Made To Be The Best! Proven On The Track! ARP is universally recognized as the world leader in Racing Fastener Technology. ARP products have been tested and proven in all forms of automotive competition from Formula 1 to NASCAR, NHRA and IHRA to ADRL, and at local tracks everywhere. There are many convincing reasons why ARP Fasteners are the first choice of engine and race car builders everywhere. First, with ARP's Research and Development team, made up of highly qualified engineers and race-savvy technicians, the development and testing of ARP products could not be in better hands. Next, consider ARP's ultra modern, totally self-reliant manufacturing facility, governed by the stringent production standards one would only expect from a top quality fastener manufacturer. Finally, the outstanding performance and reliability of ARP Fasteners are qualities the world's leading motorsport competitors rely upon race after race.
www.arp-bolts.com
START & WITH FINISH EARL’S (DUOfV 3HUIRUPDQFH 3OXPELQJ EURXJKW DYLDWLRQ IOXLG WUDQVIHU WHFKQRORJ\ WR WKH DXWRPRWLYH DQG PDULQH SHUIRUPDQFH PDUNHWV RYHU IRXU GHFDGHV DJR DQG WRGD\fV WRS WHDPV VWLOO UHO\ RQ (DUOfV :LWK WKH PRVW H[WHQVLYH OLQH RI SOXPELQJ SURGXFWV DYDLODEOH \RX FDQ FRXQW RQ (DUOfV IURP VWDUW WR ILQLVK )URP HYHU\ OHYHO RI KRVH KRVH HQGV DGDSWHUV EUDNH OLQHV UDGLDWRU KHDWHU KRVHV WR FRROHUV JDVNHWV DFFHVVRULHV )URP RXU RULJLQDO DQG QRZ LQGXVWU\ VWDQGDUG SODWLQJ WR RXU FXWWLQJ HGJH +DUG $QRG L]HG SODWLQJ (DUOfV KDV WKH KLJKHVW TXDOLW\ SOXPELQJ VHOHFWLRQ WKDW LV VWLOO VHFRQG WR QRQH
7(&+ /,1( ZZZ HDUOVSOXPELQJ FRP
They rock...and they sometimes roll. They run on pavement, they run on dirt. Some sport huge wings, others have none. Many run throbbing eight cylinder engines, but a fair number also rely upon four cylinder power. They are the Open Wheel race cars known as Winged and Non-Winged Sprint Cars, Silver Crown Cars, Super Modifieds, Midgets, and Mini Sprints. Fuel injected engines run on alcohol for maximum horsepower, and are guaranteed to bring the fans in the stands to their feet, lap after exciting lap. Machines like these need highly specialized parts and equipment. We stock these items in abundance, right here on our shelves. This catalog highlights components that are especially tailored to the needs of every dedicated open wheel racer. Between these covers you'll find the quality, variety and diversity of parts needed to put any open wheel car in the winner's circle.
Jim Fisher Image • Butler (MI) Speedway
2010
001-016OW10.indd 1
1
11/10/09 8:23:59 AM
MANUFACTURERS INDEX A-1 ...................................................................35-36 Aeroquip Performance Products.....................37-45 Aeromotive ............................................................45 AFCO Racing Products ..........................................46 Akery And Childs ............................................47 Alinabal..................................................................47 Allstar Performance .................. 3-34, 103, 206, 213 Argo Manufacturing Co. .................................47 ARP ..................................................................50-51 ATL ..................................................................47 Aurora Bearing Company ......................................48 Auto Meter.......................................................49-50 Autolite ..................................................................47 Awesome Racewear .............................................52 Barnes Dry Sump Oil Systems ..............................53 Battery Tender ................................................53 Bell Racing ......................................................54-55 Benic Racing Shocks......................................56 Bilstein ..................................................... 57-58 Braille Battery .......................................................58 Brad Penn .......................................................60 Brodix Cylinder Heads ...........................................59 Brunnhoelzl Racing ...............................................60 Butler Built ............................................................61 C-Line Engineering................................................72 C&R Racing ...........................................................64 Canton Racing Products..................................62-63 Carrillo ...................................................................63 Champ Pans ..........................................................64 Champion ..............................................................66 Clear One ........................................................65 Clevite....................................................................66 Cloyes .............................................................67 Coleman Racing Products .....................................71 Cometic Gasket .....................................................66 Comp Cams .....................................................68-70 Computech Systems .............................................67 Conroy “Pneu” Control ...................................72 Cool Shirt ........................................................71 Crane Cams .....................................................60-61 Crower ............................................................71 Cyclo ......................................................................66 Dart Heads.............................................................73 Del West ................................................................74 Denso..............................................................73 Diamond Racing Products..............................75 Diversified Machine, Inc. ..........................76-79,154 Dominator Race Products ......................75, 153 Dupli•Color .....................................................80 Dura-Bond ......................................................75 Dyer's .............................................................73 Eagle Specialty Products ......................................80 Earl’s Performance Plumbing .........................81-86 Eibach Springs ......................................................87 Fel-Pro Performance Gaskets ...............................88 Ferrea Valves ..................................................89 Firebottle ........................................................89 FSR ........................................................................87 Flaming River ........................................................87 Flatout Gaskets ..............................................89 Flo-Fast ..........................................................92 FK Rods Ends..................................................91 Fragola ..................................................... 90-91 Fram Filters ...........................................................92 Fuel Safe Racing Cells ..........................................92 G-Force Racing Gear .......................................93-94 GME .......................................................................95 Griffin Thermal Products .......................................95 H3R Performance ...........................................95
2
Hastings Racing Rings ...................................97 Hawk Performance ...............................................98 Hepfner Racing Products ................................96-97 Holley.....................................................................98 Hot Products Engineering .....................................99 Howards Cams ......................................................99 Hilborn Fuel Injection ............................................99 Hutchens Device .................................................100 Hypercoils............................................................100 Ideal Heated Knives ............................................103 Impact Racing .............................................101-103 Intercomp ....................................................104-105 Isky ..............................................................105-106 Jaz Products........................................................107 JE Pistons .....................................................107 Joe Gibbs Racing Oil ...........................................108 Joe's Racing Products ........................................109 K1 Technologies ...........................................110 K-Motion .......................................................110 K&N .....................................................................111 Kendall .........................................................114 King Engine Bearings ...................................112 Kinsler Fuel Injection...........................................112 Kirkey Racing Fabrication ...........................113-114 KSE Racing Products...........................................115 Kwik Change Products ........................................114 Longacre .....................................................116-119 LSM Racing Products ..........................................119 Lucas Oil Products Inc.........................................120 Lunati ...........................................................121 M&W Aluminum Products ...................................122 Mahle Motorsports .......................................121 MagnaFuel ....................................................123 Mallory Ignition ...................................................123 Manley .................................................. 123-124 Mechanix Wear....................................................125 MetTec .................................................................126 Micro Temp ...................................................126 Moroso ........................................................127-132 MPD Racing .................................................134-136 MSD Ignition ................................................132-133 Motive Products ..................................................136 Mr. Gasket ...................................................137-139 Mudd Off (Energy Release) .................................139 NGK Spark Plugs .................................................139 Norstar Instant Canopy .......................................140 Oliver Racing Parts..............................................140 Outerwears Pre-Filters........................................141 Paulson Bubble Goggle .......................................142 Percy's..........................................................142 Perfect Circle Performance ..........................142 Performance Friction Brakes ..............................143 Permatex .............................................................144 Pete Jackson ................................................147 Peterson Fluid Systems ..............................145-147 Pioneer Inc...........................................................147 Pit Pal Products ...........................................148-149 PJ1 ......................................................................141 Powerhouse ........................................................150 Pressure, Inc. .......................................................143 Proform ...............................................................152 Pro Blend Motorsports Products .........................151 Pro Gram.......................................................156 Pro/Cam...............................................................150 Pro Shocks ..................................................153-155 Pro Tru .................................................................156 QA1 Motorsports .........................................157-158 Quarter Master ....................................................159 QuickCar Racing Products ..........................160-161
RaceBolt ..............................................................162 Raceceiver...........................................................162 Race Cover-Alls ...................................................162 RaceQuip SafeQuip .....................................163-164 RJS Racing Equipment, Inc. ................................171 Racing Electronics ..............................................165 Racing Optics ......................................................166 Rapco Racing ...............................................167 Reb-Co Performance Products ...........................167 Red Line Oil .........................................................167 Reese...................................................................168 Ringers Gloves ....................................................169 Robic ...................................................................166 Royal Purple Synthetic Motor Oil ........................172 Russell .........................................................173-174 Saldana Racing Products ....................................175 Sander Engineering.....................................176-177 Scat .....................................................................178 Scribner Engineering ..........................................175 Schoenfeld Headers ............................................181 Schroeder Torsion Bars ................................186 SRP Pistons .........................................................178 SCE ......................................................................179 SCS ......................................................................180 Seals-It ................................................................182 Simpson ......................................................183-186 Sparco .................................................................187 Speed Pro .....................................................188 Stage 8 Locking Fasteners .................................189 Standard Abrasives .............................................187 Stef's ............................................................189 Steve Smith Autosports.......................................181 Stewart Warner Performance .............................189 Supertrapp ...................................................190 Suspension Spring Specialists ...........................179 Sweet Manufacturing..........................................190 Swift Springs................................................186 System One Filter System...................................191 T&D Machine Products .......................................191 Tanner Racing Products ......................................192 Taylor/Vertex ...............................................193-194 Thermo-Tec .........................................................195 Tilton....................................................................196 Tel Tac..................................................................192 Torco Racing Oils.................................................197 Total Seal .............................................................198 TripleX Race Co ...........................................199-204 US Brake .......................................................204 Ultra-Shield Race Products .................................195 Valco ....................................................................205 Valvoline ..............................................................206 VHT ......................................................................207 King Racing Products (VMAC Racing Products) .............................208-212 VTAC Racing Products .........................................212 Waterman Racing Components ....................213 Weld Racing ........................................................214 Wilwood Disc Brakes ..................................215-219 Winters Performance Products ...................220-224 Wiseco Piston ......................................................219 Wix Filters............................................................219 Woody Wires .................................................219 World Products .............................................225 XRP ..............................................................225-228 Spark Plug Heat Range/Cross Reference ...........229 PARTS LISTED IN BLUE REPRESENT NEW SUPPLIERS
2010
001-016OW10.indd 2
11/10/09 8:24:06 AM
NEW PRODUCTS Tire Tool ALL10550 - PAGE 12
Aluminum Steering Mounts ALL52115-52117- PAGE 22
Sprint Wash Plug Set
Fuel Pressure Gauge
ALL26032-26038 PAGE 10
ALL40330 - PAGE 27
Radiator Honeycomb
Aluminum Front Torsion Arms
ALL30158 - PAGE 26
ALL55000-55005 - PAGE 22
Heel Riser ALL54090-PAGE 20
Aluminum Rear Torsion Arms ALL55010-55012 - Page 22
MSD Box Mount ALL81330-PAGE 32
Aluminum Torsion Stop ALL55020 - Page 22
Brake Caliper Bolt Retainer Kit
Aluminum Pitman Arms
ALL42050 - PAGE 28
ALL55030-55032 - Page 22
ALL50210
ALL50211
Aluminum Brake Line Quick Disconnects
Aluminum Steering Arms
ALL50210 - ALL50211 PAGE 30
ALL55060-55062 - Page 22
Steel Brake Line Quick Disconnect Kit
Aluminum Birdcages
ALL50215 - PAGE 30
ALL55040-55042 - Page 22
Aluminum Brake Mounts Torsion Arm Stop Kit ALL10730 - PAGE 22
ALL55070-55072 - Page 22 2010
001-016OW10.indd 3
3
11/10/09 8:24:06 AM
TOOLS & ACCESSORIES Punch And Flare Tools NEW!
Bolt Extractor Kit ALL11050
Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time.
A power driven drill bit and an extractor in one tool. Use with a 3/8" variable speed reversible power drill to extract broken, rusted or stubborn bolts. No grinding or center punch required. Self centering tips work on jagged, uneven breaks. Four piece kit includes 1/4" (M6), 5/16" (M8), 3/8" (M10) and 1/2" (M12) bits.
Part No
Diameter
ALL11070 ..........1-1/2" ALL11072 ..........1-3/4" ALL11074 ..........2" ALL11076 ..........2-5/8" Sample Punch
Metal Snips
Left Cut
Durable tin snips have offset blades to keep hands clear of metal while cutting. Non-slip jaws cut through sheet aluminum and up to 18 gauge low carbon steel. Blade length 1-1/4", total tool length 9-1/4". Part No.
Fine Thread Taps Tungsten steel taps are titanium coated for long life. Taps are available in right-hand and left-hand threads. Part No.
Description
ALL11064 ..........1/2"-20 RH ALL11065 ..........1/2"-20 LH ALL11066 ..........5/8"-18 RH ALL11067 ..........5/8"-18 LH ALL11068 ..........3/4"-16 RH ALL11069 ..........3/4"-16 LH
Description
ALL11030 ..........Red, Left Hand ALL11031 ..........Green, Right Hand
Thread Files Right Cut
Deburring Tool ALL11036 A fast and easy way to remove burrs from the edges of machined or cut metals. Five piece kit includes handle, telescopic blade holder and three unique blades. Handle has built-in storage for blades. Blade holder adjusts from 1" to 5".
3/16" Double Ended Drill Bits ALL18204
Remove burrs from damaged or rusted external threads on bolts, spindles, axle tubes, threaded shaft, pipe, and pipe fittings. Choose from three different files, each 8-1/2" long. Standard and metric sizes. Part No.
Description
ALL11037 ..........11-12, 13-14, 16-18, 20-24TPI ALL11038 ..........9-10, 12-16, 20-27, 28-32TPI ALL11039 ..........0.75-100, 1.25-1.50. 1.75-2.00, 2.50-3.00mm
Hand Rivet Gun ALL18206 Includes interchangeable nosepieces for 3/32", 1/8", 5/32", and 3/16" dia. rivets.
A must for every racer’s toolbox. Package of 6.
Drill Bits For Flange Rivets 13/64" ALL18203 A common size bit for working with 3/16" flange type rivets. High speed steel bits have black oxide finishes and self centering tips. Flute length: 1-3/16", overall length: 2-1/4". Package of 2.
Step Drill Set ALL11040 Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact, deburr and chamfer while drilling and do not require a center punch. Titanium nitride coated high speed steel. 1/4" hex shank. Set includes one 3/16"-1/2", one 1/4"-3/4" and one 1/8"-1/2" drills.
4
Deluxe Hand Rivet Gun ALL18208 Deluxe rivet tool includes nosepieces for 3/32", 1/8", 5/32", and 3/16" rivets. Wrench stores inside handle for quick nosepiece changes.
Air Rivet Gun ALL18207 Heavy duty, for use with steel or aluminum rivets from 3/32" to 3/16".
Rivet Gun For Cordless Drill ALL18205 An adapter for cordless drills, the Rivet Gun speeds up installation of “blind” rivets (for race car bodies). A real hand and time saver. Includes nosepieces for 3/32", 1/8", 5/32" and 3/16" rivets.
2010
001-016OW10.indd 4
11/10/09 8:26:15 AM
TOOLS & ACCESSORIES Safety Wire Twister Pliers ALL10120
Towels
Never lose another race because of loose bolts. Rugged pliers have an end bearing for smoother, faster twisting, especially in tight areas where a second pull is needed.
Soft, absorbent terry cloth towels can be used for polishing, wiping up spills or general detailing. Shop towels belong with every tool box as well as in the shop, garage or trailer. Part No.
Description
ALL12010 ..........Red Shop Towels, 25-Pack ALL12012 ..........White Terry Towels, 12-Pack
Safety Wire ALL10121 Stainless steel wire is .032" dia., 1 lb. spool.
Safety Wire Drill Fixture ALL10122 NEW! Accurately drill holes in fasteners allowing them to be mechanically locked in place with safety wire. Fixture accommodates 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" fasteners. Guide bolt tightens against fastener, holding it secure for drilling.
Quick Turn Fastener Wrench ALL19400 The quick turn fastener wrench fits slot head fasteners and reduces the risk of body or fastener damage from using screwdrivers for loosening or tightening. Non-slip hand grip.
Braided Hose Cutter ALL11000 Tired of the jagged edges left after cutting braided line with a hacksaw? Heavy-duty hose cutter makes clean, snag-free cuts every time.
Replacement Blades ALL11002
Reusable Corded Earplugs ALL12000 Corded earplugs fit instantly without rolling or squeezing. Made of a soft material that cleans up easily in warm, soapy water.
Safety Glasses ALL10258 Comfortable, lightweight, general purpose safety glasses have a clear wrap around lens for maximum visibility. ANSI-Z87.1 rated.
Stopwatch ALL10114 Time laps and intervals to keep track of the competition.
Tie Wraps Secure electrical wiring, gauge lines and roll bar padding. 100 per bag. Available in black, natural, red, blue, yellow and purple nylon. Part No.
Length
Black Nylon ALL14120 3-3/4" ALL14122 6" ALL14123 7-1/4 " ALL14124 11-1/4" ALL14125 14-1/4" Natural Nylon ALL14130 3-3/4" ALL14132 6" ALL14133 7-1/4" ALL14134 11-1/4" ALL14135 14-1/4"
Part No.
Length
Red Nylon ALL14126 7-1/4" ALL14127 14-1/4" Blue Nylon ALL14128 7-1/4" ALL14129 14-1/4" Yellow Nylon ALL14136 7-1/4" ALL14137 14-1/4" Purple Nylon ALL14138 7-1/4" ALL14139 14-1/4"
Heavy Duty Tie Downs, Straps And D-Rings Part No.
Description
ALL10184 .... 2" x 8', Tie Down (Flat Hook) ALL10188 .... 2" x 8', Tie Down (Direct Hook) Twist Hook Flat Hook ALL10192 .... 2" x 8', Tie Down (Twist Hook) ALL10196 .... 2" x 8', Tie Down With Built-in Axle Strap (Twist Hook) ALL10200 .... 2" Wide Axle Tie Back Strap, 48" C/L To C/L Of Hooks, Adj. 24"-40" ALL10204 .... 21" Long Axle Strap Direct Hook ALL10208 .... 33" Long Axle Strap ALL10210 .... Heavy Duty Recessed D-Ring ALL10184
ALL10188
Deluxe Aluminum Mud Scraper ALL44165 Remove the stickiest mud and clay without damaging paint or decals. Lightweight and 32" long to reach wings, deck lids and undercarriage. Use the convenient hole in end to hang scraper.
Radiator Fin Tool Kit ALL10680 NEW! Hand held tool straightens and repairs damaged fins in most radiators, coolers, and air conditioning condensers. Repairing damaged fins provides better airflow through core increasing cooling ability. Six interchangeable heads 13, 15, 16, 17, 18 and 20 fins per inch.
ALL10192
ALL10196
ALL10200
ALL10204 ALL10208
2010
001-016OW10.indd 5
5
11/12/09 4:48:41 PM
TOOLS & ACCESSORIES Race Car Tie Down Package ALL10209 Axle Combo Ratchet Straps
Axle Tie Back Straps
Includes two ALL10196 axle combo ratchet straps and two ALL10200 axle tie back straps. Enough tie downs to secure a car to any trailer.
Ratchet Binder ALL10180 Secure extra equipment in the trailer with this 1" wide, 8 Ft. long binder made of heavy duty nylon webbing. Easy, onehand operation. Rated at 1,200 lbs.
Recessed D-Ring ALL10210 Heavy duty recessed D-Ring.
Racer’s Tape A hundred uses in the shop or at the track. True “Racer’s Tape”.
Part No.
Description
1" x 90 Ft ALL14140 ........ Silver ALL14141 ........ Black
Gaffer’s Tape Vinyl coated gaffer’s tape has a dull appearance and is much stronger than standard racer tape. Part No.
Description
3" x 180 Ft ALL14142 ........ White ALL14143 ........ Black
Part No.
Description
2" Wide x 45' ALL14145 ........ Fluorescent Green ALL14146 ........ Fluorescent Pink ALL14147 ........ Fluorescent Orange ALL14148 ........ Fluorescent Yellow
Black And White Checkered Tape ALL14149 Checkered tape has many uses such as signs, displays, racecars, trailers, etc. Rolls are 2" wide and 45' long.
Surface Guard Tape Clear protective polyurethane tape can be applied directly over painted surfaces or decals to help prevent scratching, chipping or other damage. Use on wheel well openings, rocker panels, headlight decals, door edges or anywhere added protection may be required. Tape is 8 mil thick and provides excellent resistance to ultra violet light. Will not yellow over time. Part No.
Part No.
Description
2" Wide x 180' ALL14251 .......... White ALL14252 .......... Red ALL14253 .......... Black ALL14254 .......... Yellow ALL14255 .......... Navy Blue 4" Wide x 180' ALL14261 .......... White ALL14263 .......... Black
Description
ALL14275 ................. 2" x 30' ALL14276 ................. 3" x 30' ALL14277 ................. 4" x 30'
Electrical Tape ALL14280 Part No.
Description
2" x 180 Ft ALL14150 ........ Silver ALL14151 ........ White ALL14152 ........ Red ALL14153 ........ Black ALL14154 ........ Yellow ALL14155 ........ Blue ALL14156 ........ Orange ALL14157 ........ Green ALL14158 ........ Burgundy ALL14159 ........ Purple ALL14162 ........ Teal
Non-Skid Tape ALL14165 Heavy duty, non-skid tape is long lasting and may be used in the race car, shop or trailer. Tape will handle temperatures up to 220°F, 4" x 10' roll.
6
Protect electrical connections and secure wires. 3/4" x 60 ft. roll.
Teflon Thread Tape ALL14282 Tape seals threads on pipe connections. 1/2" x 21 ft. roll.
Tape Gun ALL14163 Use with shipping tape.
Shipping Tape Seal shipping boxes and boxes of spare parts. Part No.
Description
ALL14160 ..........Clear 2" x 330 Ft. Roll ALL14161 ..........Tan 2" x 330 Ft. Roll
2010
001-016OW10.indd 6
11/10/09 8:28:14 AM
TOOLS & ACCESSORIES Heavy Duty Engine Stands
Fire Extinguishers Hand held dry chemical fire extinguishers are perfect for race car, trailer or garage use and each includes steel mounting bracket and strap, aluminum nozzle and hairpin safety pin. ABC rated, effective against electrical, liquid, grease, wood or paper fires. ALL10502 includes a ALL10500 ALL10501 hook type mounting bracket to hang extinguisher on shop or trailer wall.
ALL10176
ALL10175
Part No.
ALL10502
Description
ALL10500 ..........2-1/2 Lb., Red ALL10501 ..........2-1/2 Lb., Chrome ALL10502 ..........5 Lb., Red Choice of ALL10175 with an I-shaped base with support through the center, or ALL10176 with a U-shaped base and an open center area. Both stands include heavy duty casters, 360° rotating head assembly and sliding handle. Part No.
Max. Capacity
Length
Width
Height
Weight
ALL10175 ALL10176
1000 lbs. 1250 lbs.
32" 32"
30" 30"
30" 32"
52 lbs. 59 lbs.
Economy Engine Cradle ALL10171 Small block/big block Chevy cradle is made from 1" square tubing and powder coated black. No provisions for wheels.
Does Not Accept Wheel Kits
Engine cradles are available in Standard Duty or Heavy Duty, both with provisions for mounting wheels. Made of 1" square tubing with black powder coating. Stands include Grade 5 fasteners and may be easily disassembled for storage. Standard Duty cradles accept wheel kits with 3/8" studs. Heavy Duty cradles accept wheel kits with 1/2" studs. Wheel kits must be purchased separately. Description
Standard Duty Cradles ALL10130 ..........SB and BB Chevy ALL10145* ........SB Ford Accepts Bolt-On ALL10150 ..........SB Mopar Wheel Kits Heavy Duty Cradles ALL10132 ..........SB and BB Chevy ALL10148 ..........SB Ford ALL10152 ..........SB Mopar *This is a new version designed to work with most aftermarket blocks including Dart, World, and Ford Boss blocks with ribbed engine mount bosses and bulged water jackets. Will also work with stock blocks.
Cradle Wheel Kits Hard rubber wheel kits may be mounted to Allstar engine cradles ALL10130 thru ALL10156. Kits are also available with locking wheels, ideal for storing spare engines in trailer. Standard duty kits feature 3/8" studs and heavy duty models use 1/2" studs. Four wheels per kit. Part No.
Description
ALL10162 ..........Std. Duty 3" Dia. Kit ALL10163 ..........Std. Duty 3" Dia. With Locking Kit ALL10164 ..........Heavy Duty 3" Dia. Kit ALL10165 ..........Heavy Duty 3" Dia. With Locking Kit ALL10166 ..........Heavy Duty 5" Dia. Kit
Measure inside, outside and depth dimensions with easy to read Metric or SAE LCD display, in .001" increments up to 6". On/Off switch conserves battery and zero setting assures accurate readings. Plastic case provides additional battery storage.
Dial Caliper ALL96410
Engine Cradles
Part No.
Digital Calipers 0-6" With Case ALL96411
ALL10162
Quality hardened stainless steel dial caliper is shockproof and capable of measuring items from .001" to 6" in increments of .001". Includes protective carrying case.
Dial Indicator With Magnetic Base ALL96414 Dial indicator with magnetic base is ideal for degreeing cams, checking crank end play, deck heights, dome heights, transmission end play or ring and pinion backlash. Universal magnetic base may be mounted anywhere. Shockproof dial indicator has 1" of travel in .001" increments. Base and dial indicator may also be purchased separately. Part No.
Description
ALL96415 ..........Dial Indicator Only ALL96416 ..........Magnetic Base Only
Smart Tool ALL10113 Ensure that tubing is level and plumb. Check driveshaft angles, and use for trailing arms and suspension with ALL10740 Smart Level Tray. “Hold” button freezes and unfreezes readings, shown in degrees, percentages, or in./ft. Plus and minus signs indicate pitch is more or less than shown. Pitch reads in 1/8 in./ft. steps. Listen and level emits an audible “beep”. The tool shuts off automatically after six minutes. Powered by a standard 9 volt battery.
Smart Tool Level Tray ALL10740 NEW! Aluminum tray is a nice addition when using Smart Tool on trailing arms or suspension tubes. Plastic clips allow tray to snap to tube when in tight areas. A bubble level helps provide accurate readings.
2010
001-016OW10.indd 7
7
11/10/09 8:28:57 AM
TOOLS & ACCESSORIES Round Tubing Notchers
Feeler Gauges
Notchers render precise joints for more consistent welds and stronger cages. Available in deluxe aluminum or economy steel versions, notchers accept up to 2" diameter stock and automatically align and center tubing. Use in drill press or with hand drill. Notchers adjust up to 45°.
Use in engine assembly to check connecting rod side clearance, piston ring end gap, spark plug gap and valve lash. Gauges have Metric and SAE sizing designations etched in each blade. Choose straight or angled sets.
Part No.
Description
Part No. ALL10410
ALL10400
ALL10400 ................. Deluxe Notcher ALL10410 ................. Economy Notcher ALL10402 Replacement Parts ALL10402 ................. 5/8"-18 Thread Adapter ALL10403 ................. Arbor Support Bushings (Pair) ALL10403 ALL10404 ................. Arbor With 1/2"-20 Thread Optional Parts ALL10406 ALL10405 ................. Arbor With 5/8"-18 Thread ALL10406 ................. Drill Press Mount (ALL10410 Only) ALL10407 ALL10407 ................. Arbor Support With Needle Bearings Note: Tubing notchers include 1/2"-20 arbor thread and 5/8"-18 adapter. Hole saws up to 1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"-18 thread.
Hole Saw Set ALL10412 Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4", 1", 1-1/8", 1-1/4", 1-1/2" 1-5/8" and 1-3/4". Individual Hole Saws Part No.
Size
ALL10413 ................. 3/4" ALL10414 ................. 1" ALL10415 ................. 1-1/8" ALL10416 ................. 1-1/4" ALL10417 ................. 1-1/2" ALL10418 ................. 1-5/8" ALL10419 ................. 1-3/4" Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread.
Round Tubing Bender Portable bender’s welded steel frame has a hand-operated, 8-ton hydraulic jack. Cast aluminum shoes are available with either a 7" radius for 1-1/2", 1-5/8" and 1-3/4" round tubing or a 5" radius for 1" and 1-1/4" round tubing. Easily converts by changing shoe and roller. Total weight is only 42 lbs. Bend up to .134" wall thickness mild steel tubing or .120" wall thickness chrome moly tubing. Part No.
Description
ALL10300 ..........1-3/4" x 7" Radius Bender ALL10310 ..........1-5/8" x 7" Radius Bender ALL10320 ..........1-1/2" x 7" Radius Bender ALL10330 ..........1-1/4" x 5" Radius Bender ALL10340 ..........1" x 5" Radius Bender Replacement Parts ALL10305 ..........1-3/4" x 7" Radius Die Shoe and Roller ALL10315 ..........1-5/8" x 7" Radius Die Shoe and Roller ALL10325 ..........1-1/2" x 7" Radius Die Shoe and Roller ALL10335 ..........1-1/4" x 5" Radius Die Shoe and Roller ALL10345 ..........1" x 5" Radius Die Shoe and Roller ALL10390 ..........Jack For Tubing Benders ALL10391 ..........Jack Handle ALL10392 .........Lower Roller Shaft Note: Die shoe should be well lubricated, when using tubing .095" and thinner, to prevent kinking. Bender should not be used with tubing beyond a .134" wall thickness.
8
Description
ALL96420 ..........Straight ALL96421 ..........Angled
Valve Lash Wrenches Allstar Valve Lash Wrenches save precious time and eliminate fumbling with two separate wrenches. Available for Jesel, T&D and other poly-lock style rocker assemblies. Part No.
Description
ALL96400 ..........7/16" Box Wrench, 1/8" Allen Wrench, Jesel Assemblies ALL96405 ..........7/16" Box Wrench, 5/32" Allen Wrench, Jesel Assemblies ALL96401 ..........1/2" Box Wrench, 3/16" Allen Wrench, T&D Assemblies ALL96402 ..........9/16" Box Wrench, 3/16" And 7/32" Allen Wrenches, Stud Girdle Assemblies ALL96403 ..........5/8" Box Wrench, 3/16" And 7/32" Allen Wrenches, Poly Lock
Telescoping Magnet ALL14173 A strong (3 pound pull), telescoping magnet that will retrieve dropped tools or fasteners. Tool extends over 2 feet, and retracts to just 5" to fit in a shirt pocket.
Telescoping Mirror ALL14174 A 1-1/4" multi-positional, telescoping mirror for inspecting hardto-see areas or locating engine oil leaks. Mirror is 6-1/2" long and extends to over 19".
Freeze Plug Driver Set ALL96482 Have problems installing freeze plugs? Use these plastic drivers for simple installation without damaging the plugs or the block. Three sizes per set: 1-1/2", 1-5/8", 1-3/4". Individual Drivers Part No.
Description
ALL96483 ................. 1-1/2" Driver ALL96484 ................. 1-5/8" Driver ALL96485 ................. 1-3/4" Driver
ALL96483
ALL96484
ALL96485
Cam Bearing Installation Tool ALL96470 For installing cam bearings quickly and easily without damage. Shaft is steel; pilot and driver are aluminum.
2010
001-016OW10.indd 8
11/10/09 8:29:27 AM
TOOLS & ACCESSORIES Power Ring Filer ALL96500
Internal Thread Chaser
Speeds up normally time-consuming task of piston ring filing. Portable ring filer uses a 12 volt rechargeable NiCad battery pack and cuts piston rings to the desired gap. When fully charged, filer may be used for up to eight hours. Sold with three grinding wheels, a ring de-burring file, tool kit, recharger and carrying case. Replacement Parts
Insert tool past damaged threads, expand and, using undamaged threads as a guide, twist back out to restore damaged threads. The 14mm tool is perfect for repair of damaged spark plug threads without removing cylinder head.
Part No.
Compression Tester ALL96520
Description
ALL96501 ..........60 Grit Grinding Wheel ALL96502 ..........Ring De-burring File ALL96503 ..........Replacement Battery Pack
“Lockbuster” Spiral Lock Removal Tool Allstar “Lockbuster” quickly and easily removes spiral locks from full floating pistons without damaging wrist pin holes or lock ring grooves. Head is made of quality steel. “Lockbuster” Spiral Locks are completely redesigned and require no modifications for use with the “Lockbuster” tool. Part No.
Description
ALL96450 ..........“Lockbuster” With .927" Head ALL96451 ..........“Lockbuster” With .990" Head ALL96455 ..........“Lockbuster” Spiral Locks, .927" x .042", 4-Pack ALL96456 ..........“Lockbuster” Spiral Locks, .990" x .042", 4-Pack ALL96457 ..........“Lockbuster” Spiral Locks, .927" x .042", 32-Pack ALL96458 ..........“Lockbuster” Spiral Locks, .990" x .042", 32-Pack
Part No.
Description
ALL96434 ..........14mm ALL96438 ..........18mm
Tester checks cylinder compression from 0 to 300 PSI and features an air-hold valve to reset gauge. Two brass fittings with O-rings are included for 14mm and 18mm spark plug threads. Easy to read 2-1/2" dial is encased in a metal housing with a 12" flexible hose attached.
Pistol Grip Grease Gun ALL14300 Quality gun has comfort grip handle for easy, one hand operation. Gun accepts a standard 14 oz. grease cartridge, features an air bleeder valve to eliminate air lock, and includes a flexible 12" long fill hose.
Rod Guide Tool ALL96480 Plastic tool slips over 3/8" or 7/16" rod bolts to aid piston installation and eliminate the chance of rod bolts hitting crank. A must for any engine builder’s toolbox. Part No.
Description
ALL96481 ..........Rod Guide Tool Extensions 4.5", 1-Pair
Grease Gun Tips Tips reach to grease fittings in tight areas, such as U-joints, and may also be used to grease the ball spline unit on Bert transmissions. The 2" tip replaces the standard end on most guns with 1/8" NPT. Quick release 4" tip includes a small and large sleeve to fit standard couplers. Tips are for hand operated grease guns only. Part No.
Valve Spring Compressor ALL96490 Adjustable C-clamp style compressor will fit most heads including Hemi. Spring cup will fit stock springs up to 1.750" diameter and a “working window” to gain access to keepers that measures 1.100", which is too large for some small diameter spring/ retainer combinations. Compressor has 9/16" hex for use with a wrench, ratchet or impact. This tool will handle spring pressures in excess of 1200 lbs. without slipping off.
Spark Plug Indexing Tool ALL96510
Description
ALL14305 ..........2" Grease Gun Tip ALL14306 ..........4" Grease Gun Tip
ALL14305 ALL14306
Tubing Cutters Cut plastic, aluminum, copper or steel tubing without distorting or crushing. ALL11011 Standard cutter works ALL11010 with tubing from 1/8" up to 1-1/8" and has wide rollers for even tracking of cutter wheel, built in reamer for cleaning inside of tubing and an extra cutting wheel. Mini cutter can cut tubing from 1/8" to 5/8" in tight areas. Part No.
Description
ALL11010 ..........Mini ALL11011 ..........Standard
Double Flare Tool ALL11015 Indexing positions the ground strap of the spark plug properly for best piston dome clearance and unshrouds the electrode for a more even burn and possible gains of 5-15 horsepower. Works with flat gasket or taper seat 14mm spark plugs. Includes instructions.
Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45 degrees, the most common flare used in custom brake and fuel lines. Includes detailed instructions and a convenient plastic storage case.
2010
001-016OW10.indd 9
9
11/10/09 8:30:01 AM
TOOLS & ACCESSORIES Swivel Head Brake Pressure Gauge ALL11020
Sprint Wash Plug Set Aluminum plugs have O-rings for a water tight seal and will keep dirt out of injectors while cleaning sprint car. 4-piece set includes a nylon storage pouch.
Gauge replaces the bleeder screw in most aftermarket brake calipers and measures brake pressure. Swivel head positions the gauge for easy viewing. Part No.
Description
ALL11022 ..........Adapter To Use Brake Pressure Gauge With GM Metric Calipers
Part No.
Plug Diameter
ALL26032 ..........2.4375" ALL26033 ..........2.50" ALL26035 ..........2.8125" ALL26036 ..........2.90" ALL26038 ..........3.00"
ALL11022
Funnels
Sprint Fuel Pressure Gauge ALL40330 NEW! ALL40109
ALL40100
ALL40102
ALL40104
ALL40106
Heavy duty plastic funnels are perfect for topping off fuel or other liquids. Available in several sizes. Part No.
Fuel pressure indicator gauge allows preadjustment of the high speed, secondary and main valve opening pressures using a compressed air source. Gauge can be mounted directly to the wall or tool box. 4-1/2" diameter dial has a 0-160 PSI range.
Cap And Plug Kits
Description
ALL40100 ..........6 Qt. Funnel With Brass Screen, Most Common Fuel Funnel ALL40102 ..........2 Qt. Funnel With Brass Screen ALL40104 ..........1 Pint Funnel With Brass Screen ALL40106 ..........4 Oz. Mini Funnels, Sold In Pairs (One With And One Without Screen) ALL40109 ..........Funnel Fill Adapter (Reduces Outlet Size) Kits include 5 of each size, -3 to -16.
Extended Funnels
Part No.
Part No.
Description
ALL40107
Description
ALL50800 ..........Plastic Cap Kit ALL50810 ..........Plastic Plug Kit ALL50820 ..........Aluminum Cap Kit ALL50830 ..........Aluminum Plug Kit
Funnels with extensions work great for filling fluids in hard to reach areas. Standard funnel is useful for power steering, and automatic transmissions. Funnel with flexible extension is ideal for differentials and manual transmissions. Built in hang tab allows funnel to be secured to body or frame for hands free filling.
Caps And Plugs ALL40108
ALL40107 ..........1 Pint Funnel With Flexible Extension ALL40108 ..........1 Pint Extended Funnel
A must for keeping debris out of lines and hoses on dry sump pumps, fuel pumps, pressure regulators, etc. Caps and plugs fit 37째 flared fittings and straight threaded ports. Available in plastic and aluminum.
Plastic Drum Pump ALL40114 NEW! Hand siphon drum pump dispenses or transfers low viscosity fluids from a 55-gallon drum. Self priming bulb delivers up to 5 gallons per minute.
ALL50801 Cap Part No.
Mini Quick Fill Can ALL10098 Molded plastic, 2-1/2 gallon mini quick-fill can will conveniently fill important pit equipment including generators, golf carts, minibikes, etc. Can is 26" tall.
10
ALL50811 Plug Part No.
Plastic Caps And Plugs ALL50801 ALL50811 ALL50802 ALL50812 ALL50803 ALL50813 ALL50804 ALL50814 ALL50805 ALL50815 ALL50806 ALL50816 ALL50807 ALL50817 Aluminum Caps And Plugs ALL50821 ALL50831 ALL50822 ALL50832 ALL50823 ALL50833 ALL50824 ALL50834 ALL50825 ALL50835 ALL50826 ALL50836 ALL50827 ALL50837
ALL50821
ALL50831
AN Size
Thread Size
No. Per Pkg.
-3 -4 -6 -8 -10 -12 -16
3/8"-24 7/16"-20 9/16"-18 3/4"-16 7/8"-14 1-1/16"-12 1-5/16"-12
20 20 20 20 10 10 10
-3 -4 -6 -8 -10 -12 -16
3/8"-24 7/16"-20 9/16"-18 3/4"-16 7/8"-14 1-1/16"-12 1-5/16"-12
20 20 20 20 10 10 10
2010
001-016OW10.indd 10
11/10/09 8:30:32 AM
TOOLS & ACCESSORIES Torsion Bar Plug Kit ALL50852 Tapered red plastic plugs provide a snug fit yet can be easily removed from torsion bars. Package of ten.
Track Mats Mats fold for easy storage and are ideal for use on asphalt, dirt, in the pits or on the garage floor. Vinyl covered pad measures 51" x 24" unfolded, 12" x 24" folded.
Steel -12 Wrench ALL11180 Twelve point wrench has a rubber hand grip and is a must for tightening -12AN hose ends on a dry sump pump in seconds.
Part No.
Description
ALL10126 ..........Black ALL10127 ..........Red ALL10128 ..........Blue ALL10127 - Folded
Aluminum Adjustable Wrenches Eliminate the guesswork of which wrench is needed to tighten, remove or check steel braided hose fittings. Aluminum wrenches prevent damage to fitting and are available in two sizes: 8" for fittings up to a -10, and 10" for fittings up to -20. Part No.
Steel tire prep stand is a must when grooving, siping, grinding or even cleaning tires. Bolts together, and the pivoting head eases initial tire mount. A locking T-handle, secures the head assembly. Can be used with 5x5 or Wide 5 wheels.
Size
ALL11152 ..........8" ALL11153 ..........10"
Tire Prep Mount ALL10561
Aluminum Wrench Set ALL11100 Five piece, aluminum wrench set for use with aluminum AN-style, braided hose fittings manufactured by Aeroquip, Earl’s, etc. Sizes included are -6, -8, -10, -12, and -16. Each wrench is finished in different color anodizing for easy identification. Also sold individually. Individual Wrenches Part No.
Tire Prep Stand ALL10555
Size
Part No.
Manual steel tire prep mount eases grooving, siping, grinding or even cleaning tires. Special one-way bearings prevent “roll back” when grooving or siping. Bolt to a wall stud or other solid surface. Can be used with 5x5 or Wide 5 wheels. ALL10562 wall swivel (sold separately) allows use at various angles. Part No.
Description
ALL10562 ..........Swivel Wall Mount Bracket
Size
ALL11106 ...... -6 ALL11112 ........-12 ALL11108 ...... -8 ALL11116 ........-16 ALL11110 ...... -10 ALL11118* ......-20 *-20AN wrench not included in set.
Electric Tire Prep Stand ALL10565 Electric tire prep stand eases grooving, siping, grinding and even cleaning of tires. Two-way switch permits clockwise or counterclockwise rotation. Foot operated pedal controls the rotation of the tire. A 110V accessory outlet is included for convenient plug-in of siper or groover. Stand will accommodate 5x5 or Wide 5 wheels.
Double-Ended Aluminum Wrench Set ALL11120 Wrenches make quick work of checking both halves of a fitting when the line is installed on the car. Won’t mar fittings like steel wrenches. Also sold individually. Individual Double-Ended Wrenches
Part No.
Description
ALL10566 ..........Electric Motor Assembly Only ALL10567 ..........Cart Only
Tire Sander Holder ALL10568 NEW!
Size
Hose Wrenches (Red) Part No.
Fitting Wrenches (Blue) Part No.
-4, -6 -8, -10 -12, -16
ALL11124 ALL11128 ALL11132
ALL11126 ALL11130 ALL11134
Tool Tray ALL14170 Tool tray measures 12" x 18" x 3", with hooks on one side to fasten to racecar nose or sprint/midget front wing and 6" stands on the opposite side so tray will sit level. Tray has 16 holes for spark plug and nozzle holder use.
Bracket bolts to electric tire prep stand ALL10565.
Grooving Iron Holder ALL10569 NEW! Bracket bolts to electric tire prep stand ALL10565 and holds 2 Ideal style grooving irons.
2010
001-016OW10.indd 11
11
11/10/09 8:31:15 AM
TOOLS & ACCESSORIES Tire Sander ALL44185
Tire Sipers
Extend the life of used tires by removing the thin, hardened layer of rubber. Heavy duty 7" Milwaukee sander has a 0-6,000 adjustable RPM range, to compensate for varying tire hardness, and a 10 ft. detachable cord. Backing pad and discs are sold separately.
Get more sipes per swipe! New 6-blade and 14-blade sipers quickly and precisely sipe tires for better traction. Units have adjustable sipe depth. Lightweight sipers use standard utility blades and are constructed for heavy duty use.
Part No.
Description
ALL44186 ..........7" Backing Pad ALL44187 ..........7", 36 Grit Discs, 5-Pack
Description
ALL10265
ALL10265 ..........6-Blade, Black ALL10264 ..........14-Blade, Red
Tire Siper ALL10109 Cutting tires for added traction is easy with this handy tool. Push tool across tire; no heat required. Includes #4 head and blade. Replacement Blade
Tire Grinding Discs Grind off the hardened outer “skin� on used dirt track tires and create round, aggressive sipes to increase traction. Part No.
Part No.
Part No.
Description
IHKBL04 ............#4 Blades, 12-Pack
Description
ALL44180 ..........4" Dia., 23 Grit, 5/8" Hole ALL44182 ..........7" Dia., 16 Grit, 7/8" Hole Safety Note: To prevent bodily injury the tire must be mounted on the car or secured in a tire holder. Eye and hand protection is required.
Siping Heads NEW! For use with Ideal IHK 125 grooving iron, heads have spacers to convert grooving iron to a 4-blade siping tool. Blades for siping sold separately. Part No.
Tire Tool ALL10550 NEW!
Description
ALL10545 ..........#3 Siping Head ALL10546 ..........#4 Siping Head Related Components IHKBL03 ............#3 Blades, 12-Pack IHKBL04 ............#4 Blades, 12-Pack
Tire tool perforates tire surface for better traction. Steel roller is 2" wide with a series of 1/4" tall, straight pin rows. 5" wood handle. Use caution when handling and storing tool, pins are needle sharp.
ALL10545
With Blades
Bead Breakers Convenient tools make quick work of breaking down even the most stubborn tire beads. Durable steel construction with rubber hand grips. Wide jaw bead breaker works well with soft sidewall tires. For use with 15" wheels.
Heated Tire Groover ALL10270 Groover adds extra traction in minutes. Tapered, razor sharp blade grooves fast and easy. To operate, insert a blade into the groover, set blade height with a tire depth gauge and set the power level. Place the cutting edge against the tire surface and apply pressure to activate rocker switch, creating instant heat. Includes 4/32", 6/32", 8/32" and 10/32" flat blades. Part No.
Description
Part No.
Replacement Blades (12-Pack) # ALL10267 1 Round, 1/32" ALL10274 # ALL10268 2 Round, 2/32" ALL10275 # ALL10269 3 Round, 3/32" ALL10276 # ALL10271 3 Flat, 3/32" ALL10277 # 4 Flat, 4/32" ALL10278 ALL10272 # 6 Flat, 6/32" ALL10279 ALL10273 Replacement Parts ALL99105 Head Assembly ALL99106 Front Pads With Screws, 3-Pair ALL99107 Rear Pads With Screws, 3-Pack ALL99104 Tension Lever Kit
Description
ALL99104 .........Tension Lever Kit ALL99108 .........Blades For ALL10266 (36 Individual Blades)
12
Tire Spoons
8 Flat, 8/32" # 10 Flat, 10/32" # 4 Round, 4/32" # 6 Round, 6/32" # 8 Round, 8/32" # 10 Round, 10/32"
Sipe tires quickly and effortlessly while maintaining precise control. Siping can greatly improve traction by allowing the tire to reach and maintain optimum temperature. A locking lever and blade clamping screw secures up to 13 blades in the head assembly. Blades can be easily positioned up or down to desired cutting depth. A built in blade rail holds blade strips in place while individual blades are snapped away. Tool heats in 10-15 minutes. 110V plug in operation only. Replacement Parts Description
ALL10106
#
Heated Tire Siper ALL10266
Part No.
Description
ALL10105 ..........Standard ALL10106 ..........Wide Jaw
Part No.
ALL10105
ALL10103
ALL10104
Steel Tire Spoon will separate tire from rim after breaking tire bead. Part No.
Description
ALL10103 ..........Straight, 24" Long ALL10104 ..........Curved For Initial Tire Dismounting, 16-1/2" Long
Tire Crayons Ideal for temporary tire marking. 1/2" x 4-5/8". Part No.
Description
ALL12060 ..........White ALL12061 ..........Yellow
Paint Markers Oil-based markers resist weather, washing and peeling. Perfect for writing on tires. Part No.
Description
ALL12050 ........ Aluminum ALL12051 ........ Yellow ALL12052 ........ White
Part No.
Description
ALL12053 ........ Red ALL12054 ........ Blue ALL12055 ........ Light Blue
2010
001-016OW10.indd 12
11/12/09 4:33:12 PM
TOOLS & ACCESSORIES Air Hose Reels
Stack Stands
Air hose reels are spring loaded for automatic rewind. A locking ratchet holds hose at the desired length. Adjustable guide arm can be angled to compensate for the mount location. Mounting base has two 1/2" wide slots and two 1/2" drilled holes for easy mounting to a suitable flat surface such as floor, ceiling, or wall. 3/8" hose with 1/4" NPT end is included. ALL10520 weight is 19.5 lbs, ALL10521 is 41 lbs. Part No.
ALL10255
ALL10254
Stacked
Description
ALL10520 ..........Air Hose Reel 25Ft. ALL10521 ..........Air Hose Reel 50Ft. ALL10525 ..........Installation Kit for Air Hose Reel
Stacked
Support stands can be stacked together to conserve valuable space in the trailer or the shop. Stands are 14" tall with a sturdy 12" x 15" base. Choose aluminum stands, rated at 3,000 lbs., or steel versions, rated at 3,500 lbs. Sold in pairs. Part No.
ALL10525
Description
ALL10254 .........Steel, Red ALL10255 .........Aluminum, Silver
Aluminum Pit Jack Lightweight, 3,000 lb. capacity floor jack has a low profile to roll under the lowest slung chassis. Made of high quality aluminum, jack incorporates a patented hydraulic system to reach maxi2-Piece Handle mum height of 17-1/2". Large, With Spring Detent two-piece handle has a spring detent to stop it at the 12 o’clock position. Rolls easily on heavy duty rear caster wheels. Optional dirt wing adapts jack for use in unpaved areas. Part No.
Description
ALL10422 ..........3 Pump Red ALL10425 ..........6 Pump Silver Replacement Parts ALL10427 ..........Jack Seal Kit ALL99046 ..........Caster
Toe Plates
Notched Spring Cup With Removable Rubber Insert
Aluminum plates simplify setting of toe-in and toe-out. Plates fit against outside edges of tires. Using two tape measures (sold separately), measure the distance front and rear, between plates. The difference in tape readings is the toe setting. Deluxe plates have radiused edges, slots for narrow and wide tape measures and are 9" tall x 23" wide to work with vehicles with smaller wheel openings. Standard plates are 1/2" thick, 11" tall x 32" wide and work well for vehicles with larger wheels and wheel openings. Set of two plates. Part No.
ALL10117
ALL10119
Description
ALL10117 ..........Standard ALL10119 ..........Deluxe NEW!
Moose Blocks Dirt Wing For Pit Jack ALL10426 Provides a sturdy base for the pit jack when used on a dirt surface.
Chassis set-up blocks are adjustable in 1/4" increments. A quick release pin holds block at desired height. Bottom surfaces of blocks are contoured to fit steel tubing or any flat surface and have magnets for holding block to chassis. Short blocks adjust 1.75"-4". Tall blocks adjust 3"-6". Sold in pairs. Part No.
Description
ALL10720 ..........Short ALL10721 ..........Tall
Valve Core Tool ALL44030 Easily remove and install new valve cores. Base of handle has a machined pattern to aid with grip. Ergonomically designed and crafted from stainless steel. Measures 3" overall length.
16 Ft. Tape Measure ALL10675 16' x 3/4" blade has fractional markings every 1/8" for quick reference.
Tape Measures Ten foot long tapes are ideal for measuring tire diameters and checking staggers. Part No.
ALL10111 ..........Economy ALL10112 ..........Deluxe
ALL10111
2010
001-016OW10.indd 13
ALL10112
Description
13
11/12/09 8:29:13 AM
TOOLS & ACCESSORIES
BODY & CHASSIS ACCESSORIES
Stagger Gauge ALL10116
Steel Tubing
Measures tire diameter and automatically converts it to circumference. Strong tubular gauge will not flex and will provide accurate, consistent stagger measurements every time. Gauge measures from 65" to 115" in 1/4" increments.
Replacement Decal ALL99044
Sold only in pre-cut lengths (4, 8, 12, or 20 ft.). We stock an assortment of round, square and rectangular chrome moly and mild steel tubing. Wall thicknesses may vary, so always check before cutting or welding, especially if the car is to be certified.
Quick Change Oil Plug Wrenches Double-ended, blue anodized aluminum quick change oil plug wrenches are handy for checking fill plugs on center sections and inspection plugs on side bells. Wrenches are offered in two variations for popular Winters quick changes. Part No.
Description
ALL11140 ..........1-3/8" And 1-7/8" ALL11141 ..........1" And 1-3/8"
Drain Pan ALL40112 Round drain pan has molded-in handles and pour spout. 13-1/2" x 11" x 4", 7 quart capacity.
Quick-Change Drain Pan ALL14166 Aluminum drain pan is handy when changing quick-change gears. Builtin perforated shelf holds gears and allows lube to drain into pan. Pan is 101/4" wide, 12" long and 3-3/4" deep.
Drain Pan With Pump ALL14171 Molded plastic basin and lid slide together to prevent spilling of fluid. A crank handle is included for manual operation. A length of straight hex shaft is also included for use with an electric drill. 16" square x 7" tall.
Gear Tote Box ALL14164 Neat plastic quick change gear tote box organizes extra gear sets and keeps them clean.
Van May Quick Fix Tool ALL10237 Resurface quick-change rear end snout with the rear end still in the car using the quick fix tool, developed by sprint car owner/driver Van May. Set up tool on output shaft and rotate cutter to produce a surface 90° to the shaft. Instructions included.
Shim Kit ALL10238 For ALL10237, contains one each, .012", .016", .025" thickness shim.
14
Over 8 Foot Shipped Via Truck Freight
Description
4' Length Part No.
8' Length Part No.
12' Length Part No.
20' Length Part No.
ALL22000-12 ALL22005-12 ALL22010-12 ALL22012-12 ALL22017-12 ALL22020-12 ALL22022-12 ALL22024-12 ALL22026-12 ALL22028-12 ALL22030-12 ALL22032-12 ALL22040-12 ALL22042-12 ALL22044-12 ALL22046-12 ALL22050-12 ALL22060-12 ALL22062-12 ALL22063-12 ALL22064-12 ALL22070-12 ALL22072-12 ALL22082-12 ALL22086-12 ALL22090-12
ALL22000-20 ALL22005-20 ALL22010-20 ALL22012-20 ALL22017-20 ALL22020-20 ALL22022-20 ALL22024-20 ALL22026-20 ALL22028-20 ALL22030-20 ALL22032-20 ALL22040-20 ALL22042-20 ALL22044-20 ALL22046-20 ALL22050-20 ALL22060-20 ALL22062-20 ALL22063-20 ALL22064-20 ALL22070-20 ALL22072-20 ALL22082-20 ALL22086-20 ALL22090-20
ALL22120-8 ALL22124-8 ALL22128-8 ALL22132-8 ALL22133-8 ALL22134-8 ALL22135-8 ALL22136-8 ALL22137-8 ALL22138-8 ALL22139-8 ALL22140-8 ALL22144-8 ALL22145-8 ALL22146-8 ALL22147-8
ALL22120-12 ALL22124-12 ALL22128-12 ALL22132-12 ALL22133-12 ALL22134-12 ALL22135-12 ALL22136-12 ALL22137-12 ALL22138-12 ALL22139-12 ALL22140-12 ALL22144-12 ALL22145-12 ALL22146-12 ALL22147-12
ALL22120-20 ALL22124-20 ALL22128-20 ALL22132-20 ALL22133-20 ALL22134-20 ALL22135-20 ALL22136-20 ALL22137-20 ALL22138-20 ALL22139-20 ALL22140-20 ALL22144-20 ALL22145-20 ALL22146-20 ALL22147-20
ALL22160-8 ALL22164-8 ALL22169-8 ALL22175-8 ALL22182-8
ALL22160-12 ALL22164-12 ALL22169-12 ALL22175-12 ALL22182-12
ALL22160-20 ALL22164-20 ALL22169-20 ALL22175-20 ALL22182-20
ALL22183-12 ALL22184-12
ALL22183-20 ALL22184-20
Round Chrome Moly (4130) 1/4" x .035" ALL22000-4 ALL22000-8 3/8" x .058" ALL22005-4 ALL22005-8 1/2" x .049" ALL22010-4 ALL22010-8 1/2" x .058" ALL22012-4 ALL22012-8 5/8" x .058" ALL22017-4 ALL22017-8 3/4" x .049" ALL22020-4 ALL22020-8 3/4" x .058" ALL22022-4 ALL22022-8 3/4" x .095" ALL22024-4 ALL22024-8 3/4" x .120" ALL22026-4 ALL22026-8 3/4" x .156" ALL22028-4 ALL22028-8 7/8" x .058" ALL22030-4 ALL22030-8 7/8" x .095" ALL22032-4 ALL22032-8 1" x .049" ALL22040-4 ALL22040-8 1" x .058" ALL22042-4 ALL22042-8 1" x .065" ALL22044-4 ALL22044-8 1" x .095" ALL22046-4 ALL22046-8 1-1/8" x .058" ALL22050-4 ALL22050-8 1-1/4" x .058" ALL22060-4 ALL22060-8 1-1/4" x .065" ALL22062-4 ALL22062-8 1-1/4" x .095" ALL22063-4 ALL22063-8 1-1/4" x .120" ALL22064-4 ALL22064-8 1-3/8" x .058" ALL22070-4 ALL22070-8 1-3/8" x .095" ALL22072-4 ALL22072-8 1-1/2" x .065" ALL22082-4 ALL22082-8 1-1/2" x .095" ALL22086-4 ALL22086-8 1-5/8" x .083" ALL22090-4 ALL22090-8 2-1/4" x .120" x 5' Round ALL22095-5
Round Mild Steel (1018) 1/2" x .065" 3/4" x .065" 1" x .065" 1-1/4" x .083" 1-1/2" x .083"† 1-1/4" x .120" 1-1/2" x .095"† 1-1/2" x .065" 1-1/2" x .120" 1-1/2" x .095" 1-5/8" x .120" 1-5/8" x .120"† 1-3/4" x .065" 1-3/4" x .095"† 1-3/4" x .095" 1-3/4" x .120"†
ALL22120-4 ALL22124-4 ALL22128-4 ALL22132-4 ALL22133-4 ALL22134-4 ALL22135-4 ALL22136-4 ALL22137-4 ALL22138-4 ALL22139-4 ALL22140-4 ALL22144-4 ALL22145-4 ALL22146-4 ALL22147-4
Square Mild Steel (1018) 1/2" x .065" 3/4" x .065" 1" x .083" 1-1/2" x .083" 2" x .083"
ALL22160-4 ALL22164-4 ALL22169-4 ALL22175-4 ALL22182-4
Rectangular Mild Steel (1018) 1" x 2" x .120" 2" x 3" x .083"
ALL22183-4 ALL22184-4
ALL22183-8 ALL22184-8
†
Tubing is Drawn Over Mandrel (D.O.M.) and has a tighter wall thickness
2010
001-016OW10.indd 14
11/10/09 8:33:34 AM
BODY & CHASSIS ACCESSORIES Aluminum 1" x 1" Square Tubing Square Tubing is 6061-T6 grade alloy with .125" wall thickness and sold in pre-cut lengths of 4', 8', 12' and 20'. Ideal for fabricating rub rails or building shop, trailer or pit equipment like ladders, pit carts and tire racks.
Sprint Drag Link Tether ALL10252 Over 8 Foot Shipped Via Truck Freight
4' Length Part No.
8' Length Part No.
12' Length Part No.
20' Length Part No.
ALL22257-4
ALL22257-8
ALL22257-12
ALL22257-20
Aluminum Flat And Angled Stock Aluminum stock is ideal for fabricating mounting brackets, etc. Flat stock is 6061-T6, the angled aluminum is 6063-T5. Description
4' Length Part No.
Flat Stock 1" Wide 1/8" Thick ALL22250-4 3/16" Thick ALL22251-4 Angled Stock 1" x 1" 1/16" Thick ALL22253-4 1/8" Thick ALL22254-4 3/16" Thick ALL22255-4
8' Length Part No.
Over 8 Foot Shipped Via Truck Freight 12' Length 16' Length Part No. Part No.
ALL22250-8 ALL22251-8
ALL22250-12 ALL22251-12
– –
ALL22253-8 ALL22254-8 ALL22255-8
– – –
ALL22253-16 ALL22254-16 ALL22255-16
Cap off frame, bumpers or any tubing member. Steel caps are sold in packs of ten. Description
Round End Caps ALL22280 ......... 7/8" O.D. ALL22281 ......... 1-1/4" O.D. ALL22282 ......... 1-1/2" O.D. ALL22283 ......... 1-5/8" O.D. ALL22284 ......... 1-3/4" O.D.
Part No.
Description
Square End Caps ALL22290.......... 1" x 1" ALL22292.......... 2" x 2" ALL22294.......... 2" x 3"
Closed-cell foam does not absorb moisture, but progressively absorbs shock (gets more dense as it is compressed). Offset inside diameter allows easy installation, with thicker padding toward driver. Available in 3 foot lengths. Description
ALL14100 ..........Black ALL14101 ..........Red ALL14102 ..........Blue ALL14103 ..........Orange ALL14104 ..........Yellow ALL14105 ..........Gray ALL14106 ..........Purple
SFI Mini Roll Bar Padding ALL14112 Mini roll bar padding is ideal for tight areas in a race car when standard padding is too large. Unique, compact design provides driver protection to a specific area. Peel and stick backing for easy installation on 1-1/4" to 1-3/4" tubing. Meets SFI 45.1 specifications. Sold in 3 foot lengths, black only.
SFI Roll Bar Padding Provides 180 degree coverage where space concerns are not a problem. Peel and stick backing for easy installation. Meets SFI 45.1 specifications. Choose from two sizes, each 3 feet long, black only. Part No.
Description
ALL14110 ..........1-1/8" To 1-1/2" O.D. Tubing ALL14111 ..........1-5/8" To 2" O.D. Tubing
Chassis Brackets ALL98120 Save time during car construction with a full selection of mild steel chassis brackets. Part No.
Roll Bar Padding
Part No.
Steel End Caps
Part No.
Keeps drag link tethered to the chassis if it becomes disconnected. Tethering of drag link is required by most sanctioning bodies. 24" long x 1" wide, woven nylon.
Description
ALL60000 .187" Chassis Tab, 2.750" Ht., No Hole ALL60001 .187" Chassis Tab 2.750" Ht., .375" Hole ALL60002 .187" Chassis Tab, 2.750" Ht., .500" Hole ALL60006 .187" Universal Flat Tab, 1.825" Ht., .500" Hole ALL60007 .250" Universal Flat Tab, 2.000" Ht., .375" Hole ALL60008 .250" Universal Flat Tab, 2.000" Ht., .500" Hole ALL60009 .125" Universal Flat Tab, 1.500" Ht., .250" Hole ALL60010 .125" Radius Tab, 1.500" Ht., .250" Hole, 1.250" Radius ALL60011 .125" Radius Tab, 1.500" Ht., .375" Hole, 1.250" Radius ALL60016 .125" Gusset Tab, 2.050" Ht., .375" Hole, 1.500" Radius ALL60018 .187" Seat Tab, 2.375" Long, .500" Hole ALL60019 .250" Seat Tab, 2.375" Long, .500" Hole ALL60020 16 Gauge Window Frame Tab, 1" x 1" Steel ALL60021 16 Gauge Window Frame Tab, .750" x .750" Steel .125" Bumper Tab, 1.250" Long, .250" Hole, ALL60022 .937" Flat To Center Of Hole .187" Rub Rail Flange, 1.250" Dia. Hole, .375" ALL60023 Small Holes, 2.250" Between Center Of Holes ALL60024 .085" Bell Crank Tab, 1.550" Ht., .375" Hole ALL60029 Brake Line Adapter Tab (Bolt-On) Brake Line Adapter Tab (Weld-On) ALL60030 1.250" Ht., .650" Hole ALL60031 Double Shear Seat Belt Bracket ALL98120 Seatbelt Mount Backing Plates
ALL60031 Qty Per Pack
4 4 4 4 4 4 4 4 4 4 4 4 10 10 4
Aluminum Knee Guard ALL10250 Knee guard helps keep legs in place, especially in a crash. Universal design fits most sprint cars.
Safer Seat System Bolt-on kit provides added support, comfort and enhanced safety around the head and shoulder area. System bolts to existing seat and is available with short or long right side head supports. Short version commonly used in dirt applications for easier tearoff removal and better vision. Sold unassembled as shown. Part No.
4 4 2
Description
ALL98150 ..........Short RH ALL98152 ..........Long RH
4 1 2
ALL98150 Detail
2010
001-016OW10.indd 15
15
11/10/09 8:33:52 AM
BODY & CHASSIS ACCESSORIES 4' x 8' Plastic Sheets Air Rivet Gun ALL18207 HDPE sheet plastic is 4' x 8' and available in two thicknesses .070" and .100". The .070" thick sheets are the same thickness as our rolled plastic and available in Black and White. The .100" thick sheets are available in many of the same colors as our rolled plastic. Part No.
Description
Hand Rivet Gun ALL18206
ALL22246 ..........0.070", White ALL22248 ..........0.070", Black ALL22460 ..........0.100", White ALL22461 ..........0.100", Black ALL22462 ..........0.100", Red ALL22463 ..........0.100", Pepsi Blue (Light) ALL22464 ..........0.100", Chevron Blue (Med.) ALL22465 ..........0.100", Orange ALL22466 ..........0.100", Yellow
Includes interchangeable nosepieces for 3/32", 1/8", 5/32", and 3/16" dia. rivets.
Deluxe Hand Rivet Gun ALL18208
Aluminum
Deluxe rivet tool includes nosepieces for 3/32", 1/8", 5/32", and 3/16" rivets. Wrench stores inside handle for quick nosepiece changes.
Aluminum sheets are 4 ft. x 10 ft., .040" thick, and available in most popular colors. Part No.
Heavy duty air rivet gun can be used with steel or aluminum rivets from 3/32" to 3/16".
Description
ALL22200 ................. Plain ALL22201 ................. Chrome (Bright Clear) ALL22202 ................. White ALL22203 ................. Xtreme Red ALL22204 ................. Red ALL22209 ................. Red On Red ALL22205 ................. Bright Gold ALL22206 ................. Gloss Black ALL22207 ................. Black On Black Gloss ALL22208 ................. Flat Black ALL22219 ..................Black On Black Flat ALL22210 ................. Shell Gray (Med.) ALL22211 ................. Xtreme Green ALL22212 ................. Pepsi Blue (Light) ALL22213 ................. Chevron Blue (Med.) ALL22214 ................. Heron Blue (Dark) Aluminum And Diamond Plate ALL22215 ................. Orange Shipped Freight Truck, Six Sheet ALL22216 ................. Yellow Minimum and Surcharge ALL22217 ................. Xtreme Purple For A Shipping Pallet. ALL22218 ................. Maroon
Rivet Gun For Cordless Drill ALL18205 An adapter for cordless drills, the rivet gun speeds up installation of “blind” rivets. A real hand and time saver. Includes nosepieces for 3/32", 1/8", 5/32" and 3/16" rivets.
3/16" Double Ended Drill Bits ALL18204 A must for every racer’s toolbox. Package of six.
13/64" Drill Bits ALL18203 A common size bit for working with 3/16" flange type rivets. High speed steel bits have black oxide finishes and self centering tips. Flute length: 1-3/16", overall length: 2-1/4". Sold as a 2-pack.
Diamond Plate Aluminum ALL22240 4' x 8' sheets are .063" thick and provide an attractive, shiny, non-slip finish for trailer floors, steps, etc.
Ludwig Clamps ALL18232 Use clamps to secure dash access panels, deck lids and other items. Sold in packs of four.
Quick Turn Wrench ALL19400 Fits slot head fasteners and reduces the risk of body or fastener damage.
Billy Balog
16
Photo: John Berglund
2010
001-016OW10.indd 16
11/10/09 8:34:21 AM
BODY & CHASSIS ACCESSORIES Quick Turn Fasteners and Accessories Cadmium plated fasteners speed removal of body panels and are available in two body lengths to accommodate various material thickness.
Oval Head Buttons
Flush Head Self-Ejecting Buttons
10-Pack Part No.
1/4" .400" Long, Steel 5/16" .500" Long, Steel .500" Long, Aluminum 7/16" .400" Long, Steel .500" Long, Steel .550" Long, Steel .400" Long, Aluminum .500" Long, Aluminum .550" Long, Aluminum *NEW NEW
50-Pack Part No.
ALL19211*
ALL19213*
ALL19214* ALL19276*
ALL19215* ALL19278*
ALL19216 ALL19220 ALL19230 ALL19280 ALL19286 ALL19290
ALL19218 ALL19222 ALL19232 ALL19282 ALL19288 ALL19292
10-Pack Part No. 50-Pack Part No.
5/16" .400" Long, Steel .450" Long, Steel .500" Long, Steel .550" Long, Steel .650" Long, Steel 7/16" .500" Long, Steel .550" Long, Steel
ALL19223* ALL19289*
NEW *NEW
10-Pack Part No.
50-Pack Part No.
ALL19186* ALL19256*
ALL19188* ALL19258*
ALL19042 ALL19048 ALL19052 ALL19058 ALL19062
ALL19064* ALL19068*
ALL19066* ALL19070*
ALL19190 ALL19200 ALL19210 ALL19260 ALL19266 ALL19270
ALL19192 ALL19202 ALL19212 ALL19262 ALL19268 ALL19272
1-3/8" (.090" Wire Diameter) .325" Reach ALL19320 .375" Reach ALL19330 .425" Reach ALL19336 1" (.080" Wire Diameter) .250" Reach ALL19300 .325" Reach ALL19310 3/4" (.062" Wire Diameter) .200" Reach ALL19296*
ALL19302 ALL19312
ALL19296
ALL19298*
Not sure where to start when using quick turn fasteners? Kit includes Allstar’s most popular 7/16" aluminum oval head fasteners (ALL19286) and .375" springs (ALL19330.)
ALL19384 ALL19390
Mounting Brackets for 1" Springs (.0625" Thick) 10-Pack Part No. 50-Pack Part No. ALL19340 ALL19350 ALL19364
ALL19342 ALL19352 ALL19366
ALL19394
ALL19360
ALL19364
Mounting Brackets for 1" and 1-3/8" Springs (.0625" Thick) 10-Pack Part No. 50-Pack Part No. Weld-on LH Weld-on RH Rivet-on LH Rivet-on RH Weld-on, Lightweight (1-3/8" Spring only)
2010
017-032OW10.indd 17
ALL19300
Quick Turn Starter Kit ALL19410
ALL19238 ALL19242 ALL19252
ALL19380
Weld-on Weld-on w/ALL19300 Spring Weld-on, Lightweight
ALL19322 ALL19332 ALL19338
*NEW NEW
10-Pack Part No. 50-Pack Part No.
ALL19236 ALL19240 ALL19250
ALL19320
10-Pack Part No. 50-Pack Part No.
Winged Head Buttons
ALL19340
ALL19040 ALL19046 ALL19050 ALL19056 ALL19060
Springs
*NEW NEW
7/16" .400" Long, Steel .500" Long, Steel .550" Long, Steel
ALL19102 ALL19112
NEW *NEW
Flush Head Buttons 5/16" .500" Long, Steel .500" Long, Aluminum 7/16" .400" Long, Steel .500" Long, Steel .550" Long, Steel .400" Long, Aluminum .500" Long, Aluminum .550" Long, Aluminum
ALL19100 ALL19110
10-Pack Part No. 50-Pack Part No.
5/16" .400" Long, Steel .450" Long, Steel .500" Long, Steel .550" Long, Steel .650" Long, Steel 7/16" .500" Long, Steel .650" Long, Steel
10-Pack Part No. 50-Pack Part No.
ALL19221* ALL19287*
ALL18992 ALL18998 ALL19002 ALL19008 ALL19012
Winged Head Self-Ejecting Buttons
Oversized Oval Head Buttons 7/16" .500" Long, Steel .500" Long, Aluminum
ALL18990 ALL18996 ALL19000 ALL19006 ALL19010
ALL19380 ALL19384 ALL19390 ALL19394 ALL19360
ALL19382 ALL19386 ALL19392 ALL19396 ALL19362
17
11/10/09 8:38:25 AM
BODY & CHASSIS ACCESSORIES 3/16" Small Head Colored Rivets
3/16" Flange (Tri-fold) Rivets
Box of 250 has a 1/4" to 3/8" grip range. Color
Steel Mandrel Part No.
Alum. Mandrel Part No.
White Red Black Pepsi Blue Chevron Blue Orange Yellow
ALL18114 ALL18120 ALL18126 ALL18132 ALL18134 ALL18136 ALL18138
ALL18116 ALL18122 ALL18128 ALL18133 ALL18135 ALL18137 ALL18139
Box of 250 with 1/8" to 3/8" grip range.
ALL18158 ALL18164 ALL18170 ALL18175 ALL18177 ALL18179 ALL18181
Grip Range
ALL18101 ALL18103 ALL18105
ALL18107 ALL18109 –
1/8" To 1/4" 1/4" To 3/8" 3/8" To 1/2"
ALL18141 ALL18149 ALL18143 ALL18151 ALL18145† – ALL18147 ALL18153 † Box of 3,000 rivets
Choose standard 1/2" O.D. or new 1" large O.D. washers. Part No.
Head Size
Grip Range
Small Medium Medium Medium
3/16" to 3/8" 1/16" to 3/8" 1/16" to 3/8" 1/16" to 3/8"
Package Qty.
1/2" 1/2"
500 500
1"
100
ALL18200
ALL18215
For use with quick turn fasteners, place transfer punch in a weld plate or body panel. Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled.
Box of 250 with steel mandrel. Various grip ranges available. Part No.
O.D.
Transfer Punches NEW!
3/16" Multi-Grip Rivets ALL18110 ALL18090 ALL18091 ALL18092
I.D.
Aluminum ALL18200 1/8" ALL18202 3/16" Steel - NEW! ALL18215 3/16"
1/8" To 1/4" 1/4" To 3/8" 1/4" To 3/8" 3/8" To 1/2"
Color
Grip Range
1/8" To 1/4" 1/8" To 1/4" 5/16" To 3/8" 5/16" To 3/8"
Back-up Washers
Grip Range
Silver Silver Black White
500 25 500 25
Box of 100 with medium head and 1/8" to 3/8" grip range. Aluminum mandrel.
Box of 250 (unless noted†). Various grip ranges available. Alum. Mandrel Part No.
ALL18190 ALL18191 ALL18192 ALL18194
1/8" Flange (Tri-Fold) Rivets ALL18199
3/16" Large Head Silver Rivets Steel Mandrel Part No.
ALL18184 ALL18186 ALL18183 ALL18187 ALL18188 ALL18189
Box of 250 with small head and 1/8" to 3/8" grip range. Steel mandrel.
Box of 250. Various grip ranges available. Alum. Mandrel Part No.
– – ALL18182 – – –
1/8" Multi-Grip Silver Rivets ALL18198
3/16" Small Head Silver Rivets Steel Mandrel Part No.
Small Small Medium Medium Medium Medium
ALL18196 ALL18197 – –
Steel Mandrel Alum. Mandrel Part No. Part No.
ALL18156 ALL18162 ALL18168 ALL18174 ALL18176 ALL18178 ALL18180
Silver Black Silver Black White Red
Steel Mandrel Alum. Mandrel Part No. Part No.
Stainless Steel Alum. Mandrel Mandrel Part No. Part No. Quantity
Box of 250 has a 1/4" to 3/8" grip range. Color
Head Size
1/8" Small Head Silver Rivets
3/16" Large Head Colored Rivets
White Red Black Pepsi Blue Chevron Blue Orange Yellow
Color
Part No.
Description
ALL19402 ..........For 5/16" Fasteners ALL19403 ..........For 7/16" Fasteners
ALL19402
ALL19403
ALL18110
Rivet Guns and Step Drill Sets are available on page 4.
18
2010
017-032OW10.indd 18
11/12/09 8:31:27 AM
BODY & CHASSIS ACCESSORIES Sprint Wing Caps
Ballast
Prevent rocks and debris from damaging the leading edge of many popular sprint car wings with a protective cap. Durable high impact plastic has a carbon fiber look.
Add weight where it’s needed. Available in 25, 30 and 40 pound blocks.
Part No.
ALL14180 ..........25 Lb. 4" x 8" x 2" ALL14179 ..........30 Lb. 2-1/2" x 2-1/2" x 12" ALL14182 ..........40 Lb. 12" x 3-1/2" x 2-1/2"
Description
ALL23220 ..........Top Wing ALL23222 ..........Front Wing
Air Scoop For Sprint Car ALL23224
Aluminum line clamps have a removable neoprene cushion to protect brake/fuel/oil lines, ignition wires or battery cables. Mounting hole is 1/4". Sold in packages of ten. Part No.
Hydraulic Wing Cylinders Strong hydraulic wing cylinders have an aluminum body which houses a steel piston and pushrod assembly. Available in 10" and 12" length. Description
Part No.
Use a manual adjuster for sprint car top wings when rules do not permit hydraulic cylinders. Slider includes 3/8"-24 steel thread rod ends and is adjustable from 20" to 32" center-to-center in 1" increments with locking pin. Weight is less than 1 lb.
Economy Ballast Brackets
Clamp Size
ALL18310 ..........3/16" ALL18311 ..........1/4" ALL18312 ..........3/8" ALL18313 ..........1/2" ALL18314 ..........5/8" ALL18315 ..........3/4" ALL18316 ..........7/8" ALL18317 ..........1"
ALL18310
ALL18314
2-Piece aluminum clamps dress up wiring or hard line. Package of 4. Part No.
Description ALL14195
Ballast Brackets Used for mounting ballast or other components. Aluminum brackets are anodized black and have a 1/2"-13 tapped hole for a ballast mounting stud. Stud and nut must be purchased separately. Description
ALL14178 ..........Fits 1" O.D. Round Tubing ALL14183 ..........Fits 1-1/4" O.D. Round Tubing ALL14184 ..........Fits 1-3/8" O.D. Round Tubing ALL14185 ..........Fits 1-1/2" O.D. Round Tubing ALL14187 ..........Fits 1-3/4" O.D. Round Tubing ALL14188 ..........Fits 2" O.D. Round Tubing ALL14189 ..........Fits 2" x 2" Square Tubing ALL14187 ALL14190 ..........Stud And Nut, 1/2"-13 x 6" Long
ALL18306
Universal Line Clamps NEW!
Anodized aluminum brackets allow mounting ballast quickly. Brackets are tapped with a 1/2"-13 hole for a ballast mounting stud. Mounting stud and nut sold separately.
Part No.
ALL18301
Nylon line clamps are tough, resistant to aging and are easily cleaned. Clamps are black, and sold in packages of ten.
Manual Wing Adjuster ALL48004
ALL14195 ..........Fits 1-1/2" O.D. Round Tubing ALL14197 ..........Fits 1-3/4" O.D. Round Tubing ALL14190 ..........Stud And Nut, 1/2"-13 x 6" Long
Clamp Size
ALL18300 ..........3/16" ALL18301 ..........1/4" ALL18302 ..........3/8" ALL18303 ..........1/2" ALL18304 ..........5/8" ALL18305 ..........3/4" ALL18306 ..........7/8 " ALL18307 ..........1" ALL18308 ..........1-1/4"
Nylon Line Clamps
ALL48000 ..........10" ALL48002 ..........12"
Part No.
Description
Aluminum Line Clamps
Maximize airflow through the radiator, increase cooling efficiency and at the same time, create down force. Lightweight and durable gray plastic is 1/8" thick x 21" wide x 11" tall.
Part No.
Part No.
Size
ALL18320
ALL18320 ..........3/16" ALL18321 ..........1/4" ALL18322 ..........5/16" ALL18323 ..........3/8"
Thin OD Jam Nuts NEW! Specialty jam nuts have smaller outside diameters allowing smaller wrenches to be used when changing radius rod lengths. Example: with 1/2" bolts the same 3/4" wrench can be used to adjust radius rod or mounting hole locations. Thread Size
Wrench Size
Steel Part No.
Alum. Part No.
5/8" RH 5/8" LH
3/4" 3/4"
ALL18292 ALL18293
ALL18296 ALL18297
ALL14189
ALL14190
2010
017-032OW10.indd 19
19
11/10/09 8:39:25 AM
BODY & CHASSIS ACCESSORIES Jam Nuts Allstar Jam Nuts have many uses. Great for locking rod ends tightly on suspension tubes or rack and pinion steering units. Available in steel or aluminum in most popular thread sizes. Size
Steel Part No.
Alum. Part No.
1/4" RH ALL18250 – 1/4" LH ALL18251 – 5/16" RH ALL18252 – 5/16" LH ALL18253 – 3/8" RH ALL18254 – 3/8" LH ALL18255 – 7/16" RH ALL18256 – 7/16" LH ALL18257 – 1/2" RH ALL18258 ALL18278 1/2" LH ALL18259 ALL18279 5/8" RH ALL18260 ALL18280 5/8" LH ALL18261 ALL18281 3/4" RH ALL18262 ALL18282 3/4" LH ALL18263 ALL18283 3/4" RH ALL18264* – 7/8"-10 RH ALL18266 (Sway Bar Adj. Nut) – 1"-8 RH ALL56110 (Jack Bolt Nut) – *Commonly used with UBM35-1107, 3/4"-10 jack bolt.
Steel Jam Nut Assortments Assortments contain five each of 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4". Choose left- or right-hand thread. Part No.
Description
Positive Cam Lock Shifter ALL54135 CNC-machined billet aluminum shifter clamps to the frame on driver’s right. Designed for use with live axle shifter quick change. Shifter includes all steel hardware, heavy duty cable, and quick release end. Replacement Cable ALL54142
Positive Lock Shift Cable ALL54142 Shift cable is 43" long with 10-32 threaded ends. Cable does not include rod end (use Aurora AURCW-3).
T-Handle Shifter Cable ALL54140 Cable locks in position with a twist of the handle to engage rear end of most sprint cars. 47" long with 10-32" threaded end. Shifter cable is sold less rod end (use Aurora AURCW-3).
ALL18290 ..........35 Asst. RH Jam Nuts ALL18291 ..........35 Asst. LH Jam Nuts
Heel Riser ALL54090 NEW!
Nyloc Nuts Thin Nyloc nuts have the same features as standard size Nyloc nuts and weigh up to 50 percent less. Nylon insert allows nut to be installed and removed many times, without damaging threads. Sold in packages of ten. Part No.
Description
ALL18238-10 ........... 1/2"-20 RH ALL18240-10 ........... 5/8"-18 RH ALL18242-10 ........... 3/4"-16 RH
Aluminum heel riser is pre-drilled for easy mounting and includes a non-skid pad. 1" tall x 4-1/2" wide.
Throttle Pedal Assembly ALL54106 Rugged aluminum pedal may be mounted to the floor pan or lower frame rail for smooth, safe throttle control. Includes return spring bracket and fasteners.
Reducer Bushings NEW! Steel bushings reduce the rod end pivot ball I.D. to accept a smaller bolt size. Description O.D. To I.D.
2-Pack Part No.
10-Pack Part No.
1/2" To 3/8" 5/8" To 1/2" 3/4" To 1/2" 3/4" To 5/8"
ALL18565 ALL18566 ALL18567 ALL18568
ALL18565-10 ALL18566-10 ALL18567-10 ALL18568-10
Tapered Spacers NEW! Steel and aluminum tapered spacers make shock or radius rod mounting neat and strong, and help prevent binding. Package of 2. Part No.
Length
Steel 1/2" I.D. ALL18570 1/4" ALL18571 3/8" ALL18572 1/2" ALL18574 3/4" ALL18576 1"
20
Part No.
Length
Aluminum 1/2" I.D. ALL18590 1/4" ALL18592 1/2" ALL18594 3/4" ALL18596 1"
Throttle Cable ALL54145 Throttle cable fits injected or carbureted sprint cars. Cable is 5 ft. long with 10-32 threaded ends.
Throttle Bell Cranks Aluminum bell cranks have a bearing for smooth operation and are often used on sprint car throttle linkages. Two versions are available. Part No
Description
ALL54150 ..........Arms Set 75 Deg. Apart, 35 Grams ALL54152 ..........Arms Set 70 Deg. Apart, 6061 40 Grams
ALL54150
ALL54152
2010
017-032OW10.indd 20
11/10/09 8:39:54 AM
BODY & CHASSIS ACCESSORIES
STEERING & SUSPENSION ACCESSORIES
Accessory Clamps NEW!
Molded Steering Wheel Pad ALL52322
Aluminum clamps are ideal for mounting small parts. Clamps have 1/4"-20 tapped holes and include two button head Allen screws. Part No.
Size
ALL10455 ..........1.00" ALL10456 ..........1.25" ALL10457 ..........1.375" ALL10458 ..........1.50" ALL10459 ..........1.75"
Molded pad fits flat or dished 3-spoke steering wheels. Velcro straps are permanently secured to pad for quick installation.
Steering Wheel Pad ALL52320 ALL10456
Black vinyl covered pad fastens to most racing steering wheels with three Velcro straps.
ALL10459
Universal Brackets Universal 1/4" thick aluminum brackets may be drilled, and tapped, to custom mount just about anything. Part No.
Threaded Tubing Ends Fine threaded steel tubing ends are ideal for building custom length suspension tubes. Available in RH and LH threads.
Description
ALL10452 ..........Bracket For 1-1/4" Tubing ALL10453 ..........Bracket For 1-1/2" Tubing ALL10454 ..........Bracket For 1-3/4" Tubing
Radio Boxes Aluminum radio box has a padded insert to absorb vibration. Clamps to roll bar tubing and fits most racing radios. Measures 4"W x 2.5"D x 7"H. Part No.
Description
ALL10440 ..........Box For 1-3/4" Tubing ALL10442 ..........Box For 1-1/2" Tubing
STEERING & SUSPENSION ACCESSORIES Sprint Car Power Steering Tank ALL36118 Dash mounted tank is 6" tall and 4" wide to fit all sprint cars and is tapered to keep fluid from aerating. Tank is fitted with 1/2" NPT outlet, -6 return, 1/8" NPT inlet for wing cylinder return, and an O-ringed lid. One quart capacity.
ALL52302 ..........Button Style, Hex ALL52304 ..........360° Flange Style, Splined Replacement Components ALL52303 ..........Hex Coupler For ALL52302 ALL52305 ..........Spline Coupler For ALL52304
Steering Wheel Extensions Aluminum steering wheel extensions fit between steering wheel and quick disconnect so the distance between driver and steering wheel can be adjusted. Includes fasteners. Part No.
RH Part No.
LH Part No.
3/8" x .058" 1/2" x .058" 5/8" x.058" 3/4" x .058" 7/8" x .058" 1" x .058" 1" x .065" 1-1/8" x .058" 1" x .058" 1" x .095" 1-1/4" x .095" 1-1/4" x .120" 1-1/4" x .095" 1-1/4" x .120" 1-3/8" x .095"
ALL22500 ALL22504 ALL22508 ALL22512 ALL22518 ALL22522 ALL22526 ALL22530 ALL22534 ALL22538 ALL 22542 ALL22546 ALL22550 ALL22554 ALL22558
– – ALL22509 ALL22513 ALL22519 ALL22523 ALL22527 ALL22531 ALL22535 ALL22539 ALL22543 ALL22547 ALL22551 ALL22555 ALL22559
Tungsten steel taps are titanium coated for clean, sharp internal threads and long life. Taps are available in right-hand and left-hand threads. Part No.
Description
ALL11064 ..........RH 1/2"-20 ALL11065 ..........LH 1/2"-20 ALL11066 ..........RH 5/8"-18 ALL11067 ..........LH 5/8"-18 ALL11068 ..........RH 3/4"-16 ALL11066 ALL11069 ..........LH 3/4"-16
Aluminum hub mates with the steel coupler which must be welded to a 3/4" steel steering shaft (ALL22190). Steering wheel can then be quickly removed and replaced. Choose button style or 360° flange style release. Description
Tubing Size
10-32 5/16"-24 3/8"-24 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 5/8"-18 5/8"-18 3/4"-16 3/4"-16 3/4"-16
Fine Thread Taps
Steering Wheel Disconnects
Part No.
Thread Size
ALL11068
ALL52302
Polished Sprint Car Steering Arms ALL52304
Universal billet aluminum steering arms fit most sprint cars and are polished to a brilliant finish. Part No.
ALL56351 ALL56350
Description
ALL56350 ..........LH Combo Arm ALL56351 ..........RH Arm
Description
ALL52310 .......... 1/2" Thick ALL52312 .......... 1" Thick ALL52314 .......... 1-1/2" Thick ALL52316 .......... 2" Thick
2010
017-032OW10.indd 21
21
11/10/09 8:40:28 AM
NEW! Aluminum Front Torsion Arms Manufactured from durable 2024 American Aluminum, Allstar Performance Torsion Arms are available in three styles; straight, angle broached and “S” bend. Black anodized finished, these arms are exceptionally strong and will not flex. Part No.
STEERING & SUSPENSION ACCESSORIES Aluminum Birdcages
ALL55000 ALL55050
ALL55002 ALL55051
Description
ALL55000 ..........LF Torsion Arm ALL55002 ..........LF Torsion Arm, S-Bend ALL55004 ..........RF Torsion Arm ALL55005 ..........RF Torsion Arm, Angle Broached
ALL55004
ALL55042
ALL55052
Single bearing design aluminum Birdcages are among the strongest on the market and feature replaceable flags, spuds and 28mm bearings. Black anodized finished and fitted with grade eight hardware.
Aluminum Rear Torsion Arms Lightweight, yet rigid rear torsion arms are manufactured from 2024 American made aluminum. Black anodized finished torsion arms are designed to fit the most popular 40" chassis. Part No.
ALL55040
Part No.
Description
ALL55040 ..........LR Birdcage ALL55042 ..........RR Birdcage Replacement Components ALL55050 ..........RR Brake Mount, Steel ALL55051 ..........Flag ALL55052 ..........Spud ALL55053 ..........Bearing, 28mm ALL55054 ..........Spirolox ALL55055 ..........Arm Bolt
Description
ALL55010 ..........LR Torsion Arm ALL55012 ..........RR Torsion Arm
Aluminum Torsion Stop ALL55020 Torsion Stop, manufactured from 2024 Aluminum, includes a grade eight bolt and aluminum jam nut with a 5/8” head so only one size wrench is needed to make adjustments. Black anodized finish.
ALL55053
ALL55054
Aluminum Brake Mounts Machined with a straight base to keep the caliper true and straight. Plain aluminum finished mounts are sold complete with mounting hardware.
Torsion Arm Stop Kit ALL10730
Part No.
Description
ALL55070 ..........Front Brake Mount, For 10-7/8" Dia. Rotor ALL55072 ..........Front Brake Mount, For 10-1/8" Dia. Rotor
Kit holds torsion arm and stop in place if pinch bolts loosen or breakage occurs.
Aluminum Steering Mounts
Aluminum Pitman Arms Fabricated from durable American made 2024 Aluminum, Pitman Arms are offered in two styles; straight and angle broached. Black anodized finished, Allstar Performance Pitman Arms are tough enough to withstand even the roughest tracks. Part No.
Description
ALL55030 ..........Pitman Arm, Angle Broached ALL55032 ..........Pitman Arm, Straight
ALL52115
Combo and Right Hand Steering Arms are fabricated from 2024 American-made aluminum and black anodized finished. Very strong, solid design for rough tracks. Description
ALL55060 ..........Combo Steering Arm ALL55062 ..........RH Steering Arm
Bryan Clauson
22
ALL55062
ALL52117
Steering Mounts are manufactured from 2024 American made aluminum. Black anodized finished, steering mounts are offered in three versions; short, long, and with fuel shut-off. ALL52115 allows convenient mounting of Waterman Fuel Shut-Off Valve (pg. 213). Rigid design keeps steering gear in place.
Aluminum Steering Arms
Part No.
ALL52116
Part No. ALL55060
Description
ALL52115 ..........Steering Mount, Includes Fuel Shut-Off Bracket ALL52116 ..........Steering Mount, Long ALL52117 ..........Steering Mount, Short
Photos: Jim DenHamer/Clauson Racing
2010
017-032OW10.indd 22
11/10/09 8:41:00 AM
STEERING & SUSPENSION ACCESSORIES Aluminum Suspension Tubes
Coil Over Thrust Bearing Kit ALL64210 NEW!
Gold anodized tubes have a machined wrench flat on one end for ease of adjustment. Tubes have .156" wall thickness and are available in two diameters with a variety of lengths. The 56400 Series tubes are 7/8" diameter and both ends are tapped 5/8", one RH and one LH. The 56500 Series tubes are 1" diameter and both ends are tapped 3/4", one RH and one LH. Length
5/8" Thread
3/4" Thread
Length
5/8" Thread
3/4" Thread
5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17"
ALL56405 ALL56406 ALL56407 ALL56408 ALL56409 ALL56410 ALL56411 ALL56412 ALL56413 ALL56414 ALL56415 ALL56416 ALL56417
ALL56505 ALL56506 ALL56507 ALL56508 ALL56509 ALL56510 ALL56511 ALL56512 ALL56513 ALL56514 ALL56515 ALL56516 ALL56517
18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30"
ALL56418 ALL56419 ALL56420 ALL56421 ALL56422 – – – – – – – –
ALL56518 ALL56519 ALL56520 ALL56521 ALL56522 ALL56523 ALL56524 ALL56525 ALL56526 ALL56527 ALL56528 ALL56529 ALL56530
Unthreaded 72" Suspension Tubes Part No.
Description
ALL56472 ................. 72" Long, 7/8" Dia. x .156" Wall For 5/8" Rod Ends ALL56572 ................. 72" Long, 1" Dia. x .156" Wall For 3/4" Rod Ends
Kit installs between the spring and the coil-over nut to enable easier turning of the nut under pressure. A must with coil bind, soft spring setups. 2.5" I.D. x 3.25" O.D.
Hydraulic 2.5" Coil Over Spring Adjuster ALL64220 With weight jack assembly, driver can adjust car handling while driving. Adjustment knob can be used to increase or decrease spring pressure. Adjuster includes hydraulic ram, hydraulic pump with adjustment knob, 9' braided hose and two washers for use with standard or threaded body shocks.
Shock Protector ALL64200 Plastic shock protector slides over aluminum threaded body shock to protect against wear from spring. Protector measures 6" from spring seat to end, has an I.D. that measures 2.25" and works with all 2.5" I.D. springs. Unit should just cover shock body and may need to be cut to specific length.
Aluminum Hex Suspension Tubes 2.5" Coil-Over Kits Used in steering and suspension systems, hex tubes are easy to install and adjust. Available in 7/8" hex with 5/8" threads tapped RH and LH, and 1-1/8" hex with 3/4" threads tapped RH and LH, tubes are black anodized for appearance and corrosion resistance. Length
5/8" Thread
3/4" Thread
Length
3/4" Thread
7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 21" 22"
ALL56607 ALL56608 ALL56609 ALL56610 ALL56611 ALL56612 ALL56613 ALL56614 ALL56615 ALL56616 ALL56617 ALL56618 ALL56619 ALL56620 ALL56621 ALL56622
ALL56707 ALL56708 ALL56709 ALL56710 ALL56711 ALL56712 ALL56713 ALL56714 ALL56715 ALL56716 ALL56717 ALL56718 ALL56719 ALL56720 ALL56721 ALL56722
23" 24" 25" 26" 27" 28" 29" 30" 32" 34" 36" 38" 40" 42" 44"
ALL56723 ALL56724 ALL56725 ALL56726 ALL56727 ALL56728 ALL56729 ALL56730 ALL56732 ALL56734 ALL56736 ALL56738 ALL56740 ALL56742 ALL56744
Unthreaded 72" Suspension Tubes Part No.
Description
ALL56672 ..........72" x 7/8" Hex. For 5/8" Rod Ends ALL56772 ..........72" x 1-1/8" Hex. For 3/4" Rod Ends
Rod End Spacers For ALL60186 and ALL60188 trailing arm brackets. Fits between bracket and rod end to prevent binding. Sold individually. Part No.
Description
Kits fit 2" steel bodied shocks and include everything to assemble one complete shock. Slotted tops allow quick and easy spring changes. Choice of 5" or 7" adjusting sleeve. Use with 2.5" coil-over springs. Part No.
Description
AFCO/Monroe ALL64141 2.5" C/O Kit 7" ALL64161 Aluminum Sleeve 7" C/O Slotted Top ALL64170 AFCO /Monroe Bilstein ALL64143 2.5" C/O Kit 7" ALL64162 Aluminum Sleeve 5" ALL64163 Aluminum Sleeve 7" ALL64171 C/O Slotted Top Bilstein Koni ALL64146 2.5" C/O Kit 5" ALL64147 2.5" C/O Kit 7" ALL64173 C/O Slotted Top Koni Penske ALL64149 2.5" C/O Kit 7" ALL64162 Aluminum Sleeve 5" ALL64163 Aluminum Sleeve 7" ALL64174 C/O Slotted Top Penske
Description
2.5" C/O Kit 7" Aluminum Sleeve 7"
ALL64175
C/O Slotted Top Pro
QA1 2" Steel ALL64145 2.5" C/O Kit 7" ALL64165 Aluminum Sleeve 7" ALL64172 C/O Slotted Top QA1 QA1 - Alum. Smooth Body ALL64154 2.5" C/O Kit 7" ALL64167 Aluminum Sleeve 7" ALL64176 C/O Slotted Top QA1 Replacement Components ALL64180 2.5" C/O Adjusting Nut ALL64181 2.5" C/O Jam Nut ALL64182 2.5" C/O Diaper Pin
Steel Shock Quick Pins Steel quick pins have three holes and are available with or without shoulder. ALL60108 fits Allstar coil-over brackets without using a separate bushing. ALL60109 is commonly used with non-bushing type brackets but will fit Allstar brackets using a separate bushing. Part No.
Description
ALL60108 ..........Pin With Shoulder ALL60109 ..........Pin Without Shoulder
ALL60187 ..........1/2" Hole, Use With ALL60186 Bracket ALL60189 ..........3/4" Hole, Use With ALL60188 Bracket
ALL60108
2010
017-032OW10.indd 23
Part No.
Pro ALL64151 ALL64165
ALL60109
23
11/10/09 8:42:17 AM
ENGINE ACCESSORIES Round Dry Sump Tank Mounting Kit ALL36094 Mounting with front motor plate on left side of engine, bracket angles outward slightly for extra clearance, and its nonslip material protects the tank. Mounting straps and tank protectors are included.
SB Chevy Oil Restrictors Oil restrictors replace the production oil galley plugs at the rear of the block and restrict oil flow to top end, forcing more oil to bearings and cutting power loss from windage, Sold in pairs with two extra O-ring seals. Part No.
Polished Rectangular Dry Sump Tank ALL36100 Polished rectangular aluminum tank is completely washable. With removable top, three -12AN male fittings (two located near the top, one near the bottom), and two 3/8" NPT female outlets (one top, one bottom). It’s perfect for use on open wheel cars or even on dynamometers. Internally baffled tank is 5" deep x 7" wide x 19" tall with an 11 quart capacity. Three internal baffles are drilled and fastened to the lid for easy removal and cleaning.
Use main bearing spacers to install Chevy 350 crank in a 400 block.
SB Chevy Gaskets ALL87210
ALL87240 Part No.
Oil Inlet Fittings Aluminum fittings in -10 or -12 ease oil line installation. Description
Ported Oil Inlet Fitting ALL90045 Aluminum -12 x 1/2" NPT fitting is 3.500" long with two 1/8" NPT ports for plumbing valve spring oilers.
Inline Oil Temperature Tees Install in the oil return line (pump-to-tank) to adapt a probe for an oil temperature gauge. All inline tees have 1/2" NPT threads for probe fittings and 1/4" holes for mounting. Part No.
Description
ALL90040 ..........-10 ALL90041 ..........-12 ALL90042 ..........-16
SB Chevy Lifter Valley Vents ALL90065 Lifter valley vents positively vent the crankcase and eliminate oil drainthrough and windage losses. When used with valley screens, vents prevent damage from broken valvetrain components. Vents have 1/4" NPT threads and a 9/16" hex head to ease installation. Set of eight.
24
ALL87214
Description
ALL36140 ..........Clamps To 1-1/2" Dia. Tubing ALL36103 ..........Replacement Breather Element
ALL90043 ..........-10 To 1/2" NPT, 3.00" Long ALL90044 ..........-12 To 1/2" NPT, 3.00" Long ALL90046 ..........-10 To 1/2" NPT, 4.00" Long ALL90048 ..........-10 To 3/8" NPT, 3.00" Long
ALL90071
Bearing Spacer Kit ALL26124
Small capacity, spun aluminum tank will vent dry sump tank, transmission or rear end. Tank has a 1/4" NPT bung on bottom and a clamp style bracket for mounting to chassis tubing.
Part No.
Description
ALL90070 ..........Small/Big Block Chevy .055" I.D. Hole, Aluminum With Hex Head. ALL90071 ..........Small Block Chevy Bowtie Block, .055" I.D. Hole, Steel With Allen Head. Note: Not recommended for hydraulic lifter engines.
Mini Breather Tanks
Part No.
ALL90070
ALL90048
Description
ALL87210 ..........Valve Cover, Thick (Cork) ALL87212 ..........Valve Cover, Thick With Steel Core (Cork) ALL87214 ..........Valve Cover, Thick With Steel Core (Black Coated) ALL87216 ..........Valve Cover, Thick Vortec Centerbolt (Black Coated) ALL87220 ..........Oil Pan With Thick Front Seal, LH Dipstick ALL87230 ..........Water Pump To Block ALL87232 ..........Thermostat Housing ALL87236 ..........Fuel Pump ALL87238 ..........Fuel Pump Plate ALL87240 ..........Front Of Engine Set
SB Chevy Aluminum Gear Drive ALL90000 Accurate valve timing is assured with the Allstar aluminum gear drive for the small block Chevrolet V8. Plate with built-in idler gear fits under most two-piece timing covers and includes crankshaft and cam gears, needle bearing sets for the front and rear of cam gear, four camshaft dowel pins, and five camshaft gear offset bushings for precise timing adjustments. Gear drive is commonly used with KSEKSD1002 cover and will fit under most stock-type covers such as ALL90010 with slight modifications. Replacement Components Part No.
Description
ALL90007 ..........Thrust Washer Set
Timing Pointer ALL90031 Adjustable aluminum pointer for use with ALL90030. crankshaft hub
2010
017-032OW10.indd 24
11/10/09 8:42:41 AM
ENGINE ACCESSORIES SB Chevy Aluminum Crankshaft Hub ALL90030 Designed specifically for circle track use on internally balanced small block Chevys. Aluminum crank hub is significantly lighter than harmonic balancers and dramatically reduces rotating weight for quicker acceleration off the turn. Hub has 4-3/8" diameter with timing marks at 0° and from 30°-42° and three 3/8"-16 accessory threads. Weighs just one pound. Note: This is not a damper and must be balanced with rotating assembly.
Intake Bolt Kit ALL87010 Grade 8, 12-point flange clear zinc bolts are 3/8" x 1-1/8" long to fit small block Chevys and Chrysler “A” and “B” engines where clearance is insufficient for standard hex head bolts. Sets of 12 include stainless washers.
Aluminum SB Chevy Timing Cover ALL90008 Polished cast aluminum timing cover adds a nice touch to mild racing engines.
SB Chevy Fabricated NEW! Aluminum Valve Covers Tig welded covers are lightweight with a thick rail for gasket support. Covers without tubes are perfect for custom modification and use on dry sump systems. 1-3/8" breathers sold separately. Part No.
Description
ALL26170 ..........Standard Covers Without Tubes ALL26171 ..........Standard Covers With Tubes ALL26172 ..........Centerbolt Covers Without Tubes Related Components ALL36204 ..........Non-Shielded Breather, 1-3/8"
Breathers Shielded or non-shielded clamp-on breathers will fit valve cover tubes. Part No.
Description
ALL36202 ..........Non-Shielded Breather, 1-1/2" ALL36203 ..........Shielded Breather, 1-1/2" ALL36204 ..........Non-Shielded Breather, 1-3/8" ALL36205 ..........Shielded Breather, 1-3/8"
Spark Plug Wire Separator Set ALL81345 Black plastic set will fit up to 9mm plug wires. Includes two of each 2, 3 and 4-hole separators.
Titanium Distributor Hold Down ALL27506 Solid titanium hold down is very strong and only weighs 30 grams. It will keep distributor locked in place to ensure accurate timing and fits small and big block Chevy engines. Mounting hardware not included.
Chevy Distributor/Magneto Hold Down ALL27500 Aluminum hold down fits most aftermarket distributors and magnetos. An Allen head bolt prevents distributor from turning in the clamp so distributor can be removed and reinstalled without resetting the timing. Fits all Chevy V8 except 348-409. Won't fit Mallory magnetos.
High Performance Umbrella Valve Seals ALL90235 High quality .675" O.D. seals are compatible with stock diameter valve springs and require no machining for installation. For all engines with 11/32" valve stems. Set of 16.
SB Chevy Steel Valve Covers Small block Chevy steel valve covers are sold in pairs. One cover has two 1-1/2" baffled breather tubes both feature reinforced rails. Order breathers separately.
High Performance Teflon Valve Seals
Part No.
Part No.
Description
ALL26140 ..........Zinc Plated, Tubes Welded In ALL26143 ..........Unpainted, Tubes Pressed In ALL26145 ..........Zinc Plated, Tubes Pressed In ALL26147 ..........Black Painted, Tubes Pressed In
Seals have spring loaded wipers for maximum oil control. Machining is required for most installations. Set of 16. Description
ALL90240 ..........11/32" Valve Seals, .620" Seal O.D., .531" Mach. Tool Guide O.D. ALL90241 ..........11/32" Valve Seals, .600" Seal O.D., .500" Mach. Tool Guide O.D. ALL90242 ..........3/8" Valve Seals, .620" Seal O.D., .531" Mach. Tool Guide O.D. ALL90244 ..........5/16" Valve Seals, .620" Seal O.D., .531" Mach. Tool Guide O.D.
Valve Cover Gaskets
Rocker Arm Nut Kits
Part No.
Sets include 16 matched rocker arm nuts. Replacements for Allstar and many other stud girdles.
Description
ALL87210 ..........Valve Cover, Thick (Cork) ALL87212 ..........Valve Cover, Thick With Steel Core (Cork) ALL87214 ..........Valve Cover, Thick With Steel Core (Black Coated) ALL87216 ..........Valve Cover, Thick Vortec Centerbolt (Black Coated)
Part No.
Description
ALL90206 ..........SB Chevy 3/8" ALL90207 ..........SB Chevy 7/16" ALL90208 ..........BB Chevy 7/16"
2010
017-032OW10.indd 25
25
11/10/09 8:43:17 AM
ENGINE ACCESSORIES SB Chevy Exhaust Block Off Plates NEW!
ENGINE ACCESSORIES Stud Girdles CNC-machined from aluminum, girdles weigh just 6 lbs. Countersunk cap screws provide more valve cover clearance. Girdles will not fit .550" wide rocker arms. Locks included. Part No.
ALL34212
Description
ALL90200 ..........SB Chevy Girdles For 3/8" Studs ALL90202 ..........SB Chevy Girdles For 7/16" Studs ALL90204 ..........BB Chevy Girdles For 7/16" Studs Replacement Nuts ALL90201 ..........3/8" ALL90203 ..........7/16" SB Chevy, BB Chevy Intake ALL90205 ..........7/16" BB Chevy Exhaust ALL90201 ALL90203 ALL90205
Valve Lash Wrenches Allstar Valve Lash Wrenches save precious time and make valve adjustment easy. No more fumbling with two separate wrenches. Available for Jesel, T&D and other poly-lock style rocker assemblies. Part No.
Description
ALL96400 ..........7/16" Adjuster Wrench, 1/8" Allen Wrench, Jesel Assemblies ALL96405 ..........7/16" Adjuster Wrench, 5/32" Allen Wrench, Jesel Assemblies ALL96401 ..........1/2" Adjuster Wrench, 3/16" Allen Wrench, T&D Assemblies ALL96402 ..........9/16" Adjuster Wrench, 3/16" And 7/32" Allen Wrenches, For Stud Girdle Assemblies ALL96403 ..........5/8" Adjuster Wrench, 3/16" And 7/32" Allen Wrenches, Poly Lock
Feeler Gauges
ALL34214
Aluminum block off plates seal standard or spread port SB Chevy exhaust ports during engine storage or repairs. Plates protect against moisture, dust and dirt. Part No.
Description
ALL34210 ..........Standard - Individual Plates, 1/8" ALL34212 ..........Standard - 1-Piece Design, 1/16" ALL34214 ..........Spread Port - 1-Piece Design, 1/16"
ENGINE COOLING ACCESSORIES Radiator Honeycomb ALL30158 Honeycomb screen mounts to front of radiator to protect from rocks and debris. Secure directly to radiator using ALL30085 mounting kit, sold separately. 19" x 26" x 1/2" thick.
Higher cooling system pressure raises the boiling point of coolant and reduces the risk of overheating. All caps are compatible with recovery type systems to keep the cooling system full of coolant and reduce air trapped in the system. Description
ALL96420 ..........Straight ALL96421 ..........Angled
ALL30124 ..........16 PSI Small Diameter Stant ALL30125 ..........19-21 PSI Small Diameter Stant ALL30134 ..........19-21 PSI Stant ALL30130 ..........19-21 PSI Stant With Lever ALL30135 ..........21-25 PSI Stant ALL30131 ..........21-25 PSI Stant With Lever ALL30127 ..........22-24 PSI Hexagon ALL30136 ..........22-24 PSI Hexagon Stant ALL30137 ..........22-24 PSI Octagon Stant ALL30128 ..........28-32 PSI Stant ALL30129 ..........29-31 PSI Hexagon
Aluminum Sprint Motor Plates NEW!
Radiator Hoses
Part No.
Description
NEW!
High Pressure Radiator Caps
Part No.
Use in engine assembly to check connecting rod side clearance, piston ring end gap, spark plug gap and valve lash. Gauges have Metric and SAE sizing designations etched in each blade. Choose straight or angled sets.
ALL34210
ALL30125
ALL30124
ALL30131
Two-ply coolant hose is flexible and adapts to a variety of applications. Abrasion resistant cover. Part No. ALL38128
ALL38129 ALL38130
Front motor plates are offered in one and two piece designs. One piece version mounts using the lower front mounting holes. Two piece set uses the lower front mount holes and the water pump mounting holes. ALL38128/38129 plates are 3/8" thick and have 191/2" center-to-center chassis mounting holes with bushings to allow for minimum engine flex and help with weight transfer. Universal one piece plate is not drilled for chassis mounts but is staked for a 191/2" center-to-center chassis, 1/4" thick x 20-1/2" overall. Part No.
Description
ALL38128 ..........1 Pc. Mount With Bushings ALL38129* ........2 Pc. Mount With Bushings ALL38130 ..........Universal Mount *Has a built in mount for a Barnes Oil Filter Bracket BAR8930 (pg. 53)
26
Description
Part No.
Description
1-1/2" Dia. Upper Hose 1-3/4" Dia. Lower Hose ALL30200 ................. 12" Long ALL30220 ...........11" Long ALL30202 ................. 14" Long ALL30222 ...........13-1/2" Long ALL30204 ................. 15-1/2" Long ALL30224 ...........16-1/2" Long ALL30206 ................. 17" Long ALL30226 ...........19" Long ALL30208 ................. 20" Long ALL30228 ...........23-1/2" Long ALL30210 ................. 22" Long ALL30212 ................. 25" Long Hose Clamps ALL18330 ...................1/2" OD, 2-Pack ALL18330-10 .............1/2" OD, 10-Pack ALL18336 ...................2-1/4" OD, 2-Pack ALL18334 ALL18336-10 .............2-1/4" OD, 10-Pack ALL18332 ...................1" OD, 2-Pack ALL18332-10 .............1" OD, 10-Pack ALL18338 ...................2-1/2" OD, 2-Pack ALL18342 ALL18338-10 .............2-1/2" OD, 10-Pack ALL18334 ...................2" OD, 2-Pack ALL18334-10 .............2" OD, 10-Pack ALL18340 ...................3-1/2" OD, 2-Pack ALL18342 ...................4-1/2" OD, 2-Pack
2010
017-032OW10.indd 26
11/10/09 8:43:52 AM
FUEL SYSTEM ACCESSORIES Compact Electric Fuel Pump ALL40320
Fuel Filter Brackets
High flow, low pressure electric fuel pump has 5/16" inlet/outlet and flows 18 GPH at 4.0 PSI, 5.5 PSI maximum. Popular minisprint pump includes a rubber-padded mounting bracket and two heavy duty hose clamps. Rated 12 volt/5 amps.
Brackets mount Allstar inline aluminum fuel filters to round or square tubing and flat surfaces. Flush mount bracket fastens to flat panels like a frame rail or firewall. A locking set screw holds filter in place. Brackets for round and square tubing clamp with caps secured by Allen head screws. Sold individually with hardware. Part No.
Description
ALL40227 ..........1-3/8" Round Tubing ALL40228 ..........1-1/2" Round Tubing ALL40229 ..........1-1/4" Round Tubing ALL40230 ..........1-3/4" Round Tubing ALL40232 ..........2" x 2" Square Tubing ALL40234 ..........2" x 3" Rectangle Tubing ALL40228 ALL40235 ..........Flush Mount
Sprint Fuel Pressure Gauge ALL40330 NEW! Fuel pressure indicator gauge allows preadjustment of the high speed, secondary and main valve opening pressures using a compressed air source. Gauge can be mounted directly to the wall or tool box. 4-1/2" diameter dial has a 0-160 PSI range.
ALL40232
ALL40235
Funnels
Shockproof Pressure Gauges Gauges are 1-1/2" diameter with stainless steel cases and bezels. Available glycerin-filled, dry, or engine turned with brass internal parts and 1/8" NPT connections on back. Description
Glycerin Filled
Dry Type
Engine Turned
0-15 PSI 0-30 PSI 0-60 PSI 0-100 PSI 0-1,500 PSI NOS
ALL80200 ALL80202 ALL80204 ALL80206 ALL80208
ALL80210 – ALL80214 ALL80216 ALL80218
ALL80220 ALL80222 ALL80224 ALL80226 –
Inline Aluminum Fuel Filters Anodized, high flow inline filters are available with no element or with a stainless or paper element. Choose correct bracket and mount to chassis tubing along fuel line. Filter elements are 8" long and fit in a 9" housing. Overall length is 12" and outside diameter is 2". Filter flows enough fuel for any race car. Fuel Filters With Element (Blue Anodized) Part No.
Description
With Paper Element ALL40216 -8 Ends ALL40217 -10 Ends ALL40240 -12 Ends
Part No.
Description
With Stainless Element ALL40218 -8 Ends ALL40219 -10 Ends ALL40242 -12 Ends
Fuel Filters Without Element (Black Anodized) Part No.
Description
ALL40244 ..........-8 Ends ALL40245 ..........-10 Ends ALL40246 ..........-12 Ends Replacement Parts ALL40220 ..........Paper Element (10 Micron) Outlet ALL40222 ..........Stainless Element (63 Micron) ALL40224 ..........-8 End Cap ALL40226 ..........-10 End Cap ALL40225 ..........-12 End Cap ALL40236 ..........Spring Inlet ALL40237 ..........O-Ring 2-Pack Filter Fact: Filter element must be installed with the closed end and the spring toward the INLET end of housing. The open end faces the OUTLET.
ALL40109
ALL40100
ALL40102
ALL40106
Heavy duty plastic funnels are perfect for topping off fuel or other liquids. Available in several sizes. Part No.
Description
ALL40100 ..........6 Qt. Funnel With Brass Screen, Most Common Fuel Funnel ALL40102 ..........2 Qt. Funnel With Brass Screen ALL40104 ..........1 Pint Funnel With Brass Screen ALL40106 ..........4 Oz. Mini Funnels, Sold In Pairs (One With And One Without Screen) ALL40109 ..........Funnel Fill Adapter (Reduces Outlet Size)
Extended Funnels Funnels with extensions work great for filling fluids in hard to reach areas. Standard funnel is useful for power steering, and automatic transmissions. Funnel with flexible extension is ideal for differentials and manual transmissions. Built in hang tab allows funnel to be secured to body or frame for hands free filling. Part No.
Description
ALL40107
ALL40108
ALL40107 ..........1 Pint Funnel With Flexible Extension ALL40108 ..........1 Pint Extended Funnel
Plastic Drum Pump ALL40114 NEW! Hand siphon drum pump dispenses or transfers low viscosity fluids from a 55-gallon drum. Self priming bulb delivers up to 5 gallons per minute.
Trey Smith
Photo: Jim Fisher
2010
017-032OW10.indd 27
ALL40104
27
11/10/09 8:44:51 AM
BRAKE SYSTEMS & ACCESSORIES Brake Caliper Bolt Retainer Kit ALL42050 NEW! Aluminum constructed kit places lower plate (with retainer clip) under the caliper mounting bolts. The upper plate (with hex hole ends) clips into place and slips over bolt heads to prevent them from turning. Includes 5/8" hex head bolts.
Plastic Brake Ducts ALL42143 Duct directs outside air to brakes, oil coolers or the driver. 3" O.D. with centered clear outlets.
Master Cylinder Remote Reservoirs High-impact plastic remote reservoirs simplify brake bleeding, especially when master cylinder is mounted low in the chassis. Available with single or dual outlet and may be connected to master cylinder with a 5/16" hose. Part No.
Description
Nylon Brake Line Kit ALL48030 Quickly plumb any race car using an Allstar nylon brake line kit. Kit extends from the master cylinder to the caliper and includes 35 feet of 3/16" line, compression ends, unions, tees and 1/8" NPT fittings. Race proven for years. Not for street use. Part No.
Description
Replacement Line ALL48026 ..........10 Ft. ALL48027 ..........50 Ft. ALL48028 ..........100 Ft. Replacement Brass Fittings For Nylon Brake Line Kit ALL48032 ..........1/8" NPT Straight ALL48033 ..........1/8" NPT 90° ALL48034 ..........3/16" Male Union ALL48032 ALL48034 ALL48036 ALL48035 ..........3/16" Male Tee ALL48036 ..........3/16" Captured End Caps, 10-Pack ALL50040 ..........Caliper Fitting 10mm-1.5 Male To 1/8"NPT Female 2-Pk. (Not Included In Kit. Needed For Use With Metric GM Calipers To Nylon Brake Line)
Coiled Tubing NEW! Coiled tubing works great for building custom length brake lines without unions. Tubing is easily cut and flared to desired length. Coiled line does not include flare nuts (sold separately).
ALL42045 ..........Single Outlet ALL42046 ..........Dual Outlet
Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8" NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall.
Part No.
Description
Length
ALL48040 ALL48308 ALL48318
3/16" Standard Zinc 3/16" Stainless 1/4" Stainless
25 Ft. 20 Ft. 20 Ft.
Brake Shut-Off Valve ALL48010
Steel Brake Line
Valve has 1/8" NPT inlet and outlet and is rated at 2,000 PSI. Use Allstar ALL50120 fitting for 3/16" inverted flare brake line. Dimensions: 1/2" W x 1-3/4" L x 1-9/16" H.
3/16" steel brake line is available in lengths from 8" to 72" for plumbing brake systems. Standard galvanized zinc coating.
Swivel Head Brake Pressure Gauge ALL11020 Gauge screws in the bleeder screw in most aftermarket brake calipers and measures brake pressure. Swivel head positions the gauge for easy viewing. Part No.
Description
ALL11022 ..........Adapter To Use Brake Pressure Gauge With GM Metric Calipers
ALL11022
Deluxe Nylon Brake Line Kits NEW! Deluxe kits feature push lock fittings to ease installation. Kits include 30 feet of line and fittings. Not for street use. Part No.
Description
ALL48018 ..........Kit For Use Without Brake Gauges ALL48019 ..........Kit For Use With Brake Gauges Replacement Fittings ALL48020 ..........1/8" NPT Male To Push Lock Hose ALL48021 ..........1/8" NPT Female To Push Lock Hose ALL48022 ..........Plastic T - All To Push Lock Hose ALL48023 ..........Plastic T - (2) Push Lock, (1) 1/8" NPT ALL50184 ..........1/8"NPT Male Union, 4-Pack
Double Flare Tool ALL11015 Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45 degrees, the most common flare used in custom length brake and fuel lines. Includes instructions and a plastic storage case.
28
Part No.
Description
ALL48048 ...........8" ALL48050 ...........12" ALL48052 ...........20" ALL48054 ...........30"
Part No.
Description
ALL48056...........40" ALL48058...........51" ALL48060...........60" ALL48062...........72"
Powder Coated Brake Lines Steel powder coated lines easily bend without flaking. Six colors to choose from, each 3/16" diameter. Available in 5' (straight) or 25' (coiled) lengths. Brake lines do not include flare nuts (sold separately). Black Part No.
Silver Part No.
5' Straight Brake Line ALL48064 ALL48065 25' Coiled Brake Line – ALL48042
Red Part No.
Blue Part No.
Green Part No.
Yellow Part No.
ALL48066
ALL48067
ALL48068
ALL48069
ALL48043
ALL48044
ALL48045
ALL48046
Tubing Cutters Cut plastic, aluminum, copper or steel tubing without distorting or crushing. Standard cutter works with tubing from 1/8" up to 1-1/8" and has wide rollers for even tracking of cutter wheel, built in reamer for cleaning inside of tubing and an extra cutting wheel. Mini cutter can cut tubing from 1/8" to 5/8" in tight areas. Part No.
Description
ALL11010 ..........Mini ALL11011 ..........Standard ALL11011 ALL11010
2010
017-032OW10.indd 28
11/10/09 8:45:41 AM
BRAKE SYSTEMS & ACCESSORIES Braided Steel Lines A full selection of braided steel lines in lengths from 6" to 48" and a choice of three different ends. The inner hose is Teflon and compatible with all brake fluids. Braided stainless steel outer covering resists abrasion and corrosion. Ideal for use where bending and flexing occur. More durable than rubber hose. Choose from -3 line with -3 or -4 hose ends and -4 line with -4 hose ends in straight, 45 degree or 90 degree configurations.
-3 Hose
-4 Hose
With Two -3 Straight Ends
With Two -4 Straight Ends
Part No.
Description
Part No.
Description
Part No.
Description
Part No.
Description
ALL48099 ALL48100 ALL48101 ALL48102 ALL48103
6" 9" 12" 15" 18"
ALL48104 ALL48105 ALL48106 ALL48108
21" 24" 30" 36"
ALL48159 ALL48160 ALL48161 ALL48162 ALL48163 ALL48164
6" 9" 12" 15" 18" 21"
ALL48165 ALL48166 ALL48167 ALL48168 ALL48169 ALL48170
24" 30" 32" 36" 42" 48"
-3 Hose -4 Hose
With One -3 45° End And One -3 Straight End Part No.
Description
Part No.
Description
ALL48112 ALL48113
15" 18"
ALL48115
24"
With One -4 45° End And One -4 Straight End Part No.
Description
Part No.
Description
ALL48172 ALL48173
15" 18"
ALL48175
24"
-3 Hose -4 Hose
With One -3 90° End And One -3 Straight End Part No.
ALL48119* ALL48120* ALL48121* ALL48122 ALL48123 NEW *NEW
Description
Part No.
Description
6" 9" 12" 15" 18"
ALL48124 ALL48125 ALL48126 ALL48128 ALL48129
21" 24" 30" 36" 42"
With One -4 90° End And One -4 Straight End Part No.
ALL48179* ALL48180* ALL48181* ALL48182 ALL48183 ALL48184 NEW *NEW
Description
Part No.
Description
6" 9" 12" 15" 18" 21"
ALL48185 ALL48186 ALL48187 ALL48188 ALL48189
24" 30" 32" 36" 42"
-3 Hose With One -4 Straight End And One 10mm Banjo Part No.
-4 Hose
Description
ALL48195 ..........24"
With One -4 Straight End And One 10mm Banjo Part No.
Description
ALL48194 ..........24"
-3 Hose With Two -4 Straight Ends Part No.
Description
Part No.
Description
ALL48132 ALL48133
15" 18"
ALL48134 ALL48135
21" 24"
-3 Hose
TECH TIP The -3 line with the more popular -4 hose ends provides the higher brake pressure of the -3 line. Lines are available straight-to-straight, or straight-to-90 degree.
Actual Size Reference
With One -4 90° End And One -4 Straight End Part No.
Description
ALL48153 ..........18"
2010
017-032OW10.indd 29
29
11/10/09 8:46:21 AM
BRAKE SYSTEMS & ACCESSORIES Fittings We carry a large selection of quality brake fittings to meet all brake plumbing needs. Quantity per pack listed below, as each part number varies. Part No.
Description
Qty.
ALL50000 ALL50001 ALL50010 ALL50011 ALL50020 ALL50021 ALL50029 ALL50030 ALL50032 ALL50035 ALL50036 ALL50040 ALL50061 ALL50062 ALL50063 ALL50066 ALL50067 ALL50068 ALL50070 ALL50072 ALL50076 ALL50077 ALL50080 ALL50082 ALL50100 ALL50101 ALL50120 ALL50121 ALL50125 ALL50127 ALL50130 ALL50136 ALL50137 ALL50138 ALL50150 ALL50180 ALL50182 ALL50183 ALL50184 ALL50200 ALL50300 ALL50310
Steel Adapter -3 To 1/8" NPT Wilwood Caliper Steel Adapter -4 To 1/8" NPT Wilwood Caliper 45° Steel Fitting, 1/8" NPT To -3 45° Steel Fitting, 1/8" NPT To -4 Tall 90° Steel Fitting, 1/8" NPT To -3 Tall 90° Steel Fitting, 1/8" NPT To -4 3/8"-24 x -3 Caliper (Fitting And Crush Washer) 3/8"-24 x -4 Caliper (Fitting And Crush Washer) 7/16"-20 x -4 Caliper (Fitting And 0-Ring) 90° Steel Fitting, 7/16" SAE To -4 10mm - 1.50 x -4 Caliper (Fitting & Crush Washer) 10mm - 1.50 Male To 1/8" Female Caliper Fitting 3/8" Banjo To -4 7/16" Banjo To -3 7/16" Banjo To -4 10mm Banjo To -4 10mm Banjo To -3 10mm Banjo To -4 3/8" SAE Banjo Bolt 7/16" SAE Banjo Bolt 10mm - 1.25 Banjo Bolt 10mm - 1.50 Banjo Bolt 7/16" Crush Washer 10mm Or 3/8" Crush Washer Steel Adapter -3 To 3/16" Brake Line Steel Adapter -4 To 3/16" Brake Line 1/8" NPT To 3/16" Inverted Flare 1/8" NPT To 1/4" Inverted Flare 1/8" NPT To 3/16" Inverted Flare 90° 1/8" NPT Female To 3/16" Inverted Flare 3/16" Inverted Flare Union 3/16" Inverted Female Tee 3/16" Inverted Flare Tee With 1/8" NPT 1/8" NPT Tee Gauge Fitting Brake Line Clip 1/8" NPT Bleeder Screw 1/8" NPT Brass Plug 3/16" NPT Inverted Flare Plug 1/8" NPT Male Union 1/8" Female Pipe To -4 Gauge Fitting -3 Tube Nut For 3/16" Steel Brake Line -3 Tube Sleeve For 3/16" Steel Brake Line
2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 10 10 2 2 4 4 4 4 4 2 1 2 4 4 4 4 4 1 4 4
Secure brake line adapters with bolt-on or weld-on brackets. Bolt-on bracket has two 3/16" holes. Description
ALL60029
ALL60030
TECH TIP Braided Steel Line
Mounting Tab ALL60029 Or ALL60030
30
ALL50040
ALL50035
ALL50063
ALL50066
ALL50076
ALL50077
ALL50150
ALL50101
ALL50182
ALL50130
ALL50136 ALL50137
ALL50200
ALL50020
ALL50032
ALL50036
ALL50061 ALL50068
ALL50062 ALL50067
ALL50070
ALL50072
ALL50080 ALL50082
ALL50100
ALL50120
ALL50125
ALL50138
ALL50300
ALL50180
ALL50310
Steel brake couplings offer quick changes without having to bleed brakes. Specialty couplers prevent spillage at disconnect and will not allow air into the system. Female 1/8" NPT.
ALL60029 ..........Bolt-On, 2-Pack ALL60030 ..........Weld-On, 4-Pack
Hookup Reference
ALL50029 ALL50030
ALL50021
ALL50127
ALL50010 ALL50011
ALL50001
Steel Brake Line Quick Disconnect Kit ALL50215 NEW!
Brake Line Adapter Mounting Brackets Part No.
ALL50000
Brake Line Clip ALL50150 Rigid Brake Line
-3AN Or -4AN To 3/16" Brake Line Adapter ALL50100 (-3AN) ALL50101 (-4AN)
Aluminum Brake Line Quick Disconnects NEW! Compact aluminum brake couplings offer quick changes without having to bleed brakes. Specialty couplers prevent spillage at disconnect and will not allow air into the system. Part No.
Description
ALL50210 ..........Male -3 Brake Line ALL50211 ..........Female -3 Brake Line
ALL50211
ALL50210
Assembled
2010
017-032OW10.indd 30
11/10/09 8:46:38 AM
TIRE & WHEEL ACCESSORIES Foam Mud Plugs
Schrader Valves ALL44065
An economical way to prevent mud build-up inside racing wheels. Foam discs, in 5" and 3" thicknesses, install quickly and easily in 15" diameter wheels. Allstar logo is imprinted on one side.
Inflating tires through quick disconnects mounted in rim eliminates an extra valve stem. Valves work with Allstar Performance center reliefs and other popular plastic or aluminum quick disconnect fittings. Sold in pairs.
Part No.
Color
5" Mud Plugs ALL44150 ..........Black ALL44151 ..........Red ALL44152 ..........Blue ALL44153 ..........Orange ALL44154 ..........Yellow ALL44155 ..........Purple 3" Mud Plugs ALL44190 ..........Black ALL44191 ..........Red ALL44192 ..........Blue ALL44193 ..........Orange ALL44194 ..........Yellow ALL44195 ..........Purple
Brass Valve Stem ALL44134 Brass bolt-in valve stem resists cutting during contact.
Snap-In Rubber Valve Stem Economical rubber valve stem pulls through wheel for easy installation. Fits a 5/8" hole. Part No.
REAR END ACCESSORIES
Tape Measures
Timken Wheel Bearing Grease
Ten foot long tapes are ideal for measuring tire diameters and checking stagger. Part No.
Description
ALL44136 ..........Rubber Valve Stem, 4-Pack ALL44136-50 ....Rubber Valve Stem, 50-Pack
Part No. ALL10112
Description
ALL10111 ..........Economy ALL10112 ..........Deluxe
Description
ALL78240 ................. 14 Oz. Cartridge Standard ALL78241 ................. 16 Oz. Tub Standard ALL78242 ................. 14 Oz. Cartridge High Temp. Synthetic
ALL10111
Torque Tube Belt ALL10181
Stagger Gauge ALL10116 Measures tire diameter and automatically converts it to circumference. Strong tubular gauge will not flex and will provide accurate, consistent stagger measurements every time. Gauge measures from 65" to 115" in 1/4" increments.
Universal strap keeps torque tube stabilized and centered in case of coupler or tube failure. Black belt fits all torque tube and chassis combinations.
Quick Change Cover Gaskets Valve Core Tool ALL44030
Part No.
Easily remove and install new valve cores. Base of handle has a machined pattern to aid with grip. Ergonomically designed and crafted from stainless steel. Measures 3" overall length.
Tire Relief Pre-Setter Gauges
Quick Change Side Bell O-Ring ALL72054 Quick Change Cover Nuts ALL72060 Aluminum nuts are pre-drilled for safety wire to prevent nuts from working loose and causing leaks. Nuts have 3/8"-16 threads and are sold in packages of ten.
Description
ALL44080 ..........0-30 Lb. Pre-Setter Gauge ALL44082 ..........0-60 Lb. Pre-Setter Gauge Replacement Components ALL44081 ..........30 Lb. Gauge ALL44083 ..........60 Lb. Gauge
Quick Change Cover Lock Kit ALL72062
Wheel Disconnects Fit 5/8" dia. valve stem hole for use with center reliefs and Schrader (Fill) valve (ALL44065). Part No.
Description
ALL44060 ..........Plastic, 4-Pack ALL44061 ..........Plastic, Each ALL44062 ..........Aluminum, 4-Pack ALL44063 ..........Aluminum, Each ALL44061
Securely locks cover in place for quick removal and re-installation. Unique clip releases with a quick pull and eliminates safety wire. Aluminum nuts have 3/8"-16 threads. Kit includes two machined aluminum plates, four steel clips and four aluminum nuts with snap rings. Cover not included. Replacement Parts Part No.
Description
ALL99118 ................. Cover Nuts With Snap Rings, 10-Pack ALL99119 ................. Snap Rings, 10-Pack ALL99120 ................. Clips, 2-Pack ALL99138 ................. Replacement Lock Plates For ALL72062, 1-Pair
ALL44063
2010
017-032OW10.indd 31
ALL72052
Replacement O-ring for Winters quick change.
An accurate method for presetting tire reliefs. A constant flow of air to the relief duplicates the air pressure against the relief in the tire. Just attach air chuck to one end of the gauge and the relief valve hose to the other end. Available with 0-30 PSI or 0-60 PSI gauge, both can be recalibrated to zero if dropped. Part No.
Description
ALL72050 ..........Paper ALL72051 ..........Thin With Steel Core NEW! ALL72052 ..........Thick With Steel Core NEW!
31
11/10/09 8:47:27 AM
ELECTRICAL SYSTEM ACCESSORIES Switch Panels
REAR END ACCESSORIES Clamp-On Breathers Breathers are easily mounted to either 1-1/2" or 1-3/4" tubing. Breathers are 1" tall and 1-3/8" in diameter. Great for use on transmissions, differentials, etc. Bottom fitting is 1/4"NPT. Black anodized finish. Part No.
Description
ALL80140/ ALL80150
ALL36106 ..........Breather For 1-1/2" Tubing ALL36107 ..........Breather For 1-3/4" Tubing ALL36103 ..........Replacement Filter Only
ALL80141
ALL80142
ALL80146
ALL80160
Designed with the racer in mind, panels feature well marked switches and indicator lights. Units are completely wired for easy installation and include detailed instructions. Choose from panels with standard or weatherproof switches.
Drain Pan ALL40112 Round drain pan has molded in handles and pour spout. Made from chemical and solvent resistant plastic. 13-1/2" x 11" x 4", 7 quart capacity.
Part No.
Description
ALL80164 ALL80140 ..........Panel Without Light ALL80162 ALL80141 ..........Panel With Flip-Up Cover ALL80142 ..........Panel With Light ALL99066 ALL80146 ..........Panel With Two Switches ALL80150 ..........Magneto Ignition Panel Panels With Weatherproof Switches ALL80160 ..........Panel Without Light ALL99068 ALL80162 ..........Switch Panel, One Switch, Panel With Light ALL80164 ..........Switch Panel, Two Switch, Panel With Two Switches Replacement Components ALL99066 ..........Ignition Indicator Light Red ALL99146 ..........Accessory Indicator Light Green NEW! ALL99069 ALL99067 ..........Switch For Ignition And Accessory ALL99068 ..........Switch Cover ALL99069 ..........Starter Button ALL99073 ..........Weatherproof Switch For Ignition & Accessory ALL99067
Quick-Change Drain Pan ALL14166 Aluminum drain pan is handy when changing quick-change gears. Built-in perforated shelf holds gears and allows lube to drain into pan. Pan is 10-1/4" wide, 12" long and 3-3/4" deep.
Drain Pan ALL14171 Molded plastic basin and lid slide together to prevent spilling of fluid. A crank handle is included for manual operation. A length of straight hex shaft is also included for use with an electric drill. 16" square x 7" tall.
MSD Box Mount ALL81330 Box mount provides a quick release method for replacing MSD ignition boxes. Kit includes aluminum box mount, (4) quick turn fasteners with springs and (8) 1/8" aluminum rivets.
Gear Tote Box ALL14164 Neat plastic quick change gear tote box organizes extra gear sets and keeps them clean.
NEW!
Battery Charging Posts ALL76139 Posts mount through a body panel to provide remote access to battery terminals for quick, easy, battery charging. Color coded caps are a safety feature to prevent crossed cables.
ELECTRICAL SYSTEM ACCESSORIES Gauges
Part No.
Description
ALL76140 ..........Red Post Only ALL76141 ..........Black Post Only
Quick Connect Battery Charging Posts ALL80095
ALL80096
ALL80097
ALL80098
2-5/8" lighted mechanical gauges. Part No.
Description
ALL80095 ..........Oil Pressure Gauge, 0-100 PSI ALL80096 ..........Water Temperature Gauge, 140-280째F. ALL80097 ..........Oil Temperature Gauge, 140-280째F. ALL80098 ..........Fuel Pressure Gauge, 0-15 PSI
Part No.
Crimping Pliers
Toggle extensions increase the length of toggle switches in Allstar switch panels and other switches with a standard type end. Push-on extensions are 1-7/8" long, offered in red or black and sold as a 2 pack. Description
ALL80167 ..........Red ALL80168 ..........Black
32
Pro style pliers have a unique ratcheting feature to perform professional crimps on 22-10 gauge standard and reinforced terminals. Standard pliers strip insulation from solid and stranded wire, crimp solderless and ignition connectors, and even cut #4 to #10 screws. Part No.
ALL80167
Description
ALL76300 ..........Red ALL76310 ..........Black
Toggle Extensions
Part No.
Two-piece, color-coded connectors make safe, out-of-car connection to battery charger quick and easy. Female ends connect to battery cables and pass through a body panel. Male ends of connectors fit on battery charger cables. Shafts are tapered for tight, secure connections.
ALL80168
Description
ALL76220 ..........Pro Crimp Pliers ALL76222 ..........Standard Crimp Pliers
ALL76220 ALL76222
2010
017-032OW10.indd 32
11/10/09 8:48:04 AM
CHEMICALS, ADDITIVES & CLEANERS Oil Eater
ELECTRICAL SYSTEM ACCESSORIES Battery Quick Disconnects Disconnects provide a connection for battery charging, or for quick battery changes during a race. Prevent accidental reverse polarity. Choose from 50 or 175 amp ratings. Sold in pairs and include cable terminals. Part No.
Description
ALL76320 ..........50 Amp Gray Disconnects, 1-Pair ALL76322 ..........175 Amp Red Disconnects, 1-Pair Replacement Components ALL76321 ..........6 Gauge Terminals For ALL76320, 1-Pair ALL76323 ..........2 Gauge Terminals For ALL76322, 1-Pair
ALL78213
Wire Terminal Kit ALL76224 A 100-piece terminal kit with a generous supply of the most commonly used connectors for automotive wiring. A sturdy plastic case with divided compartments helps keep connectors organized.
Each Kit Includes 22-16ga.
16-14ga.
12-10ga.
(10) Butt Connectors (8) Ring Terminals #6 (8) Ring Terminals #8 – – –
(10) Butt Connectors (10) Ring Terminals #10 (8) Ring Terminals 1/4" (7) Female Blade (7) Male Blade (7) Spade
(10) Butt Connectors (8) Ring Terminals #10 (7) Ring Terminals 3/8" – – –
ALL78211
ALL78212
The cleaner/degreaser that really works! Clean shop floors, degrease engine bays or trailer floors. Offered in a 32 oz. spray bottle or 1 gallon container. Convenient foam gun sprayer is the quickest and easiest way to dispense Oil Eater. Fill sprayer with Oil Eater, connect to a garden hose, select the desired mixture setting from 12:1 to 128:1 and spray. The sprayer creates a foaming action which sticks to surfaces. Part No.
Description
ALL78213 ..........32 Oz. Spray Bottle ALL78211 ..........1 Gallon Container ALL78212 ..........Foam Gun Sprayer
Plexus Cleaner ALL78200 Plexus cleaner is formulated to clean and protect clear and colored plastics. Unlike conventional waxes, Plexus cleans as it polishes. Actually seals the pores of plastic, making small scratches less visible. Dries without streaks or smears. Excellent for polycarbonate windows on race cars. Ground Shipment Only
Universal Wire Connectors
Novus Plastic Cleaner And Polish
Molded connectors include a male and female end, joined by a loop of 16 gauge primary wire which may be cut to length. Useful for switch and gauge panels or accessories that are disconnected frequently.
Novus plastic polish will restore the finish of plastics, including polycarbonate windows and windshields. Offered in three formulas.
Part No.
Cleaner 1 – ALL78201
Description
ALL76231 ..........One Wire With 12" Loop ALL76232 ..........Two Wire With 12" Loop ALL76233 ..........Three Wire With 48" Loop ALL76234 ..........Four Wire With 48" Loop ALL76235 ..........Five Wire With 48" Loop
Gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static. 8 oz. spray bottle.
Polish 2 – ALL78202
APPAREL & DISPLAY MATERIAL Allstar Gloves NEW! General purpose gloves protect hands from everyday abuse in the shop or at the racetrack. Lightweight, elastic weave material with reinforced palm and fingers allows mobility and unrestricted use. Part No.
Description
ALL99940 ..........Medium ALL99941 ..........Large ALL99942 ..........X-Large
Allstar Apron ALL99962 NEW! Black cloth apron has pockets to keep tools close at hand. Reverse apron to place pockets on the inside when grinding tires. Adjustable strap allows one size to fit all.
Removes fine scratches, haziness, and abrasions from most plastics. With repeated use, polish 2 will restore faded and discolored plastics. 8 oz. squeeze bottle.
Polish 3 – ALL78203 Removes heavy scratches and abrasions from most acrylic surfaces. Requires both #1 and #2 polishes for final finishing. 8 oz. squeeze bottle.
Mud-X Concentrate ALL78230 Mix concentrate with up to ten quarts of water to produce a coating that prevents mud, dirt, oil, rubber and exhaust residue from sticking to body panels. Safe for metal, plastic, rubber, and painted surfaces. One quart container.
2010
033-048OW10.indd 33
33
11/10/09 8:55:51 AM
All Items On This Page Are Ground Shipment Only
CHEMICALS, ADDITIVES & CLEANERS Mud-X Cleaner ALL78232
Castrol SRF Brake Fluid ALL78115
Cleans and shines plastic, polycarbonate, chrome, fiberglass, paint, vinyl and leather and leaves an invisible coating that protects surfaces and repels dirt, dust, fingerprints, smudges and bugs. Spray it on and wipe it off. Excellent anti-fog coating for helmet shields.
Castrol SRF synthetic racing brake fluid has a wet boiling point of 518°F (270°C) which exceeds DOT 3 and 4 standards. Do not mix Castrol SRF and other brake fluids, as this will reduce the benefits. Sold in 1 liter bottle (33.8 oz.)
Fogging Oil ALL78220
Magic Tire Conditioner ALL78102 NEW!
Spray aerosol lubricant (with special additives) into the intake and spark plug holes to coat and lubricate the cylinders, valves and valve seats. Prevents horsepower-robbing corrosion and eliminates scuffing at start-up after periods of storage. May be used in all 2- or 4-cycle, carbureted or fuel injected gasoline engines in cars, trucks, motorhomes, ATV’s, etc. Sold in 12 oz. cans.
Fuel Fragrances Fuel fragrances can be added to most types of fuels including methanol, nitromethane, gasoline and also may be used in 2-cycle mixtures. Available in many scents in a resealable 4 oz. bottle – enough to treat 30-55 gallons of alcohol or 20 gallons of gasoline. Mixes clear with fuel. Part No.
Description
ALL78124 ..........Cherry ALL78126 ..........Grape ALL78127 ..........Banana ALL78128 ..........Fruit Punch ALL78129 ..........Pina Colada ALL78130 ..........Root Beer ALL78131 ..........Bubble Gum ALL78132 ..........Cotton Candy ALL78133 ..........Raspberry ALL78134 ..........Tangerine
Apply race day or mid-week with great results. Minimizes tire sealing. Better restarts and sniffer proof.
Fast Track ALL78103 Chemically treats and softens race tires to increase traction. Great for qualifying, Fast Track works on asphalt and dirt tires. One gallon treats four tires. Sold by the gallon. Best on Hoosiers. Very detectable, will make tires very soft.
Hot Lap Tire Softener Increase tire life by 20% over other softeners and reduce lap times by 2-3 tenths. Hot Lap relies on a special formula and will provide instant results. Formulated to pass tire “sniffer” tests. Also available in a 13 oz. spray can with valve stem hose to pump Hot Lap directly inside tire. Part No.
Upper Lube A high temperature cylinder lube for alcohol engines. Upper Lube extends engine life and protects and lubricates fuel system. Mixes completely – won’t separate and leaves no varnish residue. 16 oz. bottle treats 55 gallons of alcohol. Part No.
Description
ALL78100 ..........Upper Lube ALL78120 ..........Upper Lube With Cherry Fragrance ALL78122 ..........Upper Lube With Grape Fragrance
AP PRF Brake Fluid ALL78116 Developed for extreme, high temperature racing conditions (dry boiling point of 608°F). Exceeds DOT 4 specifications. Sold in 16.9 oz. bottle.
AP 600 Hi-Temp Racing Brake Fluid ALL78108 Designed for extreme, high temperature racing conditions with a dry boiling point in excess of 572°F. Exceeds DOT 3 standards. 16.9 oz. bottle.
Description
ALL78101 ..........One Gallon Hot Lap, Quick For 200 Laps ALL78107 ..........One Pint Hot Lap ALL78109 ..........13 Oz. Spray Can Hot Lap
CTS Tire Softener ALL78104 Chemically treats and softens race tires to increase traction. Sniffer-proof treatment makes old tires soft again. One gallon container.
Competitive Edge Tire Conditioner ALL78105 Chemically treats and softens race tires to increase traction without making tires greasy. Apply race day or night before on new or old tires, can be used on the inside or outside. One gallon container treats 4 to 6 tires.
Track Claw Tire Strengthener Strengthens the rubber and will work on all tires. Undetectable. Reduces lap times 2-3 tenths. Part No.
Description
ALL78110 ..........180°-220°F Tire Temps, 1 Gallon ALL78111 ..........Up To 150°F Tire Temps, 1 Gallon
34
2010
033-048OW10.indd 34
11/10/09 8:56:47 AM
200 Series Swivel Hose Ends Reusable aluminum hose swivel design offers 360° of adjustability and the single nipple provides superior sealing. “Smooth bend” technology promotes exceptional flow and performance. Hose Size
Straight
30°
45°
60°
90°
120°
150°
180°
-4 -6 -8 -10 -12 -16
AAA00004 AAA00006 AAA00008 AAA00010 AAA00012 AAA00016
– AAA03006 AAA03008 AAA03010 AAA03012 AAA03016
AAA04504 AAA04506 AAA04508 AAA04510 AAA04512 AAA04516
– AAA06006 AAA06008 AAA06010 AAA06012 AAA06016
AAA09004 AAA09006 AAA09008 AAA09010 AAA09012 AAA09016
– AAA01206 AAA01208 AAA01210 AAA01212 AAA01216
– AAA01506 AAA01508 AAA01510 AAA01512 AAA01516
– AAA01806 AAA01808 AAA01810 AAA01812 AAA01816
Tee Adapter With NPT On Run
AN To NPT Adapters Part No.
Straight AAA81603 AAA81604 AAA81644 AAA81662 AAA81606 AAA81666 AAA81668 AAA81607 AAA81608
AN Size NPT Size
-3 -4 -4 -6 -6 -6 -6 -8 -8
1/8" 1/8" 1/4" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8"
45° AAA82303 AAA82304 AAA82344 AAA82306 AAA82366 AAA82368 AAA82307 AAA82308
-3 -4 -4 -6 -6 -6 -8 -8
1/8" 1/8" 1/4" 1/4" 3/8" 1/2" 1/4" 3/8"
90° AAA82203 AAA82204 AAA82244 AAA82262 AAA82206 AAA82266 AAA82268 AAA82207 AAA82208
-3 -4 -4 -6 -6 -6 -6 -8 -8
1/8" 1/8" 1/4" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8"
Female Swivel Coupler
Part No.
AN Size
AAACPL03 .........-3 AAACPL04 .........-4 AAACPL06 .........-6 AAACPL08 .........-8 AAACPL10 .........-10 AAACPL12 .........-12 AAACPL16 .........-16
Part No.
AN Size NPT Size
Straight AAA81688 AAA81611 AAA81610 AAA81609 AAA81613 AAA81612 AAA81614 AAA81615
45° AAA82309 AAA82311 AAA82310 AAA82313 AAA82312 AAA82314 AAA82315 AAA82316
90° AAA82288 AAA82208-12 AAA82209 AAA82210 AAA82211 AAA82213 AAA82212 AAA82214 AAA82215 AAA82216
-8 -10 -10 -10 -12 -12 -12 -16
1/2" 3/8" 1/2" 3/4" 1/2" 3/4" 1" 3/4"
-8 -10 -10 -10 -12 -12 -16 -16
45° AAACPL82303 ...... -3 AAACPL82304 ...... -4 AAACPL82306 ...... -6 AAACPL82308 ...... -8 AAACPL82310 ...... -10 AAACPL82312 ...... -12 AAACPL82316 ...... -16
NPT Size
AAA82603 AAA82604 AAA82606 AAA82608
-3 -4 -6 -8
1/8" 1/8" 1/4" 3/8"
AN Size
AAA82103 .........-3 AAA82104 .........-4 AAA82106 .........-6 AAA82108 .........-8 AAA82110 .........-10 AAA82112 .........-12 AAA82116 .........-16
90° AAACPL903 .......-3 AAACPL904 .......-4 AAACPL906 .......-6 AAACPL908 .......-8 AAACPL910 .......-10 AAACPL912 .......-12 AAACPL916 .......-16
Part No.
AN Size
AN Size
AAA91902 AAA91906 AAA91912 AAA91914 AAA91915 AAA91920 AAA91923
-4 -6 -8 -10 -10 -12 -16
-3 -4 -6 -6 -8 -10 -12
AAA9500403 AAA9500604 AAA9500806 AAA9501008 AAA9501208 AAA9501210 AAA9501612
Female Size Male Size
-4 -6 -8 -10 -12 -12 -16
-3 -4 -6 -8 -8 -10 -12
Tee Coupler With Swivel On Run
Tee Coupler With Swivel On Leg
Part No.
Part No.
AN Size
AN Size
AAACPL82403 .......... -3 AAACPL82404 .......... -4 AAACPL82406 .......... -6 AAACPL82408 .......... -8 AAACPL82410 .......... -10 AAACPL82412 .......... -12 AAACPL82416 .......... -16
AAACPL82603 .......... -3 AAACPL82604 .......... -4 AAACPL82606 .......... -6 AAACPL82608 .......... -8 AAACPL82610 .......... -10 AAACPL82612 .......... -12 AAACPL82616 .......... -16
2010
033-048OW10.indd 35
1/8" 1/8" 1/4" 3/8" 3/8" 1/2" 3/4"
Part No.
AN Size
AAA82403 .........-3 AAA82404 .........-4 AAA82406 .........-6 AAA82408 .........-8 AAA82410 .........-10 AAA82412 .........-12 AAA82416 .........-16
AN Size
AN Size
-3 -4 -6 -6 -8 -10 -12
Flare Seat Reducer
AN Tee Part No.
AN Size
AN Union Reducer
AN 90° Union Part No.
Part No.
AAA82503 AAA82504 AAA82506 AAA82507 AAA82508 AAA82510 AAA82512
AN Size
AAA81503 ........-3 AAA81504 ........-4 AAA81506 .........-6 AAA81508 .........-8 AAA81510 .........-10 AAA81512 .........-12 AAA81516 .........-16
1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" 1" 3/4" 1"
AN Size Part No.
AN Size
Part No.
Female To Male Swivel Coupler
Part No.
Part No.
AN Union
1/2" 3/8" 1/2" 3/4" 3/4" 1" 3/4" 1"
-8 -8 -10 -10 -10 -12 -12 -12 -16 -16
Tee Adapter With NPT On Leg
35
11/10/09 8:57:32 AM
AN Adapters Female Tee
90° Bulkhead
Part No.
Part No.
AN Size
AAA93803 .........-3 AAA93804 .........-4 AAA93806 .........-6 AAA93808 .........-8 AAA93810 .........-10 AAA93812 .........-12 AAA93816 .........-16
AN Size
AAA83303 .........-3 AAA83304 .........-4 AAA83306 .........-6 AAA83308 .........-8 AAA83310 .........-10 AAA83312 .........-12 AAA83316 .........-16
Bulkhead Tee On Leg
AN Caps
Part No.
Part No.
AN Size
AAA83403 .........-3 AAA83404 .........-4 AAA83406 .........-6 AAA83408 .........-8 AAA83410 .........-10 AAA83412 .........-12 AAA83416 .........-16
AN Size
AAA92903 .........-3 AAA92904 .........-4 AAA92906 .........-6 AAA92908 .........-8 AAA92910 .........-10 AAA92912 .........-12 AAA92916 .........-16
Straight Bulkhead Part No.
AN Size
AAA83203 .........-3 AAA83204 .........-4 AAA83206 .........-6 AAA83208 .........-8 AAA83210 .........-10 AAA83212 .........-12 AAA83216 .........-16
45° Bulkhead Part No.
AN Size
AAA83703 .........-3 AAA83704 .........-4 AAA83706 .........-6 AAA83708 .........-8 AAA83710 .........-10 AAA83712 .........-12 AAA83716 .........-16
Straight Bulkhead Reducer Part No.
Long Side
Short Side
AAA83213 AAA83217
-12 -16
-16 -12
Bulkhead Tee On Run Part No.
AN Size
AAA80403 .........-3 AAA80404 .........-4 AAA80406 .........-6 AAA80408 .........-8 AAA80410 .........-10 AAA80412 .........-12 AAA80416 .........-16
Hard Line Adapters Tube Nut
Tube Sleeve
Part No.
Part No.
AN Size
AAA81803 .........-3 AAA81804 .........-4 AAA81806 .........-6 AAA81808 .........-8 AAA81810 .........-10 AAA81812 .........-12
NPT Thread Adapters Female NPT Coupler Part No.
NPT Size
AAA91001 .........1/8" AAA91002 .........1/4" AAA91003 .........3/8" AAA91004 .........1/2" AAA91006 .........3/4" AAA91008 .........1" AAA91010 .........1-1/4"
AN Size
Male Female
1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4"
1/8" 1/4" 1/8" 3/8" 1/4" 1/8" 1/2"
Female NPT Tee
Male NPT Coupler
Part No.
Part No.
NPT Size
AAA91701 .........1/8" AAA91702 .........1/4" AAA91703 .........3/8" AAA91704 .........1/2" AAA91706 .........3/4" AAA91708 .........1"
Part No.
AN Size
AAA92403 .........-3 AAA92404 .........-4 AAA92406 .........-6 AAA92408 .........-8 AAA92410 .........-10 AAA92412 .........-12 AAA92416 .........-16
AN Size
AAA81403 .........-3 AAA81404 .........-4 AAA81406 .........-6 AAA81408 .........-8 AAA81410 .........-10 AAA81412 .........-12 AAA81416 .........-16
Nylon Washers Part No.
AN Size
Qty.
AAA250406 AAA250408 AAA250410 AAA250412
-6 -8 -10 -12
2 2 2 1
Part No.
AN Size
Fyre Jacket
Qty.
Part No.
I.D.
5 5 5 5 5 5 5
AAA290375 AAA290625 AAA290750 AAA290875 AAA291100 AAA291187
3/8" 5/8" 3/4" 7/8" 1" 1-3/8"
AAA211403 -3 AAA211404 -4 AAA211406 -6 AAA211408 -8 AAA211410 -10 AAA211412 -12 AAA211416 -16
NPT Reducer AAA91201 AAA91202 AAA91203 AAA91204 AAA91205 AAA91206 AAA91207
AN Port Plugs
Part No.
Buna “N” O-Rings
AAA81903 .........-3 AAA81904 .........-4 AAA81906 .........-6 AAA81908 .........-8 AAA81910 .........-10 AAA81912 .........-12
Part No.
Bulkhead Nut
Fits Hose Length
-3/-4 -6 -8 -10 -12 -16
36" 36" 36" 36" 36" 36"
NPT Plug Part No.
NPT Size
AAA93202 .........1/8" AAA93203 .........1/4" AAA93204 .........3/8" AAA93205 .........1/2" AAA93206 .........3/4" AAA93207 .........1"
NPT Size
AAA91101 .........1/8" AAA91102 .........1/4" AAA91103 .........3/8" AAA91104 .........1/2" AAA91106 .........3/4"
Cody Darrah
36
2010
033-048OW10.indd 36
11/12/09 2:45:20 PM
AQP Racing Hose AQP racing hose is light, flexible, and its stainless steel cover resists corrosion and abrasion. Hose can operate at higher temperatures for longer periods of time and is compatible with petroleum or synthetic lubricants, hydrocarbon fuels and engine coolants. Sold in 3, 6, 10, 15 and 20 foot lengths. Aeroquip is the only performance plumbing supplier to manufacture their own hose and fittings.
Hose Size
I.D.
O.D.
3 Ft. Length
6 Ft. Length
Bulk Firesleeve And Support Clamps Listed in the right columns of the chart are the part numbers for firesleeve and support clamps for each size hose. Firesleeve protects hose from fire damage and can be used as an insulator to keep fuel lines cool. Support clamps are the professional method to secure Aeroquip hose to chassis, frame rails, etc.
AQP Racing Hose 10 Ft. Length
15 Ft. Length
Firesleeve Part No.
20 Ft. Length
Support Clamp Part No.
-04 .22" .44" AERFCA0403 AERFCA0406 AERFCA0410 AERFCA0415 AERFCA0420 AERFCS09XX* AERFCM3482 -06 .34" .55" AERFCA0603 AERFCA0606 AERFCA0610 AERFCA0615 AERFCA0620 AERFCS11XX* AERFCM3484 -08 .44" .65" AERFCA0803 AERFCA0806 AERFCA0810 AERFCA0815 AERFCA0820 AERFCS12XX* AERFCM3485 -10 .56" .80" AERFCA1003 AERFCA1006 AERFCA1010 AERFCA1015 AERFCA1020 AERFCS14XX* AERFCM3487 -12 .69" .94" AERFCA1203 AERFCA1206 AERFCA1210 AERFCA1215 AERFCA1220 AERFCS18XX* AERFCM3488 -16 .88" 1.15" AERFCA1603 AERFCA1606 AERFCA1610 AERFCA1615 AERFCA1620 AERFCS20XX* AERFCM3536 -20 1.13" 1.41" AERFCA2003 AERFCA2006 AERFCA2010 AERFCA2015 AERFCA2020 AERFCS24XX* AERFCM3538 *Notes: Last two digits for Firesleeve dictate length. For example AERFCS0903 is a 3' length. Firesleeve available in 3", 6', and 10' lengths only.
Reusable Fittings For AQP Racing Hose Aeroquip steel or anodized aluminum reusable fittings are engineered to match Aeroquip hose tolerances to provide excellent performance and service. High quality one-piece fitting has no braze joints to break or leak. When methanol and mixtures are used, corrosion can occur. Check the fittings regularly for signs of corrosion and flush system after use.
Size
Steel Swivel
Straight -4 AERFCM1011 -6 AERFCM1075 -8 AERFCM1076 -10 – -12 – -16 – -20 – 30° Elbow -6 – -8 – -10 – -12 – -16 – 45° Elbow -4 AERFCM1021 -6 – -8 – -10 – -12 – -16 – -20 – 60° Elbow -6 – -8 – -10 – -12 – -16 –
Nickel-Plated Aluminum Swivel
Anodized Aluminum Swivel
Anodized Aluminum Non-Swivel
– AERFCE1012 AERFCE1013 AERFCE1014 AERFCE1015 – –
– AERFCM1012 AERFCM1013 AERFCM1014 AERFCM1015 AERFCM1016 AERFCM1017
– – – – – – –
– – – – –
AERFCM4072 AERFCM4073 AERFCM4074 AERFCM4075 AERFCM4076
– – – – –
– AERFCE4022 AERFCE4023 AERFCE4024 AERFCE4025 – –
– AERFCM4022 AERFCM4023 AERFCM4024 AERFCM4025 AERFCM4026 –
– AERFCM1022 AERFCM1023 AERFCM1024 AERFCM1025 AERFCM1026 AERFCM1027
– – – – –
AERFCM4082 AERFCM4083 AERFCM4084 AERFCM4085 AERFCM4086
– – – – –
Size
Steel Swivel
Nickel-Plated Aluminum Swivel
Anodized Aluminum Swivel
Anodized Aluminum Non-Swivel
90° Elbow -4 AERFCM1031* – – – -6 – AERFCE4032 AERFCM4032 AERFCM1032 -8 – AERFCE4033 AERFCM4033 AERFCM1033 -10 – AERFCE4034 AERFCM4034 AERFCM1034 -12 – AERFCE4035 AERFCM4035 AERFCM1035 -16 – – AERFCM4036 AERFCM1036 -20 – – – AERFCM1037 120° Elbow -6 – – AERFCM4042 AERFCM1042 -8 – – AERFCM4043 AERFCM1043 -10 – – AERFCM4044 AERFCM1044 -12 – – AERFCM4045 AERFCM1045 -16 – – AERFBM4046# – 150° Elbow -6 – – AERFCM4052 AERFCM1052 -8 – – AERFCM4053 AERFCM1053 -10 – – AERFCM4054 AERFCM1054 -12 – – AERFCM4055 AERFCM1055 -16 – – AERFBM4056# – 180° Elbow -6 – – AERFCM4062 AERFCM1062 -8 – – AERFCM4063 AERFCM1063 -10 – – AERFCM4064 AERFCM1064 -12 – – AERFCM4065 AERFCM1065 -16 – – AERFBM4066# – *Signifies A Non-Swivel Fitting. #Sold As Bulk. Many fittings are also available in bulk. Simply replace the FCM prefix with FBM followed by the desired part number.
TECH TIP Dash Size/Fractional Equivalent Guide SAE 37° Dash Size
Fractional Equivalent
-02 -03 -04 -05 -06
1/8" 3/16" 1/4" 5/16" 3/8"
SAE 37° Fractional Dash Size Equivalent
-08 -10 -12 -14 -16
1/2" 5/8" 3/4" 7/8" 1"
Through Hole Dimensions
SAE 37° Fractional Dash Size Equivalent
-20 -24 -32
1-1/4" 1-1/2" 2"
Dash Size
SAE 37°
Dash Size
SAE 37°
-3 -4 -6 -8 -10
.120" .170" .300" .390" .480"
-12 -16 -20 -24 -32
.610" .840" 1.080" 1.310" 1.780"
2010
033-048OW10.indd 37
37
11/10/09 8:58:36 AM
StartLite Hose And Fittings StartLite hose is 45% lighter than conventional high performance assemblies. Hose has a patented AQP elastomer inner tube and Nomex outer cover. Combine with aluminum crimp-style fittings for substantial weight savings. Use for fuel, lube, coolant and air systems. Sizes -04 through -16. Crimp with Aeroquip ProCrimp FT1380-115 Assembly Machine. May also be used with reusable fittings. Hose Dash Size
I.D.
O.D.
Maximum Operating Pressure
-04 .22" .43" 200 -06 .34" .55" 200 -08 .44" .64" 200 -10 .56" .80" 200 -12 .69" .93" 200*/100** -16 .88" 1.15" 200*/100** *Lightweight crimp fittings. **Reusable fittings.
Minimum Bend Radius
Weight Per Ft.
Vacuum Service
6 Ft. Length
10 Ft. Length
15 Ft. Length
20 Ft. Length
2.00 2.50 3.50 4.00 4.50 5.50
.05 lbs. .08 lbs. .11 lbs. .14 lbs. .16 lbs. .20 lbs.
20 20 20 20 20 20
AERFCU0406 AERFCU0606 AERFCU0806 AERFCU1006 AERFCU1206 AERFCU1606
AERFCU0410 AERFCU0610 AERFCU0810 AERFCU1010 AERFCU1210 AERFCU1610
AERFCU0415 AERFCU0615 AERFCU0815 AERFCU1015 AERFCU1215 AERFCU1615
AERFCU0420 AERFCU0620 AERFCU0820 AERFCU1020 AERFCU1220 AERFCU1620
Lightweight Crimp Aluminum Fittings For AQP Racing Or StartLite Hose Straight Dash Size
Crimp Swivel
90° Elbow
150° Elbow
Dash Size
Dash Size
Crimp Swivel
Crimp Swivel
-4 ......................AERFBM4211 -6 ......................AERFBM4212 -8 ......................AERFBM4213 -10 ....................AERFBM4214 -12 ....................AERFBM4215 -16 ....................AERFBM4216 -20 ....................AERFBM4217
-6 ......................AERFBM4232 -8 ......................AERFBM4233 -10 ....................AERFBM4234 -12 ....................AERFBM4235 -16 ....................AERFBM4236
-6 ......................AERFBM4252 -10 ....................AERFBM4254 -12 ....................AERFBM4255
45° Elbow
120° Elbow
180° Elbow
Dash Size
Dash Size
Dash Size
Crimp Swivel
-6 ......................AERFBM4222 -8 ......................AERFBM4223 -10 ....................AERFBM4224 -12 ....................AERFBM4225 -16 ....................AERFBM4226
Crimp Swivel
Crimp Swivel
-8 ......................AERFBM4263 -10 ....................AERFBM4264 -12 ....................AERFBM4265
-6 ......................AERFBM4242 -8 ......................AERFBM4243 -10 ....................AERFBM4244 -12 ....................AERFBM4245 -16 ....................AERFBM4246
Note: Lightweight crimp fittings must be assembled with ProCrimp crimp machines (pg. 45). Select AQP lightweight crimp fittings for ultimate weight savings. Select AQP reusable fittings for field serviceability.
TECH TIP
TECH TIP
Thread Size Chart The following chart is intended as a quick reference guide for thread size by dash size.
Dash Size
N.P.T.F.
-02 -03 -04 -05 -06 -07 -08 -10 -12 -14 -16 -20 -24 -32
1/8-27" – 1/4-18" – 3/8-18" – 1/2-14" – 3/4-14" – 1-11-1/2" 1-1/4-11-1/2" 1-1/2-11-1/2" 2-11-1/2"
38
N.P.S.M. SAE 45° Approximate Diameter Automotive Refrigeration
1/8-27" – 1/4-18" – 3/8-18" – 1/2-14" – 3/4-14" – 1-11-1/2" 1-1/4-11-1/2" 1-1/2-11-1/2" 2-11-1/2"
5/16-24" 3/8-24" 7/16-20" 1/2-20" 5/8-18" 11/16-24" 3/4-16" 7/8-14" 1-1/16-14" – – – – –
S.A.E. 37° AN
S.A.E. O-Ring Boss
P.T.T. 30° Automotive
S.A.E. Inverted Flare
Tubing O.D. Size
5/16-24" 3/8-24" 7/16-20" 1/2-20" 9/16-18" – 3/4-16" 7/8-14" 1-1/16-12" 1-3/16-12" 1-5/16-12" 1-5/8-12" 1-7/8-12" 2-1/2-12"
5/16-24" 3/8-24" 7/16-20" 1/2-20" 9/16-18" – 3/4-16" 7/8-14" 1-1/16-12" 1-3/16-12" 1-5/16-12" 1-5/8-12" 1-7/8-12" 2-1/2-12"
– – – – – – – – – – 1-5/16-14" 1-5/8-14" 1-7/8-14" 1-1/2-12"
5/16-24" 3/8-24" 7/16-20" 1/2-20" 5/8-18" 1-1/16-18" 3/4-18" 7/8-18" 1-1/16-16" – – – – –
1/8" 3/16" 1/4" 5/16" 3/8" – 1/2" 5/8" 3/4" – 1 1-1/4" 1-1/2" 2"
2010
033-048OW10.indd 38
11/10/09 8:58:48 AM
Socketless Hose And Fittings AQP Socketless hose and fittings are easily assembled without tools, saving time and effort. Socketless hose is offered in blue or black and may be used for gasoline, alcohol, oils, air and water. Hose Dash Size
I.D.
O.D.
Max. Oper. Pressure
Min. Bend Radius
Vacuum Service
3 Ft. Length
6 Ft. Length
10 Ft. Length
15 Ft. Length
20 Ft. Length
25 Ft. Length
250 250 250 250 250
3.00" 3.00" 5.00" 6.00" 7.00"
28" 28" 28" 18" 18"
AERFCV0403 AERFCV0603 AERFCV0803 AERFCV1003 –
AERFCV0406 AERFCV0606 AERFCV0806 AERFCV1006 –
AERFCV0410 AERFCV0610 AERFCV0810 AERFCV1010 AERFCV1210
– AERFCV0615 AERFCV0815 AERFCV1015 –
– AERFCV0620 AERFCV0820 AERFCV1020 AERFCV1220
AERFCV0425 AERFCV0625 AERFCV0825 AERFCV1025 –
250 250 250 250
3.00" 5.00" 6.00" 7.00"
28" 28" 18" 18"
– – – –
– – – –
– – – –
AERFCN0615 AERFCN0815 AERFCN1015 AERFCN1215
AERFCN0620 AERFCN0820 AERFCN1020 AERFCN1220
– – – –
Blue Socketless Hose -04 .25" .49" -06 .38" .62" -08 .50" .75" -10 .63" .91" -12 .75" 1.03" Black Socketless Hose -06 .38" .62" -08 .50" .75" -10 .63" .91" -12 .75" 1.03"
AERFCM1512
AERFCE1512
Socketless Straight Fittings Hose Size
Aluminum
Brass Male Pipe Bulk Pipe Thread Size
Nickel Plated Aluminum
AERFBM1200 -4 – – AERFBM1201 AERFBM1207 -6 AERFCM1512 AERFCE1512 AERFBM1202 AERFBM1206 -8 AERFCM1513 AERFCE1513 AERFBM1203 -10 AERFCM1514 AERFCE1514 AERFBM1204 -12 AERFCM1515 AERFCE1515 AERFBM1205 † Fittings mate with both 37° and 45° male flares.
1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"
Brass Male Flare
Straight -6 to -8 Brass Female Flare
Brass Swivel
AERFBM1444 AERFBM1231†
Hose Size
–
AERFBM1233†
– –
AERFBM1234† AERFBM1225
Part No.
Thread Size
-6 AERFBM1232† 3/4"-16 † Fitting mates with both 37° (AN) and 45° male flares.
AERFBM1445 AERFBM1222
Socketless Fitting Assembly Tool AERFBM3632
AERFCM1532
AERFCE1532
AERFBM1441
Hand-held tool makes quick and easy work of installing fittings into FBV, FCV or FCN socketless hose. Works on hose sizes -04, -06 and -08.
Socketless Elbow Fittings Hose Size
Aluminum
Nickel Plated Aluminum
Steel Swivel
AERFCM1522 AERFCM1523 AERFCM1524 AERFCM1525
AERFCE1522 AERFCE1523 AERFCE1524 –
AERFBM1439 AERFBM1440 – –
– AERFCM1532 AERFCM1533 AERFCM1534 AERFCM1535
– AERFCE1532 AERFCE1533 AERFCE1534 AERFCE1535
AERFBM1441 AERFBM1442 AERFBM1443 – –
AERFCM1542 AERFCM1543 AERFCM1544 AERFCM1545
– – – –
– – – –
AERFCM1552 AERFCM1553 AERFCM1554 AERFCM1555
– – – –
– – – –
AERFCM1562 AERFCM1563 AERFCM1564 AERFCM1565
– – – –
– – – –
45° -6 -8 -10 -12 90° -4 -6 -8 -10 -12 120° -6 -8 -10 -12 150° -6 -8 -10 -12 180° -6 -8 -10 -12
Hose Assembly Lube AERFBM3553 A specially compounded lubricant for use in hose assembly work. Suitable for hand or machine assembly. One pint container.
Vise Jaw Inserts AERFCM3661 Keep Aeroquip fittings looking good even after assembly. Magnetic backed, aluminum inserts may be quickly set up and will firmly hold the hex of the fitting during assembly, without marring the finish. A horizontal pocket the entire length of the inserts holds braided hose in place, making straight cuts fast and simple.
Replacement Aluminum Crushwashers For use with banjo fittings and carburetor adapters. Five per package. Part No.
Dash Size
AERFCM3642 .......... -3 AERFCM3513 ........... -4 AERFCM3514 ........... -6 AERFCM3515 ........... -8 AERFCM3516 ........... -10 AERFCM3517 ........... -12
2010
033-048OW10.indd 39
39
11/10/09 8:58:59 AM
AN Flare Adapters Aluminum Part No.
Steel Part No.
B “A” Dash Size
“B” Dash Size
Aluminum Or Steel Flare Union AERFCM2050 AERFCM2750 -3 AERFCM2051 AERFCM2751 -4 AERFCM2052 AERFCM2756 -6 AERFCM2053 AERFCM2759 -8 AERFCM2054 AERFCM2761 -10 AERFCM2055 AERFCM2763 -12 AERFCM2056 AERFCM2765 -16 Aluminum Or Steel Union Reducer AERFCM2048 AERFCM2749 -4 AERFCM2156 – -6 AERFCM2049 AERFCM2757 -8 AERFCM2160 AERFCM2758 -8 AERFCM2188 – -10 AERFCM2162 – -10 AERFCM2163 AERFCM2760 -10 AERFCM2189 – -12 AERFCM2165 – -12 AERFCM2166 – -12 AERFCM2167 AERFCM2762 -12 AERFCM2169 – -16 AERFCM2170 AERFCM2764 -16 Aluminum Female Flare Swivel AERFCM2914 – -4 AERFCM2915 – -6 AERFCM2916 – -8 AERFCM2917 – -10 AERFCM2918 – -12 Aluminum Or Steel O-Ring Boss To Male 37° AERFCM2953 AERFCM2957 -10 AERFCM2954 AERFCM2958 -10 AERFCM2955 AERFCM2959 -12 AERFCM2956 AERFCM2960 -12
AN Flare Adapters (continued) Part No.
-3 -4 -6 -8 -10 -12 -16
A
B
-3 -4 -4 -6 -4 -6 -8 -4 -6 -8 -10 -10 -12
A
B
-4 -6 -8 -10 -12
“B” Dash Size
Aluminum 45° Male To Female Swivel Flare AERFCM3148 -6 -6 AERFCM3149 -8 -8 AERFCM3150 -10 -10 AERFCM3151 -12 -12 Aluminum 90° Male To Female Swivel Flare AERFCM3155 -6 -6 AERFCM3156 -8 -8 AERFCM3157 -10 -10 AERFCM3158 -12 -12 Aluminum 45° Female Flare Swivel AERFCM2971 -6 -6 AERFCM2972 -8 -8 AERFCM2973 -10 -10 AERFCM2974 -12 -12 Aluminum 90° Female Flare Swivel AERFCM2978 -6 -6 AERFCM2979 -8 -8 AERFCM2980 -10 -10 AERFCM2981 -12 -12
A
B A
B A
B A
B
Low Profile 90° O-Ring Boss To Male 37°
A B
-10 -12 -12 -16
“A” Dash Size
Part No.
"A" Dash Size
"B" Dash Size
AERFCM2263
-12
-12
B
A
A
Direct To Pipe/Port Fittings Bulk Part No.
Part No.
“A” Dash Size
“B” Dash Size
Aluminum 90° Elbow Union AERFCM2186 -3 -3 AERFCM2119 -4 -4 AERFCM2120 -6 -6 AERFCM2190 -8 -8 AERFCM2191 -12 -12 Aluminum Union Tee AERFCM2060 -3 -3 AERFCM2061 -4 -4 AERFCM2062 -6 -6 AERFCM2063 -8 -8 AERFCM2064 -10 -10 AERFCM2065 -12 -12 Aluminum Tee With Female On The Bottom AERFCM2281 -4 -4 AERFCM2282 -6 -6 AERFCM2283 -8 -8 AERFCM2284 -10 -10 AERFCM2285 -12 -12 Aluminum Female Flare Tee AERFCM2173 -4 -4 AERFCM2174 -6 -6 AERFCM2175 -8 -8 AERFCM2176 -10 -10 AERFCM2177 -12 -12
40
A
“C” Dash Size
– – – – – -3 -4 -6 -8 -10 -12 -4 -6 -8 -10 -12
B B
C
A
B
Hose Size
Thread Size
Aluminum Swivel Male Pipe 90° ORB Fitting AERFCM1343 -6 3/8" NPT AERFCM1344 -8 1/2" NPT AERFCM1345 -12 3/4" NPT Aluminum Swivel S.A.E. 37° (JIC/AN) 45° ORB Fitting AERFCM1352 -12 7/8"-14 (-10) AERFCM1353 -12 1-1/16"-12 (-12) 90° ORB Fitting AERFCM1358 -10 7/8"-14 (-10) AERFCM1359 -12 7/8"-14 (-10) AERFCM1360 -12 1-1/16"-12 (-12)
TECH TIP Actual Thread Sizes AN Fittings
A
C B
-4 -6 -8 -10 -12
A
C
2010
033-048OW10.indd 40
11/10/09 8:59:13 AM
AN Flare Bulkhead Adapters Aluminum Part No.
Steel Part No.
AN Tube Fittings
B
Aluminum Part No.
“A” “B” Dash Size Dash Size
Aluminum Or Steel Bulkhead Union AERFCM2769 AERFCM2770 -3 -3 AERFCM2071 AERFCM2771 -4 -4 AERFCM2072 AERFCM2774 -6 -6 AERFCM2073 AERFCM2775 -8 -8 AERFCM2074 AERFCM2776 -10 -10 AERFCM2075 AERFCM2777 -12 -12 AERFCM2076 – -16 -16 Aluminum Or Steel 45˚ Elbow Bulkhead Union AERFCM2893 – -3 -3 AERFCM2127 – -4 -4 AERFCM2128 AERFCM2783 -6 -6 – AERFCM2784 -8 -8 – AERFCM2785 -10 -10 Aluminum Or Steel 90˚ Elbow Bulkhead Union AERFCM2799 AERFCM2790 -3 -3 AERFCM2081 AERFCM2791 -4 -4 AERFCM2082 AERFCM2793 -6 -6 AERFCM2083 AERFCM2794 -8 -8 AERFCM2084 AERFCM2795 -10 -10 AERFCM2085 – -12 -12 AERFCM2086 – -16 -16
A
B
A
B A C
Aluminum Part No.
Steel Part No.
“A” Dash Size
“B” Dash Size
Aluminum Or Steel Bulkhead Run Tee AERFCM2815 AERFCM2809 -3 -3 AERFCM2117 – -4 -4 AERFCM2118 – -6 -6 AERFCM2180 – -8 -8 Aluminum Or Steel Bulkhead Tee AERFCM2808 AERFCM2800 -3 -3 AERFCM2091 AERFCM2801 -4 -4 AERFCM2092 – -6 -6 AERFCM2093 – -8 -8
Aluminum Part No.
Steel Part No.
“C” Dash Size
-3 -4 -6 -8 -3 -4 -6 -8
“A” Dash Size
No. Per Pack
-3 -4 -6 -8 -10 -12 -16
2 2 2 1 1 1 1
Aluminum Or Steel Locknut AERFCM3556 AERFCM2095 AERFCM2099 AERFCM2096 AERFCM2100 AERFCM2098 AERFCM2103 AERFCM3584 AERFCM2104 AERFCM3585 AERFCM2105 AERFCM3586 AERFCM2106 –
A
B
Steel Part No.
“A” Alum. No. Steel No. Dash Size Per Pkg. Per Pkg.
Aluminum Or Steel AN Tube Cap* AERFCM3751 AERFCM3479 -3 2 6 AERFCM3752 AERFCM3480 -4 2 6 AERFCM3740 AERFCM3602 -6 1 2 A AERFCM3741 AERFCM3603 -8 1 2 AERFCM3742 AERFCM3604 -10 1 2 AERFCM3743 AERFCM3605 -12 1 2 AERFCM3744 AERFCM3566 -16 1 1 – AERFCM3567 -20 – 1 Aluminum Or Steel AN Tube Nut † AERFCM3554 AERFCM3591 -3 6 1 AERFCM3555 AERFCM3570 -4 6 1 – AERFCM3571 -5 – 1 A AERFCM3675 AERFCM3572 -6 2 1 AERFCM3676 AERFCM3573 -8 2 1 AERFCM3677 – -10 2 1 AERFCM3678 – -12 2 1 Aluminum Or Steel AN Tube Sleeve † AERFCM3669 AERFCM3667 -3 6 6 AERFCM3670 AERFCM3668 -4 6 6 – AERFCM3679 -5 2 2 AERFCM3671 AERFCM3680 -6 2 2 AERFCM3672 AERFCM3681 -8 2 2 AERFCM3673 – -10 2 2 A AERFCM3674 – -12 2 2 *Aluminum tube caps are two-piece. AN numbers for configuration reference. †For use with aluminum tubing. Tube nut and sleeve are to be used together.
AN Plugs
C
Aluminum Part No.
A B
A
Steel Part No.
Aluminum Or Steel Flare Plugs AERFCM3712 AERFCM3701 AERFCM3713 AERFCM3702 AERFCM3714 AERFCM3703 AERFCM3715 AERFCM3704 AERFCM3716 AERFCM3705 AERFCM3717 AERFCM3706 AERFCM3718 AERFCM3707 Aluminum O-Ring Boss Plug AERFCM3722 – AERFCM3723 – AERFCM3724 – AERFCM3725 – AERFCM3726 – AERFCM3727 –
“A” Dash Size
-3 -4 -6 -8 -10 -12 -16
A
-3 -4 -6 -8 -10 -12
A
B
A
B
C
Steel Flare To Braze Steel Part No.
“A” Dash Size
“B” Dash Size
Steel Reducer 37˚ Flare Swivel/37° Flare AERFCM2408 -6 -4 AERFCM2409 -8 -4 AERFCM2410 -8 -6 AERFCM2411 -10 -6 AERFCM2421 -10 -8 AERFCM2413 -12 -6 AERFCM2414 -12 -8 AERFCM2422 -12 -10
A
A
B
Part No.
“A” Dash Size
“B” Tube Size
“C” Counterbore Size
AERFCM2871 AERFCM2872 AERFCM2873 AERFCM2874 AERFCM2875 AERFCM2876 AERFCM2877 AERFCM2878 AERFCM2879
-4 -6 -6 -8 -10 -10 -12 -12 -16
1/4" 3/8" 1/2" 1/2" 5/8" 3/4" 3/4" 1" 1"
.16 .16 .16 .16 .16 .25 .25 .25 .25
2010
033-048OW10.indd 41
41
11/10/09 8:59:30 AM
AN Flare To Pipe Adapters Aluminum Part No.
Steel Part No.
“A” Dash Size
Aluminum or Steel Male Connector AERFCM2000 AERFCM2511 -3 AERFCM2001 AERFCM2512 -4 AERFCM2002 AERFCM2515 -4 – AERFCM2519 -4 – AERFCM2524 -4 AERFCM2003 AERFCM2514 -6 AERFCM2004 AERFCM2517 -6 AERFCM2005 AERFCM2521 -6 AERFCM2013 AERFCM2525 -6 – AERFCM2529 -6 AERFCM2006 AERFCM2518 -8 AERFCM2007 AERFCM2522 -8 AERFCM2008 AERFCM2526 -8 – AERFCM2530 -8 AERFCM2185 AERFCM2523 -10 AERFCM2009 AERFCM2527 -10 – AERFCM2531 -10 AERFCM2010 AERFCM2528 -12 AERFCM2011 AERFCM2532 -12 AERFCM2014 AERFCM2534 -12 AERFCM2015 AERFCM2533 -16 AERFCM2012 AERFCM2535 -16 – AERFCM2540 -16 – AERFCM2541 -20 Aluminum or Steel 45˚ Male Elbow AERFCM2020 AERFCM2581 -3 AERFCM2021 AERFCM2582 -4 – AERFCM2584 -4 AERFCM2022 AERFCM2586 -6 – AERFCM2589 -6 – AERFCM2592 -6 – AERFCM2587 -8 AERFCM2023 AERFCM2590 -8 – AERFCM2593 -8 – AERFCM2591 -10 AERFCM2024 AERFCM2594 -10 – AERFCM2597 -10 – AERFCM2595 -12 AERFCM2025 AERFCM2598 -12 – AERFCM2599 -16 AERFCM2026 – -16 Aluminum or Steel 90˚ Male Elbow AERFCM2030 AERFCM2610 -3 AERFCM2031 AERFCM2611 -4 AERFCM2032 AERFCM2614 -4 – AERFCM2618 -4 – AERFCM2624 -4 AERFCM2033 AERFCM2613 -6 AERFCM2034 AERFCM2616 -6 AERFCM2035 AERFCM2620 -6 – AERFCM2625 -6 AERFCM2036 AERFCM2617 -8 AERFCM2037 AERFCM2621 -8 AERFCM2038 AERFCM2626 -8 – AERFCM2629 -8 AERFCM2016 AERFCM2622 -10 AERFCM2039 AERFCM2627 -10 – AERFCM2630 -10 – AERFCM2623 -12 AERFCM2017 AERFCM2628 -12 AERFCM2040 AERFCM2631 -12 AERFCM2018 – -16 AERFCM2041 AERFCM2634 -16
B
“B” Pipe Size
1/8" 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 3/4" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" 1" 3/4" 1" 1-1/4" 1-1/4"
A
Aluminum or Steel Male Run Tee Aluminum Part No.
Steel Part No.
“A” Dash Size
“B” Pipe Size
“C” Dash Size
AERFCM2714 AERFCM2124 – AERFCM2125 – AERFCM2126 – – –
AERFCM2700 AERFCM2701 AERFCM2703 AERFCM2704 AERFCM2705 AERFCM2706 AERFCM2707 AERFCM2708 AERFCM2710
-3 -4 -4 -6 -6 -8 -8 -10 -12
1/8" 1/8" 1/4" 1/4" 3/8" 3/8" 1/2" 1/2" 3/4"
-3 -4 -4 -6 -6 -8 -8 -10 -12
B
A
C
B
Aluminum Male Branch Tee Part No.
“A” Dash Size
“B” Dash Size
“C” Pipe Size
AERFCM2187 AERFCM2121 AERFCM2122 AERFCM2123
-3 -4 -6 -8
-3 -4 -6 -8
1/8" 1/8" 1/4" 3/8"
C
A
Steel Female Pipe To Male AN
1/8" 1/8" 1/4" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" 3/4" 1"
A
1/8" 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 3/4" 1"
A
B
Part No.
“A” Dash Size
“B” Pipe Size
AERFCM2719 AERFCM2720 AERFCM2721 AERFCM2723 AERFCM2725 AERFCM2727 AERFCM2726 AERFCM2728 AERFCM2730 AERFCM2731 AERFCM2734 AERFCM2732
-3 -3 -4 -4 -6 -6 -8 -8 -8 -10 -10 -12
1/8" 1/4" 1/8" 1/4" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2" 3/4" 1/2"
B
A
B
Steel Female Pipe Flare Tee Part No.
“A” Dash Size
“B” Dash Size
“C” Pipe Size
AERFCM2881 AERFCM2882 AERFCM2883 AERFCM2884 AERFCM2885
-3 -4 -4 -6 -8
-3 -4 -4 -6 -8
1/8" 1/8" 1/4" 1/4" 3/8" B
Steel Female Pipe Flare Tee B
C
A
Part No.
“A” Dash Size
“B” Pipe Size
“C” Dash Size
AERFCM2817 AERFCM2818
-3 -4
1/8" 1/8"
-3 -4
A C B
AERFCM2821 (Female)
Steel Bulkhead Connectors Part No.
“A” Dash Size
“B” Pipe Size
AERFCM2821 (Female) AERFCM2831 (Male)
-4 -4
1/8" 1/4"
A
B
AERFCM2831 (Male) A
42
2010
033-048OW10.indd 42
11/10/09 8:59:39 AM
B
Pipe Adapters “A” Pipe Size
Part No.
AQP Power Steering Hose AQP Power Steering Hose is for high pressure power steering, hydraulic, air, fuel and oil applications. Offered in blue or black, abrasion-resistant fabric cover surrounds a patented AQP synthetic rubber tube. For use with standard reusable fittings. Sold in pre-cut lengths of 3, 6, 10, 15 and 20 feet.
“B” Pipe Size
Aluminum Pipe Coupling AERFCM2129 1/8" 1/8" AERFCM2130 1/4" 1/4" AERFCM2131 3/8" 3/8" Aluminum Female To Male Pipe 90˚ Elbow AERFCM2147 1/8" 1/8" AERFCM2148 1/4" 1/4" AERFCM2149 3/8" 3/8" Aluminum Pipe Bushing AERFCM2136 1/4" 1/8" AERFCM2137 3/8" 1/4" AERFCM2138 3/8" 1/8" AERFCM2139 1/2" 3/8" AERFCM2140 1/2" 1/4" AERFCM2141 1/2" 1/8" AERFCM2142 3/4" 1/2" AERFCM2143 3/4" 3/8" AERFCM2144 3/4" 1/4" AERFCM2145 1" 3/4" AERFCM2146 1" 1/2"
A
Hose Dash Size
A
1/8" 1/4" 3/8"
15'
20'
Fittings For Power Steering Hose Straight SAE 37° (JIC/AN) Swivel Part No.
Hose and Fitting Dash Size
AERFBM1302 ........... -06 AERFBM1305 ........... -08 AERFBM1307 ........... -10 A
45° SAE 37° (JIC/AN) Swivel
“A” “B” “C” Pipe Size Pipe Size Pipe Size
1/8" 1/4" 3/8"
10'
B
Aluminum Female Pipe Tee AERFCM2150 AERFCM2151 AERFCM2152
6'
B
B
Part No.
3'
Blue Hose -06 – AERFCG0606 AERFCG0610 AERFCG0615 AERFCG0620 -10 – AERFCG1006 AERFCG1010 – – Black Hose -06 AER1503-6-3 AER1503-6-6 AER1503-6-10 AER1503-6-15 AER1503-6-20
Part No.
Hose and Fitting Dash Size
AERFBM1386 ........... -06 AERFBM1384 ........... -08 AERFBM1338 ........... -10 90° SAE 37° (JIC/AN) Swivel
1/8" 1/4" 3/8"
C
A
Part No.
Hose and Fitting Dash Size
AERFBM1389 ........... -06 AERFBM1387 ........... -08 AERFBM1374 ........... -10
B
45° Elbow SAE Male Inverted Flare
Aluminum Male Pipe Nipple Part No.
“A” Pipe Size
“B” Pipe Size
AERFCM2132 AERFCM2133 AERFCM2134 AERFCM2135
1/8" 1/4" 3/8" 1/2"
1/8" 1/4" 3/8" 1/2"
Part No.
Hose and Fitting Dash Size
AERFBM1382 ........... -06 90° Elbow SAE Male Inverted Flare Part No. A
Aluminum Allen Head Pipe Plug
Hose and Fitting Dash Size
AERFBM1392 ........... -06
Aluminum In-Line AN Pressure Gauge Adapters
Part No.
“A” Pipe Size
No. Per Pkg.
Part No.
“A” Dash Size
“B” Dash Size
“C” Pipe Size
AERFCM3684 AERFCM3685 AERFCM3686 AERFCM3687 AERFCM3749 AERFCM3750
1/16" 1/8" 1/4" 3/8" 1/2" 3/4"
2 2 2 2 1 1
AERFCM2183 AERFCM2184
-6 -8
-6 -8
1/8" 1/8"
TECH TIP Actual Thread Sizes Pipe Thread
A
B C
Aluminum In-Line AN-To-Pipe Pressure Gauge Adapters Part No.
“A” Dash Size
“B” Pipe Size
“C” Pipe Size
AERFCM2276 AERFCM2277 AERFCM2278 AERFCM2279
-6 -6 -8 -8
1/4" 3/8" 1/4" 3/8"
1/8" 1/8" 1/8" 1/8"
Aluminum 90° AN-To-AN Pressure Gauge Adapters Part No.
“A” Dash Size
“B” Dash Size
“C” Pipe Size
AERFCM2272 AERFCM2273 AERFCM2274
-6 -8 -10
-6 -8 -10
1/8" 1/8" 1/8"
2010
033-048OW10.indd 43
A
A
B C
A C
B
43
11/10/09 8:59:48 AM
TFE Racing Hose Brake Lines
Quick Disconnect Brake And Clutch Coupling
Aeroquip TFE Racing Hose for hydraulic brake applications has a bright stainless steel wire braid cover that resists abrasion and corrosion and an extruded Teflon inner liner that’s compatible with all brake fluids. Teflon hose is recommended for use only on off-highway brake systems. Temperature range of -100°F to +450°F.
Allows rapid connection/ disconnection of brake and clutch lines without fluid loss, air inclusion or the need to bleed the line. Coupling also includes a safety clip on lanyard to prevent accidental disconnection. Available with -3 or -4AN, S.A.E. 37° (JIC/AN) threads. Male half includes jam nut for bulkhead mounting. Temperature range -40°F to +250°F.
Size
I.D.
-3 -4
O.D.
3 Ft. Length
6 Ft. Length
10 Ft. Length
AERFCC0303 AERFCC0403
AERFCC0306 AERFCC0406
AERFCC0310 AERFCC0410
O.D.
15 Ft. Length
20 Ft. Length
.13" .25" .19" .30"
AERFCC0315 AERFCC0415
AERFCC0320 AERFCC0420
.13" .25" .19" .30"
Size
I.D.
-3 -4
AERFBM1073 AERFBM1074
Hose And Fitting Dash Size
Straight Steel SAE 37˚ (JIC/AN) Swivel AERFCM1100 ........... -3 AERFCM1101 ........... -4 Steel 45˚ Tube Elbow 37˚ AERFCM1110 (JIC/AN) AERFCM1110 ........... -3 AERFCM1111 ........... -4 Steel 90˚ Tube Elbow 37˚ (JIC/AN) AERFCM1120 ........... -3 AERFCM1121 ........... -4 Straight Stainless Steel Crimp 37˚ AERFCM1130 (JIC/AN) AERFCM1130 ........... -3 AERFCM1102 ........... -4 45˚ Stainless Steel Forged Elbow SAE 37˚ (JIC/AN) Swivel AERFCM1140 AERFCM1140 ........... -3 AERFCM1146 ........... -4 90˚ Stainless Steel Forged Elbow SAE 37˚ (JIC/AN) Swivel AERFCM1150 ........... -3 AERFCM1150 AERFCM1151 ........... -4
-3 -4
Air Incl. C.C. Max
Fluid Loss C.C. Max
Length (In.) Connected
.02 .02
.10 .10
4.10" 4.25"
3000 3000
AERFCM1100
Coupling assembly quickly and effectively drains cooling systems. Internal components are corrosion resistant stainless steel and Viton seals prevent the possibility of leakage. Features 1/2" NPT threads on each end. Ideally installed on lower radiator outlet or in-line on lower hose. Requires purchase of one male and one female coupling. Part No.
Steel Male Pipe With Brass Nipple Part No.
Hose And Fitting Dash Size
Pipe Thread Size
AERFCM3088 AERFCM3089
-4 -4
1/8" 1/4"
Replacement Sleeve For TFE Fittings Brass Part No.
Stainless Part No.
Hose And Fitting Dash Size
AERFCM3720 AERFCM3721
AERFCM3821 AERFCM3822
-3 -4
AERFBM1153 AERFBM3113
Description
AERFBM1153 ....Male Aluminum Quick Disconnect Coupling AERFBM3113 ....Female Steel Quick Disconnect Coupling, 1.6 oz. AERFBM3114 ....Female Aluminum Quick Disconnect Coupling, 3.97 oz.
Aluminum Tank Welding Bungs Part No.
“A” Dash Size
“B” Dim.
“C” Dim.
AERFCM2403 AERFCM2404 AERFCM2405 AERFCM2406 AERFCM2407
-06 -08 -10 -12 -16
1.56" 1.75" 1.87" 2.00" 2.25"
.59" .68" .75" .90" .93"
AERFCM1120
C
A
B
Note: Use O-ring for sealing. Accepts male AN flare with hex or boss O-ring plug.
O-Rings Nitrile* Part No.
44
Hose Fitting Max. Oper. Dash Size Pressure (PSI)
Quick Disconnect Radiator/Cooling Refill Coupling
Brake Fittings Part No.
Steel Part No.
EPR** Part No.
Dash Size
“A”
“B”
AERFCM3473 AERFCM3463 -4 .351" .072" AERFCM3474 AERFCM3464 -6 .468" .078" AERFCM3475 AERFCM3465 -8 .644" .087" B AERFCM3476 AERFCM3466 -10 .755" .097" AERFCM3477 AERFCM3467 -12 .924" .116" AERFCM3497 AERFCM3468 -16 1.171" .116" *Nitrile O-rings are for use with gasoline (ten per package) **EPR O-rings are for use with alcohol (five per package)
A
Aluminum Dust Plugs And Caps Keeps dirt and contamination out of oil, fuel and cooling systems when not in use. Dash Size
NPT
Plug Part No.
Cap Part No.
No. Per Pkg.
-04 -06 -08 -10 -12 -16
7/16"-20 9/16"-18 3/4"-16 7/8"-14 1-1/16"-12 1-5/16"-12
AERFBM3655 AERFBM3656 AERFBM3657 AERFBM3658 AERFBM3659 AERFBM3660
AERFBM3648 AERFBM3649 AERFBM3650 AERFBM3651 AERFBM3652 AERFBM3653
20 20 20 12 10 10
2010
033-048OW10.indd 44
11/10/09 9:00:09 AM
Tube Bender AERFT1619
Portable Crimp Machine AERET1000-013
Heavy duty 180° tube bender can bend aluminum, copper, brass, stainless steel and other types of tubing. Ergonomically molded cushion grips provide a comfortable feel. Triple ratchet model has the ability to bend 3/16", 1/4", 5/16" and 3/8" O.D. tubing.
An effective, economical hose crimping machine which may be powered by air or hydraulics. Designed for AQP Racing and StartLite hoses with straight thru 120° swivel fittings and AQP Teflon Racing Hoses with -3, -4 and -6 straight fittings. Includes collet and spacer ring tooling package.
TFE Racing Hose Brake Line Assemblies NEW! Ready to install, pre-assembled and tested brake line assemblies are manufactured using premium stainless steel TFE teflon hose complete with choice of straight or 90° fitting configurations. Assemblies feature a 3,000 PSI maximum operating pressure. Non-D.O.T. brake lines are intended for off-road use only. Size
-3 -3 -4 -4
Description
10" Length Part No.
12" Length Part No.
15" Length Part No.
Straight/ AERFBPA0030-10 AERFBPA0030-12 AERFBPA0030-15 Straight Assembly Straight/ – – AERFBPA0039-15 90° Assembly Straight/ AERFBPA0040-10 AERFBPA0040-12 AERFBPA0040-15 Straight Assembly Straight/ – – AERFBPA0049-15 90° Assembly
18" Length Part No.
21" Length Part No.
24" Length Part No.
30" Length Part No.
36" Length Part No.
AERFBPA0030-18 AERFBPA0030-21 AERFBPA0030-24 AERFBPA0030-30 AERFBPA0030-36
42" Length Part No.
–
AERFBPA0039-18 AERFBPA0039-21 AERFBPA0039-24 AERFBPA0039-30 AERFBPA0039-36 AERFBPA0039-42 AERFBPA0040-18 AERFBPA0040-21 AERFBPA0040-24 AERFBPA0040-30 AERFBPA0040-36 AERFBPA0040-42 AERFBPA0049-18 AERFBPA0049-21 AERFBPA0049-24 AERFBPA0049-30 AERFBPA0049-36 AERFBPA0049-42
Universal Bypass Regulator AFS13301
Fuel Pressure Gauges
May be used with carbureted or EFI fuel systems. Fuel pressure is adjustable from 3-20 PSI with standard spring (installed) or 20-60 PSI with included high pressure spring. Compatible with pumps up to 250 GPH.
Compact, easily read gauges are 1-1/2" diameter with stainless steel cases.
Pro Series Inline Filters
Tapered Flare Fittings
Nickel-silver finished filters are 7" long x 2-1/2" diameter with -12AN ports. Choose 10-micron fabric or 100-micron stainless elements. 10-micron filter installs on pressure/outlet side of pump. 100-micron unit is used on inlet side of pump.
High flow, aluminum fittings include O-ring bosses for a smooth transition from the radius to the 37° flare. Black anodized fittings are ideal for use with fuel pumps or regulators. Sold individually.
Part No.
Description
AFS15632..........Fuel Pressure Gauge, 0-15 PSI AFS15633..........Fuel Pressure Gauge, 0-100 PSI
Part No.
Description
Designed for use on the pressure/outlet side of SS fuel pump (AFS11203), red anodized filter is 3-1/2" long x 1-1/2" diameter with 3/8" NPT ports and a 40-micron (medium) fabric element.
AFS15605..........-8AN O-Ring Boss To -6AN Male Flare Adapter AFS15606..........-6AN O-Ring Boss To -6AN Male Flare Adapter AFS15607..........-8AN O-Ring Boss To -8AN Male Flare Adapter AFS15608..........-10AN O-Ring Boss To -10AN Male Flare Adapter AFS15609..........-10AN O-Ring Boss To -6AN Male Flare Reducer AFS15610..........-10AN O-Ring Boss To -8AN Male Flare Reducer AFS15612..........-12AN O-Ring Boss To -12AN Male Flare Adapter AFS15613..........-12AN O-Ring Boss To -10AN Male Flare Reducer AFS15617..........-10AN O-Ring Boss Port Plug AFS15618..........-8AN O-Ring Boss Slim Line Port Plug AFS15620..........“Y”-Block, One -10AN O-Ring Boss To Two -8AN O-Ring Boss Ports AFS15626..........-6AN Port Plug
Inline Filter AFS12304
One-Way Check Valves
Part No.
AFS12302 AFS12310
Description
Element
Pro Series Filter 100-Micron Stainless (Coarse) Pro Series Filter 10-Micron Fabric (Fine)
Replacement Element
AFS12602 AFS12610
SS Series Inline Filter AFS12303
Red anodized inline filter is 5" long x 2" diameter and installs on the inlet side of the fuel pump. Filter has -10AN ports and includes a 100-micron (coarse) stainless element. Replacement element is AFS12604.
Designed for inline installation. Part No.
Description
AFS15106..........-6AN Check Valve AFS15107..........-10AN Check Valve
2010
033-048OW10.indd 45
45
11/10/09 9:00:19 AM
R-Series Aluminum Body Shock Absorbers
S-Series Steel Body Shock Absorbers
Twin tube, fixed valve shocks are dyno tested, rebuildable and revalvable.
Sealed twin tube shocks combine performance and value. Available with replaceable or fixed bearings.
Part No.
Stroke Valving
Compressed Extended Length Length
A. Aluminum Smooth Body/Smooth Rod End AFC1171-9S 7" 1/9 13.00" 20.00" AFC1171-14T 7" 1/14 13.00" 20.00" AFC1175-3S 7" 5/3 13.00" 20.00" AFC1179-1S 7" 9/1 13.00" 20.00" AFC1195S 9" 5 15.00" 24.00" B. Aluminum Threaded Body AFC1373T 7" 3 13.00" 20.00" AFC1373-5T 7" 3/5 13.00" 20.00" AFC1373-7T 7" 3/7 13.00" 20.00" AFC1374T 7" 4 13.00" 20.00" AFC1374-6T 7" 4/6 13.00" 20.00" AFC1375T 7" 5 13.00" 20.00" AFC1375-3T 7" 5/3 13.00" 20.00" AFC1375-6T 7" 5/6 13.00" 20.00" AFC1375-7T 7" 5/7 13.00" 20.00" AFC1376T 7" 6 13.00" 20.00" AFC1376-2T 7" 6/2 13.00" 20.00" AFC1376-4T 7" 6/4 13.00" 20.00" AFC1393T 9" 3 15.00" 24.00" AFC1393-5T 9" 3/5 15.00" 24.00" AFC1394T 9" 4 15.00" 24.00" AFC1394-6T 9" 4/6 15.00" 24.00" AFC1395T 9" 5 15.00" 24.00" AFC1395-3T 9" 5/3 15.00" 24.00" AFC1395-6T 9" 5/6 15.00" 24.00" AFC1396T 9" 6 15.00" 24.00" AFC1399-3T 9" 9/3 15.00" 24.00" C. Aluminum Small/Smooth Body AFC1664S 6" 4 11.75" 17.75" AFC1665S 6" 5 11.75" 17.75" AFC1674S 7" 4 12.75" 19.75" AFC1675S 7" 5 12.75' 19.75" AFC1675-3S 7" 5/3 12.75" 19.75" AFC1676-2S 7" 6/2 12.75" 19.75" AFC1676-3S 7" 6/3 12.75" 19.75" AFC1684S 8" 4 13.75" 21.75" AFC1684-7S 8" 4/7 13.75" 21.75" AFC1694-7S 9" 4/7 14.75" 22.75" AFC1695S 9" 5 14.75" 22.75"
Part No.
A
B
C
Stroke
Valving
D. Steel Body AFC1075 7" 5 AFC1075-3 7" 5/3 AFC1076 7" 6 AFC1076-4 7" 6/4 AFC1079-1 7" Damper AFC1093 9" 3 AFC1094 9" 4 AFC1095 9" 5 E. Fixed Bearing Steel Body AFC1273FB 7" 3 AFC1274FB 7" 4 AFC1275FB 7" 5 AFC1275-3FB 7" 5/3 AFC1276FB 7" 6 AFC1276-2FB 7" 6/2 AFC1276-4FB 7" 6/4 AFC1277FB 7" 7 AFC1277-2FB 7" 7/2 AFC1279-1FB 7" Damper AFC1293FB 9" 3 AFC1293-5FB 9" 3/5 AFC1294FB 9" 4 AFC1295FB 9" 5 AFC1296FB 9" 6 F. Small Steel Body AFC1551 5" 1 AFC1554 5" 4 AFC1563 6" 3 AFC1564 6" 4 AFC1573 7" 3 AFC1573-5 7" 3/5 AFC1574 7" 4 AFC1575 7" 5 AFC1575-3 7" 5/3 AFC1576 7" 6
Compressed Length
Extended Length
12.75" 12.75" 12.75" 12.75" 12.75" 14.75" 14.75" 14.75"
19.50" 19.50" 19.50" 19.50" 19.50" 23.50" 23.50" 23.50"
12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 12-3/8" 14-3/8" 14-3/8" 14-3/8" 14-3/8" 14-3/8"
19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 19-1/4" 23-1/4" 23-1/4" 23-1/4" 23-1/4" 23-1/4"
10.70" 10.70" 11.50" 11.50" 12.70" 12.70" 12.70" 12.70" 12.70" 12.70"
17.70" 17.70" 17.50" 17.50" 19.70" 19.70" 19.70" 19.70" 19.70" 19.70"
D
E
F
Part No. Key For Shock Absorbers
AFC1277-2FB Rebound Series Stroke Compression
Shock Absorber Rod Ends and Extensions Part No.
Description
AFC1004 .................. 11, 13 R-Series Rod End, Standard Length, Coil-Over Style AFC20176 ................ 13 T-Series Rod End, Standard AFC20176-1 ............. 13 T-Series Rod End, 1" Longer Standard AFC20180 ................ 11, 13 R-Series 1" Shaft Extension, 9/16" AFC20180-1 ............. 11, 13 R-Series 2" Shaft Extension, 9/16"
Shock Bumpers with Cone AFC20174 NEW! Convoluted bumper with an aluminum cone prevents bottoming out. Part No.
Description
AFC20173 .........Cone For Rubber Shock Bumper AFC20174-1 ......Blue, Standard AFC20174-1 AFC20174-2 ......Red, Soft AFC20174-3 ......White, Medium AFC20174-4 ......Black, Hard
Standard Tire Pressure Gauges AFCO standard tire pressure gauges, with 2-1/2" gauge faces, use only the highest quality components and include protective boots and 14" air hoses with swivel chucks and air bleeds. Part No.
Description
AFC85315R .... 0-15 PSI AFC85330R .... 0-30 PSI
46
Part No.
Coil-Over Hardware Part No.
Description
1.875" OD Kit AFC20125SB ............ 1.875" Kit For Steel Small Body Shocks (5" Sleeve) AFC20124 ................ 13 Series Shocks AFC20123 ................ 16 Series Shocks, Kit AFC20125SB ............ 15 Series Shocks, 5" Sleeve AFC20125SB-7 ......... 15 Series Shocks, 7" Sleeve
Spanner Wrench AFC20110 NEW! Relax the spring pressure and use the wrench to adjust coil-over nuts.
Aluminum Radiator Repair Kit AFC80161 NEW! Solder kit may be used to repair aluminum radiators.
Description
AFC85360R ......0-60 PSI
2010
033-048OW10.indd 46
11/10/09 9:00:42 AM
NEW VENDOR NEW VENDOR Xtreme Piston Ring Compressors
Sprint Fuel Cells
Tapered ring compressors ease piston installation and eliminate ring breakage. Compressors are machined from 6061-T6 aluminum, heat treated, hard anodized and available in a variety of bore sizes. Part No.
Bore Dia.
ACXAC-RC3875 ....... 3.875" ACXAC-RC3905 ....... 3.905" ACXAC-RC4000 ....... 4.000" ACXAC-RC4020 ........ 4.020" ACXAC-RC4030 ........ 4.030" ACXAC-RC4040 ........ 4.040" ACXAC-RC4060 ........ 4.060"
Part No.
Bore Dia.
ACXAC-RC4090 ........ 4.090" ACXAC-RC4125 ........ 4.125" ACXAC-RC4145 ........ 4.145" ACXAC-RC4155 ........ 4.155" ACXAC-RC4165 ........ 4.165"
ATLSC428
Flexible 28 gallon alcohol bladders are the lightest available ATLSC428-FS and have a super tough, molded, seamless outer tank. Cells include 4" x 6" aluminum fill plate, -6AN vent check valve, -6AN return, internal pick-up hose and -12AN front outlet. Both have easy access front cover panel, 2" aluminum flush cap, are resistant to Methanol and Ethanol and include Velcro mounts for surge tank. Available in two configurations: a direct replacement for Fuel Safe’s SB228, or as a Kinser-Designed cell. Both include four molded-in mounting inserts. Part No.
Description
ATLSC428 ................ Kinser-Designed Sprint Cell, 11lbs. Lighter Than Competition ATLSC428-FS ........... Direct Fuel Safe (SB228) Replacement
Xtreme Assembly Oil ACXAC-9900 Engineered to lubricate cylinders, pistons and piston rings during the engine assembly process. Xtreme assembly oil prevents piston scuffing and promotes piston ring seating during the critical break-in period. Sold in a 16 oz. bottle.
Dipstick ATLTF207 Dipstick, 16" long, may be cut to desired length.
NEW VENDOR
AcuAngle Level ARGRP302
Rod Ends Alinabal offers three rod ends: The PRO-Line Series, economical, steel performance rod ends with carbon fiber-reinforced races and maintenance-free, self-lubrication, ideal for suspension and other components; PRO-Line Aluminum rod ends with hard chrome plated steel balls, carbon fiber reinforced races and self-lubrication are 41% lighter and 18% stronger than steel; premium, RM Series chrome moly, three-piece steel rod ends that can handle increased static loads. Description
LH Part No.
RH Part No.
Pro-Line Steel Series Rod Ends 1/2" x 5/8" ALI30004731 ALI30004723 Aluminum PRO-Line Series Rod Ends 1/2" x 1/2" ALI30005064 ALI30005063 1/2" x 5/8" ALI30005108 ALI30005107 RM Series Chrome Moly Steel Rod Ends 1/2" x 5/8" – ALI30158150
The AcuAngle can find and set any angle, and is particularly helpful when building roll cages or checking driveshaft angles. Pocket sized angle level has an oil bezel type gauge with magnetic base. Dimensions: 3-3/4" x 3-1/8" x 1/2". Accurate to 0.1° and includes 6" scale.
Sport Jack ARGRP475 The Sport Jack incorporates a Pace power unit with steel lift beam and unique monocoque chassis. Conforms to Pace quality standards. Weighs 39 lbs. Lifting Specs: • 3-1/8" flat height • 18" maximum lift • 1-3/4" lift per stroke Dirt Wing Kit ARGRP653 (Sold Separately)
Digital Tire Gauge ARGRP108 Spark Plugs Autolite Spark Plugs use a copper center electrode sheathed in nickel chromium alloy to provide superior heat dissipation. A multi-rib insulator reduces the chances of “flash-over”, and a longer insulator, pioneered by Autolite, resists carbon fouling, allowing combustion deposits to burn away. We carry a complete selection of plugs for virtually any application. Sold individually, please call for more details.
Large gauge has digital readout that displays a 3-100 PSI range in 0.5 lb. increments. Flexible hose has a swivel air chuck and bleeder valve for easy pressure settings and adjustments. Accurate to ±1 PSI.
High Flow Air Regulator ARGRP100 High flow regulator with diaphragm flows 183 CFM at 250 PSI. Pressure drop at 200 PSI is only 10 lbs. Ports are 3/8" NPT.
For More Info, See Spark Plug Cross Reference Chart On Page 229
2010
033-048OW10.indd 47
47
11/10/09 9:00:59 AM
Aurora Bearing Company manufactures two- and three-piece spherical rod ends. Both use a solid, one-piece race. The two-piece version consists of a body and precision ground, oil impregnated, sintered steel ball which allows the rod end body to carry a greater static load. The three-piece rod end consists of a body, ball and race and features a fully swaged bearing for maximum spherical conformity between the ball and race.
Rod End Specifications Description
Body
Race
CM, CB, CW and CG Series, 2 Pc. General Purpose-Economy VCM, VCB, VCW and VCG Series, 2 Pc. General Purpose-Economy*
Carbon steel, protective coated for corrosion resistance Carbon steel, protective coated for corrosion resistance, PTFE lined. Carbon steel, protective coated for corMM, MB, MW and MG Series, 3 Pc. rosion resistance, No. 16 series standard General Purpose-Precision body is 4130 steel, non heat treated AM, AB, AW And AG Series, 3 Pc. 4130 steel alloy, heat treated and High Strength Alloy-Precision protective coated for corrosion resistance XM and XB Series, 3 Pc. Carbon steel, protective coated Extra Strength-Heavy Duty Shank for corrosion resistance. XAM and XAB Series, 3 Pc. Steel alloy heat treated and protective High Strength Alloy-Heavy Duty Shank coated for corrosion resistance. ALM and ALM Series Aluminum 7075-T651, hard anodized High Strength Aluminum *Popular use as tie rod ends
Ball
Sintered steel, heat treated, oil impregnated Sintered steel, heat treated, oil impregnated
– – Carbon steel, protective coated for corrosion resistance
Alloy steel, heat treated and hard chrome plated
Steel alloy heat treated and coated for corrosion resistance Steel alloy heat treated and coated for corrosion resistance Steel alloy heat treated and coated for corrosion resistance. Carbon steel, protective coated for corrosion resistance
Alloy steel, heat treated and hard chrome plated Alloy steel, heat treated and hard chrome plated Alloy steel, heat treated and hard chrome plated Alloy steel, heat treated, hard chrome plated
Rod End Part Numbers Thread Size
Hole Size
CM, CB, CW, CG
Jam Nuts VCM, VCB, VCW, VCG
MM, MB, MW, MG
AM, AB AW, AG
XM, XB
XAM, XAB
ALB, ALM
Male 10-32 RH Male 3/16" AURCM-3 – AURMM-3 – – – – 10-32 LH Male 3/16" AURCB-3 – AURMB-3 – – – – 1/4" RH Male 1/4" AURCM-4 – AURMM-4 AURAM-4 – – – 1/4" LH Male 1/4" AURCB-4 – AURMB-4 AURAB-4 – – – 5/16" RH Male 5/16" AURCM-5 AURVCM-5 AURMM-5 AURAM-5 – – – 5/16" LH Male 5/16" AURCB-5 AURVCB-5 AURMB-5 AURAB-5 – – – 3/8" RH Male 3/8" AURCM-6 AURVCM-6 AURMM-6Y AURAM-6 – – – 3/8" LH Male 3/8" AURCB-6 AURVCB-6 AURMB-6Y AURAB-6 – – – 7/16" RH Male 7/16" AURCM-7 – AURMM-7Y AURAM-7 – – – 7/16" LH Male 7/16" AURCB-7 – AURMB-7Y AURAB-7 – – – 1/2" RH Male 1/2" AURCM-8 AURVCM-8 AURMM-8Y AURAM-8* – – – 1/2" LH Male 1/2" AURCB-8 AURVCB-8 AURMB-8Y AURAB-8* – – – – – AURALM-10 5/8" RH Male 5/8" AURCM-10 AURVCM-10 AURMM-10Y AURAM-10* 5/8" RH Male 1/2" – – – – AURXM-8 AURXAM-8 – 5/8" LH Male 5/8" AURCB-10 AURVCB-10 AURMB-10Y AURAB-10* – – AURALB-10 5/8" LH Male 1/2" – – – – AURXB-8 AURXAB-8 – Female 10-32 RH Female 3/16" AURCW-3 – – – – – – 1/4" RH Female 1/4" AURCW-4 – – – – – – 1/4" LH Female 1/4" AURCG-4 – – – – – 5/16" RH Female 5/16" AURCW-5 AURVCW-5 AURMW-5 AURAW-5 – – – 5/16" LH Female 5/16" – AURVCG-5 – – – – – 3/8" RH Female 3/8" AURCW-6 AURVCW-6 – AURAW-6 – – – 3/8" LH Female 3/8" AURCG-6 – – – – – – 7/16" RH Female 7/16" AURCW-7 AURVCW-7 AURMW-7 AURAW-7 – – – 7/16" LH Female 7/16" – – – – – – – 1/2 RH Female 1/2" AURCW-8 AURVCW-8 AURMW-8 AURAW-8 – – – 1/2" LH Female 1/2" AURCG-8 AURVCG-8 – – – – – * Signifies rod ends that are also available with PTFE (Teflon) liner by adding “T” to the end of the part number.
Commercial Economy Series Rod Ends Economical rod ends with low carbon steel bodies are protective coated for corrosion resistance. Steel ball is heat-treated and oil-impregnated. Part No.
Thread Size
Hole Size
AURCEM-8 AURCEB-8 AURCEM-10 AURCEB-10
1/2" RH Male 1/2" LH Male 5/8" RH Male 5/8" LH Male
1/2" 1/2" 5/8" 5/8"
48
Size
Steel Part No.
Aluminum Part No.
1/4" RH 1/4" LH 5/16" RH 5/16" LH 3/8" RH 3/8" LH 7/16" RH 7/16" LH 1/2" RH 1/2" LH 5/8" RH 5/8" LH
ALL18250 ALL18251 ALL18252 ALL18253 ALL18254 ALL18255 ALL18256 ALL18257 ALL18258 ALL18259 ALL18260 ALL18261
– – – – – – – – ALL18278 ALL18279 ALL18280 ALL18281
Jam Nut Assortment
ALL18290 ALL18291
35 Asst. RH Jam Nuts 35 Asst. LH Jam Nuts
Mono Ball Bearings Race is carbon steel with protective coating. Ball is hardened steel, heat treated and hard chrome plated. Part No.
I.D.
O.D.
AURCOM-10 AURCOM-12
.625" .750"
1.1875" 1.4375"
Rod Ends With Studs NEW! Perfect for throttle linkage and other applications. Size
1/4" RH 5/16" RH 3/8" RH 1/4" LH 5/16" LH 3/8" LH
Male
Female
AURCM-4S AURCW-4S AURCM-5S AURCW-5S AURCM-6S AURCW-6S AURCB-4S AURCG-4S AURCB-5S AURCG-5S AURCB-6S AURCG-6S
2010
033-048OW10.indd 48
11/10/09 9:01:17 AM
2-1/16" Dia. Gauges Sport-Comp
Carbon Fiber 2-1/16" diameter gauges have real carbon fiber dials and silver bezels and pointers. Installation hardware and 12 volt lighting included.
Sport-Comp styling is now available in the popular 2-1/16" size. Featuring the same easy-toread black dial face and bright red pointer as the 2-5/8" versions, the 2-1/16" Sport-Comp can be easily read at a quick glance. Installation hardware and 12 volt lighting included.
Ultra-Lite II Easy-to-read gauges feature intense, “through the dial” LED lighting and a red, LED lit pointer. Unique, reverse lighting effect displays a silver dial with black increments during daylight, while a dark dial and illuminated increments are visible at night. Installation hardware and 12 volt lighting included.
Sport-Comp II Gauges feature the look of the traditional SportComp line with modern, “through the dial” LED dial and pointer. Sport-Comp II gauges have a black dial face with white increments, which become illuminated for easier reading at night. Installation hardware and 12 volt lighting included.
Phantom Compact, easy to mount 2-1/16" Phantom gauges have bright white dial faces, black bezels and bright red pointers for easy reading. Installation hardware and 12 volt lighting included.
Ultra-Lite Auto Meter combined their Ultra-Lite gauges with the popular 2-1/16" size to create the 2-1/16" Ultra-Lite line. The gauges feature satin aluminum dial faces with bright red pointers for excellent visibility. Installation hardware and 12 volt lighting included.
Phantom II Bright, white dial faces which change to black at night and red pointers are illuminated by LED's for unmatched visibility. Installation hardware and 12 volt lighting included.
Description
Sport-Comp
Sport-Comp II
Ultra-Lite
Carbon Fiber
Ultra-Lite II
Phantom
Phantom II
Fuel Pressure, 0-15 PSI/Mech. Oil Pressure, 0-100 PSI/Mech. Oil Pressure, 0-200 PSI/Mech. Oil Pressure, 0-150 PSI/Mech. Water Temp, 140-280°F/6' Tubing Water Temp, 120-240°F/12' Tubing Water Temp, 120-240°F/6' Tubing Oil Temp 140-280°F/6' Tubing Oil Temp, 140-340°F/Mech. Oil Temp, 100-250°F/Elec.
ATM3311 ATM3321 ATM3322 ATM3323 ATM3331 ATM3332 ATM3333 ATM3341 – ATM3347
– ATM3621 – – ATM3631 ATM3632 – – – –
ATM4311 ATM4321 ATM4322 ATM4323 ATM4331 ATM4332 ATM4333 ATM4341 ATM4346 ATM4347
ATM4711 ATM4721 – – ATM4731 ATM4732 – ATM4741 – –
– ATM4921 – – ATM4931 ATM4932 – – – –
– ATM5721 – ATM5723 ATM5731 ATM5732 – ATM5741 – ATM5747
– ATM7521 – – – – ATM7532 – – –
LED Replacement Bulb Kits NEW!
Angle Rings NEW!
Upgrade standard gauge lighting to bright LED illumination. Compatible with all Auto Meter gauges (except Auto Gauge), and most in-dash tachometers.
Angled Rings allow adjusting gauges toward driver for improved readability. Molded, black plastic rings are sold in sets of three. Mounting bracket must be modified for installation.
Part No.
Description
ATM3284 .................. Red ATM3285 .................. Green ATM3286 .................. Blue
Replacement Bulbs And Sockets Part No.
Description
Part No.
Description
ATM2234 .................. Angle Ring Set, Auto Meter 2-1/16" Gauges ATM3244 .................. Angle Ring Set, Auto Meter 2-5/8" Gauges
NEW!
ATM3211 .................. For All Steel Case 2-5/8" Gauges And Tachs ATM3219 .................. Twist-In For Some Pro-Comp And Sport Comp Gauges
Temperature Adapter Fittings Hard-to-find fittings for use with Auto Meter mechanical oil, water and transmission temperature gauges. Extension adapters are also available where extra water passage clearance is needed. Part No.
Description
ATM2271 ...........3/8" NPT Temperature Extension (Brass) ATM2272 ...........3/8" Aluminum Adapter ATM2273 ...........1/2" Aluminum Adapter
Brett Mann
Photo: Doug Swift
2010
049-064OW10.indd 49
49
11/10/09 9:05:53 AM
2-5/8" Dia. Gauges Sport-Comp
Ultra-Nite Rugged, glow-in-the-dark gauges require no electrical power and have bright white dial faces, bright red pointers and teal bezels. Installation hardware included.
Sport-Comp Gauges have been widely used in racing since their introduction twenty years ago. The black dial face and bright red pointer lend a competition appearance that has assured their popularity. Available in mechanical and electrical versions. Installation hardware and 12 volt lighting included.
Carbon Fiber The Ultra-Lite series has been expanded to include Carbon Fiber gauges with authentic carbon fiber dials and silver bezels and pointers. Installation hardware and 12 volt lighting included.
Ultra-Lite Ultra-Lite Gauges are the hottest gauges in racing. Aluminum construction reduces weight while the satin aluminum dial face and bright fluorescent red pointer enhance appearance. Available in mechanical and electrical versions. Installation hardware and 12 volt lighting included.
Pro-Comp Auto Meter’s top-of-the-line series, Pro-Comp gauges are liquid-filled, making them ideal for cars that are subject to excessive vibration. A black dial face and bright fluorescent red pointer allow quick, easy gauge reading. Rugged gauges are available in mechanical and electrical versions. Installation hardware and 12 volt lighting included.
Ultra-Lite Liquid-Filled Ultra-Lite Liquid-Filled Gauges blend the look of the Ultra-Lite with the ruggedness of Pro-Comp liquid-filled gauges to make these the toughest gauges in racing. Installation hardware and 12 volt lighting included.
Phantom Phantom gauges have white dial faces, black bezels and bright red pointers for quick, easy reading. Installation hardware and 12 volt lighting included.
Description
Sport-Comp
Ultra-Lite
Ultra-Lite LFG
Ultra-Nite
Carbon Fiber
Pro-Comp
Phantom
Fuel Press., 0-15 PSI/Mech. Oil Press., 0-100 PSI/Mech. Oil Press., 0-200 PSI/Mech. Oil Press., 0-150 PSI/Mech. Water Temp., 140-280°/6' Tubing Water Temp., 120-240°/6' Tubing Water Temp., 120-240°/12' Tubing Temp., 140-340°/8' Tubing Oil Temp., 140-280°/6' Tubing Oil Temp., 140-280°/12' Tubing *Gauge Includes 4' Tubing
ATM3411 ATM3421 ATM3422 ATM3423 ATM3431 ATM3432 ATM3433 – ATM3441 ATM3443
ATM4411 ATM4421 ATM4422 ATM4423 ATM4431 ATM4432 ATM4433 ATM4435 ATM4441 –
ATM4611 ATM4621 ATM4622 – ATM4631 ATM4632 – – ATM4641 –
ATM4511 – – ATM4523 ATM4531/ATM4535* ATM4532 – – ATM4541 –
ATM4811 ATM4821 – – ATM4831 ATM4832 – – ATM4841 –
ATM5411 ATM5421 ATM5422 – ATM5431 ATM5432 ATM5433 ATM5435 ATM5441 ATM5443
ATM5810 ATM5821 – ATM5823 ATM5831 ATM5832 – – ATM5841 –
Tapered Ring Compressors NEW!
Cam Drives
CNC-machined from 6061-T6 aluminum, ring compressors have a true radius for each bore size. Each is Type 3 anodized for a long, corrosion free life, and prominently engraved with the bore size.
Put an end to a stripped or broken cam drive. ARP’s “bulletproof” Cam Drives are through-hardened, chrome moly with a Viton seal and anodized aluminum plate.
Part No.
Bore Size
ARP900-0000 ........... 4.000" ARP900-0200 ........... 4.020" ARP900-0300 ........... 4.030" ARP900-0400 ........... 4.040" ARP900-0600 ........... 4.060" ARP900-1250 ........... 4.125" ARP900-1450 ........... 4.145" ARP900-1550 ........... 4.155" ARP900-1650 ........... 4.165"
Part No.
ARP934-0005
Description
ARP934-0005 ........... 1" Cam Drive ARP934-0006 ........... 1-1/2" Cam Drive
Seal Plates Precision Seal Plates are CNC-machined 7075-T4 aluminum anodized to resist corrosion. Available in 2.100" and 2.380" to fit most OEM or aftermarket blocks. Part No.
Description
ARP934-0007 ........... 2.100" Cam Seal, SB Chevy ARP934-0008 ........... 2.380" Cam Seal, Dart Aluminum Block
50
ARP934-0006
ARP934-0007
2010
049-064OW10.indd 50
11/10/09 9:06:10 AM
High Performance And Pro Series Fasteners
Main Stud Kits NEW!
Recognized as the ultimate in automotive racing hardware, ARP fasteners are manufactured from either seamless 8740 Chrome Moly or ARP2000 material.
ARP main studs eliminate main cap “walk” and protect the threads in the cylinder block. Studs are manufactured from 8740 chrome moly steel, with 200,000 PSI tensile strength. Application
Cylinder Head Stud Kits NEW! Pro Series head stud kits include aerospace quality nuts and parallel-ground, hardened washers. Kits are offered with undercut short studs to effectively eliminate head gasket failure. Rated at 200,000 PSI tensile strength. Application
Hex Nuts
12-Pt. Nuts
Small Block Chevy 23° OEM Iron/Aluminum, ARP134-4001 ARP234-4301 Gen. III Vortec AFR, Brownfield ARP134-4001 ARP234-4301 Brodix -8,-10,-11, Track 1, ARP134-4001 ARP234-4301 Dart Sportsman, II, Edel. 18° With Raised Intake 3/8" – ARP234-4321 Brodix -12, 18° – ARP234-4303
12-Pt. Nuts U-Cut Studs
ARP234-4601 ARP234-4601 ARP234-4601 ARP234-4721 ARP234-4703
Cylinder Head Bolt Kits NEW!
Application
Hi-Perf. Hex
Hi-Perf. 12-Pt.
Pro Series 12-Pt.
ARP134-3601 ARP134-3701 ARP234-3701 ARP134-3602 ARP134-3702 ARP234-3702
Connecting Rod Bolts Standard High Performance Bolts Premium 8740 alloy chrome moly steel is heat treated to provide a tensile strength in the 200,000 PSI range, making these bolts much stronger - up to five times stronger than original equipment bolts. Wave-Loc® High Performance Bolts Manufactured from the same 8740 steel as ARP High Performance Bolts, but with Wave-Loc® shank design. Wave-Loc’s symmetrical waves have an effective interference range of .0005" to .007" for proper cap alignment and fit. Stress risers formed by standard rod bolts in factory bolt holes are virtually eliminated. Pro Series Wave-Loc® Bolts For the most severe applications, heavy-duty bolts are made from ARP2000 material with 200% longer fatigue life than 8740 chrome moly steel and a tensile strength of 220,000 PSI. Bolts are capable of exerting more than 12,000 lbs. clamping force. Application
Small Block Chevy SBC 400 SBC 350, 305, 307 SBC 383 Stroker/350 Rod Ford SB Ford 289-302, 5/16" Ford 2000cc Inline 4 Ford 2300cc Inline 4
High Perf.
High Perf. Wave-Loc®
Pro-Series Wave-Loc®
ARP134-6002 ARP134-6003 ARP134-6027
ARP134-6402 – ARP134-6403 ARP234-6403 – –
ARP154-6002 ARP151-6001 ARP151-6002
ARP154-6402 ARP254-6402 – – – ARP251-6402
4-Bolt Main
ARP134-5402 ARP134-5501 ARP134-5401 ARP234-5501 – ARP234-5503 – – –
– – ARP134-5601 ARP234-5601 ARP234-5602 ARP234-5603 ARP234-5604 ARP234-5606 ARP234-5801 ARP100-1402
ARP accessory stud kits include the required number of studs for each application, washers and either hex or 12-point nuts. Choose from black oxide coated or stainless steel. The stainless 300 material is not affected by extreme heat, eliminating retempering due to exhaust temperature cycles. Stud kits listed are rated at 170,000 PSI tensile strength. Black Oxide Hex Nuts
Black Oxide 12-Pt. Nuts
Valve Cover Stud Kits For Cast Aluminum Covers 1/4" With Nuts & ARP200-7603 ARP200-7613 Washers, 8 Pcs. 1/4" With Nuts & ARP200-7610 ARP200-7620 Washers, 12 Pcs. 1/4" With Nuts & ARP200-7604 ARP200-7614 Washers, 14 Pcs. 1/4" With Nuts & ARP200-7605 ARP200-7615 Washers, 16 Pcs. Distributor Stud Kits ARP130-1702 ARP130-1701 Chevy Header Stud Kits SB Chevy, 3/8" Dia., ARP100-1412 ARP100-1402 1.670", 12 Pcs. SB Chevy, 3/8" Dia., ARP100-1414 ARP100-1404 1.670", 14 Pcs. Oil Pan Stud Kits ARP234-1901 ARP234-1902 SB Chevy
Stainless 300 Hex Nuts
Stainless 300 12-Pt. Nuts
ARP400-7603
ARP400-7613
ARP400-7606
ARP400-7616
ARP400-7604
ARP400-7614
ARP400-7605
ARP400-7615
ARP430-1702
ARP430-1701
ARP-400-1412
ARP400-1402
ARP-400-1414
ARP400-1404
ARP434-1901
–
Thread Lubricants and Sealants ARP lubricants meet or exceed the tightening specifications provided with all ARP fasteners. Assembly Lubricant • Load range: 500,000 PSI • Effective lubrication range: -30° to 750°F • Premium Moly base with rust and corrosion inhibitors • Primary assembly lube for engine components, press fitting, etc. Part No.
Description
ARP100-9902 ........... 0.5 fl. oz. ARP100-9903 ........... 1.69 fl. oz. ARP100-9905 ........... 1 Pint ARP100-9906 ........... 1/2 Pint Can With Brush Top Thread Sealer ARP100-9904 • 1.69 fl. oz. container • Load range: 10,000 PSI • Effective lubrication range: -30° to 550°F • Teflon based with rust and corrosion inhibitors • Delivers a flexible leak-proof seal on aluminum, steel, stainless steel and plastic. Unaffected by coolants, water, gasoline, natural gas, or LPG.
2010
049-064OW10.indd 51
2-Bolt Main
Engine Accessory Stud Kits
Application
High Performance Series bolts are rated at 180,000 PSI and available with hex or 12-pt. heads. Pro Series bolts are rated at 200,000 PSI and are available only with 12-pt. heads. Most Pro Series applications have undercut short bolts to help eliminate head gasket failure. Kits include parallel-ground washers. Small Block Chevy OEM Iron, Brodix -8,-10,-11, Dart -11XB, LT-AFR, Pro-1 Brodix -12 Rollover, 18°
Small Block Chevy Small Journal, Without Windage Tray Small Journal With Windage Tray Large Journal, Without Windage Tray Large Journal, With Windage Tray Large Journal, Splayed Cap Bolts Large Journal, With Straps (F&R) Large Journal, Splayed Caps & Straps 400, With Windage Tray Dart “Little M”, Splayed Cap Bolts
51
11/10/09 9:06:24 AM
Blaze
Tribal
Venom
Warrior
Double Layer Nomex One-Piece Race Suits One-piece, ready-to-wear double layer suits use the same quality materials as the custom Nomex suits. Suits are offered in double or triple layer and made of top quality woven and fleece knit Nomex Aramid materials. Each suit incorporates a hidden, stretch knit waist, soft knit collar, front inset pockets, color knit cuffs, piping trim and SFI certification tag. Available in several attractive designs, suits provide unparalleled safety, exceptional comfort and professional appearance. Choose from Warrior (Black/Red or Black/Blue), Tribal, Blaze and Venom (Black/Red or Black/Blue. Meets SFI 3.2A/5 Certification.
Size
Warrior Black/Red Part No.
Warrior Black/Blue Part No.
Venom Black/Red Part No.
Venom Black/Blue Part No.
Blaze Black/Red Part No.
Tribal Black/Blue Part No.
Tribal Black/Red Part No.
Large X-Large
AWE252114424 AWE252114524
AWE252114423 AWE252114523
AWE252121424 AWE252121524
AWE252121423 AWE252121523
AWE252119424 AWE252119524
AWE252117423 AWE252117523
AWE252117424 AWE252117524
Nomex Custom Made Race Suits Nomex custom made race suits are identical to the ready-to-wear suits, offering superior flame and thermal protection, and providing drivers with a cool, comfortable suit. Please contact salesperson for a custom made race suit order form.
Patriot
Sniper
Formula 1
Champion
Turbo
Custom Made Sublimated Crew Shirts Sublimated crew shirts are not only attractive and comfortable, but one-of-a-kind. Unique Micro Fiber Polyester materials deliver exceptional cool and comfort to crew personnel. Six shirt minimum order. Please contact salesperson for a custom made crew shirt order form.
52
2010
049-064OW10.indd 52
11/10/09 9:06:29 AM
Cam Drive Oil Pumps Each Cam Drive Oil Pump has a pressure bypass, oil filter adapter and uses new 3-lobe timed aluminum scavenge rotors. Lightweight and efficient, they can pull more vacuum than spur gear designs. Pumps have drilled pressure gears and gun drilled idler shafts. Scavenge returns can be set up for -16 lines. Part No.
Description
Sprint Front Mount Oil Filter Bracket BAR8930 Filter Adapter mounts to existing water pump bolt holes on small block Chevys. Eliminates excessive plumbing and is typically used with a cam drive oil pump and a pressure feed at the front of the block. Accepts Fram HP-4 filter.
BAR9117-3CR .......... 3-Stage Cam Drive Pump BAR9117-4CR .......... 4-Stage Cam Drive Pump
Oil Filter Block-Off Plate BAR8910
90° Oil Filter Adapter BAR9012
Black anodized, billet aluminum Block-Off Plate fits small block Chevys, and is offered with -10AN or -12AN fitting for oil inlet or -10AN plug for filter block-off. Uses -10AN port plug.
Designed for small block Chevys with a dry sump system, Adapter mounts the oil filter at 90°. Block does not need machining for oil inlet fitting. Accepts Fram HP-4 filter.
O-Ring Kit For Oil Filter Adapters BAR8000
NEW VENDOR
Battery Tender Junior BAT021-0123 4-step, fully automatic charging and will maintain all types of batteries. Unit produces 750 milliamps @ 12 volts and has a twocolor LED state of charge indicator.
Battery Charger 25' Extension Lead BAT081-0148-25 Used to extend the lead of Battery Tender Junior, Plus, 4, 5, or 10 bank units. Note: Not For Use With The 6-Volt Battery Tender Plus Or Any Other Battery Tender Product With White Disconnect Plugs.
Waterproof 800 BAT022-0150-DL-WH No larger than a computer mouse and weighing only 1 lb., 800 milliamp battery charger includes many features common to the Battery Tender Junior. Fully encapsulated interior is protected from shock, vibration and moisture. Reverse polarity and short circuit protected.
4-Bank Battery Management System BAT022-0148-DL-WH Capable of maintaining up to four auto, motorcycle or ATV batteries at once with 1.25 amps @ 12 volts. Provides four-step charging and a 72 hour safety timer.
Battery Tender Plus BAT021-0128 4-step, fully automatic charging, produces 1.25 amps @ 12 volts to maintain all types of batteries. Two LED’s monitor battery condition and a 72 hour safety timer protects marginal batteries. Jason Blonde
Photo: Jim DenHamer
2010
049-064OW10.indd 53
53
11/10/09 9:06:35 AM
Ultra Series Helmets
Pro Series Helmets
The Bell Ultra Series offers advanced technology, aggressive aerodynamics, lightweight Light-Weave™ construction, nstruction, superb comfort, fit, and ventilation. Include E-Max inner liner. iner.
Pro Series helmets have unique Light-Weave™ construction w which combines three laminated composites to form a very strong, lilightweight outer shell. Helmets have comfortable fit, contemporary sstyling, and excellent ventilation.
Dominator Lightweight, aerodynamic helmet includes udes a front chin spoiler and a rear wicker to reduce wind buffeting and helmet lift. Fleeceecelined bag included. White only. Part No.
Size
BEL2000175.... 7-1/8 BEL2000130.... 7-1/4 BEL2000109.... 7-3/8
Part No.
GTX G Aerodynamic, lightweight helmet has an u ultra high speed design and an advanced vventuri style ventilation system. The E-Max Plus liner and Complex/Durablend interior P combine to deliver exceptional comfort. c Snell SA05 certification. S
Size
BEL2000107 .....7-1/2 BEL2000161 .....7-5/8 BEL2000201 .....7-3/4
MEASURING YOUR HEAD FOR OR PROPER FIT Measuring the head is required due to varying head shapes; heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. The circumference of the head should be measured at a point just above the eyebrows that results in the largest possible measurement. Take several measurements to be sure that you have the largest one. To assure proper fit and protection, refer to the Bell catalog. Standard Size
Inches
Size
Metric
XXS XS S M L XL XXL XXXL
21-1/4", 21-5/8" 22" 22-3/8" 22-3/4", 23-1/8" 23-1/2", 23-7/8" 24-1/4" 25-1/8". 25-1/2" 25-7/8", 26-1/4", 26-3/8"
6-3/4", 6-7/8" 7" 7-1/8" 7-1/4", 7-3/8" 7-1/2", 7-5/8" 7-3/4" 8", 8-1/8" 8-1/4", 8-1/2"
54, 55 56 57 58, 59 60, 61 62 64, 65 66, 67, 68
SFI Specifications / Snell Equivalent Chart SFI Spec 31.1A = Snell SA, (open-face) helmet SFI Spec 31.2A = Snell SA (full-face) helmet SFI Spec 41.1A = Snell M, (open-face) helmet SFI Spec 41.2A = Snell M (full face) helmet
Nylon Helmet Bag BEL2000054 Durable nylon bag has soft fleece lining to protect helmet and shield. Black bag with red accent fits all Bell helmets.
Helmet Skirt BEL2000131 NEW! Lightweight, stretchable skirts prevent dust and debris from entering the helmet via the neck port.
Tear-Offs NEW! Clear Tear-Offs are available thick (5 mil, 10-pack) or thin (2 mil, 20-pack). Part No.
Description
BEL2000008...... Thick (5 mil) Tear-Offs, Pack of 10 BEL2000006...... Thin (2 mil) Tear-Offs, Pack of 20
Detent to SRV Conversion Kit BEL2016034 NEW! Kit allows converting early model helmets to the late style, SRV shield pivot system. Includes a special washer that installs directly to the helmet, allowing an SRV slide and shield to work on a helmet with the detent mechanism.
54
Size
White
Black
Flat Black
7-1/8 7-1/4 7-3/8 7-1/2 7-5/8 7-3/4
BEL2000144 BEL2000080 BEL2000077 BEL2000066 BEL2000098 BEL2000148
BEL2000293 BEL2000271 BEL2000200 BEL2000216 BEL2000287 BEL2000288
BEL2001106 BEL2001107 BEL2001108 BEL2001109 BEL2001110 BEL2001111
Racer Series Helmets High performance, economical helmets made of Fiber-Tech™ which combines hand-laid lamination and thermal set resin to create a strong, standard weight shell.
BR-1 The BR-1 is available with advanced, futuristic styling, superior ventilation and an extra large eye port. Rear facing vents and full venturi ventilation provide exceptional comfort. White or flat black. Snell SA05 certification. Size
White
Flat Black
Small Medium Large X-Large
BEL2000250 BEL2000115 BEL2000116 BEL2000181
– BEL2001202 BEL2001203 BEL2001204
Replacement Helmet Components Part No.
Description
BEL2000002.......Helmet Shield Pivot Kit, ...........................Includes 2 Detent Washers, ...........................2 Pivot Screws and ...........................2 Lock Down Buttons BEL2000021.......Breath Deflector, ...........................Directs Breath Away ...........................From Face Shield BEL2000024.......Pivot Screw Hex Wrench, Eases Helmet Shield Replacement BEL2000027.......Eyeport Foam Kit, Replacement For All Closed Face Helmets BEL2000028.......Shield Visor Strips, Fits Any Bell Shield BEL2005742.......SRV Shield Pivot Kit
Inner X Balaclavas One size fits all. Offered in black only. Part No.
Description
BEL2003837....... Single Eye Opening Balaclava BEL2003842....... Dual Eye Opening Balaclava
2010
049-064OW10.indd 54
11/12/09 11:28:31 AM
Replacement Bell Helmet Shields Bell offers replacement shields, standard and fog-free, for all new and most older helmets. Shields are .125" thick with adjustable tear-off posts. Shield Restricted Visor (SRV) shields are also offered for selected Bell Racing 2005 models. Change shields regularly for better visibility and safety.
Helmet Model
Shield No.
Clear
Light Smoke
Dark Smoke
Snell 2005 Helmets / SFI 31.1 / 2005 Dominator, GTX *276SRV BEL1453 BEL1455 BEL1457 Infusion *285SRV BEL2005764 – BEL2005768 Dominator, GTX, BEL1068 BEL1077 BEL1069 K-1 Sport, Kart 2 Pro 276 Hornet 286 BEL2009583 – BEL2009585 M4, BR-1 *280SRV BEL1467 BEL1469 BEL1471 M2 Pro, M2, M2FA, 280 BEL1085 BEL1094 BEL1086 RS-5 Vortex, M3, M3 Xtra, *281SRV BEL1414 BEL1416 BEL1418 Full Face Sport Vortex, FA/TFA , Sport 3 281 BEL1102 BEL1111 BEL1103 Star 500 – – BEL1407 – Snell 00/05 Helmets X-15 282 BEL1120 – BEL1122 Excelerator 283 BEL1311 – BEL1317 Snell 95/00 Helmets Dominator, Fueling II, K-1, GTX, Kart Sport, 276 BEL1068 BEL1077 BEL1069 Kart Pro, Kart 2 Pro M2, M2FA, M2 Pro, Sport II FA, Sport II FA Pro, RS-5, 280 BEL1085 BEL1094 BEL1086 Racestar III Vortex, Vortex FA/TFA, Sport II, Sport 3, M3, M3 Xtra, XFM-1, 281 BEL1102 BEL1111 BEL1103 Racestar IV * Signifies "SRV" (Shield Restricted Visor) shield.
Amber
Blue Chrome
Gold Chrome
BEL1465 BEL1459 BEL1461 BEL2005770 BEL2005776 BEL2005774
Fog Free Light Smoke
Fog Fog Free Free Fog Free Fog Free Dark Fog Free Blue Gold Silver Smoke Amber Chrome Chrome Chrome
Silver Chrome
Fog Free Clear
BEL1463 –
BEL1454 BEL1456 BEL1458 BEL2005765 – – BEL1075 BEL1073
BEL1466 –
– –
BEL1067
BEL1177
–
–
BEL1071
– BEL2007794
– –
– BEL1477
– BEL1479
– BEL1468
BEL1084
BEL1178
–
–
BEL1088
BEL1092 BEL1090
BEL1087 BEL1181
BEL1420
–
BEL1424
BEL1426
BEL1415
BEL1417 BEL1419
BEL1421
BEL1101 –
BEL1179 –
– –
– –
BEL1105 –
BEL1109 BEL1107 – –
BEL1104 BEL1182 – –
BEL1123 –
– –
– –
– –
BEL1124 BEL1312
BEL1067
BEL1177
–
–
BEL1071
BEL1084
BEL1178
–
–
BEL1101
BEL1179
–
–
–
– – BEL1480
–
–
BEL1425
BEL1427
– –
– –
– –
– –
BEL1075 BEL1073 BEL1070 BEL1180
–
–
BEL1088
BEL1092 BEL1090 BEL1087 BEL1181
–
–
BEL1105
BEL1109 BEL1107 BEL1104 BEL1182
–
–
– –
– BEL1472
– BEL1474
BEL1126 –
– –
– –
–
– –
Inner X Underwear
Apex Driving Gloves
Exclusive Inner X fabric provides superior fire protection, comfort and moisture evaporation. Contrasting black and white design meets SFI 3.3 specifications.
Apex driving gloves use internally stitched fingers to maximize and provide comfort, exceptional steering wheel feel. Nomex construction gloves meet SFI 3.3/5 specifications and are available in black, red or blue.
Description
Medium
Large
X-Large
Short Sleeve Top BEL2003823 BEL2003824 BEL2003825 Long Sleeve Top BEL2003828 BEL2003829 BEL2003830 Bottom BEL2003833 BEL2003834 BEL2003835
BEL1464 –
– BEL1478
– –
BEL1070 BEL1180
BEL1462 –
Color
Medium
Large
X-Large
Black Red Blue
BEL2003692 BEL2003697 BEL2003702
BEL2003693 BEL2003698 BEL2003703
BEL2003694 BEL2003699 BEL2003704
Endurance Racing Suits Durable, affordable FR double layer suits have dual reinforced epaulets, hidden, boot cut cuffs, moisture wicking collar linings and innovative inner collars. All meet SFI 3.2A/5 specifications. Choose from one- or two-piece suits in black, red or blue. One-Piece Racing Suits Color
Medium
Large
X-Large
Black BEL2003617 BEL2003618 BEL2003619 Red BEL2003622 BEL2003623 BEL2003624 Blue BEL2003627 BEL2003628 BEL2003629 Two-Piece Racing Suits (Jacket and Pants) Color
Jacket Black Red Blue Pants Black Red Blue
Vision Driving Shoes XX-Large
BEL2003620 BEL2003625 BEL2003630
Medium
Large
X-Large
XX-Large
BEL2003647 BEL2003652 BEL2003657
BEL2003648 BEL2003653 BEL2003658
BEL2003649 BEL2003654 BEL2003659
BEL2003650 BEL2003655 BEL2003660
BEL2003662 BEL2003667 BEL2003672
BEL2003663 BEL2003668 BEL2003673
BEL2003664 BEL2003669 BEL2003674
BEL2003665 BEL2003670 BEL2003675
Vision driving shoes with Nomex lined interior and side panels meet SFI 3.3/5 specifications and offer superior comfort. Choice of black, red or blue. Size
Black
Red
Blue
8 8-1/2 9 9-1/2 10 10-1/2 11 11-1/2 12 13
BEL2003774 BEL2003775 BEL2003776 BEL2003777 BEL2003778 BEL2003779 BEL2003780 BEL2003781 BEL2003782 BEL2003783
BEL2003790 BEL2003791 BEL2003792 BEL2003793 BEL2003794 BEL2003795 BEL2003796 BEL2003797 BEL2003798 BEL2003799
BEL2003806 BEL2003807 BEL2003808 BEL2003809 BEL2003810 BEL2003811 BEL2003812 BEL2003813 BEL2003814 BEL2003815
2010
049-064OW10.indd 55
55
11/10/09 9:07:23 AM
NEW VENDOR
Race Shocks For the latest in shock valving technology in a compact package, look to AFCO by BENIC 16 series small body shocks. Through extensive research and development and years of experience, AFCO by BENIC is always at the forefront of the open wheel racing industry. With a dyno sheet included with each shock & no extra charge for special valving, you’ll always know what you’re getting and you’ll always get what you want. From junior sprints to full-size sprints, with or without wings, AFCO by BENIC has a package to put your race team in victory lane! For the best in quality in an adjustable package, look to AFCO by BENIC T2 adjustable shocks. T2 adjustable shocks are available in many different valving ranges in a single or double adjustable shock. Double adjustable shocks offer compression and rebound adjustments that are completely independent. Part No.
6" Stroke BSH1661S BSH1661-2S BSH1661-0.5S BSH1661-2S BSH1662-0.5S BSH1662-1 BSH1662S BSH1662-4S BSH1662-5S BSH1662-6S BSH1664S BSH1664-5S BSH1664-6S BSH1665-3S BSH1665-4S BSH1665S BSH1665-6S 7" Stroke BSH1674S BSH1674-5S BSH1674-6S BSH1675-2S BSH1675-3S BSH1675-4S BSH1675S BSH1675-6S 8" Stroke BSH1683-7S BSH1683-7.5S BSH1683-8S BSH1683-8.5S BSH1683-9S BSH1683-9.5S BSH1683-10S BSH1684S BSH1684-5S BSH1684-6S BSH1684-7S BSH1684-7.5S BSH1684-8S BSH1684-8.5S BSH1684-9S BSH1684-9.5S BSH1684-10S BSH1685-4S BSH1685S BSH1685-6S BSH1685-7S BSH1685-7.5S BSH1685-8S 9" Stroke BSH1694S BSH1694-5S BSH1694-6S BSH1694-7S BSH1694-7.5S BSH1694-8S BSH1695-4S BSH1695S BSH1695-6S BSH1695-7S BSH1695-7.5S
Stroke
Valving
Compressed Length
Extended Length
6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6"
1 1/2 1/0.5 1/2 2/0.5 2/1 2 2/4 2/5 2/6 4 4/5 4/6 5/3 5/4 5 5/6
11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75" 11.75"
17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75" 17.75"
7" 7" 7" 7" 7" 7" 7" 7"
4 4/5 4/6 5/2 5/3 5/4 5 5/6
12.75" 12.75" 12.75" 12.75" 12.75" 12.75" 12.75" 12.75"
19.75" 19.75" 19.75" 19.75" 19.75" 19.75" 19.75" 19.75"
8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8"
3/7 3/7.5 3/8 3/8.5 3/9 3/9.5 3/10 4 4/5 4/6 4/7 4/7.5 4/8 4/8.5 4/9 4/9.5 4/10 5/4 5 5/6 5/7 5/7.5 5/8
13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75" 13.75"
21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75" 21.75"
9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"
4 4/5 4/6 4/7 4/7.5 4/8 5/4 5 5/6 5/7 5/7.5
14.75" 14.75" 14.75" 14.75" 14.75" 14.75" 14.75" 14.75" 14.75" 14.75" 14.75"
22.75" 22.75" 22.75" 22.75" 22.75" 22.75" 22.75" 22.75" 22.75" 22.75" 22.75"
Race Shock Cover BSHSHOCKCOVER Part No. Key For Shock Absorbers BSH1661-2S Rebound Series Stroke Compression
Donny Schatz
56
Photo: Courtesy TSR
2010
049-064OW10.indd 56
11/10/09 9:07:36 AM
NEW VENDOR
1-5/8" Lightweight Steel Shock Absorbers
SZ Series Steel Shock Absorbers
Affordable 1-5/8" O.D. monotube gas shocks offer consistent, fade-free Bilstein performance for stock cars, modifieds and other open wheel cars. All have "off the shelf" valving and are available with 6" or 8" strokes. All shocks include rod ends and may be converted to coil-overs. Part No.
Extended Compressed Length Length Stroke
Rebound Compression Damping Damping
BILS6G1030 17.00" 11.00" 6" 1 3 BILS6G2020 17.00" 11.00" 6" 2 2 BILS6G2040 17.00" 11.00" 6" 2 4 BILS6G3010 17.00" 11.00" 6" 3 1 BILS6G3030 17.00" 11.00" 6" 3 3 BILS6G3050 17.00" 11.00" 6" 3 5 BILS6G3060 17.00" 11.00" 6" 3 6 BILS6G3535 17.00" 11.00" 6" 3-1/2 3-1/2 BILS6G4545 17.00" 11.00" 6" 4-1/2 4-1/2 BILS6G5555 17.00" 11.00" 6" 5-1/2 5-1/2 BILS7G1030 20.00" 12.00" 8" 1 3 BILS7G1090 20.00" 12.00" 8" 1 9 BILS7G2020 20.00" 12.00" 8" 2 2 BILS7G2040 20.00" 12.00" 8" 2 4 BILS7G3030 20.00" 12.00" 8" 3 3 BILS7G3050 20.00" 12.00" 8" 3 5 BILS7G3060 20.00" 12.00" 8" 3 6 BILS7G3535 20.00" 12.00" 8" 3-1/2 3-1/2 BILS7G4040 20.00" 12.00" 8" 4 4 BILS7G4545 20.00" 12.00" 8" 4-1/2 4-1/2 BILS7G5030 20.00" 12.00" 8" 5 3 BILS7G5555 20.00" 12.00" 8" 5-1/2 5-1/2 BILS7G6020 20.00" 12.00" 8" 6 2 BILS7G6565 20.00" 12.00" 8" 6-1/2 6-1/2 BILS7G9010 20.00" 12.00" 8" 9 1 BILS8M3030 21.90" 13.90" 8" 3 3 BILS8M3050 21.90" 13.90" 8" 3 5 BILS8M3060 21.90" 13.90" 8" 3 6 BILS8M4020 21.90" 13.90" 8" 4 2 BILS8M4040 21.90" 13.90" 8" 4 4 BILS8M4545 21.90" 13.90" 8" 4-1/2 4-1/2 BILS8M5030 21.90" 13.90" 8" 5 3 Notes: S8M series shocks have a 17.9" approximate mounting height, but may be used to replace 9" stroke shock absorbers in most applications. On four-bar late models and modifieds that hyper extend the left rear shock on corner exit, an S9Z series may be required to prevent the shock from "topping" out. Lengths include rod ends measured center-to-center.
Related Components Part No.
Description
BIL193252002...Rod Ends, Sold Per Pair BIL193103.........Coil-Over Kit For 1-5/8" (36mm) Shock Note: In coil-over applications, use 1-7/8" dia. springs with Bilstein SM Series (Mini) Racing Shocks.
Digressive valve, SZ monotube gas shocks are used on modifieds and late models. Shocks have 1.81" O.D. (46mm) plated steel bodies for consistent, fade-free performance. Shocks are available in 7" and 9" strokes and may be converted to coil-overs. Part No.
BILS7Z1090 BILS7Z3030 BILS7Z3040 BILS7Z3050 BILS7Z3060 BILS7Z3530 BILS7Z3545 BILS7Z4040 BILS7Z4555 BILS7Z5030 BILS7Z5050 BILS7Z5555 BILS7Z6010 BILS7Z6020 BILS7Z6040 BILS7Z6060 BILS7Z7030 BILS7Z7045 BILS7Z7060 BILS7Z8040 BILS7Z8060 BILS9Z0000 BILS9Z1060 BILS9Z2040 BILS9Z2060 BILS9Z2080 BILS9Z3030 BILS9Z3040 BILS9Z3050 BILS9Z3060 BILS9Z3530 BILS9Z4010 BILS9Z4020 BILS9Z4040 BILS9Z4555 BILS9Z5030 BILS9Z5050 BILS9Z5555 BILS9Z6010 BILS9Z6020 BILS9Z6040 BILS9Z6060 BILS9Z7030 BILS9Z7060
Extended Compressed Length Length Stroke
20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 20.00" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44" 23.44"
13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 13.14" 14.94" 14.94" 13.14" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94" 14.94"
7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9" 9"
Rebound Compression Damping Damping
80 lbs. 160 lbs. 160 lbs. 160 lbs. 160 lbs. 185 lbs. 185 lbs. 210 lbs. 235 lbs. 260 lbs. 260 lbs. 290 lbs. 320 lbs. 320 lbs. 320 lbs. 320 lbs. 380 lbs. 380 lbs. 380 lbs. 500 lbs. 500 lbs. Dummy 80 lbs. 120 lbs. 120 lbs. 120 lbs. 160 lbs. 160 lbs. 160 lbs. 160 lbs. 185 lbs. 210 lbs. 210 lbs. 210 lbs. 235 lbs. 260 lbs. 260 lbs. 290 lbs. 320 lbs. 320 lbs. 320 lbs. 320 lbs. 380 lbs. 380 lbs.
600 lbs. 160 lbs. 210 lbs. 260 lbs. 320 lbs. 160 lbs. 235 lbs. 210 lbs. 290 lbs. 160 lbs. 260 lbs. 290 lbs. 80 lbs. 120 lbs. 210 lbs. 320 lbs. 160 lbs. 235 lbs. 320 lbs. 210 lbs. 320 lbs. Dummy 320 lbs. 210 lbs. 320 lbs. 500 lbs. 160 lbs. 210 lbs. 260 lbs. 320 lbs. 160 lbs. 80 lbs. 120 lbs. 210 lbs. 290 lbs. 185 lbs. 260 lbs. 290 lbs. 80 lbs. 120 lbs. 210 lbs. 320 lbs. 160 lbs. 320 lbs.
SHOCK ABSORBER VALVING TECHNOLOGY Progressive: Early hydraulic twin-tube shocks had low speed damping to control body roll, but had a harsh ride over sharp bumps. Linear: Bilstein pioneered this deflective disc, gas pressure linear shock in the 1950’s to increase control at low speeds, improve handling through corners and provide more stability over bumps. Digressive: The latest development in shock absorber technology. Bilstein’s patented piston head provides an even greater level of control by damping slow suspension movements and preventing chassis from being upset by sharp bumps.
Nick Landon
Photo: Doug Swift
2010
049-064OW10.indd 57
57
11/10/09 9:07:47 AM
NEW VENDOR
SN Series Racer Rebuildable/ Revalveable Shock Absorbers
ASN Series Aluminum Threaded Body Shock Absorbers
Shock has 1.81" O.D. (46mm) nickel plated steel body, billet aluminum cap and a Schrader valve for use on modifieds, late models and sprints. Rebuildable/revalvable shock may be disassembled and assembled for quick repair or valving changes. Available with linear or digressive piston. Steps For Purchasing Rebuildable-Revalvable Shocks: 1. Choose shock length and style, 2. Choose corresponding valve kit, 3. Fill kit and, 4. Oil. Part No.
Description
BILB46-LTA7 7" Linear Piston BILB46-DTA7 7" Digressive Piston BILB46-LTA9 9" Linear Piston BILB46-DTA9 9" Digressive Piston
Extended Length
Collapsed Length
Stroke
20.23" 20.23" 23.60" 23.60"
13.35" 13.35" 15.08" 15.08"
6.88" 6.88" 8.52" 8.52"
Fill Kit BIL192116 Contains one MST gas tool (nitrogen gas pressure gauge), oil beaker and tools.
Threaded aluminum body, 1.81" O.D. (46mm) shock delivers world class performance for asphalt and dirt late models. Revalvable and rebuildable, shocks must be charged using Nitrogen Fill Tool (#BIL193000). Available with linear or digressive piston. Part No.
Stroke
Rebound Damping
Digressive BILASN7Z3030 7" 3 3 BILASN7Z4040 7" 4 4 BILASN7Z5030 7" 5 3 BILASN9Z3030 9" 3 3 BILASN9Z4010 9" 4 1 BILASN9Z4040 9" 4 4 BILASN9Z5030 9" 5 3 Linear BILASN7L162/55 7" 162 55 BILASN7L180/120 7" 180 120 BILASN9L208/72 9" 208 72 BILASN9L230/78 9" 230 78 Note: Front shocks are filled with nitrogen until pressure is 100-150 lbs., while rear shocks are typically filled to 90-120 lbs. Check nitrogen gas pressures every race day on any brand shock absorber with a Schrader valve. Related Components Part No.
Description
Valving Kits
BIL192190.........Coil-Over Kit For 2" Dia. ASN Series Shock BIL193000.........Nitrogen Fill Tool
Each kit contains valve stacks for two each of eight popular valvings.
Oil
Part No.
Part No.
Description
BIL193000
Description
BILMST3030 ......1 Quart Container BILMST3031 ......1 Gallon Container
BIL192149.........Linear Kit BIL192153.........Digressive Kit
Compression Damping
BILMST3030
BRB211
Racing Battery Mount Kits Quickly and easily install Braille No-Weight battery with traditional, or lay down aluminum mounts. Part No.
No-Weight Racing Batteries Enhanced Mat Technology and calcium full frame powerpath grids deliver the highest energy-to-weight levels in the industry. Designed specifically for a racing environment, AGM style batteries use high density oxide for true deep-cycling and the heavy duty, vibration-resistant power posts will not crack or deteriorate. Choose conventional or advanced, carbon composite/polymer plastic cases.
Standard Part No.
Carbon Fiber Part No. Weight
Dimensions (L. x W. x H.)
Cold Pulse Cranking Cranking Cranking Amps Amps Amps @ 32° F. @ 0° F.
BRBB106 BRBB106C 6.6 lbs. 5.8" x 3.4" x 4.1" 527 283 210 BRBB129 – 9.5 lbs. 5.8" x 3.4" x 5.1" 813 436 323 BRBB14115 BRBB14115C 11.5 lbs. 5.8" x 3.4" x 5.8" 904 486 360 BRBB2015 BRBB2015C 15 lbs. 6.8" x 3.4" x 6.1" 1067 574 425 BRBB2317 – 17 lbs. 6.8" x 4" x 6.1" 1191 641 475 BRB2317R* – 17 lbs. 6.8" x 4" x 6.1" 1191 641 475 BRBB3121 BRBB3121C 21 lbs. 6.6" x 5.2" x 6.8" 1380 742 550 *Battery includes right side positive terminals, which allows for side-byside configuration when used with BRBB2317.
58
Description
BRB211 ....... Conventional Battery Mount .................... For B106/B106C, B14115/B14115C, B2015/B2015C BRB1018 ..... Laydown Battery Mount For B106/B106C BRB1218 ..... Laydown Battery Mount For B129 BRB1418 ..... Laydown Battery Mount For B14115/B14115C BRB1821 ..... Universal Battery Mount Kit, Hold Downs And 10" J-Hooks BRB2018 ..... Laydown Battery Mount For B2015/B2015C BRB2318 ..... Laydown Battery Mount For B2317/B2317R BRB3118 ..... Laydown Battery Mount For B3121/B3121C
BRB2018
Electronic Battery Charger BRB1232 Safe, reliable electronic charger will extend the life of Braille or other 12-volt batteries. Battery charger has easy-touse, LED charging indicators, reverse polarity protection and heavy duty cables with alligator clips. Compatible with dry cell, AGM, gel and flooded lead-acid batteries.
2010
049-064OW10.indd 58
11/12/09 11:32:40 AM
-18 SP X SB Chevy Cylinder Head NEW!
IK Series SB Chevy Cylinder Heads Ideal for racing applications, IK Series 23° cylinder heads combine performance and value. Available in 180 or 200cc intake port versions with 64cc or 70cc combustion chambers, aluminum heads have phosphorous bronze valve guides, straight spark plugs, ductile iron valve seats and are compatible with accessory mounting. All heads are sold in pairs, as bare castings or fully assembled. Bare heads require valve job, porting and valve train components. Part No.
Intake Exhaust Comb. Description Runner Pattern Chamber
BRO1021000* Assembled 200cc Std. 64cc BRO1021001† Assembled 200cc Std. 64cc BRO1021002* Assembled 180cc Std. 70cc BRO1020000 Bare 200cc Std. 64cc BRO1020001 Bare 180cc Std. 70cc BRO1021004* Assembled 180cc Std. 64cc *1.250" dia. valve spring. †1.470" dia. valve spring.
Plug Type
Straight Straight Straight Straight Straight Straight
Intake Exhaust Valve Valve
2.020" 2.020" 2.020" N/A N/A 2.020"
1.600" 1.600" 1.600" N/A N/A 1.600"
Track 1 SB Chevy Cylinder Heads Track 1 and CNC Track 1, 23° aluminum heads deliver economical, out-of-the-box horsepower and are available bare or assembled. Assembled heads have blended bowls, matched ports, a performance valve job, 2.08" x 1.60" stainless valves, bronze guides, 7/16" screw-in studs, 5/16" guide plates, 1.550" dia. roller valve springs, 10° steel retainers and valve locks. Track 1 CNC-ported heads are fitted with titanium retainers. Bare heads require valve job, porting and valve train components. All heads are sold in pairs. Part No.
Description
BRO1000000 Bare, Track 1 BRO1001001 Assem., Track 1 BRO1008100 Assem., STS Track 1 BRO1008104 Assem., KC Track 1 BRO1008105 Assem., KC Track 1
Intake Exh. Comb. Plug Runner Pattern Chamber Type
Int. Valve
Exh. Valve
221cc 221cc 215cc 227cc 227cc
2.080" 2.080" 2.080" 2.080" 2.080"
1.600" 1.600" 1.600" 1.600" 1.600"
Std. Std. Std. Std. Std.
67cc 67cc 68cc 68cc 64cc
Angle Angle Angle Angle Angle
The most precise out-of-the-box 18° valve angle heads available. Head flows over 325 CFM @ .700 lift. Chambers can be flat milled into the mid 50cc range. Sold per pair. Part No.
Description
BRO1180000
Bare, 18 SP X
Intake Exh. Comb. Plug Runner Pattern Chamber Type
244cc
SP
68cc
Int. Valve
Exh. Valve
Angle 2.140" 1.600"
-16 SB Chevy Cylinder Head BRO1268000 NEW! High-flowing, fully CNC-ported Heads feature a new 16° valve angle, raised spark plug location, dual pattern exhaust, relocated valve centerlines, 269cc intake runner volumes and specially designed, 49cc combustion chambers. Compatible with Edelbrock EDE2955 or two-piece EDE2958/EDE2992 intake manifolds. Sold in pairs as bare castings, heads accept 2.180" intake and 1.625" exhaust valve.
SB Chevy Valve Covers Tall, cast aluminum valve covers have the Brodix logo and include studs, nuts, and gaskets. Part No.
Description
BROVC102 .........SB Chevy Valve Covers, Tall BROMG1000 ......SB Chevy Valve Cover Gaskets, Pair
-11 X SB Chevy Cylinder Heads The best performing out-ofthe-box 23° heads offered by Brodix. Available with spread exhaust ports, cylinder heads are recommended for 400+ cu. in. engines or smaller engines turning in excess of 7200 RPM. Heads require a special stud girdle, longer pushrods and the piston/valve spacing must be checked because of the 40/60 valve arrangement. Spring pockets may not be cut any deeper or any larger than 1.550". Valve length is 5.065". The head is milled and drilled for accessory mounting. The intake ports are not raised. Sold in pairs. Part No.
Description
Intake Exh. Comb. Plug Runner Pattern Chamber Type
BRO1110001 Bare, 11 SP X 225cc BRO1110002 Bare, 11 SP X/ASCS 215cc BRO1111002 Assem., 11 SP X 225cc
SP SP SP
67cc 67cc 67cc
Int. Valve
Stinson Racing
Exh. Valve
Angle 2.080" 1.600" Angle 2.080" 1.600" Angle 2.080" 1.600"
Rob Chaney
Photo: Mike Campbell
2010
049-064OW10.indd 59
59
11/10/09 9:08:34 AM
NEW VENDOR
Brad Penn Oils Truly Made In The U.S.A., American Refining Group's Bradford, Pennsylvania refinery is the home of “The Green Oil” that racers, engine builders and performance enthusiasts have come to know and trust. Buy it by the quart or by the case (12 qts.). Part Number
Description
Quarts BPO009-7126S......... Penn-Grade 1 Partial Synthetic Racing Oil, SAE 0w30 BPO009-7150S......... Penn-Grade 1 Partial Synthetic Racing Oil, SAE 10w30 BPO009-7119S......... Penn-Grade 1 Partial Synthetic Racing Oil, SAE 20w50 BPO009-7140S......... Penn-Grade 1 Racing Oil, SAE 40 BPO009-7115S......... Penn-Grade 1 Racing Oil, SAE 50 BPO009-7117S......... Penn-Grade 1 Racing Oil, SAE Nitro 70 BPO009-7120S......... Penn-Grade 1 Break-In Oil, SAE 30 BPO009-7766S......... Penn-Grade 1 Hypoid Gear Oil, 75w90 Cases - 12 Quarts BPO009-7126 .......... Penn-Grade 1 Partial Synthetic Racing Oil, SAE 0w30 BPO009-7150........... Penn-Grade 1 Partial Synthetic Racing Oil, SAE 10w30 BPO009-7119........... Penn-Grade 1 Partial Synthetic Racing Oil, SAE 20w50 BPO009-7140........... Penn-Grade 1 Racing Oil, SAE 40 BPO009-7115........... Penn-Grade 1 Racing Oil, SAE 50 BPO009-7117........... Penn-Grade 1 Racing Oil, SAE Nitro 70 BPO009-7120........... Penn-Grade 1 Break-In Oil, SAE 30 BPO009-7766........... Penn-Grade 1 Hypoid Gear Oil, 75w90
Billet aluminum Pro Series jack has been used by the winners of the Rockingham Pit Crew Championship. Hand assembled and tested prior to shipment. Choice of one or three pump versions in black or red. Jack handle must be purchased separately. Description
Black Part No.
Red Part No.
1-Pump Pro Series Jack 3-Pump Pro Series Jack
BRU004BK BRU006BK
BRU004RD BRU006RD
Lightweight, affordable aluminum jack shares many features of the Pro Series jack. Entry level jack, which is available in black, blue or red is designed for teams requiring pit stops. Jack handle sold separately. Black Part No.
Blue Part No.
BRU002BK BRU002BL
Red Part No.
BRU002RD
Jack Handles and Accessories Part No.
Description
BRU165 .............Warrior Jack Handle, 40" Long Aluminum BRU167 .............Pro Series Jack Handle, 48" Chrome Moly Steel BRU184 .............Dirt Wings, Stabilizes Jack On Uneven Ground
60
BPO009-7119S
BPO009-7120S
BPO009-7126S
BPO009-7140S
BPO009-7150S
BPO009-7766S
Choose between the Pro Regulator which has been modified for maximum air flow, and the economical Warrior Regulator, an all around, general purpose regulator. Part No.
Description
BRU312 .............Pro Regulator BRU312-1..........Warrior Regulator
Timing Boards NEW! Aluminum timing boards include shop data tear-off sheets to keep track of chassis set-up data. Boards include two Robic stop watches. Part No.
Warrior Series Aluminum Jacks
Warrior Series Jack
BPO009-7117S
Air Regulators NEW!
Pro Series Aluminum Jacks
Description
BPO009-7115S
Description
BRU2501BK .......With 2 Robic SC-501 Stop Watches BRU2505BK .......With 2 Robic SC-505 Stop Watches BRU2507BK .......With 2 Robic SC-507 Stop Watches BRU2808BK .......With 2 Robic SC-808 Stop Watches
Pro Toe Plates BRU193 NEW! CNC-machined aluminum toe plates deliver maximum accuracy without the deflection encountered with sheet metal toe plates.
2010
049-064OW10.indd 60
11/10/09 9:08:48 AM
Sprint Advantage Fit Seat
Defnder Head And Neck Restraint System
The integral head and shoulder system is compatible with HANS devices and other head and neck restraints. TIG welded and reinforced, the seats have contoured bottoms, right and left lateral supports, energy absorbent foam and fire-retardant, velour seat covers. Seats are well suited to sprint, midget and micro-midget race cars.
Fully SFI 38.1 certified, the Defnder head and neck restraint system combines the benefits of driver safety, comfort, ease of use and affordability. Flexible, Formfit belts follow the contours of the body, while an incorporated stabilizer bar eliminates upper torso pressure. The MotionMax tether system offers freedom of movement without sacrificing safety. Real-eaze quick release allows quickly fitting the system to the driver over the head with helmet in place, or it may be slid in place NEW! from behind. System may also be used with helmets that do not include a FIA anchor point hole with the included drilling template and hardware. Designed for use with mandatory 3" safety harnesses, restraint system is offered in black or green.
Part No.
Description
BUTADV14308 .......... 14.5" Seat Sprint Advantage BUTADV15308 .......... 15.5" Seat Sprint Advantage BUTADV16308 .......... 16.5" Seat Sprint Advantage BUTADV17308 .......... 17.5" Seat Sprint Advantage
Head, Shoulder And Leg Supports
Part No.
Description
BUTDEF-HRN-BLK .... Head And Neck Restraint System, Black
BUT2266-4101
BUT2361-4104
BUT2461-4102
Description
Black Cover Part No.
Blue Cover Part No.
Red Cover Part No.
LH 6" Head Support RH 6" Head Support LH Shoulder Support RH Shoulder Support LH Short Leg Support RH Short Leg Support
BUT2266-4101 BUT2276-4101 BUT2361-4101 BUT2371-4101 BUT2461-4101 BUT2471-4101
BUT2266-4102 BUT2276-4102 BUT2361-4102 BUT2371-4102 BUT2461-4102 BUT2471-4102
BUT2266-4104 BUT2276-4104 BUT2361-4104 BUT2371-4104 BUT2461-4104 BUT2471-4104
Single Layer 2" Head Supports Designed to reduce the risk of head or neck injury in the event of a crash. TIG-welded, .125" thick aluminum supports feature a solid 3/8" aluminum reinforcement rod, impact absorbing foam, velour fire-retardant cover and are compatible with all Butler Built seats. Description
Black Cover Part No.
Blue Cover Part No.
Red Cover Part No.
LH Head Support RH Head Support
BUT2262-4101 BUT2272-4101
BUT2262-4102 BUT2272-4102
BUT2262-4104 BUT2272-4104
Head And Shoulder Support System BUTADV22000-90
Ballistic, multi-layer Kevlar shield is designed to protect the driver's feet and legs from injury during catastrophic driveline failure. Quickly installed or removed, shield mounts to the bellhousing using included brackets and fasteners
Torque Tube Pad BUTBBP-4810 NEW! Lightweight, CarbonX flame retardant covered pad offers increased driver protection. Pad attaches to the torque tube using a built-in strap and Velcro closure, protecting the driver's ankles in the event of a crash. May be quickly removed for torque tube service.
Aluminum Steering Wheels Designed for sprint cars, 15" Steering Wheels are made from 1.250" aluminum tubing for maximum weight savings, better grip and less hand fatigue. Choose plain, black or red powder coated finish. Part No.
Bolt-on, universal support attaches to the Butler ProSportsman or any high back design seat to add critical protection for driver's head and shoulder area.
Description
BUT2711415F-P ....... Plain BUT2711415F-B ....... Black BUT2711415F-R ....... Red
Sportsman Advantage Universal NEW! Head And Shoulder Kits BUTADV22007-90 Add this head and shoulder support kit to any aluminum racing seat to create a containment seat. System includes a shorter left side head, shorter left side shoulder ports and specially coated foam covering. Sold complete with fire retardant black velour cover.
Torque Ball Shield BUT4800 NEW!
Sprint Car Drag Link Tether BUT4900-30 Sprint car Tether will retain the drag link during a crash and often prevent costly steering gear damage. 30" long.
NACA Ducts Part No.
sup-
Description
BUT7020 ...........Single Hose, Black, 10.5" x 6.0" x 4.5" BUT7021 ...........Single Hose, Clear, 10.5" x 6.0" x 4.5" BUT7023* ..........Sm. Single Hose, Clear, 8.0" x 5.375" x 4.0" BUT7024* ..........Sm. Single Hose, Black, 8.0" x 5.375" x 4.0" *Uses 2-1/2" hose. All others use 3" hose.
2010
049-064OW10.indd 61
10.5" BUT7020
61
11/12/09 12:15:32 PM
SB Chevy Wet Sump Oil Pans Competition Series 7" Deep Left turn, eight quart pans feature six trap doors, three runners, slosh baffles, windage trays with crank scrapers, oil level checks and temperature fittings. Part No.
Description
CAN11-120........SB Chevy Pre-'80, LH Dipstick CAN11-120M.....SB Chevy 1980-85, RH Dipstick CAN20-040........Oil Pump Pickup, Std. Vol. Pumps (MELM155) CAN20-070........Oil Pump Pickup, High Vol. Pumps (MELM155HV) CAN20-072........Oil Pump Pickup, High Vol. Pumps With 3/4" Tube (MELM155HV) CAN20-077........Oil Pump Pickup, For MEL10555 Pump CAN20-100........Oil Pump Pickup, For BB Chevy 5-Bolt Pump (MELM77)
Competition Series NEW! The 7" deep, “L”-shaped sump has competition baffling, six trap doors, bolt-in slosh baffle, windage tray with scraper and 9 qt. capacity. Part No.
SB Chevy Dry Sump Oil Pans Competition Series Shallow CAN12-101 Dry sump, 4-1/2" deep pan permits low engine mounting and includes crankshaft wiper, windage tray screen and 1/4" deep pickup trough. Made of steel, pan fits pre-'85 small block Chevys and has (2) -12AN pickup fittings on the right hand side.
Power Series Shallow General purpose 4-3/4" deep dry sump pans allow the lowest engine mounting possible and feature full length oil recovery pouches and crank scrapers, Teflon-coated windage trays and 1/4" deep pickup troughs. Pans include two pickup tubes, exiting the right side, with -12AN fittings. Part No.
Description
CAN12-110........SB Chevy pre-'85 Steel Pan, Low Ground Clearance CAN12-114........SB Chevy pre-'85 Steel Pan
Description
CAN11-180........Steel Pan, SB Chevy '85 and Earlier CAN20-040........Oil Pump Pickup, Std. Vol. Pumps (MELM155) CAN20-042........Oil Pump Pickup, Std. Vol. Pumps With 3/4" Tube (MELM155) CAN20-070........Oil Pump Pickup, High Vol. Pumps (MELM155HV) CAN20-072........Oil Pump Pickup, High Vol. Pumps With 3/4" Tube (MELM155HV) CAN20-077........Oil Pump Pickup, For MEL10555 Pump CAN20-100........Oil Pump Pickup, For BB Chevy 5-Bolt Pump (MELM77)
Power Series Deep CAN12-154 Power-saving 5-1/2" deep dry sump pan has a full length oil recovery pouch, removable Teflon-coated windage tray and crank scraper assembly, and 1" deep collection trough. Pan has two -12AN pickup tubes exiting the right side.
Power Series NEW! 7" Deep Long Sump
Oil Pan Accessories Inspection Plug CAN20-888
Steel, 8 qt. pan includes unique recovery pouch on the right side, 12" long x 15" wide sump with windage tray and built-in slosh baffle.
A 1" NPT bushing and plug that can be welded into a 1-1/2" dia. hole. For use where an inspection plug is required to verify the use of stock connecting rods.
Part No.
Description
CAN11-136........Steel Pan, SB Chevy '85 and Earlier CAN20-040........Oil Pump Pickup, Std. Vol. Pumps (MELM155) CAN20-070........Oil Pump Pickup, High Vol. Pumps (MELM155HV) CAN20-072........Oil Pump Pickup, High Vol. Pumps With 3/4" Tube (MELM155HV) CAN20-077........Oil Pump Pickup, For MEL10555 Pump CAN20-100........Oil Pump Pickup, For BB Chevy 5-Bolt Pump (MELM77)
Power Series Open Chassis Steel or aluminum pans hold 9 quarts and include 11-1/2" wide x 16" long sump, recovery pouch, bolt-in slosh baffle and windage tray. Part No.
Description
CAN11-186........Steel Pan, SB Chevy 1985 and Earlier CAN11-186A .....Aluminum Pan, SB Chevy 1985 and Earlier CAN11-188........Steel Pan, Pro Style, SB Chevy, Spread Oil Pan Rail CAN20-040........Oil Pump Pickup, Std. Vol. Pumps (MELM155) CAN20-070........Oil Pump Pickup, High Vol. Pumps (MELM155HV) CAN20-072........Oil Pump Pickup, High Vol. Pumps With 3/4" Tube (MELM155HV) CAN20-077........Oil Pump Pickup, For MEL10555 Pump CAN20-100........Oil Pump Pickup, For BB Chevy 5-Bolt Pump (MELM77)
Chevy Pressure Balanced Oil Pumps New pumps are reworked to provide a smooth continuous flow of oil throughout the RPM range. The bypass passages have been enlarged and a feeder groove added to limit cavitation (for high RPM racing operation). Pump housings bleed some of the high pressure back into the gears for smoother operation and more constant pressure. Part No.
Description
CAN21-500........SB Chevy Std. Volume CAN21-540........SB Chevy High Volume CAN21-560........SB Chevy High Volume With 3/4" Inlet
CAN21-500
Windage Trays Louvered and screen type, stamped steel trays keep oil off of the rotating assembly and in the sump where it belongs. Available for most applications. Mounting kit must be purchased separately. Part No.
Description
CAN20-908
Windage Trays CAN20-908........SB Chevy Pro Plus Louvered Windage Tray CAN20-911........SB Chevy Full Length Windage Tray Screen, LH Dipstick Windage Tray Mounting Kits CAN20-920........Mounting Kit For CAN20-911 CAN20-921........Mounting Kit For CAN20-908
62
2010
049-064OW10.indd 62
11/10/09 9:09:45 AM
Billet Aluminum Oil Filter Adapters Chevy Oil Filter Block-Off NEW! And Input Adapter CAN22-520
Billet Aluminum Oil Filter Adapters - Cont. Chevy Oil Bypass Eliminator CAN22-570
Engineered for dry sump, or wet sump oiling system with external pump. Bolts directly into the stock Chevy V-8 bypass mounting holes and includes O-rings and hardware.
Billet Chevy block-to-filter mount replaces the stock oil filter mount and does not have a bypass, eliminating the possibility of unfiltered oil entering the engine.
NEW!
Chevy Oil Input Sandwich Adapters
Chevy Remote Oil Filter Adapter
Simplifies the installation of external oil pumps or Accusumps by eliminating the need for a remote oil filter. Adapter has two oil input ports: one before filtration (for an external oil pump) and one after (for an Accusump). Part No.
Aluminum adapter is ideal for wet sump systems where a remote filter must be used. Inlet and outlet ports are 1/2" NPT.
Description
Part No.
CAN22-550........SB Chevy Oil Input Adapter CAN98-002........Replacement O-Ring Kit
NEW!
Chevy Oil Cooler Sandwich Adapters Use a remote oil cooler and retain the stock oil filter. Adapters lower the filter 1-1/2" and accept 1/2" NPT fittings. O-rings and hardware are included. Part No.
Description
CAN22-580........SB and BB Chevy w/Straight Inlet and Outlet Ports CAN98-002........Replacement O-Ring Kit
90° Rotating Remote Oil Filter Adapters NEW! The aluminum adapter’s 90°, 1/2" NPT inlet and outlet ports can be rotated, simplifying hose and fitting connections. Ideal when unable to use stock filter location.
Description
CAN22-540............... SB Chevy Remote Oil Cooler Sandwich Adapter, Goes to Cooler Before Filtration CAN22-541............... SB Chevy Remote Oil Cooler Sandwich Adapter, Goes to Cooler After Filtration CAN98-002............... Replacement O-Ring Kit
Part No.
Description
CAN22-592........Chevy, 13/16"-16 Thread and 3-1/4" Seal CAN22-595........Ford/Chrysler, 3/4"-16 Thread and 2-5/8" Seal CAN98-004........Replacement O-Ring Kit
Billet Remote Oil Filter Mounts NEW! Rigid, billet aluminum remote mounts accept spin-on oil filters. Mounts include two 1/2" NPT inlet and two 1/2" NPT outlet ports and may be plumbed right-to-left or left-to-right. Part No.
Description
CAN22-620........Remote Oil Filter Mount, Accepts Chevy Spin-On 13/16"-16 Filters CAN22-625........Remote Oil Filter Mount, Accepts Ford Spin-On 3/4"-16 Filters
Jeff Bloom
Photo: Jim DenHamer
Pro-A Connecting Rods Pro-H Connecting Rods One of the strongest, most durable H-beam Connecting Rods available. Carillo rods are constructed using high quality, certified materials to produce a rod that has exceptional strength-to-weight characteristics. Sold in sets of eight with premium WMC or CARR bolts.
Part No.
CRLC-327>-65850S-08 CRLC-327>-66000S-08 CRLC-350>-66000S-08 CRLC-350>-76000H-08 CRLC-350>-76000S-08
Crank Big Pin Bolt Pin End End Description Size/Type Length Dia. Width Bore
SB Chevy 3/8" CARR SB Chevy 3/8" CARR SB Chevy 3/8" CARR SB Chevy 7/16" WMC SB Chevy 7/16" CARR
5.850" 6.000" 6.000" 6.000" 6.000"
2.000" 2.000" 2.100" 2.100" 2.100"
.940" .940" .940" .940" .940"
.927" .927" .927" .927" .927"
Well suited to moderate horsepower engines, Pro-A connecting rods are significantly lighter and more economical than Pro-H rods. Although less machine time is involved, Pro-A rods are constructed using the same high quality steel and precision machining. Sold in sets of eight with premium WMC bolts.
Part No.
Big Pin Bolt Crank Pin End End Description Size/Type Length Dia. Width Bore
CRLC-283-1<A-66000H-08 SB Chevy 3/8" WMC 6.000" 2.000" .940" .927 CRLC-283-1<A-66125H-08 SB Chevy 3/8" WMC 6.125" 2.000" .940" .927" CRLC-283-1<A-66200H-08 SB Chevy 3/8" WMC 6.200" 2.000" .940" .927" CRLC-35-1<A-66000H-08 SB Chevy 3/8" WMC 6.000" 2.100" .940" .927" CRLC-35-1<A-66250H-00 SB Chevy 3/8" WMC 6.250" 2.100" .940" .927" CRLC-3LM-1<A-66250H-08* SB Chevy 3/8" WMC 6.250" 2.100" .940" .927" *Superlight Pro-A connecting rods, which weigh less than 500 grams, for engines that turn less than 7,000 RPM and make under 450 horsepower. Note: Pro-H and Pro-A connecting rods are available with CARR or WMC fasteners. WMC fasteners have a 220,000 PSI tensile strength. CARR fasteners have a 285,000 PSI tensile strength.
2010
049-064OW10.indd 63
63
11/10/09 9:10:02 AM
Small Neck High Pressure Radiator Caps
Sprint Car Radiators
Stantâ&#x20AC;&#x2122;s small, High Pressure Caps are available in several pressure ranges and can maintain the pressure consistently. Designed for small neck sprint car radiators Part No.
Description
CRR1000010130 ............Stant Racing Radiator Cap, 30 Lbs. CRR1000010361 ............Stant Racing Radiator Cap, 19-21 Lbs.
Stop Leak CRR1000000001 CRR2020225010 CRR2020225020
CRR2020201750
CRR2100100010
C&R manufactures lightweight, efficient Sprint Car Radiators that use no epoxy and deliver exceptional cooling. 20" x 22" Sprint car radiators feature four -10AN female port inlets, either 1-1/2" or 1-3/4" outlet and billet top neck which accepts a small radiator cap. Part No.
Description
CRR2020201750 ...... Sprint Radiator 20" x 16", 1-1/2" Outlet, Cross Flow CRR2020225020 ...... Sprint Radiator 20" x 22", 1-1/2" Outlet, Lightweight Core CRR2020225010 ...... Sprint Radiator 20" x 22", 1-1/2" Outlet CRR2020227510 ...... Sprint Radiator 20" x 22", 1-3/4" Outlet CRR2100100010 ...... Mini Sprint Radiator 17-1/2" x 12-1/2"
SB Chevy Wet Sump Oil Pans Competition Series 7" Deep Popular eight quart pans (including oil filter) have six trap doors, three crank scrapers, two runners, oil temperature fittings and oil check level plugs. CHACP100LT includes a removable, louvered windage tray. CHACP100KO includes louvered windage tray and a full length kickout. Part No.
Description
CHACP100 .........SB Chevy 1957-85 Oil Pan CHACP100LT......SB Chevy 1957-85 Oil Pan, With Louvered Windage Tray CHACP100KO.....SB Chevy 1957-85 Oil Pan, With Full Length Kickout and Louvered Windage Tray CHA100SB .........Oil Pump Pickup, High Vol. Pump, 5/8" Dia. (MELM55HV) CHA100BB .........Oil Pump Pickup, High Vol. BB Chevy Pump, 3/4" Dia. (MELM55HV) CHA1003SB .......Oil Pump Pickup, High Vol. BB Chevy Pump, 3/4" Dia. (MEL10555)
Competition Series Kickout NEW! Oil pans are 6-1/2" deep, yet have 7-quart capacity (including oil filter). Kickouts improve oil control and provide increased horsepower and the six trap doors, three crank scrapers, louvered windage tray, oil temperature fitting and oil level check plug in each pan make them a great bargain. CHACP106KO has a full length kick-out. Part No.
Description
CHACP106LT............. SB Chevy 1957-85 Oil Pan, With Louvered Windage Tray CHACP106KO............ SB Chevy 1957-85 Oil Pan, With Full Length Kickout and Louvered Windage Tray CHACP106LTRB ........ SB Chevy 1986-Up Oil Pan, With Louvered Windage Tray CHA106SB ................ Oil Pump Pickup, High Vol. Pump, 5/8" Dia. (MELM55HV) Note: Champ Pans will NOT work with a stock style dipstick in the block. The pans have a block-off on each pan rail for use on either LH or RH blocks-so the stock dipstick cannot reach the oil pan. Check the oil level from the supplied oil plug-if an extension is needed use CHAJR131 dipstick.
64
Prevent a DNF in the event of a radiator puncture, cracked cylinder head, or gasket problem. Stop Leak is non-ceramic and stays suspended in the water so that when the water is drained, all of the Stop Leak is drained with the water leaving no residue.
Water Treatment CRR1000000101 Protects against electrolysis and chemical corrosion, reduces foaming, cleans and conditions the entire cooling system, lubricates water pump, conditions pump seals and o-rings, Helps prevent sludge and scale.
Competition Series 8" Deep Eight quart (including oil filter) pan incorporates four trap doors, crank scraper, two runners, louvered windage tray, oil temperature fitting and oil check level plug. Part No.
Description
CHACP80LT........SB Chevy 1957-85 Oil Pan, With Louvered Windage Tray NEW! CHA80SB ...........Oil Pump Pickup, High Vol. Pump, 5/8" Dia. (MELM55HV) CHA80BB ...........Oil Pump Pickup, High Vol. BB Chevy Pump, 3/4" Dia. (MELM77HV) CHA1004SB .......Oil Pump Pickup, Melling 10555
SB Chevy Dry Sump Oil Pans Standard Competition Series CHACP150R12
NEW!
Steel 4-1/2" deep pan with two crank scrapers and a removable windage tray provides maximum oil flow to the pick-up. Pan has two -12AN fittings located on the right side.
Aluminum Competition Series Aluminum pan features a full length, right side kickout that extends all the way from the pan rail to the bottom of the pan. Pan includes an inspection hole, drain plug and sufficient clearance for a mechanical fuel pump. Part No.
Description
NEW!
CHAPRO170R2 ......... SB Chevy 1957-85, (2) -10AN Ports Right Side CHAPRO170R3 ......... SB Chevy 1957-85, (3) -10AN Ports Right Side CHAPRO180R2 ......... Dart Block, (2) -10AN Ports Right Side
2010
049-064OW10.indd 64
11/12/09 12:18:27 PM
NEW VENDOR
Trailer Accessories Affordable equipment for any race car trailer, Clear One components are built from impact resistant plastic with attractive black textured finishes. Mounting hardware is included with all products.
Small Door Cabinet CLRTC138
Vinyl Door Strips
Compact, lightweight cabinet has two shelves for aerosol cans or similar size items and a single paper towel holder. Measures 12" wide x 23.3" high x 4.8" deep.
Part No.
Base Door/Wall Cabinet CLRTC137 Cabinet has three shelves for aerosol cans and similar size items. Measures 22.5" wide x 32" high x 4.5" deep.
Clear vinyl door strips keep dirt and dust out and keep air conditioned trailers cool with the door open. All installation hardware is included. Description
CLRTC158 .........Vinyl Door Strips, Fits 4' x 6' Door Opening CLRTC159 .........Vinyl Door Strips, Fits 4' x 7' Door Opening
Canopy Straps CLRTC130 Wall mount, 2" wide adjustable straps hold 10' x 10' or 10' x 20' pit canopies during transport. 11.5" wide x 4.5" high x 1" deep
Jack Pouch CLRTC132 Door/Wall Cabinet With Paper Towel Holder CLRTC156 Large cabinet has three shelves for aerosol cans and similar size items, and a two roll paper towel holder. Measures 23" wide x 37" high x 4.5" deep.
Helmet Bays
Designed to be wall mounted, unit secures aluminum race jacks up and out of the way. Measures 18" wide x 25.5" high x 5.5" deep.
Tire Gauge Pouch CLRTC144 Stores tire gauges up to 3.25" wide and 1.75" deep. Measures 3.3" wide x 3.5" high x 2" deep.
Bays include foam-lined storage area for helmet, and an apparel hook. Deluxe unit includes a shelf for neck collar, gloves, etc. CLRTC151
Fuel Jug Racks
CLRTC116 .........Helmet Bay, 15" Wide x 13" High x 13" Deep CLRTC151 .........Deluxe Helmet Bay, 15.5" Wide x 14" High x 13" Deep
Part No.
Part No.
Description
Tie Down Hanger CLRTC100 Stores up to six tie downs. Measures 12" wide x 3" high x 3" deep.
Secures round or square fuel jugs in trailer. Offered in 1-, 2-, 3- or 4-bay versions. Description
CLRTC108 .........1-Bay, 12" Wide x 11" High x 12" Deep CLRTC109 .........2-Bay, 24" Wide x 11" High x 12" Deep CLRTC110 .........3-Bay, 36" Wide x 11" High x 12" Deep CLRTC111 .........4-Bay, 48" Wide x 11" High x 12" Deep
Aerosol Can Shelves “D” Cell Flashlight Holder CLRTC102
Lightweight, single shelf units keep aerosol cans handy and organized. Offered in two sizes.
Holds various “D” cell flashlights. Measures 3.5" wide x 7" high x 4" deep.
Part No.
Universal Cord/Hose Hanger CLRTC115
Oil Quart Racks
Rigid hanger stores electrical cords and air hoses. Measures 4.5" wide x 5" high x 4" deep.
Funnel Holder CLRTC134 Stores triangular funnels out of the way. Measures 17" wide x 3" high x 11" deep.
Collapsible Chair Rack CLRTC128 Rack secures up to three collapsible chairs. Measures 21.5" wide x 4" high x 6.5" deep.
Description
CLRTC117 .........8-Can Aerosol Can Shelf, 22" Wide x 4.5" High x 3.5" Deep CLRTC118 .........12-Can Aerosol Can Shelf, 33" Wide x 4.5" High x 3.5" Deep
Floor mounted racks store oil neatly. Offered in two sizes. Part No.
Description
CLRTC119 .........6-Quart Oil Rack, 16" Wide x 5.5" High x 5" Deep CLRTC120 .........12-Quart Oil Rack, 30.5" Wide x 5.5" High x 5" Deep
Jack Pads CLRTC147 Non-skid, 20,000 lb. capacity pads may be used for trailer tongue jacks, RV leveling jacks, etc. A nylon rope handle is included. Sold in pairs.
Shatterproof Mirror CLRTC145 Paper Towel Rack CLRTC141 Compact towel rack may be mounted horizontally or vertically. Measures 11.5" wide x 4.5" high x 5" deep.
High impact, 9" wide x 12" high x 1/8" thick plastic mirror mounts to front of trailer in a position that best allows viewing the coupler from the rear view mirror of the tow vehicle.
2010
065-080OW10.indd 65
65
11/10/09 9:13:40 AM
Moly/Graphite Coated Rod Bearings
Performance Engine Bearings
Clevite manufactures a full line of exclusive TriMetal™ copper lead high performance bearings. Choose the bearing series which best suits the intended application. Please specify size (Std., .001", .010", .020", etc.) when ordering. “P” Series - Traditional Clevite 77 TriMetal™ bearings have high crush qualities for maximum bearing retention, high eccentricity to account for bore distortion and reduced overlay thickness to prevent fatigue. “H/HN” Series - Race engine builders prefer their lack of flash plating, medium levels of eccentricity, enlarged chamfers for additional crankshaft fillet clearance and high crush. When a “D” is added to the part number suffix, bearings include dowel pin holes; an “X” suffix indicates bearings with .001" added oil clearance, while a “K” suffix indicates bearings which are coated with moly/graphite, an anti-wear agent that also offers protection through a broad temperature range. Note: “HN” series are only available as rod bearings and are engineered to provide increased crankshaft fillet clearance. Engine
P Series
HN Series
HND Series
HNDK Series
Chevy 1967-02 Small Block 262, 265, 267, 302, 305, 307, 350 Lg. Journal Rod Bearings M77CB663P M77CB663HN M77CB663HND M77CB663HNDK Rod Bearings, – M77CB1663H – – 1.888" Honda Sizing Main Bearings M77MS909P M77MS909H – – 1970-80 Small Block 400 Rod Bearings M77CB663P M77CB663HN M77CB663HND M77CB663HNDK Main Bearings, M77MS1038P M77MS1038H – – 400 Block/400 Crank Main Bearings, 400 Block/350 Crank M77MS1564P – – –
HNK Series
HXN Series
HXND Series
HXNDK Series
HXNK Series
M77CB663HNK M77CB663HXN M77CB663HXND M77CB663HXNDK M77CB663HXNK M77CB1663HK M77CB1663HX
–
–
M77CB1663HXK
M77MS909HK
–
–
M77MS909HXK
M77MS909HX
M77CB663HNK M77CB663HXN M77CB663HXND M77CB663HXNDK M77CB663HXNK M77MS1038HK M77MS1038HX –
–
–
–
M77MS1038HXK
–
–
–
Camshaft Bearings For Chevy M77SH290S For 1964-02 Small Block 283-400.
Ground Shipment Only
MLS (Multi-Layer Steel) Head Gaskets MLS gaskets have three layers of stainless steel for strength, rebound ability and resistance to corrosion. Outer layers are embossed with a fluoroelastomer rubber based material (Viton) to withstand heat and harsh sealing environments. Available in many different thicknesses. Gaskets are sold one per package. Part No.
Description
Chevy Small Block (Including SB2 And Gen. III LS1) CAGC5877-030 Cast Iron Or Aluminum Heads, Dart CAGC5877-040 Cast Iron Or Aluminum Heads, Dart CAGC5877-051 Cast Iron or Aluminum Heads, Dart CAGC5877-060 Cast Iron Or Aluminum Heads, Dart CAGC5878-040 Cast Iron Or Aluminum Heads, Dart CAGC5879-030 Cast Iron Or Aluminum Heads, Dart CAGC5879-040 Cast Iron Or Aluminum Heads, Dart CAGC5880-027 Cast Iron Or Aluminum Heads, Dart CAGC5880-040 Cast Iron Or Aluminum Heads, Dart CAGC5880-051 Cast Iron Or Aluminum Heads, Dart CAGC5880-066 Cast Iron Or Aluminum Heads, Dart CAGC5881-040 Cast Iron Or Aluminum Heads, Dart CAGC5881-066 Cast Iron Or Aluminum Heads, Dart CAGC5403-040 All Other SB Brodix Heads CAGC5403-051 All Other SB Brodix Heads CAGC5406-040 SB BD2000 Brodix CAGC5407-040 SB BD2000 Brodix CAGC5408-040 SB BD2000 Brodix CAGC5399-040 All Other SB Brodix Heads CAGC5400-040 All Other SB Brodix Heads CAGC5401-040 All Other SB Brodix Heads CAGC5402-040 All Other SB Brodix Heads CAGC5403-040 All Other SB Brodix Heads
Rear Main Seal CAGC5379 NEW!
Bore
Thk.
4.060" 4.060" 4.060" 4.060" 4.100" 4.125" 4.125" 4.165" 4.165" 4.165" 4.165" 4.200" 4.200" 4.200" 4.200" 4.135" 4.160" 4.200" 4.030" 4.125" 4.135" 4.160" 4.200"
.030" .040" .051" .060" .040" .030" .040" .027" .040" .051" .066" .040" .066" .040" .051" .040" .040" .040" .040" .040" .040" .040" .040"
Cyclo manufactures a complete line of cleaners, chemicals and lubricants for professionals and hobbyists. Part No.
Description
CCLC1 ...............Carb Clean, 13 oz. Spray Carb Cleaner CCLC5 ...............Carb Clean, 19 oz. Spray Carb Cleaner CCLC10 .............Break-Away, Penetrates/Lubricates, 13 oz. Aerosol Can CCLC27 .............Power Steering Fluid, 12 oz. Bottle CCLC28 .............Power Steering Fluid, 32 oz. Bottle CCLC30 .............Engine Clean, 16 oz. Aerosol Can CCLC31 .............Glass Clean, 23 oz. Aerosol Can CCLC33 .............Silicone Spray, 10 oz. Aerosol Can CCLC34 .............White Grease, 11 oz. Aerosol Can CCLC51 .............Radiator Anti-Rust, 11 oz. Bottle CCLC52 .............Radiator Stop Leak, 11 oz. Bottle CCLC111C CCLC405 CCLC55 .............Brake Fluid, 12 oz. Bottle CCLC56 .............Brake Fluid, 32 oz. Bottle CCLC111C*........Brake and Parts Clean, Red Can, 15 oz. Aerosol Can CCLC400** ........Heavy Duty Faster Super Penetrant, 11 oz. Aerosol Can CCLC405 ...........“Z” Lube, 12 oz. Aerosol Can, Lubricates Rod Ends *Meets OTC regulations for sale in California and other OTC states. ** This Formula is Flammable
Spark Plugs Plugs use an exclusive chromium-nickel ground electrode for superior erosion resistance and extended life. The copper core center electrode enhances thermal capacity for peak performance at all engine speeds.
For SB Chevy, 2-Piece. For More Info, See Spark Plug Cross Reference Chart On Page 229
66
2010
065-080OW10.indd 66
11/10/09 9:14:25 AM
NEW VENDOR
Quick Adjust® True® Roller Timing Chain Sets
Replacement Roller Timing Chains
Sets feature the patented Quick Adjust system, which allows valve timing adjustments without having to unload the valvetrain. Perform critical valve timing changes at the track to maximize performance or compensate for changing track or weather conditions. Timing sets also include billet steel, induction heat treated sprockets and an IWIS true roller timing chain with large, .250" dia. rollers for maximum durability and performance.
Ideal when replacing the timing chain from an existing Cloyes timing set.
Part No.
Description
Quick Adjust Part No.
Hex-A-Just Part No.
SB Chevy, 1955-Up SB Chevy "Rocket" Block
CLO9-130 CLO9-131
CLO9-130 CLO9-131
Quick Button™ Two-Piece Timing Covers
Description
CLO9-3700 ........SB Chevy, 1955-Up 265-400 CLO9-3746 ........SB Chevy “Rocket” Block
Two-piece covers allow adjusting of cam timing or end play without removing the entire timing cover, oil pan and damper. Die-cast aluminum cover is fitted with an O-ring seal which eliminates gaskets or sealants. Part No.
Make quick and precise cam timing changes with no troublesome offset bushings or keyways. Torrington thrust bearings reduce friction between the block and cam sprocket. Most sets are offered with .005" or .010" reduced center distance. Description
SB Chevy, 1955-Up 265-400 SB Chevy, 1955-Up 265-400 With BB Chevy Crank Snout SB Chevy, 1985-Up 305-350 SB Chevy “Rocket” Block
Std. Part No.
SB Chevy Cam Buttons
-.005" Part No.
-.010" Part No.
CLO9-3100A CLO9-3100A-5 CLO9-3100A-10 CLO9-3100B
Description
CLO9-221 ..........SB Chevy, 1955-up 265-400 CLO9-225 ..........SB Chevy, 1985-Up 305-350 CLO9-226 ..........SB Chevy, “Rocket” Block CLO9-227 ..........SB Chevy, BB Chevy Crank Snout
Hex-A-Just True® Roller Timing Chain Sets
–
–
CLO9-3145A CLO9-3145A-5 – CLO9-3146A CLO9-3146A-5 CLO9-3146A-10
Replacement Hex-A-Just Bushing CLOP9005
Cam buttons are used to control camshaft end play, and preventing “walking”. Billet steel buttons include Torrington bearings for superb performance and reliability. Part No.
Description
CLO9-200 ..........Cam Button, .925" Long For Old Style 3-Spoke Timing Covers CLO9-202 ..........Cam Button, .640" Long For Newer Style Timing Covers
SB Chevy Thrust Bearings And Wear Plates Part No.
Description
CLO9-201 ..........Steel Wear Plate, .031" Thick CLO9-220 ..........Thrust Bearing, .150" Thick, Replacement for Quick Adjust, Hex-A-Just, Original True and Billet True Timing Sets
RaceAir Pro CPT1000
Methanol Hydrometer Kit CPT3072
All-in-one digital, portable Weather Station has programs for fuel injection jetting and chassis set-up plus all original RaceAir features. Download data to a laptop or PC with optional PC Download Kit.
Measure the specific gravity of methanol to check for contamination and rule compliance.
EGT Plus Systems RaceAir The original RaceAir competition Weather Analyzer is easy to use, affordable, and completely portable. Unit’s automatic air sampling and internal fan assure consistent, reliable weather readings. Download data to a laptop or PC with optional PC Download Kit. Part No.
Description
CPT3000 ...........RaceAir CPT3001 ...........PC Download Kit For RaceAir
065-080OW10.indd 67
Thermocouple System can measure and record temperatures and RPM simultaneously. Simplifies correct jetting, ignition timing, etc. Unit can monitor temps for cylinder and collector exhaust gas, intake air, cylinder head, oil, and fuel. Displays as peak temps, or as progressive readings at certain points throughout the race. Operates on any 12 volt system, or may be remote controlled. Available in weld-on or clamp-on types. Includes a single probe. Part No.
Description
CPT4100 ...........EGT Plus Weld-On Kit CPT4105 ...........EGT Plus Clamp-On Kit Replacement Components CPT4110 ...........Weld-In Thermocouple CPT4115 ...........Clamp-On Thermocouple 2010
CPT4105
67
11/10/09 9:14:36 AM
Endure-X Solid Roller Lifters
Hi-Tech Stainless Roller Rocker Arms
Upgraded for even greater durability, EndureX lifters feature EDM Oil Injection technology, which provides a constant flow of pressurized oil to the bearing assembly, preventing the possibility of oil starvation. Lifters also incorporate removable, captured link bars, precision sorted bearings and wear resistant, tool steel axles. Sold in sets of 16.
Part No.
Description
Lifter Dia.
Pushrod Seat Location
Set Includes Lifters
The “toughest rockers in racing” are designed to minimize weight while adding durability and higher RPM capability. 15-5PH stainless steel, a superior alloy high in nickel and chromium, gives Hi-Tech Rocker Arms exceptional strength and fatigue resistance. Sold in sets of 16 with adjusting nuts. Part No. Link Bars
SB Chevy 265-400 All Centered (16) 818-1 (8) 818-L
COM891-16
1955-86 .842" Straight-Up Style Full Body Of 873-16, .842" .300" Taller Body Small Base Circle Cam .842" Applications
COM894-16
Offset Intake for More Pushrod Clearance
(8) Centered (8) 894C-1 (4) Rights (4) 894R-1 (8) 818-L (4) Lefts (4) 894L-1
COM818-16 COM871-16
.842"
Description
All Centered (16) 891-1 (8) 818-L
Hi-Tech Pushrods
Pro Magnum Roller Rocker Arms Made of 8650 chrome moly, Pro Magnum rockers offer the strength and reliability of stainless steel, yet they’re 5% lighter than 7075-T6 aluminum rockers. Pro Magnums are bulletproof and designed from the ground up, using advanced computer technology. Sold in sets of 16 with adjusting nuts. Part No.
One-piece, ball-type pushrods are made from .080" wall seamless 4130 chrome moly, heat treated to a hardness of 60 (Rockwell “C”) and black oxide finished for strength and durability. Length is stencilled on each pushrod. Sold in sets of 16 (-16 suffix) or individually (-1 suffix). Part No.
Dia./Wall Thk.
Description
Length
-.100" Short -.050" Short Std. Length +.050" Long +.100" Long +.150" Long +.200" Long +.250" Long +.300" Long Standard Length +.100" Long
7.700" 7.750" 7.800" 7.850" 7.900" 7.950" 8.000" 8.050" 8.100" 7.800" 7.900"
Pushrod Guide Plates NEW! A must for the high lift and spring pressure of per formance engines, guide plates are designed using a stereolithography process for ultimate fit. Exact stud placement and rounded contact points are two outstanding features of the black-oxidized guide plates. Sold in sets of 8. Part No.
Description
Type
SB Chevy 265-400 Raised SB Chevy 265-400 Flat SB Chevy 265-400 Flat SB Ford 289-351W Flat
Pushrod Size
5/16" 5/16" 3/8" 5/16"
Rocker Stud
Description
Rocker Arm Adjusting Nuts Alloy nuts provide ultimate strength and locking force. Stud girdle poly locks are ground for minimum runout and tapered for extra strength in the locking area. Sold in sets of 16. Part No.
Description
COM4508-16
Stud Girdle Adjusting Nuts Hi-Tech Polylock For Aluminum/Stainless/ Pro Magnum Rockers Hi-Tech Polylock For Aluminum/Stainless/ Pro Magnum Rockers Magnum Polylock Magnum Polylock High Energy Polylock
COM4600-16
COM4602-16 COM4603-16 COM4604-16
Stud Size
7/16" 7/16" 3/8" 3/8" 7/16" 3/8"
Rocker Arm Studs NEW! Choose from two series of rocker studs. Magnum rocker studs work well with moderate valve lift and spring pressures. The Hi-Tech Race studs are ideal for high RPM roller cam equipped race cars. Sold in sets of 16. Part No.
Description
Base Thread Size Length
COM4502-16 Magnum Studs 7/16" COM4503-16 Magnum Studs 7/16" COM4505-16 Hi-Tech Race Studs 7/16"
68
Rocker Ratio
COM1301-16E SB Chevy 265-400 3/8" 1.52 COM1302-16E SB Chevy 265-400 3/8" 1.6 COM1304-16F, E SB Chevy 265-400 7/16" 1.52 SB Chevy 265-400 7/16" 1.6 COM1305-16F, E E: Will not replace late model rail rockers. F: Must use screw-in studs and guide plates.
COM4601-16
COM4800-8 COM4808-8 COM4810-8 COM4816-8
Rocker Ratio
All Centered (16) 871-1 (8) 818-L
SB Ford 289-351W COM838-16* Standard, No Offsets .874" All Centered (16) 838-1 (8) 838-L *SB Ford 289-302 require cylinder head removal to install lifters.
Small Block Chevy COM7963-16 5/16"/.080" COM7970-16 5/16"/.080" COM7972-16 5/16"/.080" COM7974-16 5/16"/.080" COM7993-16 5/16"/.080" COM7994-16 5/16"/.080" COM7995-16 5/16"/.080" COM7996-16 5/16"/.080" COM7997-16 5/16"/.080" COM7913-16 3/8"/.080" COM7984-16 3/8"/.080"
Rocker Stud
COM1104-16E, F SB Chevy 265-400 7/16" 1.5 COM1105-16E, F SB Chevy 265-400 7/16" 1.6 E: Will not replace late model rail rockers. F: Must use screw-in studs and guide plates.
.680" .750" .680"
Stud Size
Stud Length
3/8" 7/16" 7/16"
1.750" 1.750" 1.750"
2010
065-080OW10.indd 68
11/10/09 9:14:52 AM
Dual Valve Spring Assemblies Comp Cams dual valve spring assemblies derive maximum performance from aggressive camshaft profiles in high RPM engines. Sold in sets of 16. Part No.
Description
COM924-16 1.510" 2-Spring w/Damper COM929-16 1.540" 2-Spring Assembly COM939-16 1.540" NASCAR COM950-16 1.470" 2-Spring Assembly COM954-16 1.525" 2-Spring Assembly COM985-16 1.430" 2-Spring COM986-16 1.430" 2-Spring COM987-16 1.430" 2-Spring COM999-16 1.550" H-11 Spring Assembly
I.D.
Seat Load
Open Load
Coil Bind
Rate Lbs./In.
Titanium Retainer
Steel Retainer
Cup Seat
Shims
.700" .755" .700" .720" .761" .700" .697" .697" .724"
112 @ 1.900" 150 @ 1.880" 138 @ 1.950" 133 @ 1.900" 210 @ 1.900" 165 @ 1.750" 132 @ 1.750" 121 @ 1.800" 196 @ 1.900"
355 @ 1.200" 415 @ 1.280" 419 @ 1.350" 332 @ 1.300" 523 @ 1.250" 346 @ 1.250" 293 @ 1.250" 343 @ 1.200" 700 @ 1.150"
1.200" 1.180" 1.225" 1.200" 1.178" 1.150" 1.150" 1.150" 1.090"
347 442 462 333 483 366 322 370 633
COM732/721 COM732/721 COM732/721 COM730 COM732/721 COM730 COM730 COM730 COM732/721
COM741 COM741 COM741 COM740/743 COM741 COM740 COM740 COM740 N/A
COM4700/COM4770 COM4700/4772/4773 COM4700/4770/4771/4783 COM4781/4782 COM4700/4781/4782 N/A N/A N/A COM4700/4781/4782
COM4757 COM4757 COM4757 COM4755 COM4757 COM4754 COM4754 COM4754 COM4757
Steel Retainers Comp Cams steel retainers can handle the higher pressures developed by large diameter valve springs. Retainers are machined from 4140 chrome moly, finished in black oxide and designed for positive location when combined with Comp Cams high quality valve springs. For superior strength and stability, Comp Cams also offers 10 degree retainers and 10 degree valve locks. Sold in sets of 16. Part No.
Description
Lock Angle
Valve Stem Size
Valve Spring Diameter
A
Dimensions B
COM740-16 COM741-16 COM742-16 COM747-16 COM748-16 COM749-16 COM750-16
Super Lock Retainer Super Lock Retainer Chevy 283-400 Super Lock Retainer Super Lock Retainer Super Lock Retainer Super Lock Retainer
10° 10° 7° 10° 10° 10° 10°
All All 11/32" All All All All
1.437"-1.500" 1.500"-1.550" 1.250" 1.437"-1.500" 1.500"-1.550" 1.500"-1.550" 1.250"
.690" .690" .650" .690" .710" .745" .735"
1.060" 1.115" .870" 1.050" 1.095" 1.125" .870"
C
1.400" 1.500" 1.230" 1.400" 1.500" 1.500" 1.240"
Titanium 10° Retainers Titanium is stronger and lighter than steel and can stand up to high pressure springs. American made from the finest 6AL4V alloy for maximum stiffness and minimal warpage. See chart for dimensions. Sold in sets of 16. Part No.
Description
Lock Angle
Valve Stem Size
COM720-16 COM721-16 COM729-16 COM730-16 COM731-16 COM732-16 COM733-16 COM735-16 COM738-16
Double Lightweight Double Lightweight Double Super Lock Retainer Double Super Lock Retainer Double Interference Super Lock Retainer Double Super Lock Retainer Double Super Lock Retainer Triple Super Lock Retainer Double Super Lock Retainer
10° 10° 10° 10° 10° 10° 10° 10° 10°
All All All All All All All All All
Valve Spring Diameter
Prevents wear at the front of the block. Minor machining is required when used with a stock type timing set. Part No.
Description
Engine Break-In Oil Additive COM159
Thrust Buttons NEW! Cam thrust buttons ride between the front of the timing gear and the back of the timing cover to hold the cam in its proper location. Available in solid nylon and roller thrust bearing versions. Description
Description
COM201 ............SB Chevy 265-400 Wear Plate, .030" Thick COM3120TB ......SB Ford 289-351W OEM Cam Plate and Single Bearing
COM4760 ..........Bushing Set (0°, 2°, 4°, 6°, 8°) COM47602 ........Bushing, 2°, 5-Pack COM47604 ........Bushing, 4°, 5-Pack
COM200 ............Roller Button SBC 265-400 C.I., .795" Length COM202 ............Nylon Thrust Button SBC 265-400, 90° V6, .810" Length
C
Thrust Bearings And Wear Plates NEW!
Bushings accurately position the camshaft and provide the easiest way to change the degree of the cam. 5 per package. Requires 13/32" drill bit for installation.
Part No.
Dimensions B
1.500-1.550" .798" 1.198" 1.437" 1.500-1.550" .708" 1.108" 1.437" 1.500"-1.550" 1.500" 1.135" .730" 1.437"-1.500" .700" 1.065" 1.437" 1.500"-1.550" .800" 1.100" 1.437" 1.500"-1.550" .710" 1.110" 1.500" 1.625" .765" 1.180" 1.500" 1.625" .870" 1.180" 1.500" 1.500"-1.550" .730" 1.120" 1.500"
Degree Bushings NEW!
Part No.
A
COM200
Provides additives previously not in off-the-shelf motor oils. Compatible with petroleum, blended or synthetic motor oils. Protects during engine break-in and against premature camshaft, lifter and valvetrain failure. 12 oz. bottle.
2010
065-080OW10.indd 69
69
11/10/09 9:15:01 AM
Valve Locks 7° Locks are recommended for light valve spring loads. Valve locks are available in stamped, hardened or premium machined steel versions for wear resistance and offer the same accurate valve spring location as Super Locks with no need to change to 10° retainers. Sold in sets of 16 pair (32 pieces). Part No.
Description
Lock Angle
Valve Stem Size
COM600-16 COM601-16 COM648-16
Hardened Steel, Single Groove Hardened Steel, Single Groove Machined Steel, Single Groove
7° 7° 7°
5/16" 11/32" 11/32"
Super Locks Super Locks are machined with a 10° angle for better load distribution over the retainer to eliminate "pull through". Super Locks fit any Comp 10° retainer. Sold in sets of 16 pair (32 pieces). Part No.
Valve Lock Angle Stem Size
Description
COM611-16 Lock With Lash Cap Recess COM613-16 Lock Without Lash Cap Recess COM614-16 Lock +.050" Inst. Ht. Without Lash Cap Recess COM618-16 Lock With Lash Cap Recess COM630-16 Lock - 050" Inst. Ht. With Lash Cap Recess
10° 10° 10° 10° 10°
11/32" 11/32" 11/32" .310" 11/32"
Lash Caps Special hardened steel lash caps protect the tips of valve stems, especially when a radical cam profile with lots of duration and valve lift has been selected. Part No.
Description
Thickness
Valve Stem Size
Hardened Lash Cap Hardened Lash Cap
.080" Thick .080" Thick
5/16" 11/32"
Valve Spring Shim Variety Packs Part No.
Thickness
Quantity
O.D.
COM4753 COM4754 COM4755 COM4757 COM4756
.015", .030", .060" .015", .030", .060" .015", .030", .060" .015", .030", .060" .015", .030", .060"
16 Each Size 16 Each Size 16 Each Size 16 Each Size 16 Each Size
1.250" 1.437" 1.480" 1.500" 1.640"
Pushrod Length Checker COM7901-1 Determine correct pushrod length quickly and easily when building race engines. Made from a thin wall 5/16" pushrod that is cut and threaded. Checker has 5/16" ball on each end and extends from 7.5" to 8.7".
Valve Train Assembly Spray COM106 Lubricant clings to components to protect valve springs, rocker arms and pushrods at initial start-up. Ground Shipment Only
Bronze Distributor Gears A necessity when using a roller camshaft. Gears are high strength, made from Ampco-45 extruded aluminum bronze to resist wear. Description
Comp Cams’ spring seat cups and locators can withstand the extreme spring pressures and high RPM generated by modern race engines. Hardened alloy seats protect the head and shim. They also locate and hold the spring in place. Sold in sets of 16. Part No.
Description
Thk.
I.D.
O.D.
Fits Spring O.D.
Fits Spring I.D.
COM4700-16 COM4702-16 COM4704-16 COM4708-16 COM4770-16 COM4771-16 COM4772-16 COM4773-16 COM4774-16 COM4775-16 COM4776-16 COM4777-16 COM4778-16 COM4780-16 COM4781-16 COM4782-16 COM4783-16 COM4784-16 COM4785-16 COM4786-16
Spring Seat Cup Spring Seat Cup Spring Seat Cup Spring Seat Cup Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator Spring Locator
.060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060" .060"
.640" .640" .640" .640" .585" .570" .570" .630" .570" .630" .570" .630" .570" .630" .570" .630" .630" .570" .570" .570"
1.670" 1.730" 1.570" 1.780" 1.500" 1.550" 1.550" 1.550" 1.625" 1.625" 1.550" 1.550" 1.550" 1.550" 1.550" 1.550" 1.550" 1.550" 1.550" 1.635"
1.565" 1.650" 1.475" 1.690" – – – – – – – – – – – – – – – –
– – – – .690" .690" .750" .750" .765" .765" .790" .790" .730" .730" .715" .715" .690" .735" .810" .870"
Stud Girdles NEW!
COM620-16 COM621-16
Part No.
Valve Spring Seat Cups And Locators
Stud girdles are made of rugged 6061-T6 aluminum, and tie the rocker studs together for alignment and durability. Sold in pairs. Complete with nuts. Part No.
Description
Stud Size
COM4004 COM4007 COM4009
SB Chevy Spring Loaded SB Chevy Solid Bar SB Chevy Solid Bar
7/16" 3/8" 7/16"
Rev Kit COM4000 Extruded aluminum rev kit prevents oil pressure loss in the event of a pushrod or rocker arm failure. Kit includes springs and buttons and fits all 265-400 Chevy with .842" tappets.
SB Chevy Roller Cam Bearing Kit COM350RCB-KIT Steel jacketed, needle roller bearings are encapsulated for easy installation in place of traditional cam bearings. Kit will decrease friction and increase oil control. Bearings fit all small block Chevys and small block 360 Chryslers with #1 through #5 camshaft journal diameters of 1.968".
COM410 ............SB and BB Chevy, .500" Dia. COM412 ............SB and BB Chevy, .491" Dia.
70
2010
065-080OW10.indd 70
11/10/09 9:15:10 AM
NEW VENDOR
Port-A-Cool Portable Cooling CSTPCA-K The Port-A-Cool system kit uses freeze spray supplied from an aerosol can. The system can be activated as often as needed by the user. Depress the valve on the spray can for a few seconds, and the spray will be circulated through the Cool Shirt for several minutes of immediate heat relief. Basic system includes all fittings and tubing to supply the freeze spray, one can of spray and a can holder with belt loop. Cool Shirt must be purchased separately. Additional cans of freeze spray are available. Part No.
Description
CSTPC-C............Replacement Port-A-Cool Can
Cool Shirts Compatible with all Cool Shirt systems, shirts are available in three styles; white cotton short sleeved, blue cotton short sleeved, and Firewear long sleeved. Firewear's unique fiber emits a noncombustible gas when exposed to flame which smothers the flame much like a fire extinguisher. Up to 50 ft. of medical grade capillary tubing is securely stitched to the front and back of each shirt. Size
Blue Cotton Short Sleeved
White Cotton Short Sleeved
Firewear Long Sleeved
Small Medium Large X-Large XX-Large
CSTBCW-SM CSTBCW-MED CSTBCW-LG CSTBCW-XL CSTBCW-XXL
CSTCW-S CSTCW-M CSTCW-L CSTCW-XL CSTCW-XXL
CSTFWS-LS-SM CSTFWS-LS-MED CSTFWS-LS-LG CSTFWS-LS-XL CSTFWS-LS-XXL
NEW VENDOR
Severe Duty Cutaway Roller Lifters
Stainless Steel Rollerized Rocker Arms
Ideal for high RPM and high cylinder pressure, lightweight lifters have billet alloy bodies, and heavy duty blades which are raised for use with late model blocks. “HIPPO” (Hi-Pressure Pin Oiler) lifters have a .024" orifice to direct oil to the needle bearings, improving durability. Choose standard or offset designs. Sets of 16.
Rockers are made of heat treated 17-4PH stainless steel and fitted with oversized needle bearings, sure-lock rocker nuts and ball race steel tip rollers. Lightweight, narrow body rockers clear large diameter valve springs or high lift camshafts. Sold in sets of 16.
Part No.
Description
CRO66215-16 ..............SB Ford 221-351W CRO66215H-16 ............SB Ford 221-351W, “HIPPO” CRO66378H-16 ............SB Ford 221-351W, Offset Int., .874" Dia. "HIPPO" CRO66290-16 ..............SB Chevy 262-400, .842" Dia. CRO66290H-16 ............SB Chevy 262-400, .842" Dia., “HIPPO” CRO66292-16 ..............SB Chevy 262-400, Offset Int., .842" Dia. CRO66292H-16 ............SB Chevy 262-400, Offset Int., .842" Dia., “HIPPO” CRO66292X874-16 ......SB Chevy 262-400, Offset Int., .874" Dia.
“Hi-Seat” Offset Roller Lifters .180" offset, built-in rev kit buttons and “Hi-Seat” pushrod design allow use of shorter pushrods to reduce flex and weight. “HIPPO” (Hi-Pressure Pin Oiler) lifters have .024" orifices to direct oil to the needle bearings. Set of 16. Part No.
Part No.
Application
Ratio
Stud
CRO73601-16 CRO73641-16
SB Chevy 265-400 SB Chevy 265-400
1.5 1.6
7/16" 7/16"
Sportsman Connecting Rods 4340 chrome moly steel rods have 3/8" cap screws for easier cap removal and replacement. Rods are bushed and sold in weight matched sets. Use with applications up to 500 horsepower. Sold in weight matched sets. Big End Pin End Big End Bore Bore Width
Part No.
Application
Length
CROSP93205B-8 CROSP93206B-8 CROSP91225B-8
SB Chevy SB Chevy SB Ford
5.700" 2.225" .927" 6.000" 2.225" .927" 5.155" 2.239" .912"
.941" .941" .832"
Description
CRO66275-16 .......... SB Chevy 262-400, .842" Dia. CRO66275H-16 ........ SB Chevy 262-400, .842" Dia., “HIPPO”
Radius “Rod Ruler” COL21790 Quickly and accurately measure tie rods, trailing arms, upper third links or any linkages fitted with rod ends. Stepped boss automatically aligns the rod end on center for a perfect measurement. Compatible with 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4" rod ends, linkages up to 36" long, or torque absorbers with up to 5-1/2" dia. springs.
2010
065-080OW10.indd 71
71
11/10/09 9:15:25 AM
NEW VENDOR
Diaphragm Bleeder Kit
Pneu Bleeder Kits
Works on the same principal as a High Speed Bypass. Preset spring pressure against a Diaphragm controls the amount of air that passes through the port. Releases air instantly in a 360 degree pattern. No compensation or guesswork is required. Repeats within 2/10 of a pound. Using 4 different Springs, unit has a range of 2 to 30 pounds.
Part No.
Part No.
Description
CBL1875-P ........For Winters L/W Axle, 1.875" CBL2055-P ........For Winters U/W, 2.055" CBL1900-P ........For DMI And Frankland, 1.900" Related Components Part No.
Description
CBLHOSE ...........Nylon Hose For Kits CBLFILTER .........Air Filter
Description
CBL1875-D........For Winters L/W Axle, 1.875" CBL2055-D........For Winters U/W, 2.055" CBL1900-D........For DMI And Frankland, 1.900" Related Components Part No.
Description
CBLHOSE ...........Nylon Hose For Kits CBLFILTER .........Air Filter
Diaphragm Repair Kits CBLREPAIRKIT-D
Pneu Bleeder Repair Kits CBLREPAIRKIT-D Includes two bleeder inserts, two wheel inserts and a 3' hose.
Bleeder Puller CBLPULLER
Includes two bleeder inserts, two diaphragms and a 3' hose.
Wet Sump Oil Pans SB Chevy Oil Pans Similar to other C-Line pans with the addition of a 1" “power pouch” on the right side. Pouch provides an easy exit for oil thrown off of the rotating assembly and can add up to 10 horsepower. Pan has a 7-1/4" deep sump. Part No.
Description
Dry Sump Oil Pans SB Chevy Dart/Rocket Block Oil Pan CLN11916 Aluminum oil pan fits dirt chassis with Dart/Rocket blocks and no crossmember under engine. Pan is 6-1/2" deep with three pickup fittings on the right hand side.
CLN11003 .........SB Chevy Oil Pan, Pre-'80 LH Dipstick, 2-Pc. Rear Seal CLN20322 .........Oil Pump Pickup For MEL10555
SB Chevy NEW! Dart/Rocket Block Oil Pan Steel pan fits Dart/Rocket blocks with spread rails. The sump is 7-1/2" deep and holds 9 quarts. Full length windage tray and crank scraper offer maximum oil control. Part No.
Description
CLN11014 .........SB Chevy Dart/Rocket Block Oil Pan CLN20322 .........Oil Pump Pickup For MEL10555
Levi Jones
72
SB Chevy Oil Pan CLN12213LM NEW! Aluminum oil pan has three pickup fittings on the right side and CNCmachined billet end caps for ultimate sealing. A built-in, full length crankshaft scraper and windage tray effectively control oil. Engineered for chassis without a crossmember under the engine.
Photos: Courtesy TSR
2010
065-080OW10.indd 72
11/12/09 11:34:49 AM
SB Chevy SHP Engine Blocks NEW!
SB Chevy Iron Eagle Engine Block
All new “SHP” (Special High Performance) cast iron blocks are affordable, durable and precisely machined. Capable of handling up to 600 horsepower, heavy duty blocks have 5/8" thick decks, .230" minimum wall thickness cylinder walls, stock 9.025" deck height, ductile iron main caps and full compatiblity with most standard OEM components. Offered in 4.000" or 4.125" cylinder bore versions.
Affordable iron block has many advantages over production small block Chevy. The cam location has been raised and the oil pan rails are spread to accommodate a stroker crank. Available in standard (9.025") or tall deck (9.325") versions with 350 or 400 main sizing. Finish machined to exact tolerances, saving the expense of blueprinting.
Part No.
Description Deck Ht.
DRT31161111 SB Chevy DRT31161211 SB Chevy
9.025" 9.025"
SB Chevy “Little M” Cast Iron Engine Block
Shipped Via Truck Freight
Cyl. Bore
Main Dia.
Main Caps
4.000" 4.125"
2.450" 2.450"
Ductile Iron Ductile Iron
Shipped Via Truck Freight
Part No.
Description
Deck Ht.
Cyl. Bore
Main Dia.
DRT31121211 Iron Eagle 9.025" DRT31122211 Iron Eagle 9.025" DRT31122221 Iron Eagle 9.325" DRT31122222* Iron Eagle 9.325" *Includes BB Chevy cam bearing sizing.
Description
4.125" 4.125" 4.125" 4.125"
2.45" 2.65" 2.65" 2.65" Shipped Via Truck Freight
SB Chevy Race Series Aluminum Engine Block
An affordable alternative to searching for used small block Chevy four-bolt blocks. Block is an ideal base for sound, powerful engine and is compatible with standard components. Block has billet steel or ductile iron four-bolt main caps, extra thick cylinder walls, standard cam location, extra thick decks, and 350 or 400 main sizing. DRT31131111 “Little M” DRT31131211 “Little M” DRT31132211 “Little M” DRT31151111 “Little M Sportsman” DRT31151211 “Little M Sportsman” DRT31152211 “Little M Sportsman”
Part No.
Shipped Via Truck Freight
Deck Ht.
Cyl. Bore Main Dia. Main Caps
9.025" 9.025" 9.025" 9.025" 9.025" 9.025"
4.000" 4.125" 4.125" 4.000" 4.125" 4.125"
2.45" 2.45" 2.65" 2.45" 2.45" 2.65"
Steel Steel Steel Ductile Ductile Ductile
Light, strong and affordable 355-T6 alloy block has siamesed cylinders, scalloped water jackets, spread oil pan rails, steel four-bolt main caps, a two-piece rear main seal and choice of big block Chevy or 50mm cam bearing sizing. Block has 4.125" cylinder bores, 9.025" deck height and choice of 350 or 400 main bearing sizing. The camshaft centerline is raised for stroker crankshaft clearance. Block weighs just 95 lbs. Part No.
Description
Deck Ht.
Cyl. Bore
Main Dia.
Cam
DRT31111212 DRT31112212
Race Series Race Series
9.025" 9.025"
4.125" 4.125"
2.45" 2.65"
50mm BBC
Camshaft Bearings Standard, performance coated and roller cam bearings are for use with Dart engine blocks. Part No.
Description
DRT32210010 .......... SB Chevy "Iron Eagle", 2.120" O.D., Set DRT32210020 .......... SB Chevy "Little M", Set DRT32210023 .......... SB Chevy, Set DRT32220042 .......... Roller Cam Bearing, 55mm, Each DRT32510000 .......... SB Chevy/SB Ford Rear Cam Plug, 2.390" O.D., Each
NEW VENDOR NEW VENDOR
Iridium Power Spark Plugs The most efficient, durable and longest life spark plugs available. The smallest (0.4mm) center electrode in the industry and patented U-groove ground electrode produce a precise flame front. The patented iridium alloy can withstand temperatures in excess of 4,000°F, and is six times harder and eight times stronger than platinum.
SB Chevy Forged Connecting Rods Premium quality connecting rods are manufactured from 300M aircraft quality steel. Rods are bushed and are fitted with ARP fasteners. Choose from "L" (Light) and "UL" (Ultra Light) series. Sold in sets of eight Part No.
Description
UL (Ultra Light) Series DYR5850ULSBCLJARP7 5.850" Rods DYR6000ULSBCLJARP7 6.000" Rods L (Light) Series DYR6000LSBCLJARP7 6.000" Rods DYR6000LSBCSJARP7 6.000" Rods DYR6125LSBCSJARP7 6.125" Rods DYR6125ULSBCLJARP 6.125" Rods
Journal
Pin
Beam
Bolt
Weight
2.125" 2.125"
.927" .927"
Std. Std.
7/16" 615 grams 7/16" 620 grams
2125" 2.015" 2.015" 2.125"
.927" .927" .927" .927"
Std. Std. Std. Std.
7/16" 7/16" 7/16" 7/16"
665 grams 625 grams 630 grams 625 grams
For More Info, See Spark Plug Cross Reference Chart On Page 229
2010
065-080OW10.indd 73
73
11/12/09 12:03:11 PM
Titanium Valves NEW!
Super 7° Titanium “Shoulder” Valve Locks
Light, strong and reliable, Del West valves are manufactured using military spec. titanium for or weight savings of approximately 40% over steel alloys. oys. With lower mass, Del West valves may be used with ith more radical camshaft profiles without valve float and unnecessary wear on related valvetrain components. nen ents. t Radius style lock grooves reduce valve stem and tip stress, and require radius style valve locks. Sold in sets of eight.
Lightweight locks are machined from high quality titanium. Sets of 16. Part No.
Stem Diameter
Installed Height
Style
DWU790-C-16 DWU791-C-16 DWU792-C-16 DWU793-C-16 DWU794-C-16
11/32" 11/32" 5/16" 5/16" 5/16"
Standard +.050" -.050" Standard +.050"
Radius Radius Radius Radius Radius
11/32" Titanium Valves Part No.
Super 7° Titanium “Non-Shoulder” Valve Locks Lightweight, non-shoulder type 7° titanium locks are among the finest and most reliable. 100% CNC-machined locks will save 3-4 grams and assure a superior valve stem fit. Sold in sets of 16 pair. Part No.
Stem Diameter
Installed Height
Style
DWU689-C-16 DWU690-C-16 DWU691-C-16 DWU693-C-16
11/32" 11/32" 11/32" 5/16"
-.050" Standard +.050" Standard
Radius Radius Radius Radius
Super 7° Standard And “LTW” Titanium Retainers Retainers are CNC-machined from billet titanium, heat treated for maximum strength and offered in standard or “LTW” lightweight designs. “LTW” retainers have a compound radius, created by removing material from the inner body, to minimize weight without compromising strength. Sold in sets of 16. Part No.
Description
Valve Spring
A
DWU510-16 DWU510-LTW-16 DWU515-16 DWU515-LTW-16 DWU525-16 DWU526-LTW-16 DWU529D-LTW-16 DWU530B-16 DWU530B-LTW-16 DWU540-LTW-16 DWU550B-16 DWU550B-LTW-16
Std. Retainers “LTW” Retainers Std. Retainers “LTW” Retainers Std. Retainers “LTW” Retainers “LTW” Retainers Std. Retainers “LTW” Retainers “LTW” Retainers Std. Retainers “LTW” Retainers
Double Double Double Double Double Double Double Double Double Double Double Double
1.500" 1.450" 1.500" 1.450" 1.500" 1.350" 1.450" 1.495" 1.450" 1.375" 1.500" 1.450"
Kyle Cummins
74
Type
Head Dia.
Overall Length
Exhaust Exhaust Exhaust Exhaust Exhaust Exhaust Exhaust Exhaust Exhaust Exhaust Intake Intake Intake Intake Intake Intake Intake Intake
1.600" 1.600" 1.600" 1.600" 1.600" 1.625" 1.625" 1.625" 1.625" 1.625" 2.055" 2.080" 2.080" 2.100" 2.125" 2.150" 2.150" 2.180"
5.140" 5.240" 5.540" 5.540" 5.640" 5.440" 5.540" 5.540" 5.640" 5.740" 5.040" 5.040" 5.140" 5.140" 5.540" 5.440" 5.540" 5.540"
Description
DWUE1600-2TR-8 +.200" Long DWUE1600-3TR-8 +.300" Long DWUE1600-6TR-8 +.600" Long DWUE1600-6T25R-8 +.600" Long/25° Seat DWUE1600-7TR-8 +.700" Long DWUE1625-5TR-8 +.500" Long DWUE1625-6TR-8 +.600" Long DWUE1625-6T25R-8 +.600" Long/25° Seat DWUE1625-7TR-8 +.700" Long DWUE1625-8T25R-8 +.800" Long/25° Seat DWUI2055-1TR-8 +.100" Long DWUI2080-1TR-8 +.100" Long DWUI2080-2TR-8 +.200" Long DWUI2100-2TR-8 +.200" Long DWUI2125-6TR-8 +.600" Long DWUI2150-5TR-8 +.500" Long DWUI2150-6TR-8 +.600" Long DWUI2180-6TR-8 +.600" Long
Lash Caps Dimensions B C
1.155" 1.120" 1.140" 1.140" 1.130" 1.065" 1.155" 1.153" 1.155" 1.085" 1.185" 1.185"
.760" .730" .745" .745" .810" .775" .765" .835" .835" .795" .780" .780"
Hardened lash caps are CNC-machined to fit diameter of Del West titanium valves. Sold in sets of 16. D
– – – – – – – – – – – –
Photo: Jim DenHamer
Part No.
Description
DWULASHCAP-3412-16.....11/32" Lash Caps DWULASHCAP-2754-16.....7mm Lash Caps Note: Do not use lash caps on valves with a hardened steel tip insert.
Dave Steele
Photos: Jim DenHamer
2010
065-080OW10.indd 74
11/10/09 9:16:30 AM
NEW VENDOR
Forged Pistons Pistons are forged from high strength 2618 or 4032 alloys, and are fully CNC-machined to deliver superior fit, finish and sizing. Sold in sets of eight, complete with premium 8620 steel wrist pins and roundwire type locks. Diamond also offers custom pistons, available by special order. Please ask one of our sales persons for a custom piston order form, if desired. Part No.
Bore
Stroke
Comp. Height
Rod
Comp. Ratio
Top Ring
2nd Ring
Oil Ring
Small Block Chevy ProLite Flat Top Piston Sets (Fits Most 23° Cyl. Heads) DIA11040-8* 4.030" 3.480" 5.700" 1.550" 9.5:1 .043" .043" 3mm DIA11042-8* 4.040" 3.480" 5.700" 1.550" 9.6:1 .043" .043" 3mm DIA11052-8* 4.030" 3.480" 6.000" 1.250" 9.5:1 .043" .043" 3mm Small Block Chevy Standard Series Flat Top Piston Sets (Fits Most 23° Cyl. Heads) DIA11101-8† 4.030" 3.480" 5.700" 1.550" 9.3:1 1/16" 1/16" 3/16" DIA11121-8† 4.030" 3.750" 5.700" 1.425" 10.2:1 1/16" 1/16" 3/16" DIA11131-8† 4.030" 3.480" 6.000" 1.250" 9.3:1 1/16" 1/16" 3/16" DIA11151-8†‡ 4.030" 3.750" 6.000" 1.125" 10.2:1 1/16" 1/16" 3/16" DIA11191-8†‡ 4.125" 3.750" 6.000" 1.125" 10.7:1 1/16" 1/16" 3/16" DIA11192-8†‡ 4.155" 3.750" 6.000" 1.125" 10.8:1 1/16" 1/16" 3/16" Small Block Chevy Standard Series Dome Piston Sets (Fits Most 23° Cyl. Heads) DIA11651-8† 4.030" 3.480" 5.700" 1.550" 11.6:1 1/16" 1/16" 3/16" DIA11671-8† 4.030" 3.750" 5.700" 1.425" 11.9:1 1/16" 1/16" 3/16" DIA11686-8† 4.030" 3.480" 6.000" 1.250" 11.6:1 1/16" 1/16" 3/16" DIA11705-8†‡ 4.030" 3.750" 6.000" 1.125" 12.3:1 1/16" 1/16" 3/16" DIA11752-8† 4.155" 3.480" 6.000" 1.250" 12.3:1 1/16" 1/16" 3/16" DIA11765-8†‡ 4.125" 3.750" 6.000" 1.125" 12.4:1 1/16" 1/16" 3/16" DIA11767-8†‡ 4.155" 3.750" 6.000" 1.125" 12.5:1 1/16" 1/16" 3/16" DIA11777-8†‡ 4.155" 3.875" 6.000" 1.062" 12.9:1 1/16" 1/16" 3/16" DIA11782-8†‡ 4.155" 4.000" 6.000" 1.000" 13.3:1 1/16" 1/16" 3/16" * Signifies compression ratios based upon a 66cc combustion chamber. † Signifies compression ratios based upon a 70cc combustion chamber. ‡ Signifies pistons that include oil support rails.
NEW VENDOR
Cam Bearings American made bearings for new or used blocks have the surface characteristics of babbitt and will withstand high valve spring pressures. DURF-18 Use standard performance bearings with hydraulic or solid lifter cams or high performance bearings with roller cams. Most are available with fluoropolymer composite coating for oil retention and less friction; some are available in .010", .020", .030" and .040" oversizes. Specify sizing when ordering.
Application
Chevrolet SB Chevy, 1964-99 283-400 SB Chevy, 1955-63 265-327 SB Chevy “Bowtie” Block SB Chevy Brodix Alum. Block SB Chevy Dart “Little M” GM “Rocket” Block
Engine Hardware Finishing Kits Each kit includes dowel pins, cam bolts, seal housing components, woodruff keys, cam eccentrics. etc. Part No.
DURFKC-1
Description
DURFKC-1 .........SB Chevy 283-400 w/o Seal Housing DURFKC-1A .......SB Chevy 350-400 w/Seal Housing, Includes Roller Block
High Performance Coated
Standard Performance
High Performance
DURCH-8 DURCH-4 – DURCH-5-3 – –
DURCHP-8 DURCHP-8T DURCHP-4 – DURGMP-8 DURGMP-8T DURCHP-5-3 – – DURDT-1T DURGMP-1 DURGMP-1T
NEW VENDOR Tim Norman
Photo: Doug Swift
Shock Covers DOMDSC
Sprint Car Wind Deflector DOMDWD
High impact plastic covers help protect expensive shock absorbers from rocks and debris. Secures to shocks with wire ties.
Manufactured from high impact plastic, wind deflector installs at the rear of the hood, deflecting wind and debris up and over the driver.
2010
065-080OW10.indd 75
75
11/10/09 9:16:47 AM
Reactor Torsion Bars Front Axle DMISRC1910 Manufactured from 2-1/2" O.D. 4130 laser cut steel, lightweight Front Axle is heli-arc welded and powder coated chrome for durability. Fits Maxim or Eagle chassis.
Forged Aluminum Front Spindles Lightweight 2024-T3 Aluminum Spindles can be ordered with step, or a straight snout. Spindles are now forged for maximum strength and the snouts are Rockwell tested for proper hardness. Locknut kit included. Part No.
DMISRC2000
Description
DMISRC2150
Torsion stops are available made of aluminum, steel or super lightweight, durable 6AL-4V titanium. Part No.
Description
DMISRC2140 .....Aluminum Torsion Stop, 1-3/4" Split DMISRC2150 .....Aluminum Torsion Stop, 2" Split DMISRC2160 .....Steel Torsion Stop, 1-3/4" Split DMISRC2170 .....Steel Torsion Stop, 2" Split DMISRC2180 .....Titanium Torsion Stop, 1-3/4" Split
DMISRC2160
DMISRC2180
Torsion Bushings Part No.
Description
DMISRC2211 .....Bronze Torsion Bushing, For .120" Tubes DMISRC2220 .....Plastic Torsion Bushing, For .095" Tubes DMISRC2221 .....Plastic Torsion Bushing, For .120" Tubes
Steering Arms And Pitman Arms
King Pins And Related Components Description
Description
Torsion Stops
DMISRC1971 .....Black Widow Front Hubs, Use With DMISRC2000 Spindles DMISRC1972 .....Goldstar Front Hubs, Use With DMISRC2000 Spindles DMISRC1971 DMISRC1972X ...Goldstar Front Hubs With Angular Bearings, Use With DMISRC2000 Spindles DMISRC1973 .....Goldstar Front Hubs, Use With DMISRC2010 Spindles Replacement Components DMISRC1988 .....Replacement Hub Seal DMISRC1990 .....Bearing Kit With Seal And Race For DMISRC1972, 1 Side Only DMISRC1993 .....Front Rotor Bolt Kit DMISRC1997 .....King Pin Race Kit DMISRC1998 .....Spindle Nut Wrench DMISRC1997 DMISRC1999A ...Front Hub Lugnut, Each
DMISRC2003 .....King Pin Bearing And Race Kit DMISRC2040 .....Steel King Pin With Short Cap, .859" Dia. DMISRC2045 .....King Pin Cap, Short DMISRC2055 .....King Pin Cap, Long DMISRC2060 .....Titanium King Pin With Cap, .859" Dia.
Part No.
DMISRC2115 .....Aluminum Left Front Torsion Arm, “S” Bend DMISRC2120 .....Aluminum Front Torsion Arm, Long DMISRC2125 .....Aluminum Right Front Torsion Arm, 10° Broach DMISRC2130 .....Aluminum Front Torsion Arm, Short DMISRC2687 .....Lightweight Right Rear Torsion Arm, Eagle Or Maxim Chassis DMISRC2689 .....Lightweight Left Rear Torsion Arm, Eagle Or Maxim Chassis
Hubs are sold in pairs, with bearings, races, dust caps and hardware. Threaded dust caps tighten with DMIS RC1998 wrench to prevent loss or leakage.
Part No.
Description
DMISRC0950-30.....30" Long, .950" Rate DMISRC0975-30.....30" Long, .975" Rate DMISRC1000-30.....30" Long, 1.000" Rate DMISRC1015-30.....30" Long, 1.015" Rate DMISRC1025-30.....30" Long, 1.025" Rate DMISRC1050-30.....30" Long, 1.050" Rate
Made of 2024-T3 aluminum for maximum durability.
Forged Aluminum Front Hubs
Part No.
Part No.
Torsion Arms
Description
DMISRC2000 .....Spindle With Straight Steel Snout DMISRC2010 .....Spindle With Step Steel Snout DMISRC2020 .....Spindle With Straight Titanium Snout
Hollow torsion bars are true to within .001" and are the most consistent, with a smoother transition from effective length to bearing shoulder. Bars are CNC-machined from 4340 steel and then heat treated. All are 30" long and available in a variety of rates.
DMISRC2040
Made of quality 2024 aluminum. Part No. DMISRC2003
Brake Line Rock Guard DMISRC2820
Description
DMISRC2085 .....Combo Steering Arm, 5.5" x 1" Forward DMISRC2100 .....Single Steering Arm, Use With DMISRC2080 And DMISRC2085 DMISRC2240 .....Long Lightweight Pitman Arm DMISRC2260 .....Long Lightweight Pitman Arm, Angle Broached DMISRC2704
Brake Rotors
TECH TIP
Rotors are exceptionally lightweight, but will not compromise braking.
Torsion Bar Maintenance
DMISRC0811 .....Inboard Brake Rotor, Lightened, ..........................12" Dia., .810" Thick DMISRC2700 .....Front 3-Lug Brake Rotor, ..........................Aluminum Drilled, 10-1/8" Dia., DMISRC2701 .....Splined Adaptor For Three Pin RR Rotor, NEW! DMISRC0811 DMISRC2704 .....Front 3-Lug Brake Rotor, Steel Drilled, 10-1/4" Dia. DMISRC2705 .....Front 3-Lug Brake Rotor, Steel Drilled, 10-3/4" Dia. DMISRC2710 .....Front 3-Lug Brake Rotor, Alum. Drilled, 10-7/8" Dia. DMISRC2780 .....Splined Right Rear Brake Rotor, Alum. Drilled, 10-1/8" Dia. DMISRC2931 .....Inboard Brake Spacer NEW!
Torsion bars are an important component of any open wheel car. When purchasing a new torsion bar it should be engraved with the date of purchase and corner of the car where the bar will be used. Torsion bars should only be reinstalled on opposite corners of the car (Example: RF to LR or RR to LF). They should be greased every single week, particularly after a car wash. Red Line’s CV2 (RED80102) is recommended, a waterproof synthetic grease, which holds up extremely well. In transit, the car should be properly blocked to prevent the torsion bars from bouncing. They cannot be expected to last forever and many race teams replace them every year. These recommendations will promote maximum torsion bar life.
Part No.
Description
DMISRC2701
76
2010
065-080OW10.indd 76
11/10/09 9:17:08 AM
Caliper Brackets
Driveshafts
Left front Brackets include fasteners. Part No.
Description
DMISRC2800 ............ For 10-1/8" Dia. Rotor DMISRC2810 ............ For 10-7/8" Dia. Rotor
Manufactured from premium 4340 steel for maximum durability. Very true and strong. Part No.
Description
DMISRC2430 ............ 30" Driveshaft DMISRC2440 ............ 32" Driveshaft
DMISRC2930
Splined Inboard Rotor Mounts Jacobs Ladders
Billet aluminum Rotor Mounts. Part No.
Description
DMISRC2932
DMISRC2930 ............ One-Piece Floater Style DMISRC2932 ............ Clamp Style, Hard Anodized
Steel Jacobs Ladders, in two lengths, include straps. Part No.
Description
DMISRC2505 ............ Jacobs Ladder, 13-5/8" DMISRC2510 ............ Jacobs Ladder, 14"
Gladiator U-Joint Assemblies DMI’s Assemblies are among the strongest available, each use large Gladiator u-joint cross which never needs grease. Available with full aircraft quality 7075-T6 billet aluminum, steel with aluminum yoke or new titanium with aluminum yoke. Part No.
Birdcages DMISRC2575 Small, one-piece, 7075-T6 aluminum Birdcages have double bearings and don’t require bolt-on brackets or spacers. Sold in pairs. Include brackets for left or right side brakes. Replacement Components
Description
DMISRC2322 ............ Titanium/Aluminum U-Joint Assy., Chevy/Chrysler DMISRC2325 ............ Aluminum U-Joint Assy., Chevy/Chrysler DMISRC2336 ............ Gladiator U-Joint Cross Only DMISRC2345 ............ Steel/Aluminum U-Joint Assy., Chevy/Chrysler
Part No. DMISRC2322
Description
DMISRC2553 ............ 6014 Birdcage Bearing DMISRC2578 ............ 5914 Birdcage Bearing (32mm) DMISRC2579 ............ Birdcage Spiral Lock For 5914 Bearing DMISRC2581 ............ Birdcage Caliper Mount
Torque Ball Housings And Collars Spacer Kit And Axle Nuts DMI engineered the original ten-piece Spacer Kit. Part No.
Part No.
DMISRC2305 DMISRC2308 Description
Description
DMISRC2590A .......... Aluminum Spacer Kit, 10 Pcs. DMISRC2610 ............ Rear Aluminum Axle Nut, All Axles, RH Threads DMISRC2620 ............ Rear Aluminum Axle Nut, All Axles, LH Threads
DMISRC2310
DMISRC2305 ............ Steel Housing And Collar DMISRC2308 ............ New Style Housing And Collar With Insert DMISRC2310 ............ Magnesium Housing And Collar DMISRC2311 ............ Torque Ball Stud Kit
Rear Axle Nut Wrench DMISRC2607 Complete with lightweight axle adapter.
Torque Ball DMISRC2380 Aluminum Torque Ball is hardcoated and then Teflon coated for a “no bind” feel.
Aluminum Rear Splined Wheel Center
Torque Tubes 2024-T3 aluminum tubes are first hardcoated and then Teflon coated for a smooth, “no bind” feel. Magnesium bases are powder coated for corrosion resistance. Part No.
Description
DMISRC2393
DMISRC2396
DMIRRC2006 ............ Torque Tube Stud Kit DMISRC2393 ............ Torque Tube With Lightweight Magnesium Base, 28" DMISRC2394 ............ Torque Tube With Lightweight Magnesium Base, 32" DMISRC2396 ............ 3" (MPD/Winters Style) Torque Tube With Lightweight Magnesium Base, 28"
Forged aluminum rear wheel center will fit Weld or Sander wheels. Centers have a durable powder coated finish to protect against corrosion. Part No.
Description
DMISRC1979 ............ Goldstar DMISRC1979A .......... Black Widow
2010
065-080OW10.indd 77
77
11/10/09 9:17:43 AM
Motor Plates
Rear Ends
DMISRC2830 DMI’s Motor Plates, in aluminum or magnesium, have been machined to keep weight at a minimum. Fits Maxim and Eagle chassis. Part No.
Description
XR-2 NEW!
DMISRC2831
DMISRC2840
DMISRC2830 ............ Aluminum Front Motor Plate, Drilled For Dry Sump Tank Mounting DMISRC2831 ............ Aluminum Two-Piece Front Motor Plate, Lightened DMISRC2832A .......... Top Dry Sump Top Tank Mount DMISRC2840 ............ Aluminum Rear Motor Plate, Lightened DMISRC2860 ............ Magnesium Rear Motor Plate, Lightened
Wing Components
DMISRC2900
DMISRC2910
DMISRC2915
DMISRC2920 Part No.
Description
DMISRC2921, DMISRC2922
DMISRC2900 ............ 13" Straight Front Wing Post DMISRC2910 ............ 12-1/2" Bent Front Wing Post DMISRC2915 ............ 7-1/2" To 11-1/2" Front Wing Straps (Pair), Bolt Style DMISRC2920 ............ Wing Valve DMISRC2921 ............ 10" Wing Cylinder With Heim Joint DMISRC2922 ............ 12" Wing Cylinder With Heim Joint
StratoShifter Assembly DMISRC2400 Shifter keeps your car locked in gear and keeps the tension off all rear internals. Assembly includes cable, quick disconnect and hardware. Replacement Components Part No.
Description
DMISRC2405 ............ Shifter Cable DMISRC2406 ............ Quick Disconnect
The Bulldog XR-2 is the rear for the 21st century. The XR-2 saves 6 1/2 lbs. over the XR-1 while incorporating 95% of the same components. The XR-2 utilizes the same dependable ring and pinion as the XR-1. A mix of space age design and old fashioned common sense make Bulldog XR-2 the premier rear for sprint car racing.
Bulldog XR-1 Bulldog rear ends are designed with performance, reliability and strength as priorities. Each Bulldog rear has integral support ribs for housing reinforcement, a thick, durable snout, and “bat wing” pinion bearing support for increased strength and housing rigidity. Housings are complete assemblies, fitted with the highest quality ring and pinion sets, bearings and seals for maximum longevity. Offered in natural magnesium finish or black thermal coated which disperses heat. Part No.
Description
DMIRRC4000 ............ Bulldog Sprint Rear End, 4.86 Ring And Pinion DMIRRC6000 ............ Bulldog Sprint Rear End, 4.11 Ring And Pinion DMIRRC6000-1......... Bulldog Sprint Rear End, 4.11 Ring And Pinion, with Thermal Coat DMIRRC7000 ............ XR-2 Sprint Rear End, 4.86 Ring And Pinion DMIRRC9000 ............ XR-2 Sprint Rear End, 4.11 Ring And Pinion DMIRRC9000-1A ...... XR-2 Sprint Rear End, 4.11 Ring And Pinion, With Thermal Coat Replacement Components DMIRRC1034 ....................Breather Assembly DMIRRC1105 ....................Side Bell O-Ring DMIRRC1200 ....................Aluminum Live Axle, 2.0" ID With Spool DMIRRC1217 ....................Axle Seal DMIRRC1300 ....................4.12 Ring And Pinion With Bearings, No Posi Lock DMIRRC1300-02-05 .........4.12 Ring And Pinion With Bearings, .........................................EDM/REM, No Posi Lock DMIRRC1305 ....................4.86 Ring And Pinion .........................................With Bearings, No Posi Lock DMIRRC1305-02-05 .........4.86 Ring And Pinion With Bearings, .........................................EDM/REM, No Posi Lock DMIRRC1410 ....................10-10 Front Bearing DMIRRC1415 ....................Internal 10-10 Seal DMIRRC1430 ....................Internal 10-10 Lower Shaft DMIRRC2004 ....................Complete Swivel Coupler Assembly DMIRRC1300-02-05
Jam Nuts For 3/4 Wrench Part No.
Description
DMIJAM10................ 5/8 Steel RH DMIJAM10L .............. 5/8 Steel LH
DMIJAM10
DMIJAM10L
Plastic Shock Cover DMISRC2940 Snap-on shock cover protects shock from rocks and mud.
Scott Biertzer
78
Photo: John Berglund
2010
065-080OW10.indd 78
11/10/09 9:18:14 AM
XR-1 Rear End Component Parts
No. Description
1 2 3 4 5 6 7 8 9* 10* 11 12 13 14* 15
Center Section Side Bell Shim Kit, Axle Bearing Bearing Tapered Roller, Axle Race, Axle O’Ring, Side Bell O’Ring, Axle Seal Seal, Axle Spiralox, Side Bell Seal Internal Axle, Live (Including Spool And 1/2-20 X 1" BHCS) Plug Fitting, Breather 90° Push Lock Fitting, Breather Poly Tube, Breather Ring And Pinion (4:12, 4:86) Stud 7/16" Double End, Side Bell
Part No.
Qty.
No.
Description
DMIRRC-1005 DMIRRC-1100 DMIRRC-1229 DMIRRC-1210 DMIRRC-1215 DMIRRC-1105 DMIRRC-1220 DMIRRC-1217 DMIRRC-1225 DMIRRC-1205 DMIRRC-1035 DMIRRC-1040 DMIRRC-1045 DMIRRC-1300 DMIRRC-1110
1 1 1 2 2 2 2 2 2 1 1 1 1 1 9
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55
Qty.
2 2 1 1 2 1 1 1 1 1 12 12 1 1 1
DMIRRC-1440
1
DMIRRC-1430 DMIRRC-1420 DMIRRC-1415
1 1 1
16 7/16"-14 X 1-1/4" HHCS
DMIRRC-1109 1
56
17 7/16"-14 X 1" HHCS 18 7/16" SAE Flat Washer 19 7/16"-20 Nylon Locknut Magnesium Quick Change Gear Cover 20 (Without Bearings) 21 Gasket, Quick Change Cover (Teflon) 22 Ball Bearing, Quick Change Cover 23 3/8"-16 Aluminum High Nut, Quick Change Cover 24 3/8"-16 X 1" HHCS, Retainer Plate 25 Retainer Plate, Pinion 26 Retainer, Stub Shaft Bearing 27 Spacer, Pinion Bearing 28 Posi-Lock Retainer 29 O’Ring, Posi-Lock Retainer 30* Posi-Lock Nut 31 Washer Bearing, Pinion 32 Bearing Tapered Roller, Pinion 33 Race Double Bearing, Pinion 34 Roller Bearing, Pinion Nose Shaft 35 3/8"-16 X 2.0" Stud, Quick Change Cover 36 Bearing External, Stationary Coupler 37 Snap Ring OD, Stationary Coupler 38 Stationary Coupler (Female Splined)
DMIRRC-1109 1 DMIRRC-1130 11 DMIRRC-1120 11
57* 58 59
DMIRRC-1385 1
60
O’Ring, Lower Shaft
DMIRRC-1435
3
Internal Snap Ring, 10-10 Coupler Integral Coupler (10-10), Steel Bearing Ball, Snout External Snap Ring, Integral 10-10 Coupler Shifter Housing O’Ring, Shifter HousingΩ Shifter Shaft O’Ring, Shifter Shaft Snap Ring Shifter Shaft Arm, Shifter 3/8"-24 X 1/2" BHCS, Shifter Arm 3/8" SAE Washer, Shifter Arm 5/16"-18 X 1.0 12 Point Bolt, Shifter Housing 5/16 An Washer, Shifter Housing Bolt Locking Tab, 2 Bolt Bracket, Shifter Cable Mounting Spacer, Shifter Cable Mounting Bracket 3/8"-16 X1.0" BHCS, Cable Mounting Bracket
DMIRRC-1425 DMIRRC-1400 DMIRRC-1410 DMIRRC-1405 DMIRRC-1700 DMIRRC-1705 DMIRRC-1710 DMIRRC-1715 DMIRRC-1720 DMIRRC-1725 DMIRRC-1730 DMIRRC-1735 DMIRRC-1740 DMIRRC-1745 DMIRRC-1330 DMIRRC-1050 DMIRRC-1055 DMIRRC-1060
1 1 1 1 1 1 2 1 1 1 1 4 4 3 1 2 2
DMIRRC-1212
4
DMIRRC-1340 1 61 DMIRRC-1350 2 62 DMIRRC-1360 6 63 DMIRRC-1335 6 64 DMIRRC-1320 1 65 DMIRRC-1325 1 66 DMIRRC-1315 1 67 DMIRRC-1366 1 68 DMIRRC-1367 1 69 DMIRRC-1369 1 70 DMIRRC-1368 1 71 DMIRRC-1311 2 72 DMIRRC-1312 1 73 DMIRRC-1310 1 74 DMIRRC-1355 6 75 DMIRRC-1505 1 76** DMIRRC-1515 1 77** DMIRRC-1500 1 78** DMIRRC-1510 39 Bearing Small Internal, Stationary Coupler 80, 81 1 40 Sliding Coupler (Male Splined) DMIRRC-1600 1 82 *Part Numbers may vary due to options **Part Numbers make up kit RRC-1049
Quick Change Gears (Not Included With A Rear) 1/2"-20 X 1 BHCS, Spool To Axle
2010
065-080OW10.indd 79
Part No.
DMIRRC-1520 DMIRRC-1620 DMIRRC-1625 DMIRRC-1615 DMIRRC-1610 DMIRRC-1605 DMIRRC-1150 DMIRRC-1145 DMIRRC-1140 DMIRRC-1135 DMIRRC-1301 DMIRRC-1302 DMIRRC-1030 DMIRRC-1010 DMIRRC-1020
Snap Ring Internal, Rear Bearing Snap Ring External, Stub Shaft Ball Bearing Shielded, Stub Shaft Shaft Stub 1/4" Steel Ball, Detent Spring Detent 1/2"-13 Aluminum Jam Nut 1/2" SAE Flat Washer 1/2"-13 Adjusting Screw, Ring Gear Back Stop Back Stop, Ring Gear 3/8"-24 Ring Gear Bolt (Threaded Ring Gear) Washer 3/8" Belleville (Threaded Ring Gear) 3/8" Pipe Plug Large Inspection Plug With O’Ring Small Inspection Plug With O’Ring Snap Ring External, Lower Shaft For 10-10 Coupler Lower Shaft, Standard (Steel) Spacer, Front Bearing Seal, Integral Coupler (Snout)
79
11/10/09 9:18:51 AM
NEW VENDOR
Engine Enamel And High Heat Paints Advanced formulas include ceramic resins for increased heat dissipation and gloss retention. Resins also offer protection from excessive heat and automotive fluids. Engine enamels resist temperatures up to 500° F., while High Heat paints resist temperatures up to 1,200° F. Sold in 12 oz. aerosol cans. Part No.
Description
High Heat Enamels SHEDH1602 .............. Black SHEDH1604 .............. White SHEDH1606 .............. Aluminum SHEDH1608 .............. Red SHEDH1610 .............. Orange SHEDH1612 .............. Blue SHEDH1614 .............. Gray Primer
Part No.
Description
Engine Enamels SHEDE1601 .............. Ford Blue SHEDE1606 .............. Ford Dark Blue SHEDE1607 .............. Chevrolet Orange/Red SHEDE1608 .............. GM Blue SHEDE1609 .............. Chevrolet Blue SHEDE1611 .............. New Ford Gray SHEDE1613 .............. Gloss Black SHEDE1615 .............. Aluminum SHEDE1620 .............. Chevrolet Orange SHEDE1634 .............. GM/Chrysler Low Gloss Black SHEDE1635 .............. Ford Semi-Gloss Black SHEDE1650 .............. Cast Coat Aluminum SHEDE1651 .............. Cast Coat Iron
SHEDE1606
SHEDE1615
SHEDE1651
SHEDH1604
SHEDH1608
SHEDH1614
3-D H-Beam Connecting Rods Durable and affordable 3-D forged rods are sized and finished in the U.S.A. and fitted with ARP 7/16", 190,000 PSI cap screw bolts. Many are available with premium ARP L-19, 265,000 PSI fasteners (add the suffix "L19" to the part number). All rods have alignment sleeves to positively locate the rod cap, assuring big end bore size and eliminating cap walk. Rods are bushed for use with full floating pins. Sold in weight matched sets. Part No.
Description
Center-to-Center Length
Gram Wt.
SB Chevy EAGCRS5700B3D EAGCRS5700S3D EAGCRS5850B3D EAGCRS5850S3D EAGCRS6000B3D EAGCRS6000B3D2000 EAGCRS6000S3D EAGCRS6000BLW* EAGCRS6000HJ† EAGCRS6000SLW* EAGCRS6000B3DL19 EAGCRS6000BST EAGCRS6000BSTL19 EAGCRS6125B3DL19 EAGCRS6125B3D EAGCRS6200B3D EAGCRS6250B3D
Lg. Journal 327, 350 Sm. Journal 283, 327 Lg. Journal, +.150" Sm. Journal, +.150" Lg. Journal, +.300" Lg. Journal/Extreme Duty Sm. Journal, +.300" Lg. Journal, +.300", Lt. Wt. +.300", Lt. Wt. Sm. Journal, +.300" Lg. Journal +.300", L19 Lg. Journal, Max Stroke Lg. Journal, Max Stroke Lg. Journal +.425", L19 Lg. Journal, +.425" Lg. Journal, +.500" Lg. Journal, +.550"
5.700" 5.700" 5.850" 5.850" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.125" 6.125" 6.200" 6.250"
630 670 650 675 640 645 680 545 575 550 645 645 650 660 660 650 665
Crank Pin Dia. Big End Width Pin End Bore
2.100" 2.000" 2.100" 2.000" 2.100" 2.100" 2.000" 2.100" 1.889" 2.000" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100"
.940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940"
.927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927"
*Featherweight rods are for applications with UNDER 500 horsepower only. † SB Chevy Featherweight rods with Honda rod sizing.
EAGCRS5700B3D
Forged 4340 Steel Crankshafts Unsurpassed quality and exceptional strength at an affordable price. Non-twist, 4340 forgings are ground, cross-drilled, stress-relieved, shot-peened, micro-polished and nitrided. Rod journals are indexed for correct stroke. Finally, the crank is x-rayed, magnafluxed, sonic tested and inspected. Choose from standard and lightweight versions. Part No.
Description
Stroke
Rod Length
SB Chevy 350 (Early 2-Pc. Rear Main Seal) EAG435034805700 Internal Balance 3.480" 5.700" EAG4350348057LA Internal Balance - Ltwt. 3.480" 5.700" EAG435035005700 Internal Balance 3.500" 5.700" EAG435035625700 Internal Balance 3.562" 5.700" EAG435037505700 Internal Balance 3.750" 5.700" EAG435036255700 Internal Balance 3.625" 5.700" EAG4350375057LA Internal Balance - Ltwt. 3.750" 5.700" EAG435040006000 Internal Balance 4.000" 6.000" SB Chevy 350 (Ultra Lightweight - Honda Rod Journals) EAG4348348057FW Internal Balance 3.480" 5.700/6.000" EAG4348350057FW Internal Balance 3.500" 5.700/6.000" SB Chevy 400 (400 Main Sizing, No Spacer Bearings Required) EAG440034805700 Internal Balance 3.480" 5.700" EAG440037505700 Internal Balance 3.750" 5.700" EAG440038756000 Internal Balance 3.875" 6.000" EAG440040006000 Internal Balance 4.000" 6.000"
80
Rod Journal
2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 1.890" 1.890" 2.100" 2.100" 2.100" 2.100"
Silicon Bronze Wrist Pin Bushings NEW! Part No.
Applications
I.D.
O.D.
Length
EAGB927 EAGB928
SB Chevy, Ford SB Chevy, Ford
.864" .900"
.972" .972"
1.050" 1.012"
2010
065-080OW10.indd 80
11/10/09 9:18:54 AM
Perform-O-Flex Hose Earl’s Perform-O-Flex Stainless Steel Braided Hose has been the choice of top racing teams since 1972. Perform-O-Flex can be used with Swivel Seal, Auto-Fit or Auto-Mate hose ends and consists of an inner liner of Temprel synthetic rubber and a partially protective sheath of stainless steel braid embedded during manufacture. Temprel maintains flexibility and strength at temperatures between -40° and 300°F. The reinforced hose liner is then bonded to a full coverage outer sheath of high tensile stainless steel wire braid. Hose Size
I.D.
Max. Oper. Max. Clamp Pressure Pressure
O.D.
-4 7/32" 7/16" -6 11/32" 35/64" -8 7/16" 41/64" -10 9/16" 51/64" -12 11/16" 15/16" -16 7/8" 1-5/32" -20 1-1/8" 1-7/16"
1500 1500 1500 1250 1000 750 500
Min. Bend Radius
3 Ft. Part No.
6 Ft. Part No.
10 Ft. Part No.
20 Ft. Part No.
2" 2.5" 3.5" 4" 4.5" 5.5" 8"
EAR403004 EAR403006 EAR403008 EAR403010 EAR403012 EAR403016 EAR403020
EAR406004 EAR406006 EAR406008 EAR406010 EAR406012 EAR406016 EAR406020
EAR410004 EAR410006 EAR410008 EAR410010 EAR410012 EAR410016 –
EAR420004 EAR420006 EAR420008 EAR420010 EAR420012 EAR420016 –
250 250 250 250 250 250 250
Pro-Lite 350 Hose Pro-Lite 350 Racing Hose is designed for use with Earl’s Swivel-Seal or Auto-Crimp hose ends. Hose is ultra lightweight, yet delivers superior durability and resistance to high temperatures. Provides savings up to 30 lbs. when replacing the braided steel oil, fuel and coolant hoses on a race car using a dry sump type engine. Manufactured with an abrasion resistant nylon sheathing, bonded to the textile inner braid embedded in the synthetic rubber liner. Hose Size
I.D.
O.D.
Max. Oper. Pressure
Burst Pressure
Min. Bend Radius
3 Ft. Part No.
6 Ft. Part No.
10 Ft. Part No.
20 Ft. Part No.
-4 -6 -8 -10 -12 -16
.22" .35" .44" .57" .69" .88"
.44" .55" .65" .80" .94" 1.16"
350 350 350 350 350 300
1400 1400 1400 1400 1400 1200
2.00" 2.25" 3.50" 4.00" 4.50" 5.50"
EAR350304 EAR350306 EAR350308 EAR350310 EAR350312 EAR350316
EAR350604 EAR350606 EAR350608 EAR350610 EAR350612 EAR350616
EAR351004 EAR351006 EAR351008 EAR351010 EAR351012 EAR351016
EAR352004 EAR352006 EAR352008 EAR352010 EAR352012 EAR352016
Ano-Tuff Swivel-Seal Hose Ends Ano-Tuff Hose Ends are made from hard anodized aluminum offer exceptional resistance to wear and corrosion. Hose ends have a bright, black anodized finish and are compatible with Perform-O-Flex, Auto-Flex and Pro-Lite 350 hose. Hose Size
Straight
45° Low Profile
45° Tube
90° Low Profile
90° Tube
120° Tube
180° Tube
-6 -8 -10 -12 -16
EARAT800106 EARAT800108 EARAT800110 EARAT800112 EARAT800116
EARAT804506 EARAT804508 EARAT804510 EARAT804512 –
EARAT804606 EARAT804608 EARAT804610 EARAT804612 EARAT804616
EARAT809006 EARAT809008 EARAT809010 EARAT809012 EARAT809016
EARAT809106 EARAT809108 EARAT809110 EARAT809112 EARAT809116
EARAT812006 EARAT812008 EARAT812010 EARAT812012 –
EAR818006 EAR818008 EAR818010 EAR818012 –
90° Swivel Low Profile
45° Swivel Tube
Swivel-Seal™ Aluminum Hose Ends Swivel-Seal Hose Ends may be used with Perform-O-Flex, Pro-Lite 350, Auto-Flex or Ruff-Stuff stainless braided hoses. The Swivel-Seal has a cutter style end, used for over 40 years in the aerospace industry, and 20 years in automotive competition. During assembly of cutter style fittings, the end cuts into the hose, creating a tight, leakproof seal. Hose Size
Straight
45° 90° Low Profile Low Profile
-6 -8 -10 -12 -16
EAR800106 EAR800108 EAR800110 EAR800112 EAR800116
EAR804506 EAR804508 EAR804510 EAR804512 EAR804516
30° Tube
45° Tube
60° Tube
90° Tube
120° Tube
EAR809006 EAR803106 EAR804606 EAR806106 EAR809106 EAR812006 EAR809008 EAR803108 EAR804608 EAR806108 EAR809108 EAR812008 EAR809010 – EAR804610 EAR806110 EAR809110 EAR812010 EAR809012 EAR803112 EAR804612 EAR806112 EAR809112 EAR812012 EAR809016 – EAR804616 – EAR809116 EAR812016
150° Tube
180° Tube
EAR815006 EAR815008 EAR815010 EAR815012 EAR815016
EAR818006 EAR818008 EAR818010 EAR818012 EAR818016
120° Swivel Tube
45° Swivel Low Profile
Swivel-Seal™ Male Threaded Hose Ends NEW!
Swivel-Seal Hose Ends thread directly into a female port without adapters. The coupler may be rotated independently of the hose end, allowing the coupler to be threaded into the port while the hose and hose end are held stationary. Male Thread Size
Use Hose Size
Straight Part No.
45° Part No.
90° Part No.
1/8" NPT 1/4" NPT 3/8" NPT 3/8" NPT 1/2" NPT 1/2" NPT 1/2" NPT 3/4" NPT
-6 -6 -6 -8 -8 -10 -12 -12
EAR820162 EAR820106 EAR820166 EAR820108 EAR820188 EAR820110 EAR820113 EAR820112
– EAR824506 EAR824566 EAR824508 EAR824588 EAR824510 EAR824513 EAR824512
EAR829062 EAR829006 EAR829066 EAR829008 EAR829088 EAR829010 EAR829013 EAR829012
45°
90°
2010
081-096OW10.indd 81
Straight
81
11/10/09 9:23:43 AM
Auto-Fit™ Aluminum Hose Ends
Super Stock Hose
Earl’s Auto-Fit Hose Ends with nipple ends have the reliability and appearance of SwivelSeal ends, but are easier to assemble, and less expensive. During assembly, the barbed nipple is pushed into the hose, securing hose between the nipple and socket, providing a tight, secure seal.
Earl’s Super Stock Hose is a blue, high quality synthetic rubber hose reinforced with an internal braided fabric sheath. For use with Earl’s Super Stock Hose Ends only. Super Stock Hose is rated at 250 PSI and 250°F and is an excellent replacement for original equipment applications. Should not be used with brake fluid. On applications where maximum temperature range is expected, compression of the Super Stock collar is required.
Size
Straight
45° Tube
90° Tube
-4 -6 -8 -10 -12 -16 - 20 - 24
EAR300104 EAR300106 EAR300108 EAR300110 EAR300112 EAR300116 EAR300120 EAR300124
EAR304604 EAR304606 EAR304608 EAR304610 EAR304612 EAR304616 EAR304620 EAR304624
EAR309104 EAR309106 EAR309108 EAR309110 EAR309112 EAR309116 EAR309120 –
120° Tube
150° Tube
180° Tube
EAR312004 EAR315004 – EAR312006 EAR315006 EAR318006 EAR312008 EAR315008 EAR318008 EAR312010 – – EAR312012 – – EAR312016 – EAR318016 – – – – – –
Hose Size
-6 -8 -10 -12
I.D.
O.D.
Max. Oper. Pressure
Min. Bend Radius
10 Ft. Length 20 Ft. Length Part No. Part No.
250 250 250 250
3" 5" 6" 7"
EAR791006 EAR792006 EAR791008 EAR792008 EAR791010 EAR792010 EAR791012 –
3/8" 5/8" 1/2" 3/4" 5/8" 15/16" 3/4" 1-1/32"
Auto-Mate Hose Ends
Super Stock Hose Ends
Auto-Mate Hose Ends are offered in traditional blue anodized or black Ano-Tuff hard anodized aluminum. Hose ends are compatible with Auto-Flex or Perform-O-Flex stainless steel braid protected hoses. Professional, reliable plumbing at an economical price. Requires auto crimp collars listed below.
Super Stock Hose Ends are an attractive, lightweight direct replacement for the brass push-lock type. Fittings are machined from aluminum alloy and anodized in red and blue, available in many configurations. Use Super Stock Hose Ends with Earl’s Super Stock Hose (not intended for use with stainless braid protected hoses). Hose ends are a favorite with professional racers and in limited production stock applications. End collars may be compressed.
Blue Anodized Part No.
Straight EAR700106 EAR700108 EAR700110 EAR700112 45° EAR704606 EAR704608 EAR704610 EAR704612 90° EAR709106 EAR709108 EAR709110 EAR709112
Ano-Tuff Part No.
Hose End
Adapter Hose Size Size
EARAT700106 EARAT700108 EARAT700110 EARAT700112
-6 -8 -10 -12
-6 -8 -10 -12
-6 -8 -10 -12
EARAT704606 EARAT704608 EARAT704610 EARAT704612
-6 -8 -10 -12
-6 -8 -10 -12
-6 -8 -10 -12
EARAT709106 EARAT709108 EARAT709110 EARAT709112
-6 -8 -10 -12
-6 -8 -10 -12
-6 -8 -10 -12
Auto Crimp Collars Required for use with the above Auto-Mate Hose Ends. Sold individually. Part No.
Hose End
Hose Size
EAR798043 EAR798063 EAR798083 EAR798103 EAR798123 EAR798163
-4 -6 -8 -10 -12 -16
-4 -6 -8 -10 -12 -16
Aluminum AN To AN Adapters Union Male Available in plain steel, blue anodized aluminum, and Ano-Tuff black hard anodized aluminum finishes. Steel Part No.
Aluminum Part No.
Ano-Tuff Part No.
Fitting Size
EAR961503 EAR961504 – – – – –
EAR981503 EAR981504 EAR981506 EAR981508 EAR981510 EAR981512 EAR981516
– – EARAT981506 EARAT981508 EARAT981510 EARAT981512 –
-3 -4 -6 -8 -10 -12 -16
82
Part No.
AN Fitting Size
Hose No.
Hose Size
-6 -8 -10 -12
-6 -8 -10 -12
3/8" 1/2" 5/8" 3/4"
-6 -8 -10 -12
-6 -8 -10 -12
3/8" 1/2" 5/8" 3/4"
-6 -8 -10 -12
-6 -8 -10 -12
3/8" 1/2" 5/8" 3/4"
Straight EAR700167 EAR700109 EAR700111 EAR700113 45° EAR704667 EAR704609 EAR704611 EAR704613 90° EAR709167 EAR709109 EAR709111 EAR709113
Cushioned Tubing Clamps NEW! Aluminum Clamps support and locate hoses, lines, etc. and may be attached to the supporting structure. Part No.
Tube or Hose I.D.
No. Per Pkg.
EAR171003 EAR171004 EAR171006 EAR171008 EAR171010 EAR171012
3/16" 1/4" 3/8" 1/2" 5/8" 3/4"
10 10 10 5 5 5
Union Reducer Part No.
EAR991902 EAR991906 EAR991907 EAR991912 EAR991914 EAR991915 EAR991918 EAR991919 EAR991920 EAR991922 EAR991923
Large Small Fitting Size Fitting Size
-4 -6 -6 -8 -10 -10 -12 -12 -12 -16 -16
-3 -4 -5 -6 -6 -8 -6 -8 -10 -10 -12
2010
081-096OW10.indd 82
11/10/09 9:23:55 AM
Aluminum AN To AN Adapters Flare Reducers Part No.
Female Male Fitting Size Fitting Size
EAR9892064 EAR9892084 EAR9892086 EAR9892104 EAR9892106 EAR9892108 EAR9892120 EAR9892126 EAR9892160 EAR9892162
-6 -8 -8 -10 -10 -10 -12 -12 -10 -16
-4 -4 -6 -4 -6 -8 -10 -6 -6 -12
-4 -6 -8 -10 -12 -12 -16
Fitting Size
Fitting Size
Part No.
Fitting Size
EAR983308 .......-8 EAR983310 .......-10 EAR983312 .......-12
Bulkhead Tee Part No.
Fitting Size
Part No.
EAR963403* ..... -3 EAR983403 ...... -3 EAR983404 ...... -4 *Steel Part
-3 -4 -6 -8 -8 -10 -12
Fitting Size
EAR983406 .......-6 EAR983408 .......-8 EAR983410 .......-10
Bulkhead Tee On Run Part No.
Fitting Size
EAR980403 .............. -3 EAR980404 .............. -4
Bulkhead Nut Fitting Size
EAR962403* ..... -3 EAR982403 ...... -3 EAR982404 ...... -4 EAR982406 ...... -6 *Steel Part
Part No.
Fitting Size
EAR982408 .......-8 EAR982410 .......-10 EAR982412 .......-12 EAR982416 .......-16
90° Elbow Part No.
Part No.
EAR983708 .......-8 EAR983710 .......-10 EAR983712 .......-12
EAR963303* ..... -3 EAR983303 ...... -3 EAR983304 ...... -4 EAR983306 ...... -6 *Steel Part
Tee Part No.
Fitting Size
EAR983703 ...... -3 EAR983704 ...... -4 EAR983706 ...... -6
Part No.
Female Male Fitting Size Fitting Size
EAR989443 EAR989464 EAR989486 EAR989404 EAR989409 EAR989410 EAR989411
Part No.
90° Bulkhead
AN Reducer, O-Ring Part No.
45° Bulkhead
Fitting Size
EAR982104 ...... -4 EAR982106 ...... -6
Part No.
Fitting Size
EAR982108 .......-8 EAR982110 .......-10
Part No.
EAR502403* EAR592403 EAR502404* EAR592404 EAR592406 EAR992408 EAR992410 EAR992412 EAR992416 *Steel part.
Quantity Per Pkg.
Fitting Size
2 2 2 2 2 1 1 1 1
-3 -3 -4 -4 -6 -8 -10 -12 -16
Port Adapters (O-Ring Seal)
Straight Female AN Swivel Coupling
Available in traditional blue anodized aluminum or Ano-Tuff, black hard anodized aluminum finishes. An O-ring is included.
Part No.
Standard Part No.
Ano-Tuff Part No.
AN Size
Port Thread
EAR985064 EAR985006 EAR985068 EAR985086 EAR985008 EAR985081 EAR985009 EAR985010 EAR985011 EAR985013 EAR985012
– EARAT985006 EARAT985068 EARAT985086 EARAT985008 EARAT985081 EARAT985009 EARAT985010 EARAT985011 EARAT985013 EARAT985012
-6 -6 -6 -8 -8 -8 -10 -10 -10 -12 -12
-4 -6 -8 -6 -8 -10 -8 -10 -12 -10 -12
Straight Bulkhead Part No.
Fitting Size
EAR963203* ..... -3 EAR963204* ..... -4 EAR983203 ...... -3 EAR983204 ...... -4 EAR983206 .....-6 *Steel Part
Part No.
Fitting Size
EAR983208 .......-8 EAR983210 .......-10 EAR983212 .......-12 EAR983216 .......-16
Fitting Size
EAR915103 .............. -3 EAR915104 .............. -4 EAR915106 .............. -6 EAR915186 .............. -8,-6 EAR915108 .............. -8 EAR915110 .............. -10 EAR915112 .............. -12 EAR915116 .............. -16 EAR915120 .............. -20
90° Female AN Swivel To Female AN Swivel Low Profile Part No.
Tube Part No.
Hose End Size
EAR934103 EAR934104 EAR934106 EAR934108 EAR934110 EAR934112 EAR934116
EAR935103 EAR935104 EAR935106 EAR935108 EAR935110 EAR935112 EAR935116
-3 -4 -6 -8 -10 -12 -16
2010
081-096OW10.indd 83
Low Profile
83
11/10/09 9:24:16 AM
Aluminum AN To AN Adapters AN Tee Female Swivel On Side
Tube Nut
Part No.
EAR561803* EAR581803 EAR581804 EAR561806* EAR581806 EAR981808 EAR981810 EAR981812 *Steel part.
Part No.
Fitting Size
EAR925103 .............. -3 EAR925104 .............. -4 EAR925106 .............. -6 EAR925108 .............. -8 EAR925110 .............. -10 EAR925112 .............. -12
AN Tee Female Swivel On Run Part No.
Fitting Size
Tube Size
2 2 2 2 2 1 1 1
-3 -3 -4 -6 -6 -8 -10 -12
3/16" 3/16" 1/4" 3/8" 3/8" 1/2" 5/8" 3/4"
Fitting Size
EAR926103 .............. -3 EAR926104 .............. -4 EAR926106 .............. -6 EAR926108 .............. -8 EAR926110 .............. -10 EAR926112 .............. -12
Tube Sleeve Part No.
AN Female Swivel To Male AN 90째 Part No.
45째 Part No.
Hose End Size
EAR921103 EAR921104 EAR921106 EAR921108 EAR921110 EAR921112
EAR924103 EAR924104 EAR924106 EAR924108 EAR924110 EAR924112
-3 -4 -6 -8 -10 -12
45째
Part No.
AN Thread
Male AN EAR997106 .......-6 EAR997108 .......-8 EAR997110 .......-10 Female AN EAR987106 .......-6 EAR987108 .......-8 EAR987110 .......-10 Female NPT Part No.
Part No.
Part No. AN Thread
EAR987112 ......... -12 EAR987116 ......... -16
EAR996701 .......1/8" EAR996702 .......1/4" EAR996703 .......3/8"
Part No.
Pipe Thread Size
EAR996704 ......... 1/2" EAR996706 ......... 3/4"
Steel Weld Fittings NEW! Part No.
Fitting Size
Tube Size
2 2 2 2 2 1 1 1
-3 -3 -4 -6 -6 -8 -10 -12
3/16" 3/16" 1/4" 3/8" 3/8" 1/2" 5/8" 3/4"
Caps And Plugs
EAR997112 ......... -12 EAR997116 ......... -16 EAR997120 ......... -20
Pipe Thread Size
EAR561903* EAR581903 EAR581904 EAR561906* EAR581906 EAR981908 EAR981910 EAR981912 *Steel part.
Quantity Per Pkg.
90째
Aluminum Weld Fittings
AN Cap EAR592903 EAR592904 EAR592906 EAR992908 EAR992910 EAR992912 EAR992916 AN Plug EAR580603 EAR580604 EAR580606 EAR980608 EAR980610 EAR980612 EAR980616
Quantity Per Pkg.
Fitting Size
2 2 2 1 1 1 1
-3 -4 -6 -8 -10 -12 -16
2 2 2 1 1 1 1
-3 -4 -6 -8 -10 -12 -16
AN Thread
EAR967104 .............. -4 EAR967106 .............. -6 EAR967108 .............. -8 EAR967110 .............. -10 EAR967112 .............. -12 EAR967116 .............. -16
Chris Gurley
84
Quantity Per Pkg.
Port Plug With O-Ring Part No.
Quantity Per Pkg.
Fitting Size
EAR581406 EAR981408 EAR981410 EAR981412 EAR981416
2 1 1 1 1
-6 -8 -10 -12 -16
Photo: Chuck Baldwin
2010
081-096OW10.indd 84
11/10/09 9:24:34 AM
Aluminum Pipe Thread To AN Adapters Available in standard blue anodized or Ano-Tuff, black hard anodized finish. Fitting Size NPT Size
-3 -4 -4 -6 -6 -6 -6 -8 -8 -8 -10 -10 -10 -12 -12 -16 -16 -20
1/8" 1/8" 1/4" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/8" 1/2" 3/4" 1/2" 3/4" 3/4" 1" 1-1/4"
Std. Straight Part No.
Ano-Tuff Straight Part No.
Std. 45° Elbow Part No.
Ano-Tuff 45° Elbow Part No.
Std. 90° Elbow Part No.
Ano-Tuff 90° Elbow Part No.
EAR981603 EAR981604 EAR981644 EAR981662 EAR981606 EAR981666 EAR981668 EAR981607 EAR981608 EAR981688 EAR981611 EAR981610 EAR981609 EAR981613 EAR981612 EAR981615 EAR981616 EAR981620
– EARAT981604 EARAT981644 EARAT981662 EARAT981606 EARAT981666 EARAT981668 – EARAT981608 EARAT981688 EARAT981611 EARAT981610 EARAT981609 EARAT981613 EARAT981612 – – –
EAR982303 EAR982304 EAR982344 EAR982362 EAR982306 EAR982366 EAR982368 EAR982307 EAR982308 EAR982388 EAR982311 EAR982310 EAR982309 EAR982313 EAR982312 – – –
– EARAT982304 – – EARAT982306 EARAT982366 – – EARAT982308 EARAT982388 – EARAT982310 – EARAT982313 EARAT982312 – – –
EAR982203 EAR982204 EAR982244 EAR982262 EAR982206 EAR982266 EAR982268 EAR982207 EAR982208 EAR982288 EAR982211 EAR982210 EAR982209 EAR982213 EAR982212 EAR982215 EAR982216 –
– EARAT982204 EARAT982244 – EARAT982206 EARAT982266 EARAT982268 – EARAT982208 EARAT982288 EARAT982211 EARAT982210 EARAT982209 EARAT982213 EARAT982212 – – –
Straight AN Swivel To Male NPT Part No.
Hose End Size
NPT Thread Size
EAR916103 EAR916104 EAR916144 EAR916162 EAR916106 EAR916166 EAR916107 EAR916108 EAR916188 EAR916110 EAR916111 EAR916113
-3 -4 -4 -6 -6 -6 -8 -8 -8 -10 -10 -12
1/8" 1/8" 1/4" 1/8" 1/4" 3/8" 1/4" 3/8" 1/2" 1/2" 3/8" 1/2"
90° Male AN To Male Swivel NPT Part No.
Hose End Size
NPT Thread Size
EAR922106 EAR922166 EAR922108 EAR922188 EAR922111 EAR922110 EAR922113
-6 -6 -8 -8 -10 -10 -12
1/4" 3/8" 3/8" 1/2" 3/8" 1/2" 1/2"
Tee Part No.
Hose End Size
NPT Size
Thread On Side EAR982503 -3 EAR982504 -4 EAR982506 -6 EAR982508 -8 EAR982510 -10 Thread On Run EAR982603 -3 EAR982604 -4 EAR982606 -6 EAR982608 -8 EAR982610 -10 EAR982612 -12
1/8" 1/8" 1/4" 3/8" 1/2" 1/8" 1/8" 1/4" 3/8" 1/2" 3/4"
Steel Pipe Thread To AN Adapters NEW! Part No.
Straight EAR961603 EAR961604 EAR961644 EAR961606 90° Elbow EAR962203 EAR962204
Hose End Size
NPT Size
-3 -4 -4 -6
1/8" 1/8" 1/4" 1/4"
-3 -4
1/8" 1/8"
90° Female AN To Male Swivel NPT Part No.
Hose End Size
NPT Thread Size
EAR923103 EAR923104 EAR923162 EAR923106 EAR923166 EAR923108 EAR923188 EAR923111 EAR923110 EAR923112
-3 -4 -6 -6 -6 -8 -8 -10 -10 -12
1/8" 1/8" 1/8" 1/4" 3/8" 3/8" 1/2" 3/8" 1/2" 3/4"
Steel Gauge Head Adapters NEW! Part No.
Description
EAR968603 .........-3AN Male Fitting To Female 1/8" NPT, 90° EAR968703 .........-3AN Male Fitting To Female 1/8" NPT, Straight EAR968604 .........-4AN Male Fitting To Female 1/8" NPT, 90° EAR968704 .........-4AN Male Fitting To Female 1/8" NPT, Straight
2010
081-096OW10.indd 85
85
11/10/09 9:24:58 AM
Aluminum Pipe Thread Adapters Reducer Pipe Bushing Part No.
Female Pipe Thread Size
Male Pipe Thread Size
EAR991201 EAR991202 EAR991203 EAR991206 EAR991204 EAR991205 EAR991207 EAR991208 EAR991210
1/8" 1/4" 1/8" 1/8" 3/8" 1/4" 1/2" 3/8" 3/4"
1/4" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4" 3/4" 1"
Pressure Gauge Adapters Part No.
Description
EAR100192 .......-6 Male To -6 Male, 1/8" NPT In Hex EAR100193 .......-6 Male To 1/4" NPT Male, 1/8" NPT Hex EAR100194 .......-6 Male To 3/8" NPT, 1/8" NPT In Hex EAR100196 .......-8 Male To -8 Male, 1/8" NPT In Hex EAR100197 .......-8 Male To 1/4" NPT, 1/8" NPT In Hex EAR100198 .......-8 Male To 3/8" NPT, 1/8" NPT In Hex EAR100199 .......-6 Male To -6 Female, 1/8" NPT In Hex EAR100200 .......-8 Male To -8 Female, 1/8" NPT In Hex EAR100201 .......-4 Male To -4 Female, 1/8" NPT In Hex
In-Line Filters Part No.
Female Coupling Part No.
Pipe Thread Size Part No.
EAR991001 .... 1/8" EAR991002 .... 1/4" EAR991003 .... 3/8"
Pipe Thread Size
EAR991004 ... 1/2" EAR991006 ... 3/4"
Male Nipple Part No.
Pipe Thread Size Part No.
EAR991101 .... 1/8" EAR991102 .... 1/4" EAR991103 .... 3/8"
Pipe Thread Size
EAR991104 ... 1/2"
Shut-Off Valves 350 PSI max valves are ideal for use as emergency fuel shut-off valves, anti-theft devices, or as drain valves.
Internal/External Pipe Thread NEW! 90° Part No.
Pipe Thread 45° Part No. Size
EAR991401 EAR991402 EAR991403
EAR991501 EAR991502 EAR991503
90° Elbow
1/8" 1/4" 3/8"
NEW!
Tee NEW! Internal pipe thread.
Outlet Size
Overall Length
Body Material
EAR230501 EAR230502 EAR230503 EAR230504 EAR230505
3/8" NPT Fem. 3/8" NPT Fem. 3/8" NPT Fem. 1/2" NPT Fem. 1/2" NPT Fem.
3/8" NPT Female -6AN Bulkhead. -8AN Bulkhead 1/2" NPT Fem. -10AN Bulkhead
1-3/4" 2-3/4" 2-3/4" 2-1/4" 2-3/4"
Chrome Plated Brass Red Anodized Alum. Red Anodized Alum. Chrome Plated Brass Red Anodized Alum.
Part No.
Pkg. Qty.
Fitting Size
I.D.
EAR177003 EAR177004 EAR177006 EAR177008 EAR177010
10 10 10 5 5
-3 -4 -6 -8 -10
3/8" 7/16" 9/16" 3/4" 7/8"
Pipe Thread Size
EAR991701 .......1/8" EAR991702 .......1/4" EAR991703 .......3/8"
O-Rings Buna N O-Rings are compatible with most fuels and lubricants up to 275°F, while Viton O-rings can handle 400°F temperatures, synthetic lubricants, oxygen-bearing fuels, additives and non-ether brake fluids.
NPT Plugs Internal wrenching. Part No.
Quantity Per Pkg.
Pipe Thread Size
EAR593201 EAR593202 EAR593203 EAR593204 EAR993205 EAR993206
2 2 2 2 1 1
1/16" 1/8" 1/4" 3/8" 1/2" 3/4"
NPT Hex Head Plug Part No.
Pipe Thread Size
EAR993301 .............. 1/8" EAR993302 .............. 1/4" EAR993303 .............. 3/8" EAR993304 .............. 1/2" EAR993306 .............. 3/4"
86
45°
Inlet Size
Required with straight threaded adapter fittings or ports without O-ring relief.
Pipe Thread Size
EAR991601 .......1/8" EAR991602 .......1/4" EAR991603 .......3/8"
Part No.
90°
Part No.
Crush Washers
Internal pipe thread. Part No.
Description
EAR230106 .......-6 Bronze Element Fuel Filter EAR230107 .......Replacement Bronze Element EAR230108 .......-8 Bronze Element Fuel Filter EAR230206 .......-6 Screen Type Fuel Filter EAR230208 .......-8 Screen Type Fuel Filter EAR230210 .......-10 Screen Type Fuel Filter EAR230306 .......-6 Screen Type Oil Filter EAR230308 .......-8 Screen Type Oil Filter EAR230310 .......-10 Screen Type Oil Filter
Viton Part No.
Buna N Part No.
Pkg. Qty.
Fitting Size
EAR176106 – EAR176110 EAR176112 –
EAR176006 EAR176008 EAR176010 EAR176012 EAR176016
10 10 5 5 5
-6 -8 -10 -12 -16
Stat-O-Seals Synthetic rubber O-ring is mechanically locked to the I.D. of an aluminum washer. Compresses when tightening, forcing the sealing surfaces around the bolt shank. Temperature range of -85°F to 450°F. Two per pack. Part No.
Inside Dia.
EAR178005 .............. 5/16" EAR178006 .............. 3/8" EAR178007 .............. 7/16" EAR178008 .............. 1/2"
Part No.
Inside Dia.
EAR178009 .............. 9/16" EAR178010 .............. 5/8" EAR178012 .............. 3/4" EAR178014 .............. 7/8"
2010
081-096OW10.indd 86
11/12/09 3:53:59 PM
Coil Springs Eibach uses the finest quality, chrome silicon steel wire to produce coil springs that are cold formed on CNC coilers, heat tempered, shot peened, pre-set, phosphate treated and red powder coated (unless noted) with a durable epoxy finish. All springs are imprinted with the part number, guaranteed to remain within 2% of their rate and height for the life of the spring. 2-1/2" I.D. Coil-Over Springs Rate
12" Tall
80 EIB1200-250-0080 90 EIB1200-250-0090 100 EIB1200-250-0100 110 EIB1200-250-0110 120 EIB1200-250-0120 125 EIB1200-250-0125 130 EIB1200-250-0130 140 EIB1200-250-0140 150 EIB1200-250-0150 165 EIB1200-250-0165 175 EIB1200-250-0175 185 EIB1200-250-0185 200 EIB1200-250-0200 225 EIB1200-250-0225 250 EIB1200-250-0250 275 EIB1200-250-0275 300 EIB1200-250-0300 325 EIB1200-250-0325 350 EIB1200-250-0350 375 EIB1200-250-0375 400 EIB1200-250-0400 425 EIB1200-250-0425 450 EIB1200-250-0450 475 EIB1200-250-0475 500 EIB1200-250-0500S* 550 EIB1200-250-0550S* 600 EIB1200-250-0600S* 650 EIB1200-250-0650S* 700 – 750 EIB1200-250-0750S* 800 EIB1200-250-0800 900 EIB1200-250-0900 1000 EIB1200-250-1000 *S-Silver
10" Tall
8" Tall
7" Tall
– – – – – – – – EIB1000-250-0150 – EIB1000-250-0175 – EIB1000-250-0200 EIB1000-250-0225 EIB1000-250-0250 EIB1000-250-0275 EIB1000-250-0300 EIB1000-250-0325 EIB1000-250-0350 EIB1000-250-0375 EIB1000-250-0400 EIB1000-250-0425 EIB1000-250-0450 – EIB1000-250-0500 EIB1000-250-0550 EIB1000-250-0600 EIB1000-250-0650 EIB1000-250-0700 – EIB1000-250-0800 – –
– – – – – – – – EIB0800-250-0150 – EIB0800-250-0175 – EIB0800-250-0200 EIB0800-250-0225 EIB0800-250-0250 EIB0800-250-0275 EIB0800-250-0300 EIB0800-250-0325 EIB0800-250-0350 EIB0800-250-0375 EIB0800-250-0400 EIB0800-250-0425 EIB0800-250-0450 EIB0800-250-0475 EIB0800-250-0500 EIB0800-250-0550 EIB0800-250-0600 – EIB0800-250-0700 EIB0800-250-0750 EIB0800-250-0800 – –
– – – – – – – – – – – – – – – EIB0700-250-0300 EIB0700-250-0325 EIB0700-250-0350 – EIB0700-250-0400 – EIB0700-250-0450 – EIB0700-250-0500 – – EIB0700-250-0650 – – – – –
12" Tall
10" Tall
8" Tall
7" Tall
Tender/Linear NEW! 2-1/2" I.D. Coil-Over Springs Often stacked on top of a linear spring to create two spring rates when fine tuning suspensions. Part No.
Rate
EIB0175-250-0150.......... 150 EIB0175-250-0200.......... 200 EIB0175-250-0250.......... 250
2-1/2" I.D. Helper Spring EIBHELPER250 NEW! Prevents main spring from becoming loose at full drop.
2-1/2" I.D. Spring Spacer EIBSPACER250 NEW! Used to couple Helper/Tender spring to main spring.
Engine Block Heater FSR120832 A safe, easy, inexpensive way to preheat your engine. Each kit includes a left and a right side and a pair of power cords. Replacement Component Part No.
Sprint Car Radiator Furnace brazed, 100% pressure tested aluminum sprint car radiators are double pass style and directly mount to the sprint car chassis or engine. Radiators have two -6AN and two -8AN fittings. Part No.
Description
FSR102424 .......Replacement Cord Only
Description
FSR1105-2 ........Sprint Car Radiator Engine Mounted NEW! FSR2020 ...........Sprint Car, Stand Up Rad, 22" x 20" FSR6291 ...........Sprint Car, Double Pass Chassis Mount
FSR6291
Mobile Bleeder Tank FSR122853 Tig-welded aluminum bleeder tank includes a pressure gauge, a built-in carrying handle and tray. Tank sets regular and diaphragm axle bleeders perfect every time.
The Light FLAFR1001 The Light from Flaming River uses 2 D-cell batteries to eliminate cumbersome battery leads. Convenient, single wire inductive pickup and brilliant Xenon bulb allow precise timing, even in direct sunlight. Lens area is surrounded by an impactabsorbing, flexible rubber guard.
2010
081-096OW10.indd 87
87
11/12/09 12:12:24 PM
FEL1803
PermaTorque Head Gaskets NEW!
Oil Pan Gaskets
Gaskets have a wire ring combustion seal inside the stainless steel armor for highly concentrated sealing. The wire ring squeezes the combustion seal between the head and the block three times greater than standard head gaskets. Gaskets are sold individually.
Part No.
Nom. Gasket Comp. Comp. Bore Thick. Volume
Application
SB Chevy 1955-97 262, 265, 267, 283, 302, 307, 327, 350, 400 Iron/Alum. Head Apps., FEL1003* 4.166" .041" Exc. Alum. Blocks, 4.155" Max. FEL1004* Iron/Alum. Head Apps. 4.190" .041" FEL1010* Alum. Head Apps. Only, 4.155" Max. Bore 4.166" .039" FEL1014 Iron/Alum. Head Apps. 4.200" .039" FEL1034* Iron/Alum. Head Apps. 4.200" .041" Iron/Alum. Head Apps., Extra Thick, FEL1036* 4.250" .051" Extra Large Bore Small Chamber Aluminum FEL1043* 4.080" .039" Race/Some Vortec Heads Only FEL1044 Iron/Alum. Head Apps., Extra Thick 4.200" .051" FEL1045† Iron/Alum. Head Apps., Severe Duty Apps. 4.180" .039" FEL1094* Iron/Alum. Head Apps., Exc. 400, Extra Thin 4.100" .015" *Gasket does not have steam holes for 400 street operation. † Requires a precision receiver groove machined in cylinder head.
9.1cc 9.2cc 8.9cc 9.0cc 9.3cc 11.9cc 8.2cc 11.2cc 9.0cc 3.2cc
Multi-Layer Steel (MLS) Head Gaskets withstand the greater combustion chamber pressures of high output engines. Full-hard stainless steel construction withstands “scrubbing” between the head and block. Strategically placed sealing beads eliminate leak paths, and an extra strong “stopper” layer provides exceptional primary combustion sealing. Selected gaskets listed may also be available in other bore sizes and thicknesses. All gaskets are sold individually. Application
Gasket Bore
Nom. Comp. Thick.
SB Chevy 1955-97 262, 265, 267, 283, 302, 307, 327, 350, 400 FEL1142 Iron/Alum. Head Apps. Inc. 400 4.100" .040" FEL1143 Iron/Alum. Head Apps. Inc. 400 4.165" .040" FEL1144 Iron/Alum. Head Apps. Inc. 400 4.200" .040" FEL1144-2 SB2 With Symmetrical Cooling 4.200" .041"
Comp. Volume
9.0cc 9.2cc 9.3cc 9.3cc
Valve Cover Gaskets Part No.
Application
Material
SB Chevy 1955-97 262, 265, 267, 283, 302, 307, 327, 350, 400 FEL1602 Most Cyl. Heads Fel-Coprene Rubber FEL1603 Most Cyl. Heads Blue Stripe Cork-Rubber Cork-Lam FEL1604 All Exc. 1955-56 Engines Cork-Rubber/Steel Core Silicone Molded 1959-86, FEL1628 Rubber/Steel Core Chevy 18°/Brodix -12 FEL1641 Splayed Valve GM Corporate Composite-Silicone/Steel Core FEL1644 Chevy 18°/Brodix -12 Composite-Silicone/Steel Core 1986-97 Cork-Lam FEL1648 Late Model Center Bolt Cork-Rubber/Steel Core Cork-Lam FEL1649 Chevy 18°/Brodix -12 Cork-Rubber/Steel Core Silicone Molded FEL1655-1 SB2, SB2.2 Mirror Port Rubber/Steel Core
Oval 24-Bolt Fuel Cell Gasket FEL2400 NEW! 88
Application
Material
Thk.
3/32" 3/32" 3/32" 3/32" 3/32" 3/32" 9/64" 9/64" 9/64" 9/64" 9/64"
Rear Main Seals Rear main seals in silicone, Teflon or fluoroelastomer. High vacuum seals are used with crankcase vacuum pumps. Part No.
FEL2900
Description
SB Chevy 1955-97 262, 265, 267, 283, 302, 307, 327, 350, 400 FEL2900 ............1959-85, 2-Pc. Silicone FEL2909 ............Special Large O.D. for “Rocket” Block or Align Honed 400, 2-Pc. Fluoroelast. FEL2912 ............1959-85, 2-Pc. Fluoroelastomer, High Vacuum
Intake Manifold Gaskets
PermaTorque MLS Head Gaskets
Part No.
Part No.
SB Chevy 1955-97 262, 265, 267, 283, 302, 307, 327, 350, 400 FEL1802 1957-74 Thin Front Seal, LH Dipstick FEL1803 1975-79 Thick Front Seal, LH Dipstick FEL1818 1980-85 Thick Front Seal, RH Dipstick FEL1821 Side Rails Trimmed For Strokers Thin/Thick Seals, LH Dipstick FEL1823 CNC Bow Tie Block Composite/Steel Core/Silicone FEL1839 “Rocket”/Dart Iron Eagle/GM Med. Deck Rubber-Coated Fiber/Steel Core FEL1880 1975-79, Side Rails Trimmed For Strokers Thick Front Seal, LH Dipstick FEL1881 1980-85, Side Rails Trimmed For Strokers Thick Front Seal, RH Dipstick FEL1882 Side Rails Trimmed For Strokers Thick Ft. Seal, Straight Side Rails FEL1885 1957-74 1-Piece With Rigid Carrier Thin Front Seal, LH Dipstick FEL1886 1986-97, Bowtie Short Deck Block Thick Front Seal, 1-Pc. Rear Seal
Fel-Pro intake manifold gaskets are available for a variety of engines and are sold in sets, however, many are also available in bulk (10 sets). Order bulk by adding a “B” to the end of the part number. Bulk gaskets are sold without end seals and distributor gaskets. Part No.
Application
Material Construction
Port Size
SB Chevy 1955-97 262, 265, 267, 283, 302, 307, 327, 350, 400 FEL1204 Stock w/ Blocked Heat Cross., Except 1982-85 EFI Embossed/Laminate 1.23" x 1.99" FEL1205 Stock Or Small Race Port Std. Printoseal 1.28" x 2.09" FEL1205S-3 Stock/Small Race Port Steel Core 1.28" x 2.09" FEL1206 Medium Race Port Std. Printoseal 1.31" x 2.21" FEL1206S-3 Medium Race Port Steel Core 1.31" x 2.21" FEL1207 Large Race Port Std. Printoseal 1.38" x 2.28" FEL1244 Trim To Fit (Largest Port Size Listed) Std. Printoseal 1.25" x 1.90" FEL1245 Trim To Fit (Largest Port Size Listed) Std. w/ Coating 1.25" x 1.90" FEL1254 Chevy 18° Split Valley Cover Gasket Std. w/ Coating N/A FEL1254-1 Chevy 18° Split Valley Cover Gasket Std. w/ Coating N/A FEL1263 Raised Runner Pontiac/Chevy “867” Head Std. w/ Coating 1.31" x 2.02" FEL1266 Medium Race Port Std. w/ Coating 1.31" x 2.21" FEL1267 Large Race Port Std. w/ Coating 1.38" x 2.28" FEL1286 Raised Runner Pontiac/Chevy “867” Head Std. w/ Coating 1.31" x 2.02" FEL1288 Chevy 18° High Port Std. Uncoated 1.25" x 2.15"
Thk.
.060" .060" .065" .060" .065" .060" .060" .120" .060" .030" .060" .120" .120" .120" .120"
Thk.
5/32" 7/32" 5/16" 1/4" 3/32" 3/32" 1/4" 1/4" 11/64"
Exhaust Header Gaskets Fel Pro’s exhaust header gaskets have a durable perforated steel core for exceptional sealing without blowouts. Part No.
Application
Small Block Chevy 1955-97 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 FEL1405 Square (Large Race) FEL1406 “D” Shape (Brodix Track 1) FEL1409 Round (Brodix Spread Port) 18° FEL1426 Round FEL1444 Square (Stock) FEL1445 Raised “D” Port (Brodix -12B/2000)
Port Size
1.55" x 1.55" 1.53" x 1.63" 1.81" Dia. 1.59" Dia. 1.38" x 1.38" 1.78" x 1.70"
Quick Change Gasket FEL2303 NEW! 1/32" steel core gasket fits most 10-bolt cover quick changes.
2010
081-096OW10.indd 88
11/10/09 9:26:09 AM
NEW VENDOR
Competition Plus Valves Aerospace alloys, including EV8-Z18, provide high tensile strength while a two step forging process maintains proper grain flow and correct material structure. Small block Chevy valves listed are heat treated and stress relieved. Each valve design undergoes flow bench testing to determine optimum flow and velocity. Sold in sets of eight. To order a single valve, replace the -8 with a -1. Part No.
Small Block Chevy FERF1100PQ-8 FERF1476P-8 FERF1102PQ-8 FERF1148PQ-8 FERF1187P-8 FERF1140PQ-8 FERF2212P-8 FERF1108P-8 FERF1128PQ-8 FERF1257P-8 FERF1115P-8 FERF1112P-8 FERF2252P-8 FERF1114P-8 FERF1147P-8 FERF1139P-8
Type
Head Size
Stem Dia.
Overall Length
Description
Exh. Exh. Exh. Exh. Exh. Exh. Exh. Exh. Exh. Exh. Int. Int. Int. Int. Int. Int.
1.600" 1.600" 1.600" 1.600" 1.600" 1.600" 1.600" 1.625" 1.625" 1.625" 2.020" 2.055" 2.055" 2.080" 2.080" 2.080"
11/32" 11/32" 11/32" 11/32" 11/32" 11/32" 7mm 11/32" 11/32" 11/32" 11/32" 11/32" 11/32" 11/32" 11/32" 11/32"
4.960" 4.960" 5.010" 5.060" 5.060" 5.160" 5.010" 5.060" 5.160" 5.560" 4.960" 5.010" 5.060" 5.010" 5.060" 5.160"
14° Super Flo, Stock/+.050" 12° Super Flo, Stock/+.050" 14° Super Flo, +.050"/+.100" 14° Super Flo, +.100" 19° Tulip Super Flo, +.100" 14° Super Flo, Bro./Pont., +.200" 24° Flo/Ultra Light/Radial Groove 20° Tulip Super Flo, +.100" 14° Super Flo, Bro./Pont., +.200" 14° Super Flo/Dart/Brodix 18°/+.600" 12° Super Flo, Stock/+.050" 12° Super Flo, +.050"/+.100" 14° Super Flo, +.100" 12° Super Flo, +.050"/+.100" 12° Super Flo, +.100" 12° Super Flo, Bro./Pont., +.200"
FERF1100PQ-8
FERF1115P-8
NEW VENDOR
Fire Suppression Systems Fire is one of the most terrifying dangers of racing. Strike back with Firebottle. A quick pull of a cable and Firebottle quickly discharges clean, electrically non-conductive fire quencher (NASCAR-approved Dupont FE36). Systems include mounting bracket, engine and cockpit nozzles, stainless steel PVC lined cable, and anodized actuating head. All bottles are D.O.T. approved. Part No.
Description
Chemical
Cylinder Material
Total Weight
Unit Length
Unit Dia.
Aluminum Steel Aluminum
9 lbs. 8 lbs. 9 lbs.
16-3/4" 12-1/2" 16-3/4"
4-1/4" 4-1/2" 4-1/4"
Pull/Cable Activated Systems SAFRC501-FE36 5 lb. Manual Dupont FE36 SAFRC503* 5 lb. Manual Dupont FE36 SAFRC510† 5 lb. Manual Dupont FE36 *Compact bottle. †System with steel tubing.
SAFRC501-FE36
Replacement Components For Fire Suppression Systems Part No.
SAFCA
Description
SAFCA ........................4' Replacement Cable SAFCA8 ......................8' Replacement Cable SAFFK.........................Fitting Kit SAFNO1 ......................Aluminum Nozzle SAFRC500S-FE36 .......Spare Bottle For RC500/RC501 Filled With Dupont FE36 SAFSTK ......................Steel Tubing Kit SAFTK.........................Spare Fitting and Tubing Kit
NEW VENDOR
Intake Manifold Gaskets Part No.
Description
Small Block Chevy 265-400 FTG8001 Small Port FTG8002 Medium Port FTG8003 Large Port FTG8004 Extra Large Port FTG8067 Extra Large Port
Thickness
Port Size
.060" .060" .060" .060" .100"
1.30" x 2.08" 1.31" x 2.18" 1.38" x 2.28" 1.38" x 2.34" 1.38" x 2.38"
SAFTK
“SaberSeal MLS” Head Gaskets Multi-layer steel gaskets have smooth contours and tight tolerances for better fit. Sold individually. Note: MLS head gaskets require block and head finishes below 80 RMS for best sealing. Part No.
Description
Small Block Chevy 265-400 FTG917644200 With Steam Holes FTG917744165 With Steam Holes FTG918044060 18°/23°
2010
081-096OW10.indd 89
Gasket Bore
Nom. Comp. Thickness
4.200" 4.165" 4.060"
.040" .040" .040"
89
11/10/09 9:26:22 AM
NEW VENDOR
Series 8000 Push-Lite Race Hose Ends
Series 2000 Pro-Flow Hose Ends
Manufactured from lightweight aluminum with an attractive black anodized finish, Push-Lite Race Hose Ends feature a barbed end that combines ease of assembly and a leakproof seal.
Pro-Flow Hose Ends utilize a “single nipple”, which allows the socket to draw the hose over a long tapered single nipple, effectively sealing the hose between the inside of the socket and the outside of the nipple. Hose ends are easily re-used due to the fact that there is no sliver of cut hose to remove before installing the fitting on a new length of hose. Fittings have a black anodized finish.
Part No.
Straight FRG200104-BL FRG200106-BL FRG200108-BL FRG200110-BL FRG200112-BL FRG200116-BL 30° FRG203006-BL FRG203008-BL FRG203010-BL FRG203012-BL FRG203016-BL 45° FRG204504-BL FRG204506-BL FRG204508-BL FRG204510-BL FRG204512-BL FRG204516-BL 60° FRG206006-BL FRG206008-BL FRG206010-BL FRG206012-BL FRG206016-BL 90° FRG209004-BL FRG209006-BL FRG209008-BL FRG209010-BL FRG209012-BL FRG209016-BL 120° FRG212006-BL FRG212008-BL FRG212010-BL FRG212012-BL FRG212016-BL 150° FRG215006-BL FRG215008-BL FRG215010-BL FRG215012-BL FRG215016-BL 180° FRG218006-BL FRG218008-BL FRG218010-BL FRG218012-BL FRG218016-BL
Andy Teunessen
90
Hose Size
-4 -6 -8 -10 -12 -16
Part No.
Straight FRG220104-BL FRG220106-BL FRG220108-BL FRG220110-BL FRG220112-BL FRG220116-BL 30° FRG223004-BL FRG223006-BL FRG223008-BL FRG223010-BL FRG223012-BL FRG223016-BL 45° FRG224504-BL FRG224506-BL FRG224508-BL FRG224510-BL FRG224512-BL FRG224516-BL 60° FRG226004-BL FRG226006-BL FRG226008-BL FRG226010-BL FRG226012-BL FRG226016-BL 90° FRG229004-BL FRG229006-BL FRG229008-BL FRG229010-BL FRG229012-BL FRG229016-BL 120° FRG231204-BL FRG231206-BL FRG231208-BL FRG231210-BL FRG231212-BL FRG231216-BL 150° FRG231504-BL FRG231506-BL FRG231508-BL FRG231510-BL FRG231512-BL FRG231516-BL 180° FRG231804-BL FRG231806-BL FRG231808-BL FRG231810-BL FRG231812-BL FRG231816-BL
-6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -6 -8 -10 -12 -16 -6 -8 -10 -12 -16 -6 -8 -10 -12 -16
Hose Size
-4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16 -4 -6 -8 -10 -12 -16
Photo: Doug Swift
2010
081-096OW10.indd 90
11/10/09 9:26:37 AM
NEW VENDOR
Aluminum AN To NPT Adapters
Gauge Adapters Part No.
Description
FRG495005-BL ......... -6 Male x -6 Female, Inline, 1/8" FPT On Side FRG495020-BL ......... -3 x 1/8" FPT Straight
Hose Pressure Test Kit FRG900060 Hose Size
NPT Size
Straight Part No.
45° Part No.
90° Part No.
-3 -4 -4 -4 -6 -6 -6 -6 -8 -8 -8 -10 -10 -10 -12 -12 -16 -16
1/8" 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 1/2" 3/8" 3/4" 1/2" 3/4" 1"
FRG481603-BL FRG481604-BL FRG481605-BL FRG481644-BL FRG481662-BL FRG481606-BL FRG481666-BL FRG481668-BL FRG481607-BL FRG481608-BL FRG481688-BL FRG481609-BL FRG481610-BL FRG481611-BL FRG481612-BL FRG481613-BL FRG481615-BL FRG481616-BL
FRG482303-BL FRG482304-BL FRG482344-BL – FRG482362-BL FRG482306-BL FRG482366-BL FRG482368-BL FRG482307-BL FRG482308-BL FRG482388-BL – FRG482310-BL FRG482311-BL FRG482312-BL FRG482313-BL – FRG482316-BL
FRG482203-BL FRG482204-BL FRG482244-BL – FRG482262-BL FRG482206-BL FRG482266-BL FRG482268-BL FRG482207-BL FRG482208-BL FRG482288-BL FRG482209-BL FRG482210-BL FRG482211-BL FRG482212-BL FRG482213-BL FRG482215-BL FRG482216-BL
Aluminum AN Adapters Part No.
Union FRG481503-BL FRG481504-BL FRG481506-BL FRG481508-BL FRG481510-BL FRG481512-BL FRG481516-BL Tee FRG482403-BL FRG482404-BL FRG482406-BL FRG482408-BL FRG482410-BL FRG482412-BL FRG482416-BL Straight Bulkhead FRG483203-BL FRG483204-BL FRG483206-BL FRG483208-BL FRG483210-BL FRG483212-BL FRG483216-BL FRG483220-BL Bulkhead Nut FRG492403-BL FRG492404-BL FRG492406-BL FRG492408-BL FRG492410-BL FRG492412-BL FRG492416-BL FRG492420-BL Tee Swivel On Side FRG498203-BL FRG498204-BL
Hose Size
-3 -4 -6 -8 -10 -12 -16
Handy kit allows the quick testing of AN hose assemblies. A compressed air source and water bath to submerge assemblies is all that is needed to check for leaks. Kit includes individual line testers for -3 through -16. Individual line testers may also be purchased separately. Individual Line Testers Part No.
Hose Size
FRG900663 .......-3 FRG900664 .......-4 FRG900666 .......-6 FRG900668 .......-8 FRG900670 .......-10 FRG900672 .......-12 FRG900676 .......-16
37° Flaring Tool FRG900500 Economical flaring tool allows forming an AN specification 37° JIC flare to 3/16" through 5/8" diameter hard line tubing.
-3 -4 -6 -8 -10 -12 -16
NEW VENDOR
-3 -4 -6 -8 -10 -12 -16 -20 -3 -4 -6 -8 -10 -12 -16 -20 -6 -8
Full line is now available! Call us for more information. 2010
081-096OW10.indd 91
91
11/10/09 9:27:03 AM
NEW VENDOR
Fluid Transfer Systems
Pump Supply Systems
A safe, quick and effective method of pumping or drawing gasoline, alcohol or oil at a rate of five gallons per minute. Transfer liquids from utility jugs, fuel tanks, cells, etc. Fluid transfer systems are offered in 10 or 15 gallon versions. Specify blue, clear or red utility jug when ordering.
Transfer fuel, oil, etc. quickly, safely and effectively from utility jugs or large drums. Pump supply systems are offered to transfer liquids from 5 or 7.5 gallon utility jugs, or 55 gallon drums.
Part No.
Part No.
Description
FLF20210 ..........10 Gallon System, Includes Pump System (FLF30301), (2) White 5 Gallon Utility Jugs And Heavy Duty, 200 lb. Capacity Cart With Telescoping Handle (FLF60602). FLF20216R ........15 Gallon System, Includes Pump System (FLF30301), (2) Red 7.5 Gallon Utility Jugs (FLF75001) And Fold-Up, 200 lb. Capacity Cart With Telescoping Handle (FLF60602). Replacement Components FLF60602 ..........Fold-Up 200 lb. Capacity Cart FLF75001 ..........7.5 Gallon Utility Jug, Red
Description
FLF30301 ..........Pump Supply System, Fits 5 Or 7.5 Gallon Jugs FLF30304-1.......Pump Supply System, Fits 5 Or 7.5 Gallon Utility Jugs And 55 Gallon Drums System Accessories FLF40402 ..........5' Hose Extension Kit, Allows Transferring Liquids From Large Tanks FLF40405 ..........Drum Extractor Kit, Adapts Pump Supply System (FLF30301) To 55 Gallon Drum FLF80803 ..........Draw Tube Extension, Adapts Pump Supply System To 15 Gallon Utility Jug
Ford Type FRAHP1, GM Type FRAHP4
2 Quart Capacity FRAHP6A
Fram high performance oil filters have an anti-drainback valve, and a relief valve which acts as an internal bypass, opening when inlet pressure is greater than outlet pressure. The HP1 Filter’s valve opens at a 9-12 psi differential; the HP4’s relief valve opens at 15-22 psi. Dimensions: 3-5/8" O.D. x 5-1/2" Ht. Micron Rating ..........................................25 Nominal Recommended Max. Oper. Press. .............200 PSI Recommended Max. Flow Rate ...............10 GPM-Outside To Center Relief Valve Setting ...................................HP1 / 9-12 PSI, HP4 / 15-22 PSI Min. Hydrostatic Burst Pressure ...............HP1 / 500 PSI, HP4 / 325 PSI Thread Size ..............................................HP1 / 3/4"-16, HP4 / 13/16"-16
No relief valve or anti-drainback valve. Used with the Fram HPK6, HPK600 adapter kits for racing applications. 4-5/8" O.D. 6-11/16" Ht. Micron Rating .................................................................. 15 Nominal Recommended Max. Oper. Press. .................................... 200 PSI Recommended Max. Flow Rate ...................................... 20 GPM Outside To Center Min. Hydrostatic Burst Press. ............. 400 PS Straight Thread Size ........................................................ 1-1/2"-12
Mini Sprint R6 Oil Filters Part No.
Description
FRAPH6017A ............ R6 Oil Filter FRAPH6607 .............. Short R6 Oil Filter
Outlaw Sprint/Mini Sprint Tail Tanks
The Dominator Sprint Tail Tank Dominator tail tank holds 30 gallons. Get the edge with increased capacity and improved fuel weight distribution. Molded-in inserts facilitate side mounting. A step on the lower section places weight on rear torsion tubes to clear brake rotors and rear end vents. Includes a top pickup and -12AN fittings. Description
Tail Tank Part No.
Complete Assy. Part No.
30 Gallon Dominator Tail Tank
FUEST130
FUESB230AT
Sprint Tail Tank Hardware
Tank for winged sprint cars holds 28 gallons and locates over 200 lbs. of fuel 4" farther forward than conventional tanks. Molded-in inserts facilitate side mounting and a step on the lower section places weight on rear torsion tubes to clear brake rotors and rear end vents. Includes a top pickup and -12AN fittings. Bottom pickup and Ultra-lite Outlaw tanks are available on special order. Description
Bladder Part No.
Standard 28 Gallon Outlaw Tail Tank Standard 16 Gallon Outlaw Tail Tank
FUESB128TP –
Tail Tank Part No.
Complete Assy. Part No.
FUEST128-TP FUESB228TP-12 FUEMT116 FUEMB216
Ultra-Cell Bladders Lightweight nylon/rubber Bladders for micro, midget, sprint or Silver Crown cars include nut rings, pick-up assemblies, and bolt and gasket kits. Use with alcohol (methanol and ethanol) only. Part No.
Description
FUESB128TP .....Outlaw Sprint Car Bladder, 28 Gallon, Fits FUEST128 Hardware is designed for use with the new Dominator tail tank assembly. Part No.
Description
FUEITVV10LP-S......... -10 Low Profile In-Tank Check Valve Assembly FUEITVV10AFK .......... -10 Vent Valve Air Filter
92
Fill Plate With Flush Cap Standard 4" x 6", lightweight Fill Plate. Part No.
Description
FUESF4X6A............... Standard 4" x 6" Fill Plate FUE1GAS98 .............. Fill Plate Gasket Other Tanks And Bladders Are Available. Please Call For More Information.
2010
081-096OW10.indd 92
11/12/09 3:39:44 PM
G-Force Helmets
GF505 Racing Suits
A complete line of revolutionary, lightweight helmets that incorporate mounting points for the Hans® Device and, unless otherwise noted, meet Snell SA2005 and SFI 31.2A (open face) or 31.2A (full face) specs. See the size chart for proper helmet selection.
The GF505 triple-layer racing suit’s Pyrovatex shell and exclusive Coolquilt liner provide breathable comfort. A second, fire retardant fabric liner wicks moisture away from the body. Suits have white billboards and are trimmed with contrasting piping, white arm and leg stripes, large pockets, brass zippers with Nomex tape, Nomex cuffs and Nomex neck enclosures for extra protection. Available in one- or two-piece (jacket and pants). Suits meet SFI 3.2A/5 specifications and are available in black, red or blue.
Pro Eliminator And Pro Eliminator X Sleek Pro Eliminator and Pro Eliminator X lightweight Z38 composite shells with G-Flow ventilation let cool air in and hot air out through the top and back. Hypoallergenic CoolTec liner contributes to overall driver comfort. The Pro Eliminator is available in white or black; the Pro Eliminator X is available in black with flamed graphics only. SA2005 White Part No.
Black Part No.
One-Piece Suits Color
Size
Pro Eliminator GFR3003SW GFR3003SB GFR3003MW GFR3003MB GFR3003LW GFR3003LB GFR3003XW GFR3003XB GFR3003XXW GFR3003XXB Pro Eliminator X – GFR3005SB – GFR3005MB – GFR3005LB – GFR3005XB – GFR3005XXB
Small Medium Large X-Large XX-Large
Pro Eliminator X
Shield Description
Pro Eliminator Pro Eliminator X SA2005
Eliminator Eliminator X M2005
ProFit Clear ProFit Smoke ProFit Mirror Smoke ProFit Amber ProFit Blue Mirror ProFit Light Smoke
GFRGF-8601 GFRGF-8602 GFRGF-8603 GFRGF-8604 GFRGF-8605 GFRGF-8606
GFRGF-8601 GFRGF-8602 GFRGF-8603 GFRGF-8604 GFRGF-8605 GFRGF-8606
HELMET SIZE CONVERSION CHART Measurement
Size
Metric
20-1/2" 20-7/8" 21-1/4" 21-5/8" 22" 22-3/8" 22-3/4" 23-1/8" 23-1/2" 23-7/8" 24-1/4" 24-3/4" 25-1/8"
6-1/2 (XX Small) 6-5/8 (X Small) 6-3/4 (X Small) 6-7/8 (Small) 7 (Small) 7-1/8 (Medium) 7-1/4 (Medium) 7-3/8 (Large) 7-1/2 (Large) 7-5/8 (X Large) 7-3/4 (X Large) 7-7/8 (XX Large) 8 (XX Large)
52 53 54 55 56 57 58 59 60 61 62 63 64
Description
Large
XX-Large
GFR4380XXLBK – –
Multi-layer racing suit's Pyrovatex fabric provides a TPP (Thermal Protective Performance) rating of 21 to meet SFI 3.2A/5 specifications. The attractive, bright semi-gloss finish and straight black epaulets cover an inner layer that wicks moisture and breathes for added comfort. The SFI tag is on the left arm cuff for easy tech inspection. Choose among one-piece suits in black, red or blue.
One-Piece Suits Color
Medium
Large
X-Large
XX-Large
Black Red Blue
GFR4525MBK GFR4525MRD GFR4525MBL
GFR4525LBK GFR4525LRD GFR4525LBL
GFR4525XBK GFR4525XRD GFR4525XBL
GFR4525XXBK GFR4525XXRD GFR4525XXBL
GF545 Racing Suits Double layer, GF545 racing suit's GTEX outer layer and Nomex knit inner layer combine for a soft knit feel and cool interior. The 360°, soft knit arm gussets and 360° armholes offer greater range of motion, and contrasting box stitching accents appearance and adds durability. Suit meets stringent SFI 3.2A/5 specifications and has a TPP (Thermal Protective Performance) rating of 23. Choose from one-piece suits in black, red or blue.
One-Piece Suits NEW!
GFRGF-8006 ......Plastic Tear-Off Posts GFRGF-8600 ......Pivot Kit (ProFit), All New Model Helmets
Color
Medium
Large
X-Large
Black Red Blue
GFR4545MBK GFR4545MRD GFR4545MBL
GFR4545LBK GFR4545LRD GFR4545LBL
GFR4545XBK GFR4545XRD GFR4545XBL
2010
081-096OW10.indd 93
X-Large
GF525 Racing Suits
HELMET SHIELD CHART
Part No.
Medium
Pro Eliminator
Small Medium Large X-Large XX-Large
Helmet Accessories
Small
Black GFR4380SBK GFR4380MBK GFR4380LBK GFR4380XBK Red GFR4380SRD GFR4380MRD GFR4380LRD GFR4380XRD Blue GFR4380SBL GFR4380MBL GFR4380LBL GFR4380XBL
93
11/12/09 11:38:10 AM
G5 Racing Gloves
Helmet Bags
Lightweight, flexible gloves are sewn from quality Nomex and leather. Gloves include reinforced leather palms and knuckle pads, adjustable Velcro wrist closures and meet SFI 3.3/5 specifications. Available in black, blue or red.
Durable fleece lined nylon bag will help keep helmet looking new and shields scratch-free.
Color
Small
Medium
Large
X-Large
Black Blue Red
GFR4101SBK GFR4101SBL GFR4101SRD
GFR4101MBK GFR4101MBL GFR4101MRD
GFR4101LBK GFR4101LBL GFR4101LRD
GFR4101XBK GFR4101XBL GFR4101XRD
Description
Black Part No.
Blue Part No.
Helmet Bag
GFRGF-4088BK
GFRGF-4088BL
Helmet Skirts Soft knit fire-retardant skirts have an extra wide Velcro strap for fastening. Description
Black Part No.
Red Part No.
Blue Part No.
Helmet Skirt GFRGF-4240BK GFRGF-4240RD GFRGF-4240BL
GF235 RaceGrip Mid-Top Racing Shoes
Flame-Retardant Balaclavas
High quality suede leather racing shoe has an exclusive rubber RaceGrip sole for exceptional pedal feel. The CoolTec liner and RaceGrip inner sole and arch support deliver extra comfort. Offered in black, blue or red in sizes 5-13.
Provides an extra level of protection to the head and face. Choose single or double eyeport. Description
Size
Black
Blue
Red
5 6 7 8 9 10 11 12 13
GFR0235BK5 GFR0235BK6 GFR0235BK7 GFR0235BK8 GFR0235BK9 GFR0235BK10 GFR0235BK11 GFR0235BK12 GFR0235BK13
GFR0235BL5 GFR0235BL6 GFR0235BL7 GFR0235BL8 GFR0235BL9 GFR0235BL10 GFR0235BL11 GFR0235BL12 GFR0235BL13
– GFR0235RD6 GFR0235RD7 GFR0235RD8 GFR0235RD9 GFR0235RD10 GFR0235RD11 GFR0235RD12 GFR0235RD13
Flame-Retardant Underwear
Small
Black
Blue
Red
GFR41121L1BU GFR41122L1BU –
GFR41121L1RD GFR41122L1RD –
Helmet Supports G-Force 360° Helmet Supports are made from high density, fire retardant foam covered with soft, knit CoolTec material. Available in black, blue or red, in small, medium and large sizes. Meets SFI 3.3 Specs. Color
Small
Medium
Large
Black Blue Red
GFR4122SBK GFR4122SBL GFR4122SRD
GFR4122MBK GFR4122MBL GFR4122MRD
GFR4122LBK GFR4122LBL GFR4122LRD
Latch And Link Harnesses
Flame-retardant underwear is the essential foundation of any racing uniform. Tops and bottoms are available in natural color. Color
Natural
Single Eyeport/Single Layer GFR41121L1NT GFR41121L1BK Single Eyeport/Double Layer GFR41122L1NT GFR41122L1BK Double Eyeport/Double Layer GFR41122L2NT GFR41122L2BK
Medium
Large
X-Large
Tops 36-38 38-42 42-46 46-49 Natural GFR4160SNT GFR4160MNT GFR4160LNT GFR4160XNT Bottoms 29-32 32-35 38-40 41-43 Natural GFR4161SNT GFR4161MNT GFR4161LNT GFR4161XNT Note: It is highly recommended that a layer of underwear be worn with all suits for added protection, particularly when using a single layer suit.
Harnesses are constructed from low-stretch, PolyTek comfort-coated webbing and combined with 3" bolt-end hardware, rather than the traditional 2". Double adjustable belts adjust at the normal points and at the mounting points to fit virtually any application. Sets include 3" lap and shoulder belts, and 1.75" submarine belt. Harnesses meet stringent SFI 16.1 specifications, and are offered in black, blue or red. Description
Black
Individual Shoulder Harness Sets 5-Pt., Pull-Down GFR6000BK 5-Pt., Pull-Up GFR6100BK
Blue
Red
GFR6000BL GFR6100BL
GFR6000RD GFR6100RD
Harness Pads Flame-Retardant Socks Description
Small
Size 3-5 Nomex Socks GFR4140SCT
Medium
Large
X-Large
5-7 GFR4140MCT
7-9 GFR4140LCT
10-13 GFR4140XCT
G-Force Harness Pads provide an extra measure of comfort and safety for the driver. Covered in flame-retardant fabric with Velcro closures. Sold in pairs and are available in black, blue or red. Description
Black Part No.
Red Part No.
Blue Part No.
Harness Pad
GFR4098BK
GFR4098RD
GFR4098BL
Arm Restraints High strength nylon arm restraints are covered in foam and flame-retardant cloth. Available in black, blue or red.
94
2010
081-096OW10.indd 94
Description
Black Part No.
Red Part No.
Blue Part No.
Arm Restraints
GFR4087BK
GFR4087RD
GFR4087BL
11/10/09 9:28:48 AM
Aluminum Sprint Car Radiators Griffin aluminum sprint car radiators cool more effectively than others that are twice as thick. Lightweight radiators are heli-arc welded to help them withstand even the roughest track conditions. Engineered to fit Maxim, Gambler, Stealth, J&J, Schnee and many other chassis. Custom radiators for almost any configuration are also available on a special order basis. Part No.
Size
Tube Size
GRI325152X GRI345161X
22" x 19" 2-Row 22" x 20" 1-Row
1.00" 1.25"
Billet Aluminum Filler Neck GRIPN19
NEW VENDOR
Nields Quicksteer By GME GMEA9467AHS Regardless of steering configuration on the sprint car, the Nields Quicksteer by GME will fit thanks to the removable right hand tube that changes the box from full length to half length. The adjustable steering reservoir pivots and slides on the left steering tube. The Quicksteer can be easily installed. Includes a spin-on tube and quick release.
MaxOut Fire Extinguishers
GME267X01
GME110A03
Components For Nields Quicksteer By GME
Dry chemical fire extinguishers deliver fire protection in an automotive environment. Rechargeable steel cylinders are manufactured in the U.S. and have all-metal valves and a 6 year warranty. Choose red or chrome finishes. Description
Red Part No.
Chrome Part No.
1.0 Lb. System, 2B:C Rated 2.5 Lb. System, 1A:10B:C
H3RMX100R H3RMX250R
H3RMX100C H3RMX250C
Replacement components for the Quicksteer. Part No.
Description
GME100A01 ............. Adjustable Slide-On Reservoir GME105X04 ............. Pitman Arm, Angle Broached GME110A03 ............. Quick Release Push-On GME132X01 ............. Half Gear Mounting Bracket GME240-01 .............. Lid For Reservoir GME267X01 ............. Spin-On Tube for Right Side
HalGuard Fire Extinguishers GME100A01
Power Steering Pump GMEPAS1400HG NEW! Brand new power steering pump, designed for Sprints or Midgets, is fully CNC-machined from billet 7075 aluminum and weighs in at only 2.65 lbs. Compatible to drive off of standard or raised cam engines, pump uses precision ground internal gears for optimum pressure. Sold complete with mounting adapter, -10 suction and -6 pressure fittings.
Power Steering Fluid Part No.
NEW!
HalGuard extinguishers are filled with "clean" agent gas that not only combats fire, but leaves no residue. Ideal for race car protection, U.S. made units are offered in 1.4, 2.5 and 5 Lb. versions. Choose from red or chrome steel cylinders. Description
Red Part No.
Chrome Part No.
1.4 Lb. System, 1B:C Rated 2.5 Lb. System, 2B:C Rated 5 Lb. System, 5B:C Rated
H3RHG100R H3RHG250R H3RHG500R
H3RHG100C H3RHG250C H3RHG500C
Quick Release Mounting Accessories Billet aluminum mounts provide quick, easy fire extinguisher access. Choose polished or brushed finish mounts. Note: Band clamps and mounts must be used together. To order, select the proper diameter band clamp and choice of flat surface or roll bar mount.
Description
GME125-01 .............. 1 Quart GME125-02 .............. Case of 8 Quarts GME125-01
Description
Polished Part No.
Brushed Part No.
Band Clamp, 1.0/1.4 Lb. Bottle Band Clamp, 2.5 Lb. Bottle Flat Surface Mount 1-5/8" Dia. Roll Bar Mount 1-3/4" Dia. Roll Bar Mount 2" Dia. Roll Bar Mount 2-1/4" Dia. Roll Bar Mount
H3RBB100P H3RBB250P H3RBMF01P H3RBMR01P H3RBMR02P H3RBMR03P H3RBMR04P
H3RBB100B H3RBB250B H3RBMF01B H3RBMR01B H3RBMR02B H3RBMR03B H3RBMR04B
2010
081-096OW10.indd 95
95
11/10/09 9:29:08 AM
Top Wings
Front Bumpers
Hepfner Racing Products is a leader in the design and manufacturing of sprint car wings. CNC punched and formed, each wing is identical and all internal components are formed and lightened. Made from .020" 6061 aluminum with 4130 plated steel internal posts.
Tubular front bumpers, in lightweight aluminum or stainless steel, are 19" wide and 7" deep.
Part No.
Rear Bumper HRP8077
Description
HRPFLT0510 ........... Top Wing Flat NEW! ............................... With Recessed Rivets HRPFLT0510-K ....... Top Wing Flat With ............................... Recessed Rivets, In Kit Form, ............................... Comes in a Tube, UPS Able NEW! HRPNPD0512.......... Top Wing, 2-1/2" Dished, ............................... Non-Recessed Rivets NEW! HRPNPD0512-K ...... Top Wing, 2-1/2" Dished, ............................... With Recessed Rivets, Kit Form, UPS Able NEW! HRP85186 .............. Top Wing Posts, 2 Pcs.
Nose Wing HRPVFT0801-S “Super” nose wing is tall and angled with a 1" dish for increased downforce. Exclusive recessed rivet design means greater strength, improved aerodynamics, quicker mud removal and easier vinyl application. CNC punched and formed, each wing is identical.
Radiator Air Box Aluminum air box has lightening holes, fully radiused edges and preformed quick fastener flanges. Fits 20" wide radiators in Maxim or Eagle chassis. Part No.
Description
HRP8300 ...........Air Box Channel HRP8301 ...........Air Box Front Panel
Part No.
Description
HRP8075 ...........Aluminum Bumper HRP8076 ...........Stainless Steel Bumper
Stainless steel, 1" dia. bumper fits Maxim, Eagle and Stealth chassis.
Nurf Bars “Shorty” nurf bars are 1" dia. stainless steel and fit Maxim and Eagle chassis. Part No.
Description
HRP8078 ...........Left Hand Nurf Bar HRP8079 ...........Right Hand Nurf Bar
Rear Wing Trees Tubular, telescoping rear wing trees support the rear of the top wing and reduce wind resistance on Eagle or Maxim chassis with HRP top wings. Part No.
Description
HRP8080 ...........Tubular 4130 Steel Rear Wing Tree HRP8082 ...........Aerodynamic Rear Wing Tree
Brake Pedal HRP8100 Manufactured from durable, 4130 chrome moly.
Heel Riser HRP8063 MSD Box Mount HRP8360 .050" thick aluminum Mount is drilled to accept an MSD Ignition control and has quick fastener flanges.
Two-Gauge Mount HRP8361 Aluminum gauge mount accepts 2-5/8" dia. gauges and has a shut-off switch hole and quick fastener flanges.
Radiator Rock Screen HRP8067 Rock screen, made of .050" thick aluminum with billet frame and fitted with a stainless steel mesh, protects radiator from rocks and debris.
Tapered aluminum heel riser is 1-1/2" tall and mounts under the accelerator pedal for improved leverage and comfort.
Power Steering Top Plate HRP8299 Billet aluminum, short top plate mounts power steering box to chassis.
Tel-Tac Dash Mount Brackets HRP8362 Mount a Tel-Tac at the proper angle. Aluminum brackets install using quick fasteners.
Torque Ball Shield HRP8225 Protects driver’s legs and feet during a U-joint failure.
Rock Screen HRP8069 Black powder coated, mandrel bent steel Screen attaches to the roll cage of most chassis and adds protection for driver.
96
2010
081-096OW10.indd 96
11/10/09 9:29:37 AM
Trailer Accessories Part No.
Fuel Funnel Wall Rack HRP6261
HRP6781 (Tank not Included)
Description
HRP6009 ...........Nose Wing Tray HRP6550 ...........Top Wing Wall Tray HRP6551 ...........Top Wing Roof Mount HRP6553 ...........Vertical Nose Wing Mount HRP6776 ...........Axle Rack, Two Front Axles, One Rear End HRP678-3..........Steering Gear Wall Mount, Gen. 2 HRP6781 ...........Fuel Cell Wall Mount
Aluminum rack stores a â&#x20AC;&#x153;Dâ&#x20AC;?-shaped fuel funnel.
Tire Gauge Holder Stores tire gauge in a convenient spot. Part No.
Description
HRP6380 ...........Small Tire Gauge Holder HRP6383 ...........Large Tire Gauge Holder
Header Rack HRP6700A Stainless steel rack hugs the trailer wall and holds spare exhaust headers tightly. Accepts spread port small block Chevy headers. Sold each.
HRP6553
Ratchet Strap Holder HRP6007
HRP6009
Keep ratchet straps organized with this 8" long strap holder. Holds two tie downs.
Wall Mount Spacer Tray HRP6181
Nitrogen Bottle Holder HRP6060
Aluminum tray is 23" long, mounts on trailer wall to keep axle spacers in a convenient location.
Two-piece holder keeps bottle secure.
NEW VENDOR
Racing Piston Rings Hastings racing piston ring's low tension, low friction design provides unsurpassed combustion seating and exceptional sealing. Sets include plasma moly, high tensile cast iron top rings; reverse twist, taper-faced cast iron second rings, and choice of standard or low tension Flex-Vent stainless steel oil control rings. Low tension oil rings make significant increases in horsepower and are for racing only. Sets listed must be file-fitted. Instructions for file fitting included.
Billy Hafemann
File-Fit Piston Ring Sets Part No.
Bore Size
Top Ring
Second Ring
Oil Ring
Oil Ring Tension
HAS2M5508005 HAS2M5521005 HAS2M5523005 HAS2M5505005 HAS2M5508025 HAS2M5521025 HAS2M5505025 HAS2M5523025 HAS2M5508035 HAS2M5521035 HAS2M5505035 HAS2M5538035 HAS2M5540035 HAS2M5523035 HAS2M5508045 HAS2M5521045 HAS2M5523045 HAS2M5505045 HAS2M5540045 HAS2M5508065 HAS2M5521065 HAS2M5523065 HAS2M5505065 HAS2M5525035 HAS2M5513005 HAS2M5529005 HAS2M5510005 HAS2M5529025 HAS2M5510025 HAS2M5513035 HAS2M5529035 HAS2M5510035
4.000" 4.000" 4.000" 4.000" 4.020" 4.020" 4.020" 4.020" 4.030" 4.030" 4.030" 4.030" 4.030" 4.030" 4.040" 4.040" 4.040" 4.040" 4.040" 4.060" 4.060" 4.060" 4.060" 4.080" 4.125" 4.125" 4.125" 4.145" 4.145" 4.155" 4.155" 4.155"
5/64" 1/16" 1/16" 1/16" 5/64"9 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 1.5mm 1/16" 5/64" 1/16" 1/16" 1/16" 1.5mm 5/64" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16"
5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 1.5mm 1/16" 5/64" 1/16" 1/16" 1/16" 1.5mm 5/64" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16"
3/16" 1/8" 3/16" 3/16" 3/16" 1/8" 3/16" 3/16" 3/16" 1/8" 3/16" 3.0mm 3.0mm 3/16" 3/16" 1/8" 3/16" 3/16" 3.0mm 3/16" 1/8" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16"
Standard Standard Standard Low Standard Standard Low Standard Standard Standard Low Standard Standard Standard Standard Standard Standard Low Standard Standard Standard Standard Low Standard Standard Standard Low Standard Low Standard Standard Low
Photo: John Berglund
2010
097-112OW10.indd 97
97
11/10/09 9:32:26 AM
Hawk Brakes provide fade free, longer lasting performance from start to finish. Ferro-Carbon Semi Metallic Racing Pads are burnished with no break-in required, run up to 200°F. cooler and provide instant response with no lag. Rotor-friendly pads also have a high coefficient of friction and low wear rate. Consistent, predictable performance lap after lap. Proven in NASCAR, Indy Car, SCCA, IMSA, DIRT, Hooters Cup and ASA.
HAWK PADS ARE AVAILABLE IN SEVEN COMPOUNDS HP Plus: Good low temperature performance with much better resistance to brake squeal, dust and rotor damage compared to full racing compounds. Recommended for dirt street stock and economodified applications. Black: Excellent stopping force with very little fade. Provides good pad wear and is rotor friendly. Recommended for all dirt applications as well as low temperature asphalt. Blue MT-4: Superior stopping power with no fade. Excellent wear and braking at high temperatures. Less rotor friendly than the black compound. For heavy braking asphalt applications. HT-10: A medium to high torque compound with smooth initial bite. Excellent apply and release characteristics. Ideal for cars with extremely high deceleration rates and down force.
DTC-05: Smooth, predictable pads provide lower torque in the low to mid-temperature range and are ideal for dirt circle track. DTC-30: Dirt track pad material. Unique driver controllability of brake torque allowing later and deeper brake use into the corners, while requiring less pedal effort and shorter pedal engagement times. Excellent release characteristics and requires no heat up or extensive bedding (break-in period) DTC-70: For asphalt applications, extremely high torque with aggressive controllable initial bite. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force.
Application
HP Plus Pads
Black Pads
Blue MT-4 Pads
HT-10 Pads
DTC-05 Pads
DTC-30 Pads
DTC-70 Pads
Wilwood Superlite Outlaw 3000/4000 Sierra XL Wilwood Dynalite Outlaw 2000 Wilwood DL Bridgebolt Wilwood DL Single Wilwood SL Bridgebolt Outlaw 1000 Sierra Single
HAWHB101N800 HAWHB101N800 HAWHB101N800 HAWHB100N480 HAWHB100N480 HAWHB237N625 HAWHB104N485 – HAWHB104N485 HAWHB104N485
HAWHB101M800 HAWHB101M800 HAWHB101M800 HAWHB100M480 HAWHB100M480 HAWHB237M625 HAWHB104M485 HAWHB521M800 HAWHB104M485 HAWHB104M485
HAWHB101L800 HAWHB101L800 HAWHB101L800 HAWHB100L480 HAWHB100L480 HAWHB237L625 HAWHB104L485 HAWHB521L800 HAWHB104L485 HAWHB104L485
HAWHB101S800 HAWHB101S800 HAWHB101S800 HAWHB100S480 HAWHB100S480 HAWHB237S625 HAWHB104S485 – HAWHB104S485 HAWHB104S485
HAWHB101H800 HAWHB101H800 HAWHB101H800 HAWHB100H480 HAWHB100H480 HAWHB237H625 HAWHB104H485 HAWHB521H800 HAWHB104H485 HAWHB104H485
HAWHB101W800 HAWHB101W800 HAWHB101W800 HAWHB100W480 HAWHB100W480 HAWHB237W625 HAWHB104W485 HAWHB521W800 HAWHB104W485 HAWHB104W485
HAWHB101U800 HAWHB101U800 HAWHB101U800 HAWHB100U480 HAWHB100U480 HAWHB237U625 – HAWHB521U800 – –
Electric In-Line Fuel Pumps Carbureted Bypass Style Fuel Pressure Regulator HLY12-803BP Adjustable regulator has 3/8" inlet and outlets and promotes quiet, efficient pump operation for systems with a return line to the tank. Adjusts from 4-1/2 to 9 PSI.
Fuel Pressure Regulator HLY12-704 Die cast aluminum regulator has a single 1/2" NPT inlet port, two 1/2" NPT outlet ports and a 7/16" restriction. Adjusts from 4-1/2 to 9 PSI.
Engineered for fuel injected engines, high output pumps are mounted in-line, rather than inside the fuel tank, for easy installation. Ideal for serious performance. Part No.
110 GPH “Blue” Electric Fuel Pump HLY12-802-1 Pump provides constant fuel flow with no pulsation. Pumps are pre-set at 14 PSI, with a free flow capacity of 110 GPH and a flow rate of 70 GPH at a steady 9 PSI. Pumps use an ex ternally accessible pressure relief valve and weigh only 3 lbs. Ser viceable from either the pump end or the brush end. Regulator HLY12-803 is included. Replacement Parts Part No.
Fuel Pressure Regulators Economical die cast aluminum fuel pressure regulators are available in low (1 to 4 PSI) and high (4-1/2 to 9 PSI) pressure versions. Each has 3/8" NPT ports and a 7/32" restriction. Part No.
Description
HLY12-803 ........High Pressure Regulator, 4-1/2 To 9 PSI HLY12-804 ........Low Pressure Regulator, 1 To 4 PSI HLY12-807 ........Diaphragm Repair Kit, For HLY12-803 And HLY12-804
98
Description
HLY12-920 ........480 PPH @ 15 PSI HLY12-927 ........258 PPH @ 15 PSI
Description
HLY12-806 ........Check Valve Kit HLY12-810 ........Safety Pressure Switch HLY12-811 ........Rotor And Vane Kit
97 GPH “Red” Electric Fuel Pump HLY12-801-1 Pump incorporates an externally accessible pressure relief valve, delivers 4-7 PSI and does not require a separate pressure regulator valve. Tumble polished, billet look pump weighs less than 3 lbs. and includes mounting bracket.
2010
097-112OW10.indd 98
11/10/09 9:32:53 AM
Fuel Injection Systems
Pills
Fuel injection units for small block Chevys with 1957-up cylinder heads include sealed nozzles for protection on dirt tracks. Please call a sales associate with specific requirements. All fuel injection units are special order. Ram tubes are not included and are sold individually.
Replacement pills are sold individually. Part No.
Description Part No.
HILF565-40 .. .040" Pill HILF565-45 .. .045" Pill HILF565-50 .. .050" Pill HILF565-55 .. .055" Pill HILF565-60 .. .060" Pill HILF565-65 .. .065" Pill HILF565-70 .. .070" Pill HILF565-75 .. .075" Pill
Description Part No.
HILF565-80..... .080" Pill HILF565-85..... .085" Pill HILF565-90..... .090" Pill HILF565-95..... .095" Pill HILF565-100... .100" Pill HILF565-105... .105" Pill HILF565-110... .110" Pill HILF565-115... .115" Pill
Description
HILF565-120 .. .120" Pill HILF565-125 .. .125" Pill HILF565-135 .. .135" Pill HILF565-140 .. .140" Pill HILF565-145 .. .145" Pill HILF565-150 .. .150" Pill HILF565-155 .. .155" Pill HILF565-160 .. .160" Pill
Competition Engine Heater HPE4000 Warm up an engine without starting it. A warm engine has less friction loss, maintains proper clearances and has more efficient combustion. Heater connects to the cooling system via an integrated check valve (sold separately). 8' long input and output hoses are included. The “rapid-heat” setting quickly heats the entire system. At 160°180°F, the unit automatically switches to a “maintain” mode. Heater is light (25 lbs.), compact (24" x 10" x 9") and requires a 4000 watt, 220 volt connection. Electric cord not included. May be used with 110V if used with below power cord splitter.
Integrated Cooling System Check Valve Valve fits in lower radiator hose and accepts standard dry break couplers on the Hot Head competition engine heater. Check Valves fit popular 1-3/4" dia. radiator hoses. Part No.
Description
HPE4175 ...........Check Valve, Includes (2) 1/2" NPT Fittings HPE4176 ...........Check Valve, Includes (2) -10AN Fittings
Remote Kit HPE5150 Power Cord Splitter HPE6000
For cars where lower radiator hose access is tight, remote kit attaches to roll cage or chassis tubing with included clamps, easing competition engine heater connection. Requires HPE4176 Hot Head Integrated Cooling System Check Valve.
Adapts 220V to dual 110V power cord splitter (3000W only) so that the Competition Engine Heater may be powered by a 4000 watt generator with dual 110V connections.
Small Block Chevy Pro Series 4340 Forged Crankshafts
Small Block Chevy Ultimate Duty Billet Connecting Rods American-made, true billet connecting rods are manufactured from certified 4340 steel and are fully CNC-machined. Rods, which are stress relieved and shot peened to eliminate the possibility of stress risers, are fitted with 7/16" ARP 2000 fasteners and bushed for fully floating wrist pins. Sold in sets of eight.
Top quality 4340 steel crankshafts are forged in the USA and machined by industry leader Callies Performance Products. Each crankshaft has journals with .125" Tru-Form fillet radii and 1" dia. Angalite lightening holes in all rod throws. Callies’ Perma-Tough surface hardens the units to a depth of .080". All main and rod journals have a roundness within 60 millionths and taper is held within .0003".
Part No.
Description
Journal
Length
Weight
Part No.
Description
Main
Stroke
Rod Length
HRCBR6000 HRCBR6125 HRCBR6200 HRCBR6300
SB Chevy Billet Rods SB Chevy Billet Rods SB Chevy Billet Rods SB Chevy Billet Rods
Large Large Large Large
6.000" 6.125" 6.200" 6.300"
668 grams 670 grams 644 grams 665 grams
HRC353457 HRC353760 HRC353860 HRC354060 HRC403860 HRC404060 HRC404260
SB Chevy Crankshaft SB Chevy Crankshaft SB Chevy Crankshaft SB Chevy Crankshaft SB Chevy Crankshaft SB Chevy Crankshaft SB Chevy Crankshaft
350 350 350 350 400 400 400
3.480" 3.750" 3.875" 4.000" 3.875" 4.000" 4.250"
5.700" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000"
2010
097-112OW10.indd 99
99
11/10/09 9:33:04 AM
R3 Head And Neck Restraint Restraint moves with the driver during a crash, maintaining the relationship of the head, neck and torso. System meets NASCAR mandated SFI 38.1 specifications. Systems may be strapped to the driver, or left in the car and anchored to the restraint system. Choose for 10° or 20° layback racing seats. 10° Layback Part No.
Description
20° Layback Part No.
Strap-On Systems Medium, 36"-42" Chest HUTR3-MED-10 HUTR3-MED-20 Large, 42"-48" Chest – HUTR3-LRG-20 In-Seat Systems Medium, 36"-42" Chest HUTR3-MED-10-IS HUTR3-MED-20-IS Large, 42"-48" Chest HUTR3-LRG-10-IS HUTR3-MED-20-IS
Hutchens Device Stabilizes the driver’s head throughout the race, providing safety, comfort and easy access. The system “anchors” to the lap belt buckle and has a quick, one time adjustment (no seat adjustments). The helmet D-ring kit attaches to either side of the helmet for even more protection. Part No.
Description
HUT-SML ...........Small, 30-1/2"-38" Chest, 27"-38" Waist, 4'-5'6" Height HUT-MED ...........Medium, 38"-45" Chest, 35"-45" Waist, 4'9"-5'10" Height HUT-LRG ............Large, 45"-52" Chest, 42"-52" Waist, 5'-6'6" Height HUT-DRK ...........Helmet D-Ring Kit
Hyperco Coil Springs are recognized by top competitors worldwide as one of the best available. Hyperco starts with the highest quality wire. Inspections are performed before, during, and after manufacturing to meet stringent quality standards. All Hypercoils are dark blue powder coated and etched with the rate.
Coil-Over Springs Blue Powder Coated
Blue Powder Coated Rate
Rate
10" Tall
1-7/8" I.D Coil-Over Springs 100 HYP1810D0100 112 HYP1810D0112 125 HYP1810D0125 137 HYP1810D0137 150 HYP1810D0150 162 HYP1810D0162 175 HYP1810D0175 185 HYP1810D0185 200 HYP1810D0200 225 HYP1810D0225 250 HYP1810D0250 275 HYP1810D0275 300 HYP1810D0300 325 HYP1810D0325 350 HYP1810D0350 375 HYP1810D0375 400 HYP1810D0400 425 HYP1810D0425 450 HYP1810D0450 475 HYP1810D0475 500 HYP1810D0500
8" Tall
2-1/4" I.D. Coil-Over Springs 200 HYP188A0200 250 HYP188A0250 275 HYP188A0275 300 HYP188A0300 325 HYP188A0325 350 HYP188A0350 375 HYP188A0375 400 HYP188A0400 425 HYP188A0425 450 HYP188A0450 475 HYP188A0500 500 HYP188A0550
D-Cel Harness Sprint car, go-cart or enduro racers will appreciate this unique harness. It can effect up to a 70% reduction in neck tension. System wraps around the driver, using the pelvis as an anchor. Harness assures easy access in and out of the car and has a quick, one time adjustment. Part No.
Description
HUTDCL-MED ....Medium, 150-200 lbs., 5'-6'4" Height HUTDCL-LRG .....Large, 200-290 lbs., 5'8"-6'6" Height HUTDCL-XLG .....X-Large, 290 lbs.+, 5'8"-6'6" Height
Hybrid Rage NEW! The Hybrid Rage combines comfort, security and stability with an economical price. SFI-38.1 certified system utilizes a seat belt stabilizing system that requires seat belt hook-up, yet offers an easier exit. Effective in rollover and multiple impacts. Sold complete with quick releases, D-ring kit, molded seat pad and installation manual. Part No.
Description
HUTHYR-MED-10 ...... Medium, 40"-44" Chest HUTHYR-LRG-10 ....... Large, 44"-48" Chest Note: Chest Strap Size Measurements Are With Driving Suit On.
Hybrid Head And Neck Restraint NEW! A combination of the R3 and Hutchens II, it's a technically advanced head and neck restraint system with Poly-Tech webbing for unsurpassed angular impact protection and improved stability. The low back design eases entry and exit. There are no annoying tops to hook on the bars during exits. Part No.
Description
Blue Powder Coated Rate
8" Tall
10" Tall
2-1/2" I.D. Coil-Over Springs 110 – HYPCO10-110 125 – HYPCO10-125 150 – HYPCO10-150 160 – – 175 – HYPCO10-175 185 – – 200 HYPCO8-200 HYPCO10-200 225 HYPCO8-225 HYPCO10-225 250 HYPCO8-250 HYPCO10-250 275 HYPCO8-275 HYPCO10-275 300 HYPCO8-300 HYPCO10-300 325 HYPCO8-325 HYPCO10-325 350 HYPCO8-350 HYPCO10-350 375 HYPCO8-375 HYPCO10-375 400 HYPCO8-400 HYPCO10-400 425 HYPCO8-425 HYPCO10-425 450 HYPCO8-450 HYPCO10-450 475 HYPCO8-475 HYPCO10-475 500 HYPCO8-500 HYPCO10-500 550 HYPCO8-550 HYPCO10-550 600 HYPCO8-600 HYPCO10-600 650 HYPCO8-650 HYPCO10-650 700 HYPCO8-700 HYPCO10-700 750 HYPCO8-750 – 800 HYPCO8-800 HYPCO10-800 850 HYPCO8-850 –
12" Tall
HYPCO12-110 HYPCO12-125 HYPCO12-150 – HYPCO12-175 HYPCO12-185 HYPCO12-200 HYPCO12-225 HYPCO12-250 HYPCO12-275 HYPCO12-300 HYPCO12-325 HYPCO12-350 HYPCO12-375 HYPCO12-400 HYPCO12-425 HYPCO12-450 HYPCO12-475 HYPCO12-500 HYPCO12-550 HYPCO12-600 HYPCO12-650 HYPCO12-700 HYPCO12-750 HYPCO12-800 HYPCO12-850
HYPCO10-110
HYPCO10-250
2-1/2" I.D. x 10" Tall Progressive Spring HYPCO10-175/500
HUTHYR-MED-20 ...... Medium, 36"-42" Chest HUTHYR-LRG-20 ....... Large, 42"-48" Chest HUTHYR-XLG-20 ....... X-Large, 48"-54" Chest
100
2010
097-112OW10.indd 100
11/10/09 9:33:22 AM
Vapor
Charger
Aerodynamic, light composite helmet's “slippery” boundary layer keeps it stable at high speeds. Chin bar slots, adjustable forehead vents, crown and rear exhaust vents provide comfort. Helmet meets Snell SA2005 specifications and is offered in white or black.
A unique wrap-around eye port gives a wide angle view. Helmet features Gray Matter helmet liner, for maximum comfort and safety. An adjustable chin bar and forehead, crown and rear vents offer comfort. Helmet meets Snell SA2005 specifications and is offered in silver, white or black.
Size
White
Black
Medium Large X-Large
IMP12000409 IMP12000509 IMP12000609
IMP12000410 IMP12000510 IMP12000610
Size
Silver
White
Black
Small Medium Large X-Large
IMP14000308 IMP14000408 IMP14000508 IMP14000608
IMP14000309 IMP14000409 IMP14000509 IMP14000609
IMP14000310 IMP14000410 IMP14000510 IMP14000610
Draft Ultra lightweight helmet has a “ripple effect” boundary layer and extended chin foil to aid aerodynamics. A variable density liner improves comfort. Helmet meets Snell SA2005 specifications and is offered in silver only. Size
Silver
Medium Large X-Large
IMP19200408 IMP19200508 IMP19200608
Mini Vapor And Mini Champ Designed for the continuously growing 5-10 year old racer. Lightweight, aerodynamic helmets have Quick Fit Inserts to provide room for growth all Mini Vapor Mini Champ the way to an adult size. Gray Matter helmet liner eases fitting and re-fitting. Approved by QMA, WKA, and IKF. Offered in silver only. Part No.
Champ The Champ’s radical chin bar covers the nose and mouth, acting as a breath deflector. Large eye port provides exceptional vision while, Gray Matter helmet liner, extended chin foil, adjustable forehead, crown and rear exhaust vents contribute to comfort. Meets Snell SA2005 specifications. Offered in silver, white or black. Size
Silver
White
Black
Small Medium Large X-Large
IMP13000308 IMP13000408 IMP13000508 IMP13000608
IMP13000309 IMP13000409 IMP13000509 IMP13000609
IMP13000310 IMP13000410 IMP13000510 IMP13000610
Description
IMP11300308 ........... Mini Vapor IMP11400308 ........... Mini Champ
Wizard Economically-priced full face helmet is designed specifically for the entry level racer. Manufactured in the USA from a lightweight composite, the Wizard includes an extra wide eyeport for exceptional vision. Meets Snell SA2005 specifications. White or flat black. Size
White
Flat Black
X-Small Small Medium Large X-Large
IMP14500209 IMP14500309 IMP14500409 IMP14500509 IMP14500609
IMP14500212 IMP14500312 IMP14500412 IMP14500512 IMP14500612
Helmet Dryer IMP10000009 Specialized dryer utilizes a single speed, low amp fan that removes moisture from helmet, improving comfort and eliminating odor.
Replacement Helmet Pivot Kit IMP10000000
NEW!
Breath Deflector IMP10000012 Fits in closed face helmets and helps prevent shield fogging.
NEW!
Replacement Helmet Shields Model
Clear
Light Smoke
Dark Smoke
Hi-Def. Amber
Iridium Yellow
Iridium Blue
Vapor/Charger/Draft Champ/Nitro Air Draft/Super Sport/Spider/Wizard Mini Vapor Mini Champ Lil' Champ
IMP12100901 IMP13100901 IMP19300901 IMP11300901 IMP11400901 IMP11100901
IMP12100902 IMP13100902 IMP19300902 IMP11300902 IMP11400902 IMP11100902
IMP12100903 IMP13100903 IMP19300903 IMP11300903 IMP11400903 IMP11100903
IMP12100904 IMP13100904 IMP19300904 – – –
IMP12100905 IMP13100905 IMP19300905 – – –
IMP12100906 IMP13100906 IMP19300906 – – –
2010
097-112OW10.indd 101
101
11/12/09 3:44:59 PM
Team One™
Quarter Midget Racing Suit
All the same high-quality features as the Racer (floating 360° sleeves, expandable lumbar gusset, boot cut leg cuff and inset front pockets), but with a higher-quality semigloss finish Nomex® outer shell. The Team One has the wrap-around collar and is only available in standard sizes, as a one-piece suit. The Team One suit will still fit any budget and keep looking good race after race. Team One suits have no logo and are available in blue, red or black. Each suit meets SFI 3-2A/5 specifications.
The Quarter Midget racing suit is constructed of a fire resistant shell fabric designed to allow for a growing racer. Meets SFI 3.2A/5 specifications. • 1-piece suit with plenty of extra seam allowance to let-out as the young racer grows • Fire resistant shell lined with a cool and comfortable liner • Built-in arm restraints • Adjustable waist belt • Vertical quilting and contrasting piping trim • Wide shoulders aids in movement • Inset pant pocket • Ribbed wrist and ankle cuffs • Tapered collar for comfort when wearing helmet and neck support
Color
Medium
Large
X-Large
One-Piece Suits Blue IMP21000406 IMP21000506 IMP21000606 Red IMP21000407 IMP21000507 IMP21000607 Black IMP21000410 IMP21000510 IMP21000610
XX-Large
IMP21000706 IMP21000707 IMP21000710
Medium
Large
X Large
One Piece - Double Layer, Black - Youth Size Only IMP21400410 IMP21400510 IMP21400610 Adult And Youth Suit Measurements
The Racer
Size
Impact’s Racer™ offers the best value in American-made racing suits. The Racer may be moderately priced but it’s not modest on features or quality. Hand made to exacting standards by the same hands that build Impact custom firesuits, this suit is what the budget minded racer needs. The Racer is made of a MatteFinish Futura Nomex® and is standard with all of those options that cost extra somewhere else. The Racer also comes standard with the ImpactMAX cool and comfortable fire resistant liner, box quilting, a wide athletic shoulder silhouette, inset front pants pockets, a banded collar and adjustable hook and loop fastened belt. Available in one-piece, black only. Meets SFI 3-2A/5 Specifications. Small
Medium
Large
Adult Small Medium Large X-Large XX-Large Youth Medium Large X-Large
X Large
XX Large
Custom Firesuits NEW! Impact’s custom firesuits are made in the USA and are the culmination of Bill Simpson’s 50 years of race safety experience and continual research and development. Handcrafted of the finest Nomex® materials imported from Europe, the full-custom suit is tailored to fit perfectly. With 16 colors to choose from, a custom suit can be made in one of Impact's standard styles or a racer's custom design and can be embroidered with all of your sponsor and series logos as needed. Impact's suits are SFI and FIA certified and can be rated at SFI 5. Bill Simpson introduced the Nomex® firesuit to racing in 1963 and has been improving the design, function and safety ever since. One Piece Suit IMP26000 IMP27200
102
Weight
Chest
Waist
Hips
Torso Neck Inseam
5'5" to 5'7" 5'7" to 5'9" 5'9" to 5'11" 5'11" to 6'1" 6'1" to 6'3"
140 to 160 160 to 180 180 to 200 200 to 220 220 to 250
37-39 41-43 45-47 49-51 53-55
31-33 35-37 39-41 43-45 47-49
37-39 41-43 45-47 49-51 53-55
63 65 68 71 72
15 16 17 18 20
31 31 32 33 33
4'4" to 5'0" 4'11" to 5'3" 5'2" to 5'6"
70 to 90 85 to 100 95 to 110
27-29 26-28 26-28 31-33 28-30 30-32 33-35 29-31 31-33
48 53 58
12 13 14
25 27 28
G2/G3 Evolution Racing Gloves NEW!
One-Piece Suits IMP24200310 IMP24200410 IMP24200510 IMP24200610 IMP24200710
Part No.
Height
Standard gauntlet and cuff, comfortable suede gloves have an adjustable quick fit wrist closure and padded palm. G2 gloves add a padded, wrap around palm template for added comfort and abrasion resistance. Available in black/grey only. Size
G2 Part No.
G3 Part No.
Small Medium Large X-Large
IMP32000310 IMP32000410 IMP32000510 IMP32000610
IMP33000310 IMP33000410 IMP33000510 IMP33000610
JG4™ The junior version of the G4 driving glove offers the same features as its larger counterpart including an extra layer of fire-resistant material between the outer leather and the palm. Sized specifically for young hands for unprecedented feel and comfort. Meets SFI 3.3/5 specifications. Part No.
Suit Type
SFI Rating
TPP Rating
1-Piece / 2-Layer 1-Piece / 3-Layer
SFI-5/FIA SFI-5
Over TPP 19 Over TPP 28
Description
IMP38000311 ........ JG4 Youth Glove, Small IMP38000411 ........ JG4 Youth Glove, Medium IMP38000511 ........ JG4 Youth Glove, Large
2010
097-112OW10.indd 102
11/10/09 9:34:36 AM
Wizard 5- And 6-Point Harness Systems NEW!
Helmet And Gear Bags Black nylon bags bear the Impact Racing logo and are available in two sizes. Extra large Gear Bag is 27" long x 12" wide x 11" deep with adjustable shoulder straps.
Affordable, U.S.- made harness systems include an integrated, pull-down adjustable 3" wide lap belt, shoulder straps and are available with single (5-point) or double (6-point) 1-3/4" wide submarine belt. Offered in gray only, all harnesses are SFI 16.1 certified. Part No.
Part No.
Description
Individual Shoulder Sets IMP59911111 ........... 5-Point Pull Down Adjust Restraint System IMP59921111 ........... 6-Point Pull Down Adjust Restraint System
Helmet Support IMP74500010 High density foam Support increases in resistance the more it is compressed. Available in black only, support has an adjustable hook and loop closure. Meets SFI specifications.
5- And 6- Point Latch And Link Systems Each latch and link restraint system includes individual shoulder harness, latch and link lap belts and single (5-point) anti-sub belt. SFI 16.1 certified. Part No.
Arm Restraints IMP75000910 NEW! Padded arm bands with webbed leashes and two adjustments for both arm circumference and leash length. Meets SFI requirements.
Description
Individual Shoulder Sets IMP51111111 ........... 5- Point Pull Down Adjust Restraint System IMP52111111 ........... 5- Point Pull Up Adjust Restraint System
H/T Racing Shoes
5-Point Rotary Cam Lock Systems
Offered in H/T (High Top) version, Impact Racing Shoes deliver unsurpassed comfort and support with plush knit, fire resistant interior and a velour suede exterior. Aggressive sole design provides exceptional pedal feel and dual lacing system assures excellent fit. Available in black only.
Each 5-point rotary cam lock system has individual shoulder harnesses, rotary cam lock lap belts and single anti-sub belt. SFI 16.1 certified. Individual Shoulder Sets Part No.
Description
IMP55341111 ........... Pull Down Adjust Restraint System IMP56341111 ........... Pull Up Adjust Restraint System
Part No.
Size
Part No.
IMP48007010 ........ 7 IMP48008010 ........ 8 IMP48009010 ........ 9 IMP48009510 ........ 9-1/2 IMP48010010 ........ 10
Anchor Hardware Part No.
Description
IMP71000910 ........... Helmet Bag IMP72000910 ........... Gear Bag
Size
IMP48010510 .......10-1/2 IMP48011010 .......11 IMP48011510 .......11-1/2 IMP48012010 .......12 IMP48013010 .......13
Description
IMP50000011 ........... 3-Bar Adjuster IMP50000021 ........... Bolt-In Anchor
IMP50000011
Tire Grooving Iron IHK125 The pistol grip is light and stays cool. The solid brass head keeps the heat “just ahead” of the cutting blade to quickly groove dirt track tires. Cut depth is controlled by the adjustable blade. Iron has a 250 watt capacity, and includes .215" wide brass #4 head, twelve #4 blades and 7-foot power cord.
IMP50000021
Replacement Round Blades
Replacement Heads
Part No.
Part No.
Description
IHKBL02 .......#2 Blades (12) IHKBL03 .......#3 Blades (12) IHKBL04 .......#4 Blades (12) IHKBL05 .......#5 Blades (12) IHKBL06 .......#6 Blades (12) IHKBL08 .......#8 Blades (12) IHKBL10 .......#10 Blades (12) IHKBL12 .......#12 Blades (12)
Siping Heads For use with Ideal IHK 125 grooving iron, heads have spacers to convert grooving iron to a 4-blade siping tool.
2010
097-112OW10.indd 103
Description
IHKHD01 .......#1 Head .053" Wide IHKHD02 .......#2 Head .090" Wide IHKHD03 .......#3 Head .150" Wide IHKHD04 .......#4 Head .215" Wide IHKHD05 .......#5 Head .290" Wide IHKHD06 .......#6 Head .375" Wide IHKHD08 .......#8 Head .500" Wide IHKHD10 .......#10 Head .625" Wide IHKHD12 .......#12 Head .750" Wide
See Page 12 For Details
103
11/10/09 9:34:53 AM
Professional Wireless Scale System INT170127-W NEW! RFX wireless system is certified to 0.1% accuracy, offering a secure, wireless connection with USB and RS232 output. Large, 1/2" backlit display characters are easily read. System has a target tune feature and can store 100 chassis set-ups, recall baseline set-up, calculate center of gravity and display user selectable modes. Four wireless, RFX billet 15" x 15" x 2-1/2", 1,500 lb. pads, one touch wireless indicator with case, pad storage case, USB cable for PC, race car management software and AA alkaline batteries are included. Twoyear warranty.
Scale System Carrying Case INT100055-R NEW! Heavy duty, ATA300 approved carrying case is designed to store four 2-1/2" tall, low profile scale pads, control box and cables. Case, which is 21" x 17-1/2" x 21", features mil-spec latches and handles.
Scale Cart INT100346 A high quality aluminum scale cart complete with wheels. Cart holds four pads, cables, controller and has space for accessories.
Quick Weigh Wireless Scale System INT170126-W NEW! Quick Weigh's integrated RFX wireless technology assures 0.1% accuracy and secure wireless communication. System has large, 1/2" backlit display characters, USB and RS232 output, and can store 100 chassis set-ups, recall baseline set-up, calculate center of gravity, display user selectable modes, and target tuning. Includes four wireless, RFX billet, 15" x 15" x 2-1/2", 1,500 lb. pads, one touch wireless indicator with case, AA alkaline batteries and a two-year warranty.
E-Z Weigh Cabled Scale System INT170125 Intercomp's best selling scale system. Cabled E-Z Weigh Scale System uses large, easy-to-read display of weights and percentages, and is certified to 0.1% accuracy. Unit has a target tune feature and can display set-ups to one hundredth of a percent, store 100 chassis set-ups, recall baseline setup, calculate center of gravity and display user selectable modes. Includes cabled indicator with case, four billet 15" x 15" x 2-1/2", 1,500 lb. capacity scale pads, 9-volt rechargeable battery and two-year warranty.
SW787 Wireless Scale System INT170154 NEW! Intercomp's wireless SW787 scale system combines the ultra accurate (.01% accuracy) billet scale pads with advanced RFX wireless technology. Custom displays for oval track, dirt track (with rear bite) and four corners. System includes handheld PDA and (4) billet 15" x 15" x 2-1/2", 1,500 lb. capacity scale pads with wireless modes to transmit data from the pads to the handheld PDA.
104
Digital Air Pressure Gauge INT360045 Rapid, highly accurate, backlit digital gauge has 0.5" display, and reads in 0-100 PSI (0.1 increments). Keypad calibration, push button zero, peak hold function, thumb operated bleed off, and 20" whip hose with 45째 swivel nozzle included.
Deluxe Air Pressure Gauges Deluxe Air Gauges incorporate a patented internal mechanism which provides far more resilience to extreme punishment. Available in standard, glow-in-the-dark or liquid-filled, every unit includes a high quality thumb-operated bleeder and swivel nozzle on a 17" Goodyear hose. High visibility with major/minor graduation marks. Part No.
Description
INT360058 ........4", Glow In Dark, 0-15 x 1/2 PSI NEW! INT360059 ........4", Glow In Dark, 0-30 x 1 PSI NEW! INT360062 ........2", 0-15 x 1/2 PSI INT360063 ........2", 0-30 x 1 PSI INT360065 ........2.5", Liquid-Filled, 0-15 x 1/2 PSI INT360066 ........2.5", Liquid-Filled, 0-30 x 1 PSI INT360068 ........2.5", Glow In Dark, 0-15 x 1/2 PSI INT360069 ........2.5", Glow In Dark, 0-30 x 1 PSI
INT360062
Tire Durometer INT360092 Type-A hardness tester allows quickly checking tire compound. Gauge reads 0-100.
Memory Tire Pressure Gauge INT102058 Advanced tire pressure monitoring system features dual, digital backlit display of all pressures including OUT/COLD, IN/HOT and calculates GAIN, while compensating for changes in barometric pressure. Memory allows storing up to ten complete sets of pressures. Unit includes a standard RS232 output and operates on a standard, 9-volt battery. May be interfaced with #INT102065-R Race Car Management Software.
2010
097-112OW10.indd 104
11/12/09 12:27:04 PM
Test Equipment
Lap Timer System INT360050
Intercomp is the world leader in high performance test equipment with components to meet the needs of every racer.
INT360018-E .....Infrared Temp Gun w/Case (-58° to 1,022°F) INT360084-E .....Mini Infrared Laser Temp Gun (-22° to 518°F)
Lightweight, compact and easy-to-use, lap timer features single button operation. Unit indicates lap number every lap, while 250-lap memory stores laps cumulatively up to one hour in length for later recall. Backlit display allows easy viewing in daylight, overcast or night time conditions. Serial output allows sending lap times to a printer, computer or data logger. Requires no hard wiring and installs easily with Velcro strips. Powered by a standard, 9-volt battery.
Coil Spring Tester INT100059
Shock Dynamometer INT102062-S
Infrared Pyrometers Infrared Pyrometers provide quick temperature readings. Point, and squeeze trigger to check temperatures of rotors, tires, fluids, etc. Part No.
Description
• Digital Height/Force Readout • 5,000 lb. Capacity • Portable
Valve Spring Tester INT100058
Compare and evaluate shock absorbers easily. The dual display unit is adjustable for 1.0", 1.5", 2.00" or 2.25" strokes and shows compression, rebound, speed, time and temperature. Fixed speed motor unit is compatible with Windows 98, NT, 2000 and XP. Software is included.
• Digital Height/Force Readout • 1,000 lb. Capacity
Steel Valve Spring Retainers 4130 chrome moly steel retainers are ideal for most oval track applications. Sold in sets of 16.
Valve Locks Locks are machined from 4140 chrome moly bar stock and heat treated. Available in 7° and 10° styles. The “Super 7°” locks have a precisely ground outside diameter to provide a more consistent installed height and are engineered for endurance oval track applications. Sold in sets of 16 (32 pieces). Part No.
Description
7° Valve Locks ISKVL-11/32 ......For 11/32" Valve Stems, SB Chevy, SB Ford 10° Valve Locks ISKVL10-11/32 ..For 11/32" Valve Stems, SB Chevy, SB Ford “Super 7°” Valve Locks ISKVL-700 .........For 11/32" Valve Stems, SB Chevy, SB Ford ISKVL-750 .........For 11/32" Valve Stems, +.050" Higher Installed Height, SB Chevy, SB Ford
Part No.
Spring Application
ISK275-ST .........9315, 9365, 9365-SP, 9365, 9385, 9965, 9975, 9985, 9995 ISK507-ST .........6005, 6105, 2605 ISK507-STA .......6205, 8005-A ISK707-ST .........205-D ISK707-STA .......235-D, 295-D
Titanium Valve Spring Retainers Retainers are 20-40% stronger and significantly lighter than common steel retainers. Manufactured from 100% aircraft quality titanium bar stock. Sold in sets of 16. Part No.
Description
ISK90-TI/10DEG........ 10° Retainers, Use With 10° Valve Locks and Springs 8005-A, 8205, 8305, 9205, 9315, 9365, 9365-SP, 9385, 9965, 9975, 9985 and 9995. ISK91-TI ................... 7° Retainers, Use With Springs 8005-A, 8205, 8305, 9000, 9205, 9315, 9365, 9365-SP and 9385.
Endurance Plus Mechanical Roller Lifters Isky Endurance Plus Roller Lifters feature TruTrac needle roller bearings, a non-skid textured surface, premium 4340 steel pins, and “parabolic” profile, crowned outer bearing races for long, trouble-free life. Sold in sets of 16. Part No.
Description
ISK1241-LO-150 ...... SB Chevrolet 262-400, .150" Offset, Steel Body w/Alum. Top ISK1241-LO-185 ...... SB Chevrolet 262-400, .185" Offset, Steel Body w/Alum. Top ISK1241-LSH ............ SB Chevrolet 262-400, Centerline, Steel Body w/Alum. Top
Jeff Banyas
Photo: Randy Ellen
2010
097-112OW10.indd 105
105
11/10/09 9:36:00 AM
Endurance 9000 Series Valve Springs High Endurance™ Valve Springs Test proven for 700 racing miles, Isky High Endurance Valve Springs are wound from “super clean” chrome silicone wire. Perfect for late models, modifieds and other race cars running up to 8000 RPM. Sold in sets of 16. Part No.
Type
Color Code
Outer O.D./I.D.
Inner O.D./I.D.
ISK8205-SP ISK9315 ISK9365 ISK9365-SP ISK9385
Dual w/Damper Dual w/Damper Dual w/Damper Dual w/Damper Dual w/Damper
Natural Red Green Green Yellow
1.530"/1.110" 1.550"/1.025" 1.550"/1.135" 1.550"/1.135" 1.560"/1.040"
.730"/1.005" .740"/1.035" .740"/1.035" .740"/1.035" .740"/1.145"
Seat Pressure
Open Pressure
150 @ 1.900" 440 @ 1.300" 210 @ 1.900" 520 @ 1.240" 220 @ 1.950" 550 @ 1.270" 225 @1.950" 550 @1.270" 240 @2.000" 600 @1.250"
Rate Per In.
Coil Bind
Max Net Lift
480 480 460 460 500
1.150" 1.130" 1.170" 1.170" 1.180"
.650" .660" .680" .680" .720"
Endurance Plus™ Valve Springs Test proven for 850 racing miles, Endurance Plus Springs feature a higher alloy outer spring “plus” special processing for increased durability. Excellent for use in sprint cars, super modifieds, super late models, road racing and other race cars running up to 8400 RPM. Sold in sets of 16. Part No.
ISK8005PLUS ISK8205PLUS ISK9365PLUS ISK9375PLUS ISK9385PLUS
Type
Color Code
Dual w/Damper – Dual w/Damper – Dual w/Damper Green/Silver Or. Dual w/Damper Nat./Silver/Or. Dual w/Damper Nat./Silver/Red
Outer O.D./I.D.
Inner O.D./I.D.
Seat Pressure
Open Pressure
Rate Per In.
Coil Bind
Max Net Lift
1.530"/1.110" 1.530"/1.110" 1.560"/1.040" 1.560"/1.040" 1.560"/1.040"
1.005"/.730" 1.005"/.730" 1.145"/.740" 1.145"/.740" 1.145"/.740"
140 @ 1.875" 150 @ 1.900" 235 @ 1.950" 230 @ 1.970" 245 @ 2.000"
400 @ 1.275" 420 @ 1.300" 560 @ 1.270" 560 @ 1.290" 600 @ 1.280"
420 440 470 480 500
1.160" 1.120" 1.170" 1.190" 1.180"
.650" .650" .680" .680" .720"
Precision Tool Room™ Valve Springs Test proven for 1000 racing miles, Isky Precision Tool Room Valve Springs feature the highest quality alloy wire and trade secret endurance processing. Great for super modifieds, ARCA, Busch GN, Craftsman Truck, Nextel Cup, and applications up to 8800 RPM. Sold in sets of 16. Part No.
Type
Color Code
Outer O.D./I.D.
Inner O.D./I.D.
Seat Pressure
Open Pressure
Rate Per In.
Coil Bind
Max Net Lift
ISK295-D ISK9905 ISK9945 ISK9935 ISK9965 ISK9975 ISK9985 ISK9995
Single w/Damper Dual w/Damper Dual w/Damper Dual Damperless Dual w/Damper Dual w/Damper Dual w/Damper Dual w/Damper
– Gold Gold Gold Gold Gold Gold Gold
1.260"/.886" 1.534"/1.120" 1.625"/1.175" 1.560"/1.155" 1.560"/1.145" 1.560"/1.145" 1.560"/1.145" 1.570"/1.145"
– 1.010"/.740" 1.065"/.770" 1.153"/.820" 1.040"/.740" 1.040"/.740" 1.040"/.740" 1.035"/.740"
135 @ 1.775" 165 @ 1.900" 250 @ 2.020" 245 @ 1.950" 245 @ 1.950" 245 @ 1.970" 245 @ 2.000" 250 @ 2.030"
350 @ 1.175" 450 @ 1.300" 675 @ 1.270" 590 @ 1.250" 585 @ 1.270" 585 @ 1.290" 600 @ 1.300" 625 @ 1.300"
360 475 550 490 470 480 500 510
1.100" 1.160" 1.180" 1.150" 1.170" 1.190" 1.200" 1.200"
.600" .600" .750" .700" .680" .680" .700" .730"
RAD-9000 Precision Tool Room Valve Springs Isky RAD-9000 Precision Tool Room Valve Spring taken one step further. Springs have undergone Radial-Densification (RAD), which further modifies the springs' physical properties. Designed for endurance oval track racing, RAD9000 springs are sold in sets of 16. Part No.
Type
Outer O.D./I.D.
Inner O.D./I.D.
Seat Pressure
Open Pressure
Rate Per In.
Coil Bind
Max. Net Lift
ISK9945-RAD ISK9955-RAD ISK9985-RAD ISK9995-RAD ISK9998-RAD
Dual w/Damper Dual w/Damper Dual w/Damper Dual w/Damper Dual w/Damper
1.625"/1.175" 1.625"/1.175" 1.650"/1.145" 1.570"/1.145" 1.600"/1.150"
1.065"/.770" 1.065"/.770" 1.040"/.740" 1.040"/.740" 1.040"/.745"
250 @ 2.020" 265 @ 2.120" 245 @ 2.000" 250 @ 2.030" 250 @ 2.050"
675 @ 1.270" 700 @ 1.320" 600 @ 1.300" 625 @ 1.300" 735 @ 1.250"
550 545 500 510 600
1.180" 1.240" 1.200" 1.200" 1.160"
.750" .800" .700" .730" .800"
106
2010
097-112OW10.indd 106
11/12/09 12:27:45 PM
SFI-Approved Roll Bar Padding Adhesive backed roll bar padding easily attaches to roll bar tubing and meets SFI 45.1 specifications. Available in 3 ft. lengths. Description
Black Part No.
Red Part No.
Blue Part No.
1/2" Thick Roll Bar Padding JAZ690-003-01 JAZ690-003-06 JAZ690-003-11 5/8" Thick Roll Bar Padding JAZ690-007-01 – –
Valve Train Trays
16" triangular funnel is similar to the standard funnel, but with a larger capacity and a tapered spout for different flow rates. 22" long. Accepts filter JAZ500-000-01.
Description
JAZ735-001-06 ........ Valve Spring Tray JAZ735-002-06 ........ Rocker Arm Tray
Go Deep JAZ560-014-06 NEW!
Engine Stand Drip Tray JAZ720-000-01
Ideal for automatic transmissions, 7" x 14" funnel has a built-in handle, anti-splash ring and 30" long, tapered spout. Accepts filter JAZ500000-01.
Fits most three- and four-legged engine stands, sturdy drip tray has a deep sump to catch oil and debris. Promotes safety in the workshop and keeps the shop/garage floor much neater. Also handy for retrieving dropped fasteners and small parts.
Filter Insert JAZ500-000-01
Fuel Cell Tip Over Valve NEW!
60-micron stainless steel screen is easily removed for cleaning. Oring is set into a molded-in groove to provide a tight seal. Fits above funnels.
Prevents fuel spillage in the event of a roll over. Part No.
14" triangular shape allows easy filling against a bulkhead. 3-step spout may be cut off for different rates of flow. 17" long. Accepts filter JAZ500-000-01.
Large Triangular JAZ550-016-06
Valve spring tray holds springs, valve locks and will accept the largest valves available. Rocker arm tray holds pushrods, lifters, poly locks, spark plugs and rocker arms. Part No.
Fuel Funnels Standard Triangular JAZ550-014-06
Description
JAZ834-006-11 ........ -6AN Tip Over Valve JAZ834-008-11 ........ -8AN Tip Over Valve
15 Gallon Utility Jug JAZ710-015-05
Fast Flow Fuel Cell Fittings NEW! Fully radiused, Fast Flow Fuel Cell Fittings include bulkhead nuts and poly washers. Poly washers are also available separately. Size
Fuel Cell Fitting Part No.
Poly Washer Part No.
-6AN -8AN -10AN -12AN -16AN
JAZ832-106-11 JAZ832-108-11 JAZ832-110-11 JAZ832-112-11 JAZ832-116-11
JAZ850-506-04 JAZ850-508-04 JAZ850-510-04 JAZ850-512-04 JAZ850-516-04
15 gallon jug is 30" tall x 13" wide with a large, 83mm outlet for fast pouring, and an O-ring seal cap.
NEW! JAZ832-106-11
SB Chevy 350/400 23° Dome NEW VENDOR
Pro Seal Premium Race Series Piston Rings A full selection of premium Pro Seal piston rings are listed by bore size. Top compression rings are barrel faced ductile iron with a plasma moly coating. Second rings are taper face cast iron with a phosphate coating. Standard or low tension oil rings are chrome plated carbon steel. Part No.
Bore Size
Type
Top Ring
JEPJ100F8-4030-5 JEPJ10008-4030-5* JEPJ70008-4030-5* JEPJ100F8-4040-5 JEPJ70008-4040-5* JEPJ10008-4040-5* JEPJ100F8-4060-5 JEPJ10008-4060-5* JEPJ70008-4060-5* JEPJ100F8-4125-5 JEPJ10008-4125-5* JEPJ10008-4145-5* JEPJ100F8-4155-5 JEPJ10008-4155-5* *Low tension oil rings.
4.030" 4.030" 4.030" 4.040" 4.040" 4.040" 4.060" 4.060" 4.060" 4.125" 4.125" 4.145" 4.155" 4.155"
Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly Plasma-Moly
1/16" 1/16" .043" 1/16" .043" 1/16" 1/16" 1/16" .043" 1/16" 1/16" 1/16" 1/16" 1/16"
097-112OW10.indd 107
2nd Ring Oil Ring
1/16" 1/16" .043" 1/16" .043" 1/16" 1/16" 1/16" .043" 1/16" 1/16" 1/16" 1/16" 1/16"
3/16" 3/16" 3mm 3/16" 3mm 3/16" 3/16" 3/16" 3mm 3/16" 3/16" 3/16" 3/16" 3/16"
High compression pistons are compatible with most stock, aftermarket, and angle milled cylinder heads. Valve reliefs accommodate oversized valves and high lift cams. Requires 1/16" top, 1/16" second and 3/16" oil rings. Sold in sets of eight and include .927" x 2.750" (130 grams) wrist pins and double spiral locks. Part No.
350 Pistons JEP182005 JEP182012 JEP182014 400 Pistons JEP182024 JEP182027 JEP182028 JEP182032 JEP182036 JEP182037 JEP182038 JEP182041 JEP182042 JEP182053 JEP182058 JEP182061 JEP182067 JEP182069 JEP207513
Bore
Stroke
Rod Length
Comp. Ratio
Dome Volume
4.030" 4.030" 4.040"
3.750" 3.500" 3.500"
6.000" 6.000" 6.000"
13.3 13.1:1 13.2:1
+9.5 cc +13 cc +13cc
4.125" 4.155" 4.165" 4.165" 4.155" 4.165" 4.125" 4.155" 4.165" 4.125" 4.125" 4.155" 4.125" 4.155" 4.185"
4.000" 4.000" 4.000" 4.000" 3.875" 3.875" 3.875" 3.875" 3.875" 3.750" 3.750" 3.750" 3.500" 3.500" 4.000"
6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000" 6.000"
13.4:1 13.5:1 13.7:1 14.6:1 13.2:1 13.3:1 14.:1 14.1:1 14.2 12.7:1 13.6:1 13.7:1 13.8:1 13.8:1 14.8:1
+3 cc +3 cc +3cc +8cc +3 cc +3cc +8 cc +8 cc +8 cc +3 cc +8cc +8 cc +13cc +13cc +8cc
Notes: Compression ratios are based on a 64cc combustion chamber. All of the 350 pistons fit both 3.480" and 3.500" strokes. 2010 107
11/10/09 9:36:32 AM
XPO Synthetic Racing Oil Ultra-low viscosity racing oil is formulated for qualifying, where maximum performance is required. Oil has a viscosity typical of SAE 0W. Ideal for qualifying. Description 1 Quart Bottle Part No.
XP0
5 Gallon Pail Part No.
JGP00406
JGP00417
XP1 Synthetic Racing Oil XP1 Synthetic Racing Oil has a viscosity typical of SAE 5W-20. Ideal for GM Crate Motors or other engines where bearing clearances are less than .0025". Description
1 Quart Bottle Part No.
XP1
JGP00006
(12) 1 Qt. Bottles 2.5 Gallon Pail Part No. Part No.
JGP00007
JGP00014
XP2 Synthetic Racing Oil Joe Gibbs Racing XP2 Racing Oil is engineered for high RPM racing engines with bearing clearances under .002", oil has a viscosity typical of SAE 0W-20. Description
1 Quart Bottle Part No.
XP2
JGP00206
(12) 1 Qt. Bottles 5 Gallon Pail Part No. Part No.
JGP00207
JGP00217
XP3 Synthetic Racing Oil Similar to XP1 with a higher viscosity, typical of SAE10W-30, for improved high temperature/high shear protection. Formulated for aluminum blocks and all engines with bearing clearances greater than .0025". Description
1 Quart Bottle (12) 1 Qt. Bottles 2.5 Gallon Pail Part No. Part No. Part No.
XP3
JGP00306
JGP00307
JGP00314
XP7 Semi-Synthetic Racing Oil JGP01706 NEW! Combines the performance of XP3 with the economical price of XP5. Viscosity is typical of SAE 15W-40 and is suited to Late Models, Modifieds, GM Crate engines and NASCAR spec. engines. Sold in 1 quart bottles.
BR Break-In Oil Petroleum-based oil has superior break-in properties, particularly in flat tappet engines. Lubricant promotes ring seal and protects camshaft and lifters with the highest levels of zinc and phosphorus. Offered in BR50 (SAE15W-50) and BR30 (SAE 10W-30) formulas. Description
1 Quart Bottle Part No.
(12) 1 Qt. Bottles Part No.
5 Gallon Pail Part No.
BR50 BR30
JGP00106 JGP01806
JGP00107 –
JGP00117 –
Engine Assembly Grease Unparalleled engine protection during initial start-up when combined with BR oil. Description
1 Lb. Tub Part No.
1 Oz. Tube Part No.
Assembly Grease
JGP00728
JGP00732
Synthetic Gear Oil Formulated for differentials and manual transmissions, Synthetic Performance Gear Oil reduces operating temps by up to 15°F. Offered in 75W-100 and Super Speedway 80W. Description
XP4 Performance Racing Oil Petroleum-based lubricant is a low cost alternative to synthetic race oils. Viscosity is typical of SAE 15W-50 and is ideal for racers who change oil after every race. Works well in engines with clearances in excess of .0025". Description
1 Quart Bottle Part No.
(12) 1 Qt. Bottles Part No.
XP4
JGP00506
JGP00507
XP5 Semi-Synthetic Racing Oil A semi-synthetic lubricant offers the added benefits of high temperature shear protection and oxidation stability without the high cost of a synthetic. Viscosity is typical of SAE 20W-50. Description
1 Quart Bottle Part No.
(12) 1 Qt. Bottles Part No.
XP5
JGP00906
JGP00907
Synthetic Gear Oil Super Speedway Gear Oil Qualifying Gear Oil
1 Quart Bottle Part No.
(12) 1 Qt. Bottles Part No.
5 Gallon Pail Part No.
JGP00630 JGP00830
JGP00631 JGP00831
–
–
JGP00617 JGP00817 JGP01117
Power Steering Fluid JGP01306 NEW! A full synthetic formula with exceptional high temperature foam resistance. Description
1 Quart Bottle Part No.
(12) 1 Qt. Bottles Part No.
Power Steering Fluid
JGP01306
JGP01307
Automotive Degreaser JGP50010 Degreases parts and shop equipment. 18 oz. can.
XP6 Synthetic Racing Oil A full synthetic, 15W-50 version of race proven XP1. Oil provides outstanding cold start protection and superior bearing oil film thickness. Designed for aluminum blocks or applications with looser clearances, oil has a viscosity typical of SAE 15W-50. Description
1 Quart Bottle Part No.
(12) 1 Qt. Bottles Part No.
XP6
JGP01006
JGP01007
108
Brake And Parts Cleaner JGP50020 Cleans quickly, dries quickly and leaves no residue. 18 oz. can.
2010
097-112OW10.indd 108
11/10/09 9:36:56 AM
Fuel Filler Top Plates NEW!
JOE13275
Part No.
Professional Infra Red Pyrometers Has a rubberized surface which feels great in your hand. Rubber corners soften impacts. Laser guided accuracy works great up to 1472° F. Measures header temps, brake temps as well as tire and track temps. Use the Data Hold feature to record for camber adjustments. Record the standard 3 temps per tire or record 5 temps per tire for extra precision.
Perfect for your mini sprint, sprint car or any application where you need a top plate for your fuel tank. Cap area features a raised ridge to keep dirt out of your fuel system. A high flow roll over vent is included. The oversize vent system ensures that your fuel system gets enough air to prevent vapor lock and is designed to meet the fuel needs of your high fuel consumption alcohol motor. Add a nut ring to use the top plate on nearly any tank or bolt it directly on your existing fuel cell bladder.
Part No.
JOE13276
Description
JOE55010..........IR Pyrometer Soft Grip Compact, 732° F. JOE55015..........IR Memory Pyrometer Soft Grip, 1400° F. Also Available: JOE56100..........Digital Tread Depth Gauge
JOE55015
NEW!
Description
JOE13275..........Fuel Top Plate JOE13276..........Fuel Filler Nut Plate JOE13290..........#10 AN Roll Over Valve
Lightweight Steering Wheels
Mini Sprint Billet Rear Hubs, Carriers, And Rotors NEW!
Aluminum, 2-1/2" dish steering wheels are drilled for lightness and shot peened to enhance grip. Part No.
Description
JOE13515-A ......15" Dished LW Steering Wheel JOE13535-A ......15" Flat LW Steering Wheel JOE13535-B ......15" Flat LW Steering Wheel, Black JOE13600..........Steering Wheel Tape JOE13650..........Steering Wheel Pad
JOE13535-B
Aluminum Weld Fittings/Bungs Are machined to exact tolerances: male fittings are AN sizes and the female bungs are NPT sizes. Ideal for welding to valve covers, dry sump tanks, breather tanks, etc. Sold individually. Male AN Weld Fittings Female NPT Weld Bungs JOE25615
JOE25685
JOE25790
Hubs have JOES quality machined finish, anodized and laser etched for a durable finish. Each edge is fully radiused for a lightweight package. JOES Mini Sprint hubs are thick where you need it and thin where you don’t, creating a hub that is strong and light. JOES rear hubs are precision broached, so they run true on your axle creating consistent speed lap after lap. Sprocket and brake rotor carriers as well as brake rotors are also available to complete a high-quality rear brake/hub combination. Part No.
Hubs have JOES quality machined finish, anodized and laser etched for a durable finish. JOES Mini Sprint hubs are thick where you need it and thin where you don’t, creating a hub that is strong and light. JOES Billet hubs are the perfect addition to your Mini Sprint. Description
Coil-Over Spanner Wrenches Billet aluminum wrenches prevent knuckle injuries when adjusting coil-overs. Part No.
Description
JOE33000..........Long JOE33500..........Short
Part No.
NEW!
Description
JOE19200..........Shock Workstation JOE19250..........Shock Workstation, Base Only JOE19075..........Shock Wrench, Allows Penske Shock Disassembly/Assembly JOE19300..........Drip Cup, Catches Shock Oil When Rebuilding
Liquid Filled GID Tire Pressure Gauges The liquid filled gauge with glow-in-the-dark dial gives professionals the accurate readings they need to win more races. Part No.
NEW!
Description
JOE32330..........Precision 4" Liquid Tire Pressure Gauge GID, 0-30 PSI JOE32331..........Precision 4" Liquid Tire Pressure Gauge GID, 0-60 PSI
Glow-In-The-Dark Tire Pressure Gauges Perform tire pressure adjustments, even in dark pit areas. Gauges are 2-1/4" diameter, include 17" ultra-flexible hose with swivel chuck and air pressure release button. Part No.
NEW!
Description
JOE32305..........0-15 PSI JOE32306..........0-30 PSI
2010
097-112OW10.indd 109
Description
JOE37102..........1/8" NPT JOE37104..........1/4" NPT JOE37106..........3/8" NPT JOE37108..........1/2" NPT JOE37110..........3/4" NPT JOE37112..........1" NPT
Shock Workstation
Part No.
Mini Sprint Billet Front Hubs
JOE25605..........Mini Sprint LF Hub With Rotor Mount JOE25610..........Mini Sprint RF Hub
Description
JOE37006..........-6AN JOE37008..........-8AN JOE37010..........-10AN JOE37012..........-12AN JOE37016..........-16AN JOE37020..........-20AN
Secures body and shaft of a shock absorber to allow easier servicing. May be used in a vise or mounted permanently to a work bench or pit cart with the optional base.
Description
JOE25615..........Mini Sprint Rear Hub JOE25675..........Mini Sprint Sprocket Carrier JOE25685..........Mini Sprint Brake Rotor Carrier JOE25790..........Mini Sprint Front Brake Rotor JOE25795..........Mini Sprint Rear Brake Rotor
Part No.
Part No.
109
11/12/09 11:59:44 AM
NEW VENDOR
Forged Billet H-Beam Connecting Rods
Forged Steel Crankshafts
Forged series 4340 steel connecting rods are core hardened to increase tensile strength and mag-particle inspected. Rods are fitted with ARP fasteners and finish honed. Center-to-center dimensions are held within +/-.001" and journals are honed to +/-.0001". All rods listed below are bushed for full floating wrist pins. Offered with choice of standard 3640 or premium ARP 2000 fasteners. Sold in sets of eight.
Crankshafts are constructed from 4340 steel and undergo core hardening for added durability and mag-particle inspection for superior quality control.
Part No.
Description
Housing Bore
K1TCH5700ALLB8A K1TCH5700ALLB8S K1TCH5850ALLB8S K1TCH6000ALLB8A K1TCH6000ALLB8S K1TCH6125ALLB8A K1TCH6125ALLB8S K1TCH6250ALLB8S K1TFH5400ALLB8S
SB Chevy 5.700" SB Chevy 5.700" SB Chevy 5.850" SB Chevy 6.000" SB Chevy 6.000" SB Chevy 6.125" SB Chevy 6.125" SB Chevy 6.250" SB Ford 5.400"
2.225" 2.225" 2.225" 2.225" 2.225" 2.225" 2.225" 2.225" 2.225"
Shaft Dia.
Wrist Pin Dia.
2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100"
.927" 7/16"/2000 640 .927" 7/16"/Std. 640 .927" 7/16"/Std. 647 .927" 7/16"/2000 649 .927" 7/16"/Std. 649 .927" 7/16"/2000 658 .927" 7/16"/Std. 658 .927" 7/16"/Std. 658 .927" 7/16"/Std. 650
Fastener Gram Size/Type Weight
Part No.
Description
K1T350-3480BB6F K1T350-3500BB6F K1T350-3750BB6F K1T400-3750CB6F K1T400-3875CB6F K1T400-4000CB6F
SB Chevy 350 SB Chevy 350 SB Chevy 350 SB Chevy 400 SB Chevy 400 SB Chevy 400
Main Rod Stroke Journal Journal Flange
Weight
3.480" 3.500" 3.750" 3.750" 3.875" 4.000"
53 lbs. 53 lbs. 55 lbs. 54 lbs. 57 lbs. 57 lbs.
350 350 350 400 400 400
2.100" 2.100" 2.100" 2.100" 2.100" 2.100"
Chevy Chevy Chevy Chevy Chevy Chevy
NEW VENDOR
Valve Springs K-Motion valve springs are coiled from the very best silicon or H-11 tool steel available for superior dependability. Sold in sets of 16. To order a single spring, add -1 to the end of the part number. Part No.
Type
KMOK-800 Double Silicon KMOK-850 Double Silicon KMOK-950 Double H-11 w/Damper KMOK-1000 Double H-11 w/Damper KMOK-1000H Double H-11 w/Damper KMOK-1100 Double Silicon w/Damper KMOK-1200 Double H-11 KMOK-1500 Triple H-11 KMOK-1600 Double Silicon w/Damper KMOK-1800 Triple H-11
Diameter
Installed Height
Open Height
Coil Bind
Notes
1.460" 1.550" 1.550" 1.625" 1.625" 1.550" 1.625" 1.650" 1.550" 1.650"
165 lbs. @ 1.850" 135 lbs. @ 1.900" 245 lbs. @ 2.000" 240 lbs. @ 1.900" 265 lbs. @ 2.000" 230 lbs. @ 1.900" 260 lbs. @ 2.000" 265 lbs. @ 2.000" 200 lbs. @ 1.950" 340 lbs. @ 2.100"
495 lbs. @ 1.150" 430 lbs. @ 1.225" 690 lbs. @ 1.300" 740 lbs. @ 1.200" 825 lbs. @ 1.200" 555 lbs. @ 1.250" 880 lbs. @ 1.250" 950 lbs. @ 1.200" 528 lbs. @ 1.250" 921 lbs. @ 1.250"
1.085" 1.160" 1.150" 1.090" 1.090" 1.150" 1.150" 1.090" 1.170" 1.150"
Up To .700" Lift Up To .630" Lift Up To .750" Lift Up To .750" Lift Up To .850" Lift Up To .640" Lift Up To .790" Lift Up To .850" Lift Up To .720" Lift Up To .890" Lift
Valve Locks
Titanium Retainers
K-Motion Valve Locks are fully machined and heat treated. They feature the more desirable 10° angle that helps eliminate the “pull thru” problem common with standard 7° locks. Part No.
Valve Stem
KMOK-6110* 11/32" KMOK-6120* 3/8" KMOK-6130 11/32" KMOK-6140 11/32" KMOK-6160 3/8" *Recess for lash caps
Height
Standard Standard Standard +.050" +.050"
K-Motion Retainers are manufactured from high strength titanium and of fer an additional .050" installed height over standard retainers. Used with 10° locks. Sold in sets of 16. Valve Spring Application
A
KMOK-7300
K-800 K-850, K-900, K-950, K-1100, K-1600 K-1000, K-1000H K-1400, K-1500, K-1800
1.480"
1.065"
.700
–
1.500"
1.110"
.710"
–
1.500" 1.500"
1.180" 1.180"
.765" .635"
– –
KMOK-7320 KMOK-7330 KMOK-7370
Joe Irwin
110
Dimensions B C
Part No.
D
Photo: Skip Konkle
2010
097-112OW10.indd 110
11/10/09 9:38:12 AM
Kinsler Siamese Stacks KNERD-5020
Composite Air Box Assembly KNE100-8567
For use with Kinsler fuel injection systems on Chevy small block V8’s. Fits units with 2-5/8" O.D. injector tubes, 2-1/2" I.D. injectors with a 2.80" center-to-center bore measurement. Stacks include 9" L. x 5-1/2" W. x 6-3/4" oval top plate and one air cleaner.
Lightweight yet durable sprint car style air boxes are a must for any racer currently using traditional multi-siamese stacks. Constructed from ultra-light weight carbon fiber, the air box provides ample air flow for your racing needs. Air filter is washable and reusable. No holes in base. Replacement Components
Individual Round Style Air Filters
Part No.
“Early Type” fuel injector single stack filters are for use with velocity stacks, or straight tubing. Packaged eight per box. Part No.
Mtg. Flange I.D.
Injector Bore I.D.
Air Filter Dia. x Length
KNERD-0620 KNERD-0710 KNERD-0720
2-1/4" 2-1/2" 2-1/2"
2-3/16" 2-7/16" 2-7/16"
3-1/2" x 6" 3-1/2" x 5" 3-1/2" x 6"
Engineered for use with stock, uncut, siamesed ram tubes. Sold complete with 9" L. x 5-1/2" W. x 6-3/4" oval top plate. Sold in sets of four. Part No.
Center-to-Center O.D.
2-1/4" 2-1/2" 2-5/8"
I.D.
Model
Bore Measurement
2-3/16" “Q” 2-7/16" “P” 2-1/2" “327-C-84”
2.44" 2.70" 2.70"
Performance Gold Oil Filters Filters deliver high volume, positive oil flow with low restriction and provide the proper balance between engine protection and oil pump drag. An inner element traps contaminants as small as 10 microns. Flow rates are between 1216 GPM (depending upon filter size) and filters have up to 550 PSI of hydrostatic burst strength. Part No.
Description
KNEHP-3001......Ford/Chrysler Applications KNEHP-3002......Chevrolet
Air Filter Oil And Cleaner K&N Air Filter Oil is formulated for superior air filtration when used with K&N filters. The cleaner will clean K&N filter elements and is biodegradable. Part No.
Rubber Base Vent Filters Filters clamp to metal or plastic for use on engines, transmissions and rear ends. Vents have chrome tops and include clamp. Part No.
Dual Oval Style Air Filters “Late Type” Hilborn Siamese Stacks
KNERD-4400 KNERD-4600 KNERD-4650
Description
KNE99-5000 ......Recharger Kit (6.5 Oz. Oil And 12 Oz. Cleaner) KNE99-5050 ......Recharger Kit (8 Oz. Oil And 12 Oz. Cleaner) KNE99-0504 ......6 Oz. Air Filter Oil, Aerosol KNE99-0516 ......12 Oz. Air Filter Oil, Aerosol KNE99-0533 ......8 Oz. Air Filter Oil, Squirt KNE99-0551 ......1 Gallon Filter Oil KNE99-0606 ......12 Oz. Air Filter Cleaner, Squirt KNE99-0621 ......32 Oz. Air Filter Cleaner, Squirt KNE99-0635 ......1 Gallon Air Filter Cleaner
Description
KNE100-8564 ........... Air Filter Only KNE100-8565 ........... Air Box Base Only
Ground Shipment Only
Application
Flange I.D.
KNE62-1320 Trans./Rear End 3/8" KNE62-1330 Trans./Rear End 1/2" KNE62-1340 Trans./Rear End 5/8" KNE62-1360 Trans./Rear End 3/4" KNE62-1370 Trans./Rear End 1" KNE62-1390 Trans./Rear End 1-1/4" KNE62-1420 Trans./Rear End 1" KNE62-1440 Crankcase 1-3/8" KNE62-1460 Crankcase 1-1/2" KNE62-1490* Valve Cover 1-1/4" KNE62-1511 Valve Cover 1" KNE62-1512 Valve Cover 1-1/4" KNE62-1513 Valve Cover 1-3/8" KNE62-1514 Valve Cover 1-1/2" KNE62-1515 Valve Cover 1-3/4" KNE62-1516* Valve Cover 1-1/4" KNE62-2470 Trans./Rear End 5/16" KNE62-2480 Trans./Rear End 9/16" *Push-In Rather Than Clamp-On Breather.
Height
Shield
2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 1-3/8" 1-3/8"
1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2-1/2" 2-1/4" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 1-1/8" 1-1/8"
No No No No No No No No No No No No No No No Yes No No
Steel Base Vent Filters Crankcase vent filters, with vent tubes swedged into base, press into vent hoses or grommets. Filters with mounting stud are ideal for remote mounting. Part No.
Application
Vent O.D.
O.D.
Height
KNE62-1000 KNE62-1010 KNE62-1020 KNE62-1030 KNE62-1040 KNE62-1090* KNE62-1100* KNE62-1110* KNE62-1140 KNE62-1160 KNE62-1170 KNE62-1518 KNE62-1519 KNE62-1520 *With Stud.
Fuel Cell/Rear End, -8AN Fuel Cell/Rear End, -10AN Fuel Cell/Rear End, 5/8" Hose Fuel Cell/Rear End, 3/4" Hose Fuel Cell/Rear End, 1" Hose Fuel Cell/Rear End, -8AN Fuel Cell/Rear End, -10AN Hose Fuel Cell/Rear End, 5/8" Hose Fuel Cell/Rear End, -10AN Fuel Cell/Rear End, 3/4" Hose Fuel Cell/Rear End, 1" Hose Valve Cover, Push-In With Shield Valve Cover, Push-In With Shield Valve Cover, Push-In With Shield
3/8" 1/2" 5/8" 3/4" 1" 3/8" 1/2" 5/8" 1/2" 3/4" 1" 5/8" 3/4" 1"
2" 2" 2" 2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 3"
1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2"
600 Mini Sprint Performance Air Filter KNEE2990 Air filter is designed to increase horsepower and acceleration while providing excellent filtration. Washable and reusable.
2010
097-112OW10.indd 111
O.D.
111
11/10/09 9:38:26 AM
NEW VENDOR
Xtreme Performance Tri-Lecular Bearings
Alecular SI Bearings
Tri-metal, enhanced copper lead bearings have nickel barrier plating to withstand high loads and extreme RPM. Multi-layer adhesion process improves stability between top and intermediate layers. Large, chamfered oil holes, 3/4 grooving, and a narrow design make Xtreme main bearings compatible with large radii crankshafts. Rod bearings have 45° chamfers on the crank side for increased radial clearance. Specify size (Standard, -.010", -.020" or -.030") when ordering.
Alecular tri-metal (Aluminum-TinSilicon) bearings offer long wear, excellent wall variance control and improved clearance tolerances. Tri-metal composition resists corrosion and debris embedment. Specify size (Standard, -.010", -.020" or -.030") when ordering.
Rod Bearings
Engine
Description
Main Bearings
Engine
Rod Bearings
SB Chevy 283-350 KEBCR807SI SB Chevy 400 KEBCR807SI
Description
Main Bearings
Description
Stock Stock
KEBMB557SI KEBMB509SI
Stock Stock
Description
SB Chevy Without 305-350, 1967-99 KEBCR8025XP Dowel Hole KEBMB5425XP 3/4 Grooved SB Chevy 400, Without 1970-80 KEBCR8025XP Dowel Hole – – Special Performance, Without KEBCR8028XP* – – Honda 1.8885" Rod Sizing Dowel Hole Special Performance, KEBCR8027XP* With Dowel Hole – – Honda 1.8885" Rod Sizing *Special Performance, Honda Rod Sizing (1.8885") Bearings Are Engineered For Use With A 2.0150"-2.0155" Housing Bore.
Alecular Pro Series Bearings Designed for use with aftermarket crankshafts, Alecular Pro Series Bearings use an alloy of aluminum, tin, and copper-plus bonded to a steel back to compensate for distortion and misalignment. Specify size (Standard, -.010", -.020" or -.030") when ordering. Engine
Rod Bearings
Description
Main Bearings
Description
SB Chevy 305-350, 1967-99 KEBCR850HP With Dowel Hole KEBMB5142HP Grooved Uppers SB Chevy 305-350, Without 1967-99 KEBCR848HP Dowel Hole KEBMB5160HP Fully Grooved SB Chevy 400, 1970-80 KEBCR850HP With Dowel Hole KEBMB5143HP Grooved Uppers Without SB Chevy 400, 1970-80 KEBCR848HP Dowel Hole – –
Dragon Claw Fuel Injection Unit KINSBC-DC-A
Replacement Components For Kinsler Fuel Injection Part No.
Dragon Claw unit is for small Chevy ASCS heads. The magnesium manifold’s adjustable torque curve provides more horsepower. Components include aluminum linkage with grade eight fasteners, hard anodized aluminum barrel valve, extra wide throttle shaft bushings, CNC-machined ports, inboard and outboard nozzle bosses and tapered ram tubes with 180° tops and removable adapters. Available with magnesium or aluminum manifold to fit various applications. Please call salesperson with your specific requirements.
K-Jets Each K-type Jet is precisely machined and stamped with the Kinsler name. Reamed orifices are available from .050" through .108" and controlled to within .0002". Part No.
Size
Part No.
KIN3715-50 ...... 0.050" KIN3715-52 ...... 0.052" KIN3715-54 ...... 0.054" KIN3715-56 ...... 0.056" KIN3715-58 ...... 0.058" KIN3715-60 ...... 0.060" KIN3715-62 ...... 0.062" KIN3715-64 ...... 0.064"
Size
KIN3715-66...... 0.066" KIN3715-68...... 0.068" KIN3715-70...... 0.070" KIN3715-72...... 0.072" KIN3715-74...... 0.074" KIN3715-76...... 0.076" KIN3715-78...... 0.078" KIN3715-80...... 0.080"
K-140 High Speed Bypass Part No.
Description
KIN3970 ................... 49-106 PSI KIN3972 ................... 72-152 PSI KIN3989 ................... Filter
112
Part No.
Size
KIN3715-82 ........0.082" KIN3715-84 ........0.084" KIN3715-86 ........0.086" KIN3715-88 ........0.088" KIN3715-90 ........0.090" KIN3715-92 ........0.092" KIN3715-100 ......0.100" KIN3715-108 ......0.108"
KIN1965-7
Description
KIN1965-7 ....... Up Nozzle Lines, -3AN Male O-ring x -3AN Female Swivel 90°, 7" Long KIN1965-9.5 .... Up Nozzle Lines, -3AN Male O-ring x -3AN Female Swivel 90°, 9-1/2" Long KIN1966-19 ..... Down Nozzle Lines, -3AN Female x -3AN Female Swivel 90°, 19" Long KIN2228 .......... Injector Nozzles (Special Order Only), Set of Eight (Specify) KIN2379 .......... Aluminum Banjo Body Only, For 1/2"-20 Nozzle, 1/8" NPT Female Port KIN2393 .......... Aluminum 1/2"-20 Nozzle Banjo With 1/8" NPT Female Port, Sintered Bronze Air Filter With 1/8" NPT Male Thread KIN2394 .......... Air Filter Only, Sintered Bronze With 1/8" NPT Thread KIN2397 .......... Nozzle O-ring, Kinsler/Hilborn 1/2"-20 Thread KIN2913F ........ 400 Fuel Pump, Used On Most 360’s KIN2917F ........ 500 Fuel Pump, Used On Most 410’s KIN3030 .......... Low-Speed Bypass KIN3036 .......... Bypass Poppet For Main Bypass KIN3040 .......... 0.183" Brass Shim For Bypass KIN3043 .......... 0.030" Brass Shim For Bypass KIN2913F KIN3112 .......... Main Bypass, -6AN Male Flare Quick Disconnect KIN3319 .......... 0.019" Spring For Bypass KIN3339 .......... 0.039" Spring For Bypass KIN3720 .......... Plastic Jet Holder Case KIN3903 .......... Low Speed Adjustable KIN3112 KIN3904 .......... High-Speed Bypass KIN3944 .......... Diaphragm For KIN3904 KIN4156 .......... KFI Fuel Filter, -6AN Fittings KIN5520 .......... K-Type 2-Pc. Aluminum Throttle Link Arm, 5/16" KIN5521 .......... K-Type 2-Pc. Aluminum Throttle Link Arm, 3/8" KIN6160 .......... 1/2"-20 Port Plugs KIN6178 KIN6178 .......... -12AN x -8AN Fuel Pump Fitting KIN7793 .......... 2-3/16" To 2-1/2" High Flow Restrictor
2010
097-112OW10.indd 112
11/10/09 9:38:50 AM
RACING SEAT MEASUREMENTS • Select a seat base width that will comfortably fit the driver's hips. • Shoulder restraints should be based upon the driver's shoulder width.
Lightweight Full Containment 10° Layback Oval Track Seats
Lightweight Sprint Deluxe Upright Oval Track Seats
Complete seat is a two-piece, aluminum extrusion with padded rib supports and elongated bottom. Base has adjustable shoulder restraints and a helmet restraint. Four-piece covers are available separately in black only.
Double rib support, 10° layback seats are made of MIG-welded .081" thick aluminum with extrusions around seat perimeters for added strength and safety. Flared openings are strategically placed to lighten and strengthen the seats. Seats weigh 10 lbs. and use seat cover clips instead of cumbersome snaps. Supports, covers and restraint kits sold separately.
Seat Part No.
Description
Black Cover Part No.
Regular Seat Bases 14" Seat Base KIR66100 14.5" Seat Base KIR66200 15" Seat Base KIR66300 15.5" Seat Base KIR66400 16" Seat Base KIR66500 17" Seat Base KIR66700
KIR66111 KIR66311 KIR66311 KIR66311 KIR66511 KIR66511
Width
Seat Part No.
Black Cloth Cover Part No.
14" 14.5" 15" 15.5" 16" 16.5" 17"
KIR56100LW KIR56200LW KIR56300LW KIR56400LW KIR56500LW KIR56600LW KIR56700LW
KIR58111LW KIR58311LW KIR58311LW KIR58311LW KIR58511LW KIR58511LW KIR58511LW
Intermediate Layback Oval Track Seats Intermediate, double rib support layback seats are made of .125" aluminum and offered in 10° layback models. Features include contoured seat bottoms for maximum head room, reinforced head supports and raised fronts for superior thigh support. Seat covers must be purchased separately.
Lightweight Micro/Mini Sprint Oval Track Seats
Black Vinyl Cover Part No.
Black Cloth Cover Part No.
Red Cloth Cover Part No.
Blue Cloth Cover Part No.
Double Rib Support 10° Layback 15" KIR39300 KIR36301 16" KIR39500 KIR36501 17" KIR39700 KIR36701 18" KIR39900 KIR36901
KIR36311 KIR36511 KIR36711 KIR36911
KIR36312 KIR36512 KIR36712 –
KIR36319 KIR36519 KIR36719 –
Width
Seat Part No.
Head Support Shoulder Support Leg Support
Seat Side Supports
Part No.
Description
Head Supports KIR00100 Right KIR00200 Left Leg Supports KIR00300 Right Right KIR00300LW* (Lightweight) KIR00400 Left Left KIR00400LW* (Lightweight) Shoulder Supports KIR00500 Right KIR00600 Left
KIR00101 KIR00201
Grey Black Cloth Red Cloth Cloth Cover Cover Cover Part No. Part No. Part No.
KIR00112 KIR00117 KIR00119 KIR00212 KIR00217 KIR00219
KIR00301
KIR00311
KIR00312 KIR00317 KIR00319
–
KIR00311LW*
KIR00401
KIR00411
–
KIR00411LW*
KIR00501 KIR00601
KIR00511 KIR00611
–
–
KIR00412 KIR00417 KIR00419 –
–
–
KIR00512 KIR00517 KIR00519 KIR00612 KIR00617 KIR00619
*Special lightweight supports are for use with 56LW and 58LW Series Lightweight Sprint Deluxe upright oval track seats only.
113-128OW10.indd 113
Blue Cloth Cover Part No.
KIR00111 KIR00211
–
Description
Seat Part No.
Black Cover Part No.
13" Seat Base, 8° KIR52013LW KIR52911LW 14" Seat Base, 8° KIR52100LW KIR52111LW 15" Seat Base, 8° KIR52300LW KIR52311LW
Head And Shoulder Restraint Kit
Supports provide protection for legs and shoulders under high G-forces and during an accident. Covers must be purchased separately. Designed for use with all Kirkey seats except full containment models. Black Vinyl Cover Part No.
Complete seat is a two-piece, aluminum extrusion with padded rib supports, elongated bottom and reinforced/adjustable head and shoulder restraint system with energy absorbing impact foam. Covers are available separately in black only.
Update an existing Kirkey seat to accept head and shoulder restraint system. Retro-fit kits of .100" thick 5052 grade aluminum are padded with energy absorbing foam and available in standard or short versions (4" shorter left side head restraints for confined cockpits). Covers, brackets and hardware are included. Part No.
Description
Standard Head and Shoulder 13" Restraint Kits KIR98701 ........ Black Vinyl KIR98711 ........ Black Cloth KIR98712 ........ Red Cloth KIR98717 ........ Grey Cloth KIR98719 ........ Blue Cloth 12" Short Head and Shoulder 22" Restraint Kits KIR98701-S ..... Black Vinyl KIR98711-S ..... Black Cloth KIR98712-S ..... Red Cloth KIR98717-S ..... Grey Cloth KIR98719-S ..... Blue Cloth Note: Complete kit must be used to be effective and the head restraint cannot be used separately. 2010
5"
15" 14.5" 7"
6"
9"
11.5"
113
11/12/09 12:30:02 PM
Black Cover
Deluxe Leg Restraints
Center Steering Pad KIR00001
May be added to any Kirkey seat to add improved leg protection. They are 20" long, significantly longer than standard supports. Covers must be purchased separately.
Black nylon covered, high density foamfilled pad is 6" dia. and 2" thick. Designed for use with three-spoke steering wheels.
Part No.
Description
Airknit Black Cover Part No.
Airknit Grey Cover Part No.
KIR01300 KIR01400
Right Left
KIR01341 KIR01441
KIR01347 KIR01447
Lumbar Support KIR99020 High density padding gives added support to lower back area.
Vinyl Coil-Over Covers Covers protect coil-overs by keeping out mud and rocks. Velcro closures allow easy spring adjustments. Sold in pairs.
Quick Change Gear Pan KIR99100
Part No.
Aluminum drain pan with handle has a tray so hot oil will run off the gears.
Description
KIR00041 ..........Black Coil-Over Covers KIR00042 ..........Red Coil-Over Covers KIR00043 ..........Blue Coil-Over Covers
NEW VENDOR
GT-1 High Performance Racing Oils Kendall GT-1 High Performance Racing Oils provide excellent resistance to viscosity and thermal breakdown at high temperatures. Protects against sludge and varnish formation along with providing good foam resistance. GT-1 Oils also offer enhanced wear protection for engines with flat-tappet camshafts. Part No.
Description
KEN527-7133 ........... 30w, GT-1, High Performance KEN527-7134 ........... 40w, GT-1, High Performance KEN527-7135 ........... 50w, GT-1, High Performance KEN527-7136 ........... 10w30, GT-1, High Performance Synthetic Blend KEN527-7138 ........... 20w50, GT-1, High Performance
KEN527-7133
KEN527-7134
KEN527-7135
KEN527-7136
KEN527-7138
Bulk Tire Relief Components Kwik-Change offers many of their products separately in bulk form.
Part No.
Description
Part No.
KCP713-001-H ......... Hollow Plugs, 2-Piece KCP713-001-S ......... Solid Plugs, 4-Piece KCP713-002 ............. Schrader Valves, 2-Piece KCP713-004 ............. Screens, 4-Piece KCP713-005 ............. Sealing Washers, 4-Piece KCP713-006-O ......... O-Rings, 4-Piece KCP713-006-Q ......... Quad Rings, 4-Piece KCP713-007 ............. Grommets, 4-Piece KCP713-100 ............. Relief Valves, 4-Piece KCP713-123 ............. Light Springs, 8-Piece KCP713-124 ............. Heavy Springs, 8-Piece KCP713-127 ............. Poppets, 2-Piece
KCP713-258-1
114
KCP713-158-1
KCP714-1123
KCP713-600
Description
KCP713-158-4 ......... Plastic Quick Disconnects, 4-Piece KCP713-158-1 ......... Plastic Quick Disconnect, 1-Piece KCP713-258-1 ......... Alum. Quick Disconnect, 1-Piece KCP713-258-4 ......... Alum. Quick Disconnects, 4-Piece KCP713-300 ............. Preset Pump, 30 PSI KCP713-300-G ......... Gauge Head, 30 PSI Preset Pump KCP713-600 ............. Preset Pump, 60 PSI KCP713-600-G ......... Gauge Head, 60 PSI Preset Pump KCP714-1000 ........... Next Generation Relief, 1-Piece KCP714-1000-Q ....... Next Generation Quad Rings, 4-Piece KCP714-1123 ........... Next Generation Light Springs, 8-Piece KCP714-1124 ........... Next Generation Heavy Springs, 8-Piece KCP714-1127 ........... Next Generation Poppets, 2-Piece
KCP714-1127
KCP713-004
KCP713-005
KCP713-100 KCP714-1000
KCP713-001-S KCP713-001-H
KCP713-002
2010
113-128OW10.indd 114
11/10/09 9:54:18 AM
Gen 2 Power Steering Gear KSEKSGEN2L5650
Power Steering Reservoir KSEKSF1010
“Second Generation” power steering has a new 4° valve and a 20% quicker lead ball screw for quicker feedback and front wheel stability. Inboard mounting strengthens top steering gear mount and eliminates the steering gear as a structural member. The reservoir is built into the live hub to prevent turbulence and aeration. Unit has O-ring sealed wing slider ports.
KSE Power Steering Reservoir with filter has -10AN outlet, -6AN return fittings, and wing slider return fitting.
Part No.
Quick Release Steering Wheel Hubs Remove steering wheel quickly for easy entry and exit. Part No.
Description
KSEKSG1027 KSEKSG1025 ............ Tapered Steering Hub KSEKSG1027 ............ Quick Release Hub, Pull Style
Description
KSEKSG1070 ............ Steering Mount, 1/2 Box KSEKSM6002 ........... Wing Port Fitting KSEKSG1070
Elixer Racing Power Steering Fluid KSEKSM1086 Fluid has a higher viscosity index as well as anti-foaming, anti-wear and anti-oxidation additives to minimize power fade, lower corner speed assist loss and decrease heat build-up. One quart containers.
Front Cover And Water Pump Assembly KSEKSD10-10000
Through Shaft Power Steering Pump KSEKSC1068-002 Aluminum power steering pump uses minimal horsepower, but can generate 1,200 PSI. Pump has 3/8" male hex drive input, 3/8" female hex drive output and accepts current fuel injection pumps. Easily reversed and may be cam driven or driven off the back of dry sump pump. Part No.
Available in aluminum, assembly is compatible with all gear and chain drive systems and has bolt patterns for all current dry sump and fuel pump setups. The cover has four possible locations for the timing window, and includes a front drive adapter and two hose adapters for water pump block ports. Pan seal lip is not included. (Use Mr. Gasket MRG99 seal lip on non-gear drive units.) Part No.
Description
Replacement And Accessory Components KSEKSD1002 ............ Aluminum Front Cover KSEKSD1011 ............ Crank Drive For Water Pump KSEKSD1011L .......... Aluminum Crank Drive For Water Pump KSEKSD1013 ............ Timing Window Sight Glass KSEKSD1023 ............ Cam Drive, 1/2" Hex KSEKSD1033 ............ Water Pump Repair Kit KSEKSD1041 ............ Standard Water Pump, Less Housing
Description
Replacement Components KSEKSC1027 ............ Hex Shaft KSEKSC1038 ............ Seal Kit For KSEKSC1030-001 And KSEKSC1030-002 KSEKSC1069 ............ Seal Kit For KSEKSC1068-002 (New Style) KSEKSM1039 ........... Power Steering Bearing
Power Steering Pump Adapter KSEKSC1019 Adapter attaches to the firewall and accepts power steering pump.
Shane Cottle
Photo: Jim DenHamer
2010
113-128OW10.indd 115
115
11/12/09 12:33:41 PM
DX Computerscales LON72634
Accuset Basic System Computerscales LON72595
View all wheel weights and partial percentages simultaneously on large, separate screens. Intel microprocessor controlled scales have a 10-setup memory and can compute center of gravity. Set includes dead flat, low profile 1,500 lb. pads, heavy duty yellow cables with billet AN connectors and gold plated contacts, battery, charger, and heavy duty carrying case.
Accuset Basic System has a single button to display all wheel weights and another to show all partial percentages. Dead flat, 15" low profile CNC-machined scale pads, heavy duty red cables with AN connectors and black plastic carrying case are included.
DXI Pro NEW! Wireless Computerscales Scales have memory and display all wheels and partial weights. Compact control box has a wireless receiver, and transmitters are built into each pad, eliminating external antennas or modules. Choose single or dual load cell pad systems. Dual load cells offer a more rigid platform. Systems include dead flat, CNC-machined pads and a roll-around cart. Part No.
Description
LON72700 .........Basic Wireless With No Case LON72710 .........DXI Pro Wireless Computerscales, Single Load Cell Pads LON72724 .........DXI Pro Wireless Computerscales, Dual Load Cell Pads
DXI Vision Professional Model Computerscales NEW! System can display all wheel weights on individual screens, and partial weights and percentages simultaneously on a four-line display. Memory can be used to compare weights. Choose standard, single load cell pads, or dual load cell pads with a more rigid platform and reduced deflection. Systems include dead flat, CNC-machined scale pads, heavy duty yellow cables with billet AN connectors and gold plated contacts, and heavy duty carrying case. Part No.
Description
LON72609 .........Single Load Cell Pads LON72652 .........Dual Load Cell Pads
DXI Vision Semi-Pro Model Computerscales LON72603 A step-up from economy units, Semi-Pro system will display all wheel weights, partial weights and percentages at the same time. Heavy duty red cables with AN connectors, dead flat, CNC-machined scale pads and black plastic carrying case are included.
Computerscales LON72581 NEW! Basic system offers large displays of weights and percentages, all accessed with a single push button. System includes heavy duty red cables with AN connectors, 12" x 12", 1,100 lb. pads and black plastic carrying case.
Scale Cart LON72305 New, improved portable cart offers convenient storage of computer scales in the garage or at the track and holds control box at the proper height for easy viewing. Lid closes, securing pads and contents.
Individual Scale Pad Levelers LON72900 Easily level a complete scale system in just minutes for an accurate set-up anywhere. Fits any Computerscale pad. Set of four.
Billet Aluminum Roll-Off Levelers NEW! LON72908 Roll-Off Levelers allows rolling race car off of the scale pads and then back on to eliminate the possibility of tire bind or side loads for more consistent scale readings. Billet construction levelers deliver increased rigidity when compared to traditional formed aluminum units. Designed for 2-1/2" scale pads, levelers include six swivel adjusters for accurate set-ups. Sold in sets of four.
Toe Plates LON79500 Rest plates against the tire on each side and use a tape measure. Two tape measures included.
Tire Tape LON50870 Tape is 1/4" wide x 10' long.
116
NEW! NEW!
2010
113-128OW10.indd 116
11/10/09 9:55:11 AM
Memory Tire Pyrometers
Quick Fill Tire Gauges
Longacre standard and deluxe pyrometers record and display 12 tire temperatures at the same time and store 10 complete sets of temperatures with recall. Deluxe version will compute average tire temperatures for each tire, and features a backlite display with automatic shut-off and a 4-car, 75 lap memory stopwatch. The deluxe pyrometer can start recording tire temperatures at any corner. The standard unit must start at the right front tire.
Connect an air line to the Quick Fill Gauge and press the lever to fill tires twice as fast. Gauges feature glow-in-the-dark faces and bleed buttons.
Part No.
Description
LON50682 .........Standard Pyrometer LON50690 .........Deluxe Pyrometer
Infrared Laser Pyrometers Laser-sighted pyrometers deliver instant response and non-contact temperatures. Units hold readings longer than previous units. Part No.
Description
LON50612 .........To 600째F. LON50614 .........To 1000째F.
Deluxe Digital Pyrometer LON50640 Performs instant temperature readings from 0-2,000째F. and holds the highest temperature attained. Compare temperatures with the press of a button. Includes foam lined case.
Part No.
Description
LON50406 .........0-60 PSI LON50426 .........0-30 PSI
Standard Tire Gauges Easy-to-read, 2" dial-type gauges have 14" hoses, air release buttons, and rubber gauge bumpers to prevent damage. Choose white or glow-inthe-dark background. White Part No.
Glow-In-The-Dark Part No.
Description
LON50400 LON50420 LON50450
LON50401 LON50421 LON50451
0-60 PSI In 1 lb. Increments 0-30 PSI In 1/2 lb. Increments 0-15 PSI In 1/4 lb. Increments
Deluxe Tire Gauges Deluxe Tire Gauges with 2-1/2" glow-in-the-dark dials are fitted with high flow button air releases to hold pressure until released, ultra-flexible hoses, swivel chucks, and rubber gauge bumpers. New gauge dampers give more accurate readings and extend gauge life. Part No.
Description
LON50402 .........0-60 PSI In 1 lb. Increments LON50422 .........0-30 PSI In 1/2 lb. Increments LON50452 .........0-15 PSI In 1/4 lb. Increments LON50518 .........Foam Lined Hard Case
Valve Core Tools Replace valve cores quickly. Deluxe aluminum tool stores valve cores in the handle (three cores included). Compact tool may be attached to a key chain.
Magnum Tire Gauges
Part No.
Part No.
Description
LON50270 .........Deluxe Valve Core Tool LON50272 .........Compact Valve Core Tool
Hot Lap (In-Car Timing System) LON21705 An infra-red transmitter mounted at track side automatically triggers the In-Car Timer with 100% accuracy each and every lap. Transmitter works as far away as 60 feet. Includes display, receiver, transmitter, harness and instructions.
Two-Car Stopwatch Clipboard Aluminum clipboard includes two dual-memory Robic stopwatches which display average MPH and lap count. Lap time and chassis sheets are also available. Part No.
Description
LON22318 .........Two-Car Stopwatch Clipboard LON22523 .........Pre-Race Checklist, 2 Pads/50 Sheets Each NEW! LON22525 .........Lap Timing/Race Scoring, 2 Pads/50 Sheets Each NEW! LON22528 .........Chassis Set-Up/Tire Chart, 2 Pads/50 Sheets Each NEW!
3-1/2" glow-in-the-dark gauges include hi-flow release buttons, swivel chucks, internal gauge dampers for more accurate readings, 17" ultra flexible hoses, and silver case. Description
LON50404 .........0-60 PSI In 1 lb. Increments LON50424 .........0-30 PSI In 1/2 lb. Increments LON50454 .........0-15 PSI In 1/4 lb. Increments
Liquid-Filled Tire Gauges Gauges have pressure equalizer buttons to eliminate pressure differences, a 2-1/2" diameter, glow-in-the-dark face with protective bumper and a 17" hose with swivel chuck. Part No.
Description
LON50403 .........0-60 PSI In 1 lb. increments LON50423 .........0-30 PSI In 1/2 lb. increments LON50453 .........0-15 PSI In 1/4 lb. increments
Digital Series Tire Gauges Accurate and easy to read. Gauges include back lights, air release buttons, external gauge bumpers and are available with angle or ball chuck. Case is included. Part No.
Description
LON50348 .........0-100 PSI, Economy Model, Ball Chuck LON50351 .........0-25 PSI, Angle Chuck LON50355 .........0-60 PSI, Ball Chuck LON50356 .........0-60 PSI, Angle Chuck NEW! LON50358 .........0-125 PSI, Angle Chuck NEW!
2010
113-128OW10.indd 117
117
11/10/09 9:55:39 AM
Switch Panels Longacre Switch Panels are assembled and wired using the same color code as the Longacre gauge panels for an easy to understand, professional installation. Longacre ignition switches are heavy duty 12 volt, 40 amp capacity. Lightweight aluminum panels include fully weatherproof toggle switch, LON44802 which features a special polyurethane coating to isolate the unit from dirt, moisture and the elements.
Memory Stopwatch LON22162 Stopwatch offers crisp, one-button activation and a 10-lap memory. Auto shut-off prolongs battery life.
Air Density Gauge LON50888 Make accurate jet changes by monitoring air density percentage. Precision gauge includes case and jetting chart.
Part No.
Sportsman Gauges
Heavy Duty 40 Amp Switches
Economical, steel-cased gauges have CNC-machined brass gears, industry standard mechanisms and viscous pointers for accurate readings. Back lighting kit and fittings are included. Part No.
Description
Aluminum Switch Panels With Weatherproofing LON44672 ................ Ignition Switch, Starter Button and Accessory Switch LON44802 ................ Ignition Switch and Starter Button
Switches have silver plated contacts, solid brass mechanisms and tough phenolic bodies. Choose from standard or weatherproof switches. Weatherproof switches are well suited to the rigors of dirt oval track applications.
Description
LON46505 .........Fuel Pressure, 0-15 PSI LON46510 .........Oil Pressure, 0-100 PSI LON46515 .........Water Temperature, 100°-280°F. LON46520 .........Oil Temperature, 100°-340°F.
Description
Ignition Switch With Weatherproof Switch Cover (or Mag Kill Switch) Ignition Switch, Three Terminals Starter Button With Weatherproof Rubber Cover Starter Switch, Momentary Toggle With Weatherproof Switch Cover Ignition Switch With Aircraft Safety Switch Cover (or Mag Kill Switch) Ignition/Start Combination With Aircraft Safety Switch Cover Aircraft Safety Switch Cover Only
Digital Memory Tachometer LON44391 NEW! Digital 0-10,000 RPM tachometer is extremely accurate and has a high RPM warning light and easy recall. Weighs only 1-1/2 oz.
Gagelites Engine Warning Light Systems Sender Part No.
Kit Part No.
Description
Pipe Thread Size
LON43080 LON43000 LON43250 LON43252 LON43300 LON43350
LON40000 LON40100 LON40150 LON40152 – LON40350
20 PSI Low Oil Press. 15-50 PSI Adj. Oil Press. 230° High Water Temp. 230° High Water Temp. 250° High Water Temp. 270° High Oil Temp. NEW!
1/8" NPT 1/8" NPT 1/2" NPT 3/8" NPT 1/2" NPT 1/2" NPT
Weatherproof Part No.
LON45420 LON45430 LON45460
LON45423 – LON45466
LON45462
–
LON45470
–
LON45490 LON45370
– –
Verify piston ring, head gasket and valve condition. Easy-to-use tool includes fitting and hose assembly to test most engines.
Digital Shock Inflator LON50473 NEW!
Low Oil Pressure Ignition Shut-Off Switch LON43600 NEW!
Shock Inflator includes a digital 0-300 PSI gauge and an extra long hose to allow filling shocks on car. Inflator connects directly to nitrogen line, filling and bleeding shocks quickly, while special chuck prevents pressure loss or inaccurate settings.
If oil pressure drops below 12 PSI, ignition shuts down and engine cannot start until pressure is back up. Prevents engine damage. Use with momentary toggle switch LON45462.
Brake Pressure Kit LON44145 NEW!
Kit is designed for sprint cars and includes a holder for 9 volt battery, low oil pressure switch (20 PSI), warning light, heavy duty mag kill switch with weatherproof cover, wire and terminals.
Standard Part No.
Engine Leakdown Tester LON73010
A bright indicator light warns of something wrong, and helps save expensive engine parts. Kits include sender, light, wire, terminals and fittings.
Low Oil Pressure Warning Light Kit With Mag Kill Switch LON45620
LON45470
Check front-to-rear brake pressures and set brake bias for best performance. Kit includes two pressure gauges in a foam-lined silver case.
Individual Bulkhead Fittings And Frame Tabs NEW! Part No.
Description
LON45263 .........-3AN Bulkhead Fitting Only. Sold Individually LON45273 .........-4AN Bulkhead Fitting Only. Sold Individually LON45286 .........-3AN Bulkhead Fitting and Frame Tab. Sold Individually LON45288 .........-4AN Bulkhead Fitting and Frame Tab. Sold Individually
118
2010
113-128OW10.indd 118
11/10/09 9:56:15 AM
Spline Hub Steering Quick Disconnect LON56605 NEW! Spline hub design offers better steering control. Includes aluminum hub with pull ring release and double safety grooves. Welds to 3/4" dia. steering shaft.
24 Volt Pit Gun NEW! No more air hoses to tote or trip over. New and improved true portable, battery-powered 24 volt impact gun has a high torque, 1/2" drive that spins lug nuts off or on easily. Long lasting battery provides extended usage. Part No.
Ultra Lightweight NEW! Uncoated Aluminum Wheel Uncoated aluminum wheel is 1/3 the weight of standard wheels. Shot peened, drilled rim offers good grip without wrist strain. Part No.
Description
LON68602 .........One Pit Gun With Battery and Charger LON68604 .........One Pit Gun With (2) Batteries And Fast Charger LON68610 .........(2) Pit Guns With (3) Batteries And Fast Charger
High Density Mini-Roll Bar Padding
Description
LON56866 .........15" Wheel, Flat LON56867 .........15" Wheel, Flat Black
LON56867
Steering Wheel Nose Pad LON56899 NEW!
Padding provides maximum energy absorption and uses a pre-tape adhesive for installation. Fits 1-1/2" tubing, streamlined “mini” style padding improves line of sight and reduces blind spots. Offered in black or red, 3' lengths. Part No.
Oil Filter Cutter LON77750 Rigidly constructed billet aluminum, easy-to-use tool quickly cuts open oil filters for inspection to spot potential engine problems.
Description
LON65182 .........“Mini” Roll Bar Padding, Black, 3' LON65184 ........."Mini" Roll Bar Padding, Red, 3'
Valve Spring Removal Tools NEW! LSM’s innovative tools are available for most cylinder heads and make changing valve springs an easy, one-man operation.
Valve Seat Pressure Testers On-head, adjustable testers work with shaft style and stud mount rocker arms and include 0-600 PSI liquid-filled gauges. Slant handle is ideal for confined engine compartments. Use with LSMPV-001 to check piston-to-valve clearance. Part No.
Description
LSMPC-100 ................Valve Seat Pressure Tester, Standard Handle LSMPC-100SLC ..........Valve Seat Pressure Tester, Slant/Straight Removable Handle LSMPC-100-EXT .........4" Handle Extension For LSMPC-100 or LSMPC-100SLC NEW! LSMPV-001 ................Piston-To-Valve Check Tool Adapter, Inserts In Place Of The Load Cylinder On Any LSMPC-100 Configuration NEW!
“Spring Machine” Bench Top Valve Spring Tester Accurately and easily measures valve spring pressure. Compress the spring to the specified installed height, lock down the stop, and read the gauge. Horizontal design is exceptionally stable. Choose 600 or 1,000 lb. gauge. Part No.
NEW!
Description
LSMSM-600 ...............Valve Spring Tester, 600 lb. Gauge LSMSM-1000 .............Valve Spring Tester, 1,000 lb. Gauge
Valve Lash Adjusting Torque Wrench LSMTQ-100-Set Set valve lash and properly torque adjusters. Cuts lash adjustment time in half. Eliminates rounded-off Allen wrenches and damaged adjusters. Set includes 3/16", 5/32" and 1/8" Allen Wrenches.
Part No.
Description
LSMSC-100 .......SB Chevy With Jesel/T&D, Buick With Jesel LSMSC-150 .......SB Pontiac/Windsor Ford, All With T&D LSMSC-200 .......SB2 With Jesel/T&D, SB Ford With Jesel/T&D, BB Chevy With Jesel/T&D, LSMSC-800 .......Stud Mount Spring Changer, All 7/16" Stud Mount Rocker Systems
“One-Tool” Valve Lash Adjusting Tool Handy adjusting tool can be used with virtually any shaft or stud mount rocker setup. Snap on a 1/2" drive socket and insert the correct hex key. The knurled, anti-slip handle provides a secure grip, even with oily hands. Bushings to accept four different sized T-handles are included. T-handles are not included, but are available separately. Part No.
Description
LSM1T-100.................“One Tool” Valve Adjusting Tool LSM1T-1/8 .................1/8" T-Handle LSM1T-3/16 ...............3/16" T-Handle LSM1T-5/32 ...............5/32" T-Handle LSM1T-7/32 ...............7/32" T-Handle
Dual Feeler Gauge Holder Ideal when setting intake and exhaust valve clearance, Holder secures two sets of 1/2" wide feeler gauges on a single handle. Purchase feeler gauges separately. Part No.
Description
LSMFH-200R ............ Red LSMFH-200BK .......... Black LSMFH-200BL .......... Blue ALL96420 ................. Standard Feeler Gauge Set ALL96421 ................. Angled Feeler Gauge Set
2010
113-128OW10.indd 119
LSM1T-100
119
11/10/09 9:56:33 AM
Slick Mist LUC10160 NEW! Heavy Duty Oil Stabilizer Stabilizer is formulated to eliminate dry starts, resist thermal breakdown and reduce smoke, leaks, knocks and blow-by. May also be used in transmissions, differentials and transfer cases to reduce heat and noise. Sold in one quart or one gallon containers. Part No.
Description
LUC10001 .........Heavy Duty Oil Stabilizer, 1 Quart LUC10002 .........Heavy Duty Oil Stabilizer, 1 Gallon Container
Pure Synthetic Oil Stabilizer LUC10130 Originally designed for racing use with synthetic oil, stabilizer reduces frictional heat and wear in engines, transmissions and differentials for increased horsepower and fuel mileage. Sold in one quart bottles.
20/50, 50 And 70 Plus Racing Oils Super slick high performance lubricants, for racing or heavy duty engines, reduce friction and increase horsepower. Anti-foam agents protect against wear and scuffing and a protective film assures a “wet” start every time. Especially resistant to breakdown caused by alcohol contamination. Part No.
Description
LUC10044 .........50 Plus Racing Oil, 1 Quart LUC10094 .........50 Plus Racing Oil, 2-1/2 Gallon Container LUC10261 .........70 Plus Racing Oil, 1 Quart LUC10262 .........70 Plus Racing Oil, 1 Gallon Container LUC20500 .........20/50 Plus Racing Oil, 1 Quart LUC20502 .........20/50 Plus Racing Oil, 2-1/2 Gallon Container
Slick Mist is a polymer paint gloss intensifier, which can also be used on glass, chrome and vinyl decals. Just spray it on a wet or dry surface and wipe off to provide an excellent shine. Sold in 24 oz. bottle.
Metal Polish LUC10155 NEW! Cleans, polishes and protects aluminum and other metals. Built-in elements prolong and protect the treated surfaces from fading, oxidation or tarnishing. Maximum luster with minimum effort. Does not contain any acids or ammonia. Sold in 16 oz. bottle.
80/90 And 85/140 Plus Gear Oils Formulated with anti-wear and anti-seize agents to lengthen component life and reduce power draw. 85/140 Plus Gear Oil is recommended for stopping leaks and reducing lash in worn gear sets. Part No.
75/90 And 75/140 Synthetic Gear Oils Pure Synthetic, non-foaming Gear Oils with additives to resist “squeezing out” under extreme pressure. Formulated specifically for high performance or heavy duty use. Part No.
Synthetic Oils A formulation of top quality synthetic bases and exclusive, high performance additives delivers extra protection, reduced drag, better fuel mileage and more horsepower for racing use. Sold in one quart bottles. Part No.
Description
LUC10179 .........Synthetic 0W-30 Oil LUC10082 .........Synthetic 5W-20 Oil LUC10049 .........Synthetic 5W-30 Oil LUC10050 .........Synthetic 10W-30 Oil LUC10054 .........Synthetic 20W-50 Oil
Description
LUC10042 .........85/140 Plus Gear Oil, 1 Quart Bottle LUC10043 .........80/90 Gear Oil, 1 Quart Bottle LUC10045 .........85/140 Plus Gear Oil, 1 Gallon Container LUC10046 .........80/90 Gear Oil, 1 Gallon Container
Description
LUC10047 .........75/90 Synthetic Gear Oil, 1 Quart Bottle LUC10048 .........75/90 Synthetic Gear Oil, 1 Gallon Container LUC10121 .........75/140 Synthetic Gear Oil, 1 Quart Bottle LUC10122 .........75/140 Synthetic Gear Oil, 1 Gallon Container
X-Tra Heavy Duty Grease LUC10330 Sheer, stable lubricant has exceptional extreme pressure and water resistance. Exceeds original equipment “Lube For Life” specifications. Sold in 1 lb. tubs.
Engine Break-In Oil Additive LUC10063
Red “N” Tacky Grease LUC10005
Specially formulated using an exclusive blend and increased levels of zinc, oil additive delivers added protection to camshafts, lifters and valve train components during critical break-in period. May also be used to prevent premature engine wear. Sold in 16 oz. bottle.
Red, tacky lithium 12-OH Grease, with rust and oxidation inhibitors and extreme pressure additives, will withstand heavy loads for long periods of time. Sold in a 14.5 oz. cartridge.
120
2010
113-128OW10.indd 120
11/10/09 9:57:03 AM
NEW VENDOR
Racer Series Small Block Chevy Crankshafts
Small Block Chevy Sledgehammer Crankshafts
Available in 3.480", and 3.750" stroke. Built to the same specs as the Pro Series, but without the contour work on the counterweights. The #1 and #4 rod journals are drilled to lighten, and enable balancing.
Non-twist 4340 forged steel crankshafts are 100% American made with edged and detailed pin arms and clearances for 5.7" rods. Machined to GM specs, cranks are nitrate heat treated, sonic cleaned, oil coated and are ideal for mild racing applications. Cranks use two-piece rear main seal.
Part No.
Stroke
Main
Rod Length
Pin Size
LNTAF117DN LNTAJ117DN
3.480" 3.750"
350 350
6.000" 6.000"
2.100" 2.100"
Pro Series Small Block Chevy Crankshafts With Contoured Wing Design Crankshafts are manufactured from 4340 steel. Rod journals are drilled with either 7/8" or 3/4" lightening holes to reduce rotating weight. The leading edges of the counterweights have Lunatiâ&#x20AC;&#x2122;s contoured wings to direct air and oil to the main bearings rather than the connecting rods. Available with 3.480" to 4.000" strokes. All crankshafts require chamfered bearings. Part No.
Stroke
Main
Rod Length
Pin Size
LNTAF111DN LNTAG111DN LNTAM111DN LNTAK211DN LNTAM211DN LNTAO211DN
3.480" 3.500" 3.875" 3.800" 3.875" 4.000"
350 350 350 400 400 400
6.000" 6.000" 6.000" 6.000" 6.000" 6.000"
2.100" 2.100" 2.100" 2.100" 2.100" 2.100"
Part No.
Stroke
Main
Rod Length
Pin Size
LNTAF115AN LNTAJ115AN
3.480" 3.750"
350 350
5.700" 5.700"
2.100" 2.100"
Lifters Horizontal and vertical bar design roller lifters are available for small block Chevrolets and Fords. Sold in sets of 16. Part No.
Type
LNT72400 Roller LNT72402 Roller
Description
SB Chevy, Horizontal Bar, Centered SB Chevy, Vertical Bar, Centered
Bill Tyler
Photo: Jim DenHamer
NEW VENDOR
Power Pak Domed Piston Kits
Performance Piston Ring Sets
Forged, domed pistons with radiused valve pockets are machined for 1.5mm top, 1.5mm second and 3.0mm oil rings. Sets of eight include wrist pins, locks and performance piston rings.
Mahle performance piston rings, developed with innovative computer simulation and development tools, include barrel-faced, plasma moly/ductile iron top rings, cast iron reverse twist second rings and conventional three-piece oil rings. Sets listed require file fitting.
Part No.
Bore
Stroke
Rod Length
Comp. Ht.
Dome Comp. Volume Ratio
Small Block Chevy MAHSBC550030D11 4.030" 3.48"/3.50" 5.700" 1.550" 11cc 13.0:1 MAHSBC250030D11 4.030" 3.48"/3.50" 6.000" 1.250" 11cc 13.0:1 MAHSBC125030D11 4.030" 3.48"/3.50" 6.125" 1.125" 11cc 13.0:1 MAHSBC425030D11 4.030" 3.750" 5.700" 1.425" 11cc 13.8:1 MAHSBC250060D11 4.060" 3.48"/3.50" 6.000" 1.250" 11cc 13.0:1 MAHSBC425125D04 4.125" 3.750" 5.700" 1.425" 4cc 13.0:1 MAHSBC125125D04 4.125" 3.750" 6.000" 1.125" 4cc 13.0:1 MAHSBC125155D04 4.155" 3.750" 6.000" 1.125" 4cc 13.0:1 MAHSBC125165D11 4.165" 3.750" 6.000" 1.125" 11cc 14.3:1 Notes: In Addition To The Rod And Stroke Combinations Listed With Each Part Number, Other Rod/Stroke Combinations May Work. Compression Ratios Are Based On A 64cc Combustion Chamber.
Part No.
Bore
MAH4030ML-043 MAH4035ML MAH4035MS MAH4035MS-15 MAH4035ML-043 MAH4040ML-043 MAH4045ML MAH4045MS-15 MAH4045ML-043 MAH4055ML-043 MAH4065ML-043 MAH4070ML-043 MAH4130MS-15 MAH4160MS-15 MAH4170MS-15
4.025" 4.030" 4.030" 4.030" 4.030" 4.035" 4.040" 4.040" 4.040" 4.050" 4.060" 4.065" 4.125" 4.155" 4.165"
Top Ring 2nd Ring
Oil Ring
Oil Ring Tension
.043" 1/16" 1/16" 1.5mm .043" .043" 1/16" 1.5mm .043" .043" .043" .043" 1.5mm 1.5mm 1.5mm
3.0mm 3/16" 3/16" 3.0mm 3.0mm 3.0mm 3/16" 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm 3.0mm
Low Low Standard Standard Low Low Low Standard Low Low Low Low Standard Standard Standard
2010
113-128OW10.indd 121
.043" 1/16" 1/16" 1.5mm .043" .043" 1/16" 1.5mm .043" .043" .043" .043" 1.5mm 1.5mm 1.5mm
121
11/10/09 9:57:39 AM
Suspension Components Swedged Aluminum Radius Rods
Steering Components Steering Arms
Swedged aluminum radius rods have 5/8" thread with knurling on each end.
Part No.
Length
1.00" O.D.
1.125" O.D.
1.250" O.D.
14" 16" 17" 18" 18.5" 19" 19.5" 20" 20.5" 21" 21.5" 22" 22.5" 23" 23.5" 24" 24.5" 25" 26.5" 27" 28" 29" 36" 37" 38" 39" 40" 41" 42" 43" 44" 45" 46" 47" 48" 49" 50"
MWASR-14 MWASR-16 MWASR-17 MWASR-18 – MWASR-19 – MWASR-20 MWASR-20.5 MWASR-21 MWASR-21.5 MWASR-22 MWASR-22.5 MWASR-23 MWASR-23.5 MWASR-24 MWASR-24.5 MWASR-25 – – – – – – – – – – – – – – – – – – –
– – – MWASR-18L MWASR-18.5L MWASR-19L MWASR-19.5L MWASR-20L MWASR-20.5L MWASR-21L MWASR-21.5L MWASR-22L MWASR-22.5L MWASR-23L MWASR-23.5L MWASR-24L – MWASR-25L MWASR-26.5L MWASR-27L MWASR-28L – – – – – – – – – – – – – – – –
– – – – – – – – – – – – – – – – – – – – MWASR125-28 MWASR125-29 MWASR125-36 MWASR125-37 MWASR125-38 MWASR125-39 MWASR125-40 MWASR125-41 MWASR125-42 MWASR125-43 MWASR125-44 MWASR125-45 MWASR125-46 MWASR125-47 MWASR125-48 MWASR125-49 MWASR125-50
Steering Gear Mount MWASGM-3F Mount is double hole with fuel shut-off mount.
Pitman Arm MWAPA-12A Pitman arm with 10 Degree Offset.
Drivetrain Components Driveshaft Part No.
Engine Components Throttle Linkage And Arms Part No.
Part No.
Description
MWATB30-975 ......... 4340 Torsion Bar, 975 MWATB30-1000 ....... 4340 Torsion Bar, 1000 MWATB30-1025 ....... 4340 Torsion Bar, 1025 MWATB30-1050 ....... 4340 Torsion Bar, 1050
MWATLK-1E
Chassis Components Front Axles Part No.
Description
MWAFA250-50
MWAFA250-50 ......... 50" Front Axle 2-1/2" MWAFA250-52 ......... 52" Front Axle 2-1/2"
Birdcage Bearings Part No. MWATA19L
MWADB-095 MWADB-120
“T-Bar” Torsion Bars
Description
MWATH-312 ............. Throttle Arm, 5/16" MWATH-375 ............. Throttle Arm, 3/8" MWATLK-1E.............. Throttle Linkage Kit, Eagle MWATLK-1M............. Throttle Linkage Kit, Maxim
Description
Torsion Arms MWALRTA17-3 ......... Left Rear Torsion Arm MWARRTA15-5 ......... Right Rear Torsion Arm MWATA17A ............... Front Torsion Arm, LW 17" With 10° Of Angle MWATA17L ............... Front Torsion Arm, LW 17" MWATA19L ............... Front Torsion Arm, LW 19" MWATA19OS............. Front Torsion Arm, “S”-Bend Torsion Stops MWATS-175 ............. Torsion Stop, 1.75" Split MWATS-200 ............. Torsion Stop, 2.00" Split Bronze Bushings MWATS-175 MWABB-095 ............. Torsion Bushing .095" Tube MWABB-120 ............. Torsion Bushing.120" Tubes Delrin® Plastic Bushings MWADB-095............. Delrin® Plastic Torsion Bushing, .095" MWADB-120............. Delrin® Plastic Torsion Bushing, .120"
Description
MWADS-30 ............... 30", 4340 Tubular Driveshaft
Torsion Arms, Stops And Bushings Part No.
Description
MWACSA-325L1A ..... Combo Steering Arm, 3.25", 1" Forward MWACSA-375L ......... Combo Steering Arm, 3.75", Left MWACSA-375R......... Combo Steering Arm, 3.75", Right MWASA-325 ............. Steering Arm, 3.25" MWASA-375 ............. Steering Arm, 3.75"
Description
MWA6014-2RS ......... Birdcage Bearing MWA6214-2RS ......... Large Birdcage Bearing
Jacobs Ladders Part No.
MWATJL-13.5
Description
MWATJL-13.5 ........... Tubular Jacobs Ladder, 13.5" MWATJL-13.625 ....... Tubular Jacobs Ladder, 13.625" MWATJL-14 .............. Tubular Jacobs Ladder, 14"
Front Wing Posts Part No.
MWAFWP-100
Description
MWAFWP-100 .......... Front Wing Post Straight, 1" MWAFWP-200 .......... Front Wing Post Bent, 1"
MWAFWP-200
Aluminum Shock Pin Kit MWASHP-100K Aluminum Jam Nuts Part No.
Description
MWAAJN-10L ........... 5/8" ID x 3/4" OD, Left Hand MWAAJN-10R ........... 5/8" ID x 3/4" OD, Right Hand
King Pin Bushings MWASB-859 122
2010
113-128OW10.indd 122
11/12/09 12:35:51 PM
Sprintmag® II And III Magneto Ignition Systems
Sprintmag/Supermag Transformer MAL28900A
Sprintmag II and III can be set with 5 advance curves: 0° (no advance), 14°, 20°, 24° or 28° (crankshaft) centrifugal advance for precision timing at all engine speeds. Race winning cam and breaker point assemblies are capable of exceeding 10,000 RPM. System has a positive locking screw-down distributor cap and brass contact terminals with spark plug-type ends for better wire retention. Pro Cap has the largest distributor cap, a counterbalanced rotor, and an interlocking adapter shield that prevents arcing and crossfire. For small block Chevy V8 engines.
Oil-cooled transformer is housed in a glassfilled, polyester case with brass contact terminals and a spark plug type coil wire terminal for positive coil wire attachment. Compatible with Sprintmag or Supermag magnetos.
Part No.
Description
MAL4359514.....Sprint Mag II, With Pro Cap, Without Tach Drive , 0° Locked Advance MAL4359524.....Sprint Mag II, With Stack Cap, Without Tach Drive, 0° Locked Advance MAL5358514.....Sprint Mag III, With Pro Cap, Without Tach Drive, 0° Locked Advance Sprintmag II And III Tune Up Parts MAL205M ..........8 Cyl. Stack Cap MAL25758M ......Contact Points MAL28005.........Condenser MAL28995.........Rotor For Stack Cap MAL29745.........8 Cyl. Pro Cap MAL29772.........Rotor For Pro Cap MAL29745
Sprint Wire® And Pro Wire® 8mm Silicone Spark Plug Wire Sets Sprint Wire® and Pro Wire® employ a CIF (Carbon Impregnated Fiber) core for exceptional spark energy. The silicone jackets repel water, oil, grease, and fuel. Universal V8 sets include 90° spark plug boots.
MAL205M
MAL766 Part No.
Magneto Static Timer Buzz Box MAL28355
MAL801
Description
MAL766.............Sprint Wire® 8MM Yellow Silicone Spark Plug Wire Set MAL801.............Pro Wire® 8MM Black Silicone Spark Plug Wire Set
Test breaker point opening and closing without starting the engine. Also tests impedance and resistance in primary wires and connections.
Fuel Logs
NEW VENDOR
“Y” Fittings
Lessens restriction and evens out fuel distribution. Part No.
Sleek “Y” Fittings with AN fittings ease plumbing and reduce weight. Part No.
Single
Double
MRFMP-6266 MRFMP-6286 MRFMP-6288 MRFMP-6208 MRFMP-6220
-6AN -8AN -8AN -10AN -12AN
-6AN -6AN -8AN -8AN -10AN
MRFMP-7600-03
Description
MRFMP-7600-02 ...... Double Port, -10AN Ports MRFMP-7600-03 ...... Triple Port, -10AN Ports
AN Flare-To-Port Adapters Part No.
AN Size
Port Size
MRFMP-3012 MRFMP-3022 MRFMP-3017 MRFMP-3019 MRFMP-3009
-6AN -6AN -8AN -10AN -12AN
-6AN -8AN -10AN -12AN -12AN
NEW VENDOR
Wear Caps Reduce valve tip wear with 4140 alloy steel, heat treated wear caps. Available in standard (16 per set), and non-rotating (8 per set). Part No.
Description
MAN42104-16 .......... 11/32" Wear Caps, Standard, 16 pcs. MAN42301-8 ............ 11/32" Wear Caps, Non-Rotating, 8 pcs.
Pushrod Length Checkers A must for all racers and engine builders. In just seconds, this tool can determine the exact length pushrod needed for a par ticular application. Complete with instructions. Part No.
Description
MAN42132 ........SB Chevy With 7/16" Studs MAN42137 ........SB Chevy With 3/8" Studs
Extreme Pressure Lube #3 MAN40177 Primarily used as a fastener lubricant, product is preferred by many top engine builders. 4 oz. tube.
Miracle And Magic Seal Epoxies Two-part epoxies bond to a wide variety of materials including iron and aluminum for repair of broken parts. Part No.
Description
MAN40180 ........Miracle Seal Epoxy, High Temperature, Exhaust Ports, Etc. MAN40187 ........Magic Seal Epoxy, Low Temperature, Intake Ports, Intake Manifolds, Etc.
2010
113-128OW10.indd 123
123
11/10/09 9:58:22 AM
NEW VENDOR
Severe Duty Valves
Valve Locks
Severe duty exhaust valves are made of XH-428 stainless steel which has double the tensile strength of imported valves at 1500°F. Intake valves, constructed of NK-844 stainless steel, have over 1000 times more fatigue strength than imported valves. Sold in sets of 8.
Heat treated, black oxide coated steel Locks are available in extra thick, Super 7° or traditional 10° for conventional or bead lock valves. Sets of 8 (16 pieces) or 16 (32 pieces).
Part No.
Type
Size
Stem
Installed Height
Part No.
Small Block Chevrolet 262-400 MAN11539-8# Exhaust 1.600" .3415" .100" Longer MAN11869-8S Exhaust 1.600" .3415" .100" Longer MAN11749-8 Exhaust 1.600" .3415" .100" Longer MAN11865-8 Exhaust 1.600" .3415" .200" Longer MAN11751-8S Exhaust 1.600" .3415" .200" Longer MAN11755-8S Exhaust 1.600" .3415" .400" Longer MAN11513-8 Exhaust 1.600" .3415" .500" Longer MAN11763-8 Exhaust 1.625" .3415" .600" Longer MAN11886-8 Intake 1.940" .3415" .100" Longer MAN11826-8 Intake 2.020" .3415" .100" Longer MAN11846-8 Intake 2.055" .3415" .100" Longer MAN11818-8 Intake 2.080" .3415" Stock MAN11844-8 Intake 2.080" .3415" .100" Longer MAN11858-8 Intake 2.080" .3415" .200" Longer # Valve has 10° underhead angle. SValue has 15° underhead angle
Super 7° MAN13080-16 MAN13081-16 MAN13083-16 MAN13084-16 10° MAN13151-8 MAN13152-8 MAN13161-8 MAN13162-8 MAN13194-16 MAN13198-16
MAN221432-16 MAN221440P-16 MAN221441P-16 MAN221442-16 MAN221443-16 MAN221444-16
Application
Late Model, Flat Tappet Oval Track, Roller Oval Track, Roller Oval Track, Roller BGN, WoO, LM BGN, WoO, LM
O.D./I.D.
Length
Open Pressure
Coil Bind
1.530”/.750” .630” 162@1.900” 425@1.300” 1.200” 1.570”/.760” 1.570”/.750” 1.560”/.812” 1.580”/.832” 1.610”/.842”
.700” .730” .750” .730” .750”
255@2.000” 280@2.030” 260@2.000” 235@1.950” 235@2.050”
629@1.300” 700@1.300” 660@1.250” 610@1.250” 645@1.300”
1.190” 1.215” 1.200” 1.170” 1.220”
10° Titanium Retainers Manley’s 6AL 4V titanium 10° retainers have the durability needed for racing engines. Sold in sets of 16. Part No.
Spring Type
Height
MAN23640-16 MAN23644-16 MAN23648-16 MAN23650-16 MAN23654-16 MAN23655-16 MAN23658-16 MAN23661-16
Double Double Double Double Double Double Double Double
+.100" 1.625" 1.500" Std. 1.550" 1.500" +.100" 1.580"/1.610" 1.500" +.100" 1.550" 1.500" Std. 1.625" 1.500" +.100" 1.625" 1.500" Std. 1.550" 1.500" +.100" 1.550" 1.500"
Robert Ballou
124
Spring O.D.
A
Dimensions B C
1.175" 1.140" 1.150" 1.140" 1.175" 1.175" 1.105" 1.120"
.850" .740" .825" .740" .765" .765" .710" .705"
Lock Style
5/16" Valve Locks 11/32" Valve Locks 11/32" Valve Locks 11/32" Valve Locks
Standard .050" Less Standard .050" More
Conventional Conventional Conventional Conventional
5/16" Valve Locks 5/16" Valve Locks 11/32" Valve Locks 11/32" Valve Locks 11/32" Valve Locks 11/32" Valve Locks
Standard .050" More Standard .050" More Standard .050" More
Bead Loc Bead Loc Bead Loc Bead Loc Conventional Conventional
Heat treated, 4130 chrome moly pushrods have swaged ends and are black oxide finished for corrosion protection. Available in 5/16" (.080"wall), 3/8" (.080" and .120"wall) and 7/16" (.125" wall) diameters. The 5/16" pushrods are available individually and in sets of 16; 3/8" pushrods are available individually and in sets of 8; and 7/16" pushrods are sold individually. For singles, replace the -16 or -8 with a -1.
Put an end to spring degradation. NexTek springs are specially processed from chrome silicon that undergoes winding, thermal treating and finishing processes prior to shipment. Spring I.D.’s are fully chamfered for retainer clearance. Sold in sets of 16.
Part No.
Installed Height
Chrome Moly Pushrods
NexTek Series Oval Track Valve Springs
Max. Valve Seat Lift Pressure
Description
D
– – – – – – – –
5/16" Dia. .080" Wall Part No.
7.000" MAN25700-16 7.050" MAN25727-16 7.100" MAN25729-16 7.150" MAN25741-16 7.200" MAN25733-16 7.250" MAN25734-16 7.300" MAN25730-16 7.350" MAN25751-16 7.400" MAN25735-16 7.450" MAN25736-16 7.500" MAN25754-16 7.550" MAN25755-16 7.600" MAN25767-16 7.650" MAN25768-16 7.700" MAN25772-16 7.750" MAN25707-16 7.794" MAN25785-16† 7.800" MAN25709-16 7.850" MAN25711-16 7.900" MAN25712-16 7.950" MAN25715-16 8.000" MAN25716-16 8.050" MAN25721-16 8.100" MAN25722-16 8.150" MAN25744-16 8.200" MAN25745-16 8.250" MAN25701-16 8.275" MAN25753-16 8.380" – 8.400" MAN25706-16 8.425" MAN25764-16 8.450" MAN25708-16 8.500" MAN25774-16 8.550" MAN25710-16 8.600" MAN25718-16 8.650" MAN25724-16 8.680" – 8.700" MAN25799-16 8.750" MAN25738-16 8.800" MAN25742-16 8.850" MAN25746-16 8.900" MAN25758-16 8.950" MAN25757-16 9.000" – † 1010 Material
3/8" Dia. .080" Wall Part No.
3/8" Dia. .120" Wall Part No.
7/16" Dia. .125" Wall Part No.
– MAN25319-1 – – – – – – – – – – – – – – – – – – – – – – MAN25822-8 – – MAN25836-8 – – MAN25854-8 – – MAN25818-8 – – MAN25876-8 – – – – – MAN25828-8 – – MAN25832-8 – – – – – MAN25787-8 – – MAN25878-8 – – MAN25788-8 – – MAN25814-8 – – MAN25816-8 MAN25339-1 – MAN25821-8 MAN25340-1 – MAN25810-8 MAN25341-1 – MAN25815-8 MAN25342-1 – MAN25820-8 MAN25343-1 MAN25040-1 MAN25825-8 MAN25344-1 MAN25041-1 – – – MAN25769-8 – – MAN25840-8 MAN25347-1 MAN25045-1 – – – MAN25845-8 MAN25348-1 MAN25046-1 MAN25850-8 MAN25349-1 MAN25047-1 MAN25855-8 MAN25350-1 MAN25048-1 MAN25860-8 MAN25351-1 MAN25049-1 MAN25865-8 MAN25352-1 MAN25050-1 MAN25797-8 – MAN25051-1 MAN25870-8 MAN25353-1 MAN25052-1 MAN25875-8 MAN25354-1 MAN25053-1 MAN25880-8 MAN25355-1 MAN25054-1 MAN25885-8 MAN25356-1 MAN25055-1 MAN25890-8 MAN25357-1 MAN25056-1 MAN25890-8 MAN25358-1 MAN25057-1 MAN25900-8 MAN25359-1 MAN25058-1
Photo: Jim DenHamer
2010
113-128OW10.indd 124
11/10/09 9:58:38 AM
M-Pact Gloves
The Original Gloves
For tire changing and jacking, the Mechanix Wear M-Pact Gloves have double-layers with padded palms, reinforced thumb and index finger panels and Neoprene-padded knuckle panels. Machine washable.
Machine washable stretch knit gloves have padded Spandex tops, elastic cuffs, hook-and-loop closures, seamless, multi-panel fingertips and hidden seams to improve sensitivity and durability. Size
Black Part No.
Red Part No.
Blue Part No.
SM MED LG XL XXL
AXOMG-05-008 AXOMG-05-009 AXOMG-05-010 AXOMG-05-011 AXOMG-05-012
AXOMG-02-008 AXOMG-02-009 AXOMG-02-010 AXOMG-02-011 AXOMG-02-012
AXOMG-03-008 AXOMG-03-009 AXOMG-03-010 AXOMG-03-011 AXOMG-03-012
Size
Yellow Part No.
Orange Part No.
Green Part No.
SM MED LG XL XXL
AXOMG-01-008 AXOMG-01-009 AXOMG-01-010 AXOMG-01-011 AXOMG-01-012
AXOMG-09-008 AXOMG-09-009 AXOMG-09-010 AXOMG-09-011 AXOMG-09-012
AXOMG-06-008 AXOMG-06-009 AXOMG-06-010 AXOMG-06-011 AXOMG-06-012
Size
Stealth Part No.
Camo Part No.
SM MED LG XL XXL
AXOMG-55-008 AXOMG-55-009 AXOMG-55-010 AXOMG-55-011 AXOMG-55-012
– AXOMG-71-009 AXOMG-71-010 AXOMG-71-011 AXOMG-71-012
Black Part No.
Red Part No.
Blue Part No.
Yellow Part No.
SM MED LG XL XXL
AXOMMP05-008 AXOMMP05-009 AXOMMP05-010 AXOMMP05-011 AXOMMP05-012
AXOMMP02-008 AXOMMP02-009 AXOMMP02-010 AXOMMP02-011 AXOMMP02-012
AXOMMP03-008 AXOMMP03-009 AXOMMP03-010 AXOMMP03-011 AXOMMP03-012
AXOMMP01-008 AXOMMP01-009 AXOMMP01-010 AXOMMP01-011 AXOMMP01-012
M-Pact 2 Gloves The tough M-Pact glove improved with super tacky Clarino Zeus™ thumbs and fingertips. Double-layer Clarino palms with EVA padding dampen heavy impact and vibrations and padded Kevlar palm heels protect from abrasions. Variety of colors and sizes. Size
Black Part No.
Red Part No.
Blue Part No.
SM MED LG XL XXL
AXOMP2-05-008 AXOMP2-05-009 AXOMP2-05-010 AXOMP2-05-011 AXOMP2-05-012
AXOMP2-02-008 AXOMP2-02-009 AXOMP2-02-010 AXOMP2-02-011 AXOMP2-02-012
AXOMP2-03-008 AXOMP2-03-009 AXOMP2-03-010 AXOMP2-03-011 AXOMP2-03-012
Fabricator Gloves Oversize, 100% leather gloves have cowhide panels on the heel, inside and outside edges of the palm and are ideal for metal fabrication, body work and welding.
The Original 0.5 Gloves NEW!
Part No.
Similar to The Original Glove, but with a thinner, 0.5mm dimpled Clarino Septon for improved feel and dexterity. Offered in black only. Part No.
Size
Size
AXOMFG-05-009 ...... Medium AXOMFG-05-010 ...... Large AXOMFG-05-011 ...... X Large AXOMFG-05-012 ...... XX Large
Size
AXOHMG-05-009 ..... Medium AXOHMG-05-010 ...... Large AXOHMG-05-011 ...... X-Large AXOHMG-05-012 ...... XX-Large
Kevlar Heat Sleeves AXOMHS-05-500 Extra long, snug sleeves are made of 100% woven Kevlar to protect arms from heat and hot lubricants. Use with gloves. Sold in pairs.
FastFit Gloves NEW!
Apron AXOMG-05-600 The Mechanix Apron offers greater convenience and protection. One size fits all.
All-purpose gloves have angled elastic cuffs for quick, easy entry. Lycra insert panels between fingers and Clarino MWX-2 synthetic leather palm provide protection, comfort and exceptional grip. Size
Yellow Part No.
Red Part No.
Blue Part No.
Black Part No.
SM MED LG XL XXL
AXOMFF-01-008 AXOMFF-01-009 AXOMFF-01-010 AXOMFF-01-011 AXOMFF-01-012
AXOMFF-02-008 AXOMFF-02-009 AXOMFF-02-010 AXOMFF-02-011 AXOMFF-02-012
AXOMFF-03-008 AXOMFF-03-009 AXOMFF-03-010 AXOMFF-03-011 AXOMFF-03-012
AXOMFF-05-008 AXOMFF-05-009 AXOMFF-05-010 AXOMFF-05-011 AXOMFF-05-012 Shane Hmiel
Photo: FSC Pictorials
2010
113-128OW10.indd 125
125
11/10/09 9:58:45 AM
Titanium Bolts, Studs And Nuts Fasteners are made with aircraft grade titanium alloy. Mettec bolts have forged heads for superior strength. The threads are then rolled to produce greater fatigue strength and reduce galling. Bolts exceed minimum ultimate tensile strength of 120,000 psi. All fasteners are sold each unless specified. Length
10-32
1/4"-20
1/4"-28
5/16"-18
5/16"-24
3/8"-24
3/8"-16
7/16"-20
MTTT4NC03120750 7/16"-14
1/2"-20
1/2" – MTTT4NC02500500 MTTT4NF02500500 – – – – – – – 5/8" – MTTT4NCO2500625 MTTT4NF02500625 – – – – – – – MTTT4NF02500750 MTTT4NC03120750 MTTT4NF03120750 3/4" – – – – – – – MTTT4NF02500875 7/8" – – – MTTT4NF03750875 – – – – 1" – – – – MTTT6NF03121000 MTTT4NF03751000 MTTT4NC03751000 – – – 1-1/4" – – – – – MTTT4NF03751250 MTTT4NC3751250F MTTT4NF04371250 – MTTT4NF05001250 1-3/8" – – – – – – MTTT4NF05001375 1-1/2" MTTT410321500 – MTTT4NF02501500 MTTT4NC03121500 – MTTT4NF03751500 MTTT4NC3751500F MTTT4NF04371500 MTTT4NC04371500 MTTT4NF05001500 1-3/4" – – – – – MTTT4NF03751750 – MTTT4NF04371750 MTTT4NC04371750 MTTT4NF05001750 2" – – – MTTT4NF03122000 – MTTT4NF03752000 – – MTTT4NC04372000 MTTT4NF05002000 MTTT4NF05002500 2-1/2" – – – – – MTTT4NF03752500 – – – MTTT4NF05002750 2-3/4" – – – – – – – – – MTTT4NF05003000 3" – – – – – – – – – MTTT4NF05003500 3-1/2" – – – – – – – – –
Miscellaneous Bolts, Studs And Nuts
Jacob Ladder Quick Pin Kits
Part No.
Titanium kits with 3/8” or 1/2" pin for bird cage heims. When using a 3/8" pin with a 1/2" heim a spacer is needed in the heim. 1/2" pin is drilled for weight reduction.
Description
MTTT12NC375125B .............Wide 5 Front Wheel Studs .............................................3/8" x 16 x 1-1/4" Star Hd. Bullet Nose MTTT4FNC3751250..............Wide 5 Front Wheel Studs .............................................3/8" x 16 x 1-1/4" Flush Hd. Bullet Nose MTTNUTHF375-16 ................Titanium Hex Flange Wheel Nut 3/8" x 16 MTTSTUD375X1125 .............Header Stud, 3/8" Dia. x 1.125" L. NEW! MTTSTUD375X1500 .............Distributor Stud, 3/8" Dia. x 1.500" L. NEW! MTTSTUD375x1750..............Torque Tube Stud 3/8" x 1-3/4" MTTSTUD375x2000..............Torque Tube Stud 3/8" x 2" MTTTD502............................Titanium Drag Link And Tie Rod One Nut Stud MTTTD503............................Titanium Rear Shock Lower Arm One Nut Stud MTTSD502 ...........................Steel Drag Link And Tie Rod One Nut Stud MTTSD503 ...........................Steel Rear Shock Lower Arm One Nut Stud MTTT6NF4370875F ..............U-Joint Bolts 7/16" x 7/8" 12-Pt. 1/2" Wrench MTTT4FNF4371750 ..............Front Steer Arm Bolt 7/16" x 1-3/4" Flush Head (Midget) MTTT4FNF5002000 ..............Front Steer Arm Bolt 1/2" x 2" Flush Head (Sprint) MTTT4FNF5001000 ..............Front Brake Rotor Bolt 1/2" x 1" Flush Head
Complete Bolt And Nut Kits Kits contain all bolts and nuts for the following chassis. Part No.
Description
MTTMBK.....Maxim Chassis Kit MTTEBK......Eagle Chassis Kit
Part No
Description
MTTKT515 .........3/8" Pin, 3 Per Kit MTTKT520 .........1/2" Pin, 3 Per Kit
Steel Torsion Bar Stop MTTSTOPST-7 Steel torsion bar stop is 1-1/8" x 48-Spline, 1-3/4 bar split.
Anaerobic Surface Conditioner MTTMETASC10-118 Mettec recommends permabond anaerobic surface Conditioner when installing your titanium fasteners. Surface conditioner is needed on titanium so that the thread locker will bond to titanium surfaces.
Moly Paste 1/2 Oz. MTTMOLY.5OZ Paste reduces galling and seizing of titanium threads.
NEW VENDOR
Digital Infrared Thermometers Check track surface temperatures, tire temperatures, brake rotors, headers and exhaust temperatures with MicroTemp. New technology, better quality control and new manufacturing methods yield an affordable price and an all around better product. Choose regular or pocket sized models. Covered by a 90-day manufacturer's warranty. Part No.
Description
MITMT-100 ........Pocket Size Infrared Pyrometer, -67°F to 230°F MITMT-250 ........Pocket Size Infrared Pyrometer, -67°F to 482°F MITMT-EXP ........Digital Infrared Pyrometer, -58°F to 752°F MITMT-PRO .......Professional Infrared Pyrometer, -76°F to 932°F
126
MITMT-100
MITMT-PRO
MITMT-250
2010
113-128OW10.indd 126
11/10/09 9:59:19 AM
Wet Sump Small Block Chevy Oil Pans “Power Kickout Series”
Oiling System Components Oil Control Kit NEW!
Kicked out sump, 7-1/8" deep, seven quart capacity (plus filter) pans are well suited for GM Metric “A” body chassis in street stock classes. Steel pans are fully baffled, include five trap doors and removable windage trays. Compatible with strokes up to 3.800".
Oil Control Kit for small block Chevrolet engines converts virtually any stock type oil pan to a competition pan. Includes Teflon-coated louvered windage tray, crankshaft scraper and rear main oil cap baffle. Some trimming may be required for installation. Components are also available separately.
Part No.
Description
MOR21312 ........7-1/8" Deep Steel Pan, Fits pre-1980 Blocks with Driver’s Side Dipstick or 1980-85 Blocks with Passenger’s Side Dipstick MOR21313 ........7-1/8" Deep Steel Pan, Fits 1986-Up Blocks with 1-pc. Rear Main Seal MOR21314 ........6-1/2" Deep Steel Pan, Fits Pre-1980 Blocks Or 1980-85 Blocks With Passenger’s Side Dipstick NEW! Pickup Required: MOR24101 ........When Using Melling MELM10555 Oil Pumps MOR24103 ........When Using Std. Volume, MOR22101 or MEL10553 Oil Pumps MOR24104 ........When Using High Volume, MOR22111 or MEL10550 Oil Pumps MOR24314 ........When Using MOR22101 or M55 For MOR21314 Only. NEW!
“Sportsman Series” NEW! 7-1/8" deep oil pan holds seven quarts (plus filter), kicked-out sump pan has removable, louvered windage tray and fully baffled sump with five trap doors. Pan is compatible with strokes up to 3.800". Part No.
Description
Part No.
Description
MOR23035 ........Complete Oil Control Kit MOR23000 ........Rear Main Cap Baffle MOR23020 ........Louvered Windage Tray MOR25800 ........Crankshaft Wiper
Uni-Directional Windage Tray Screen MOR22912 Tray directs oil to sump area and increases horsepower by preventing oil from splashing back onto rotating assembly. 23" X 16" screen must be trimmed for each application.
Oil Pump Stud Kit MOR38150 NEW!
MOR21318 ........Steel Pan, Pre-'80 Blocks with Drivers Side Dipstick or 1980-85 Blocks with Passenger’s Side Dipstick Pickup Required: MOR24101 ........When Using Melling MELM10555 Oil Pumps MOR24103 ........When Using Std. Volume, MOR22101 or MEL10553 Oil Pumps MOR24104 ........When Using High Volume, MOR22111 or MEL10550 Oil Pumps MOR24318 ........When Using MELM155HV Oil Pump
Oil Pump Stud (7/16" x 3-3/16") is made of 4130 steel and fits small or big block and 90° V-6 Chevy engines. Includes stud, self-locking nut and hardened, ground washer.
Dry Sump Small Block Chevy Oil Pans “Sportsman Series” 3-Stage Oil Pans
Post-race inspections of the crankshaft and connecting rods, without removing the oil pan are easy with Moroso’s Oil Pan Inspection Kit. The easily installed kit includes a steel fitting to be welded to side of the oil pan, and a removable lightweight aluminum inspection plug that is 1" NPT thread.
Pans have full length, uni-directional windage trays, crank scrapers and two slotted -12AN pickup tubes. Pans are 4-1/2" deep. Part No.
Description
MOR21511 ........Passenger’s Side Pickups, Fits Pre-'80 Blocks with Driver’s Side Dipstick MOR21521 ........Driver’s Side Pickups, Fits Pre-’80 Blocks with Driver’s Side Dipstick
“Professional Series” Aluminum 4-Stage Oil Pans Fabricated aluminum pan is 6-1/2" deep with expanded metal windage screens with multiple scrapers. Radial, full length kickouts, billet end caps, inspection plug and three -12AN female fittings on the right side are standard. Available to fit stock small block Chevy and Dart Iron Eagle blocks. Part No.
Oil Pan Inspection Plug Kit MOR23970
Oil Restrictor Kits NEW! Reduce flow to rocker arm assemblies, leaving more oil available for rod and main bearings. Power-robbing windage is reduced by lessening the volume of oil passing by the rotating assembly on its return to the pan. Not for use with hydraulic lifters. Part No.
Description
MOR22000 ........SB and BB Chevys, .060" Orifice Dia., Oil Delivery Holes At Rear Cam Bearing Must Be Tapped To Install, 2 Per Package MOR22010 ........SB and BB Chevys, .0625" Orifice Dia., Screws Into Lifter Gallery Cleaning Plug Holes At Back Of Block, 2 Per Package MOR22016 ........New GM Blocks w/Oil Lifter Galley Bosses, Flush w/Bellhousing Face, 2 Per Package MOR22045 ........SB Ford 302-351W, 7 Per Package
Description
MOR21547 ........Dart Iron Eagle Pan MOR21566 ........Small Block Chevy Pan NEW!
2010
113-128OW10.indd 127
127
11/10/09 9:59:41 AM
Oil Return Screen Kits MOR25000
Oil Filter Block-Off Plate MOR23840 NEW!
Screen retains debris in the lifter valley area and includes eight plugs to plug the oil return holes in the lifter valley above the cam. This redirects the oil to the front and rear return galleries and then directly to the sump area, instead of dumping it on the crankshaft causing increased windage and lost horsepower. Fits SB Chevy.
Often used on dry sump oil system installations, Plate has a 1/2" NPT port for input pressure line and fits all small and big block Chevy (except Gen. V/VI or those with bolt hole at center of pad).
In-Line Oil Filter Filters are a necessity in many scavenge line locations to prevent metal chips from entering dry sump pumps, rear end pumps, and other oiling system components. Lightweight anodized aluminum filters are easy to disassemble and clean.
Racing Oil Filters
Part No.
Rated at 27 microns and provide less pressure drop, more flow, less oil bypass, and maximum oil filtration.
MOR23850 ........5/8,"-10 Fittings MOR23860 ........3/4,"-12 Fittings MOR23870 ........1/2,"-8 Fittings
Part No.
Description
MOR23850
Description
MOR22459 ........Chevy Short Style Oil Filter, 4-9/32" Tall MOR22460 ........Chevy Tall Style Oil Filter, 5-1/4" Tall MOR22465 ........Remote Mount, Replaces Fram HP6, 6-1/4" Tall MOR22470 ........Ford/Chrysler Tall Style Oil Filter, 5-1/4" Tall
Engine Saver Pre-Filter Screen MOR23845 Locates on top of spin-on oil filters to trap debris before it enters the filter element, providing an early warning for engine problems. 304 stainless steel, filtration-grade screen traps contaminants down to the 280 micron range without affecting oil flow or pressure. Crimped rings on inside and outside diameters increase strength and durability. Fits small block, big block and 90° V6 Chevys.
Oil Bypass Eliminator MOR23775 NEW! Machined, billet aluminum adapter eliminates the bypass found in OEM small block Chevy filter adapters, preventing unfiltered oil from entering the engine. Adapter features a single inlet and accepts spin-on, stock type oil filters.
Oil Filter Adapters NEW! Adapters lower filter 1-1/2" and accept accumulators, external or dry sump pumps, or remote oil coolers. Will fit small block Chevys without modification. Adapters use 1/2" NPT inlets and outlets. Includes instructions, mounting bolts and O-rings. Part No.
Description
MOR23690 ........Adapter For Plumbing Accumulators and External or Dry Sump Pumps MOR23692 ........Adapter For Plumbing Remote Oil Coolers
Oil Filter Bypass MOR23770 NEW! Oil Filter Bypass fits all small block Chevy V8’s. For use with wet sump oil systems when remote oil filters or coolers are used. Bypasses are cast from aluminum with 1/2" NPT inlet and outlet. Includes gaskets and fasteners.
Billet Oil Filter Bypass Plate MOR23782
Filter Fitting MOR23961 -12AN fittings trap metal chips in the oil before they reach the pump, engine, or rear end. Fits dry sump tanks, oil pans, rear end filler/breathers, etc., and is easily removed for cleaning. Screen is 304 stainless steel, 16 mesh wire, .015" dia. Sold individually.
Oil Preheaters Moroso Oil Preheaters actually heat the oil, without scorching or boiling. 212 watts of power raises temperature of 12 quarts of oil 60°F. in approximately 30 minutes. Element is 4-1/2" long and screws into place with 1" NPT fitting. 120 volt rated unit includes detachable 7' cord. Part No.
Description
MOR23980 ........Oil Preheater With Aluminum Fitting MOR23990 ........Oil Preheater With Steel Fitting
External Heating Pads Pads adhere to oil tanks to preheat engine oil. Etched foil distributes heat evenly and silicone outer shell resists oil and dirt. Includes 18 AWG electrical cord with plug for 110 volt AC outlets. Part No.
Description
MOR23995 ........6" x 12" 360 Watt Pad, Hook and Spring Attachment MOR23996 ........5" x 7" 400 Watt Self Adhesive Pad, Heats From 66 to 160°F In 25 Min. MOR23997 ........2" x 15" Self Adhesive Pad, Perfect For Narrow Areas
Die Cast Aluminum Valve Covers For SB Chevy 262-400 MOR68385 Tall thin wall aluminum covers are about half the weight of standard cast versions. The casting process yields a blemish free surface with no porosity. Valve covers are hand polished and sold in pairs with crossover breather tube kit.
Plate is necessary when using a remote oil filter or returning oil from dry sump systems. Plate fits small block Chevy and accepts 1/2" NPT fittings. O-rings are captured in the plate for a tight seal against the block. Includes mounting hardware and O-rings.
128
2010
113-128OW10.indd 128
11/10/09 9:59:59 AM
Valve Cover Stud Kits
Ultra 40 Race Spark Plug Wire Sets
Studs ease valve cover installation or removal and prevent loosening caused by vibrations. “Bullet Nose” studs make it easier to start threads on mounting nuts. Sold in sets of eight with 1/4"-20 studs, nylon insert lock nuts and washers.
One of the most powerful, RFI/EMI-proof spark plug wire sets available, with just 40 ohms of resistance per foot. Kevlar core is four times stronger than conventional Aramid fiber cores. Available in universal or custom sets. Custom fit wire sets include Ultra 40 insulated wire sleeve.
Part No.
Part No.
Description
MOR68820 ........Valve Cover Stud Kit, 1/4"-20 x 1-3/4" MOR68830 ........“Bullet Nose” Valve Cover Stud Kit, 1/4"-20 x 1-1/2"
Perm-Align Valve Cover Gaskets Durable gaskets won’t leak, blow out or get sucked in. Gaskets are 3/16" thick and made of 40 durometer rubber, vulcanized to a rigid steel frame to provide years of dependable service. Two per package. Part No.
Description
MOR93020 ........SB Chevy MOR93021 ........SB Chevy with12°,13.5°/15°/16°/18°, Brodix /Dart/Edelbrock/All-Pro Heads
Crossover Breather Tube Kit MOR68762 NEW!
Description
Universal Wire Sets * MOR73800 ........90° Universal Wire Set Custom Fit Wire Sets MOR27001 ........SBC Under Valve Covers Wire Set, 90° Plug, HEI, Front of Motor Routing NEW! MOR73602 ........SBC Over Valve Covers Wire Set, 90° Plug, HEI MOR73607 ........SBC Under Headers Wire Set, 90° Plug, HEI *Universal wire sets do not include wire sleeve.
Blue Max® Spiral Core Spark Plug Wire Sets Independent testing confirmed that Blue Max spark plug wire sets have more spark energy, better EMI suppression and higher dielectric strength than any other wires. Spiral core wire sets are compatible with modern on-board electronics. Available in universal and custom fits sets with wire sleeving. Distributor end of universal sets must be cut to proper length and have the boots and terminals installed.
Engineered for small block Chevy powered race cars, kit includes components to build an effective crankcase breather system. Mounting hardware and aluminum weld-in bungs included.
Custom Fit Wire Set Universal Wire Set
Weld-In Filtered Breather Kit
Part No.
Part No.
Description
Universal Wire Sets (HEI/Non HEI) MOR73225 ........Blue, 90° Spark Plug Boots/Terminals MOR73217 ........Yellow, 90° Spark Plug Boots/Terminals MOR73219 ........Red, 90° Spark Plug Boots/Terminals MOR73231 ........Black, 90° Spark Plug Boots/Terminals Custom Fit Wire Sets MOR72402 ........SB Chevy w/HEI, Over Valve Cover, 90° Plug Terminals MOR72407 ........SB Chevy, Under Header, HEI, 90° Plug Terminals
Includes two internally baffled breather tubes which must be welded to valve covers. Description
MOR68760 ........Steel Breather Tubes Only, Pair MOR68800 ........Aluminum Weld-In Filtered Breather Kit
Filtered Valve Cover Breathers Hooded and non-hooded breathers are available in two styles, clamp-on or push-in. The steel housings on all breathers are chrome plated. Elements must be oiled before use and are easily cleaned with soap and water. Elements must be dry before re-oiling. Sold individually.
Blue Max® Spiral Core Coil Wire Kit MOR73235 Coil wires should be replaced regularly. Kit includes 3' Blue Max spiral core 8mm suppression wire, wire stripping tool and 13-piece boot and terminal kit.
Insulated Wire Sleeve Part No.
MOR68811 Description
MOR68813
MOR68815
MOR68811 ........Hooded Clamp-On Type, Fits 1-3/8" Tube MOR68812 ........Hooded Clamp-On Type, Fits 1-1/2" Tube MOR68813 ........Hooded Push-In Type, For Covers With Punched Hole MOR68815 ........Non-Hooded Clamp-On Type, Fits 1-3/8" Tube MOR68816 ........Non-Hooded Clamp-On Type, Fits 1-1/2" Tube MOR68817 ........Non-Hooded Push-In, For Covers With Punched Hole NOTE: The hooded filtered breathers should be installed with the hood facing the fan so that no grit can be blown into the element.
Extend spark plug wire life and insulate against exhaust header heat. For best results, the sleeve should cover the entire wire from plug boot to distributor boot and then be sealed with MOR72030 or MOR72031 Shrink Sleeve. Packaged in 25' lengths. Part No.
Description
MOR72000 ........7-8mm, Blue MOR72002 ........7-8mm, Red MOR72011 ........Ultra 40, Blue
2010
129-144OW10.indd 129
129
11/10/09 10:05:19 AM
Shrink Sleeve Completely seal spark plug and distributor boots and spark plug wire sleeve. Packaged 18 sleeves per set. Part No.
Description
MOR72030 ........Blue MOR72031 ........Black
Thru Panel Battery Connector MOR74145 NEW! Used wherever a battery cable, or other large diameter, high amperage cable, passes through a firewall or similar panel. Fits through 1-1/4" hole and is held solidly by included spanner kit. Use MOR74170 Battery Cable Remote Fitting End Kit to complete installation.
Numbered Shrink Sleeves MOR72020
Battery Quick-Connect Plugs NEW!
Sleeves simplify spark plug wire identification and installation. Numbered from 1 through 8, sets include two of each number to identify both ends of the spark plug wires.
Useful for race cars, tow vehicles, winches, etc., the kit includes male and female plugs, and terminals to connect the vehicle to a battery charger. Available in large or mini- size. Part No.
High Temp Spark Plug Boot Sleeves NEW! Non-flammable sleeves provide protection up to 1,200°F. Sleeves are 1" I.D. x 5-3/4" long and sold in two-packs. Part No.
Description
MOR71992 ........Blue MOR71993 ........Red MOR71994 ........Black
Spark Plug Wire Separator Kits NEW! Separators accommodate 7 to 9mm wires, with or without sleeves. Plastic separators prevent crossfiring and can be used over valve covers or under headers. Easily snap into place to hold wires securely. Packaged six to a card (2 each of 2, 3, and 4-hole separators). Part No.
Description
MOR72160 ........Blue MOR72161 ........Red MOR72162 ........Yellow MOR72163 ........Black
Spark Plug Indexing Washers For use on all 14mm spark plugs with 5/8" hex. Use with Indexer MOR62160. There are three thicknesses in each package, one of which will correct the electrode placement on any plug, simplifying the timeconsuming task of spark plug indexing. Washers are stamped from copper for perfect sealing and heat transfer. Thirty to a card. Part No.
Description
MOR74200
Description
MOR74200 ........Large Battery Quick Disconnect Plug MOR74201 ........Mini-Battery Quick Disconnect Plug, Up To 50 Amps Using #6 Wire
MOR74201
Quick-Disconnect Flush Mount Battery Cable Connectors MOR74155 NEW! Use with heavy duty battery cables and route through firewalls or body panels. Black and red color-coded connectors are quick-release style with half-turn locks. Sold in pairs.
Push Button Starter Switch MOR74120 NEW! Waterproof and dust proof push button starter switch has neoprene cap for in-car or underhood mounting. 35 amp rated at 12 Volts.
Toggle Switches NEW! High quality toggle switches, in traditional on/off, single throw or momentary designs, include on/off faceplates and are rated at 20 amps lamp load and 35 amps inductive load. Momentary switch is ideal for use as a starter switch. Part No.
Description
MOR74124 ........Momentary Toggle Switch, Long 1-1/2" Handle MOR74125 ........On/Off Toggle Switch, Long 1-1/2" Handle MOR74126 ........On/Off Toggle Switch, Short 11/16" Handle
MOR74126
MOR71900 ........Taper Seat, .010", .021", .032" MOR71910 ........Flat Seat, .040", .050", .064"
Spark Plug Indexer MOR62160 Modern, high-compression racing engines require indexing of spark plugs to prevent contact between piston dome and the plugâ&#x20AC;&#x2122;s electrode and for optimum direction of spark travel within combustion chamber. Designed for both flat and taper-seat 14mm spark plugs. Black-anodized so that marks can be placed on the outer surface for checking subsequent sets of plugs.
Benic Ent./Dave Darland
130
Photo: Jim DenHamer
2010
129-144OW10.indd 130
11/10/09 10:05:37 AM
Quick Fasteners
Fastener Springs
Cadmium-plated Fasteners join body panels, doors, front MOR71350 MOR71290 ends, fiberglass-to-metal, metalto-metal, etc. Available in three lengths and two head styles. Use with MOR71400, 71410, 71420, 71425 or 71430 fastener spring. Ten per package.
Use with both the flat and oval head fasteners. Refer to chart for proper application. Packaged 10 to a card.
Part No.
Description
MOR71290 ............... Flush Head Fastener, .450" Short Body MOR71300 ............... Flush Head Fastener, .500" Medium Body MOR71310 ............... Flush Head Fastener, .550" Long Body MOR71350 ............... Oval Head Fastener, .500" Medium Body MOR71360 ............... Oval Head Fastener, .550" Long Body
Large Head Self-Ejecting Fasteners In demand by racing’s finest chassis builders, fasteners are used on steel, aluminum, and fiberglass body and interior panels. Load force is more evenly distributed for less pull-through. Ten per package. Use Fastener Springs MOR71400, 71410, 71420, 71425 or 71430. Part No.
MOR71380
Description
Plates provide a secure metal backing to prevent fastener body rivets from pulling out of fiberglass body components and fastener spring brackets from cutting into body panels. Sold ten per package in standard and large sizes. Description
MOR71495
Quick Fastener Washers MOR71610 NEW! Teflon washers fit all quick fasteners, prevent paint damage. 25 per pack.
Description
MOR71440 ............... 0.400" x 5/16" Body, .098" To .133" Grip Range MOR71450 ............... 0.450" x 5/16" Body, .148" To .183" Grip Range MOR71500 ............... 0.500" x 5/16" Body, .198" To .233" Grip Range MOR71530 ............... 0.650" x 5/16" Body, .348" To .383" Grip Range
Quick Fastener Wrenches Stainless steel wrench fits slot head, 1/4-turn fasteners far better than a screw driver, reducing the possibility of damaged fasteners and body panels. Non-slip, plastic hand grip.
Butterfly Self-Ejecting Fasteners “Butterfly” grip on head sets these Fasteners apart from others and makes fastening and unfastening quick and easy. Use MOR71430 as a replacement spring. Packaged ten to a card. Springs included.
Part No.
Description
Quick-Release Pins NEW! The ultimate in quick-release fastening. T-handle equipped pins are available in popular sizes. Packaged two per card.
Quick Fastener Mounting Brackets Brackets can be fastened to any member of the car to provide a convenient mount for quick fastener springs.
MOR71550
MOR71551
MOR71552
MOR71600
Description
MOR71600 ........Wide Head MOR71606 ........Heavy Duty Screwdriver Type
MOR71510 ............... 0.500" x 5/16" Body, .198" To .233" Grip Range MOR71540 ............... 0.650" x 5/16" Body .348" To .383" Grip Range
MOR71555
Description
MOR71550 ............... Use With MOR71425 Or MOR71430 Springs, 10-Pk. Steel MOR71551 ............... Flat, 10-Pk. Steel MOR71552 .............. 90° Angle, 10-Pk. Steel MOR71553 .............. Lightweight 45°, Accepts 1" Springs, 10-Pk. NEW! MOR71555 .............. Hood, Panel Or Accessory Mount, 2-Pk. Steel NEW! MOR71556 .............. Same As MOR71555 Except Aluminum, 2-Pk. NEW!
Part No.
Description
MOR90380 ............... 1/4" Dia. x 1" Long MOR90390 ............... 1/4" Dia. x 1-1/2" Long MOR90395 ............... 1/4" Dia. x 2" Long MOR90400 ............... 5/16" Dia. x 1" Long MOR90402 ............... 5/16" Dia. x 2" Long MOR90404 ............... 5/16" Dia. x 3" Long MOR90410 ............... 3/8" Dia. x 1" Long MOR90420 ............... 3/8" Dia. x 2" Long MOR90430 ............... 3/8" Dia. x 3" Long MOR90440 ............... 1/2" Dia. x 2-1/2" Long
2010
129-144OW10.indd 131
MOR71490
MOR71490 ............... Quick Fastener Reinf. Plates MOR71495 ............... Large Dia. Quick Fastener Reinf. Plates
Spring-loaded but tons release quickly. Spring also holds the button captive, a practical necessity for quick pit work situations. Use MOR71430 as a replacement spring. Ten per card. Springs included.
Part No.
1" Springs – Total Material Thickness Range MOR71425 .250" .165"-.200" .215"-.250" .265"-.300" .315"-.350" .365"-.400" MOR71430 .325" .098"-.133" .148"-.183" .198"-.233" .248"-.283" .348"-.383" 1-3/8" Springs – Total Material Thickness Range MOR71420 .325" .105"-.148" .155"-.198" .205"-.248" .255"-.298" .355"-.398" MOR71410 .375" .055"-.098" .105"-.148" .155"-.198" .205"-.248" .305"-.348" MOR71400 .425" .005"-.048" .055"-.098" .105"-.148" .155"-.198" .255"-.298" Note: To select the proper fastener/spring, determine the total thickness of the panels being joined including the space in between, if any. Select the appropriate body length and spring height combination to provide the desired thickness range.
Part No.
Self-Ejecting Fasteners
Part No.
Spring Height .400" Body .450" Body .500" Body .550" Body .650" Body
Quick Fastener Reinforcement Plates
MOR71370 ............... .500 x 7/16" Body MOR71375 ............... .500 x 7/16" Body MOR71380 ............... .500 x 7/16" Body, 3/16" Hex Drive NEW!
Part No.
Spring Part No.
131
11/10/09 10:05:53 AM
Stud Mount Valve Spring Compressor Valve spring changing is greatly simplified with the Moroso Stud Mount Tool which will fit both 3/8" and 7/16" rocker studs. The 12" handle is much stronger and provides ample leverage to overcome the resistance of extremely high pressure valve springs. Part No.
Description
MOR62370 ........Stud Mount Valve Spring Compressor MOR62372 ........Contains All Parts Necessary To Convert MOR62370 To Use with Jesel Rocker Shaft Systems
A & B Epoxy MOR35560 NEW! Easy-to-use epoxy is typically used to install oil return screen kits or repair engine blocks, cylinder head intake ports and intake manifolds. Adheres to any clean surface and has a maximum use temperature of 250°F.
Tire Pressure Gauges Gauges have large 2-5/8" dial faces for easy reading. Chuck swivels a full 360° for quick, easy pressure checks. Hose is 15-1/2" in length. Part No.
Valve Seat Pressure Testers The most accurate way to monitor valve seat pressure on an assembled engine. Compatible with most aftermarket aluminum, OEM steel rockers, and shaft mounted rocker arms. Includes interchangeable front claws to fit most aftermarket aluminum rocker arms. Part No.
Description
MOR62388 ........Valve Seat Pressure Tester, Interchangeable NEW! Front Claws To Fit Most Rockers, 160-400 PSI MOR62390 ........Valve Seat Pressure Tester, 100-300 PSI MOR62391 ........Valve Seat Pressure Tester, Low Profile Design, 160-400 PSI NEW!
Ceramic Engine Seal MOR35500 The best chemical sealer money can buy. Has saved the day for many an oval track racer. Can also be used in tow vehicles or street applications. If this won’t seal it, it will have to be welded. Not for use with anti-freeze.
Pro-Boot Guard MSD3412 Pro-boot guard protects spark plug boots from excessive heat. Slide-on sleeve has fiberglass woven inside coated with silicone rubber to withstand extreme temperatures. Six foot roll.
Cylinder Markers Molded plastic numerical markers ensure that plug wires are always in the right place. Part No.
Description
MSD3413 ..........Cylinder Markers, 8mm Wire MSD3414 ..........Cylinder Markers, 8.5mm Wire
Pro-Crimp Tool MSD35051 The ideal tool for making up a quantity of plug wires, or doing custom wiring. Pro-Crimp’s interchangeable jaws can form a variety of different crimps using one tool. Hardened steel frame, comfortable molded hand grips and ratchet action yield secure, factory quality crimps every time. Supplied with crimping/ stripping jaws for MSD spark plug wire terminals.
132
Description
MOR89550 ........0-15 PSI MOR89555 ........0-40 PSI NEW! MOR89560 ........0-60 PSI
Quick Fastener Sinking Tool MOR71605 NEW! Two-piece, zinc-plated steel tool sinks flush-mount quick fasteners in single or double panels.
Coil-Over Shock Adjusting Tool MOR62030 Use to adjust AFCO, Koni, Bilstein, QA1, Pro and most other coil-over shocks with up to 3-1/4" diameter adjusting nuts. Cast steel construction.
Mini Stripper/Crimper MSD3503 An inexpensive way to make a set of custom made plug wires. Die is used to strip Heli-Core or Super Conductor wire. Stripper/crimper can then be placed in a vise to provide a solid terminal crimp to the wire.
Timing Lights An accurate timing light is extremely important to the performance of any race engine. MSD offers two lights to keep the timing accurate. Both feature easy to see bright strobes and detachable leads for easy storage. The self-powered timing light uses six AAA batteries so there are no extra wires hanging over the engine compartment. Ideal for race cars without batteries. Part No.
Description
MSD8990 ..........MSD Timing Light MSD8991 ..........Self-Powered Timing Light
2010
129-144OW10.indd 132
11/10/09 10:06:11 AM
Chevrolet Pro Mag 12LT MSD7908
RPM Module Kits
Designed for sprint car racing, unit is nearly 30% lighter and smaller for a better fit. Power producing generator clamps to the billet aluminum lower housing which allows easy timing changes. Magneto provides incredible power and is maintenance-free (no points, batteries or magnets). Sold with cap, rotor, bronze gear and connectors. An electronic points box is required. Electronic Points Box
Each kit contains five modules, set at 200 RPM increments within a range of 1,000 RPM. Compatible with all MSD accessories requiring plug-in modules. Other modules up to 13,900 RPM are available.
Part No.
Description
MSD8106
MSD8106 ..........Endurance-Events Over 50 Laps, With Rev Limiter
Pro Mag Replacement Cap And Rotor MSD7919 Made with DuPont Rynite high dielectric material, Cap features stainless terminals for maximum corrosion resistance.
Part No.
Range
MSD8743 ........3000-3800 MSD8744 ........4000-4800 MSD8745 ........5000-5800 MSD8746 ........6000-6800 MSD8747 ........7000-7800 MSD8748 ........8000-8800 MSD8749 ........9000-9800
Part No.
Range
MSD87431....... 3100-3900 MSD87441....... 4100-4900 MSD87451....... 5100-5900 MSD87461....... 6100-6900 MSD87471....... 7100-7900 MSD87481....... 8100-8900 MSD87491....... 9100-9900
Custom Fit Chevy Sprint Super Conductor 8.5mm Spark Plug Wire Set MSD31549 Super Conductor 8.5mm spark plug wire set is cut to fit for “tight fit” Chevy V8 sprint cars. Wires have 90° ends at both the spark plug and magneto cap, have extremely low resistance, high RFI suppression and are specifically for use with the Pro Mag.
Chevy Bronze Distributor Gear MSD8471
Super Conductor Coil Wire MSD84039
Made of aluminum bronze with 5% nickel for strength, .500" gear resists wear and breakage.
Coil wires endure eight times the use of each plug wire and should be replaced often.
Kill Switch And Harness MSD8111
Pro-Clamp Wire Separators MSD8843
Heavy duty, single pole, single throw switch is rated at 15 Amps and is designed for the Pro Mag 12. Note: For Use With 12 Amp Magnetos Only, Not For Use With The Pro Mag 44.
Snap together separators have special grooves to hold wires firmly without damaging insulation. Kit includes two 4-wire assemblies, two 3-wire assemblies, and four 2-wire assemblies.
Points Box Vibration Mounts Mounts isolate electronic points box and other accessories from vibrations. Four mounts and hardware in each kit. Part No.
Description
MSD8822 ..........Vibration Mounts, MSD8823 ..........Vibration Mounts, 12 And 44 Amp Electronic Points Box
Quick Release Mounting Panel MSD8102 Sheet metal mounting panel makes removing and installing your MSD electronic points box simple.
Chevy Distributor Hold Down Clamp MSD8110 CNC-machined, chrome moly clamp is strong enough to keep the timing locked in place. Fits all MSD billet type SB/BB Chevy and 90° V6 distributor housings. Includes mounting stud, lock washer and nut.
Heat Guard Kit MSD3408 Protect spark plug wires from extreme heat with MSD’s Heat Guard Sleeving. Heat guard allows air to pass through, cooling the wire while eliminating moisture build-up. Enough material to fully cover one V8 wire set.
Self Vulcanizing Silicone Tape MSD3410 Silicone rubber tape provides maximum heat protection for electrical connections, hoses, spark plug boots, etc. Tape bonds itself together through the use of a catalyst on one side of the tape and is sold in 12' rolls.
Pro-Heat Guard Wire Sleeve MSD3411 Provides extra protection to spark plug wires. Tough, glass-woven sleeving is covered with Silicone rubber and resists temperatures up to 1000°F. Sold in a 25 foot roll.
2010
129-144OW10.indd 133
133
11/10/09 10:06:35 AM
Front Hubs
Steering Arms
Assembled with bearings, seals, drive studs, drive pins, hex nuts, dust covers and snap rings. Assemblies weigh 9.3 lbs.
Each Steering Arm is machined from 2024 aluminum. Arms are drilled and tapped 1/2"-20 NF threads for mounting.
Part No.
Description
MPD13000 ........Sprint Front Hubs, Complete Set, Use With MPD14002 Spindles MPD12300 ........Replacement Steel Drive Stud, 5/8"-11, For MPD13000 Or SND1006, Sold Individually
Part No.
Description
A
MPD17600LT MPD17700LT
Right Front, 3.75" B.C. Left Front Combo, 3.75" B.C.
– –
Dimensions B C
D
– 6.060" 1.400" 5.625" 6.060" 1.400"
Steering Arm Measurement Guidelines Please follow these guidelines and use the diagram to determine correct steering arm dimensions. A - Drag Link Centerline To King Pin Centerline B - Drag Link Centerline To Spindle C - Tie Rod Centerline To King Pin D - Tie Rod Centerline To Spindle
Wheel Spacers For 6-pin sprint applications. Part No.
MPD17600LT
Description
MPD86000 ........1/4" Thick Wheel Spacer MPD86200 ........1/2" Thick Wheel Spacer
Hollow Torsion Bars King Pins Part No.
MPD14400TILT Description
MPD145HX
MPD14400TILT ......... Titanium King Pin With Cap, Lightweight, .859" Dia. MPD145HX ............... Hex King Pin Cap
Part No.
Description
MPD14203 ........Spindle Thrust Bearing Kit With Shims (Pair) MPD14204 ........0.005" Shims (Pair) MPD14205 ........0.007" Shims (Pair) MPD14206 ........0.010" Shims (Pair) MPD14207 ........0.015" Shims (Pair) MPD14600 ........Ford Spindle Nut Kit
MPD14203
Torque Tubes And Collars
Brake Mounts MPD offers an assortment of sprint brake mounts. Part No.
Description
MPD290950HW ........ 29" Length, .950" Bar Dia. MPD290975HW ........ 29" Length, .975" Bar Dia. MPD291000HW ........ 29" Length, 1.000" Bar Dia. MPD291025HW ........ 29" Length, 1.025" Bar Dia. MPD300925HW ........ 30" Length, .925" Bar Dia. MPD300950HW ........ 30" Length, .950" Bar Dia. MPD300975HW ........ 30" Length, .975" Bar Dia. MPD301000HW ........ 30" Length, 1.000" Bar Dia. MPD301025HW ........ 30" Length, 1.025" Bar Dia. MPD301050HW ........ 30" Length, 1.050" Bar Dia. MPD301065HW ........ 30" Length, 1.065" Bar Dia.
Spindle Nuts, Thrust Bearings And Shims Part No.
High quality, alloy steel hollow torsion bars are 1-1/8" dia., 48-spline. Each bar is packaged in a protective tube at no extra charge. Part numbers denote length and rating.
MPD179K3 MPD1790K
Description
Caliper B/C
MPD1790K Rotor Adapter Kit N/A MPD179K3 Top Mount, 1/4" Thick 3.25"/2-Piston MPD179K4 Front Mount, 1/4" Thick 3.25"/2-Piston MPD179K6 Front Mount, 1/4" Thick 5.25"/4-Piston
Spindle B/C
Rotor Dia.
N/A 3.75" 4.25" 4.25"
N/A 11" 11" 12.19"
Tubes are turned to a 3.0" O.D. and reamed to a 2.628" I.D. to provide .005" clearance between the torque ball and torque tube. Torque collars have been ball milled to keep weight at a minimum. Includes O-ring. Part No.
Description
MPD64601 ........28" x 3.0" Aluminum Torque Tube And Collar, 6.75 Lbs. MPD6460132 ....32" x 3.0" Aluminum Torque Tube And Collar, 7.6 Lbs. MPD6460136 ....36" x 3.0" Aluminum Torque Tube And Collar, 8.3 Lbs.
Shorty Spindle MPD14000SH
Torque Balls
Sprint standard billet aluminum shorty spindle with four ears are for 6-pin hub, 3.75" spacing. Use with MPD13000 Front Hub Set.
Part No.
Cone Spacer MPD41000 Used for obtaining maximum clearance on rod ends. Made from 1" aluminum round stock with 1/2" I.D., tapered to 45°.
Rear Torsion Arm MPD17100LT Ball milled, billet aluminum straight rear torsion arm is 1" x 2" x 18-1/2" long. Bend to fit.
134
Machined from solid billet aluminum and hard anodized for a durable, long-lasting finish. Description
MPD64200 ........Torque Ball, 4.25" Ball Dia., Inside Tube, 1.1 Lbs. MPD64202 ........Torque Ball, 4.45" Ball Dia., Over Tube, 1.9 Lbs. MPD64203 ........Torque Ball, 4.45" Ball Dia., Over Tube, 1.2 Lbs.
Magnesium Bellhousings And Collars Part No.
Description
MPD68002 ........Lightweight Bellhousing, 4.45" Dia., 1.1 Lbs. MPD68102 ........Lightweight Collar, 4.45" Dia., .3 Lbs.
MPD68002
2010
129-144OW10.indd 134
11/10/09 10:06:58 AM
U-Joint Assemblies
Aluminum Rear Axle Nuts
U-joints are full 7075-T651 aluminum or combo (aluminum flange and a steel yoke). Assemblies are anodized-finished and include Spicer 5-153X U-joint cross, 1-3/8"-16 splined yoke, direct-mounting crank flange, U-joint spring and fasteners.
Axle nuts have a 3" hex and are available in left or right hand threads.
Part No.
Part No.
Description
MPD85000LF............ LH Threads, Rear Axle Nut, 2-1/2" MPD85000RT ........... RH Threads, Rear Axle Nut, 2-1/2"
Description
MPD63800 ........Aluminum U-Joint Assembly MPD63803 ........Combo U-Joint Assembly, Aluminum Flange And Steel Yoke MPD63307 ........Replacement U-Joint Spring MPD63300 ........Replacement Aluminum Yoke Only
Power Steering Mount Adapters
Shift Lever Lightweight, positive lock shifter is designed to securely lock the car in gear. Spring-loaded shifter is bolted to mounting plates that are welded onto the frame. Part No.
Description
MPD18900
MPD18901
Aluminum adapters are offered in two styles. Part No.
Description
MPD18900 ............... Power Steering Mount Adapter MPD18901 ............... Power Steering Mount Adapter, Wing Style
MPD84000 ........Shift Lever Only MPD84020 ........Shift Cable Only
Inline Fuel Shut-Off Valves Hollow Steel Driveshafts
Mounts inline and allows filter replacement without spillage. Valves attach directly to MPD fuel filters and are offered with or without return ports. Part No.
Description
Manufactured from aircraft quality alloy steel, each driveshaft has been carefully heat treated to provide maximum strength and durability. Driveshafts are splined 1-1/4"-10 and 1-3/8"-16, and are shipped in protective tubes at no extra charge.
MPD73800 ........-12AN, No Return Ports Note: Will Not Fit Allstar Fuel Filter.
Part No.
Fuel Block MPD73900
Description
MPD65100HWST28 ....... 28" Long, 4.8 Lbs. MPD65100HWST30 ....... 30" Long, 4.9 Lbs. MPD65100HWST32 ....... 32" Long, 5.5 Lbs. MPD65100HWST35 ....... 35" Long, 5.8 Lbs. MPD65100HWST38 ....... 38" Long, 6.2 Lbs.
Spiral Pin MPD65700
Fuel Block has -8AN inlet and three -6AN outlets. Includes six male fittings.
Standard Fuel Shut-Off Valve MPD76504
Special 1/4" x 2" spiral pin is used for securing 10-10 coupler to rear end.
May be mounted anywhere from the pump to the barrel valve. Shut-off valve uses -6AN male fittings.
Rear Axle Spacers
Fuel Filter Clamps
Anodized aluminum, lightened axle spacers feature a 2-3/4"-42 splined center and are offered individually or in kits.
1" Rear Axle Spacer Kit MPD87000 Includes one of each spacer: 1-7/8" (MPD87003), 1-1/2" tapered (87004), 7/8" (87005), and 3/8" (87006).
2" Rear Axle Spacer Kit MPD87100 Includes one of each spacer: 2-3/8" (MPD87001), 2" tapered (87002), 1-7/8" (87003), 1-1/2" tapered (87004), 7/8" (87005) and 3/8" (87006). Part No.
Description
Individual Rear Axle Spacers MPD87001 ............... Splined 2-3/8" Rear Axle Spacer MPD87002 ............... Splined 2" Tapered Rear Axle Spacer MPD87004 ............... Splined 1-1/2" Tapered Rear Axle Spacer MPD87005 ............... Splined 7/8" Rear Axle Spacer MPD87006 ............... 3/8" Rear Axle Spacer, Not Splined MPD87007 ............... Splined 7/8" Tapered Rear Axle Spacer
Cylinder Wiper MPD3580W Cylinder wiper keeps oil contained in the cylinder.
Lightweight, fully radiused fuel filter clamps fit 1-3/8"or 1-1/2" tubing. Part No.
Description
MPD74200 ........For 1-3/8" Tubing, Fuel Filter Clamp MPD74400 ........For 1-1/2" Tubing, Fuel Filter Clamp
Wing Slider Valve Precision-machined, lightened aluminum, two-way control valve is thoroughly inspected and pressure tested. The compact design allows easy mounting. Part No.
Description
MPD36000LT .....Wing Slider Valve MPD37000 ........Wing Slider Plumbing Kit, 3/16" Plastic
Adjustable Wing Strut MPD3580S Bolts to the slider and replaces the hydraulic cylinder. Standard length, adjustable design.
2010
129-144OW10.indd 135
135
11/10/09 10:07:23 AM
Midget Components Front Hubs MPD28000 Lightweight hubs feature 6-pin lugs. Assembled hubs include bearings, seals, drive studs, drive pins, hex nuts, pressure plates, dust covers and snap rings. Recommended for use with MPD24500SH spindle. Sold per pair.
Lightened Pitman Arm For Midget MPD27400LT Machined aluminum Pitman arm is 3/4" thick x 1-1/8". Centerline of spline to first hole is 8", while the centerline of spline to last hole is 12". Holes are spaced in 1" increments.
Tools Tire Bead Breakers Bead breakers will break down the most stubborn tire beads. Tools available for 13" Midget wheels.
Aluminum Lug Nut MPD25400
Part No.
Sold individually.
Description
MPD23000 ........13" Wheels (Midget), Tire Bead Breaker
Spindle MPD24500SH Short design midget spindle is made from quality aluminum billet. King pin bushings have been installed and honed.
Tire Syper MPD1800S Tool has a rubber grip and replaceable blades. Sype tires for better traction.
Wheel Spacers MPD22000 1/4" thick wheel spacer for use with 6-pin midget hubs.
Front Brake Caliper Mount MPD2750B
Oil Filter Cutter MPD40000 Quickly open oil filters for inspection; check for engine damage.
Two-piston brake caliper mount has 3-1/4" spaced top holes. Designed for use with MPD24500SH spindle and 10" dia. rotor.
Power Bleeder Similar in design and function to professional mechanics' tools, but at a more affordable price, the power bleeder simplifies brake or hydraulic clutch bleeding. Attach to the fluid reservoir with the cap adapter, for a one-man bleeding operation. Power bleeders are available to fit a variety of master and hydraulic clutch cylinder reservoirs. Adapters may also be purchased separately. Description
Power Bleeder Part No.
Adapter Part No.
45mm Reservoir, Wilwood Comb. Remote/Tilton 74/75 Series Small Round Reservoir, WIL260-1304, 260-2636, 260-6579 Rect. Reservoir, Early GM/Ford/Chrysler/Tilton 73 Series/AFCO/Howe Power Bleeder Pro, Includes All Popular Adapters
MTP0100 MTP0101 MTP0105 MTP0250
MTP1100 MTP1101 MTP1105 MTP1100/1101/1105
Bleeder Bottles MTP1820 Bleeder bottles include stainless lanyards for attachment to suspension components and a return nipple to prevent spills. Sold in pairs.
Roger Hunyady
136
Photo: Skip Konkle
2010
129-144OW10.indd 136
11/10/09 10:07:46 AM
Ultra-Seal Head Gaskets
Oil Pan Gaskets
Ultra-Seal Head Gaskets’ flexible graphite core is elastomer coated for maximum sealing and performance. All gaskets are sold in pairs unless specified.
Mr. Gasket oil pan gaskets use a high density cork/rubber blend for effective sealing. Ultra-Seal gaskets are made from a cellulose/nitrile compound with a black latex rubber coating for added durability.
Application
Description
Gasket Comp. Bore Thickness
SB Chevy, 1957-96 283-350 Graphite Core 4.130" SB Chevy, 1957-96 283-350 Graphite Core 4.130" SB Chevy, 1970-80 400 Graphite Core 4.190" *Does not fit 1992-96 LT-1.
.028" .038" .038"
Application Part No.
MRG1134* MRG5800* MRG5801
SB Chevy Steel Shim Head Gaskets MRG1130
Exhaust Manifold/Header Gaskets
Coated, steel shim head gaskets fit 4.100" bore and are only .020" thick to maximize compression. Sold in pairs.
Intake Manifold Gaskets Mr. Gasket offers three different types of Intake Manifold Gaskets: traditional cellulose/nitrile material, Ultra-Seal cellulose/nitrile material with silicone beading around each port, and new Super intake gaskets, which seal quickly during assembly, release easily during disassembly and require no gasket sealer. Application
Port Dim.
Chevy Small Block 262-400 Modified Stock Port 1.31" x 2.10" Modified Stock Port 1.31" x 2.10" Small Race Port 1.25" x 2.13" Medium Race Port 1.31" x 2.19" Medium Race Port 1.31" x 2.19" Large Race Port 1.31" x 2.31" Large Race Port 1.31" x 2.31" X-Large Race Port 1.38" x 2.38" Brodix Aluminum 1.38" x 2.25" Brodix Aluminum 1.38" x 2.25" 18° Roll Over 1.35" x 2.26"
Thk.
Mr. Gasket
Ultra-Seal
Super
1/16" 1/8" 1/16" 1/16" 1/8" 1/16" 1/8" 1/16" 1/16" 1/8" 1/16"
MRG101G MRG106 – MRG102G MRG116 MRG111 MRG113 – MRG125 MRG126 MRG143
– MRG4666G – – MRG5821 – MRG5822 MRG4667G MRG5812 – MRG5823 – MRG5813 – MRG5824 – – – – – – –
Timing Cover Seals And Gaskets Part No.
Mr. Gasket
Ultra-Seal
SB Chevy, 1955-74 265-400 MRG196/MRG190* MRG5880/MRG5884† SB Chevy, 1975-79 262-400 MRG198/MRG189* MRG5881/MRG6560** SB Chevy, 1980-86 305-350 MRG185 MRG5882/MRG6560** SB Chevy, 1987-96 305-350 – MRG5885/MRG6561** SB Ford, 1962-85 221-302 MRG291 MRG5890/MRG6683** *Cork/Rubber. **Molded rubber. †Includes early/thin and late/thick front oil pan seals.
Mr.Gasket
Traditional Mr. Gasket exhaust gaskets are a high temperature acrylic blend – exceptional sealing and durability. Ultra-Seal exhaust gaskets are high temperature steel core/graphite faced material for added durability. Copper Seal gaskets are dead soft .043" thick embossed copper that will never blow-out and may be used over and over. New aluminum gaskets will not shrink, deteriorate or blow-out.
Ultra-Seal
Copper Seal
Aluminum Copper Application
Port Dim.
Chevrolet Small Block 262-400 1955-91 Medium Square Port 1.45" x 1.55" 1955-91 Small Square Port 1.45" x 1.48" 1955-91 Stock Square Port 1.25" x 1.30" Round Port 1.50" Dia. Round Port 1.63" Dia. Brodix “D” Shaped Port 1.55" x 1.71" Hooker/Stahl Adapter Plate 1.93" Dia. Hooker Rev. Plate/Stock 1.61" x 1.85" Brodix Spread Port 1.65" x 1.60" Oval Port Header Flange 1.50" x 1.82"
Mr. Gasket
Ultra Seal
NEW!
Seal
Aluminum
NEW!
NEW!
MRG150A
MRG5901 MRG7153
–
MRG150C
MRG5900 MRG7151 MRG7401G
MRG6452 MRG150B MRG150
MRG5916 – – MRG5907 MRG7150 – MRG5902 MRG7152G MRG7402G
–
MRG5903
–
–
–
MRG5904
–
–
– –
MRG5908 MRG5906
– –
– –
–
MRG5917
–
–
Description
Timing Cover Seals MRG18 ..............Metal Clad, Chevy Small Block, 1955-96 262-400 Timing Cover Gaskets MRG89 ..............Cork, Chevy Small Block, 1955-96 262-400 MRG90 ..............Cork/Rubber, Chevy Small Block, 1955-96 262-400 MRG92 ..............Syntheseal, Chevy Small Block, 1955-96 262-400 MRG93 ..............Composite, Chevy Small Block, 1955-96 262-400
Rear Main Seals Part No.
Description
MRG1960 ..........Chevy Small Block, 1959-86, Silicone Dual Lip MRG1962 ..........Chevy Small Block, 1970-79 400, Align Honed Applications
Competition Wire Separators Valve Cover Gaskets
Heat-resistant, plastic separators minimize cross firing and fit 7mm and 8mm plug wires. Includes two each: 2-wire clips, 3-wire clips and 4-wire clips.
Mr. Gasket offers three types of valve cover gaskets: traditional, high density cork/rubber, steel core Ultra-Seal, and steel core molded rubber. Application
SB Chevy, 1958-86 265-400 SB Chevy, 1958-86 265-400 SB Chevy, 1958-86 265-400 SB Chevy, 1986-96 305-350
Part No.
Thk.
Mr. Gasket
3/16" MRG175 5/16" MRG179 1/4" MRG5855 3/16" MRG168
Ultra-Seal
Molded Rubber
MRG5860 MRG5853G MRG5861 – – – MRG5867 –
Description
MRG6017 ..........Black Wire Separators, With Mr. Gasket Logo NEW! MRG9728 ..........Black Wire Separators, Without Logo NEW!
Grommet Set MRG3706 Assortment of 30 Grommets are useful when running wires, cables or hoses through sheet metal. Includes six grommets each in 1/2", 5/8", 3/4", 7/8" and 1" sizes.
2010
129-144OW10.indd 137
137
11/10/09 10:08:20 AM
Valve Cover Stud Kits NEW!
Cylinder Head Bolt And Washer Kits NEW!
Bullet tip, Grade 5 studs are black oxide finished and hex nuts are cadmium plated for corrosion resistance. Each kit includes eight studs and nuts.
Longer than stock 7/16" dia. Grade 8 cylinder head bolts require special head bolt washers (available separately) for improved clamping force and head gasket sealing.
Part No.
Part No.
Description
MRG6324 .... 1/4"-20/28 x 1-1/8" Stud Kit, Steel Valve Covers MRG6329 .... 1/4"-20/28 x 1-1/2" Stud Kit, Cast Valve Covers MRG6330 .... 1/4"-20/28 x 1-3/4" Stud Kit, Includes Nylon Insert Lock Nuts and Washers
Oil Pan And Timing Cover Bolts
Intake Manifold Bolts
Zinc plated, Grade 5 Bolts have smaller hex heads. Ideal for tight spaces. Underhead serrations prevent loosening and wide flange head provides uniform clamping pressure.
Offered with Grade 5 hex and Grade 8 twelvepoint head, high quality fasteners assure accurate torque readings and optimum clamping pressures. Washers are included. Part No.
Description
MRG940G ..........SB Chevy 265-400, 17 Bolts Only (1 Head) MRG87 ..............7/16" ID Washers Only, 34 Pcs.
Part No.
Description
Description
Hex Head MRG955G ..........3/8"-16 x 1", 12 Bolts And Washers, Fits SB Chevy Twelve-Point MRG6091 ..........3/8"-16 x 1", 12 Bolts And Washers, Fits SB Chevy NEW!
Oil Pan Bolt Kits MRG6085 ..........SB, 1/4"-20 x 1/2" (14 Pcs.), 5/16"-18 x 3/4" (4 Pcs.) Timing Cover Bolt Kit MRG6090 ..........SB 1/4"-20 x 1/2" (10 Pcs.) NEW!
Hex Head Header Bolts
Magnetic Oil Pan Drain Plug
Grade 5 Bolts have smaller 3/8" or 7/16" hex heads for easier header installation, especially in tight places. Washer-faced bolts have protective black finish.
Part No.
Part No.
Teflon Tape MRG2842G
Description
MRG15 ..............Magnetic Oil Pan Drain Plug, 1/2"-20 MRG16 ..............Replacement 1/2" Nylon Washer
Description
MRG915 ............3/8"-16 x 3/4", 7/16" Wrench, 12 Pcs. MRG917 ............3/8"-16 x 1", 7/16" Wrench, 12 Pcs. MRG919G ..........3/8"-16 x 3/4", 7/16" Wrench, 16 Pcs. NEW! MRG3409 ..........3/8"-16 x 3/4", Mini 3/8" Hex Head, 12 Pcs.
Tape is impervious to fuel and oil, increases the sealing capabilities of all threaded joints. Each roll is packed in a resealable plastic container for easy storage.
Fast Fill Funnel MRG3695
White Tire Marker MRG9312
Funnel has a wide mouth, narrow filler tube and a built in brass screen filter. Six quart capacity.
Ideal for tire sizing and keeping track of tire stagger. Weather and wash resistant.
Shadow Series AN Fittings Black and silver aluminum fittings are offered in cutter and push-on versions. Cutter type fittings are for use with stainless steel braided hose and can withstand up to 1,000 PSI. Push-on type fittings withstand up to 250 PSI and are ideal for push-on rubber hose. Size Hose Straight Swivel
Cutter Type Fittings -4 MRGS4 -6 MRGS6 -8 MRGS8 -10 MRGS10 -12 MRGS12 Push-On Type Fittings -6 MRGP6 -8 MRGP8 -10 – -12 MRGP12
45° Swivel
90° Swivel
150° Swivel
180° Swivel
MRGF454 MRGF456 MRGF458 MRGF4510 MRGF4512
MRGF904 – MRGF906 MRGF1506 MRGF908 MRGF1508 MRGF9010 MRGF15010 MRGF9012 –
MRGF1804 MRGF1806 MRGF1808 – –
MRGP456 MRGP458 MRGP4510 MRGP4512
MRGP906 MRGP1506 MRGP1806 MRGP908 MRGP1508 – MRGP9010 – – MRGP9012 – MRGP18012
AN To NPT Adapters NPT Size AN Size
1/8" 1/8" 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 3/4"
138
-4 -6 -4 -6 -6 -8 -10 -8 -10 -12 -12
Straight
MRGA184 MRGA186 MRGA144 MRGA146 MRGA386 MRGA388 MRGA3810 MRGA128 MRGA1210 MRGA1212 MRGA3412
MRGS4
MRGF904 MRGF1506
Individual Carburetor Adapters 45°
90°
– MRGA184B MRGA186A MRGA186B MRGA144A MRGA144B MRGA146A MRGA146B MRGA386A MRGA386B MRGA388A MRGA388B – MRGA3810B MRGA128A MRGA128B – – – – – –
Application Straight
Dual Inlet - Short Dual Inlet - Standard Dual Inlet - Extended Single Inlet Holley Carter/Edelbrock
Carb Thread Size AN Size
7/8"-20 7/8"-20 7/8"-20 9/16"-24 5/8"-20
-6 -8 -8 -6 -6
Part No.
MRGA7861 MRGA7881 MRGA7882 MRGA9166 MRGA586
MRGA9166
45°
Male Tee 90°
Part No.
Size
MRGAT6 MRGAT8
-6 -8
MRGAT6
2010
129-144OW10.indd 138
11/10/09 10:08:45 AM
Swivel Coupling Part No.
“A” Size
Straight MRGSC6 MRGSC8 MRGSC86 45° MRGSC6A MRGSC8A 90° MRGSC6B
Flare Reducers
“B” Size
-6 -8 -8
-6 -8 -6
-6 -8
-6 -8
-6
A
B
A
Part No.
“A” Size
“B” Size
MRGSR86 MRGSR108 MRGSR128
-8 -10 -12
-6 -8 -8
A
B
Flare Plugs B
-6 A
Part No.
Size
MRGSP4 MRGSP8 MRGSP12
-4 -8 -12
B
Union Part No.
“A” Size
“B” Size
-6 -6 -8 -8 -10
-4 -6 -6 -8 -10
-4 -6 -8
-4 -6 -8
Straight MRGA64 MRGA6 MRGA86 MRGA8 MRGA10 90° MRGA904 MRGA906 MRGA908
A
B
A
B
Tim Shaffer
Photo: Jim DenHamer
Mudd Off MUD11022
NGK Spark Plugs
A one quart container of Mudd-Off concentrate mixes with water to make 3 gallons of solution. Product is odorless and colorless and is applied to the car before the race to allow easy clean-up after racing on dirt. An environmentally safe product compatible with all race track regulations.
NGK is the ultimate in Spark Plug technology. Choose from standard and V-Power racing plugs.
Wayne Redmond
For More Info, See Spark Plug Cross Reference Chart On Page 229
Photo: Dave Hill
Scotty Neitzel
Photo: John Berglund
2010
129-144OW10.indd 139
139
11/10/09 10:09:25 AM
Instant Canopies Shade in an instant. Norstar Instant canopies are simple and quick to set-up and take down. Each canopy includes a fire retardant Denier polyester fabric top. Frame, cover, stakes and bungee cords are included. NORLG10WH
Legend Series
Norstar’s most economical canopy, the Legend Series canopies are 10' x 10' with powder coated steel frames and weigh just 46 lbs. Choose blue or white fabric. Part No.
Description
NORLG10BL.............. Blue 10' x 10' Legend Series NORLG10WH ............ White 10' x 10' Legend Series
Platinum Series Durable Platinum Series canopies are available in 10' x 15' (94 lbs.) and 10' x 20' (121 lbs.) set-up sizes with heavy duty, powder coated steel frames. Choice of black, blue or red covers.
Titanium Series Top-of-the-line 10' x 20' Titanium Series canopies have durable, anodized aluminum frames for easy set-up. Canopies weigh just 99 lbs. and are offered with black, blue or red covers.
NORPL20RD
Canopy Part No.
Description
Replacement Frame
Replacement Cover
Canopy Part No.
Description
Replacement Frame
Replacement Cover
NORPL15BK NORPL15BL NORPL15RD NORPL20BK NORPL20BL NORPL20RD
Black 10' x 15' Blue 10' x 15' Red 10' x 15' Black 10' x 20' Blue 10' x 20' Red 10' x 20'
NORPL15N NORPL15N NORPL15N NORPL20N NORPL20N NORPL20N
NORTP15500 NORTP15503 NORTP15501 NORTP20500 NORTP20503 NORTP20501
NORTM20BK NORTM20BL NORTM20RD
Black 10' x 20' Blue 10' x 20' Red 10' x 20'
NORTN20N NORTN20N NORTN20N
NORTP20500 NORTP20503 NORTP20501
Replacement Components Part No.
OLVBLT005 ........7/16" Replacement Rod Bolt, Billet Rods, 1.400 U.H.L. OLVBSH027 OLVBLT006 ........7/16" Replacement Rod Bolt, Billet Rods, ARP 3.5 Upgrade, 1.400" U.H.L. OLVBSH011 .......Replacement Wrist Pin Bushing, SB Chevy Thin Wall OLVBSH027 .......Replacement Wrist Pin Bushing, SB Chevy Thick Wall
Billet I-Beam Connecting Rods Exclusive “Parabolic Beam” design reduces beam stress and provides one of the highest strength-to-weight ratios of any connecting rod currently available. Sold in sets of eight in Standard or Ultra Light versions with Oliver/ARP 7/16" WSB fasteners included. Part No.
Description
Small Block Chevy OLVC5700STUL8 Ultra Lt./Std. Journal OLVC5700STLT8 Std. Wt./Std. Journal OLVC5850STLT8 Std. Wt./Std. Journal OLVC6000STUL8 Ultra Lt./Std. Journal OLVC6000STLT8 Std. Wt./Std. Journal OLVC6000SMLT8 Std. Wt./Small Journal OLVC6125STUL8 Ultra Lt./Std. Journal OLVC6125STLT8 Std. Wt./Std. Journal OLVC6200STUL8 Ultra Lt./Std. Journal OLVC6200STLT8 Std. Wt./Std. Journal OLVC6250STLT8 Std. Wt./Std. Journal
Assembly Lube OLVLUBE Fastener assembly lubricant prevents galling. Sold in 1/2 oz. packages.
Rod Wrist Crank Journal Length Pin Pin Width
5.700" 5.700" 5.850" 6.000" 6.000" 6.000" 6.125" 6.125" 6.200" 6.200" 6.250"
.927" .927" .927" .927" .927" .927" .927" .927" .927" .927" .927"
2.100" 2.100" 2.100" 2.100" 2.100" 2.000" 2.100" 2.100" 2.100" 2.100" 2.100"
.940" .940" .940" .940" .940" .940" .940" .940" .940" .940" .940"
Gram Weights
159/422/581 181/467/648 183/476/659 164/431/595 185/476/661 181/464/645 166/432/598 185/478/663 169/433/602 186/481/667 187/480/667
Ben Rutan
140
OLVBLT005
Description
Photo: Doug Swift
2010
129-144OW10.indd 140
11/10/09 10:09:50 AM
Fuel Injection Pre-Filters
Pre-Filter For Fuel Funnels OUT20-1029-03
Pre-filters are available for straight or tapered air filters. Sold individually; four required.
Fuel funnel pre-filter fits 6 qt. funnels and will keep condensation and dirt particles out of fuel. Only available in red.
Description
Black
Blue
Red
Orange
Purple
Straight Style OUT10-1195-01 OUT10-1195-02 OUT10-1195-03 OUT10-1195-05 OUT10-1195-07 Tapered Style OUT10-1048-01 – OUT10-1048-03 – –
Pre-Filter For Carbon Fiber Air Box OUT10-1016-01
Pre-Filters For 3" Crankcase Breather
Available in black only.
Pre-filters fit the 3" diameter crankcase breathers mounted on the valve covers.
Pre-Filter For 600CC Mini Sprint OUT10-1144-01
Black
Available in black only.
Speed Screen Combo Kit OUT11-2325-12
Yellow
Orange
Purple
Strong water-repellent, dirt resistant covers for fuel injection, crankcase vents, magnetos, and engines. Use during hauling, washing or storage. Secures with a draw string and quick clip.
Description
OUT11-2324-12 ....... Replacement Screen OUT11-2325-12
Shockwears Shock Covers NEW! Keep expensive shocks free of dirt and debris. Manufactured from durable, water resistant Denier nylon, "Shockwears" include a Velcro strip for easy installation without removing shock. Offered in black only. Part No.
Red
Scrub Bags
Includes speed screen, frame and PVC heatshield. Part No.
Blue
NEW! Breather Without Shield OUT10-1013-01 OUT10-1013-02 OUT10-1013-03 OUT10-1013-04 OUT10-1013-05 OUT10-1013-07 Breather With Shield OUT10-1018-01 OUT10-1018-02 OUT10-1018-03 OUT10-1018-04 OUT10-1018-05 OUT10-1018-07
Description
Crankcase Vent Fuel Injection, Covers 4 Filters Vertex Magneto, Std. Cap Vertex Magneto, Lg. Cap Spare Engine Bag
Black
Blue
Red
Purple
OUT30-1018-01 OUT30-1018-02 OUT30-1018-03 OUT30-1018-07 OUT30-1162-01 – – – OUT30-1143-01 OUT30-1143-02 OUT30-1143-03 – OUT30-1264-01 OUT30-1264-02 OUT30-1264-03 OUT30-1264-07 OUTEB-1000 – – –
Description
OUT30-1245-01 ....... Standard 3-1/2" O.D. x 10" Long Spring OUT30-1348-01 ....... Standard 3-1/2" O.D. x 12" Long Spring
PJ1 Fog Blocker PJ125-4 Specially formulated to prevent fogging on face shields, glasses or goggles, even under extreme humidity. 4 oz. pump spray bottle.
Engine-Prep Assembly Lube PJ1SP701 Special blend of protective lubricants formulated to reduce internal friction. Eliminates damage at initial start-up in new and rebuilt engines. Also great for transmission overhauls and bearing replacements. 11 oz. net wt. can.
Foam Air Filter Oil PJ15-20 Engineered to enhance the effectiveness of foam air filters. Easy application. Sold in 13 oz. aerosol can.
Super Cleaner PJ13-20 NEW! Filter Cleaner PJ115-22
Degreaser uses powerful solvents to blast grease and grime away. Dries quickly and leaves no residue. Sold in 13 oz. aerosol can.
Easy-to-use cleaner is compatible with fabric or foam air filters. Simply spray on and wash off. Sold in 13 oz. aerosol can.
2010
129-144OW10.indd 141
141
11/10/09 10:10:03 AM
Bubble Goggles Ideal eye protection for all types of motorsports. Part No.
Description
PAU100 .............Clear PAU200 .............Smoke
Part No.
Description
PAU300 ............. Amber PAU400 ............. Blue
NEW VENDOR
Seal-4-Good And XX Carbon Exhaust Header Gaskets
PYS68011
Percy's offers two types of exhaust header gaskets that include innovative materials designed to put an end to performance inhibiting exhaust leaks. Manufactured from proprietary 100% carbon material, XX Carbon gaskets have the ability to withstand prolonged exposure to over 2,000° F., while Seal-4-Good gaskets are constructed from dead soft aluminum and will not blow out or burn out. Description
Seal-4-Good Part No.
XX Carbon Part No.
SB Chevy 265-400, Round 1.5" Port SB Chevy 265-400, Square 1.5" SB Chevy 265-400 Stock SB Chevy, Brodix D-Port, 1.8" x 1.6" SB Chevy, Brodix Alum., 1.75" x 2" SB Chevy, Hooker Spread, Round 2.125"
PYS66011 PYS66012 – – – –
PYS68011 PYS68012 PYS68020 PYS68022 PYS68023 PYS68038
NEW VENDOR
Split-Lock Exhaust Header Fasteners Revolutionary Split-Lock fasteners tightly secure without safety wire, lock washers, split flanges or “E”-clips. Fasteners have 3/8", 12-point heads and are offered in black oxide finished 8740 chrome moly, or polished stainless steel. Application
Description
Qty.
Black Oxide Stainless Steel Part No. Part No.
SB Chevy 265-400 SB Chevy 265-400
3/8" Dia. x 3/4" Long 3/8" Dia. x 1" Long
12 12
PYS20001 PYS20003
PYS21001 PYS21003
Concept Chassis
Plasma-Moly File Fit Piston Ring Sets Perfect Circle Rings reduce friction, increase power output, reduce oil consumption and last longer. File fit sets include eight ductile iron plasma-moly top rings, THG (tapered hook groove) second compression rings and CP-20 oil control rings. Piston ring sets listed include standard tension oil rings unless specified. Part No.
Bore Size
PER315-0034.005 4.000" PER315-0036.005 4.000" PER315-0005.005* 4.000" PER315-0033.005 4.000" PER315-0036.025 4.020" PER315-0005.025* 4.020" PER315-0034.035 4.030" PER315-0036.035 4.030" PER315-0005.035* 4.030" PER315-0033.035 4.030" PER315-0034.045 4.040" PER315-0036.045 4.040" PER315-0005.045* 4.040" PER315-0033.045 4.040" PER315-0034.065 4.060" PER315-0036.065 4.060" PER315-0005.065* 4.060" PER315-0033.065 4.060" PER315-0022.005 4.125" PER315-0032.005 4.125" PER315-0032.025 4.145" PER315-0022.035 4.155" PER315-0032.035 4.155" *Reduced Radial Wall Tension.
142
Top Ring
Second Ring
Oil Ring
5/64" 1/16" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 5/64" 1/16"
5/64" 1/16" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 5/64" 1/16"
3/16" 3/16" 3/16" (Low Tension) 1/8" 3/16" 3/16" (Low Tension) 3/16" 3/16" 3/16" (Low Tension) 1/8" 3/16" 3/16" 3/16" (Low Tension) 1/8" 3/16" 3/16" 3/16" (Low Tension) 1/8" 3/16" 3/16" 3/16" 3/16" 3/16"
Plasma-Moly Standard Gap Piston Ring Sets Same quality as file-fit rings, but ready to install. Sets are only available with standard tension oil rings. Part No.
Bore Size
Top Ring
Second Ring
Oil Ring
PER315-0034 PER315-0036 PER315-0033 PER315-0034.030 PER315-0036.030 PER315-0033.030 PER315-0034.040 PER315-0036.040 PER315-0034.060 PER315-0036.060 PER315-0033.060
4.000" 4.000" 4.000" 4.030" 4.030" 4.030" 4.040" 4.040" 4.060" 4.060" 4.060"
5/64" 1/16" 1/16" 5/64" 1/16" 1/16" 5/64" 1/16" 5/64" 1/16" 1/16"
5/64" 1/16" 1/16" 5/64" 1/16" 1/16" 5/64" 1/16" 5/64" 1/16" 1/16"
3/16" 3/16" 1/8" 3/16" 3/16" 1/8" 3/16" 3/16" 3/16" 3/16" 1/8"
2010
129-144OW10.indd 142
11/10/09 10:10:24 AM
PFC Racing Compounds Performance Friction pads are used by many top open wheel racers. Select the PFC compound listed below that best suits requirements. All sets are completely race ready pads requiring no bedding. All pads are boxed per axle set, four pads per box. All PFC compounds are painted black. Compound
Description
01 ......................One of the most advanced and popular compounds available from PFC. Slightly higher bite and torque for the first 2/3’s of the stop than the 83. The 01 has less torque scatter for improved modulation with excellent release and a flat torque curve with great control. Very easy on the rotors with very low wear. Requires finesse to prevent from overslowing the car or overwhelming the car’s set-up. Works great in all heat ranges. 03 ......................The latest in PFC pad technology. The 03 has higher bite and higher average torque than the 01 compound. There is a slight rise of torque with temperature to handle the most severe conditions. 03 has excellent release for improved modulation. Very easy on the rotors with wear on par with the 01 compound. Requires finesse to prevent from overslowing the car or overwhelming the car’s set-up. 81 ......................A race ready compound that replaces the 80 compound and provides smooth, stable high temperature torque and superior cold bite for dirt or asphalt. Quick release, low wear and excellent disc conditioning qualities make the pads ideal for low grip asphalt and dirt track including IMCA modifieds, dirt late models and street stocks. 97 ......................High cold bite with great modulation. Pads have a very flat torque curve with enhanced release characteristics. The 97 is very easy on the discs with very low wear. Works well in all heat ranges. A great rear pad when mixed with 01 in the front, also works well on the front and rear on milder braking asphalt or dirt tracks.
Pocket Tire Gauge PREDT105 Slim, pocket sized gauge reads 0-100 PSI and is accurate within +/-1.0%.
Professional Tire Gauge PREDT150-34CV Gauge reads 0-100 PSI and includes an air bleed button. Accurate within +/-1.0%.
Part No.
Description
Wilwood Superlite, Outlaw 3000/4000, Sierra XL PFR7751-01-20-44 ...... 01 Compound, Race Ready Set PFR7751-03-20-44 ...... 03 Compound, Race Ready Set PFR7751-81-20-44 ...... 81 Compound, Race Ready Set PFR7751-97-20-44 ...... 97 Compound, Race Ready Set
7751
Wilwood Dynalite, Outlaw 2000, Sierra Mini GN PFR7752-01-12-44 ...... 01 Compound, Race Ready Set PFR7752-81-12-44 ...... 81 Compound, Race Ready Set PFR7752-97-12-44 ...... 97 Compound, Race Ready Set
7752
Wilwood GN, Outlaw GN, Sierra GN, AP SC360 PFR7753-01-21-44 ...... 01 Compound, Race Ready Set Wilwood Dynalite Bridgebolt, Outlaw 2800 PFR7754-01-16-44 ...... 01 Compound, Race Ready Set PFR7754-81-16-44 ...... 81 Compound, Race Ready Set PFR7754-97-16-44 ...... 97 Compound, Race Ready Set
7753
Wilwood Dynalite Single, Outlaw 1000, Sierra Mini GN PFR7757-01-12-44 ...... 01 Compound, Race Ready Set PFR7757-81-12-44 ...... 81 Compound, Race Ready Set PFR7757-97-12-44 ...... 97 Compound, Race Ready Set
7754
7757
PFC PAD PART NUMBERING SYSTEM WWW-XX-YY-ZZ PFC Pad Shape
Compound
Overall Thickness (mm)
04= Std. Set, 4 Pads 44 = Race Ready, Full Set
Digital Electronic Compression Tester PREDC160-05CV Large, digital display compression tester provides accurate readings in 1 lb. increments. Includes hold and reset features, 18" flex hose and is adaptable to 14mm, 14mm long and 18mm spark plug holes.
Competition Tire Gauge PREDT160-10 Pressure, Inc.’s top-of-the-line tire gauge. Large display gauge reads 0-50 PSI and is accurate within +/-0.5%. Includes hard case.
Kenny Mackey
Photo: John Berglund
2010
129-144OW10.indd 143
143
11/10/09 10:10:38 AM
Gasket Makers
PermaPoxy PEX84101
Increased use of aluminum, bi-metal alloys, and high tech plastics has created the need for superior RTV silicone gasket makers. Permatex offers carded tubes or cartridges.
Easy-to-use, 2-part epoxy bonds metal, fiberglass, rubber, plastic, etc. Sold in a .84 oz. carded syringe.
Description
Carded
Carded Oz.
Cartridge
Cartridge Oz.
Temp.
Ultra Black Ultra Blue No Leak Ultra Copper Hi-Temp Ultra Grey Blue Sensor Safe Clear Black Hi-Temp Sensor Safe Hi-Temp
PEX82180 PEX81724
3.35 3.35
PEX24105 –
10.6 –
-65° To 500° -65° To 500°
PEX81878 PEX82194 PEX80022 PEX80050 PEX81158 PEX81160 PEX81422
3 3.5 3 3 3 3 3
– – – PEX80855 – PEX81409 –
– – – 11 – 11 –
-75° To 700° -65° To 500° -65° To 500° -75° To 400° -75° To 400° -65° To 650° -65° To 650°
Thread Sealant With Teflon A general purpose fitting Sealant. Remains pliable at high or low temperatures. Effective from -65° to 300°F. Part No.
Description
PEX80631..........1 Oz. Tube PEX80632..........4 Oz. Can
Threadlockers Developed to positively lock and seal threaded fasteners. Threadlockers fill the space between threads on metal parts and then harden for a tough, adhesive bond and seal.
The Right Stuff Gasket Maker Repair leaks quickly with The Right Stuff leakproof gasket maker. Modern rubber gasket technology is incorporated in this product which is used on production lines by GM, Ford and Chrysler. Temperature range is -75° to 450°F. Part No.
Part No.
Description
PEX24200..........Medium Strength Blue, Carded 6ml Tube PEX24240..........Medium Strength Blue, Carded 36ml Bottle PEX24300..........Medium Strength Blue, Carded 10ml Bottle PEX27100..........Hi-Strength Red, Carded 6ml Tube PEX27140..........High Strength Red, Carded 36ml Bottle PEX27200..........Hi-Temp/Hi-Strength Red, Carded 10ml Bottle
Description
PEX25223..........4 Oz. Tube PEX25224..........7 Oz. Tube PEX29208..........5 Oz. Cartridge PEX33694..........10 Oz. Tube
Anti-Seize Lubricant High Performance Thread Sealant PEX56521
Blend of aluminum, copper and graphite lubricants prevents galling, corrosion and seizing for easier disassembly. Works well anywhere, including lubrication of slip-on collectors, adjustable header tubes or any other exhaust tubing for easier disassembly. Effective from -60° to 1200°F.
Formulated for tapered pipe fittings, sealant replaces Teflon tape or pipe dope. Works well on head bolts (that pass through water jackets), sending units, sensors, fuel fittings, oil and coolant lines, and rear axle fill plugs. 50ml tube.
Part No.
High Temperature Thread Sealants
Ultra-Slick Engine Assembly Lube PEX81950
Sealant is used to lock and seal threaded fittings or bolts. Often used on head bolts (that enter water jackets), oil sending units, fuel fittings, rear axle plugs, brake and power steering fittings, etc. Part No.
Description
PEX80078..........8 Oz. Brush-Top Bottle PEX81343..........1 Oz. Carded Tube
Ultra-Slick prevents galling and scuffing during critical initial engine start-up. Superior adhesion qualities meet or exceed stock performance specifications for engine assembly Lubricant. Use on bearings, camshafts, lifters, valves, guides, and rocker shaft assemblies. 4 oz. bottle.
Description
PEX59214..........6ml Carded Tube PEX59235..........50ml Carded Tube
Fast Orange Hand Cleaners The #1 selling, biodegradable, waterless solvent-free hand cleaner. Contains no harsh chemicals, mineral oils or ammonia that can irritate cuts and abrasions. Part No.
Description
PEX25108..........Fine Pumice Cleaner, 7.5 Oz. Bottle PEX25116..........Fine Pumice Cleaner, 15 Oz. Bottle PEX25218..........Fine Pumice Cleaner, 1 Gal. Bottle With Pump PEX25025..........Hand Cleaner Wipes, 25 Count
Ground Shipment Only On All Permatex Products Mark Irwin
144
Photo: Skip Konkle
2010
129-144OW10.indd 144
11/10/09 10:10:57 AM
Pro Series Dry Sump Pumps
Scavenge Filters
Each CNC-machined aluminum rotor style pump is fitted with tubular dowels and O-rings for accurate alignment and leak-free operation. Pro Series Pumps have internal scavenge manifolds and bolt on fittings for lower profile and easier installation. Available in 3, 4 and 5 stage versions.
Peterson’s aluminum billet Inline Filters remove harmful debris from the oil before it reaches the pump. The free-flowing units have twice the filter area of dry sump pan screens.
Three-Stage Cam Drive Dry Sump Oil Pump PTR03-3501 Efficient gerotor pump for small block Chevy has a modular internal scavenge manifold with bolt-on fittings for a compact, low profile. Pump may be fitted with numerous options.
Pro Rotor Flange Style Pump Fittings Part No.
Description
Scavenge In/Pressure Out Small 4-Bolt Flange PTR15-1101 ......-10AN x Small Port Pro Rotor PTR15-1102 ......-12AN x Small Port Pro Rotor PTR15-1141 ......-10AN x 45° Small Port Pro Rotor PTR15-1142 ......-12AN x 45° Small Port Pro Rotor Rear Inlet Pressure In/Scavenge Out Large 4-Bolt Flange PTR15-1103 ......-12AN x Large Port Pro Rotor PTR15-1104 ......-16AN x Large Port Pro Rotor PTR15-1141 PTR15-1105 ......-12AN x 90° Large Port Pro Rotor PTR15-1106 ......-16AN x 90° Large Port Pro Rotor Side Inlet Pressure In, Oval Port PTR15-1109 ......-16AN x Oval Port Pro Rotor PTR15-1110 ......-12AN x Oval Port Pro Rotor
400 Series Inline Oil Filters NEW! Inline oil filters have 25% more filter area than similar units and are available in 60 and 75 micron configurations for engine oil. 2-1/2" filter bodies are hard anodized. Filter mounting brackets are sold separately. Part No.
Description
Inline Oil Filters PTR09-0438 ......-12AN Filter, 75 Micron Element, w/o Bypass PTR09-0439 ......-16AN Filter, 75 Micron Element, w/o Bypass PTR09-0452 ......-12AN Filter, 60 Micron Element, w/Bypass PTR09-0457 ......-10AN Filter, 60 Micron Element, w/o Bypass PTR09-0458 ......-12AN Filter, 60 Micron Element, w/o Bypass Filter Mounting Brackets (Sold In Pairs) PTR09-0492 ......Filter Mount Bracket, Fits 1-1/2" Dia. Tubing PTR09-0493 ......Filter Mount Bracket, Fits 1-3/4" Dia. Tubing PTR09-0494 ......Filter Mount Bracket, Firewall Mount Replacement Element PTR09-0440 ......75 Micron Element, -8, -10, -12, -16AN Filters Gold/Blue Endcaps PTR09-0460 ......60 Micron Element, -8, -10, -12, -16AN Filters Gold/Blue Endcaps
Dry Sump Pan Filter Billet aluminum filter bolts directly to the pan fitting. Screen protects dry sump pump from engine debris and can be inspected without removing pan. 2-1/4" long body. Part No.
Description
PTR09-0404 ......Filter With -12AN fitting PTR09-0411 ......Replacement Screen
Part No.
Description
Inline Scavenge Filters PTR09-0401 ......-8AN, Use On Lifter Valley Scavenge Or With Rear End Pumps PTR09-0402 ......-10AN, Use With Dry Sump Pan Or Lifter Valley Scavenge Lines PTR09-0403 ......-12AN, Use With Dry Sump Pan Lines PTR09-0405 ......-16AN Inline 90° Scavenge Filters PTR09-0406 ......-8AN, Use On Lifter Valley Scavenge Or With Rear End Pumps PTR09-0407 ......-10AN, Use With Dry Sump Pan Or Lifter Valley Scavenge Lines PTR09-0408 ......-12AN, Use On Dry Sump Pan Replacement Screens PTR09-0410 ......Fits PTR09-0402, PTR09-0403, PTR09-0407, PTR09-0408 PTR09-0411 ......Fits PTR09-0401, PTR09-0406
Dry Sump Pump Fittings - Male Thread Large bore, anodized fittings are radiused to provide maximum oil flow. Part No.
Description
PTR15-1005 ......-10AN x -10AN Port PTR15-1006 ......-12AN x -10AN Port PTR15-1007 ......-16AN x -10AN Port
Y-Manifolds When multiple oil lines need to be combined in a single high flow line, the tubular or billet aluminum Y-manifolds gets the job done. Part No.
Description
PTR10-0006 ......Y-Manifold, Aluminum Tube, -12, -12, -12 PTR10-0007 ......Y-Manifold, Aluminum Tube, -16, -12, -12 PTR10-0033 ......Y-Manifold, Billet Aluminum, -10, -8, -8 PTR10-0041 ......4-Way Y-Manifold, Billet Aluminum, -8, -6, -6, -6
Oil Filter Block Off Plates Oil filter block off plates facilitate the installation of wet and dry sump oil pressure lines to the stock oil filter pad. Plates are made from aluminum billet and include mounting hardware. Part No.
Description
PTR09-0002 ......Chevy V8 with -12AN fitting PTR09-0004 ......Chevy Bow Tie Block with -12AN fitting PTR09-0011 ......Ford V8 with -12AN fitting PTR09-0020 ......Replacement Square O-ring for 09-0001 thru 09-0004
One Way Valve Pop Off PTR08-0450 Breather assembly is installed in valve cover on engine’s running crankcase in vacuum condition. Valve seals engine from air entering engine, but opens in the event of crankcase pressure, allowing crankcase to vent. Includes -12AN bung to weld to aluminum valve cover.
Screw-In Breather PTR08-0415 Internally baffled breather has -12AN male threads to fit bung on Peterson dry sump tanks. May also be used on valve covers.
2010
145-160OW10.indd 145
PTR10-0041
145
11/10/09 10:13:55 AM
Oil Pressure Gauge Fittings
Dry Sump Oil Tanks
Special fittings, designed by Karl Kinser, gets the oil pressure gauge line up where it is more accessible. Fitting is 1/8" NPT on engine end, while the gauge connection is -4AN.
“New Generation” oil tanks are built with stateof-the-art components and internal baffling, which prevents oil aeration while helping to maintain a tall column of oil over the pick-up. Easily disassembled and tops can be rotated for easy placement of fittings. Brackets sold separately.
Part No.
Description
PTR15-1040 ......Oil Pressure Gauge Fitting, 90° PTR15-1041 ......Oil Pressure Gauge Fitting, Straight
SB Chevy Lifter Valley Riser Tubes PTR15-1050 Tubes are installed in the lifter drain back holes to prevent oil drain back while still allowing the engine to “breathe”. Filter screens rated at 70 micron are installed in the tube opening. Installation requires that the lifter drain back holes be tapped for 1/4" NPT. Hex top is 9/16" and bottom is 1/4" NPT. Set of eight.
Fuel Pressure Regulator Fittings Machined from aluminum and anodized, fittings have large bores and are radiused on the inlet sides for optimum flow. Part No.
Description
PTR15-1001 ......Fuel Regulator -8 x -6 Port PTR15-1002 ......Fuel Regulator -10 x -8 Port PTR15-1003 ......Fuel Regulator -6 x -6 Port PTR15-1004 ......Fuel Regulator -8 x -8 Port
Inline Fuel Filters Lightweight, durable filters have reusable, pleated stainless steel screens and hardcoat anodized bodies for compatibility with all fuels. Filters are offered in two versions; 400 Series and Ball Valve Style. Part No.
Part No.
Description
PTR08-0005*.....2 Gal. Single Scavenge Inlet, 19.5" Ht. x 6" Dia. PTR08-0007*.....2.5 Gal. Single Scavenge Inlet, 24" Ht. x 6" Dia. PTR08-0008*.....2.5 Gal. Dual Scavenge Inlet, 24" Ht. x 6" Dia. PTR08-0009*.....3 Gal. Single Scavenge Inlet, 16" Ht. x 9" Dia. PTR08-0011† .....4 Gal. Single Scavenge Inlet, 19" Ht. x 9" Dia. PTR08-0110 ......Replacement O-Ring For 6" Dia. Tanks *Use Mount Bracket PTR08-0100. †Use Mount Bracket PTR08-0101
Dry Sump Oil Tank Mounting Brackets Mounting brackets are machined from billet aluminum and include EPDM rubber-lined stainless steel straps. Sold in pairs. Part No.
Description
PTR08-0100 ......For 6" Dia. Tanks PTR08-0101 ......For 9" Dia. Tanks
Dry Sump Tank Fittings Anodized aluminum fittings complete the installation of any Peterson dry sump tank. Part No.
Description
PTR08-0501 ......-10AN Hose x -12AN Port PTR08-0502 ......-12AN Hose x -12AN Port PTR08-0503 ......-16AN Hose x -12AN Port PTR08-0504 ......-6AN Port Plug (Tank Drain) PTR08-0505 ......-12AN Port Plug (Tank Drain) PTR08-0506 ......O-Ring Kit, -12AN (5 Per Pack)
Description
400 Series - 2-1/2" O.D. x 7" Long PTR09-0468 ......-12AN, -6AN Return Ports PTR09-0484 ......-12AN Without Bypass Ball Valve Style - 2" O.D. x 5" Long PTR09-0603 ......-12AN, 45 Micron PTR09-0609 ......-12AN, 60 Micron PTR09-0627 ......-12AN, 100 Micron
In-Tank Fuel Filters Filters are race proven by the World of Outlaws. Stainless, pleated filters, available in straight and 90° styles, easily attach by slipping the pick-up hose over the 3/4" neck and securing with a clamp. Part No.
Description
PTR09-1460 ......Straight 60 Micron PTR09-1461 ......90° 60 Micron PTR09-1480 ......Straight 45 Micron PTR09-1481 ......90° 45 Micron
Oil Tank Heaters Pre-heating of dry or wet sump systems on a race engine ensures good lubrication upon initial start-up. Immersion-style heater does a great job of pre-heating and only requires welding a threaded bung into the tank. Wrap around styles can be glued to the outside of the tank or pan. Part No.
Description
PTR08-0300 ......300 Watt Immersion Style 110 Volt With Detachable Cord Set, Steel And Aluminum 1/2" NPT Weld Bungs PTR08-0301 ......300 Watt Wrap Around Pad, 2" x 15", 110 Volt With Detachable Cord Set, Attaches With Hi-Temp RTV Silicone PTR08-0302 ......400 Watt Wrap Around Pad, 4" x 10", 110 Volt With Detachable Cord Set, Attaches With Hi-Temp RTV Silicone
Lightweight Cap And Bung Assembly PTR08-0611 Billet aluminum 1-7/16" cap and bung assembly is ideal when fabricating custom tanks. Cap is red anodized.
146
2010
145-160OW10.indd 146
11/10/09 10:14:19 AM
Teflon Engine Seals
SB Chevy Manifold End Rail Spacers
Hard-to-find Teflon engine seals assure maximum vacuum levels for engines with dry sump oil systems. Seals are manufactured by TKO Competition Development.
Fill the gap between the manifold and the lifter valley end rails when using raised port cylinder heads on small block Chevy engines. Sold in pairs, Spacers include four 3/16" roll pins for retention. Drilling of the block is required for installation.
Part No.
Part No.
Description
PTRSM86410 ........... Rear Main Seal, SB Chevy 400 PTRSM86586 ........... Jesel Front Cover, Chevy Cam Seal PTRSM86587 ........... Jesel Front Cover, SB Chevy Crank Seal PTRSM86625 ........... Rear Main Seal, SB Chevy 350 PTRSM86990 ........... Front Crank Seal, SB Chevy
Description
PTR09-1060 ..... Spacer Set, .125" Thick PTR09-1061 ..... Spacer Set, .187" Thick PTR09-1062 ..... Spacer Set, .250" Thick PTR09-1063 ..... Spacer Set, .375" Thick
NEW VENDOR
Small Block Chevy Dual Idler Gear Drive PTJ327-1C CNC-machined, billet steel gear drive fits under stock timing cover, assures accurate timing and an easy installation. Camshaft and crankshaft gears, dual idler gear assembly and necessary hardware included. Kirk Cheney
Photo: Doug Swift
Freeze Plug Kits Aerosol Engine Enamels
Ground Shipment Only
Skin packaged cards or bagged kits contain all freeze and pipe plugs necessary for a short block. Available in traditional steel or brass. Application
Steel Part No.
Brass Part No.
Non Carded Steel
SB Chevy PIOPE100 PIOPE100B PIOPE100R 262-350 SB Chevy 400 PIOPE101 PIOPE101B â&#x20AC;&#x201C;
Engine enamels dry quickly to a tough, durable finish resistant to blistering and peeling. Choose from a variety of colors. Part No.
Description
PIOT-10-A........ Chevy Orange PIOT-11-A........ Ford Blue PIOT-17-A........ Ford Dark Blue PIOT-19-A........ Chevy Blue PIOT-26-A........ Universal Black PIOT-27-A........ Aluminum PIOT-37-A........ Gloss Gray PIOT-50-A........ Light Gray Primer PIOT-52-A........ Red Oxide Primer PIOT-54-A........ Flat Black
Part No.
Description
PIOT-55-A ......... Gloss White PIOT-56-A ......... High Heat Black PIOT-58-A ......... Cast Iron Gray PIOT-59-A ......... Clear PIOT-60-A ......... Universal Gray PIOT-61-A ......... Lo-Gloss Black PIOT-62-A ......... High Heat Aluminum PIOT-63-A ......... High Heat Cast Iron Gray PIOT-64-A ......... Black Primer PIOT-65-A ......... Stainless Steel
Robert Huisken
Photo: Doug Swift
2010
145-160OW10.indd 147
147
11/10/09 10:14:37 AM
Trailer Door Cabinets Cabinets are heli-arc welded .090" aluminum for long term strength and durability. Each cabinet includes a fold-down table for added work space, paper towel holder, and enough shelving to hold aerosol cans, oil containers, cleaners, etc. Part No.
Description
PIT320 ...............Door Cabinet, 30" H. x 25" W. x 5.5" D. PIT321 ...............Jr. Door Cabinet, 19.5" H. x 12" W. x 4.5" D.
25th Anniversary Edition Trailer Door Cabinet PIT320A Similar to Pit Pal's original trailer door cabinet with wider and deeper shelves to store up to 20 qts. of oil. Aluminum cabinet is 27" wide x 32" high x 6-3/4" deep with two paper towel holders and a top shelf that holds up to nine aerosol cans.
Trailer Fuel Jug Racks Heli-arc welded .090" aluminum racks mount easily on trailer floor or wall. Racks will hold round or square fuel jugs safely and securely inside trailer. Part No.
Description
PIT181 ...............2 Jug Rack, 23" L. x 12" D. x 13" H. PIT182 ...............3 Jug Rack, 34-1/2" L. x 12" D. x 13" H. PIT183 ...............4 Jug Rack, 46" L. x 12" D. x 13" H.
Helmet Shelves Store helmet, neck brace, gloves, ear protectors and related items, and hang up to eight uniforms beneath shelf. Shelves are fabricated from .090" aluminum for maximum strength. Part No.
Description
PIT330 ...............1 Bay Helmet Shelf, 14-1/2" L. x 12" H. x 15" D. PIT331 ...............2 Bay Helmet Shelf, 28-1/2" L. x 12" H. x 15" D.
Hanging Brackets Oil Storage Cabinet PIT310
Hanging brackets store all hoses and electrical cords neatly. Gives shop or trailer a professional look.
Store up to eight aerosol cans on the top shelf and as many as 29 quarts of oil or filters on the lower shelves. Dimensions: 24-1/2" H. x 36" W. x 5-1/2" D.
Part No.
Description
PIT220 ...............Electrical Cord Bracket PIT221 ...............Air Hose Bracket
Deluxe Air Bracket PIT223 Junior Oil Cabinet PIT313 Smaller, heavy duty .090" aluminum cabinet unit neatly stores 12 quarts of oil and is a great way to help organize the home, garage or shop. Dimensions: 16" H. x 16" W. x 5-1/2" D.
All-Purpose Bottle Shelves Store miscellaneous spray bottles for easy access. Part No.
Description
Great for storing air hose, chuck, air gauge, small tools, etc.
Tie Down Hangers Store ratchet tie downs neatly on trailer wall and create more floor space at the same time. Small bracket stores two ratchet tie downs, large bracket can store several. Fabricated from .090" aluminum for durability. Part No.
Description
PIT217 ...............Single Small Bracket, 8" L. x 3-1/4" D. PIT218 ...............Single Large Bracket, 18" L. x 3-1/4" D. PIT222 ...............Two Small Brackets, 8" L. x 3-1/4" D.
PIT110 ...............4 Container, 10" x 5" Deep PIT111 ...............6 Container, 14-1/2" x 5" Deep
Paper Towel Holder PIT226 Enjoy easy access to paper towels.
Aerosol Spray Can Shelves Strong .090" aluminum shelves fit anywhere for convenience, with room for 8 or 12 aerosol cans. Part No.
Description
PIT100 ...............8 Can, 21-1/2" x 2-3/4" PIT101 ...............12 Can, 32-1/2" x 2-3/4"
148
Universal Hanger PIT170 Keep helmet, driving jacket and gear handy. Hanger is 3-1/2" wide x 4" high x 2-1/2" deep.
2010
145-160OW10.indd 148
11/10/09 10:15:00 AM
Nitrogen Bottle Storage Cradle PIT257
Gear Storage Racks Heavy duty aluminum rack will hold up to twelve quick PIT144 change gear cases. Available in horizontal and vertical versions. Part No.
PIT143
Brackets firmly fasten to the studs in trailer walls to keep 9-1/4" dia. nitrogen bottles safe and secure. Holes are drilled on 16" centers to line up with the studs.
Description
PIT143 ...............Horizontal Gear Storage Rack, 20-1/2" W. x 22" H. x 7" D. PIT144 ...............Vertical Gear Storage Rack, 24" W. x 9-3/4" H. x 7" D.
Floor Jack Mounts PIT190 Mounts keep jack secure for the long haul. Drop jack in between angles and position front wheels in semi-circular front shells. The jack will remain in place during sudden stops, starts and tight corners.
8-Piece Shock Rack PIT136 Two-piece metal shock rack holds eight shocks, with or without springs. Completely powder coated, with pins.
Jack Not Included
Jack In A Pouch PIT194 Wall mounted pouch keeps pit jack contained during transport, and adds floor space. TIGwelded aluminum, .090" thick pouch is 17-1/2" wide x 24-1/4" high x 5-1/16" deep.
12-Piece Shock Rack PIT1037 Rack holds up to 12 shocks. Because the unit mounts closer to the wall, it will not hold shocks with coil over springs.
D Cell Flashlight Holder PIT216 Handy, .090" thick aluminum Holder secures any “D” cell flashlight to tool boxes, trailer walls, etc.
Torsion Bar Rack PIT134 The only way to store torsion bars while hauler is in transit. Drilled on 16" centers to line up with trailer wall studs, unique rack can hold up to 12 bars.
Engine Sling PIT201 Perform quick engine changes. Simply hook the engine sling to engine puller and attach the four straps to header studs or exhaust bolt holes. Corrosion resistant, plated 28" wide engine sling includes (4) royal blue 22" long polyester straps.
Adjustable Tire Rack PIT295
E-Track PITETH-1 An ideal horizontal attachment point on floors, walls or ceilings. Zinc plated steel E-Track is 5' long.
Unique heavy duty steel rack mounts on 16" centers and adjust from 18" to 26" for different tire diameters. Quickly unfolds from the wall and adjusts to full length. Removable lock pins allow easy storage.
Gauge Pouch PIT228
Track Strap PIT074118 Track strap, is 2" wide x 6" long with a 1,000 lb. rating. Typically used with Pit Pal’s E-Track or A-Track to adapt as a tie down hanger.
Gauge Not Included
Secures tire gauges up to 4-1/8" dia.
2010
145-160OW10.indd 149
149
11/10/09 10:15:25 AM
5/8" Spark Plug Socket POW301150
Pro Head CC Kits Kits include everything needed to CC combustion chambers, and intake and exhaust runners. Glass burets are compatible with alcohol, parts washer solvent, or any other suitable fluid and are marked off in .2cc increments for easy reading. Part No.
Special tool eases spark plug installation, even when header tube interference make installation impossible with traditional sockets. CNC-machined, stainless steel tool will sneak into virtually any cylinder head/exhaust header combination.
Description
POW351140 ............. 125cc X .2cc POW351150 ............. 100cc X .2cc
Cubic Inch Tester POW301000
Rimac Spring Tester POW360070
Cubic inch testers tend to keep everyone honest. With a cylinder capacity of 84 cubic inches in 1/2" increments, the tool can pump a V8 as large as 670 cubic inches total. Easy to use, tester includes a wooden carrying case, 14mm spark plug adapters, hose, thermometer, temperature correction factors and instructions.
The Rimac Bench Top Spring Tester has been the industry standard for over 70 years and is the only sure way to check spring height versus spring pressure. Capably handles valve, transmission, clutch and other springs up to 2" dia. and 4-1/2" free length. Calibrated test spring enables testing and recalibrating in the field. Measures 0-1000 lb. x 5 lb.
Pro Spark Plug Viewer POW301080 View and read spark plugs easily. Lighted viewer features 10X power magnification for easy spark plug inspection. Powered by two “C” batteries (not included).
Magnetic Angle Finders POW301375 Features an easy-to-read large diameter face and a magnetic base. This tool is perfect for setting up machinery and suspensions, checking pinion and spoiler angles, etc. It is accurate to 1/2°.
Wet Sump Oil Pans
Aluminum Wet Sump Oil Pans
Pro/Cam’s unique small block Chevy pans increase horsepower and decrease oil temperature by keeping oil away from the crank. Pans have adjustable crank scrapers to customize each pan to a par ticular crankshaft/rod combination. Maintain oil pressure all the way around the track! Set-up instructions and templates for clearance are included. Available in 6.5" and 7" depths. All Pro/Cam Pans must be used with a Pro/Cam Pump/ Pickup combination. System part numbers include oil pan, customized high volume oil pump and custom pickup (assembled). Standard volume pump also available.
Small block Chevy pans with billet end caps and rails, and built in oil collection screens are specifically designed for circle track racing. Offered in two depths, pans include high volume oil pump and pickup.
Description
6.5" Wet Sump Pan 7" Wet Sump Pan 6.5" Narrow Wet Sump Pan 7" Narrow Wet Sump Pan
150
System Part No.
Pan Part No.
PRC9137-6 PRC9137-A6 PRC9137-7 PRC9137-A7 PRC9137-6N PRC9137-A6N PRC9137-7N PRC9137-A7N
Pump/Pickup Part No.
PRC9137-B6 PRC9137-B7 PRC9137-B6N PRC9137-B7N
Part No.
Description
PRC9138-6-SBC ....... Aluminum 6.5" Wet Sump Pan PRC9138-7-SBC ....... Aluminum 7" Wet Sump Pan
Economy Dry Sump Oil Pan PRC9132 Small block Chevy economy pan has many features common to more costly units. Steel pan is 5-1/2" deep and has a large directional screen for increased oil from collection. Crank scraper removes excess oil off the rotating assembly for increased horsepower. Pan includes three fittings on the right side.
2010
145-160OW10.indd 150
11/10/09 10:15:57 AM
Ground Shipment Only On All Pro-Blend Products
Hot Lap II PRB6000TS Super Quick For 25 Laps
CTX-2 PRB1650 Undetectable Fuel Additive
Works on asphalt or dirt. Tires run 18-22° cooler and last up to 50% longer. Hot Lap II is designed for races with 25 laps or less. Extends tire life and is undetectable. One gallon can.
Add up to 40 horsepower. Add 1 gallon of CTX-2 to 4 gallons of gas. One gallon can.
Hot Lap 3 PRB3030 NEW!
40 Below PRB4032 Stops Overheating
Reduce lap times by as much as five tenths of a second by putting one ounce per inch of tread width of Hot Lap 3 inside the tire. Cold roll for the times specified for a particular type of track surface and let stand for 48 hours before a race. Product is "Sniffer-Proof" and will definitely cause a drop in the durometer reading. One quart can.
Reduces water temperature up to 40°F. Keeps temperature under control while drafting, racing, sitting in the pits, in traffic, cruising, towing, climbing, or running with restricted air flow. 32 oz. container.
Fast Forward PRB1616 Increases Horsepower Hot Lap Victory Lane PRB5000 Super Quick Up To 50 Laps Similar to Hot lap II but lasts longer and is detectable. Use on asphalt or dirt. One gallon can.
Produces a startling increase in mid-range torque and can be used with gas or alcohol. Use on circle track, drag racing, street, towing, bikes, watercraft and other high performance applications. 16 oz. can.
Alcohol Fuel Lube PRB8400 Lubricates Entire Fuel System Hot Lap 101 PRB4000 NEW! Especially formulated to soften tires and create bite. Hot Lap 101 works on asphalt and dirt tires and can help natural and synthetic rubber tires resist blistering, run 10-15 degrees cooler, yet still stick to the track surface and is detectable. One gallon can.
Quik Lap PRB7032LMT Last Minute Treatment Apply to tires the day of the race. Reduces lap time 1-3 tenths and maintains durometer for the first 25 laps. Use on asphalt or dirt. Undetectable. 30 oz. can.
Tire Cleaner PRB7050 Racing Tire Cleaner Removes the glaze on sticker tires and opens the pores to ready tire for Hot Lap treatment. 30 oz. can.
Blends with alcohol or nitromethane to lubricate the entire fuel system. Add 16 oz. to 50 gallons. 16 oz. can.
Engine Racing Concentrate PRB1600 Must For All Performance Engines Cools oil up to 52° and eliminates oil starvation, bearing failure, piston scuffing, galling, blueing, metal transfer, valve train drag and foaming. Also helps control condensation in gasoline or alcohol engines. 16 oz. can.
Racing Oil Stabilizer PRB8062 NEW! Specialized oil additive eliminates dry starts, cools oil temperatures up to 38°, reduces friction and dramatically reduces internal wear. May also be used to cool manual transmissions and differentials. 28 oz. bottle.
Pro-Tuff Gear Lube PRB8398 Eliminates Ring And Pinion Failure Reduces gear lube temperature up to 60°. Triples gear life in transmissions, rear ends and transaxles and stops bluing and galling. Absorbs shock and loading. 16 oz. can.
2010
145-160OW10.indd 151
151
11/10/09 10:16:18 AM
Dual Gauge Leakdown Tester PFM66839 Tester may be used to check piston ring, valve and head gasket seal. Includes flex hose and spark plug adapters.
Valve Lash Wrench Set T-handle Allen wrench and adjuster wrench. Simplify valve lash adjustment, and cut adjustment time in half. Part No.
Description
PFM66778 .........1/2" Adjuster, 3/16" And 1/8" T-Handle Allen Wrenches PFM66779 .........7/16" Adjuster, 1/8" T-Handle Allen Wrench PFM66780 .........9/16" Adjuster, 3/16" And 7/32" T-Handle Allen Wrenches PFM66781 .........5/8" Adjuster, 3/16" And 7/32" T-Handle Allen Wrenches
Valve Spring Height Micrometer PFM66902 Measure valve spring height accurately on an assembled engine. Install the micrometer in place of valve spring and rotate the tool until the valve, retainer and locks are tight. Tool has a range of 1.600" to 2.100" and works with most V8’s.
Stud Mount Valve Spring Compressor PFM66784 Quickly remove valve springs from assembled engines with 3/8" or 7/16" rocker studs.
Adjustable Ring Compressor Tapered compressor eases piston installation and is compatible with a range of bore sizes. More economical than single bore size compressors. Part No.
Universal Camshaft Degreeing Kit PFM66787 All-in-one kit includes the tools required to properly degree a camshaft with the cylinder heads installed. May also be used to check lobe lift, valve lift, etc. Kit is packaged in a foam-lined case and includes 9" degree wheel and pointer, dial indicator and stand, two valve checking springs, 14mm TDC locator, clamp kit and instructions. Select tools are also offered separately. Part No.
Description
PFM66791 .........9" Camshaft Degree Wheel PFM66792 .........TDC Locator PFM66797 .........Magnetic Deck Bridge PFM66830 .........Camshaft Checking Fixture
Universal Oil Filter Cutter PFM66490 Troubleshooting your oil management system requires a look at the filter. That’s now easier than before with the PROFORM oil filter cutter. Think of a simple can opener and you’ve got the concept behind this trick tool. Lock-down holds your cartridge filter in place while you rotate the filter to make a clean cut.
Description
PFM66766 .........Adjustable Ring Compressor, 4.000"-4.090" Bore PFM66767 .........Adjustable Ring Compressor, 4.125"-4.205" Bore PFM66768 .........Adjustable Ring Compressor, 4.205"-4.310" Bore
Manual Piston Ring Filer File piston rings quickly and precisely. Part No.
Description
PFM66785 .........Manual Piston Ring Filer PFM66786 .........Replacement Carbide Wheel
Electric Piston Ring Filer PFM66765 Powerful, rechargeable 12-volt battery powered tool accurately sets and files ring end gaps and includes two 120-grit grinding wheels and recharger.
Rod Bolt Stretch Gauge PFM66788 Tighten rod bolts properly and with precision. Position tool on the bolt to measure bolt stretch during tightening. Works with bolts up to 2.75" long.
“No-Mess” Funnel PFM68068 Patented, ball-n-hook design shuts off flow and retains excess fluid to prevent spillage or overfilling.
Valve Spring Pressure Tester PFM67597 Need to check spring pressure at the track? No problem with the PROFORM stud style valve spring compressor. This fully adjustable tool fits easily onto your rocker arm for pressure checks and will measure pressure up to 600 lbs.
Steve Thomas
152
Photo: Jim DenHamer
2010
145-160OW10.indd 152
11/10/09 10:16:46 AM
Aluminum 50/50 And Split Valve Shocks
“AC” Series Aluminum Threaded Body Shocks
Part No.
The “AC” Series shock is made from a high-tech aluminum impact extrusion and machined to the highest of standards. Available in strokes from 5" to 9", threaded-body shock eliminates the threaded tube from the coil-over kit. Shocks include bearing ends.
Rebound Adjustable Threaded Body Shocks User-friendly shocks can be adjusted by turning the rebound adjuster from 3 to 8 or 5 to 11. Shocks have the same acceleration ramps and blow-off curves as standard Pro Shocks. Available in 7" and 9" strokes. 7" Stroke
9" Stroke
Compression
Rebound
PROAC733-8B PROAC743-8B PROAC745-14B PROAC753-8B PROAC755-14B PROAC763-8B PROAC766-11B
PROAC933-8B PROAC943-8B – PROAC953-8B – PROAC963-8B –
3 4 4 5 5 6 6
3-8 3-8 5-14 3-8 5-14 3-8 6-11
Damping Compression/Rebound
5" Stroke - Length: Collapsed 10.50"/Extended 15.50" PROAC530B 3/3 PROAC540B 4/4 PROAC550B 5/5 PROAC557B 5/7 PROAC560B 6/6 PROAC570B 7/7 7" Stroke - Length: Collapsed 12.50"/Extended 19.50" PROAC730B 3/3 PROAC735B 3/5 PROAC740B 4/4 PROAC746B 4/6 PROAC750B 5/5 PROAC753B 5/3 PROAC754B 5/4 PROAC757B 5/7 PROAC760B 6/6 PROAC763B 6/3 PROAC764B 6/4 PROAC770B 7/7 PROAC791B 9/1 9" Stroke - Length: Collapsed 14.50"/Extended 23.50" PROAC930B 3/3 PROAC935B 3/5 PROAC940B 4/4 PROAC94.5B 4.5/4.5 PROAC94-05B 4/0.5 PROAC945B 4/5 PROAC946B 4/6 PROAC947B 4/7 PROAC950B 5/5 PROAC95-05B 5/0.5 PROAC953B 5/3 PROAC956B 5/6 PROAC960B 6/6
Coil-Over Kit PROC320 Aluminum coil-over kit for 2" body “AC” shocks. Includes upper spring seat, threaded adjuster and pin.
PROAC550B
PROAC730B
Double Adjustable Threaded Body Shocks Double adjustable threaded body shocks use a patented rebound system and compression can be adjusted turning a thumb wheel. Tighten compression by turning the thumb wheel clockwise or soften by turning counterclockwise. A physical stop limits rotation to 360°. 6" Stroke
7" Stroke
8" Stroke
9" Stroke
PROAC637-38B PROAC737-38B PROAC837-38B PROAC937-38B – PROAC737-611B – –
Comp. Rebound
3-7 3-7
3-8 6-11
Shock Covers DOMDSC High impact plastic covers help protect expensive shock absorbers from rocks and debris. Secures to shocks with wire ties.
Steve Irwin
Photo: Skip Konkle (Upper) John Berglund (lower)
2010
145-160OW10.indd 153
153
11/10/09 10:17:12 AM
“A” Series Aluminum Smooth Body Shocks
Aluminum 50/50 And Split Valve Shocks Part No.
High tech “A” Series aluminum smooth body shocks are available in strokes of 5" to 9". Simply purchase PROC300 to convert these shocks to coil over units. Includes bearing ends.
Rebound Adjustable Smooth Body Shocks Pick the compression damping shock number and turn the rebound adjuster (3-4-5-6-7-8 or 6-7-8-9-10-11) to the corresponding number. Shocks have the same acceleration ramps and blow-off curves as standard Pro Shocks. Available in 7", 8" and 9" strokes. 7" Stroke
8" Stroke
9" Stroke
Compression
Rebound
PROA733-8B – PROA743-8B – PROA753-8B PROA763-8B
PROA833-8B PROA836-11B PROA843-8B PROA846-11B PROA853-8B –
PROA933-8B PROA936-11B PROA943-8B PROA946-11B PROA953-8B –
3 3 4 4 5 6
3-8 6-11 3-8 6-11 3-8 3-8
Coil-Over Kit PROC300 Aluminum coil-over kit for regular size 2" body “A” series coil over shocks.
Double Adjustable Smooth Body Shocks Double adjustable smooth body shocks incorporate Pro’s patented rebound system. Compression can be tightened by turning the thumb wheel clockwise or softened by turning it counterclockwise. A physical stop limits rotation to 360°. 7" Stroke
8" Stroke
9" Stroke
Comp.
Rebound
PROA737-38B –
PROA837-38B –
PROA937-38B PROA937-611B
3-7 3-7
3-8 6-11
Plastic Shock Cover DMISRC2940
Damping Compression/Rebound
5" Stroke - Length: Collapsed 10.50"/Extended 15.50" PROA550B 5/5 PROA560B 6/6 PROA570B 7/7 6" Stroke - Length: Collapsed 11.50"/Extended 17.50" PROA640B 4/4 PROA641B 4/1 PROA646B 4/6 PROA650B 5/5 PROA653B 5/3 PROA691B 9/1 7" Stroke - Length: Collapsed 12.50"/Extended 19.50" PROA730B 3/3 PROA735B 3/5 PROA736B 3/6 PROA740B 4/4 PROA746B 4/6 PROA750B 5/5 PROA751B 5/1 PROA752B 5/2 PROA753B 5/3 PROA754B 5/4 PROA757B 5/7 PROA760B 6/6 PROA762B 6/2 PROA763B 6/3 PROA764B 6/4 PROA770B 7/7 PROA791B 9/1 8" Stroke - Length: Collapsed 13.50"/Extended 21.50" PROA838B 3/8 PROA839B 3/9 PROA8310B 3/10 PROA8311B 3/11 PROA846B 4/6 PROA847B 4/7 PROA848B 4/8 PROA849B 4/9 PROA8410B 4/10 PROA8411B 4/11 PROA850B 5/5 9" Stroke - Length: Collapsed 14.50"/Extended 23.50 PROA930B 3/3 PROA935B 3/5 PROA937B 3/7 PROA938B 3/8 PROA939B 3/9 PROA9310B 3/10 PROA9311B 3/11 PROA940B 4/4 PROA945B 4/5 PROA946B 4/6 PROA947B 4/7 PROA948B 4/8 PROA949B 4/9 PROA9410B 4/10 PROA9411B 4/11 PROA950B 5/5 PROA953B 5/3 PROA956B 5/6 PROA957B 5/7 PROA960B 6/6
PROA550B
PROA740B
Snap-on Shock Cover protects shock from rocks and mud.
154
2010
145-160OW10.indd 154
11/10/09 10:17:40 AM
Small Body Steel And Aluminum Shocks
Rubber Shock Bumper PROA100
Small Steel Body (SB), Small, Smooth Body Aluminum (SBA) and Small, Threaded Body Aluminum (ASB) Shocks have 1.63" diameters, lightweight gas cells and are offered in many different strokes and valvings. Note: “SB” Series Require Two B275 Bearing Ends To Be Ordered Separately. “ASB” Series Include Bearing Ends.
50/50 Valving Shocks SB
ASB
Aluminum bearing end with 1/2" I.D. hole for use on regular size 2" body coil-over shocks.
Bearing End PROWB200 Steel bearing end with 1/2" I.D. hole for use on regular size 2" body coil-over type shocks. This is the bearing end required for modifieds.
Bearing End PROB275 Aluminum bearing end with 1/2" I.D. hole for use on small body 1.63" diameter coil-over shocks. PROSB51
Coil-Over Snap Ring PROC379
Split Valving Shocks SBA
Bearing End PROB200
Damping Comp./Rebound
5" Stroke - Length: Collapsed 10.375"/Extended 15.375" PROSB51 – 1/1 PROSB52 – 2/2 PROSB53 PROASB53B 3/3 6" Stroke - Length: Collapsed 11.375"/Extended 17.375" PROSB62 PROASB62B 2/2 PROSB63 PROASB63B 3/3 PROSB64 PROASB64B 4/4 7" Stroke - Length: Collapsed 12.50"/Extended 19.50" – PROASB73B 3/3 – PROASB74B 4/4 – PROASB75B 5/5
SB
Fits under shock end for added security.
ASB
For small body steel shocks. Damping Comp./Rebound
5" Stroke - Length: Collapsed 10.375"/Extended 15.375" PROSB531 – PROASB531B 3/1 6" Stroke - Length: Collapsed 11.375"/Extended 17.375" PROSB624 – PROASB624B 2/4 PROSB631 – PROASB631B 3/1 7" Stroke - Length: Collapsed 12.500"/Extended 19.500" – – PROASB731B 3/1 – – PROASB735B 3/5 – PROSBA753B – 5/3
Large Diaper Pin PROC322 Shock Extensions For 2" Shocks For 2" body shocks. Part No.
Description
PROC510 ...........1" Shock Extension PROC520 ...........2" Shock Extension
“ASB” Rebound Adjustable Shocks Small, user friendly “ASB” threaded body aluminum Shocks may be adjusted by turning the rebound adjuster from 3 to 7 and have the same sophisticated acceleration ramps and blow-off curves as standard Pro Shocks. Available in 7" strokes only. Part No.
Description
PROASB531B
PROASB730-5B
Spanner Wrench PROZ902 Makes adjusting coil-over shocks much easier.
Bump/Rubber Spring Kit PROA200
PROASB730-5B ........ 3 Compression/0-5 Rebound PROASB733-7B ........ 3 Compression/3-7 Rebound PROASB740-5B ........ 4 Compression/0-5 Rebound PROASB743-7B ........ 4 Compression/3-7 Rebound
Coil-Over Kit PROC375 Aluminum coil-over kit for small body 1.63" diameter coil-over shocks. Includes threaded tube, adjusting nut, upper spring seat, snap ring and diaper pin.
Coil-Over Kit PROC330 Aluminum coil-over kit for “ASB” series, 1.63" dia. coil-over shocks and 1-7/8" diameter springs. Includes adjusting nut, upper spring seat and diaper pin. Ken Love
Photo: Skip Konkle
2010
145-160OW10.indd 155
155
11/10/09 10:17:52 AM
NEW VENDOR
Billet Steel Main Bearing Caps
Forged Piston Kits
Billet main caps offer increased bottom end strength. Many of the billet caps listed are for converting a two-bolt main block to a more durable four-bolt main.
Manufactured by Wiseco, ProTru Forged Pistons are affordable with features usually found only in more expensive pistons. Pistons are machined for 1/16" top, 1/16" second and 3/16" oil rings. Kits include eight pistons, Hastings hi-tensile plasma moly piston rings, chrome moly wrist pins, and a set of spiral locks.
Part No.
Description
Part No.
Small Block Chevy 265-350 PGESB350CFS4 ........ 350 Center Caps, OEM Replacement, 4-Bolt Caps/4-Bolt Blocks PGESB350CSA2 ........ 350 Splayed Center Caps, 4-Bolt Caps/2-Bolt Blocks PGESB350CSA4 ........ 350 Step Bottom Angle Caps For Small Journal 283-327 With Stock Register PGESB350CFA .......... 350 Flat Bottom Angle Caps For Blocks With 2-or 4-Bolt Register PGESB350C12F ........ 350 Flat Bottom Angle Caps For 2-Bolt Blocks When OE Dipstick/Oil Pan Is Required PGESB350F .............. 327-350 (Large Journal) Front Main Bearing Cap, 2-Bolt PGESB350RWS ......... 350 Rear Main Bearing Cap, 2-Pc. Rear Main Seal, Wet Sump App. PGESB350RWSL ....... 350 Late Rear Main Bearing Cap, 1-Pc. Rear Main Seal, Wet Sump App. PGESB350C12 .......... 350 Step Bottom Angle Caps For 2-Bolt Block When Stock Dipstick And Oil Pan Usage Is Required PGESB350RSDS ....... 283-350 (Large/Small Journal) Rear Main Cap Support Strap, Dry Sump App. PGESB350RSWS ....... 350 Rear Main Cap Support Strap, Wet Sump App. PGESBFS .................. 283-350 Front Main Cap Support Strap Small Block Chevy 400 PGESB400CFA .......... 400 Flat Bottom Angled Caps, 4-Bolt Caps/2-Bolt Blocks PGESB400CFS4 ........ 400 Stock Replacement 4-Bolt Center Caps PGESB400CSA .......... 400 Splayed Center Caps, 4-Bolt Caps/2-Bolt Blocks PGESB400F .............. 400 Front Main Bearing Cap, 2-Bolt PGESB400RSWS ....... 400 Rear Main Cap Support Strap, Wet Sump App. PGESBFS .................. 400 Front Main Cap Support Strap
Sondi Eden
Typical Dry Sump Plumbing
Bore
Stroke
Rod Length
Comp. Ht.
Comp. Ratio
SB Chevy Domed Piston Kits, Use With 23째 (OEM-Style) Cylinder Heads WPTPT001H3 4.030" 3.480" 5.700" 1.560" 11.5:1 WPTPT006H3 4.030" 3.480" 6.000" 1.260" 11.5:1 WPTPT018H3 4.155" 3.750" 6.000" 1.125" 12.9:1 WPTPT018H4 4.165" 3.750" 6.000" 1.125" 13.0:1 WPTPT026H3 4.030" 3.750" 5.700" 1.425" 12.4:1 WPTPT027H3 4.030" 3.750" 6.000" 1.125" 12.4:1 WPTPT027H4 4.040" 3.750" 6.000" 1.125" 12.4:1 WPTPT027H6 4.060" 3.750" 6.000" 1.125" 12.5:1 WPTPT029H3 4.155" 3.480" 6.000" 1.260" 12.1:1 Note: Compression ratios are based on SB Chevy: 67cc. chamber volume.
Photo: Jim DenHamer
Typical Fuel System Plumbing
Four-stage oil pump system shown. 1. Scavenge In -10, From Back Of Head 2. Scavenge In -12, From Oil Pan 3. Scavenge In -12, From Oil Pan 4. Pressure In -12, From Bottom Of Oil Tank 5. Pressure Out -10/-12, Oil Pressure To Engine 6. Scavenge Out -12, To Oil Tank 7. Scavenge Out -12, To Oil Tank 8. Oil Pressure Bypass 9. Drive Shaft 1/2" Hex, To Cam Spud 9
1
7
2
6
3
5
4
8
156
2010
145-160OW10.indd 156
11/10/09 10:18:17 AM
Aluminum Threaded Body Shocks 62 Series
Coil-Over Kits
The 62 Series shock bodies are made of 6061-T6 aluminum for strength and longevity. Use with QA1CK6201 coil-over kit.
Kits includes aluminum sleeve, spring cap, spring seat adjuster nut, wire ties, spring cap retainer pin, jam nut and snap rings. Part No.
QA1CK8201
Description
QA1CK6201 .............. 62, 67 And 68 Series Aluminum Shocks, 2-1/2" I.D. Springs QA1CK8201 .............. 82 Series Aluminum Shocks, 1-7/8" I.D. Springs Part No.
Valving Comp./Rebound
7" Stroke Shock Absorbers QA16273 3 QA16273-5 3-5 QA16274 4 QA16275 5 QA16275-3 5-3 QA16276 6 9" Stroke Shock Absorbers QA16293 3 QA16293-5 3-5 QA16294 4 QA16295 5 QA16295-3 5-3 QA16296 6
Comp. Length
Extended Length
13.00" 13.00" 13.00" 13.00" 13.00" 13.00"
20.00" 20.00" 20.00" 20.00" 20.00" 20.00"
15.00" 15.00" 15.00" 15.00" 15.00" 15.00"
24.00" 24.00" 24.00" 24.00" 24.00" 24.00"
Spanner Wrenches Make quick, easy coil-over adjustments. Part No.
Description
QA1T120W
QA1T114W ............... 2 Spanner Wrenches, FC, 21, 24, 50, 57, 60, 62, 64, 65, 67 And 68 Series Shocks QA1T120W ............... Spanner Wrench, 11, 14, 15, 55, 70, 75 And 79 Series Shocks
Aluminum Shock Extensions Place the spring seat on the eyering or on the extension itself. Part No.
Description
QA19029-163........... 1" Length, 9/16"-18 Threads QA19029-164........... 2" Length, 9/16"-18 Threads
Bearing Mount QA19036-110
Aluminum Smooth Body Shocks 60 Series
Kit includes aluminum bearing mount with bearing and snap rings for one 55 Series shock.
Fully revalvable and rebuildable shock absorbers have no valving overlap for consistent, fade-free performance. Twin tube shocks are constructed using 15mm centerless ground, hard chrome plated piston rods, precision machined pistons, 2" O.D. aluminum bodies and replaceable 1/2" I.D. Teflon/Kevlar injection molded bearings. May be inverted to reduce unsprung weight.
Rubber Compression Shock Bumper QA1BC01 Typically used with soft front, progressive spring set-ups, bumper is 1-1/2" O.D. x 3" long, and may be shortened.
Rebuild Kits Part No.
Valving Comp./Rebound
7" Stroke Shock Absorbers QA16074 4 QA16075 5 9" Stroke Shock Absorbers QA16094 4 QA16095 5
Comp. Length
Extended Length
13.00" 13.00"
20.00" 20.00"
15.00" 15.00"
24.00" 24.00"
Aluminum Threaded Small Body Shocks 82 Series Lightweight aluminum body, 82 series shocks are up to 40% lighter than full size shocks. Deflective disc valving offers increased sensitivity in response, control and consistency. Shocks are fully rebuildable, revalvable and repairable.
Everything needed to properly rebuild QA1 shock absorber including P.T.F.E. carbon fiber band, piston rod seal, O-rings and travel indicator ring. Part No.
Description
QA1RK01 ...........60 And 62 Series Shocks QA1RK02 ...........FC And 50 Series Shocks
Tool Kit QA17891-106 Greatly aids rebuilding FC, 50, 60 and 62 Series shock absorbers. Includes a base valve removal tool, gland removal tool and a closure nut wrench.
Tuning Kits Part No.
Valving Comp./Rebound
Comp. Length
5" Stroke Shock Absorbers QA18253 3 10.38" 6" Stroke Shock Absorbers QA18262 2 11.38" QA18262-4 2-4 11.38" QA18263 3 11.38" 7" Stroke Shock Absorbers QA18273 3 12.38" QA18274 4 12.38" QA18275 5 12.38" Notes: Shocks Are Also Available In 8" And 9" Strokes.
Extended Length
15.75" 17.75" 17.75" 17.75" 19.75" 19.75" 19.75"
Need custom valving? Tuning kits will re-valve any QA1 circle track shock. Part No.
Description
QA1TKO1 ...........Large Body Tuning Kit (Range 0-13) QA1TKO2 ...........Small Body Tuning Kit (Range 1-8)
Shock Oil QA1SF01 Specially formulated for use with QA1 or Carrera shock absorbers. Sold in one qt. bottles.
2010
145-160OW10.indd 157
157
11/10/09 10:18:27 AM
2-1/2" I.D. Coil-Over Springs All QA1 springs are manufactured from quality, cold wound chrome silicone steel which has undergone thorough heat treating and shot peening. Springs, in chrome or silver powder coated, are ground square at both ends for straightness, and are clearly marked with the free length and spring rate. 10" Tall
12" Tall
Rate
Chrome
Silver
Chrome
Silver
95 100 110 125 130 150 165 170 175 185 200 225 250 275 300 325 350 375 400
– – – – – QA110CS150 QA110CS165 – QA110CS175 QA110CS185 QA110CS200 QA110CS225 QA110CS250 QA110CS275 QA110CS300 QA110CS325 QA110CS350 QA110CS375 QA110CS400
– QA110-100 – QA110-125 – QA110-150 – – QA110-175 – QA110-200 QA110-225 QA110-250 – QA110-300 – QA110-350 – QA110-400
– – – – – QA112CS150 – – QA112CS175 – QA112CS200 QA112CS225 QA112CS250 QA112CS275 QA112CS300 QA112CS325 QA112CS350 QA112CS375 QA112CS400
QA112-095 – QA112-110 – QA112-130 QA112-150 – QA112-170 – – QA112-200 – QA112-250 – QA112-300 QA112-325 QA112-350 QA112-375 –
“AM” Series Aluminum Rod Ends
“PCM” Series Chrome Moly Steel Rod Ends
Aluminum rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used.
The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, precision ground, heat treated and hard chrome plated.
RH
Red Male Part No. LH
QA1AMR-7 QA1AMR-8 QA1AMR-8-10
RH
QA1AML-7 QA1AML-8 QA1AML-8-10
Black Male Part No. LH
QA1AMR-8-10BK QA1AML-8-10BK
Bore x Thread Size Reference
Utl. Static Radial Load
7/16" X 7/16" 1/2" X 1/2" 1/2" X 5/8"
4,800 7,700 15,000
Bore x Thread Size Reference
Utl. Static Radial Load
1/2" X 5/8"
15,000
RH
158
LH
Bore x Thread Size Reference
QA1PCMR8-10 QA1PCML8-10 1/2" x 5/8"-18
Utl. Static Radial Load
19,300
“XM” Series Chrome Moly Steel Rod Ends
QA1AMR-8-10BK
Troy Underwood
Male Part No.
QA1AMR-8-10
Photo: Jim DenHamer
Two-piece rod ends feature balls and bodies which have been fully heat treated. “XM” Series rod ends also feature an increased crosssectional area for greater tensile strength. RH
Male Part No. LH
Bore x Thread Size Reference
Utl. Static Radial Load
QA1XMR-6 QA1XMR-8 QA1XMR8-10
QA1XML-6 QA1XML-8 QA1XML8-10
3/8" x 3/8"-24 1/2" x 1/2"-20 1/2" x 5/8"-18
9,544 16,238 23,542
Kyle Robbins
Photo: Jim DenHamer
2010
145-160OW10.indd 158
11/10/09 10:18:50 AM
Mark II 10-Spline “Ultra Duty” Quick Change Pro Gears Quarter Master uses the highest quality E9310 steel in the manufacture of their Pro Gears and finishes them with a proprietary heat treat process for maximum strength. All gear sets are lightened except 5,15 and 25.
Part No.
Set No.
Number Of Teeth
Spur Ratio
4.11 R&P Lo
4.11 R&P Hi
4.56 R&P Lo
4.56 R&P Hi
4.86 R&P Lo
4.86 R&P Hi
QTR911000 QTR911029 QTR911037 QTR911045 QTR911053 QTR911074 QTR911091 QTR911105 QTR911115 QTR911130 QTR911143 QTR911160 QTR911174 QTR911182 QTR911190 QTR911200 QTR911211 QTR911227 QTR911238 QTR911250 QTR911261 QTR911273 QTR911278 QTR911286 QTR911292 QTR911304 QTR911318 QTR911333 QTR911350 QTR911364 QTR911381 QTR911391 QTR911400 QTR911409 QTR911421 QTR911435 QTR911450 QTR911471 QTR911476 QTR911500 QTR911524 QTR911533 QTR911550 QTR911563 QTR911579 QTR911591 QTR911600 QTR911625 QTR911632 QTR911667 QTR911700 QTR911714 QTR911765 QTR911800
1 1Q 2 5 15 26 6 25 12 7 7Q 17 8Q 8 19 9Q 9 11 3 13 18 18Q 4Q 20Q 4 20 22 16 10 34 34Q 14 14Q 35 32 32Q 24 36 37 23 21 21Q 27 43 28 28Q 29 30 40 31 33 31A 51Q 54Q
27/27 35/36 27/28 22/23 19/20 27/29 22/24 19/21 26/29 23/26 21/24 25/29 23/27 22/26 21/25 25/30 19/23 22/27 21/26 24/30 23/29 22/28 18/23 21/27 24/31 23/30 22/29 18/24 20/27 22/30 21/29 23/32 20/28 22/31 19/27 23/33 20/29 17/25 21/31 22/33 21/32 15/23 20/31 16/25 19/30 22/35 20/32 16/26 19/31 18/30 20/34 14/24 17/30 15/27
1.000 1.029 1.037 1.045 1.053 1.074 1.091 1.105 1.115 1.130 1.143 1.160 1.174 1.182 1.190 1.200 1.211 1.227 1.238 1.250 1.261 1.273 1.278 1.286 1.292 1.304 1.318 1.333 1.350 1.364 1.381 1.391 1.400 1.409 1.421 1.435 1.450 1.471 1.476 1.500 1.524 1.533 1.550 1.563 1.579 1.591 1.600 1.625 1.632 1.667 1.700 1.714 1.765 1.800
4.11 4.23 4.26 4.30 4.33 4.42 4.48 4.54 4.59 4.65 4.70 4.77 4.83 4.86 4.89 4.93 4.98 5.05 5.09 5.14 5.18 5.23 5.25 5.29 5.31 5.36 5.42 5.48 5.55 5.61 5.68 5.72 5.76 5.79 5.84 5.90 5.96 6.05 6.07 6.17 6.26 6.30 6.37 6.42 6.49 6.54 6.58 6.58 6.71 6.85 6.99 7.05 7.25 7.40
4.11 4.00 3.96 3.93 3.91 3.83 3.77 3.72 3.69 3.64 3.60 3.54 3.50 3.48 3.45 3.43 3.40 3.35 3.32 3.29 3.26 3.23 3.22 3.20 3.18 3.15 3.12 3.08 3.05 3.01 2.98 2.95 2.94 2.92 2.89 2.87 2.84 2.80 2.78 2.74 2.70 2.68 2.65 2.63 2.60 2.58 2.57 2.53 2.52 2.47 2.42 2.40 2.33 2.28
4.56 4.72 4.76 4.80 4.89 4.97 5.04 5.08 5.15 5.21 5.28 5.35 5.38 5.42 5.47 5.51 5.59 5.64 5.69 5.74 5.80 5.82 5.86 5.88 5.94 6.00 6.07 6.15 6.21 6.29 6.34 6.38 6.42 6.47 6.54 6.61 6.70 6.72 6.83 6.94 6.99 7.06 7.12 7.19 7.25 7.29 7.69 7.43 7.59 7.74 7.81 8.04 8.20
4.56 4.39 4.36 4.33 4.24 4.18 4.12 4.08 4.03 3.99 3.93 3.88 3.85 3.83 3.80 3.76 3.71 3.68 3.64 3.61 3.58 3.57 3.54 3.53 3.49 3.46 3.42 3.37 3.34 3.30 3.27 3.25 3.23 3.21 3.18 3.14 3.10 3.09 3.04 2.99 2.97 2.94 2.92 2.89 2.86 2.85 2.70 2.79 2.73 2.68 2.66 2.58 2.53
4.86 5.00 5.04 5.08 5.11 5.22 5.30 5.37 5.42 5.49 5.55 5.63 5.70 5.74 5.78 5.83 5.88 5.96 6.01 6.07 6.12 6.18 6.21 6.24 6.27 6.34 6.40 6.48 6.56 6.62 6.71 6.76 6.80 6.84 6.90 6.97 7.04 7.14 7.17 7.29 7.40 7.45 7.53 7.59 7.67 7.73 7.77 7.90 7.92 8.10 8.26 8.33 8.57 8.74
4.86 4.72 4.68 4.65 4.61 4.52 4.45 4.39 4.45 4.30 4.25 4.19 4.14 4.11 4.08 4.05 4.01 3.96 3.92 3.89 3.85 3.82 3.80 3.78 3.76 3.72 3.68 3.64 3.60 3.56 3.52 3.49 3.47 3.45 3.42 3.39 3.35 3.30 3.29 3.24 3.19 3.17 3.13 3.11 3.08 3.05 3.04 2.99 2.98 2.91 2.86 2.83 2.75 2.70
Gear Tote Box ALL14164 Organize gear sets and keep them clean in this plastic gear tote box.
Quick-Change Drain Pan ALL14166 Aluminum Drain Pan has built-in perforated shelf to hold gears and allow lube to drain into pan. 10-1/4" wide, 12" long and 3-3/4" deep.
Quick Change Oil Plug Sockets
Six-point sockets fit on a 1/2" drive ratchet to remove or install plugs on quick ALL11161 change rear ends. Small socket fits plugs in most center sections and side bells. Large socket fits plug in Winters Ford 9" housings. Not recommended for high torque applications. Part No.
Description
ALL11160 ..........Small, 1-3/8", Blue Anodized ALL11161 ..........Large, 1-7/8", Red Anodized
Quick Change Oil Plug Wrenches Double-ended, blue anodized aluminum quick change oil plug wrenches are handy for checking fill plugs on center sections and inspection plugs on side bells. Two variations for Winters quick changes. Part No.
Description
ALL11140 ..........1-3/8" And 1-7/8" ALL11141 ..........1" And 1-3/8"
2010
145-160OW10.indd 159
ALL11160
159
11/10/09 10:19:12 AM
RACING PRODUCTS
Individual Gauges
QRP611-6000
QRP611-6003
Ignition Panels
QRP611-6006
QRP611-6009
Affordable, illuminated gauges have white dial faces with bright red pointers. Part No.
Description
QRP611-6000....Fuel Pressure, 0-15 PSI QRP611-6003....Oil Pressure, 0-100 PSI QRP611-6006....Water Temperature, 140°-280° F. QRP611-6009....Oil Temperature, 140°-280° F.
QRP50-102
QRP50-102 Includes ignition switch and starter button. Measures 3-3/8" W. x 3-5/8" H.
Auto Meter Sport-Comp Gauge Panel QRP61-0101
QRP50-052
QRP50-052 Includes ignition switch, starter button and pilot light. Measures 3-3/8" W. x 4-1/4" H.
Ready to install Auto Meter gauge panels are completely pre-wired and ready to install. Attractive panel is offered with Auto Meter Sport-Comp gauges and includes warning lights, senders, oil pressure gauge and water temperature gauge.
QRP50-022 Includes ignition switch, starter button, two pilot lights and accessory switch. Measures 4-5/8" W. x 4-3/8" H. QRP50-022
Warning Lights Replacement, 3/4" dia. Pilot Lights fit all QuickCar gauge panels. Part No.
QuickCar Panel’s high current, specially wound copper wiring provides superior performance. High temperature (105°C) insulation is impervious to acids, oils and fuels. Extra thick (.040") connectors are professionally crimped and soldered for superior tensile strength (15,000 PSI) and all connections are insulated with shrink tubing instead of hard plastic insulators. All connectors are plated with pure 24K gold for improved current transfer and resistance to oxidation. Ignition panels are prewired to a plug that mates with wiring harness QRP50-200 (sold separately) to complete the system.
Description
QRP61-701........Red QRP61-702........Blue QRP61-704........Yellow QRP61-709........Green
Ignition Panel With Flip Switch Cover QRP50-053 Ignition panel has aircraft type flip switch cover to prevent accidental engagement.
QuickTach LCD Recall Tachometer QRP611-099
Replacement Parts
QuickTach automatically displays the highest RPM attained from the last race for 15 minutes after shut down. Digital LCD unit is enclosed in a waterproof aluminum case and has an easily read, 3/4" x 2-3/4" back lighted display. Powered by a 9-volt battery. Tach includes mounting brackets.
Part No.
For QuickCar Ignition Control Panels. Description
QRP50-410........Micro Single Pole Switch QRP50-500........Standard Single Pole Switch QRP50-505........Bridged Double Pole Switch QRP50-510........Push-To-Start Momentary QRP50-512........Momentary Toggle Switch QRP50-601........Warning Light-Red QRP50-609........Warning Light-Green QRP50-610........Boot For Toggle Switch
Mini Brake Bias Gauge Panels Panel has light, 1-1/2" diameter gauges with bleeders to evacuate air pockets and establish a reference point for pressure ratios. Panels are 2-3/4" wide x 4-1/2" high. Part No.
Description
QRP61-101........Vertical Mount Brake Bias Gauge Panel QRP61-103........Horizontal Mount Brake Bias Gauge Panel
Ryan Grubaugh
160
Photo: Doug Swift
2010
145-160OW10.indd 160
11/10/09 10:19:26 AM
RACING PRODUCTS
QuickScale QRP56-181
Dual Timing Systems
QuickScale incorporates many features common to much more expensive scales. Affordable, yet high quality scales feature two full screen displays; one for all four wheel weights and a second screen for all weights and percentages with different modes to select. Scales are accurate within 0.1 of 1%. Sold with 15" CNC-machined billet aluminum pads, color-coded cables, related hardware and instructions. Covered by a full two year warranty.
Systems include attractive, easy to hold acrylic clipboard (choose red, yellow, black, or red/white/blue), two Robic 505 stopwatches, five qualifying sheets and five 50-lap chart sheets. Additional lap chart and chassis setup sheets are available.
Tire Pressure Gauges Rugged 2-1/2" dia. tire pressure gauges with pressure relief valves use the entire gauge range for more accurate readings. Features include shock resistant boots, 14" hoses and a strain relief on each end. Recommended: Dirt 20 PSI, Asphalt 40 PSI, Road Racing 60 PSI. Part No.
Description
Dry Gauges QRP56-020........20 PSI .5 lb. Increments. QRP56-040........40 PSI 1 lb. Increments. Liquid Filled Gauges QRP56-021........20 PSI .5 lb. Increments. QRP56-041........40 PSI 1 lb. Increments. QRP56-061........60 PSI 1 lb. Increments. Glow-In-The-Dark Gauges QRP56-022........20 PSI .5 lb. Increments. QRP56-042........40 PSI 1 lb. Increments. QRP56-062........60 PSI 1 lb. Increments.
Economy Tire Pressure Gauges Easy-to-read 2" diameter gauges feature shock rings, 12" long flexible hoses and 45° swivel chucks. Part No.
Description
QRP56-007........Tire Pressure Gauge, 0-40 PSI QRP56-008........Tire Pressure Gauge, 0-60 PSI
Tire Tape QRP56-110 QuickCar’s unique hawk tip design securely grabs onto any surface and won’t pull loose. Measures up to 10 feet.
Deluxe Tire Durometer QRP56-155 Checks hardness of tire to determine condition. Includes carrying pouch.
110 Volt Male Recessed Outlet QRP57-710
Part No.
Description
QRP51-051........Dual Timing System, Red Clipboard QRP51-052........Dual Timing System, Black Clipboard QRP51-053........Dual Timing System, Yellow Clipboard QRP51-054........Dual Timing System, Red/White/Blue Clipboard QRP51-201........Chassis Set-Up Pad, 50 Sheets QRP51-210........Pre-Race Chassis Set-Up Pad, 50 Sheets QRP51-215........Post-Race Chassis Set-Up Pad, 50 Sheets QRP51-230........50-Lap Chart Pad, 50 Sheets
Dual Aluminum Timing System QRP51-070 Aluminum timing system includes two Robic SC505 watches, five qualifying sheets and five lap charts.
Steering Wheel Kill Switch QRP50-190 Mandated by NASCAR. Mount the heavy duty push button switch on steering wheel for easy access if brakes fail or throttle sticks. Includes coil cord and GM Weatherpack connector.
“Smart” Level Tray QRP56-167 Provides perfect alignment of digital level when measuring angle of trailing arms, suspension links or other tubular components.
Smart Tool ALL10113 The SMARTTOOL digital level can be used to ensure that chassis tubing is level and plumb. Helpful when building roll cages or checking driveshaft angles. Perfect for use with Smart Level Tray QRP56-167 (above).
Use as a remote plug for oil tank heater.
2010
161-176OW10.indd 161
161
11/10/09 10:22:58 AM
RCB2DPK
Tubular Bolts Engineered for the weight conscious racer, lightweight tubular bolts are made from 4130 chrome moly, are heat treated with rolled threads and have ground outside diameters. Bolt heads are threaded and welded. All are zinc plated for durability. Individual Tubular Bolts Length
3/8"-16
3/8"-24
7/16"-14
Fastener Size 7/16"-20 1/2"-20
5/8"-18
RCB14HSK
Tubular Bolt Kits
3/4"-16
5/8" – – RCB431406 – – – – 1" – RCB372410 – – – – – 1-1/4" RCB371612 RCB372412 – – – – – 1-5/16" – – – – RCB502013 – – 1-3/8" – – RCB431413 – – – – 1-1/2" – RCB372415 – RCB432015 RCB502015 1-3/4" – – – – RCB502017 RCB621817 – 2" – – – RCB432020 RCB502020 RCB621820 RCB751620 2-1/4" – RCB372422 – – RCB502022 RCB621822 – 2-1/2" – RCB372425 – RCB432025 RCB502025 RCB621825 RCB751625 2-3/4" – – – – RCB502027 RCB621827 – 3" – – – – RCB502030 RCB621830 RCB751630 3-1/2" – – – – RCB502035 RCB621835 RCB751635 4" – RCB372440 – – RCB502040 RCB621840 RCB751640 4-1/2" – – – – RCB502045 RCB621845 RCB751645 5" – – – – – – RCB751650 5-1/4" – – – RCB432055 – – – 6" – – – RCB432060 RCB502060 – RCB751660 7" – – – RCB432070 – – – 8-1/2" – – – RCB432085 – – –
Part No.
Description
RCB10QCCK ......Quick Change Rear End Cover Bolt Kit, (10) 3/8"-16 x 1-3/4" Studs RCB10RETBK .....Rear End Thru Bolt Kit, (5) 7/16" x 5-1/2" Bolts, (5) 7/16" x 6" Bolts, (20) AN Washers, (10) 7/16" Thin Loc Nuts RCB14HSK.........Header Stud Kit, (14) 3/8"-16-24 x 1-3/8" Studs RCB16RLBK .......Aluminum Rim Lock Bolt Kit, (16) 5/16"-18 x 1-1/4" Bolts, (16) 5/16" AN Washers RCB2DPK ..........5/8" Dowel Pin Kit (2 Pcs.) RCB4W5DCK .....Wide 5 Dust Cover Bolt Kit, (4) 7/16" x 1-3/8" Bolts, (4) 7/16" AN Washers RCB8W5DFK ......Wide 5 Drive Flange Bolt Kit, (8) 7/16" x 1-3/8" Bolts, (8) 7/16" AN Washers RCB9RETBK .......Rear End Thru Bolt Kit, (9) 7/16" x 5-1/4" Bolts, (18) AN Washers, (9) 7/16" Thin Loc Nuts
Aluminum Bolts Sold individually. Part No.
Description
RCB252005A ............ 1/4"-20 x 1/2" RCB252010A ............ 1/4"-20 x 1" RCB311812A ............ 5/16"-18 x 1-1/4"
Stainless Steel AN Washers 25 per pack. Part No.
Size
RCB250AN.........1/4" RCB310AN.........5/16" RCB370AN.........3/8" RCB430AN.........7/16" RCB500AN.........1/2" RCB620AN.........5/8" RCB750AN.........3/4"
Elite Driver Kit RCVLP1600 Required by many tracks and racing series as a driver listening-only radio for caution announcements. The Elite driver kit includes a RACEceiver 1600 (Yellow) and Ear Bud set. The economical RACEceiver combines small size, great reception and a capability to handle frequencies between 450-470 mhz. Ear Bud set has an extra soft earpiece that conforms to the ear canal, standard 3.5 plug and strong, internal braided wire for use with a helmet. Replacement Component Part No.
Description
RCVLOE .............Ear Bud Set
Sprint Car Covers Comes in a black nylon duffle bag. 200 Denier Polyester with cotton liner. Heavy duty zipper in the rear secures cover to the car, tires, and nerfbars to prevent tears. Part No.
Description
RCA81006 ................ Wing Spring Car Cover RCA82006N .............. Non Wing Spring Car Cover
162
RCA81006
2010
161-176OW10.indd 162
11/10/09 10:23:15 AM
Ridgeline SA-2005 Full Face Helmet
Safe-Quip U-Shaped Helmet Supports
Top quality, hand-laid composite helmet has an EPS liner, Comfort Fit FR interior, Kevlar chin strap, aluminum positive lock pivot and polycarbonate face shield. Helmet meets Snell SA-2005 specifications and offers a wide range of vision. Allows use of personal eyewear. White only.
High density, flame retardant foam supports have woven FRC covers and Velcro closures. Meets SFI 3.3 specifications.
Part No.
Description
Black
Red
Blue
U-Shaped Helmet Support
RQP331001
RQP331011
RQP331021
Safe-Quip 355 Gloves
Description
RQP282112 .............. Small RQP282113 .............. Medium RQP282115 .............. Large RQP282116 .............. X-Large RQP282117 .............. XX-Large
Double-layer, Nomex knit gloves deliver comfort and safety. Gloves feature a high grip black suede leather reinforced palm. The hook and loop adjuster strap ensures a proper fit. Meets SFI 3.3/5 specifications.
Helmet Sizing Chart Helmet Size
Inches
Centimeters
Hat Size
2X-Small X-Small Small Medium Large X-Large 2X-Large
20 to 20-1/2 20-3/4 to 21-1/4 21-1/2 to 22-1/8 22-3/8 to 22-7/8 23-1/8 to 23-3/4 24 to 24-1/2 24-3/4 to 25-1/4
51 to 52 53 to 54 55 to 56 57 to 58 59 to 60 61 to 62 63 to 64
6-3/8 to 6-1/2 6-5/8 to 6-3/4 6-7/8 to 7 7-1/8 to 7-1/4 7-3/8 to 7-1/2 7-3/4 to 7-5/8 7-7/8 to 8
Size
Black
Red
Blue
Small Medium Large X-Large XX-Large
RQP355002 RQP355003 RQP355005 RQP355006 RQP355007
RQP355012 RQP355013 RQP355015 RQP355016 –
RQP355022 RQP355023 RQP355025 RQP355026 RQP355027
Safe-Quip 350 Gloves Single-layer, non-SFI certified gloves have Nomex knit backs and white leather palms.
Heavy Duty Helmet Bag RQP300003 Oversize helmet bag protects helmet and helps keep face shield free from scratches. Bag has a soft fleece interior, black nylon exterior and webbed nylon handles for eased carrying.
Size
Black
Red
Blue
Small Medium Large X-Large
RQP350002 RQP350003 RQP350005 RQP350006
RQP350012 RQP350013 RQP350015 RQP350016
RQP350022 RQP350023 RQP350025 RQP350026
Racequip Euro Ankletop Racing Shoes Lightweight, flexible shoes have an advanced, European design with suede leather uppers and Pyrovatex flame retardant liners. Carbon-L wear pads provide added durability and toe protection. Ankletop shoes also feature contrasting stitching, padded ankles, double-stitched seams and reinforced lace areas. Shoes meet SFI 3.3/5 specifications.
Ridgeline Shield Hardware Kit RQP202111 Shield hardware kit includes aluminum pivot screws and washers, visor washers and visor ratchet for Ridgeline full face helmet.
Replacement Helmet Shields
Model
Clear
Light Smoke
Dark Smoke
Part No.
Size
RQP30500070 .......... 7 RQP30500075 .......... 7-1/2 RQP30500080 .......... 8 RQP30500085 .......... 8-1/2 RQP30500090 .......... 9 RQP30500095 .......... 9-1/2 RQP30500100 .......... 10
Amber
Blue
Mirror Smoke
Ridgeline RQP202001 RQP202003 RQP202004 RQP202006 RQP202007 RQP202009
Safe-Quip 360° Helmet Supports Full round, 360° helmet support is made from flame retardant, high density foam and covered with woven FRC. Support is 2" thick, and includes a tapered wedge design. Meets SFI 3.3 specifications. Description
Black
Red
Blue
RQP337007
RQP337017
RQP337027
Mid-top racing shoes offer a suede leather outer layer and a flame retardant, Pyrovatex liner with padded ankles. Durable, comfortable shoes include reinforced lace areas, double-stitched seams and molded rubber soles. Meet SFI 3.3/5 specifications. Size
RQP30300070 .......... 7 RQP30300080 .......... 8 RQP30300085 .......... 8-1/2 RQP30300090 .......... 9 RQP30300095 .......... 9-1/2 RQP30300100 .......... 10
Part No.
Size
RQP30300105 .......... 10-1/2 RQP30300110 .......... 11 RQP30300115 .......... 11-1/2 RQP30300120 .......... 12 RQP30300130 .......... 13
2010
161-176OW10.indd 163
Size
RQP30500105 .......... 10-1/2 RQP30500110 .......... 11 RQP30500115 .......... 11-1/2 RQP30500120 .......... 12 RQP30500125 .......... 12-1/2 RQP30500130 .......... 13 RQP30500140 .......... 14
Safe-Quip 303 Mid-Top Racing Shoes
Part No.
360° Helmet Support
Part No.
163
11/10/09 10:23:27 AM
Racequip Patriot-5 Multi-Layer Racing Suit Multi-layer, all Nomex racing suits are made in the U.S.A. and feature straight epaulets, boot cuffs, belt with Velcro closure, contrasting piping, vertical quilting and internal bag pockets. Nomex IIIA outer layer and lightweight Therm-X liner offer exceptional comfort and fire protection. Offered in onepiece version only, suits have black arms and red or blue torso and meet SFI 3.2A/5 specifications. Size
Red
Blue
Large RQP155015 X-Large RQP155016 XX-Large RQP155017
Harness assembly is made with premium 3" wide nylon webbing and is fitted with drop-forged steel hardware. Assembly includes two individual shoulder belts, pull down lap belt and 2" wide submarine belt. Double adjustable harness utilizes wrap-around or bolt-in mounting. Meets SFI 16.1 specifications. Description
Black
Red
Blue
Latch And Link Harness
RQP711001
RQP711011
RQP711021
Safe-Quip Harness Pads
RQP155025 RQP155026 RQP155027
Designed to add comfort when using 3" wide belts, harness pads are made from flame retardant foam padding that includes a Pyrovatex FRC cover with hook and loop closure. Sold in pairs.
Safe-Quip 120 Series Multi-Layer Racing Suits Pyrovatex outer liner and combination Nomex and FRC inner liner offer exceptional fire protection, and maintain superior comfort. Suits feature black epaulets, wrist and ankle cuffs, two-piece belt, high back collar, boot cuff pants, and contrasting arm and leg stripes. Suits meet stringent SFI 3.2A/5 specifications. Size
Safe-Quip 5-Point Latch And Link Harness Assembly
Description
Black
Red
Blue
Harness Pads
RQP767001
RQP767011
RQP767021
Safe-Quip Arm Restraints Designed for open cockpit race cars, arm restraints are manufactured from premium polypropylene webbing and high grade steel hardware. Adjustable from 7"-15". Sold in pairs.
Black
One-Piece Driving Suits Small RQP120002 Medium RQP120003 Large RQP120005 X-Large RQP120006 XX-Large RQP120007 XXX-Large RQP120008
Red
Blue
RQP120012 RQP120013 RQP120015 RQP120016 RQP120017 RQP120018
RQP120022 RQP120023 RQP120025 RQP120026 RQP120027 RQP120028
Description
Black
Red
Blue
Arm Restraints
RQP391002
RQP391012
RQP391022
Safe-Quip Helmet Restraint RQP322002 Restraint includes a D-ring to attach to helmet and an adjustable strap for the driver's arm. Offered in black only.
Suit Sizing Chart Small
Medium
Medium Tall
Large Height 5'6" - 5'8" 5'8" - 5'10" 5'10" - 6" 5'10" - 6" Weight 125 -140 140-165 150-175 165-195 Waist 30-32" 34-36" 34-36" 36-38" Chest 34-36" 38-40" 38-40" 42-44" Inseam 28" 29" 30" 31" Shoulders 17" 18" 18" 19" Sleeve 31-32" 33-34" 33-34" 34-35" Neck 14" 14.5" 14.5" 15.16"
X-Large 2X-Large 3X-Large
6' - 6'2" 6'2" - 6'4" 6'4" - 6'6" 200-225 225-250 â&#x20AC;&#x201C; 40-42" 44-46" 48-52" 46-48" 50-52" 54-56" 32" 33" 33" 20" 21" 23" 36" 37" 38" 16" 17-18" 18" Waist: At natural waist at navel (not hips where your jeans ride) Chest: Circumference at the widest part Inseam: Crotch seam to ankle bone Shoulder to Shoulder: Shirt shoulder seam to shirt shoulder seam Sleeve: Back base of neck to wrist elbow bent
Byron Reed
164
Photo: Jim DenHamer
2010
161-176OW10.indd 164
11/10/09 10:23:44 AM
Solo-2 Miniature UHF Receiver RCERESOLO2 NEW!
Motorola Piranha Race Communications System RCERE200
Employed by drivers at many tracks and racing series as a listening device for important track announcements. Micro receiver is only 2.5" x 1.7" x .75" in size, small enough to be put into a pocket or in the included clear plastic holder with belt clip. Unit, which includes 1,600 UHF frequencies, also features a 2-way radio interface module.
Top-of-the-line system for crew chief and driver is for 3/4 mile and larger tracks. For The Car: • Motorola CP200 Radio • RE703 Legacy PTT Switch • RE4302 Legacy Wiring Harness • RT511-U Roof Mount Antenna • Antenna Adapter • RB-3 Radio Mounting Kit For The Crew Chief: • Motorola CP200 Radio • RE005 Legacy Headset • RE3736 Radio Interface Cable • Radio Carry Case • RaceBELT • 90 Minute Charger For The Driver: • RE705 Legacy Flex Boom Helmet Kit • RE1 Foam Earmolds • V93 Equipment Case
Motorola Stingray Race Communications System RCERE840 Two-man system for the crew chief and driver works up to 3/4 mile. For The Car: • Motorola BPR40 Radio • RE503 Legacy PTT Switch • RE4302 Legacy Wiring Harness • RB-3 Radio Mounting Kit For The Crew Chief: • Motorola BPR40 Radio • RE005 Legacy Headset • RE3736 Radio Interface Cable • RaceBELT • 90 Minute Charger For The Driver: • RE705 Legacy Flex Boom Helmet Kit • RE1 Foam Earmolds • UTOTE Equipment Bag
Motorola Stingray Additional Crew Race Communications System RCERE841
Motorola Piranha Additional Crew Race Communications System RCERE201 Accommodate another crew member on the Piranha system. For The Crew: • Motorola CP200 Radio • RE005 Legacy Headset • RE3736 Radio Interface Cable • Radio Carry Case • RaceBELT
Accommodate another crew member on the Stingray system. For The Crew: • Motorola BPR40 Radio • RE005 Legacy Headset • RE3736 Radio Interface Cable • RaceBELT
RCERE503 RCERE4302
RCERE703
Race Communications System Accessories And Replacement Components Part No.
Description
RCE10370 ................ Headset Strap, Replacement For Behind-The-Head Headset RCE22658 ................ Cloth Ear Covers, Fits Over Foam or Gel-Filled Earseals RCEDCMC1 ............... Mic (Microphone) Muff, Large RCEDCMC2 ............... Mic (Microphone) Muff, Small RCEHH1 .................... Headset Holder, Secures Headset With Belt Clip When Not In Use RCENNTN4851 ......... Replacement Battery, 1800 MAH 7.5V, CP150/CP200 RCERBELT-PRO ......... RaceBELT, Nylon Belt With Buckle Secures Radio, Headset And Accessories RCERE1 .................... Earmolds, Foam Race Molded With Case RCERE2 .................... Semi Custom Earmolds, Shaped To Fit Into Ear Canal RCERE4302 .............. Legacy Car Harness, CP150/CP200 RCERE503 ................ Legacy Push-To-Talk Switch, Velcro Mount RCERE511U .............. Car Antenna, Roof Mount, Economy Model RCERE703 ................ Platinum Push-To-Talk Switch, Velcro Mount RCERT006 ................ Platinum Racer Headset, Most Popular Headset, Requires Radio Interface Cable RCERT705 ................ Standard Flex Boom Helmet Kit RCERT3736 .............. Motorola Twin Pin Headset Cable, CP150/CP200 RCERT3800 .............. Inline Push-To-Talk Switch RCEV93 .................... Metal Carrying Case, 18" x 13" x 7", Stores Radio Equipment RCEWPLN4138 ......... 90 Minute Rapid Charger, CP150/CP200 Tim Cox
Photo: Jim DenHamer
2010
161-176OW10.indd 165
165
11/10/09 10:24:00 AM
X Stacks Tear-Offs Revolutionary tear-offs are actually seven tearoffs laminated together for installation as one piece for high visibility, low reflection, and elimination of fog between layers. Use up to three stacks (30 tearoffs) at a time! SpeedStack™ Tear-Offs are sold in sleeves which contain five clear laminated stacks (40 tear-offs). The SmokeStack™ consists of three gray (smoke) layers and four clear layers for daytime or late afternoon sessions. The AmberStack™ consists of one amber layer (yellow) and six clear layers for glare reduction under track lighting. SmokeStack™ and AmberStack™ Tear-Offs are sold in sleeves which contain four laminated stacks (40 tear-offs). Application
Post Center
Shape
SpeedStack Part No.
SmokeStack Part No.
AmberStack Part No.
Simpson Voyager, HJC, Side Pro Elite Bell, G-Force, Pyrotect Simpson Matrix, SX, Jr. Shark, HJC Auto Simpson RX, Super Bandit, Diamondback, Raider, Shark, Super Shark, Vudo, Invader, Valor, Devil Ray Impact Air Draft, Super Sport, Spider, Stingray, Wizard, Euro Sport Bieffe, All Models Impact Vapor, Air Vapor, Charger, Super Charger, Draft Impact Champ, Nitro, Super Cyclone
11-1/2" 12-3/8" 11-1/2"
Straight Banana Banana
ROP10201C ROP10202C ROP10203C
ROP7201S ROP7202S ROP7203S
ROP7201A ROP7202A ROP7203A
11-1/2"
Nose Notch
ROP10204C
ROP7204S
ROP7204A
12-3/4" 10-1/4" 11-3/4" 11-1/2"
Banana Straight Banana Nose Notch
ROP10209C ROP7215C ROP10230C ROP10231C
ROP7209S – ROP7230S ROP7231S
ROP7209A – ROP7230A ROP7231A
Shield Protector PerimeterSeel™ Shield Protector extends the life of expensive helmet shields. Adheres to helmet visor under laminated tearoffs, sealing out dirt, dust, moisture and preventing fogging and scratches. Offered in clear, smoke and amber. Part No.
Description
ROP3421CP3 .....ClearStack7 Shield Protector, Includes 3 Clear Laminated Layers, Each 4 Mil Thick, (3) Stacks Per Sleeve, Universal Narrow ROP7221AP3 .....AmberStack7 Shield Protector, Turns Clear Visor To High Contrast Amber, Includes 7 Laminated Layers, (3) Stacks Per Sleeve ROP7221SP3 .....SmokeStack7 Shield Protector, Turns Clear Visor To Smoke, Includes 7 Laminated Layers, (3) Stacks Layers Per Sleeve
Speed Tabs ROP8202 Round vinyl stickers prevent shredding and ease removal of tearoffs. Sold in rolls of 100.
Helmet Post Kit ROP9900
Multi-Mode Stopwatch ROBSC-501
30 Memory Speed Timer ROBSC-554 Perfect blend of speed and chronograph functions. • Speed timer displays lap speed in MPH/KPH • 30 lap memory of speed, lap time and number • Distance entry precise to 1/1000 MI/KM • Fastest and average lap times on demand • Twin chronographs: Lap or split timing modes • 1/100 second resolution to 24 hrs. • 30 Lap or split memory recall
Triple Timer ROBSC-888 Time up to three competitors at once, while including up to 450 memory recall. • Use as a single, double or triple stopwatch, speed timer or countdown timer. • 150 memory recall of each timer • Speed timer in MPH or KPH • User selectable lap or split timing display • Auto lap counter up to 999 for each timer • Average, fastest and slowest lap time and number • On-demand EL backlight
166
Provides two options: Interval lap or accumulated split timing. • Can be used for single events • 1/1000 second resolution to 24 hrs. • Auto release to running time • Single action time readings • Time out (pause) timing • Audible beep confirmation
Five Memory Chrono ROBSC-505 Multi-mode stopwatch with memory recall and lap counter. • Lap, split or event timing • 1/1000 second resolution to 24 hrs. • Five memory recall • Auto lap counter to 99 • Auto lap/split release • Single action time readings • 1st-5th place times • Time out (pause) timing
EL Backlight Chrono ROBSC-507 Use anytime, day or night, in low or no light conditions. • Backlight illuminates entire display • Lap, split or event timing • 1/1000 second resolution to 24 hrs. • Auto release to running time • Battery saving, 3 second EL shutoff • 1st and 2nd place finish times
2010
161-176OW10.indd 166
11/12/09 12:08:56 PM
NEW VENDOR
Motul 600 Brake Fluid RAPAUMOTUL Motul Brake Fluid is for use with all hydraulic actuated brake and clutch systems requiring a non-silicone, synthetic fluid. Motul 600 has a dry boiling point of 585°F and exceeds DOT3, DOT4 and DOT 5.1 specifications. Sold in .5 liter (16.9 oz.) plastic bottles.
Heat Shields RAPAU118HS S Rapco’s Heat Shields prevent rotorr to to caliper heat transfer. Shields are .060" 0" thick and packed four (one axle set) per per package. For Sierra XL and Wilwood Superlite II calipers only.
Drilled Rotor Bolt Kit RAPAU1352 Contains eight 5/16"-18 x 1" rotor bolts, cross-drilled for safety wire installation.
Cory Lawler
1-Weigh Scales REB110-1111 Oversize screen presents a full-time display of individual and four wheel weights, total weight and percentages at the touch of a button. Calculates left side, right side, rear and cross. Built-in, rechargeable batteries. Scales include charger, tangle free, color coded cables and 15" x 15" x 2-1/2" aluminum 1,500 lb. capacity pads.
Accu-Weigh II Scales REB110-1255 Electronic scales display any partial percentage without preprogrammed limits. Unit is easy to use with oversized, full time display of all four wheel weights, and any combination of cross, left, right, front or rear percentage rates. Low profile, 2-1/2" tall, 1,500 lb. capacity pads have built-in handles. Scales include tangle-free, color-coded cables, rechargeable batteries, charger, carrying case and a twoyear limited warranty.
Accutech Tire Pyrometer REB290-8730 A fast-response pyrometer with a 1500 degree temp range, low battery indicator and automatic shutoff. Compares temps with the push of a button. Probe and case included.
Pro Bar Padding XLT Flame retardant padding will not drip or melt in a fire. Absorbs energy well, but still retains resilience. 3' lengths. Part No.
Description
REB330-9015 ........... Black REB330-9025 ........... Red
Heavy Duty Switches Switches have silver-plated contacts with full 30 amp capacity, weatherproof covers, screw-on terminals and decal. Part No.
Description
REB160-1465 ........... Toggle Switch w/Aircraft Cover, Std. Ignition REB160-1470 ........... Toggle Switch w/Rubber Cover, Std. Ignition REB160-1485 ........... Starter Button w/Rubber Cover
Rebelite Warning System Systems watch over the engine, so driver can concentrate on driving. A light, sending unit, T-fitting for back of gauge (if applicable), 6' heat-resistant wire, terminals, instructions and label are included. Part No.
Description
REB140-1280 ........... Oil Pressure, 20 PSI, Regular Red Light REB140-1305 ........... Water Temp, 230°, Regular Amber Light
2010
161-176OW10.indd 167
167
11/12/09 12:38:14 PM
Engine Oils Race Oils The ultimate racing lubricants. Excellent lubricating properties add 2-4% more power while providing greatly increased high temperature protection. The film strength is among the highest of any petroleum or synthetic product. Rated as a single grade, yet low temperature properties make them exceptional as multi-grades. Oils contain very few detergents and are not recommended for street use. Sold in one quart bottles. Part No.
Formulated for limited slip differentials and manual transaxles. Additional limited slip additives are not required. The 75W80 is designed for transmissions requiring 80W GL-5 gear oils. The 75W90 is recommended for street or racing differentials, while 80W140 is recommended for heavily loaded or low-speed differentials. Sold in 1 qt. containers. Part No.
Description
RED50104 .........75W80 Gear Oil RED57904 .........75W90 Gear Oil RED58104 .........80W140 Gear Oil
Description
RED10204 .........20W (5W20), 1 Qt. Bottle RED10304 .........30W (10W30), 1 Qt. Bottle RED10404 .........40W (10W40), 1 Qt. Bottle RED10504 .........50W (15W50), 1 Qt. Bottle
60w And 70w Race Oil Oils are specially formulated for use in high load, ultra-high horsepower engines. Oil offer superior protection from piston scuffing, valvetrain and bearing abuse. Part No.
Description
RED10605 .........60W (20W60), 1 Gallon RED10705 .........70W, 1 Gallon
Motor Oils The most stable synthetic components give the highest degree of protection and cleanliness with the lowest friction. Red Line Oils provide superior wear protection and friction reduction over a wide temp. range for excellent performance in hot running engines. Sold in one quart bottles. Part No.
Description
RED15204 .........5W20 RED15304 .........5W30 RED15404 .........5W40 NEW! RED11304 .........10W30 RED11404 .........10W40 RED12504 .........20W50
Engine Break-In Additive RED81403 Engineered for use with conventional motor oils, specially formulated lubricant incorporates anti-wear additives including zinc and phosphorus (ZDDP) for added protection. Sold in a 16 oz. bottle, additive treats up to 12 qts. of motor oil.
ShockProof Gear Oils Available in heavy, lightweight and super light viscosities. Heavy gear oil resists throw-off and prevents tooth breakage. Ideal for high temperature and extreme pressure in differentials and manual transmissions. Lightweight gear oil is excellent in low temperatures and may also be used to obtain maximum power transfer in racing differentials. Super light oil has the viscosity of automatic transmission fluid. Ideal when maximum power output is required, such as during qualifying. Part No.
Description
RED58204 .........Heavy Gear Oil, 1 Qt. RED58206 .........Heavy Gear Oil, 5 Gal. RED58404 .........Lightweight Gear Oil, 1 Qt. RED58504 .........Super Light Gear Oil, 1 Qt.
168
Gear Oils
WaterWetter® RED80204 A unique wetting agent for cooling systems it reduces water temperatures as much as 30°F. WaterWetter® can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems. 12 oz. bottle.
Power Steering Fluid RED30404 Red Line’s Power Steering Fluid provides improved wear protection and resists thermal breakdown. Fully synthetic fluid also resists evaporation and foaming at high temperatures. Suitable in most power steering units. Sold in one quart bottles.
Shock Oil RED91105 Red Line Shock Oils change very little with temperature variations and actually lower shock absorber operating temperatures. Foaming resistance is excellent and synthetic base stocks provide little seal drag. One gallon container.
CV-2 Synthetic Grease RED80402 CV-2 Grease has a very high melting point, excellent water washout resistance, and superior anti-wear characteristics. Lubricant contains an organic moly and is great for wheel bearings, high-angle and conventional CVjoints, chassis lubrication and high temperature industrial equipment. Sold in a 14 oz. cartridge.
Alcohol Fuel Lubricant RED41102 A high-performance synthetic provides maximum power and extends engine life by reducing piston ring and fuel pump friction. 12 oz. container. Use one to two bottles per 55 gal. drum.
Assembly Lube Recommended by many leading engine builders, lubricant has three times greater film strength than conventional molybdenum disulfide greases. May be used on camshafts, lifters, piston skirts, main and rod bearings, etc. Part No.
Description
RED80312 .........Assembly Lube, 4 oz. RED80313 .........Assembly Lube, 16 oz.
2010
161-176OW10.indd 168
11/10/09 10:24:47 AM
Adjustable Hitch Bars
“The Goose” Gooseneck Hitch REE58079
Designed for weight distributing hitches, bars may be used in the raised or dropped position. Part No.
“The Goose” eliminates cutting the truck bed and may be used in conjunction with a Reese Fifth Wheel Hitch. Gooseneck style hitch features a 25,000 lb. gross trailer weight and 6,250 lb. pin weight capacities. Unit uses the same base rails as standard fifth wheel hitches, and may be quickly removed with four locking pins. Includes large, 2-5/16" dia. heattreated ball. Requires rails and installation kit.
Description
Length
Drop
Rise
REE3212 2" x 2" Hitch Bar 12" 1-5/8" 6-3/8" REE3215 2" x 2" Hitch Bar 13-1/2" 6-1/8" 10-7/8" REE54970 2" x 2" Hitch Bar 13" 1-1/4" 6-3/4"
Weight Carrying Draw Bars Rugged, heavy duty steel 2" x 2" Draw Bars have 1" dia. hitch ball holes.
Rails And Installation Kit REE30035
Part No.
Length
Drop
Rise
Trailer/Tongue Capacity, Lbs.
2" 4" 6"
3/4" 2-3/4" 4-3/4"
6000/600 6000/600 6000/600
REE21343 10-1/2" REE21345 11" REE21346 9-3/4"
Includes rails, components and hardware to install “The Goose” Gooseneck (REE58079) hitches. Note: Will not fit Ford F-150 4-door SuperCrew, SuperCab or any other 5-1/2' bed.
Hitch Balls Solid steel, chrome plated Hitch Balls are offered in a variety of sizes.
Class III/IV/V Receiver Hitches
Part No.
Reese offers custom fit (“no drill”) and universal Class III/IV/V Hitches. Each hitch includes mounting hardware. Hitch draw bar and ball must be purchased separately. Please see the receiver hitch rating guide below and call for specific applications.
Ball Dia. Shank Dia.
REE63891 2" REE63894 2-5/16"
1" 1"
Length
Capacity
2-1/8" 2-1/8"
6,000 Lbs. 6,000 Lbs.
Receiver Hitch Accessories REE63240
Receiver Hitch Rating Guide
REE63223
Weight Class
Gross Trailer Weight (GTW)
Tongue Weight (TW) With Weight Distributing (WD)
Class III Class IV Class V
8,000 Lbs. 12,000 Lbs. 14,000 Lbs.
800 Lbs. 1,200 Lbs. 1,700 Lbs.
High Performance Trunnion Style Weight Distributing Hitch Hitch includes a one-piece, cast head and a raised hitch ball platform to reduce the need for raised hitch balls. Also features easy to use adjusting blocks, and a new square adjusting washer which allows eight adjustments for extremely accurate weight distribution. It’s now possible to “fine tune” weight distribution on even the trickiest of rigs. Part No.
Description
REE66021† Weight-Distributing Hitch REE66022† Weight-Distributing Hitch † Hitch bar sold separately.
Max Hitch Wt.
Max GTW
800 Lbs. 1,200 Lbs.
12,000 Lbs 12,000 Lbs
Friction Sway Control REE26660 Friction brake design sway control unit keeps trailer and tow vehicle stable, increasing safety. Heavy duty unit, which may be easily installed or removed, may be used on the left and right side of trailer if desired. Note: Weight-distributing hitch not included; use of sway control with surge brakes is not recommended.
Part No.
Description
REE63223..........5/8" Drawbar Lock, Prevents Hitch Bar Theft, Fits 2" Receivers, Includes (2) Keys REE63240..........Pull Pin And Cotter Pin Set, Class III/IV, 5/8" Groove Style REE118020........7-Way Plastic Truck End Socket Connector REE118021........7-Way Plastic Trailer End Socket Connector
T-Connectors T-Connectors make quick work of wiring four-way flat plugs. Easily connect to the vehicle’s wiring harness for a factory appearance with no cutting, splicing or taping. Call for specific applications.
Brake Controls The BRAKEMAN Brake Controls are 100% solid state. Units meet all NHTSA regulations regarding tow vehicle/trailer stoplight activation. The perfect choice for today’s towing vehicles. Part No.
Description
REE83501..........Brake Control, 1 To 2 Axle Trailer REE83500..........Brake Control, 1 To 4 Axle Trailer Note: Brake Control Adapter Harnesses are available for popular applications.
2010
161-176OW10.indd 169
169
11/10/09 10:25:04 AM
DriverX Gloves
Impact Gloves
Gloves are made with revolutionary CarbonX, an inherently nonflammable material. Gloves are curved in a 3/4 closed position, which is exactly like holding on to a steering wheel. Available in single and double layer in black, blue or red. Sold in pairs with SFI tag affixed.
The ultimate mechanics Glove has an exclusive split palm of genuine Clarino® with a seamless, reinforced thumb and index finger. Gloves are machine washable with a lifetime guarantee.
Size
Size
Black
Blue
Red
Yellow
All Black
Small Medium Large X-Large XX-Large
RIN143-08 RIN143-09 RIN143-10 RIN143-11 RIN143-12
RIN141-08 RIN141-09 RIN141-10 RIN141-11 –
RIN145-08 RIN145-09 RIN145-10 RIN145-11 RIN145-12
RIN144-08 RIN144-09 RIN144-10 RIN144-11 RIN144-12
RIN147-08 RIN147-09 RIN147-10 RIN147-11 RIN147-12
Authentic Gloves Single palm enhances fit and hidden seams eliminate snagging. Clarino® finger and palm material ensure long life. Gloves are not flame proof or fire retardant. Washable, air dry only! (originally the 2000 series glove) Size
Black
Blue
Red
Yellow
Small Medium Large X-Large XX-Large
RIN133-08 RIN133-09 RIN133-10 RIN133-11 RIN133-12
RIN131-08 RIN131-09 RIN131-10 RIN131-11 RIN131-12
RIN135-08 RIN135-09 RIN135-10 RIN135-11 RIN135-12
RIN134-08 RIN134-09 RIN134-10 RIN134-11 RIN134-12
Small
Medium
Large
X-Large
XX-Large
RIN113-08
RIN113-09
RIN113-10
RIN113-11
RIN113-12
Large
X-Large
XX-Large
CarbonX, non-flammable balaclavas provide unequalled fire protection for head and face. Description
RIN423-10 .........Double Eye Port Balaclavas RIN423-20 .........Single Eye Port Balaclavas
Tire Buddy Gloves NEW! Tire Buddy gloves, specifically designed for pit crews, include rubberized Zues Clarino fingers and highly abrasion resistant, EVA foam-padded palms. Offered in black only. Small
Medium
Large
X-Large
XX-Large
RIN103-08
RIN103-09
RIN103-10
RIN103-11
RIN103-12
Crew/Shop Shoe NEW! Genuine, 100% leather uppers and composite EVA mid soles offer exceptional comfort and durability. The antislip sole delivers superb traction on slippery surfaces. Black only.
170
Medium
UnderX Balaclavas Part No.
RIN823-080 .............. 8 RIN823-085 .............. 8-1/2 RIN823-090 .............. 9 RIN823-095 .............. 9-1/2 RIN823-100 .............. 10 RIN823-105 .............. 10-1/2
Small
Long Sleeve Top RIN403-08 RIN403-09 RIN403-10 RIN403-11 RIN403-12 Short Sleeve Top RIN433-08 RIN433-09 RIN433-10 RIN433-11 RIN433-12 Long Pants RIN413-08 RIN413-09 RIN413-10 RIN413-11 RIN413-12
All new gloves offer vital protection from nicks, cuts and abrasions at an economical price. Easy to put on, gloves offer incredible dexterity. Available in Black/ White only.
Part No.
Red
Non-flammable CarbonX underwear provides an extra measure of fire protection. Offered in mock turtleneck with long sleeve, tee shirt with short sleeve and long pants in sizes small thru XX-large.
Quick Fit Gloves
Size
Blue
UnderX Underwear
Description
Part No.
Black
Single Layer - Meets SFI 3.3/1 Specs. Small RIN233-08 – – Medium RIN233-09 RIN231-009 RIN235-009 Large RIN233-10 RIN231-010 RIN235-010 X-Large RIN233-11 RIN231-011 RIN235-011 XX-Large RIN233-12 – – Double Layer - Meets SFI 3.3/5 Specs. Small RIN243-08 – – Medium RIN243-09 – – Large RIN243-10 – – X-Large RIN243-11 – – XX-Large RIN243-12 – –
Size
RIN823-110 .............. 11 RIN823-115 .............. 11-1/2 RIN823-120 .............. 12 RIN823-130 .............. 13 RIN823-140 .............. 14
Quick Fit Knee Protection System RIN553-09 A unique combination of neoprene athletic knee wrap and Velcro on a replaceable knee pad. Non-binding, comfortable pad may be repositioned for individual needs. Not a slip-on type, it easily wraps around knee area. One size fits all.
Kevlar Heat Sleeves RIN503-00 Dual layer Kevlar comfortably protects the forearms from burns, cuts and abrasions. Baked on Fibershield coating helps repel hot liquids. Sleeves may be worn with gloves. One size fits all.
2010
161-176OW10.indd 170
11/12/09 4:20:37 PM
SFI 3-2A/5 Quarter Midget Suit
Nomex 3 Shoes
The suits are constructed of 2-layers of fire retardant materials and sewn with high quality Nomex thread, Nomex cuffs and Nomex zippers.
Available in mid cut or high top styles with brushed leather trim and a Nomex fleece liner for extra comfort. Easy open/easy close Velcro top. Available in black, red, or blue, and in sizes 8-13. SFI 3.3/5 Rating.
Size
Black
JR 8/10 JR 10/12 JR 12/14 JR 14/16
Red
Blue
RJS1027-8-10 – – RJS1027-10-12 – – RJS1027-12-14 RJS1027-12-14-4 RJS1027-12-14-3 RJS1027-14-16 RJS1027-14-16-4 RJS1027-14-16-3
Size
Sprint Car Roll Cage Nets Sprint car nets are complete, easy-to-assemble with all mounting hardware and feature a quick release front. Nets are for 2-point hook-up. Description
Black
Blue
Red
2-Point Nets
RJS50524-1
RJS50524-1-3
RJS50524-1-4
5-Point Complete Wrap Around Harness Systems Description
JR 8/10
Red
Arm Restraints Universal arm restraints work with 3" lap belt, or the 4- or 5-way quick release. For use in all types of race cars, restraint is easy to install and comfortable to use. Made from 1" webbing with 2" arm bands and “D” ringed to prevent slippage. Description
Black
Blue
Red
RJS50522
RJS50522-3
RJS50522-4
Helmet Restraint RJS20214 Helmet restraint reduces neck fatigue and is easy to attach or remove. Adjusts easily and includes “D” ring attachment for installation. Compatible with any helmet. Offered in black only
Adult
Small
Medium
Large
X-Large
RJS20203L
RJS20203XL
RJS20204L
RJS20204XL
Description
Black
Red
Blue
Horseshoe Style 360° Style
RJS20216 RJS20216-1
RJS20216-4 RJS20216-1-4
RJS20216-3 RJS20216-1-3
Double layer gloves use two layers of knitted Nomex with top and bottom gauntlets, elasticized wrists, and calf skin palms. Single-layer Gloves are the same except for Velcro closures on back. Single layer gloves meet SFI 3.3/1, double layer gloves meet SFI 3.3/5 specs. Black
Single Layer Small RJS20213S Medium RJS20213M Large RJS20213L X-Large RJS20213XL Double Layer XX-Small RJS20212-XXS X-Small RJS20212-XS Medium RJS20212M Large RJS20212L X-Large RJS20212XL
Red
Blue
RJS20213S-4 RJS20213S-3 RJS20213M-4 RJS20213M-3 RJS20213L-4 RJS20213L-3 RJS20213XL-4 RJS20213XL-3 – – – – RJS20212M-4 RJS20212M-3 RJS20212L-4 RJS20212L-3 RJS20212XL-4 RJS20212XL-3
2010
161-176OW10.indd 171
JR 14/16
High density foam helmet supports are covered with Nomex and provide support to the neck and helmet, Velcro closure. Horseshoe and 360° Styles. Meets SFI 3.3 Specs.
Size
RJS20205
JR 12/14
Driving Gloves
Arm Restraints
Junior
– RJS20209-1-3-9 RJS20209-1-3-10 RJS20209-1-3-11 RJS20209-1-3-12 RJS20209-1-3-13
Helmet Supports
Wrap Around 2" Sub Belt RJS30298–19–06 RJS30298–19–06–3 RJS30298–19–06–4 3" Sub Belt RJS30298–19–23 RJS30298–19–23–3 –
RJS20205-1-JR
RJS20209-1-4-8 RJS20209-1-4-9 RJS20209-1-4-10 RJS20209-1-4-11 RJS20209-1-4-12 RJS20209-1-4-13
Nomex Underwear - Adult RJS20203XS RJS20203S RJS20203M Nomex Socks - Adult – – –
Belt hook-up and release is easy with the aluminum quick release mechanism. Belt ends are high quality 4130 chrome moly steel and each system meets SFI 16.1 specs. Available in wrap around style shoulder straps with 2" or 3" wide submarine belt in black, blue or red.
Nomex Hood
RJS20209-3-8 RJS20209-3-9 RJS20209-3-10 RJS20209-3-11 RJS20209-3-12 RJS20209-3-13
JR 10/12
X-Small
Blue
RJS20209-4-8 RJS20209-4-9 RJS20209-4-10 RJS20209-4-11 RJS20209-4-12 –
Nomex Underwear - Kids RJS20203-6-8 RJS20203-10-12 RJS20203-12-14 RJS20203-14-16
5-Point Quick Release Harness Systems
Black
Blue
Fire retardant underwear provide a vital thermal barrier for added safety. Sold in two-piece sets (top and bottom). Nomex socks are also available.
RJS50502-19-06-CWA ...........Black Harness With 2" Sub RJS50502-19-06-3-CWA .......Blue Harness With 2" Sub RJS50502-19-06-4-CWA .......Red Harness With 2" Sub
Description
Red
Nomex Underwear
Wrap-around, 5-point, 3" racing harness meets SFI 16.1 specs. Part No.
Black
Mid Cut 8 RJS20209-8 9 RJS20209-9 10 RJS20209-10 11 RJS20209-11 12 RJS20209-12 13 RJS20209-13 High Top 8 RJS20209-1-8 9 RJS20209-1-9 10 RJS20209-1-10 11 RJS20209-1-11 12 RJS20209-1-12 13 RJS20209-1-13
171
11/10/09 10:25:59 AM
High Performance Lubricants
SAE Grade Motor Oils
Royal Purple Extreme Performance and Racing (XPR) Motor Oil is the only engine oil with Synerlec, a superior lubricating ingredient which clings to all critical engine parts, creating less friction than any other petroleum or synthetic lubricant. Improved horsepower and longer engine life can be expected with this revolutionary lubrication product.
A Synthetic Oil formulated for the commercial or daily driven vehicle, helps reduce heat and prolongs engine life.
XPR SAE 0W10 An ultra-light viscosity Synthetic Oil recommended for small to medium displacement engines. Viscosity typical of a 0W10 oil. Part No.
Description
ROY01009 .........1 Qt. Bottle ROY05009 .........5 Gallon Pail
Description
1 Qt. Part No.
5 Gal. Pail Part No.
5W20 5W30 0W40 5W40 10W30 10W40 15W40 20W50 30W 40W 50W
ROY01520 ROY01530 ROY11484 ROY01540 ROY01130 ROY01140 ROY01154 ROY01250 ROY01030 ROY01040 ROY01050
– ROY05530 – – ROY05130 ROY05140 ROY05154 ROY05250 – – –
XPR SAE 5W20
Max-Gear Gear Oil
A light viscosity Synthetic Oil for small to medium displacement engines. Viscosity typical of 5W20 oil.
Max-Gear reduces frictional wear and heat through an impact-absorbing, non-shearing molecular structure.
Part No.
Description
ROY01011 .........1 Qt. Bottle ROY05011 .........5 Gallon Pail
XPR SAE 5W30 A horsepower and torque enhancing Synthetic Oil with superior wear characteristics. Viscosity typical of a 5W30 oil. Part No.
Description
ROY01021 .........1 Qt. Bottle ROY05021 .........5 Gallon Pail
XPR SAE 10W40 A Synthetic Oil capable of enduring long periods of extreme heat without breakdown. Viscosity typical of a 10W40 oil. Part No.
Description
ROY01041 .........1 Qt. Bottle ROY05041 .........5 Gallon Pail
Description
75W90 75W140 85W140
1 Qt. Part No.
5 Gal. Pail Part No.
ROY01300 ROY05300 ROY01301 – ROY01303 ROY05303
MaxEZ Power Steering Fluid ROY01326 A consistent, non-foaming high performance fluid that resists high temperatures, pressures and increases pump life. Sold in a 12 oz. bottle.
Purple Ice Radiator Super Coolant ROY01600 Reduces the surface tension of the coolant so it can better penetrate heat transfer areas of the radiator. Provides a protective coating for aluminum parts, prevents corrosion and lubricates pump seals. Ideal for use in racing where glycol (anti-freeze) is not used. Sold in 16 oz. bottle.
XPR SAE 20W50 A Synthetic Oil for performance engines that have used traditional 20W50 oils in the past. Provides as much as a 3% horsepower increase. Contains Synerlec, which has a very high load carrying capacity. Part No.
Description
ROY01051 .........1 Qt. Bottle ROY05051 .........5 Gallon Pail
Engine Break-In Oil ROY11487 Highly refined mineral oil contains high levels of zinc and phosphorous to protect flat tappet and roller camshafts and valve train at initial start-up, and to promote piston ring seating. One qt. bottle.
172
Ultra-Performance Grease ROY01312 Aluminum complex, water-resistant multi-service grease can withstand high temperatures and extreme loads. Sold by the tube.
Maxfilm Synthetic Penetrating Lubricant ROY10035 Stops squeaks, loosens rusted parts, prevents rust, corrosion and reduces wear. Maxfilm is so tough it can be used as a tapping fluid for cutting threads. Clings to metal surfaces for long lasting protection. Sold in 4 oz. aerosol can. Ground Shipment Only
2010
161-176OW10.indd 172
11/10/09 10:26:17 AM
Twist-Lok Hose Ends NEW!
Full Flow Hose Ends Reusable, anodized aluminum fittings are lightweight and durable. Taper-designed hose ends are easy to assemble. The 37° angled sealing surface is compatible with other manufacturers' hose ends. Choose from blue/red or black anodized fittings in swivel and nonswivel designs.
Lightweight aluminum hose ends are up to 40% lighter than conventional units and are easy to assemble or disassemble. The 37° sealing surface is compatible with other manufacturers' hose ends. Fittings are available in red/blue or black/silver anodizing. For use only with Twist-Lok hose. Dash Size
Dash Size
Straight Blue/Red
-4AN -6AN -8AN -10AN -12AN
RUS610010 RUS610020 RUS610030 RUS610040 RUS610050
Straight Black
45° Non-Swivel Blue/Red
45° Swivel Black
90° Non-Swivel Blue/Red
90° Swivel Black
RUS610013 – – RUS610150 – RUS610023 RUS610090 RUS613093 RUS610160 RUS613163 RUS610033 RUS610100 RUS613103 RUS610170 RUS613173 RUS610043 – RUS613113 RUS610180 RUS613183 RUS610053 – RUS613123 – RUS613193
Full Flow Swivel Pipe Thread Hose Ends Unique, pipe thread-to-hose swivel ends need no separate adapter for direct connection to fuel pumps, fuel filters, fuel regulators, oil pumps, etc. Red and blue anodized fittings have a tapered hose end for easy assembly, and the 37° angled sealing surface is compatible with other manufacturers' hose ends. Dash Size
Pipe Size
45° Swivel
90° Swivel
-6AN -6AN -8AN -10AN -12AN -12AN
1/4" 3/8" 1/2" 1/2" 1/2" 3/4"
– – RUS612020 RUS612030 RUS612040 –
RUS612090 RUS612100 RUS612110 RUS612120 RUS612130 RUS612140
-4 -6 -8 -10
Straight Straight 45° End Blue/Red Black/Silver Blue/Red
RUS624000 RUS624010 RUS624020 RUS624030
RUS624003 – RUS624073 RUS624150 RUS624013 RUS624080 RUS624083 RUS624160 RUS624023 – RUS624093 RUS624170 RUS624033 RUS624100 RUS624103 RUS624180
90° End Black/Silver
RUS624153 RUS624163 RUS624173 RUS624183
High quality, economical Twist-Lok hose is manufactured using a CPE synthetic rubber liner covered with a reinforcing fabric braid, resulting in a product that is lightweight and flexible. Hose is pressure rated up to 250 PSI, suitable for use with most fuel and oil systems. Not recommended for use with power steering systems. Compatible with all AN style fittings. Offered in black only.
-4 -6 -8 -10
O.D.
3 Feet
6 Feet
10 Feet
1/4" 15/32" RUS634343 RUS634353 RUS634103 3/8" 5/8" RUS634363 RUS634373 RUS634143 1/2" 23/32" RUS634383 RUS634393 RUS634183 5/8" 13/16" RUS634403 RUS634413 RUS634223
15 Feet
25 Feet
RUS634113 RUS634153 RUS634193 RUS634233
RUS634123 RUS634163 RUS634203 RUS634243
Competition Fuel Filters
Hose is lighter and easier to assemble than stainless steel braided hose and is compatible with fuel, oil or anti-freeze. The lightweight nylon fiber outer braid with extruded synthetic rubber core has a 350 PSI pressure rating and may be used with Full Flow swivel hose ends.
Billet aluminum, in-line filters for high volume fuel systems have 40 micron disc elements. Available with polished, red and blue, or black anodized finishes. Polished Part No.
Description
-6AN Male Ports, 3" L. x 1-1/4" Dia. -8AN Male Ports, 3-1/4" L. x 1-1/4" Dia.
Dash Size
3 Feet
6 Feet
10 Feet
20 Feet
-6 -8 -10 -12
RUS632053 RUS632103 RUS632153 RUS632203
RUS632063 RUS632113 RUS632163 RUS632213
RUS632073 RUS632123 RUS632173 RUS632223
RUS632093 RUS632143 RUS632193 RUS632243
Size
I.D.
OD.
3 Feet
6 Feet
10 Feet
7/32" 11/32" 7/16" 9/16" 11/16" 7/8"
1/2" 9/16" 5/8" 25/32" 29/32" 1-1/8"
RUS632000 RUS632050 RUS632100 RUS632150 RUS632200 RUS632250
RUS632010 RUS632060 RUS632110 RUS632160 RUS632210 RUS632260
RUS632020 RUS632070 RUS632120 RUS632170 RUS632220 –
15 Feet
Black Part No.
RUS650140 RUS650130 RUS650133 RUS650110 RUS650100 RUS650103
Special adapters are used to connect 3/8" or 1/2" aluminum tubing to -6AN or -8AN adapters. Crimp design prevents the requirement for tube flaring. Part No.
Description
RUS639200 .......-6AN Female Swivel To 3/8" Hose RUS639210 .......-6AN Male 37° To 3/8" Hose RUS639220 .......-8AN Female Swivel To 1/2" Hose RUS639230 .......-8AN Male 37° To 1/2" Hose
Stainless steel outer braid, and Chlorinated Polyethylene (CPL) synthetic liner with flexible nylon inner resist abrasion and will not collapse. Hose has a temperature range of -40°F to +350°F and is compatible with all hydrocarbon and alcohol-based fuels, lubricants and additives. For use with Full Flow Hose Ends. -4AN -6AN -8AN -10AN -12AN -16AN
Red/Blue Part No.
Aluminum Fuel Hose Adapters
Proflex Stainless Steel Braided Hose
Fuel Pressure Take Off Adapters All Adapters have a 1/8" NPT port. Part No. 20 Feet
– – RUS632080 RUS632090 RUS632130 RUS632140 RUS632180 – RUS632230 – – –
Dash Size
RUS670340 .......-6AN RUS670350 .......-8AN RUS670360 .......-10AN
Black Fuel Pressure Adapters All adapters have a 1/8" NPT port. Part No.
Description
RUS670063 .......Flare-To-Pipe Pressure Adapter, 3/8" NPT x -6AN RUS670083 .......Flare-To-Pipe Pressure Adapter, 3/8" NPT x -8AN RUS670343 .......Female-To-Male Fuel Pressure Take Off, -6AN RUS670353 .......Female-To-Male Fuel Pressure Take Off, -8AN
2010
161-176OW10.indd 173
90° End Blue/Red
Twist-Lok Hose NEW!
Dash Size I.D.
ProClassic Hose
45° End Black/Silver
173
11/10/09 10:26:48 AM
Qwik Release By Jiffy-Tite
Black AN Flare To NPT Adapters
Disconnect fittings in seconds. When disconnected, specially-valved, aluminum fittings prevent leakage, withstand up to 200 PSI and can handle fuel, oil or water. Fittings listed are valved and are interchangeable only with other valved fittings. RUS249106
Qwik Release Carb Fitting Kits Part No.
Description
RUS249106 .......-6AN Dual Feed Holley 750-1350 CFM, 7/8"-20 Threads RUS249308 .......-8AN Dual Feed Holley 750-1350 CFM, 7/8"-20 Threads RUS249318 .......-8AN Dual Feed Holley 750-1350 CFM, 7/8"-20 Threads, Methanol/Alcohol Applications
Dash Size NPT Size
-6 -6 -6 -8 -8 -10 -10 -12 -12
Fittings are valved for minimal flow restriction and will prevent fluid loss when disconnected. Used in a wide variety of fuel, oil or coolant configurations. One socket and one plug are needed to make a Qwik Release connection. Parts are interchangeable (see note). Size
End Type
Socket Part No.
Plug Part No.
37° AN Female -6AN Female RUS231106 RUS232106 -8AN Female RUS231108 RUS232108 37° AN Male -6AN Male RUS231206 RUS232206 -8AN Male RUS231208 RUS232208 -10AN Male RUS251210 – Pipe Thread Male 1/4" NPT Male – RUS222402 1/4" NPT Male – RUS232402 3/8" NPT Male – RUS232404 1/2" NPT Male – RUS252406 Reusable Hose End Straight -6AN N/A RUS221606 RUS222606 -6AN N/A RUS231606 RUS232606 -8AN N/A RUS231608 RUS232608 -10AN N/A RUS251610 – Reusable Hose End 45° Socket -6AN N/A RUS221706 – -8AN N/A RUS231708 – Reusable Hose End 90° Socket -6AN N/A RUS221806 – -8AN N/A RUS231806 – -10AN N/A RUS251810 – Note: Fittings are interchangeable within the same series only. For example; 22000 series fittings may not be used with 23000 or 25000 series.
Ron Koehler Motorsports
174
Straight
45°
90°
RUS660443 RUS660953 RUS660823 RUS660453 – – RUS660463 – RUS660843 RUS660483 RUS660963 RUS660863 RUS660493 – – RUS660503 RUS660973 RUS660883 RUS670033 – – RUS660523 – – RUS660513 – –
Black Fuel Cell Bulkheads Includes sealing washers and jam nuts. Part No.
Qwik Release Configurations
1/4" 1/8" 3/8" 3/8" 1/2" 1/2" 3/8" 1/2" 3/4"
Dash Size
RUS670850 .......-6AN RUS670860 .......-8AN RUS670870 .......-10AN RUS670880 .......-12AN
Black Allen Socket Pipe Plug Part No.
NPT Size
RUS662033 .......1/8" RUS662043 .......1/4" RUS662053 .......3/8" RUS662063 .......1/2"
RUS662043
Speed Bleeder Patented bleeder valve has a spring loaded, one-way ball and check valve. The stainless steel check ball opens to allow the old fluid and air out then closes automatically between pumps, preventing air from re-entering the line. Replaces original bleeder valve in caliper or wheel cylinder. Sold two per package. Part No.
Thread
Overall Length
RUS639510 RUS639540 RUS639590
7/16"-20 1/4-28 3/8-24
1.25" .940" 1.50"
Speed Bleeder Bag RUS639500 EPA-approved, 7" x 7" bag with plastic tubing and a tube connector holds approximately 12 ounces and makes brake bleeding a no-spill, no-mess operation.
Photos: Jim DenHamer
2010
161-176OW10.indd 174
11/10/09 10:27:19 AM
Sprint And Mini Sprint Radiators
Dry Sump Tank And Bracket
Sprint double pass radiator is designed for maximum efficiency. Brackets on side are used to Dzus right into the chassis. Mini-sprint radiator is 12" tall x 17-3/4" wide with 3/4"NPT inlet and outlet. Includes top flange and 3/8" pins for mounting to roll cage. Double pass design for exceptional cooling. Part No.
The tank has a 1-1/4" breather tube with single -16 return and -12 pickup exiting the bottom. Engine breathes through the oil tank. Eliminates the need for crossover tubes. Part No.
Description
PLASRS-15 ........Sprint Radiator, 21" x 20", 1-1/2 Outlet PLASRS-15CF ....Sprint Cross Flow Radiator, 20-5/8" x 16", 1-1/2 Outlet PLAMSR ............Mini-Sprint Radiator, 12" x 17-3/4", Chassis Mount
Description
PLAOT-626LH-IB....... Dry Sump Oil Tank, 26" Tall ................................. With An Internal Breather PLAOTMB-1 .............. One Piece Oil Tank Bracket With Clamps
SB Chevy Valve Covers PLAVC2-Single Aluminum valve covers with crossover and single breather.
Fuel Tanks
PLAOMS216-T
PLAOS28
Tank Part No.
Complete Assembly Part No.
PLAOS28
PLAAOS228C-T
PLAOMS16-T176
PLAOMS216-T
Description
28 Gallon Outlaw Tank With Collector Box And Top Pickup 16 Gallon Outlaw Tank
Wheel Wrenches Aluminum wheel wrenches for sprints and mini-sprints. Part No.
PLAWW-S-MED
PLAWW-MS
Description
PLAWW-S-MED......... Sprint PLAWW-MS .............. Mini Sprint
Utility Jugs Square, 5 gallon jug eliminates wasted space and fits flush against upright flat surfaces. Molded handle bleeds air into jug for quick pouring, and is positioned for balance and control. Part No.
Engine Cases Manufactured from tough LLDPE polypropylene, engine cases incorporate two plastic mounts that bolt directly to the motor mounts, while the rear of the engine is secured to the case using the bellhousing bolt holes. Available Sprint engine case SCR5106 includes a 4" taller interior height to accommodate the taller injectors and ignition. Part No.
Description
SCR5106 ...........Universal, 35" W x 35" L x 35" H SCR5108 ...........SB Chevy/Ford, 40" L. x 27" W. x 31" H. SCR5116 ...........SB Chevy/Ford Injected Sprint, 40" L. x 27" W. x 35" H NEW!
Color
Part No.
SCR2000DB........ Dark Blue SCR2000G .......... Green SCR2000GG........ Glow Green SCR2000GO........ Glow Orange SCR2000GP ........ Glow Pink
Color
SCR2000K ........ Black SCR2000O........ Orange SCR2000P ........ Purple SCR2000W ....... Clear SCR5221 SCR5223
Jug Accessories Part No.
Description
SCR5221 ...........Replacement Cap SCR5222 ...........Gasket SCR5222 SCR5223 ...........Replacement Vent SCR5224 ...........3/4" Pipe Plug SCR5225 ...........18" Screw-In Filler Hose
SCR5225
SCR2000DB
Funnels Durable polyethylene funnels are available in round or D-shapes in 14" and 8" sizes. The D-shaped funnel stores more easily and will not roll. Both styles have large lips around the edge to prevent liquids from backing up and out of the funnel. Part No.
Description
SCR6110R .........14" Red D-Shaped Funnel SCR6112R .........14" Red Round Funnel SCR6113R .........8" Red Round Funnel SCR6114R .........8" Red D-Shaped Funnel SCR6115R .........14" Red 45째 D-Shaped Funnel SCR6115Y .........14" Yellow 45째 D-Shaped Funnel SCR6119 ...........Red Funnel Filter (115 Micron)
SCR6113R
SCR5108
2010
161-176OW10.indd 175
175
11/12/09 11:45:20 AM
Shortie Front Hubs SND1006 Bolt-on, aluminum hubs fit sprint cars with SNDS501 aluminum spindles. Sold in pairs with Timken bearings and races, American-made grease seals, dust covers with O-rings, threaded drive studs and lug nuts. Replacement Components
Steel Splined Rear Brake Rotor SNDS586 Right rear 11" dia. brake rotor for use with Sander birdcages and single piston calipers.
Rear Cam Drive Components Part No.
Description
SNDS105S.........Dust Cover, Each SNDS113 ...........Lug Nut, 5/8"-11, Each SNDS132 ...........Bearing And Seal Kit, Pair
SNDS202 ...........Cam Drive, Std. RH 9/16"-18 Threads, 1" Long Body, 1-5/8" Overall Length SNDS202-L .......Cam Drive, Long RH 9/16"-18 Threads, 1-1/2" Long Body, 2-1/8" Overall Length SNDS203 ...........2.100" O.D. Cam Seal, Includes Plate And Seal For SB Chevy SNDS203-R .......2.380" O.D. Cam Seal, Includes Plate And Seal For Rodeck SB Chevy
Direct Mount Hubs SND1015-15F-9
Racing Wheels
Part No.
Description
Forged aluminum Hubs directly replace front wheel centers on Superlite type spindles. Hubs are sold in pairs with Timken bearings and races, seals, dust covers with O-rings, studs and lug nuts. Replacement Components Part No.
Description
SNDS105S.........Dust Cover SNDS113 ...........Lug Nut, 5/8"-11, Each SNDS132 ...........Bearing And Seal Kit, Pair
Shortie Spindles SNDS501 Sander style aluminum spindles have tubular spindle pins. Sold individually with spindle nuts, locking pins and washers. Use with SND1006 or SND1015-15F-9 front hubs. Replacement Components Part No.
CNC, cold-spun wheel halves are cold formed over a two stage mandrel and heat treated twice resulting in a perfect wheel. Bead locks are billet, not formed or welded. Six-pin centers are machined from billet for maximum weight savings and splined centers are cast from magnesium. Halves are polished and lock ring is anodized. Include mud covers. Part No.
Description
Size
Back Spacing
SND15-083-DN SND15-084-DN SND15-145-SI1 SND15-155-SI1 SND15-156-SI1 SND15-157-SI1 SND15-175-S02 SND15-176-S02 SND15-185-S02 SND15-186-S02
Direct Mount Wheel, No Beadlock Direct Mount Wheel, No Beadlock Splined Wheel, Inside Beadlock #1 Splined Wheel, Inside Beadlock #1 Splined Wheel, Inside Beadlock #1 Splined Wheel, Inside Beadlock #1 Splined Wheel, Outside Beadlock #2 Splined Wheel, Outside Beadlock #2 Splined Wheel, Outside Beadlock #2 Splined Wheel, Outside Beadlock #2
15" x 8" 15" x 8" 15" x 14" 15" x 15" 15" x 15" 15" x 15" 15" x 17" 15" x 17" 15" x 18" 15" x 18"
3" 4" 5" 5" 6" 7" 5" 6" 5" 6"
Description
SNDS512 ...........Spindle Nut And Washer Kit, Pair SNDS512-P .......Spindle Pin Only SNDS512W ........Spindle Washer Only SNDS514 ...........King Pin Bushing, Sold Each (Must Be Honed After Installation)
Tubular King Pins And Caps Part No.
Description
SNDS167-O .......Superlite Tubular King Pin, .859" Dia., Fits SNDS501 Spindle With SNDS167CBL Cap Or SNDS509 Spindle With SNDS167CB Cap SNDS167-1 .......Sprint Tubular King Pin, .859" Dia., Fits SNDS500 Or SNDS501 Spindles With SNDS167C Cap SNDS167-3 .......Same As SNDS167-1, But Oversize .869" Dia. SNDS167C.........Locking Cap, 1/2"-20 Threads SNDS167CB ......Locking Cap, 5/8"-18 Threads SNDS167CBL.....Locking Cap, 5/8"-18 Threads, Step Cap
176
Wheel Accessories Part No.
Description
SND1-08 ...........15" x 8" Wheel Half, No Beadlock SND1-08L..........15" x 8" Wheel Half With Beadlock Ring SND1017-15 .....Aluminum Front Wheel Center, 6-Pin, 15-Hole Bolt Circle, 3/8" Flange SND1020-15 .....Magnesium Splined Rear Wheel Center SND1020-15F....Forged Aluminum Splined Rear Wheel Center SND15-010 .......15" 16-Bolt Beadlock Ring, #1 Type, No Mud Cover SND15-020 .......15" 16-Bolt Beadlock Ring, #2 Type, No Mud Cover SND15-021 .......15" 16-Bolt Beadlock Ring, #2 Type, With Mud Cover SND15-022 .......Mud Cover, #2 Type, With Quick Fastener Button
2010
161-176OW10.indd 176
11/10/09 10:28:13 AM
Tubular Torsion Bars
Sprint Steering And Combo Steering Arms
Tubular torsion bars cut approximately 3 lbs. and react more quickly. All have 1-1/8" x 48-spline with 1" bushings and a 3/4" hole thru.
Part No.
Part No.
Description
SNDS155-30-1000 ... 1-1/8" Torsion Bar, 30" Long, 1.000" Bar Dia. SNDS155-30-1025 ... 1-1/8" Torsion Bar, 30" Long, 1.025" Bar Dia. SNDS155-30-1050 ... 1-1/8" Torsion Bar, 30" Long, 1.050" Bar Dia.
Torsion Bar Bushings Part No.
Description
SNDS148B.........Bronze Torsion Bar Bushing, Fits 1-1/2" Tube With .120" Wall SNDS149 ...........Aluminum Torsion Bar Bushing, Fits 1-1/2" Tube With .095" Wall SNDS149B.........Bronze Torsion Bar Bushing, Fits 1-1/2" Tube With .095" Wall
10-10 Couplers SNDS170 Standard, splined steel couplers are heat treated, case hardened and guaranteed to be true and straight.
Description
SNDS505 ...........Aluminum Steering Arm, For SNDS501 Spindle SNDS507 ...........Aluminum Steering Arm SNDS508C.........Aluminum Combo Arm
Front Brake Hat SND1055 Lightweight aluminum Hat fits 12.18" dia. vented rotor and should be used with SNDS517 mounting stands which mount to the back side of the SND1006 hubs with 8 x 7.62" bolt pattern rotor.
Front Rotor Mount Kit SNDS517 Kit includes 3 stands and 3 flat head bolts, both with 1/2"-20 threads.
Brake Brackets All brackets include fasteners.
Aluminum U-Joint Assembly SNDS304A
Part No.
SND1059
Description
Tubular Driveshafts
SND1054 ...........Front Mount Bracket For 4-Piston Caliper, 5.25" Mount, 1999 And Older SNDS501 Spindles, Use With 12.18" Vented Rotor And SNDS1055 Rotor Hat, Each SND1054-2 .......Front Mount Bracket For 4-Piston Caliper, 5.25" Mount, 2000 And Newer SNDS501 Spindles, Each SND1059 ...........Top Mount Left Front Brake Bracket Kit, For Single-Piston Calipers, Use With 11" Aluminum Or Steel Rotors, Fits Superlite Spindles SNDS509
Super strong, lightweight driveshafts have 16-10 splines and are available in 30" and 32".
Wheel Savers
Part No.
Protect wheel centers from lug nut wear.
Aluminum U-joint Assembly eliminates over 2 lbs. of rotating weight.
Description
SNDS164-16-30 ....... Tubular Driveshaft, 30" Long SNDS164-16-32 ....... Tubular Driveshaft, 32" Long
Billet Birdcages SND4086
Part No.
Description
SNDS416 ...........3-Pin Wheel Saver SNDS417 ...........6-Pin Wheel Saver, Required By USAC On RF When Racing On Paved Tracks
True, one-piece billet aluminum birdcage assemblies include built-in levels for timing. Use with 14" ladders and Sander SNDS620-1 clevis. Sold per pair.
Birdcage Clevis Part No.
Description
SNDS620-1 .......Steel W-Link Clevis, 1/2" Shank, 3/8" Hole For Pin, For Birdcages With A 1/2" Clevis Hole SNDS620 ...........Steel W-Link Clevis, 5/8" Shank, 3/8" Hole For Pin, For Birdcages With A 5/8" Clevis Hole
Chris Windom
Photo: Jim DenHamer
2010
177-192OW10.indd 177
177
11/10/09 10:33:33 AM
4340 Forged Steel Crankshafts
Series 9000 Cast Pro Comp Crankshafts
Cranks are Nitride hardened and straightened, with large fillet radii on all journals for increased lubrication. All rod journals have lightening holes. Each crank has straight shot, back-drilled oiling for maximum efficiency. Available in standard, lightweight and superlight models. Lightweight cranks are knife-edged and profiled for weight reduction. Superlight cranks feature pendulum undercut counterweights for additional weight reduction. All cranks are micropolished and inspected.
Crankshafts have Aero-wing counterweights, fully chamfered oil holes, .125" fillet radius on all journals, shot-peened surfaces for increased strength, knife edged counterweights, lightening holes in all rod throws and a full round rear flange. Also available in lightweight versions.
Part No.
Description
Stroke
Rod Length
SB Chevy 350 SCA4-350-3480-5700 Standard 3.480" 5.700" SCA4-350-3480-5700-2 Lightweight 3.480" 5.700" SCA4-350-3480-5700-3 Superlight 3.480" 5.700" SCA4-350-3500-5700-2 Lightweight 3.500" 5.700" SCA4-350-3500-5700-3 Superlight 3.500" 5.700" SCA4-350-3500-5700-3-2* Superlight 3.500" 5.700" SCA4-350-3750-5700 Standard 3.750" 5.700" SCA4-350-3750-5700-L† Standard 3.750" 5.700" SCA4-350-3750-6000 Standard 3.750" 6.000" SCA4-350-3750-6000-2 Lightweight 3.750" 6.000" SCA4-350-3750-6000-3 Superlight 3.750" 6.000" SCA4-350-3875-6000 Standard 3.875" 6.000" SCA4-350-4000-6000 Standard 4.000" 6.000" SB Chevy 400 SCA4-400-3500-6000 Standard 3.500" 6.000" SCA4-400-3750-5700 Standard 3.750" 5.700" SCA4-400-3750-6000 Standard 3.750" 6.000" SCA4-400-3750-6000-2 Lightweight 3.750" 6.000" SCA4-400-3750-6000-3 Superlight 3.750" 6.000" SCA4-400-3800-6000 Standard 3.800" 6.000" SCA4-400-3875-6000 Standard 3.875" 6.000" *Small rod journal 2.000" crankshaft. †1-Piece rear main seal.
Rod Journal
2.100" 2.100" 2.100" 2.100" 2.100" 2.000" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100" 2.100"
Performance Forged Pistons SRP pistons, manufactured by JE, are “making performance affordable”. SRP specific designed forgings eliminate several phases of the manufacturing process, saving time and cutting costs with high volume production. All pistons are machined to accept 1/16" top, 1/16" second and 3/16" oil rings. Sold in sets of eight, with wrist pins and double Spiro Locks Bore Size
Part No.
Stroke
Rod Length
Dish/Dome Volume
Comp. Height
Comp. Ratio
Small Block Chevy High Compression Domed Pistons SRP140678 4.030" 3.480" 6.000" 11cc 1.260" 12.9:1 SRP140348* 4.030" 3.750" 6.000" 7cc 1.125" 12.9:1 SRP140679 4.040" 3.480" 6.000" 11cc 1.260" 13.0:1 SRP140349* 4.040" 3.750" 6.000" 7cc 1.125" 12.9:1 SRP140680 4.060" 3.480" 6.000" 11cc 1.260" 13.0:1 SRP140350* 4.060" 3.750" 6.000" 7cc 1.125" 13.0:1 SRP142021 4.155" 3.750" 5.700" 4cc 1.425" 12.9:1 SRP142024* 4.155" 3.750" 6.000" 4cc 1.125" 12.9:1 SRP142035 4.165" 3.480" 6.000" 9cc 1.260" 13.0:1 SRP142025* 4.165" 3.750" 6.000" 4cc 1.125" 12.9:1 Notes: Compression ratios based on the following combustion chambers: SB Chevy: 64cc, *Oil rail supports included.
178
Part No.
SB Chevy 350 SCA9-350-3480-5700 SCA9-350-3750-5700 SCA9-350-3750-5700-L† SCA9-350-3750-6000 SB Chevy 400 SCA9-400-3500-6000 SCA9-400-3750-5700 SCA9-400-3750-6000 † 1-Piece rear main seal.
Description
Stroke
Rod Length
Rod Journal
Pro Comp Pro Comp Pro Comp Pro Comp
3.480" 3.750" 3.750" 3.750"
5.700" 5.700" 5.700" 6.000"
2.100" 2.100" 2.100" 2.100"
Pro Comp Pro Comp Pro Comp
3.500" 3.750" 3.750"
6.000" 5.700" 6.000"
2.100" 2.100" 2.100"
4340 Forged H-Beam Connecting Rods Profiled H-beam connecting rods are compatible with many popular stroker engines and the dowelled caps provide a superb fit. All rods are fitted with ARP bolts and sold in balanced sets of eight. Part No.
Description
Length
Journal
Pin
SB Chevy SCA2-350-5700-2100 SCA2-350-6000-2100
Bushed Bushed
5.700" 6.000"
2.100" 2.100"
.940" .940"
Comp. Height
Comp. Ratio
Professional Piston And Ring Kits Revolutionary piston kits have modern racing pistons with low friction metric ring sets. Kits include lightweight forged side relief (FSR) pistons, wrist pins with carbon steel wire locks, and JE Pro Seal premium piston ring set, complete with 1.2mm premium steel top rings, 1.5mm Napier second rings and 3.0mm standard tension oil rings.
Part No.
Bore Size
Stroke
Rod Length
Dish / Dome Volume
Small Block Chevy High Compression Domed Pistons SRP271058 4.030" 3.750" 6.000" 7cc 1.125" 12.9:1 SRP271059 4.030" 3.480" 6.000" 11cc 1.260" 12.7:1 SRP271066 4.155" 3.750" 6.000" 4cc 1.125" 13.0:1 Notes: Compression Ratios Are Based On The Following Combustion Chambers: SB Chevy: 64cc
2010
177-192OW10.indd 178
11/10/09 10:33:53 AM
Pro Seal Head Gaskets
Dyno-Pak Bulk Gasket Sets
Graphite composite gaskets are clinched to a steel core and protected by 321 stainless steel fire ring armor for exceptional performance, durability and easy installation. Sold individually.
Packaged for the engine builder. Sets include ten gaskets.
Part No.
Description
Part No.
Gasket Bore
Thickness
4.100" 4.140" 4.140"
.015" .039" .059"
SCE511101† Small Block Chevy 265-400 SCE511144 Small Block Chevy 265-400 SCE511146 Small Block Chevy 265-400 † Embossed Steel Shim Head Gasket.
Timing Cover, Water Pump And Fuel Pump Gasket Set SCE11100
Accu-Seal Intake Gaskets Gaskets are available in standard Accu-Seal “E” and premium Accu-Seal Pro. Accu-Seal Pro gaskets have the added benefit of silicone beading around the ports and water passages. Part No.
Description
Small Block Chevy 265-400 SCE111124 Accu-Seal “E” SCE211102 Accu-Seal Pro
Set includes one each of timing cover, water pump and fuel pump gaskets for small block Chevy 265-400.
Port Type
Thk.
Pro Topline 14° 23°/1.32" x 2.19"
1/16" 1/16"
Accu-Seal “E” Oil Pan Gasket SCE11090
Pro Copper Exhaust Gaskets
Premium Accu-Seal “E” oil pan gaskets are .090" thick, have exceptional sealing qualities and fit small block Chevy, 1975-79 LH dipstick.
SCE offers exhaust gaskets in dead soft copper, a very durable material that will never blow out. Gaskets are embossed unless noted otherwise. Part No.
Description
Small Block Chevy 265-400 SCE202 .............Distributor Gaskets SCE1100-10 ......Timing Cover Gaskets SCE1101-10 ......Water Pump Gaskets SCE1102-10 ......Timing Cover Seals SCE1104-10 ......Rear Main Seals, 2-Pc. Viton SCE1105-10 ......Rear Main Seals, 2-Pc. Silicone SCE1107-10 ......4-Bolt Fuel Pump Plate Gaskets SCE11090-10 ....Oil Pan Gasket, 1975-85 LH Dipstick, Thick Ft. Seal
Accu-Seal “E” Rear Main Seals SCE11105 Fit small block Chevy, 1957-74, 2-Piece.
Port Type
Small Block Chevy 265-400 SCE011186* ......Round 1.50" Dia. SCE011486* ......Hooker/Stahl/1.875" Dia. SCE4011 ...........Round 1.50" Dia. SCE4111 ...........18° Cyl. Heads SCE4211 ...........Square 1.50" x 1.437" SCE4311 ...........“D”-Part With 1.75" Dia. Primary Tubes *Flat Gasket
Coil-Over Springs High-quality chrome silicon springs have a steel blue epoxy finish and are metal tagged for easy identification. All diameters and rates are in stock. Rate
12" Tall
80 100 110 120 140 150 160 180 200 220 240 260 280 300 320 340 380 400 440 500
SSSB80 SSSB100 SSSB110 – SSSB140 SSSB150 – – SSSB200 – – – – SSSB300 – – – SSSB400 – SSSB500
2-1/2" Dia. 10" Tall
SSSC80 SSSC100 – – – SSSC150 – – SSSC200 – – – – SSSC300 – – – SSSC400 – SSSC500
8" Tall
– – – – – SSSD150 – – SSSD200 – – – – SSSD300 – – – SSSD400 – –
1-7/8" Dia. 10" Tall 8" Tall
– SSSZA100 SSSZA110 SSSZA120 SSSZA140 SSSZA150 SSSZA160 SSSZA180 SSSZA200 SSSZA220 SSSZA240 SSSZA260 SSSZA280 SSSZA300 SSSZA320 SSSZA340 SSSZA380 – SSSZA440 SSSZA500
SSSZZ080 SSSZZ100 – SSSZZ120 SSSZZ140 – SSSZZ160 SSSZZ180 SSSZZ200 SSSZZ220 SSSZZ240 SSSZZ260 SSSZZ280 SSSZZ300 SSSZZ320 – – – –
2010
177-192OW10.indd 179
179
11/12/09 11:30:49 AM
Professional Series Quick Change Gears
Sportsman Series Quick Change Gears
Gears are aircraft grade steel for maximum strength. Each gear has a shaved finish to minimize backlash and run out, and is broached for 10-spline shaft. A 5-step heat treating process yields maximum gear life for high stress applications. Gears have a black oxide finish, and lightened faces to reduce rotating weight without sacrificing strength.
Gear Set No.
SCS01 SCS02 SCS05 SCS15 SCS15K SCS26 SCS06 SCS25 SCS12 SCS07 SCS07K SCS17 SCS08K SCS08 SCS19 SCS09K SCS09 SCS11 SCS03 SCS13 SCS18 SCS04K SCS04 SCS20 SCS22 SCS16 SCS10 SCS34 SCS14 SCS14K SCS35 SCS32K SCS24 SCS36 SCS37 SCS23 SCS21 SCS27 SCS43 SCS28 SCS29 SCS30 SCS41 SCS31 SCS33K SCS33 SCS31K SCS30K
180
4.11 Ring and Pinion (9-37 Teeth) Low High
4.11 3.96 3.94 3.90 3.85 3.83 3.78 3.74 3.68 3.63 3.58 3.55 3.49 3.48 3.45 3.42 3.39 3.35 3.31 3.29 3.25 3.21 3.18 3.16 3.12 3.08 3.04 3.00 2.95 2.93 2.91 2.87 2.83 2.80 2.78 2.74 2.69 2.66 2.63 2.60 2.57 2.53 2.49 2.46 2.43 2.41 2.39 2.37
4.11 4.26 4.28 4.33 4.38 4.41 4.46 4.52 4.58 4.64 4.69 4.76 4.83 4.85 4.89 4.93 4.97 5.04 5.10 5.14 5.19 5.26 5.31 5.34 5.41 5.48 5.55 5.63 5.72 5.76 5.80 5.89 5.96 6.04 6.07 6.16 6.28 6.35 6.42 6.49 6.58 6.67 6.77 6.85 6.94 7.00 7.05 7.12
No. Of Teeth
28/28 27/28 24/25 19/20 15/16 27/29 23/25 20/22 26/29 23/26 21/24 19/22 17/20 22/26 21/25 25/30 19/23 22/27 25/31 20/25 19/24 18/23 24/31 20/26 19/25 24/32 20/27 19/26 23/32 20/28 17/24 23/33 20/29 17/25 23/34 18/27 17/26 22/34 16/25 19/30 15/24 16/26 17/28 21/35 16/27 17/29 14/24 15/26
A quality gear priced for the sportsman racer! Sportsman Series, unlightened 10-spline gears are CNC crown hobbed from 8620 material, then heat treated and REM finished prior to shipment.
Gear Set No.
4.86 Ring and Pinion (7-34 Teeth) Low High
4.86 4.68 4.66 4.61 4.56 4.52 4.47 4.42 4.36 4.30 4.23 4.19 4.13 4.11 4.08 4.05 4.01 3.96 3.92 3.89 3.85 3.80 3.76 3.74 3.69 3.65 3.60 3.55 3.50 3.47 3.44 3.39 3.35 3.30 3.29 3.24 3.18 3.15 3.11 3.08 3.04 2.99 2.95 2.91 2.88 2.85 2.83 2.80
4.86 5.04 5.07 5.12 5.18 5.22 5.28 5.35 5.42 5.49 5.54 5.63 5.71 5.75 5.78 5.83 5.88 5.97 6.03 6.08 6.13 6.21 6.28 6.32 6.39 6.48 6.56 6.65 6.76 6.81 6.86 6.97 7.04 7.15 7.18 7.29 7.43 7.51 7.59 7.67 7.77 7.89 8.00 8.10 8.20 8.28 8.33 8.42
4.11 Ring and Pinion (9-37 Teeth) Low High
No. Of Teeth
4.86 Ring and Pinion (7-34 Teeth) Low High
SCS101 4.11 4.11 28/28 4.86 4.86 SCS102 3.96 4.26 27/28 4.68 5.04 SCS105 3.94 4.28 24/25 4.66 5.07 SCS1015 3.90 4.33 19/20 4.61 5.12 SCS1015K 3.85 4.38 15/16 4.56 5.18 SCS1026 3.83 4.41 27/29 4.52 5.24 SCS106 3.78 4.46 23/25 4.47 5.28 SCS1025 3.74 4.52 20/22 4.42 5.35 SCS1012 3.68 4.58 26/29 4.36 5.42 SCS107 3.63 4.64 23/26 4.30 5.49 SCS107K 3.58 4.69 21/24 4.23 5.54 SCS1017 3.55 4.76 19/22 4.19 5.63 SCS108K 3.49 4.83 17/20 4.13 5.71 SCS108 3.48 4.85 22/26 4.11 5.75 SCS1019 3.45 4.89 21/25 4.08 5.78 SCS109K 3.42 4.93 25/30 4.05 5.83 SCS109 3.39 4.97 19/23 4.01 5.88 SCS1011 3.35 5.04 22/27 3.96 5.97 SCS103 3.31 5.10 25/31 3.92 6.03 SCS1013 3.29 5.14 20/25 3.89 6.08 SCS1018 3.25 5.19 19/24 3.85 6.13 SCS104K 3.21 5.26 18/23 3.80 6.21 SCS104 3.18 5.31 24/31 3.76 6.28 SCS1020 3.16 5.34 20/26 3.74 6.32 SCS1022 3.12 5.41 19/25 3.69 6.39 SCS1016 3.08 5.48 24/32 3.65 6.48 SCS1010 3.04 5.55 20/27 3.60 6.56 SCS1034 3.00 5.63 19/26 3.55 6.65 SCS1014 2.95 5.72 23/32 3.50 6.76 SCS1014K 2.93 5.76 20/28 3.47 6.81 SCS1035 2.91 5.80 17/24 3.44 6.86 SCS1032K 2.87 5.89 23/33 3.39 6.97 SCS1024 2.83 5.96 20/29 3.35 7.04 SCS1036 2.80 6.04 17/25 3.30 7.15 SCS1037 2.78 6.07 23/34 3.29 7.18 SCS1023 2.74 6.16 18/27 3.24 7.29 SCS1021 2.69 6.28 17/26 3.18 7.43 SCS1027 2.66 6.35 22/34 3.15 7.51 SCS1043 2.63 6.42 16/25 3.11 7.59 SCS1028 2.60 6.49 19/30 3.08 7.67 SCS1029 2.57 6.58 15/24 3.04 7.77 SCS1030 2.53 6.67 16/26 2.99 7.89 SCS1041 2.49 6.77 17/28 2.95 8.00 SCS1031 2.46 6.85 21/35 2.91 8.10 SCS1033K 2.43 6.94 16/27 2.88 8.20 Note: On short tracks such as 1/4, 3/8, and 1/2 mile, the larger gear is most commonly used on top. Example: If you have a 4:11 ring and pinion and you install a #4 gear set with the big gear on top you will have a 5:31 ratio. • High designation on chart means higher numerical number, but lower gear ratio. • Low designation on chart means lower numerical number, but higher gear ratio.
2010
177-192OW10.indd 180
11/10/09 10:34:12 AM
Straight Tube Style Headers
Short Collector Style Headers
Headers are formed from 18 gauge tubing with less bends for increased flow. 32" primaries dump into long collectors for increased bottom end torque. Clearance from head to inside surface of header tubes is 4".
Headers feature 32" long primary tubes, die stamped flanges and short collectors. Offered for SB Chevy standard exhaust port only.
Std. Part No.
Spread Port Part No.
Description
Tube Dia.
Collector Dia./Length
SCH1054LV SCH1054LVSP Chevy “Step” Headers 1-3/4"–1-7/8" 3-1/2" x 13" SCH1055L SCH1055LDN Chevy Headers 1-7/8" 3-1/2" x 13" SCH1055LV SCH1055LVDN Chevy “Step” Headers 1-7/8"–2" 3-1/2" x 13" – SCH1056LDN Chevy Headers 2" 3-1/2" x 13" – SCH1055LVDN-16 Chevy “Step” Headers 1-7/8"-2 3-1/2" x 16"
Description
Tube Dia.
Collector Dia./Length
SCH1014L SCH1014LV SCH1015L SCH1015LV
Chevy Headers Chevy “Step” Headers Chevy Headers Chevy “Step” Headers
1-3/4" 1-3/4"–1-7/8" 1-7/8" 1-7/8"–2"
3-1/2" x 8" 3-1/2" x 9" 3-1/2" x 9" 3-1/2" x 9"
Asphalt Sprint Car Headers SCH1015LVDNB Spread port SB Chevy headers feature laser cut flanges, stepped 1-7/8"–2" primary tubes and 3-1/2" dia. x 13" collectors.
Standard Headers Headers are formed from 18 gauge tubing with 32" long primaries, long collectors and CNC laser cut flanges to clear down nozzles. For spread port applications.
Racing Mufflers
Spread Port Part No.
Description
Tube Dia.
Collector Dia./Length
SCH1014LSP SCH1014LVSP SCH1015LDN SCH1015LVDN SCH1016LDN
Chevy Headers Chevy “Step” Headers Chevy Headers Chevy “Step” Headers Chevy Headers
1-3/4" 1-3/4"–1-7/8" 1-7/8" 1-7/8"–2" 2"
3-1/2" x 13" 3-1/2" x 13" 3-1/2" x 13" 3-1/2" x 13" 3-1/2" x 13"
Forward Style Headers Headers allow more room for muffler clearance. Headers have 32" long primary tubes and long collectors for added bottom end torque and fit spread port heads.
Part No.
Length
Core Dia.
Inlet Dia.
Body Dia.
SCH63030 6" 3" 3" 3.5" SCH63535 6" 3-1/2" 3-1/2" 4" SCH83030 8" 3" 3" 3-1/2" SCH83535 8" 3-1/2" 3-1/2" 4" SCH92535 9" 3-1/2" 3-1/4" 4" SCH103535K* 10" 3-1/2" 3-1/2" 4-3/8" SCH112530 11" 2-1/2" 3" 4" SCH112535** 11" 2-1/2" 3-1/2" 4-3/8" SCH113035 11" 3-1/2" 3-1/2" 4-3/8" *Mandatory At Knoxville, IA Raceway **Mandatory For All Stars, ASCS, WOO And SOD Sprints
Insert Mufflers
Spread Port Part No.
Description
Tube Dia.
Collector Dia./Length
SCH1025LDN SCH1025LVDN SCH1026LDN
Chevy Headers Chevy “Step” Headers Chevy Headers
1-7/8" 1-7/8"–2" 2"
3-1/2" x 13" 3-1/2" x 13" 3-1/2" x 13"
Lightweight, 4" Insert for exhaust tubing or collector. Part No.
Description
SCH42530 .........2.5" Core, Fits 3" Collector SCH43035 .........3" Core, Fits 3.5" Collector SCH43540 .........3.5" Core, Fits 4" Collector
Header Gaskets
Turn-Outs
The same gaskets that are packed with Schoenfeld headers.
Adjust exhaust exit angle in any direction. Part No.
Part No.
Description
Part No.
SCH3025 ...........3" Diameter SCH3525 ...........3.5" Diameter
Description
SCH01501 .........SB Chevy 1-5/8" Square SCH01511 .........SB Chevy 1-3/4" Round SCH01533 .........SB Chevy Brodix Spread Port
SCH01511
How To Information Books and CDs for new or experienced racers. Each book is packed with informative photos and illustrations. Part No.
Description
SSAC302 ...........Compact Disc, Open Wheel Rear Suspension Geometry SSAS203 ...........How To Build And Design Trailers SSAS217 ...........The New Racer’s Tax Guide SSAS225 ...........Dwarf Car Technology SSAS282 ...........Sprint Car Chassis Technology SSAS286 ...........Mini Sprint/Micro Midget Chassis Technology SSAS287 ...........Kart Chassis Set-up SSAS288 ...........Selection of Hoosier Dirt Racing Tires SSAS303 ...........How To Become A Winning Crew Chief
SSAS282
SSAS302
2010
177-192OW10.indd 181
SSAS303
181
11/12/09 11:50:43 AM
Rod End Seals
Firewall Grommets
Rod end seals keep dirt and water out of rod ends, insuring longer life and better per formance. Excellent for use on dirt cars.
3" diameter grommets may be fastened to firewall with rivets or bolts to provide leakproof passage for hoses and wires. Eliminate sharp edges which cause electrical shorts or fluid leakage.
Part No.
Description
SIC3750 ............3/8" Rod End SIC5001 ............1/2" Rod End SIC6250 ............5/8" Rod End SIC7500 ............3/4" Rod End
Torque Tube Seals Seals-It torque tube seals prevent hot grease from running out of torque tube and possibly burning driver. Part No.
Part No.
Description
SICGS1003-6............ -6AN Hose SICGS1003-8............ -8AN Hose SICGS1003-10.......... -10AN Hose SICGS1003-12.......... -12AN Hose SICGS1003-16.......... -16AN Hose SICGS1003-20.......... -20AN Hose SICGS1003-BL.......... Blank
Description
SIC4500 ............2.500" I.D. Torque Tube Seal, Gold SIC4562 ............2.562" I.D. Torque Tube Seal, Blue SIC4625* ...........2.625" I.D. Torque Tube Seal, Red SIC4750 ............2.750" I.D. Torque Tube Seal, Silver *Most Common.
Split Seal Firewall Grommets Use on permanent components or those that are not easily removed. Grommets are 3" dia. and may be riveted or bolted to firewall. Part No.
Sprint Air Horn Seal SICSEIT3001 Seal works regardless of vibration or variations in tube diameter. Prevents dirt from entering air box and includes aluminum base. Sold individually; four required for V8’s.
Gauge Isolators Use between gauge and dash or gauge panel to dampen vibration. Part No.
Torque Ball Housing Seals Available for aluminum “MPD” and steel “DMI” bellhousings, seals fit Chevrolet engines with 3.580" crank flange diameter using motor plates that are 3/8" thick with a thickness variation of +/- 1/64" and center holes with 6.0" +/- 1/64" diameter. Seals may fit other housings as well, but we recommend careful checking before installation. Both types are supplied with black anodized rings around the seal and hard coat anodized cups. Part No.
Description
SICTBS1A-07 .....Torque Ball Seal Assy. For MPD Style Housing SICTBS1C-07.....Replacement Cup Only For MPD Style Housing SICTBS1S-07 .....Replacement Seal Only For MPD Style Housing SICTBS2A-07 .....Torque Ball Seal Assy. For DMI Style Housing SICTBS2C-07.....Replacement Cup Only For DMI Style Housing SICTBS2S-07 .....Replacement Seal Only For DMI Style Housing
Description
SICSGS3-500............ 1/2" Hole, Split Grommet Seal SICSGS3-750............ 3/4" Hole, Split Grommet Seal SICSGS3-1000.......... 1" Hole, Split Grommet Seal SICSGS3-BL.............. No Hole, Split Grommet Seal
Description
SICDB206-225.......... 2-1/16" Gauge Isolator SICDB260-275.......... 2-5/8" Gauge Isolator
Camber Adjustment Kit SICCA-860-OR Redesigned original camber sleeve adjustment kit to allow the racer to change at the track in a matter of minutes. Kit lets the front axle lean to just the perfect angle, placing the front tires flat on the racetrack. Replacement Sleeves Part No.
Description
SICCA-860-S-0 ......... Gold 0° SICCA-860-S-.5 ........ Silver .5° SICCA-860-S-1.0 ...... Blue 1.0° SICCA-860-S-1.5 ...... Red 1.5°
Rod End Boots SICRERS3 Enclosed boots isolate rod ends from dirt, moisture and corrosion. Ideal for high misalignment applications. In sets of six, rod end boots fit 1/2", 5/8" and 3/4" SAE, male or female rod ends.
Jason Meyers
182
Photo: Dave Hill
2010
177-192OW10.indd 182
11/10/09 10:34:35 AM
The Diamondback
The Bandit
Ground breaking new helmet includes chin air ram ducts with contrasting vents and fire retardant lining. The Diamondback meets Snell SA2005 specifications and is offered in black, white or flat black with a clear Lexan shield.
The Bandit’s distinctive appearance and profile are complemented by ram ducts for air circulation. The Bandit has a Snell SA2005 rating and is stocked in white or black.
Size
White
Black
Flat Black
7 7-1/8 7-1/4 7-3/8 7-1/2 7-5/8 7-3/4 8
SIM1297001 SIM1297181 SIM1297141 SIM1297381 SIM1297121 SIM1297581 SIM1297341 SIM1298001
SIM1297002 SIM1297182 SIM1297142 SIM1297382 SIM1297122 SIM1297582 SIM1297342 SIM1298002
– SIM1297188 SIM1297148 SIM1297388 SIM1297128 SIM1297588 SIM1297348 –
The Speedway Vudo Simpson's lightest helmet ever, the fire retardant lined Speedway Vudo has the latest aerodynamic counter measures. Stocked in white only; meets Snell SA2005 specs. Includes padded bag, clear and smoke shield. Part No.
Size
SIM1607141......7-1/4 SIM1607381......7-3/8 SIM1607121......7-1/2 SIM1607581......7-5/8 SIM1607341......7-3/4
Size
White
Black
Small Medium Large X-Large XX-Large
SIM1200011 SIM1200021 SIM1200031 SIM1200041 SIM1200051
SIM1200012 SIM1200022 SIM1200032 SIM1200042 –
The Super Bandit Combines the style of the Bandit with adjustable intake vents and air ram ducts. The Super Bandit has a fire retardant liner and meets Snell SA2005 standards. Stocked in white or flat black. Size
White
Flat Black
7-1/8 7-1/4 7-3/8 7-1/2 7-5/8 7-3/4
SIM1217181 SIM1217141 SIM1217381 SIM1217121 SIM1217581 SIM1217341
SIM1217188 SIM1217148 SIM1217388 SIM1217128 SIM1217588 SIM1217348
The Speedway Shark Aerodynamic styling adds downforce to prevent helmet lift and buffeting. Helmet also has gill vents and a fire retardant liner. Meets Snell SA2005 specifications and is stocked in white only. Includes a padded bag, clear and smoke shield. Part No.
Size
Helmet Shields Model
SIM1707141......7-1/4 SIM1707381......7-3/8 SIM1707121......7-1/2 SIM1707581......7-5/8
The Speedway RX Speedway RX has a contoured eyeport that fits snugly around the eyes and nose, an aerodynamic shell, air ram ducts and a fire retardant liner. Meets Snell SA2005 specifications and is stocked in white or flat black. Size
White
Flat Black
7 7-1/8 7-1/4 7-3/8 7-1/2 7-5/8 7-3/4 8
SIM1517001 SIM1517181 SIM1517141 SIM1517381 SIM1517121 SIM1517581 SIM1517341 SIM1518001
SIM1517008 SIM1517188 SIM1517148 SIM1517388 SIM1517128 SIM1517588 SIM1517348 SIM1518008
Clear
Bandit/Super Bandit/Desperado/ Diamondback Voyager/Super Voyager Voyager SW/SidePro Shark/Speedway Vudo Super Shark/ Speedway Shark/ Invader/Valor RX/Speedway RX Outlaw
Smoke
Amber
Iridium Blue Blocker
Light Smoke
SIM89400A SIM89401A SIM89403A SIM89402 SIM89404A SIM88200A SIM88201A SIM88204A SIM88203
–
SIM88300A SIM88301A SIM88304A SIM88303 SIM88400A SIM88401A SIM88403A SIM88402
– –
SIM88600A SIM88601A SIM88603A SIM88602 SIM88604A SIM89200A SIM89201A SIM89204A SIM89203 SIM89600A SIM89601A – SIM89602
– –
To Ensure An Accurate Fit Carefully measure around head, above the ears. Refer to this sizing chart for your correct hat/helmet size (Except OTW Shorty Helmet). Helmet must fit properly for optimum performance; do not guess size. Helmet must be securely and snugly fastened before use. Helmet Sizing Chart (shown at 50%)
Replacement Pivot Kits Part No.
Description
SIM99001..........Pivot Kit - RX And Speedway RX SIM99002..........Pivot Kit - Bandits, Sharks, VDO, Valor, Diamond Back SIM99022..........Pivot Kit - Voyager And Street Bandit
Hat Size
6-5/8 to 6-3/4
6-7/8 to 7
7-1/8 to 7-1/4
7-3/8 to 7-1/2
7-5/8 to 7-3/4
7-7/8 to 8
Helmet Size
XS
SM
MD
LG
XL
XXL
2010
177-192OW10.indd 183
183
11/10/09 10:34:59 AM
Speedway Heatshield Driving Shoes NEW!
One-Piece Nomex Double Layer Driving Suits Vertical quilt, double-layer suits have patch pockets on pants and zippered breast pockets. Made of 6.5 oz. Nomex III Gabardine outer layer and an 8 oz. Nomex III Aramide fleece inner layer. Meet SFI 3-2A/5 specifications. Available in black, blue or red. Description
Black
Blue
Red
One-Piece Driving Suits Medium Nomex SIM0402211 SIM0404211 – Large Nomex SIM0402311 SIM0404311 SIM0403311 X-Large Nomex SIM0402411 SIM0404411 SIM0403411
Designed to defeat heat transfer from the pedals and floor board. Mid top design, Nomex shoes are flexible, comfortable and offer exceptional pedal sensitivity. Meets SFI 3.3/5 specifications. Offered in black only. Part No.
Size
Part No.
SIM23800BK ............ 8 SIM23850BK ............ 8-1/2 SIM23900BK ............ 9 SIM23950BK ............ 9-1/2 SIM23100BK ............ 10
Size
SIM23105BK ............ 10-1/2 SIM23110BK ............ 11 SIM23115BK ............ 11-1/2 SIM23120BK ............ 12 SIM23125BK ............ 12-1/2 SIM23130BK ............ 13
The Adrenaline Shoe One-Piece Double Layer Euro-Driving Suits Suits are made from special Sateen Nomex for a shiny appearance. Double layer, one-piece Nomex suits are box quilted and include expandable waistbands, epaulet/collar/belt piping, hi-rise collars, arm and lower back gussets and boot cuffs. Suits meet SFI 3-2A/5 specifications. Available in black, blue or red. Description
Medium Large X-Large
Black
Blue
Red
SIM0502221 SIM0504221 SIM0503221 SIM0502321 SIM0504321 SIM0503321 SIM0502421 SIM0504421 –
The Adrenaline combines exceptional pedal feel and superior comfort with satin suede toe, heel and lace guard reinforcements, fleece Nomex linings, non-slip Posi-grip soles and single Speedfit closures. Shoes meet SFI specifications. Size
Black
Blue
Red
8-1/2 9 9-1/2 10 10-1/2 11 11-1/2 12
SIMAD850BK SIMAD900BK SIMAD950BK SIMAD100BK SIMAD105BK SIMAD110BK SIMAD115BK SIMAD120BK
SIMAD850BL SIMAD900BL SIMAD950BL SIMAD100BL SIMAD105BL SIMAD110BL SIMAD115BL SIMAD120BL
SIMAD850RD SIMAD900RD SIMAD950RD SIMAD100RD SIMAD105RD SIMAD110RD SIMAD115RD SIMAD120RD
The Hightop Shoe Talon Grip Gloves Gloves have two layers of plush knitted Nomex® on top of hand and two-layer, calfskin-reinforced palm to grip steering wheel without bunching. Available in black, blue or red. Size
Black
Blue
Red
Small Medium Large X-Large
SIM21500SK SIM21500MK SIM21500LK SIM21500XK
SIM21500SB SIM21500MB SIM21500LB SIM21500XB
SIM21500SR SIM21500MR SIM21500LR SIM21500XR
Sportsman Grip Gloves Sportsman gloves have one layer of plush knitted Nomex® and a full calfskin palm. Meet SFI 3.3/1 specifications. Available in black, blue or red. Size
Black
Blue
Red
Small Medium Large X-Large
SIM22500SK SIM22500MK SIM22500LK SIM22500XK
SIM22500SB SIM22500MB SIM22500LB SIM22500XB
SIM22500SR SIM22500MR SIM22500LR SIM22500XR
Suede leather Hightop has Velcro closure, bot tom laces, Nomex® fleece-lined interior, and polyurethane type-M sole with athletic-style inner sole. Meets SFI 3.3/5 specifications. Size
Black
Blue
Red
7.5 8 8-1/2 9 9-1/2 10 10-1/2 11 11-1/2 12 13 14
SIM28750BK SIM28800BK SIM28850BK SIM28900BK SIM28950BK SIM28100BK SIM28105BK SIM28110BK SIM28115BK SIM28120BK SIM28130BK SIM28140BK
SIM28750BL SIM28800BL SIM28850BL SIM28900BL SIM28950BL SIM28100BL SIM28105BL SIM28110BL SIM28115BL SIM28120BL SIM28130BL SIM28140BL
– – SIM28850RD SIM28900RD SIM28950RD SIM28100RD SIM28105RD SIM28110RD SIM28115RD SIM28120RD SIM28130RD –
Sprint Car Driving Shoes Shoes are high top with bottom lace cover, two top closures and smooth hot-P leather toe, lace and heel guard reinforcements. Black only. Meets SFI specs. Part No.
Posi-Grip Gloves Two layers of knitted Nomex® on top of hand, one layer in the palm, plus leather reinforcing. Meets SFI 3.3/5 specifications. Available in black, blue or red.
Size
SIMSP900BK ..... 9 SIMSP950BK ..... 9-1/2 SIMSP100BK ..... 10 SIMSP105BK ..... 10-1/2
Part No.
Size
SIMSP110BK ..... 11 SIMSP115BK ..... 11-1/2 SIMSP120BK ..... 12
CarbonX Socks SIM23026C
Size
Black
Blue
Red
One size fits all.
Small Medium Large X-Large
SIM21100SK SIM21100MK SIM21100LK SIM21100XK
SIM21100SB SIM21100MB SIM21100LB SIM21100XB
SIM21100SR SIM21100MR SIM21100LR SIM21100XR
Nomex Socks Description
6-8
8-10
9-11
10-14
Nomex Socks SIM23025S SIM23025M SIM23025L SIM23025X
184
2010
177-192OW10.indd 184
11/10/09 10:35:19 AM
Nomex® Head Socks
Sprint Car/HANS 5-Point Harness SIM29075HK
Natural color, knitted from extra-plush Nomex®. Critical areas are double-layered. Available in black or white. Description
Black
Single Eyeport Headsock SIM23000BK Dual Eyeport Headsock SIM23003BK
Specifically designed for use with HANS device, Sprint car harness has no right side adjuster and is a pull down type. Short sew pattern. Offered in black only.
White
SIM23000W SIM23003W
CamLock Driver Restraint Systems
Knitted Nomex Underwear Description
Small
Medium
Large
Short Sleeve Top – SIM20100M SIM20100L Full Length Bottoms SIM20101S SIM20101M SIM20101L Long Sleeve Turtleneck Top – SIM20500M SIM20500L Form-Fitting Bottoms – SIM20501M SIM20501L
X-Large
SIM20100XL SIM20101XL SIM20500X SIM20501X
Talladega Crew Shirt Attractive, comfortable crew shirts with contrasting fabric, piping and breathable mesh side panels are made from 65% polyester/35% cotton and embroidered with the Simpson logo. Color choices are blue, gray or red. Size
Blue
Gray
Red
Medium Large X-Large
SIM39012MB SIM39012LB SIM39012XB
SIM39012MG SIM39012LG SIM39012XG
SIM39012MR SIM39012LR SIM39012XR
A smooth, circular buckle machined from billet aluminum is for quick connect and disconnect. A quick snap and hardened steel tumblers lock the stainless steel belt and harness tabs in place. Twist to release. Systems are 5-point and include lap, shoulder and submarine belts. Available in black and red. Description
Black
Red
52" Individual, Pull Down, Wrap Around
SIM29112BK
SIM29112RD
Latch F/X Driver Restraint Systems Compact, lightweight five-point F/X systems prevent accidental release. Sets include lap, shoulder and submarine belts. Most systems are also available with sternum protector by adding “S” prior to the color suffix. Available in black, blue and red. Description
Crew Shoes Lightweight Crew Shoe has Simpson’s exclusive, all weather, all-condition sole, a suede reinforced outer, Super Wick liner, and breathable 1000 Denier nylon shell to repel liquids and resist tearing or abrasions. Offered in black only. Part No.
Size
SIM56650BK ............ 6-1/2 SIM56700BK ............ 7 SIM56750BK ............ 7-1/2 SIM56800BK ............ 8 SIM56850BK ............ 8-1/2 SIM56900BK ............ 9 SIM56950BK ............ 9-1/2
Part No.
Size
SIM56100BK ............ 10 SIM56105BK ............ 10-1/2 SIM56110BK ............ 11 SIM56115BK ............ 11-1/2 SIM56120BK ............ 12 SIM56125BK ............ 12-1/2 SIM56130BK ............ 13
Deluxe Helmet Bag SIM23510
Black
Blue
Red
62" Wrap Around, Pull Down SIM29072BK SIM29072BL SIM29072RD 62" Individual, Pull Down, Bolt-In SIM29073BK SIM29073BL SIM29073RD 62" V-Harness, Pull Down, Bolt-In SIM29074BK SIM29074BL SIM29074RD
Standard Latch And Link Driver Restraint Systems Standard five-point latch and link restraint systems use drop-forged steel, cadmium plated hardware, 3" wide military spec. webbing and pull down adjusters. Sets include lap, shoulder and submarine belts. Most systems are also available with sternum protector by adding “S” prior to the color suffix. Available in black, blue and red. Description
Black
Blue
Red
Redesigned bag has a plush interior and ample room for helmet and HANS device. Bag is 14” L. x 10” W. x 10” D.
55" Individual, Pull Down, Wrap Around SIM29064BK SIM29064BL SIM29064RD
Dual Shield Bag SIM23900
Sternum Protector Option
Made with soft micro fibers and a special separation, bag stores two helmet shields to protect from scratches. Machine washable.
Holds harness together under impact. Made with aircraft quality hardware. Available in red or black for CamLock or standard latch and link harnesses. To order add the letter “S” before the color suffix in the harness part number.
Super Duffle Bag SIM23400 Durable nylon duffle bag is roomy enough to hold helmet and other race gear. Red/black bag is 24" L. x 11" W. x 12" D.
Child Safety Car Seat SIM92000 The seat that grows with the child has a 5-point harness to secure a child weighing 20 to 40 pounds. It may be transformed into a booster seat for a child weighing 30-100 pounds. An easy pull adjustment secures child and the Comfort Clips position shoulder belt away from neck.
Nomex Harness Pads Pads attach to harnesses or belts in seconds with Velcro and provide extra comfort when cinching belts. Sold in pairs and available in black, blue or red. Description
Black
Blue
Red
Nomex Harness Pads
SIM23020BK
SIM23020BL
SIM23020RD
2010
177-192OW10.indd 185
185
11/10/09 10:35:35 AM
Sprint Car Window Net
Helmet Restraints
Sprint Car Window Net has 1" webbing and quick release buckle. Available in black, blue or red.
Fatigue-reducing helmet strap has quick attachment and adjustment with durable steel hardware. Install on helmet D-ring. Available in black or red.
Description
Black
Blue
Red
Sprint Window Net
SIM36005BK
SIM36005BL
SIM36005RD
Champ Car Window Net
Description
Black
Red
Helmet Restraint
SIM36007BK
SIM36007RD
Arm Restraints
Champ car window Net has 1" webbing and quickrelease buckle. Available in black, blue or red. Slightly larger than Sprint Net above. Description
Black
Blue
Red
Champ Car Window Net
SIM36006BK
SIM36006BL
SIM36006RD
Padded Neck Supports
A must for open cockpit race cars, restraints have padded arm bands with steel hardware and allow easy entry and exit. Available in black, blue or red. Description
Black
Blue
Red
Individual Straps Y-Straps
SIM36000BK SIM36001BK
SIM36000BL SIM36001BL
SIM36000RD SIM36001RD
Roll Bar Padding SIM36008S
Made of high density foam and covered with durable Nomex III, Supports reduce neck fatigue and are recommended for all types of racing. One size fits all with adjustable Velcro fasteners. Available in black, blue or red.
SFI-approved, padding meets SFI 45.1 specifications and will not drip or melt when exposed to fire. Sold in 3' lengths. Padding fits 1-5/8"-2" dia. tubing
Description
Black
Blue
Red
Padded Neck Support
SIM23022BK
SIM23022BL
SIM23022RD
NEW VENDOR
NEW VENDOR
2-1/2" I.D. Coil-Over Barrel Springs
Detail of Schroeder Torsion Bar
SHR130HW0950
Tubular Torsion Bars Schroeder uses only aircraft quality high alloy steel to manufacture the finest torsion bar possible, and machines their torsion bars with state of the art CNC equipment. Only Schroeder torsion bars are machined in one continuous pass from end to end in order to prevent irregularities. Then they are polished, heat treated to exact specifications, then polished again to assure no surface imperfections exist which could cause a stress point or crack to originate. Bars are then coated with a protective film and shipped in plastic screw-lock tubes for protection and easy identification. Part No.
Manufactured from exclusive H5S.TW material, Swift coil-over springs are light, with consistent rate. Barrel design eliminates rate inconsistency due to bowing, and issues with the spring rubbing against the shock body. Springs have a maximum diameter of 4", measured at the center coil. Rate
12" Tall Part No.
14" Tall Part No.
100 125 150 175 185 200 225 250 275 300 325 350
– – – SWI120-250-175B SWI120-250-185B SWI120-250-200B SWI120-250-225B SWI120-250-250B SWI120-250-275B SWI120-250-300B SWI120-250-325B SWI120-250-350B
SWI140-250-100B SWI140-250-125B SWI140-250-150B SWI140-250-175B SWI140-250-185B SWI140-250-200B SWI140-250-225B SWI140-250-250B SWI140-250-275B SWI140-250-300B – –
Description
SHR130HW0950 ............. 30 in. x 1-1/8 in. Tubular Torsion Bar SHR130HW0975 ............. 30 in. x 1-1/8 in. Tubular Torsion Bar SHR130HW1000 ............. 30 in. x 1-1/8 in. Tubular Torsion Bar SHR130HW1025 ............. 30 in. x 1-1/8 in. Tubular Torsion Bar SHR130HW1050 ............. 30 in. x 1-1/8 in. Tubular Torsion Bar
Cainen Reimann
186
Photo: John Berglund
2010
177-192OW10.indd 186
11/10/09 10:36:00 AM
Nomex® Underwear
“One” and “One Plus” Driving Suits
Part No.
Size
Tops SCO00176MBI2M.......Medium SCO00176MBI3L........Large SCO00176MBI4XL......X-Large Bottoms SCO00176PBI2M .......Medium SCO00176PBI3L.........Large Balaclavas (Head Socks) Two layer Nomex III material.
One-piece, single layer Nomex driving suits are priced for the sportsman racer’s budget. Suits meet SFI 3.2A/1 specifications and feature box stitching, boot cut cuff and contrasting piping. Colors available are: “One” = blue, black or red, “One Plus” = black/gray with red piping or blue/gray with yellow piping.
Part No
Description
SCO00140B .............. Open Face Style, White SCO00141B .............. Double Eye Hole Style, White
Race Driving Shoes
One Driving Suit Size
Blue
Medium Large X-Large XX-Large
SCO001052AZ2M SCO001052AZ3L SCO001052AZ4XL –
Black
Red
SCO001052NR2M SCO001052RS2M SCO001052NR3L SCO001052RS3L SCO001052NR4XL SCO001052RS4XL SCO001052NR5XXL –
One Plus Driving Suit Size
Blue/Gray
Black/Gray
Medium Large X-Large XX-Large
SCO001053AGR2M SCO001053AGR3L SCO001053AGR4XL SCO001053AGR5XXL
SCO001053NRGR2M SCO001053NRGR3L SCO001053NRGR4XL SCO001053NRGR5XXL
Shoe's wider toe box, additional comfort cell in the ball of the foot and extra cushioning in the sole reduce shock and vibrations for more comfort. Blue, black or red. Size
Blue
Black
Red
9-1/2 10 10-1/2 11 11-1/2
– SCO00127010A SCO00127105A SCO00127011A –
SCO00127095N SCO00127010N SCO00127105N SCO00127011N SCO00127115N
– SCO00127010R SCO00127105R – SCO00127115R
Neck Supports
Profi Gloves Profi gloves feature suede lining on the palm, reinforcing and padding on both the index finger and palm. Black or blue. Size
Black
Blue
Medium SCO00139210N – Large SCO00139211N SCO00139211A X-Large SCO00139212N –
Deluxe Porting Kit STA260001 Kit includes shaped cartridge rolls for heads and intake manifolds, grinding tools for porting intake runners and heads, cross buffs for a satin finish in ported areas, and a combination of cartridge rolls and rotary stones for use in small areas. Packaged in a resealable, reusable box.
Multi-density padded supports have an anatomical rear support for additional protection and comfort. Blue, black or red. Description
Blue
Black
Red
Neck Support
SCO00163A
SCO00163N
SCO00163R
Basic Porting Kit STA260012 Great for smaller jobs, or as a refill for the Deluxe Kit. Kit does not include rotary stones and is packaged in a resealable poly bag.
Cartridge Roll Kit STA260006 Assortment of straight, full-tapered and half-tapered cartridge rolls in coarse, medium and fine grades for porting of intake manifolds, heads and exhaust manifolds. Kit is packaged in a resealable box.
2010
177-192OW10.indd 187
187
11/10/09 10:36:19 AM
NEW VENDOR
File-Fit Plasma Moly Piston Ring Sets By Application Sets have high strength ductile iron top rings with Plasma Moly facing for instant seating and superior sealing. Taper face iron second rings deliver excellent oil control, and the stainless steel SS-50 oil ring package is among the industry’s best. Sets with low (15-18 lbs.) or light (5-10 lbs.) tension oil rings are for race-only engines and reduce internal friction for increased horsepower and torque. Instructions for recommended file-fitting methods included. Please specify oversize (.005", .025", .035", .045", .065") when ordering. Engine
Std. Bore
Top Ring
2nd. Ring
Oil Ring
Sizes Available
Part No.
Chevy 1/16" 1/16" 3/16" .005", .025", .035", .045", .065" SEAR9771 1/16" 1/16" 3/16" .005", .025", .035", .045", .065" SEAR9401* .043" .043" 3.0mm .035", .065" SEAR20100† 1/16" 1/16" 3/16" .005", .025", .035", .045", .065" SEAR10248 400 4.125" 1/16" 1/16" 3/16" .005", .025", .035", .045", .065" SEAR9346* *Includes low tension oil ring package (15-18 lbs.) for racing only †Includes light tension oil ring package (5-10 lbs.) for racing engines with crankcase evacuation system. 350
4.000"
Standard Gap “Drop-In” Plasma Moly Piston Ring Sets By Application Speed-Pro’s Standard Gap “Drop-In” Plasma Moly Piston Ring Sets may be installed right out-of-the-box without the hassles of file-fitting. Sets include Plasma Moly-faced, ductile iron top rings, taper face iron second rings and standard tension, stainless steel SS-50 oil rings. Please specify size/oversize (Std., .020", .030", .040", .060") when ordering. Engine
Std. Bore
Top Ring
2nd. Ring
Oil Ring
Sizes Available
Part No.
1/16" 1/16" 1/16"
1/16" 1/16" 1/16"
3/16" 1/8" 3/16"
Std., .020", .030", .040", .060" Std., .030", .060" Std., .030", .040", .060"
SEAR9902 SEAR9968 SEAR10375
Chevy 350
4.000"
400
4.125"
Competition Series Engine Bearings
Camshaft and Lifter Prelube SEA55-400
Bearings offer improved dimensional accuracy, reduced overplate thickness and resistance to fatigue. Please specify sizing (standard, .001, .010", .020", .030" or 1x) when ordering.
Assembly lube is formulated for excellent break-in protection and will quickly dissolve in oil after engine has warmed. 4 oz. bottle.
Application
Rod Bearings
Main Bearings
Cam Bearings
Small Block 350 Small Block 400
SEA8-7100CH SEA8-7100CH
SEA139M SEA140M
SEA1235M SEA1235M
Chevy
Duroshield Coated Competition Series Engine Bearings H-14 super duty alloy (CH) bearings use Duroshield coating, an enhanced molybdenum disulfide polymer based treatment with high lubricity and low friction to reduce engine failure under severe operating conditions. Please specify sizing (standard, .001, .010", .020", .030" or 1x) when ordering. Application
Chevy Small Block 305, 350 Small Block 400 Small Block (Honda Rod Sizing)
Rod Bearings
Main Bearings
SEAC87100CH SEAC87100CH SEAC87195CH
SEAC139M SEAC140M –
Piston Ring Filer Fasten filer to a bench or clamp in a vise. Hold ring parallel to the grinding wheel and turn the crank for quick, accurate end gap sizing. Replacement filer blade available. Part No.
Description
SEAMT135................ Piston Ring Filer SEAMT135CR ........... Replacement Filer Blade
188
Green Plastigauge SEASPG1-12 The quick, easy way to determine bearing clearances of .001"-.003". Twelve strips per package.
Complete Performance Engine Overhaul Gasket Sets Performance gaskets sets include only premium quality gaskets designed to endure the rigors of racing applications. Offered for small block Chevy 265-350 and 400 engines, sets are complete with gaskets for oil pan, timing cover, fuel pump, cylinder heads, exhaust manifolds, intake manifold and valve covers, and seals for rear main and timing cover. Part No.
Description
SEA260-1000 ........... 1955-85 SB Chevy 265-350 SEA260-1016 ........... 1970-80 SB Chevy 400
2010
177-192OW10.indd 188
11/10/09 10:36:29 AM
Locking Header Bolts Locking header bolts may be used over and over. Also available in stainless steel for limited applications. Part No.
Description
SGE8911 .................. SB Chevy 265-400, 3/8"-16 x 3/4" DHH, 12 Pcs. SGE8911A ................ SB Chevy 265-400, 3/8"-16 x 1" DHH, 12 Pcs. SGE8931 .................. SB Chevy 265-400, 3/8"-16 x 1" 12 Pt., 12 Pcs. SGE8951 .................. SB Chevy 265-400, 3/8"-16 x 1" 6 Pt., 12 Pcs., Stainless Note: “DHH” signifies double hex head.
NEW VENDOR
Stainless Steel Oil Restrictors STF7228 Restrictors have inverted hex for flush installation in rear of block. They will restrict lifter/rocker arm oil passage to a .060" diameter hole, cutting oil volume by more than 70% and diverting it to the main and rod bearings. Fits small block Chevy. Note: Not for use with hydraulic lifters.
Competition Ultra-Shift Light Digital Tachometers
2-5/8" Dia. Competition Gauges
Tachs have shift lights and recall peak RPM. Shift lights may be programmed with two buttons (ten RPM increments) and require no plug-in modules or pills. Choose 1-5/8" dia. x 5" long tube or 2-1/16" gauge version with amber, red or blue LED lights.
Large, 2-5/8" diameter gauges have incandescent lighting and may be read at a glance. Each gauge also includes red and green light tinting boots.
Description
1-5/8" x 5" Long Tube Style, Gray 2-1/16" Gauge, Black Bezel 2-1/16" Gauge, Silver Bezel
Amber Part No.
STW114949
Red Part No.
Blue Part No.
STW114906 STW114918 STW114919 STW114929 STW114930 STW114931 STW114949 STW114950 STW114951
2-1/16" Dia. Competition Gauges Compact, easily read gauges have bright red pointers with black, silver or white dial faces. Incandescent light, socket, and red and green light tinting boots are included. Description
Black Part No.
Silver Part No.
White Part No.
Mechanical Gauges Fuel Pressure, 0-30 PSI – – STW114384† Fuel Pressure, 0-60 PSI – – STW114508† Oil Pressure, 0-100 PSI STW114518 STW114519 STW114520 Oil Pressure, 0-150 PSI STW114388 – STW114390 Water Temperature, STW114554 STW114555 – 100-260°F, 6' Tubing † Mechanical Fuel Pressure Gauges Must Be Installed Outside Of The Driver's Compartment.
Black Part No.
Description
White Part No.
Mechanical Gauges Fuel Pressure, 0-15 PSI STW114503† STW114504† STW114505† Oil Pressure, 0-100 PSI STW114521 STW114522 STW114523 Oil Pressure, 0-150 PSI – STW114392 STW114393 Water Temp., 100-260°F, 6' Tubing STW114557 STW114558 STW114559 Water Temp., 100-260°F, 8' Tubing STW114397 STW114398 STW114399 Water Temp., 100-260°F, 12' Tubing – – – † Mechanical Fuel Pressure Gauges Must Be Installed Outside Of The Driver's Compartment.
Gauge Accessories Part No.
Description
STW114910
STW114848
STW114848.......Temp. Adapter, Water Or Oil, 1/8" NPT To 1/2" NPT STW114858.......Temp. Adapter, Water Or Oil, 5/8"-18 To 1/4" NPT STW114873.......Temp. Adapter, Water Or Oil Temp., 1/8" NPT STW114874.......Pressure Sender, 15 PSI, 1/8" NPT, Fuel And Oil STW114875.......Pressure Sender, 100 PSI, 1/8" NPT, Fuel And Oil STW114884.......Temp. Switch, 200° F., 1/4" NPT, Spade Terminal STW114886.......Temp. Switch, 225° F., 1/4" NPT, Screw Terminal STW114889.......Pressure Switch, 15 PSI, 1/8" NPT STW114910.......Lamp Boot Kit, Red
2010
177-192OW10.indd 189
Silver Part No.
189
11/10/09 10:36:39 AM
NEW VENDOR SuperTrappâ&#x20AC;&#x2122;s exhaust outlet is actually a series of precise gaps between diffuser discs. As exhaust travels from the center of the diffuser disc toward the outside, it moves into a larger area, creating a pressure drop; exhaust gases are drawn out or scavenged. Adding discs increases the size of the outlet, thereby reducing back pressure, increasing top end power, racing sound level, and leaning out carburetion. By adding or subtracting discs, the power band can be quickly and easily adjusted.
Aluminum Quick Release Steering Wheel Hub SWE801-70007 Aluminum quick release, splined shaft steering wheel hub is designed specifically for sprint car chassis fitted with KSE power steering.
Steering Wheels
Model 549 Short S/C Standard SPR549-3514
Flat style aluminum steering wheels. Part No.
Description
Model 549 Long S/C Standard
Standard - Coated Wheels SWE601-70131 ........ 13" Flat Aluminum Wheel SWE601-70151 ........ 15" Flat Aluminum Wheel SWE601-70171 ........ 17" Flat Aluminum Wheel Standard - Uncoated Wheel SWE611-70151 ........ 15" Flat Aluminum Wheel
Mufflers are 18.5" long with a 5" diameter and a choice of 2.5", 3", and 3.5" inlets and 2.5" or 3" cores.
Flat Steering Wheel Pad SWE601-70100
Muffler has 3.5" dia. inlet, a 3" core and is 14" long. Weighs 6.5 lbs.
Part No.
SWE601-70131
Description
SPR549-2519 ........... Model 549 Long Muffler, 2.5" Inlet, 2.5" Core SPR549-3019 ........... Model 549 Long Muffler, 3" Inlet, 3" Core SPR549-3519 ........... Model 549 Long Muffler, 3.5" Inlet, 3" Core
Model 544 Disc Only Disc-Only models depend only upon the discs for noise reduction and are ideal for limited space. The 544 models use 5" diffuser discs. Part No.
Description
SPR544-2503 ........... Fits 2-1/2" Diameter Pipe SPR544-3003 ........... Fits 3" Diameter Pipe SPR544-3503 ........... Fits 3-1/2" Diameter Pipe Note: Disc only and glass pack models have almost identical flow characteristics. Noise level is a primary concern when choosing between the glass pack and disc only mufflers.
Wing Valve NEW! SWE306-10100 Manufactured from forged aluminum, twoway control valve is compact and lightweight. Valve includes integral mounting bosses and is sold complete with fittings.
Wing Cylinder SWE306-10200 NEW!
5" Diffuser Disc Packs Add discs to decrease back pressure, increase top end performance... and noise level. Remove discs to lower noise level, with an increase in bottom end power. Part No.
Description
Specifically designed to endure the rigors of sprint car racing. Rigid, aluminum bodied hydraulic wing cylinder is fitted with a steel piston and pushrod assembly, while heavy duty bushings and seals eliminate any possibility of leakage.
SPR504-6506 ........... 6-Pack SPR504-6512 ........... 12-Pack
Power Steering Pump SWE306-10300 NEW! All-new power steering pump, designed exclusively for sprint car applications, features a fully CNC-machined billet 7075 aluminum housing that is fitted with precision ground, high grade steel shafts and gears for optimum pressure. Unit is sold complete with necessary fasteners and spacers.
Power Steering Fluid SWE301-30090 Sold by the quart.
Mike Baker
190
Photo: John Berglund
2010
177-192OW10.indd 190
11/10/09 10:36:49 AM
Chevy Adjustable Pressure Oil Pump SYS234-900775-1 Small block Chevy cast oil pump is adjustable from 75-125 PSI. Pump is pre-set at 80 PSI and includes unique oil bypass with anti-aeration screen for maximum efficiency. Pump accepts stock big block Chevy pickup.
Billet Remote Mounts Chassis tube remote mounts clamp to 1-1/4" or 1-3/8" chassis tubes, while the 2-bolt flat mount is for use on firewalls and other flat surfaces. All fittings are sealed with high temperature O-rings to eliminate thread sealants or tape that can clog oil systems. A 1" diameter -12AN threaded filter inlet nipple accepts a System 1 screw-on oil filter. -12AN fittings are included. Part No.
Description
SYS220-90002-12.... Fits 1-1/4" Chassis Tube SYS220-90003-12.... Fits 1-3/8" Chassis Tube SYS221-90004-12.... Flat Mount, Bolt-On
Oil Filters Two-piece ribbed aluminum filter housing contains a reusable, stainless steel mesh screen element sealed with double O-rings. Filter has a 1" diameter -12 threaded inlet and is supplied with two adapters; a 3/4"-16 to fit Ford or Chrysler and a 13/16"-16 for Chevrolet. A built in high flow bypass keeps maximum efficiency to 5 microns before activation. Independent tests have shown the System 1 filter to be six times less restrictive than paper filters. Part No.
Description
SYS209-312361 ....... Short Oil Filter, 3-7/8" Tall x 4-1/2" Dia. SYS209-512561 ....... Tall Oil Filter, 5-7/8" Tall x 4-1/2" Dia. SYS210-006 ............. HP6 Replacement, 1-1/2" -12 Threads Replacement Components SYS205-0100 ........... Spin-On Oil Filter O-Ring Kit SYS208-100360 ....... Replacement Short, 3-7/8" Element SYS208-100560 ....... Replacement Tall, 5-7/8" Element SYS216-0113 ........... 13/16" Reducer
Billet In-Line Fuel Filters High-flow, high-capacity in-line filters use pleated stainless mesh elements of the same design as System 1 oil filters, only with 30 micron configuration. Ends are machined for -6AN through -10AN fittings. Part No.
Description
SYS200-201406 ....... 2-1/4" Dia. x 4" Length, -6 Ends SYS200-201408 ....... 2-1/4" Dia. x 4" Length, -8 Ends SYS202-202408 ....... 2" Dia. x 9" Length, -8 Ends SYS202-202410 ....... 2" Dia. x 9" Length, -10 Ends
Shaft Roller Rocker Arm Systems
SportComp Shaft Roller Rocker Arms
Extruded 2024 aluminum rocker arms are CNC-machined, with intricate oil galleries to direct oil from the pushrod to the shaft bearings and onto the roller tip. Adjuster screws are 7/16" and broached for a 3/16" socket to eliminate twisted Allen wrenches. Deep, case hardened 8620 steel shafts are tempered for strength. Optional .040" spring oiler holes spray directly onto the valve springs for extended spring life. Specify engine, cylinder head type, rocker arm ratio and offsets (if applicable) when ordering. Replacement Components
High quality, affordable sets reduce valve train weight and valve lash adjustments while increasing RPM potential. System eliminates stud girdles for better head bolt accessibility. The .220" offset rockers for small block Chevys fit most aftermarket aluminum cylinder heads with 40/60 spacing requiring offset rocker arms. Sets of 16 include all installation hardware.
Part No.
Description
TDM03150 ........Rocker Arm Adjuster, 7/16"-20 x 1.130" With Shoulder, 5/16" Cup TDM03210 ........Rocker Arm Jam Nut, 12-Pt., 7/16"-20 Thread TDM05051 ........Hold Down Stud, 5/16"-18/24 x 1.890" With Starter TDM05120 ........Hold Down Nut, 12-Pt., 5/16" TDM05210 ........Rocker Arm Stand Bolt 7/16"-14 x 1" TDM05230 ........Rocker Arm Stand Bolt 7/16"-14 x 1", Low Profile Head TDM05232 ........Rocker Arm Stand Bolt 7/16"-14 x 1-1/4", Low Profile Head TDM05350 ........SB Chevy Stand Shim, .060" TDM05360 ........SB Chevy Stand Shim, .030" TDM05400 ........SB Chevy Stand Shim Kit, Eight Of Each: .030" And .060"
Part No.
Description
TDM10000-150/150 ......... SB Chevy, 1.5/1.5 Ratio TDM10000-160/150 ......... SB Chevy, 1.6/1.5 Ratio TDM10000-160/160 ......... SB Chevy, 1.6/1.6 Ratio TDM10001-150/150 ......... SB Chevy, .220" Offset, 1.5/1.5 Ratio TDM10001-160/150 ......... SB Chevy, .220" Offset, 1.6/1.5 Ratio TDM10001-160/160 ......... SB Chevy, .220" Offset, 1.6/1.6 Ratio
Deluxe Pinion Depth Checker TDM11001 Set up rear ends quickly and correctly. Fixture sits in place of differential carrier to easily check pinion depth. Includes adapters for most popular domestic rear ends, Ford 8.8"/9", Chrysler 8-3/4", Dana 60 and GM 10/12-Bolt.
2010
177-192OW10.indd 191
191
11/10/09 10:37:12 AM
Standard Tire Gauges
Smart Temp Memory Pyrometer TAN21320
Standard 2" dia. Gauges include swivel ended, flexible hoses, air release buttons and shockproof bumpers. Part No.
State-of-the-art memory pyrometer can gather and store up to ten sets of tire temperatures. Unit accommodates up to three temperatures per wheel with temperature averaging. Auto lock freezes temperature readings. A detachable probe and carrying case are included.
Description
TAN20060 .........0-60 PSI Tire Gauge
Glow-In-The-Dark Tire Gauges Great for use in dark pit areas, 2-1/2" diameter gauges include swivel ended, flexible hoses, air release buttons and shockproof bumpers. Part No.
Staggerite Precision Tire Caliper TAN22120 Easily and correctly measures stagger. Roller contact prevents unwanted bind on hot, sticky tires. Frictionless slider makes Staggerite the easiest, most accurate tool available. Reads in 1/10" increments.
Description
TAN20315 .........0-15 PSI Tire Gauge TAN20330 .........0-30 PSI Tire Gauge TAN20360 .........0-60 PSI Tire Gauge
Liquid-Filled Tire Gauges Liquid-filled, 2-1/2" gauges are highly accurate, even when used to check tires on a car while the engine is running. Features include swivel ended, flexible hoses, air release buttons, and shockproof bumpers. Part No.
Toe Plate Kit TAN56200 One person can quickly and accurately set toe-in with this kit. Includes two aluminum toe plates and two tape measures.
Description
Plumb Bob Kit TAN56300
TAN20215 .........0-15 PSI Tire Gauge TAN20230 .........0-30 PSI Tire Gauge TAN20260 .........0-60 PSI Tire Gauge
The inexpensive, effective method of squaring a race car. Kit includes two bobs and 16' of string.
Digital Readout Telltale Tachs The TEL TAC II has LCD digital readout and â&#x20AC;&#x153;telltaleâ&#x20AC;? memory. Compatible with most engines and ignitions, including magnetos and battery powered systems, the tach turns on automatically when the engine is started. Reads RPM in hundreds, from 500 RPM to over 12,000 RPM on V-8 engines, and to 15,000 RPM on smaller engines. After engine is shut off, the highest RPM attained is shown for 30 minutes. Oval Track Pro digital tachometer displays the highest overall RPM, the four lowest RPM and the four highest RPM from two laps. Compact, 3-1/8" x 3-1/8" units are powered by a 9 volt alkaline battery which will last for hundreds of hours. Will not work with odd-fire V-6, V-4 with Vertex internal coil magneto, or 4-cylinder with EFI. Part No.
Description
TELTACH ............TEL TAC II Digital Tachometer TELOTP..............Oval Track Pro Digital Tachometer TEL1001 ............Harness-Needed For Multi-Car Use Or As Replacement
Ryan Kirkendall
192
TELOTP
Photo: Doug Swift
Louie Carufel
Photo: Doug Swift
2010
177-192OW10.indd 192
11/12/09 2:35:02 PM
8mm Pro Universal Wire Sets Features Include: • 8mm wire has 100% pure silicone insulation, fiberglass reinforced jacket • Double spring locking spark plug terminals firmly grip plugs • Resistor core has 40% less resistance (more fire power) than most resistor conductors • TCW (Tinned Copper Weld) wire core is for racing applications where RFI interference is not a concern Description
Cyl.
TCW Wire Conductor Red
Black
Blue
90° Plug Boots 8 TAY70050 TAY70250 TAY70650 Vertex Style 90° Plug Boots* 8 – – TAY70660 *Vertex style sets have extra long leads for use with OAC/OXC magnetos. Note: TCW wire sets are NOT designed for use with HEI or MSD ignition systems.
Black
Resistor Core Red
Blue
TAY70051 –
TAY70251 –
TAY70651 –
8mm Spiro-Pro Universal Wire Sets Features Include: • Up to 10 times less resistance than standard resistor core wire • A must for electronic ignitions, on-board computers and pit radios • 100% silicone inner and outer jackets provide heat protection up to 600°F • Taylor Pro boots feature low profile silicone boots with grips • Double spring locking spark plug terminals Description
Cyl.
Grey
Black
Purple
Red
Yellow
Blue
Hot Orange
Hot Lime
90° Boots
8
TAY53851
TAY73051
TAY73151
TAY73251
TAY73451
TAY73651
TAY78351
TAY78551
8mm Spiro-Pro Custom Race-Fit Wire Sets Features Include: • Up to 10 times less resistance than standard resistor core wire • A must for electronic ignitions, on board computers and pit radios • 100% silicone inner and outer jackets provide heat protection up to 600°F • Taylor Pro boots feature low profile silicone boots with grips • Double spring locking spark plug terminals • TCW (Tinned Copper Weld) wire core is for racing applications where RFI interference is not a concern Application
Distributor Type
Plug Boot
TCW Wire Core Red
Black
Spiro-Pro Wire Red
Blue
SB Chevy, Over Valve Cover SB Chevy, Under Headers
HEI HEI
90° 90°
TAY76238 TAY76240
TAY76028 TAY76030
TAY76228 TAY76230
TAY76628 TAY76630
Note: TCW wire sets are NOT designed for use with HEI or MSD ignition systems.
Thundervolt 8.2mm Universal Wire Sets Features Include: • Wire measures just 50 ohms per foot of resistance • Ferrite, spiral-wound copper/nickel alloy core • Three-layer Zimplex silicone outer jacket • Tightly woven heat treated fiberglass braid Description
Cyl.
Black
Red
Blue
90° Plug Boots
8
TAY83051
TAY83251
TAY83651
“409” Pro Race Universal Wire Features Include: • 3 layers of silicone • .409" (10.4mm) diameter • 600°F of heat protection • No extra sleeving required • Sleeving is extruded directly over 8mm wire • Also available in Spiro-Wound Conductor for compatibility with multiple-spark ignitions, etc. Description
Cyl.
Red
Spiro-Wound Conductor Blue
Black
90° Plug Boots 8 TAY79251 TAY79651 TAY79051 Note: TCW wire sets are NOT designed for use with HEI or MSD ignition systems.
2010
193-208OW10.indd 193
193
11/10/09 10:43:52 AM
Clip-On Wire Separators
Professional Crimp Tool
Tough nylon separators withstand temperatures up to 400°F and are available for 7-8mm and 10.4mm spark plug wires. Choice of four colors. Each kit contains two 4-wire separators, two 3-wire separators and two 2-wire separators.
Tool uses a positive ratcheting system to produce factory quality crimps on spark plug wire terminals. Crimp dies may be purchased separately and used to cut and crimp traditional wire terminals, removing just the right amount of wire insulation without damaging the wire conductor.
Plug Wire Size
Black
Red
Yellow
Blue
7- 8mm 10.4mm
TAY42800 TAY42809
TAY42820 TAY42829
TAY42840 –
TAY42860 TAY42869
Part No.
Clamp Style Wire Separators Separates, organizes and supports ignition wires for a neat, organized job. Molded from nonconductive type 6/6 nylon, separators will not melt, mar, distort, crack or fade. Available to fit 7-8mm and “409” 10.4mm wire sizes. Choice of three colors. Each kit contains two 4-wire separators, two 3-wire separators and two 2-wire separators. Plug Wire Size
Black
Red
Blue
7-8mm 10.4mm
TAY42700 TAY42709
TAY42720 TAY42729
TAY42760 TAY42769
“T” Clip “409” Wire Separators TAY42609 Each clip separates two “409” Pro Race Wires in tight-fit areas for neat, tangle-free routing. Four clips per package. Easy installation.
Spark Plug Boot Protectors Universal fit protectors are 6 inches long and withstand temperatures up to 1200°F. Description
1 Per Package Part No.
8 Per Package Part No.
Silver Red Yellow
TAY2523 – –
TAY2524 TAY2562 TAY2564
Description
TAY43400 ..........Professional Crimp Tool TAY43401 ..........Crimp Die, Cuts 10-22 Gauge Insulated Terminals TAY43402 ..........Crimp Die, Cuts 10-22 Gauge Non-Insulated Wire
Toggle Switch TAY1018 Heavy duty die cast switch is rated at 50 amps. Fits 1/2" hole.
“Waterproof” Sealed Toggle Switch TAY1026 Ideal for dirt circle track, switch has internal O-rings and a plasticized body to protect against dirt and moisture.
Push Button Starter Switch TAY1016 Switch has a 60 amp rating with silver plated contacts and a neoprene cap to seal out dirt and moisture.
PX3 Xtreme Oil Booster TAY31820 NEW! Patented synthetic engine oil additive adds up to 5% more horsepower and torque, while protecting against heat, friction and wear. Fully compatible with standard petroleum or synthetic engine oils and equally safe for all gasoline or diesel engines. Simply replace 1 quart of preferred motor oil with 1 quart of PX3. May also be used as an engine assembly lubricant.
Red Heat Sleeving TAY2525 Sleeving fits over 7mm and 8mm plug wires for heat and abrasion protection. Withstands up to 500°F and is packaged in a 25 ft. roll.
Spark Plug Wire Removal Tool TAY43392 Tool has insulated handle and will not damage spark plug wires.
Multi-Purpose Tool TAY43390 Multi-Purpose tool will cut, strip and crimp all popular primary wire. Made of high-carbon steel, it will crimp both 7mm and 8mm spark plug wire ends. The plastic hand grips are non-conductive/nonslip and the tool is finished in rust-resistant black.
Chad Goff
194
Photos: Randy Ellen (upper) Jim DenHamer (lower)
2010
193-208OW10.indd 194
11/10/09 10:43:58 AM
Snap Straps
Thermo-Sleeve Thermo-Sleeve protects pipes, hoses and wires from radiant heat up to 2,000°F. Sold in 3 ft. and 12 ft. rolls. 3' Length Part No.
Description
1/4" To 1/2" Dia. 5/8" To 1" Dia. 1-1/8" To 1-1/2" Dia. 1-5/8" To 2" Dia. 2-1/8" To 2-1/2" Dia.
12' Length Part No.
THE14005 THE14006 THE14010 THE14011 THE14015 – THE14020 – THE14025 –
Aluminized Heat Barrier Reflective, high temperature barrier withstands radiant heat up to 2,000° F to prevent heat transfer through floorboards. Offered in three sizes: 12" x 12", 12" x 24" and 36" x 40". The two smaller sizes have an adhesive backing for quick installation. Part No.
Description
THE13500 .........Adhesive Backed Heat Barrier, 12" x 12" THE13575 .........Adhesive Backed Heat Barrier, 12" x 24" THE13585 .........Adhesive Backed Heat Barrier, 24" x 36" THE13590 .........Adhesive Backed Heat Barrier, 24" x 48"
Lightweight Total Support Seats With Halo Lightweight racing seats with added protection are made from 5052 aluminum. Seats feature a .250" thick, one-piece aluminum “Halo” for improved driver protection. “Halo” includes high density, impact absorbing foam on both the back and sides. Covers must be purchased separately. Size
Seat Part No.
Black Cover Red Cover Blue Cover Part No. Part No. Part No.
14" ULT72000-SH ULT72011 – – 15" ULT72200-SH ULT72211 ULT72212 ULT72213 16" ULT72400-SH ULT72411 ULT72412 ULT72413
Pro Seats Pro seats are made using quality, welded .125" thick 5052 aluminum and include perimeter extrusions, reinforced flush fit headrest and seat belt holes. Covers must be purchased separately. Size
Seat Part No.
15" 16" 17" 18"
ULT13110 ULT13120 ULT13130 ULT13140
Black Cover Red Cover Blue Cover Part No. Part No. Part No.
ULT13011 ULT13021 ULT13031 ULT13041
ULT13012 ULT13022 ULT13032 ULT13042
ULT13013 ULT13023 ULT13033 ULT13043
Straps secure exhaust insulating wrap, but may be used for other purposes as well. Narrow profile Snap Straps fit in tight spots and are packaged in pre-cut lengths of 9" and 18" with multi-locks attached. Part No.
Description
THE13101 .........V-8 Kit, Includes (8) 9" Straps, (4) 18" Straps THE13150 .........12 Pack Kit, Includes (12) 9" Straps THE13160 .........6 Pack Kit, Includes (6) 18" Straps
Hi-Heat Coating Specially formulated coating protects and colors header wrap. Prevents damage from fluids and flying debris. Withstands heat up to 2000°F. Works great on other high temperature applications also. Part No. Color Ground THE12001 .........Black Shipment THE12002 .........Aluminum Only THE12003 .........Copper
Tear-Aways Ultra Shield Tearaways are made from high quality, specially coated plastic for a tight, wrinkle-free fit. Coating provides maximum visibility without distor tion. Tearaways are 2 mil thick, packed in zip lock bags, 20 pieces per bag, with 10 bags in 1 box. Box Part No.
20 Pc. Bag Part No.
Description
ULT1201C ULT1201C-1 11-1/2" Post Centers/Straight, Simpson, Arai ULT1202C ULT1202C-1 12-3/8" Post Centers/Curved, Bell, G-Force, Pyrotech 11-1/2" Post Centers/Curved, ULT1203C ULT1203C-1 Simpson SX/Voyager, Shoei 11-1/2" Post Centers/Notch In Nose, ULT1204C ULT1204C-1 Simpson RX/Bandit/Diamondback ULT1207C ULT1207C-1 11-1/2" Post Centers, 3", Impact Champ 12" Post Centers/Straight, ULT1208C ULT1208C-1 Simpson (Older Bandits), Sparco ULT1209C ULT1209C-1 13" Post Centers/Curved, Simpson Shark ULT1212C – 10-3/4" Post Centers, Bieffe 13" Post Centers, Simpson ULT1213C ULT1213C-1 Super Shark/Vodo, Draft, Spider, Invader, Valor ULT1215B – 11-3/4" Post Centers, Impact Champ ULT1216C ULT1216C-1 10-7/8" Post Centers, Bell X-15, Impact Little Champ ULT1230C ULT1230C-1 11-3/4" Post Centers, Impact Vapor/Charger
360° Neck Collar Aluminum Knee Guard Part No.
Description
ULT91080 ..........Sprint Knee Guard Only, No Cover ULT91081 ..........Sprint Knee Guard Cover Only
Replacement Buttons Eccentric buttons replace worn shield buttons to securely mount tear-aways. Part No.
360° neck collars are manufactured from high density, flame retardant foam and are covered with heavy, flame retardant Proban material. Part No.
Description
ULT39111 ..........Black 360° Neck Collar ULT39112 ..........Red 360° Neck Collar ULT39113 ..........Blue 360° Neck Collar
Description
ULT1901 ............Aluminum Buttons, Pair ULT1902 ............Plastic Buttons, Pair
2010
193-208OW10.indd 195
195
11/10/09 10:44:20 AM
74-Series Long Master Cylinder Kits
Balance Bar TIL72-250
Tilton's 74-Series Master Cylinder Kits are universal with side or flange mount capability, easy interchange of remote reservoir, and a mounting bracket that adapts large or small reservoir to remote mount. Each master cylinder (5.6" long) kit includes lightweight aluminum master cylinder featuring dual fluid outlets and bleed screws, small (4.0 oz.) and large (10.7 oz.) reservoirs, remote reservoir mount kit, 3/16" inverted flare and -3AN adapter fittings. Outlet size is -3AN, 3/8"-24 thread.
Balance Bar works better than rod end style bars. Heat treated, rolled thread pivot bar has a 2-1/2" center-to-center measurement and can be adapted to current pedals or used to improve and update other manufacturers’ products. Works with TIL72-501 adjuster. 3/8"-24 thread
Description
Universal Master Cylinder Kit
Master Cylinder Only
Rebuild Kit
5/8" Bore Master Cylinder 7/10" Bore Master Cylinder 3/4" Bore Master Cylinder 13/16" Bore Master Cylinder 7/8" Bore Master Cylinder 15/16" Bore Master Cylinder 1" Bore Master Cylinder 1-1/8" Bore Master Cylinder
TIL74-625U TIL74-700U TIL74-750U TIL74-812U TIL74-875U TIL74-937U TIL74-1000U TIL74-1125U
– – TIL74-750 – TIL74-875 – TIL74-1000 –
TIL74-625RK TIL74-700RK TIL74-750RK TIL74-812RK TIL74-875RK TIL74-937RK TIL74-1000RK TIL74-1125RK
74 Series Master Cylinder Replacement Parts Tilton Brake offers quality replacement master cylinder components. Part No.
Description
TIL73-815-3L ........... -3AN Male Union TIL74-200 ................ Inlet Fitting TIL74-202 ................ Small Reservoir (4.0 oz.) TIL74-203 ................ Medium Reservoir (6.8 oz.) TIL74-204 ................ Large Reservoir (10.7 oz.) TIL74-207 ................ Reservoir Cap TIL74-208 ................ Clamp, Each TIL74-212 ................ Reservoir Adapter TIL74-212-A ............. O-Ring For Master Cylinder TIL74-214 ................ 24" Rubber Hose TIL74-400 ................ Push Rod (74 Series Only) TILTE2089-188L ....... 3/16" Inverted Flare to -3AN Male Fitting
Brake Proportioning Valves Adjustable hydraulic brake proportioning valves allow adjusting brake forces to a particular wheel or wheels. Lever-type model provides visual reference for seven distinctive reduction positions, while the Screw-Type unit allows fine adjustments of brake reduction. Part No.
Remote Brake Bias Adjusters Adjusters mount on balance bar so driver can quickly adjust brake bias. Standard model adjusters include a finger-grooved plastic adjustment knob and a vibrasionresistant, spring-loaded detent. Available for use with 3/8", 7/16" and 1/2" diameter balance bars. Part No.
TIL72-560
Description
TIL72-501 .........Standard Model Brake Bias Adjuster, 3/8"-24 TIL72-504 .........Standard Model Brake Bias Adjuster, 1/2"-20 TIL72-507 .........Standard Model Brake Bias Adjuster, 7/16"-20 TIL72-560 .........Right Angle Coupler, Prevents Adjuster Cable From Interfering With Clutch/Throttle. 3/8"-24 Thread
Brake Fluid Bleed Kit TIL72-503 Kit makes quick work of brake bleeding and has two 1/2 liter bleeding bottles, two lengths of hose, and instructions. Allows one person to bleed two calipers at the same time.
Racing Brake Fluid TILTBR-1
NEW!
Designed for the semi-professional racer or hobby racer, fluid has a dry boiling point of 590° F. and is well suited to super late models, late model stocks, SCCA road racing, etc. Sold in 8.5 oz. bottle.
NEW!
Supreme Racing Brake Fluid TILTSR-1 Proven in the highest forms of motorsports, fluid includes a dry boiling point of 622° F. and virtually eliminates the possibility of vapor lock. Exceeds DOT 4 specifications. Sold in a 8.5 oz. bottle.
Description
TIL90-1000 .......Lever-Type Proportioning Valve, -3AN Ports TIL90-1003 .......Lever-Type Proportioning Valve, 10mm x 1.0 Ports TIL90-2000 .......Screw-Type Proportioning Valve, -3AN Ports
Jim Lingar
196
Photo: Doug Swift
2010
193-208OW10.indd 196
11/10/09 10:44:32 AM
TR-1 Racing Oils MPZ oils reduce friction, wear and deposits for orr longer engine life, and are formulated for all 4, 6 and 8 cylinder high performance engines. Light-weight 10W40 and 20W50 oils add 8 to 12 more e horsepower and up to 40% more wear protection on than other oils of equal viscosity. The 50W oil delivelivvers maximum wear protection for prolonged high gh h temperature operation. Sold in liter bottles. One e liter bottles. Part No.
Description
TRC141040 .............. 10W40 TRC142050 .............. 20W50 TRC140050 .............. 50W
SR-5 Synthetic Racing Oils SR-5 racing oils are formulated with a balanced blend of high performance additives including liquid moly, phosphorus and zinc to provide superior protection from friction, wear and ex treme pressure. Ex tends engine life, MPZ synthetic racing oils will withstand tremendous heat and provide a thick protective oil film on bearings, crankshafts, pistons and valve train parts. One liter bottles. Part No.
Description
TRC150530 .............. 5W30 TRC150540 .............. 5W40 TRC152050 .............. 20W50
T Premium Break-In Oil TBO TTRCA100040CE NEW! Hydro-processed petroleum base stocks are engineered e n to aid break-in of camshaft and lifters and a n promote ring seating. A high zinc content prottect e critical engine components during initial startup. u p Ideal for breaking in engines prior to switching tto o synthetic oils. One liter bottles.
RGO Racing Gear Oils R RGO provides superior adhesive strength and extreme anti-score protection. Additives prevent wear and reduce heat, friction and noise, while providing positive operation of limited slip and positive traction differentials. One liter bottles. Part No.
SGO Synthetic Racing Gear Oils Torco synthetic hypoid gear oils provide maximum protection and per formance under the most demanding conditions. Gear oils exceed all requirements for wear protection while reducing friction and temperatures. One liter bottles. Part No.
SR-1 Synthetic Racing Oils Specially-blended 100% synthetic oils are engineered specifically for racing applications and include Generation-2 MPZ frictional loss technology combined with proprietary additives. SR-1 oils provide increased horsepower and torque, while offering improved durability. One liter bottles. Part No.
Description
TRC160520 .............. 5W20 TRC160530 .............. 5W30 TRCA161033CE ........ 10W30 TRCA161044CE ........ 10W40 TRC162050 .............. 20W50
MPZ Magnetic Friction Reducer TRC010011 Magnetic friction reducer oil additive with MPZ provides excellent wear protection and helps increase horsepower and torque.
Description
TRC248090 .............. 80W90 TRC248514 .............. 85W140
Description
TRC257514 .............. 75W140 TRC257590 .............. 75W90
ZEP High Performance Engine Protector TRCA010033LE Supplemental engine oil additive, ZEP (Zinc Enhanced Engine Protector) includes a balance of molybdenum, phosphorous and zinc, additives that have been recently removed from all API SL and SM motor oils. Sold in 12 oz. bottles.
MPZ Engine Assembly Lube MPZ is a concentrate of oil soluble molybdenum, phosphorus and zinc, fortified with polymers and a high polarity phosphorous to create a magnetic attraction to metal. Use MPZ to pre-lube cylinders, pistons, wrist pins, cams, lifters, etc. Part No.
Description
TRC550055 .......1 Oz. TRC550055J......4 Oz. TRC550055K .....12 Oz.
Jim Orzulac
Andrew Peters
2010
193-208OW10.indd 197
197
11/12/09 12:39:53 PM
TS1 Gapless® Second Ring File Fit Piston Ring Sets
Gapless AP Steel Top Ring File-Fit Piston Ring Sets NEW! Eight cylinder sets have AP (Advanced Profiling) steel top rings with extremely tight tolerances for improved combustion sealing. Sets include AP gapless top rings, conventional second rings, and standard tension oil rings. Instructions for file-fitting included. Bore Size
Gapless Top Ring
Conventional Second Ring
3-Piece Oil Ring
Ring Set Part No.
4.030" 4.125" 4.155" 4.165"
1/16" AP 1/16" AP 1/16" AP 1/16" AP
1/16" 1/16" 1/16" 1/16"
3/16" 3/16" 3/16" 3/16"
TOTMS3690-35 TOTMS0690-5 TOTMS0690-35 TOTMS0690-45
Gapless® Top Ring File Fit Piston Ring Sets Independent dyno tests proved that the Total Seal Gapless® Top Ring Sets can deliver more horsepower and torque than conventional piston rings. File fit ring sets include Gapless® top rings, conventional second rings and standard or special, low tension oil rings for eight cylinders. Low tension ring sets deliver a 25% reduction in tension when compared to standard oil rings. All sets listed below require file fitting. Bore Size
Gapless® Top Ring
Conventional Second Ring
3-Piece Oil Ring
Ring Set Part No.
4.030" 1/16" 1/16" 3/16" (Std.) TOTM3690-35 4.030" 1/16" 1/16" 3/16" (Low) TOTML3690-35* 4.040" 1/16" 1/16" 3/16" (Std.) TOTM3690-45 4.040" 1/16" 1/16" 3/16" (Low) TOTML3690-45* 4.060" 1/16" 1/16" 3/16" (Std.) TOTM3690-65 4.125" 1/16" 1/16" 3/16" (Std.) TOTM0690-5 4.130" 1/16" 1/16" 3/16" (Std.) TOTM7560-5 4.155" 1/16" 1/16" 3/16" (Std.) TOTM0690-35 4.155" 1/16" 1/16" 3/16" (Low) TOTML0690-35* 4.165" 1/16" 1/16" 3/16" (Std.) TOTM0690-45 *Sets include low tension oil rings for racing applications only!
QuickSeat TOTQS A dry film powder, QuickSeat aids piston ring seating. Sold in two gram containers.
Assembly Lubricant TOTAL4 Engineered by Total Seal to deliver proper lubrication during initial startup and break-in. AL4 burns off quickly after start-up and leaves no residue. May be used alone or with Quickseat. Sold in 4 oz. bottle.
Piston Ring Squaring Tool NEW! Guaranteed to be flat and parallel within .001". Install piston ring in the cylinder and push the ring down into the bore with the tool. It will place the ring squarely in the cylinder so that end gap can be precisely checked when filing rings. Part No.
Description
TOT08910 .........Piston Ring Squaring Tool, 4.000"-4.085" Bore TOT08915 .........Piston Ring Squaring Tool, 4.125"-4.200" Bore
198
Eight cylinder sets are ideal for racing engines and include ductile iron conventional top rings, Gapless® second rings, and standard, low tension, or low tension Gold Power oil rings. Low tension oil rings provide approximately 25% reduction in tension compared to standard oil rings, while special low tension, Gold power oil ring sets offer a 40% reduction in tension. All sets listed require file fitting. Bore Size
Ductile Iron Top Ring
Gapless® Second Ring
3-Piece Oil Ring
Ring Set Part No.
4.000" 1/16" 1/16" 3/16" TOTT3690-5 4.020" 1/16" 1/16" 3/16" (Std.) TOTT3690-25 4.030" 1/16" 1/16" 3/16" (Std.) TOTT3690-35 4.030" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-35* 4.030" 1/16" 1/16" 1/8" (Std.) TOTT0390-35 4.030" 1/16" 1/16" 3mm (Low) TOTT1001-35* 4.040" 1/16" 1/16" 3/16" (Std.) TOTT3690-45 4.040" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-45* 4.060" 1/16" 1/16" 3/16" (Std.) TOTT3690-65 4.060" 1/16" 1/16" 3/16" (Gold Power) TOTTG3690-65* 4.125" 1/16" 1/16" 3/16" (Std.) TOTT0690-5 4.125" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-5* 4.135" 1/16" 1/16" 3/16" (Std.) TOTT0690-15 4.145" 1/16" 1/16" 3/16" (Std.) TOTT0690-25 4.145" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-25* 4.155" 1/16" 1/16" 3/16" (Std.) TOTT0690-35 4.155" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-35* 4.155" 1/16" 1/16" 1/8" (Std.) TOTT1003-35 4.165" 1/16" 1/16" 3/16" (Std.) TOTT0690-45 4.165" 1/16" 1/16" 3/16" (Gold Power) TOTTG0690-45* 4.165" 1/16" 1/16" 1/8" (Std.) TOTT1003-45 *Sets include low tension oil rings for racing applications only!
TS1 Gapless Second Ring Standard Gap Piston Ring Sets NEW! Similar to TS1 eight cylinder piston ring sets (above), but file-fitting is not required. Sets include conventional ductile iron top rings, gapless second rings and standard tension oil rings. Bore Size
Ductile Iron Top Ring
Gapless Second Ring
3-Piece Oil Ring
Ring Set Part No.
4.030" 4.155" 4.165"
1/16" 1/16" 1/16"
1/16" 1/16" 1/16"
3/16" 3/16" 3/16"
TOTT3690-30 TOTT0690-30 TOTT0690-40
Classic AP Steel Top Ring File-Fit Piston Ring Sets NEW! Instead of the gapless top or second ring, sets include conventional AP (Advanced Profiling) steel top rings, with extremely tight tolerances for superior compression sealing. Sets include AP top rings, conventional second rings and three-piece, standard tension oil rings. All sets are for eight cylinders. Instructions for filefitting included. Bore Size
AP Steel Top Ring
Conventional Second Ring
3-Piece Oil Ring
Ring Set Part No.
4.030" 4.125" 4.155" 4.185"
1/16" 1/16" 1/16" 1/16"
1/16" 1/16" 1/16" 1/16"
3/16" 3/16" 3/16" 3/16"
TOTCS3690-35 TOTCS0690-5 TOTCS0690-35 TOTCS0690-65
2010
193-208OW10.indd 198
11/10/09 10:45:25 AM
SPRINT Sprint Revolution Chassis
Body And Panels
Bare Chassis TXRSCCH1000872H
TXRSCBW0016
TXRSCBW0031BLK
TXRSCBW0051BLK
TXRSCBW0100 Chassis With Body & Tin Kit TXRSCCH100187SHB
TXRSCBW0026
Gel-coated white fiberglass components are lightweight and strong. Available in black or white. Description
A race proven winner, the Revolution is an 87/40 raised rail chassis constructed from lightweight, durable 100% 4130 chrome moly tubing. Bare chassis is standard with left side safety/sissy bar, drive hoop, throttle stand, and wing spud. Chassis also available with body and tin. Part No.
Description
TXRSCCH100087SH .... Bare Chassis, Standard Big Cage TXRSCCH1000872H..... Bare Chassis, 2" Taller Big Cage TXRSCCH100187SH .... Chassis With Body & Tin Kit, Standard Big Cage TXRSCCH1001872H..... Chassis With Body & Tin Kit, 2" Taller Big Cage
Chassis Components Items are sold individually.
TXRSCEG0006 TXRSCCH0005 TXRSCCH0006
TXRSCEG0006BLK TXRSCCH0020
Part No.
Description
TXRSCCH0005 ...............Brake Pedal, 4130 Chrome Moly, Black TXRSCCH0006 ...............Gas Pedal, 4130 Chrome Moly, Black TXRSCCH0007 TXRSCCH0007 ...............Torque Tube Hoop TXRSCCH0020 ...............Halo, 4130 Chrome Moly TXRSCEG0006 ...............Aluminum Rear Motor Plate TXRSCEG0006BLK .........Aluminum Rear Motor Plate, Black Anodized NEW!
White Part No.
Front Air Box, Radiused Aluminum TXRSCCH0003 For More Aerodynamics Hood (Clean Air Design) Takes Cool Clean Air Deflected Off The Air Box Into The Motor. TXRSCBW0002 Dirty Air Is Directed Over And Around Hood Nose For Clean Air Hood, Deep Dish Pushes TXRSCBW0001 Dirty Air Over And Around Hood TXRSCBW0023* Clean Air Hood, 2" Tall TXRSCBW0021* Clean Air Nose, 2" Tall TXRSCBW0051* Dual Duct Cool Air Hood TXRSCBW0050* Dual Duct Cool Air Nose Right Arm Guard (For Use With Right Side Straight Safety Bar) TXRSCBW0004 Has Bubble For Elbow TXRSCBW0025* Right Arm Guard, 2" Tall Right Arm Guard Wedge Style, TXRSCBW0053* Use With Dual Duct Hood Left Arm Guard TXRSCBW0003 (For Use With Left Side Safety Bar) TXRSCBW0024* Left Arm Guard, 2" Tall Right Arm Guard, Flat Aluminum TXRSCBW0027 Left Side Kick Panel, Aluminum With Quick Fasteners Holes, Pre-Fit For Nerf Bars, Long TXRSCBW0005 Radius Rod Mounts, Standard Radius Rods, And Jacobs Ladder Right Side Kick Panel, 2-Piece, Aluminum With Holes, Pre-Fit For Nerf Bars, Long TXRSCBW0006 Radius Rod Mounts, Standard Radius Rods, And Jacobs Ladder Floor Pan, Aluminum With Quick Fastener TXRSCBW0007 Holes And Radiused Bends, 20-1/4" Long Dash, Aluminum With Quick Fastener Holes, Pre-Fit For Gas Pedal And Motor Plate TXRSCBW0008 Brackets, 90° Top Lip Floor Pan, Aluminum With Quick Fastener TXRSCBW0013 Holes And Radiused Bends, 17-1/4" Long TXRSCBW0016* Extended Side Pan, 15-1/2" TXRSCBW0018* Extended Side Pan, 18-1/2" Body Saver, Quick Fastener Bracket TXRSCBW0026* Protects Body Work Lower Right Kick Panel TXRSCBW0030* Upper Right Panel TXRSCBW0031* (Horizontal Split Design) TXRSCBW0032* Lower Left Kick Panel Upper Left Panel TXRSCBW0033* (Horizontal Split Design) Hood Plate Single TXRSCBW0100 Radiator Support, Aluminum Angle TXRSCCH0004 Springs, Lightweight Steel, 10 Pack TXRSCCH0018-10 Quick Fastener Button, TXRSCCH0019-10 Lightweight Steel, 10 Pack *NEW NEW
2010
193-208OW10.indd 199
Black Part No.
– TXRSCBW0002BLK TXRSCBW0001BLK TXRSCBW0023BLK* TXRSCBW0021BLK* TXRSCBW0051BLK* TXRSCBW0050BLK* TXRSCBW0004BLK TXRSCBW0025BLK* TXRSCBW0053BLK* TXRSCBW0003BLK TXRSCBW0024BLK* – –
– – – – – – – TXRSCBW0031BLK* – TXRSCBW0033BLK* – – – –
199
11/12/09 9:07:44 AM
SPRINT Aero Top Wing Trees
Sprint 50" x 2-1/2" Front Axle
Plated 4130 chrome moly top wing trees include aluminum adjusters with 3/4" adjustment holes, with a total of 3" of adjustment. “X” design for lateral and horizontal strength. Trees are offered in polished or black finishes Part No.
TXRSCTW0011BLK
Part No.
Description TXRSCTW0993
Top wing tree is made from plated 4130 chrome moly steel. Tree has 1" adjustment holes with a total of 6" of adjustment. “X” design for lateral and horizontal strength. Sold individually, adjuster pins not included. Trees are offered in polished or black finishes
Part No.
Description
TXRSCFA0002........... Chrome Front Axle 50" x 2-1/4", Lightweight TXRSCFA0008........... Black Front Axle 50" x 2-1/4", Lightweight TXRSCTW0012
TXRSCTW0002 ......... Polished Top Wing TXRSCTW0002BLK ... Black Top Wing TXRSCTW0012 ......... Top Wing Tree Sliders, Plated 4130 Chrome Moly
Bumpers And Nerf Bars
TXRSCBN0010
Front and rear Bumpers and nerf bars are CNC bent and jig built for quality and exact fit. Front bumpers are available in stainless steel or aluminum. Stainless steel rear bumper has a post and no basket. Post helps keep the push vehicle from jumping the bumper. Nerf bars are shorty style for raised rail chassis. Part No.
Sprint 50" x 2-1/4" Front Axle Plated, 2-1/4" O.D. x .120" wall chrome moly 4130 front axle is jig built for quality and fit. Axle weighs just 14.5 lbs., includes threaded Panhard bar stud and threaded shock mounts. Sold individually. Black powdercoat or chrome plated.
Top Wing Tree
Description
Description
TXRSCFA0004........... Chrome Front Axle 50" x 2-1/2", Lightweight TXRSCFA0010........... Black Front Axle 50" x 2-1/2", Lightweight
TXRSCTW0011 ......... Polished Top Wing Tree TXRSCTW0011BLK ... Black Top Wing Tree TXRSCTW0993 ......... Top Wing Tree Sliders For Aero Wing Tree
Part No.
2 1/2" x .095" wall 4130 chrome moly (tube) lightweight front axle. Jig built for exacting quality and fit. Black powdercoat or chrome plated.
Non-Winged Sprint Front Axles Chrome moly 4130, 2-1/4" x .120" wall front axles are designed for non-winged, dirt coil-over applications. Jig built axles include a black powder coated finish. Right side shock mount is designed for cars with extended right side shock towers. Sold individually. Part No.
Description
TXRSCFA0013........... 53" x 2-1/4", Front Axle, Black TXRSCFA0200........... 52" x 2-1/4", Front Axle, Black NEW! TXRSCBN0012
Description
TXRSCBN0001 .............Right Nerf Bar, Shorty ....................................Stainless Steel TXRSCBN0003 .............Left Nerf Bar, Shorty, ....................................Stainless Steel TXRSCBN0007 .............Rear Bumper With Basket, Stainless Steel TXRSCBN0009 .............Front Bumper, Aluminum TXRSCBN0010 .............Front Bumper, Stainless Steel TXRSCBN0011 .............Left Nerf Bar, Shorty, Straight Rail, ....................................Stainless Steel, Polished NEW! TXRSCBN0012 .............Rear Bumper With Post, Stainless Steel TXRSCBN0013 .............Right Nerf Bar, Long, Stainless Steel NEW! TXRSCBN0014 .............Left Nerf Bar, Long, Stainless Steel NEW! TXRSCBN0020 TXRSCBN0018 .............Rear Bumper With Post, No Diagonal Brace TXRSCBN0020 .............Right Nerf Bar, Ultra Light, Shorty NEW! TXRSCBN0021 .............Left Nerf Bar, Ultra Light, Shorty, Raised Rail NEW! TXRSCBN3472 .............Bumper And Nerf Bar Bolt Kit NEW!
Top Wing Posts TXRSCTW00100 Top wing post fits Vortex/ FAST/Velocity Wings. Post will fit other wings, depending upon the height of the "T". This post has a 5/8" high "T". Chrome plated 4130 steel.
Nose Wing TXRSCNW0001 Wing has center mount, large angled side boards, deep dish and heavy-duty (.090") extruded aluminum nose cap.
Nose Wing Components Items are sold individually. TXRSCTW0020 TXRSCTW0023
Jacobs Ladder 13-5/8" Jacobs Ladder includes standard straps or no straps (nuts and bolts not included.) Plated and jig built for quality and exact fit. CNC-machined lightweight straps are also available. Offered in polished or black finishes.
TXRSCTW0021 Part No. Description
TXRSCSU0002BLK
TXRSCTW0020* ..... Nose Wing Aero Front Post, Polished Stainless Steel TXRSCTW0021 ...... Nose Wing Aero Rear Strap, Polished Stainless Steel TXRSCTW0022* ..... Nose Wing Front Post Clamp, Chrome Plated Steel TXRSCTW0023 ...... Front Nose Wing Post Bend, Forward, Chrome Plated Steel NEW! TXRSCTW0028 ...... Front Nose Wing Post, Straight, Chrome Plated Steel NEW! *Should be used together
Description
Polished Part No.
Black Part No.
13-5/8 Jacobs Ladder With No Straps 13-5/8" Jacobs Ladder With Std. Straps 14" Jacobs Ladder With No Straps 14" Jacobs Ladder With Std. Straps Lightweight Straps *NEW NEW
TXRSCSU0002*
TXRSCSU0002BLK*
Rod Ends NEW!
TXRSCSU0004
TXRSCSU0004BLK*
Part No.
200
TXRSCSU0006* TXRSCSU0008 TXRSCSU0010
TXRSCSU0006BLK* TXRSCSU0008BLK* – TXRSCSU0010
TXRSCTW0022
Description
TXRSCSU0300 ...RH Thread, Aluminum, 5/8" x 1/2" Hole TXRSCSU0301 ...LH Thread, Aluminum, 5/8" x 1/2" Hole TXRSCSU0302 ...RH Thread, Steel, 5/8" x 1/2" Hole TXRSCSU0303 ...RH Thread, Steel, 5/8" x 1/2" Hole TXRSCSU0304 ...Jam Nut, 5/8", RH Thread, Aluminum TXRSCSU0305 ...Jam Nut, 5/8", LH Thread, Aluminum TXRSCSU8267 ...RH Thread, 4130 Moly Steel, 5/8" x 1/2" Hole
2010
193-208OW10.indd 200
11/12/09 9:08:29 AM
SPRINT Sprint Car Tie Rods And Drag Links Offered in steel or aluminum in a variety of lengths. Sold individually.
Steel Tubes Plated 4130 chrome moly Tie Rods and Drag Links are 1-1/8" dia. in various lengths with welded (spud) ends. Part No.
Length
Aluminum Tubes Typically used for tie rods or drag Links on sprint chassis, heavy duty 1-1/4" O.D. x .150" wall aluminum tubing includes 5/8" threads at each end, and an attractive, polished finish. Length
TXRSCSU4400 .... 45-3/4" TXRSCSU4401 .... 46-1/2" TXRSCSU4402 .... 47-3/4" TXRSCSU4403 .... 48"
Part No.
Aluminum long radius rod brackets mount to chassis at the motor plate (upright tubes) and align the front of the long radius rod with the torque ball. Left bracket has five adjusting holes. Right bracket has three adjusting holes. Sold in pairs. TXRSCSU0100BLK
TXRSCSU0100P
Polished aluminum radius rods are 1-1/8" dia. for strength. 5/8" thread. Description
Polished TXRSCSU0101 ........18" TXRSCSU0100 ........18-1/2" TXRSCSU0103 ........19 TXRSCSU0102 ........19-1/2" TXRSCSU0105 ........20" TXRSCSU0104 ........20-1/2" TXRSCSU0107 ........21" TXRSCSU0106 ........21-1/2" TXRSCSU0109 ........22" TXRSCSU0108 ........22-1/2" TXRSCSU0111 ........23" TXRSCSU0110 ........23-1/2" TXRSCSU0112 ........24"
Part No.
Specialized dolly is ideal when building or repairing Sprint car chassis. Plated, sturdy unit includes height adjustment feature and heavy duty casters to ease movement. Removable 1" block allows use with standard or raised rail chassis. Sold in pairs.
Radius Rod Brackets TXRSCSU0120
Length
TXRSCSU4404 .....48-3/4" TXRSCSU4405 .....49" TXRSCSU4406 .....50" TXRSCSU4407 .....51"
Radius Rods
Part No.
Super lightweight, polished aluminum valve covers feature billet machined rails for dependable, effective sealing. Sold per pair.
Frame Stand/Dolly TXRSCPA0002
TXRSCSU0200 .......... 45-3/4" TXRSCSU0201 .......... 46-1/2" TXRSCSU0203 .......... 48" TXRSCSU0205 .......... 49" TXRSCSU0206 .......... 50" TXRSCSU0207 .......... 51"
Part No.
SB Chevy Fabricated Aluminum Valve Covers TXRSCEG0003
Description
Black TXRSCSU0101BLK ........18" TXRSCSU0100BLK ........18-1/2" TXRSCSU0103BLK ........19" TXRSCSU0102BLK ........19-1/2" TXRSCSU0105BLK ........20"" TXRSCSU0104BLK ........20-1/2" TXRSCSU0107BLK ........21" TXRSCSU0106BLK ........21-1/2" TXRSCSU0109BLK ........22" TXRSCSU0108BLK ........22-1/2" TXRSCSU0111BLK ........23" TXRSCSU0110BLK ........23-1/2" TXRSCSU0112BLK ........24"
Pit Stands TXRPA0009 Pit Stands are anodized aluminum. Comes with rubber inserts to stop car frames from sliding in the pits. Wide feet so cars won't sink into dirt. Stackable, lightweight and compact. Sold in pairs
Steering Wheels
TXRST0002 Part No.
TXRST0002BLK
Description
TXRST0001 .............. 15" Wide, 1" Tube, Lightweight Aluminum TXRST0002 .............. 15" Wide, 1-1/8" Tube, Lightweight Aluminum TXRST0002BLK ........ 15" Wide, 1-1/8" Tube, Lightweight Aluminum, Black
Chris Andrews
Photo: Jim DenHamer
Ryan Ruhl
Photo: Doug Swift
2010
193-208OW10.indd 201
201
11/12/09 8:39:18 AM
MINI SPRINT Mini Sprint Chassis And Kits Same design as the most popular chassis on the market today. Exact pickup points, motor plate location, torsion tube location, etc.
Bare Chassis TXR600CH1000
Mini Sprint Racer Kit With Nerfs, Axles And Arms TXR600CH1002
Mini Sprint B Kit Chassis, Body, Tin TXR600CH1001
Part No.
Description
TXR600CH1000 ........ Mini Sprint Chassis Bare Frame TXR600CH1001 ........ Mini Sprint B Kit Chassis, Body And Tin Kit TXR600CH1002 ........ Mini Sprint Racer Kit With Nerfs, Axles And Arms TXR600CH1003 ........ Mini Sprint Deluxe Kit With Suspension Mini Sprint Deluxe Kit With Suspension TXR600CH1003
Body And Tin Components Items are sold individually. Part No.
Description
TXR600BW0001 ...............Hood, White TXR600BW0001BLK .........Hood, Black TXR600BW0002 ...............Left Hand Guard, White TXR600BW0002BLK .........Left Hand Guard, Black TXR600BW0003 ...............Right Hand Guard, White TXR600BW0003BLK .........Right Hand Guard, Black TXR600BW0004 ...............Floor Pan, Front TXR600BW0005 ...............Floor Pan, Rear TXR600BW0006 ...............Kick Panel, Left Side, 2 Pieces TXR600BW0007 ...............Kick Panel, Right Side, 3 Pieces TXR600BW0008 ...............Mini Sprint Dash TXR600BW0009 ...............Chain Guard TXR600BW0010 ...............Motor Shroud TXR600BW0011 ...............Electronics Panel TXR600BW0012 ...............Front Air Box TXR600BW0013 ...............Cockpit Panel, Left Hand
TXR600BW0001BLK
TXR600BW0002BLK
TXR600BW0002
TXR600BW0012 TXR600BW0010
TXR600BW0008 TXR600BW0013 TXR600BW0009
202
2010
193-208OW10.indd 202
11/10/09 10:46:54 AM
MINI SPRINT Mini Sprint Radius Rods
Mini Sprint Torsion Arms, Stops And Bushings
TXR600SU0019 TXR600SU0023
TXR600SU0172
TXR600CH3001
TXR600SU0025 Part No.
Description
TXR600SU0019 ........ Front Radius Rod, 3/8" x 15-1/2", Aluminum TXR600SU0020 ........ Panhard Radius Rod, 3/8" x 15-1/2", Aluminum TXR600SU0021 ........ Drag Link Radius Rod, 3/8" x 14-1/2" TXR600SU0022 ........ Tie Rod, 3/8" x 36-1/2" TXR600SU0023 ........ Left Rear Radius Rod, 7/16" x 20" TXR600SU0024 ........ Right Rear Radius Rod, 7/16" x 21" TXR600SU0025 ........ Brake Rod, Steel, 7/16" x 20"
Mini Sprint Rear End Components
TXR600SU0173 Part No.
Description
TXR600SU0170 ........ Torsion Stop, Aluminum TXR600SU0171 ........ Torsion Arm, Left Front TXR600SU0172 ........ Torsion Arm, Right Front TXR600SU0173 ........ Torsion Arm, Left Rear TXR600SU0174 ........ Torsion Arm, Right Rear TXR600CH3001 ........ Torsion Bar Bushings, Sold Individually
TXR600SU0170
Mini Sprint Front End Components
TXR600SU0180
TXR600SU0192
TXR600SU0017
TXR600SU9000 TXR600SU0453 Part No.
Description
TXR600BK0001 ........ Rear Brake Rotor, Steel, Ultra Light TXR600BK0002 ........ Rear Brake Carrier With Bearings And Hardware TXR600SU0017 ........ Splined Bearing Spacer For Bird Cage, Double Bearing, 1-1/4" TXR600SU0018 ........ Splined Bearing Spacer For Brake Carrier, Single Bearing, 5/8" TXR600SU0101 ........ Bare Rear Axle Tube, 52" TXR600SU0102 ........ Axle Nut, Right Hand TXR600SU0103 ........ Axle Nut, Left Hand TXR600SU0180 ........ Sprocket/Rotor Hub, 1/4"-28 TXR600SU0181 ........ Sprocket/Rotor Hub, 5/16"-20 TXR600SU0192 ........ Bird Cage With Bearing, Left Hand TXR600SU0193 ........ Bird Cage With Bearing, Right Hand TXR600SU0200 ........ Bearing For Brake Carrier TXR600SU0202 ........ Rear Bird Cage Bearing TXR600SU0453 ........ Rear Axle Spacer Kit, 11 Pieces TXR600SU9000 ........ Complete Rear Axle Assy.
Mini Sprint Bumpers And Nerf Bars
TXR600FE9023
Part No.
Description
TXR600FA0002 ......... Front Axle Bare, Torsion Bar Style TXR600FA0003 ......... Front Axle Bare, Coil Over Style TXR600FA0007 ......... King Pin With Clips, Sold Individually TXR600FA0008 ......... Spindle, Right Hand TXR600FA0009 ......... Spindle, Left Hand TXR600FA0010 ......... Steering Arm, Left Front Combo TXR600FA0011 ......... Steering Arm, Right Front Combo TXR600FA0012 ......... Front Splined Nut, Sold Individually TXR600FE0652......... Thrust Bearing Shim, Sold Individually TXR600FE0653......... Thrust Bearing, Sold Individually TXR600FE9023......... Complete Front End
Mini Sprint Steering Components
TXR600ST0004
TXR600ST0005
TXR600BN0001 TXR600BN0005
Part No.
Part No.
Description
TXR600ST0001 ........ U-Joint Steering TXR600ST0002 ........ Lower Steering Shaft, 20-3/4" TXR600ST0001 TXR600ST0003 ........ Upper Steering Shaft TXR600ST0004 ........ Steering Box, Rack And Pinion Frame Mount TXR600ST0005 ........ Upper Steering Support Bracket
Description
TXR600BN0001 ........ Nerf Bar, Right Hand, Stainless Steel TXR600BN0002 ........ Nerf Bar, Left Hand, Stainless Steel TXR600BN0005 ........ Rear Bumper, Stainless Steel TXR600BN0010 ........ Front Bumper, Stainless Steel
2010
193-208OW10.indd 203
203
11/12/09 8:40:21 AM
MINI SPRINT Jacobs Ladder TXR600SU0002
Pedal, Clutch And Chain Components
10-1/4" Jacobs Ladder is chrome plated with straps and jig built for quality and exact fit.
Engine Components
TXR600CH2045 TXR600DL0002
TXR600EG0040
Part No.
TXR600EG0039 TXR600EG0527 Part No.
TXR600EG0043 Description
TXR600EG0039 ........ Battery Box TXR600EG0040 ........ Motor Mount Kit With Hardware, Yamaha R6 TXR600EG0043 ........ Motor Adjuster With Ends TXR600EG0527 ........ Complete Exhaust System
Description
TXR600CH2019 ........ “XPRS” Throttle Pedal TXR600CH2020 ........ “XPRS” Brake Pedal TXR600CH2045 ........ “XPRS” Brake And Throttle Pedal System TXR600DL0001 ........ Drive Chain, Gold Link TXR600DL0002 ........ Drive Tensioner Kit TXR600EG0007 TXR600DL0003 ........ Drive Tensioner Wheel TXR600EG0007 ........ Shift Lever TXR600EG0012 ........ Clutch Lever TXR600EG0012
Wing Components
Hardware Kit TXR600CH2846 Kits includes all steel bolts and nuts to assemble car. TXR600TW0013
TXR600TW0003 Part No.
Description
TXR600NW0003 ....... Nose Wing With Large Side Boards TXR600TW0002........ Top Wing Tree TXR600TW0004........ Top Wing Post, Sold Individually TXR600TW0007........ Top Wing Manual Slider TXR600TW0013........ Top Wing With Internal Runners And 1" Dish TXR600TW0024........ Aero Nose Wing Strap, Sold Individually TXR600TW0025........ Front Nose Wing Post, Sold Individually
NEW VENDOR
Racing Brake Rotors
Aluminum Master Cylinders
Cast from high grade alloys for superb thermal shock stability, rotors are machined and Blanchard ground for precise flatness. 8-bolt x 7" bolt circle x 11.75" diameter.
New and improved, aluminum master cylinders have high capacity reservoirs and precise bores. External return spring provides positive pedal feel and prolongs pad life. Dual mounting bolt pattern and use of standard 1/8" NPT port fittings allow easy installation.
Part No.
Description
USB9850-6021 Straight Vane 8 Bolt
Thickness Bolt Circle
.810"
7"
Weight
8.2 Lbs.
Ultra HTX Brake Fluid Exceeds DOT 3, 4, and 5.1 requirements, non-silicone, wet boiling point exceeds 420 degrees, dry boiling point exceeds 600 degrees. Eliminates vapor lock. Sold in 16.9 oz. bottles, or in cases of (12). Part No.
Description
USB9501-6600......... Ultra HTX Brake Fluid, 16.9 oz. Bottle USB9501-7600......... Ultra HTX Brake Fluid, Case (12) 16.9 oz. Bottles
204
Description
Master Cylinder Kit
Master Cylinder Rebuild Kit
3/4" Bore Master Cylinder 7/8" Bore Master Cylinder 1" Bore Master Cylinder Replacement Components
USB2011-1512 USB2011-1514 USB2011-1516
USB2011-1512K USB2011-1514K USB2011-1516K
Part No.
Description
USB2012-2050......... Lid USB2012-2051......... Gasket USB2012-2052......... Retainer Wire USB2012-2053......... Push Rod Kit USB2012-2055......... External Boot
2010
193-208OW10.indd 204
11/12/09 9:09:58 AM
All-In-One-Silicone
Peeler VLC71688
Premium grade RTV Silicone can fulfill all of a racer’s sealing needs. Colors are low volatility, oxygen sensor safe and will withstand high temperatures. 3 oz. tubes or 11.3 oz. cartridges.
Removes silicone, paper or fiber gasket material more quickly and easily than a gasket scraper. Short, easy-to-hold Peeler has a unique, self-leveling blade assembly that won’t dig in or gouge surfaces and maintains a good, sharp cutting edge.
Description
3 Oz. Tube Part No.
11.3 Oz. Cartridge Part No.
Clear All-In-One Silicone VLC71105 – Black All-In-One Silicone VLC71135 VLC71142 Aluminum All-In-One Silicone VLC71195 VLC71202
Thread Lockers Anaerobic compounds developed for locking, retaining, and sealing fasteners and components. Work in a wide temp range, prevent corrosion, lubricate components during assembly and resist water and oils. Available in medium strength for parts that need periodic disassembly, and high strength for parts that will not be disassembled.
Tube-Grip® With All-In-One Silicone VLC71196
Part No.
Tube-Grip® is an innovative, 14 gauge steel tool that can easily dispense material from flexible tubes with no waste. Applies 10 times the pressure of squeezing by hand and dispenses up to 35% more material out of each tube. Complete with 3 oz. tube of aluminum All-In-One silicone.
Gel Lube VLC71756
Ground Shipment Only Unique lubricant sprays on as a liquid and instantly forms into a gel substance. Ideal for use during engine assembly process to prevent corrosion. Blends together with motor oil. Excellent corrosion protection for any engine or transmission which is to be stored.
Hylomar® Gasket Maker Non-hardening, polyurethane-based Hylomar is impervious to gasoline, oil and any automotive fluid. Use Hylomar as a gasket maker, gasket dressing or thread sealant. Part No.
Description
VLC71620..........Medium Strength Blue, 10 ml Bottle VLC71622..........High Strength Red, 10 ml Bottle
Description
VLC71255..........Hylomar Blue, Medium, 1.5 oz. Tube VLC71260..........Hylomar Blue, Medium, 250 ml Brush Top Can VLC71285..........Hylomar Blue, Medium, 100 Gram Tube VLC71294..........Hylomar, 360g Aerosol Can VLC71301..........Hylomar, 3.5 oz. Tube
White Lithium Grease VLC795903 Multi-purpose, 12-hydroxy, lithium-based Grease has outstanding resistance to water and is perfect for high-speed, heavy load applications. Mechanically stable lubricant also contains oxidation and corrosion inhibitors. 10 oz. tube.
Fastshine™ Cleaner/Detailer VLC71603 HV-350™ Adhesive/Sealant
Fastshine gives a quick, professional shine to a variety of surfaces, including clear coat. Removes fingerprints, bugs, water spots, bird droppings, etc. 32 oz. spray bottle.
Valco HV-350’s elasticity and abrasion resistance make it ideal for high vibration applications. Sandable material bonds both chemically and mechanically and can be used on porous and non-porous substrates such as wood, glass, plastic, vinyl, metal, fabric and even concrete. Can be thinned with solvents such as Valco Solvent 184 or lacquer thinner and be brushed on as a protective coating. Part No.
Magic Mix® Metal Cleaner And Polish
Description
VLC71155..........HV-350, Non-Slump, 3.35 oz. Tube VLC71156..........HV-350, Non-Slump, 3.35 oz. Tube w/Tube Grip
VLC71156
Epoxi-Putty VLC71636 Kneadable, steel reinforced EpoxyPut ty cures rock-hard within minutes of mixing. Can be drilled, tapped or filed after 1 hour and can withstand temperatures up to 500°F. Packaged in 2 oz. clear cylinder with cap.
The “Lazy Man’s Polish” shines and protects aluminum, stainless steel, diamond plate, brass, gold, silver, magnesium and copper. Magic Mix® removes oxidation, tar and bugs from paint and even removes rust from chrome. For tough stains, clean and prepare metal with Magic Mix® Metal Cleaner. Part No.
Description
VLC71610..........Magic Mix® Cleaner and Polish Set, 8 oz. Each VLC71611..........Magic Mix® Polish, 8 oz. Bottle VLC71640..........Magic Mix® Polish, 16 oz. Bottle VLC71644..........Magic Mix Speed Wax, 16 oz. Bottle
2010
193-208OW10.indd 205
205
11/10/09 10:48:14 AM
High Performance 75W90 Synthetic Gear Oil VAL975
VR1 Racing Formula® Motor Oil Oil is used by circle track racers in all classes, from street stock to Sprint Cup. Reduces engine wear and sludge, controls foaming and maintains peak engine power. Sold in one quart bottles. Part No.
100% synthetic, extreme pressure 75W90 lubricant withstands high and low temperatures and may be used in conventional or limited slip differentials. Sold in one quart bottles.
Description
VAL205 ..............SAE 10W-30 VAL211 ..............SAE 20W-50 VAL223 ..............SAE 30 VAL229 ..............SAE 40 VAL235 ..............SAE 50 VAL241 ..............SAE 60
High Performance 80/90 Gear Oil VAL831 Offers superior protection to differential gears and bearings. Meets or exceeds requirements in all rear axles, including limited slip types. Meets API Services GL-5, GL-6 ratings. Sold in one quart bottles.
Durablend® Motor Oil The #1 selling semi-synthetic motor oil in the U.S. Provides anti-wear protection, greater high and low temperature protection. Sold in one quart bottles. Part No.
Val-Plex EP® Grease VAL614
Description
VAL291 ..............SAE 5W-30 VAL296 ..............SAE 10W-30 VAL311 ..............SAE 20W-50
Premium quality, multi-purpose wheel bearing grease is formulated for maximum per formance and protection. Resists high temperatures and withstands heavy loads. One pound can.
Synthetic Motor Oil Valvoline’s 100% synthetic motor oil delivers superior lubrication, performance, and extreme temperature protection. Extensive testing has proven increased horsepower, less wear and cooler engine temperatures. Sold in one quart bottles. Part No.
TOOLS & ACCESSORIES
Description
VAL955 ..............SAE 5W-30 VAL935 ..............SAE 10W-30 VAL945 ..............SAE 20W-50
Drain Pan ALL40112
Premium Conventional Motor Oil Specially formulated motor oils include advanced additive technology and premium base oils for high performance and enhanced engine life. Multi-viscosity grades offer protection, while mono-grade oils are formulated for warmer conditions. Sold in one quart bottles. Part No.
Quick-Change Drain Pan ALL14166
Description
VAL177 ..............SAE 5W-30 VAL129 ..............SAE 10W-30 VAL141 ..............SAE 10W-40 VAL135 ..............SAE 20W-50 VAL159 ..............SAE 30
Drain Pan With Pump ALL14171 Funnels
ALL40104
ALL40106
ALL40109 ALL40107
ALL40108
SEE PAGES 10 & 14 FOR MORE INFORMATION Ryan Kaplan
206
Photo: Jim DenHamer
2010
193-208OW10.indd 206
11/10/09 10:48:29 AM
All Items On This Page
Ground Shipment Only Flameproof Coatings
“Nu-Cast” Cast Coatings
Developed for the aerospace industry, heat resistant coating is ideal for use on headers, exhaust manifolds, etc. 11 oz. aerosol can.
Makes cast iron parts look like new. Produces that original look and is a “must have” item for that restoration project. 11 oz. aerosol can.
Part No.
VHTSP995 .........Aluminum Paint VHTSP997 .........Cast Iron Paint VHTSP998 .........Header Paint
Part No.
Color
VHTSP101 .........Flat White VHTSP102 .........Flat Black VHTSP106 .........Flat Silver VHTSP108 .........Flat Yellow VHTSP109 .........Flat Red VHTSP110 .........Flat Blue VHTSP115 .........Clear VHTSP117 .........Flat Aluminum VHTSP118 .........Flat White Primer
“Quick Coat” Enamels VHTSP102
VHTSP108
Designed to provide a tough and durable enamel coating without heat curing or special processing. Ideal for professional or home use. 11 oz. aerosol can. Part No.
Engine Enamels Urethane resins provide exceptional durability under the most severe conditions. Paint will withstand spillage of the strongest solvents and additives found in racing gasoline blends. 11 oz. aerosol can. Part No.
Color
VHTSP501 .........Fire Red VHTSP504 .........Gloss Black VHTSP507 .........Bright Aluminum VHTSP509 .........Gloss White VHTSP510 .........Flat Black
Color
VHTSP120 .........Hemi Orange VHTSP121 .........Bright Red VHTSP122 .........Pontiac Blue VHTSP123 .........Chevy Orange VHTSP124 .........Gloss Black VHTSP125 .........Ford Dark Blue VHTSP126 .........Early Chrysler Blue VHTSP127 .........Aluminum VHTSP128 .........Gloss Yellow VHTSP129 .........Gloss White VHTSP130 .........Flat Black VHTSP132 .........Universal Gold VHTSP134 .........Ford Light Blue VHTSP135 .........GM Blue VHTSP137 .........Ford Grey VHTSP138 .........Ford Corporate Blue VHTSP139 .........GM Satin Black VHTSP145 .........Gloss Clear
Epoxy All Weather Coatings VHT Epoxy Coating produces porcelain-like hardness with a high gloss. The durable finish makes it an excellent choice. 11 oz. aerosol can. Part No.
Color
VHTSP650 .........Gloss Black VHTSP651 .........Gloss White VHTSP652 .........Satin Black
VHTSP120
VHTSP130
Hi-Temp Brake Paint High-Temp Paint may be used on aluminum or cast metals and is ideal for brake drums, and calipers. Will not rust, chip or crack. 11 oz. aerosol can. Part No.
“Prime Coat” Sandable Primers Provides an excellent base for enamel or synthetic lacquer paint. A quick, fast-drying base coat with excellent adhesion. 11 oz. aerosol can. Part No.
Description
Color
VHTSP731 .........Real Red VHTSP734 .........Gloss Black VHTSP735 .........Cast Aluminum VHTSP738 .........Bright Yellow VHTSP739 .........Satin Black
Color
VHTSP301 .........White VHTSP302 .........Dark Grey VHTSP303 .........Red Oxide VHTSP304 .........Light Grey VHTSP305 .........Black VHTSP306 .........Yellow
Roll Bar And Chassis Paint One step epoxy paint dries to a porcelain-like finish that is chemical, corrosion, rust and salt resistant. 11 oz. aerosol can. Part No.
Color
VHTSP670 .........Gloss Black VHTSP671 .........Satin Black
Ryan Litt
Photo: Jim DenHamer
2010
193-208OW10.indd 207
207
11/10/09 10:48:58 AM
FORMERLY
Chromoly Front Axles
Billet Combo Steering Arm VMC1305
Made of 4130 chromoly tubing right here in the USA, King axles are completely jig-welded ensuring an exact production tolerance on every axle. Part No.
The strongest, lightest combo steering arm on the market, the 6061-T6, fully radiused arm is black anodized and machined to perfection with the forward drag link hole located 1" farther forward for better turning radius.
Description
VMC1005 ..........Front Axle, 50" x 2-1/2", Non-Plated VMC1015...........Front Axle, 50" x 2-1/4", Non Plated VMC1025...........Front Axle, 53" x 2-1/4", Non-Plated
Billet Right Front Steering Arm VMC1315
Direct Mount Front Hubs King aerospace aluminum alloy front hubs, with or without brake mounts, are made to last and include bearings, seals and Grade 8 fasteners. Hubs will fit Sander, Weld, Circle, MPD and Keizer wheels and are available in silver and gold powder coated versions and in pairs or individually. All are designed to be oil or grease filled. Part No.
A direct match for the combo steering arm, the black anodized aluminum right front arm is designed with two things in mind: optimal weight savings and maximum strength.
VMC1200
Description
VMC1200...........Direct Mount Front Hubs, Gold, Sold In Pairs VMC1205...........Direct Mount Front Hubs, Silver, Sold In Pairs VMC1230...........Front Hub Bearings, Sold Individually VMC1235...........Hub Face, Sold Individually VMC1240...........Hub Dust Cap VMC1245...........Spiral Lock VMC1250...........O-Ring, Front Hub VMC1255...........Hub Seal
Ultralite Tubular King Pin Kingpins are machined from 4340 chromoly with a flange on one end so only one billet aluminum cap needs to be included. Part No.
Description
Billet Angle Broached Pitman Arm VMC1415 Angle broached aluminum arm provides the extra offset needed for short steering boxes. The 3-D, CAD designed lightening pockets and radiused edges make this the arm that will withstand the roughest tracks. Anodized black.
Steering Gear Locators Billet aluminum locators are available in three styles, each black anodized and radius machined with chamfered holes for ease of installation and maximum strength. Part No.
Description
VMC1420...........Steering Box, 1/2" Mount VMC1425...........Standard Steering Gear Locator VMC1430...........Bottom Fuel Shutoff Steering Gear Locator VMC1435...........Left Side Fuel Shutoff Steering Gear Locator
VMC1430 VMC1420
VMC1320...........King Pin Tubular, Ultralite With Cap VMC1335...........Thrust Kit, Four Washers And Two Bearings
Billet Torque Ball And Housing Aluminum Front Torsion Arms The engineers at King noticed something about every front torsion bar on the market. They flex. Not a good thing. Many hours designing and testing at King has resulted in a front torsion arm that won’t flex. Made of the finest American aluminum, the arms are available in three configurations: traditional, angle broached and “S” style. All are atomically broached. Part No.
Description
VMC1105...........Front Torsion Arm, Short, Black Anodized VMC1115...........Front Torsion Arm, Long, Black Anodized VMC1125 ..........Left Front Torsion Arm, “S” Style, Black Anodized VMC1135...........Right Front Torsion Arm, Angle Broached, Black Anodized VMC1145...........Torsion Bar Stop, 1-3/4" Split, Black Anodized VMC1155...........Torsion Bar Stop, 2" Split, Black Anodized, Steel
208
Rigid, 7075 billet aluminum torque ball housing combines the benefits of improved driver safety and added performance. Unit is engineered to retain debris in the event of a U-joint failure, while the pivoting design provides reduced driveline resistance. CADdesigned torque ball is fully CNC-machined for optimum strength-toweight, while available housing retainer kit is specifically designed to speed torque ball and housing service.
VMC1605 Part No.
VMC1610
VMC1615
Description
VMC1605...........Torque Ball Housing VMC1610...........Torque Ball VMC1615...........Torque Ball Housing Stud Kit
2010
193-208OW10.indd 208
11/10/09 10:49:29 AM
FORMERLY
Torque Tube Assembly VMC1600
Big Tube Aluminum Steering Wheel VMC1460
Made from the same super alloy as the King Bird Cages and front hubs. The lightweight pockets on the backside of the large flange makes this torque tube not only lightweight but also strong. The long rib style collar takes out any flex in the tube.
Eliminate forearm cramps and fatigue with Kingâ&#x20AC;&#x2122;s large, 15" aluminum steering wheel. Made with 1-1/4" diameter tubing, the wheel has dimples on the bottom for additional grip and is anodized black.
Super Bird Cages VMC1700 T6 aluminum alloy bird cages are one-piece and are the strongest and lightest available. Black powder coated and fitted with Grade 8 hardware. Sold in pairs. Bird Cage Accessories Part No.
Description
VMC1715...........Top Bird Cage Bolt VMC1720...........Bottom Bird Cage Bolt VMC1725...........Bearing Angular Contact, 28mm VMC1730...........Spiral Lock VMC1735...........Brake Mount, Standard Left Or Right
Jacobs Ladders Made from 4130 chromoly tubing and welded in jig fixtures, King ladders are true and strong. With 6061 aluminum straps and Grade 8 hardware, the Jacobs ladders are plated, complete and ready to bolt on. Part No.
Description
VMC1805...........13-1/4" Jacobs Ladder Assembly VMC1815...........13-1/2" Jacobs Ladder Assembly VMC1825...........13-5/8" Jacobs Ladder Assembly VMC1835...........14" Jacobs Ladder Assembly VMC1840...........Ladder Strap, Sold Individually
Ultimate Bell Crank Throttle Linkage Kits The King throttle linkage kit relies upon two billet aluminum bell cranks with plenty of adjustment holes to get the linkage geometry just right. Swaged radius rod links have right and left hand threads for maximum adjustment. Part No.
Description
VMC2005...........Ultimate Bell Crank Throttle Kit With Steel Heims VMC2010...........Ultimate Bell Crank Throttle Kit With Aluminum Heims VMC2015...........Throttle Linkage Rod, 15" VMC2020...........Throttle Linkage Rod, 11" VMC2025...........Throttle Linkage Rod, 5-1/2" VMC2030...........Rod End, Steel, RH, 10-32 VMC2035...........Rod End, Steel, LH, 10-32 VMC2040...........Rod End, Aluminum, RH, 10-32 VMC2045...........Rod End, Aluminum, LH, 10-32 VMC2050...........Jam Nut, Steel, RH, 10-32 VMC2055...........Jam Nut, Steel, LH, 10-32
Ultra-Lite Aluminum Bell Crank VMC2060 Profile machined from 6061 billet for optimum strength, the Ultra-Lite has three adjustment holes on the short stem and five on the long stem for plenty of adjustment options and proper geometry. A super slick bearing is pressed in and carefully crimped to hold it secure.
Aluminum Left Front Caliper Mounts
Billet Throttle Arm VMC2065
2024 aluminum alloy mounts are machined with an arched bridge to keep the caliper true and straight for maximum braking power. Available for 10" and 11" rotors.
Completely redesigned for maximum strength and lighter weight, CNC-machined arm is available for 5/16" throttle shafts and works on Hilborn, Kinsler and Engler injectors. Arm is anodized and includes stainless steel hardware.
Part No.
Description
VMC2410...........Left Front Caliper Mount, 10" Rotor VMC2415...........Left Front Caliper Mount, 11" Rotor
Rear End Thread Repair Kit VMC2535 Repair threads in rear end snout with these industrial style threaded inserts that install like Heli-Coils.
Replacement Threaded Inserts VMC2540 Six to a package, inserts work with the Thread Repair Kit VMC2535.
Rear End Saver VMC1630 Rather than bending, breaking or pulling threads out of the snout in a crash, the Saver will break, bend or sacrifice threads to save the snout. Save over $500.00 the very first crash.
209-224OW10.indd 209
Billet Down Nozzle Filter Kit VMC1990 Kit has optimum atomization with no dirt and debris. The low profile prevents breaking which is common on longer filters. Set of eight.
Billet Nozzle Plugs VMC1920 Plug off ports in the nozzles or in the injection unit. 1/2"-20 threads are sealed with an O-Ring and the plugs are black anodized aluminum with dimple machined heads. Eight per set.
2010
209
11/10/09 10:52:14 AM
FORMERLY
Billet Fuel Block With Fittings VMC1930
Fabricated Aluminum Valve Covers With Crossover VMC2105
Unique block has three -6AN male fittings out the top with one -8AN fitting out the end for a return line. The big difference with the King block is that there is another -6AN port at the other end to create a double high speed system. Black anodizing prevents corrosion.
Small block Chevy fabricated covers are heli-arced and have billet aluminum gasket rails that have been relieved to clear jumbo style pushrods. Low profile design will allow engine to fit down between downtubes without removal of valve covers.
Splined Rear Wheel Centers Aerospace alloys and reinforced strengthening web design make these wheels some of the strongest on the market. Machined and perfectly broached to fit Winters, DMI and Frankland rear axles. Available in gold and silver. Part No.
Description
VMC2200 ..........Splined Rear Wheel Center - Gold VMC2205...........Splined Rear Wheel Center - Silver
Tubular Chromoly Rear Nose Wing Mounts VMC2350 Made from 4130 chromoly, mounts are heli-arc jig-welded and will bolt from the shock tower to the nose wing side board. These will help clean up air flow beneath the nose wing. Sold in pairs.
Super Flow High Speed Checker VMC1900 Today’s high pressure fuel systems need accurate gauges. The large, 4" gauge on the checker reads to 160 PSI and when combined with the billet aluminum distribution block and the easy flow handle, makes the combination unbeatable.
Quick Release Transponder Mount VMC2600 More and more tracks are using transponders to keep track of car positions during a race and King has developed the perfect companion piece: their Quick Release Transponder Mount. The black anodized, billet aluminum mount clamps on a 1" diameter chassis tube and includes a hairpin clip for quick mounting and dismounting.
Honeycomb Radiator Protector VMC2620 Eliminate the problem of bent radiator fins with King’s honeycomb radiator protector. All the top Outlaw teams rely on this piece to keep radiators doing what they are designed to do, cooling expensive race engines. The protector also makes clean-up of the radiator an easy proposition, just remove, hose it off and reinstall.
Honeycomb Radiator Protector Mounts VMC2625 Sold in pairs
High Speed Checker VMC1905 Large 2-1/2" liquid-filled gauge ensures exact, repeatable readings. The American-made Parker Regulator is adjustable to reproduce exact fuel system functions.
Dual Gauge Leakdown Tester VMC1915 The dual gauge setup repeats each and every time to pinpoint any problem. Features include two Parker USA regulators, black anodized 14mm spark plug adapter and aircraft quality hardware.
Kinsler IRL High Speed Bypass Mount VMC2605 Easily mount high speed bypass with this aluminum bracket. May be installed with hose clamps or tie wraps.
210
2” Aluminum Brake Pad Spacers VMC2420 Laser Cut Aluminum and designed to keep the caliper piston from extending out and causing uneven brake pressure. This design works in Wilwood’s newly designed caliper and with its older design. Spacers are .050" thick. Sold individually.
Steel And Aluminum Brake Line Quick Disconnects A 100% dry brake coupling, King Quick Disconnects allow connecting and disconnecting of brake fittings with no chance of air entering the system. Ethylene-Propylene seals will last and the hard anodized, billet aluminum fittings can take a real beating. Use female and male together. Sold separately. Part No.
Description
VMC2435
VMC2425...........Male Steel Brake Line Disconnect VMC2430`..........Female Steel Brake Line Disconnect VMC2435...........Male Aluminum Brake Line Disconnect VMC2440...........Female Aluminum Brake Line Disconnect
VMC2440
2010
209-224OW10.indd 210
11/10/09 10:52:37 AM
FORMERLY
Kevlar Brake Lines There is nothing tougher than Kevlar when it comes to a material for bulletproof brake lines. Extremely flexible, King Kevlar brake lines have crimped on collars with -3AN straight aluminum ends. Four lengths are available: 15", 18", 21" and 24". Part No.
Description
VMC2441...........-3AN Kevlar Brake Line, 15" VMC2442...........-3AN Kevlar Brake Line, 18" VMC2443...........-3AN Kevlar Brake Line, 21" VMC2444...........-3AN Kevlar Brake Line, 24"
Super Flex Floating Front Motorplate VMC1505 The floating front motorplate is made of billet aluminum and designed to pivot so the chassis can flex and drive harder off the rear tires. Two tapered Allen head bolts mount the rear horse shoe to the engine and two aluminum 3/8" spacers take up the offset from the horse shoe. A 4130 spherical bearing eliminates binding and black anodizing adds protection.
Billet Aluminum Solid Front Motor Plate VMC1500
4130 Chromoly Tubular Rear Wing Tree VMC2300 4130 chromoly tubular rear wing tree features 3/4" O.D. material and it’s heli-arc welded in a jig fixture to insure each one is exactly the same. Telescoping inserts make this wing tree fully adjustable, making height changes simple. The wing ram tab is welded into place and the welded center gives it optimal strength. Replacement Parts And Accessories Part No.
VMC2305 VMC2310
Description
VMC2305...........Replacement Tubular Insert, Sold Individually VMC2310...........Wing Tree Quick Pin Kit
Inboard Caliper Bolt Retainer Kit VMC2235 Inboard caliper bolt retainer kit stops those inboard caliper bolts from backing out. This unique kit is completely lazer cut for precise fit. The kit includes a dog bone that goes on first bolt and also acts like a washer, then thread bolts into the rear end side bell. Once they are tight into the side bell, clock the bolts so the retainer will slide over the hex of the bolt. Install the button head safety spring and it’s done. Installs in seconds!!
Black anodized plate is made from 6061 aluminum
Splined Right Rear Rotor Mount VMC2230 Tired of always having trouble getting that right rear rotor on and off. Well, here is a fix. This right rear rotor mount will let you use any left front rotor on it. No matter if the rotor is bent or warped this mount will slide on and off with no problems. Made from aircraft 6061 T-6 aluminum.
Plastic Sprint Car Plug Kit Here is a kit that does it all from the injectors to the brake lines. All caps and plugs have “AN” threads and will plug and seal off any and all lines on your car. Great for storing a motor or just preventing any contamination. The 72-piece kit has from -3 thru -12 along with the magneto plug and injector stack port plugs. Part No.
Hex Rear End Plug Kit VMC2225 Hex rear end plug kit makes ring and pinion inspections and filling the rear end a breeze. Made from 6061 T-6 material with a 1" hex for easy installation and removal. Fully machined on the inside for added weight savings. Sold in Pairs
Aluminum Rear End Cover Nuts VMC2220 Aluminum rear cover nuts are truly some of the nicest rear cover nuts on the market today. Nuts are manufactured from 9/16" billet aluminum hex, precisionally machined, drilled all the way through and then radius machined in the head for optimal weight savings.
Master Cylinder Return Spring Kit VMC2400 Made to keep the driver from burning the brakes off the car. A high strength zinc coil spring with an anodized black billet retainer makes this one of the nicest master cylinder return spring kits on the market.
Description
VMC2145...........For 2-3/16" Injector Stack Ports VMC2146...........For 2-7/16" Injector Stack Ports VMC2147...........For 2-1/2" Injector Stack Ports VMC2148...........For 2-5/8" Injector Stack Ports VMC2149...........For 2-13/16" Injector Stack Ports
Thermal Hood Blanket VMC2610 There is nothing harder on a motor than running it cold. This thermal hood blanket will help keep your motor up to racing temperature and protect that expensive engine. Easily installs in seconds.
Tail Tank Cooler VMC2615 Methanol makes more power the cooler it is, and that’s why King Racing Products has come up with this tail tank cooler. Made from reflective aerospace material to block out the heat and keep your methanol cool. One size fits all and is a handy item to have in those hot summer months!!
2010
209-224OW10.indd 211
211
11/10/09 10:53:03 AM
FORMERLY
Chromoly Tubular Brake Pedal And Gas Pedal
Torque Tube And Drive Shaft Checker VMC2560
Pedals are constructed from 4130 chromoly and precision heli-arc jig welded. Designed to eliminate flex, pedals provide optimal driver feel and comfort. Available for standard or raised rail cars. Pedals are finished off with a bright nickel plated finish.
Quickly determine if a shaft or tube is bent. A must for any sprint or midget team. Anodized aluminum construction.
Part No.
Torsion Bar Reamer For Sprint Car VMC2500
Description
VMC2075...........Tubular Throttle Pedal VMC2455...........Raised Rail-Brake Pedal VMC2460...........Standard Rail Brake Pedal
Tool is built for accuracy and the heart of the reamer is a 1-1/8" tool steel industrial cutter. The stem is designed to come apart for easy storage and the handle end is machined with a 3/4" hex to easily cut through bushings.
Nut and Washer Kits These are always hard to find items when you need them. Steel nut kit includes (30) 1/4", (25) 5/16", (20) 3/8", (15 ) 7/16", (15) 1/2" and are in an injection molded carrying case. Part No.
Safety Wire Drill Jig VMC2505
Description
VMC2700...........Steel Nut Kit, 105 pieces VMC2710...........Jet Nut Kit, 40 Pieces VMC2720...........Stainless Steel Washer Kit, .030", 145 Pieces VMC2725...........Stainless Steel Washer Kit, .060", 145 Pieces
VMC2700
Billet aluminum fixture will allow drilling of bolts from 10-32 to 3/4". Two supplied Allen bolts are pre-drilled and hold the hex of the bolt in place.
Rear Arm And Radius Rod Builder VMC2530 Build and duplicate all radius rods for replacement of damaged ones without having to re-square front or rear end. Anodized aluminum construction.
Oval Track Digital Tachometer VTA700810 Backlit digital tachometer records maximum and minimum RPM, displays two complete lap time results at a time, calculates and displays best lap out of a session and stores up to 30 laps. Tach does not record under yellow flag and will work with both 4 and 8 cylinder engines with a magneto or distributor. Tachometer includes slide mount bracket and wire harness. Replacement Components Part No.
Description
VTAR700802......Wire Harness VTAR700810......Slide Mount Bracket
Tom Miller
212
Photo: Skip Konkle
Jesse Hockett
Photo: Jim DenHamer
2010
209-224OW10.indd 212
11/12/09 11:56:40 AM
NEW VENDOR
Standard Sprint Fuel Pumps
Adjustable Check Valves
Engineered to endure the punishment of competitive sprint car racing, Standard sprint pumps use fully CNC-machined, billet aluminum housings that are fitted with machined steel shafts and precision lapped gears. Pumps include an adjustable flange that allows easy rotation and alignment after the unit has been mounted. Simply re-tighten the flange clamp after the pump has been properly WAT250400M positioned. Pumps are available in 400, 450 and 500 GPH versions, and are also offered with incorporated manifolds to simplify plumbing.
Waterman's check valves allow adjusting fuel pressure without having to disassemble the unit. Simply insert a 1/4" Allen wrench into the unit and rotate to raise or lower pressure. High speed model is the most versatile unit available, allowing fuel to come through the jet before the poppet, providing immediate and precise fuel metering.
Part No.
Inline -6AN Fuel Filter WAT304400-6
Description
WAT250400 .......Standard 400 Sprint Fuel Pump WAT250400M ....Standard 400 Sprint Fuel Pump With Manifold WAT250450M ....Standard 450 Sprint Fuel Pump With Manifold WAT250500 .......Standard 500 Sprint Fuel Pump WAT250500M ....Standard 500 Sprint Fuel Pump With Manifold
Description
WAT766210 .......Adjustable Check Valve, Low Speed WAT766220 .......Adjustable Check Valve, High Speed
Fuel Filter features a durable billet aluminum housing that is fitted with a fully cleanable, 100 micron stainless steel element. Offered in -6AN only.
Ultra Lite Fuel Pumps Includes all of the premium components common to the Standard units with the added performance benefits of maximum internal and external lightening. Ultra Lite pump housings have been fully scalloped and the shafts have been rifle bored to remove as much weight as possible without sacrificing durability. Choose from 400 or 500 GPH versions. Part No.
Part No.
Description
WAT200040 .......Ultra Lite 400 Sprint Fuel Pump WAT200050 .......Ultra Lite 500 Sprint Fuel Pump
Sprint Pump 3-Port Manifold WAT252000MF Three-port style, billet aluminum manifold converts Standard Sprint fuel pumps to manifold style, easing and simplifying plumbing. Not compatible with Ultra Lite model fuel pumps.
Main Jets (Pills) O-ringed, drop-in jets feature an entry that is tapered down to the final jet size with superior consistency, eliminating any possible disruption of fuel flow. Part No.
Size
Part No.
Size
WAT550100-OR-50 WAT550100-OR-52 WAT550100-OR-54 WAT550100-OR-56 WAT550100-OR-58 WAT550100-OR-60 WAT550100-OR-62 WAT550100-OR-64 WAT550100-OR-66 WAT550100-OR-68 WAT550100-OR-70 WAT550100-OR-72 WAT550100-OR-74 WAT550100-OR-76
.050" .052" .054" .056" .058" .060" .062" .064" .066" .068" .070" .072" .074" .076"
WAT550100-OR-78 WAT550100-OR-80 WAT550100-OR-82 WAT550100-OR-84 WAT550100-OR-86 WAT550100-OR-88 WAT550100-OR-90 WAT550100-OR-92 WAT550100-OR-94 WAT550100-OR-96 WAT550100-OR-98 WAT550100-OR-100 WAT550100-OR-102 WAT550100-OR-104
.078" .080" .082" .084" .086" .088" .090" .092" .094" .096" .098" .100" .102" .104"
Sprint Pump Swivel Flange WAT252900 Innovative, adjustable flange allows complete 360째 rotation of fuel pump, easing removal, installation and alignment. Manufactured from CNC-machined billet aluminum.
Quick Release Check Valve Assemblies Check valve assemblies feature high flow, full circle style poppet valves for effective sealing and minimum leakage. High pressure check valve uses brass poppet valve, while low pressure unit includes a billet aluminum valve. Part No.
Description
WAT766009A ............ Quick Release Check Valve, Low Pressure WAT766009B............ Quick Release Check Valve, High Pressure WAT7660QRHP
Jerry Caryer
Photo: Jim DenHamer
Fuel Shut-Off Valves Engineered specifically for Sprint applications, premium quality shut-off valves are offered in bulkhead or dash mount versions and include a third port, if needed. Dash mount model may be used with Allstar Performance ALL52115 Steering Mount. Part No.
Description
WAT935566B.....Fuel Shut-Off Valve, Bulkhead Mount WAT935566D.....Fuel Shut-Off Valve, Dash Mount
Aluminum Steering Mount ALL52115 WAT935566B
Allows convenient mounting of Waterman Fuel Shut-Off Valve #WAT935566D. SEE PAGE 22 FOR MORE INFORMATION
2010
209-224OW10.indd 213
213
11/12/09 11:47:12 AM
15" Direct Mount Rim Shells
15" Magnum Sprint Spline Cold-drawn, aluminum alloy rim halves are lighter and stronger than 6061-T6. CNC-machined, forged aluminum centers are splined, then gold anodized to stay looking like new. “Roll Forged” rim lips increase bead seat strength to withstand the most abusive racing conditions. Wheels exceed USAC wheel specifications for all racing series. Part No.
Size
Bolt Circle
Rear Spacing
Bead-Loc
WEL735-51414 WEL735-51415 WEL735-51416 WEL735-51425 WEL735-51435 WEL735-51525 WEL735-51526 WEL735-51535 WEL735-51536
15" x 14" 15" x 14" 15" x 14" 15" x 14" 15" x 14" 15" x 15" 15" x 15" 15" x 15" 15" x 15"
42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint
4.00" 5.00" 6.00" 5.00" 5.00" 5.00" 6.00" 5.00" 6.00"
WEL735-51655
15" x 16"
42-Spline Sprint
5.00"
WEL735-51656
15" x 16"
42-Spline Sprint
6.00"
WEL735-51755
15" x 17"
42-Spline Sprint
5.00"
WEL735-51746
15" x 17"
42-Spline Sprint
6.00"
WEL735-51747
15" x 17"
42-Spline Sprint
7.00"
WEL735-51756
15" x 17"
42-Spline Sprint
6.00"
WEL735-51757
15" x 17"
42-Spline Sprint
7.00"
WEL735-51812 WEL735-51813 WEL735-51815 WEL735-51825
15" x 18" 15" x 18" 15" x 18" 15" x 18"
42-Spline Sprint 42-Spline Sprint 42-Spline Sprint 42-Spline Sprint
2.00" 3.00" 5.00" 5.00"
WEL735-51855
15" x 18"
42-Spline Sprint
5.00"
None None None Outer Inner Outer Outer Inner Inner Outer With Cover Outer With Cover Outer With Cover Double With Cover Double With Cover Outer With Cover Outer With Cover None None None Outer Outer With Cover
Welded Rim Shell assemblies are guaranteed leak-free for tubeless applications. Part No.
Size
Bolt Circle
Rear Spacing
Bead-Loc
WEL860-50813 WEL860-50814 WEL860-50913 WEL860-50914
15" x 8" 15" x 8" 15" x 9" 15" x 9"
5 x 9.750" 5 x 9.750" 5 x 9.750" 5 x 9.750"
3.00" 4.00" 3.00" 4.00"
None None None None
15" Replacement Wheel Halves Part No.
Inner Wheel Halves WELP856-5558 WELP856-5658 Outer Wheel Halves WELP857-5514 WELP857-5614 WELP857-5814 WELP857-5914 WELP858-5044 WELP858-5124 WELP858-5144 WELP858-5214 WELP858-5244 WELP858-5224
Size
Rear Spacing
Bead-Loc
15" x 5.63" 15" x 6.63"
5.00" 6.00"
None None
15" x 5.25" 15" x 6.25" 15" x 8.25" 15" x 9.25" 15" x 10.25" 15" x 11.25" 15" x 11.25" 15" x 12.25" 15" x 12.25" 15" x 12.25"
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
None None None None With Dzus, No Cover Standard With Dzus, No Cover None With Dzus, No Cover Standard
15" Sprint Magnum Replacement Wheel Centers Part No.
Description
WELP613-7078 ........ 15" Sprint Magnum Spline Rear WELP613-7095 ........ 15" Sprint Magnum 6-Pin Lug Mount Center
15" Magnum Sprint 6-Pin Lug Mount
15" Bead-Loc Rings
Cold-drawn, aluminum alloy rim halves are lighter and stronger than 6061-T6. Newly designed, forged aluminum wheel centers are CNC-machined for perfect balance and accept all popular pressure plates. Gold anodizing maintains a “like new” finish. Wheels exceed USAC specifications for all racing series.
Part No.
Part No.
Size
Bolt Circle
Rear Spacing
Bead-Loc
WEL756-50813 WEL756-51014 WEL756-51015 WEL756-51016
15" x 8" 15" x 10" 15" x 10" 15" x 10"
6 x 5.0" Sprint 6 x 5.0" Sprint 6 x 5.0" Sprint 6 x 5.0" Sprint
3.00" 4.00" 5.00" 6.00"
WEL756-51055
15" x 10"
6 x 5.0" Sprint
5.00"
None None None None Outer With Cover
15" Sprint Car Ultra Hub Direct mount ultra hub is designed for dirt applications only. Part No.
Description
WELP650-5275 ........ 15" 16-Hole Bolt-On Bead-Loc Ring (Slotted) WELP650-5314 ........ 15" Bolt-On Bead-Loc Ring With Dzus-On Flange (No Cover) WELP650-5315 ........ 15" 16-Hole Bolt-On Bead-Loc Ring With Dzus-On Mud Cover
15" Mud Covers Part No.
Description
WELP650-4514A ...... Replacement Mud Cover Only, Aluminum
15" Sprint Car Direct Mount Hub Part No.
Description
WELC8088-LT ........... 15", Left WELC8088-RT .......... 15", Right
Description
WELC8088-LT3 ......... 15", Left WELC8088-RT3 ........ 15", Right
15" Replacement Parts Part No.
Description
WELP650-3013 ........ Threaded Insert Kit (16) WELP650-4600 ........ Dzus And Washer Repair Kit (12 Each)
214
2010
209-224OW10.indd 214
11/10/09 10:54:54 AM
Forged Billet Dynapro Narrow Mount Calipers NEW! Upgrade or replace Narrow Mount Dynalite series calipers. NDP calipers are stress-flow forged aluminum with center bridge bolts to resist separation. Calipers are fitted with stainless steel pistons and stainless steel SRS bridge plates, and use 7816 pads. Part No.
Piston Diameter
Rotor Thickness
Piston
Square Ring Kit
Bleed Screw
Body Seal
Pad Type
WIL120-9734-SI* WIL120-9736-SI* *SI Designates Side Inlet.
1.75" 1.75"
.380" .810"
WIL200-7531 WIL200-7531
WIL130-2655 WIL130-2655
WIL220-0627 WIL220-0627
WIL210-2582 WIL210-2582
7816 7816
Billet Narrow Mount Dynapro Calipers DynaPro four piston radial mount calipers combine pure race technology with a new generation of Wilwood performance enhancements. The DynaPro combines the versatility of radial mounting with a sleek profile, superior strength, and extreme durability in adverse conditions. With an overall weight as light as 3.58 pounds. Part No.
Application
Piston Diameter
Rotor Thickness
4-Pc. Bleed Kit
4-Pc. Square Ring Kit
Mount
1.75"
.810"
WIL220-0627
WIL130-2655
WIL250-9595
WIL120-8544-SI* Rear Inboard *SI = Side Inlet
Forged Billet Superlite (FSL) Calipers Forged billet Superlite (FSL) includes stainless steel bridge plates, stainless steel or Thermlock pistons, and high temp, square-faced O-ring seals. Specify right (R) or left (L) when ordering. Part No.
Piston Diameter
Rotor Thickness
Piston
Crossover Tube
Bleed Screw Kit
Bridge Bolt Kit
Square Ring Kit
Pad Type
.810"
WIL200-7531
WIL190-5973
WIL220-6069
WIL230-7539
WIL130-2655
7420
WIL120-7430-SI* 1.75" *SI designates side inlet.
GP 320 Calipers NEW! The GP 320 billet four piston caliper is a compact, high efficiency performer. Weighing just 1.70 pounds, it was purpose built as an upgrade with increased pad size over two piston calipers on lightweight open wheeled racecars. The GP 320 is also well suited to other performance and racing applications including, but not limited to karts, motorcycles, mini-sprints, and formula sports racers. The GP 320 bridge configuration will accommodate rotors between .19" and .25" thick, with overall diameters between 9.00" and 11.50". Part No.
Application
WIL120-8524 Right Rear WIL120-8525 Left Rear
Piston Diameter
Rotor Thickness
4-Pc. Bleed Screw
4-Pc. Sq. Ring Kit
1.25" 1.25"
.235" .235"
WIL220-7496 WIL220-7496
WIL130-3602 WIL130-3602
Forged Billet DynaPro Lug Mount Calipers Designed for applications that previously used Dynalite model brake calipers. DynaPro calipers are stressflow forged for exceptional strength and include a wide array of improvements. Calipers feature Quick-E-Clip pad retainers, which eliminate the need for caliper removal when replacing pads, while the heavy wall stainless steel pistons slow heat transfer and resist corrosion. Internal fluid passages and four corner bleed screws allow mounting in front, rear, left or right position. Use 7812 type pads. Part No.
Piston Diameter
Rotor Thickness
WIL120-9693-SI* 1.75" .81" *Signifies Side Inlet Which Include Addition Of Center Bridge Bolts.
Piston
4 Pc. Bleed Screw Kit
4 Pc. Square Ring Kit
Pad Type
WIL200-7528
WIL220-0627
WIL130-2655
7812
Billet Dynalite Single Calipers Black anodized aluminum two piston caliper is ideal for open wheel racing. With 3.25" lug spacing, it weighs just 1.4 lbs. and secures a .49" thick, 1.1" cu. in. brake pad with exclusive pad retainer clips. Internal fluid passages and multiple bleed fittings permit right or left, front or rear mounting. Will fit .250" to .380" thick rotors with diameters from 6.00" to 13.00". High temperature square piston seals control retraction and stainless steel, deep cup pistons reduce heat transfer from pad to brake fluid. Calipers accept 1/8"-27NPT inlet fittings and use 7012 type pads. Part No.
Description
Piston Diameter
Rotor Thickness
Piston
4-Pc. Ret. Pin Kit
4-Pc. Bleed Kit
4 Pc. Sq. Ring Kit
WIL120-10188
Billet Dynalite Single, 3.25" Spacing
1.75"
.380"
WIL200-7528 (1.75")
WIL180-3862
WIL220-0627
WIL130-2655
2010
209-224OW10.indd 215
215
11/10/09 10:55:18 AM
PolyMatrix Brake Pads Wilwood has many types of brake pad compounds designed specifically for racing. It is important to analyze braking requirements and select the proper pads. Experimentation is often necessary to determine the correct compound for a particular application. PolyMatrix “A” Compound Heat Range: Low to X-High, Torque: X-High “A” compound delivers an immediate cold response with the highest friction values at all temperatures. Engineered for severe duty oval track race applications which require immediate high response at low temperatures.
PolyMatrix “E” Compound Heat Range: Medium to High, Torque: Medium to High A proven “Million Dollar” winner and the first choice for all types of dirt racing. “E” has immediate cold response, with consistent torque and pedal response through the entire temperature range. “E” has smooth engagement for finesse driving on slick tracks, with plenty of stopping power right from the start.
PolyMatrix “B” Compound Heat Range: High, Torque: High With quick warm-up, high friction and fade free performance at high temperatures, “B” is the best choice for sprints on pavement or dirt tracks with extreme braking. BP-10 (“Smart Pads”) Compound Heat Range: Medium to High, Torque: Light to Medium A medium to high temp compound, low dust characteristics and the low temperature response of a street pad. Use on dirt track cars with vented iron rotors, club sport and track day racers.
PolyMatrix “H” Compound Heat Range: Low to X-High, Torque: High to X-High Slightly softer initial response than “A” compound with the same high temperature friction. Severe duty compound has long wear characteristics and works well on oval track applications. Delivers smooth, consistent engagement at all temperatures and pedal pressures. PolyMatrix “Q” Compound Heat Range: Low to Medium, Torque: Medium Ceramic-enhanced compound is ideally suited for aluminum rotors. Provides smooth engagement, long service life, quick recovery and high fade resistance.
PolyMatrix Brake Pad Chart (Axle Sets, 4 Pads Per Set) Caliper Type
“A” Compound
“B” Compound
“BP-10” Compound
“E” Compound
“H” Compound
“Q” Compound
Ti Rotor
WIL15A-10142K WIL15A-5734K WIL15A-9835K WIL15A-5735K WIL15A-5938K
WIL15B-9819K WIL15B-3991K WIL15B-9836K WIL15B-3992K WIL15B-5939K
WIL150-9764K WIL150-8850K WIL150-9136K WIL150-8856K WIL150-8854K
WIL15E-9820K WIL15E-6096K WIL15E-9837K WIL15E-6100K WIL15E-6084K
– WIL15H-8291K – WIL15H-8108K WIL15H-8114K
WIL15Q-10144K WIL15Q-6824K – – WIL15Q-6829K
WIL150-9756K – – – –
WIL15A-7263K WIL15B-7264K WIL150-8946K
WIL15E-7266K
–
–
WIL150-10290K
–
WIL15H-8596K
–
–
Pad Type
Billet Dynalite Single 6812 Dynalite (Cotter Pin) 7112 Billet Dynapro Lug Mount 7812 Superlite II, III 7320 Superlite 6 & Forged S/L 7420 Billet Dynapro 7816/7216 Narrow Mount/Billet NDL GP320 6211
–
–
–
Pad Types
6211
6812
7112
7320
7420
7812
7816/7216
DynaPro Inboard Brake System WIL140-9751 System is for Sprint quick change rears with 3.00" x 46-spline axles. Includes 10.5" x .810" polymetallic titanium vented rotors (2.37 lbs. each), dynamic mount rotor axle clamps and forged billet DynaPro radial mount calipers with metalic pads. Sold in pairs.
GP320 Sprint Brake Kits NEW! Brake kit offers substantially improved braking and durability when compared to traditional aluminum rotor systems. GP320 forged billet aluminum four piston calipers are rigid, yet lightweight and deliver exceptional braking torque, while the Polymetalic stainless steel rotors provide superior thermal performance and wear resistance. Kit is complete with caliper, brake pads, rotor, rotor adapter and necessary hardware. Part No.
Description
WIL140-10798 ......... Front Brake Kit WIL140-10799 ......... Right Rear, Left Front Kit
216
2010
209-224OW10.indd 216
WIL140-10798
Bryan Clauson
11/10/09 10:55:39 AM
Drilled Steel Rotors
Ultralight 32 Vented Rotors
Manufactured from a proprietary, high strength alloy, solid steel rotors have stability and resistance to warpage. Rotors are designed for open wheel applications that do not demand continuous thermal cycling or great cooling requirements. Fully blanchard ground rotors feature a lightweight, cross-drilled design for reduced unsprung rotating weight.
Ultralight Rotors are the popular choice for dirt track and lighter duty pavement racing. Premium grade, long grain carbon iron provides excellent thermal stability, long life, and resistance to heat checking. UL-32 rotors are available with straight or directional vanes for improved cooling.
Part No.
Rotor Thk.
WIL160-2084 .301" WIL160-5538 .350"
Rotor Dia.
Mount Holes
11.00" 12.19"
3 8
Bolt Hole
Bolt Weight Circle Application (Lbs.)
.500" 5.00" Dynamic 7.00"
Front Rear
4.7 4.6
UL-32 Straight Vane Rotors Part No.
WIL160-0277 WIL160-0471
WIL160-3411
Rotor Thk. Rotor Dia.
.81" .81"
12.19" 11.75"
No. Of Mt. Holes
8 8
Bolt Hole Type Circle
Thru Thru
Weight
7.00" 8.9 Lbs. 7.00" 8.1 Lbs.
3-Hole Front Mount Steel And Aluminum Rotors 3-hole mount aluminum rotors are precision CNC-machined from high strength billet plate. Full symmetrical machining provides perfect balance, perfect flatness, and the truest rotation of any rotor being built. These rotors fit the popular 3 x 5.00" mount circle found on most sprint and midget front hubs. A durable black anodized finish prevents corrosion and simplifies the visual inspection of the contact faces. The best results are always achieved using Wilwood purple brake pads with these rotors. Part No.
ULD-32 Drilled Straight Vane Rotors Part No.
WIL160-5863 WIL160-5865
Description
WIL160-2084 ..............310", 11" x 5", Front Steel WIL160-3327 ..............310", 10.95" x 5", Front, Aluminum WIL160-3411 ..............310", 10.20" x 5", Front, Aluminum WIL160-3458 ..............310", 10.25" x 5", Front, Steel WIL160-10475 ............310", 11", Lightweight Steel
Rotor Thk. Rotor Dia.
.81" .81"
11.75" 12.19"
No. Of Mt. Holes
8 8
Bolt Hole Type Circle
Thru Thru
Weight
7.00" 7.2 Lbs. 7.00" 8.0 Lbs.
WIL160-10475
Splined Axle Mount Aluminum Rotors Splined axle mount aluminum rotors are manufactured from the same high strength billets with the same precision as our three-hole mount front rotors. Full symmetrical machining provides perfect balance, perfect flatness and the truest rotation of any aluminum rotor being built. A durable black anodized finish prevents corrosion and simplifies the visual inspection of the contact faces. The best results are always achieved using Wilwood purple brake pads with these rotors. Part No.
Rotor Dia.
Rotor Thk.
Bolt Circle
Weight
WIL160-3270 WIL160-3275
10.29" 10.95"
.310" .310"
3" x 42 Spline 3" x 42 Spline
1.9 Lbs. 2.3 Lbs.
ULS-32 Scalloped Straight Vane Rotors Part No.
WIL160-8135 WIL160-8136
Rotor Thk. Rotor Dia.
.81" .81"
11.75" 12.19"
No. Of Mt. Holes
8 8
Bolt Hole Type Circle
Thru Thru
Weight
7.00" 5.4 Lbs. 7.00" 5.9 Lbs.
Rotor Bolt Kits Bolt kits fasten rotors to hubs or hats. Part No.
Description
WIL230-0150 .............Socket Head, Threaded Rotors, (8) 5/16"-24 x .750" WIL230-0526 .............Hex Head, Wide 5/Threaded Hats, (8) 5/16"-18 x 1.00" WIL230-5567 .............Dynamic Mount Kit, Live Axle Rotor Clamp, (8) 5/16"-24 x 1.25" Bolts & Crimp Nuts
Drilled Steel Rotors High strength steel alloy rotor has greater strength and resistance to warping and is drilled to reduce unsprung rotating weight. Part No.
Rotor Thk.
Rotor Dia.
No. Of Mt. Holes
WIL160-0525
.35"
12.00"
8
Bolt Hole Type Circle
.328"
Weight
7.00" 5.4 Lbs. Matt Lumbert
Photo: Doug Swift
2010
209-224OW10.indd 217
217
11/10/09 10:56:08 AM
Superlite Thermlock T1 Caliper Piston WIL200-7550 Thermlock technology, widely used in NASCAR Nextel Cup, Busch GN and Craftsman truck competition, is now offered on the Superlite brake caliper. Multi-piece piston manages heat to reduce thermal transfer under the most severe racing conditions. Use as a service replacement or an upgrade for stainless steel equipped or older calipers. Part No.
Description
Dia.
Length
Caliper Applications
WIL200-7550 WIL200-7551
Thermlock T1 Piston Thermlock T1 Piston
1.88" 1.75"
1.05" 1.05"
Superlite, LC-6T Superlite
Aluminum Master Cylinders High volume, die cast aluminum master cylinders have 26% more fluid capacity and include formed steel lids, bellows type gaskets, internal slosh baffles, and standard mounting dimensions. Description
Master Cylinder Part No.
Rebuild Kit Part No.
Replacement Lid And Gasket
3/4" Bore Master Cylinder 7/8" Bore Master Cylinder 1" Bore Master Cylinder
WIL260-6764 WIL260-6765 WIL260-6766
WIL260-6898 WIL260-6899 WIL260-6900
WIL330-7085 WIL330-7085 WIL330-7085
Combination Remote Master Cylinder Kits Mini Sprint/Kart 1/2" Bore Master Cylinder WIL260-5520 Super lightweight (0.55 lbs.) 1/2” bore aluminum master cylinder is designed for Mini Sprint and Kart racing. Unit is ready to install and includes an adjustable lever ratio, remote mount fluid reservoir, billet bracket, lockwired drilled hardware and fluid line fitting.
Residual Pressure Valves Valves prevent fluid drain-back when master cylinder is mounted below floor. Also prevent excessive piston retraction for firmer pedal. Aluminum housing is tapped for 1/8" NPT on inlet and outlet for easy installation. Valves with fittings include one 1-1/8"-27 double ended male fitting and one 1/8"27 male to 3/8"-24 female adapter fitting for a direct mount to master cylinder. Part No.
Description
WIL260-1874 ........... 2 Lb. Blue WIL260-3278 ........... 2 Lb. Blue, With Fittings
Knob Style Proportioning Valve WIL260-8419 Improved valve features a fine thread adjuster for precise pressure adjustments from 100-1,000 PSI. Unit can deliver up to 57% reduction in line pressure, the highest of any proportioning valve currently available. Compact, lightweight assembly has 1/8"-27 NPT ports and dual mounting holes. May be used to adjust front to rear, side to side or single wheel brake bias.
Lever Style Proportioning Valve WIL260-8420 Adjustable valve delivers precise pressure 100 to 1,000 PSI. Compact, forged aluminum valve can reduce in line pressure by as much as 57% at full release. Easily mounted with two .250" dia. holes on 1.00" centers. Includes 1/8"NPT inlet and outlet ports and 1/8" NPT to 3/8"-24 brake line adapters.
Each kit includes master cylinder with 3/8"-24 UNF outlets, large (10.7 oz.) and small (4.0 oz.) reservoirs, remote mounting bracket, remote inlet adapter, remote hose, reservoir cap and hardware. Note: Replacement Cap And Gasket Can Only Be Used Together. Description
Master Cylinder Part No.
Rebuild Kit Part No.
5/8" Master Cylinder Kit, 1.3" Stroke 3/4" Master Cylinder Kit, 1.1" Stroke 7/8" Master Cylinder Kit, 1.2" Stroke 1" Master Cylinder Kit, 1.0" Stroke 1-1/8" Master Cylinder Kit, 1.0" Stroke
WIL260-3372 WIL260-3374 WIL260-3376 WIL260-3378 WIL260-3380
WIL260-3880 WIL260-3881 WIL260-3882 WIL260-3883 –
Combination Master Cylinder Kits Offering up to four combinations from one kit, the ultra-compact, lightweight master cylinder is ideal for sprints, midgets and a host of other high performance applications. Master cylinder may be remotely or directly mounted using small or large reservoirs. Compact size offers up to 2" additional clearance between flange and outlet. Close tolerance cut-off and equalization ports assure immediate activation and heavy internal return springs offer smooth operation and quick release. Part No.
Description
WIL260-10371 ......... 5/8" Master Cylinder Kit WIL260-10372 ......... 3/4" Master Cylinder Kit WIL260-10374 ......... 7/8" Master Cylinder Kit WIL260-10375 ......... 1" Master Cylinder Kit
Caliper Fittings Premium quality Caliper Fittings are designed to fit and work the first time, every time. Part No.
Description
WIL220-0627 ........... Bleed Screw Assembly 1/8"-27 (4-Pack) WIL220-0628 ........... Tube Adapter (4-Pack) WIL220-0842 ........... 90° Inlet Fitting, 1/8"-27 to -4
Caliper Shims Use shims to adjust calipers for proper rotor positioning and clearance. Sold in packs of 10. Part No.
Description
WIL240-4384 ........... 0.032" Thick, 3/8" I.D. Hole WIL240-4385 ........... 0.032" Thick, 7/16" I.D. Hole WIL240-4386 ........... 0.063" Thick, 7/16" I.D. Hole WIL240-4387 ........... 0.015" Thick, 7/16" I.D. Hole
218
2010
209-224OW10.indd 218
11/10/09 10:56:43 AM
Quick Check Pressure Gauge WIL260-0966 Enables accurate master cylinder and brake bias set-up. Easy to read 0-1500 PSI gauge installs in place of brake caliper bleed screw.
Forged Piston Sets Wiseco Pistons are furnished with 1/16", 1/16", 3/16" ring grooves (unless noted), 4140 chrome moly wrist pins, spiral locks, and ring groove spacers (when necessary). Part No.
Quick Release Steering Hub WIL270-2016 Lightweight, billet aluminum housing with springloaded release has a non-removable pin and a precise hex bore for close-tolerance fit. Satin black hub has a three-bolt mount pattern and shaft adapter for 3/4" tubing.
Hi-Temp 570° Racing Brake Fluid WIL290-0633 Brake fluid has a dry boiling point of 570°F - over 150° higher than DOT 3 requirements, and over 100° higher than DOT 4 requirements. Lubricates and cleans brake system’s internal parts. Low viscosity makes bleeding brakes an easy operation. Eliminates aeration of brake fluid (foaming from excessive pumping of the pedal). Sold in hermetically sealed 12 oz. containers to prevent unwanted moisture absorption. Not sold in larger containers because unused portions can become contaminated with moisture. Ground Shipment Only
EXP 600 Plus Super Hi-Temp Racing Brake Fluid WIL290-6209 Wilwood’s EXP 600 Plus, a low viscosity blend, was developed and refined to withstand the high heat and extreme pressure demands of professional motorsports. Its superior high performance rating of 626°F far exceeds minimum DOT3 and DOT4 requirements. EXP 600 Plus exhibits unmatched low moisture affinity. Its non-aeration and compression characteristics translate into solid pedal feel, immediate response, high heat protection and maximum service life, long after others have failed. 16.9 oz. containers. Ground Shipment Only
Bore
Stroke
23° 400 Solid Dome WISK051A3 4.155" 3.750" WISK056A3 4.155" 4.000" WISK071AS 4.125" 3.562" WISK071A3 4.155" 3.562" 18° 400 Solid Dome/Stroker WISK170AS 4.125" 3.750" WISK170A3 4.155" 3.750" WISK171A3 4.155" 4.000"
Rod Length
“O” Deck Height At
Comp. Height
Dome Volume
6.000" 6.000" 6.125" 6.125"
8.995" 9.000" 8.966" 8.966"
1.120" 1.000" 1.060" 1.060"
+10.0cc +10.0cc +10.0cc +10.0cc
6.000" 6.000" 6.000"
8.995" 8.995" 9.000"
1.120" 1.120" 1.000"
+4.0cc +4.0cc +4.0cc
Wrist Pin Retainers WISCS-24 Replacement, three-layer spiral locks fit small block Chevys with .927" dia. wrist pins. Retainers are .075" thick x 1.010" free O.D. and sold in pairs.
Racing Oil Filters Wix racing oil filters use "glass enhanced" cellulose media, to capture particles as small as 10-12 microns, removing up to 94% more dirt than traditional filters. Many filters include built-in bypasses to maintain oil pressure even under heavily clogged conditions. Part No.
Application
Height
Dia.
Thread Size By-Pass Rate
Flow
WIX51060R WIX51061R WIX51069R WIX51222R WIX51515R WIX51794R WIX57003R WIX57007R
Chevy Late GM Chevy Remote Mount Chrysler/Ford Chevy Remote Mount Remote Mount
5.170" 5.178" 4.330" 6.210" 5.170" 7.820" 6.210" 5.900"
3.600" 3.660" 3.600" 4.600" 3.600" 3.600" 4.600" 4.200"
13/16"-16 None 13/16"-16 None 13/16"-16 None 1-1/2"-12 18-22 PSI 3/4"-16 8-11 PSI 13/16"-16 None 1-1/2"-12 18-22 PSI 1-1/2"-16 18-22 PSI
28 GPM 28 GPM 28 GPM 28 GPM 28 GPM 28 GPM 30 GPM 30 GPM
NEW VENDOR
Small Block Chevy Racing Spark Plug Wire Sets WDYS817 Manufactured by Phillips Racing Wire, Woody Wires feature a silicone jacket covered with fiberglass braided EPDM insulation and an Aramid fiber core coated with conductive latex, spiral-wrapped in stainless steel. The resulting wire has the conductivity and performance of a metal core, but still suppresses radio interference. Small block Chevy HEI around-back wires listed include 90° boots at distributor and spark plug ends.
Chevy Spin-On Oil Filter Conversion Kit WIX24061 Convert 1956-67 Chevy V-8's from OEM canister type to spin-on oil filter. Includes base, gasket, mounting bolts and instructions.
Inline Fuel Filter WIX24003 High flow, inline fuel filter assembly is 2-3/16" O.D. x 11" long and includes a replaceable 7 micron paper element. Compatible with gasoline or alcohol, filter has 3/4" NPT inlet and outlet ports and a flow rate of 12 GPM. Related Component WIX24004..........Replacement Element
2010
209-224OW10.indd 219
219
11/10/09 10:57:05 AM
“Pro Eliminator” 10" Ring Gear/12-Bolt Quick Change Rear End Assemblies Magnesium, open tube assemblies have 10" ring gears with integral right side bell, shifter, Posi-Lock assembly (WIN8104), aluminum axle (WIN8122), sealed front bearing (WIN8141), pinion nose roller bearing (WIN8143), gear cover (WIN8185), and lightweight side bells (WIN8185) unless otherwise specified. For special orders see chart. Part No.
Description
R&P Ratio
Included Options
WINK837S-S1 “Pro Eliminator” Assembly WIN8104, WIN8106, WIN8141, WIN8143, WIN8153, WIN8185, WIN8216, WIN8163 WINK837S-S2 “Pro Eliminator” Assembly WIN8104, WIN8122, WIN8141, WIN8143, WIN8185, WIN8216 WINK837S-S5 “Pro Eliminator” Assembly WIN8104, WIN8106, WIN8116, WIN8122, WIN8137, WIN8141, WIN8143, WIN8163 WINK837S-S6 “Pro Eliminator” Assembly WIN8104, WIN8116, WIN8122, WIN8137, WIN8141, WIN8143, WIN8163, WIN8208, WIN8153 Options for “Pro Eliminator” Quick Change Part No.
Description
Part No.
Description
Part No.
Housing Housing Width Offset
4.11 4.86 4.86 4.11
52" 52" 52" 52"
1" 1" 1" 1"
Description
WIN8104 .......... Posi-Lock Assembly WIN8127 ..........Titanium Thru-Bolts WIN8147.......... Lightweight Side Bells WIN8106 .......... Heat Treated Lower Shaft WIN8128 ..........Titanium Lower Shaft WIN8150.......... Titanium Shifter Shaft WIN8116 .......... Bushing In Lower Shaft WIN8137 ..........Heavy Duty Gear Cover WIN8153.......... Lightweight Aluminum Axle WIN8118 .......... Double Row Bearing Carriers WIN8141 ..........Special Front Bearing WIN8158.......... Splined For Brake Mount WIN8122 .......... Aluminum Axle WIN8143 ..........Roller Bearing on Pinion Nose WIN8185.......... Lightweight Heavy Duty Gear Cover Note: A Complete Exploded View And Breakdown Of All Component Parts Can Be Seen On The Following Page.
Swivel Splined Conversion Kit WIN3942-03
Ring And Pinion Assemblies
NEW!
Gear sets fit popular 10" dia., 12-bolt quick change rear ends. Available with or without bearings.
Installation kit with gun drilled steel drive shaft.
Ratio
Part No. Without Bearings
Part No. With Bearings
4.11 4.86
WIN5714 WIN5400
WIN5715 WIN5401
Lower Shafts Designed for use on 10" full size quick change rear ends.
Quick Change Accessories Part No.
Part No.
Description
WIN6678-03 ............. Heat Treated Lower Shaft, Internal Coupler WIN6249HT .............. Heat Treated Lower Shaft, Standard Coupler
Description
WIN6115 .................. Sprint Shim Kit, 9 Pcs. WIN7403T ................ O-Ring, 10" Open Tube Side Bell WIN7433 .................. O-Ring Seal, 10" Open Tube WIN7521 .................. Gear Cover Bearings, Pair
Thru Bolt Kit WIN5218 Kit contains ten 7/16"-20 x 5-1/2" thru bolts, washers and lock nuts.
Open Tube Breather Assembly WIN2966 Provides a vent for open tube rear end assemblies. Includes O-ring boss -6AN breather fitting, breather adapter plug, O-ring and 16" of poly tubing.
Sprint/Midget Closed Driveline 1. Snap Ring (Integral 10-10 Coupler) 2. Front Bearing (Integral 10-10 Coupler) 3. Integral 10-10 Coupler 4. Internal Snap Ring (Integral 10-10 Coupler) 5. Standard 10-10 Coupler 6. Driveshaft 10-16 Spline 7. U-Joint Assembly 8. Torque Tube And Collar 9. Collar (Bellhousing) 10. Torque Ball 11. Bellhousing
220
2010
209-224OW10.indd 220
11/10/09 10:57:37 AM
“Pro Eliminator” 10" Ring Gear/12-Bolt Quick Change Assembly Parts List No.
Description
1 Alum. Sprint Center (Add “S” To P/N For Shifter) 1 Magnesium Sprint Center (Add “S” To P/N For Shifter) 2 Std. Magnesium Right Side Bell 2 Lt. Weight Magnesium Right Side Bell 3 Std. Magnesium Left Side Bell (With Caliper Mnt.) 3 Lt. Weight Magnesium Left Side Bell (w/Caliper Mnt.) 4 Shim Kit, Axle Bearing 5 Bearing Cone, Axle 6 Bearing Cup, Side Bell 7 O-Ring, Side Bell 8 O-Ring, Side Bell Seal 9 Seal, Side Bell 10 Internal Snap Ring, Side Bell Seal 11 Steel Live Axle 11 Alum. Live Axle 11 Lightweight Aluminum Live Axle 12 Ring Gear Flange, Axle 13 Ring And Pinion (Standard With 4.86 Ratio) 14 7/16"-20 x 5-1/2" Hex Head, Thru Bolt (9 For Shifter) 14A 7/16"-14 x 1-1/4 Hex Head, SCR. 15 7/16" SAE Flat Washer 17 7/16"-20 Flanged Locknut (9 For Shifter) 18 Magnesium Gear Cover 19 Gasket, Gear Cover 20 Ball Bearing, Gear Cover 22 #6 AN Port Plug With O-Ring (Socket Head) 22 #6 AN Port Plug With O-Ring (Hex Head) 23 3/8"-16 Alum. High Nut, Gear Cover 24 Quick Change Gear Set (Not Part Of Assembly) 25 3/8"-16 x 1" Hex Head, Retainer Plate 26 Retainer Plate, Pinion 27 Retaining Ring, Pinion 28 Posi Lock Retainer 29 O-Ring, Posi Lock Retainer 30 Posi Lock Nut 31 Bearing Washer, Pinion 33 Bearing Cone, Pinion Shaft 34 Double Bearing Cup, Pinion Shaft 35 Roller Bearing, Pinion Nose 36 Shielded Ball Bearing, Lower Shaft 37 3/8"-16 x 1-3/4" Stud, Gear Cover 38 5/16" Dia. Steel Ball, Gear Cover Stud 39 Ball Bearing, Stationary Coupler 40 Stationary Coupler 41 Small Ball Bearing, Stationary Coupler 42 Sliding Coupler 43 Internal Snap Ring, Rear Bearing
Part No.
Qty.
WIN5840 WINK5840 WINK6745-01 WINK6782-01 WINK6745-02 WINK6964-02 WIN6115 WIN7358 WIN7357 WIN7403T WIN7433 WIN7224 WIN7626 WIN5778 WIN5778A WIN5778L WIN6769 WIN5400 WIN7176 WIN7117 WIN7178 WIN7177N WINK6480 WIN6729 WIN7332 WIN7874 WIN7912 WIN7794AR WIN8500 WIN7110 WIN6296A WIN5020 WIN6484 WIN7445 WIN6485R WIN5055 WIN7308 WIN7307 WIN7331 WIN7339 WIN7802 WIN7398 WIN7391 WIN6252 WIN7392 WIN6265 WIN7636
1 1 1 1 2 2 2 2 2 2 1
1 1 10 2 22 10 1 1 2 2 10 1 6 1 1 1 1 1 1 2 1 1 1 10 10 1 1 1 1 1
No.
Description
2010
209-224OW10.indd 221
Part No.
Qty.
44 External Snap Ring, Stub Shaft WIN7637 1 45 Shielded Ball Bearing, Stub Shaft WIN7390 1 46 Stub Shaft WIN6250 1 47 External Snap Ring, Stub Shaft And Lower Shaft WIN7610 3 48 1/4" Dia. Steel Detent Ball WIN7347 2 49 Detent Spring WIN6318 1 50 1/2"-13 Aluminum Jam Nut WIN7137A 1 51 1/2" SAE Flat Washer WIN7167 1 52 1/2"-13 Adjusting Screw WIN6149 1 53 Thrust Block WIN5010 1 54 Ring Gear Bolt WIN5124 12 55 3/8" SAE Flat Washer WIN7114 12 56 3/8"-24 Locknut WIN7115 12 57 3/8" Pipe Plug WIN7111B 1 58 Inspection Plug WIN5290 1 59 O-Ring, Inspection Plug WIN7453 1 60 Standard Lower Shaft Closed Drive WIN5003-05 1 61 O-Ring, Shifter Shaft (Large) WIN7442 1 62 Special Sealed Ball Bearing, Lower Shaft WIN7383F 1 63 HT Lower Shaft Shifter WIN6249HT 1 64 External Snap Ring, Lower Shaft For Int. Coupler WIN7660 1 65 HT Lower Shaft, Shifter With Int, Coupler WIN6678-03 1 66 Spacer, Front Bearing WIN6680 1 67 Seal, Integral Coupler WIN7242 1 68 O-Ring, Lower Shaft With Int. Coupler WIN7452 3 69 Internal Snap Ring, Integral Coupler WIN7664 1 70 Integral 10-10 Coupler WIN6676 1 71 Sealed Ball Bearing, Integral 10-10 Coupler WIN7531 1 72 External Snap Ring, Integral 10-10 Coupler WIN7657 1 73 Shifter Housing WIN6264 1 74 O-Ring, Shifter Shaft (Small) WIN7443 1 75 Shifter Yoke WIN6302 1 76 Gasket, Shifter Housing WIN6515 1 77 Shifter Shaft WIN6251 1 78 3/8" Belleville Washer, Shift Arm WIN7815 1 79 3/8"-24 x 3/4" Hex Head, Shift Arm WIN7109S 1 80 5/16"-18 x 7/8" Ferry Head Cap Screw, Shift. Housing WIN7795 4 81 External Snap Ring, Shifter Shaft WIN7631 1 82 Heavy Duty Gear Cover With Bearings WINK6630 1 83 Double Row All Bearing With Snap Ring WIN7521 2 84 O-Ring, Bearing Cap WIN7447 2 85 Bearing Cap, Heavy Duty Gear Cover WIN6582 2 86 1/4"-20 x 5/8" Socket Head Cap Screw, Bearing Cap WIN7955 6 87 Shift Arm WIN6496 1 88 Bearing Retainer WIN6267 1 89 Stud WIN7863 2
221
11/10/09 10:57:54 AM
8500 Series 10-Spline Quick Change Gears Winters 10-spline, Quick Change Gears, for use with 10" dia. ring gear applications, are 1-3/8" wide, and machined, broached and hobbed from quality SAE 8620 steel by Winters technicians. Sets 50 thru 58 are for limited horsepower applications only. Winters also has an attractive poster (WINPOSTER10) which displays all available gear sets and ratios, and is an ideal reference chart for the wall of any race shop.
Part No.
Gear Set No.
WIN8501 WIN8502 WIN8505 WIN8515 WIN8526 WIN8506 WIN8525 WIN8512 WIN8507 WIN8507A WIN8517 WIN8517A WIN8508 WIN8508A WIN8519 WIN8509A WIN8509 WIN8511 WIN8503 WIN8513 WIN8518 WIN8518A WIN8504A WIN8504 WIN8520 WIN8522 WIN8516 WIN8510 WIN8510A WIN8534 WIN8534A
1 2 5 15 26 6 25 12 7 7A 17 17A 8 8A 19 9A 9 11 3 13 18 18A 4A 4 20 22 16 10 10A 34 34A
4.12 Axle Ratio (8-33 Teeth) Low High
Low Spur Ratio
No. Of Teeth
High Spur Ratio
4.86 Axle Ratio (7-34 Teeth) Low High
4.11 3.96 3.95 3.91 3.83 3.78 3.74 3.68 3.63 3.58 3.54 3.52 3.48 3.51 3.45 3.42 3.39 3.35 3.31 3.29 3.26 3.23 3.21 3.18 3.16 3.12 3.08 3.04 3.02 2.98 3.00
1.00 1.03 1.04 1.05 1.07 1.08 1.10 1.11 1.13 1.14 1.15 1.16 1.18 1.174 1.19 1.20 1.21 1.22 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.32 1.33 1.35 3.02 1.37 3.00
21/21 27/28 25/25 19/20 27/29 23/25 20/22 26/29 23/26 21/24 26/30 24/28 22/26 23/27 21/25 25/30 19/23 22/27 25/31 20/25 23/29 22/28 18/23 24/31 20/26 19/25 18/24 17/23 22/30 21/29 22/32
1.00 0.96 0.96 0.95 0.93 0.92 0.90 0.89 0.88 0.87 0.86 0.85 0.84 0.84 0.84 0.83 0.82 0.81 0.80 0.80 0.79 0.79 0.78 0.77 0.76 0.76 0.75 0.73 0.62 0.72 0.67
4.86 4.68 4.66 4.63 4.52 4.47 4.42 4.36 4.30 4.23 4.19 4.17 4.11 4.14 4.08 4.05 4.01 3.96 3.92 3.89 3.85 3.82 3.80 3.76 3.75 3.69 3.65 3.59 3.56 3.52 3.54
4.11 4.26 4.28 4.32 4.41 4.46 4.52 4.58 4.64 4.69 4.76 4.80 4.85 4.84 4.89 4.93 4.97 5.04 5.10 5.14 5.18 5.23 5.26 5.31 5.34 5.41 5.48 5.56 5.62 5.68 5.67
4.86 5.04 5.07 5.10 5.23 5.28 5.35 5.42 5.49 5.54 5.64 5.67 5.75 5.70 5.78 5.83 5.88 5.97 6.03 6.08 6.13 6.19 6.21 6.28 6.32 6.39 6.48 6.58 6.62 6.71 6.68
Part No.
Gear Set No.
WIN8514 WIN8514A WIN8535 WIN8532 WIN8532A WIN8524 WIN8536 WIN8537 WIN8523 WIN8521 WIN8527 WIN8543 WIN8528 WIN8529 WIN8539 WIN8530 WIN8540 WIN8541 WIN8531 WIN8533 WIN8531A WIN8530A WIN8550 WIN8551 WIN8552 WIN8554 WIN8555 WIN8556 WIN8557 WIN8558
14 14A 35 32 32A 24 36 37 23 21 27 43 28 29 39 30 40 41 31 33 31A 30A 50 51 52 54 55 56 57 58
4.12 Axle Ratio (8-33 Teeth) Low High
Low Spur Ratio
No. Of Teeth
High Spur Ratio
4.86 Axle Ratio (7-34 Teeth) Low High
2.95 2.93 2.91 2.89 2.87 2.83 2.80 2.78 2.74 2.70 2.66 2.63 2.60 2.57 2.55 2.53 2.52 2.50 2.47 2.42 2.40 2.37 2.35 2.33 2.31 2.28 2.27 2.25 2.19 2.18
1.39 1.40 1.41 1.42 1.43 1.45 1.47 1.48 1.50 1.52 1.54 1.56 1.57 1.59 1.61 1.62 1.63 1.65 1.67 1.70 1.71 1.73 1.75 1.76 1.78 1.80 1.81 1.82 1.87 1.88
23/32 20/28 17/24 19/27 23/33 20/29 17/25 21/31 22/33 19/29 22/34 16/25 19/30 15/24 18/29 26/16 19/31 17/28 21/35 20/34 21/36 15/26 35/20 30/17 32/18 36/20 29/16 31/17 30/16 32/17
0.71 0.71 0.70 0.70 0.70 0.69 0.68 0.67 0.67 0.65 0.64 0.64 0.63 0.62 0.62 0.61 0.61 0.61 0.60 0.58 0.58 0.57 0.57 0.56 0.56 0.55 0.55 0.54 0.53 0.53
3.50 3.47 3.44 3.42 3.39 3.35 3.30 3.29 3.24 3.20 3.15 3.11 3.08 3.04 3.02 2.99 2.98 2.95 2.92 2.85 2.84 2.80 2.77 2.75 2.73 2.69 2.68 2.66 2.59 2.58
5.72 5.76 5.80 5.85 5.89 5.96 6.04 6.07 6.17 6.27 6.35 6.42 6.49 6.58 6.62 6.68 6.71 6.77 6.85 6.99 7.05 7.12 7.19 7.25 7.30 7.39 7.45 7.49 7.70 7.74
6.76 6.81 6.86 6.90 6.97 7.04 7.15 7.19 7.29 7.42 7.52 7.59 7.68 7.78 7.83 7.91 7.93 8.00 8.10 8.26 8.34 8.42 8.50 8.57 8.64 8.75 8.81 8.86 9.11 9.15
Mag. Sprint Center Gear Cover 8500 Series 10-Spline Quick Change Gear Poster WINPOSTER10 Full sized (16-1/2" x 20") poster displays tooth count, and ring and pinion ratio data. Ideal for the race shop or trailer.
Cover No.
Bearing No.
Plug No.
WINK6508
WIN7332
WIN7874
WINK6508
5
7
8
Gear Cover Accessories Fig. No.
5 5 6 6 7 8
222
6
Description
Part No.
Aluminum High Nut and Stud Kit WIN6390AR Aluminum High Nuts Only WIN7794AR Sprint Center Gasket (Heavy Duty) WIN6729HD Sprint Center Gasket, Gear Cover WIN6729 O-Ring, H.D. Sprint Cover Bearing Cap WIN7447 Wrench 1-7/8" & 1-3/8" (Side Bell & Fill Plug) WIN2104
2010
209-224OW10.indd 222
11/10/09 10:57:55 AM
4400 Series 6-Spline Quick Change Gears (Midget Gears) Part No.
Gear Set No.
Low Spur Ratio
High Spur Ratio
No. Of Teeth
3.78 Axle Ratio (9-34 Teeth) Low High
4.11 Axle Ratio (9-37 Teeth) Low High
4.33 Axle Ratio (9-39 Teeth) Low High
WIN4401 WIN4402 WIN4403 WIN4403B WIN4403A WIN4404 WIN4405 WIN4405A WIN4406 WIN4424 WIN4425 WIN4407 WIN4423 WIN4408 WIN4409 WIN4410 WIN4411 WIN4412 WIN4413 WIN4414 WIN4415 WIN4416 WIN4417 WIN4418 WIN4418A WIN4419 WIN4428
1 2 3 3B 3A 4 5 5A 6 24 25 7 23 8 9 10 11 12 13 14 15 16 17 18 18A 19 28
1.000 0.958 0.920 0.895 0.880 0.846 0.808 0.792 0.778 0.767 0.750 0.741 0.727 0.714 0.696 0.682 0.667 0.655 0.652 0.636 0.625 0.615 0.600 0.591 0.571 0.560 0.528
1.000 1.043 1.087 1.118 1.136 1.182 1.238 1.263 1.286 1.304 1.333 1.350 1.375 1.400 1.438 1.467 1.500 1.526 1.533 1.571 1.600 1.625 1.667 1.692 1.750 1.786 1.895
24/24 23/24 23/25 17/19 22/25 22/26 21/26 19/24 21/27 23/30 18/24 20/27 16/22 20/28 16/23 15/22 18/27 19/29 15/23 14/22 15/24 16/26 18/30 13/22 16/28 14/25 19/36
3.78 3.62 3.48 3.38 3.33 3.20 3.05 2.99 2.94 2.90 2.84 2.80 2.75 2.70 2.63 2.58 2.52 2.48 2.47 2.41 2.36 2.33 2.27 2.23 2.16 2.12 2.00
4.11 3.94 3.78 3.68 3.62 3.48 3.32 3.25 3.20 3.15 3.08 3.04 2.99 2.94 2.86 2.80 2.74 2.69 2.68 2.62 2.57 2.53 2.47 2.43 2.35 2.30 2.17
4.33 4.15 3.98 3.87 3.81 3.66 3.50 3.43 3.37 3.32 3.25 3.21 3.15 3.09 3.01 2.95 2.89 2.84 2.82 2.76 2.71 2.66 2.60 2.56 2.47 2.42 2.29
3.78 3.94 4.11 4.22 4.30 4.47 4.68 4.77 4.86 4.93 5.04 5.10 5.20 5.29 5.43 5.54 5.67 5.77 5.80 5.94 6.05 6.14 6.30 6.40 6.62 6.75 7.16
Semi-Synthetic Lubricant WIN1730 Specifically engineered for rear axles, semi-synthetic 80-90-140W Hypoid lube has moly additives to reduce friction and enhance durability. Sold in 1 gallon containers.
Front And Rear Torsion Arms
4.11 4.29 4.47 4.59 4.67 4.86 5.09 5.19 5.28 5.36 5.48 5.55 5.65 5.75 5.91 6.03 6.17 6.27 6.30 6.46 6.58 6.68 6.85 6.96 7.19 7.34 7.79
4.33 4.52 4.71 4.84 4.92 5.12 5.36 5.47 5.57 5.65 5.77 5.85 5.95 6.06 6.22 6.35 6.50 6.61 6.64 6.80 6.93 7.04 7.22 7.33 7.58 7.73 8.20
Birdcages WINSC2575 This state-of-the-art Sprint birdcage is designed with strength in mind but still emphasizes weight savings. The Forged 7075-T6 black anodized birdcage comes in pairs with fully greasable 28mm angular contact bearings, integral timing level and all hardware. Part No.
Heavy duty styles are for racers that “feel” the arms flex under load. Contact patch under the arm is rounded to prevent premature arm wear. Torsion arms are solid from the bend to the back of the rear arm to help reduce flexing. Winters is the ONLY ONE to offer this feature. Winters rear arms are the ONLY ONES to offer a light press fit on the shock bolt mounting area. 100% machined surface. 10° angle broach makes wheel rate stiffer. Part No.
Description
WINSC2120L ............ Left Front Torsion Arm WINSC2125R ............ Right Front Torsion Arm, 10° Broach WINSC2130R ............ Right Front Torsion Arm WINSC2686R ............ Right Rear Torsion Arm WINSC2688L ............ Left Rear Torsion Arm
10-10 Couplers Offered in steel or aluminum. Part No.
Description
WIN5987 .................. Standard Steel 10-10 Coupler WIN5987A ................ Standard Aluminum 10-10 Coupler WIN6676 .................. Integral Steel 10-10 Coupler
Description
WIN4060 .................. Bolt Sleeve WIN7693 .................. Retaining Ring WIN8668 .................. Argular Contact Bearing, -28mm, Sold Individually WIN8770 .................. Bottom Arm Bolt, 1-1/2" x 20" x 4" WIN8771 .................. Top Arm Bolt, 1/2" x 20" x 1-3/4" WIN8779 .................. Integral Level WINSC2574 .............. Caliper Mount With Hardware
Aluminum Torque Tube And Collar WIN6661-02 Aluminum 3" dia. torque tube is 28" long. Includes aluminum collar.
Torque Ball Sprint Oversized Torque Ball Assemblies are offered in standard and lightweight versions. Lightweight assembly is Teflon coated to reduce friction, decrease wear, and resist corrosion. Part No.
WIN2275L
Description
WIN2275 ...........Oversized Torque Ball WIN2275L..........Lightweight Oversized Torque Ball
2010
209-224OW10.indd 223
223
11/10/09 10:58:04 AM
Lightweight Outside Ball Assembly WIN3475
Front Spindles And Components
Assembly includes lightweight oversized magnesium bellhousing (WINK2273L), lightweight oversized torque ball (WIN2275L) and oversized, Teflon-coated magnesium bell collar (WIN2274L).
WINSC2810
Steel Torque Balls With Boot Assemblies NEW! Part No.
WIN1109-02A Part No.
WIN4605
Steering Arms And Pitman Arms
Torsion Stops NEW! Part No.
All Winters sprint steering arms are forged 7075-T6 aluminum.
Description
WINSC2140 .......1.75" Forged 7075-T6, Aluminum WINSC2150 .......2" Forged 7075-T6, Aluminum WINSC2160 .......1.75" Forged, Steel WINSC2160T .....1.75" Forged, Titanium WINSC2170 .......2" Forged, Steel
Part No.
WINSC2140
WINSC2160
Front Splined Rear Wheel Center WIN3784 NEW! This splined wheel center is 100% CNC machined from Forged 2024-T3 aluminum. This replacement center fits most popular brands of wheels, while exceeding the strength of the original center.
Track Star 5 Front Hubs WIN3980-5B NEW! Lightweight, forged 2024-T3 aluminum front hubs are CNCmachined to precise tolerances and offer exceptional durability, while reducing critical rotating weight. Left hubs weighs 3.50 lbs., while right hub weighs 3.30 lbs. Hubs are sold complete with screw-in dust caps, wheel studs, nuts, bearings, races and seals.
Forged Direct Mount Front Hubs Winters aluminum direct mount Front Hubs are forged from 2024-T3 superior strength. Aluminum hubs are CNC-machined, maintaining precise tolerances and gold anodized to resist corrosion. Complete with dust caps, wheel studs, nuts, bearings, races and seals. Part No.
WIN3622
WIN1109-02A ........... Aluminum King Pin Cap WIN2377 .................. Trick Spindle Nut Assembly WIN3622 .................. Spindle With Straight Steel Snout WIN6476-02 ............. Steel King Pin WINSC2810 .............. Left Front Caliper Mount For 10-7/8" Rotor
Description
WIN4605 ...........Steel Ball With Boot Assembly WIN4064 ...........Torque Ball WIN4227 ...........Rubber Boot WIN4267 ...........Retaining Collar Set
WIN2377 Description
Description
WIN3980 ...........Front Forged Aluminum Hub Set For L/W Spindle WIN7291V .........Double Lip Seal For Oil
Rear Axle Nuts
Description
WIN3451 ...........Single Right Front Steering Arm For 3-1/4" Spindles WIN3452 ...........Combo Left Front Steering Arms For 3-1/4" Spindles WINSC2260 .......Angle Broached Pitman Arm With 11" And 12" Mounting
Sprint 2" Rear Axle Spacer Kit WIN6705 2" rear axle spacer kit fits 42-spline rear wheels and axles, includes one of each: straight spacers, 3/8", 7/8" , 1-7/8", 2-3/8" and tapered 1-1/2", 2" spacers. 7075-T6 billet aluminum. Part No.
Description
WIN6156 ...........Steel Ring, 1/8", Installs Prior To Birdcage WIN6683 ...........Aluminum Axle Spacer, 3/8" Thick (Single Spacer) WIN6686 ...........Aluminum Axle Spacer, 7/8" Thick (Single Spacer)
Sprint Axle Spacer Kit WIN3558 Ten-piece axle spacer kit includes two 3/8", two 3/4", two 1" splined, one 2" splined, one 1-1/4" tapered splined, one 2" tapered splined and one 2-1/2" tapered splined. 7075-T6 billet aluminum.
6-Pin Hub Stud Kit WIN5899 Kit includes six front hub drive pins. For knock-off hubs.
Posi-Lock Nut Assemblies WIN6498R Pinion Posi-Lock nut assemblies fit 10" quick change rear ends. Positive locking O-ring retains the nut and the spacer. Easy removal, but still stays in place when quick change gears are being changed. Available in right hand thread only.
Hex nuts are made from 7075-T6 aluminum for sprints. Sold individually. Part No.
Description
WIN6121L................. Sprint, LH Threads WIN6121R ................ Sprint, RH Threads
224
2010
209-224OW10.indd 224
11/10/09 10:58:20 AM
NEW VENDOR
SB Chevy Motown Cast Iron Engine Blocks No more junk yard searches! High-density, four-bolt main blocks are 100% compatible with stock components and feature expanded water jackets, priority main bearing oiling system and indexed lifter bores. Motown Race Block has “splayed” steel billet four-bolt main caps. Blocks listed must be “prepped” before assembly. Part No.
Description
WRD084010 Motown Block WRD084020 Motown Block WRD084030 Motown Block WRD084130 Motown Race Block
Main Caps
Bore
Main
Deck Height
Nodular Iron Nodular Iron Nodular Iron Splayed Billet
3.990" 4.115" 4.115" 4.115"
350 350 400 400
9.025" 9.025" 9.025" 9.025"
SB Chevy Motown Lite Aluminum Engine Blocks The Motown Lite’s horizontal ribs stabilize and strengthen the cylinder walls. Other features include priority main bearing oiling, splayed billet steel main caps, heavy duty main bulkheads, and internal reinforcement ribs that reinforce the block and cross-feed the lifter bores. Available with 350 or 400 main bearing sizing. Blocks listed below must be “prepped” before assembly. Part No.
Description
Main Caps
Bore
Main
Deck Height
WRD084520 WRD084530
Motown Lite Motown Lite
Splayed Billet Splayed Billet
4.115" 4.115"
350 400
9.025" 9.025"
Reusable Steel Hose Ends For Brake, Clutch Or Instrument Lines Maximum high pressure hose ends are engineered for XRP Teflon hose and may be used for brake, clutch and instrument lines, and power steering.
Weld Bungs
Size
Fem. Weld Bung ORB
Male Weld Bung
-4 -6 -8 -10 -12 -16 -20
XRP987104 XRP987106 XRP987108 XRP987110 XRP987112 XRP987116 XRP987120
XRP997104 XRP997106 XRP997108 XRP997110 XRP997112 XRP997116 XRP997120
Pipe Size Fem. Pipe Weld Bung
1/8" 1/4" 3/8" 1/2" 3/4" 1"
Ensure Hose Clamps and Pliers Use self-tensioning hose clamps with push-on hose ends to provide a tight, leak-proof seal without damaging the hose. Clamps come in four pack. Part No.
Description
Clamps XRP818404 .......-4AN Clamp XRP818406 .......-6AN Clamp XRP818408 .......-8AN Clamp XRP818410 .......-10AN Clamp XRP818412 .......-12AN Clamp Ensure Hose Clamp Pliers XRP818000 .......Ensure Hose Clamp Pliers
Fuel Pressure Take-Off Adapters Part No.
Description
XRP700192 .......-6 Male to -6 Male XRP700193 .......-6 Male to 1/4" Male NPT XRP700194 .......-6 Male to 3/8" Male NPT XRP700195 .......-6 Male to -6 Female Swivel XRP700196 .......-8 Male to -8 Male XRP700198 .......-8 Male to 3/8" Male NPT XRP700199 .......-8 Male to -8 Female Swivel XRP700201 .......-10 Male to -10 Male XRP700202 .......-10 Male to -10 Female Swivel Note: All adapters have 1/8" NPT port.
225-240OW10_Lane.indd 225
XRP996701 XRP996702 XRP996703 XRP996704 XRP996706 XRP996810
Size
Straight
45° Tube
90° Tube
-3AN -4AN
XRP600003 XRP600004
XRP604503 –
XRP609003 XRP609004
Assembled Stainless Steel Braided Teflon Hose With Fittings Ready to install lines have crimped and swaged ends for use in brake, clutch or instrument systems. Choice of straight fittings on both ends, or straight on one end and 90° on the other, in a variety of lengths. Length
Straight to Straight -3AN
Straight to Straight -4AN
90° to Straight -3AN
9" 12" 15" 18" 20" 21" 24" 27" 30" 33" 36" 42" 45" 50" 72"
XRP630009 XRP630012 XRP630015 XRP630018 XRP630020 XRP630021 XRP630024 XRP630027 XRP630030 XRP630033 XRP630036 XRP630042 XRP630045 XRP630050 –
– XRP640012 XRP640015 XRP640018 – – XRP640024 – – – XRP640036 – – XRP640050 XRP640072
– XRP639012 – – – – XRP639024 – – – XRP639036 – – XRP639050 –
Gauge Adapters Part No.
Description
XRP705003 .......Steel Straight -3 Male To 1/8" NPT Female XRP705004 .......Steel Straight -4 Male To 1/8" NPT Female XRP705090 .......Steel 90° Steel -4 Male To 1/8" NPT Female XRP705093 .......Steel 90° Steel -3 Male To 1/8" NPT Female XRP795003 .......Aluminum Straight -3 Male To 1/8" NPT Female XRP795004 .......Aluminum Straight -4 Male To 1/8" NPT Female 2010
225
11/10/09 11:09:29 AM
Stainless Steel Braided CPE Race Hose Stainless steel outer braid delivers durability, heat resistance and great looks. The elastomer chlorinated polyethylene (CPE) inner tube is compatible with a wide range of liquids. Size
I.D.
O.D.
3 Feet
6 Feet
10 Feet
15 Feet
20 Feet
-6 -8 -10 -12
.344" .438" .562" .688"
.547" .641" .797" .928"
XRP300306 XRP300308 XRP300310 XRP300312
XRP300606 XRP300608 XRP300610 XRP300612
XRP301006 XRP301008 XRP301010 XRP301012
XRP301506 XRP301508 XRP301510 XRP301512
XRP302006 XRP302008 XRP302010 XRP302012
Aluminum Hose Ends XRP hose ends are aviation nipple and cutter style to prevent blow off and leakage problems. Fittings are built from heat treated aluminum and are race ready. Notes: Double Swivel Style Ends Are Triple Sealed And Adjustable After Assembly To Hose. All Hose Ends Are JIC 37°.
Straight Hose Ends Part No.
Size Part No.
XRP100004 .......-4 XRP100006 .......-6 XRP100008 .......-8 Swivel Part No.
30° Hose End XRP203006 XRP203008 XRP203010 XRP203012 XRP203016 45° Hose End – XRP204506 XRP204508 XRP204510 XRP204512 XRP204516 60° Hose End – XRP206006 XRP206008 XRP206010 XRP206012 XRP206016 90° Hose End – XRP209006 XRP209008 XRP209010 XRP209012 XRP209016 120° Hose End – XRP212006 XRP212008 XRP212010 XRP212012 XRP212016 150° Hose End XRP215006 XRP215008 XRP215010 XRP215012 XRP215016 180° Hose End – XRP218006 XRP218008 XRP218010 XRP218012 XRP218016
226
Size
XRP100010 ....... -10 XRP100012 ....... -12 XRP100016 ....... -16 Non-Swivel Part No.
Size
XRP103006 XRP103008 XRP103010 XRP103012 –
-6 -8 -10 -12 -16
XRP104504 XRP104506 XRP104508 XRP104510 XRP104512 XRP104516
-4 -6 -8 -10 -12 -16
XRP106004 XRP106006 XRP106008 XRP106010 XRP106012 XRP106016
-4 -6 -8 -10 -12 -16
XRP109004 XRP109006 XRP109008 XRP109010 XRP109012 XRP109016
-4 -6 -8 -10 -12 -16
XRP112004 XRP112006 XRP112008 XRP112010 XRP112012 XRP112016
-4 -6 -8 -10 -12 -16
XRP115006 XRP115008 XRP115010 XRP115012 XRP115016
-6 -8 -10 -12 -16
XRP118004 XRP118006 XRP118008 XRP118010 XRP118012 XRP118016
-4 -6 -8 -10 -12 -16
Double Swivel Forged Hose Ends Size
45° Part No.
90° Part No.
-6 -8 -10 -12
XRP204606 XRP204608 XRP204610 XRP204612
XRP209106 XRP209108 XRP209110 XRP209112
Aluminum Push-On Hose Ends Machined from aluminum alloy with red and blue anodized finish, hose ends are only compatible with push-on hose, NOT stainless steel braided hose. All hose ends are JIC 37°. See page 225 for push-on hose clamps and pliers.
Part No.
Size
Straight XRP230004 .............. -4 XRP230006 .............. -6 XRP230008 .............. -8 XRP230010 .............. -10 XRP230012 .............. -12
Part No.
Part No.
Size
45° XRP234504 .............. -4 XRP234506 .............. -6 XRP234508 .............. -8 XRP234510 .............. -10 XRP234512 .............. -12
Size
Part No.
Part No.
Size
60° XRP236004 .............. -4 XRP236006 .............. -6 XRP236008 .............. -8 XRP236010 .............. -10 XRP236012 .............. -12
Size
90° XRP239004 .............. -4 XRP239006 .............. -6 XRP239008 .............. -8 XRP239010 .............. -10 XRP239012 .............. -12
120° XRP231204 .............. -4 XRP231206 .............. -6 XRP231208 .............. -8 XRP231210 .............. -10 XRP231212 .............. -12
Part No.
Part No.
Size
150° XRP231504 .............. -4 XRP231506 .............. -6 XRP231508 .............. -8 XRP231510 .............. -10 XRP231512 .............. -12
Size
180° XRP231806 .............. -6 XRP231808 .............. -8 XRP231810 .............. -10 XRP231812 .............. -12
2010
225-240OW10_Lane.indd 226
11/10/09 11:09:48 AM
Aluminum Adapter Fittings Known for their rapid response to the specialized needs of racers, XRP, Inc. has formed a close working relationship with many professional and amateur teams in all forms of motorsports. XRP’s quality fittings are the result of this relationship. Part No
AN Size
Flare Bulkhead Tee On Run XRP980403 .............. -3 XRP980404 .............. -4 XRP980406 .............. -6 XRP980410 .............. -10 Flare Plug XRP980604 .............. -4 XRP980606 .............. -6 XRP980608 .............. -8 XRP980610 .............. -10 XRP980612 .............. -12 XRP980616 .............. -16 Straight Thread Port Plug XRP981406 .............. -6 XRP981408 .............. -8 XRP981410 .............. -10 XRP981412 .............. -12 XRP981416 .............. -16 Male Flare Union XRP981503 .............. -3 XRP981504 .............. -4 XRP981506 .............. -6 XRP981508 .............. -8 XRP981510 .............. -10 XRP981512 .............. -12 XRP981516 .............. -16 Tube Nut XRP981803-6 ........... -3 (6-Pk.) XRP981804-6 ........... -4 (6-Pk.) XRP981806-2 ........... -6 (2-Pk.) XRP981808 .............. -8 XRP981810 .............. -10 Tube Sleeve XRP981903-6 ........... -3 (6-Pk.) XRP981904-6 ........... -4 (6-Pk.) XRP981906-2 ........... -6 (2-Pk.) XRP981908 .............. -8 XRP981910 .............. -10 90° Flare Union XRP982103 .............. -3 XRP982106 .............. -6 XRP982108 .............. -8 XRP982110 .............. -10 XRP982112 .............. -12 Flared Tee XRP982403 .............. -3 XRP982404 .............. -4 XRP982406 .............. -6 XRP982408 .............. -8 XRP982410 .............. -10 Part No
Pipe Size
Part No
AN Size
Flare Bulkhead XRP983204 .............. -4 XRP983206 .............. -6 XRP983208 .............. -8 XRP983210 .............. -10 XRP983212 .............. -12 XRP983216 .............. -16 90° Flare Bulkhead XRP983303 .............. -3 XRP983306 .............. -6 XRP983308 .............. -8 XRP983310 .............. -10 XRP983312 .............. -12 Flare Bulkhead Tee XRP983403 .............. -3 XRP983406 .............. -6 45° Flare Bulkhead XRP983703 .............. -3 XRP983706 .............. -6 XRP983708 .............. -8 XRP983710 .............. -10 Flare Reducer XRP991902 .............. -4-3 XRP991906 .............. -6-4 XRP991908 .............. -8-4 XRP991912 .............. -8-6 XRP991914 .............. -10-6 XRP991915 .............. -10-8 XRP991918 .............. -12-6 XRP991919 .............. -12-8 XRP991920 .............. -12-10 XRP991922 .............. -16-10 XRP991923 .............. -16-12 XRP991926 .............. -20-16 Pipe Bushing Reducer Part No.
Male to Female
XRP991201 .............. 1/4" .........1/8" XRP991202 .............. 3/8" .........1/4" XRP991203 .............. 3/8" .........1/8" XRP991204 .............. 1/2" .........3/8" XRP991205 .............. 1/2" .........1/4" XRP991206 .............. 1/2" .........1/8" XRP991207 .............. 3/4" .........1/2" XRP991208 .............. 3/4" .........3/8" XRP991209 .............. 3/4" .........1/4" XRP991210 .............. 1" ............3/4" XRP991212 .............. 1" ............3/8" AN Flare To Pipe Adapter
AN Size
Male Branch Tee XRP982503 .............. 1/8" ............... -3 XRP982504 .............. 1/8" ............... -4 XRP982506 .............. 1/4" ............... -6 XRP982508 .............. 3/8" ............... -8 XRP982510 .............. 1/2" ............... -10 Male Run Tee XRP982603 .............. 1/8" ............... -3 XRP982604 .............. 1/8" ............... -4 XRP982606 .............. 1/4" ............... -6 XRP982608 .............. 3/8" ............... -8 XRP982610 .............. 1/2" ............... -10 XRP982612 .............. 3/4" ............... -12
Flare Pipe Size Size
Straight Flare to Pipe
45° Elbow Flare to Pipe
90° Elbow Flare to Pipe
-3 -3 -4 -4 -4 -6 -6 -6 -6 -8 -8 -8 -8 -10 -10 -10 -12 -12 -16 -20
XRP981603 XRP981634 XRP981604 XRP981644 XRP981646 XRP981662 XRP981606 XRP981666 XRP981668 XRP981607 XRP981608 XRP981688 XRP981609 XRP981611 XRP981610 XRP981613 XRP981614 XRP981612 XRP981617 XRP981621
XRP982303 – XRP982304 – – – XRP982306 XRP982366 – – XRP982308 XRP982388 – XRP982311 XRP982310 – XRP982314 XRP982312 XRP982317 –
XRP982203 – XRP982204 XRP982244 – XRP982262 XRP982206 XRP982266 XRP982268 XRP982207 XRP982208 XRP982288 XRP982209 XRP982211 XRP982210 XRP982213 XRP982214 XRP982212 XRP982217 –
1/8" 1/4" 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" 3/4" 1"
2010
225-240OW10_Lane.indd 227
227
11/10/09 11:10:09 AM
Aluminum Adapter Fittings Part No
Pipe Size
Female Pipe Union XRP991001 .............. 1/8" XRP991002 .............. 1/4" XRP991003 .............. 3/8" XRP991004 .............. 1/2" XRP991006 .............. 3/4" Male Pipe Nipple XRP991101 .............. 1/8" XRP991102 .............. 1/4" XRP991103 .............. 3/8" XRP991104 .............. 1/2" XRP991106 .............. 3/4" Allen Socket Plug XRP993201* ............. 1/16" XRP993202* ............. 1/8" XRP993203* ............. 1/4" XRP993204* ............. 3/8" XRP993205 .............. 1/2" XRP993206 .............. 3/4" XRP993207 .............. 1" Female Pipe Tee XRP991701 .............. 1/8" XRP991702 .............. 1/4" XRP991703 .............. 3/8" XRP991704 .............. 1/2" XRP991706 .............. 3/4" Bulkhead Nut Part No
AN Size
Thread Size
AN Size
XRP992903 .............. -3 XRP992904 .............. -4 XRP992906 .............. -6 XRP992908 .............. -8 XRP992910 .............. -10 XRP992912 .............. -12 XRP992916 .............. -16 XRP992920 .............. -20 Female To Male Flare Seal Expanders Part No.
AN Size
AN Size
XRP995104† ............. -3 .....................-4 XRP995106 .............. -4 .....................-6 XRP995108 .............. -6 .....................-8 XRP995110 .............. -8 .....................-10 XRP995112 .............. -10 ...................-12 XRP995116 .............. -12 ...................-16 Female To Male Flare Seal Reducers Part No.
AN Size
AN Size
XRP995004† ............. -4 .....................-3 XRP995006 .............. -6 .....................-4 XRP995008 .............. -8 .....................-6 XRP995010 .............. -10 ...................-6 XRP995011 .............. -10 ...................-8 XRP995012 .............. -12 ...................-8 XRP995013 .............. -12 ...................-10 XRP995016 .............. -16 ...................-10 XRP995017 .............. -16 ...................-12 XRP995020 .............. -20 ...................-16 Notes: Female Side Seals Internally On Flare Nose Of Mating Male Fitting No O-Ring Necessary. *Sold Per Pair. †Steel Expander.
228
2010
225-240OW10_Lane.indd 228
Straight
45°
90°
XRP980006 XRP980068 XRP980086 XRP980008 XRP980081 XRP980009 XRP980010 XRP980011 XRP980013 XRP980012 XRP980014 XRP980016
XRP984506 XRP984568 XRP984586 XRP984508 XRP984581 XRP984509 XRP984510 XRP984511 XRP984513 XRP984512 XRP984514 XRP984516
XRP989006 XRP989068 XRP989086 XRP989008 XRP989081 XRP989009 XRP989010 XRP989011 XRP989013 XRP989012 XRP989014 XRP989016
Part No.
XRP992403 .............. -3 .....................3/8"-24 XRP992404 .............. -4 .....................7/16"-20 XRP992406 .............. -6 .....................9/16"-18 XRP992408 .............. -8 .....................3/4"-16 XRP992410 .............. -10 ...................7/8"-14 XRP992412 .............. -12 ...................1-1/16"-12 XRP992416 .............. -16 ...................1-5/16"-12 37° Flare Cap Female Part No
Male Flare To O-Ring Boss (High Flow Contour ORB) Male Sz. Port Sz.
-6 -6 -8 -8 -8 -10 -10 -10 -12 -12 -16 -16
-6 -8 -6 -8 -10 -8 -10 -12 -10 -12 -12 -16
AN Size
Straight Female Flare Swivel XRP900104 .............. -4 XRP900106 .............. -6 XRP900108 .............. -8 XRP900186 .............. -8 to -6 XRP900110 .............. -10 XRP900112 .............. -12 XRP900116 .............. -16 45° Female Swivel Coupling XRP924506 .............. -6 XRP924508 .............. -8 XRP924510 .............. -10 XRP924512 .............. -12 90° Female Swivel Coupling XRP929006 .............. -6 XRP929008 .............. -8 XRP929010 .............. -10 XRP929012 .............. -12 Tee Male Flare To Female Swivel On Side XRP900204 .............. -4 XRP900206 .............. -6 XRP900208 .............. -8 XRP900210 .............. -10 XRP900212 .............. -12 AN Tee Female Swivel On Run XRP900303 .............. -3 XRP900304 .............. -4 XRP900306 .............. -6 XRP900308 .............. -8 XRP900310 .............. -10 XRP900312 .............. -12 XRP900316 .............. -16 45° Female Swivel To Male Flare XRP920406 .............. -6 XRP920408 .............. -8 XRP920410 .............. -10 XRP920412 .............. -12 XRP920416 .............. -16 90° Female Swivel To Male Flare Tube
Forged
AN Size
XRP920504 ........XRP900504 .......-4 XRP920506 ........XRP900506 .......-6 XRP920508 ........XRP900508 .......-8 XRP920510 ........XRP900510 .......-10 XRP920512 ........XRP900512 .......-12 XRP920516 ........XRP900516 .......-16 Straight Female Flare To Pipe Part No.
AN Size
NPT Size
XRP900641 (Steel).... -4 ............. 1/8" XRP900604 .............. -4 ............. 1/8" XRP900662 .............. -6 ............. 1/8" XRP900606 .............. -6 ............. 1/4" XRP900666 .............. -6 ............. 3/8" XRP900667 .............. -8 ............. 1/4" XRP900608 .............. -8 ............. 3/8" XRP900688 .............. -8 ............. 1/2" XRP900610 .............. -10 ........... 1/2" XRP900611 .............. -10 ........... 3/8" XRP900614 .............. -12 ........... 1/2"
11/10/09 11:10:31 AM
Spark Plug Heat Range/Cross Reference Thread Size/Reach
Hex
Heat Range
Accel
Standard Non-Resistor Spark Plugs Autolite Champion Denso
NGK
Accel
Power/Projected Tip Non-Resistor Spark Plugs Autolite Champion Denso NGK
Chevrolet, Chrysler (Wedge), Oldsmobile, Pontiac - Standard Reach - Flat Seat With Gasket Hot – – – – – ACL0138 – – – – – – – – – ACL0137 AUT75 – – NGKR5670-5 14mm / 3/8" 13/16" ACL0124 – – – NGKB6S ACL0134 AUTAR73 – – NGKR5670-6 ACL0123 AUT353 – – NGKB7S – AUTAR72 CHPJ63Y – NGKR5670-7 Cold – – – – NGKB8S – – – – NGKR5670-8 Chevrolet (Big Block), Chrysler (Hemi) - Flat Seat With Gasket Hot – – – – – – – – DENIK16 – – – – – – – – – DENIK20 – – AUTAR3935 – – NGKR5671A-7 – – CHPC63YC DENIK22 – 14mm / 3/4" 5/8" – AUTAR3934 CHPC61CX – NGKR5671A-8 – AUTAR3911 CHPC61YC DENIK24 NGKR5672A-8 – AUTAR3933 CHPC59CX – NGKR5671A-9 – AUTAR3910 CHPC59YC DENIK27 NGKR5672A-9 – AUTAR3932 CHPC57CX – NGKR5671A-10 – – – DENIK31 NGKR5672A-10 Cold – – CHPC55CX – NGKR5671A-11 – – – – – Chevrolet (Big Block), Chrysler (Hemi) - Flat Seat With Gasket Hot ACL0146 – – – – ACL0116 – – DENIW16 NGKBP5ES – AUTAR2593 – DENIW24 NGKR6061-9 ACL0114 – – – NGKBP6ES 14mm / 3/4" 13/16" ACL0143 AUTAR2592 – DENIW27 NGKR6061-10 ACL0113 AUTAR53 – – NGKBP7ES ACL0142 – CHPN4C DENIW31 NGKR6061-11 ACL0112 AUTAR52 – – NGKBP8ES Cold ACL0141 – – – – ACL0111 AUTAR51 – – NGKBP9ES Chevrolet (Small Block), Ford (Small Block) - Conical/Tapered Seat Hot – – – – – ACL0276* – – DENITF16 – – – – – NGKR5673-6 ACL0274 – – DENITF20 NGKR5674-6 ACL0265 AUTAR135 CHPV63C – NGKR5673-7 ACL0272 AUTAR13 – DENITF22 NGKR5674-7 14mm /.460" 5/8" – AUTAR134 – DENITF24 – – AUTAR12 – – NGKR5674-8 ACL0263 AUTAR133 – – NGKR5673-8 – – – – NGKR5674-9 ACL0262 AUTAR132 CHPV59C DENITF27 NGKR5673-9 – – CHPV59YC – NGKR5674-10 Cold ACL0261 – CHPV57C – NGKR5673-10 – – CHPV57YC – – Chevrolet (Big Block), Ford - Conical/Tapered Seat Hot – – – – – – – – DENIT16 – – – – – – – – – DENIT20 – – – – – – – – – DENIT22 – 14mm /.708" 5/8" – – – – – – AUTAR94 – DENIT24 NGKR5724-8 – AUTAR474 – – – – AUTAR93 CHPS59YC DENIT27 NGKR5724-9 – AUTAR473 CHPS59C – – – AUTAR92 CHPS57YC – NGKR5724-10 Cold – AUTAR472 CHPS57C – – – – – – – Ford (Windsor and Big Block) - Conical/Tapered Seat Hot – – – – – ACL0378 AUT45 – – – – – – – – ACL0375 AUTAR33 – – NGKAP7FS 18mm /.460" 13/16" – – – – – – AUTAR32 – – NGKAP8FS Cold – – – – – – – – – – Notes: Use cross reference chart as a guide only. Due to differences in design and material, plugs listed in cross reference section are not exactly alike. *Substitute ACL0276S for “shorty” spark plug.
Spark Plug Heat Range Tech • Determine the thread diameter, length (reach) and whether tapered or gasket (flat) seat. • Select gap style. Spark Plug Diagnosis • Select heat range. • Adjust fuel mixture and spark advance timing for maximum performance. • Inspect plugs and pistons for evidence of detonation, abnormal combustion or excessive temperatures. • Stay with the same plug type after final heat range selection unless major modifications have been made (increasing the horsepower or operating range). Normal Fuel Fouled
Pictures Courtesy Of Autolite
Detonation
Oil Fouled
A spark plug’s Heat Range, defined as the measure of how fast the tip of the plug dissipates combustion heat, can range from as low as 500°F to as high as 2,500°F. Manufacturers offer plugs in many heat ranges, from cold through medium hot, to very hot. It is imperative that the plug stay cool enough to prevent pre-ignition or electrode destruction, and still remain hot enough to burn off combustion deposits that form at the firing tip. A plug that is excessively cold or hot for the application in question will eventually cause the engine to misfire. When working with an engine that is stock or mildly modified, it is often best to use the plug recommended by the car manufacturer. However, if the compression ratio has been altered, a different heat range plug may be required. Many racers rely upon their engine builder for plug heat range recommendations. If a racer is unsure of the correct heat range to use, it is always recommended to “stay on the safe side” and use a colder plug. A switch in heat range can change the temperature of the spark plug tip by 70-120°F. If the plug selected is too cold, it will eventually foul and misfire, but it will not damage the engine. A plug which is too hot can cause pre-ignition and detonation, often resulting in a severely damaged engine.
2010
225-240OW10_Lane.indd 229
229
11/10/09 11:10:56 AM
INDEX A Accelerator Pedal .............................. 199,212 Adapters Bulkhead .......30,36,41,42,83,91,118,174,227 Flare ................. 30,35,36,37,38,39,40,41,42, ..................44,45,85,91,138,139,174,227,228 Flare To Pipe ...................30,35,42,43,44,85, .............................................. 91,174,227,228 Fittings .......................30,35,36,37,38,39,40, .............. 41,42,43,44,45,81,82, 83,84,85,86, .................... 90,91, 123,138,173,174,227,228 Additives Break-In.......................................120,167,197 Coolant.........................................64,168,172 Fuel............................................... 34,151,168 Oil .........................................120,151,194,197 Adhesive............................................. 144,205 Air Box, Aluminum (For Radiator) .................. 96 Box, Filter Assemblies .............................111 Box, Radiused Aluminum, Front................... Filters........................................................111 Filter Cleaner ......................................111,141 Filter Oil ..............................................111,141 Gun................................................................ Horn Seal ...................................................... Hose .......................................................... 13 Regulator..........................................13,47,60 Aluminum Angled Stock ............................................ 15 Diamond Plate .......................................... 16 Flat Stock .................................................. 15 Sheets ....................................................... 16 Square Tubing ........................................... 15 Anaerobic Surface Conditioner ................ 126 Aprons .................................................. 33,125 Arm Guard.......................................... 199,202 Arm Restraints ..................94,103,164,171,196 Assembly Lube ........... 47,140,141,143,197,198 Axle Front .............................. 76,122,200,203,208 Nuts (Rear) ............................77,135,203,224 Rear ......................................................... 203 Spacers (Rear) .............................77,135,224 B Balaclavas ......................... 54,154,171,185,187 Ballast ......................................................... 19 Ballast Brackets .......................................... 19 Battery......................................................... 58 Box .....................................................58,204 Charger ................................................ 53,58 Charging Posts .................................... 32,33 Mount ........................................................ 58 Quick Disconnects ....................... 32,33,130 Bead-Loc Rings ..................................176,214 Bead Breakers ......................................12,136 Bearing Spacer .................................... 24,203 Bellhousings..........................................77,134 Birdcages ....................22,77,177,203,209,223 Bearings ............................... 22,122,203,209 Clevis....................................................... 177 Bleeders ......................................... 72,136,174 Block-Off Kits ............................................. 26 Block-Off Plate............................................ 53 Body Components ............................. 199,202 Arm Guards...................................... 199,202 Dash ................................................. 199,202 Floor Pan .......................................... 199,202
230
B - Cont. Body Components - continued Hood................................................... 199,202 Kick Panels ...................................... 199,202 Noses ............................................... 199,202 Bolt Kits Bolt And Nut Kits, Titanium, Complete .. 126 Intake...................................................25,137 Mini Sprint ............................................... 204 Tubular .................................................... 161 Bolts, Studs And Nuts, Titanium .............. 126 Bracket, Fuel Filter/Ballast..................... 21,27 Braided Hose ................................ 29,173,266 Cutter .......................................................... 5 Balance Bar .................................................196 Bias Gauge ..................................................160 Brakes Brackets ............................22,77,136,177,209 Caliper Mounts .............. 22,136,177,209,224 Calipers And Components ....... 215,216,218 Cleaner .......................................... 32,66,108 Ducts .................................................... 28,61 Fluid........................... 34,66,167,196,204,219 Fluid Bleed Kit.................................. 136,196 Hat, Front ................................................ 177 Line......................................... 28,29,211,225 Line Disconnects ................................. 3,210 Line Kit ...................................................... 28 Line Rock Guard ....................................... 76 Master Cylinders And Accessories ............... 28,196,204,218 Pads ............................................ 98,143,216 Pad Spacer ............................................. 210 Pedal ........................................... 96,199,212 Pressure Gauge ................................. 10,219 Pressure Kit.........................................28,118 Proportioning Valves....................28,196,218 Residual Pressure Valves ....................... 218 Rotor Bolt Kit ....................................167,217 Rotors............................. 76,109,176,204,217 Shut-Off Valve ........................................... 28 Speed Bleeder .........................................174 Break-In Additive ...........................69,120,168 Break-In Oil ....................................60,108,172 Breathers Breather Tube Kit .................................... 129 Crankcase ............................................ 24,25 Bump/Rubber Spring Kit ........................ 155 Bumpers........................................96,200,203 C Cabinets Junior Oil Storage .............................. 65,148 Oil Storage ......................................... 65,148 Trailer Door ........................................ 65,148 Cable Tie Holder ......................................... 65 Calipers, Brake .................................. 215,216 Brackets ................................ 22,136,177,209 Camber Adjustment Kit .......................... 182 Camshaft......................................................... Cam Bearings .............................70,73,75,188 Cam Degree Kit......................................... 152 Cam Drives And Components ....... 50,115,176 Canopies ................................................... 140 Holder................................................. 65,140 Car Cover .................................................. 162 Ceramic Engine Seal ................................ 132 Chassis .............................................. 199,202 Blocks ....................................................... 73 Brackets ..............................................15,199
B - Cont. Chassis- continued Components ................................21,199,202 Chassis Level (Smart Tool) .....................7,161 Check Valve (Fuel Tank) ....................... 45,213 Child Safety Seat ...................................... 185 Cleaners Brake And Parts ......................33,66,108,141 Degreaser .............................. 33,66,108,205 Plastic........................................................ 33 Tire .......................................................... 151 Clipboard Dual Timing Systems ...........60,117 Coatings, Flameproof ............................... 207 Coil Over Diaper Pin ............................................... 155 Hydraulic Coil Over Spring Adjuster ........ 23 Kits .............................23,46,153,154,155,157 Shock Adjusting Tool ..............46,58,108,132 Shock Cover/Protector .......23,75,78,141,154 Snap Ring ............................................... 155 Spring Rubbers ......................................... 46 Springs ............................ 87,100,158,179,186 Coil Wires ............................................129,133 Compression Tester................................9,143 Connecting Rods . 63,71,73,80,99,110,140,178 Cool Shirt .................................................... 71 Coolant Additives...........................64,168,172 Couplers (10-10) ..................................177,223 Spiral Pin ....................................................... Crankcase Breathers .................................. 25 Crankshafts .........................80,99,110,121,178 Hub ............................................................ 25 Crew Shirts ............................................... 185 Crimp Tools ...............................32,45,132,194 Cylinder Heads ........................................... 59 Gaskets .............................. 66,88,89,137,179 Cylinder Markers, Plug Wire ..................... 132 Cylinder Wiper (Wing) ............................... 135 D D-Cel Harness .......................................... 100 D-Rings .................................................. 6,100 Deburring Tool .............................................. 4 Degreaser........................................ 33,66,108 Dial Caliper.................................................... 7 Dial Indicator ................................................. 7 Diamond Plate ............................................ 16 Digital Tachometers ......... 118,160,189,192,212 Disconnects, Steering Wheel ...... 119,190,219 Distributor Gears, Magneto/Distributor.................... 133 Hold Down ......................................... 25,133 Dollies............................................................ 7 Drag Links ................................................. 201 Tether ................................................... 15,61 Drain Pan, Quick Change .........14,32,114,206 Drill Bits .....................................................4,16 Driveshafts ...............................77,122,135,177 Driving Gloves ................ 55,102,163,170,171,184,187 Harness ................................102,163,171,185 Shoes .................55,103,163,170,171,184,187 Suits ............... 52,55,93,102,164,171,184,187 Dry Sump Tanks............................. 24,146,175 Mounting Kit................................. 24,146,175 Durometers .........................................104,161 E Ear Plugs ....................................................... 5
2010
225-240OW10_Lane.indd 230
11/10/09 11:10:59 AM
INDEX E - Cont. Electric Fuel Pump ...................................... 27 Enamels.......................................... 80,147,207 Engine Assembly Lube ..................... 47,108,140,141, ......................................144,168,188,194,197 Bearings .................................. 66,70,112,188 Blocks ................................................ 73,225 Cradles ........................................................ 7 Heater................................................... 87,99 Stand Drip Tray ....................................... 107 Stands ......................................................... 7 Storage Cases ........................................ 175 Epoxy ................................................. 132,205 Exhaust Block Off Plates ........................................ 26 Gaskets .......................................137,179,181 Headers................................................... 181 System .................................................... 204 Turn-Outs ................................................ 181 F Fasteners, Quick Turn ........................... 17,131 Feeler Gauges ....................................8,26,119 Filters Air .............................................................111 Crankcase Breathers ...............................111 In-Line Fuel ......... 27,45,146,173,191,213,219 In-Line Oil ................................................ 145 In-Line Scavenge .................................... 145 Oil ........................................... 92,111,141,191 Oil Fitting With Filter Screen ................... 145 Pre-Filters ............................................... 141 Fire Brackets ........................................................ Extinguishers .................................... 7,89,95 Suits ........................... 52,55,164,171,184,187 Firewall Grommets ......................................... 137,182 Fittings Accessories ...............30,35,36,37,38,39,40, .........................41,42,43,44,45,81,82,86,107 Adapter ................................ 30,35,36,40,41, .............................42,43,44,45,82,83, 74,85, .................... 86,91, 123,138.139,174,227,228 Bulkhead ......36,41,42,83,91,107,118,174,227 Caps And Plugs ........................ 10,36,41,43, .............................. 44,45,84,86,139,227,228 Fuel Pressure Regulator ............... 45,98,146 Hose ...................... 30,37,38,39,43,44,45,81, .......................................82,138,139,225,226 Oil Pressure Gauge ............................30,225 Oil Pump ................................ 40,45,145,228 Oil Tank .................................... 40,42,45,146 Oil With Filter Screen .............................. 145 O-Rings ...........................................36,44,86 Qwik Release .................................30,44,174 Tube ......................................... 36,41,82,226 Weld ............................................ 44,109,225 Flameproof Coatings ................................ 207 Floor Jacks.........................................13,47,60 Fog Blocker ............................................... 141 Fogging Oil .................................................. 34 Freeze Plug ............................................... 147 Freeze Plug Driver Set .................................. 8 Friction Modifier ........................................ 197 Front Axles .............................76,200,203,208 Front Bumpers ..............................96,200,203 Front Cover ................................................115
F - Cont. Front Hubs ......... 76,134,136,176,208,214,224 Drive Pins ................................................ 224 Front Spindles ............................... 76,134,203 Front Wing Post ............................ 78,122,200 Fuel Additive ...............................................34,151 Block ................................................ 135.210 Bypass .....................................................112 Drum Pump .......................................... 10,27 Fill Plate .............................................. 92,109 Filter Brackets ........................................... 27 Filter Clamps .......................................27,135 Filters.............. 27,45,86,146,173,191,213,219 Fragrances ................................................ 34 Injection Systems ...............................99,112 Logs ........................................................ 123 Lubricant ...................................... 34,151,168 Pressure Gauge ......................3,10,27,32,45, .............................................. 49,118,160,189 Pressure Regulator Fittings ...... 35,40,42,45, .............................................118,146,160,189 Pressure Regulators ............................ 45,98 Pumps ........................................ 10,27,92,98 Shut-Off Valves ....................... 86,112,135,213 Tail Tank ......................................... 47,92,175 Y-Fittings ................................................. 123 Funnels ...................10,27,107,138,152,175,206 Wall Rack .................................................. 97 G Gaskets Exhaust/Header .............. 88,137,142,179,181 Head ................................... 66,88,89,137,179 Intake Manifold ....................... 88,89,137,179 Kits .......................................................... 188 Makers/Sealants .............................. 144,205 Quick Change Gear Cover .................. 31,88 Oil Pan .......................................... 88,137,179 Peeler/Remover ...................................... 205 Valve Cover .............................. 24,25,88,129 Water Pump ........................................24,179 Gas Pedal.......................................20,199,212 Gauge Panel Gauge Mounts .......................................... 96 Pilot Lights .................................................... Warning Systems ....................... 118,160,167 Gauges Accessories .................................. 32,49,189 Adapters.................................................... 49 Air Density................................................118 Digital Tachometers ......118,160,189,192,212 Durometers ............................................. 161 Fuel Pressure .....................3,10,27,32,45,49, .............................................. 50,118,160,189 Hot Lap (In-Car Timing System) ..............117 Isolators .................................................. 182 Oil Pressure................. 32,49,50,118,160,189 Oil Temperature ................. 32,49,50,118,160 Panels ..................................................... 160 Tire ..... 13,46,47,104,109,117,132,143,161,192 Two-Gauge Mount ........................................ Water Temperature ....... 32,49,50,118,160,189 Gear Bag ............................................ 103,185 Gear Change Tray .............................................. 14 Magneto/Distributor ............................... 133 Oil .............................60,108,120,168,197,206 Quick Change .................... 159,180,220,222 Tote Box .........................................14,32,159
G - Cont. Gel Lube .................................................... 205 Gloves .......................... 33,55,94,102,125,163, ............................................. 170,171,184,187 Goggles ..................................................... 142 Grease ....................... 31,120,168,172,205,206 Gun.............................................................. 9 Grommets, Firewall ............................. 137,182 Grooving Iron ........................................12,103 H Hand Cleaners .......................................... 144 Hanging Brackets ..................................... 148 Harnesses, Driver ................... 94,103,164,185 Harness Pads.................................94,164,185 Head And Neck Restraint Systems .......... 100 Headers..................................................... 181 Bolts ........................................... 138,142,189 Gaskets ...................... 88,89,137,142,179,181 Rack .......................................................... 97 Head Gaskets ...................... 66,88,89,137,179 Head Socks.................. 54,94,170,171,185,187 Heat Barrier ............................................... 195 Heat Sleeves .......................................125,170 Heat Sleeving ......................................133,195 Height Gauge .............................................. 13 Heel Riser ............................................3,20,96 Helmets .............................. 54,93,101,163,183 Accessories ...................... 54,93,101,163,183 Bags ................................. 54,94,103,163,185 Components............................54,93,163,183 Pivot Kits .......................... 54,93,101,163,183 Post Kit .........................................93,163,166 Restraint ..........................94,103,164,171,186 Shield Buttons .................................. 163,195 Shield Protector ............................... 166,185 Shields .............................. 55,93,101,163,183 Skirts .................................................... 54,94 Speed Tabs ............................................. 166 Supports............. 94,103,163,171,186,187,195 Tear-Offs ......................................54,166,195 High Speed Bypass .................................. 210 Hitches ...................................................... 169 Accessories ............................................ 169 Hold Down, Magneto/Distributor ........ 25,133 Hole Saw Set .................................................. Hood................................................... 199,202 Blanket .................................................... 211 Hose ...................37,38,39,43,44,45,81,82,173 Assembly Lube ......................................... 39 Braided .....29,37,38,39,43,44,45,81,173,226 Clamps..........................................26,82,225 Clamp Pliers ........................................... 225 Cutter .......................................................... 5 Ends ...........................35,36,37,38,39,43,44, ...................... 81,82,90,138,139,173,226,227 Fittings ........ 35,36,37,38,39,40,41,42,43,44, ............................. 45,81,82,84,85, 86,90,91, ....................... 138,139,173,225,226,227,228 Fittings, Qwik Release ...................30,44,174 Lightweight ............................................... 38 Radiator..................................................... 26 Socketless Fitting Assembly Tool ............ 39 With Fittings ....................................... 39,225 How To Books ........................................... 181 Hubs Front ...........76,109,134,136,176,208,214,224
2010
225-240OW10_Lane.indd 231
231
11/10/09 11:10:59 AM
INDEX H - Cont. Hubs - continued Drive Pins ................................................ 224 Stud Kit ................................................... 134 Hutchens Device ....................................... 100 Hydraulic Coil Adjuster ............................... 23 Hydrometer Kit ............................................ 67 I Ignition Panels ............................... 32,118,160 Ignition Systems ....................................... 123 Coil Wires ..........................................129,133 MSD Box Mount ............................. 3,32,133 Spark Plug Wire Sets ... 123,129,133,193,219 Vibration Isolator Mounts ....................... 133 Inspection Plug ......................................... 211 Intake Rail Spacer ..................................... 147 J Jacks ..................................................13,47,60 Jack In A Pouch (Jack Hanger) ......... 65,149 Jack Stands ................................................ 13 Jacobs Ladders .............. 77,122,200,204,209 Quick Pin Kits ......................................... 126 Jam Nuts .............19,20,48,77,78,122,200,209 Jugs .......................................................10,107 K Kill Switch.................................................. 161 King Pins ...................76,134,174,203,208,224 Caps ................................................. 176,224 Bushings ...........................................122,176 Knee Guard .................................... 15,170,195 L Lap Timer System ............................... 105,117 Lash Wrenches ........................... 8,26,119,152 Leakdown Tester.......................... 118,152,210 Level Tray ................................................7,161 Lifters ........................................ 68,71,105,121 Lifter Valley Riser Tubes .......................24,146 Line Clamps ................................................ 19 Lubricants ..............................123,144,151,188 Hose Assembly Lube................................ 39 Penetrating..........................................66,172 Rear Axle................................................. 223 Lug Nut...................................................... 136 M Magic Seal ............................................. 123 Magnet .......................................................... 8 Magnetos ............................................123,133 Cap And Rotor ..................................123,133 Static Timer ............................................. 123 Transformer ............................................. 123 Main Bearing Cap ..................................... 156 Main Bearing Spacer .................................. 24 Master Cylinders Kits ................................................... 196,204 Mini Sprint/Kart ...................................... 218 Remote Reservoirs ......................28,196,218 Replacement Parts ................... 196,204,218 Metal Polish .............................................. 120 Mini Sprint Components................... 175,202, .................................................. 203,204,218 Moose Blocks ............................................. 13 Moly Paste ............................................26,126 Motor Mounts ......................................26,204 Motor Plates ..............................26,78,199,211 Motor Oil ....... 60,108,114,120,168,172,197,206 Mud Covers.................................... 31,176,214 Mud Release Solutions ................... 33,34,139 Mud Scrapers ............................................... 5 232 2010
225-240OW10_Lane.indd 232
M - Cont. Mufflers ...............................................181,190 Insert ....................................................... 181 N Neck Supports ............94,163,171,186,187,195 Nerf Bars .......................................96,200,203 Nets, Roll Cage ......................................... 171 Nose Wings ........................................200,204 Nose Wing Tray ........................................... 97 Nozzles Filter ........................................................ 209 Plugs ..................................................84,209 Nurf Bars ..................................................... 96 Nut And Washer Kit .................................. 212 Nyloc Nuts .................................................. 20 O Oil Bypass Eliminator .............................. 63,128 Drain Pan ......................... 14,32,114,159,206 Drain Pan ................................................ 138 Filter Adapters .............................. 53,63,128 Filter Block-Off Plate ..............53,63,128,145 Filter Bracket ........................................ 53,63 Filter By-Pass Plate ...................... 53,63,128 Filter Cutter ................................ 119,136,152 Filter Mounts, Remote .................. 53,63,191 Filter Pre-Filter Screen............................ 128 Filters............................. 111,128,145,191,219 Gear Oil ........................... 60,92,108,120,168, ............................................172,197,206,223 Inlet Fittings ................................. 14,128,145 Motor Oil ........... 60,108,114,120,168,172,206 Pans ................................... 62,64,72,127,150 Pan Gaskets ................................. 88,137,179 Pan Inspection Plug Kit ......................62,127 Preheaters ............................................... 128 Pressure Gauge Fitting ................. 30,86,146 Pump Fittings .......................35,40,41,45,145 Pumps ..................................... 53,62,145,191 Stud Kit ................................................... 127 Restrictors.....................................14,127,189 Stabilizer .................................... 120,151,194 Tank Heaters .....................................128,146 Tank Heater Plug..................................... 161 Tank Mounting Brackets .............. 24,146,175 Tanks And Fittings ... 24,35,40,41,45,146,175 Oil Eater....................................................... 33 P Paint ............................................... 80,147,207 Paint Markers .............................................. 12 Paper Towel Holder .............................. 97,148 Penetrating Lubricant ...........................66,172 Pills ....................................................... 99,213 Pinion Nut Assemblies, Posi-Lock ........... 224 Pistons ........................75,107,121,156,178,219 Piston Rings ..........97,107,121,142,178,188,198 Piston Ring Tools ..................9,47,152,188,198 Pit Gun .......................................................119 Pit Jacks .............................................13,47,60 Dirt Wing .............................................. 13,47 Pitman Arms ....................22,122,136,208,224 Plastic Cleaner ............................................ 33 Plastic Sheets ............................................. 16 Plastigauge ............................................... 188 Plugs And Caps (Fittings) ................ 10,36,41, ........................................... 43,44,45,139,174 Points Box Mounting Panel ................. 96,133
P - Cont. Polish, Magic Mix® .................................... 205 Poly Washers .............................................. 36 Porting Kits ............................................... 187 Positive Cam Lock Shifters And Cables .... 20 Power Steering Fluid..................... 66,95,108,115,168,172,190 Gears...................................................95,115 Mount Adapters ................................. 65,135 Pump And Adapter ...................... 95,115,190 Tank ................................................ 21,95,115 Top Plate ................................................... 96 Pre-Filters For 3" Crankcase Breather ..................... 141 For 600cc Mini Sprint ............................. 141 For Carbon Fiber Air Box ........................ 141 For Fuel Funnels ..................................... 141 For Fuel Injection .................................... 141 Prep Stand .................................................. 11 Proportioning Valves............................ 28,218 Punch And Flare Tool.................................... 4 Pushrods ...............................................68,124 Length Checker ...................................... 123 Pyrometers...................67,105,109,117,167,192 Q Quick Change Accessories And Components.......14,31,78, ...................................... 79,159,220,221,222 Breather Assembly ............................ 32,220 Cover Lock Kit .......................................... 31 Cover Nuts ..........................................31,211 Drain Pan ......................... 14,32,114,159,206 Gear Cover Gasket .............................. 31,88 Gear Covers ..................................... 221,222 Gear Poster ............................................. 222 Gear Sets .................... 159,180,220,222,223 Lower Shafts .................................... 220,221 Oil Plug Sockets And Wrenches ..... 159,222 Rear End Assemblies ........................ 78,220 Side Bell O-Ring ...................... 31,78,79,220 Thru Bolt Kit ....................................... 79,220 Quick Connect Battery Charging Posts 32,33 Quick Release Pins ................................... 131 Quick Turn Fasteners ............................ 17,131 Accessories..........................16,17,18,131,132 Mounting Brackets .............................. 17,131 Reinforcing Plates ............................... 17,131 Springs ................................................ 17,131 Wrenches ......................................... 5,16,131 Quick Release Steering Wheel Hubs ...... 21, ...............................................95,115,119,190 Qwik Release Hose Fittings ..............3,44,174 R Racer’s Tape ................................................. 6 Racing Radios......................................... 165 Racing Suits ......................................... 52,164 Racks, Storage 8-Piece Shock ........................................ 149 Adjustable Tire ........................................ 149 Fuel Jug.............................................. 65,148 Gear Case Storage ................................. 149 Torsion Bar .............................................. 149 Radiators .....................................64,87,95,175 Air Box....................................................... 96 Caps ..................................................... 26,64 Hose .......................................................... 26 Honey Comb Protector ................... 3,26,210 Repair Kit ............................................. 44,46
11/10/09 11:10:59 AM
INDEX R - Cont. Radiators - continued Rock Screen ............................................. 96 Super Coolant .....................................64,172 Radio Communication Systems And Accessories .............................162,165 Driver Listening-Only ..........................21,162 Radius Rods........................... 23,122,201,203 Brackets .................................................. 201 Radius “Rod Ruler”............................ 71,212 Ratchet Binder .............................................. 6 Ratchet Strap Holder .................................. 97 Rear Axle Lubricant .......................................... 108,223 Nut Wrench ........................................ 77,222 Nuts ..............................................77,211,224 Spacers .............................................. 77,224 Rear Bumper .................................96,200,203 Rear End Assemblies, Quick Change ............... 78,220 Components ..............................31,32,78,79, .................................... 109,211,220,221,222 Saver ....................................................... 209 Rear Main Seals ....................... 88,137,147,179 Rear Splined Wheel Center ................. 77,176, .................................................. 210,214,224 Remote Reservoirs (Master Cylinder).........................28,196,218 Restraints Arm ........................................ 94,103,164,186 Driver ..................................... 94,103,164,185 Head And Neck..............................61,94,100 Helmet ..................................... 61,93,164,186 Seat (Head, Shoulder, Leg)...........61,113,114 Sternum Protector .................................. 185 Rev Kit ......................................................... 70 Rim Shells ................................................. 214 Ring And Pinion Assemblies ...................... 78 Ring Compressor ............................. 47,50,152 Ring Filer .......................................... 9,152,188 Rivets .......................................................... 18 Guns ........................................................4,16 Rocker Arm Stud Girdles ............................ 26 Rod Ends........................... 47,48,158,200,209 Cone Spacers ......................................... 134 Seals ....................................................... 182 Roll Bar Padding ................ 15,107,119,167,186 Roll Cage Nets .................................... 171,186 Roller Rocker Arms ..........................68,71,191 Rotor Mounts .............................76,77,177,211 Rotors............................... 76,109,176,204,217 Rotor Heat Shield...................................... 167 RPM Module Kits ...................................... 133 S Safety Glasses .............................................. 5 Safety Wire .................................................... 5 Drill Jig ................................................. 5,212 Twister Pliers ............................................... 5 Scales..................................... 104,116,161,167 Cart ...................................................104,116 Pad Levelers ............................................116 Schrader Valves .......................................... 31 Scrub Bags ............................................... 141 Sealants .................................................... 144 Seats .............................................. 61,113,195 Lumbar Support ......................................114
S - Cont. Seats - continued Restraints ........................... 15,61,94,103,164 Set Up Blocks ............................................. 13 Shelves Aerosol Spray Can ............................. 65,148 All-Purpose Bottle ............................. 65,148 Helmet ..................................................... 148 Shield Protector ........................................ 166 Shifters And Cables .........................20,78,135 Shift Lever ........................................20,78,135 Shims (Spindle) ......................................... 135 Shock Absorbers ............................. 46,56,57, ........................................58,153,154,155,157 Bearing End ............................ 46,57,155,157 Bearing Mount ........................ 46,57,155,157 Bumper ........................................46,155,157 Cover/Protector .............23,56,75,7,141,1548 Dynamometer ......................................... 105 Extensions ......................................... 46,155 Inflators ...............................................58,118 Oil ................................................. 58,157,168 Pin Kit ................................................. 23,122 Rebuild Kits.........................................58,157 Tool Kit ................................................58,157 Tuning Kits ..........................................58,157 Work Station ........................................... 109 Shoes ....... 55,94,103,163,170,171,184,185,187 Shrink Sleeves .......................................... 130 Shut-Off Valves, Fuel ......................... 135,213 Silicone Sealer ...................................................... 205 Tape, Self Vulcanizing............................. 133 Slick Mist................................................... 120 Smart Level Tray .....................................7,161 Tool........................................................7,161 Snips ............................................................. 4 Socks ............................................. 94,171,184 Spacer Tray ................................................. 97 Spanner Wrench ..................... 46,109,155,157 Spark Plugs ................................. 47,66,73,139 Boot Heat Sleeve ..........129,130,132,133,194 Boot Protectors ......................... 130,132,194 Indexers ............................................... 9,130 Indexing Washers ................................... 130 Wire Sets ...................... 123,129,133,193,219 Wire Removal Tool ............................... 9,194 Speed Screen ........................................... 141 Spindles Midget ..................................................... 136 Mini Sprint ............................................... 203 Shorty.................................... 76,134,136,176 Nuts, Bearings, Shims ..........76,134,136,224 Springs Coil Over ......................... 87,100,158,179,196 Kit, Bump/Rubber .............................. 46,153 Tester ...................................................... 105 Stack Stands............................................... 13 Stagger Gauges ..................................... 14,31 Tape...................................................... 14,31 Steering Arms ..................... 21,22,76,122,177,208,224 Components ......................21,22,76,122,203 Gear .......................................................... 15 Gear Mount ................... 3,21,22,115,122,208 Wheels .....................61,109,119,190,201,209 Wheel Disconnects ......... 21,115,119,190,219 Wheel Kill Switch .................................... 161
S - Cont. Steering - continued Wheel Pad .............................. 21,114,119,190 Wheel Extension ....................................... 21 Sternum Protector .................................... 185 Stopwatch Clipboard .......................... 117,161 Stopwatches .................................... 5,118,166 Stud Girdles ........................................... 26,70 Straps, Tie Down .......................................... 6 Suits, Driving ................... 102,164,171,184,187 Support Clamps.......................................... 19 Support, Head, Leg And Shoulder (Seat) ....................... 15,61,113 Support, Neck Collars ... 103 ,163,171,186,195 Switches......................32,118,130,160,167,197 Switch Panels ................................ 32,118,160 T Tachometers ...................118,160,189,192,212 Mount ........................................................ 96 Tail Tank ........................................... 47,92,175 Bladders ............................................... 47,92 Cooler...................................................... 211 Tank Bleeder ............................................... 87 Tank, Power Steering .................................. 21 Taps .......................................................... 4,21 Tape Electrical ..................................................... 6 Gaffer’s........................................................ 6 Gun.............................................................. 6 Non-Skid ..................................................... 6 Racer’s ........................................................ 6 Shipping ...................................................... 6 Surface Guard ............................................ 6 Teflon....................................................... 138 Tape Measures ..........................13,31,116,161 Tear-Offs ........................................54,166,195 Thread Chaser ........................................... 4,9 Thread Files .................................................. 4 Thread Lockers And Sealant .........51,144,205 Throttle Arm ................................................... 122,209 Bell Crank...........................................20,209 Cable ......................................................... 20 Linkage Kit ....................................... 122,209 Pedal ............................................20,199,212 Tie Down Hangers .................................... 148 Tie Down Straps ........................................ 5,6 Tie Rods .................................................... 201 Tie Wraps ...................................................... 5 Timing Gear Drive ............................ 24,67,147 Timing Lights.........................................87,132 Timing Systems ....................... 60,105,117,161 Tires Bead Breakers ....................................12,136 Caliper ..................................................... 192 Cleaner .................................................... 151 Durometers .......................................104,161 Gauge Holder............................................ 97 Grinding Discs .......................................... 12 Groovers .............................................12,103 Markers ...............................................12,138 Prep Stand ................................................ 11 Pressure Gauges .............. 13,46,47,104,109, .......................................117,132,143,161,192 Pressure Relief Valves ........................ 72,114 Pyrometers............................117,126,167,192 Relief Pre-Setter Gauges.................... 31,114
2010
225-240OW10_Lane.indd 233
233
11/10/09 11:10:59 AM
INDEX T - Cont. Tires - continued Sander ....................................................... 12 Sipers ..................................................12,136 Spoons ...................................................... 12 Stagger Gauge..................................... 14,31 Stand ......................................................... 11 Tape Measurer ............................... 13,31,116 Tool.............................................................. 3 Treatments ..........................................34,151 Valve Core Tools .................................. 13,31 Toe Plate Kit .............................. 13,60,116,192 Tools Adjustable Wrench ................................... 11 Angle Finder ............................................ 150 Cam Bearing Installation ............................ 8 CC Kit ...................................................... 150 Chassis Level (Smart Tool) ...................7,161 Compression Tester .............................9,143 Cubic Inch Tester .................................... 150 Dial Calipers ................................................ 7 Dial Indicator ............................................... 7 Double Flare Tool ................................... 9,28 Drill Bits ...................................................4,16 Durometers ............................................. 161 Feeler Gauge Holder................................119 Feeler Gauges..................................8,26,119 Fuel Pressure Checker .......................27,210 Hose Clamp Pliers .................................. 225 Hose Cutter ................................................. 5 Impact Gun ..............................................119 Lash Wrenches .....................................8,119 Leakdown Tester........................ 118,152,210 Level Tray ..............................................7,161 Notchers ..................................................... 7 Oil Filter Cutters ......................... 119,136,152 Oil Plug Sockets And Wrenches, Quick Change ..................................14,159 Pinion Depth Checker ............................. 191 Pliers, Crimping ................................132,194 Punch And Flare ......................................... 4 Pushrod Length Checker........................ 123 Pyrometer .............................117,126,167,192 Quick Turn Fastener Wrench ........... 5,16,131 Radius â&#x20AC;&#x153;Rod Rulerâ&#x20AC;?............................ 71,212 Ring Filer ........................................ 9,152,188 Rivet Gun ................................................4,16 Rod Bolt Stretch Gauge ......................... 152 Rod Guide Tool ........................................... 9 Safety Wire Drill Jig.............................. 5,212 Safety Wire Twister Pliers ........................... 5 Snips ........................................................... 4 Socketless Fitting Assembly Tool ............ 39 Spanner Wrenches ............... 46,109,155,157 Spiral Lock Removal Tool ........................... 9 Stagger Gauges ........................................ 14 Tape Measures ........................13,31,116,161 Taps ........................................................ 4,21 Telescoping Magnet ................................... 8 Telescoping Mirror ...................................... 8 Thread Chaser/File .................................. 4,9 Threaded Tubing Ends.............................. 21 Timing Lights ......................................87,132 Tire Bead Breakers .............................12,136 Tire Caliper .............................................. 192 Tire Crayon..........................................12,138 Tire Prep Stand ......................................... 11 Tire Pressure Gauges .....................13,46,47, ................................ 104,117,132,143,161,192 234 2010
225-240OW10_Lane.indd 234
T - Cont. Tools - continued Tire Sander................................................ 12 Tire Sipers ...........................................12,136 Tire Spoons ............................................... 12 Toe Plate Kit ................................. 13,116,192 Torque Tube Checker ............................. 212 Tubing Bender........................................ 8,45 Tubing Cutters ....................................... 9,28 Tubing Notchers ......................................... 7 Wrench -AN (Dry Sump Hose Ends) ........ 11 Wrench Sets.............................................. 11 Valve Lash Wrenches ................................. 8 Valve Seat Pressure Testers ............. 119,132 Valve Spring Compressors ............ 9,132,152 Valve Spring Removal Tools ....................119 Valve Spring Tester .................... 119,150,152 Tool Tray ..................................................11,97 Top Wings ............................................96,204 Wing Tree .............................96,200,204,211 Torque Balls .................... 77,134,208,223,224 Collars .............................................. 134,224 Housings ...............................77,134,208,224 Housing Seal ........................................... 182 Shield ................................................... 61,96 Torque Tubes ..........................77,134,209,223 Hoop ....................................................... 199 Seals ....................................................... 182 Torsion Arms ........22,76,122,134,203,208,223 Torsion Bars ...................... 76,122,134,177,186 Bushings ............................... 76,122,177,203 Reamer .................................................... 212 Torsion Bar Plugs........................................ 11 Torsion Stops .......22,76,122,126,203,208,224 Towels ........................................................... 5 Track Mats .................................................. 11 Trailer Door Accessories ...............65,148,149 Transponder Mount .................................. 210 Tubing, Aluminum And Steel ......14,15,23,201 Bender.................................................... 7,45 Cutters ................................................... 9,28 Ends .......................................................... 21 Notchers ..................................................... 8 Tubular Bolts ............................................. 162 U U-Joint Assemblies ....................... 77,135,177 Underwear ................... 55,94,170,171,185,187 Upper Lube ................................................. 34 Utility Jugs ......................................92,107,175 V Valves ....................................................74,124 Cover Breathers ...................................... 129 Cover Gaskets ................... 24,25,88,129,137 Covers ....................... 25,59,128,175,201,210 Cover Stud Kits .................................129,137 Lash Caps ...................................... 70,74,123 Lash Wrenches ......................... 8,26,119,152 Locks................................. 70,74,105,110,124 Seat Pressure Testers....................... 119,132 Springs ...................................69,106,110,124 Spring Compressors ........................132,152 Spring Removal Tools ..............................119 Spring Tester ........................105,119,150,152 Trays (Valvetrain) ..................................... 107 Retainers ........................... 69,74,105,110,124 Valve Core Tool ................................ 13,31,117 Valve Stems .......................................31,74,89 Valve Stem Seals ........................................ 25 Van May Quick Fix Tool .............................. 14
T - Cont. Vibration Isolator Mounts (Points Box) ..... 133 W Warning Light Kits............................... 118,167 Wash Plugs .............................................. 3,10 Water Pumps ................................115,151,168 Water Treatment .................................... 64,66 Weather Stations ........................................ 67 Weld Bungs .............................. 44,84,109,225 Wheels ................................................176,214 Accessories ......................................176,214 Center, Rear Splined...... 77,176,210,214,224 Disconnects (Center Reliefs) ............... 31,72 Halves ...............................................176,214 Savers ..................................................... 177 Spacers ........................................ 77,134,136 Wrenches ......................................... 5,77,175 Windage Tray Screen............................62,127 Window Nets ....................................... 171,186 Wings ...................................................96,200 Adjuster ..........................................19,78,135 Caps .......................................................... 19 Components ..................78,122,135,200,210 Cylinders ........................................19,78,190 Nose ...................................................96,200 Slider Valve ..................................78,135,190 Top ............................................................ 96 Trees............................................ 96,200,211 Wire Separators .......................25,130,137,194 Wire Sleeve ........................... 129,130,132,194 Wiring Harness ..................................................... 33 Terminal Kit ............................................... 33 Wrenches Adjustable ................................................. 11 Quick Turn Fastener..............................5,131 Spanner................................. 46,109,155,157 Valve Lash ................................. 8,26,119,152 -AN (Dry Sump Hose Ends) ...................... 11 Wrench Sets.............................................. 11 Wrist Pin Retainers ................................... 219
11/10/09 11:10:59 AM
Lane Golf Shirts Golf shirts are short sleeve with a small Lane logo embroidered on the left chest. Available in black, gray or navy blue. From $16.95 Part No.
Color
Lane Fall/Spring Jacket LAP5000(size) Fall/Spring jacket has a small Lane logo embroidered on the left chest. Available in navy blue only. From $49.99
LAP1002............Black LAP1004............Gray LAP1005............Navy Blue
Lane Womanâ&#x20AC;&#x2122;s Golf Shirt LAP1010 Womanâ&#x20AC;&#x2122;s golf shirt has a small Lane logo embroidered on the left chest and is available in black only. $17.99
Lane Hat LAP500 Lane hat is white with black brim and has a large Lane logo printed on the front. $5.99
Lane Sweatshirts Sweatshirts have a small Lane logo embroidered on the left chest and are available in black or gray. Part No.
Color
Price
LAP100 LAP101
Black Gray
From $15.99 From $16.99
Allstar Performance T-Shirts T-shirts have a large Allstar logo on the back and small logo on the front left chest. Available black, red or gray. $9.99 Part No.
Color
ALL99902 ..........Black ALL99904 ..........Red ALL99906 ..........Gray
Lane Hooded Sweatshirt LAP1601 Pull-over hooded sweatshirt has a large Lane logo printed on the chest. Available in gray only. From $17.99
Allstar Performance Sweatshirt ALL99912 Sweatshirt has a small Allstar logo embroidered on the left chest. Available in black only. $19.99
Lane Winter Jacket LAP1204 Winter jacket has a small logo on the front left chest. Available in black only. From $36.99
Allstar Performance Hat ALL99951 Hat is black with a large Allstar logo embroidered on the front. Velcro size adjustment. $5.99
2010
225-240OW10_Lane.indd 235
235
11/10/09 11:10:59 AM
How To Order:
Shipping
By Phone
Lane Automotive Does Not have any hidden handling or service charges. We only charge you the transportation and insurance expenses.
This is the most common method and the one we prefer. Please have the part number, manufacturer, page number, description, size, color, right or left hand, and any other information that will help us to make sure you get the correct parts. We will also need a complete shipping address (Sorry, no P.O. Boxes) and the type of payment, Visa, Mastercard, C.O.D., etc.
By Mail If you decide to order by mail, we need all of the above information plus a daytime phone number where you may be reached in case any additional information is needed.
By Fax Simply fax your order to our Fax number (269)-463-6708 or (800)772-2618. Be sure to include all the above information.
Special Orders/Custom-Built Parts We take pride in our handling of special orders and strive to provide the quickest service possible. All special orders are placed with the manufacturer promptly in order to facilitate a speedy delivery. As a rule, special orders cannot be cancelled once the order is placed with the manufacturer. All special orders are subject to freight and handling charges from the manufacturer. A signed build sheet must accompany all orders for custom-built parts (pistons, rods, rear ends, race suits, etc.). • Special Orders require a 50% non-refundable deposit before order will be placed. • Custom-Built Parts require 100% pre-payment before order is placed. • No returns will be accepted on special orders and custom-built items.
Payment Method The easiest way to pay for your parts is to use your credit card. We accept Visa, Mastercard, and Discover. Money Orders, Cashier’s Checks, and Certified Checks are other methods of payment that may be used. Use of any of these will allow orders to be shipped immediately. We also ship orders C.O.D. via regular UPS and FedEx. You will be billed for the total invoice amount which includes shipping and C.O.D. fees. The Driver will accept Certified Check only. Personal Checks will not be accepted unless you have applied for and received prior Written Approval from our Credit Manager.
Truck Freight Large or heavy items that cannot be shipped by UPS or FedEx will be shipped by Truck Freight. We Do Not Ship by Bus. Truck Freight ships within 48 hours and you can pay shipping charges in one of two ways: • Freight Collect – You pay the truck driver for the freight charges when the parts are delivered. • Freight Pre-Paid – charges are paid in advance by credit card. • No C.O.D. on truck freight. Note: Allstar Aluminum Sheets require a custom sized pallet/skid for shipment. There is a $45 skid charge for this with a minimum order quantity on the Aluminum of six sheets
Please Note: IMPORTANT If there are any questions concerning quantity or condition of parts at time of delivery, it must be noted on the Carrier Delivery Receipt. Parcel delivery services require that packages be retained for carrier inspection.
How To Return Items In the event you have merchandise you need to return please refer to the following guidelines. • All merchandise to be returned must be in its original packaging and accompanied by the original invoice. The product must have been purchased from Lane Automotive and be unused, unaltered and unchanged from its original state. • Please DO NOT write on, use tape, or affix any item to the product package itself. Authorized returned items will be placed back into inventory to be resold and we can’t sell items with defaced packaging. • Returned parts must be stocking items and in current packaging. • Discontinued parts and parts in out-of-date packaging cannot be returned. • Stocking items returned may be subject to a restocking fee. • We do not accept returns on special order, non-stock, or custom-built items. • Any merchandise returned that does not meet any of the above criteria may be subject to an additional handling fee or refusal.
Warranty Warranty of parts is governed by the manufacturer’s policy and may require inspection by a factory representative before a refund, repair or exchange can be authorized. Some manufacturers have no warranty policy therefore some parts are not covered.
Disclaimer Of Warranty Lane Automotive, Inc. makes no warranties, either express or implied, including any warranty of merchantability of or fitness for a particular purpose. There is no warranty expressed or implied as to whether the goods sold hereby will protect purchaser or ultimate user of such goods from injury or death. Racing is a dangerous activity and the user shall determine the suitability and safety of the product for its intended use, and the user assumes all responsibility and risk in connection there within.
236
2010
225-240OW10_Lane.indd 236
11/10/09 11:11:38 AM
Items That Require Additional Shipping Charges
Notes For Large Packages
Special Handling
Shipping charges for very large packages are invoiced according to dimension rather than actual weight. For example, running boards are shipped in very large boxes. Their actual weight is less than 25 lbs. but their dimensional weight (a figure based upon the overall displacement of the package) when calculated by parcel shippers may exceed 50 lbs. The invoiced shipping amount will be based upon carrier calculations, not 25 lbs. There may be an additional large package surcharge.
We are happy to accommodate special shipping requirements you may have such as Next Day Air, 2nd Day Air and Truck. These charges are billed to you at their actual cost.
Printing Errors
Some items in this catalog require additional shipping charges. These items are marked with the appropriate icon. Unless pre-paid with a credit card, these will be shipped freight collect and there will be a freight balance due upon delivery of order.
Errors in typographical content, pricing and photography are subject to correction and may change without notice.
Continental United States Scheduled Delivery Days From Lane Automotive Use the Scheduled Delivery Days Map to the right to determine the estimated delivery time of a package. Within the continental United States, ground packages will be routed using the parcel service that can provide the most efficient and economical time in transit for your particular order. The map represents the routing and the number of days to allow for an order, based upon your geographic location. If you need help determining when a shipment will arrive, please call and we'll be glad to provide tracking numbers and other vital information. For an additional charge, we can send orders via 1-, 2- or 3-Day Service, and by Truck Freight. Small Package Ground - orders received by 5 P.M. EST are usually shipped the same day.
Order By Phone: 1-800-772-5266 Store Hours: 9:00 A.M. - 6:00 P.M. EST â&#x20AC;&#x201C; M-F Local Phone: 1-269-463-LANE 9:00 A.M. - 2:00 P.M. EST â&#x20AC;&#x201C; Saturday Fax Line: 1-800-772-2618 Address: 8300 Lane Drive, Watervliet MI 49098
2010
225-240OW10_Lane.indd 237
237
11/10/09 11:11:41 AM
Performance In Miniature
Performance Maximum
Visit Our Stunning Collectables Showroom
Visit Our State-Of-The-Art Showroom
One of the largest die-cast collectible dealers in the country, Lane Collectables offers a full line of die cast cars and hot rods in the extremely popular 1/24 and 1/18 scale. Lane Collectables’ inventory is constantly growing, adding hard to find, limited items, including the superb Exact Detail Series, crafted to fulfill the needs of even the most discerning collector.
We take a great deal of pride in our showroom, our outstanding selection of hot rod parts and accessories, and our knowledgeable sales staff, many of whom are hot rod enthusiasts themselves. They are ready and waiting to show you the items you need and to answer any questions you may have. With over 40 years in the business, our commitment to quality parts and quality service is stronger than ever! You have our word on that! So if you’re building a hot rod, we’ve got the parts you need!
Direct Distributors Of:
Where is Lane Automotive? We’re conveniently located, just a short drive away from these major metropolitan locations. Detroit ................ 160 Miles Indianapolis ..... 180 Miles Grand Rapids .... 80 Miles Fort Wayne ...... 150 Miles Kalamazoo ........ 40 Miles South Bend ...... 40 Miles Chicago ............. 100 Miles Toledo .............. 160 Miles
8300 Lane Drive Watervliet, MI 49098
Order Toll Free: 800-772-2682 Call for a Catalog: 269-463-4113 Fax: 800-772-2618 Website: www.lanecollectables.com E-mail: lcsales@lanecollectables.com 8300 Lane Drive • Watervliet, MI 49098 238
2010
225-240OW10_Lane.indd 238
11/10/09 11:11:46 AM
NEW!
NEW!
2010
225-240OW10_Lane.indd 239
239
11/12/09 11:49:16 AM
READY TO BUILD? READY TO RACE?
READY TO WIN? Then Youâ&#x20AC;&#x2122;re Ready For Allstar Performance Parts! Cody Darrah
Bryan Clauson Photo By: Jim DenHamer
ALL55000, ALL55002
ALL55010, ALL55012
ALL55062, ALL55060
ALL55040, ALL55042
Aluminum Front Torsion Arms
Aluminum Rear Torsion Arms
Aluminum Steering Arms
Aluminum Birdcages
ALL55020
Aluminum Rear Torsion Stop
ALL55070, ALL55072
Aluminum Brake Mounts
ALL52115, ALL52116, ALL52117
Aluminum Steering Mounts
VISIT ALLSTARPERFORMANCE.COM FOR WEEKLY UPDATES! Here is a sampling of the more than 3,000 Allstar Performance specialty parts and tools, many specifically engineered for the short track racer. In the shop, at the track, updating the current car or building a new car, Allstar is ready to help. Call or visit the Allstar website for our new catalog. Available at performance parts dealers worldwide.
269-463-8000
240 2010 www.allstarperformance.com
225-240OW10_Lane.indd 240
11/10/09 11:12:01 AM
NEW VENDOR
SB Chevy Motown Cast Iron Engine Blocks No more junk yard searches! High-density, four-bolt main blocks are 100% compatible with stock components and feature expanded water jackets, priority main bearing oiling system and indexed lifter bores. Motown Race Block has “splayed” steel billet four-bolt main caps. Blocks listed must be “prepped” before assembly. Part No.
Description
WRD084010 Motown Block WRD084020 Motown Block WRD084030 Motown Block WRD084130 Motown Race Block
Main Caps
Bore
Main
Deck Height
Nodular Iron Nodular Iron Nodular Iron Splayed Billet
3.990" 4.115" 4.115" 4.115"
350 350 400 400
9.025" 9.025" 9.025" 9.025"
SB Chevy Motown Lite Aluminum Engine Blocks The Motown Lite’s horizontal ribs stabilize and strengthen the cylinder walls. Other features include priority main bearing oiling, splayed billet steel main caps, heavy duty main bulkheads, and internal reinforcement ribs that reinforce the block and cross-feed the lifter bores. Available with 350 or 400 main bearing sizing. Blocks listed below must be “prepped” before assembly. Part No.
Description
Main Caps
Bore
Main
Deck Height
WRD084520 WRD084530
Motown Lite Motown Lite
Splayed Billet Splayed Billet
4.115" 4.115"
350 400
9.025" 9.025"
Reusable Steel Hose Ends For Brake, Clutch Or Instrument Lines Maximum high pressure hose ends are engineered for XRP Teflon hose and may be used for brake, clutch and instrument lines, and power steering.
Weld Bungs
Size
Fem. Weld Bung ORB
Male Weld Bung
-4 -6 -8 -10 -12 -16 -20
XRP987104 XRP987106 XRP987108 XRP987110 XRP987112 XRP987116 XRP987120
XRP997104 XRP997106 XRP997108 XRP997110 XRP997112 XRP997116 XRP997120
Pipe Size Fem. Pipe Weld Bung
1/8" 1/4" 3/8" 1/2" 3/4" 1"
Ensure Hose Clamps and Pliers Use self-tensioning hose clamps with push-on hose ends to provide a tight, leak-proof seal without damaging the hose. Clamps come in four pack. Part No.
Description
Clamps XRP818404 .......-4AN Clamp XRP818406 .......-6AN Clamp XRP818408 .......-8AN Clamp XRP818410 .......-10AN Clamp XRP818412 .......-12AN Clamp Ensure Hose Clamp Pliers XRP818000 .......Ensure Hose Clamp Pliers
Fuel Pressure Take-Off Adapters Part No.
Description
XRP700192 .......-6 Male to -6 Male XRP700193 .......-6 Male to 1/4" Male NPT XRP700194 .......-6 Male to 3/8" Male NPT XRP700195 .......-6 Male to -6 Female Swivel XRP700196 .......-8 Male to -8 Male XRP700198 .......-8 Male to 3/8" Male NPT XRP700199 .......-8 Male to -8 Female Swivel XRP700201 .......-10 Male to -10 Male XRP700202 .......-10 Male to -10 Female Swivel Note: All adapters have 1/8" NPT port.
225-240OW10_Motor.indd 225
XRP996701 XRP996702 XRP996703 XRP996704 XRP996706 XRP996810
Size
Straight
45° Tube
90° Tube
-3AN -4AN
XRP600003 XRP600004
XRP604503 –
XRP609003 XRP609004
Assembled Stainless Steel Braided Teflon Hose With Fittings Ready to install lines have crimped and swaged ends for use in brake, clutch or instrument systems. Choice of straight fittings on both ends, or straight on one end and 90° on the other, in a variety of lengths. Length
Straight to Straight -3AN
Straight to Straight -4AN
90° to Straight -3AN
9" 12" 15" 18" 20" 21" 24" 27" 30" 33" 36" 42" 45" 50" 72"
XRP630009 XRP630012 XRP630015 XRP630018 XRP630020 XRP630021 XRP630024 XRP630027 XRP630030 XRP630033 XRP630036 XRP630042 XRP630045 XRP630050 –
– XRP640012 XRP640015 XRP640018 – – XRP640024 – – – XRP640036 – – XRP640050 XRP640072
– XRP639012 – – – – XRP639024 – – – XRP639036 – – XRP639050 –
Gauge Adapters Part No.
Description
XRP705003 .......Steel Straight -3 Male To 1/8" NPT Female XRP705004 .......Steel Straight -4 Male To 1/8" NPT Female XRP705090 .......Steel 90° Steel -4 Male To 1/8" NPT Female XRP705093 .......Steel 90° Steel -3 Male To 1/8" NPT Female XRP795003 .......Aluminum Straight -3 Male To 1/8" NPT Female XRP795004 .......Aluminum Straight -4 Male To 1/8" NPT Female 2010
225
11/10/09 11:04:29 AM
Stainless Steel Braided CPE Race Hose Stainless steel outer braid delivers durability, heat resistance and great looks. The elastomer chlorinated polyethylene (CPE) inner tube is compatible with a wide range of liquids. Size
I.D.
O.D.
3 Feet
6 Feet
10 Feet
15 Feet
20 Feet
-6 -8 -10 -12
.344" .438" .562" .688"
.547" .641" .797" .928"
XRP300306 XRP300308 XRP300310 XRP300312
XRP300606 XRP300608 XRP300610 XRP300612
XRP301006 XRP301008 XRP301010 XRP301012
XRP301506 XRP301508 XRP301510 XRP301512
XRP302006 XRP302008 XRP302010 XRP302012
Aluminum Hose Ends XRP hose ends are aviation nipple and cutter style to prevent blow off and leakage problems. Fittings are built from heat treated aluminum and are race ready. Notes: Double Swivel Style Ends Are Triple Sealed And Adjustable After Assembly To Hose. All Hose Ends Are JIC 37°.
Straight Hose Ends Part No.
Size Part No.
XRP100004 .......-4 XRP100006 .......-6 XRP100008 .......-8 Swivel Part No.
30° Hose End XRP203006 XRP203008 XRP203010 XRP203012 XRP203016 45° Hose End – XRP204506 XRP204508 XRP204510 XRP204512 XRP204516 60° Hose End – XRP206006 XRP206008 XRP206010 XRP206012 XRP206016 90° Hose End – XRP209006 XRP209008 XRP209010 XRP209012 XRP209016 120° Hose End – XRP212006 XRP212008 XRP212010 XRP212012 XRP212016 150° Hose End XRP215006 XRP215008 XRP215010 XRP215012 XRP215016 180° Hose End – XRP218006 XRP218008 XRP218010 XRP218012 XRP218016
226
Size
XRP100010 ....... -10 XRP100012 ....... -12 XRP100016 ....... -16 Non-Swivel Part No.
Size
XRP103006 XRP103008 XRP103010 XRP103012 –
-6 -8 -10 -12 -16
XRP104504 XRP104506 XRP104508 XRP104510 XRP104512 XRP104516
-4 -6 -8 -10 -12 -16
XRP106004 XRP106006 XRP106008 XRP106010 XRP106012 XRP106016
-4 -6 -8 -10 -12 -16
XRP109004 XRP109006 XRP109008 XRP109010 XRP109012 XRP109016
-4 -6 -8 -10 -12 -16
XRP112004 XRP112006 XRP112008 XRP112010 XRP112012 XRP112016
-4 -6 -8 -10 -12 -16
XRP115006 XRP115008 XRP115010 XRP115012 XRP115016
-6 -8 -10 -12 -16
XRP118004 XRP118006 XRP118008 XRP118010 XRP118012 XRP118016
-4 -6 -8 -10 -12 -16
Double Swivel Forged Hose Ends Size
45° Part No.
90° Part No.
-6 -8 -10 -12
XRP204606 XRP204608 XRP204610 XRP204612
XRP209106 XRP209108 XRP209110 XRP209112
Aluminum Push-On Hose Ends Machined from aluminum alloy with red and blue anodized finish, hose ends are only compatible with push-on hose, NOT stainless steel braided hose. All hose ends are JIC 37°. See page 225 for push-on hose clamps and pliers.
Part No.
Size
Straight XRP230004 .............. -4 XRP230006 .............. -6 XRP230008 .............. -8 XRP230010 .............. -10 XRP230012 .............. -12
Part No.
Part No.
Size
45° XRP234504 .............. -4 XRP234506 .............. -6 XRP234508 .............. -8 XRP234510 .............. -10 XRP234512 .............. -12
Size
Part No.
Part No.
Size
60° XRP236004 .............. -4 XRP236006 .............. -6 XRP236008 .............. -8 XRP236010 .............. -10 XRP236012 .............. -12
Size
90° XRP239004 .............. -4 XRP239006 .............. -6 XRP239008 .............. -8 XRP239010 .............. -10 XRP239012 .............. -12
120° XRP231204 .............. -4 XRP231206 .............. -6 XRP231208 .............. -8 XRP231210 .............. -10 XRP231212 .............. -12
Part No.
Part No.
Size
150° XRP231504 .............. -4 XRP231506 .............. -6 XRP231508 .............. -8 XRP231510 .............. -10 XRP231512 .............. -12
Size
180° XRP231806 .............. -6 XRP231808 .............. -8 XRP231810 .............. -10 XRP231812 .............. -12
2010
225-240OW10_Motor.indd 226
11/10/09 11:04:48 AM
Aluminum Adapter Fittings Known for their rapid response to the specialized needs of racers, XRP, Inc. has formed a close working relationship with many professional and amateur teams in all forms of motorsports. XRP’s quality fittings are the result of this relationship. Part No
AN Size
Flare Bulkhead Tee On Run XRP980403 .............. -3 XRP980404 .............. -4 XRP980406 .............. -6 XRP980410 .............. -10 Flare Plug XRP980604 .............. -4 XRP980606 .............. -6 XRP980608 .............. -8 XRP980610 .............. -10 XRP980612 .............. -12 XRP980616 .............. -16 Straight Thread Port Plug XRP981406 .............. -6 XRP981408 .............. -8 XRP981410 .............. -10 XRP981412 .............. -12 XRP981416 .............. -16 Male Flare Union XRP981503 .............. -3 XRP981504 .............. -4 XRP981506 .............. -6 XRP981508 .............. -8 XRP981510 .............. -10 XRP981512 .............. -12 XRP981516 .............. -16 Tube Nut XRP981803-6 ........... -3 (6-Pk.) XRP981804-6 ........... -4 (6-Pk.) XRP981806-2 ........... -6 (2-Pk.) XRP981808 .............. -8 XRP981810 .............. -10 Tube Sleeve XRP981903-6 ........... -3 (6-Pk.) XRP981904-6 ........... -4 (6-Pk.) XRP981906-2 ........... -6 (2-Pk.) XRP981908 .............. -8 XRP981910 .............. -10 90° Flare Union XRP982103 .............. -3 XRP982106 .............. -6 XRP982108 .............. -8 XRP982110 .............. -10 XRP982112 .............. -12 Flared Tee XRP982403 .............. -3 XRP982404 .............. -4 XRP982406 .............. -6 XRP982408 .............. -8 XRP982410 .............. -10 Part No
Pipe Size
Part No
AN Size
Flare Bulkhead XRP983204 .............. -4 XRP983206 .............. -6 XRP983208 .............. -8 XRP983210 .............. -10 XRP983212 .............. -12 XRP983216 .............. -16 90° Flare Bulkhead XRP983303 .............. -3 XRP983306 .............. -6 XRP983308 .............. -8 XRP983310 .............. -10 XRP983312 .............. -12 Flare Bulkhead Tee XRP983403 .............. -3 XRP983406 .............. -6 45° Flare Bulkhead XRP983703 .............. -3 XRP983706 .............. -6 XRP983708 .............. -8 XRP983710 .............. -10 Flare Reducer XRP991902 .............. -4-3 XRP991906 .............. -6-4 XRP991908 .............. -8-4 XRP991912 .............. -8-6 XRP991914 .............. -10-6 XRP991915 .............. -10-8 XRP991918 .............. -12-6 XRP991919 .............. -12-8 XRP991920 .............. -12-10 XRP991922 .............. -16-10 XRP991923 .............. -16-12 XRP991926 .............. -20-16 Pipe Bushing Reducer Part No.
Male to Female
XRP991201 .............. 1/4" .........1/8" XRP991202 .............. 3/8" .........1/4" XRP991203 .............. 3/8" .........1/8" XRP991204 .............. 1/2" .........3/8" XRP991205 .............. 1/2" .........1/4" XRP991206 .............. 1/2" .........1/8" XRP991207 .............. 3/4" .........1/2" XRP991208 .............. 3/4" .........3/8" XRP991209 .............. 3/4" .........1/4" XRP991210 .............. 1" ............3/4" XRP991212 .............. 1" ............3/8" AN Flare To Pipe Adapter
AN Size
Male Branch Tee XRP982503 .............. 1/8" ............... -3 XRP982504 .............. 1/8" ............... -4 XRP982506 .............. 1/4" ............... -6 XRP982508 .............. 3/8" ............... -8 XRP982510 .............. 1/2" ............... -10 Male Run Tee XRP982603 .............. 1/8" ............... -3 XRP982604 .............. 1/8" ............... -4 XRP982606 .............. 1/4" ............... -6 XRP982608 .............. 3/8" ............... -8 XRP982610 .............. 1/2" ............... -10 XRP982612 .............. 3/4" ............... -12
Flare Pipe Size Size
Straight Flare to Pipe
45° Elbow Flare to Pipe
90° Elbow Flare to Pipe
-3 -3 -4 -4 -4 -6 -6 -6 -6 -8 -8 -8 -8 -10 -10 -10 -12 -12 -16 -20
XRP981603 XRP981634 XRP981604 XRP981644 XRP981646 XRP981662 XRP981606 XRP981666 XRP981668 XRP981607 XRP981608 XRP981688 XRP981609 XRP981611 XRP981610 XRP981613 XRP981614 XRP981612 XRP981617 XRP981621
XRP982303 – XRP982304 – – – XRP982306 XRP982366 – – XRP982308 XRP982388 – XRP982311 XRP982310 – XRP982314 XRP982312 XRP982317 –
XRP982203 – XRP982204 XRP982244 – XRP982262 XRP982206 XRP982266 XRP982268 XRP982207 XRP982208 XRP982288 XRP982209 XRP982211 XRP982210 XRP982213 XRP982214 XRP982212 XRP982217 –
1/8" 1/4" 1/8" 1/4" 3/8" 1/8" 1/4" 3/8" 1/2" 1/4" 3/8" 1/2" 3/4" 3/8" 1/2" 3/4" 1/2" 3/4" 3/4" 1"
2010
225-240OW10_Motor.indd 227
227
11/10/09 11:05:06 AM
Aluminum Adapter Fittings Part No
Pipe Size
Female Pipe Union XRP991001 .............. 1/8" XRP991002 .............. 1/4" XRP991003 .............. 3/8" XRP991004 .............. 1/2" XRP991006 .............. 3/4" Male Pipe Nipple XRP991101 .............. 1/8" XRP991102 .............. 1/4" XRP991103 .............. 3/8" XRP991104 .............. 1/2" XRP991106 .............. 3/4" Allen Socket Plug XRP993201* ............. 1/16" XRP993202* ............. 1/8" XRP993203* ............. 1/4" XRP993204* ............. 3/8" XRP993205 .............. 1/2" XRP993206 .............. 3/4" XRP993207 .............. 1" Female Pipe Tee XRP991701 .............. 1/8" XRP991702 .............. 1/4" XRP991703 .............. 3/8" XRP991704 .............. 1/2" XRP991706 .............. 3/4" Bulkhead Nut Part No
AN Size
Thread Size
AN Size
XRP992903 .............. -3 XRP992904 .............. -4 XRP992906 .............. -6 XRP992908 .............. -8 XRP992910 .............. -10 XRP992912 .............. -12 XRP992916 .............. -16 XRP992920 .............. -20 Female To Male Flare Seal Expanders Part No.
AN Size
AN Size
XRP995104† ............. -3 .....................-4 XRP995106 .............. -4 .....................-6 XRP995108 .............. -6 .....................-8 XRP995110 .............. -8 .....................-10 XRP995112 .............. -10 ...................-12 XRP995116 .............. -12 ...................-16 Female To Male Flare Seal Reducers Part No.
AN Size
AN Size
XRP995004† ............. -4 .....................-3 XRP995006 .............. -6 .....................-4 XRP995008 .............. -8 .....................-6 XRP995010 .............. -10 ...................-6 XRP995011 .............. -10 ...................-8 XRP995012 .............. -12 ...................-8 XRP995013 .............. -12 ...................-10 XRP995016 .............. -16 ...................-10 XRP995017 .............. -16 ...................-12 XRP995020 .............. -20 ...................-16 Notes: Female Side Seals Internally On Flare Nose Of Mating Male Fitting No O-Ring Necessary. *Sold Per Pair. †Steel Expander.
228
2010
225-240OW10_Motor.indd 228
Straight
45°
90°
XRP980006 XRP980068 XRP980086 XRP980008 XRP980081 XRP980009 XRP980010 XRP980011 XRP980013 XRP980012 XRP980014 XRP980016
XRP984506 XRP984568 XRP984586 XRP984508 XRP984581 XRP984509 XRP984510 XRP984511 XRP984513 XRP984512 XRP984514 XRP984516
XRP989006 XRP989068 XRP989086 XRP989008 XRP989081 XRP989009 XRP989010 XRP989011 XRP989013 XRP989012 XRP989014 XRP989016
Part No.
XRP992403 .............. -3 .....................3/8"-24 XRP992404 .............. -4 .....................7/16"-20 XRP992406 .............. -6 .....................9/16"-18 XRP992408 .............. -8 .....................3/4"-16 XRP992410 .............. -10 ...................7/8"-14 XRP992412 .............. -12 ...................1-1/16"-12 XRP992416 .............. -16 ...................1-5/16"-12 37° Flare Cap Female Part No
Male Flare To O-Ring Boss (High Flow Contour ORB) Male Sz. Port Sz.
-6 -6 -8 -8 -8 -10 -10 -10 -12 -12 -16 -16
-6 -8 -6 -8 -10 -8 -10 -12 -10 -12 -12 -16
AN Size
Straight Female Flare Swivel XRP900104 .............. -4 XRP900106 .............. -6 XRP900108 .............. -8 XRP900186 .............. -8 to -6 XRP900110 .............. -10 XRP900112 .............. -12 XRP900116 .............. -16 45° Female Swivel Coupling XRP924506 .............. -6 XRP924508 .............. -8 XRP924510 .............. -10 XRP924512 .............. -12 90° Female Swivel Coupling XRP929006 .............. -6 XRP929008 .............. -8 XRP929010 .............. -10 XRP929012 .............. -12 Tee Male Flare To Female Swivel On Side XRP900204 .............. -4 XRP900206 .............. -6 XRP900208 .............. -8 XRP900210 .............. -10 XRP900212 .............. -12 AN Tee Female Swivel On Run XRP900303 .............. -3 XRP900304 .............. -4 XRP900306 .............. -6 XRP900308 .............. -8 XRP900310 .............. -10 XRP900312 .............. -12 XRP900316 .............. -16 45° Female Swivel To Male Flare XRP920406 .............. -6 XRP920408 .............. -8 XRP920410 .............. -10 XRP920412 .............. -12 XRP920416 .............. -16 90° Female Swivel To Male Flare Tube
Forged
AN Size
XRP920504 ........XRP900504 .......-4 XRP920506 ........XRP900506 .......-6 XRP920508 ........XRP900508 .......-8 XRP920510 ........XRP900510 .......-10 XRP920512 ........XRP900512 .......-12 XRP920516 ........XRP900516 .......-16 Straight Female Flare To Pipe Part No.
AN Size
NPT Size
XRP900641 (Steel).... -4 ............. 1/8" XRP900604 .............. -4 ............. 1/8" XRP900662 .............. -6 ............. 1/8" XRP900606 .............. -6 ............. 1/4" XRP900666 .............. -6 ............. 3/8" XRP900667 .............. -8 ............. 1/4" XRP900608 .............. -8 ............. 3/8" XRP900688 .............. -8 ............. 1/2" XRP900610 .............. -10 ........... 1/2" XRP900611 .............. -10 ........... 3/8" XRP900614 .............. -12 ........... 1/2"
11/10/09 11:05:28 AM
Spark Plug Heat Range/Cross Reference Thread Size/Reach
Hex
Heat Range
Accel
Standard Non-Resistor Spark Plugs Autolite Champion Denso
NGK
Accel
Power/Projected Tip Non-Resistor Spark Plugs Autolite Champion Denso NGK
Chevrolet, Chrysler (Wedge), Oldsmobile, Pontiac - Standard Reach - Flat Seat With Gasket Hot – – – – – ACL0138 – – – – – – – – – ACL0137 AUT75 – – NGKR5670-5 14mm / 3/8" 13/16" ACL0124 – – – NGKB6S ACL0134 AUTAR73 – – NGKR5670-6 ACL0123 AUT353 – – NGKB7S – AUTAR72 CHPJ63Y – NGKR5670-7 Cold – – – – NGKB8S – – – – NGKR5670-8 Chevrolet (Big Block), Chrysler (Hemi) - Flat Seat With Gasket Hot – – – – – – – – DENIK16 – – – – – – – – – DENIK20 – – AUTAR3935 – – NGKR5671A-7 – – CHPC63YC DENIK22 – 14mm / 3/4" 5/8" – AUTAR3934 CHPC61CX – NGKR5671A-8 – AUTAR3911 CHPC61YC DENIK24 NGKR5672A-8 – AUTAR3933 CHPC59CX – NGKR5671A-9 – AUTAR3910 CHPC59YC DENIK27 NGKR5672A-9 – AUTAR3932 CHPC57CX – NGKR5671A-10 – – – DENIK31 NGKR5672A-10 Cold – – CHPC55CX – NGKR5671A-11 – – – – – Chevrolet (Big Block), Chrysler (Hemi) - Flat Seat With Gasket Hot ACL0146 – – – – ACL0116 – – DENIW16 NGKBP5ES – AUTAR2593 – DENIW24 NGKR6061-9 ACL0114 – – – NGKBP6ES 14mm / 3/4" 13/16" ACL0143 AUTAR2592 – DENIW27 NGKR6061-10 ACL0113 AUTAR53 – – NGKBP7ES ACL0142 – CHPN4C DENIW31 NGKR6061-11 ACL0112 AUTAR52 – – NGKBP8ES Cold ACL0141 – – – – ACL0111 AUTAR51 – – NGKBP9ES Chevrolet (Small Block), Ford (Small Block) - Conical/Tapered Seat Hot – – – – – ACL0276* – – DENITF16 – – – – – NGKR5673-6 ACL0274 – – DENITF20 NGKR5674-6 ACL0265 AUTAR135 CHPV63C – NGKR5673-7 ACL0272 AUTAR13 – DENITF22 NGKR5674-7 14mm /.460" 5/8" – AUTAR134 – DENITF24 – – AUTAR12 – – NGKR5674-8 ACL0263 AUTAR133 – – NGKR5673-8 – – – – NGKR5674-9 ACL0262 AUTAR132 CHPV59C DENITF27 NGKR5673-9 – – CHPV59YC – NGKR5674-10 Cold ACL0261 – CHPV57C – NGKR5673-10 – – CHPV57YC – – Chevrolet (Big Block), Ford - Conical/Tapered Seat Hot – – – – – – – – DENIT16 – – – – – – – – – DENIT20 – – – – – – – – – DENIT22 – 14mm /.708" 5/8" – – – – – – AUTAR94 – DENIT24 NGKR5724-8 – AUTAR474 – – – – AUTAR93 CHPS59YC DENIT27 NGKR5724-9 – AUTAR473 CHPS59C – – – AUTAR92 CHPS57YC – NGKR5724-10 Cold – AUTAR472 CHPS57C – – – – – – – Ford (Windsor and Big Block) - Conical/Tapered Seat Hot – – – – – ACL0378 AUT45 – – – – – – – – ACL0375 AUTAR33 – – NGKAP7FS 18mm /.460" 13/16" – – – – – – AUTAR32 – – NGKAP8FS Cold – – – – – – – – – – Notes: Use cross reference chart as a guide only. Due to differences in design and material, plugs listed in cross reference section are not exactly alike. *Substitute ACL0276S for “shorty” spark plug.
Spark Plug Heat Range Tech • Determine the thread diameter, length (reach) and whether tapered or gasket (flat) seat. • Select gap style. Spark Plug Diagnosis • Select heat range. • Adjust fuel mixture and spark advance timing for maximum performance. • Inspect plugs and pistons for evidence of detonation, abnormal combustion or excessive temperatures. • Stay with the same plug type after final heat range selection unless major modifications have been made (increasing the horsepower or operating range). Normal Fuel Fouled
Pictures Courtesy Of Autolite
Detonation
Oil Fouled
A spark plug’s Heat Range, defined as the measure of how fast the tip of the plug dissipates combustion heat, can range from as low as 500°F to as high as 2,500°F. Manufacturers offer plugs in many heat ranges, from cold through medium hot, to very hot. It is imperative that the plug stay cool enough to prevent pre-ignition or electrode destruction, and still remain hot enough to burn off combustion deposits that form at the firing tip. A plug that is excessively cold or hot for the application in question will eventually cause the engine to misfire. When working with an engine that is stock or mildly modified, it is often best to use the plug recommended by the car manufacturer. However, if the compression ratio has been altered, a different heat range plug may be required. Many racers rely upon their engine builder for plug heat range recommendations. If a racer is unsure of the correct heat range to use, it is always recommended to “stay on the safe side” and use a colder plug. A switch in heat range can change the temperature of the spark plug tip by 70-120°F. If the plug selected is too cold, it will eventually foul and misfire, but it will not damage the engine. A plug which is too hot can cause pre-ignition and detonation, often resulting in a severely damaged engine.
2010
225-240OW10_Motor.indd 229
229
11/10/09 11:05:53 AM
INDEX A Accelerator Pedal .............................. 199,212 Adapters Bulkhead .......30,36,41,42,83,91,118,174,227 Flare ................. 30,35,36,37,38,39,40,41,42, ..................44,45,85,91,138,139,174,227,228 Flare To Pipe ...................30,35,42,43,44,85, .............................................. 91,174,227,228 Fittings .......................30,35,36,37,38,39,40, .............. 41,42,43,44,45,81,82, 83,84,85,86, .................... 90,91, 123,138,173,174,227,228 Additives Break-In.......................................120,167,197 Coolant.........................................64,168,172 Fuel............................................... 34,151,168 Oil .........................................120,151,194,197 Adhesive............................................. 144,205 Air Box, Aluminum (For Radiator) .................. 96 Box, Filter Assemblies .............................111 Box, Radiused Aluminum, Front................... Filters........................................................111 Filter Cleaner ......................................111,141 Filter Oil ..............................................111,141 Gun................................................................ Horn Seal ...................................................... Hose .......................................................... 13 Regulator..........................................13,47,60 Aluminum Angled Stock ............................................ 15 Diamond Plate .......................................... 16 Flat Stock .................................................. 15 Sheets ....................................................... 16 Square Tubing ........................................... 15 Anaerobic Surface Conditioner ................ 126 Aprons .................................................. 33,125 Arm Guard.......................................... 199,202 Arm Restraints ..................94,103,164,171,196 Assembly Lube ........... 47,140,141,143,197,198 Axle Front .............................. 76,122,200,203,208 Nuts (Rear) ............................77,135,203,224 Rear ......................................................... 203 Spacers (Rear) .............................77,135,224 B Balaclavas ......................... 54,154,171,185,187 Ballast ......................................................... 19 Ballast Brackets .......................................... 19 Battery......................................................... 58 Box .....................................................58,204 Charger ................................................ 53,58 Charging Posts .................................... 32,33 Mount ........................................................ 58 Quick Disconnects ....................... 32,33,130 Bead-Loc Rings ..................................176,214 Bead Breakers ......................................12,136 Bearing Spacer .................................... 24,203 Bellhousings..........................................77,134 Birdcages ....................22,77,177,203,209,223 Bearings ............................... 22,122,203,209 Clevis....................................................... 177 Bleeders ......................................... 72,136,174 Block-Off Kits ............................................. 26 Block-Off Plate............................................ 53 Body Components ............................. 199,202 Arm Guards...................................... 199,202 Dash ................................................. 199,202 Floor Pan .......................................... 199,202
230
B - Cont. Body Components - continued Hood................................................... 199,202 Kick Panels ...................................... 199,202 Noses ............................................... 199,202 Bolt Kits Bolt And Nut Kits, Titanium, Complete .. 126 Intake...................................................25,137 Mini Sprint ............................................... 204 Tubular .................................................... 161 Bolts, Studs And Nuts, Titanium .............. 126 Bracket, Fuel Filter/Ballast..................... 21,27 Braided Hose ................................ 29,173,266 Cutter .......................................................... 5 Balance Bar .................................................196 Bias Gauge ..................................................160 Brakes Brackets ............................22,77,136,177,209 Caliper Mounts .............. 22,136,177,209,224 Calipers And Components ....... 215,216,218 Cleaner .......................................... 32,66,108 Ducts .................................................... 28,61 Fluid........................... 34,66,167,196,204,219 Fluid Bleed Kit.................................. 136,196 Hat, Front ................................................ 177 Line......................................... 28,29,211,225 Line Disconnects ................................. 3,210 Line Kit ...................................................... 28 Line Rock Guard ....................................... 76 Master Cylinders And Accessories ............... 28,196,204,218 Pads ............................................ 98,143,216 Pad Spacer ............................................. 210 Pedal ........................................... 96,199,212 Pressure Gauge ................................. 10,219 Pressure Kit.........................................28,118 Proportioning Valves....................28,196,218 Residual Pressure Valves ....................... 218 Rotor Bolt Kit ....................................167,217 Rotors............................. 76,109,176,204,217 Shut-Off Valve ........................................... 28 Speed Bleeder .........................................174 Break-In Additive ...........................69,120,168 Break-In Oil ....................................60,108,172 Breathers Breather Tube Kit .................................... 129 Crankcase ............................................ 24,25 Bump/Rubber Spring Kit ........................ 155 Bumpers........................................96,200,203 C Cabinets Junior Oil Storage .............................. 65,148 Oil Storage ......................................... 65,148 Trailer Door ........................................ 65,148 Cable Tie Holder ......................................... 65 Calipers, Brake .................................. 215,216 Brackets ................................ 22,136,177,209 Camber Adjustment Kit .......................... 182 Camshaft......................................................... Cam Bearings .............................70,73,75,188 Cam Degree Kit......................................... 152 Cam Drives And Components ....... 50,115,176 Canopies ................................................... 140 Holder................................................. 65,140 Car Cover .................................................. 162 Ceramic Engine Seal ................................ 132 Chassis .............................................. 199,202 Blocks ....................................................... 73 Brackets ..............................................15,199
B - Cont. Chassis- continued Components ................................21,199,202 Chassis Level (Smart Tool) .....................7,161 Check Valve (Fuel Tank) ....................... 45,213 Child Safety Seat ...................................... 185 Cleaners Brake And Parts ......................33,66,108,141 Degreaser .............................. 33,66,108,205 Plastic........................................................ 33 Tire .......................................................... 151 Clipboard Dual Timing Systems ...........60,117 Coatings, Flameproof ............................... 207 Coil Over Diaper Pin ............................................... 155 Hydraulic Coil Over Spring Adjuster ........ 23 Kits .............................23,46,153,154,155,157 Shock Adjusting Tool ..............46,58,108,132 Shock Cover/Protector .......23,75,78,141,154 Snap Ring ............................................... 155 Spring Rubbers ......................................... 46 Springs ............................ 87,100,158,179,186 Coil Wires ............................................129,133 Compression Tester................................9,143 Connecting Rods . 63,71,73,80,99,110,140,178 Cool Shirt .................................................... 71 Coolant Additives...........................64,168,172 Couplers (10-10) ..................................177,223 Spiral Pin ....................................................... Crankcase Breathers .................................. 25 Crankshafts .........................80,99,110,121,178 Hub ............................................................ 25 Crew Shirts ............................................... 185 Crimp Tools ...............................32,45,132,194 Cylinder Heads ........................................... 59 Gaskets .............................. 66,88,89,137,179 Cylinder Markers, Plug Wire ..................... 132 Cylinder Wiper (Wing) ............................... 135 D D-Cel Harness .......................................... 100 D-Rings .................................................. 6,100 Deburring Tool .............................................. 4 Degreaser........................................ 33,66,108 Dial Caliper.................................................... 7 Dial Indicator ................................................. 7 Diamond Plate ............................................ 16 Digital Tachometers ......... 118,160,189,192,212 Disconnects, Steering Wheel ...... 119,190,219 Distributor Gears, Magneto/Distributor.................... 133 Hold Down ......................................... 25,133 Dollies............................................................ 7 Drag Links ................................................. 201 Tether ................................................... 15,61 Drain Pan, Quick Change .........14,32,114,206 Drill Bits .....................................................4,16 Driveshafts ...............................77,122,135,177 Driving Gloves ................ 55,102,163,170,171,184,187 Harness ................................102,163,171,185 Shoes .................55,103,163,170,171,184,187 Suits ............... 52,55,93,102,164,171,184,187 Dry Sump Tanks............................. 24,146,175 Mounting Kit................................. 24,146,175 Durometers .........................................104,161 E Ear Plugs ....................................................... 5
2010
225-240OW10_Motor.indd 230
11/10/09 11:05:57 AM
INDEX E - Cont. Electric Fuel Pump ...................................... 27 Enamels.......................................... 80,147,207 Engine Assembly Lube ..................... 47,108,140,141, ......................................144,168,188,194,197 Bearings .................................. 66,70,112,188 Blocks ................................................ 73,225 Cradles ........................................................ 7 Heater................................................... 87,99 Stand Drip Tray ....................................... 107 Stands ......................................................... 7 Storage Cases ........................................ 175 Epoxy ................................................. 132,205 Exhaust Block Off Plates ........................................ 26 Gaskets .......................................137,179,181 Headers................................................... 181 System .................................................... 204 Turn-Outs ................................................ 181 F Fasteners, Quick Turn ........................... 17,131 Feeler Gauges ....................................8,26,119 Filters Air .............................................................111 Crankcase Breathers ...............................111 In-Line Fuel ......... 27,45,146,173,191,213,219 In-Line Oil ................................................ 145 In-Line Scavenge .................................... 145 Oil ........................................... 92,111,141,191 Oil Fitting With Filter Screen ................... 145 Pre-Filters ............................................... 141 Fire Brackets ........................................................ Extinguishers .................................... 7,89,95 Suits ........................... 52,55,164,171,184,187 Firewall Grommets ......................................... 137,182 Fittings Accessories ...............30,35,36,37,38,39,40, .........................41,42,43,44,45,81,82,86,107 Adapter ................................ 30,35,36,40,41, .............................42,43,44,45,82,83, 74,85, .................... 86,91, 123,138.139,174,227,228 Bulkhead ......36,41,42,83,91,107,118,174,227 Caps And Plugs ........................ 10,36,41,43, .............................. 44,45,84,86,139,227,228 Fuel Pressure Regulator ............... 45,98,146 Hose ...................... 30,37,38,39,43,44,45,81, .......................................82,138,139,225,226 Oil Pressure Gauge ............................30,225 Oil Pump ................................ 40,45,145,228 Oil Tank .................................... 40,42,45,146 Oil With Filter Screen .............................. 145 O-Rings ...........................................36,44,86 Qwik Release .................................30,44,174 Tube ......................................... 36,41,82,226 Weld ............................................ 44,109,225 Flameproof Coatings ................................ 207 Floor Jacks.........................................13,47,60 Fog Blocker ............................................... 141 Fogging Oil .................................................. 34 Freeze Plug ............................................... 147 Freeze Plug Driver Set .................................. 8 Friction Modifier ........................................ 197 Front Axles .............................76,200,203,208 Front Bumpers ..............................96,200,203 Front Cover ................................................115
F - Cont. Front Hubs ......... 76,134,136,176,208,214,224 Drive Pins ................................................ 224 Front Spindles ............................... 76,134,203 Front Wing Post ............................ 78,122,200 Fuel Additive ...............................................34,151 Block ................................................ 135.210 Bypass .....................................................112 Drum Pump .......................................... 10,27 Fill Plate .............................................. 92,109 Filter Brackets ........................................... 27 Filter Clamps .......................................27,135 Filters.............. 27,45,86,146,173,191,213,219 Fragrances ................................................ 34 Injection Systems ...............................99,112 Logs ........................................................ 123 Lubricant ...................................... 34,151,168 Pressure Gauge ......................3,10,27,32,45, .............................................. 49,118,160,189 Pressure Regulator Fittings ...... 35,40,42,45, .............................................118,146,160,189 Pressure Regulators ............................ 45,98 Pumps ........................................ 10,27,92,98 Shut-Off Valves ....................... 86,112,135,213 Tail Tank ......................................... 47,92,175 Y-Fittings ................................................. 123 Funnels ...................10,27,107,138,152,175,206 Wall Rack .................................................. 97 G Gaskets Exhaust/Header .............. 88,137,142,179,181 Head ................................... 66,88,89,137,179 Intake Manifold ....................... 88,89,137,179 Kits .......................................................... 188 Makers/Sealants .............................. 144,205 Quick Change Gear Cover .................. 31,88 Oil Pan .......................................... 88,137,179 Peeler/Remover ...................................... 205 Valve Cover .............................. 24,25,88,129 Water Pump ........................................24,179 Gas Pedal.......................................20,199,212 Gauge Panel Gauge Mounts .......................................... 96 Pilot Lights .................................................... Warning Systems ....................... 118,160,167 Gauges Accessories .................................. 32,49,189 Adapters.................................................... 49 Air Density................................................118 Digital Tachometers ......118,160,189,192,212 Durometers ............................................. 161 Fuel Pressure .....................3,10,27,32,45,49, .............................................. 50,118,160,189 Hot Lap (In-Car Timing System) ..............117 Isolators .................................................. 182 Oil Pressure................. 32,49,50,118,160,189 Oil Temperature ................. 32,49,50,118,160 Panels ..................................................... 160 Tire ..... 13,46,47,104,109,117,132,143,161,192 Two-Gauge Mount ........................................ Water Temperature ....... 32,49,50,118,160,189 Gear Bag ............................................ 103,185 Gear Change Tray .............................................. 14 Magneto/Distributor ............................... 133 Oil .............................60,108,120,168,197,206 Quick Change .................... 159,180,220,222 Tote Box .........................................14,32,159
G - Cont. Gel Lube .................................................... 205 Gloves .......................... 33,55,94,102,125,163, ............................................. 170,171,184,187 Goggles ..................................................... 142 Grease ....................... 31,120,168,172,205,206 Gun.............................................................. 9 Grommets, Firewall ............................. 137,182 Grooving Iron ........................................12,103 H Hand Cleaners .......................................... 144 Hanging Brackets ..................................... 148 Harnesses, Driver ................... 94,103,164,185 Harness Pads.................................94,164,185 Head And Neck Restraint Systems .......... 100 Headers..................................................... 181 Bolts ........................................... 138,142,189 Gaskets ...................... 88,89,137,142,179,181 Rack .......................................................... 97 Head Gaskets ...................... 66,88,89,137,179 Head Socks.................. 54,94,170,171,185,187 Heat Barrier ............................................... 195 Heat Sleeves .......................................125,170 Heat Sleeving ......................................133,195 Height Gauge .............................................. 13 Heel Riser ............................................3,20,96 Helmets .............................. 54,93,101,163,183 Accessories ...................... 54,93,101,163,183 Bags ................................. 54,94,103,163,185 Components............................54,93,163,183 Pivot Kits .......................... 54,93,101,163,183 Post Kit .........................................93,163,166 Restraint ..........................94,103,164,171,186 Shield Buttons .................................. 163,195 Shield Protector ............................... 166,185 Shields .............................. 55,93,101,163,183 Skirts .................................................... 54,94 Speed Tabs ............................................. 166 Supports............. 94,103,163,171,186,187,195 Tear-Offs ......................................54,166,195 High Speed Bypass .................................. 210 Hitches ...................................................... 169 Accessories ............................................ 169 Hold Down, Magneto/Distributor ........ 25,133 Hole Saw Set .................................................. Hood................................................... 199,202 Blanket .................................................... 211 Hose ...................37,38,39,43,44,45,81,82,173 Assembly Lube ......................................... 39 Braided .....29,37,38,39,43,44,45,81,173,226 Clamps..........................................26,82,225 Clamp Pliers ........................................... 225 Cutter .......................................................... 5 Ends ...........................35,36,37,38,39,43,44, ...................... 81,82,90,138,139,173,226,227 Fittings ........ 35,36,37,38,39,40,41,42,43,44, ............................. 45,81,82,84,85, 86,90,91, ....................... 138,139,173,225,226,227,228 Fittings, Qwik Release ...................30,44,174 Lightweight ............................................... 38 Radiator..................................................... 26 Socketless Fitting Assembly Tool ............ 39 With Fittings ....................................... 39,225 How To Books ........................................... 181 Hubs Front ...........76,109,134,136,176,208,214,224
2010
225-240OW10_Motor.indd 231
231
11/10/09 11:05:57 AM
INDEX H - Cont. Hubs - continued Drive Pins ................................................ 224 Stud Kit ................................................... 134 Hutchens Device ....................................... 100 Hydraulic Coil Adjuster ............................... 23 Hydrometer Kit ............................................ 67 I Ignition Panels ............................... 32,118,160 Ignition Systems ....................................... 123 Coil Wires ..........................................129,133 MSD Box Mount ............................. 3,32,133 Spark Plug Wire Sets ... 123,129,133,193,219 Vibration Isolator Mounts ....................... 133 Inspection Plug ......................................... 211 Intake Rail Spacer ..................................... 147 J Jacks ..................................................13,47,60 Jack In A Pouch (Jack Hanger) ......... 65,149 Jack Stands ................................................ 13 Jacobs Ladders .............. 77,122,200,204,209 Quick Pin Kits ......................................... 126 Jam Nuts .............19,20,48,77,78,122,200,209 Jugs .......................................................10,107 K Kill Switch.................................................. 161 King Pins ...................76,134,174,203,208,224 Caps ................................................. 176,224 Bushings ...........................................122,176 Knee Guard .................................... 15,170,195 L Lap Timer System ............................... 105,117 Lash Wrenches ........................... 8,26,119,152 Leakdown Tester.......................... 118,152,210 Level Tray ................................................7,161 Lifters ........................................ 68,71,105,121 Lifter Valley Riser Tubes .......................24,146 Line Clamps ................................................ 19 Lubricants ..............................123,144,151,188 Hose Assembly Lube................................ 39 Penetrating..........................................66,172 Rear Axle................................................. 223 Lug Nut...................................................... 136 M Magic Seal ............................................. 123 Magnet .......................................................... 8 Magnetos ............................................123,133 Cap And Rotor ..................................123,133 Static Timer ............................................. 123 Transformer ............................................. 123 Main Bearing Cap ..................................... 156 Main Bearing Spacer .................................. 24 Master Cylinders Kits ................................................... 196,204 Mini Sprint/Kart ...................................... 218 Remote Reservoirs ......................28,196,218 Replacement Parts ................... 196,204,218 Metal Polish .............................................. 120 Mini Sprint Components................... 175,202, .................................................. 203,204,218 Moose Blocks ............................................. 13 Moly Paste ............................................26,126 Motor Mounts ......................................26,204 Motor Plates ..............................26,78,199,211 Motor Oil ....... 60,108,114,120,168,172,197,206 Mud Covers.................................... 31,176,214 Mud Release Solutions ................... 33,34,139 Mud Scrapers ............................................... 5 232 2010
225-240OW10_Motor.indd 232
M - Cont. Mufflers ...............................................181,190 Insert ....................................................... 181 N Neck Supports ............94,163,171,186,187,195 Nerf Bars .......................................96,200,203 Nets, Roll Cage ......................................... 171 Nose Wings ........................................200,204 Nose Wing Tray ........................................... 97 Nozzles Filter ........................................................ 209 Plugs ..................................................84,209 Nurf Bars ..................................................... 96 Nut And Washer Kit .................................. 212 Nyloc Nuts .................................................. 20 O Oil Bypass Eliminator .............................. 63,128 Drain Pan ......................... 14,32,114,159,206 Drain Pan ................................................ 138 Filter Adapters .............................. 53,63,128 Filter Block-Off Plate ..............53,63,128,145 Filter Bracket ........................................ 53,63 Filter By-Pass Plate ...................... 53,63,128 Filter Cutter ................................ 119,136,152 Filter Mounts, Remote .................. 53,63,191 Filter Pre-Filter Screen............................ 128 Filters............................. 111,128,145,191,219 Gear Oil ........................... 60,92,108,120,168, ............................................172,197,206,223 Inlet Fittings ................................. 14,128,145 Motor Oil ........... 60,108,114,120,168,172,206 Pans ................................... 62,64,72,127,150 Pan Gaskets ................................. 88,137,179 Pan Inspection Plug Kit ......................62,127 Preheaters ............................................... 128 Pressure Gauge Fitting ................. 30,86,146 Pump Fittings .......................35,40,41,45,145 Pumps ..................................... 53,62,145,191 Stud Kit ................................................... 127 Restrictors.....................................14,127,189 Stabilizer .................................... 120,151,194 Tank Heaters .....................................128,146 Tank Heater Plug..................................... 161 Tank Mounting Brackets .............. 24,146,175 Tanks And Fittings ... 24,35,40,41,45,146,175 Oil Eater....................................................... 33 P Paint ............................................... 80,147,207 Paint Markers .............................................. 12 Paper Towel Holder .............................. 97,148 Penetrating Lubricant ...........................66,172 Pills ....................................................... 99,213 Pinion Nut Assemblies, Posi-Lock ........... 224 Pistons ........................75,107,121,156,178,219 Piston Rings ..........97,107,121,142,178,188,198 Piston Ring Tools ..................9,47,152,188,198 Pit Gun .......................................................119 Pit Jacks .............................................13,47,60 Dirt Wing .............................................. 13,47 Pitman Arms ....................22,122,136,208,224 Plastic Cleaner ............................................ 33 Plastic Sheets ............................................. 16 Plastigauge ............................................... 188 Plugs And Caps (Fittings) ................ 10,36,41, ........................................... 43,44,45,139,174 Points Box Mounting Panel ................. 96,133
P - Cont. Polish, Magic Mix® .................................... 205 Poly Washers .............................................. 36 Porting Kits ............................................... 187 Positive Cam Lock Shifters And Cables .... 20 Power Steering Fluid..................... 66,95,108,115,168,172,190 Gears...................................................95,115 Mount Adapters ................................. 65,135 Pump And Adapter ...................... 95,115,190 Tank ................................................ 21,95,115 Top Plate ................................................... 96 Pre-Filters For 3" Crankcase Breather ..................... 141 For 600cc Mini Sprint ............................. 141 For Carbon Fiber Air Box ........................ 141 For Fuel Funnels ..................................... 141 For Fuel Injection .................................... 141 Prep Stand .................................................. 11 Proportioning Valves............................ 28,218 Punch And Flare Tool.................................... 4 Pushrods ...............................................68,124 Length Checker ...................................... 123 Pyrometers...................67,105,109,117,167,192 Q Quick Change Accessories And Components.......14,31,78, ...................................... 79,159,220,221,222 Breather Assembly ............................ 32,220 Cover Lock Kit .......................................... 31 Cover Nuts ..........................................31,211 Drain Pan ......................... 14,32,114,159,206 Gear Cover Gasket .............................. 31,88 Gear Covers ..................................... 221,222 Gear Poster ............................................. 222 Gear Sets .................... 159,180,220,222,223 Lower Shafts .................................... 220,221 Oil Plug Sockets And Wrenches ..... 159,222 Rear End Assemblies ........................ 78,220 Side Bell O-Ring ...................... 31,78,79,220 Thru Bolt Kit ....................................... 79,220 Quick Connect Battery Charging Posts 32,33 Quick Release Pins ................................... 131 Quick Turn Fasteners ............................ 17,131 Accessories..........................16,17,18,131,132 Mounting Brackets .............................. 17,131 Reinforcing Plates ............................... 17,131 Springs ................................................ 17,131 Wrenches ......................................... 5,16,131 Quick Release Steering Wheel Hubs ...... 21, ...............................................95,115,119,190 Qwik Release Hose Fittings ..............3,44,174 R Racer’s Tape ................................................. 6 Racing Radios......................................... 165 Racing Suits ......................................... 52,164 Racks, Storage 8-Piece Shock ........................................ 149 Adjustable Tire ........................................ 149 Fuel Jug.............................................. 65,148 Gear Case Storage ................................. 149 Torsion Bar .............................................. 149 Radiators .....................................64,87,95,175 Air Box....................................................... 96 Caps ..................................................... 26,64 Hose .......................................................... 26 Honey Comb Protector ................... 3,26,210 Repair Kit ............................................. 44,46
11/10/09 11:05:57 AM
INDEX R - Cont. Radiators - continued Rock Screen ............................................. 96 Super Coolant .....................................64,172 Radio Communication Systems And Accessories .............................162,165 Driver Listening-Only ..........................21,162 Radius Rods........................... 23,122,201,203 Brackets .................................................. 201 Radius “Rod Ruler”............................ 71,212 Ratchet Binder .............................................. 6 Ratchet Strap Holder .................................. 97 Rear Axle Lubricant .......................................... 108,223 Nut Wrench ........................................ 77,222 Nuts ..............................................77,211,224 Spacers .............................................. 77,224 Rear Bumper .................................96,200,203 Rear End Assemblies, Quick Change ............... 78,220 Components ..............................31,32,78,79, .................................... 109,211,220,221,222 Saver ....................................................... 209 Rear Main Seals ....................... 88,137,147,179 Rear Splined Wheel Center ................. 77,176, .................................................. 210,214,224 Remote Reservoirs (Master Cylinder).........................28,196,218 Restraints Arm ........................................ 94,103,164,186 Driver ..................................... 94,103,164,185 Head And Neck..............................61,94,100 Helmet ..................................... 61,93,164,186 Seat (Head, Shoulder, Leg)...........61,113,114 Sternum Protector .................................. 185 Rev Kit ......................................................... 70 Rim Shells ................................................. 214 Ring And Pinion Assemblies ...................... 78 Ring Compressor ............................. 47,50,152 Ring Filer .......................................... 9,152,188 Rivets .......................................................... 18 Guns ........................................................4,16 Rocker Arm Stud Girdles ............................ 26 Rod Ends........................... 47,48,158,200,209 Cone Spacers ......................................... 134 Seals ....................................................... 182 Roll Bar Padding ................ 15,107,119,167,186 Roll Cage Nets .................................... 171,186 Roller Rocker Arms ..........................68,71,191 Rotor Mounts .............................76,77,177,211 Rotors............................... 76,109,176,204,217 Rotor Heat Shield...................................... 167 RPM Module Kits ...................................... 133 S Safety Glasses .............................................. 5 Safety Wire .................................................... 5 Drill Jig ................................................. 5,212 Twister Pliers ............................................... 5 Scales..................................... 104,116,161,167 Cart ...................................................104,116 Pad Levelers ............................................116 Schrader Valves .......................................... 31 Scrub Bags ............................................... 141 Sealants .................................................... 144 Seats .............................................. 61,113,195 Lumbar Support ......................................114
S - Cont. Seats - continued Restraints ........................... 15,61,94,103,164 Set Up Blocks ............................................. 13 Shelves Aerosol Spray Can ............................. 65,148 All-Purpose Bottle ............................. 65,148 Helmet ..................................................... 148 Shield Protector ........................................ 166 Shifters And Cables .........................20,78,135 Shift Lever ........................................20,78,135 Shims (Spindle) ......................................... 135 Shock Absorbers ............................. 46,56,57, ........................................58,153,154,155,157 Bearing End ............................ 46,57,155,157 Bearing Mount ........................ 46,57,155,157 Bumper ........................................46,155,157 Cover/Protector .............23,56,75,7,141,1548 Dynamometer ......................................... 105 Extensions ......................................... 46,155 Inflators ...............................................58,118 Oil ................................................. 58,157,168 Pin Kit ................................................. 23,122 Rebuild Kits.........................................58,157 Tool Kit ................................................58,157 Tuning Kits ..........................................58,157 Work Station ........................................... 109 Shoes ....... 55,94,103,163,170,171,184,185,187 Shrink Sleeves .......................................... 130 Shut-Off Valves, Fuel ......................... 135,213 Silicone Sealer ...................................................... 205 Tape, Self Vulcanizing............................. 133 Slick Mist................................................... 120 Smart Level Tray .....................................7,161 Tool........................................................7,161 Snips ............................................................. 4 Socks ............................................. 94,171,184 Spacer Tray ................................................. 97 Spanner Wrench ..................... 46,109,155,157 Spark Plugs ................................. 47,66,73,139 Boot Heat Sleeve ..........129,130,132,133,194 Boot Protectors ......................... 130,132,194 Indexers ............................................... 9,130 Indexing Washers ................................... 130 Wire Sets ...................... 123,129,133,193,219 Wire Removal Tool ............................... 9,194 Speed Screen ........................................... 141 Spindles Midget ..................................................... 136 Mini Sprint ............................................... 203 Shorty.................................... 76,134,136,176 Nuts, Bearings, Shims ..........76,134,136,224 Springs Coil Over ......................... 87,100,158,179,196 Kit, Bump/Rubber .............................. 46,153 Tester ...................................................... 105 Stack Stands............................................... 13 Stagger Gauges ..................................... 14,31 Tape...................................................... 14,31 Steering Arms ..................... 21,22,76,122,177,208,224 Components ......................21,22,76,122,203 Gear .......................................................... 15 Gear Mount ................... 3,21,22,115,122,208 Wheels .....................61,109,119,190,201,209 Wheel Disconnects ......... 21,115,119,190,219 Wheel Kill Switch .................................... 161
S - Cont. Steering - continued Wheel Pad .............................. 21,114,119,190 Wheel Extension ....................................... 21 Sternum Protector .................................... 185 Stopwatch Clipboard .......................... 117,161 Stopwatches .................................... 5,118,166 Stud Girdles ........................................... 26,70 Straps, Tie Down .......................................... 6 Suits, Driving ................... 102,164,171,184,187 Support Clamps.......................................... 19 Support, Head, Leg And Shoulder (Seat) ....................... 15,61,113 Support, Neck Collars ... 103 ,163,171,186,195 Switches......................32,118,130,160,167,197 Switch Panels ................................ 32,118,160 T Tachometers ...................118,160,189,192,212 Mount ........................................................ 96 Tail Tank ........................................... 47,92,175 Bladders ............................................... 47,92 Cooler...................................................... 211 Tank Bleeder ............................................... 87 Tank, Power Steering .................................. 21 Taps .......................................................... 4,21 Tape Electrical ..................................................... 6 Gaffer’s........................................................ 6 Gun.............................................................. 6 Non-Skid ..................................................... 6 Racer’s ........................................................ 6 Shipping ...................................................... 6 Surface Guard ............................................ 6 Teflon....................................................... 138 Tape Measures ..........................13,31,116,161 Tear-Offs ........................................54,166,195 Thread Chaser ........................................... 4,9 Thread Files .................................................. 4 Thread Lockers And Sealant .........51,144,205 Throttle Arm ................................................... 122,209 Bell Crank...........................................20,209 Cable ......................................................... 20 Linkage Kit ....................................... 122,209 Pedal ............................................20,199,212 Tie Down Hangers .................................... 148 Tie Down Straps ........................................ 5,6 Tie Rods .................................................... 201 Tie Wraps ...................................................... 5 Timing Gear Drive ............................ 24,67,147 Timing Lights.........................................87,132 Timing Systems ....................... 60,105,117,161 Tires Bead Breakers ....................................12,136 Caliper ..................................................... 192 Cleaner .................................................... 151 Durometers .......................................104,161 Gauge Holder............................................ 97 Grinding Discs .......................................... 12 Groovers .............................................12,103 Markers ...............................................12,138 Prep Stand ................................................ 11 Pressure Gauges .............. 13,46,47,104,109, .......................................117,132,143,161,192 Pressure Relief Valves ........................ 72,114 Pyrometers............................117,126,167,192 Relief Pre-Setter Gauges.................... 31,114
2010
225-240OW10_Motor.indd 233
233
11/10/09 11:05:57 AM
INDEX T - Cont. Tires - continued Sander ....................................................... 12 Sipers ..................................................12,136 Spoons ...................................................... 12 Stagger Gauge..................................... 14,31 Stand ......................................................... 11 Tape Measurer ............................... 13,31,116 Tool.............................................................. 3 Treatments ..........................................34,151 Valve Core Tools .................................. 13,31 Toe Plate Kit .............................. 13,60,116,192 Tools Adjustable Wrench ................................... 11 Angle Finder ............................................ 150 Cam Bearing Installation ............................ 8 CC Kit ...................................................... 150 Chassis Level (Smart Tool) ...................7,161 Compression Tester .............................9,143 Cubic Inch Tester .................................... 150 Dial Calipers ................................................ 7 Dial Indicator ............................................... 7 Double Flare Tool ................................... 9,28 Drill Bits ...................................................4,16 Durometers ............................................. 161 Feeler Gauge Holder................................119 Feeler Gauges..................................8,26,119 Fuel Pressure Checker .......................27,210 Hose Clamp Pliers .................................. 225 Hose Cutter ................................................. 5 Impact Gun ..............................................119 Lash Wrenches .....................................8,119 Leakdown Tester........................ 118,152,210 Level Tray ..............................................7,161 Notchers ..................................................... 7 Oil Filter Cutters ......................... 119,136,152 Oil Plug Sockets And Wrenches, Quick Change ..................................14,159 Pinion Depth Checker ............................. 191 Pliers, Crimping ................................132,194 Punch And Flare ......................................... 4 Pushrod Length Checker........................ 123 Pyrometer .............................117,126,167,192 Quick Turn Fastener Wrench ........... 5,16,131 Radius â&#x20AC;&#x153;Rod Rulerâ&#x20AC;?............................ 71,212 Ring Filer ........................................ 9,152,188 Rivet Gun ................................................4,16 Rod Bolt Stretch Gauge ......................... 152 Rod Guide Tool ........................................... 9 Safety Wire Drill Jig.............................. 5,212 Safety Wire Twister Pliers ........................... 5 Snips ........................................................... 4 Socketless Fitting Assembly Tool ............ 39 Spanner Wrenches ............... 46,109,155,157 Spiral Lock Removal Tool ........................... 9 Stagger Gauges ........................................ 14 Tape Measures ........................13,31,116,161 Taps ........................................................ 4,21 Telescoping Magnet ................................... 8 Telescoping Mirror ...................................... 8 Thread Chaser/File .................................. 4,9 Threaded Tubing Ends.............................. 21 Timing Lights ......................................87,132 Tire Bead Breakers .............................12,136 Tire Caliper .............................................. 192 Tire Crayon..........................................12,138 Tire Prep Stand ......................................... 11 Tire Pressure Gauges .....................13,46,47, ................................ 104,117,132,143,161,192 234 2010
225-240OW10_Motor.indd 234
T - Cont. Tools - continued Tire Sander................................................ 12 Tire Sipers ...........................................12,136 Tire Spoons ............................................... 12 Toe Plate Kit ................................. 13,116,192 Torque Tube Checker ............................. 212 Tubing Bender........................................ 8,45 Tubing Cutters ....................................... 9,28 Tubing Notchers ......................................... 7 Wrench -AN (Dry Sump Hose Ends) ........ 11 Wrench Sets.............................................. 11 Valve Lash Wrenches ................................. 8 Valve Seat Pressure Testers ............. 119,132 Valve Spring Compressors ............ 9,132,152 Valve Spring Removal Tools ....................119 Valve Spring Tester .................... 119,150,152 Tool Tray ..................................................11,97 Top Wings ............................................96,204 Wing Tree .............................96,200,204,211 Torque Balls .................... 77,134,208,223,224 Collars .............................................. 134,224 Housings ...............................77,134,208,224 Housing Seal ........................................... 182 Shield ................................................... 61,96 Torque Tubes ..........................77,134,209,223 Hoop ....................................................... 199 Seals ....................................................... 182 Torsion Arms ........22,76,122,134,203,208,223 Torsion Bars ...................... 76,122,134,177,186 Bushings ............................... 76,122,177,203 Reamer .................................................... 212 Torsion Bar Plugs........................................ 11 Torsion Stops .......22,76,122,126,203,208,224 Towels ........................................................... 5 Track Mats .................................................. 11 Trailer Door Accessories ...............65,148,149 Transponder Mount .................................. 210 Tubing, Aluminum And Steel ......14,15,23,201 Bender.................................................... 7,45 Cutters ................................................... 9,28 Ends .......................................................... 21 Notchers ..................................................... 8 Tubular Bolts ............................................. 162 U U-Joint Assemblies ....................... 77,135,177 Underwear ................... 55,94,170,171,185,187 Upper Lube ................................................. 34 Utility Jugs ......................................92,107,175 V Valves ....................................................74,124 Cover Breathers ...................................... 129 Cover Gaskets ................... 24,25,88,129,137 Covers ....................... 25,59,128,175,201,210 Cover Stud Kits .................................129,137 Lash Caps ...................................... 70,74,123 Lash Wrenches ......................... 8,26,119,152 Locks................................. 70,74,105,110,124 Seat Pressure Testers....................... 119,132 Springs ...................................69,106,110,124 Spring Compressors ........................132,152 Spring Removal Tools ..............................119 Spring Tester ........................105,119,150,152 Trays (Valvetrain) ..................................... 107 Retainers ........................... 69,74,105,110,124 Valve Core Tool ................................ 13,31,117 Valve Stems .......................................31,74,89 Valve Stem Seals ........................................ 25 Van May Quick Fix Tool .............................. 14
T - Cont. Vibration Isolator Mounts (Points Box) ..... 133 W Warning Light Kits............................... 118,167 Wash Plugs .............................................. 3,10 Water Pumps ................................115,151,168 Water Treatment .................................... 64,66 Weather Stations ........................................ 67 Weld Bungs .............................. 44,84,109,225 Wheels ................................................176,214 Accessories ......................................176,214 Center, Rear Splined...... 77,176,210,214,224 Disconnects (Center Reliefs) ............... 31,72 Halves ...............................................176,214 Savers ..................................................... 177 Spacers ........................................ 77,134,136 Wrenches ......................................... 5,77,175 Windage Tray Screen............................62,127 Window Nets ....................................... 171,186 Wings ...................................................96,200 Adjuster ..........................................19,78,135 Caps .......................................................... 19 Components ..................78,122,135,200,210 Cylinders ........................................19,78,190 Nose ...................................................96,200 Slider Valve ..................................78,135,190 Top ............................................................ 96 Trees............................................ 96,200,211 Wire Separators .......................25,130,137,194 Wire Sleeve ........................... 129,130,132,194 Wiring Harness ..................................................... 33 Terminal Kit ............................................... 33 Wrenches Adjustable ................................................. 11 Quick Turn Fastener..............................5,131 Spanner................................. 46,109,155,157 Valve Lash ................................. 8,26,119,152 -AN (Dry Sump Hose Ends) ...................... 11 Wrench Sets.............................................. 11 Wrist Pin Retainers ................................... 219
11/10/09 11:05:58 AM
VENDOR LIST
2010
225-240OW10_Motor.indd 235
235
11/10/09 11:05:58 AM
VENDOR LIST
236
2010
225-240OW10_Motor.indd 236
11/10/09 11:06:06 AM
SET-UP SHEET Date _______ Event___________________________________________ Track __________________________
Temperature
Humidity
Corrected
Gear
Tach
Main
High Speed
Pill
LF
RF
LR
RR
OFFSET
LR
BARS
Altitude
SHOCKS
Muffler
Position
LF
+/-
RF
+/-
LR
+/-
RR
+/-
TIRES LR
RR
RR
Yes
No
Lbs.
STAGGER
Position
Altitude
Temperature
Humidity
Corrected
Gear
Tach
Main
High Speed
Pill
SHOCKS
Notes:
LF
RF
LR
RR
OFFSET
LR
BARS
HEAT
TIME TRIAL
Car __________________________________ Motor ______________________________
LF
+/-
RF
+/-
LR
+/-
RR
+/-
TIRES LR
RR
RR
Lbs.
STAGGER
Position
Altitude
Temperature
Humidity
Corrected
Gear
Tach
Main
High Speed
Pill
SHOCKS
LF
RF
LR
RR
OFFSET
LR
BARS
DASH
Notes:
LF
+/-
RF
+/-
LR
+/-
RR
+/-
TIRES LR
RR
RR
Lbs.
STAGGER
Position
Altitude
Temperature
Humidity
Corrected
Gear
Tach
Main
High Speed
Pill
SHOCKS
LF
RF
LR
RR
OFFSET
LR
BARS
FEATURE
Notes:
LF
+/-
RF
+/-
LR
+/-
RR
+/-
TIRES LR
RR
RR
Lbs.
STAGGER
Notes:
2010
225-240OW10_Motor.indd 237
237
11/10/09 11:06:14 AM
DECIMAL CONVERSION CHART
238
2010
225-240OW10_Motor.indd 238
11/10/09 11:06:15 AM
NEW!
NEW!
2010
225-240OW10_Motor.indd 239
239
11/12/09 11:49:41 AM
READY TO BUILD? READY TO RACE?
READY TO WIN? Then Youâ&#x20AC;&#x2122;re Ready For Allstar Performance Parts! Cody Darrah
Bryan Clauson Photo By: Jim DenHamer
ALL55000, ALL55002
ALL55010, ALL55012
ALL55062, ALL55060
ALL55040, ALL55042
Aluminum Front Torsion Arms
Aluminum Rear Torsion Arms
Aluminum Steering Arms
Aluminum Birdcages
ALL55020
Aluminum Rear Torsion Stop
ALL55070, ALL55072
Aluminum Brake Mounts
ALL52115, ALL52116, ALL52117
Aluminum Steering Mounts
VISIT ALLSTARPERFORMANCE.COM FOR WEEKLY UPDATES! Here is a sampling of the more than 3,000 Allstar Performance specialty parts and tools, many specifically engineered for the short track racer. In the shop, at the track, updating the current car or building a new car, Allstar is ready to help. Call or visit the Allstar website for our new catalog. Available at performance parts dealers worldwide.
269-463-8000
240 2010 www.allstarperformance.com
225-240OW10_Motor.indd 240
11/10/09 11:06:19 AM