH VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD, FINISHED IN MELAMINE POLISH 630 600 1150 600 1750 2350 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 1750 STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD PLYWOOD 12 MM THICK FIXED OVER COMMERCIAL BOARD 19 MM THICK VENEER MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD, FINISHED IN MELAMINE POLISH STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD, FINISHED IN MELAMINE POLISH STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD FINISHED IN MELAMINE POLISH ELEVATION A COMMERCIAL BOARD 19 MM THICK CUT IN THE PROFILE OF THE FEATURE AND FIXED AT THE BACK TO GIVE SUPPORT PLAN RECEPTION FEATURE VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD DETAIL AT A X X X Y X Y X Y X ELEVATION ELEVATION C X X X X X Y X Y X PLYWOOD 12 MM THICK FIXED OVER COMMERCIAL BOARD 19 MM THICK VENEER MM THICK FIXED OVER 12 MM THICK PLYWOOD FINISHED IN MELAMINE POLISH PLYWOOD 12 MM THICK FIXED OVER COMMERCIAL BOARD 19 MM THICK 385 195 165 1940 820 955 25 90 25 25 90 25 2080 NOTE & REFERENCE Notes The drawing is the property of the architect and is not be copied reproduce without prior permission. All dimensions are in Millimeters. All measurements are taken from the floor finish. Dimensions are to be read and not be scaled. All dimensions on site should be verified before commencing any work and case any discrepancy noticed, the same shall be brought the notice of the architect and shall be clarified before execution work. All drawings are to be read conjunction with the drawings other consultants. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:20 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-02-10 FOR APPROVAL No. Revisions Description Dated Sign Drg.: GROUND FLOOR Drg. Title: BO/INT/0.720 RECEPTION FEATURE

Bluone - Office

550 970 55 725 1600 2080 995 550 ELEVATION SECTION 2 DRAWER 15 2080 1600 SECTION 3 20 SOLID WOOD AS PER SELECTION ON THE EXPOSED EDGES DESK TOP IS FINISHED WITH MM THICK VENEER AS PER SELECTION SHUTTER MADE IN 18 MM THICK PLYWOOD FINISHED IN MM THICK VENEER COMMERCIAL BOARD THICK 19 MM THICK FINISHED IN 1MM THICK LAMINATE AS PER SELECTION DRAWER MADE IN 12MM THICK PLYWOOD FINISHED IN 1MM THICK LAMINATE AS PER SELECTION DETAIL AT A DETAIL AT B DRAWER 695 725 620 METAL FEATURE MADE IN MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION TABLE TOP IN STONE 16 MM THICK FIXED OVER COMMERCIAL BOARD DESK TABLE TOP IN VENEER 4 MM THICK FIXED OVER COMMERCIAL BOARD MS BOX SECTION 50X50 MM FINISHED IN PAINT AS PER SELECTION TABLE FASCIA IN STONE 16 MM THICK FIXED OVER COMMERCIAL BOARD METAL FEATURE MADE IN 1MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION TABLE TOP IN STONE 16 MM THICK FIXED OVER COMMERCIAL BOARD 40 MM RECESSED HANDLE FOR THE SHUTTER AND DRAWER MS BOX SECTION 50X50 MM FINISHED IN PAINT AS PER SELECTION SOLID WOOD AS PER SELECTION ON THE EXPOSED EDGES SKIRTING MADE IN 18 MM THICK PLYWOOD FINISHED IN 4 MM THICK VENEER METAL FEATURE MADE IN MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION TABLE TOP IN STONE 16 MM THICK FIXED OVER COMMERCIAL BOARD MS BOX SECTION 50X50 MM FINISHED IN PAINT AS PER SELECTION TABLE FASCIA IN STONE 16 MM THICK FIXED OVER COMMERCIAL BOARD DESK TOP IS FINISHED WITH MM THICK VENEER AS PER SELECTION FASCIA FINISHED WITH MM THICK VENEER AS PER SELECTION DRAWER MADE IN 12MM THICK PLYWOOD FINISHED IN 1MM THICK LAMINATE AS PER SELECTION COMMERCIAL BOARD 19 MM THICK FINISHED IN 1MM THICK LAMINATE AS PER SELECTION PLAN AT 600 MM HT 16 90 16 155 150 150 150 150 150 150 150 150 150 150 16 90 16 125 1835 125 15 20 150 50 240 240 55 185 30 970 25 550 25 2080 1600 155 50 275 25 40 MM RECESSED HANDLE FOR DRAWER AND SHUTTER MS BOX SECTION 50X50 MM FINISHED IN PAINT AS PER SELECTION DESK FASCIA FINISHED WITH MM THICK VENEER AS PER SELECTION BO/INT/0.711 03 BO/INT/0.711 03 SHUTTER MADE IN 18 MM THICK PLYWOOD FINISHED IN 4 MM THICK VENEER TABLE FASCIA IN STONE 16 MM THICK FIXED OVER COMMERCIAL BOARD MS BOX SECTION 25X25 MM SUPPORTING THE METAL FEATURE SOLID WOOD AS PER SELECTION ON THE EXPOSED EDGES 550 55 40 20 25 15 600 1000 50 2200 725 425 MS BOX 100X90 MM FOR WIRE MANAGER SWITCH PLATE 110 110 150 150 110 150 150 110 ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT DETAIL AT D DETAIL AT NOTE & REFERENCE Notes The drawing is the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are Millimeters. All measurements are taken from the floor finish. 4. Dimensions are to be read and not be scaled. All dimensions on site should be verified before commencing any work and in case any discrepancy noticed, the same shall be brought the notice of the architect and shall be clarified before execution work. All drawings are to be read in conjunction with the drawings other consultants. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:20 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-02-10 FOR APPROVAL No. Revisions Description Dated Sign Drg.: GROUND FLOOR Drg. Title: BO/INT/0.711 RECEPTION TABLE

set

and

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

Different stages of work done on site

Bluone - Office

Corporate PLAN RECEPTION METAL FEATURE ELEVATION B SECTION 2 01 02 02 50 1600 350 350 2300 1575 275 275 75 50 50 75 350 1600 350 2300 1610 1575 275 275 350 1600 350 ELEVATION A SECTION 1 A B 100 25 1300 25 100 50 1625 50 1625 100 25 1350 25 100 METAL BOX SECTION 25X25 MM SUPPORTING THE METAL FEATURE METAL BOX SECTION 25X25 MM SUPPORTING THE METAL FEATURE METAL BOX SECTION 25X25 MM SUPPORTING THE METAL FEATURE METAL FEATURE MADE IN MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION TRACK LIGHT AS PER SELECTION METAL FEATURE MADE IN MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION TRACK LIGHT AS PER SELECTION METAL BOX SECTION 25X25 MM SUPPORTING THE METAL FEATURE METAL FEATURE MADE IN 1 MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION TABLE METAL FEATURE MADE IN MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION 50 METAL BOX SECTION 25X25 MM SUPPORTING THE METAL FEATURE ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT METAL FEATURE MADE IN MM THICK METAL SHEET FINISHED IN PAINT AS PER SELECTION ELECTRICAL WIRES DRAWN FROM THE FLOOR JUNCTION BOX THROUGH 25X25 MM MS BOX SECTION FOR THE METAL FEATURE LIGHT DETAIL AT D DETAIL AT SOLID WOOD AS PER SELECTION ON THE EXPOSED EDGES FINISHED IN POLISH WITH ADHESIVE 40 20 16 19 VENEER MM THICK AS PER SELECTION FINISHED IN MELAMINE POLISH 16 MM THICK STONE AS PER SELECTION PASTED ON BOARD WITH ARALDITE DETAIL AT A 12 COMMERCIAL BOARD 19 MM THICK 20 19 20 DETAIL AT B SOLID WOOD AS PER SELECTION ON THE EXPOSED EDGES FINISHED IN POLISH WITH ADHESIVE VENEER 4 MM THICK AS PER SELECTION FINISHED IN MELAMINE POLISH COMMERCIAL BOARD 19 MM THICK 19 10 10 10 COMMERCIAL BOARD 19 MM THICK VENEER 4 MM THICK AS PER SELECTION FINISHED IN MELAMINE POLISH 305 15° 150 150 15° COMMERCIAL BOARD 19 MM THICK CUT IN THE PROFILE OF THE STONES AND FIXED AT THE BACK TO GIVE SUPPORT 155 155 COMMERCIAL BOARD 19 MM THICK VENEER MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD, FINISHED IN MELAMINE POLISH STONE FASCIA 16 MM THICK FIXED OVER 19 MM THICK COMMERCIAL BOARD DETAIL AT MM GROOVE 50 100 25 50 75 50 50 PROFILE MADE BY BENDING MM THICK MS SHEET FINISHED IN PAINT AS PER SELECTION MS SHEET 1MM THICK FINISHED IN PAINT AS PER SELECTION TRACK LIGHT DETAIL AT D NOTE & REFERENCE Notes The drawing is the property of the architect and is not be copied reproduce without prior permission. All dimensions are in Millimeters. All measurements are taken from the floor finish. Dimensions are to be read and not be scaled. All dimensions on site should be verified before commencing any work and case any discrepancy noticed, the same shall be brought the notice of the architect and shall be clarified before execution work. All drawings are to be read conjunction with the drawings other consultants. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:20 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-02-10 FOR APPROVAL No. Revisions Description Dated Sign Drg.: GROUND FLOOR Drg. Title: BO/INT/0.712 RECEPTION TABLE

Bluone - Office Corporate

BOQ

1. The drawing is the property of the architect and is not to be copied reproduce without prior permission.

2. All dimensions are in Millimeters.

3. All measurements are taken from the floor finish.

4. Dimensions are to be read and not to be scaled.

6. All drawings are to be read in conjunction with the drawings of other consultants.

7. Do not execute without cross checking with the architects.

Notes:

Bluone - Office Corporate

DETAIL AT BO/INT/T/3.600)

TOILET PAPER HOLDER AS PER VENDOR SPEC.

W.C.AS PER VENDOR SPEC.

HEALTH FAUCET AS PER VENDOR SPEC.

TOILET PAPER HOLDER AS PER VENDOR SPEC. W.C.AS PER VENDOR SPEC.

HEALTH FAUCET AS PER VENDOR SPEC.

DETAIL AT (BO/INT/T/3.601)

HAND DRYER AT 1350 MM HT DETAIL AT B BO/INT/T/3.600)

DETAIL AT C BO/INT/T/3.600)

The drawing the property of the architect and not to be copied reproduce without prior

2. All dimensions are in Millimeters. 3. All measurements are taken from the floor finish.

4. Dimensions are to be read and not to be scaled.

5. All dimensions on site should be verified before

Bluone

Office

Corporate NOTE & REFRENCE

General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUONE 1:100 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828, 01202450293 BHARAT 2021-02-22 FOR APPROVAL No. Revisions Description Dated Sign Drg.: LAYOUT PLAN Drg. Title: THIRD FLOOR REFERENCE PLAN BO/INT/3.101

300 50 750 300 300 BO/INT/T/3.301 04 115 115 BO/INT/T/3.302 05 1250 165 300 1260 985 600 405 405 300 300 03 03 02 02 1295 BO/INT/T/3.301 04 600 900 170 2360 685 1150 BO/INT/T/3.302 05 600 215 600 250 600 400 150 ℄ ℄ ℄ ℄ ℄ ℄ ℄ ℄ LEDGE WALL UP TO 1200 MM HT WITH BLACK GRANITE ON TOP COUNTER AT 800 MM HT UNDER COUNTER BASIN AS PER SELECTION UNDER COUNTER SOAP DISPENSER AS PER SELECTION MERINO PARTITION BETWEEN URINALS AS PER VENDOR SPEC. 485 490 30 LEDGE WALL UP TO 1200 MM HT WITH BLACK GRANITE ON TOP 1835 1445 2535 1380 LEDGE WALL UP TO 1200 MM HT WITH BLACK GRANITE ON TOP 3995 3905 3520 1300 2015 METAL PORTAL A1 BO/INT/T/3.602 METAL PORTAL A2 BO/INT/T/3.602 UNDER COUNTER SOAP DISPENSER AS PER SELECTION ℄ UNDER COUNTER BASIN AS PER SELECTION METAL PORTAL B1 BO/INT/T/3.603 ℄ METAL PORTAL B2 BO/INT/T/3.603

AT D BO/INT/T/3.600)

AT E (BO/INT/T/3.600)

AT C (BO/INT/T/3.600) URINAL AS PER VENDOR SPEC. PAPER ROLL HEALTH FAUCET AS PER VENDOR SPEC. 20 MM CUBICAL PARTITION BOARD AS PER VENDOR TOILET PAPER HOLDER AS PER VENDOR SPEC. W.C. AS PER VENDOR SPEC. TOILET PAPER HOLDER AS PER VENDOR SPEC. W.C. AS PER VENDOR SPEC. HEALTH FAUCET AS PER VENDOR SPEC. UNDER COUNTER SOAP DISPENSER AS PER SELECTION

DETAIL

DETAIL AT A BO/INT/T/3.600) DETAIL

DETAIL

UNDER COUNTER SOAP DISPENSER AS PER SELECTION HAND DRYER AT 1350 MM HT

℄ ℄ ℄ ℄ PAPER ROLL W.C. H.F. H.F. W.C. EQ. EQ. EQ. EQ. EQ. EQ. ℄ ℄ ℄ ℄ ℄ ℄ EQ. EQ. EQ. EQ. PAPER ROLL W.C. H.F. PAPER ROLL W.C. H.F. ℄ EQ. EQ. 50 1560 325 645 325 1000 115 900 ℄ 1665 EQ. EQ. ℄ ℄ 1555 BRICK TILE (T3) BRICK TILE (T3) BLACK TILE (T1) BLACK TILE (T1) 150 150 06 06

DETAIL AT H (BO/INT/T/3.601) NOTE & REFRENCE Notes

permission.

commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. 6. All drawings are to be read in conjunction with the drawings of other consultants. 7. Do not execute without cross checking with the architects. General Notes Project: Drg.: TOILET FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:25 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-02-22 FOR APPROVAL No. Revisions Description Dated Sign North: Drg. Title: BO/INT/T/3.100 THIRD FLOOR LAYOUT PLAN

2. All dimensions are in Millimeters.

All measurements are taken from the floor finish. 4. Dimensions are to be read and not to be scaled.

6. All drawings are to be read in conjunction with the drawings of other consultants. 7. Do not execute without cross checking with the architects.

Bluone - Office Corporate Corporate

BOQ for toilet wing. Selection of materials and coordination with contractor and other people on the site.

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

Bluone - Office

BAL. 2400 4 FULL TILES 3600 / 6 FULL TILES 4800 / 8 FULL TILES 1800 3 FULL TILES 2400 4 FULL TILES ℄ 355 1275 F.D FLOOR DRAIN F.T F.T- FLOOR TRAP T2 START 19 MM GRANITE STONE 175 175 BO/INT/T/3.101 NOTE & REFRENCE Notes 1. The drawing the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are in Millimeters. 3. All measurements are taken from the floor finish. 4. Dimensions are to be read and not to be scaled. 5. All dimensions on site should be verified before commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. 6. All drawings are to be read in conjunction with the drawings of other consultants. 7. Do not execute without cross checking with the architects. General Notes Project: Drg.: TOILET FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:25 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-02-22 FOR APPROVAL No. Revisions Description Dated Sign North: Drg. Title: THIRD FLOOR FLOORING

BOQ

665 SECTION- 04 150 1950 1200 420 W.C. FLUSH PAPER ROLL H.F. MIRROR SECTION- 03 WASH BASIN W.C. W.C. 665 270 MIRROR FLUSH PAPER ROLL H.F. W.C. 1200 200 550 250 1300 COUNTER TOP LEVEL LEVEL +800 FINISHED FLOOR LEVEL +00 FALSE CEILING LEVEL LEVEL +2400 LINTEL LEVEL LEVEL +2100 20 MM CUBICAL PARTITION BOARD AS PER VENDOR 20X20MM SQUARE HOLLOW PIPE FOR PORTAL A1 BO/INT/T/3.602) MIRROR FIXED ON BOARD COUNTER TOP LEVEL LEVEL +800 FINISHED FLOOR LEVEL +00 FALSE CEILING LEVEL LEVEL +2400 LINTEL LEVEL LEVEL +2100 FALSE CEILING 20X20MM SQUARE HOLLOW PIPE FOR PORTAL B1 BO/INT/T/3.603) FALSE CEILING MIRROR FIXED ON BOARD FALSE CEILING 20 MM CUBICAL PARTITION BOARD AS PER VENDOR MERINO PARTITION BETWEEN THE URINALS 19 MM STONE TO BE FIXED WITH MORTAR AND FLUSHED WITH THE TILE DETAIL AT A BO/INT/T/3.600) 1280 20 1200 2400 880 205 350 1100 345 210 60 1300 550 210 250 250 655 880 20 100 55 20 550 55 1100 SUNKEN TO BE VERIFIED AS PER SITE CONDITION SUNKEN TO BE VERIFIED AS PER SITE CONDITION DETAIL AT BO/INT/T/3.600) 2400 1200 WINDOW AS PER VENDOR DETAIL 1200 200 550 2075 100 DETAIL AT C BO/INT/T/3.600) CONCEALED FLUSHING WALL CISTERN AS PER VENDOR SPEC. CONCEALED FLUSHING WALL CISTERN AS PER VENDOR SPEC. SURFACE MOUNTED MIRROR LIGHT AS PER SELECTION DETAIL AT C BO/INT/T/3.600) VANITY DETAIL AT BO/INT/T/3.600) VANITY DETAIL AT B BO/INT/T/3.600) 420 URINAL AS PER VENDOR SPEC. 20 20 SURFACE MOUNTED MIRROR LIGHT AS PER SELECTION 420 600 600 420 600 600 1050 BLACK TILE (T1) BRICK TILE (T3) BRICK TILE (T3) 780 780 NOTE REFRENCE Notes

permission.

1. The drawing

the property of the architect and is not to be copied reproduce without prior

General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:25 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828, 01202450293 VANSHIKA 2021-02-22 FOR APPROVAL No. Revisions Description Dated Sign Drg.: TOILET Drg. Title: THIRD FLOOR SECTION 3,4 BO/INT/T/3.301

Bluone - Office Corporate Corporate

V ray rendered views of toilets

1. The drawing is the property of the architect and is not to be copied reproduce without prior permission.

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

Bluone - Office

115 20 150 20 MM THICK BRICK TILE OUTSIDE STONE TO BE FIXED WITH MORTAR INSIDE 10 MM THK. MORTAR DETAIL AT A LEDGE WALL EDGE DETAIL SCALE 1:8 2 MM THICK GROVE BETWEEN STONE AND BRICK TILE INSIDE OUTSIDE STONE TO BE FIXED WITH MORTAR MM VITRIFIED TILE FIXED WITH MOTAR 10 MM THK. MORTAR DETAIL AT E WINDOW EDGE DETAIL SCALE 1:8 25X25 ALUMINUM U CHANNEL 18 MM THICK BRICK TILE MM THICK TILE AS PER SELECTION FIXED WITH MOTAR DETAIL AT C BRICK TILE AND VERIFIED TILE JUNCTION DETAIL SCALE 1:4 MM THICK TILE AS PER SELECTION 8 ALUMINUM CHANNEL 8 MM THICK TILE AS PER SELECTION DETAIL AT D VERIFIED TILE CORNER DETAIL SCALE 1:4 12 MM THICK PLASTER 20X20MM SQUARE HOLLOW PIPE FOR PORTAL 19 MM STONE FASCIA FIXED WITH ARALDITE ON BOARD 20 20 20 315 19 MM STONE COUNTER TOP FIXED WITH ARALDITE ON BOARD 20 MM THICK BOARD UNDERCOUNTER WASHBASIN DETAIL AT VANITY DETAIL SCALE 1:10 DETAIL AT B.1 DETAIL AT B.2 800 19 MM STONE COUNTERTOP FIXED WITH ARALDITE ON BOARD 20 20 20 MM THICK BOARD 20 19 MM STONE FASCIA FIXED WITH ARALDITE ON BOARD LAMINATE AS PER SELECTION EDGE TAPE DETAIL B.1 SCALE 1:5 130 20 200 2 19 MM STONE COUNTER TOP FIXED WITH AEROLITES ON BOARD 19 MM STONE TO BE FIXED WITH MORTAR 20 20 MM THICK BOARD MM GROVE BETWEEN STONE AND TILE DETAIL AT B.2 SCALE 1:5 20 MM THICK BOARD 8 MM THICK TILE AS PER SELECTION FIXED WITH MOTAR GRANITE AND TILE TO BE FLUSHED FALSE CEILING LEVEL LEVEL +2400 WINDOW LINTEL LEVEL LEVEL +2500 FALSE CEILING DETAIL AT F1 CEILING EDGE DETAIL SCALE 1:8 50 MM THICK TILE FIXED ON CEMENT SHEET WITH MOTAR 18 MM THICK CEMENT SHEET FIXED ON METAL FRAME 50X50 METAL FRAME 100 NOTE REFRENCE Notes

All dimensions are in Millimeters. 3. All measurements are taken from the floor finish. 4. Dimensions are to be read and not to be scaled. 5. All dimensions on site should be verified before commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. 6. All drawings are to be read in conjunction with the drawings of other consultants. 7. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE AS MENTIONED Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828, 01202450293 VANSHIKA 2021-02-22 FOR APPROVAL No. Revisions Description Dated Sign Drg.: TOILET Drg. Title: BO/INT/T/3.600 THIRD FLOOR DETAILS

BOQ

Different stages of work done on site

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

Bluone - Office

100 SLIDING DOOR LACQUERED GLASS GLASS DOOR LACQUERED GLASS FINISHED FLOOR LEVEL +00 SLAB BOTTOM LEVEL +3740 METAL RACK TOP LEVEL +2700 GI TRAY DETAIL REF: BO/INT/3.104 1855 745 100 1040 2700 SLIDING DOOR LACQUERED GLASS GLASS DOOR LACQUERED GLASS FINISHED FLOOR LEVEL +00 SLAB BOTTOM LEVEL +3740 METAL RACK TOP LEVEL +2700 ELEVATION AT WALL LEVEL GI TRAY DETAIL REF: BO/INT/3.104 250 BRICK TILE BRICK TILE BRICK TILE BRICK TILE BRICK TILE 2600 1040 1480 1220 WAY TO TOILET METAL RACK BO/INT/3.741 METAL RACK B BO/INT/3.742 METAL RACK BO/INT/3.743 METAL RACK BO/INT/3.744 ELEVATION AT RACK LEVEL D.B. WAY TO TOILET METAL RACK BO/INT/3.741 METAL RACK B BO/INT/3.742 METAL RACK BO/INT/3.743 METAL RACK BO/INT/3.744 PLAN AT 1200 MM HT WAY TO TOILET RACK IN 2MM THK. METAL SHEET FINISHED IN AUTOMOTIVE PAINT 300 2400 5MM THICK LACQUERED GLASS FIXED ON 12 MM THICK PLYWOOD START START START START START 100 UPHOLSTERY 75 MM THICK FOR SEATING AND SIDES AS PER SPECS. 2600 495 1860 3350 4510 BRICK TILES (75X230X20 MM) UPTO TOTAL HEIGHT OF 2700MM, FIXED WITH 12MM THK. MORTAR 100MM HIGH SKIRTING IN TILE-T1 FLUSHED WITH BRICK TILES 1040 ENTRANCE GLASS PARTITION REF: BO/INT/3.772 PANTRY LIFT LOBBY LOCKERS NOTE & REFRENCE Notes 1. The drawing the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are in Millimeters. 3. All measurements are taken from the floor finish. 4. Dimensions are to be read and not to be scaled. 5. All dimensions on site should be verified before commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. 6. All drawings are to be read in conjunction with the drawings of other consultants. 7. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:75 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828, 01202450293 VANSHIKA 2021-02-16 FOR APPROVAL No. Revisions Description Dated Sign Drg.: Drg. Title: THIRD FLOOR RACK ELEVATION BO/INT/3.740 RCM FLOOR

Bluone - Office Corporate Corporate

BOQ

1. The drawing the property of the architect and not to be copied reproduce without prior

2. All dimensions are in Millimeters.

3. All measurements are taken from the floor finish.

4. Dimensions are to be read and not to be scaled.

6. All drawings are to be read in conjunction with the drawings of other consultants.

Do not execute without cross checking with the architects.

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

Bluone - Office

LEVEL +800 MM COUNTER TOP LEVEL FINISHED FLOOR LEVEL LVL. ±00 FALSE CEILING LEVEL LEVEL +2400 LINTEL LEVEL LEVEL +2400 SECTION 1 OVERHEAD STORAGE 575 OPEN SHELF UNDER COUNTER STORAGE SECTION 2 OPEN SHELF 600 600 SINK FIXED SHELF FIXED SHELF 580 395 295 SPACE FOR REFRIGERATOR EQ EQ EQ EQ 330 900 850 430 850 800 575 625 400 1375 625 2400 40 100 FIXED SHELF FIXED SHELF 280 EQ EQ EQ EQ 395 295 860 810 1665 25 SKIRTING 25MM RECESS HANDLE FOR UNDER COUNTER STORAGE SINK STONE COUNTER TOP AS PER SELECTION UNDER COUNTER STORAGE 2100 OPEN SHELF PLYWOOD 18 MM THICK FINISHED IN 1MM THICK LAMINATE AS PER SELECTION PLYWOOD 18 MM THICK FINISHED IN 1MM THICK LAMINATE AS PER SELECTION STONE COUNTER TOP AS PER SELECTION SINK LEVEL +800 MM COUNTER TOP LEVEL FINISHED FLOOR LEVEL LVL. ±00 FALSE CEILING LEVEL LEVEL +2400 LINTEL LEVEL LEVEL +2400 OVERHEAD STORAGE 150 150 100 950 150 150 100 950 2NOS.16A SOCKET CONTROL BY 16A SWITCH (RAW POWER)AT 950 MM HT 2NOS.16A SOCKET CONTROL BY 16A SWITCH (RAW POWER)AT 950 MM HT DWG.No.: BO/INT/3.901 3RDFLOOR SECTIONS 1,2 NOTE & REFRENCE Notes 1. The drawing the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are in Millimeters. 3. All measurements are taken from the floor finish. 4. Dimensions are to be read and not to be scaled. 5. All dimensions on site should be verified before commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. 6. All drawings are to be read in conjunction with the drawings of other consultants. 7. Do not execute without cross checking with the architects. General Notes Project: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN BLUEONE 1:25 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828, 01202450293 VANSHIKA 2021-02-22 FOR APPROVAL No. Revisions Description Dated Sign Drg.: TOILET Drg. Title:

Bluone - Office Corporate Corporate

850 TEA COFFEE MACHINE 900 PLAN AT 600 MM HT. OVEN SINK 1665 600 350MM DEEP OVERHEAD STORAGE 510 WATER DISPENSER 310 900 800 185 1665 600 SINK 900 510 900 185 20 SPACE FOR REFRIGERATOR 610 285 300 410 01 01 02 02 PLAN AT 1200 MM HT. 850 BO/INT/3.902 03 BO/INT/3.902 03 BO/INT/3.902 04 BO/INT/3.902 04 WATER DISPENSER 700 840 05 05 535 650 COUNTER TOP IN 20 MM THICK STONE FIXED OVER MARINE PLY 19 MM THICK 350MM DEEP OVERHEAD STORAGE 01 01 02 02 BO/INT/3.902 03 BO/INT/3.902 03 BO/INT/3.902 04 BO/INT/3.902 04 05 05 2NOS.16A SOCKET CONTROL BY 16A SWITCH (RAW POWER)AT 950 MM HT 100 150 150 2NOS.16A SOCKET CONTROL BY 16A SWITCH (RAW POWER)AT 600 MM HT 2NOS.16A SOCKET CONTROL BY 16A SWITCH (RAW POWER)AT 950 MM HT 150 2NOS.16A SOCKET CONTROL BY 16A SWITCH (RAW POWER)AT 600 MM HT 100 150 PANTRY ELECTRICAL POINT PANTRY ELECTRICAL POINT PANTRY ELECTRICAL POINT PANTRY ELECTRICAL POINT DWG.No.: BO/INT/3.900 3RD FLOOR PANTRY LAYOUT NOTE & REFRENCE Notes

permission.

BOQ

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

V ray rendered views of toilets

for toilet wing. Selection of materials and coordination with contractor and other people on the site.

Bluone - Office

- Office Corporate Corporate

Bluone

Different stages of work done on site

BOQ BOQ

Aanand vilas - Mr. Seth’s residence

The essence of less is more, a sense of minimalist design, keeping surroundings simple and uncluttered by adhering to the bare essentials. The aesthetics evolved around clean and uncluttered living, with utmost utility holding tightly the balance of form vs function,and a love for natural beauty.

Residential Residential

Learning outcome - Design process is back and forth, with consideration of budget and client comments, elements that makes the spaces changes like lighting design, furniture elements layout design, colors and texture of the space and many more things. Every element combines together to form a unique essence of the space.

Aanand vilas - Mr. Seth’s residence

Learning outcome - was involved in different parts of the projects including measured drawing, electrical layout ,kitchen layout, furniture design and generating drawings for the same.

3D modeling and rendering. Designing the wardrobes and toilets and generating drawings for the same selections of lights, materials, textures and furniture for the spaces.

3550 1185 3250 3600 200 1130 1130 400 930 2130 845 115 285 1170 2340 1085 1085 1775 2000 2170 385 1085 1085 450 450 975 1030 800 800 1090 490 8795 150 3610 325 1555 1585 1585 2025 1855 1320 460 Ø1000 395 2260 475 475 400 1605 170 1130 1130 2260 1000 1000 535 665 4590 610 705 700 700 1525 1400 2805 1500 3170 975 1200 1200 1200 1200 1200 1200 740 450 800 450 1105 1115 1115 1115 400 400 560 1115 560 3340 1200 600 600 1130 1130 565 LEGEND UPLIGHTERS /DOWNLIGHTERS SPOT LIGHT COVE LIGHT GYPSUM FALSE CEILING FEATURE LIGHT C.O.B SET OF TWO MAGNETIC TRACK LIGHT C.O.B SURFACE MOUNTED LIGHT GRID FALSE CEILING WOODEN FALSE CEILING DISK LIGHT 450 865 865 865 NOTE & REFERENCE Notes The drawing is the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are Millimeters. All measurements are taken from the floor finish. 4. Dimensions are to be read and not be scaled. All dimensions on site should be verified before commencing any work and in case any discrepancy noticed, the same shall be brought the notice of the architect and shall be clarified before execution work. All drawings are to be read in conjunction with the drawings other consultants. Do not execute without cross checking with the architects. General Notes Project: Drg.: PLAN FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN AANANDVILAS 1:75 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-06-29 FOR APPROVAL No. Revisions Description Dated Sign North: Drg. Title: RCP 12'-11" 13'-2" 3'-1" 7'-3" 2'-8" 2'-1" 4'-11" 7'-3" 4'-2" 5'-7" 7'-8" 5'-11" 7'-3" 22'-2" 14'-2" 1'-5" 6'-7" 2'-4" 2'-2" 13'-11" 3'-2" 1'-10" 7'-4" 9'-7" 11'-2" 4'-11" 6'-3" 9'-10" 18'-9" 9'-4" 6'-11" 2'-10" 2'-9" 1'-3" 11' 4'-10" 3' 2'-7" 12'-10" 2' 6'-10" 2' 1'-7" 10'-2" 3'-7" 10'-2" 2'-11" 1'-9" 3'-11" 3'-2" 2'-5" 6'-7" 8'-2" 3'-3" 3'-7" 4'-2" 2'-2" 11'-2" 8'-11" 9" 4'-3" 1'-4" 2'-5" 2'-9" 1'-7" 12'-10" 5'-2" 2'-5" 16'-9" 2'-4" 2'-8" 2'-11" 3'-6" 2'-9" 8'-2" NOTE & REFERENCE Notes The drawing is the property of the architect and not to be copied reproduce without prior permission. 2. All dimensions are Millimeters. All measurements are taken from the floor finish. 4. Dimensions are to be read and not be scaled. All dimensions on site should be verified before commencing any work and in case any discrepancy noticed, the same shall be brought the notice of the architect and shall be clarified before execution work. All drawings are to be read in conjunction with the drawings other consultants. Do not execute without cross checking with the architects. General Notes Project: Drg.: PLAN FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN AANANDVILAS 1:50 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-05-30 FOR APPROVAL No. Revisions Description Dated Sign North: Drg. Title:

Aanand vilas - Mr. Seth’s residence

Learning outcome - was involved in different parts of the projects including measured drawing, electrical layout ,kitchen layout, furniture design and generating drawings for the same.

3D modeling and rendering. Designing the wardrobes and toilets and generating drawings for the same selections of lights, materials, textures and furniture for the spaces.

Learning outcome - was involved in different parts of the projects including measured drawing, electrical layout ,kitchen layout, furniture design and generating drawings for the same.

3D modeling and rendering. Designing the wardrobes and toilets and generating drawings for the same selections of lights, materials, textures and furniture for the spaces.

D WE D AW D AW AW D WE R W R 1 5 0 m m 1 5 0 m m 1 5 0 m m 1 5 0 m m 1 6 0 m m 2 0 m m 2 0 m m 20MM PARTIT ON N VENEER F NISH 20MM SHUTTER N VENEER INISH 20MM BACK PLY IN VENEER INISH MATTRESS AS SE ECT ON 20MM SHUTTER IN VENEER F NISH 20MM SPACE FOR CHANNEL 1 9 0 m m 1 3 0 m m 3 3 0 m m 9 0 m m 2 0 0 m m 5 0 m m 20MM SHUTTER N VENEER F N SH 20MM SPACE FOR CHANNEL 20MM PLY N VENEER FIN SH 1 8 5 0 m m 1 9 0 m m 2 5 0 m m 2 5 0 m m 2 5 0 m m 2 5 0 m m 2 5 0 m m 2 5 0 m m 2 0 0 m m 1 3 0 m m 9 0 5 0 MATTRESS AS SELECT ON 20MM SHUTTER IN VENEER AND LAMINATE F N SH 20MM THICK SHELF PART TIONS N VENEER F NISH 20MM THICK BACK P Y N VENEER FIN SH 20MM SHUTTER N LAM NATE F N SH MATTRESS AS/SELECT ON 20MM SHUTTER IN LAMINATE F NISH 20MM SHUTTER IN VENEER F N SH 20MM SHUTTER IN LAMINATE F N SH ECT ON AT SECT ON AT D S CTION AT E 1 3 0 m m 2 0 0 m m DRAWER DRAWER REFER TO DETAIL A DE AIL A 1 9 0 m m 1 0 m m 1 3 0 m m 1 4 0 m m 9 0 m m 5 0 3 3 0 m m 20MM SHUTTER N VENEER F N SH TAPERED EDGE TO OPEN THE DRAWER 20MM SHUTTER N AMINATE F NISH 1 5 0 m m D AWE DRAWER DRAWER 100MM SK RTING DRAWER PULL OUT IN VENEER F N SH 20MM P Y N VENEER F N SH 20MM RECESSED PLY IN VENEER F N SH MATTRESS AS/SELECTION 50 mm DRAWER RECESSED BY 50MM FROM THE TOP DRAWER DRAW R 20 mm 1 5 0 m m 2 8 0 m m 2 0 0 m m 40 mm 0 mm 4 0 m m 2 0 m m 935 mm MATTRESS AS/SELECTION 50MM 100MM UPHOLSTERY AS/SELECTION 20MM BACK PLY DRESS NG CUPBOARD IN VENEER F N SH AS PER DETA L 100MM SK RT NG 1 0 0 m m 3 2 0 m m 1 3 0 m m 7 5 0 m m 9 7 0 m m 1 8 5 0 m m 2 0 0 m m 1 3 0 m m 3 0 0 m m 2 0 0 m m 50 mm 1 3 0 m m 1 3 0 m m 2 0 0 m m 8 8 0 m m 2 0 m m 2 0 m m 20 mm 6 3 mm 1 0 0 m m 20MM BACKPLY W TH 100MM UPHOLSTERY 20MM SHUTTER N VENEER INISH 20MM SHUTTER N VENEER INISH D AWE DRAWER DRAW R D AWE DRAW R DRAWER 20MM SPACE FOR CHANNEL 5MM TAPERED EDGE FOR DRAWER OPENING DRAWER N VENEER F NISH DRAWER N LAM NATE FINISH MATTRESS AS SELECT ON SECT ON A A SEC ION AT B SIDE ELEVAT ON 1 4 0 m m

Aanand vilas - Mr. Seth’s residence Residential Residential

Learning outcome - was involved in different parts of the projects including measured drawing, electrical layout ,kitchen layout, furniture design and generating drawings for the same.

3D modeling and rendering. Designing the wardrobes and toilets and generating drawings for the same selections of lights, materials, textures and furniture for the spaces.

Learning outcome - was involved in different parts of the projects including measured drawing, electrical layout ,kitchen layout, furniture design and generating drawings for the same.

3D modeling and rendering. Designing the wardrobes and toilets and generating drawings for the same selections of lights, materials, textures and furniture for the spaces.

Aanand vilas - Mr. Seth’s residence Aanand vilas - Mr. Seth’s residence Residential Residential

Aanand vilas - Mr. Seth’s residence

V ray rendered views of toilets

Tagore park - Mr. Amitabh’s residence Residential Residential

Learning outcome - was involved in different parts of the projects including measured drawing, electrical layout ,kitchen layout, furniture design and generating drawings for the same.

3D modeling and rendering. Designing the wardrobes and toilets and generating drawings for the same selections of lights, materials, textures and furniture for the spaces.

The site was situated in tagore park in Delhi, It was a stilt plus four story residential building which radiated the essence of earthiness and rawness at its best. The design was fairly simple and minimal including earthy materials like lime plaster and raw brick and stone textures which enhanced the spaces even more.

Learning outcome - For client presentation 3D views and different style of representation helps to visualize the space in a better way. This project was a little different as the elements like furniture, feel and texture were very specific by the client. Creating something different with minimal use of textures was a real task in this project.

14 UP 12 16 11 15 17 18 POWDER TOILET 7'2"X4' LIVING DINING STUDY TOILET 16'3"/11'X35' 8'5"X16' 4'10"X11'6" LEGEND PLUMBING SHAFT PLUMBING SHAFT SHAFT DRESS 8'7"X4'10" WIDE 13'4"X16'4" LEGEND PLUMBING SHAFT PLUMBING SHAFT SHAFT SHAFT BALCONY 9'9"X2'5" DAUGHTER'S BEDROOM UTILITY DOUBLE S2-C S2-D TPR/A/303 PR/A/303 3420 1900 1830 2505 3420 2085 890 115 1730 FIRST FLOOR SECOND FLOOR 2505 10 11 10 13 17 12 16 18 19 UP 16 15 14 UP TOILET KITCHENETTE 11'X13'2" 5'3"X7'9" 8'6"X11'3" REAR ROOM S.NO DESCRIPTION DIMENSIONS LEGEND FRONT ROOM 11'X17'8" TOILET 8'6"X6' DRESS KITCHENETTE LIVING DINING STUDY TOILET 15'8"X13'9" 13'4"X16'4" S.NO DESCRIPTION DIMENSIONS LEGEND BALCONY FRONT BALCONY DOUBLE HEIGHT PLUMBING SHAFT SHAFT PLUMBING SHAFT ELECTRICAL/ SHAFT SHAFT POOJA BEDROOM 8'8"X4'10" WIDE 8'8"X6'2" 16'4"X11'6" 15'10"X2'6" 11'3''X7'10" WIDE 4'X2' ATRIUM 16'2''X13'5" FRONT TPR/A/303 TPR/A/303 TPR/A/303 TPR/A/303 11 2505 THIRD FLOOR FOURTH FLOOR FIRKI studio NIKHIL Date: Drawn Scale: 1:75 @ A2 FOR TENDER FOR INFORMATION FOR EXECUTION FOR APPROVAL N Project: Drg. Title: TAGORE PARK RESIDENCE 1. All dimensions are in millimeters. 2. Dimensions are to be read and not to be scaled. 3. All dimensions on site should be verified before commencing any work and in case any discrepancy is noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. NOTES AND REFERENCES GENERAL NOTES 2021-03-08 SECTION DWG:

Tagore park - Mr. Amitabh’s residence Residential Residential

1. The drawing is the property of the architect and is not to be copied reproduce without prior permission.

2. All dimensions are in Millimeters.

3. All measurements are taken from the floor finish.

4. Dimensions are to be read and not to be scaled.

5. All dimensions on site should be verified before commencing any work and in case any discrepancy noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work.

6. All drawings are to be read in conjunction with the drawings of other consultants.

7. Do not execute without cross checking with the architects.

Tagore park - Mr. Amitabh’s residence

Learning outcome - was involved in designing the staircase and generating the drawing for the same. Good for construction drawings of toilets of all the floors. Kitchen and wardrobes drawing Flooring design was as important as the walls.

drawings are to be read in conjunction with the drawings of other consultants.

Do not execute without cross checking with the architects.

1105 1100 22 23 24 25 26 28 29 30 35 36 UP T= 300 R= 178 W= 1200 NO. OF STEPS 17 2595 25 760 1200 1180 800 400 METAL RAILING PER DETAIL 100X200MM C-SECTION FOR SUPPORT 25X75MM METAL STRINGER CNC CUT UP 03 04 05 06 07 08 10 11 12 15 16 09 17 18 19 37 10 DW 10 DW 10 DW 10 DW 10 DW T= 300 R= 187.5 W= 1100 NO. OF STEPS 20 1647 2445 800 400 400 230 430 BASEMENT PLAN STILT PLAN X X' Y' Y Z' Z W W' Y' Y Z' Z 20 X X' W W' 14 27 32 33 34 21 31 38 NOTE & REFRENCE Notes

General Notes Project: Drg.: FIRKI studio DRAWN: SCALE: DWG.No.: FOR TENDER FOR INFORMATION FOR EXECUTION DATE: KEY PLAN TAGORE PARK 1:100 @ A3 Address: C-35,SECTOR- 105 Noida Delhi NCR, U.P.-201303 Contact 9953115828 VANSHIKA 2021-03-12 FOR APPROVAL No. Revisions Description Dated Sign North: Drg. Title: PLAN W 06 W 06 W 06 W 06 W 02 03 75X25MM METAL STRINGER FINISHED IN WHITE AUTOMOTIVE PAINT T= 250 R= 187 W= 1200 5MMX5MM METAL MEMBERS AS RAILING F.F.L. +3050 T.O.S. 3000 F.F.L. +6050 T.O.S. 6000 F.F.L. +9050 T.O.S. 9000 F.F.L. +12050 T.O.S. 12000 T.O.S. 15000 F.F.L. +15200 F.F.L. +200 T.O.S. 150 ROAD LVL. F.F.L. -3500 T.O.S. 3600 T.O.S. 16200 T.O.S. 17600 STILT FLOOR BASEMT FLOOR FIRST FLOOR SECOND FLOOR THIRD FLOOR FOURTH FLOOR TERRACE PARAPET MUMTY T.O.S. 18100 MUMTY PARAPET LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL SECTION AT YY' DETAIL A- REFER TO DRAWING NO. DETAIL B- REFER TO DRAWING NO. F.F.L. +3050 T.O.S. 3000 F.F.L. +6050 T.O.S. 6000 F.F.L. +9050 T.O.S. 9000 F.F.L. +12050 T.O.S. 12000 T.O.S. 15000 F.F.L. +15200 F.F.L. +200 T.O.S. 150 F.F.L. -3500 T.O.S. 3600 T.O.S. 16200 T.O.S. 17600 STILT FLOOR BASEMT FLOOR FIRST FLOOR SECOND FLOOR THIRD FLOOR FOURTH FLOOR TERRACE PARAPET MUMTY T.O.S. 18100 MUMTY PARAPET LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL LINTEL LEVEL 5MMX5MM METAL MEMBERS AS RAILING DETAIL A- REFER TO DRAWING NO. DETAIL B- REFER TO DRAWING NO. 75X25MM METAL STRINGER FINISHED IN WHITE AUTOMOTIVE PAINT SECTION AT ZZ' NOTE & REFRENCE Notes 1. The drawing is the property of the architect and is not to be copied reproduce without prior permission. 2. All dimensions are in Millimeters. 3. All measurements are taken from the floor finish. 4. Dimensions are to be read and not to be scaled. 5. All dimensions on site should be verified before commencing any work and in case any discrepancy noticed, the same shall be brought to the notice of the architect and shall be clarified before execution of work. 6. All

Tagore park - Mr. Amitabh’s residence Tagore

A m n n m me e D m s o a e d d o o e s d A m n n h u d e e b e mm c n n w k n s n e a y n d e s me s b u o h o c e a c a d s a a e o x u o w k

Learning outcome - was involved in designing the staircase and generating the drawing for the same. Good for construction drawings of toilets of all the floors.

Kitchen and wardrobes drawing Flooring design was as important as the walls.

m n s a m m e D m s o e e e d a d o e s d m n s o h u d b e c mm c n n w k n n s n e n y o c same s b b g h

Learning outcome - was involved in designing the staircase and generating the drawing for the same. Good for construction drawings of toilets of all the floors.

Kitchen and wardrobes drawing Flooring design was as important as the walls.

O R E A T Y- 2 D OO G T T L N N L V I N G N A T AW Y D R S C-3 S T R- 0 O A D C - 1 O A - 9 1 8 TAGORE PARK 4-03-2 21 V NSH KA F I R K I s t u d i o

NOTES & R FERENCES

G NERA NOTES -

KE PLAN e D s p o p d 1 0 O O N O E O T O A 2320 mm 470 mm 390 mm 6 1 0 m m 910 mm 6 1 0 BUILT N HOB AS PER SE ECT ON BREAKFAST COUNTER HIGH CHA RS AS PER SELECTION REFR GERATOR AS PER SELECT ON S NK AS PER SELECTION 450 mm 450 mm REFR GERATOR AS PER SELECT ON S NK AS PER SELECTION 75MM SK RT NG BACKSPLASH T LES AS PER SELECTION 1 0 6 2 m m 5 2 0 m m 8 5 0 m m B A C E EVATION C V EW 1 V EW 2 V EW 3 PLAN E P O S E P N R - 2 D O R D G T T L N AN L A ON D G N S A D T D AW D RE -3 S O - 0 O E C U - 13 O A - 5 5 8 TAGORE PARK 4-03- 021 V NSH KA F I R K I s t u d i o NOTES & REFERENCES GEN RA NOTES -

o e e a c a d s e o x u o w k K Y PLAN R v D c p o p d : 0 O O O X O N O A R A T Y- OO A ON Y R S C-3 T RA D 1 9 1 TAGORE PARK 4-03-2 21 A R FERENCES G NERA A n me a o A n e e d nc a n d e s me a u o c a c a o KE e s 1 N E T 1275 mm 1 3 7 5 m m 5 0 m m 1 5 0 m m 8 5 0 m m BREA META AST HANG PER S STON 1275 mm REFR PER S 600 mm 600 mm 600 mm 600 mm 780 600 mm 600 mm 600 mm 300 mm R W R R W R R W R R W R R W R R W R D WE D WE D WE L U O E U 230 mm BREAKFAST COUNTER BUILT N HOB AS PER SELECTION BACKSPLASH T LES AS PER SELECT ON L U P U P ELEVAT ON A ELEVATION B ELEVATION E 3 0 mm 60 mm 37 mm D W R D W R R W R C R E P OUT G N R E HANGING L GHTS AS PER SELECTION BREAKFAST COUNTER 75MM SKIRT NG

Residential Residential

park - Mr. Amitabh’s residence

Amitabh’s residence

Miscellaneous works Residential

FALSE CEILING

6.1GRID CEILING

ProvidingandlayingVitrifiedtilesonwallsindifferentsizes (thickness to be specified by manufacturer), with water absorption lessthan0.08%andconformingtoI.S.15622,ofapproved make,inallcolours&shade,inskirting,riserofsteps,over12 mmthickbedofcementmortar1:3(1cement:3coarsesand), includingepoxygroutingthejointwithmatchingpigmentsetc.

ProvidingandlayingBricktilesindifferentsizes(thicknesstobe specifiedbymanufacturer),withwaterabsorptionlessthan0.08 %andconformingtoI.S.15622,ofapprovedmake,inallcolours &shade,inskirting,riserofsteps,over12mmthickbedof cementmortar1:3(1cement:3coarsesand),includinggrouting

Providingandfixing18mmthickgangsawcut,mirrorpolished, premouldedandprepolished,machinecutgranitestonefor kitchenplatforms,vanitycounters,windowsills,faciasand similarlocationsofrequiredsize,approvedshade,colourand texturelaidover20mmthickbasecementmortar1:4(1cement :4coarsesand),jointstreatedwithwhitecement,mixedwith matchingpigment,epoxytouchups,includingrubbing,curing, mouldingandpolishingtoedgestogivehighglossfinishetc.

FIRST FLOOR-FLOORING SECOND FLOOR-FLOORING FIRST FLOOR-FLOORING SECOND FLOOR-FLOORING

approvedbrandandmanufacturetogiveanevenshadewith

Paintingwithplasticemulsionpaint(2ormorecoats)of approvedbrandandmanufacturetogiveanevenshadewith

Allpantingsurfacesshallbesandpaperedandcleaned thoroughly.Thepores,scratchesetc.shallbefilledand smoothenedproperly.Acoatofsurfaces(DucoP.S.Grey)shall beappliedevenly.Thensurfacesshallbesandpaperedand cleaned.AcoatonN.C.puttyshallbeevenlyandallowedtodry completely.Thewaterpolishingwiththehelpofwater–proof emerypapershallbecarriedouttoobtainuniformsmooth/even surface.Secondcoatofducopaintshallbeappliedafterdrying andcleaningofthefirstcoat.Propercareshallbetakensothat nodust,dirtetc.settlesdownonfinishedsurfaces.Thefinal surfaceshallbefinishedevenandmattfinished.Thethinnerand putty used shall be Duco only.

Providingandfixingtiledfalseceilingofapprovedmaterialsof size595x595mmintruehorizontallevel,suspendedoninter lockingmetalgridofhotdippedgalvanizedsteelsections( galvanized@120grams/sqm,bothsideinclusive)consistingof main"T"runnerwithsuitablyspacedjointstogetrequiredlength andofsize24x38mmmadefrom0.30mmthick(minimum) sheet,spacedat1200mmcentertocenterandcross"T"ofsize 24x25mmmadeof0.30mmthick(minimum)sheet,1200mm long spaced between main "T" at 600 mm center to center

Proving and fixing 12.5mm Tapered edge gypsum board conformingtoIS2095-Part1withceilingsectionandperimeter channels0.5mmthk,27mmheigh,havingflangesof20mmand 30mmlong,theperimeterofceilingfixedtowall/partitionwith thehelpofrawlplugsat450mmc/cwith25mmlongdrywall screws@230mmintervalincludingjointingandfixingtoaflush finishoftaperedandsquareedgesoftheboardwith reccomendedfiller,jointingtapes,finisherandtwocoatsof primersuitableforboardaspermanufacturersspecificationand alsoincudignthecostofmakingopeningsoflightfittings,grilles ,diffusers,cutoutsmadewithframeofperimeterchannels suitablyfixedallcompleteasperdrawingandspecificationand directionoftheengineerinchargebutexcludingthecostof painting with

80 92 7393

Learning outcome - Other than drawings there are many more aspects that comes together to complete a project and enhance the relationship with the client as well.

Tagore park - Mr.

S.NO ITEMS SPECIFICATIONS QUANTITY (PER PIECE) AREA/LENGTH (SQFT/FT) UNIT RATECOSTREMARKS 10.76 FLOORING 1.1VITRIFIED TILES ProvidingandlayingVitrifiedtilesonfloorindifferentsizes (thickness to be specified by manufacturer), with water absorption lessthan0.08%andconformingtoI.S.15622,ofapproved make,inallcolours&shade,inskirting,riserofsteps,over12 mmthickbedofcementmortar1:3(1cement:3coarsesand), includingepoxygroutingthejointwithmatchingpigmentsetc. complete 214 134 28707 Basic Rate tile Rs. 60per sft. WALL CLADDING 2.1VITRIFIED TILES

V ray rendered views of toilets

483 146 70505 Basic Rate tile Rs. 60 per sft.

BRICK TILE

complete

2.2EXPOSED

the joint with white cement matching pigments etc. complete 245 157 38466 tile thickness 17mm Basic Rate - Rs 75.00/ sft. STONEWORKS

STONE WORKS

3.1GRANITE

complete all levels 65 342 22116 Basic Rate Rs. 200.00/ sft 3.2 HOLE CUTTING cutting of granite hole for basin and champhering the edges 690 4140 METAL WORK 4.1 20x20MM MS HOLLOW BOX Fabricatingandinstallingatsitemetalframe,asperdesignin MShollowpipe20x20mmwithproperweldingandgrindingand finished in oxide primer 80 115 9241 PAINT FINISH

preperation including wall primer and putty RO 21 5.2CEILING

base preperation including wall primer and putty 71 21 1491

5.1WALLS Paintingwithplasticemulsionpaint(2ormorecoats)of

base

5.3METAL WORKS

81 112 9038 6.2 GYPSUM CEILING

71 83 5894 ELECTRICALS 7.1CONDUITING WIRING Supplying,layingandfixingelectricalconduiting,wiring, boxes,switchesandplatesofapprovedmakeincluding installation of toilet Distribution board 195 179 34861 measured on sft on actual covered area 7.2 SPOT LIGHTS as per selection 2300 11500 7.3 DOWN LIGHTS 1840 9200 BLUONE GROUND FLOOR TOILET FURNITURE QUANTITY REFERENCE LINK SOFA CUMBED1 https://www.thehouseofthings.com/ hattu.html CHAIR https://www.thehouseofthings.com/ furniture/seating/paffe‐1s‐sofa.html 4 SEATER SOFA1 https://www.thehouseofthings.com/ furniture/seating/teal‐chesterfield‐sofa.html SOFA https://www.thehouseofthings.com/ furniture/seating/paffe‐db‐sofa.html TABLE SIDE TABLE1 https://www.gulmoharlane.com/pro ducts/malabar‐hill‐side‐table‐1 CENTER TABLE 1 https://www.gulmoharlane.com/pro ducts/napensea‐coffee‐table‐3 SIDE TABLE1 https://www.thehouseofthings.com/ furniture/tables/rolf‐bedside‐table.html CHAIR https://www.thehouseofthings.com/ furniture/seating/paffe‐1s‐sofa.html SIDE TABLE2 https://www.gulmoharlane.com/pro ducts/bombay‐leather‐clad‐side‐table‐2 BED https://www.gulmoharlane.com/pro ducts/lyon‐french‐bed‐collection‐with‐drawer‐storage‐4 CHAIR https://www.thehouseofthings.com/ furniture/seating/paffe‐1s‐sofa.html COFFEE TABLE1 https://www.thehouseofthings.com/ pila‐2t‐coffee‐table.html MASTER BEDROOM LIVING AREA FAMILY ROOM T‐10 GFC AANAND VILAS GUEST ROOM SON'S ROOM

INTERNSHIP PORTFOLIO VANSHIKA TYAGI